F.W. WEBB COMPANY
Sheet
The Webb Industrial News is a Quarterly Catalogue of F.W. Webb Company
VALVES / AUTOMATION
PIPE / TUBING / FITTINGS / FABRICATION
WINTER Winter2007 2010
HVAC/R EQUIPMENT / CONTROLS
FELKER Made In The USA
Wheatland
PLUMBING
INDUSTRIAL SPECIALTIES
PUMPS
ARMSTRONG
In This Issue: In the News.....................................2-3
Webb Pump..................................... 15
Refrigeration.................................... 25
Pipe & Tubing.................................... 4
Webb Kentrol/Sevco...................16-18
Institutional/Property Management.... 26
Valves............................................5-9
Webb USCO – Plastics................19-20
Industrial Specialties....................27-28
Hose................................................ 10
Webb BioPharm............................... 21
Tools..........................................29-30
Webb Piping Solutions....................... 11
Webb HVAC/R & Controls................ 22
Safety.........................................30-31
Specialty Process Piping & Hose Solutions.........................12-13
Webb HVAC – Energy Saving Commercial Equipment.................... 23
Fire Protection.................................. 14
Webb HVAC/R – Source 1 Parts....... 24
In the
News . . . F.W. Webb announces $9 million plan to locate in Springfield Memorial Park
A plumbing and heating distribution center, which has announced plans to locate at the Springfield Memorial Industrial Park in East Springfield, will invest about $9 million in the project and create approximately 40 jobs. F.W. Webb Company announced that it will purchase 14.3 acres at the city-owned industrial park for $1 million, and will construct a twophase distribution center costing about $8 million.Each phase will be about 65,000 square feet. The industrial park is located Edward J. Welch, Regional Manager of on Performance Boulevard,off F.W. Webb Co., at the podium. Looking on, from left, are Michael F. Golden, president Roosevelt Avenue. F.W. Webb is the largest dis- of Smith & Wesson, Kateri B. Walsh, Springfield city councilor, John D. Judge, tributor of plumbing, heating, chief development officer, and Springfield cooling, and piping products Mayor Domenic J. Sarno. in the Northeast, and will become the second tenant of the industrial park. The city purchased the land from Smith and Wesson in 2006, and secured its first tenant, Performance Food Group, in 2007. Local officials, including Mayor Domenic J. Sarno and Chief Development Officer John D. Judge, gathered at the industrial park, to welcome F.W. Webb during a press conference Tuesday. The company will initially employ 20 people and is expecting to grow to 40 to 50 people over the next few years, said Ed J. Welch, F.W. Webb’s regional manager in Methuen. Most of the jobs will pay between $12.50 per hour for warehouse work to the low-$20 range, Welch said. The distribution center will be built in two phases, expected to begin in the spring. The company will continue to operate smaller plants in Northampton and Greenfield, and is also opening new sites in Hyannis and Boston. “We are thrilled to have a blue chip company like F.W. Webb announce expansion plans for a facility in our city,” Sarno said.
Jack Hester, a 41-year veteran of F.W. Webb who served as its long-time president, and most recently its chairman, announced his retirement effective January 1, 2010. In addition to his valuable contributions to F.W. Webb, Hester has been a tireless industry supporter throughout his career, including president of the American Supply Association. Jack Hester Chairman Hester embodies all of the characteristics F.W. Webb Company one wants in a leader in any industry — strength of character, honesty, integrity, loyalty and a strong work ethic. In the January issue of the Wholesaler Magazine, their editorial director Mary Jo Martin, who has great regard for Jack, will share an exclusive Q&A article that she conducted with him upon hearing the news of his pending retirement. We wish Jack all the best!! Harry See, Vice President of Refrigeration, has announced his retirement effective January 1, 2010. He joined F.W. Webb in 2000 with the acquisition of his company, N.W. Day. His career there spanned 40 years. He dedicated ten years building the refrigeration division for Webb. Thanks to his dedication, experience and Harry See industry relationships, he succeeded in Vice President making F.W.Webb the northeast leader Refrigeration in refrigeration in quick order. In his half century career, his name is now synonymous in the entire industry with excellence in refrigeration. Thank you Harry!
F.W. Webb's Syracuse New Location Opening! F.W. Webb’s Syracuse facility is moving! They will be opening their doors on January 25, 2010! With their new facility of 12,000 sq. ft. Open Concept Counter, 50,000 sq. ft. Warehouse Facility, 20,000 sq. ft. Indoor Pipe Storage Facility, 5,000 sq. ft. Fank Webb’s Bath Center, and our 50-seat Contractor Training Facility, you can expect more product, service, and training that F.W. Webb has to offer!
2
F.W. WEBB COMPANY
6792 Townline Road and VIP Parkway • Syracuse, NY 13204 www.fwwebb.com
F.W. Webb’s Newest Location: Newburgh, NY 600 Corporate Boulevard Newburgh, NY 12550 877.494.9322
GENERAL MANAGER
OPERATIONS MANAGER
NEWBURGH New York Located just one hour north of New York City, this location will serve the Orange County area.
Tim VanDenburgh
Ira Gray
Customers working with our Newburgh branch will find both specific products in stock and an experienced sales staff ready to provide any technical support required. No worries—if it is Industrial, Plumbing, Heating, HVAC or Refrigeration—we are the one stop shopping location that can meet your needs. Please consider joining the number of top local companies that utilize the powerful tools and resources that only F.W. Webb Company is able to provide and allow us an opportunity to meet and exceed your expectations!
Brian Doyle Outside Sales
Mike Fiduccia Inside Sales
Joe Alessi Outside Sales
Deb VanDenburgh Inside Sales
Don McAdams (left) and Bill Romer (right) Counter Sales
Marianne Riviere Showroom Manager
Mike Volk Outside Sales
Doreen Ibbetson Administrative
Carl Longobardo Driver
Nancy Forman Shipping
F.W. Webb New Employee
Kenan Youg Product Manager Refrigeration
Winter 2010
Upon Harry See’s retirement, we have decided to create the position of Refrigeration Product Manager. This is needed more today than ever. Product training, technical support, inventory help, sales help and knowledge of the HVAC/R markets, are all areas this position will focus on. We have hired Kenan Young to be that individual. Kenan has been in the refrigeration markets for over 20
years and most recently with Heatcraft Manufacturing. He has, with Heatcraft Manufacturing, been supporting our efforts from the manufacturing side, and helping many of you in the HVAC/R markets. Kenan will work under John Thomas, Vice President of HVAC/R. The HVAC/Refrigeration effort will now be combined into one HVAC/R division. Welcome Kenan!
F.W. WEBB COMPANY
3
Webb Has All Different Types of Pipe/Tubing 1/8” to 120” and Larger!
• Carbon • Stainless
• Aluminum • Copper
• Cast Iron • Brass
• Plastic • Fiberglass/Epoxy
Stainless Steel Pipe
Steel Pipe & Fabrication
304/L & 316/L Stainless, Schedules 5, 10, 40, 80
Wheatland • US Steel • Sharon Tube Charlotte • Cerro
• 1” – 36” • Flange, bell, roll groove and configurations • Stock sizes in 20’ lengths • Special lengths available
F.W. Webb Company has the largest pipe inventory in the Northeast. Our fabrication shop is capable of cutting, threading, and grooving through 12” pipe. When you call F.W. Webb, a professional inside sales force will handle your orders and questions. We can fabricate for immediate delivery and have 1/8” – 24” pipe in stock.
Continuous Production • 2”– 8” in schedules 5, 10, 20, and 40, Lengths up to 60’
Batch Production • 10”– 60” in schedules 5, 10, 20, 40, and 80, lengths up to 48’
All Sizes and Schedules 1/8” − 24” In Stock
Soil Pipe
Our Pipe Depot Stocks... Copper Tubing/Coils / Carbon Steel Pipe
CERRO Copper Tubing/Coils
Cast Iron Soil Pipe & Fittings
• Domestic A53 CW, ½” – 4” Sch n end, 1/8” – 4” in black T&C, ½” – 4” in Galvanized T&C ½” – 4” in Sch 80 in black plain end, 2½” – 4” in Sch 40 groove x groove • Domestic A53 ERW, 2½” – 30” Sch 40 & standard sizes • Domestic A53 ERW, 8” – 16” in light weight ranges • Domestic A53 ERW, 6” & 8” XH black plain end • Domestic A106 Seamless, ½” – 2” in Sch 40 & 80 • Imported A106 Seamless, ½” – 12” Sch 40 & 80
Stainless Steel • Domestic 2”– 12” Sch 10 304L – A312, 316L – A312, 304L – A778 (3”), 316L – A778 (3”, 10”, 12”) • Victaulic Sch 5 for Pressfit
Lengths & Coils Webb has inventory of over onehalf million lbs. of copper tubing from ¼” to 6” in diameter.
PVF • Plumbing • Sprinkler • HVAC • 100 customer service persons • 200 delivery trucks • Dedicated account manager • $90,000,000 inventory • Product application specialists • 24-7-365 • Hard to find products • Professional submittals • 65+ branches
• Job usage reports • WebbConnect, On-Line access (www.fwwebb.com) • Expediting • On time . . . Accurate . . . Complete Deliveries • More products & services less hassle • Project pricing
PVC/CPVC – HARVEL 4
F.W. WEBB COMPANY
www.fwwebb.com
Valves Made In The USA
ANSI class 150 flanged top entry ball valve
NOW!
Critical Service Valves • Sizes 1/2” to 10” • Temperature – 150°F to +1,000° F • ANSI Pressure Class 150, 300, 600 • Vacuum to 29” Hg • 16 seating materials, four different configurations • High-strength encapsulated metal seat holders Ideal for High Temperature, • Seven body materials High Vacuum and Intense • Nine ball and stem materials In-Line Repair Demand • Six end configurations 1/2” – 10” • Standard bonnets, extended bonnets and fugitive emission bonnets – all interchangeable • B16.34 Compliant
Apollo® flanged Ball valves
High Performance Flanged Valves 87A/88A Series
Apollo flanged ball valves are available in CF8M Stainless Steel, WCB Carbon Steel and CN7M A20 alloy.
Flange Rating
Standard Port
Full Port
Carbon Steel
150#, 300#
88A-100, 88A-700
88A-200, 88A-900
Stainless Steel
150#, 300#
87A-100, 87A-700
87A-200, 87A-900
150#
87A-400
87A-500
Alloy 20
87A, 88A Extended Bonnet Works Best In Insulated Applications
Winter 2010
on all “Made in the USA” products!
Apollo-press™ Choose the Cast Bronze Body Valve from Apollo® that Installs − Securely − in Seconds! Features: • Compatible with most crimping tool systems • 210°F maximum operating temperature • Press connections rating: 200 psig • Valve rating: 600 psig CWP • Cast bronze body • Adjustable stem packing • For water or air service • Blow-out proof stem • Full port design • Sizes ½” – 2”
77W
1/2” – 2”
Apollo Series 77W Apollo-Press ball valves feature end connections forged as an integral part of the valve body. You get a solid joint between pipe and valve in just seconds with no additional fittings, no solder, no flame. The 77W features a blowout-proof stem, chrome plated solid brass ball for optimal flow and an adjustable stem picking nut. Apollo-Press™ valves meet MSS SP-110 standards. They are UL-listed, FM certified and ANSI/NSF 61 approved. Apollo-Press valves are available now in sizes from ½” to 2”. Integral Crimp-Ready End Connections Offer Savings You Can Count On.
Apollo® Class 600 Ball Valves 83B Carbon Steel and 86B Stainless Steel
NEW 4” Extended Bonnet
Unique Apollo® 4” stationary bonnet extensions are your perfect choice for valves in insulated service. Better than a stem extension, this gasketed, pressure-containing bonnet bolts directly to the ISO 5211 mounting pad. Because the extension is stationary, the valve can operate as designed — without tearing away insulation. The packing is moved above the insulation for ease of maintenance. A four-point ISO 5211 mounting pad is also included as the standard locking feature. Available factory-installed or in kit form for retrofitting. • B16.34 Compliant
100% American Made
™
A351 CF8M – 87A Series A216 WCB – 88A Series 1/2” – 12” A351 CN7M – 87A-400 Series – 87A-500 Series Apollo flanged valves are available in 150# flanged and 300# flanged floating designs. Are also available in standard as well as full-port configurations.
Also available with trim options: • 316SS ball and stem • NiCu ball and stem • Hastelloy ball and stem
5-YEAR WARRANTY
3/8” – 2”
Fully rated in every size: 3/8”, ½”, ¾”,1”,1¼”, 1½”, and 2”. Also available in nickel and alloy bodies. Gland plate adjustable without removing actuator. • Three-piece full port enclosed stainless steel bolts • Swing-out center section • Pressure-balanced solid ball • Anti-blowout bottom entry stem design • Anti-static ground ball and stem • Lockable in open or closed position • Fully machined ISO 5211 mounting
• Cast bosses for bleed and drain ports • Vacuum service to 29 in of Hg • Meets NACE MR0175 (2000 edition) • Steam rated to 250 SWP • Adjustable multi piece “V” style packing • Unfilled FDA compliant, enhanced PTFE seats are standard • B16.34 Compliant
F.W. WEBB COMPANY
5
ITT Engineered Valves Delivering high quality, innovative flow control solutions for Abrasive Wear Resistance, Corrosion Resistance, and Critical/Hazardous Containment in a wide range of industries worldwide.
Fabri-Valve c67 popular option now standard! The mechanical retained seal option is now standard on all sizes of the Fabri-Valve C67’s ordered after October 1, 2009. This popular option features set screws that are drilled into the bottom portion of the flange. These screws press against the seal that is retained in the valve body by its trapezoidal shape. Since the feature is now standard, there is no additional cost for this popular feature. If you have any questions, please contact your F.W. Webb Sales Representative.
Cam-Tite® and Cam-Line® ball valves with H-Series Compact
actuators have been converted to C-Series Compact II actuators. The Compact II is one of the most rugged actuators on the world market. Due to its ruggedness, Compact offers a seven year warranty on the actuator.
Advantages of the C-Series Compact actuators: • Powerful - Four pistons generate twice the torque of comparably sized two piston designs • Energy saver - Reduces the average air consumption by 50% due to compact physical size • Fastest - Has faster stroke due to shorter travel distance • Smallest and Lightest - Size is about 50% of a traditional 2 piston actuator with same torque value, due to the 4 piston design • Minimal easy maintenance • Less wear of moving parts (piston and o-rings) than any traditional 2 piston actuator due to the concentric pistons design • Safe springs configuration change with cover bolts long enough to release spring load before removing the cover • Easy spring configuration changes, due to concentric spring structure • Wide options of Fail/Safe combinations, particularly in low air operating pressure The H-Series actuator has been discontinued and ITT will no longer ship or quote the obsolete H-Series actuator. If you have any questions, please contact your F.W. Webb Sales Representative.
6
F.W. WEBB COMPANY
www.fwwebb.com
Valves
Guaranteed to leak. And that’s a good thing. Only Viega ProPress fittings and valves offer the patented Smart Connect feature, a quick and easy way to identify connections that need pressing. During pressure testing, water flows past the sealing element indicating an unpressed fitting. Since 2005, Viega’s Smart Connect feature has assured hundreds of millions of leak-free connections for water and gas applications throughout the world. Discover the difference Viega quality makes on your next project. For more information contact us at For more information, please contact 1-800-976-9817. your local F.W. Webb sales representative.
Viega ProPress® with patented Smart Connect® feature
Smart Connect 6.875 x 4.5.bw.indd 1
9/9/09 10:26:59 AM
To avoid the AFTER WHAT – switch to Flexitallic. Gasket failures can lead to system downtime and serious environmental impact. As the industry leader, Flexitallic Spiral Wound Gaskets are consistently manufactured to exacting engineering standards. They’ll stand up to the toughest temperature and pressure conditions, they’re resistant to virtually all corrosive and toxic media, and you get the same high quality gasket on time, every time. Gasket specifications should be reviewed and updated every 2 years. Call F.W. Webb today for a gasket consultation to make sure you are specifying the most reliable gaskets.
Winter 2010
F.W. WEBB COMPANY
7
Valves Crane and F.W.Webb Company provide valves that have stood the test of time. Whether it’s Bronze Valves, Iron Valves, Cast Steel, or Butterfly Valves, you can rely on the most experienced team in the Northeast to make your valve selection easy.
Bronze Valves
Cast Steel Valves
Gate • Globe • Angle • Check
Gate • Globe • Check
• Class 125 – 300 • Flanged, Threaded, & Solder Ends • Screwed & Union Bonnet • MSS-SP-80 • Commercial & Industrial Grade • Rising & Non-Rising Stem • ASTM B61 or B62 Body • Stainless Steel, Bronze, or Teflon Disc • UL/ULC/FM listed valves
• Class 150 – 600 • Sizes 2” – 24” • Flanged and Butt-Weld Ends • Bolted Bonnet • Swing, Tilting Disc and Stop Check • NACE & Special Trims (i.e., 316 SS, Bronze, Monel) • API 600
¼” - 3”
Stainless steel valves
• Class 150 – 600 • Threaded, Socket-Weld, & Flanged Ends • Bolted & Screwed Bonnets 316 SS, 316L SS & Alloy 20 Material Standard • Special Materials (Hastelloy C, Monel, 304 SS, & more) • API 603, MSS-SP-42
Over 150 years of experience and reliability you can count on at every turn.
center line
FLOWSEAL
Resilient Seated Butterfly Valves
High Performance Butterfly Valves
• Rated to 200 & 285 PSI shut-off • Wafer and lug body style • Series 200 Cast or Ductile Iron • Series 225 – 285 PSI shut-off • Series 250 – Carbon or Stainless Steel • Series 300 – Direct Drive • Series 800 fully elastomerlined check • Automated valves: pneumatic, electric, hydraulic Center Line Valves are well-suited for low pressure applications, providing dependable service for air and water in snow making pipelines.These valves are easily replaced in the field.
• ASME Class 150, 300 and 600 • Wafer and Lug body style • Soft seated; zero leakage • Metal seated; ASME Class IV leakage • Fire safe; meets API 607, Rev. 4 • MSS-SP-68 • Automated valves: pneumatic, electric, hydraulic • Lug body valves suitable for dead-end service in either direction The patented Flowseal soft-seat design provides bubble-tight shutoff and provides unparalleled service in vacuum- to low-pressure ASME Pressure Classes 150, 300 and 600 applications.
2” - 48”
2” - 48”
2” - 24”
Duo-Chek® High Performance Check Valves • Class 125 – 2500 • Lug, wafer, double flanged, and extended body style • End connections: Raised face, Plain face, Ring joint, Weld end, Hub end, Flange connections • Resilient and metal seal materials • API-594 • Cast Iron, Ductile Iron, WCB Cast Steel, 316 SS, all alloys Provide superior backflow and water hammer protection for pumps in snowmaking systems. 2” - 72”
8
F.W. WEBB COMPANY
www.fwwebb.com
Valves
The most dependable Small check valve. The tightest shut off Check valve.
The most repeatable check Valve.
Why would you trust any other check valve to protect your system? The SCV should be your first and only choice. Low cracking pressure, conical spring, silent inline design, solves water hammer, provides superior reliability and longest service life. Boiler Feed, Condensate, Steam, Chemical, Cryogenic Fluids, Instrument lines, Pressure Power Pumps • 1/2” to 3” NPT and Socket weld • 316 SS Body and Disc • Soft Seats and Alloys available
Satisfy your Customers’ most demanding long-term steam & hot Water needs. Count on smiling customers everywhere from commercial laundries and dishwashers to manufacturers of commercial cooking equipment. The Series 8220 steam and hot water valve from ASCO is the hottest new thing in its class. Its high-flow design provides unequaled throughput, with up to 60 percent more flow. Its ultra-reliable construction endures the rigors of steam and hot water service up to four times longer than other valves. It even reduces inventory by eliminating the need for separate valves for steam and hot water service. Use the Series 8220 to satisfy nearly every steam and hot water application you’ve got! Please contact your local F.W. Webb representative for more information.
Contact your F.W. Webb representative for more information. Winter 2010
F.W. WEBB COMPANY
9
Hose Contact Peter Marshall, Gary Rose or Mike Costa: 800.795.6390
Peter Marshall
The F.W. Webb hose division has the capacity to make hydraulic hose assemblies to your specifications. Whether it is ¼” or 2”, 150psi to 6,000psi. We can meet your requirements with the highest quality and reliability with Gates Rubber Products.
F.W. Webb’s Hose Division can make custom hose assemblies specific to the customers’ needs.
mega 3000® and mega 4000™ A New Generation of Hydraulics Gates new generation of hydraulic hose and coupling products offer maximum flexibility and leak prevention on heavy-duty applications, regardless of pressure. called MegaSys®. Gates Mega 3000® (M3K) has a pressure rating of 3,000 psi in all sizes, thereby simplifying the selection process and inventory control. Mega 4000TM (MK) offers the same user benefits in a hose with a 4,000 psi rating in all sizes. Gates abrasion resistant MegaTuff® cover is now available on nine heavy-duty hydraulic hoses.The special hybrid cover material has been tested to last up to 300 times longer than standard rubber covered hoses.This feature increases service life, lowers maintenance, and eliminates the need for costly hose protectors such as guards, sleeves and bundling. The MegaSys line also includes MegaCrimpTM, a pre-assembled coupling that is versatile, leak resistant and easy to crimp. It is designed with a patented "C" insert, attached to the ferrule, that freely encases hoses of different constructions and wall thickness.This simplifies inventory requirements since one size of MegaCrimp can accommodate many different hose OD's, on both one- and two-wire hydraulic hoses.
Gates is an engineered system of hose and fittings designed to be used together for top performance, and a long, safe, service life.
$ave Money! Get 5% off your next rubber connector or rubber expansion joint order
• We are responsive to your tight lead times! • Guaranteed 24 hour response to your quote request • 2 week standard delivery
Please reference promo code win0110
CSA standard B-51 certified. Inspected and tested by the Technical Standards and Safety Authority of Canada.
Contact your F.W. Webb Sales Representative for more information.
10
F.W. WEBB COMPANY
www.fwwebb.com
Pipe Fittings/Webb Piping Solutions Gary Rose General Manager Piping Products
Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390
Handling corrosive materials in these challenging economic times can be difficult. Our factory trained staff here at Webb Piping Products have the product knowledge, and the capability to assist you in your most difficult applications. Crane Resistoflex and Crane Xomox are the trusted quality brands in the industry. There extensive product offering coupled with the team at Webb Piping Products are ready to assist you in offering the right products for your corrosive handling needs. Call us first for cost effective corrosion handling needs.
Innovative Process Solutions F.W. Webb Company uses only Resistoflex-lined pipe and fittings and is the only factory-authorized distributor in the Northeast. Our Conrac machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factory-trained personnel located at our Cranston, Rhode Island facility are here to serve you with their many years of experience and knowledge of lined piping systems. F.W. Webb is the exclusive, stocking distributor of Resistoflex. We have the inventory and personnel dedicated to serve you for all lined product requirements.
Piping Systems for: • Compressed air • Inert gases • Vacuum • OEM machines
• Industrial & commercial wash down equipment • Drain valves • Sampling valves • Line blind valves
• • • • • •
Plastic–lined products Butterfly valves Ball valves Check valves Strainers Relief valves
• Quality fluid & gas transfer • Pipe connectors in Stainless Steel and Carbon steel
• Double ferrule CBC lock fittings • Ball valves • Needle valves • Manifolds
• Industrial hose • Acid chemical, air & multipurpose, petroleum transfer, food & beverage, material handling • Water and steam hoses
CRANE RESISTOFLEX and CRANE XOMOX: you’re single source for youR most difficult corrosion applications
• Polypropylene, Teflon, Kynar, and PFA Lined products • Diaphragm valves • Check valves • Clamp valves • Hose • Expansion joints Winter 2010
• • • • • • • •
PFA Lined products Swing check valves Ball check valves Piston check valves Sight flow indicators Strainers Poppet check valves Clamp valves
F.W. Webb Company 3 Slater Road Cranston, RI 02920 Ph: 401.739.0180 Toll Free: 866.850.7867 Fax: 401.463.6056
F.W. WEBB COMPANY
11
Pipe Fittings/Webb Piping Solutions
Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390
Crane Resistoflex and Crane Xomox: You’re Single Source for Your Most Difficult Corrosion Applications.
xomox® tufline fully lined plug valves
• These valves are more versatile, and often out-perform alloy valves. • More economical than alloy valves. • With FEP and PFA lining, cast, dovetail recesses and machined grooves lock the lining to the valve body casting. The locked-in lining is virtually impervious to shrinking, stress-cracking, collapse, or blowout. • Unlike alloy valves, there is no need to inventory different valves for various applications. • There is less chance of costly and dangerous installation errors. • Media contamination is prevented. • Positive shutoff. • FEP and PFA locked-in lining. 2-way fully lined plug valves 3-way fully lined plug valves
Xomox® valves are lined with DuPont™ Teflon® fluoropolymer.
xomox® tufline fully lined Ball valves
• Tufline Lined Ball valves have a metal-tometal body joint to control compression of the liner for assured sealing. • The seats are easily and quickly replaced. Standard port lined ball valves
Full port lined ball valves
fully lined accessories
Tufline Fully Lined Accessories are a reliable and economical alternative to costly highalloy products. • Wafer Swing Check Valves • Ball Check Valves • Piston Check Valves • Sight Flow Indicators • Strainers • Tank Bottom Valves • Poppet Check Valves • Clamp Valves
xomox® tufline fully lined butterfly valves
• Lower torque ratings. • Continuous disc/shaft lining. • Triple O-ring stem sealing components are all isolated from corrosive flow media. • Spring washer live loaded stem packing. • Slim profile disc. • Completely enclosed shaft bottom. No springs, seals, or
washers to corrode or fail. • Face-to-face dimensions meet API 609 specifications. PFA lining: • More flexible and less bulky for more reliable and tighter sealing. • Excellent permeation resistance. • High Cv values.
The Cost–Effective Way to Fight Crane Resistoflex / Crane Xomox now give F.W. Webb the capability of offering the complete Crane package for corrosion–resistant plastic–lined pipe, fittings, and valves. The economical alternative that combines the mechanical strength of steel with the chemical resistance of an engineered plastic. Why live with the constant maintenance and replacement of inexpensive materials or the outrageous price for alloy piping?
12
xomox® tufline
F.W. WEBB COMPANY
Corrosion
F.W. Webb Company uses only Resistoflex–lined pipe and fittings and are the only factory– authorized distributor in the Northeast. Our Conrac Machine allows us to fabricate custom spool pieces for Resistoflex piping systems up to 8” diameter. Our factory–trained personnel located at our Cranston, RI facility are here to serve you with years of experience and are knowledgeable in lined piping systems. Webb is the only exclusive authorized stocking distributor with the inventor y and per sonnel dedicated to serve you for all lined product requirements.
www.fwwebb.com
Pipe Fittings/Webb Piping Solutions
Contact Gary Rose, Mike Costa or Peter Marshall: 800.795.6390
IN STOCK in CRANSTON and ALBANY!
Strahman offers a full line of mixing units, hose stations, hoses, nozzles and wash down accessories. Our wash down line is designed for industrial use and is used in a wide variety of industries including food, beverage, pharmaceutical, chemical and other applications.
M5000 Steam & Cold Water
M5000-TS
M159 Hot & Cold Water
Strahman Quality Hose Assemblies
M-Series Spray Nozzles
M5000 Steam & Cold Water Pedestal Series
Winter 2010
F.W. WEBB COMPANY
13
Fire Protection Contact Bob Schuler or Mac McNulty at 800.624.6647
Ames C200 and C200N Blackflow Double check valve assemblies
The Colt C200, C200N Double Check Valve Assemblies are used to prevent backflow of pollutants, that are objectionable but not toxic, from entering the potable water supply system. The Colt C200, C200N may be installed under continuous pressure service and may be subjected to backpressure. The Colt C200, C200N consists of two independently operating check valves, two shutoff valves, and four test cocks. For use in non-health hazard applications. Features: • Extremely Compact Design • 70% Lighter than Traditional Designs • 304 (Schedule 40) Stainless Steel Housing & Sleeve • Groove Fittings Allow Integral Pipeline Adjustment • Patented Tri-Link Check Provides Lowest Pressure Loss • Unmatched Ease of Serviceability • Available with Grooved Butterfly Valve Shutoffs • Available for Horizontal,Vertical or N Pattern Installations • Replaceable Check Disc Rubber
Mac McNulty
The F. W. Webb Fire Protection Division continues to add the latest innovative products in the market. Some of our recently added items shown on this page continue to lend themselves to faster and easier installation. The new 3M IC 15WB+ is easy to use, and is compatible with both plastic and steel systems! On-site manufacturer training is available. Watts recently released the model C400 RPZ with butterfly valves in a straight through design and is continuing to enhance the “Colt” backflow offering. Please feel free to ask us for any help we can offer with any of our products. Thank you for your continued support!
3m™ fire barrier sealant ic 15wb+
The Choice for contractors in need of a UL-listed product at a reasonable price.
3M™ Fire Barrier Sealant IC 15WB+ offers contractors an intumescent sealant that is UL-listed while helping to meet budget considerations. Designed for general purpose use, 3M™ Fire Barrier Sealant IC 15WB+ is UL-qualified and tested to ASTM E 814 for most common firestopping applications, including typical pipe and cable throughpenetrations in walls and floors. Plus, its yellow color allows it to be more easily identifiable to inspectors as being UL-tested when compared to the many red firestop materials on the market. Features: • Versatile for use in multiple firestopping applications • UL-listed systems for ratings up to 3 hours • Compatible with both steel and CPVC systems • Cost-effective • 250+ UL and Warnock Hersey listings • Easy to identify yellow color • Easy to apply
aquaflex stainless steel sprinkler fittings
The fastest, easiest flexible sprinkler drop system available.
dual-vac Dual Vac combines the benefits of a wet/dry vacuum and a submersible pump. When a wet/dry vacuum fills with liquid the user must stop and empty... a time wasting effort. With the Dual Vac, a Submersible pump and a series of floats will keep the canister empty. Features: • Ideal for changing all types of sprinkler heads. Water is removed from the sprig as the sprinkler head is removed. Water automatically pumps out of the canister through a garden hose connection. • Also lends itself to pumping antifreeze into pipe systems. A “must have” item for every service truck!
14
F.W. WEBB COMPANY
Experience the new AquaFlex one-piece, open-gate 1-Bee2 bracket system. This revolutionary, easy-to-use system offers: • Installation-ready 1-BEE2 one-piece bracket • Braided and unbraided hoses available from 31 – 72” • 24 and 48” width brackets • Short and long 90º elbows • One bracket design for pendent, semi-recessed and concealed sprinkler installation
www.fwwebb.com
Cranston, RI: 866-850-7867 Winslow, ME: 800-452-1928 Syracuse, NY: 866-850-7867
Pump Sales • Service • Repair
Jim Bodle General Manager
Webb Pump continues to grow by providing honest service, competitive prices, knowledgeable team members, and world-class products that are delivered on-time, every time. We work hard to satisfy the requirements of our customers each and every day and look forward to earning your business as well!
Webb Pump and Web Bio-Pharm Partner with Dover Pump Solutions Group! Webb Pump and Webb BioPharm are extremely pleased to announce our new partnership with the Dover Pump Solutions Group (PSG). Formed in 2007, the Dover PSG family of companies consists of six complementary industry-leading lines including Wilden, Blackmer, Mouvex, Neptune, Griswold, and Almatec. With the addition of these products, more now than ever our company is well-positioned to offer problem solving solutions for virtually any type of application. We will be stocking components and complete pumps for the full PSG lineup in our Cranston facility and look forward to supporting your requirements. Please contact Brian Clark in Cranston for more information!
Wilden is a global leader in the design and manufacture of Air Operated Double Diaphragm pumps. The Wilden name is synonymous with quality and is a well-respected brand that you can trust. With a complete range of body materials, diaphragm choices, and the latest in air-valve technology, you can rely on Wilden to have a pump to meet your needs!
Webb BioPharm Team Attends Blackmer Factory Training! Jim Bodle, Brian Clark, and Dave Buckless have all attended factory training at the Blackmer facility in Grand Rapids
Wilden Stock in-place at Cranston! Webb Pump has received our initial stock orders for Wilden Pumps and Parts in Cranston and is continuing to bulk up to meet our customers’ requirements. In keeping with Webb’s philosophy “We’ve Got It!” Our goal is to have product available for immediate delivery right from stock. If your company is a Wilden user and you’d like to see us stock items to support your needs, please contact Brian Clark in Cranston to discuss alternatives!
Michigan. In addition to covering the full Blackmer line of product, the training focused on the Mouvex eccentric-disc style pump as well as in-depth application discussions. The class experienced Blackmer’s world-class testing laboratory where they were able to put pumps through their paces with different liquids, a variety of viscosity ranges, and varying suction and discharge conditions.
They also witnessed
Blackmer’s manufacturing process which includes control of the process from primary casting through final assembly and testing. ‘Made in the USA’ remains important at Blackmer and their commitment to quality is evident throughout!
Meet Tom “Buzzy” Beagan Tom Beagan joined our team as an inside salesperson in February 2005. Tom comes from a “hands-on” background, having held a maintenance purchasing role for a company that reclaimed silicon wafers, as well as a having run maintenance department in a textile plant. He truly understands the time pressure that our customers face on a daily basis to keep things up and running and he also has the real
world experience to develop solutions for our customers. He has a positive “can do” attitude and is always ready to help. Tom and his wife live in Warwick, RI. He is the proud father of four children, Mallory-17, Andrew, 15, Billy, 6, and his youngest Francesca is now (unbelievably!) already 3! His hobbies include woodworking and cars; owning a new Ford GT would be a dream come true for him.
To get the most current information on Webb Pump’s products and staff, please visit:
www.webbpump.com Winter 2010
F.W. WEBB COMPANY
15
800.452.1928 207.873.7741
Process Control / Control Valves / Instrumentation & Accessories
Daryl Schoellkopf General Manager
Webb Kentrol/Sevco with the addition of Control Equipment of Cazenovia New York, offers a complete valve and actuation program to the entire F.W. Webb marketplace. From the simplest on-off electric of pneumatically actuated valve to the complex control valve package, our experienced staff delivers unparalleled value to our customer. Combining over 400 years of technical experience makes us your logical first choice for your automation solutions.
Digital Positioner
CAMFLEX®
Masoneilan’s SVI® II digital valve positioner provides high performance solutions for any process control application. SVI II offers advanced features and functions using the HART® Communications protocol. It is designed for use with any control valve system making it a truly universal control solution.
The Optimum Solution. . .In Control
Key Features
• Accuracy and precision • Non-contact position sensor • Modular construction
Key Customer Benefits
• High performance valve • positioning • • Scalable platform for hardware & firmware • upgrades • • Auto-calibrate and auto-tune • Non-contact hall effect • position sensor • Explosion proof LCD and • push buttons
Simple mounting for retro-fit Integral valve position transmitter and limit switches Basic and advance diagnostics Advanced diagnostics signatures stored in positioner ValVue® 2 companion software ValVue/AMS SNAP-ON™ application
Masoneilan Operations, a leading provider of automated process control solutions, offers the Camflex®. As the original eccentric plug rotary valve, the Camflex combines top performance and features within an extremely economical design. The Camflex was designed as an optimized control “system” that offers enormous versatility and broadness of application, yet provides ideal standardization for manufacturing. It is the most widely used eccentric plug control valve in the world, satisfying a variety of control applications and acquiring a long history of successful experience. The Camflex was the first to demonstrate how top performance and features could be packaged in an economical and efficient rotary control valve architecture offering: • Low life-cycle costs • Cost effective design • Enclosed linkages • Modular “system” configuration • Stellited trim • Environmental packing • High integrity splined shaft connection • Broad size range from 1” through 16”
Ceramic Ball Valves Due to the advanced properties of the technical ceramics used, Fujikin Ceramic Ball Valves offer significant advantages over standard material ball valves. Fujikin valves guarantee a valve that is superior in all respects, including resistance to: • Corrosion. 99.5% alumina ceramic is virtually inert to almost all organic and inorganic chemicals. They do not interact with, nor contaminate the process media. They are physically and chemically stable against most acids and alkalis, and offer years of service with little or no corrosive degradation. • Abrasion. 99.5% alumina ceramic is 43% harder than zirconia, 140% harder than porcelain, and 730% harder than stainless steel, an indication of the long-term wear-resistance properties of our valve materials. • Cavitation. Even severe, continuous cavitation will not degrade or damage our ceramic valve components. Therefore, the Cosmix Ball Valve may be used in cavitating or high differentialpressure applications with little or no harmful effects. • Wide selection of trims. 2-year warranty against corrosion, abrasion, and/or faulty workmanship.
800.452.1928
Call Scott, Chad, Parrish, Nate, Dan, Cynthia, Anisa or Bob with your questions.
Scott Varney Chad Collier Parrish Lovell Nate Grady Dan Desilits Cynthia Berkovsky sva@fwwebb.com chc@fwwebb.com par@fwwebb.com nate@fwwebb.com ddd@fwwebb.com ceb@fwwebb.com
16
F.W. WEBB COMPANY
Anisa Meigs Bob Richard ani@fwwebb.com bob.richard@ fwwebb.com
www.fwwebb.com
800.452.1928
Specialists in Automated Valves, Process Controls, Overpressure Protection, and Engineered Systems.
Instrumentation Services • Installation and Calibration • PID Loop Tuning • Troubleshooting • System Start-up Support • Commissioning Support • Full Shut-down/Outage Assistance
Control Panel Design and Fabrication
• CAD Design • UL Certification • NEMA 12/4/4x & Class 1, Div.1 • Custom Stainless Steel Fabrication • PLC Cabinets • Solenoid Cabinets • Complete Control Rooms • Sampling Systems • Damper Drives • Custom Consoles
207.873.7741
Fairchild Industrial Controls Pneumatic Pressure Regulators Fairchild manufactures a complete line of precision pneumatic regulators including positive pressure, back pressure, and vacuum models. Quality engineering and manufacturing excellence assure that our pressure regulators meet all the requirements of a precision device including: • Pressure accuracy • Sensitivity • Supply pressure immunity
• Drift-free settings • Low output droop
Electro-pneumatic Transducers The electro-pneumatic transducer was developed as a smaller, lighter, and more cost effective alternative to the M/P.An electro-pneumatic I/P, E/P, D/P, and P/I transducer receives an analog or digital input control signal and converts it to a regulated pneumatic output that is directly or inversely related to the input.
Pneumatic Volume Boosters A pneumatic air volume booster reproduces a low flow control signal with a greater flow regulated output pressure. It uses an unregulated input pressure to maintain a regulated output pressure under flowing and nonflowing conditions.
Valve Services • Valve Calibration • Valve Repair and Rebuilding • Valve Diagnostic Surveys • Valve Optimization Software • Predictive Maintenance Software
Engineered Systems • CAD Designed Skid Mounted Process Systems • Metering Systems • Filtration Systems • Temperature Control Skids/Modules • Utility Boiler Burner Valve Racks • Instrument Racks • Pump Skids
Precision™ Gauge Valves • Color coded dust caps for identification • Non-rotating tip • Oxygen service • Integral hard & soft seats • Anti-blow-out shaft • Bubble tight back-seal • 6,000 & 10,000 PSI valves • PTFE and Graphite seals • Pressure adjusted shaft seals • Comprehensive mounting brackets • Bubble tight seal on gas applications • 100% full pressure test of each unit
Venting Gauge Valve, VGV Multiport Gauge Valve, MPGV
P5/T
P3/T
DOWNLOAD our latest LINE CARD / OVERVIEW at: www.kentrol.com or sevco.fwwebb.com
Winter 2010
F.W. WEBB COMPANY
17
Webb Kentrol/Sevco with the addition of Control
800.452.1928 Equipment of Cazenovia New York, offers a complete Safety Relief Valves 207.873.7741 valve and actuation program to the entire F.W. Webb
Sevco Certified Pressure Relief Valve Service
Daryl Schoellkopf General Manager
Enardo is pleased to announce that Kentrol / Sevco a Division of F.W. Webb Co. has joined the Enardo sales team as our exclusive representative in the New England states consisting of Massachusetts, Rhode Island, Connecticut, Maine, Vermont and New Hampshire. Kentrol / Sevco comes to Enardo with over 40 years experience as Specialists in Automated Valves, Process Controls, Overpressure Protection and Engineered Systems. In addition to the quality product lines that they represent they are a fully certified ASME valve repair facility. As a pioneer in Vapor Conservation and Flame Arrestor equipment for more than 70 years Enardo has supplied industry with the products, services and solutions that meet the challenges of environmental and safety standards. We look forward to partnering with them to servicing and meeting the needs of the customers in their territory.
marketplace. From the simplest on-off electric of pneumatically actuated valve to the complex control valve package, our experienced staff delivers unparalleled value to our customer. Combining over 400 years of technical experience makes us your logical first choice for your automation solutions.
Model 950 Vent to Atmosphere Breather Vent
Series 7 Deflagration Flame Arrestor Model 850 Pipe Away Breather Vent
Model 1000 Lock Down Hatch
Detonation Flame Arrestor
Model 2000 Emergency Pressure Relief Vent
Free Vent Flame Arrestor
Call Cord or Gary with your questions. After–hours Emergency Service: 207.872.4779 sevco.fwwebb.com
18
F.W. WEBB COMPANY
Gary Thibodeau ggt@fwwebb.com
Cord Collier col@fwwebb.com
www.fwwebb.com
Utilities Supply Company 98 Lindbergh Ave. Methuen, MA 01844 Contact Dave McGlynn or Ian Power at 800.343.7555 John Romano Vice President, USCO
Today’s thermoplastic piping systems, offer features and benefits that can help to overcome the challenges of escalating construction costs and minimize harmful impact to our environment. These thermoplastic piping systems are lighter in weight, resistant to corrosion, have smoother interior surfaces than metals, and require less energy in total from manufacture to installation; all of this makes plastic piping systems a wise choice for your
next application!
A Cost-Effective Solution for Photobioreactors and Other Green Energy Applications Harvel® EnviroKing®UV has been developed as a clear UV resistant PVC piping that is suitable for exposure to sunlight. Unique UV blocking technology reduces harmful ultraviolet light wavelengths from penetrating the plastic while allowing beneficial wavelengths through.
As a result of extensive research, Ternion Bio Industries has selected EnviroKing™, a unique UV resistant clear PVC piping by Harvel® Plastics, Inc., as a key component in the manufacturer of its distinct, patent-pending photobioreactor system.
These unique attributes provide a durable containment vessel that has been optimized to improve light transmission through the pipe without jeopardizing product integrity. This enables Harvel® EnviroKing®UV to provide a cost-effective solution for photobioreactor tubing used in the renewable energy industry and other outdoor applications.
“EnviroKing UV ThinWall 4-inch pipe provided an additional 11% better growth environment than any other pipe we tested,” says Chris Schuring, Ternion Bio’s chief operations officer. “In the ability to be used as a scalable product, we feel it has no issue that would make the product unavailable for scaled systems. EnviroKing is the standard by which we will measure all others, and we look to use this pipe in all of our scaled Photo BioReactors.” A comprehensive case study about the development of Ternion’s photobioreactor system is available at EnviroKingUV.com.
Features include: • • • • • • • • •
Manufactured to both ThinWall™ and standard Schedule 40 dimensions Joined utilizing simple solvent-welded joining techniques Manufactured to IPS dimensions—Fully compatible with standard PVC pipe, fittings, and valves Corrosion resistant Non-conductive Lightweight, easy to handle and install Lower overall installed cost than glass, acrylic, or other transparent alternatives
Ternion Bio’s advanced photobioreactor technology captures carbon dioxide emissions and processes them to serve as the catalyst for the growth of algae, which then becomes the raw material for a wide range of beneficial products.
Multi-Voltage Actuator with Fail-Safe and 4-20mA Digital Positioner Options The EBVA features a rugged weatherproof and anticorrosive polyamide housing and more features than the original EBV. Standard Features: • Multi-voltage with auto-voltage sensing • 12-24V AC or DC • 85-240V AC or DC LED status light to indicate operational status of actuator • Electronic over-torque protection against valve jam • Thermostatic anti-condensation heater • Manual override for emergency hand operation • Remote position indicator • IP65 weatherproof anti-corrosive and UV protected polyamide housing • Local visual position indicator • Easy mounting with double-D drive • All external electrical connections via DIN plugs • CE marked • ISO 9000 manufacturer • Fail-safe and 4-20mA digital positioner options • Thermally protected motor
Winter 2010
F.W. WEBB COMPANY
19
Utilities Supply Company 98 Lindbergh Ave., Methuen, MA 01844
Specialists in Thermoplastic Piping Systems
Contact Dave McGlynn or Ian Power at 800.343.7555
+GF+ PE100 Industrial Polyethylene Piping System Applications: • Chilled Water Feeds secondary cooling applications (Heat exchangers, cooling towers) • Process Cooling Water (PCW) Feeds cooling water directly to a working tool or process • Bulk / Reuse Water Transfers large quantities of water from one process to a new process (Reclaim of process fluids, transfer between settling steps, transition from city water to processed water) • Industrial Water Treatment Industries: • Food Processing • Chemical Manufacturing • Power Generation • Semiconductor • MRI and X-Ray Centers • Plating Shops • Industrial Water Treatment • Pharmaceutical Manufacturing • Pulp and Paper Manufacturing • Solar
How GF Piping Systems Supports the Industrial Process Water Market
Due to its robust mechanical strength, high impact resistance including very low temperatures) and excellent chemical resistance, GF PE100 Industrial Polyethylene is the best all around product for your industrial process application. Whether it’s process cooling water, industrial water treatment, bulk water distribution or chemical processing, GF PE100 will meet the challenges of your critical applications.
Raw Material • GF PE100 Polyethylene
(2” – 36”) SDR11 (14” – 36”) SDR17 • Fittings (2“ – 12“) Molded (14“ – 36“) Fabricated • Valves Compact Lateral (Tee) Valves Full line of GF Valve Products
Competitive Advantages
• Ease of installation • Good chemical resistance • High impact resistance at very low temperatures • Good abrasion resistance
• Low weight • Excellent cost/performance ratio • Safely and securely joined by heat fusion • Fully integrated system from ½” through 36”
Fusion Technology • Infrared Butt Fusion 2 ” through 8” Polyethylene • Contact Butt Fusion 2 ” through 36” Polyethylene • Electro-Fusion 2 ” through 26”
20
F.W. WEBB COMPANY
www.fwwebb.com
Specialists in BioProcessing Components 877.932.2246 • 401.463.4176 • FAX: 401.463.4160 Contact Jim Bodle • www.webbbiopharm.com
Meet Webb Bio-Pharm’s Inside Sales Team
Mark Lowder
Christine McVey
Matt Hancur
Mark Lowder has been with Webb Bio-Pharm for 9 years. He is responsible for shipping and receiving, all invoicing and any AP/AR issues that may come up. He also lends a hand in inside sales when we are really busy. Mark plays an important and unique role for Webb Bio-Pharm. When Mark is not working he can always be found playing golf!
Christine McVey has been with Webb Bio-Pharm almost 8 years. Christine has many years of experience in sales and knows what our customers expect as far as service. She handles a lot of our day-to-day project bids and is very detail-oriented. She takes a task head on and will finish it successfully. Christine always enjoys taking a walk outdoors or spending time with her family.
Jim Bodle General Manager
Did you know that we stock a wide range of sanitary pressure gauges? All gauges are either ¾” or 1 ½” sanitary tri clamp connection, all PSI ranges and can either be supplied with a dry case or we can fill the case for you. Please contact us today for your pressure gauge requirements!
ALMATEC – The Biocor Series The BIOCOR series ALMATEC pump is especially designed for sterile applications within the biopharmaceutical and related hygienic industries. The air-operated diaphragm pumps are EHEDG certified for cleanability as well as ATEX certified to conform to 94/9/EG directive for classified areas. BIOCOR pumps are fitted with PTFE (diaphragms, ball valves, O-rings) and equipped with a diaphragm monitoring system are 3-A approved. This hygienic design enables the CIP (clean in place) and SIP (sterilization in place) capability. Important for sterile applications, all fluid paths of the BIOCOR pumps have no horizontal surfaces. Each pump comes with four ball lifting magnets that can be attached to the pump housing from the outside at the location of the four ball valves. The magnets lift the ball valves out of their seats causing the pump to drain entirely without having to be dismantled. There are no mechanical ball lifters with parts and seals in the wetted area. The three pump sizes available are the B 20 (1”) , B 32 (1.5”), B40 (2”) and achieve max. capacities of 3.5, 7.5, 14m³/h (15, 33, 62 gph) respectively. Maximum discharge pressure is 7 bar (100psig). The material for the wetted housing parts is electro polished SS 316 L (1.4435, according to Basel Standard II, ferrite content < 1%) with a surface roughness of < 0.4 µm (<15 RA u-inch). The center block is made of conductive polyethylene. Full documentation is available for validation purposes including mill and class VI certificate for PTFE .
Matt Hancur has been with Webb Bio-Pharm just over 7 years. It didn’t take Matt long to become very knowledgeable in our core product lines. Matt has learned quickly and continues to do so. He has taken our pump program head on and has brought it to the next level. Customers contact Matt for day-to-day pump inquiries. Matt just become a Dad recently and enjoys spending time with his new family. He also finds time to sneak in a round of golf !
Please call us today and experience the superior customer service that we have to offer!
Winter 2010
F.W. WEBB COMPANY
21
HVAC/R & Controls 800.253.7838 • 781.933.1804 • Fax: 781.933.3528
Exceeding the demands of a changing industry is not always easy. With escalating energy costs, demands for higher efficiency and renewable energy systems; change becomes daily. Webb continues to meet the challenges with systems utilizing R410A refrigerants, advance coil technology with the York Micro Channel, along with Variable refrigerant John Thomas systems by Daikin. Call Webb today and take advantage Vice President HVAC/R & Controls of industry leading products and systems.
direct coupled electric linear valve actuators
T600 Series Digital thermostat The thermostat replaces many competitive brands. The T600 digital programmable and non-programmable thermostats provide advanced temperature control and easy-to-follow menudriven programming. All setup and programming is done at the push of a button by following plain text menus. The T600 is available in a 7-day, 2/4 event programmable model or a non-programmable model. Each one offers at least 20 configurable parameters. They can control single-stage multi-state, and heat pump units. Plus, the programmable model controls unitary rooftop equipment with economizers.
ML6421/7421 Non-Spring Return ML6425/7425 Spring Return Suitable for use with on-off controllers/ SPDT floating controllers or electronic modulating systems.
remote temperature controllers
T775 Series
Offers the flexibility of up to four stages ON/OFF, modulating or reset control with digital display and wide set point range.
Variable Air volume modular assembly
VMA1400 is a configurable digital controller with a pressure sensor and an actuator, housed in a pre-wired unit. Continuous loop tuning through algorithms, automated commissioning, position feedback for enhanced damper position accuracy, advanced diagnostics, N2 network communication and Palm Pilot interface.
single/dual transmitter input receiver control
RKS1001
two position actuator MA-5200 MA-5300 Series Series
VSD Series • World’s smallest footprint • Standard copy/paste keypad (for copying parameters to other drives) • External Fan is removable with no screws (Frames 4 & 5) & Fan can be temperature controlled • EMI/RFI filters & 3 % Line Reactors Standard Local / Remote button on keypad (1 – touch)
Retrostat kit Converts existing pneumatic room thermostats to Powers 192 Series. Competitor retrostat kits have factory calibrated changeover pressure to match the manufacturer they replace.
powermite 599 series MZ Series: . Close-off up to 25 psi . Electronic actuators only 0 to 10V fail-in place 24 Vac, 2-position, 3-position control . Low leakage rate (ANSI Class IV)
Please contact your F.W. Webb Sales Representative for more information!
22
F.W. WEBB COMPANY
www.fwwebb.com
HVAC/R & Controls
800.253.7838 • 781.933.1804 • Fax: 781.933.3528
energy saving commercial equipment
Millennium Split System 2 and 4 Pipe Condensers 15 to 50 Ton
All models include the Simplicity controls system, engineered for ease of set up and programming, to provide alarm monitoring. Free local networking carries all alarm and diagnostic data directly to an on-site PC. When available,York Wireless data can be transmitted virtually anywhere. These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of refrigerant-22 for storage and/or shipping. The compact design, clean styling, low silhouette, and quiet operation make these condensing units suitable for almost any outdoor location. • Meets or exceeds Ashrae 90.1-1999 standards • Simplicity Controls • Inherently protect condenser fan motors • V-Coil Design with exterior service port connections • Five-minute anti-short cycle timer and minimum compressor run time • Standard operation to 40 F. Field-installed Low Ambient VFD Control to 0ºF • Factory installed disconnect and Technicoat coils option • Scroll compressors provide both high efficiency and reliability • Condenser coils are constructed of copper tubes and aluminum fins for durability and long lasting efficient operation • Crankcase heaters that will be de-energized when the compressor is operating • Self contained high and low pressure controls • Solid state or internal line break compressor motor protection • Class 2, 24-volt thermostat control circuit
Large Commercial Rooftops (Y) 25, 30 and 40 Ton
York Millennium® Rooftops offer the flexibility to meet the requirements of a wide range of installations.They’re built to last and priced to compete. Numerous options can be added to the base unit to satisfy almost any specifications —from the simple to complex. Units are offered in the following combinations: • Cooling Only • Cooling/Gas Heating (Natural Gas or Propane) • Cooling/Electric Heat • Cooling/Hot Water Heat • Cooling/Steam Heat In addition, these units are designed with the flexibility to support the industry’s best practices for indoor air quality.All these features are available on 25, 30- and 40-ton single-package units that are easy to install, use, and maintain. Factory-installed options, such as economizers, power exhaust, high-efficiency motors or filtration, barometric damper relief, 0° low ambient, high-capacity evaporator coils, and single-unit disconnect, add to the versatility of these selfcontained rooftops. • Double-wall construction with galvanized sheet metal liner to protect against microbial growth. • Rigid sheet metal inner liner to keep insulation out of the airstream. • Sloped drain pan protects against pan corrosion and bacterial growth. • Pitched roof design for natural drainage. • Scroll compressors for efficiency and durability. Multiple refrigeration circuits for greater turndown and the best unloading capabilities in the industry. connection for BAS compatibility. • Extended flue connection on gas units to eliminate the possibility of corrosion in the furnace heat exchanger. • Constant air volume or Variable air volume by inlet guide vanes or variable frequency drive. • Full range of airflows and static pressures to meet most every application requirement.
F.W. Webb is the exclusive distributor of York Heating and Cooling Systems and Source 1 Parts for New England and Upper New York.
variable refrigerant volume (VRV) system
Optimized R410A Design
❶
❷ This industry benchmark is the world’s first R410A-operated ❸ variable refrigerant volume ❹ (VRV) system and represents a considerable advance in efficiency ❺ over competitive systems. ❶ Aero Fitting Grille and Aero Spiral Fan ❷ DC Fab Motor Optimized R410A design: ❸ Sine Wave DC Converter Daiken sets the industry standard ❹ E-Pass Heat Exchanger ❺ Reluctance Brushless DC Compressor The motor comprises powerful neodymium magnets that generate the reluctance torque. These magnets are approximately 12 times stronger than ferrite magnets and contribute to its substantial energy-saving performance.
➊ ➋ ➌ ➍ ➎
Winter 2010
F.W. WEBB TO DISTRIBUTE ACADIA HEATING AND COOLING SYSTEM Energy-minded homeowners and businesses in the Northeast now have easier access to the Acadia Combined Heating and Cooling System from Hallowell International with the new distribution partnership with F.W. Webb Company. The Acadia is a revolutionary new green technology for heating and cooling a home, while at the same time helping consumers and businesses save money. Acadia outperforms conventional fossilfuel-based heating systems such as oil-powered furnaces, the most common system in the Northeast, by up to 300%. F.W. Webb has long been a partner with Hallowell International in the development of the Acadia, providing components to manufacture the system. The enriched partnership provides Hallowell with an expanded distribution network with increased training facilities and customer support through the 70+ F.W. Webb facilities across New England and Upstate New York. The Acadia is a single system engineered to comfortably heat and cool homes no matter what the weather outside, and it is both economical and environmentally friendly. The engineers at Hallowell International created the Acadia using revolutionary boosted compression technology, enabling this clean technology to run effectively and efficiently in temperatures as low as -30°F.
F.W. WEBB COMPANY
23
HVAC/R & Controls
800.253.7838 • 781.933.1804 • Fax: 781.933.3528
YORK AUTHORIZED FACTORY PARTS
24
F.W. WEBB COMPANY
www.fwwebb.com
After spending the last five years at Heatcraft Worldwide Refrigeration, I look forward to using that experience to grow the refrigeration division at F.W. Webb.
Refrigeration 781.272.6600 • fax: 781.275.3354 Contact Kenan Young
Standard chiller builder kit If you need an easy–to–assemble, low side package that utilizes the smallest, most powerful, and most efficient chiller on the market, Standard Refrigeration’s Chiller Builder Kit is what you’re looking for. • Uses super compact TX chiller barrel • Brand name components • Single or dual circuit options • Available in ranges from two to 30 tons • Entire kit can be assembled in less than one hour • NEW three and four circuit models! • Ideal for achieving up to 20 tons with single phase compressors. • Chiller Barrel is now included.
Thermostatic expansion valves Features & Benefits: • Selective thermostatic charges • Thermostatic element design • Diaphragm design • Replaceable thermostatic elements • Balanced port design • Pin carrier design (conventional valves) • Accessible internal parts • Materials of construction • Silver soldered connections • Adjustable superheat design
Air, Water, & Remote Cooled Modular Contour Cubers - CME506
Value the Difference of CM3 Ice Machines • CM3 Series offers the lowest lifetime operating costs based on lower water and electrical usage. • AutoIQ™ Control System monitors and controls the ice machines’ functions to ensure consistent ice production and reduce operating costs. • CM3 Evaporator is a hot tin dipped, molecularly bonded plate that has been field tested and proven 99.4% reliable over 5 years. • Rust-free Polyethylene Base and Food Zone is insulated with 1½” of foam which keeps water and food zone cool to reduce operating costs and is backed by a Lifetime Rust-free Warranty. • Contemporary styling and stainless steel finish make the CM3 a perfect addition to any operation.
Winter 2010
Kenan Youg Product Manager Refrigeration
harford walk-in box There’s a lot to take into account when selecting walk-in coolers and freezers. One size doesn’t fit all – you need the right dimensions, details and accessories to find a walk-in that will be right for your operation. A Harford walk-in is created to suit your exact needs. To make that possible, we start with sectional panels that can be configured to create exactly the walk-in you require, in virtually any shape or dimensions. Those panels are fabricated with durable skins – you’ll choose the variety of metal that’s best for you – sandwiched around a four-inch thickness of super-insulating poured-foam urethane. The panels are supported by a durable floor of the same basic construction, and complemented by exactly the accessories you need. When it’s finished, you’ll have a walk-in that’s truly tailored to your needs. Expect economy, long life and a favorable repair record. Above all, expect a walk-in that’s a smooth-functioning part of your kitchen for years to come.
chandler / heatcraft Evaporators
Features: • Patented Floating Tube condenser construction • Suction and discharge vibration eliminators with spring mounted Discus compressors • Fixed high and adjustable low pressure switches • Sentronic oil failure switch with Discus compressors • Discharge line check valve with high and low temperature scroll compressors • Discharge line thermostat with high temperature scroll compressors • Liquid injection solenoid valve and capillary tube with low temperature scroll compressors • Manual pump-down switch
tecumseh condensing units
F.W. WEBB COMPANY
25
Institutional / Property Management 781.272.6600 • fax: 781.275.3354 Contact Dean Plouffe
SLOAN SOLIS® Heu/het FLUShometer • Sloan Valve Company introduces the world’s first solar-powered, sensoroperated Flushometers. Sloan SOLIS® Flushometers for water closets and urinals provide ground-breaking water efficiency and utilize state-of-the-art photovoltaic technology. • Sloan SOLIS® Flushometers use light to charge a highly efficient capacitor, providing power even in rooms with occupancy-controlled lighting. The solar panel powers the unit without the need for moving parts in the waterway. No moving parts in the waterway mean superior hydraulic performance and reduced maintenance. • Toilets account for most of the water used in commercial restrooms. The new SOLIS® High-Efficiency Flushometers are available in single-flush and dual-flush models. The dual-flush model has two flush cycles: Users can choose the full 1.6 gpf/6.0 Lpf flush for solid waste or the reduced flush of 1.1 gpf/4.2 Lpf for liquid waste.
Dean Plouffe Product Manager Industrial Plumbing
Water and energy conservation continue to drive innovation in the development of new products in the plumbing and heating industry. Municipal buildings, hospitals and schools are welcoming “green” products that are consistent with their goals of sustainability.
Sloan Solis® solar-powered faucet – EAF-275
Sloan Valve Company’s new SOLIS® EAF-275 faucet incorporates the latest advancements in solar-powered technology and leading-edge electronics for energy and water savings. Works with ambient light, like a solar-powered calculator. The SOLIS® faucet with its integrated Power Plant storage cell, transforms light from any source into electrical energy. • 0.5 gpm aerator regulates water flow . Electronic sensor automatically turns water on/off . Integral temperature control The SOLIS® EAF-275 is a reflection of Sloan’s commitment to designing and providing energy and water-saving systems. The SOLIS® EAF-275 is the natural choice for projects that call for a “green” faucet, European styling and the benefits of convenient touch-free electronics.
Manual Wall Mount
sensor-operated Wall Mount
The SJS-1400 manual hand sanitizer dispenser uses a bagtype refill that simplifies replacement and reduces waste.
The SJS-1450 sensor-operated, spray hand sanitizer dispenser uses a cartridge-type refill that simplifies replacement and reduces waste.
hand sanitizer dispenser – SJS1400
This manual dispenser delivers a pre-measured amount of liquid sanitizer per application – giving approximately 1000 uses per refill.The sight glass indicates low sanitizer level. • Pre-measured sanitizer per use • Push-style dispensing mechanism • Easy-to-replace refills, no contamination • Attaches to any wall in minutes
26
F.W. WEBB COMPANY
hand sanitizer dispenser – SJS1450
Its battery-driven sensor technology delivers a pre-measured, widepattern of mist, covering your hands. • Automatically delivers premeasured sanitizer per use • Sensor activates sanitizer dispensing • Hand-free operation promotes hygiene • Attaches to any wall in minutes • Replaceable batteries (4 AA batteries) • Batteries not included • Optional AC adapter • See through cover allows easy check of sanitizer levels • Choice of two delivery settings (one, or two-in-a-row) • Convenient bottom tray keeps area clean
www.fwwebb.com
Industrial Specialties Skinner repair clamps, service saddles, saddle tees, and drilling CALL: 800-828-0557 FAX: 603-218-2171 EMAIL: CDSALES@FWWEBB.COM Pipe Joint Clamp – stops leaks at joints, where pipe and fitting join
Model PS Wide
Model PL
Pipe Line Clamp – for long Pressed Steel Economy splits or extensive corrosion Clamp Wide – repairs badly pitted and corroded pipe lines
Model PS Narrow Pressed Steel Economy Clamp Narrow – repairs badly pitted and corroded pipe lines
Model SS
Model ST
Model EM Service Saddle – for making gas, oil and water Emergency service connections Pipe Clamps – repairs pit holes, splits and corrosion leaks
Model BCEC
Saddle Tee – for making gas and water connections
Band Clamp – for small pinhole leaks
green made easy. The ecobee Smart Thermostat
the smart choice for the smart contractor. The internet enabled ecobee Smart Thermostat is reliable, efficient to install and delivers superior customer satisfaction
Please contact your F.W. Webb sales representative for more information.
Winter 2010
• 7 day programming schedule • Manage and update thermostats online • Set service dates and reminders • Input business information and logo • Supports multi-stage/ hybrid systems • Humidity monitoring control • Auto change over
F.W. WEBB COMPANY
27
Industrial Specialties
Often Copied, Never Equaled… What makes the Spirax Sarco 25-Series regulators such hot sellers year after year? At the top would be its versatility. This family of self-acting pressure and temperature regulators with control pilots offers interchangeable main valves for most steam applications. Options for pressure regulation include pressure reduction (25P), combined pressure reduction with electrical on/off override (25PE), and as a backpressure regulator (25BP). Colorcoded, interchangeable springs allow quick and easy change of downstream pressure range, eliminating the need to isolate the valve or break the steam line. Options for temperature regulation include temperature control (25T) as well as combined temperature control with electrical on/off override (25TE). Seven pre-calibrated temperature ranges are interchangeable throughout the range. The 25-Series is available in sizes 1/2” to 6” with screwed and flanged connections. Designed for lasting durability and precision, the 25-Series main valve is single-seated with hardened stainless steel trim. It is covered by an extended 2-year warranty.
For more information, please contact your local F.W. Webb Sales Representative
Employee Profile Cathleen Barry General Manager Queensbury, NY
forged steel fittings Phoenix *Capitol domestically manufacturers a full line of forged steel fittings and unions along with branch connections marketed under Trans-O-Con. All Phoenix *Capitol products are produced to the latest ASME, ANSI and ASTM specifications and adhere to existing Approved Manufacturing Lists.
Cathleen Barry has been promoted to General Manager of the Queensbury, NY branch. Cathleen started with the F.W. Webb Albany Branch in 1991 as an Industrial Inside Sales person. She took the position of Operations Manager in Queensbury in 2004. Prior to working at F.W. Webb, Cathleen worked at another supply house for 2 years, and at GE Plastics and Silicones in the purchasing department. Cathleen’s 25 years experience in the industry will benefit the Queensbury branch and F.W. Webb as a whole!
28
F.W. WEBB COMPANY
www.fwwebb.com
Tools seesnake® drain & sewer inspection equipment
SeeSnake® reels and cameras
eXpands service capabilities
Owning a RIDGID® SeeSnake system expands your service capabilities and gives you the confidence and credibility you need to win more work. In fact, more than 95% of SeeSnake System owners report increasing their sales and profits after purchasing a RIDGID SeeSnake system. The entire RIDGID SeeSnake line of pipe inspection equipment is built to endure the toughest residential, commercial and industrial environments. In the rare case that your system needs service, our nationwide network of SeeSnake certified service centers get you back up and running quickly.
monitors and recorders
RIDGID SeeSnake monitors are available in various styles to meet your needs and are designed to be rugged, portable, and durable. A new line of monitors use the RIDGID 18V Lithium Ion battery so that you can take your SeeSnake monitor to work in places it has never been before. Additionally, the new line of monitors includes a line trace peg to enable you to easily locate the entire push cable with a locator and transmitter.
recording accessories
RIDGID SeeSnake modular recording capability allows you to add the latest recording capabilities to new monitors as well as any legacy monitor with a video output. The recording accessory line allows you to buy the configuration you want while maintaining the option to easily upgrade your recording capabilities in the future.
RIDGID SeeSnake reels and cameras are the best in the industry because they are built tough for unmatched performance and longevity. Camera Head • Scratch-resistant, debrisshedding sapphire crystal lens. • 100% stainless steel housing. • High power adjustable LEDs behind a thick polymer plastic window. • 410,000 CCD pixel resolution. • Small camera diameter size (22 mm – 35 mm). • Pipe view (wide angle) technology to be able to clearly see the pipe wall. • Self-leveling option. • Tested water tight to 330’ in length. Push Cable • Fiberglass inner core. • Polypropylene jacket. • Integrated push cable with power/video signal. • 512Hz FleXmitter® transmitter included with all systems.
M-spector™ av 2312-21
M12 Extended Life XC Battery
48-11-2402
• 2X run-time: more work on each charge • Increased performance: up to 30% more power and up to 40% faster application speed • Rubber over-molded base: prevents tool from sliding and protects finished surfaces from marring
M12 3/8” Right angle
drill 2415-21 • 3/8” single sleeve ratcheting chuck • 3¾” head length • Extended paddle switch • Electronic clutch • Built-in LED’s • On-board fuel gauge Winter 2010
• 2 GB SD card (included) and USB port • Integrated microphone and speaker • Easy, one-handed control pad • 9.5 mm analog flexible camera cable • 3.5” high resolution color LCD
compact band saw
• • • • •
6242-6 45% lighter than deep cut – for cutting overhead and in tight places 200-360 SFPM variable speed dial 3¼” cut capacity LED work light – illuminates the cut line in tight spaces and dark areas Tool-free adjustable material shoe
M12 PVC Shear 2470-21
• Patent-pending shear mechanism: cuts PVC up to 2” (2-3/8” O.D.) in 3 seconds or less • All metal planetary drive: delivers over 200 cuts per charge • Stainless steel blade and sealed aluminum jaw: impact and water-resistant • On board fuel gauge: displays remaining run time
jobsite radio
2790-20 • Exclusive AM/FM tuner with digital processor • Premium speakers and 40 watt amplifier • Weather sealed auxiliary compartment • AC/DC versatility • Shock absorbing ABS Polymer and Steel construction • Customizable equalizer and 10-station preset
F.W. WEBB COMPANY
29
Tools/Safety C CUTTERS
electric hydrostatic test pumps
TC1SL / TC50SL / TC75SL
Everyone needs a handy cutter (or two) like Reed’s spring-loaded C Cutter. This easy-togrip cutter easily snaps on to copper tubing for a quick, clean cut. Just turn the cutter in the direction of the arrow and the cut will be complete in seconds. The spring-loaded cutter wheel self-feeds with consistent pressure as the tool is turned around the tubing. Compact c-shape with no handle swing space required means this cutter is great for low clearance areas. Each cutter fits just one popular size of copper tubing and the cutter wheel is replaceable.
EHTP500 and EHTP500C Features: • Pressure test water systems, in both residential and commercial buildings • Hose features a quick disconnect with built-in check valve • Smooth running, quiet motor EHTP500C
Roll Groover RGCOMBO2
2-in-1 unit for power and manual roll grooves. Capacity of 1¼” – 6” for up to Sch. 40 steel, stainless steel and aluminum pipe. No groove roller or shaft changeout required. Includes both straight and bent handle ratchet wrenches. Compact, portable design with built-in handle for improved mounting and transporting. All gears enclosed in the casting to minimize debris entering tool. Consistent tracking makes this tool great to use time after time.
EHTP500
Pipe Capacity: Nominal in 1", 1/2" and 3/4"
Improve Your Plant Safety As your supply partner, the F. W. Webb Company provides you with comprehensive product application support. Together with the Haws Corporation, we can improve facility safety, utilizing emergency eyewash and emergency shower equipment. This program is called the Risk, Response & Readiness Program −“R3”.
Risk, Response & Readiness—“R3” Here’s how it works: • Registration: Contact your local F. W. Webb account manager to review program details and registration form. • Education: F. W. Webb and Haws representatives will schedule in-plant seminars for your staff on the use of eyewashes, eye/face washes and emergency drench showers and related safety procedures. • Survey: F. W. Webb and Haws representatives will work with your staff to develop a comprehensive analysis of the state of your emergency response capabilities. • Report: The emergency response survey will trigger a confidential structured report to be presented to the appropriate people at your facility. • Action Plans: An action plan and timeline will be generated for accomplishing any up-grades or alterations needed to bring your equipment into compliance.
30
F.W. WEBB COMPANY
For more information on our “R3” training, please contact Dean Plouffe at 800.344.9322 or dean@fwwebb.com.
www.fwwebb.com
Safety Kwik Kit Safety Railing Kits • Strong and safe, exceeds OSHA and BOCA standards • Corrosion resistant fittings • Safety yellow powder coat for high visibility • Easy assembly using a standard hex key • Available in galvanized or aluminum • Ability to secure using bolts or chemical anchors • Standard 1½” pipe Kwik Kit Safety Railing Kits Corner Kit allow you to create a sturdy railing system with no welding or threading, while giving you the added visible advantage of yellow safety rails. These railing kit are very quick to assemble 6’ Extension Kit using only a standard hex key Available in pre-packaged Corner, Straight and to tighten the large, easy to Extension Kits use set screws. Kwik Kit Safety Railing Kits are pre-packaged and provide 6-foot post spacing for straight sections, corner Straight Kit sections or extension sections. The rails may be cut where shorter sections are required. The kits may be secured using bolts or chemical anchors attached to the base fittings.
Winter 2010
Kee Lite Aluminum Fittings Fitting Function with Style
Handrails / Lighting Grids / Store Fixtures / Playgrounds / Guardrails / Set Design & Props • Large set screws, easy installation & strong grip • Esthetic look and design • Light weight • Corrosion resistant • Hidden set screw for smooth aesthetics • Low long term maintenance • To be used with 1”, 1¼” or 1½” pipe sizes • Available from stock Kee Lite fittings can be easily installed with a hex key and pipe cutters, there is no need to weld, thread or drill, saving you both time and money.
Water Treatment Facilities • Industrial/Commercial • Institutional Corrosive Environments • Retail & Restaurant Design • Municipal
Now Available in 24 different models
F.W. WEBB COMPANY
31
Presorted Standard US Postage Paid Permit No. 12 Bedford, MA
F.W. WEBB COMPANY 160 Middlesex Turnpike Bedford, MA 01730 www.fwwebb.com We Honor:
F. W. Webb is a participant in American Express’s Corporate Procurement Card Program.
F. W. Webb Company is in no way responsible for any printing errors, omissions or typos in the WinSheet.
Through www.fwwebb.com to WebbConnect, you can: Place Orders • Get Pricing • Check Inventory Evaluate Heat Loss/Gain • E-mail
73 Convenient Locations MAINE Augusta 800-322-4700 Bangor 800-432-7371 Biddeford 800-443-0505 Caribou 800-339-3029 Ellsworth 888-882-9322 Lewiston 800-252-2000 S. Portland 800-482-0791 Rockland 800-287-0015 West Bath 800-427-7990 Winslow F. W. Webb 800-640-9322 Kennebec Supply Kentrol/Sevco 800-533-1172 RHODE ISLAND Cranston 800-795-6390 Webb Pump 866-850-7867 Webb Bio-Pharm 877-932-2246 Warwick 888-225-6850
MASSACHUSETTS Auburn 800-872-0211 Bedford 800-221-9322 Bellingham 508-966-4999 Boston 617-482-8387 Brockton 800-544-9322 Canton 781-828-5559 Dedham 800-820-9322 Fitchburg 800-322-0899 Gloucester 978-283-7800 Greenfield 800-564-3644 Haverhill 800-521-7499 Hingham 781-749-9322 Hyannis 800-352-3159 Lowell 800-642-9322 Malden 800-963-7111 Methuen 866-548-9322 Utilities Supply 800-343-7555
New Bedford Babbitt 888-354-0048 Northampton 800-282-7721 Pittsfield 800-578-9322 Plymouth 508-830-0125 Salem 800-345-5025 Springfield 800-660-3141 Sturbridge - Pipe Depot 508-347-3342 Woburn 800-253-7838 NEW HAMPSHIRE Concord 888.508.0050 Dover 800-582-7196 Exeter 888-993-9322 Gilford 800-345-1771 Keene 800-235-1218 Lebanon 800-322-8707 Madison 800-852-9203 Manchester 800-789-6488 Nashua 800-462-1440
NEW YORK Albany 800-432-9322 Binghamton 888-593-9322 Cazenovia 315-655-9701 Clyde 800-828-8824 Newburgh 877.494.9322 Plattsburgh 800-622-9322 Queensbury 800-826-0326 Syracuse 800-262-9222 Utica 315-724-3191
VERMONT Barre 800-244-5044 Bennington 800-821-9506 Brattleboro 800-821-9511 Rutland 800-622-4365 Springfield 800-872-5303 St. Albans 800-696-3763 St. Johnsbury 800-872-8028 Williston 800-696-0340
CONNECTICUT Franklin 888-642-9086 Hartford 800-252-9322 Hartford – Victor 800-243-9360 New Haven 800-636-7524 Waterbury 800-572-6479
F.W. Webb is a member of the following associations: A-D (Affiliated Distributors), ISPE, TAPPI, NECCARAPA, MCAA and MHEC.
For questions or comments, please email Carol Rosinski (Production Manager) at crr@fwwebb.com.
New Year’s is always a good time to thank our customers for their business and our employees for their loyalty and service. 2010 will be challenging as there seems to be too many cooks in the economic kitchen. Nevertheless, we have built our inventories to make sure that when you need anything in plumbing, heating, ventilating, cooling, pipe,valves,fittings, refrigeration, LP, fire protection, pipe fabrication, industrial hose, industrial pumps, water systems, bio-pharm, steam systems, controls & instrumentation and industrial plastic piping,…”WE’VE GOT IT!” Happy New Year!!
John Pope, CEO • jp@fwwebb.com Jeff Pope, President • jsp@fwwebb.com