CLASSIC
ORDER CODE 30001550
HYDROMET TE ® UNI 2
APPLICATION Measuring structural moisture using the UNI 2 unit and an M 21-250 deep measuring electrode pair [left] and measuring the relative humidity in boring using RH-T 37 active electrode [right]
The UNI 2 is an electronic multipurpose meter for three measured values. It can be used with active electrodes for measuring structural moisture, air humidity, and temperature. Additionally, all structural moisture measuring electrodes that are based on the resistance principle of measurement may be connected to the UNI 2 unit.
n
TEMPERATURE -50 to +600 °C depending on Pt100 temperature sensor
n Infrared
measuring range -20 to +199.9 °C using IR 40 EL
PROPERTIES Quick measurement of moisture in set building materials using the resistance-based and capacitive radio frequency measuring techniques n Temperature measurement precision is achieved by Pt100 measuring resistors connected in 4-wire technology n Housing: 140 [L] x 90 [W] x 42/50 mm [H] n
The following (active) electrodes may be connected: Refer to page 54 »UNI 1«. MEASURING RANGES STRUCTURAL MOISTURE – Refer to the overview on page 57 – n AIR HUMIDITY 0 to 100% R.H. n
using RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex 53
ACCESSORIES INFO BOX M6
M 6-150/ 250
For packages, please refer to page 58. M 6-Bi 200/300
M 20
M 20-OF 15
M 20-Bi 200/300
M 21-100/250
TT 480
TT 600
FT 2-30
RF-T 28 EL RH-T 37 EL 165/320 RH-T 37 EL flex 250/350 RF-T 28 EL RH-T 37 EL 165/320 RH-T 37 EL flex 250/350
LT 20
OTW 90
OT 100
OTW 480
IR 40 EL
ET 10
TT 40
TT 30
ET 50
M 25-100/300
B 50
B 60
LB 71
