RBL Professional Barrel Regulator YOUR RBL PROFESSIONAL HAS BEEN REGULATED AT 50 METERS WITH WINCHESTER SUPER X 5/8 OZ. 20 GAUGE SABOT SLUGS. REGULATION TARGET HAS BEEN PROVIDED WITH YOUR GUN.
1.
2.
3.
4.
To adjust the elevation of your RBL Professional. Locate the locking screw on the right side of the barrel by the front sight loosen the screw or turn to the left to begin your adjustment.
Next, locate the elevation screw located in the center of the barrel regulator on the underside of the barrel. Loosening or turning the screw to the left will lower the right barrel elevation. Tightening or turning to the right will raise the elevation.
Be sure to return to the locking screw located on the right side of the barrel at the base of the front sight to tighten or turn to the right before firing.
To adjust the windage of your RBL Professional. Locate the locking screw at the bottom of barrels near the center of the regulator, Loosen the locking screw or turn to the left.
5.
6.
Next, locate the windage screw located on the top of the muzzle face directly in the center. Loosening the screw or turning it to the left will move the Point of impact toward the center. Tightening the screw or turning it to the right will move the point of impact outward.
Remember, to locate the locking screw located on bottom of the barrels in the center of the regulator to retighten the screw or turn to the right.
DANGER: THIS IS VERY IMPORTANT DO NOT FIRE YOUR RBL PROFESSIONAL WITHOUT THE LOCKING SCREWS BEING TIGHT.