UNI 2

HYDROMETTE®

UNI 2

APPLICATION Measuring structural moisture using the UNI 2 unit and an M

21-250 deep measuring electrode pair

[left] and measuring the relative humidity in boring using RH-T 37 active electrode [right]

The UNI 2 is an electronic multipurpose meter for three measured values. It can be used with active electrodes for measuring structural moisture, air humidity, and temperature. Additionally, all structural moisture measuring electrodes that are based on the resistance principle of measurement may be connected to the UNI 2 unit.

The following (active) electrodes may be

connected: Refer to page 54 »UNI 1«.

MEASURING RANGES n STRUCTURAL MOISTURE – Refer to the overview on page 57 –n AIR HUMIDITY 0 to 100% R.H. n TEMPERATURE -50 to +600 °C

depending on Pt100 temperature sensor n Infrared measuring range -20 to +199.9 °C

using IR 40 EL

PROPERTIES n Quick measurement of moisture in set building materials using the resistance-based and capacitive radio frequency measuring techniques n Temperature measurement precision is achieved by Pt100 measuring resistors connected in 4-wire technology n Housing: 140 [L] x 90 [W] x 42/50 mm [H]

using RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex

ACCESSORIES INFO BOX

M 6 M 6-150/250 M 6-Bi 200/300

RF-T 28 EL RH-T 37 EL 165/320 RH-T 37 EL flex 250/350

RF-T 28 EL RH-T 37 EL 165/320 RH-T 37 EL flex 250/350

OTW 90 OT 100 OTW 480

For packages, please refer to page 58.

M 20 M 20-OF 15 M 20-Bi 200/300 M 21-100/250 M 25-100/300 B 50 B 60 LB 71

LT 20

IR 40 EL