Catalogo hidráulico Global Fire and Security Solutions 2014 by Global Fire Solutions

Sector Hidrรกulico

2 Acerca de Nosotros Global Fire and Security Solutions, SAS es una empresa proveedora de servicios de ingeniería y gerencia de proyectos enfocada en proveer soluciones en protección de vidas y bienes para el mercado petrolero, industrial y comercial de Latinoamérica y el Caribe. El elemento diferenciador principal de nuestra empresa es el enfoque en el cliente, de tal forma que no comercializamos productos sino soluciones a los problemas de protección de nuestros clientes. Además, nos centramos en los aspectos principales del servicio al cliente que son la debilidad principal de la competencia y en esencia lo que buscan nuestros potenciales aliados: Atención a sus requerimientos Asistencia técnica confiable y ética Capacidad de detectar problemas y de plantear soluciones efectivas Soluciones orientadas al cliente y no a la conveniencia del proveedor Confianza Rapidez de respuesta

3 Nuestros productos y servicios La protección de vidas de nuestros clientes engloba muchas áreas multidisciplinarias que deben ser integradas adecuadamente. Nuestros servicios globales incluyen: Gerencia de Riesgo y Consultoría de Riesgos Gerencia de Proyectos de protección de vidas y bienes Ingeniería de Incendios Soluciones llave en mano de protección contra incendios Suministro de equipos contra incendios como parte de las soluciones a nuestros clientes Instalación de sistemas contra incendios Gestión de mantenimiento de sistemas contra incendios Seguridad Electrónica Integración tecnológica de sistemas contra incendios y sistemas de control y automatización de procesos

Gerencia de Riesgos: es un enfoque estructurado para manejar la incertidumbre relativa a una amenaza, a través de una secuencia de actividades humanas que incluyen evaluación de riesgo, estrategias de desarrollo para manejarlo y mitigación del riesgo utilizando recursos gerenciales.

Gerencia de Proyectos de Protección de Vidas y Bienes: Un problema frecuentemente identificado en los clientes es la necesidad de implantación de una solución de protección de vidas y bienes y de no poseer el conocimiento para coordinar las diferentes fases y actores del proceso. Global Fire and Security Solutions, SAS ofrece organizar y armonizar todas las fases del proceso, bien sea aportando una solución integral, o integrando soluciones parciales de distintos proveedores. Esto redunda en ahorros de dinero para el cliente y garantia de funcionamiento de la solucion implantada. Ingeniería de Sistemas Contra Incendios: Global Fire and Security Solutions, SAS cuenta con los Ingenieros de la más amplia experiencia en la elaboración de proyectos de protección contra incendios, ajustados a los requerimientos normativos tanto nacionales como internacionales. Nuestros proyectos son elaborados para satisfacer exigencias de las normas NSR-10, NFPA, API, entre otras, y/o los lineamientos que establezcan consultoras de riesgo y reaseguradoras como Zurich, GEGAP, Factory Mutual Research (FM), Global Risk Consultant (GRC), Lloyds, o prácticas corporativas recomendadas especificas para cada empresa, industria o comercio.

4 Soluciones Integrales en Bombas Contra Incendios

Paquetes UL/FM para aplicaciones comerciales, industriales y petroleras

Soluciones Integrales en Extinci贸n de Incendios por Agua y Espuma

5 Soluciones Integrales en Extinci贸n por Agentes Limpios

Soluciones Integrales en Detecci贸n de Incendios

Soluciones Integrales en Fire and Gas

L铆nea PRO 2000 X de Mircom Detecci贸n de Gas y Llama al alcance de cualquier inversion

6 Soluciones Integrales en Seguridad Electrónica

Permítanos ser sus aliados en protección de vidas y bienes Global Fire and Security Solutions, SAS se complace en poder garantizar la continuidad de los negocios de sus clientes. Por esta razón nos permitimos invitarlo a Usted a una demostración de nuestra capacidad de brindarle el mejor apoyo en la solución de sus problemas de protección de vidas y bienes. No dude en contactarnos. Dirección: Autopista Medellín, Km 2.5 Vía Parcelas Km 1.3 Parque Industrial AEPI Bodega 4 Cota – Cundinamarca

7 Anexos Sector Hidráulicos – Hojas Técnicas Global Fire and Security Solutions, SAS se complace en diseñar, proveer e instalar equipos de primera linea para sus soluciones de extinción por agua. En las páginas siguientes nuestro apreciado cliente encontrará las hojas técnicas de algunos de los equipos que comercializamos. Estos incluyen:      

Bombas Contra Incendios Válvulas – De alarma – Check – Gabinetes - Seccionamiento Rociadores Mangueras Gabinetes de mangueras Accesorios Ranurados

8 Paquetes de Bombas Contra Incendio NO normalizadas Especialmente diseñadas para cubrir el mercado nacional tanto residencial como industrial donde no se requiera al cumplimiento de normas internacionales. Nuestros paquetes incluyen bombas de alta calidad, preensambladas con la bomba jockey y el tablero de control, en un skid “all in one” que permite al instalador ahorrar tiempo y dinero en obra. Caracteristicas:  Equipo con bomba pirncipal, bomba jockey, tablero de control y valvulas, aplicado a la protección contra incendio.  Diseñado y fabricado para garantizar un alto grado grado de proteccón a precio accesible  Larga vida útil  Diseñado de acuerdo a las especificaciones del cliente  Variedad de tableros de control  Equipos automáticos y sincronizados de acuerdo a la demanda de la red.  Bomba principal tipo Centrífugas monoblock de construcción robusta, eficiente y con diseño que facilita mantenimiento.  Caudales desde 100 gpm a 1500 gpm de 100 psi a 150 psi  Bombas end suction y carcaza partida  Tensiones de trabajo de 220 VAC y 440/480 VAC

9 Paquetes de Bombas Contra Incendio NORMALIZADAS Especialmente diseñadas para cubrir el mercado nacional tanto residencial, industrial y petrolero donde se requiera al cumplimiento de normas internacionales. En el area de las bombas contra incendios y/o redes de incendio Global Fire and Security Solutions, SAS es representante de la marca PEERLESS/GRUNDFOS. Hay miles de instalaciones con bombas PEERLESS/GRUNDFOS Pump (UL ULC o FM) que dan una protección optima, en caso de incendio, en instalaciones alrededor del mundo. Por más de 80 años PEERLESS/GRUNDFOS Pump ha ofrecido un servicio completo desde la ingeniería, incluyendo la instalación hasta la puesta en marcha de sus equipos. Los productos son diseñados contando con una amplia gama de bombas, transmisiones, controles, accesorios y otros. Dentro de la gama de bombas para escoger contamos con: Horizontales, en Línea y turbinas verticales, entre otras. En los sistemas de bombas para incendio, Peerless Pumps puede diseñar y construir desde una bomba con su motor en una pequeña base, hasta un equipo integrado compacto con todos sus controles y elementos, con alternativas de motores diesel, motores eléctricos, fittings…etc, de manera de cumplir con las normas NFPA 20. Los sistemas son fabricados con una vasta experiencia, PEERLESS/GRUNDFOS Pump es la empresa lider a nivel mundial en sistemas de protección contra incendios.

Cuando la Confiabilidad es importante - Confíe en Peerless

Bombas Contra Incendio Horizontales de Carcaza Bipartida, Turbina Vertical, En-Línea y Succión al Extremo

Unidades de Bombas Contra Incendio, y Sistemas Paquete en Caseta Peerless Pump Miles de instalaciones de Peerless Pump (Aprobadas por UL, ULC o FM) proporcionan protección avanzada contra incendios en todo el mundo. Durante más de ochenta años, Peerless ha ofrecido servicio completo que va desde la ingeniería y fabricación, hasta la puesta en marcha del equipo. Los sistemas se diseñan a partir de una amplia selección de bombas, motores, controles, bases y accesorios. Las opciones de bombas incluyen modelos horizontales, en-línea y succión al extremo, centrífugas así como turbinas verticales.

Tanto los modelos horizontales como los verticales se pueden surtir en capacidades de hasta 5,000 gpm. Los modelos de succión al extremo pueden ofrecer capacidades hasta 1,500 gpm. Las unidades en-línea pueden producir 500 gpm. La carga tiene un rango de 92 ft a 1,176 ft. con hasta 640 psi. La bombas se pueden equipar con motores eléctricos, diesel o turbinas de vapor. Las bombas estándar son de fierro vaciado con conectores de bronce. Los conectores y accesorios suministrados son los que recomienda la NFPA en su panfleto vigente.

Aplicaciones Las aplicaciones van desde las pequeñas unidades básicas con motor eléctrico a los sistemas paquete en caseta impulsados por motor diesel. Las unidades estándar manejan agua dulce, pero se cuenta con materiales para aplicaciones de agua de mar. Las Bombas Contra Incendio Peerless Pump proporcionan un desempeño superior en las aplicaciones para la Agricultura, Industria General, Edificios, Industria Energética, Protección Contra Incendios, Municipal y de Procesos.

Características Los sistemas de vanguardia sobre diseño se entregan listos para instalarse. Todos los sistemas sobre diseño cuentan con cableado completo para interconexión. La pre-construcción elimina a los costosos y complejos problemas de instalación. La fabricación propia le proporciona a Peerless Pump la habilidad de hacer el sistema a la medida de las necesidades del cliente y así asumir la responsabilidad completa por la unidad, lo cual significa que el cliente solo tiene que contactar a un solo proveedor si surgen preguntas o dudas. Todas las casetas de bombas cumplen con los requerimientos de UL, ULC, FM, NFPA13, NFPA20, y MBMA. El amplio sistema de distribución de Peerless Pump proporciona soporte técnico y comercial alrededor del mundo con su personal calificado.

Ingeniería de Alta Calidad Peerless diseña productos resistentes y versátiles que cumplen con las necesidades de sus clientes. Las bombas y sistemas contra incendio así como los sistemas paquete en caseta ofrecen variedad, durabilidad y configuraciones estandarizadas que no tienen igual en la industria. Contacte la oficina de ventas autorizada de Peerless Pump en su localidad para obtener mayor información sobre nuestras equipos contra incendio.

Protección Contra Incendio

Unidades Básicas y Sistemas Paquete

Ha decidido reducir el riesgo de daño por incendio en sus instalaciones, instalando un sistema de bombeo contra incendios con certificación UL, ULC y/o FM. Ahora la decisión está en cuál elegir. Busca una bomba contra incendio que haya sido probada en múltiples instalaciones en todo el mundo, fabricada por un líder de la industria con una amplia experiencia en el área de protección contra incendios. Quiere un servicio completo de asistencia técnica hasta el momento del arranque. Lo que usted quiere es una bomba Peerless.

Las bombas contra incendio con motor eléctrico y/o motor diesel se pueden surtir con cualquier combinación de bombas, motores y accesorios para las aplicaciones contra incendio listadas y aprobadas y las no-listadas. Las unidades y los sistemas paquete reducen los costos de instalación de las bombas contra incendios y ofrecen las siguientes ventajas: Unidad con Motor Diesel

Suministrando Soluciones de Bombeo al Mercado Contra Incendio Mundial, Peerless puede cumplir con todos sus requerimientos: • Líder reconocido en la industria de bombas contra incendio. • Miles de instalaciones de todos los tipos y tamaños. • Nuestro personal altamente calificado nos representa en la mayoría de las grandes ciudades del mundo. • Capacidad de manufactura completa en fábrica. • Prueba de operación mecánica con equipo seleccionado por clientes para todos los estándares NFPA. • Modelos horizontales con capacidad hasta 5,000 gpm. • Modelos verticales con capacidad hasta 5,000 gpm. • Modelos en-línea con capacidad hasta 500 gpm. • Modelos de succión al extremo con capacidad hasta 1,500 gpm. • Motores: eléctrico o diesel. • Unidades básicas, sistemas en paquete o con ingeniería especial.

Sistemas Contra Incendio en Caseta Las casetas de Peerless Pump se diseñan y fabrican con los mas altos estándares de calidad en sus materiales, construcción y mano de obra. Se construyen de acuerdo con los requerimientos de UL, ULC, FM, NFPA13, NFPA20, y MBMA. Todos los sistemas paquete en caseta ofrecen las siguientes ventajas: • • • • • • • • • • • • • • •

Costo predeterminado preciso. Responsabilidad sobre la unidad completa Diseños de vanguardia. Servicios con valor agregado. Soporte Técnico alrededor del mundo. Certificado BSI - ISO 9001:2000 Instalaciones de Manufactura. Listados por Underwriters Laboratories (UL). Factory Mutual (FM) NFPA-20, NFPA-70 y NEC. Certificación ABS. Pruebas en fábrica. Prueba Hidrostática. Servicio y Garantía de un solo proveedor. Listado ETL. Gestión de proyectos y entregas “Fast Track”.

Unidad con Motor Eléctrico

• La bomba, el motor, y el controlador se montan sobre una base común. • Una base común elimina la necesidad de superficies de montaje independientes. • La unidad común minimiza la necesidad de interconectar el cableado y los componentes. • Los equipos llegan en un embarque consolidado, lo que permite un manejo e instalación mas rápidos y sencillos. • Disponibilidad de sistemas sobre diseño, incluyendo accesorios, conexiones y distribu ciones físicas para cumplir con las especificaciones de los cliente. • Nuestra experiencia en ingeniería y diseño aseguran la realización de los requerimientos de diseño.

Las Ventajas PES: Peerless Engineered Systems (PES) tiene la capacidad de diseñar y construir un sistema personalizado para satisfacer sus necesidades. Revisamos los requisitos y el diseño de un sistema que sea adecuado para usted. Si está buscando soluciones simples a problemas complejos, PSE tiene la respuesta. Permítanos construir su sistema contra incendio, mientras usted puede de concentrarse en el resto de su proyecto.

NOTA: Para información detallada sobre la selección, rendimiento, y las dimensiones de los nuestras bombas y sistemas consulte nuestro programa RAPID: Rápido Acceso a la Información y Diseño de la bomba.

Características y Específicaciones de Bombas Contra Incendio

Bombas Horizontales Contra Incendio, Listadas UL y ULC, Aprobadas FM

Bombas En-Línea Contra Incendio, Listadas UL y ULC

Bombas de Succión al Extremo Contra Incendio , Listadas UL y Aprobadas FM

Bombas Verticales Contra Incendio, Listadas UL y ULC, Aprobadas FM

Bombas de carcaza bipartida con los accesorios adecuados para proporcionar un suministro de agua para los sistemas de protección contra incendio en edificios, plantas y jardines. Tipos: AF, ADF, AEF, TUF, TUTF.

Bombas centrífugas compactas en línea contra incendio con accesorios adecuados para suministrar agua a los sistemas de protección contra incendio en edificios, plantas y jardines. Tipo: PVF.

Bombas centrífugas con los accesorios adecuados para suministrar agua o los sistemas de protección contra incendio en edificios, plantas y jardines. Tipo: UNF.

Bombas de turbina vertical con los accesorios adecuados para suministrar agua a los sistemas de protección contra incendio en edificios, plantas y jardines.

Capacidades

250 a 5,000 gmp (57 a 1,136 m3/hr)

50 a 500 gmp (11 a 114 m3/hr)

Hasta 1,500 gmp (114 m3/hr)

250 a 5,000 gmp (57 a 1,136 m3/hr)

Carga

92 a 630 pies (28 a 192 metros)

Hasta 406 pies (123 metros)

Hasta 340 pies (104 metros)

92 a 1,176 pies (28 a 359 metros)

Hasta 640 psi (45 kg/cm2, 4,414kPa)

Hasta 175 psi (12 kg/cm2, 1,207 kPa)

Hasta 147 psi (10 kg/cm2, 1,014kPa)

Según la aplicación

Hasta 800 hp (597 kW)

Hasta 75 hp (56 kW)

Hasta 600 hp (448 kW)

Motores eléctricos horizontales, motores diesel y turbinas de vapor

Motores eléctricos verticales con acoplamiento compacto (close coupled)

Motores eléctricos. horizon- Motores eléctricos verticatales y motores diesel. les y motores diesel con engranes en ángulo recto y turbinas de vapor.

Agua

Ambiente dentro de los límites para la operación satisfactoria del equipo.

Hasta 115°F (46°C)

Hierro fundido con accesorios de bronce.

Hierro fundido con accesorios de bronce como estándar. Se disponen de materiales opcionales para aplicaciones con agua de mar.

Folleto F-1900 Folleto B-1510 (tablas de selección)

Folleto B-1510 (tablas de selección)

Tipo

Presión Caballaje Motores

Líquido Bombeado Temperatura

Hierro fundido con Hierro fundido con Materiales de accesorios de bronce como accesorios de bronce. Construcción estándar. Se disponen de materiales opcionales para aplicaciones con agua de mar. Información Adicional

Folleto B-1510 (tablas de selección)

Bombas Contra Incendio Horizontal de Carcaza Bipartida, Turbina Vertical, En-Línea y Succión al Extremo

Accessorios Para cumplir con las recomendaciones de los estándares de la Asociación Nacional de Protección Contra Incendios tal como se publican en su número actual, se requiere de ciertos accesorios para todas las instalaciones de bombas contra incendios. Sin embargo, variarán de acuerdo con las necesidades de cada instalación individual y los requerimientos de las autoridades de seguros locales. Peerless Pump surte una amplia gama de accesorios que incluye: reducción concéntrica, válvula de alivio de la carcaza, reducción excéntrica, tee, cono de sobreflujo, cabezal de mangueras, válvulas de manguera, tapas y cadenas de válvula de manguera, manómetros de succión y descarga, válvula de alivio, válvula automática de liberación de aire, flujometro y válvula de bola de goteo. Sin importar los requerimientos, Peerless cuenta con una línea completa de accesorios y puede satisfacer los requerimientos de cada instalación. Los gráficos que se presentan a continuación ilustran los múltiples accesorios así como los motores opcionales que se encuentran disponibles para todas las bombas contra incendio y sistemas paquete Peerless.

Válvula Automática de Liberación de Aire Manómetro de Succión de Tipo Compuesto

Tapa y Cadena de Válvula de Manguera

Edificio

Bombas Horizontales Contra Incendio Peerless

HACIA LA

Manómetro de Descarga Niple

Válvula

Turbina de Vapor Horizontal

Cono

HACIA EL DESAGÜE

Protector de Manómetros (en algunas aplicaciones con alta presión)

Codo

Válvula de Alivio

Cabezal de Mangueras Exterior (el número de válvulas de manguera es variable)

Válvula de Drenaje

Válvula de Alivio de la Carcaza

Cabezal MANGUERA de Mangueras

HACIA EL DESAGÜE

SUMINISTRO

Cono (bridado)

DE AGUA Válvula

Reductor de Succión Excéntrico

Tee

HACIA EL DESAGÜE

HACIA EL DESAGÜE (con presión inversa) Válvula

Tee

Flujómetro

Válvula

O SUMINISTRO

TUBO Y CONEXIONES PARA LÍNEA DE PRUEBA

HACIA EL SISTEMA Motor Eléctrico Horizontal

Reducción concéntrica Válvula Check (cuando no se utiliza la tee de descarga)

Bombas Verticales Contra Incendio Peerless Engrane de Ángulo Recto

Turbina de Vapor Horizontal

Tee

Válvula

Válvula Automática de Liberación de Aire (conexiones y bridas para motor o turbina de vapor)

Motor Eléctrico Vertical

Edificio

Motor Diesel

HACIA LA Niple Válvula de Manguera MANGUERA Cabezal de Mangueras Exterior

Válvula Codo Válvula de Alivio

Tee

Tapa y Cadena de Válvula de Manguera

(el número de válvulas de manguera es variable)

Válvula de Drenaje Manómetro de Descarga

Motor Diesel

Medidor de Nivel de Agua extendido al Colador (solo en instalación en pozo profundo)

Columna (con rosca o bridada)

ENSAMBLE DE DESCARGA

Cono (bridado)

Tee

HACIA EL DESAGÜE

HACIA EL DESAGÜE (con presión inversa)

Tee

Válvula

Flujometro

Brochure B-1500.

Tazones Intermedios Succión de Campana

Colador Canasta (instalación de sumidero)

Válvula

TUBERÍA Y CONEXIÓNES DE LÍNEA DE PRUEBA SUMINISTRO

Tazón de Descarga (roscado o bridado)

SUMINISTRO DE AGUA

Reducción Concéntrica (cuando no se utiliza la tee de descarga)

HACIA EL Válvula Check

Válvula

SISTEMA

Tee

Peerless Fire Pump Packages

Peerless Pump Fire Pump Systems

Quality Engineering

The Peerless Package With over 75 years of experience, Peerless Fire Pump Packages provide a fire pump that’s proven in thousands of installations worldwide. These systems are manufactured by an industry leader with vast experience in the fire protection field. When you require complete service, from engineering assistance to field start-up, you want a Peerless Pump. Peerless Pump means years of experience in evaluating actual operating conditions to anticipate problems, needs and future requirements. Peerless Pump means fieldproven experience in translating that information into a truly integrated custom-built Fire Pump Package that’s as individual as the application demands.

Applications In packaged Fire Pump Systems, Peerless can design and build engineered systems from a simple pump and driver arrangement on a skid to a fully-enclosed, completely-integrated pump and control center, with a choice of diesel or electric drivers, and all the required controllers, ﬁttings and ancillary equipment per NFPA 20.

Peerless Pump designs tough, versatile products to meet your pumping needs. A complete line of Fire Pumps that are U.L. (Underwriter’s Laboratories) listed and FM (Factory Mutual) approved. The industry’s most comprehensive product line includes inline, end suction horizontal split case and vertical turbine models.

T he Peer less UL/FM Fire Pump System Designed to your speciﬁcations, Peerless Packaged UL/FM Fire Pumps come with or without enclosures, with one or more pump/driver combinations, and include controls with inlet/outlet piping/ valves and ﬁttings per NFPA 20.

Peerless Pump Company 2005 Dr. Martin Luther King Jr. Street Indianapolis, IN 46202 (317) 925-9661, Fax: (317) 924-7388 www.peerlesspump.com

Rociadores Automáticos – Válvulas

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

67$1'$5' 5(63216( $8720$7,& 635,1./(56 */ 6(5,(6 835,*+7 3(1'(17 9(57,&$/ 6,'(:$// +25,=217$/ 6,'(:$// &219(17,21$/ 2/' 67</(

'(6&5,37,21 $1' 23(5$7,21 7KH *OREH */ 6HULHV 6SULQNOHU LV D ORZ SURILOH \HW GXUDEOH GHVLJQ ZKLFK XWLOL]HV D IUDQJLEOH JODVV DPSXOH DV WKH WKHUPRVHQVLWLYH HOHPHQW : KLOH WKH VSULQNOHU SURYLGHV DQ DHVWKHWLFDOO\ SOHDVLQJ DSSHDUDQFH LW FDQ EH LQVWDOOHG ZKHUHYHU VWDQGDUG VSUD\ VSULQNOHUV DUH VSHFLILHG 7KLV VSULQNOHU VHULHV LV DYDLODEOH LQ YDULRXV VW\OHV RULILFHV WHPSHUDWXUH UDWLQJV DQG ILQLVKHV WR PHHW YDU\LQJ GHVLJQ UHTXLUHPHQWV 7KH KHDUW RI *OREH V */ 6HULHV VSULQNOHU SURYHQ DFWXDWLQJ DVVHPEO\ LV D KHUPHWLFDOO\ VHDOHG IUDQJLEOH JODVV DPSXOH WKDW FRQWDLQV D SUHFLVHO\ PHDVXUHG DPRXQW RI IOXLG : KHQ KHDW LV DEVRUEHG WKH OLTXLG ZL W K L Q W K H E X O E H [S D Q G V L Q F U H D V L Q J W K H L Q W H U Q D O SUHVVXUH $W WKH SUHVFULEHG WHPSHUDWXUH WKH LQWHUQDO SUHVVXUH ZLWKLQ WKH DPSXOH H[FHHGV WKH VWUHQJWK RI WKH JODVV FDXVLQJ WKH JODVV WR VKDWWHU 7KLV UHVXOWV LQ ZDWHU GLVFKDUJH ZKLFK LV GLVWULEXWHG LQ DQ DSSURYHG SDWWHUQ GHSHQGLQJ XSRQ WKH GHIOHFWRU VW\OH XVHG

835,*+7

3(1'(17

7(&+1,&$/ '$7$

6HH UHYHUVH VLGH IRU $SSURYDOV DQG 6SHFLILFDWLRQV 7HPSHUDWXUH 5DWLQJV ) & ) & ) & ) & ) & ) &

) & $YDLODEOH 8SRQ 5HTXHVW : LWKRXW $SSURYDOV : DWHU : RUNLQJ 3UHVVXUH 5DWLQJ SVL %DUV

)DFWRU\ WHVWHG K\GURVWDWLFDOO\ WR SVL %DUV

0D[LPXP ORZ WHPSHUDWXUH JODVV EXOE UDWLQJ LV ) &

)UDPH EURQ]H 'HIOHFWRU EUDVV 6FUHZ EUDVV /RGJHPHQW 6SULQJ VWDLQOHVV VWHHO %XOE VHDW FRSSHU 6SULQJ QLFNHO DOOR\ 6HDO WHIORQ %XOE JODVV ZLWK JO\FHULQ VROXWLRQ PP VL]H

+25,=217$/ 6,'(:$//

&219(17,21$/

9(57,&$/ 6,'(:$//

/3& &( +25,=217$/ 6,'(:$//

635,1./(5 7(03(5$785( 5$7,1* &/$66,),&$7,21 DQG &2/25 &2',1* &/$66,),&$7,21 25',1$5< ,17(50(',$7( +,*+ (;75$ +,*+ 8/75$ +,*+

$9$,/$%/( 635,1./(5 7(03(5$785(6 ) ) ) ) ) ) )

& & & & & & &

%8/% &2/25 25$1*( 5(' <(//2: *5((1 %/8( 0$89( % /$ & .

$,53$5. '5,9( 67$1',6+ 0,&+,*$1 -8/<

$ www.globalfire.com.co - PBX: (+571) 898.54.55

1 ) 3 $ 0$;,080 &(,/,1* 7(03(5$785( ) ) ) ) )

& & & & &

)$; %8//(7,1 */ 5(9

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

67$1'$5' 5(635216( $8720$7,& 635,1./(56 */ 6(5,(6

835,*+7 3(1'(17 9(57,&$/ 6,'(:$// +25,=217$/ 6,'(:$// &219(17,21$/ 2/' 67</(

63(&,),&$7,216

120,1$/ . )$&725

7+5($' 6,=(

/(1*7+

PHWULF

137

PHWULF

137

PHWULF

137

PHWULF

137

PHWULF

137

),1,6+(6 )DFWRU\ %URQ]H &KURPH :KLWH 3RO\HVWHU %ODFN 3RO\HVWHU :D[ &RDWHG

0(75,& &219(56,216 $5( $3352;,0$7( +25,=217$/ 6,'(: $// ,6

),1,6+(6 $9$,/$%/( 21 63(&,$/ 25'(5

$9$,/$%/( $6 F8/XV /,67(' &25526,21 5(6,67$17 : +(1 63(&,),(' 21 25'(5

: $; &2$7,1* F8/XV /,67(' 83 72 ) 21/<

$33529$/6

67</(

835,*+7

3(1'(17

9(57,&$/ 6,'(:$//Á

+25,=217$/ 6,'(:$//

&219(17,21$/ 2/' 67</(

6,1 02'(/

) ) ) & & &

. )$&725

+$=$5'

;

$ //

;

$ //

;

$ //

;

$ //

;

$ //

;

$ //

;

) ) ) ) & & & &

/3 &

;

/+ 2+

;

*/ ͞

/+ 2+

;

/+ 2+

;

/+ 2+

;

/+ 2+

;

635,1./(56 6+$// %( /,0,7(' $6 3(5 7+( 5(48,5(0(176 2) 1)3$ $1' $1< 27+(5 5(/$7(' '2&80(176

+25,=217$/ 6,'(: $// F8/XV /,67(' )25 '()/(&725 72 %(/2: 7+( &(,/,1* )0 $33529(' 72 %(/2: 7+( &(,/,1* ͞ ,167$// ,1 $&&25'$1&( 72 %6 $1' $1< 27+(5 5(/$7(' '2&80(176 Á

1<& '2% 0($ (

F8/XV

3(1'(17 9(57,&$/ 6,'(: $// 0,1 63$&,1*

) 12 )0 $33529$/6 $// $// +$=$5'6 2+ 25',1$5< +$=$5' /+ /,*+7 +$=$5' 137

835,*+7 9(57,&$/ 6,'(: $// 8/ 0,1 63$&,1* ) $9$,/$%/( 8321 5(48(67 : ,7+ 12 $33529$/6

*/2%( 352'8&7 :$55$17<

25'(5,1* ,1)250$7,21

63(&,)<

4XDQWLW\ 0RGHO 1XPEHU 6W\OH 2ULILFH 7KUHDG 6L]HV 7HPSHUDWXUH )LQLVKHV GHVLUHG 4XDQWLW\ : UHQFKHV 3 1 3 1

*OREH DJUHHV WR UHSDLU RU UHSODFH DQ\ RI LWV RZQ PDQXIDFWXUHG SURGXFWV IRXQG WR EH GHIHFWLYH LQ PDWHULDO RU ZRUNPDQVKLS IRU D SHULRG RI RQH \HDU IURP GDWH RI VKLSPHQW )RU VSHFLILF GHWDLOV RI RXU ZDUUDQW\ SOHDVH UHIHU WR 3ULFH /LVW 7HUPV DQG &RQGLWLRQV RI 6DOH 2XU 3ULFH /LVW

$,53$5. '5,9( 67$1',6+ 0,&+,*$1 )$; ZZZ JOREHVSULQN OHU FRP -8/<

35,17(' 8 6 $

www.globalfire.com.co - PBX: (+571) 898.54.55

%8//(7,1 */ 5(9

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

MODEL GL1160 EXTRA LARGE ORIFICE AUTOMATIC SPRINKLERS FOR USE IN NFPA 13 SYSTEMS

DESCRIPTION

AND

OPERATION

The Globe Model GL1160 Extra Large Orifice Sprinkler for use in NFPA 13 Systems is a low profile yet durable design which utilizes a 5mm frangible glass ampule as the thermosensitive element. The main use of this sprinkler is when minimal pressure is available and the use of smaller size orifice sprinklers would require the installation of a pump. This sprinkler series is available in various styles, temperature ratings and several finishes to meet many varying design requirements. The heart of Globe's Model GL1160 sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern.

PENDENT

TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Rating - 155°F (68°C), 175°F (79°C), 200°F (93°C), 286°F (141°C). Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67°F (-55°C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with glycerin solution, 5mm size.

SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION

AVAILABLE SPRINKLER TEMPERATURES

BULB COLOR

N .F.P.A. MAX IMUM CEILIN G TEMPERATURE

ORDINARY

155°F

68°C

RED

100°F

38°C

INTERMEDIATE

175°F/200°F

79°C/93°C

YELLOW/GREEN

150°F

66°C

HIGH

286°F

141°C

BLUE

225°F

107°C

989-846-4583

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 MARCH 2003

A-80 www.globalfire.com.co - PBX: (+571) 898.54.55

FAX 989-846-9231

BULLETIN GL1160, REV. #2

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

MODEL GL1160 EXTRA LARGE ORIFICE AUTOMATIC SPRINKLERS FOR USE IN NFPA 13 SYSTEMS

SPECIFICATIONS NOMINAL "K" FACTOR

11.5

THREAD SIZE

(166 metric)

3/4" NPT

NOTE: METRIC CONVERSIONS ARE APPROXIMATE.

LENGTH

FIN ISHES

2 7/16" (6.19 cm)

Factory Bronze *Satin Chrome Bright Chrome White Polyester+ Black Polyester+ *Lead Coated

*FINISHES AVAILABLE ON SPECIAL ORDER. +AVAILABLE AS UL LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER.

APPROVALS STYLE PENDENT

SIN K MODEL FACTOR GL1160

155°F 68°C

175°F 79°C

200°F 93°C

286°F 141°C

cULus

NYC - DOB MEA 101-92-E

11.5

GLOBE® PRODUCT WARRANTY

ORDERING INFORMATION

Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List).

SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N 333010

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 1-800-248-0278 MARCH 2003

PRINTED U.S.A.

www.globalfire.com.co - PBX: (+571) 898.54.55

FAX 989-846-9231 www.globesprinkler.com BULLETIN GL1160, REV. #2

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

67$1'$5' 5(63216( $8720$7,& 635,1./(56 */ 6(5,(6 ,17(50(',$7( /(9(/ 835,*+7 3(1'(17

'(6&5,37,21 $1' 23(5$7,21

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

ZLWK VSULQNOHU JXDUG SDUW QXPEHU UHG RU FKURPH VHH SDJH %

7KH KHDUW RI *OREH¶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

835,*+7

3(1'(17

7(&+1,&$/ '$7$

6HH UHYHUVH VLGH IRU $SSURYDOV DQG 6SHFLILFDWLRQV 7HPSHUDWXUH 5DWLQJV ) & ) & ) & ) & ) & : DWHU : RUNLQJ 3UHVVXUH 5DWLQJ SVL %DUV )DFWRU\ WHVWHG K\GURVWDWLFDOO\ WR SVL %DUV 0D[LPXP ORZ WHPSHUDWXUH JODVV EXOE UDWLQJ LV ) & )UDPH EURQ]H 'HIOHFWRU EUDVV 6FUHZ EUDVV %XOE VHDW FRSSHU 6SULQJ QLFNHO DOOR\ 6HDO WHIORQ %XOE JODVV ZLWK JO\FHULQ VROXWLRQ PP VL]H 6KLHOG EUDVV RU VWHHO GLDPHWHU

635,1./(5 7(03(5$785( 5$7,1* &/$66,),&$7,21 DQG &2/25 &2',1* &/$66,),&$7,21 25',1$5< ,17(50(',$7( +,*+

$9$,/$%/( 635,1./(5 7(03(5$785(6

) ) & & 25$1*( 5(' ) ) & & <(//2: *5((1 ) & %/8(

$,53$5. '5,9( 67$1',6+ 0,&+,*$1 0$<

1 ) 3 $ 0$;,080 &(,/,1* 7(03(5$785(

%8/% &2/25

) & ) & ) &

www.globalfire.com.co - PBX: (+571) 898.54.55

)$;

%8//(7,1 */ 5(9

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

67$1'$5' 5(63216( $8720$7,& 635,1./(56 */ 6(5,(6 ,17(50(',$7( /(9(/ 835,*+7 3(1'(17 63(&,),&$7,216 120,1$/ . )$&725

7+5($' 6,=(

/(1*7+

),1,6+(6

PHWULF

137

PHWULF

137

PHWULF

137

127( 0(75,& &219(56,216 $5( $3352;,0$7(

)DFWRU\ %URQ]H

27+(5 ),1,6+(6 $9$,/$%/( 21 5(48(67

$33529$/6 67</(

835,*+7

3(1'(17

6,1 02'(/

. )$&725

) &

F8/XV

1<& '2% 0($ (

;

; 137

25'(5,1* ,1)250$7,21

*/2%( 352'8&7 :$55$17<

63(&,)<

4XDQWLW\ 0RGHO 1XPEHU 6W\OH 2ULILFH 7KUHDG 6L]HV 7HPSHUDWXUH )LQLVKHV GHVLUHG 4XDQWLW\ : UHQFKHV 3 1 3 1 / 2

$,53$5. '5,9( 67$1',6+ 0,&+,*$1 )$; ZZZ JOREHVSULQNOHU FRP 0$<

35,17(' 8 6 $ www.globalfire.com.co - PBX: (+571) 898.54.55

%8//(7,1 */ 5(9

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

AUTOMATIC SPRINKLERS GL SERIES 10MM UPRIGHT PENDENT RECESSED PENDENT DESCRIPTION AND OPERATION The Globe GL Series10mm Sprinkler is a low profile yet durable design which utilizes a frangible glass ampule as the thermosensitive element. While the10mm sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard spray sprinklers are specified. This sprinkler series is available in various styles, temperature ratings and finishes to meet varying design requirements. The heart of Globe's GL Series sprinkler-proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands, increasing the internal pressure. At the prescribed temperature, the internal pressure within the ampule exceeds the strength of the glass, causing the glass to shatter. This results in water discharge which is distributed in an approved pattern, depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field.

UPRIGHT

TECHNICAL DATA

PENDENT

See reverse side for Approvals and Specifications. Temperature Ratings - 57°C (135°F), 68°C (155°F), 79°C (175°F), 93°C (200°F), 141°C (286°F), 182°C (360°F) Water Working Pressure Rating - 12 Bars Factory tested hydrostatically to 34 Bars Maximum low temperature glass bulb rating is -55°C (-67°F) Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with glycerin solution, 5mm size

RECESSED PENDENT

SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION ORDINARY INTERMEDIATE HIGH EXTRA HIGH

AVAILABLE SPRINKLER TEMPERATURES 57°C/68°C 79°C/93°C 141°C 182°C

135°F/155°F 175°F/200°F 286°F 360°F

ORANGE/RED YELLOW/GREEN BLUE MAUVE

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 DECEMBER 2009

N.F.P.A. MAXIMUM CEILING TEMPERATURE

BULB COLOR

A-64 www.globalfire.com.co - PBX: (+571) 898.54.55

38°C 66°C 107°C 149°C

989-846-4583

100°F 150°F 225°F 300°F FAX 989-846-9231 BULLETIN GL4252

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

AUTOMATIC SPRINKLERS GL SERIES 10MM UPRIGHT PENDENT RECESSED PENDENT

SPECIFICATIONS

NOMINAL "K" FACTOR

THREAD SIZE

LENGTH

FINISHES Factory Bronze Bright Chrom e

10MM (ISO 7/1-R3/8)

57 METRIC

Satin Chrom e 1 White Polyes ter2 Black Polyes ter1,2 Wax Coated 1,2,3 Lead Coated 1,2

5.7 CM

Wax Over Lead 1,2,3 NOTE: METRIC CONVERSIONS ARE APPROXIMATE.

FINISHES AVAILABLE ON SPECIAL ORDER. AVAILABLE AS cULus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER 3 WAX COATING UL LISTED UP TO 200°F ONLY. 1

APPROVALS STYLE

SIN MODEL

K FACTOR

57°C 135°F

68°C 155°F

79°C 175°F

93°C 200°F

141°C 286°F

182°C 360°F

cULus

UPRIGHT

GL4262

57 METRIC

PENDENT RECESSED PENDENT

GL4252

57 METRIC

CROSS SECTION

ORDERING INFORMATION

58.74mm DIA.

SPECIFY

50.80mm DIA. MIN. HOLE IN CEILING 48.42mm DIA.

Quantity Model Number Style Orifice Thread Sizes Temperature Finishes Desired Quantity - Wrenches - P/N 325390

25.40mm x 10mm REDUCER

CUP

3.18mm MIN. 15.88mm MAX. - 12.70mm ADJ. 22.23mm MAX. - 19.05mm ADJ.

3.18mm RETAINER

25.40mm MIN. 44.45mm MAX.

RECESSED PENDENT

GLOBE® PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty, please refer to Price List Terms and Conditions of Sale (Our Price List).

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 1-800-248-0278 DECEMBER 2009

PRINTED U.S.A. www.globalfire.com.co - PBX: (+571) 898.54.55

FAX 989-846-9231 www.globesprinkler.com BULLETIN GL4252

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

AUTOMATIC SPRINKLERS GL SERIES DRY TYPE PENDENT RECESSED PENDENT

DESCRIPTION AND OPERATION The Globe GL Series Dry Type Pendent Sprinkler is designed for use in special applications such as freezing environments and conditions where sediment or foreign materials might accumulate in ordinary drop nipples. The Globe GL Series Dry Type Pendent Sprinkler utilizes a frangible glass ampule sprinkler. At the ampule's rated temperature, the sprinkler opens releasing the bulb seat, causing the inner tube assembly to move, allowing spring assembly to pivot alongside the inner tube. At this time, water flows through the sprinkler and is distributed by the deflector, in an approved discharge pattern. The heart of Globe's GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern.

SURFACE MOUNT

SLEEVE & SKIRT

TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings: 135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C), 286°F (141°C) Water Working Pressure Rating: 175 psi (12 Bars) Factory tested hydrostatically to 500 psi (34 Bars) Maximum low temperature glass bulb rating: -67°F (-55°C) Frame - bronze Deflector - brass Screw - brass Bulb seat - brass Spring - teflon coated nickel alloy Retainer - brass Pin - stainless steel Torsion spring - stainless steel Bulb - glass with glycerin solution, 5mm Orifice insert - brass 3/4" or 1" NPT Outer tube - galvanized steel pipe Inner tube - stainless steel

EXTENDED

RECESSED

SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLAS S IFICATION ORDINA RY INTE RM E DIA TE HIGH

AV AILABLE S P RINKLER TEM P ERATURES 135°F/155°F 175°F/200°F 286°F

BULB COLOR

57°C/68°C 79°C/93°C 141°C

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 AUGUST 2010

ORA NGE /RE D Y E LLOW /GRE E N B LUE

N.F.P .A. M AX IM UM CEILING TEM P ERATURE 100°F 150°F 225°F

989-846-4583

A-90 www.globalfire.com.co - PBX: (+571) 898.54.55

38°C 66°C 107°C

FAX 989-846-9231

BULLETIN GL5679, REV. #11

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

AUTOMATIC SPRINKLERS GL SERIES DRY TYPE PENDENT - RECESSED PENDENT SPECIFICATIONS NOMINAL "K" FACTOR

(80 m etric)

5.6

THREAD SIZE

LENGTH

FINISHES

3/4" or 1" N PT

cULus Variable to 48"

Factory Bronze Bright C hrom e Satin C hrom e 1 White Polyes ter2 Black Polyes ter1,2

8.1

(116 m etric)

FM Variable to 36"

1" NPT

Lead C oated 1,2 Wax Coated 1,2,3 Wax Over Lead 1,2,3

NOTE: METRIC CONVERSIONS ARE APPROXIMATE.

FINISHES AVAILABLE ON SPECIAL ORDER. AVAILABLE AS cULus LISTED CORROSION RESISTANT - WHEN SPECIFIED ON ORDER. 3 WAX COATING cULus LISTED UP TO 200°F ONLY. 1 2

APPROVALS S TYLE

PEN D EN T

R EC ESSED PEN D EN T

THREAD S IZE

1 3 5°F 5 7 °C

1 5 5 °F 6 8°C

1 7 5 °F 7 9 °C

2 0 0°F 9 3 °C

2 8 6 °F 14 1°C

FM *

K FACTO R

GL5679

5 .6

1" NPT

GL5680

5 .6

3 /4 " N P T

GL8179

8 .1

1" NPT

GL5679

5 .6

1" NPT

GL5680

5 .6

3 /4 " N P T

GL8179

8 .1

1" NPT

NOTE: LISTED FOR ALL HAZARDS * DRY PENDENT - FM APPROVED 155°F, 200°F, AND 286° ONLY. * DRY RECESSED PENDENT - FM APPROVED 155°F AND 200°F ONLY.

CROSS SECTIONS

NYC - DO B M EA 1 0 1 -9 2 -E

c ULus

S IN M O DEL

IMPORTANT INSTALLATION DATA

Globe GL Series Dry Pendent sprinklers should be installed in accordance with the requirements set forth in NFPA 13. These sprinklers are to be installed using a pipe wrench applied to the outer tube. When this is not possible, the proper sprinkler head wrench may be used with extreme care for lengths up to approximately 18". Excessive force may distort the frame thus destroying the unit. When installed in a wet system extending into a freezing area see chart on Dry Caution sheet for minimum exposed barrel length to prevent ice plugs. Please refer to our Dry Caution sheet for further important installation data.

ORDERING INFORMATION EXTENDED PENDENT

PENDENT

SPECIFY

Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N 333010 Quantity - Recessed Wrenches - P/N 337014 Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed) Escutcheons desired "A" Dimension - Distance from face of fitting to the finished ceiling line regardless of escutcheon used.

GLOBE® PRODUCT WARRANTY RECESSED PENDENT

SLEEVE & SKIRT PENDENT

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 FAX 989-846-9231 989-846-4583 www.globesprinkler.com 1-800-248-0278 AUGUST 2010

PRINTED U.S.A.

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN GL5679, REV. #11

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

Sprinkler Discharge Tables & Spray Patterns

4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 800-846-9211 www.globesprinkler.com AUGUST 2005

A-100 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

INDEX

DISCHARGE TABLES

PAGES 2 - 4

STANDARD UPRIGHT AND PENDENT SPRINKLERS

PAGE 5

(USE THESE CURVES FOR RACK SPRINKLERS ALSO)

FLUSH PENDENT SPRINKLER

PAGE 6

CONVENTIONAL (OLD STYLE) UPRT. & PEND. SPR.

PAGE 7

RECESSED AND CONCEALED PENDENT SPRINKLERS

PAGE 8

STANDARD SIDEWALL SPRINKLERS

PAGE 9

DRY TYPE UPRIGHT AND PENDENT

PAGE 10

DRY TYPE SIDEWALL SPRINKLERS

PAGE 11

EXT. COV. LIGHT HAZARD PENDENT SPR.

PAGE 12

EXTENDED COVERAGE HZ. SDWL.

PAGES 13-18

231 / 13 ELO SPRINKLER

PAGE 19

** NUMBERS IN CIRCLES REPRESENT PRESSURE IN P.S.I. (example:

AUGUST 2005

Page1

www.globalfire.com.co - PBX: (+571) 898.54.55

)

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DISCHARGE TABLES 3/8" (10 mm) Orifice - K = 2.8 (39 metric) PSI 1 2

Kg/cm² .1 .1

GPM 2.80 3.96

l/min. 10.6 15.0

PSI 26 27

Kg/cm² 1.8 1.9

GPM 14.28 14.55

l/min. 54.1 55.1

PSI 51 52

Kg/cm² 3.6 3.7

GPM 20.00 20.19

l/min. 75.7 76.4

PSI 76 77

Kg/cm² 5.3 5.4

GPM 24.41 24.57

l/min. 92.4 93.0

3 4 5

.2 .3 .4

4.85 5.60 6.26

18.4 21.2 23.7

28 29 30

2.0 2.0 2.1

14.82 15.08 15.34

56.1 57.1 58.1

53 54 55

3.7 3.8 3.9

20.38 20.58 20.77

77.1 77.9 78.6

78 79 80

5.5 5.6 5.6

24.73 24.89 25.04

93.6 94.2 94.8

6 7 8 9

.4 .5 .6 .6

6.86 7.41 7.92 8.40

26.0 28.0 30.0 31.8

31 32 33 34

2.2 2.2 2.3 2.4

15.59 15.84 16.08 16.33

59.0 60.0 60.9 61.8

56 57 58 59

3.9 4.0 4.1 4.1

20.95 21.14 21.32 21.51

79.3 80.0 80.7 81.4

81 82 83 84

5.7 5.8 5.8 5.9

25.20 25.36 25.51 25.66

95.4 96.0 96.6 97.1

10 11 12 13

.7 .8 .8 .9

8.85 9.29 9.70 10.10

33.5 35.2 36.7 38.2

35 36 37 38

2.5 2.5 2.6 2.7

16.57 16.80 17.03 17.26

62.7 63.6 64.5 65.3

60 61 62 63

4.2 4.3 4.4 4.4

21.69 21.87 22.05 22.22

82.1 82.8 83.5 84.1

85 86 87 88

6.0 6.0 6.1 6.2

25.81 25.97 26.12 26.27

97.7 98.3 98.9 99.4

14 15 16

1.0 1.1 1.1

10.48 10.84 11.20

39.7 41.0 42.4

39 40 41

2.7 2.8 2.9

17.49 17.71 17.93

66.2 67.0 67.9

64 65 66

4.5 4.6 4.6

22.40 22.57 22.75

84.8 85.4 86.1

89 90 91

6.3 6.3 6.4

26.42 26.56 26.71

100.0 100.5 101.1

17 18 19 20

1.2 1.3 1.3 1.4

11.54 11.88 12.20 12.52

43.7 45.0 46.2 47.4

42 43 44 45

3.0 3.0 3.1 3.2

18.15 18.36 18.57 18.78

68.7 69.5 70.3 71.1

67 68 69 70

4.7 4.8 4.9 4.9

22.92 23.09 23.26 23.43

86.8 87.4 88.0 88.7

92 93 94 95

6.5 6.5 6.6 6.7

26.86 27.00 27.15 27.29

101.7 102.2 102.8 103.3

21 22 23

1.5 1.6 1.6

12.83 13.13 13.43

48.6 49.7 50.8

46 47 48

3.2 3.3 3.4

18.99 19.20 19.40

71.9 72.7 73.4

71 72 73

5.0 5.1 5.1

23.59 23.76 23.92

89.3 89.9 90.5

96 97 98

6.7 6.8 6.9

27.43 27.58 27.72

103.8 104.4 104.9

24 25

1.7 1.8

13.72 14.00

51.9 53.0

49 50

3.4 3.5

19.60 19.80

74.2 75.0

74 75

5.2 5.3

24.09 24.25

91.2 91.8

99 100

7.0 7.0

27.86 28.00

105.5 106.0

Kg/cm² 5.3 5.4 5.5 5.6 5.6 5.7 5.8 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.3 6.4 6.5 6.5 6.6 6.7 6.7 6.8 6.9 7.0 7.0

GPM 36.61 36.85 37.09 37.33 37.57 37.80 38.03 38.26 38.49 38.72 38.95 39.17 39.40 39.62 39.84 40.07 40.28 40.50 40.72 40.94 41.15 41.37 41.58 41.79 42.00

l/min. 138.6 139.5 140.4 141.3 142.2 143.1 144.0 144.8 145.7 146.6 147.4 148.3 149.1 150.0 150.8 151.7 152.5 153.3 154.1 155.0 155.8 156.6 157.4 158.2 159.0

7/16" (11 mm) Orifice - K = 4.2 (59 metric) PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Kg/cm² .1 .1 .2 .3 .4 .4 .5 .6 .6 .7 .8 .8 .9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.6 1.7 1.8

AUGUST 2005

GPM 4.20 5.94 7.27 8.40 9.39 10.29 11.11 11.88 12.60 13.28 13.93 14.55 15.14 15.71 16.27 16.80 17.32 17.82 18.31 18.78 19.25 19.70 20.14 20.58 21.00

l/min. 15.9 22.5 27.5 31.8 35.5 39.0 42.1 45.0 47.7 50.3 52.7 55.1 57.3 59.5 61.6 63.6 65.6 67.5 69.3 71.1 72.9 74.6 76.2 77.9 79.5

PSI 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Kg/cm² 1.8 1.9 2.0 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.7 2.8 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.4 3.5

GPM 21.42 21.82 22.22 22.62 23.00 23.38 23.76 24.13 24.49 24.85 25.20 25.55 25.89 26.23 26.56 26.89 27.22 27.54 27.86 28.17 28.49 28.79 29.10 29.40 29.70

l/min. PSI 81.1 51 82.6 52 84.1 53 85.6 54 87.1 55 88.5 56 89.9 57 91.3 58 92.7 59 94.1 60 95.4 61 96.7 62 98.0 63 99.3 64 100.5 65 101.8 66 103.0 67 104.3 68 105.5 69 106.6 70 107.8 71 109.0 72 110.2 73 111.3 74 112.4 75

Page2

Kg/cm² 3.6 3.7 3.7 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.4 4.5 4.6 4.6 4.7 4.8 4.9 4.9 5.0 5.1 5.1 5.2 5.3

GPM 29.99 30.29 30.58 30.86 31.15 31.43 31.71 31.99 32.26 32.53 32.80 33.07 33.34 33.60 33.86 34.12 34.38 34.63 34.89 35.14 35.39 35.64 35.88 36.13 36.37

www.globalfire.com.co - PBX: (+571) 898.54.55

l/min. PSI 113.5 76 114.7 77 115.8 78 116.8 79 117.9 80 119.0 81 120.0 82 121.1 83 122.1 84 123.1 85 124.2 86 125.2 87 126.2 88 127.2 89 128.2 90 129.2 91 130.1 92 131.1 93 132.1 94 133.0 95 134.0 96 134.9 97 135.8 98 136.8 99 137.7 100

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DISCHARGE TABLES 1/2" (13 mm) Orifice - K = 5.6 (80 metric) PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Kg/cm² .1 .1 .2 .3 .4 .4 .5 .6 .6 .7 .8 .8 .9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.6 1.7 1.8

GPM 5.60 7.92 9.70 11.20 12.52 13.72 14.82 15.84 16.80 17.71 18.57 19.40 20.19 20.95 21.69 22.40 23.09 23.76 24.41 25.04 25.66 26.27 26.86 27.43 28.00

l/min. PSI 21.2 26 30.0 27 36.7 28 42.4 29 47.4 30 51.9 31 56.1 32 60.0 33 63.6 34 67.0 35 70.3 36 73.4 37 76.4 38 79.3 39 82.1 40 84.8 41 87.4 42 89.9 43 92.4 44 94.8 45 97.1 46 99.4 47 101.7 48 103.8 49 106.0 50

Kg/cm² 1.8 1.9 2.0 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.7 2.8 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.4 3.5

GPM 28.55 29.10 29.63 30.16 30.67 31.18 31.68 32.17 32.65 33.13 33.60 34.06 34.52 34.97 35.42 35.86 36.29 36.72 37.15 37.57 37.98 38.39 38.80 39.20 39.60

l/min. PSI 108.1 51 110.2 52 112.2 53 114.2 54 116.1 55 118.0 56 119.9 57 121.8 58 123.6 59 125.4 60 127.2 61 128.9 62 130.7 63 132.4 64 134.1 65 135.7 66 137.4 67 139.0 68 140.6 69 142.2 70 143.8 71 145.3 72 146.9 73 148.4 74 149.9 75

Kg/cm² 3.6 3.7 3.7 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.4 4.5 4.6 4.6 4.7 4.8 4.9 4.9 5.0 5.1 5.1 5.2 5.3

GPM 39.99 40.39 40.77 41.15 41.53 41.91 42.28 42.65 43.01 43.38 43.74 44.09 44.45 44.80 45.15 45.49 45.84 46.18 46.52 46.85 47.19 47.52 47.85 48.17 48.50

l/min. 151.4 152.9 154.3 155.8 157.2 158.6 160.0 161.4 162.8 164.2 165.6 166.9 168.3 169.6 170.9 172.2 173.5 174.8 176.1 177.3 178.6 179.9 181.1 182.3 183.6

PSI 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Kg/cm² 5.3 5.4 5.5 5.6 5.6 5.7 5.8 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.3 6.4 6.5 6.5 6.6 6.7 6.7 6.8 6.9 7.0 7.0

GPM 48.82 49.14 49.46 49.77 50.09 50.40 50.71 51.02 51.32 51.63 51.93 52.23 52.53 52.83 53.13 53.42 53.71 54.00 54.29 54.58 54.87 55.15 55.44 55.72 56.00

l/min. 184.8 186.0 187.2 188.4 189.6 190.8 192.0 193.1 194.3 195.4 196.6 197.7 198.8 200.0 201.1 202.2 203.3 204.4 205.5 206.6 207.7 208.8 209.9 210.9 212.0

Kg/cm² 5.3 5.4 5.5 5.6 5.6 5.7 5.8 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.3 6.4 6.5 6.5 6.6 6.7 6.7 6.8 6.9 7.0 7.0

GPM 70.61 71.08 71.54 71.99 72.45 72.90 73.35 73.79 74.24 74.68 75.12 75.55 75.98 76.42 76.84 77.27 77.69 78.11 78.53 78.95 79.36 79.78 80.19 80.59 81.00

l/min. 267.3 269.1 270.8 272.5 274.3 276.0 277.7 279.3 281.0 282.7 284.4 286.0 287.6 289.3 290.9 292.5 294.1 295.7 297.3 298.9 300.4 302.0 303.6 305.1 306.6

17/32" (14 mm) Orifice - K = 8.1 (116 metric) PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Kg/cm² .1 .1 .2 .3 .4 .4 .5 .6 .6 .7 .8 .8 .9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.6 1.7 1.8

AUGUST 2005

GPM 8.10 11.46 14.03 16.20 18.11 19.84 21.43 22.91 24.30 25.61 26.86 28.06 29.20 30.31 31.37 32.40 33.40 34.37 35.31 36.22 37.12 37.99 38.85 39.68 40.50

l/min. PSI 30.7 26 43.4 27 53.1 28 61.3 29 68.6 30 75.1 31 81.1 32 86.7 33 92.0 34 96.9 35 101.7 36 106.2 37 110.5 38 114.7 39 118.7 40 122.6 41 126.4 42 130.1 43 133.7 44 137.1 45 140.5 46 143.8 47 147.1 48 150.2 49 153.3 50

Kg/cm² 1.8 1.9 2.0 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.7 2.8 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.4 3.5

GPM 41.30 42.09 42.86 43.62 44.37 45.10 45.82 46.53 47.23 47.92 48.60 49.27 49.93 50.58 51.23 51.87 52.49 53.12 53.73 54.34 54.94 55.53 56.12 56.70 57.28

l/min. PSI 156.3 51 159.3 52 162.2 53 165.1 54 168.0 55 170.7 56 173.4 57 176.1 58 178.8 59 181.4 60 184.0 61 186.5 62 189.0 63 191.5 64 193.9 65 196.3 66 198.7 67 201.1 68 203.4 69 205.7 70 208.0 71 210.2 72 212.4 73 214.6 74 216.8 75

Page3

Kg/cm² 3.6 3.7 3.7 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.4 4.5 4.6 4.6 4.7 4.8 4.9 4.9 5.0 5.1 5.1 5.2 5.3

GPM 57.85 58.41 58.97 59.52 60.07 60.61 61.15 61.69 62.22 62.74 63.26 63.78 64.29 64.80 65.30 65.80 66.30 66.79 67.28 67.77 68.25 68.73 69.21 69.68 70.15

www.globalfire.com.co - PBX: (+571) 898.54.55

l/min. PSI 219.0 76 221.1 77 223.2 78 225.3 79 227.4 80 229.4 81 231.5 82 233.5 83 235.5 84 237.5 85 239.5 86 241.4 87 243.3 88 245.3 89 247.2 90 249.1 91 251.0 92 252.8 93 254.7 94 256.5 95 258.3 96 260.1 97 262.0 98 263.8 99 265.5 100

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DISCHARGE TABLES 5/8" Orifice (16 mm) - K = 11.5 (164 metric) PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Kg/cm² .1 .1 .2 .3 .4 .4 .5 .6 .6 .7 .8 .8 .9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.6 1.7 1.8

GPM 11.50 16.26 19.92 23.00 25.71 28.17 30.43 32.53 34.50 36.37 38.14 39.84 41.46 43.03 44.54 46.00 47.42 48.79 50.13 51.43 52.70 53.94 55.15 56.34 57.50

l/min. PSI 43.5 26 61.6 27 75.4 28 87.1 29 97.3 30 106.6 31 115.2 32 123.1 33 130.6 34 138.1 35 144.4 36 150.8 37 156.9 38 162.9 39 168.6 40 174.1 41 179.5 42 184.7 43 189.8 44 194.7 45 199.5 46 204.2 47 208.8 48 213.3 49 217.7 50

Kg/cm² 1.8 1.9 2.0 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.7 2.8 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.4 3.5

GPM 58.64 59.76 60.85 61.93 62.99 64.03 65.05 66.06 67.06 68.03 69.00 69.95 70.89 71.82 72.73 73.64 74.53 75.41 76.28 77.14 78.00 78.84 79.67 80.50 81.32

l/min. PSI 222.0 51 226.2 52 230.3 53 234.4 54 238.4 55 242.4 56 246.2 57 250.1 58 253.8 59 257.5 60 261.2 61 264.8 62 268.3 63 271.9 64 275.3 65 278.8 66 282.1 67 285.5 68 288.8 69 292.0 70 295.3 71 298.4 72 301.6 73 304.7 74 307.8 75

Kg/cm² 3.6 3.7 3.7 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.4 4.5 4.6 4.6 4.7 4.8 4.9 4.9 5.0 5.1 5.1 5.2 5.3

GPM 82.13 82.93 83.72 84.51 85.29 86.06 86.82 87.58 88.33 89.08 89.82 90.55 91.28 92.00 92.72 93.43 94.13 94.83 95.53 96.22 96.90 97.58 98.26 98.93 99.59

l/min. PSI 310.9 76 313.9 77 316.9 78 319.9 79 322.9 80 325.8 81 328.6 82 331.5 83 334.4 84 337.2 85 340.0 86 342.8 87 345.5 88 348.3 89 351.0 90 353.7 91 356.3 92 359.0 93 361.6 94 364.2 95 366.8 96 369.4 97 372.0 98 374.5 99 377.0 100

l/min. 5.3 5.4 5.5 5.6 5.6 5.7 5.8 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.3 6.4 6.5 6.5 6.6 6.7 6.7 6.8 6.9 7.0 7.0

GPM 100.25 100.91 101.57 102.21 102.86 103.50 104.14 104.77 105.40 106.02 106.65 107.26 107.88 108.49 109.10 109.70 110.30 110.90 111.50 112.09 112.68 113.26 113.84 114.42 115.00

l/min. 379.5 382.0 384.5 386.9 389.4 391.8 394.2 396.6 399.0 401.3 403.7 406.0 408.4 410.7 413.0 415.2 417.5 419.8 422.1 424.3 426.5 428.7 430.9 433.1 435.3

Kg/cm² 5.3 5.4 5.5 5.6 5.6 5.7 5.8 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.3 6.4 6.5 6.5 6.6 6.7 6.7 6.8 6.9 7.0 7.0

GPM 124.66 125.48 126.29 127.10 127.90 128.70 129.49 130.28 131.06 131.84 132.61 133.38 134.15 134.91 135.66 136.41 137.16 137.90 138.64 139.38 140.11 140.84 141.56 142.28 143.00

l/min. 471.9 475.0 478.1 481.1 484.2 487.2 490.2 493.2 496.1 499.1 502.0 504.9 507.8 510.7 513.5 516.3 519.2 522.0 524.8 527.6 530.4 533.1 535.9 538.6 541.3

3/4" Orifice (19 mm) - K = 14.3 (205 metric) PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Kg/cm² .1 .1 .2 .3 .4 .4 .5 .6 .6 .7 .8 .8 .9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.6 1.7 1.8

AUGUST 2005

GPM 14.30 20.22 24.77 28.60 31.98 35.03 37.83 40.45 42.90 45.22 47.43 49.54 51.56 53.51 55.38 57.20 58.96 60.67 62.33 63.95 65.53 67.07 68.58 70.06 71.50

l/min. PSI 54.1 26 76.5 27 93.8 28 108.3 29 121.1 30 132.6 31 143.2 32 153.1 33 162.4 34 171.2 35 179.5 36 187.5 37 195.2 38 202.6 39 209.6 40 216.5 41 223.2 42 229.7 43 235.9 44 242.1 45 248.1 46 253.9 47 259.6 48 265.2 49 270.7 50

Kg/cm² 1.8 1.9 2.0 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.7 2.8 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.4 3.5

GPM 72.92 74.30 75.67 77.01 78.32 79.62 80.89 82.15 83.38 84.60 85.80 86.98 88.15 89.30 90.44 91.56 92.67 93.77 94.86 95.93 96.99 98.04 99.07 100.10 101.12

l/min. PSI 276.0 51 281.3 52 286.4 53 291.5 54 296.5 55 301.4 56 306.2 57 311.0 58 315.6 59 320.2 60 324.8 61 329.3 62 333.7 63 338.0 64 342.4 65 346.6 66 350.8 67 355.0 68 359.1 69 363.1 70 367.1 71 371.1 72 375.0 73 378.9 74 382.8 75

Page4

Kg/cm² 3.6 3.7 3.7 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.4 4.5 4.6 4.6 4.7 4.8 4.9 4.9 5.0 5.1 5.1 5.2 5.3

GPM 102.12 103.12 104.11 105.08 106.05 107.01 107.96 108.91 109.84 110.77 111.69 112.60 113.50 114.40 115.29 116.17 117.05 117.92 118.78 119.64 120.49 121.34 122.18 123.01 123.84

www.globalfire.com.co - PBX: (+571) 898.54.55

l/min. PSI 386.6 76 390.4 77 394.1 78 397.8 79 401.4 80 405.1 81 408.6 82 412.3 83 415.8 84 419.3 85 422.8 86 426.2 87 429.6 88 433.1 89 436.4 90 439.8 91 443.1 92 446.4 93 449.6 94 452.9 95 456.1 96 459.3 97 462.5 98 465.6 99 468.8 100

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES SPRINKLERS

PENDENT and RECESSED PENDENT

UPRIGHT

3/8" Orifice - K = 2.8

7/16" Orifice - K = 4.2

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1 or 7.8 AUGUST 2005

Page5

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES SPRINKLERS FLUSH PENDENT STYLE AND CONCEALED PENDENT STYLE

GL5650 - Flush Millennium GL5609 - Concealed Millennium 1/2" Orifice - K = 5.6

AUGUST 2005

Page6

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES SPRINKLERS CONVENTIONAL UPRIGHT

PENDENT

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1

AUGUST 2005

Page7

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES SPRINKLERS ADJUSTABLE CONCEALED PENDENT

CONCEALED PENDENT

3/8" Orifice - K = 2.8

7/16" Orifice - K = 4.2

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1 AUGUST 2005

Page8

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES SIDEWALL AND RECESSED SIDEWALL SPRINKLERS VERTICAL *

HORIZONTAL

3/8" Orifice - K = 2.8

7/16" Orifice - K = 4.2

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1 or 7.8 * Vertical Sidewall in Upright and Pendent styles. AUGUST 2005

Page9

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES DRY TYPE SPRINKLERS

PENDENT, RECESSED PENDENT and CONCEALED PENDENT

UPRIGHT

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1

AUGUST 2005

Page10

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES DRY TYPE SPRINKLERS VERTICAL *

HORIZONTAL

1/2" Orifice - K = 5.6

17/32" Orifice - K = 8.1

* Vertical Sidewall in Upright and Pendent styles.

AUGUST 2005

Page11

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE PENDENT, RECESSED PENDENT AND CONCEALED PENDENT SPRINKLERS 17/32" ORIFICE - K = 8.1

16' x 16' ROOM SIZE 10.3 P.S.I. - 26 G.P.M.

18' x 18' ROOM SIZE 16.6 P.S.I. - 33 G.P.M.

20' x 20' ROOM SIZE 24.4 P.S.I. - 40 G.P.M. AUGUST 2005

Page12

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL AND RECESSED EXTENDED COVERAGE HORIZONTAL SIDEWALL SPRINKLERS 4" - 12" DEFLECTOR DISTANCE FROM CEILING 1/2" ORIFICE - K = 5.6

21.6 P.S.I. - 26 G.P.M. 16' x 16' (HALF PATTERN)

26.8 P.S.I. - 29 G.P.M. 16' x 18' (HALF PATTERN)

32.7 P.S.I. - 32 G.P.M. 16' x 20' (HALF PATTERN)

32.7 P.S.I. - 32 G.P.M. 18' x 18' (HALF PATTERN) AUGUST 2005

Page13

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL AND RECESSED EXTENDED COVERAGE HORIZONTAL SIDEWALL SPRINKLERS 4" - 6" DEFLECTOR DISTANCE FROM CEILING 17/32" ORIFICE - K = 8.1

12.8 P.S.I. - 29 G.P.M. 16' x 18' (HALF PATTERN)

10.3 P.S.I. - 26 G.P.M. 16' x 16' (HALF PATTERN)

20.9 P.S.I. - 37 G.P.M. 16' x 22' (HALF PATTERN)

16.6 P.S.I. - 33 G.P.M. 16' x 20' (HALF PATTERN)

26.9 P.S.I. - 42 G.P.M. 16' x 24' (HALF PATTERN)

AUGUST 2005

Page14

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL AND RECESSED EXTENDED COVERAGE HORIZONTAL SIDEWALL SPRINKLERS 6" - 12" DEFLECTOR DISTANCE FROM CEILING 17/32" ORIFICE - K = 8.1

10.3 P.S.I. - 26 G.P.M. 16' x 16' (HALF PATTERN)

12.8 P.S.I. - 29 G.P.M. 16' x 18' (HALF PATTERN)

16.6 P.S.I. - 33 G.P.M. 16' x 20' (HALF PATTERN)

20.9 P.S.I. - 37 G.P.M. 16' x 22' (HALF PATTERN)

26.9 P.S.I. - 42 G.P.M. 16' x 24' (HALF PATTERN) AUGUST 2005

Page15

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL AND RECESSED EXTENDED COVERAGE HORIZONTAL SIDEWALL SPRINKLERS 12" - 18" DEFLECTOR DISTANCE FROM CEILING 17/32" ORIFICE - K = 8.1

AUGUST 2005

11.9 P.S.I. - 28 G.P.M. 16' x 16' (HALF PATTERN)

14.6 P.S.I. - 31 G.P.M. 16' x 18' (HALF PATTERN)

18.7 P.S.I. - 35 G.P.M. 16' x 20' (HALF PATTERN)

20.9 P.S.I. - 37 G.P.M. 16' x 22' (HALF PATTERN)

Page16

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS MODEL GL8114 SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL CONCEALED SPRINKLERS 4" - 12" DEFLECTOR DISTANCE FROM CEILING

17/32" ORIFICE - 8.1 K

4"-6" 6"-12"

4" 12"

24.4 P.S.I. - 40 G.P.M. 18'x 22' (HALF PATTERN)

16'x 22' (HALF PATTERN) Flows for: 4' & 6" - 19.8 P.S.I. - 36 G.P.M. 6" - 12" - 24.4 P.S.I. - 40 G.P.M.

4" 12"

19.8 P.S.I - 36 G.P.M 18' x 20' (HALF PATTERN)

23.2 P.S.I. - 39 G.P.M. 16' x 24' (HALF PATTERN)

AUGUST 2005

Page17

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES EXTENDED COVERAGE HORIZONTAL SIDEWALL CONCEALED SPRINKLERS 4"-6" DEFLECTOR DISTANCE FROM CEILING

1/2" ORIFICE - 5.6K

17/32" ORIFICE - 8.1K

10.3 P.S.I. - 26 G.P.M. 16' x 16' (HALF PATTERN)

26.8 P.S.I. - 29 G.P.M. 16' x 16' (HALF PATTERN)

12.8 P.S.I. - 29 G.P.M. 16' x 18' (HALF PATTERN)

26.8 P.S.I. - 29 G.P.M. 16' x 18' (HALF PATTERN)

15.6 P.S.I. - 32 G.P.M. 16' x 20' (HALF PATTERN)

32.7 P.S.I. - 32 G.P.M. 16' x 20' (HALF PATTERN)

AUGUST 2005

Page18

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE SPRINKLER SPRAY PATTERNS GL SERIES 231/13 SPRINKLERS 5/8" ORIFICE - K = 11.5

231 UPRIGHT

13 PENDENT

AUGUST 2005

Page19

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN SDSP, REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

RESIDENTIAL SPRINKLER INSTALLATION GUIDE 4077 AIR PARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 800-846-9211 www.globesprinkler.com July 2013

A-15 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE DESCR., WARNING AND IMPORTANT NOTES

1-2

GL SERIES RESIDENTIAL SPR. DESIGN GUIDE

3-4

DISCHARGE TABLES

PENDENT WALL WETTING

6-11

CONCEALED PENDENT WALL WETTING

12-15

FLUSH PENDENT WALL WETTING

HORIZONTAL SIDEWALL WALL WETTING

17-22

INSTALLATION DIAGRAMS

23-28

INSTALLATION NEAR HEAT SOURCES

29-30

July 2013

Page i www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE GENERAL DESCRIPTION Globe Fire Sprinkler Corporation Model GL pendent and horizontal sidewall residential sprinklers are Listed by Underwriters Laboratories Inc. for use in wet pipe sprinkler systems conforming to the design/usage requirements of NFPA 13, NFPA 13D and NFPA 13R. These sprinklers have been specially designed to conform to these standards as a minimum and additionally to the Underwriters Laboratories Inc. Standard for Residential Sprinklers for Fire Protection Service, UL 1626. They are also approved for use by the New York City Department of Buildings. Because residential sprinklers are significantly faster in operation (fast response) than ordinary sprinklers, it is extremely important that they be used in accordance with their U.L. listing, the appropriate NFPA standards and the criteria set forth herein by Globe.

WARNINGS 1. Installation of Globe GL Series Residential Sprinklers shall conform to the installation requirements of NFPA 13, 13D or 13R. Other requirements may be stipulated by local codes or authority having jurisdiction. 2. The contractor is responsible to give the owner of the system , or his representative, a copy of this guide. Further, the owner should give a copy of this guide to a succeeding owner. 3. The owner is responsible for maintaining the system in proper working order. 4. Residential automatic sprinkler systems should be maintained and inspected in accordance with NFPA 13, 13D, 13R and 25 specifications. Professional maintenance is recommended. 5. Any questions regarding the installation of Globe GL Series Residential Sprinklers not answered in this guide may be directed to the Globe Fire Sprinkler Corporation and/or the National Fire Protection Association, as well as the authority having jurisdiction. 6. Unless specifically noted the specifications in this guide shall not take presedence over the requirements noted in item 1. 7. Areas such as hallways, stairwells, landings, dinettes and rooms must be separated by beams, lintels or soffits that are 8 or more inches in depth to be considered single compartments. 8. Only use the minimum number of sprinklers necessary for each compartment. Do NOT use more sprinklers than required per compartment. 9. Use only a maximum torque of 25 ft. lbs. to install Globe GL Series Residential Sprinklers. Use of higher torque levels may distort the seating area the sprinkler, resulting in leakage. 10. Do not hang anything from the sprinklers. 11. Do not put curtains, drapes or valences around sprinklers. 12. Do not use soap and water, detergents, cleaning agents, ammonia or other chemicals to clean sprinklers. To remove dust, cobwebs, lint, etc., carefully use a feather duster or vacuum with a soft brush attachment.

IMPORTANT NOTES 1. Residential Fire Sprinkler Systems should only be designed and installed by competent professionals having full knowledge of the special design/usage requirements involved. Any changes necessary to an existing approved system should only be performed by such competent professional individuals. 2. Should the original water supply used to design the approved installed system change, it is most important that its effect on the sprinkler system be reviewed by competent professionals familiar with these special fire protection systems. 3. More information concerning Globe's GL Series Residential Sprinklers may be obtained upon request to the Globe "Customer Service Department" at the address contained in this document.

July 2013

Page 1 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE NFPA 13 REQUIREMENTS: When sprinklers are used in NFPA 13 Systems, A 0.1 Design Density minumum shall be utilized.

NFPA 13D REQUIREMENTS: For each of the following situations, the number of sprinklers in the design area shall be all of the sprinklers within a compartment, up to a maximum of two sprinklers, that require the greatest hydraulic demand. (1). A flat smooth, horizontal ceiling with no beams up to a maximum of 24 ft. above the floor. (2). A flat, horizontal beamed ceiling with a maximum ceiling height of 24 ft., with beams up to 14in. deep with pendent sprinklers under the beams. The compartment containing the beamed ceiling shall be a maximum of 600 ft2 in area. The highest sprinkler in the compartment shall be above all openings from the compartment into any communicating spaces. (3). A smooth flat sloped ceiling with no beams up to a maximum slope of 8 in 12. The highest portion of the ceiling shall not be more than 24 ft. above the floor. The highest sprinkler in the sloped portion of the ceiling shall be above all openings from the compartment containing the sloped ceiling into any communicating spaces. (4). A sloped ceiling with beams up to 14 in. deep with pendent sprinklers under the beams. The compartment containing the sloped beamed ceiling shall be a maximum of 600 ft2 in area. The slope of the ceiling shall be between 2 in 12 and 8 in 12. The highest portion of the ceiling shall not be more than 24 ft. above the floor. The highest sprinkler in the sloped portion of the ceiling shall be above all openings from the compartment containing the sloped ceiling into any communicating spaces. (5). A sloped ceiling with beams of any depth with sidewall or pendent sprinklers in each pocket formed by the beams. The compartment containing the sloped, beamed ceiling shall be a maximum of 600 ft2 in area. The slope of the ceiling shall be between 2 in 12 and 8 in 12. The highest portion of the ceiling shall not be more than 24 ft. above the floor. For situations not meeting one of the conditions above, residential sprinklers listed for use in specific ceiling configurations shall be permitted to be used in accordance with their listings. For situations not meeting one of the conditions above, the number of sprinklers in the design area shall be determined in consultation with the authority having jurisdiction as appropriate for the conditions. Sprinklers shall be installed in accordance with their listing where a type of ceiling configuration is referenced in the listing.

NFPA 13R REQUIREMENTS: Horizontal Ceiling criteria may be used for sloped ceiling configurations up to 8:12 pitch when acceptable to the Local Authority having Jurisdiction. The following pages contain illustrations for customers reference. If conflicting data is found, NFPA 13, 13D, or 13R requirements take presedence.

July 2013

Page 2 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE GL SERIES RESIDENTIAL SPRINKLER DESIGN GUIDE STYLE

PENDENT & RECESSED

ADJUSTABLE CONCEALED PENDENT

ONE INCH ADJUSTABLE CONCEALED PENDENT

HORIZONTAL SIDEWALL & RECESSED

PENDENT & RECESSED

FLUSH PENDENT

SIN MODEL

K FACTOR

TEMP. 째F

GL4110

4.1

155, 175

GL4910

GL4147

GL4947

GL4906

GL4231

GL4431

GL5610

GL3010

GL4248

4.9

COVERAGE FT x FT

MINIMUM FLOW GPM *

MINIMUM PRESSURE PSI *

12 x 12

7.2

14 x 14

8.6

16 x 16

11.7

12 x 12

14 x 14

8.2

16 x 16

8.2

18 x 18

13.5

20 x 20

16.7

12 x 12

7.2

14 x 14

13.4

16 x 16

13.4

12 x 12

7.7

14 x 14

8.2

16 x 16

8.2

155, 175

4.1

155

4.9

155

4.9

155

4.2

155, 175

4.4

155, 175

5.6

155

4.1

155

18 x 18

20 x 20

16.7

12 x 12

14 x 14

16 x 16

18 x 18

20 x 20

16.7

12 x 12

9.6

14 x 14

12.8

16 x 16

14.5

16 x 18

20.5

16 x 20

12 x 12

8.7

14 x 14

11.6

16 x 16

13.2

16 x 18

18.7

16 x 20

27.3

12 x 12

7.2

14 x 14

11.5

16 x 16

11.5

18 x 18

14.1

20 x 20

18.4

12 x 12

7.1

14 x 14

11.1

12 x 12

7.2

14 x 14

7.2

16 x 16

18 x 18

17.2

20 x 20

23.8

*WHEN THESE SPRINKLERS ARE USED IN NFPA 13 SYSTEMS, A 0.1 DESIGN DENSITY MINIMUM SHALL BE UTILIZED. July 2013

Page 3 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE GL SERIES RESIDENTIAL SPRINKLER DESIGN GUIDE STYLE

REPLACEMENT PENDENT & RECESSED (RES3)

REPLACEMENT PENDENT REPLACEMENT RECESSED PENDENT REPLACEMENT PENDENT & RECESSED REPLACEMENT CONCEALED PENDENT or REPLACEMENT ADJUSTABLE CONCEALED PENDENT REPLACEMENT CONCEALED PENDENT or REPLACEMENT ADJUSTABLE CONCEALED PENDENT

SIN MODEL

GL2810

GL4210

GL3511 or GL3547

GL4211 or GL4247

K FACTOR

2.8

TEMP. °F

COVERAGE FT x FT

MINIMUM FLOW GPM **

MINIMUM PRESSURE PSI **

12 x 12

12.7

14 x 14

12.7

16 x 16

15.4

18 x 18

21.6

20 x 20

32.7

14 x 14

22.7

16 x 16

22.7

14 x 14

18.4

16 x 16

18.4

18 x 18

18.4

12 x 12

9.6

20 x 20

20.5

12 x 12

14 x 14

11.7

16 x 16

11.7

18 x 18

13.8

20 x 20

20.9

12 x 12

9.6

14 x 14

16.4

16 x 16

27.4

9.6

155, 175

4.2

155

4.2

155

4.2

155

3.5

155

4.2

155

12 x 12

14 x 14 REPLACEMENT HORIZONTAL SIDEWALL & RECESSED (RES4)

REPLACEMENT HORIZONTAL SIDEWALL & RECESSED (RES)

REPLACEMENT HORIZONTAL SIDEWALL & RECESSED (RES2)

GL4234

GL4230

GL5630

GL5631

4.2

155, 175

4.2

155

5.6

155

5.6

155

*15

12.8

11.1

*16

14.5

16.4

*19

20.5

16 x 18

25.0

16 x 20

41.3

16 x 16

18 x 18

27.4

12 x 12

20.5

14 x 14

25.0

16 x 16

32.7

12 x 12

12.8

14 x 14

16.9

16 x 16

18.4

12 x 12

10.3

16 x 18

28.7

16 x 20

39.1

*DEFLECTOR POSITION BELOW CEILING 6” TO 12”. **WHEN THESE SPRINKLERS ARE USED IN NFPA 13 SYSTEMS, A 0.1 DESIGN DENSITY MINIMUM SHALL BE UTILIZED.

July 2013

Page 4 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE RESIDENTIAL SPRINKLER GUIDE GL SERIES RESIDENTIAL SPRINKLER DESIGN GUIDE DISCHARGE TABLES IN GALLONS PER MINUTE K = 3.0 PSI GPM

K = 4.1 PSI GPM

PSI GPM PSI GPM

K = 4.2

PSI GPM PSI GPM

PSI GPM

1 2 3 4 5

3.00 4.24 5.20 6.00 6.71

26 27 28 29 30

15.30 15.59 15.87 16.16 16.43

51 52 53 54 55

21.42 21.63 21.84 22.05 22.25

76 77 78 79 80

26.15 26.32 26.50 26.66 26.83

1 2 3 4 5

4.10 5.80 7.10 8.20 9.17

26 27 28 29 30

20.91 21.30 21.70 22.08 22.46

51 52 53 54 55

29.28 29.57 29.85 30.13 30.41

76 77 78 79 80

35.74 35.98 36.21 36.44 36.67

1 2 3 4 5

4.20 5.94 7.27 8.40 9.39

26 27 28 29 30

21.42 21.82 22.22 22.62 23.00

51 52 53 54 55

29.99 30.29 30.58 30.86 31.15

76 77 78 79 80

36.61 36.85 37.09 37.33 37.57

6 7 8 9 10

7.35 7.94 8.49 9.00 9.49

31 32 33 34 35

16.70 16.97 17.23 17.49 17.75

56 57 58 59 60

22.45 22.65 22.85 23.04 23.24

81 82 83 84 85

27.00 27.17 27.33 27.50 27.66

6 7 8 9 10

10.04 10.85 11.60 12.30 12.97

31 32 33 34 35

22.83 23.19 23.55 23.91 24.26

56 57 58 59 60

30.68 30.95 31.22 31.49 31.76

81 82 83 84 85

36.90 37.13 37.35 37.58 37.80

6 7 8 9 10

10.29 11.11 11.88 12.60 13.28

31 32 33 34 35

23.38 23.76 24.13 24.49 24.85

56 57 58 59 60

31.43 31.71 31.99 32.26 32.53

81 82 83 84 85

37.80 38.03 38.26 38.49 38.72

11 12 13 14 15

9.95 10.39 10.82 11.22 11.62

36 37 38 39 40

18.00 18.25 18.49 18.73 18.97

61 62 63 64 65

23.43 23.62 23.81 24.00 24.19

86 87 88 89 90

27.82 27.98 28.14 28.30 28.46

11 12 13 14 15

13.60 14.20 14.78 15.34 15.88

36 37 38 39 40

24.60 24.94 25.27 25.60 25.93

61 62 63 64 65

32.02 32.28 32.54 32.80 33.06

86 87 88 89 90

38.02 38.24 38.46 38.68 38.90

11 12 13 14 15

13.93 14.55 15.14 15.71 16.27

36 37 38 39 40

25.20 25.55 25.89 26.23 26.56

61 62 63 64 65

32.80 33.07 33.34 33.60 33.86

86 87 88 89 90

38.95 39.17 39.40 39.62 39.84

16 17 18 19 20

12.00 12.37 12.73 13.08 13.42

41 42 43 44 45

19.21 19.44 19.67 19.90 20.12

66 67 68 69 70

24.37 24.56 24.74 24.92 25.10

91 92 93 94 95

28.62 28.77 28.93 29.09 29.24

16 17 18 19 20

16.40 16.90 17.39 17.87 18.34

41 42 43 44 45

26.25 26.57 26.89 27.20 27.50

66 67 68 69 70

33.31 33.56 33.81 34.06 34.30

91 92 93 94 95

39.11 39.33 39.54 39.75 39.96

16 17 18 19 20

16.80 17.32 17.82 18.31 18.78

41 42 43 44 45

26.89 27.22 27.54 27.86 28.17

66 67 68 69 70

34.12 34.38 34.63 34.89 35.14

91 92 93 94 95

40.07 40.28 40.50 40.72 40.94

21 22 23 24 25

13.75 14.07 14.39 14.70 15.00

46 47 48 49 50

20.35 20.57 20.78 21.00 21.21

71 72 73 74 75

25.28 96 25.46 97 25.63 98 25.81 99 25.98 100

29.39 29.55 29.70 29.84 30.00

21 22 23 24 25

18.79 19.23 19.66 20.09 20.50

46 47 48 49 50

27.81 28.11 28.41 28.70 28.99

71 72 73 74 75

34.55 96 34.79 97 35.03 98 35.27 99 35.51 100

40.17 40.38 40.59 40.79 41.00

21 22 23 24 25

19.25 19.70 20.14 20.58 21.00

46 47 48 49 50

28.49 28.79 29.10 29.40 29.70

71 72 73 74 75

35.39 96 35.64 97 35.88 98 36.13 99 36.37 100

41.15 41.37 41.58 41.79 42.00

K = 4.4

PSI GPM

PSI GPM PSI GPM PSI GPM

K = 4.9

K = 5.6

PSI GPM PSI GPM PSI GPM PSI GPM 1 4.90 26 24.99 51 34.99 76 42.72 2 6.93 27 25.46 52 35.33 77 43.00 3 8.49 28 25.93 53 35.67 78 43.28 4 9.80 29 26.39 54 36.01 79 43.55 5 10.96 30 26.84 55 36.34 80 43.83

PSI GPM PSI GPM PSI GPM PSI GPM 1 5.60 26 28.55 51 39.99 76 48.82 2 7.92 27 29.10 52 40.39 77 49.14 3 9.70 28 29.63 53 40.77 78 49.46 4 11.20 29 30.16 54 41.15 79 49.77 5 12.52 30 30.67 55 41.53 80 50.09

PSI GPM 1 4.40 2 6.22 3 7.62 4 8.80 5 9.84

PSI 26 27 28 29 30

GPM PSI GPM PSI GPM 22.44 51 31.42 76 38.36 22.86 52 31.73 77 38.61 23.28 53 32.03 78 38.86 23.69 54 32.33 79 39.11 24.10 55 32.63 80 39.35

6 7 8 9 10

10.78 11.64 12.45 13.20 13.91

31 32 33 34 35

24.50 24.89 25.28 25.66 26.03

56 57 58 59 60

32.93 33.22 33.51 33.80 34.08

81 82 83 84 85

39.60 39.84 40.09 40.33 40.57

6 7 8 9 10

12.00 12.96 13.86 14.70 15.50

31 32 33 34 35

27.28 27.72 28.15 28.57 28.99

56 57 58 59 60

36.67 36.99 37.32 37.64 37.96

81 82 83 84 85

44.10 44.37 44.64 44.91 45.18

6 7 8 9 10

13.72 14.82 15.84 16.80 17.71

31 32 33 34 35

31.18 31.68 32.17 32.65 33.13

56 57 58 59 60

41.91 42.28 42.65 43.01 43.38

81 82 83 84 85

50.40 50.71 51.02 51.32 51.63

11 12 13 14 15

14.59 15.24 15.86 16.46 17.04

36 37 38 39 40

26.40 26.76 27.12 27.48 27.83

61 62 63 64 65

34.37 34.65 34.92 35.20 35.47

86 87 88 89 90

40.80 41.04 41.28 41.57 41.74

11 12 13 14 15

16.25 16.97 17.67 18.33 18.98

36 37 38 39 40

29.40 29.81 30.21 30.60 31.00

61 62 63 64 65

38.27 38.58 38.89 39.20 39.51

86 87 88 89 90

45.44 45.70 45.97 46.23 46.49

11 12 13 14 15

18.57 19.40 20.19 20.95 21.69

36 37 38 39 40

33.60 34.06 34.52 34.97 35.42

61 62 63 64 65

43.74 44.09 44.45 44.80 45.15

86 87 88 89 90

51.93 52.23 52.53 52.83 53.13

16 17 18 19 20

17.60 18.14 18.67 19.18 19.68

41 42 43 44 45

28.17 28.52 28.85 29.19 29.52

66 67 68 69 70

35.75 36.02 36.28 36.55 36.81

91 92 93 94 95

41.97 42.20 42.43 42.66 42.89

16 17 18 19 20

19.60 20.20 20.79 21.36 21.91

41 42 43 44 45

31.38 31.76 32.13 32.50 32.87

66 67 68 69 70

39.81 40.11 40.41 40.70 41.00

91 92 93 94 95

46.74 47.00 47.25 47.51 47.76

16 17 18 19 20

22.40 23.09 23.76 24.41 25.04

41 42 43 44 45

35.86 36.92 36.72 37.15 37.57

66 67 68 69 70

45.49 45.84 46.18 46.52 46.85

91 92 93 94 95

53.42 53.71 54.00 54.29 54.58

21 22 23 24 25

20.16 20.64 21.10 21.56 22.00

46 47 48 49 50

29.84 30.16 30.48 30.80 31.11

71 72 73 74 75

37.08 96 37.34 97 37.59 98 37.85 99 38.11 100

43.11 43.33 43.56 43.78 44.00

21 22 23 24 25

22.45 22.98 23.50 24.00 24.50

46 47 48 49 50

33.23 33.59 33.95 34.30 34.65

71 72 73 74 75

41.29 96 41.58 97 41.87 98 42.15 99 42.44 100

48.01 48.26 48.51 48.75 49.00

21 22 23 24 25

25.66 26.27 26.86 27.43 28.00

46 47 48 49 50

37.98 38.39 38.80 39.20 39.60

71 72 73 74 75

47.19 96 47.52 97 47.85 98 48.17 99 48.50 100

54.87 55.15 55.44 55.72 56.00

July 2013

Page 5 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODELS GL4110 & GL4910 RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MODEL GL4110 - K = 4.1 (58 metric) & MODEL GL4910 - K = 4.9 (68 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

14'

2' 0'

12'

GL4110 - 11 GPM - 7.2 PSI GL4910 - 13 GPM - 7 PSI

GL4110 - 12 GPM - 8.6 PSI GL4910 - 14 GPM - 8.2 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

2' 0'

16'

CEILING

18'

GL4910 - 18 GPM - 13.5 PSI

GL4110 - 14 GPM - 11.7 PSI GL4910 - 14 GPM - 8.2 PSI

18’ x 18’ ROOM SIZE

16’ x 16’ ROOM SIZE

(HALF PATTERN) SIDE WALLS

(HALF PATTERN) 8'

BACK WALL

CEILING

10'

6' 4' 2' 0'

20'

GL4910 - 20 GPM - 16.7 PSI

FLOW LEGEND

20’ x 20’ ROOM SIZE (HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 6 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL3010 RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLER MODEL GL3010 - K = 3.0 (42 metric)

SIDE WALLS 8'

BACK WALL

CEILING

12'

6' 4' 2' 0'

GL3010 - 8 GPM - 7.1 PSI

12’ x 12’ ROOM SIZE (HALF PATTERN)

SIDE WALLS 8'

BACK WALL

CEILING

14'

6' 4' 2' 0'

GL3010 - 10 GPM - 11.1 PSI

14’ x 14’ ROOM SIZE (HALF PATTERN)

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

Page 7 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL5610 RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MODEL GL5610 - K = 5.6 (80 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

14'

2' 0'

12'

GL5610 - 15 GPM - 7.2 PSI

GL5610 - 19 GPM - 11.5 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

CEILING

18'

2' 0'

16'

GL5610 - 19 GPM - 11.5 PSI

GL5610 - 21 GPM - 14.1 PSI

16’ x 16’ ROOM SIZE

18’ x 18’ ROOM SIZE

(HALF PATTERN)

(HALF PATTERN) SIDE WALLS

BACK WALL

CEILING

10'

20'

6' 4' 2' 0'

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

GL5610 - 24 GPM - 18.4 PSI

20’ x 20’ ROOM SIZE (HALF PATTERN) Page 8 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL2810 REPLACEMENT RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MODEL GL2810 - K = 2.8 (39 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

14'

12'

GL2810 - 10 GPM - 12.7 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

CEILING

18'

2' 0'

16'

GL2810 - 10 GPM - 12.7 PSI

GL2810 - 11 GPM - 15.4 PSI

16’ x 16’ ROOM SIZE

18’ x 18’ ROOM SIZE

(HALF PATTERN)

(HALF PATTERN) SIDE WALLS

BACK WALL

CEILING

10'

20'

6' 4' 2' 0'

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

GL2810 - 14 GPM - 25.0 PSI

20’ x 20’ ROOM SIZE (HALF PATTERN) Page 9 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4210 REPLACEMENT RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MODEL GL4210 - K = 4.2 (59 metric) SIDE WALLS

SIDE WALLS 8'

BACK WALL

CEILING

2' 0'

BACK WALL

12'

CEILING

12'

GL4210 - 13 GPM - 9.6 PSI PENDENT STYLE

12’ x 12’ ROOM SIZE

GL4210 - 13 GPM - 9.6 PSI RECESSED PENDENT STYLE

(HALF PATTERN) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

CEILING

14'

2' 0'

14'

GL4210 - 20 GPM - 22.7 PSI PENDENT STYLE

GL4210 -18 GPM - 18.4 PSI RECESSED PENDENT STYLE

14’ x 14’ ROOM SIZE (HALF PATTERN) SIDE WALLS

SIDE WALLS 8'

BACK WALL

CEILING

BACK WALL

16'

CEILING

16'

GL4210 - 20 GPM - 22.7 PSI PENDENT STYLE

FLOW LEGEND

16’ x 16’ ROOM SIZE

GL4210 - 18 GPM - 18.4 PSI RECESSED PENDENT STYLE

(HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 10 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4210 REPLACEMENT RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MODEL GL4210 - K = 4.2 (59 metric) SIDE WALLS 8'

BACK WALL

CEILING

18'

6' 4' 2' 0'

GL4210 - 18 GPM - 18.4 PSI RECESSED PENDENT STYLE

18’ x 18’ ROOM SIZE (HALF PATTERN)

SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

10'

BACK WALL

CEILING

10'

20'

2' 0'

20'

GL4210 - 19 GPM - 20.5 PSI PENDENT STYLE

GL4210 - 19 GPM - 20.5 PSI RECESSED PENDENT STYLE

20’ x 20’ ROOM SIZE (HALF PATTERN)

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

Page 11 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4147 RESIDENTIAL CONCEALED PENDENT SPRINKLER MODEL GL4147 - K = 4.1 (58 metric) SIDE WALLS 8'

BACK WALL

CEILING

12'

6' 4' 2' 0'

GL4147 - 11 GPM - 7.2 PSI

12’ x 12’ ROOM SIZE (HALF PATTERN) SIDE WALLS 8'

BACK WALL

CEILING

14'

6' 4' 2' 0'

GL4147 - 15 GPM - 13.4 PSI

14’ x 14’ ROOM SIZE (HALF PATTERN) SIDE WALLS 8'

BACK WALL

CEILING

16'

6' 4' 2' 0'

GL4147 - 15 GPM - 13.4 PSI

FLOW LEGEND

16’ x 16’ ROOM SIZE (HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 12 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODELS GL4947 & GL4906 RESIDENTIAL ADJUSTABLE CONCEALED PENDENT SPRINKLERS MODEL GL4947 & GL4906 - K = 4.9 (68 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

14'

2' 0'

12'

GL4947 - 13 GPM - 7 PSI GL4906 - 13 GPM - 7 PSI

GL4947 - 14 GPM - 8.2 PSI GL4906 - 13 GPM - 7 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

2' 0'

16'

CEILING

18'

GL4947 - 14 GPM - 8.2 PSI GL4906 - 13 GPM - 7 PSI

GL4947 - 17 GPM - 12 PSI GL4906 - 17 GPM - 12 PSI

16’ x 16’ ROOM SIZE

18’ x 18’ ROOM SIZE

(HALF PATTERN)

(HALF PATTERN) SIDE WALLS

BACK WALL

CEILING

10'

20'

6' 4' 2' 0'

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

GL4947 - 20 GPM - 16.7 PSI GL4906 - 20 GPM - 16.7 PSI

20’ x 20’ ROOM SIZE (HALF PATTERN) Page 13 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4211 REPLACEMENT RESIDENTIAL CONCEALED PENDENT SPRINKLERS MODEL GL4211 - K = 4.2 (59 metric) SIDE WALLS 8'

BACK WALL

CEILING

12'

6' 4' 2' 0'

GL4211 - 13 GPM - 9.6 PSI

12’ x 12’ ROOM SIZE (HALF PATTERN) SIDE WALLS 8'

BACK WALL

CEILING

14'

6' 4' 2' 0'

GL4211 - 17 GPM - 16.4 PSI

14’ x 14’ ROOM SIZE (HALF PATTERN) SIDE WALLS 8'

BACK WALL

CEILING

16'

6' 4' 2' 0'

GL4211 - 22 GPM - 27.4 PSI

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

16’ x 16’ ROOM SIZE (HALF PATTERN) Page 14 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODELS GL3511 & GL3547 REPLACEMENT RESIDENTIAL CONCEALED PENDENT SPRINKLERS MODEL GL3511 & GL3547 - K = 3.5 (49 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

14'

2' 0'

12'

GL3511 & GL3547 - 11 GPM - 7.2 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

2' 0'

16'

CEILING

18'

GL3511 & GL3547 - 13 GPM - 10 PSI

GL3511 & GL3547 - 17 GPM - 17.2 PSI

16’ x 16’ ROOM SIZE

18’ x 18’ ROOM SIZE

(HALF PATTERN)

(HALF PATTERN) SIDE WALLS

BACK WALL

CEILING

10'

20'

6' 4' 2' 0'

GL3511 & GL3547 - 20 GPM - 23.8 PSI

FLOW LEGEND

20’ x 20’ ROOM SIZE (HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 15 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MILLENNIUMTM MODEL GL4248 RESIDENTIAL FLUSH PENDENT SPRINKLERS MODEL GL4248 - K = 4.1 (58 metric) SIDE WALLS 8'

BACK WALL

SIDE WALLS

CEILING

BACK WALL

2' 0'

12'

14'

GL4248 - 11 GPM - 7.2 PSI

12’ x 12’ ROOM SIZE

14’ x 14’ ROOM SIZE

(HALF PATTERN)

SIDE WALLS 8'

CEILING

BACK WALL

SIDE WALLS

CEILING

BACK WALL

16'

CEILING

18'

GL4248 - 13 GPM - 10 PSI

GL4248 - 17 GPM - 17.2 PSI

16’ x 16’ ROOM SIZE

18’ x 18’ ROOM SIZE

(HALF PATTERN)

(HALF PATTERN) SIDE WALLS

BACK WALL

CEILING

10'

20'

6' 4' 2' 0'

GL4248 - 20 GPM - 23.8 PSI

20’ x 20’ ROOM SIZE FLOW LEGEND

(HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 16 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4231 RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS MODEL GL4231 - K = 4.2 (59 metric) 6"

BACK WALL SIDE WALL

FAR WALL

0' 6"

6' 6'

12'

FAR WALL

18'

GL4231 - 13 GPM - 9.6 PSI DEFLECTOR 6” BELOW CEILING

GL4231 - 19 GPM - 20.5 PSI DEFLECTOR 6” BELOW CEILING

12’ x 12’ ROOM SIZE

16’ x 18’ ROOM SIZE

(HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

0' 6"

7' 6'

2' 0'

14'

SIDE WALL

BACK WALL

2' 0'

BACK WALL SIDE WALL

FAR WALL

20'

GL4231 - 15 GPM - 12.8 PSI DEFLECTOR 6” BELOW CEILING

GL4231 - 23 GPM - 30.0 PSI DEFLECTOR 6” BELOW CEILING

14’ x 14’ ROOM SIZE

16’ x 20’ ROOM SIZE

(HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

16'

6' 4' 2' 0'

GL4231 - 16 GPM - 14.5 PSI DEFLECTOR 6” BELOW CEILING

16’ x 16’ ROOM SIZE (HALF PATTERN)

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

Page 17 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4431 RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS MODEL GL4431 - K = 4.4 (62 metric) 6"

BACK WALL SIDE WALL

FAR WALL

0' 6"

2' 0'

12'

SIDE WALL

FAR WALL

18'

GL4431 - 13 GPM - 8.7 PSI DEFLECTOR 6” BELOW CEILING

GL4431 - 19 GPM - 18.7 PSI DEFLECTOR 6” BELOW CEILING

12’ x 12’ ROOM SIZE

16’ x 18’ ROOM SIZE

(HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

0' 6"

2' 0'

14'

BACK WALL

BACK WALL SIDE WALL

FAR WALL

20'

GL4431 - 15 GPM - 11.6 PSI DEFLECTOR 6” BELOW CEILING

GL4431 - 23 GPM - 27.3 PSI DEFLECTOR 6” BELOW CEILING

14’ x 14’ ROOM SIZE

16’ x 20’ ROOM SIZE

(HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

16'

6' 4' 2' 0'

GL4431 - 16 GPM - 13.2 PSI DEFLECTOR 6” BELOW CEILING

16’ x 16’ ROOM SIZE (HALF PATTERN)

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

Page 18 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4234 REPLACEMENT RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS MODEL GL4234 - K = 4.2 (59 metric)

BACK WALL SIDE WALL

FAR WALL

0' 12"

BACK WALL SIDE WALL

FAR WALL

12'

2' 0'

12'

GL4234 - 15 GPM - 12.8 PSI DEFLECTOR 12” BELOW CEILING

GL4234 - 13 GPM - 9.6 PSI DEFLECTOR 6” BELOW CEILING

12’ x 12’ ROOM SIZE (HALF PATTERN) 6"

BACK WALL SIDE WALL

FAR WALL

0' 12"

2' 0'

14'

BACK WALL SIDE WALL

FAR WALL

14'

GL4234 - 14 GPM - 11.1 PSI DEFLECTOR 6” BELOW CEILING

GL4234 - 16 GPM - 14.5 PSI DEFLECTOR 12” BELOW CEILING

14’ x 14’ ROOM SIZE (HALF PATTERN) 6"

BACK WALL SIDE WALL

FAR WALL

0' 12"

BACK WALL SIDE WALL

FAR WALL

16'

2' 0'

16'

GL4234 - 17 GPM - 16.4 PSI DEFLECTOR 6” BELOW CEILING

GL4234 - 19 GPM - 20.5 PSI DEFLECTOR 12” BELOW CEILING

16’ x 16’ ROOM SIZE (HALF PATTERN)

FLOW LEGEND TOP OF SPRINKLER FLOW July 2013

Page 19 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL4234 REPLACEMENT RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS MODEL GL4234 - K = 4.2 (59 metric) 6"

BACK WALL SIDE WALL

FAR WALL

18'

6' 4' 2' 0'

GL4234 - 21 GPM - 25.0 PSI DEFLECTOR 6” BELOW CEILING

16’ x 18’ ROOM SIZE (HALF PATTERN) 6"

BACK WALL SIDE WALL

FAR WALL

20'

6' 4' 2' 0'

GL4234 - 27 GPM - 41.3 PSI DEFLECTOR 6” BELOW CEILING

16’ x 20’ ROOM SIZE (HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

18'

6' 4' 2' 0'

GL4234 - 22 GPM - 27.4 PSI DEFLECTOR 6” BELOW CEILING

18’ x 18’ ROOM SIZE FLOW LEGEND

(HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 20 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS GL SERIES REPLACEMENT RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS

MODEL GL4230 - K = 4.2 (59 metric) & MODEL GL5630 - K = 5.6 (80 metric) 6"

BACK WALL SIDE WALL

FAR WALL

0' 6"

2' 0'

12'

BACK WALL SIDE WALL

FAR WALL

12'

GL4230 - 19 GPM - 20.5 PSI DEFLECTOR 6” BELOW CEILING

GL5630 - 20 GPM - 12.8 PSI DEFLECTOR 6” BELOW CEILING

12’ x 12’ ROOM SIZE (HALF PATTERN) 6"

BACK WALL SIDE WALL

FAR WALL

BACK WALL SIDE WALL

FAR WALL

14'

2' 0'

14'

GL5630 - 23 GPM - 16.9 PSI DEFLECTOR 6” BELOW CEILING

GL4230 - 21 GPM - 25.0 PSI DEFLECTOR 6” BELOW CEILING

14’ x 14’ ROOM SIZE (HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

0' 6"

2' 0'

16'

BACK WALL SIDE WALL

FAR WALL

16'

GL4230 - 24 GPM - 32.7 PSI DEFLECTOR 6” BELOW CEILING

FLOW LEGEND

GL5630 - 24 GPM - 18.4 PSI DEFLECTOR 6” BELOW CEILING

16’ x 16’ ROOM SIZE (HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 21 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WALL WETTING PATTERNS MODEL GL5631 REPLACEMENT RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS MODEL GL5631 - K = 5.6 (80 metric) 6"

BACK WALL SIDE WALL

FAR WALL

12'

6' 4' 2' 0'

GL5631 - 18 GPM - 10.3 PSI DEFLECTOR 6” BELOW CEILING

12’ x 12’ ROOM SIZE (HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

18'

6' 4' 2' 0'

GL5631 - 30 GPM - 28.7 PSI DEFLECTOR 6” BELOW CEILING

16’ x 18’ ROOM SIZE (HALF PATTERN)

BACK WALL SIDE WALL

FAR WALL

20'

6' 4' 2' 0'

GL5631 - 35 GPM - 39.1 PSI DEFLECTOR 6” BELOW CEILING

16’ x 20’ ROOM SIZE FLOW LEGEND

(HALF PATTERN)

TOP OF SPRINKLER FLOW July 2013

Page 22 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS THE FOLLOWING INSTALLATION GUIDELINES HAVE BEEN DEVELOPED USING IN-HOUSE DATA FOR THE CONVENIENCE OF CUSTOMERS CONFRONTED WITH INSTALLATIONS THAT ARE NOT REFERENCED IN THE NFPA 13 STANDARD.

GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS ON A HORIZONTAL CEILING, DISTANCE TO PITCHED CEILING MIN. ALLOWABLE A

ANGLE B DEGREES

0'-4"

0'-6"

0'-9"

1'-1"

1'-6"

1'-10"

2'-3"

2'-8"

3'-0"

NOTE: E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING.

GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS ON A PITCHED CEILING, DISTANCE TO HORIZONTAL CEILING MIN. ALLOWABLE A

ANGLE B DEGREES

0'-8"

1'-0"

1'-4"

1'-8"

2'-2"

2'-5"

2'-8"

3'-3"

3'-6"

NOTE: E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING. July 2013

Page 23 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS MAXIMUM VERTICAL DISTANCE ON INTERSECTING HORIZONTAL AND PITCHED CEILINGS

MIN. ALLOWABLE MIN. ALLOWABLE A B

ANGLE C DEGREES

0'-6"

8'-0"

1'-0"

8'-0"

1'-6"

8'-0"

2'-0"

8'-8"

2'-6"

9'-3"

3'-0"

10'-0"

3'-6"

10'-6"

4'-0"

11'-0"

4'-6"

11'-0"

GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS ON PITCHED CEILINGS OF MULTIPLE ANGLES MIN. ALLOWABLE B

ANGLE C DEGREES

8'-0"

7'-6"

7'-0"

6'-6"

6'-0"

5'-6"

5'-0"

NOTES: A DIMENSION IS MINIMUM 6 INCHES. E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING. July 2013

Page 24 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS ON OPPOSING PITCHED CEILINGS MIN. ALLOWABLE A

ANGLE B DEGREES

8'-0"

8'-6"

10'-0"

11'-0"

12'-0"

12'-6"

13'-0"

NOTE: E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING.

GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SINGLE SPRINKLER INSTALLATION ON OPPOSING PITCHED CEILINGS

SPACING

ANGLE * DEGREES

12'

14'

16'

18'

20'

1'-0"

1'-6"

2'-0"

1'-0"

1'-6"

2'-0"

3'-0"

1'-0"

1'-6"

2'-6"

3'-0"

4'-0"

2'-0"

2'-6"

4'-0"

4'-6"

5'-0"

3'-0"

4'-0"

5'-0" A DIMENSION

5'-6"

6'-0"

NOTES: E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING. * ANGLE B OR C, WHICH EVER IS GREATER. July 2013

Page 25 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS ON OPPOSING PITCHED CEILINGS WITH MINIMUM REQUIRED OBSTRUCTION FOR WATER SHIELDING

A DIMENSION

MINIMUM ALLOWABLE B ANGLE C = 15째 ANGLE C = 30째 ANGLE C = 45째

1'-0"

0'-6"

0'-10"

2'-0"

0'-8"

1'-0"

1'-8"

3'-0"

0'-10"

1'-6"

2'-2"

4'-0"

1'-0"

2'-0"

2'-10"

5'-0"

1'-2"

2'-2"

3'-6"

6'-0"

N/A

2'-6"

3'-10"

7'-0"

N/A

3'-10"

8'-0"

N/A

4'-4"

NOTE: E DIMENSION NOT TO EXCEED ONE HALF THE LISTED SPACING.

GL SERIES RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS DISTANCE FROM OBSTRUCTIONS

July 2013

MIN. ALLOWABLE A

B DIMENSION

2'-4"

0'-4"

3'-4"

0'-6"

4'-0"

0'-8"

4'-4"

0'-10"

5'-0"

1'-0"

5'-8"

1'-2"

6'-4"

1'-4"

Page 26 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS GL SERIES RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS DISTANCE FROM OBSTRUCTIONS MIN. ALLOWABLE A

B DIMENSION

7'-4"

0'-4"

8'-4"

0'-6"

9'-5"

0'-8"

10'-6"

0'-10"

11'-3"

1'-0"

11'-8"

1'-2"

12'-4"

1'-4"

GL SERIES RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS USED ON A PITCHED CEILING WITH DEFLECTOR PARALLEL TO CEILING

NOTE: ANGLE NOT TO EXCEED 30째.

July 2013

Page 27 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DIAGRAMS GL SERIES RESIDENTIAL HORIZONTAL SIDEWALL AND RECESSED HORIZONTAL SIDEWALL SPRINKLERS ON OPPOSING SLOPED CEILINGS B

3' 0" MAX.

8' 0" MIN.

CEILING ANGLE A

10°

15°

20°

12'

MINIMUM SLOPED DISTANCE B 1'-0"

12'

MINIMUM SLOPED DISTANCE B 1'-0"

14'

1'-0"

14'

1'-0"

16'

1'-0"

16'

1'-0"

18'

1'-0"

18'

2'-4"

20'

1'-0"

20'

3'-10"

12'

1'-0"

12'

1'-4"

14'

1'-0"

14'

1'-0"

16'

1'-0"

16'

2'-0"

18'

1'-0"

18'

3'-2"

20'

2'-0"

20'

4'-4"

12'

1'-0"

12'

1'-0"

14'

1'-0"

14'

1'-6"

16' 18' 20'

2'-8" 3'-8" 4'-8"

SPRINKLER SPACING

16' 18' 20'

CEILING ANGLE A

25°

30°

33.7°

1'-0" 1'-0" 3'-0"

SPRINKLER SPACING

(A1), (A2) ACCEPTABLE FOR SLOPES 10° - 33.7°. USE THE GREATER ANGLE (A1) , OR (A2). (B) MINIMUM DISTANCE TO INTERSECTING OPPOSED SLOPED AS SPECIFIED IN THE ABOVE CHART. (C) NOT TO EXCEED ONE HALF THE LISTED SPACING (SEE TECHNICAL DATA SHEETS A-4 & A-5) FOR COVERAGE AREA, MEASURED ALONG THE SLOPE.

NON-SYMMETRIC SPRINKLER LOCATIONS ON OPPOSING SLOPES.

July 2013

Page 28 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DATA NEAR HEAT SOURCES GL SERIES RESIDENTIAL SPRINKLERS PROXIMITY OF SPRINKLERS TO HEAT SOURCES

HEAT SOURCE

DIMENSION

Lateral distance from the sides of an open hearth fireplace Lateral distance from the sides of a recessed hearth fireplace Lateral distance from the front of a recessed hearth fireplace Lateral distance from the surface of a coal or wood burning stove Lateral distance from the surface of a kitchen range Lateral distance from a wall oven Lateral distance from the surface of hot air flues Lateral distance from uninsulated heating ducts Lateral distance from uninsulated water pipes Lateral distance from edges of a ceiling mounted hot air diffuser Lateral distance from the sides of a wall mounted hot air diffuser Lateral distance from the front of a wall mounted hot air diffuser Lateral distance from the surface of a water heater or furnace Lateral distance from a 250 watt, or less light fixture July 2013

Page 29 www.globalfire.com.co - PBX: (+571) 898.54.55

3'-0" 3'-0" 7'-0" 3'-6" 1'-6" 1'-6" 1'-6" 1'-6" 1'-0" 2'-0" 2'-0" 3'-0" 0'-6" 0'-6"

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE INSTALLATION DATA NEAR HEAT SOURCES GL SERIES RESIDENTIAL SPRINKLERS PROXIMITY OF SPRINKLERS TO HEAT SOURCES

POSTIONING CRITERIA FOR SPRINKLERS TO BE LOCATED NEAR AN OPEN HEARTH FIREPLACE

POSTIONING CRITERIA FOR SPRINKLERS TO BE LOCATED NEAR A RANGE OR WALL OVEN

POSTIONING CRITERIA FOR SPRINKLERS TO BE LOCATED NEAR A COAL OR WOOD BURNING STOVE

POSTIONING CRITERIA FOR SPRINKLERS TO BE LOCATED NEAR A RECESSED HEARTH FIREPLACE POSTIONING CRITERIA FOR SPRINKLERS TO BE LOCATED NEAR A FURNACE OR WATER HEATER

NOTE: SPRINKLERS MUST BE LOCATED OUTSIDE OF SHADED AREAS. July 2013

Page 30 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN R.S.I.G. REV. #17

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

300 psi 3", 4", 6", 8" & 150mm MODEL H-2 ALARM CHECK VALVE

DESCRIPTION AND OPERATION

The Globe Model H-2 High Pressure Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through the use of a hydraulic retard chamber a time delay is provided to eliminate potential false alarms caused by fluctuating water supply pressures. Where constant pressure water supplies are used the retard chamber (time delay) is not necessary. By incorporating the use of electrical pressure switches, other supplemental alarms, annunciators etc. may also be used. A unique feature found on the Globe Model H-2 High Pressure 3", 4", 6" and 150mm Alarm Check Valves is the clapper being hinged to the handhole cover for extreme ease of removal for inspection and service. Globe 3", 4", 6" and 150mm Model H-2 High Pressure Alarm Check Valves may be installed in both vertical and horizontal positions and trim can be provided for both variable and constant water supply pressures in either of these positions. Globe 8" Model H-2 High Pressure Alarm Check Valve must be installed in the vertical position and trim can be provided for both variable and constant water supply pressures. The body and cover of the High Pressure Alarm Check Valve is constructed of high tensile strength ductile iron. All interior operating parts are machined from highly corrosive-resistant alloys, each having high strength and good wear resistance. Rubber parts are of selective materials which have good abrasive resistance and long life expectancy in terms of resiliency.

MODEL H-2 GROOVE/GROOVE

APPROVALS cULus Listed FM Approved

TECHNICAL DATA

Water Working Pressure Rating - 300 psi (20.7 bars) Factory tested hydrostatically to 600 psi (41.4 bars). Equivalent feet of pipe: 3” Valve = 12.2 feet, 4” Valve = 9.7 feet 6” Valve = 17 feet, 8" Valve = 21 feet SIZE H-2

PHYSICAL DATA

JULY 2012

3" [80mm] ANSI/DIN

4" [100mm] ANSI/DIN

6" ANSI

150mm DIN

8" [200mm] ANSI / DIN

OVERALL LENGTH

10"

12"

Weight of Valve Complete with Vertical Variable Pressure Trimmings

20 lbs. 57 lbs.

22 lbs. 69 lbs.

46 lbs. 95 lbs.

106 lbs. 157 lbs.

C-3 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN ACV-HP

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

300 psi 3", 4", 6", 8" & 150mm MODEL H-2 ALARM CHECK VALVE

MODEL H-2 CROSS SECTIONS 7

18 13

14 16

9 10

FRONT VIEW ITEM

DESCRIPTION

MAT'L

3" [80mm] P/N

4" [100mm] P/N

TOP VIEW

6" / 150mm P/N 323666-HP/ 323666-D-HP

8" [200mm] P/N

ITEM

DESCRIPTION

MAT'L

3" [80mm] P/N

4" [100mm] P/N

6" / 150mm P/N

8" [200mm] P/N 323843

"H-2" Body

323858-HP

Disc Retainer

Stainless

323816

323512

323572

Cover Bolt

Steel

323408

323509

323569

323839

Lock Nut

Stainless

323514

------

Seat Ring

Bronze

323809

323504

323564

323837

Disc Retainer Bolt

Stainless

323817

323513

323573

323838

Ductile Iron 323827-HP 323552-HP

Cover

323567-HP

323835-HP

Sealing Washer

*Clapper

Ductile Iron 323805-HP 323507-HP Stainless

323814

323510

323507

323841

Hinge Pin Bushings (2)

Hard Fiber

323515

------

Bronze

323819

323518

323846

Retaining Ring

Stainless

323527

323517

------

Hinge Pin

Stainless

323818

323516

323845

Name Plate

Aluminum

323480

323847

Drive Screws (2)

Stainless

323520

323420

**Cover Gasket

Vellumoid

323810

323508

323568

323833

Torsion Spring

Stainless

323528

323565

------

Clapper Facing Disc

EPDM

323815

323511

323571

323842

Spring Bushing

Brass

------

323579

------

Refer to Globe's Alarm Check Valve Installation and Maintenance Guide (Bulletin A.C.V.I.M.) for trim set-up, installation instructions, and maintenance. *8 Inch Clapper material is Bronze **8 Inch Cover Gasket material is Rubber

ORDERING INFORMATION

SPECIFY Quantity Model Number Size Pressure Rating Factory Trimmed and Leak Tested Hydrostatically or Loose Trim for Customer Installation.

GLOBE速 PRODUCT WARRANTY

JULY 2012

PRINTED U.S.A. www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN ACV-HP

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 800-846-9211 www.globesprinkler.com OCTOBER 2012

C-5 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Globe Alarm Check Valves General Description Physical Data

1 2

3", 4" & 6" Alarm Check Valve Assembly and Parts List 8" Alarm Check Valve Assembly and Parts List

3 3

3" Model "H" Series Vertical Position/Variable Pressure Trim 3" Model "H" Series Vertical Position/Constant Pressure Trim 3" Model "H" Series Horizontal Position/Variable Pressure Trim 3" Model "H" Series Horizontal Position/Constant Pressure Trim

6-7 8-9 10-11 12-13

4" Model "H" Series Vertical Position/Variable Pressure Trim 4" Model "H" Series Vertical Position/Constant Pressure Trim 4" Model "H" Series Horizontal Position/Variable Pressure Trim 4" Model "H" Series Horizontal Position/Constant Pressure Trim

14-15 16-17 18-19 20-21

6" Model "H" Series Vertical Position/Variable Pressure Trim 6" Model "H" Series Vertical Position/Constant Pressure Trim 6" Model "H" Series Horizontal Position/Variable Pressure Trim 6" Model "H" Series Horizontal Position/Constant Pressure Trim

22-23 24-25 26-27 28-29

8" Model "H" Series Vertical Position/Variable Pressure Trim 8" Model "H" Series Vertical Position/Constant Pressure Trim

30-31 32-33

Optional Alarm Pressure Switch Trim Pressure Relief Valve for use in Gridded Systems Testing Maintenance

OCTOBER 2012

34 34 4 5

Page i www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE GENERAL DESCRIPTION Globe Fire Sprinkler Corporation Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through the use of a hydraulic retard chamber a time delay is provided to eliminate potential false alarms caused by fluctuating water supply pressures. Where constant pressure water supplies are used the retard chamber (time delay) is not necessary. By incorporating the use of electrical pressure switches, other supplemental alarms, annunciators, etc. may also be used. Globe Alarm Check Valves are designed and manufactured to the standards and/or requirements of Underwriters Laboratories Inc., Factory Mutual Approvals, The Loss Prevention Certification Board and the City of New York Department of Buildings, and they conform to the design/usage requirements of NFPA 13.

IMPORTANT NOTES 1. Any alarm check valve should be carefully tested, examined, and cleaned periodically in accordance with NFPA 25. 2. It is most important to ensure a clean water supply free of debris and solid particles such as sand, gravel, or mud. 3. If, during the annual inspection of alarm check valves, sediment or free particles of matter are noted, a further examination of internal valve parts becomes necessary. 4. All deposits should be removed from all operating parts and ports. Vent holes through seat ring, Items 3 and 2 (Page 4), should be throroughly cleaned and flushed with clean water. 5. Where difficulty in performance is experienced, the manufacturer or his authorized representative shall be contacted if any field adjustment is to be made.

OCTOBER 2012

Page 1 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE VERTICAL / VARIABLE H-1

MODEL SIZE Overall Length Center of Valve to Back Center of Valve to Right Center of Valve to Left

H-2

H-3

10"

14"

10"

12"

15"

9 1/4"

9 1/2"

11"

13 5/8"

10"

11"

12"

13"

10"

11"

12 1/2"

12"

10"

11"

12"

13"

17"

13 1/2" 16 1/2" 16 1/2" 16 1/2" 13 1/2" 16 1/2"

13 1/2" 16 1/2" 16 1/2" 16 1/2"

8 1/4"

Center of Valve to Center of Drain

9 1/4"

8 3/4"

9 1/4"

8 3/4"

Weight of Valve Complete with all Trimmings

34 lbs. 81 lbs.

42 lbs. 69 lbs. 147 lbs. 20 lbs. 89 lbs. 114 lbs. 198 lbs. 57 lbs.

22 lbs. 69 lbs.

46 lbs. 106 lbs. 28 lbs. 95 lbs. 157 lbs. 75 lbs.

37 lbs. 59 lbs. 130 lbs. 84 lbs. 100 lbs. 180 lbs.

VERTICAL / CONSTANT H-1

MODEL SIZE

H-2

H-3

Overall Length

10"

14"

10"

12"

15"

9 1/4"

9 1/2"

11"

13 5/8"

Center of Valve to Back

10"

8 3/4"

9 3/4"

12 1/4"

10"

8 3/4"

10"

12"

10"

8 3/4"

9 3/4"

12 1/4"

Center of Valve to Right Center of Valve to Left

13 1/2" 15 1/2" 16 1/4"

17"

13 1/2" 15 1/2"

17"

17 3/4" 13 1/2" 15 1/2" 16 1/4"

17"

7 1/2"

8 1/2"

8 3/4"

7 1/2"

Center of Valve to Center of Drain

9 1/4"

8 3/4"

9 1/2"

9 1/4"

8 3/4"

9 1/2"

Weight of Valve Complete with all Trimmings

34 lbs. 56 lbs.

42 lbs. 64 lbs.

69 lbs. 147 lbs. 20 lbs. 89 lbs. 174 lbs. 57 lbs.

22 lbs. 44 lbs.

46 lbs. 106 lbs. 28 lbs. 71 lbs. 132 lbs. 50 lbs.

37 lbs. 59 lbs.

59 lbs. 130 lbs. 75 lbs. 156 lbs.

HORIZONTAL / VARIABLE H-1

MODEL SIZE Overall Length

H-2

H-3

10"

N/A

10"

12"

N/A

9 1/4"

9 1/2"

11"

N/A

7 1/2"

N/A

7 1/2"

10 1/4" 20 1/2"

Center of Valve to Back

7 1/2"

10 1/4" 20 1/2"

10 1/4" 10 1/2"

N/A

Center of Valve to Right

17 1/2"

17"

18 1/2"

N/A

17 1/2"

17"

20 1/2"

N/A

17 1/2"

17"

18 1/2"

N/A

Center of Valve to Left

7 1/4"

8 1/2"

12"

N/A

7 1/4"

8 1/2"

10"

N/A

7 1/4"

8 1/2"

12"

N/A

Center of Valve to Center of Drain

9 1/2"

13 1/2"

14"

N/A

9 1/2"

13 1/2" 13 3/4"

N/A

9 1/2"

13 1/2"

14"

N/A

Weight of Valve Complete with all Trimmings

34 lbs. 89 lbs.

42 lbs. 69 lbs. 97 lbs. 122 lbs.

N/A

20 lbs. 70 lbs.

22 lbs. 46 lbs. 82 lbs. 100 lbs.

N/A

28 lbs. 83 lbs.

37 lbs. 59 lbs. 92 lbs. 113 lbs.

N/A

HORIZONTAL / CONSTANT H-1

MODEL SIZE

H-2

H-3

10"

N/A

10"

12"

N/A

9 1/4"

9 1/2"

11"

N/A

Center of Valve to Back

7 1/2"

10"

19 1/2"

N/A

7 1/2"

10"

11"

N/A

7 1/2"

10"

19 1/2"

N/A

Center of Valve to Right

17 1/2" 16 1/2" 15 1/2"

N/A

17 1/2" 16 1/2" 19 1/2"

N/A

17 1/2" 16 1/2" 15 1/2"

N/A

Center of Valve to Left

7 1/4"

8 3/4"

N/A

7 1/4"

N/A

7 1/4"

8 3/4"

N/A

Center of Valve to Center of Drain

12 1/4" 13 1/2"

14"

N/A

12 1/4" 13 1/2" 12 3/4"

N/A

12 1/4" 13 1/2"

14"

N/A

Weight of Valve Complete with all Trimmings

34 lbs. 60 lbs.

69 lbs. 94 lbs.

N/A

20 lbs. 70 lbs.

N/A

28 lbs. 54 lbs.

59 lbs. 85 lbs.

N/A

Overall Length

OCTOBER 2012

8 1/2"

42 lbs. 68 lbs.

8 1/2"

22 lbs. 53 lbs.

10"

46 lbs. 74 lbs.

Page 2 www.globalfire.com.co - PBX: (+571) 898.54.55

8 1/2"

37 lbs. 63 lbs.

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 3”, 4” & 6” Alarm Check Valve Assembly 7

3 10

FRONT VIEW ITEM

DESCRIPTION "H-"1 Body

MAT'L

TOP VIEW

3" [80mm] 4" [100mm] 6" / 150mm P/N P/N P/N

Cast Iron

323803

ITEM

3" [80mm] P/N

4" [100mm] P/N

6" / 150mm P/N

EPDM

323815

323511

323571

323502

323562

Disc Retainer

Stainless

323816

323512

323572

Lock Nut

Stainless

323514

"H-2" Body

Cast Iron*

323827

323552

323666/ 323666-D

"H-3" Body

Cast Iron

323807

323542

323592

MAT'L

DESCRIPTION Clapper Facing Disc

Cover Bolt

Steel

323408

323509

323569

Disc Retainer Bolt

Seat Ring

Bronze

323809

323504

323564

Sealing Washer

Stainless

323817

323513

323573

Hard Fiber

323515

323515 323518

Cover

Cast Iron*

323805

323507

323567

Hinge Pin Bushings (2)

Bronze

323819

323518

Clapper

Stainless

323814

323510

323507

Name Plate

Aluminum

323480

Retaining Ring

Stainless

323527

323517

Drive Screws (2)

Stainless

323520

Hinge Pin

Stainless

323818

323516

Torsion Spring

Stainless

323528

323565

Cover Gasket

Vellumoid

323810

323508

323568

Spring Bushing

Brass

------

323579

*DUCTILE IRON FOR 300psi (25bars) RATED VALVES

8” Alarm Check Valve Assembly 1 11 10

11 6 7 5

3 2

FRONT VIEW ITEM

TOP VIEW

MAT'L

P/N

ITEM

"H-"1 Body

Cast Iron

323832

"H-2" Body

Cast Iron*

323858

Disc Retainer

Stainless

323843

"H-3" Body

Cast Iron

323851

Disc Retainer Bolt

Stainless

323838

Cover

Cast Iron*

323835

Hinge Pin

Stainless

323845

Cover Gasket

Rubber

323833

Hinge Pin Bushings (2)

Bronze

323846

Cover Bolts (6)

Steel

323839

175psi Name Plate

Aluminum

323847

Seat Ring

Bronze

323837

300psi Name Plate

Aluminum

323787

Clapper

Bronze

323841

Drive Screws (2)

Stainless

323420

DESCRIPTION

12 13

DESCRIPTION Clapper Disc

MAT'L

P/N

EPDM

323842

*DUCTILE IRON FOR 300psi (25bars) RATED VALVES

OCTOBER 2012

Page 3 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE Testing and Maintenance

Flow Test at Main Drain Valve (Main Drain Test)

Reference NFPA 25, Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems.

NFPA 25 recommends that a water flow test be made quarterly from the main drain valve at the system riser. The purpose of this test is to show whether or not the normal water supply is available to the system. By comparing static and residual pressure readings with those previously established, a main drain test can indicate the possible presence of closed valves or other obstructions in the supply piping. The procedure for conducting a Main Drain Test is as follows:

TESTING Before proceeding with any tests involving water flow, certain precautions need to be taken. 1. Check the location where the test connection discharges to make sure that all is clear and that there is no possibility of the water flow causing damage or injury. 2. Check the end of the test connection to make sure that it is unobstructed. To obtain a satisfactory test, there must be an unrestricted flow of water when the test valve is wide open. 3. Check for alarm connections to a central station or fire department. If such connections are found, give proper notice to the signal receiving station before proceeding with the test. Note: A main drain test will also operate local fire alarms unless they are temporarily shut off.

1. With the Main Drain Valve closed, note and record the reading on the lower Pressure Gauge at the Alarm Valve. 2. Open the Main Drain Valve slowly until it is wide open. Then, check to make sure that a full steady flow of water is discharging from the main drain pipe. Note: If a full steady stream is not discharging, check the main drain piping further for possible obstructions. 3. Allow the water to flow until the reading on the lower Pressure Gauge drops and stabilizes. Then, record this reading.

Testing Alarm Valve and Waterflow Alarm Devices NFPA 25 recommends that the alarm valve and its waterflow alarm devices be tested at least quarterly. The primary way to test this equipment is by opening the Inspectors Test Connection. This connection, generally located at the highest and most remote point on the system in relation to the alarm valve, consists of a test orifice and controlling globe valve. Opening of the globe valve (Inspectors Test Valve), and the subsequent discharge of water through the test orifice, simulates the operation of a sprinkler. Therefore, alarm devices should sound and/or operate when the Inspectors Test Valve is opened. An alternate means of testing waterflow alarm devices is to open the Alarm Test Valve provided as part of the alarm valve trim. It must be noted, however, that opening of this valve only tests the alarms; it does not test the operation of the alarm valve since the supply for the alarm test line is taken from a point below the alarm valve clapper (see respective trim drawings). This means of testing, therefore, should only be used when weather conditions or other circumstances prohibit using the Inspectors Test Connection.

Note: The first and higher pressure reading is the static pressure. The second, lower reading is the residual pressure with a given flow discharging from the main drain pipe. 4. Close the Main Drain Valve slowly. Caution: If alarms have been temporarily shut off, they must be returned to service. If alarms connect to a central station or fire department, notify the signal receiving station when the test has been completed. 5. Compare both pressure readings with previously established or normal readings. Note: If the readings compare favorably, the water supply may be considered satisfactory. If, however, the pressure readings vary to any great extent, the condition should be investigated to determine the cause. Some possible causes are: Partially or totally closed system control valves. Clogged or frozen water mains. Serious leakage at valves or mains.

Note: If alarms connect to a central station or fire department, notify the signal receiving station when all tests have been completed.

OCTOBER 2012

Page 4 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE MAINTENANCE

2. Close the Alarm Control Valve.

The Globe Alarm Check Valve and its related equipment should be examined periodically to ensure proper operation and trouble-free service. Several areas to be routinely inspected are: Clapper Facing. The rubber clapper facing should be checked for wear or damage, and to determine that it is free of dirt and other foreign substances. If found to be worn or damaged (e.g., foreign matter imbedded in the surface), the facing should be replaced. If it is dirty, it should be cleaned, but compounds which could damage the rubber facing must never be used. Seat Ring. The seat ring should be checked for nicks and for stones, dirt or other foreign matter lodged in the grooves or holes. It should be cleaned thoroughly. If the seat ring is found to be severely damaged, the complete alarm valve assembly should be replaced or returned to Globe for possible reconditioning. By-Pass Check Valve. The 他" check valve in the external by-pass should be checked for clapper and seat condition.

3. Open the Main Drain Valve. Note: It is necessary to drain the system only as required to allow for sprinkler replacement. 4. Replace the sprinklers which have operated. 5. Close the Main Drain Valve 6. Open the Inspectors Test Valve. Note: This valve is opened to permit air to be vented from the system as it is being filled with water. 7. Slowly open the System Control Valve. Caution: Open the valve only partially at the start of water flow into the system. Do not open it fully at this point. To do so may cause a water hammer to occur which could either damage the piping or trap large volumes of air within the system.

Retard Chamber. The outlet plug and drain plug assemblies should be checked for obstructions. The screens should be cleaned thoroughly.

8. Continue filling the system until water discharges in a continuous stream from the Inspectors Test Connection.

Alarm Line Strainer. The 他" stainer in the alarm line of the constant pressure trim setup should be checked and cleaned thoroughly.

9. Close the Inspectors Test Valve.

Alarm Test Valve, Main Drain Valve & Inspectors Test Valve. All controlling valves which are normally closed when the alarm valve is in the set position should be checked to be sure that they are fully closed and not leaking. Alarm Valve & Trim. The overall setup should be checked for visible leaks and possible physical damage to the valve and connections (e.g., broken gauges). Resetting of System The Globe Alarm Check Valve is self-setting when testing procedures are followed. When sprinklers operate, however, there are certain procedures which must be followed for restoring the system to service. 1. Close the System Control Valve (OS & Y, PIV or other). Caution: In the event of a fire, the system control valve is to be closed only after it has been determined, positively, that the fire has been extinguished.

OCTOBER 2012

10. Turn the System Control Valve to its full open position, at the same time observing the Pressure Gauges. Note: The system is filled when both gauges are steady and have the same pressure reading. 11. Conduct a Main Drain Test to make sure the water supply is satisfactory (see Flow Test at Main Drain Valve). 12. Open the Alarm Control Valve. 13. Conduct a test of the alarm devices (see Testing Alarm and Waterflow Alarm Devices). 14. Seal, lock, or otherwise secure the System Control Valve and Alarm Control Valve in an open position (per NFPA 25). The system is now ready for service. 15. If alarms connect to a central station or fire department, notify the signal receiving station that the system has been returned to service.

Page 5 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 3" MODEL “H” SERIES VERTICAL POSITION / VARIABLE PRESSURE TRIM 1

3 1

102

67 5

64 67 21

46 1

70 21

106 1

73 83

VALVE ONLY MODEL "H-1" 323800 MODEL "H-2" 323825 MODEL "H-3" 323801 TRIM ONLY 323769

Description

Part No.

Req'd.

Det. No.

4 23 111

VALVE FACTORY TRIMMED MODEL "H-1" 323757 MODEL "H-2" 323761 MODEL "H-3" 323765

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" x 3" Nipple

310304

1/2" Close Galv. Nipple

310300-G

1/2" Tee

311303

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2" Galv. Nipple

310302-G

310313-G

311616

1/2" Close Nipple

310300

1/2" x 3 1/2" Nipple

310305

1/2" x 7 1/2" Galv. Nipple

1/2" Ball Valve

311692

1/2" x 1 1/2" Nipple

310301

1 1/2" Angle Valve

1/4" 3-Way Valve

311683

1/2" x 4" Nipple

310306

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/4" Plug

311001

Retard Chamber

323350

102

1/4" x 1 1/2" Nipple

310101

1/2" x 2" Nipple

310302

1/4" x 4" Nipple

310106

106

1 1/2" x 3 1/2" Nipple

310704

1/2" Swing Check Valve

311639

1/2" x 1/4" x 1/2" Tee

311305

111

1 1/2" x 2 1/2" Nipple

310702

1/2" Union

311403

OCTOBER 2012

Page 6 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 3" MODEL “H-2” VERTICAL POSITION / VARIABLE PRESSURE TRIM 1

31 31

70 3

1 16

4 102 67

5 20

4 3

33 4

1 1 106

1 1

VALVE ONLY MODEL "H-2" 323825-HP TRIM ONLY 323769-HP VALVE FACTORY TRIMMED MODEL "H-2" 323761-HP

111

86 4

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" x 3" Nipple

310304

1/2" Close Galv. Nipple

310300-G

1/2" Tee

311303

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2" Galv. Nipple

310302-G

1/2" Close Nipple

310300

1/2" x 3 1/2" Nipple

310305

1/2" x 7 1/2" Galv. Nipple

310313-G

1/2" Ball Valve

311692

1/2" x 1 1/2" Nipple

310301

1 1/2" Angle Valve

311616

1/4" 3-Way Valve

311683

1/2" x 4" Nipple

310306

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/4" Plug

311001

Retard Chamber

323350

102

1/4" x 1 1/2" Nipple

310101

1/2" x 2" Nipple

310302

1/4" x 4" Nipple

310106

106

1 1/2" x 3 1/2" Nipple

310704

1/2" Swing Check Valve

311639

1/2" x 1/4" x 1/2" Tee

311305

111

1 1/2" x 2 1/2" Nipple

310702

1/2" Union

311403

OCTOBER 2012

Page 7 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 3" MODEL “H” SERIES VERTICAL POSITION / CONSTANT PRESSURE TRIM 1 31

70 5

70 15

102

103 36

4 67

4 4

35 67

74 19

70 1

106 73

83 1 VALVE ONLY MODEL "H-1" 323800 MODEL "H-2" 323825 MODEL "H-3" 323801

4 101

TRIM ONLY 323770

Description

Part No.

Req'd.

4 21

VALVE FACTORY TRIMMED MODEL "H-1" 323758 MODEL "H-2" 323762 MODEL "H-3" 323766

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 7 1/2" Galv. Nipple

310313-G

1/2" Tee

311303

3 1/2" Water Gauge (0-300psi)

300119

1 1/2" Angle Valve

311616

1/2" Close Nipple

310300

1/2" Coupling

311423

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

310305

1/2" x 10" Nipple

310320

1/4" 3-Way Valve

311683

Alarm Line Bleeder

320506

101

1 1/2" Close Nipple

310700

1/4" Plug

311001

3/4" Strainer

325535

102

1/4" x 1 1/2" Nipple

310101

1/2" x 2" Nipple

310302

1/2" x 1/4" x 1/2" Tee

311305

103

3/4" Close Galv. Nipple

1/2" Swing Check Valve

311639

1/2" Close Galv. Nipple

310300-G

106

1 1/2" x 3 1/2" Nipple

1/2" Union

311403

1/2" x 2" Galv. Nipple

310302-G

OCTOBER 2012

Page 8 www.globalfire.com.co - PBX: (+571) 898.54.55

310400-G

310704

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 3" MODEL “H-2” VERTICAL POSITION / CONSTANT PRESSURE TRIM 1

70 5

103

4 102

4 15

35 4

4 33

21 74

106 73

VALVE ONLY MODEL "H-2" 323825-HP TRIM ONLY 323770-HP

4 101

VALVE FACTORY TRIMMED 323762-HP

4 21

86 4

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

1/2" Elbow

311203

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 7 1/2" Galv. Nipple

1/2" Tee

311303

3 1/2" Water Gauge (0-300psi)

300119

1 1/2" Angle Valve

Part No.

Req'd.

310313-G

311616

1/2" Close Nipple

310300

1/2" Coupling

311423

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

310305

1/2" x 10" Nipple

310320

1/4" 3-Way Valve

311683

Alarm Line Bleeder

320506

101

1 1/2" Close Nipple

310700

1/4" Plug

311001

3/4" Strainer

325535

102

1/4" x 1 1/2" Nipple

310101

1/2" x 2" Nipple

310302

1/2" x 1/4" x 1/2" Tee

311305

103

3/4" Close Galv. Nipple

310400-G

1/2" Swing Check Valve

311639

1/2" Close Galv. Nipple

310300-G

106

1 1/2" x 3 1/2" Nipple

310704

1/2" Union

311403

1/2" x 2" Galv. Nipple

310302-G

OCTOBER 2012

Page 9 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 3" MODEL “H” SERIES HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY MODEL "H-1" 323800 MODEL "H-2" 323825 MODEL "H-3" 323801 1

TRIM ONLY 323767 VALVE FACTORY TRIMMED MODEL "H-1" 323755 MODEL "H-2" 323759 MODEL "H-3" 323763 31

110

70 83

163

73 31

4 19

70 21

15 16

70 1

67 15

109

107 23

16 67

3 33 21

1 4 86

Det. No.

Description

Part No.

Req'd.

Det. No.

1/2" Union

Description

Part No.

Req'd.

Det. No.

311403

Description

Part No.

Req'd.

1/2" x 2" Galv. Nipple

310302-G

310313-G

311616

1/2" Elbow

311203

1/2" Tee

311303

1/2" x 3" Nipple

310304

1/2" x 7 1/2" Galv. Nipple

1/2" Close Nipple

310300

3 1/2" Water Gauge (0-300psi)

300119

1 1/2" Angle Valve

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

310305

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/4" 3-Way Valve

311683

1/4" x 6" Nipple

310110

107

1 1/2" x 4 1/2" Nipple

310706

1/4" Plug

311001

Retard Chamber

323350

109

1/4" x 3 1/2" Nipple

310105

1/2" x 2" Nipple

310302

1/2" x 1/4" x 1/2" Tee

311305

110

1 1/2" x 8" Nipple

310715

1/2" Swing Check Valve

311639

1/2" Close Galv. Nipple

310300-G

163

1/2" x 12 1/2" Galv. Nipple

310338-G

OCTOBER 2012

Page 10 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 3" MODEL “H-2” HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY MODEL "H-2" 323825-HP TRIM ONLY 323767-HP

VALVE FACTORY TRIMMED MODEL "H-2" 323759-HP

163

31 31

110

4 19

70 21

15 16

70 1

67 15

109

107 23

16 67

3 33 21

1 4 86

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Union

311403

1/2" x 2" Galv. Nipple

310302-G

1/2" Tee

311303

1/2" x 3" Nipple

310304

1/2" x 7 1/2" Galv. Nipple

310313-G

1/2" Close Nipple

310300

3 1/2" Water Gauge (0-300psi)

300119

1 1/2" Angle Valve

311616

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

310305

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/4" 3-Way Valve

311683

1/4" x 6" Nipple

310110

107

1 1/2" x 4 1/2" Nipple

310706

1/4" Plug

311001

Retard Chamber

323350

109

1/4" x 3 1/2" Nipple

310105

1/2" x 2" Nipple

310302

1/2" x 1/4" x 1/2" Tee

311305

110

1 1/2" x 8" Nipple

310715

1/2" Swing Check Valve

311639

1/2" Close Galv. Nipple

310300-G

163

1/2" x 12 1/2" Galv. Nipple

310338-G

OCTOBER 2012

Page 11 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 3" MODEL “H” SERIES HORIZONTAL POSITION / CONSTANT PRESSURE TRIM VALVE ONLY MODEL "H-1" 323800 MODEL "H-2" 323825 MODEL "H-3" 323801 TRIM ONLY 323768 VALVE FACTORY TRIMMED MODEL "H-1" 323756 MODEL "H-2" 323760 MODEL "H-3" 323764 31

108

21 16

70 16

15 4

42 15

109

103 36

35 46

107

86 21 4

Det. No.

Part No.

Req'd.

Det. No.

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

3/4" x 1/2" x 1/2" Tee

311318

1/2" Tee

311303

1/2" Close Nipple

310300

3 1/2" Water Gauge (0-300psi)

300119

1/2" Coupling

311423

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

1/4" 3-Way Valve

1/4" Plug

311683

311001

1/2" x 2" Nipple

310302

1/2" Swing Check Valve

311639

1/2" Union

311403

Description

OCTOBER 2012

Description

Part No.

Req'd.

1/2" Close Galv. Nipple

310300-G

1/2" x 2" Galv. Nipple

310302-G

1/2" x 7 1/2" Galv. Nipple

310313-G

310305

1 1/2" Angle Valve

311616

Alarm Line Bleeder

320506

103

3/4" Close Galv. Nipple

310400-G

3/4" Strainer

325535

107

1 1/2" x 4 1/2" Nipple

310706

1/2" x 1 1/2" Nipple

310301

108

1 1/2" x 6" Nipple

310709

1/4" x 6" Nipple

310110

109

1/4" x 3 1/2" Nipple

310105

1/2" x 1/4" x 1/2" Tee

311305

Page 12 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 3" MODEL “H-2” HORIZONTAL POSITION / CONSTANT PRESSURE TRIM

VALVE ONLY MODEL "H-2" 323825-HP TRIM ONLY 323768-HP

108

VALVE FACTORY TRIMMED 323760-HP 31

21 16

70 16

74 70

42 4

70 5

109

103 36

35 46

107 37

33 1

20 4

86 21 4

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

Description

Part No.

Req'd.

Det. No.

3/4" x 1/2" x 1/2" Tee

311318

Description

Part No.

Req'd.

1/2" Close Galv. Nipple

310300-G

1/2" Tee

311303

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2" Galv. Nipple

310302-G

1/2" Close Nipple

310300

1/2" Coupling

311423

1/2" x 7 1/2" Galv. Nipple

310313-G

1/2" Ball Valve

311692

1/2" x 3 1/2" Nipple

310305

1 1/2" Angle Valve

311616

1/4" 3-Way Valve

311683

Alarm Line Bleeder

320506

103

3/4" Close Galv. Nipple

310400-G

1/4" Plug

311001

3/4" Strainer

325535

107

1 1/2" x 4 1/2" Nipple

310706

1/2" x 2" Nipple

310302

1/2" x 1 1/2" Nipple

310301

108

1 1/2" x 6" Nipple

310709

1/2" Swing Check Valve

311639

1/4" x 6" Nipple

310110

109

1/4" x 3 1/2" Nipple

310105

1/2" Union

311403

1/2" x 1/4" x 1/2" Tee

311305

OCTOBER 2012

Page 13 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 4" MODEL “H” SERIES VERTICAL POSITION / VARIABLE PRESSURE TRIM 1 70

31 31

16 71 1

15 16

122

6 45

13 12

41 6

122

7 18

12 17 21

22 25

VALVE ONLY MODEL "H-1" 323500 MODEL "H-2" 323550 MODEL "H-3" 323540 TRIM ONLY 323530

VALVE FACTORY TRIMMED MODEL "H-1" 323525 MODEL "H-2" 323555 MODEL "H-3" 323545

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

3/4" Union

311404

1/4" x 2" Nipple

310103

1/2" Tee

311303

3/4" x 2 1/2" Nipple

310402

3/4" x 1 1/2" Nipple

310413

1/2" Close Nipple

310300

1/2" x 2" Nipple

310302

1/4" x 5" Nipple

310108

1/2" Ball Valve

311692

1/2" Swing Check Valve

311639

Retard Chamber

323350

3/4" x 1/2" x 3/4" Tee

311313

1/2" Union

311403

1/2" x 1/4" x1/2" Tee

311305

3/4" x 3" Nipple

310403

2" x 3" Nipple

310802

1/2" Close Galv. Nipple

310300-G

3/4" Elbow

311204

3/4" x 4 1/2" Nipple

310406

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Close Nipple

310400

2" Angle Valve

311617

1/2" x 8 1/2" Galv. Nipple

310316-G

3/4" Swing Check Valve

311640

2" x 2" x 1/2" Tee

311380

1/2" x 4 1/2" Nipple

310307

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

122

1/2" x 1/4" Reducing Bushing

311100

1/4" Plug

311001

1/2" x 1 1/2" Nipple

310301

OCTOBER 2012

Page 14 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 4" MODEL “H-2” VERTICAL POSITION / VARIABLE PRESSURE TRIM 1 70

31 31

16 71 1

15 16

38 122

5 13

6 45

159

41 6

122

7 6

18 17 21

22 25

VALVE ONLY MODEL "H-2" 323550-HP

TRIM ONLY 323530-HP VALVE FACTORY TRIMMED MODEL "H-2" 323555-HP

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

311404

Description

Req'd.

310103

1/2" Elbow

311203

3/4" Union

1/2" Tee

311303

3/4" x 2 1/2" Nipple

310402

3/4" x 1 1/2" Nipple

310413

1/2" Close Nipple

310300

1/2" x 2" Nipple

310302

1/4" x 5" Nipple

310108

1/2" Ball Valve

311692

1/2" Swing Check Valve

311639

Retard Chamber

323350

3/4" x 1/2" x 3/4" Tee

311313

1/2" Union

311403

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 3" Nipple

310403

2" x 3" Nipple

310802

1/2" Close Galv. Nipple

310300-G

3/4" Elbow

311204

3/4" x 4 1/2" Nipple

310406

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Close Nipple

310400

2" Angle Valve

311617

1/2" x 8 1/2" Galv. Nipple

310316-G

3/4" Swing Check Valve

311640

2" x 2" x 1/2" Tee

311380

1/2" x 4 1/2" Nipple

310307

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

122

1/2" x 1/4" Reducing Bushing

311100

1/4" Plug

311001

1/2" x 1 1/2" Nipple

310301

159

ø.437 Restricted Orifice Union

311410

OCTOBER 2012

Page 15 www.globalfire.com.co - PBX: (+571) 898.54.55

1/4" x 2" Nipple

Part No.

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 4" MODEL “H” SERIES VERTICAL POSITION / CONSTANT PRESSURE TRIM 1 31 31

70 30

103

122

5 12

15 12 17

37 35

122

74 24 8

17 18

1 71

70 25

VALVE ONLY MODEL "H-1" 323500 MODEL "H-2" 323550 MODEL "H-3" 323540 TRIM ONLY 323531

58 16

VALVE FACTORY TRIMMED MODEL "H-1" 323526 27 MODEL "H-2" 323556 MODEL "H-3" 323546

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

3/4" x 2 1/2" Nipple

Description

Part No.

Req'd.

Det. No.

310402

Description 3/4" Strainer

Part No.

Req'd.

325535

1/2" Tee

311303

1/2" Swing Check Valve

311639

1/2" x 1 1/2" Nipple

310301

1/2" Close Nipple

310300

1/2" Union

311403

1/4" x 2" Nipple

310102

1/2" Ball Valve

311692

2" x 3" Nipple

310802

3/4" x 1 1/2" Nipple

310413

3/4" x 1/2" x 3/4" Tee

311313

3/4" x 4 1/2" Nipple

310406

1/4" x 5" Nipple

310108

3/4" x 3" Nipple

310403

2" Angle Valve

311617

2" x 2 1/2" Nipple

310801

3/4" Elbow

311204

2" x 2" x 1/2" Tee

311380

1/2" x 1/4" x 1/2" Tee

311305

3/4" Close Nipple

310400

3/4" x 1/2" x 1/2" Tee

311318

1/2" Close Galv. Nipple

310300-G

3/4" Swing Check Valve

311640

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 1 1/2" Galv. Nipple

310301-G

1/4" 3-Way Valve

311683

1/2" Coupling

311423

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

1/2" x 12" Nipple

310318

103

3/4" Close Galv. Nipple

310400-G

3/4" Union

311404

Alarm Line Bleeder

320506

122

1/2" x 1/4" Reducing Bushing

311100

OCTOBER 2012

Page 16 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 4" MODEL “H-2” VERTICAL POSITION / CONSTANT PRESSURE TRIM 1 31 31

70 30

103

122 45

37 6

5 12

15 12 159

37 35

122

74 24 8

17 18

1 71

70 25

VALVE ONLY MODEL "H-2" 323550-HP TRIM ONLY 323531-HP VALVE FACTORY TRIMMED MODEL "H-2" 323556-HP

58 16 20

27 4

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Swing Check Valve

311639

1/2" x 1 1/2" Nipple

310301

1/2" Tee

311303

1/2" Union

311403

1/4" x 2" Nipple

310102

1/2" Close Nipple

310300

2" x 3" Nipple

310802

3/4" x 1 1/2" Nipple

310413

1/2" Ball Valve

311692

3/4" x 4 1/2" Nipple

310406

1/4" x 5" Nipple

310108

3/4" x 1/2" x 3/4" Tee

311313

2" Angle Valve

311617

2" x 2 1/2" Nipple

310801

3/4" x 3" Nipple

310403

2" x 2" x 1/2" Tee

311380

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

3/4" x 1/2" x 1/2" Tee

311318

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

1/2" Coupling

311423

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" 3-Way Valve

311683

1/2" x 12" Nipple

310318

103

3/4" Close Galv. Nipple

310400-G

1/4" Plug

311001

Alarm Line Bleeder

320506

122

1/2" x 1/4" Reducing Bushing

311100

3/4" Union

311404

3/4" Strainer

325535

159

ø.437 Restricted Orifice Union

311410

3/4" x 2 1/2" Nipple

310402

OCTOBER 2012

Page 17 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 4" MODEL “H” SERIES HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY MODEL "H-1" 323500 MODEL "H-2" 323550 MODEL "H-3" 323540

TRIM ONLY 323535

VALVE FACTORY TRIMMED MODEL "H-1" 323527 MODEL "H-2" 323627 MODEL "H-3" 323538

5 70 1

75 60

71 59

28 17

122

11 12 12

1 12

122

6 20

7 8

39 21 27

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd. 1

1/2" Elbow

311203

3/4" x 2 1/2" Nipple

310402

3/4" x 1 1/2" Nipple

310413

1/2" Tee

311303

1/2" Swing Check Valve

311639

1/4" x 6" Nipple

310110

1/2" Close Nipple

310300

1/2" Union

311403

Retard Chamber

323350

1/2" Ball Valve

311692

3/4" x 4 1/2" Nipple

310406

1/4" Coupling

311402

3/4" x 1/2" x 3/4" Tee

311313

2" Angle Valve

311617

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 3" Nipple

310403

2" x 5" Nipple

310803

2" x 7 1/2" Nipple

310809

3/4" Elbow

311204

2" x 2" x 1/2" Tee

311380

1/2" Close Galv. Nipple

310300-G

1/4" x 6 1/2" Nipple

310115

1/4" Elbow

311201

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Close Nipple

310400

1/4" x 10" Nipple

310136

1/2" x 2 1/2" Galv. Nipple

310303-G

3/4" Swing Check Valve

311640

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" 3-Way Valve

311683

1/2" x 1 1/2" Nipple

310301

1/2" x 12" Galv. Nipple

310318-G

1/4" Plug

311001

1/2" x 2 1/2" Nipple

310303

122

1/2" x 1/4" Reducing Bushing

311100

3/4" Union

311404

OCTOBER 2012

Page 18 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 4" MODEL “H-2” HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY MODEL "H-2" 323550-HP

TRIM ONLY 323535-HP

VALVE FACTORY TRIMMED MODEL "H-2" 323535-HP 16

70 1

75 60

28 159

122

11 12 12

1 12

12 37

122 6

6 20

7 8

39 21 27

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

310402

Description

Part No.

Req'd.

1/4" x 6" Nipple

310110

1/2" Elbow

311203

3/4" x 2 1/2" Nipple

1/2" Tee

311303

1/2" Swing Check Valve

311639

Retard Chamber

323350

1/2" Close Nipple

310300

1/2" Union

311403

1/4" Coupling

311402

1/2" Ball Valve

311692

3/4" x 4 1/2" Nipple

310406

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 1/2" x 3/4" Tee

311313

2" Angle Valve

311617

2" x 7 1/2" Nipple

310809

3/4" x 3" Nipple

310403

2" x 5" Nipple

310803

1/2" Close Galv. Nipple

310300-G

3/4" Elbow

311204

2" x 2" x 1/2" Tee

311380

1/2" x 1 1/2" Galv. Nipple

310301-G

1/4" x 6 1/2" Nipple

310115

1/4" Elbow

311201

1/2" x 2 1/2" Galv. Nipple

310303-G

3/4" Close Nipple

310400

1/4" x 10" Nipple

310136

1/2" x 8 1/2" Galv. Nipple

310316-G

3/4" Swing Check Valve

311640

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 12" Galv. Nipple

310318-G

1/4" 3-Way Valve

311683

1/2" x 1 1/2" Nipple

310301

122

1/2" x 1/4" Reducing Bushing

311100

1/4" Plug

311001

1/2" x 2 1/2" Nipple

310303

159

ø.437 Restricted Orifice

311410

3/4" Union

311404

3/4" x 1 1/2" Nipple

310413

OCTOBER 2012

Page 19 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 4" MODEL “H” SERIES HORIZONTAL POSITION / CONSTANT PRESSURE TRIM

31 16

16 42

31 60

71 71

21 29

41 74

17 28

12 11

69 25

17 122

5 70

103 36

37 24

5 21 26

VALVE FACTORY TRIMMED MODEL "H-1" 323529 MODEL "H-2" 323628 MODEL "H-3" 323539

8 27

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

Description

VALVE ONLY MODEL "H-1" 323500 MODEL "H-2" 323550 MODEL "H-3" 323540

Det. No.

TRIM ONLY 323536

122

Part No.

Req'd.

Det. No.

1/2" Swing Check Valve

311639

Description

Description 1/2" x 1 1/2" Nipple

Part No.

Req'd.

310301

1/2" Tee

311303

1/2" Union

311403

3/4" x 1 1/2" Nipple

310413

1/2" Ball Valve

311692

3/4" x 4 1/2" Nipple

310406

1/4" x 6" Nipple

310110

3/4" x 1/2" x 3/4" Tee

311313

2" Angle Valve

311617

1/4" Coupling

311402

3/4" x 3" Nipple

310403

2" x 5" Nipple

310803

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

2" x 2" x 1/2" Tee

311380

2" x 6" Nipple

310808

1/4" x 6 1/2" Nipple

310115

1/4" Elbow

311201

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

1/4" x 10" Nipple

310136

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

1/2" Coupling

311423

103

3/4" Close Galv. Nipple

310400-G

3/4" Union

311404

Alarm Line Bleeder

320506

122

1/2" x 1/4" Reducing Bushing

311100

3/4" x 2 1/2" Nipple

310402

3/4" Strainer

325535

OCTOBER 2012

Page 20 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 4" MODEL “H-2” HORIZONTAL POSITION / CONSTANT PRESSURE TRIM

31 16

42 31 60

71 71

70 16

41 17

159

122

5 70

Det. No.

Description

21 26

VALVE FACTORY TRIMMED MODEL "H-2" 323628-HP

103 36

37 24

VALVE ONLY MODEL "H-2" 323550-HP TRIM ONLY 323536-HP

122

8 27

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Swing Check Valve

311639

1/2" x 1 1/2" Nipple

310301

1/2" Tee

311303

1/2" Union

311403

3/4" x 1 1/2" Nipple

310413

1/2" Ball Valve

311692

3/4" x 4 1/2" Nipple

310406

1/4" x 6" Nipple

310110

3/4" x 1/2" x 3/4" Tee

311313

2" Angle Valve

311617

1/4" Coupling

311402

3/4" x 3" Nipple

310403

2" x 5" Nipple

310803

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

2" x 2" x 1/2" Tee

311380

2" x 6" Nipple

310808

1/4" x 6 1/2" Nipple

310115

1/4" Elbow

311201

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

1/4" x 10" Nipple

310136

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

1/2" Coupling

311423

103

3/4" Close Galv. Nipple

310400-G

3/4" Union

311404

Alarm Line Bleeder

320506

122

1/2" x 1/4" Reducing Bushing

311100

3/4" x 2 1/2" Nipple

310402

3/4" Strainer

325535

159

ø.437 Restricted Orifice

311410

OCTOBER 2012

Page 21 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 6" MODEL “H” SERIES VERTICAL POSITION / VARIABLE PRESSURE TRIM 1 70

31 31

73 15

5 1

122 12

59 4

122

17 18

74 71

1 22 98 25

VALVE ONLY MODEL "H-1" 323560 MODEL "H-2" 323667 (ANSI) MODEL "H-2" 323667-D (DIN) MODEL "H-3" 323590 TRIM ONLY 323580

VALVE FACTORY TRIMMED MODEL "H-1" 323575 MODEL "H-2" 323792 (ANSI) MODEL "H-2" 323792-D (DIN) MODEL "H-3" 323595

27 19

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

3/4" x 2 1/2" Nipple

310402

3/4" x 1 1/2" Nipple

310413

1/2" Tee

311303

1/2" x 2" Nipple

310302

3/4" x 3 1/2" Nipple

310404

1/2" Close Nipple

310300

1/2" Swing Check Valve

311639

1/4" x 5" Nipple

310108

1/2" Ball Valve

311692

1/2" Union

311403

Retard Chamber

323350

3/4" x 1/2" x 3/4" Tee

311313

2" x 3" Nipple

310802

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

3/4" x 4 1/2" Nipple

310406

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

2" Angle Valve

311617

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

2" x 2" x 1/2" Tee

311380

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

1/2" x 1 1/2" Nipple

310301

1/2" x 4 1/2" Nipple

310307

3/4" Union

311404

1/4" x 2" Nipple

310102

122

1/2" x 1/4" Reducing Bushing

311100

OCTOBER 2012

Page 22 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 6" MODEL “H-2” VERTICAL POSITION / VARIABLE PRESSURE TRIM 1 31

70 71

3 73

1 122 6

15 12

5 12

160

122

17 18 12

74 24

98 25

VALVE ONLY MODEL "H-2" 323667-HP (ANSI) MODEL "H-2" 323667-D-HP (DIN) TRIM ONLY 323580-HP VALVE FACTORY TRIMMED MODEL "H-2" 323792-HP (ANSI) MODEL "H-2" 323792-D-HP (DIN)

22 16

27 21

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

Description

Description 3/4" x 2 1/2" Nipple

Part No.

Req'd.

Det. No.

310402

Description 3/4" x 1 1/2" Nipple

Part No.

Req'd.

310413

1/2" Tee

311303

1/2" x 2" Nipple

310302

3/4" x 3 1/2" Nipple

310404

1/2" Close Nipple

310300

1/2" Swing Check Valve

311639

1/4" x 5" Nipple

310108

1/2" Ball Valve

311692

1/2" Union

311403

Retard Chamber

323350

3/4" x 1/2" x 3/4" Tee

311313

2" x 3" Nipple

310802

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

3/4" x 4 1/2" Nipple

310406

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

2" Angle Valve

311617

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

2" x 2" x 1/2" Tee

311380

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

1/2" x 1 1/2" Nipple

310301

1/2" x 4 1/2" Nipple

310307

3/4" Union

311404

1/4" x 2" Nipple

310102

122

1/2" x 1/4" Reducing Bushing

311100

160

ø.500 Restricted Orifice Union

311411

OCTOBER 2012

Page 23 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 6" MODEL “H” SERIES VERTICAL POSITION / CONSTANT PRESSURE TRIM 31

VALVE ONLY MODEL "H-1" 323560 MODEL "H-2" 323667 (ANSI) MODEL "H-2" 323667-D (DIN) MODEL "H-3" 323590 TRIM ONLY 323581

70 15 38

1 122

3 37

VALVE FACTORY TRIMMED MODEL "H-1" 323576 MODEL "H-2" 323793 (ANSI) MODEL "H-2" 323793-D (DIN) MODEL "H-3" 323596

12 45

6 70

103 5

12 12

122

35 6

32 43

17 12

70 25

22 21

37 16

67 37

53 27

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

Description

Part No.

Req'd.

Det. No.

1/2" Union

311403

Description

Part No.

Req'd.

1/4" x 2" Nipple

310102

1 1

1/2" Tee

311303

2" x 3" Nipple

310802

3/4" x 1 1/2" Nipple

310413

1/2" Close Nipple

310300

3/4" x 4 1/2" Nipple

310406

3/4" x 3 1/2" Nipple

310404

1/2" Ball Valve

311692

2" Angle Valve

311617

1/4" x 5" Nipple

310108

3/4" x 1/2" x 3/4" Tee

311313

2" x 2" x 1/2" Tee

311380

2" Close Nipple

310800

3/4" Elbow

311204

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 1/4" x 1/2" Tee

311305

3/4" Close Nipple

310400

3 1/2" Water Gauge (0-300psi)

300119

1/2" Close Galv. Nipple

310300-G

3/4" Swing Check Valve

311640

1/2" Coupling

311423

1/2" x 1 1/2" Galv. Nipple

310301-G

1/4" 3-Way Valve

311683

1/2" x 12" Nipple

310318

1/2" x 2" Galv. Nipple

310302-G

1/4" Plug

311001

Alarm Line Bleeder

320506

1/2" x 8 1/2" Galv. Nipple

310316-G

310400-G

311100

3/4" Union

311404

3/4" Strainer

325535

103

3/4" Close Galv. Nipple

3/4" x 2 1/2" Nipple

310402

1/2" x 1 1/2" Nipple

310301

122

1/2" x 1/4" Reducing Bushing

1/2" Swing Check Valve

311639

OCTOBER 2012

Page 24 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 6" MODEL “H-2” VERTICAL POSITION / CONSTANT PRESSURE TRIM 31 1 31

70 15 1

122

6 37

70 103

13 12

122

35 6 32

160 12 24

17 18

1 25

VALVE ONLY MODEL "H-2" 323667-HP (ANSI) MODEL "H-2" 323667-D-HP (DIN)

21 20

37 16

TRIM ONLY 323581-HP

VALVE FACTORY TRIMMED MODEL "H-2" 323793-HP (ANSI) MODEL "H-2" 323793-D-HP (DIN)

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd. 1

1/2" Elbow

311203

1/2" Union

311403

3/4" x 1 1/2" Nipple

310413

1/2" Tee

311303

2" x 3" Nipple

310802

3/4" x 3 1/2" Nipple

310404

1/2" Close Nipple

310300

3/4" x 4 1/2" Nipple

310406

1/4" x 5" Nipple

310108

1 1

1/2" Ball Valve

311692

2" Angle Valve

311617

2" Close Nipple

310800

3/4" x 1/2" x 3/4" Tee

311313

2" x 2" x 1/2" Tee

311380

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

3/4" x 1/2" x 1/2" Tee

311318

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

1/2" Coupling

311423

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

1/2" x 12" Nipple

310318

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

Alarm Line Bleeder

320506

103

3/4" Close Galv. Nipple

310400-G

3/4" Union

311404

3/4" Strainer

325535

122

1/2" x 1/4" Reducing Bushing

311100

3/4" x 2 1/2" Nipple

310402

1/2" x 1 1/2" Nipple

310301

160

ø.500 Restricted Orifice Union

311411

1/2" Swing Check Valve

311639

1/4" x 2" Nipple

310102

OCTOBER 2012

Page 25 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 6" MODEL “H” SERIES HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY MODEL "H-1" 323560 MODEL "H-2" 323667 (ANSI) MODEL "H-2" 323667-D (DIN) MODEL "H-3" 323590 TRIM ONLY 323623

VALVE FACTORY TRIMMED MODEL "H-1" 323617 MODEL "H-2" 323794 (ANSI) MODEL "H-2" 323794-D (DIN) MODEL "H-3" 323620

71 15

73 75

42 70 1

41 68 29

72 28

122

39 20

6 12

37 12

5 69

6 122

39 6 27

24 43 8

Det. No.

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

1/2" Tee

311303

1/2" Close Nipple

310300

1/2" Ball Valve

311692

3/4" x 1/2" x 3/4" Tee

311313

3/4" Elbow

311204

1/4" x 6 1/2" Nipple

310115

3/4" Close Nipple

310400

3/4" Swing Check Valve

311640

1/4" 3-Way Valve

311683

Description

Part No.

Req'd.

Det. No.

1/2" Swing Check Valve

311639

1/2" Union

311403

3/4" x 4 1/2" Nipple

310406

2" Angle Valve

311617

2" x 2" x 1/2" Tee

311380

2" x 6" Nipple

310808

1/4" Elbow

311201

1/2" Close Galv. Nipple

310300-G

1/4" x 10" Nipple

310136

1/2" x 1 1/2" Galv. Nipple

310301-G

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2 1/2" Galv. Nipple

310303-G

1/2" x 1 1/2" Nipple

310301

1/2" x 2" Galv. Nipple

310302-G

1/2" x 2 1/2" Nipple

310303

1/2" x 8 1/2" Galv. Nipple

310316-G

310318-G

311100

Description

Part No.

Req'd.

Retard Chamber

323350

1/4" Coupling

311402

1/2" x 1/4" x 1/2" Tee

311305

2" x 7 1/2" Nipple

310809

1/4" Plug

311001

3/4" x 1 1/2" Nipple

310413

1/2" x 12" Galv. Nipple

3/4" Union

311404

1/4" x 6" Nipple

310110

122

1/2" x 1/4" Reducing Bushing

3/4" x 2 1/2" Nipple

310402

3/4" x 3 1/2" Nipple

310404

OCTOBER 2012

Page 26 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 6" MODEL “H-2” HORIZONTAL POSITION / VARIABLE PRESSURE TRIM

VALVE ONLY

MODEL "H-2" 323667-HP (ANSI) MODEL "H-2" 323667-D-HP (DIN) TRIM ONLY 323623-HP

VALVE FACTORY TRIMMED MODEL "H-2" 323794-HP (ANSI) 323794-D-HP (DIN)

1 15

16 15

75 70 1

41 68 29

160

72 28

122

6 12

13 12

5 69

6 39

122 6 27

24 43 8

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Swing Check Valve

311639

Retard Chamber

323350

1/2" Tee

311303

1/2" Union

311403

1/4" Coupling

311402

1/2" Close Nipple

310300

3/4" x 4 1/2" Nipple

310406

1/2" x 1/4" x 1/2" Tee

311305

1/2" Ball Valve

311692

2" Angle Valve

311617

2" x 7 1/2" Nipple

310809

3/4" x 1/2" x 3/4" Tee

311313

2" x 2" x 1/2" Tee

311380

2" x 6" Nipple

310808

3/4" Elbow

311204

1/4" Elbow

311201

1/2" Close Galv. Nipple

310300-G

1/4" x 6 1/2" Nipple

310115

1/4" x 10" Nipple

310136

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Close Nipple

310400

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2 1/2" Galv. Nipple

310303-G

3/4" Swing Check Valve

311640

1/2" x 1 1/2" Nipple

310301

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

1/2" x 2 1/2" Nipple

310303

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

3/4" x 1 1/2" Nipple

310413

1/2" x 12" Galv. Nipple

310318-G

3/4" Union

311404

1/4" x 6" Nipple

310110

122

1/2" x 1/4" Reducing Bushing

311100

3/4" x 2 1/2" Nipple

310402

3/4" x 3 1/2" Nipple

310404

160

ø.500 Restricted Orifice Union

311411

OCTOBER 2012

Page 27 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 6" MODEL “H” SERIES HORIZONTAL POSITION / CONSTANT PRESSURE TRIM 31

16 15 31

42 16

15 60

41 18

73 70

70 122

1 6

122

13 37

30 5

103

4 24

VALVE ONLY MODEL "H-1" 323560 MODEL "H-2" 323667 (ANSI) MODEL "H-2" 323667-D (DIN) 6

43 8

37 21

VALVE FACTORY TRIMMED MODEL "H-1" 323618 MODEL "H-2" 323795 (ANSI) MODEL "H-2" 323795-D (DIN) MODEL "H-3" 323621 Description

Part No.

Req'd.

Det. No.

Description

TRIM ONLY 323624

Det. No.

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Swing Check Valve

311639

3/4" x 1 1/2" Nipple

310413

1/2" Tee

311303

1/2" Union

311403

1/4" x 6" Nipple

310110

1/2" Close Nipple

310300

3/4" x 4 1/2" Nipple

310406

3/4" x 3 1/2" Nipple

310404

1/2" Ball Valve

311692

2" Angle Valve

311617

1/4" Coupling

311402

3/4" x 1/2" x 3/4" Tee

311313

2" x 2" x 1/2" Tee

311380

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

1/4" Elbow

311201

2" x 6" Nipple

310808

1/4" x 6 1/2" Nipple

310115

1/4" x 10" Nipple

310136

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

1/2" Coupling

311423

1/2" x 8 1/2" Galv. Nipple

310316-G

310400-G

311100

1/4" Plug

311001

Alarm Line Bleeder

320506

103

3/4" Close Galv. Nipple

3/4" Union

311404

3/4" Strainer

325535

122

1/2" x 1/4" Reducing Bushing

3/4" x 2 1/2" Nipple

310402

1/2" x 1 1/2" Nipple

310301

OCTOBER 2012

Page 28 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 6" MODEL “H-2” HORIZONTAL POSITION / CONSTANT PRESSURE TRIM 31

16 15 31

42 16

15 60

1 18 160

74 73

70 122

25 73

122

73 3

37 30 5

103

4 69

37 20

VALVE ONLY MODEL "H-2" 323667-HP (ANSI) MODEL "H-2" 323667-D-HP (DIN)

37 21

TRIM ONLY 323624-HP

VALVE FACTORY TRIMMED MODEL "H-2" 323795-HP (ANSI) MODEL "H-2" 323795-D-HP (DIN)

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

Description

Part No.

Req'd.

Det. No.

1/2" Swing Check Valve

311639

Description

Part No.

Req'd.

3/4" x 1 1/2" Nipple

310413

1 2

1/2" Tee

311303

1/2" Union

311403

1/4" x 6" Nipple

310110

1/2" Close Nipple

310300

3/4" x 4 1/2" Nipple

310406

3/4" x 3 1/2" Nipple

310404

1/2" Ball Valve

311692

2" Angle Valve

311617

1/4" Coupling

311402

3/4" x 1/2" x 3/4" Tee

311313

2" x 2" x 1/2" Tee

311380

1/2" x 1/4" x 1/2" Tee

311305

3/4" Elbow

311204

1/4" Elbow

311201

2" x 6" Nipple

310808

1/4" x 6 1/2" Nipple

310115

1/4" x 10" Nipple

310136

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 2" Galv. Nipple

310302-G

1/4" 3-Way Valve

311683

1/2" Coupling

311423

1/2" x 8 1/2" Galv. Nipple

310316-G

1/4" Plug

311001

Alarm Line Bleeder

320506

103

3/4" Close Galv. Nipple

310400-G

3/4" Union

311404

3/4" Strainer

325535

122

1/2" x 1/4" Reducing Bushing

311100

3/4" x 2 1/2" Nipple

310402

1/2" x 1 1/2" Nipple

310301

160

ø.500 Restricted Orifice Union

311411

OCTOBER 2012

Page 29 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 8" MODEL “H” SERIES VERTICAL POSITION / VARIABLE PRESSURE TRIM 17

31 91

109

VALVE ONLY MODEL "H-1" 323830 MODEL "H-2" 323859 MODEL "H-3" 323852 TRIM ONLY 323862 VALVE FACTORY TRIMMED MODEL "H-1" 323860 MODEL "H-2" 323866 MODEL "H-3" 323864

1 72 3

33 16

87 15

122

67 21

6 39

70 61

65 17

37 63

122

45 4

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Union

311403

3/4" x 3/4" x 1/2" Tee

311317

1/2" Tee

311303

2" Angle Valve

311617

1/2" x 6" Nipple

310310

1/2" Close Nipple

310300

2" x 2" x 1/2" Tee

311380

2" x 7 1/2" Nipple

310809

1/2" Ball Valve

311692

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 1/2" x 3/4" Tee

311313

1/2" x 3 1/2" Nipple

310305

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

1/2" x 1 1/2" Nipple

310301

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

1/2" x 2 1/2" Nipple

310303

1/2" x 2 1/2" Galv. Nipple

310303-G

1/4" 3-Way Valve

311683

1/4" x 5" Nipple

310108

1/2" x 3" Galv. Nipple

310304-G

1/4" Plug

311001

3/4" x 2" Nipple

310401

1/4" Street Elbow

311211

3/4" Union

311404

2" Close Nipple

310800

1/2" x 3 1/2" Galv. Nipple

310305-G

3/4" x 2 1/2" Nipple

310402

Retard Chamber

323350

109

1/4" x 3 1/2" Nipple

310105

1/2" Swing Check Valve

311639

1/2" Angle Valve

311612

122

1/2" x 1/4" Reducing Bushing

311100

OCTOBER 2012

Page 30 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 8" MODEL “H-2” VERTICAL POSITION / VARIABLE PRESSURE TRIM 17

59 5

VALVE ONLY MODEL "H-2" 323859-HP TRIM ONLY 323862-HP VALVE FACTORY TRIMMED MODEL "H-2" 323866-HP

1 72 3

109

87 15

122

67 21

6 39

70 61

65 161

37 63

1 122

45 4

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

1/2" Elbow

311203

1/2" Union

311403

3/4" x 3/4" x 1/2" Tee

311317

1/2" Tee

311303

2" Angle Valve

311617

1/2" x 6" Nipple

310310

1/2" Close Nipple

310300

2" x 2" x 1/2" Tee

311380

2" x 7 1/2" Nipple

310809

1/2" Ball Valve

311692

3 1/2" Water Gauge (0-300psi)

300119

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 1/2" x 3/4" Tee

311313

1/2" x 3 1/2" Nipple

310305

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

1/2" x 1 1/2" Nipple

310301

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

1/2" x 2 1/2" Nipple

310303

1/2" x 2 1/2" Galv. Nipple

310303-G

1/4" 3-Way Valve

311683

1/4" x 5" Nipple

310108

1/2" x 3" Galv. Nipple

310304-G

1/4" Plug

311001

3/4" x 2" Nipple

310401

1/4" Street Elbow

311211

3/4" Union

311404

2" Close Nipple

310800

1/2" x 3 1/2" Galv. Nipple

310305-G

3/4" x 2 1/2" Nipple

310402

Retard Chamber

323350

109

1/4" x 3 1/2" Nipple

310105

1/2" Swing Check Valve

311639

1/2" Angle Valve

311612

122

1/2" x 1/4" Reducing Bushing

311100

161

ø.562 Restricted Orifice Union

311412

OCTOBER 2012

Page 31 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 175psi (12bars) RATED 8" MODEL “H” SERIES VERTICAL POSITION / CONSTANT PRESSURE TRIM 36 103

109

VALVE ONLY MODEL "H-1" 323830 MODEL "H-2" 323859 MODEL "H-3" 323852 TRIM ONLY 323863 VALVE FACTORY TRIMMED MODEL "H-1" 323861 MODEL "H-2" 323867 91 MODEL "H-3" 323865

30 71 71

5 32

1 71

122 15 6

21 12

18 61

4 53

1 6

37 63

31 4 1 21 15

27 4

122 16

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd. 1

1/2" Elbow

311203

2" Angle Valve

311617

1/2" Angle Valve

311612

1/2" Tee

311303

2" x 2" x 1/2" Tee

311380

3/4" x 3/4" x 1/2" Tee

311317

1/2" Close Nipple

310300

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 6" Nipple

310310

1/2" Ball Valve

311692

3 1/2" Water Gauge (0-300psi)

300119

2" x 7 1/2" Nipple

310809

3/4" x 1/2" x 3/4" Tee

311313

1/2" Coupling

311423

1/2" x 1/4" x 1/2" Tee

311305

3/4" Close Nipple

310400

1/2" x 12" Nipple

310318

1/2" Close Galv. Nipple

310300-G

3/4" Swing Check Valve

311640

Alarm Line Bleeder

320506

1/2" x 1 1/2" Galv. Nipple

310301-G

1/4" 3-Way Valve

311683

3/4" Strainer

325535

1/2" x 3" Galv. Nipple

310303-G

1/4" Plug

311001

1/2" x 1 1/2" Nipple

310301

1/4" Street Elbow

3/4" Union

311404

1/2" x 2 1/2" Nipple

310303

3/4" x 2 1/2" Nipple

310402

1/4" x 5" Nipple

310108

1/2" Swing Check Valve

311639

3/4" x 2" Nipple

310401

1/2" Union

311403

2" Close Nipple

310800

OCTOBER 2012

311211

1/2" x 3 1/2" Galv. Nipple

310305-G

103

3/4" Close Galv. Nipple

310400-G

109

1/4" x 3 1/2" Nipple

310105

122

1/2" x 1/4" Reducing Bushing

311100

Page 32 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE 300psi (25bars) RATED 8" MODEL “H-2” VERTICAL POSITION / CONSTANT PRESSURE TRIM

36 103 30 71

109

VALVE ONLY MODEL "H-2" 323859-HP TRIM ONLY 323863-HP VALVE FACTORY TRIMMED MODEL "H-2" 323867-HP

5 32

1 71

122 15 6

21 12

161

18 61

4 53

1 6

37 63

4 1

27 4

122 16

Det. No. 1

Part No.

Req'd.

Det. No.

1/2" Elbow

311203

2" x 2" x 1/2" Tee

Description

Part No.

Req'd.

Det. No.

311380

Description 3/4" x 3/4" x 1/2" Tee

Part No.

Req'd.

311317

1/2" Tee

311303

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 6" Nipple

310310

1/2" Close Nipple

310300

3 1/2" Water Gauge (0-300psi)

300119

2" x 7 1/2" Nipple

310809

1/2" Ball Valve

311692

1/2" Coupling

311423

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 1/2" x 3/4" Tee

311313

1/2" x 12" Nipple

310318

1/2" Close Galv. Nipple

310300-G

3/4" Close Nipple

310400

Alarm Line Bleeder

320506

1/2" x 1 1/2" Galv. Nipple

310301-G

3/4" Swing Check Valve

311640

3/4" Strainer

325535

1/2" x 3" Galv. Nipple

310303-G

1/4" 3-Way Valve

311683

1/2" x 1 1/2" Nipple

310301

1/4" Street Elbow

311211

1/4" Plug

311001

1/2" x 2 1/2" Nipple

310303

1/2" x 3 1/2" Galv. Nipple

310305-G

3/4" x 2 1/2" Nipple

310402

1/4" x 5" Nipple

310108

103

3/4" Close Galv. Nipple

310400-G

1/2" Swing Check Valve

311639

3/4" x 2" Nipple

310401

109

1/4" x 3 1/2" Nipple

310105

1/2" Union

311403

2" Close Nipple

310800

122

1/2" x 1/4" Reducing Bushing

311100

2" Angle Valve

311617

1/2" Angle Valve

311612

161

ø.562 Restricted Orifice Union

311412

OCTOBER 2012

Page 33 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE ALARM CHECK VALVE INSTALLATION AND MAINTENANCE GUIDE OPTIONAL ALARM PRESSURE SWITCH TRIM FOR USE WHEN MECHANICAL SWITCH IS PROVIDED WITH MECHANICAL ALARM.

FOR USE WHEN SWITCH IS PROVIDED WITHOUT MECHANICAL ALARM, TO PREVENT AIR LOCKS. 5

4 2

TO DRAIN

1 4

Part Number 323478 (Trim Only (Det. No. 1-4, 6 & 7)) Det. No.

Part Number 323485 (Trim Only (Det. No. 1-4)) Det. No.

Description

Part No. Req'd.

Part No.

Req'd.

3/4" x 4 1/2" Nipple

Description

310406

1/2" x 4" Nipple

310306

3/4" x 4 1/2" Nipple

310406

1/2" Elbow

311203

1/2" x 4" Nipple

310306

3/4" x 1/2" x 1/2" Tee

311318

1/2" Elbow

311203

Alarm Line Bleeder

320506

3/4" x 3/4" x 1/2" Tee

311317

1/2" Coupling

311423

Pressure Switch* (Sold Separately)

301650

Pressure Switch* (Sold Separately)

301650

*NOTE: Other pressure switches available upon request. May be substituted depending on application.

OPTIONAL DOUBLE ALARM PRESSURE SWITCH TRIM

OPTIONAL PRESSURE RELIEF VALVE TRIM 2

7 7

3 5

(EXISTING TRIM)

4 5 3

1 3

(EXISTING TRIM - SYSTEM SIDE)

Part Number 323477 (Trim with Pressure Relief Valve) Det. No.

Part Number 323470 (Trim with Pressure Switches) Det. No.

Description

Part No.

Req'd.

3/4" Close Nipple

310400

1/2" x 1/2" x 3/4" Tee

311389

1/2" x 1 1/2" Nipple

310301

1/2" Elbow

311203

1/2" Close Nipple

310300

1/2" Ball Valve

311692

Pressure Switch

301650

OCTOBER 2012

Description

Part No.

Req'd. 1

1/4" Pressure Relief Valve

323640

1/4"NPT Male x 1/4" Tube Elbow

320603

1/4" Copper Tubing

M-320604

Page 34 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN A.C.V.I.M., REV. #13

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

DESCRIPTION

SWING CHECK VALVE STANDARD & "SHOTGUN" MODEL RCV GROOVE/GROOVE 2", 2 Â˝", 65MM, 3", 4", 6", & 150MM SIZES

AND OPERATION

Globe Model RCV Swing Check Valves feature a swing type clapper designed for use in fire sprinkler or other types of water piping systems that incorporate grooved connecting pipe ends. They are effectively used when it is necessary to permit water flow in one direction only, preventing flow in the reverse direction (nonreturn). Because the RCV incorporates a spring-loaded clapper assembly, it may be installed in either the vertical position (upward flow only) or horizontal position (hinge pin to the top). Most commonly, it is used with various configurations of fire department connections for fire sprinkler systems, by-pass connections, gravity pressure tank and, pump discharge in connections from public water supplies to automatic sprinkler systems, etc. As an alternative to using an alarm check valve with a wet sprinkler system, an RCV Swing Check Valve may be used in a "Shotgun" arrangement whereby the valve is trimmed in a similar manner but utilizes an electric water flow switch and alarm bell instead of a water motor gong for fire notification. The body of the Globe RCV Swing Check Valve is constructed of high tensile strength cast iron having considerable ductility to reduce damage in field handling. It meets the ASTM A126 Class B rating. The RCV clapper assembly is made of stainless steel and has an E.P.D.M. rubber facing. It effectively provides a leak tight seal against back pressures greater than one (1) psi.

APPROVALS

MODEL RCV SWING CHECK VALVE

PHYSICAL DIMENSIONS

cULus Listed FM Approved NYC-DOB MEA 305-05-E

TECHNICAL DATA Water Working Pressure Rating - 300 psi (20.7 Bars) Factory tested hydrostatically to 600 PSI (41.4 Bars) Equivalent feet of pipe: 2" Valve = 7.2 feet, 2 1/2" Valve = 7.2 feet, 3" Valve = 7.2 feet, 4" Valve - 9.9 feet, 6" Valve = 16.1 feet SIZE

WEIGH T (lbs.) no trim 4.5

3 1/2"

4 1/2"

6 1/2"

1/4"

1 1/2"

2 1/4"

2 1/2"

4 3/4"

2 1/2"

1 1/4"

4 1/2"

1/4"

1 1/2"

2 1/2"

2 3/4"

5 1/2"

65MM

1 1/4"

4 1/2"

1/4"

1 1/2"

2 1/2"

2 3/4"

5 1/2"

1 1/4"

4 1/2"

7 3/4"

1/4"

3 3/4"

6 3/4"

6 1/4"

6 1/2"

8 1/2"

1/4"

2 1/2"

3 1/2"

4 1/4"

7 1/2"

17.5

10 1/2"

1/4"

3 1/4"

4 1/4"

5 1/2"

10"

40.5

150MM

10 1/2"

1/4"

3 1/4"

4 1/4"

5 1/2"

10"

40.5

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 NOVEMBER 2010

989-846-4583 FAX 989-846-9231 J-10

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN RCV REV. #3

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

SWING CHECK VALVE - 2",2 ½", 65MM, 3", 4", 6", & 150MM MODEL RCV-STANDARD & "SHOTGUN" GROOVE/GROOVE

CROSS SECTION

ITEM

DESCRIPTION

MATERIAL

2" P/N

2 ½" P/N 65mm

4" P/N

6" P/N 150mm

Hinge Pin

Stainless Steel

321521

321528

321535 321541

321549

Torsion Spring

Stainless Steel

321523

321531

321531 321545

321554

Machined Body (DIN)

Cast Iron

321501

1/2" NPT Plug

Cast Iron

311003

Seat Ring

Brass

321522

321530

321537 321543

321551

Locknut

Stainless Steel

321556

321556 321556

321556

Nameplate

Aluminum

321558

321558 321558

321558

3" P/N

321503 321505 321507 321509 (321503-D) (321509-D) 311003

311003 311003

311003

Clapper

Stainless Steel

321515

321527

321534 321540

321548

Clapper Facing Disc

EPD M

321516

321529

321536 321542

321550

Sealing Washer

Hard Fiber

321518

3 2 1 5 18

32 1518 321518

321518

Disc Retainer

Stainless Steel

321517

3215 17 321544

321544

Hex Head Bolt

Stainless Steel

321519

3 2 15 19

321555 321555

321559

"SHOTGUN" TRIM ARRANGEMENT

TOP VIEW

ITEM

DESCRIPTION

S IZE

10"

8 3/4"

2 1/4" 2 1/4"

2 1/2"

11"

9 1/4"

65mm

11"

9 1/4"

2 1/4"

12"

9 1/2"

2 1/2"

13 1/2"

10"

3 1/4"

14 1/4"

10 3/4"

150mm

14 1/4"

10 3/4"

FRONT VIEW 2" (DIN 50)

2 ½"

65mm (76mm Pipe O.D.)

3" (DIN 80)

4" (DIN 100)

150mm (165mm Pipe O.D.)

QTY.

RCV

321526

321533

321533-D

321539

321547

321557

321557-D

Angle Valve

311614 (1")

311615 (1 1/4")

311617 (2")

Close Nipple

310500 (1")

310600 (1 1/4")

310800 (2")

1/4" Water Gauge

300119

1/4" 3 Way Valve

311683

1/4" Plug

311001

1/4" Nipple

311101 (1 1/2")

311102 (2")

310102 (2")

310103 (2 1/2")

1/4" x 5 1/2" Nipple

310109

ORDERING INFORMATION SPECIFY Quantity Model Number Standard or Shotgun style

310103 (2 1/2") 310103 (2 1/2") 310109

310109

GLOBE® PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List).

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 FAX 989-846-9231 NOVEMBER 2010

PRINTED U.S.A.

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN RCV REV. #3

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

Butterfly Valves

4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 www.globesprinkler.com MAY 2013

L-1 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE BUTTERFLY VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Page Design Requirements and Installation

Care and Maintenance

GL175T

GL175G

GLR300G

GL300W

Friction Loss

Product Warranty

MAY 2013

Pagei www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE BUTTERFLY VALVE INSTALLATION AND MAINTENANCE GUIDE Design Requirements The Globe grooved butterfly valve should be connected to the piping system with approved couplings or flange adapters. Flow may be from either direction, and the valve may be positioned in any direction. Globe butterfly valves have been designed with a slow close hand wheel operator, which effectively minimizes water hammer. These valves feature minimum flow restriction and pressure loss when in the fully open position.

Installation When the valves are received from the manufacturer they should be handled carefully to avoid breakage and damage to the seating area. Before installation of the valve, clean piping, flange and coupling. When the valve closes hard, it is usually due to debris lodged in the sealing area. Often this may be corrected by backing off the hand wheel and closing again. The valve should never be forced to seat by applying a wrench to the hand wheel as this may distort the valve components or score the sealing surface. The use of excessive force to open or close the valve violates all warranties whether express or implied. The inlet and outlet pipe adjacent to the valve should be properly supported to prevent excessive stress on the valve body. The valves should not be used to force a pipeline into position as this may result in distortion of the valve body. Conduit and electrical connections to the optional tamper switch must be in accordance with National Electrical Code (NFPA 72) and requirements of the local authority having jurisdiction.

Care and Maintenance Globe butterfly valves require no regular maintenance, however, it is advisable to inspect and verify proper operation of the unit annually or in accordance with the authority having jurisdiction. The inspection should include a visual check for leakage at the valve pipe connection and body to operator connection. Inspection and maintenance should be performed by a qualified inspection service.

Switch Installation Globe butterfly valves are provided with internal supervisory position switches. The tamper switch operates by a cam connected to the valve stem. The switch will change position within two (2) full turns of the hand wheel from the fully open position. OPEN (YELLOW) S-1

Switch #1 For connection to the supervisory circuit. Normally closed: 2 Red Normally open: 2 Yellow Common: 2 White

FIRE ALARM CONTROL PANEL SUPERVISORY CIRCUIT

CLOSED (RED)

ACTUATOR CASE GROUND

END OF LINE RESISTOR OR NEXT DEVICE

(GREEN)

OPEN (BLUE)

Switch #2

S-2

Auxiliary switch connected per authority. Normally closed: 1 Orange Normally open: 1 Blue Common: 1 Black Ground Lead: 1 Green MAY 2013

COMMON (WHITE)

COMMON (BLACK)

CLOSED (ORANGE) AUX. DEVICE (BELL OR HORN)

VOLTAGE SOURCE NOTES 1.RATED:5A-1/6HP-125/250V

Shown with valve in closed position. Page 1

www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GL175T Bronze Butterfly Valves Threaded End, Sizes : 1", 1 ¼", 1 ½", 2" and 2 ½"

Specifications: Working Pressure : Max. Test Pressure : Max. Working Temp. :

175 PSI (12.5 Bars) 350 PSI (25.0 Bars) 250°F (120°C)

Factory Installed UL Listed Double Tamper Switch for Indoor and Outdoor Use.

Materials of Primary Components Body : Disc : Upper Stem : Lower Stem : Gear Housing, Cover : Hand Wheel : Flag Indicator : York Mechanism : Stem Bushing : Conduit Connector : O-Rings (All) : Cover Gasket :

Approvals: cULus Listed FM Approved NYC - DOB MEA 155-06-E

ASTM B-505 ASTM B-584 EPDM Encapsulated ASTM A-564 Type XM 12 ASTM A-564 Type XM 12 ASTM A-619 ASTM A-619 ASTM B-16 ASTM A-283 ASTM B-16 ASTM A-307 EPDM Grade "E" 4.02 (102.0) NBR 2.32 (59.0)

B C

3.72 (94.5)

DIMENSION

MAY 2013

UNIT: IN (mm)

SIZE

Part No.

2.16 (54.8)

2.06 (52.4)

1.48 (37.6)

311725-G

1 ¼"

2.68 (67.9)

2.25 (57.2)

1.63 (41.4)

311735-G

1 ½"

2.94 (74.6)

2.38 (60.3)

2.50 (63.5)

311745-G

3.31 (84.2)

2.56 (65.1)

1.97 (50.0)

311755-G

2 ½"

4.16 (105.6)

2.75 (69.9)

2.19 (55.6)

311760-G

Page 2 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GL175G Bronze Butterfly Valves Grooved End, Sizes : 2" and 2 ½"

Specifications: Working Pressure : Max. Test Pressure : Max. Working Temp. :

175 PSI (12.5 Bars) 350 PSI (25.0 Bars) 250°F (120°C)

Factory Installed UL Listed Double Tamper Switch for Indoor and Outdoor Use.

ASTM B-505 ASTM B-584 EPDM Encapsulated ASTM A-564 Type XM 12 ASTM A-564 Type XM 12 ASTM A-619 ASTM A-619 ASTM B-16 ASTM A-283 ASTM B-16 ASTM A-307 EPDM Grade "E" NBR 4.02 (102.0)

Approvals: cULus Listed FM Approved NYC - DOB MEA 155-06-E

2.32 (59.0)

C A

3.72 (94.5)

DIMENSION

MAY 2013

UNIT: IN (mm)

SIZE

Part No.

1.97 (50.0)

4.56 (115.8)

3.62 (91.9)

311765-G

2 ½"

2.18 (55.4)

4.56 (115.8)

3.81 (96.8)

311775-G

Page 3 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLR300G Grooved Butterfly Valves Grooved End, Sizes : 2 ½", 65mm, 3”, 4”, 6”, 150mm, 8”

Specifications: Working Pressure : Max. Test Pressure : Max. Working Temp. :

300 PSI (21.4 Bars) 600 PSI (42.8 Bars) 250°F (120°C)

Factory Installed UL Listed Double Tamper Switch for Indoor and Outdoor Use.

Materials of Primary Components Body : Disc : Upper and Lower Stems : Worm Gear Shaft : Housing : Hand Wheel : Flag Indicator : Sheer Pin : Segment Gear : Housing Gasket : O-Rings (All) :

ASTM A-536 Nylon-11 Coated ASTM A-536 EPDM Encapsulated AISI 420-SS AISI 410-SS ASTM A-536 ASTM A-536 ASTM A-536 ASTM A-510 ASTM B-148 or B-584 EPDM Grade "E" EPDM Grade "E" A

Approvals: cULus Listed FM Approved NYC - DOB MEA 155-06-E

5.00 (127.0)

DIMENSION SIZE

2 ½"

MAY 2013

5.31 (134.9)

B 5.06 (128.5)

4.37 (111.0)

UNIT: IN (mm) C

4.13 (104.9)

3.31 (84.1)

Part No.

3.81 (96.8)

311785-G 311785-GD

65mm (76mm PIPE O.D.)

5.31 (134.9)

5.06 (128.5)

4.13 (104.9)

3.31 (84.1)

3.81 (96.8)

5.59 (142.0)

5.06 (128.5)

4.41 (112.0)

3.61 (91.7)

3.81 (96.8)

311790-G

6.88 (174.8)

5.06 (128.5)

5.71 (145.0)

4.31 (109.5)

4.53 (115.1)

311795-G

8.25 (209.6)

8.66 (220.0)

7.06 (179.3)

5.71 (145.0)

5.22 (132.6)

311805-G

150mm (165mm PIPE O.D.)

8.25 (209.6)

8.66 (220.0)

7.06 (179.3)

5.71 (145.0)

5.22 (132.6)

311805-GD

9.22 (234.2)

8.66 (220.0)

8.03 (204.0)

6.71 (170.4)

5.81 (147.6)

311815-G

Page 4 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLR300W Wafer Type Butterfly Valves Wafer Type End, Sizes : 2 ½", 3”, 4”, 6” and 8”

Specifications: 300 PSI (21.4 Bars) 600 PSI (42.8 Bars) 250°F (120°C)

Working Pressure : Max. Test Pressure : Max. Working Temp. :

Factory Installed UL Listed Double Tamper Switch for Indoor and Outdoor Use.

Materials of Primary Components ASTM A-536 Nylon-11 Coated ASTM A-536 EPDM Encapsulated AISI 420-SS AISI 410-SS ASTM A-536 ASTM A-536 ASTM A-536 ASTM A-510 ASTM B-148 or B-584 EPDM Grade "E" EPDM Grade "E"

Body : Disc : Upper and Lower Stems : Worm Gear Shaft : Housing : Hand Wheel : Flag Indicator : Sheer Pin : Segment Gear : Housing Gasket : O-Rings (All) :

Approvals:

cULus Listed FM Approved NYC - DOB MEA 155-06-E

5.00 (127.00)

DIMENSION SIZE

MAY 2013

4.37 (111.0)

UNIT: IN (mm) C

Part No.

2 ½"

6.55 (166.4)

5.31 (134.9)

5.35 (135.9)

3.44 (87.4)

1.81 (46.0)

311836-G

6.81 (173.0)

5.31 (134.9)

5.63 (143.0)

3.66 (93.0)

1.81 (46.0)

311839-G

7.31 (185.7)

5.31 (134.9)

6.13 (155.7)

4.28 (108.7)

2.06 (52.3)

311846-G

8.58 (217.9)

8.66 (220.0)

7.41 (188.2)

5.67 (144.0)

2.20 (55.9)

311861-G

9.92 (252.0)

8.66 (220.0)

8.75 (222.3)

6.53 (165.9)

2.28 (57.9)

311871-G

Page 5 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

Grooved End Flow Characteristics 1.2 NORMAL PRESSURE DROP IN POUNDS PER SQUARE INCH (psi)

2½"

1.0

0.8

0.6

0.4

0.2

0.0 100

1,000

10,000

FLOW RATE IN GALLONS PER MINUTE (GPM)

Wafer and Grooved End Friction Loss Valve Size Inches (mm)

Valve Model

DW (Wafer)

Friction Loss in Equivalent Feet of Pipe

Valve Size Inches (mm)

Valve Model

Friction Loss in Equivalent Feet of Pipe

2½ (65)

4.8

2½ (65)

6.9

3 (76.2)

3.5

3 (76.2)

4.1

DG (Grooved)

4 (100)

2.4

4 (100)

6 (150)

5.1

6 (150)

5.5

8 (200)

5.4

8 (200)

5.4

Grooved End Flow Coefficient : CV

Disk Open Angle DN (mm)

SIZE (in) 30°

40°

50°

60°

70°

80°

90°

2 ½"

27.4

53.1

138

156

163

18.9

39.4

78.9

144

210

243

249

100

65.1

129

226

377

488

514

150

184

369

634

964

1196

1286

200

165

339

677

1230

2002

2850

3129

Wafer Type Flow Coefficient : CV at full open DN (mm)

100

150

200

SIZE (in)

2½"

222

389

1000

1998

4619

MAY 2013

Page 6 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE WARRANTY Listed and approved sprinkler products and devices manufactured by Globe Fire Sprinkler Corporation are produced in strict accordance with standard quality control procedures. We warrant our products to be free from defects in material and workmanship under normal use and service. Our obligation under this warranty shall be limited to replacing, at our plant, any parts thereof which shall, within one year after delivery to the ORIGINAL PURCHASER, be demonstrated to be defective. In order to accomplish demonstration of defectiveness, the parts claimed to be defective must be sent by the original purchaser to Globe Fire Sprinkler Corporation, 4077 Airpark Drive, Standish, MI 48658. Globe's warranty does not extend to incidental or consequential damages of any nature. In no event shall Globe Fire Sprinkler Corporation be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential damages, including but not limited to labor charges, regardless of whether Globe Fire Sprinkler Corporation was informed about the possibility of such damages, and in no event shall Globe Fire Sprinkler Corporation liability exceed an amount equal to the sales price. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING MERCHANT ABILITY AND FITNESS for purpose intended. No person, firm or corporation is authorized to assume for us any other liability in connection with the sale of our products.

MAY 2013

Page 7 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN BUTTERFLY REV. #5

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

3" Model A* 4" & 6" Model G-3 Dry Pipe Valve Installation and Maintenance Guide

4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 www.globesprinkler.com NOVEMBER 2012

E-4 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Globe Dry Pipe Valves General Description

Technical Data

Trouble Shooting

3" Model A* Dry Pipe Valve Assembly and Parts List

3" Model A* Dry Pipe Valve Basic Trim Setup

4" & 6" Model "G-3" Dry Pipe Valve Assembly and Parts List

4" Model "G-3" Dry Pipe Valve Trim Arrangement

6" Model "G-3" Dry Pipe Valve Trim Arrangement

Model "G-3" Dry Pipe Valve Operation

Model "G-3" Dry Pipe Valve Maintenance

Model "C" Accelerator and Anti-Flooding Device Assembly and Parts List

Optional Alarm Pressure Switch Trim

*Formerly known as Model D Page i www.globalfire.com.co - PBX: (+571) 898.54.55

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE GENERAL DESCRIPTION Globe Fire Sprinkler Corporation Dry Pipe Valves are essentially differential or differential mechanical control valves for use in dry pipe systems. They are the vital control units in dry pipe automatic sprinkler systems where supervisory air under pressure is used to prevent freezing that would certainly occur with ordinary wet pipe systems. The Dry Pipe Valve is the connecting link between the source of water supply and the automatic sprinkler, and must react promptly when it receives a signal from the protected area that a fire condition has developed and water is therefore quickly needed. This signal is generated by the opening of one or more sprinklers which causes a quick drop in the system supervisory air pressure resulting in a loss of the differential ratio. Globe Fire Sprinkler Corporation Model C Accelerator and Anti-Flooding Device are designed to be used in conjunction with dry pipe valves in dry pipe systems. The Model C Accelerator is used to reduce the time lag normally associated with the opening of a dry pipe valve after one or more system sprinklers have operated, resulting in faster water discharge from the opened sprinkler(s). The Model C Anti-Flooding Device is used to help ensure the proper operation of the accelerator by preventing most waterborne foreign objects from entering the accelerator. Globe Dry Pipe Valves, Accelerators, and Anti-Flooding Devices are designed and manufactured to the standards and/or requirements of cULus, FM Approvals and the City of New York Department of Buildings, and they conform to the design/usage requirements of NFPA 25.

IMPORTANT NOTES 1. Any dry pipe valve, accelerator and anti-flooding device should be carefully tested, examined, and cleaned periodically in accordance with NFPA 25. After testing, the accelerator must be fully drained of any water. 2. It is most important to ensure a clean water supply free of debris and solid particles such as sand, gravel, or mud. 3. If, during the annual inspection of dry pipe valves, accelerators or anti-flooding devices, sediment or free particles of matter are noted, a further examination of internal valve parts becomes necessary. 4. All deposits should be removed from all operating parts and ports. Vent holes through retaining ring screws, should be thoroughly cleaned and flushed with clean water. 5. Where difficulty in performance is experienced, the manufacturer or his authorized representative shall be contacted if any field adjustment is to be made. 6. When an electric alarm switch is used without a mechanical water motor, an alarm line air bleeder should be added to prevent trapped air pockets from delaying an alarm. The bleeder should consist of a restricting orifice of approximately 1/8" diameter and copper tubing of sufficient length to run to the drip cup.

TROUBLE-SHOOTING 1. Check all valves to see if they are open or shut according to instructions. 2. If the dry pipe valve leaks priming water: A) Check for debris between the brass seat and the rubber seat. B) Check for proper tightness of the retaining ring, clamping ring, and memory washer nut. C) Check for rips or tears in the "Bellofram." D) Make sure that the clapper lever is latched under the locking stud. E) Remove trim pipe to expose the atmospheric discharge tube. If water seeps from around the tube, it is an indication that the packing is loose. 3. If the dry pipe valve trips when supply water is turned on: A) If the locking stud has been removed, check for proper seating in the valve body. B) Check for the proper air to water pressure ratio. C) Velocity check must be horizontal and the ball must move freely. D) Check the air and water gauges for proper function. E) If an accelerator is used, be sure it is drained and set up according to instructions. F) Check for obstructions in the trim piping. 4. If there is no air to the accelerator: A) Check for proper installation of the anti-flooding device. B) Make sure that the check valve in the trim is in the proper position. 5. Accelerator won't trim or is too sensitive: A) Check accelerator for contamination. 6. Accelerator won't set: A) Check for torn diaphragm. B) Check air gauge for proper function. 7. Accelerator trips for no apparent reason after being installed for a period of time: A) Check system for leaks. B) Air compressor settings not proper.

NOVEMBER 2012

Page 1 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE 3â&#x20AC;? MODEL A CROSS SECTION

FIG. 1 ITEM 1

DESCRIPTION Cover

MAT'L

P/N

ITEM

Cast Iron

318501

DESCRIPTION Machine Screw

MAT'L

P/N

Bronze

318512

Cover Gasket

Rubber

318502

Air Seat Gasket

Rubber

318513

Cover Stud (6)

Steel

318503

Water Seat Gasket

Rubber

318514

Nut (6)

Steel

318504

Machine Screw

Brass

318515

Latch

Cast Iron

318505

Clapper Hinge Pin

Brass

318516

Clapper Arm Assembly

N/A

318506

Cotter Pin

Brass

318517

Clapper Arm Hinge Pin

Monel

318507

Latch Pin

Brass

318518

Hinge Pin Plug

Brass

318508

Retaining Washer

Brass

318526

Clapper Assembly

N/A

318509

Seat Ring

Bronze

318522

Clapper

Bronze

318510

Air Seat

Bronze

318523

Clapper Ring

Bronze

318511

TECHNICAL DESCRIPTION The Globe Model A Dry Pipe Valve is essentially a differential check valve. The bronze clapper carries two rubber gaskets. The larger (air) gasket is rubber and seats against pure tin. The smaller gasket (water) is a specially designed rubber disc, which also seats on pure tin. These seats are so proportioned that one pound of air pressure will hold back approximately six pounds of water pressure. When the air pressure on the surface of the priming water is relieved by the opening of a sprinkler, the upward pressure of the water underneath the water gasket causes the clapper to lift, the intermediate chamber instantly fills, sounds the alarm, and the water pressure, acting on the entire surface of the clapper, pushes it over to the wide open position and thus leaves a passage for the water to the sprinkler system.

INSPECTION & MAINTENANCE Test main riser for water to make sure dry pipe valve is not water columned. Water should be up to but not above the level of valve 6 (Fig.2). Close main control valve. Open main drain valve 1 (Fig.2). Close valve 6 (Fig.2) - remove 7 (Fig.2) - then open 6 (Fig.2) and draw off any water above the level of this valve. Replace 7 (Fig.2) and open 6 (Fig.2). Check air pressure according to chart, shown above. Close drain valve 1 (Fig.2) and then open main control valve. Air pressure must be maintained, and checked at least once a week,

NOVEMBER 2012

under normal conditions. During freezing weather it should be checked daily. Check valve 8 (Fig.2) in the fall before freezing weather sets in to assure a tight seat. Alarm Devices are to be tested in accordance with NFPA 25. Drip Valves or Drum Drips should be drained before freezing weather sets in and occasionally during the winter.

RESETTING THE MODEL A DRY PIPE VALVE Close Main Controlling Valve or Post Indicator to shut off water supply to Sprinkler System. Open valve 1 (Fig.2) to drain sprinkler system. Gong and electric bell may be shut off by closing valve 2 (Fig.2). Vent sprinkler system by opening 3/4" Inspector's Test Valve which is normally located at the top of the system. After system is thoroughly drained, remove cover plate, Item 1 (Fig.1) for resetting dry valve. Raise clapper off seat and scoop out any scale or solid particles found in the intermediate chamber, in the bottom of the valve, between the air and water seats. With a clean piece of cloth wipe the surfaces of the rubber seats on the swinging clapper, also the tin seats in the valve. Never apply grease, tallow, or any other substance to water or air seat. Let bronze clapper down on its seat making sure that the rubber air ring presses evenly

Page 2 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE all around the air seat. Put on cover plate, Item 1(Fig.1) making sure that gasket is in good condition. Replace nuts and tighten evenly, a little at a time, all around. Drip valves are found at low points (if any) on sprinkler piping. They would not be drained by previous operations - open these valves for draining after removing plugs and close when water stops running. Close 3/4" Inspector's Test Valves, previously opened to vent system. Replace sprinklers fused by fire. Prime by opening until priming level even with cup. Remove plug 7(Fig.2) and close valve 4(Fig.2). Water must not be allowed to stand above the priming water level. Open valve 6 (Fig. 2) and pump air pressure into system. When ten pounds pressure has been built up open drip valves again to force water from low points of system then close drip valves tightly and plug. Pump the correct air pressure into the sprinkler system then close valve 6(Fig.2) tightly. Make sure there is no leakage of priming water by the rubber air seat into drip cup 10 (Fig.2) by observing automatic drain valve 9 (Fig.2). Note: Never allow air pressure to drop below minimum limit, to safeguard against accidental tripping of dry valve. Air pressure required for accidental tripping of dry valve. Air pressure required for sprinkler systems should be calculated at approximately one pound of air for every six pounds of water pressure. The air pressure should be maintained at approximately twenty pounds above calculated air pressure per NFPA 5-2.7.7.

PHYSICAL DATA Overall Length

3" 14 1/2"

Center of Valve to Back

Center of Valve to Right

17"

Center of Valve to Left

Weight of Valve Complete with all Trimmings Minimum Inside Dimensions of Enclosed Valve House Friction Loss in Equivalent Feet

106 lbs. 157 lbs. 45" x 52" 9'

5 4 TO ALARM

2 9

7 6 1

8 10 FIG. 2

NOVEMBER 2012

Page 3 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE 3” MODEL A TRIM ARRANGEMENT 21 56

ACCELERATOR/AFD TRIM 318526

25 25 21 25 23 43 23

27 46

45 TO 44

24 29

51 5

VALVE ONLY MODEL "A" 318500

76 76

BASIC TRIM ONLY 318524

VALVE FACTORY TRIMMED MODEL "A" 318520

76 73

75 33

64 59

VALVE FACTORY TRIMMED W/ ACCELERATOR & AFD W/TRIM MODEL A 318521

5 5

30 18

10 71

FIG. 2 Det. No.

Description

Part No. Req'd.

Det. No.

Description

Part No. Req'd.

Det. No.

Description

Part No. Req'd.

3/4" Close Nipple

310400

3 1/2" Air Gauge

300120

3/4" x 3 1/2" Nipple

310404

3/4" Check Valve

311640

1/4" Plug

311001

3/4" Tee

311304

3/4" Street Elbow

311206

1/2" Velocity Check Valve

323300

3/4" Elbow

311204

Priming Cup

300470

1/2" x 1/4" x 1/2" Tee

311305

3/4" x 1/2" x 3/4" Tee

311313

1/2" Close Nipple

310300

Model "C" Accelerator

300400

3/4" x 1/4" x 3/4" Tee

311392

1/2" Elbow

311203

Model "C" Anti-Flooding Device

323332

1 1/2" Angle Valve

311616

1/2" Angle Valve

311612

1/4" x 1/4" Tube Male Connector

320605

1 1/2" x 5 1/2" Nipple

310708

1/2" Check Valve

311639

1/4" Copper Tubing

M-320604

26 1/8"

1 1/2" x 1 1/2" x 1/2" Tee

311391

1/4" Elbow

311201

1/4" x 3 1/2" Nipple

310105

1/2" x 5 1/2" Nipple

310309

1/4" Close Nipple

310100

1/4" x 1/4 Tube Female Elbow

320603

1/2" Street Elbow

311210

1/4" Union

311401

3/4" x 2 1/2" Nipple

310402

1/4" x 6" Nipple

310110

1/4" x 1 1/2" Nipple

310101

3 1/2" Air Gauge

300420

3/4" x 4 1/2" Nipple

310406

310304

310300-G

1/4" 3-Way Valve

311683

1/2" x 2" Nipple

310302

1/2" x 3" Nipple

1/4" Tee

311301

3/4" Angle Valve

311613

1/2" Close Galv. Nipple

1/4" x 2" Nipple

310102

3/4" Union

311404

3/4" Close Galv. Nipple

310400-G

1/4" Globe Valve

311600

3/4" Ball Valve

311682

3/4" x 2 1/2" Galv. Nipple

310402-G

3 1/2" Water Gauge (0-300psi)

300119

3/4" x 3/4" x 1/4" Tee

311315

NOVEMBER 2012

Page 4 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE 4” & 6” MODEL “G-3” CROSS SECTION 10 33 19 24

6 34

4 31 27

23 14 20

25 32

7 5

12 11

36 18

1 16

FIG. 3 ITEM

DESCRIPTION

MAT'L

4" P/N

6" P/N

ITEM

DESCRIPTION

MAT'L

4" P/N

6" P/N

Bellofram

EPDM

319794

319844

Cover

Cast Iron

319767

319814

Seat Ring

Bronze

300014

300213

Bronze

300011

300210

Clapper and Ring Assembly

Bronze

319779

319821

Packing Nut

Bronze

300025

Lever

Bronze

319757

319807

Cover Bolt (7) (8)

Steel

319768

319815

Rubber Seat Ring

EPDM

319791

319841

Cap Screw (6)

Bronze

319760

Compression Plate

Bronze

319752

319802

Rubber Gasket

Rubber

300030

Retaining Ring

Bronze

319792

319842

Brass

300031

Clapper Latch

Bronze

300015

300214

Bronze Washer

Bronze

300032

Locking Stud

Bronze

300016

300215

Packing Gland Ring

Bronze

300035

"G-3" Body

Cast Iron

319704

319812

Lock Washer

Bronze

319761

Hinge Pin

Bronze

300018

300217

Cap Screw

Bushing

Bronze

300019

300218

Shield

Bronze

319762

Elastomer

319758

319808

Bronze

319798

319845

Memory Washer

Brass

319763

319811

Latch Screw

Brass

300020

Cotter Pin

Brass

300211

Plug

Bronze

300021

Nut

Brass

319756

319806

Atmospheric Discharge Tube

Brass

319766

300022

Packing

PTFE

300036

Retaining Ring Screw (6)

Bronze

319778

1" Close Galvanized Nipple

Cover Gasket

Rubber

300023

300219

1" Elbow

Clamping Ring

Bronze

319793

319843

N/S

Cover Release Screw

Galvanized 310500-G

N/A

Steel

311205

311207

Stainless

300012

TECHNICAL DESCRIPTION The Globe Models F-3 and G-3* Dry Pipe Valves have a single clapper assembly design which provides varying areas exposed to working pressures which, in combination, create a differential ratio between system air pressure and water supply pressure. A single-latching lever is provided as a means of holding the clapper in the "set" position. The body of the Dry Pipe Valve is constructed of high tensile strength cast iron having considerable ductility to reduce

damage in field handling. All interior parts are machined from highly corrosive-resistant copper alloys, each having high strength and good wear resistance. Rubber parts are of selective material which have good abrasive resistance and long life expectancy in terms of resiliency.

*All information contained in this Bulletin pertains to both Models, F-3 and G-3 Dry Pipe Valves unless otherwise specified.

NOVEMBER 2012

Page 5 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE The differential operating ratio of the Globe Dry Pipe Valve is between 5 to 1 and 6.5 to 1 in terms of water service pressure to normal tripping air pressure. The ratio varies within the range specified, depending on water service pressure. For example, at 20 pounds per square inch water service pressure, the air pressure at the tripping point would be approximately 3 pounds per square inch as indicated on the air gauge. If the water service pressure is 80 pounds per square inch, the air pressure tripping point will be approximately 16 pounds per square inch as indicated on the gauge. The differential tripping ratio is stabilized due to the constant area exposure provided on the top surface of the operating "Bellofram,â&#x20AC;? Item 1 (Fig.3) Page 5. As a guide to determining required system air pressure to be maintained, refer to the table below. In using this table, consider the maximum water pressure to which the system may be subjected due to line pressure variations or the application of booster fire pumps. WATER PRESSURE P.S.I.

AIR PRESSURE REQUIREMENTS P.S.I.

MAXIMUM

MINIMUM

MAXIMUM

100

125

150

175

OPERATION Air pressure held in the sprinkler system piping above the Dry Pipe Valve provides "a mechanical force" to hold the valve closed. When an automatic sprinkler operates, or an inspec or's test valve is opened, air continually discharging from the opening will reduce the system air pressure to a point below the differential balancing point or normal ratio between air pressure and water service pressure. The balancing, or tripping point, is that pressure at which the dry pipe valve clapper will open and permit water to flow upward into the sprinkler system piping. The valve clapper opens because the mechanical forces holding it closed have been reduced in proportion to the reduction in the system air pressure exerted on the compression plate, Item 6 (Fig.3) through the "Bellofram." As the compression plate moves upward at the differential balancing point, the end of the lever, Item 4 (Fig.3) attached to the compression plate also moves upward. The forward end of the lever pivots on the pin, Item 13 (Fig.3) and disengages the lever "toe" with the underside of the locking stud, Item 9 (Fig.3) unlatching the clapper assembly. The clapper assembly rotates upward and back on the hinge pin, Item 11 (Fig.3), allowing an unobstructed passage for water to enter the sprinkler system piping. A clapper latch, Item 8 (Fig.3) is provided to prevent the

NOVEMBER 2012

clapper from returning to its seat after operation, so that the system piping can be drained through an opening located below the seat ring level when re-establishing the system into service. The seat ring, Item 2 (Fig.3), contains two seating surfaces for the rubber seat ring, Item 5 (Fig.3). The outer seat surace provides a seal to retain the air pressure in the system, and the inner surface of the seat ring provides a seal against the system water service pressure. The inner area or space between the air seal and the water seal is vented, or channeled, to the outside room atmosphere through the atmospheric discharge tube, Item 16 (Fig.3). A system of "trim" piping is connected on the outside of the Dry Pipe Valve to the atmospheric discharge tube. This connects the "between seats" area to a pipe line terminating at a mechanical water motor alarm or an electric alarm switch. When the valve is in the "set" position (Fig.3) and the clapper assembly is latched under the extension of the locking stud, the area or space between the seat-sealing surfaces is exposed to the atmospheric pressure or normal outside room air pressure. When the valve clapper opens, and water is flowing through the valve, the inner area of the seat ring, between the air and water seals is exposed to the water supply. Water flows into this area and out through the atmospheric discharge tube into the "trim" piping to the alarm line on the outside of the valve. Water discharging through these lines is directed to a mechanical water motor alarm gong and/or electric alarm switch (circuit closer) (see Important Note #6, Page 1). Water flowing to the alarm provides an audible alarm indicating that the sprinkler system has operated or that a fire exists in a particular area.

C B

G D A

Page 6 www.globalfire.com.co - PBX: (+571) 898.54.55

F FIG. 4

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE Included in the outside trimmings of the Dry Pipe Valve is an alarm test valve "G" (Fig.4). This valve may be opened at any time when the system is in service to test the operation of the alarm devices only.

To Set the Valve 1. After the valve has operated, and there is no further need for water to flow through the system, close the main valve controlling the water supply to the sprinkler system. The main control valve usually consists of a full size gate valveor butterfly valve located under the dry pipe valve or it may be in the form of a post indicator valve located outside the building above ground. 2. Open the main drain valve "A" (Fig.4). When this valve is opened to drain the system, make certain that the discharge from the system drain does not flow into an area where a large flow of water will cause damage. Make sure that all low points in the system are also drained through any other existing auxiliary drain valves provided. Make certain that all auxiliary or low point drain valves are closed tightly after all water has been drained. 3. After all system piping has been drained, remove the dry pipe valve cover, Item 20 (Fig.3). The valve clapper will be found in the open position and will be held in the open position by the clapper latch, Item 8 (Fig.3), located on the back inside wall of the valve body. Remove any dirt or sediment which may be found on the seat surfaces or inside of the valve. 4. Raise the valve clapper off the clapper latch. Hold the clapper latch up and to the left. This will allow the clapper to move downward to the seat surfaces. The clapper latch has three steps, and it will be necessary to hold the clapper latch out until the clapper drops free of the lower step. 5. When the clapper is resting properly on the seat ring, and the forward left end of the lever is engaged under the locking stud, replace the cover plate with gasket, bolting it securely. At this point make certain that the main drain valve is not closed. Open the priming valve "H" (Fig.4). Obtain approximately 3 quarts of clean water. Pour the water into the priming cup "C" (Fig.4) slowly until the water has passed through the opened priming valve and into the body of the dry pipe valve. The valve must be primed with water with no air pressure in the system piping. After the priming water is introduced into the valve body, close the priming valve tightly. 6. Introduce air into the system by starting the primary air source compressor and/or by opening the supply valve from an air storage tank. The main air supply valve is indicated as "D" (Fig.4). When the desired air pressure (see table on page 6) is indicated on the air pressure gauge, shut off the air compressor and/or close the main air supply valve. Open the main water supply valve with the main drain valve slightly open to exhaust any air which may be trapped under the main valve clapper, close the main drain valve and make certain that the main water supply valve is in the full open position. If air or water is leaking from the mechanical drain "F" (Fig.4), this will indicate a leakage either through the clapper at the main seat or through

NOVEMBER 2012

the "Bellofram," Item 1 (Fig.3), or through the water inlet seat. Continued leaks occurring at the mechanical drain require a close examination of the seating surfaces and condition of the rubber sealing surfaces. If no leakage is evident, then the Dry Pipe Valve is in the normal "set" position and the system is considered operative in the event of fire.

G-3

PHYSICAL DATA SIZE

Overall Length

16"

16 1/2"

Center of Valve to Back

11"

12"

Center of Valve to Right

12"

Center of Valve to Left

10"

11"

Weight of Valve Complete with all Trimmings

151 lbs. 169 lbs.

221 lbs. 239 lbs.

Minimum Inside Dimensions of Enclosing Valve House

45" x 52" 45" x 52"

Friction Loss in Equivalent Feet

19'-6"

31'-0"

MAINTENANCE Should the "Bellofram," or rubber seat ring, Item 5 (Fig.3), be damaged requiring replacement, the clapper, Item 3 (Fig.3), should be removed from the valve. To remove the clapper, place the fingers of your right hand under the back end of the clapper sliding the hinge pin, Item 11 (Fig.3), towards you and out through the hole provided in the body of the valve. The hole is normally covered by the cover plate. Cover the bronze metal seat in the valve with a soft rubber material or cardboard to prevent damage to metal surfaces while removing the clapper assembly.

To Replace "Bellofram" Place the clapper face down on a suitable working surface. Remove the top cap screw, Item 30 (Fig.3), and pin, Item 13 (Fig.3). Remove the shield, Item 31 (Fig.3), pin, Item 21 (Fig.3), and the lever, Item 4 (Fig.3). Remove the nut, Item 34 (Fig.3), and memory washer, Item 32 (Fig.3). Remove all cap screws, Item 24 (Fig.3). Remove the clamping ring, Item 19 (Fig.3), and replace the "Bellofram" with one of proper size and material as supplied by the manufacturer. Install the new "Bellofram" with printed wording down against the upper surface of the compression plate, Item 6 (Fig.3). Make certain that the "Bellofram" when installed takes the shape illustrated in Fig.3. Replace the clamping ring and cap screws. Place compression plate in upper recess of clapper. Place the memory washer in position and tighten the nut. Continue to follow the reverse procedure as outlined above for complete assembly of the clapper unit and insert the assembly into the valve without damaging the seat. Insert the hinge in its proper location. Follow the procedure as outlined under the instructions "To Set the Valve."

Page 7 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE To Replace Rubber Seat Ring After removal of the "clapper assembly" from the body, place it face upward on a suitable working surface. The clapper may be held in a vise by clamping on one of the hinge arms. Care should be taken not to mar or bend any of the bronze parts. With a wide blade flat end screw driver, remove all of the retaining screws, Item 17 (Fig.3). Remove the retaining ring, Item 7 (Fig.3). Remove the rubber seat ring, Item 5 (Fig.3) and replace with one of proper size as supplied by the manufacturer. Replace the retaining ring aligning all screw holes. Insert all retaining ring screws. One at a time, tighten each screw slightly in a circular pattern until each screw is reasonably tight. Do not overtighten screws. The reason for this procedure is to insure that the retaining ring will not bend and that tightening forces are applied evenly against the rubber. If one screw is tightened ahead of another, the rubber ring will be squeezed out causing one section to be higher than the other. An uneven rubber surface will cause difficulty in obtaining a good seal against the seat surface and may even cause water or air leaks at the sealing surfaces. After all retaining ring screws are evenly tightened and the rubber surface appears to be even, the clapper assembly can be reinstalled in the valve body. Follow the procedure outlined under the instructions "To Set the Valve."

To Test Electric or Mechanical Alarm Operation Only Open alarm test valve "G" (Fig.4). This will allow water from below the dry pipe valve seat to be diverted through a by-pass line directly to the mechanical or electrical alarm mechanisms. Make certain that the alarm test valve is wide open during the

NOVEMBER 2012

alarm test. The alarm shut off valve "B" (Fig.4) must remain open at all times during alarm test and while the sprinkler system is in a normal operating condition. The alarm shut off valve is used only to shut off alarm when necessary during maintenance procedures. After a satisfactory alarm test is accomplished, make certain that the test valve "G" (Fig.4) is closed tightly.

To Trip Test the System To provide realistic test information, a trip test should be performed only by the release of air from the inspector's test valve located in a remote portion of the sprinkler system piping. To release air from any other openings or valve would not provide a calibrated discharge of air. This would reflect on the tripping time lapse and would not compare with operational time in the event of "fire" operation. Open the inspector's test valve. Have someone standing by at the dry pipe valve to read the air pressure gauge at the moment the dry pipe valve trips. After the valve "trips," close the main control valve and follow the procedure as outlined under the instructions "To Set the Valve." Record the time from the opening of the inspector's test valve until a full flow of water is observed coming from the inspector's test valve flow orifice. Also, record the tripping pressure indicated on the air gauge at the time the valve tripped. A later comparison of trip test records may indicate possible need for maintenance or repairs to the system. An increasing lapsed time may indicate either a partly plugged inspector's test valve or sludge build-up in the system piping. A lower or higher tripping pressure may indicate need for replacement or close examination of mechanical parts.

Page 8 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE MODEL â&#x20AC;&#x153;Câ&#x20AC;? ACCELERATOR AND ANTI-FLOODING CROSS SECTION 1

7 3

1 5

6 8

Port H

Port F

2 4

Port G

14 11

15 Det. No.

FIG. 5 Material

Part No.

Upper Chamber

Description

Bronze

300401

Lower Chamber and Valve Seat Assembly

Bronze

300402

Pressure Plate

Brass

300405

Diaphragm Plate

Brass

300406

Nut

Bronze

300407

Gasket

Clamping Ring

Diaphragm

Restricted Orifice Pin

Valve Disc and Disc Retainer Assembly

Retaining Screw

Spring Retainer Disc

Brass

300416

Gasket

E.P.D.M.

300417

Spring

Bronze

300418

Plug

Brass

300419

E.P.D.M.

300408

Brass

300409

Neoprene

300410

Monel

300411

Neoprene/Brass

300412

Bronze

300415

Det. No.

Description

Material

Part No.

Top

Brass

323334

Body

Brass

323333

Diaphragm

E.P.D.M.

323335

Spring

Stainless Steel

323336

Screw

Steel

323337

Model C Acclerator and Anti-Flooding Device When the Model C Accelerator "A" (Fig.6) and in section (Fig.5) is attached to the Globe Dry Pipe Valve, as illusrated, the same procedure is followed in reestablishing the system in service; same as followed without this attachment, except that - after draining water from the system piping and before pumping air into the system, the lower hand wheel plug, Item 15 (Fig.5), should be "unscrewed" from the bottom of the accelerator and interior valve assembly, Items 9, 14, and 2 (Fig.5), should be removed. This complete assembly can be pulled out by hand (if it does not come out with the hand-wheel cap when it is unscrewed). This will allow any water, that may have accumulated in the upper chamber, to drain out and permit thorough cleaning of the valve disc, Item 10, seat assembly, Item 2, and the orifice pin, Item 9. The valve assembly can then be replaced and the handwheel cap screwed back into position. The device is then set for operation when air pressure is pumped into the system

NOVEMBER 2012

piping. It is important that the foregoing procedure be followed after each operation of the system in order to insure against leakage of air in the event of scale and other substances collecting on the discharge seat of the Accelerator and to insure proper action of the system in the event of fire. If it becomes necessary to remove the Accelerator from the valve, close the 1/4" control valve "B" (Fig.6), and disconnect the unions "C" and "D." Remove nipple and union half which are connected into fitting at "E" (Fig.6), and insert a 1/4" pipe plug. The dry valve will now operate normally without the Accelerator feature. For installation of the Anti-Flooding Device - Inlet port F of the anti-flooding device ports to the upper 1/4" NPT on the top side of the dry pipe valve (Port B). Outlet port G on the antiflooding device goes to the inlet side of the accelerator with a globe valve mounted between them for operation of the valve

Page 9 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE without the accelerator and anti-flooding device. Inlet port H is ported to the exhaust side of the accelerator and the intermediate chamber of the dry valve seat ring. During normal operation, as air pressure is reduced in the system (resulting from the operation of one or more sprinklers), the passage of air from the accelerator is introduced into the intermediate chamber of the dry valve causing it to trip immediately, allowing water from the supply to enter the system. As the air pressure enters port H on the anti-flooding device, it is assisted by the help of a spring to close the passage between ports F and G on the anti-flooding device, thus preventing flow of water or water borne debris from entering the accelerator. This allows for a more easily maintained and trouble-free system.

D FIG. 6

NOVEMBER 2012

Page 10 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE 4” MODEL “G-3” TRIM ARRANGEMENT 34

54 79

40 11

17 14 18

31 11

45 44 29

23 21

VALVE ONLY MODEL "G-3" 319749

BASIC TRIM ONLY 319822

VALVE FACTORY TRIMMED W/ ACCELERATOR & AFD W/TRIM MODEL "G-3" 319748 Description

Part No.

Req'd.

Det. No.

Description

Part No.

VALVE FACTORY TRIMMED MODEL "G-3" 319774

Det. No.

80 30

13 43

78 75

ACCELERATOR/AFD TRIM 300465-2

23 11

Req'd.

Det. No.

Description

2" Street Elbow

311209

1/4" x 5" Nipple

310108

1/2" x 1/4" x 1/2" Tee

2" Close Nipple

310800

1/4" Elbow

311201

1/2" Check Valve w/Vented Clapper

2" Angle Valve

311617

1/4" Street Elbow

311211

2" x 2" x 3/4" Tee

311323

1/4" Close Nipple

310100

3/4" Close Nipple

310400

1/4" Union

311401

3/4" Check Valve

311640

1/4" x 1 1/2" Nipple

310101

3/4" Street Elbow

311206

1/4" Ball Valve

311690

3/4" x 4" Nipple

310405

1/4" 3-Way Valve

Drip Cup

300122

Priming Cup

300470

Part No.

Req'd.

311305

311639-V

Model "C" Accelerator

300400

Model "C" Anti-Flooding Device

323332

1/4" x 1/4" Tube Male Connector

320605

1/4" Copper Tubing

M-320604

1/4" x 3 1/2" Nipple

310105

311683

1/4" x 4 1/2" Nipple

310107

1/4" Tee

311301

1" x 1/2" Bushing

311107

1/4" x 2" Nipple

310102

1/4" x 1/4" Tube Female Elbow

311199

1/2" Close Nipple

310300

1/4" Plug

311001

1/2" Ball Valve

311692

1/2" Elbow

311203

1/4" Globe Valve

311600

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 4" Nipple

310306

3 1/2" Water Gauge (0-300psi)

300119

1/2" Plug

311016

1/2" Angle Valve

311612

3 1/2" Air Gauge

300120

3 1/2" Accelerator (Air) Gauge

300420

1" Close Nipple

310500

1" Plug

311005

1/2" Close Galv. Nipple

310300-G

1/2" x 1 1/2" Galv. Nipple

310301-G

36*

1" Elbow

311205

78*

1" Close Galv. Nipple

310500-G

1" Cross

300107

1" x 2" Galv. Nipple

310501-G

1/2" x 2 1/2" Galv. Nipple

310303-G

1/2" Soft Seat Check Valve

311639

1" x 1/2" x 1/2" Tee

311390

1/2" x 4" Galv. Nipple

310306-G

1/2" x 2 1/2" Nipple

310303

1/2" Velocity Check Valve

323300

*Items included with basic valve.

NOVEMBER 2012

Page 11 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE 6” MODEL “G-3” TRIM ARRANGEMENT 34

31 27 53

31 52

17 11 14

ACCELERATOR/AFD TRIM 300465-2

26 11 35

23 75

51 23

30 56

B 24

80 45

24 30

75 23

VALVE ONLY MODEL "G-3" 319824

BASIC TRIM ONLY 319823

9 2

VALVE FACTORY TRIMMED MODEL "G-3" 319829 VALVE FACTORY TRIMMED W/ ACCELERATOR & AFD W/TRIM MODEL "G-3" 319831

6 55

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd.

Det. No.

Description

Part No.

Req'd. 1

2" Street Elbow

311209

1/4" Street Elbow

311211

Model "C" Accelerator

300400

2" Close Nipple

310800

1/4" Close Nipple

310100

Model "C" Anti-Flooding Device

323332

2" Angle Valve

311617

1/4" Union

311401

1/4" x 1/4" Tube Male Connector

320605

2" x 2" x 3/4" Tee

311323

1/4" Ball Valve

311690

1/4" Copper Tubing

M-320604

3/4" Close Nipple

310400

1/4" 3-Way Valve

311683

1/4" x 3 1/2" Nipple

310105

3/4" Check Valve

311640

1/4" x 2 1/2" Nipple

310103

1/4" x 4 1/2" Nipple

310107

3/4" Street Elbow

311206

1/4" Tee

311301

1/4" x 5 1/2" Nipple

310109

Drip Cup

300122

1/4" x 2" Nipple

310102

1" x 1/2" Bushing

311107

Priming Cup

300470

1/4" Plug

311001

1/4" x 1/4" Tube Female Elbow

311199

1/2" Close Nipple

310300

1/4" Globe Valve

311600

1/2" Ball Valve

311692

1 1

1/2" Elbow

311203

3 1/2" Water Gauge (0-300psi)

300119

3/4" x 1/2" x 1/2" Tee

311318

1/2" x 4" Nipple

310306

3 1/2" Air Gauge

300120

1/2" Plug

311016

1/2" Angle Valve

311612

1" Plug

311005

3/4" x 2 1/2" Nipple

310402

1" Close Nipple

1/2" x 1 1/2" Galv. Nipple

310500

1" x 2" Galv. Nipple

310501-G

3 1/2" Accelerator (Air) Gauge

300420

310301-G

1" x 1/2" x 1/2" Tee

311309

1/2" Close Galv. Nipple

310300-G

1" Cross

300107

1/2" Velocity Check Valve

323300

1/2" x 2 1/2" Galv. Nipple

310303-G

1/2" Soft Seat Check Valve

311639

1/2" x 1/4" x 1/2" Tee

311305

1/2" x 4" Galv. Nipple

310306-G

1/2" x 2 1/2" Nipple

310303

1/2" Check Valve w/Vented Clapper

311639-V

81*

1" Street Elbow

311207

1/4" Elbow

311201

*Items included with basic valve.

NOVEMBER 2012

Page 12 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

GLOBE DRY PIPE VALVE INSTALLATION AND MAINTENANCE GUIDE OPTIONAL ALARM PRESSURE SWITCH TRIM FOR USE WHEN SWITCH IS PROVIDED WITHOUT MECHANICAL ALARM, TO PREVENT AIR LOCKS

FOR USE WHEN SWITCH IS PROVIDED WITH MECHANICAL ALARM

6 2 7

TO DRAIN 1

FROM EXISTING TRIM

Part Number 323485 (Trim Only (Det. No. 1-2)) Det. No.

Description

Part Number 323478 (Trim Only (Det. No. 1-4, 6 & 7))

Part No.

Req'd.

Det. No. 1

3/4" x 4 1/2" Nipple

310406

1/2" x 4" Nipple

310306

1/2" Elbow

311203

3/4" x 1/2" x 1/2" Tee

311318

Alarm Line Bleeder

320506

1/2" Coupling

311423

Pressure Switch* (Sold Separately)

301650

1/2" x 4" Nipple

310306

1/2" Elbow

311203

Pressure Switch* (Sold Separately)

301650

Description

Part No.

Req'd.

*NOTE: Other Pressure Switches available upon request. May be substituted depending on application.

NOVEMBER 2012

Page 13 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN D.P.V.I.M., REV. #12

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

RETARDING CHAMBER MODEL H

DESCRIPTION AND OPERATION The Globe Model â&#x20AC;&#x153;Hâ&#x20AC;? Retarding Chamber is an accessory which is used with variable pressure wet sprinkler systems where water motor alarms and / or pressure switches are used in conjunction with Globe's Alarm Check Valves. It serves primarily as a hydraulic time delay to prevent most false alarms associated with fluctuating water supply pressures. In situations where excessive water pressure surges occur, the Model H Retarding Chamber is needed to collect excess water from the Alarm Check Valve and feed water back into the main drain, before activating the alarm. An additional retarding chamber could be needed if pressure surges exceed the capacity of one retarding chamber. Water enters the retarding chamber through the 1/2" NPT Inlet and automatically flows through a restricted orifice and to drain; when the drain capacity is exceeded, as when the alarm check valve clapper remains open or when the system is being tested, the retarding chamber capacity is reached, and water then flows through the Outlet to the water motor alarm and/or electric alarm switch. The body of the Retarding Chamber has considerable ductility to reduce damage in field handling. All interior operating parts are machined from highly corrosive-resistant alloys, each having high strength and good wear resistance.

APPROVALS

MODEL H RETARD CHAMBER

cULus Listed FM Approved LPCB Approved

TECHNICAL DATA

Water Working Pressure Rating - 175 psi (12 bars). Factory tested hydrostatically to 350 psi (24 bars). Capacity - 1 Gallon (3.785 liters) Body - High Tensile Cast Iron

NOVEMBER 2012

D-1 www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN RET.CHM., REV. #3

GLOBAL FIRE AND SECURITY SOLUTIONS, SAS info@globalfire.com.co

RETARDING CHAMBER MODEL H DIMENSIONS

CROSS SECTION 1

3/4"NPT OUTLET

2 1/2"

1/2"NPT INLET 7 8

6 5/8" DIA. 14 1/2"

4 5 1/2"NPT DRAIN

Det. No.

Description

Material

Part No. 323354

Outlet Bushing

Cast Iron

Machined Body

Cast Iron

323352

Hex Head Machine Screw

Brass

323357

Cup

Brass

323356

Strainer Screen

Brass

323355

Drain Bushing

Brass

Nameplate

Drive Screw (2)

323353 *323362

Aluminum

323361

Stainless Steel

323420

*FOR USE WHEN RETARD CHAMBER IS INSTALLED WITH 3" ALARM CHECK VALVES.

Refer to Globe’s Alarm Check Valve Installation and Maintenance Guide (Bulletin A.C.V.I.M.) for trim set-up, installation instructions, and maintenance.

ORDERING INFORMATION SPECIFY Quantity

GLOBE® PRODUCT WARRANTY

Model Number

4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 FAX 989-846-9231 1-800-248-0278 www.globesprinkler.com NOVEMBER 2012

PRINTED U.S.A. www.globalfire.com.co - PBX: (+571) 898.54.55

BULLETIN RET.CHM., REV. #3

Mangueras â&#x20AC;&#x201C; Gabinetes

EQUIPO CONTRA INCENDIO CLASE I DE SOBREPONER

ITEM DESCRIPCIÓN GABINETE PARA EQUIPO CONTRA INCENDIO FABRICADO EN LAMINA COLD ROLLED CAL.20 DE 77x77x22 (ALTO1 2 3 4

5 6 7 8

ANCHO-FONDO) DE SOBREPONER, TERMINADO EN PINTURA ELECTROSTÁTICA ROJA, CON CERRADURA DE LLAVE MAESTRA, SIN VIDRIO. (COD. 003305) VALVULA ANGULAR TIPO GLOBO EN BRONCE DE 1. 1/2” x 1. 1/2” NPT x NH (HEMBRA-MACHO). (COD. 009602) SOPORTE TIPO CANASTILLA PARA MANGUERA GABINETERA, FABRICADO EN LAMINA COLD ROLLED TERMINADO EN PINTURA ELECTROSTATICA ROJA. (COD.007502) TRAMO DE MANGUERA DE 1. 1/2” x 100 PIES (30 METROS) ACOPLADA, COMPUESTA DE UN TEJIDO EXTERIOR 100% POLIÉSTER Y UN TUBO INTERIOR EN CAUCHO SINTÉTICO. PRESIÓN DE SERVICIO 150 PSI, PRESION DE PRUEBA 300 PSI, PRESION DE ROTURA 500 PSI, CUMPLE NORMA DE FABRICACIÓN Y MANTENIMIENTO NFPA 1961 Y 1962. IMPORTADA. HOSEKING. (COD. 090005) BOQUILLA DE CHORRO Y NIEBLA DE 1. 1/2” EN POLICARONATO, MARCA GIACOMINI, CERTIFICADA “UL” COD. 000914 HACHAPICO DE 4 1/2 LIBRAS EN ACERO, TERMINADO EN PINTURA ELECTROSTATICA ROJA, CABO CURVO EN MADERA TERMINADO EN LACA CATALIZADA IMPORTADA. (COD. 004205) LLAVE SPANNER UN SERVICIO, FABRICADA EN HIERRO Y TERMINADA EN PINTURA ELCTROSTATICA ALUMINIO. (COD. 005108) EXTINTOR DE POLVO QUIMICO SECO BC DE 10 LIBRAS DE CAPACIDAD. MARCA PRODESEG, PRESURIZADO CON NITROGENO, VALVULA DE DESCARGA EN BRONCE CON BOQUILLA Y MANOMETRO DE CONTROL. (COD. 120005)

$537.382

EQUIPO CONTRA INCENDIO CLASE I DE INCRUSTAR

ITEM DESCRIPCIÓN GABINETE PARA EQUIPO CONTRA INCENDIO FABRICADO EN LAMINA COLD ROLLED CAL.20 DE 77x77x22 (ALTO1 2 3 4

5 6 7 8

ANCHO-FONDO) DE INCRUSTAR, TERMINADO EN PINTURA BASE ANTICORROSIVA ROJA, CON CERRADURA DE LLAVE MAESTRA, SIN VIDRIO. VALVULA ANGULAR TIPO GLOBO EN BRONCE DE 1. 1/2” x 1. 1/2” NPT x NH (HEMBRA-MACHO). SOPORTE TIPO CANASTILLA PARA MANGUERA GABINETERA, FABRICADO EN LAMINA COLD ROLLED TERMINADO EN PINTURA ELECTROSTATICA ROJA. TRAMO DE MANGUERA DE 1. 1/2” x 100 PIES (30 METROS) ACOPLADA, COMPUESTA DE UN TEJIDO EXTERIOR 100% POLIÉSTER Y UN TUBO INTERIOR EN CAUCHO SINTÉTICO. PRESIÓN DE SERVICIO 150 PSI, PRESION DE PRUEBA 300 PSI, PRESION DE ROTURA 500 PSI, CUMPLE NORMA DE FABRICACIÓN Y MANTENIMIENTO NFPA 1961 Y 1962. IMPORTADA. HOSEKING BOQUILLA DE CHORRO Y NIEBLA DE 1. 1/2” EN POLICARBONATO CERTIFICADA UL HACHAPICO DE 4 1/2 LIBRAS EN HIERRO, TERMINADO EN PINTURA ELECTROSTATICA ROJA, CABO CURVO EN MADERA TERMINADO EN LACA CATALIZADA LLAVE SPANNER UN SERVICIO, FABRICADA EN HIERRO Y TERMINADA EN PINTURA ELCTROSTATICA ALUMINIO. EXTINTOR DE POLVO QUIMICO SECO BC DE 10 LIBRAS DE CAPACIDAD. MARCA PRODESEG, PRESURIZADO CON NITROGENO, VALVULA DE DESCARGA EN BRONCE CON BOQUILLA Y MANOMETRO DE CONTROL.

ALTERNATIVAS TRAMO DE MANGUERA DE 1. 1/2”x 100 PIES (30 METROS) ACOPLADA, MARCA KIDDE, PRESIÓN DE SERVICIO 150 PSI. BOQUILLA DE CHORRO Y NIEBLA DE 1. 1/2” EN NYLON HACHAPICO DE 4 1/2 LBS EN ACERO, TERMINADO EN PINTURA ELECTROSTATICA ROJA IMPORTADA EXTINTOR MULTIPROPOSITO ABC DE 10 LIBRAS CON BOQUILLA

GABINETE CLASE 3 DE SOBREPONER CON PINTURA ANTICORROSIVA O EN ACERO INOXIDABLE CON DOTACION

Codigo:

Referencia:

Los gabinetes de emergencia son diseñados para el uso rápido y efectivo de los elementos disponibles dentro del mismo (hacha, extintor, llave spanner, manguera). Los gabinetes están fabricados en lamina cold rolled calibre 20 (con pintura anticorrosiva) y lamina calibre 20 acero inoxidable temple 304, con las medidas especificadas según sea clase I, II o III. Laminas troqueladas y soldadas para el cajón y la puerta, soportes para canastilla, llave y hacha remachados. Cerradura maestra. Terminación en marco para gabinetes de sobreponer. Acometida (agujero lateral) para tubería de Ø1 ½’’ y Ø2 ½’’ (clase III). Posición de las acometidas y apertura de la puerta según especificaciones del cliente. El gabinete contiene: Un hacha Una llave spanner Una válvula angular 1 ½´´ en bronce con tapa y cadena Una válvula angular 2 ½´´ en bronce con tapa y cadena Un extintor ABC o BC de 10 lbs Una manguera sintetica de 100ft de 1 ½´´ resistente a hidrocarburos UL o FM

OFERTA EQUIPO CONTRA INCENDIO CLASE III - SOBREPONER

ÍTEM 1 2 3 4 5

6 7 8 9

DESCRIPCIÓN GABINETE PARA EQUIPO CONTRA INCENDIO FABRICADO EN LAMINA COLD ROLLED CAL.20 DE 99x77x24 CM (ALTOANCHO-FONDO) DE SOBREPONER, TERMINADO EN PINTURA ELECTROSTÁTICA ROJA, CON CERRADURA DE LLAVE MAESTRA, SIN VIDRIO. (COD.003605) VALVULA ANGULAR TIPO GLOBO EN BRONCE DE 1. 1/2” x 1. 1/2” NPT x NH (HEMBRA-MACHO). (COD. 009602) VALVULA ANGULAR TIPO GLOBO EN BRONCE DE 2. 1/2” x 2. 1/2” NPT x NH (HEMBRA-MACHO). (COD.009605) SOPORTE TIPO CANASTILLA PARA MANGUERA GABINETERA, FABRICADO EN LAMINA COLD ROLLED TERMINADO EN PINTURA ELECTROSTATICA ROJA. (COD. 007502) TRAMO DE MANGUERA DE 1. 1/2” x 100 PIES (30 METROS) ACOPLADA, COMPUESTA DE UN TEJIDO EXTERIOR 100% POLIÉSTER Y UN TUBO INTERIOR EN CAUCHO SINTÉTICO. PRESIÓN DE SERVICIO 150 PSI, PRESION DE PRUEBA 300 PSI, PRESION DE ROTURA 500 PSI, CUMPLE NORMA DE FABRICACIÓN Y MANTENIMIENTO NFPA 1961 Y 1962. IMPORTADA. HOSEKING. (COD. 090005) BOQUILLA DE CHORRO Y NIEBLA DE 1. 1/2” EN POLICARBONATO, MARCA GIOACOMINI, CERTIFICADA “UL” (COD. 090005) HACHAPICO DE 4 1/2 LIBRAS EN ACERO, TERMINADO EN PINTURA ELECTROSTATICA ROJA, CABO CURVO EN MADERA TERMINADO EN LACA CATALIZADA IMPORTADA. (COD. 000914) LLAVE SPANNER DOS SERVICIOS, FABRICADA EN HIERRO Y TERMINADA EN PINTURA ELCTROSTATICA ALUMINIO. (COD. 005111) EXTINTOR DE POLVO QUIMICO SECO BC DE 10 LIBRAS DE CAPACIDAD. MARCA PRODESEG, PRESURIZADO CON NITROGENO, VALVULA DE DESCARGA EN BRONCE CON BOQUILLA Y MANOMETRO DE CONTROL. (COD.120005)

GENERAL CATALOGUE

FIRE IREP PROTECTION products

November 2006

0163EN

Summary

FIRE PROTECTION PRODUCTS A53 A53G A50 A51 A55 A56 A85 A86 A155 A156 A201

Gate Valve 300 lb. Rated Single Hydrant Gate Valve Angle Hose Valve with Hydrolator Angle Hose Valve with Hydrolator Angle Hose Valve 300 lb. Rated Angle Hose Valve 300 lb. Rated Straight Globe Valve 300 lb.Rated Straight Globe Valve 300 lb.Rated Pressure Reducing Device Angle Valve Pressure Reducing Device Angle Valve Angle Pressure Reducing Valve with Cheking Device A202 Angle Pressure Reducing Valve A203 Straight Pressure Reducing Valve with Cheking Device A204 Straight Pressure Reducing Valve A170 Monitor Switch Adapter A95 Straight Single Clapper Two-Way Inlets A96 90° Single Clapper Two-Way Inlets A97 Straight Two-Way Male Outlets A97 Straight Three-Way Male Outlets A98 90° Two-Way-Male Outlets A98 90° Three-Way Male Outlets A101 Straight Concealed Siamese A102 90° Concealed Siamese SPECIFY THREAD A105 Straight Double Clapper Two-Way Inlets A105 Straight Triple Clapper Three-Way Inlets A106 90° Double Clapper Two-Way Inlets A106 90° Triple Clapper Three-Way Inlets A103 Square Plate A107 Round Plate A99 Leader Line Dual Ball Valve A65 Hose Rack Mounting Nipple A75 Female to Male Reducer A90 Female Open Snoot A91 Male Open Snoot A83 Female Open Snoot Base A87 Male Open Snoot Base A88 Male to Male Adapter A88G Male to Groove Adapter A89 Swivel A92 Male to Male Adapter A93 Female to Male Adapter A94 Female to Female Adapter A104 Bushing A90C Female Check Snoot A91C Male Check Snoot

SPECIFY THREAD

4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26

FLUSH FIRE DEPT. INLET CONNECTIONS CLAPPER SNOOT TYPE A111 End Outlet body A112 Back Outlet body A113 Angle Outlet bodyCERTIFICATIONS FLUSH FIRE DEPT. INLET CONNECTIONS CLAPPER SNOOT TYPE - Four way Square Body A114 Back Outlet body A115 Angle Outlet body FLUSH FIRE DEPT. INLET CONNECTIONS CLAPPER BODY TYPE A121 End Outlet body A122 Back Outlet body A123 Angle Outlet body FLUSH FIRE DEPT. INLET CONNECTIONS CLAPPER BODY TYPE - Four way Square Body A124 Back Outlet body A125 Angle Outlet body A190T Single Inlet Connection A140 Swing Check Valve A80 Cap and Chain A81 Plug and Chain A80P Cap and Chain in Plastic A80PC Cap and Chain in Plastic Chrome Plated A70 Double Jacket Brass Coupling A70 Single Jacket Brass Coupling A71 Forestry Coupling A7A Adjustable Fog Nozzle A7B Adjustable Fog Nozzle with Bumper A7B Storz Adjustable Fog Nozzle with Bumper A7BP Plastic Adjustable Fog Nozzle with Bumper A58 Automatic Ball Drip CERTIFICATIONS A59 Line-Tester A91AD Brass Automatic Drain Valve R910 Full Port Ball Valve A61 Test and drain valve Quantity

27 27 28

28 29

29 30 30

31 31

32 32 33 33 34 34 35-36 37 37 38 38 39 39 40 40 41 41 42 43

Please always indicate your requirements using our abbreviations and part numbers. On request Computer Programs (IBM or IBM compatible) on Pressure Control Valves are available. AbbThread M= Male F= Female Lugs R= Rocker Lug P= Pin Lug nal s RB= Rough Brass RC= Rough Chrome PB= Polished Brass PC= Polished Chrome RP= Red Painted 1

November 2006

0163EN

Certifications

FIRE PROTECTION PRODUCTS

Insatallation

Gate Valve 300 Lb. Rated A53 Straightway pattern, non-rising stem, 300 lb. hose gate valves are intended for use on standpipes, fire pumps and hydrants.

CERTIFICATIONS

APPROVED LISTED 618R

FEMALE X MALE a

Standard equipment: Female NPT inlet x male hose thread outlet, forged brass with red hand wheel, solid wedge disc with tapered seats. Available without cap and chain.

2 Optional Finishes: PB RC PC

1/2”

3”

D C SPECIFY THREAD

2 1/2” 2 1/2”

2” x 2 1/2”

3” x 2 1/2”

5 5/32”

9 19/64“

4 11/32“

4 17/32“

2 17/64“

1 57/64“

Single Hydrant Gate Valve A53G Straightway pattern, non-rising stem, 300 lb. hose gate valves are intended for use on standpipes, fire pumps and hydrants.

CERTIFICATIONS

LISTED 618R

Standard equipment: Brass body with brass trim, pin lug, female hose thread swivel inlet x male hose thread outlet. Red hand wheel.

a b

Note: Particularly used when space limitation or appearance preclude a permanet type installation.

2 1/2”

Optional Trim: Swivel inlet with rocker lugs. B

E D C SPECIFY THREAD

2” x 2 1/2” A

5 5/32”

9 19/64”

5 13/64”

2 17/64”

1 57/64”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Angle Hose Valve With Hydrolator A50 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection.

CERTIFICATIONS

DOUBLE FEMALE CE x 589

Standard equipment: Female NPT inlet and outlet forged brass valve. Red hand wheel.

b a

Optional Finishes: PB RC PC

1/2”

1 1/2”

1 1/2” x 1 1/2” B

4 1/64”

7 11/16”

2 9/64”

1 57/64”

Angle Hose Valve With Hydrolator A51 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection.

CERTIFICATIONS

FEMALE x MALE CE x 589

Standard equipment: Female NPT inlet x male hose thread outlet forged brass valve. Red hand wheel.

b a

Optional Finishes: PB

1 1/2”

1 1/2” x 1 1/2” B

4 1/64”

7 11/16”

2 1/2”

1 57/64”

Angle Hose Valve 300 Lb. Rated A55 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection.

CERTIFICATIONS

DOUBLE FEMALE APPROVED CE x 589 LISTED 618R

Standard equipment: Female NPT inlet and outlet forged brass valve. Red hand wheel.

b a

Optional Finishes: PB RC PC

1/2”

1 1/2”

2 1/2”

1 1/2” x 1 1/2” 2 1/2” x 2 1/2”

4 1/64”

5 1/8”

7 11/16”

10 9/16”

2 9/64”

3 5/32”

1 57/64”

2 41/64”

Angle Hose Valve 300 Lb. Rated A56 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection.

CERTIFICATIONS

FEMALE X MALE APPROVED CE x 589 LISTED 618R

Standard equipment: Female NPT inlet x male hose thread outlet forged brass valve. Red hand wheel.

b a

Optional Finishes: PB RC PC

1 1/2”

2 1/2”

1 1/2” x 1 1/2” 2 1/2” x 2 1/2”

C SPECIFY THREAD

4 1/64”

5 1/8”

7 11/16”

10 9/16”

2 17/64”

3 3/16”

1 57/64”

2 41/64”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Straight Globe Hose Valve 300 Lb. Rated A85 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection. Ideal for wet and combination system.

CERTIFICATIONS

CE x 589

DOUBLE FEMALE a Standard equipment: Female NPT inlet and outlet cast brass valve, 300 lb. Red hand wheel.

2 1/2”

2 1/2” x 2 1/2” B

5 1/8”

10 53/64”

6 15/16”

2 5/8”

Straight Globe Hose Valve 300 Lb. Rated A86 Used with a Fire Hose Rack Assembly, or as a Fire Dept. outlet connection. Ideal for wet and combination system.

CERTIFICATIONS

CE x 589

FEMALE X MALE a

Standard equipment: Female NPT inlet x male hose thread outlet cast brass valve, 300 lb. Red hand wheel.

2 1/2”

2 1/2” x 2 1/2” B

5 1/8”

10 53/64”

7 3/64”

2 5/8”

C SPECIFY THREAD

Pressure Reducing Device Angle Valve 175 Lb. Rated A155 Adjustable restriction of residual pressures up to 175 lb. Locking pin device restricts full opening of valve by untrained personnel, pin may be removed by firefighters to allow full opening of valve.

CERTIFICATIONS

APPROVED CE x 1258 LISTED 12HO

DOUBLE FEMALE

Standard equipment: Female NPT inlet and outlet forged brass valve. Red hand wheel.

a A

Optional Finishes: PB RC PC

1/2”

1 1/2”

2 1/2”

1 1/2” x 1 1/2” 2 1/2” x 2 1/2”

4 1/64”

5 1/8”

7 3/32”

9 31/32”

2 9/64”

3 5/16”

1 57/64”

2 41/64”

D C

Pressure Reducing Device Angle Valve 175 Lb. Rated A156 Adjustable restriction of residual pressures up to 175 lb. Locking pin device restricts full opening of valve by untrained personnel, pin may be removed by firefighters to allow full opening of valve.

CERTIFICATIONS

APPROVED CE x 1258 LISTED 12HO

FEMALE X MALE

Standard equipment: Female NPT inlet x male hose thread outlet forged brass valve. Red hand wheel.

a A

Optional Finishes: PB RC PC

1 1/2”

2 1/2”

2 1/2” x 2 1/2” 2 1/2” x 2 1/2”

4 1/64”

5 1/8”

7 3/32”

9 31/32”

2 17/64”

3”

1 57/64”

2 41/64”

SPECIFY THREAD

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Angle Pressure Reducing Valve With Checking Device A201 400lb. field adjustable automatic pressure regulating valve for use as a fire hose rack assembly valve or sprinkler control valve where pressure requires regulation.

CERTIFICATIONS

CE x 1259 LISTED 12HO

DOUBLE FEMALE b

Standard equipment: Cast bronze valve with Female NPT inlet and outlet. Visual indicator. Red hand wheel.

a A

For technical informations see section 9.

1/2”

2 1/2”

2 1/2” x 2 1/2” B

7 1/8”

17 27/32”

3 13/32”

3 3/4”

Angle Pressure Reducing Valve A202 400lb. field adjustable automatic pressure regulating valve for use as a fire hose rack assembly valve or sprinkler control valve where pressure requires regulation.

CERTIFICATIONS

CE x 1259 LISTED 12HO

FEMALE X MALE b

Standard equipment: Cast bronze valve with Female NPT inlet x male hose thread outlet. Visual indicator. Red hand wheel.

a A

For technical informations see section 9.

2 1/2”

2 1/2” x 2 1/2” B

7 7/8”

17 27/32”

3 15/32”

3 3/4”

C SPECIFY THREAD

Straight Pressure Reducing Valve With Checking Device A203 400lb. field adjustable automatic pressure regulating valve for use as a fire hose rack assembly valve or sprinkler control valve where pressure requires regulation.

CERTIFICATIONS

CE x 1259 LISTED 12HO

DOUBLE FEMALE a Standard equipment: Cast bronze valve with Female NPT inlet and outlet. Visual indicator. Red hand wheel.

1/2”

2 1/2”

For technical informations see section 9.

D B

Straight Pressure Reducing Valve A204 400lb. field adjustable automatic pressure regulating valve for use as a fire hose rack assembly valve or sprinkler control valve where pressure requires regulation.

CERTIFICATIONS

CE x 1259 LISTED 12HO

FEMALE X MALE a

Standard equipment: Cast bronze valve with Female NPT inlet x male hose thread outlet. Visual indicator. Red hand wheel.

b A

For technical informations see section 9.

2 1/2”

2 1/2” x 2 1/2” D

C SPECIFY THREAD

7 7/8”

15 15/16”

8”

14 11/16”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Monitor Switch Adapter A170 To be installed on pressure reducing valves A201 - A202 - A203 - A204

A170 A

3 1/4”

3 37/64”

1 57/64”

Straight Single Clapper Two-Way Inlets A95 Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

Standard equipment: Cast brass two-way inlet body with single swing clapper and pin or rocker lug hose thread swivel; straight NPT outlet connection. Branding: “AUTO SPKR”

CERTIFICATIONS

APPROVED CE x 1191 LISTED 166Y

4”

2 1/2”

Optional Finishes: RP

4” x 2 1/2” A

5 33/64”

8 5/64”

SPECIFY THREAD

90° Single Clapper Two-Way Inlets A96 Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

Standard equipment: Cast brass two-way inlet body with single swing clapper and pin or rocker lug hose thread swivel; angle NPT outlet connection.

CERTIFICATIONS

CE x 1191 LISTED 166Y

4”

2 1/2”

Branding: “AUTO SPKR”

4” x 2 1/2” Optional Finishes: RP

SPECIFY THREAD

8 5/64”

6 11/16”

4 29/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Straight Two-way Male Outlets A97 Used as a standpipe roof outlet connection by the fire service. Provides 250 G.P.M. minimum per outlet. Used with straight or angle hose valves to provide water control

Standard equipment: Cast brass body with female NPT inlet and male NPT or male hose thread outlets. Straight connection.

4”

2 1/2”

6”

2 1/2”

4” x 2 1/2”

6” x 2 1/2”

4 57/64”

5 23/32”

6 57/64”

8 5/8”

4”

2 1/2”

6”

2 1/2”

SPECIFY THREAD

Straight Three-way Male Outlets A97 Used as a standpipe roof outlet connection by the fire service. Provides 250 G.P.M. minimum per outlet. Used with straight or angle hose valves to provide water control

b b

b b B

Standard equipment: Cast brass body with female NPT inlet and male NPT or male hose thread outlets. Straight connection.

4” x 2 1/2”

6” x 2 1/2”

6 21/32”

6 57/64”

10 11/16”

5 3/64”

7 3/32”

SPECIFY THREAD

90° Two-way Male Outlets A98 Used as a standpipe roof outlet connection by the fire service. Provides 250 G.P.M. minimum per outlet. Used with straight or angle hose valves to provide water control

Standard equipment: Cast brass body with female NPT inlet and male NPT or male hose thread outlets. Straight connection.

4”

2 1/2”

6”

2 1/2”

4” x 2 1/2”

6” x 2 1/2”

6 7/64”

8 9/64”

7 11/64”

9 1/64”

4 29/32”

4 33/64”

4”

2 1/2”

6”

2 1/2”

SPECIFY THREAD

90° Three-way Male Outlets A98 Used as a standpipe roof outlet connection by the fire service. Provides 250 G.P.M. minimum per outlet. Used with straight or angle hose valves to provide water control

a b

b b B

Standard equipment: Cast brass body with female NPT inlet and male NPT or male hose thread outlets. Straight connection.

4” x 2 1/2”

6” x 2 1/2”

6 15/32”

8 35/64”

6 21/32”

9 27/32”

5 3/64”

7 3/32”

5 21/64”

4 29/64”

5 55/64”

7 59/64”

SPECIFY THREAD

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Straight Concealed Siamese A101 Concealed auxiliary inlet with 500 G.P.M. inlet capacity to supplement Fire Protection water supply.

CERTIFICATIONS

Standard equipment: Cast brass two-way inlet body with double drop clappers; NPT Threads.

APPROVED CE x 1191 LISTED 175

b b

4”

2 1/2”

4”

3”

6”

2 1/2”

4” x 2 1/2”

4” x 3”

6” x 2 1/2”

5 61/64”

6 31/64”

8 19/64”

10 55/64”

12 1/16”

11 31/64”

3 3/64”

5 19/64”

7 3/32”

7”

7 5/8”

90° Concealed Siamese A102 Concealed auxiliary inlet with 500 G.P.M. inlet capacity to supplement Fire Protection water supply.

CERTIFICATIONS

Standard equipment: Cast brass two-way inlet body with double drop clappers; NPT Threads.

APPROVED CE x 1191 LISTED 618R

b b

Note: One body can serve as bottom or top feed by changing clappers. a

4”

2 1/2”

4”

3”

6”

2 1/2”

4” x 2 1/2”

4” x 3”

6” x 2 1/2”

6 1/64”

6 1/2”

8 39/64”

10 55/64”

12 1/16”

12 15/32”

5 25/32”

6 9/32”

6 21/64”

7”

7 5/8”

Straight Double Clapper Two-way Inlets A105 Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

Standard equipment: Cast brass two-way inlet body with double drop clappers and pin lug hose thread swivels; straight NPT outlet connection.

Branding: A105/1 - AUTO-SPKR A105/2 - STANDPIPE A

CERTIFICATIONS

APPROVED LISTED 166Y

4”

2 1/2”

4”

3”

6”

2 1/2”

6”

3”

4” x 2 1/2”

4” x 3”

6” x 2 1/2”

6” x 3”

7 9/32”

8 1/32”

8 5/32”

8 23/32”

11 21/32”

12 27/32”

11 21/32”

12 7/8”

4”

2 1/2”

6”

2 1/2”

SPECIFY THREAD

Straight Triple Clapper Three-way Inlets A105 a

b B

Standard equipment: Cast brass three-way inlet body with triple drop clappers and pin lug hose thread swivels; straight NPT outlet connection. Branding: A105/1 - AUTO-SPKR A105/2 - STANDPIPE

SPECIFY THREAD

Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

4” x 2 1/2”

6” x 2 1/2”

9 17/64”

15 13/64”

7 3/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS 90° Double Clapper Two-way Inlets A106 Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

Standard equipment: Cast brass two-way inlet body with double drop clappers and pin lug hose thread swivels; angle NPT outlet connection.

Branding: A106/1 - AUTO-SPKR A106/2 - STANDPIPE

CERTIFICATIONS

APPROVED LISTED 166Y

4”

2 1/2”

4”

3”

6”

2 1/2”

6”

3”

B SPECIFY THREAD

4” x 2 1/2”

4” x 3”

6” x 2 1/2”

6” x 3”

8 31/64”

9 3/32”

9 15/32”

10 3/32”

11 21/32”

12 27/32”

11 21/32”

12 7/8”

5 25/64”

5 21/32”

5 25/64”

5 57/64”

4”

2 1/2”

6”

2 1/2”

90° Triple Clapper Three-way Inlets A106

b b

Standard equipment: Cast brass three-way inlet body with triple drop clappers and pin lug hose thread swivels; angle NPT outlet connection.

Exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements.

Branding: A106/1 - AUTO-SPKR A106/2 - STANDPIPE

4” x 2 1/2”

6” x 2 1/2”

11 29/64”

15 13/64”

5 25/64”

SPECIFY THREAD

Plate A103 Suitable to A101 -A102 Standard equipment: Cast brass two-way inlet body with double drop clappers.

A103 A

9 3/32”

15 3/64”

Branding: A103/1 - AUTO-SPKR A103/2 - STANDPIPE A103/3- AUTO-SPKR STANDPIPE A103/4 - WALL HYDRANT A103/5 - PLAIN BUT UL EMBLEM

Optional Finishes: PB PC

A107 Round identification plate. Branding: AUTO-SPKR

4”

A107 A

9 3/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Leader Line Dual Ball Valve A99 b

Chrome plated furnished with rocker lug swivels.

Standard equipment: Red painted.

1/2”

1 1/2”

2 1/2” x 1 1/2”

4 13/32”

5 35/64”

6 7/64”

8 15/64”

1 1/2”

2 1/2”

D B

SPECIFY THREAD

Hose Rack Mounting Nipple A65 b

Used to mount or hold rack. Standard equipment: Forged brass finish valve with male NPT inlet x male hose thread outlet.

Optional Finishes: RB PB RC PC

1 1/2” x 1 1/2” 2 1/2” x 2 1/2” A

2 9/16”

3 7/64”

59/64”

1 11/32”

SPECIFY THREAD

Female To Male Reducer A75 a

Used to reduce or change Fire Hose threads. Standard equipment: Forged brass with pin or rocker lugs with female thread larger than male thread.

1/2”

3/4”

2 1/2”

1 1/2”

2 1/2”

2”

2 1/2” x 3/4” 2 1/2” x 1 1/2” 2 1/2” x 2” A

1 1/16”

49/64”

5/8”

49/64”

2 1/2”

3”

A B

SPECIFY THREAD

Female Open Snoot A90 a

Used to connect fire hose standpipe or sprinkler system. FEMALE (SWIVEL) x FEMALE Standard equipment: Polish brass with female (pin lug swivel) hose inlet x female NPT outlet.

Swivel furnished with pin or rocker lugs. Optional Finishes: PC

SPECIFY THREAD

2 1/2” x 2 1/2”

2” 1/2 x 3”

1 7/8”

2 1/64”

13/16”

1 1/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Male Open Snoot A91 a

Used to connect fire hose standpipe or sprinkler system. FEMALE (SWIVEL) x MALE Standard equipment: Forged brass with female (pin lug swivel) hose inlet x male NPT outlet.

1/2”

1 1/2”

2 1/2”

2”

2 1/2”

3”

Swivel furnished with pin or rocker lugs.

1 1/2” x 1 1/2”

2 1/2” x 2”

2 1/2” x 2 1/2”

2 1/2” x 3”

8 5/8”

10 57/64”

10 31/32”

13/16”

51/64”

1 15/64”

1 13/64”

MALE x FEMALE

2 1/2”

Standard equipment: Forged brass with female hose inlet x female NPT outlet.

2 1/2”

3”

Optional Finishes: PB RC PC A

SPECIFY THREAD

Female Open Snoot Base A83 a

To be used on any thread swivel A89

2 1/2” x 2 1/2”

2 1/2” x 3”

1 3/4”

2 5/64”

SPECIFY THREAD

Male Open Snoot Base A87 a

To be used on any thread swivel A89

MALE x FEMALE

Standard equipment: Forged brass with female hose inlet x male NPT outlet.

2 1/2”

3”

2 1/2”

3”

1/2”

2”

Male To Male Adapter A88 a

SPECIFY THREAD

To convert NPT female thread to male hose thread.

2 1/2” x 2 1/2”

2 1/2” x 3”

1 29/64”

1 31/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Male To Groove Adapter A88G a

To convert NPT female thread to Groove thread.

1/2”

2 1/2” 4”

4”

2 1/2” x 2 1/2” b

3/64”

4”x 4”

2 3/64”

Swivel A89 Available with pin or rocker lugs.

2 1/2”

3”

4 1/2”

5 15/64”

1 29/64”

1 1/2”

SPECIFY THREAD

Male To Male Adapter A92 a

To adapt or reduce threads, and change NPT pipe thread to hose thread.

1/2”

1 1/2”

MALE x MALE

2 1/2”

2”

Standard equipment: Brass hexagon type.

2 1/2”

3”

1 1/2” x 1 1/2”

2 1/2” x 2”

2 1/2” x 2 1/2”

2 1/2” x 3”

61/64”

1 7/16”

1 25/64”

13/16”

1 15/64”

1 19/64”

1 1/2”

2 1/2”

2”

1 1/2” x 1 1/2”

2 1/2” x 2”

2 1/2” x 2 1/2”

51/64”

1 3/64”

1 9/64”

39/64”

53/64”

1”

SPECIFY THREAD

Female To Male Adapter A93 a

To adapt or reduce threads or change NPT pipe thread to hose thread. FEMALE X MALE Standard equipment: Brass hexagon type.

1/2”

SPECIFY THREAD

2 1/2”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Female To Female Adapter A94 a

For thread conversion

FEMALE x FEMALE

1/2”

1 1/2”

Standard equipment: Brass hexagon type.

2 1/2”

1 1/2” x 1 1/2” 2 1/2” x 2 1/2” b

1 27/64”

6”

4”

8”

6”

2 3/64”

SPECIFY THREAD

Bushing A104 a

To change 6” to 8” or 4” to 6” thread. FEMALE x MALE

Standard equipment: Brass bushing with female thread on one end and male on other end; NPT Threads.

6” x 4”

8” x 6”

2 25/64”

3 5/32”

Female Check Snoot A90C To connect fire hose on multiple inlet Fire Dept. connections. Checks excess backflow of water.

CERTIFICATIONS

FEMALE (SWIVEL) x FEMALE a

LISTED 166Y

Standard equipment: Cast brass with female (swivel) hose inlet x female NPT outlet and checking device. Swivel furnished with pin or rocker lugs.

Optional Finishes: PB PC

1/2”

3”

2 1/2” x 3”

B A

6 57/64”

4 11/64”

2 21/64”

SPECIFY THREAD

Male Check Snoot A91C To connect fire hose on multiple inlet Fire Dept. connections. Checks excess backflow of water.

CERTIFICATIONS

FEMALE (SWIVEL) x MALE a

LISTED 166Y

Standard equipment: Cast brass with female (swivel) hose inlet x female NPT outlet and checking device. Swivel furnished with pin or rocker lugs.

2 1/2”

3”

Optional Finishes: PB PC

2 1/2” x 3” A

7 3/32”

4 9/32”

2 21/64”

B A

SPECIFY THREAD

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Flush Fire Dept. Inlet Connections - Clapper Snoot Type A111

End Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply.

CERTIFICATIONS

Available with 3, 4, 6 outlets; NPT Threads. a

LISTED 10PM

6”

3”

8”

3”

B C

A D

A112

6” x 3” /4

6” x 3” /6

23/64”

44 23/64”

8 11/32”

7 21/64”

7”

6”

3”

8”

3”

Back Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply.

a b

6” x 3” /3

Available with 4, 6 outlets; NPT Threads.

B C

6” x 3” /4

6” x 3” /6

32 7/32”

46 7/32”

9 13/32”

7 21/64”

7”

7 31/64”

A113

Angle Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply.

Available with 4, 6 outlets; NPT Threads.

6”

3”

8”

3”

6” x 3/4”

6” x 3/6”

7/32”

46 7/32”

8 25/32”

7 21/64”

7”

31/64”

7 31/64”

8 13/16”

Flush Fire Dept. Inlet Connections - Clapper Snoot Type Four-way Square Body A114

Back Outlet Body

Used as an auxiliary inlet connection to supplement the fire protection water supply.

6”

3”

Available with NPT Threads.

8”

3”

6” x 3”

15 13/64”

8 55/64”

7 31/64”

7”

11 29/32”

November 2006

ISO 9001: 2000

0163EN

0006/5

IT-3995

FIRE PROTECTION PRODUCTS

A115

Angle Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply.

b Available with NPT Threads.

6”

3”

8”

3”

6” x 3” a D

15 5/16”

8 55/64”

7 31/64”

7”

11 29/32”

Flush Fire Dept. Inlet Connections - Clapper Body Type A121

End Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply. Drop clappers provide unobstructed waterway.

Supplied with HL configuration Available with 3, 4, 6 outlets; NPT Threads.

Standard version “Horizontal Left” A

B C

6”

3”

8”

3”

6” x 3” /3

6” x 3” /4

6” x 3” /6

23 23/64”

30 23/64”

44 23/64”

8 1/4”

7 21/64”

7”

A122

Back Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply. Drop clappers provide unobstructed waterway.

a b

Supplied with H configuration Available with 4, 6 outlets; NPT Threads.

6”

3”

8”

3”

6” x 3” /4 Standard version “Horizontal”

A A

B C

7/32”

6” x 3” /6

46 7/32”

9 5/16”

7 21/64”

7”

31/64”

7 31/64”

A123

Angle Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply. Drop clappers provide unobstructed waterway.

Supplied with HB configuration Available with 4, 6 outlets; NPT Threads.

6”

3”

8”

3”

6” x 3” /4

6” x 3” /6

32 7/32”

46 7/32”

8 11/16”

7 21/64”

7”

31/64”

7 31/64”

8 13/16”

Standard version “Horizontal Bottom” F

November 2006

ISO 9001: 2000

0163EN

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Flush Fire Dept. Inlet Connections - Clapper Body Type Four-way Square Body A124

Back Outlet Body

Used as an auxiliary inlet connection to supplement the fire protection water supply. Drop clappers provide unobstructed waterway. Available with NPT Threads.

6”

3”

8”

3”

6” x 3”

15 13/64”

9 1/4”

7 31/64”

7”

12 21/32”

6”

3”

8”

3”

A125 b

Angle Outlet Body Used as an auxiliary inlet connection to supplement the fire protection water supply. Drop clappers provide unobstructed waterway.

Supplied with B configuration; NPT Threads. b

Standard version “Bottom”

a D

6” x 3” A

15 25/64”

8 17/64”

7 31/64”

7”

12 21/32”

Single Inlet Connection A190T For residential sprinkler systems. Available with NST or NPSH thread.

CERTIFICATIONS

b A190: no plug and chain. LISTED 166Y

1/2”

1 1/2”

1 1/2” x 1 1/2”

4 11/32”

1 61/64”

29/32”

SPECIFY THREAD

Swing Check Valve A140 For sprinkler and standpipe systems.

CERTIFICATIONS

Available with the following threads: 4” NPT inlet x Groove outlet; 4” NPT Male inlet x NPT Female outlet; 4” Groove inlet and outlet.

APPROVED CE x 1260 LISTED 97X7

4” MALE x FEMALE is FM approved as “Anti-water Hammer check valve” b

Riser to Sprinkler Piping

4”

Groove Check Valve

4”

C A 4” Pipe

B From Underground

SPECIFY THREAD

5 23/64”

7 29/32”

3”

2 1/2” Hose

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Cap And Chain A80 To cover and protect male outlet threads on valves and hydrants. Prevents entry of foreign material.

1 1/2” A

15/64”

2 1/2”

35/64”

3”

23/32”

Standard equipment: Forged brass with chain. Available with pin or rocker lugs. a Optional Finishes: PB RC PC

SPECIFY THREAD

Plug And Chain A81 For Fire Dept. inlet connections. Prevents entry of foreign matter and protects female threads.

1 1/2”

2 1/2”

3”

1 35/64”

2 7/32”

2 3/8”

Standard equipment: Forged brass plug with male hose thread and attached chain. a

Available with pin or rocker lugs. Optional Finishes: PB RC PC

SPECIFY THREAD

Cap And Chain In Plastic (Abs) Red Color A80P To cover and protect male outlet threads on valves and hydrants. Prevents entry of foreign material.

1 1/2”

2 1/2”

1 15/64”

1 35/64”

2 1/2”

1 15/64”

1 35/64”

Standard equipment: ABS - with chain. Available with rocker lugs. a

SPECIFY THREAD

Cap And Chain In Plastic (Abs) Chrome Plated A80PC To cover and protect male outlet threads on valves and hydrants. Prevents entry of foreign material. Standard equipment: ABS - with chain. Available with rocker lugs. a

SPECIFY THREAD

Optional Finishes: PC

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Double Jacket Brass Coupling A70 Pin lug coupling for use with single or double jacket linen hose. Standard equipment: Forged brass finish, 1 1/2” or 2 1/2” sizes, with swivels washer. Coupling Jacket: S- Single D- Double L- Linen Optional Finishes: PB RC PC

Øi

SPECIFY SPECIFYTHREAD TYPE

Type

Lenght

Thread

Øi

Jacket

28,5

31,8

38,2

1 1/2” NST

1 15/16”

38,8

2 1/2” NST

2 11/16”

38,8

11/16”

38,8

11/16”

38,8

2 1/2” NYC

2 11/16”

38,8

2 1/2” NYFD

2 11/16”

38,8

13/16”

D2C

38,8

13/16”

D2D

38,8

2 1/2” NYFD

2 13/16”

38,8

2 1/2” NPSH

2 13/16”

38,8

27/32”

38,8

27/32”

38,8

2 1/2” NYC

2 27/32”

45,2

2 1/2” NST

3”

45,2

3”

19/64”

11/16”

1 1/2” NPSH

1 11/16

1 1/2” NST

1 3/4”

3/4”

13/16”

1 1/2” NPSH

1 13/16”

1 1/2” NST

1 3/4”

3/4”

7/8”

1/2”

2 2

1/2”

NST

NST NYC

1/2”

NST

NYFD

1/2”

NST

NPSH

1/2”

NST

NPSH

1/2”

NST

NPSH

1 1

NPSH

31,8

2” NST

31,8

2” NPSH

2 19/64”

38,2

2” NST

2 35/64”

35/64”

38,2

2” NPSH

A70 Rocker lug coupling for use with single or double jacket linen hose. Standard equipment: Forged brass finish, 1 1/2” or 2 1/2” sizes, with swivels washer. Coupling Jacket: S- Single D- Double L- Linen Optional Finishes: PB RC PC

Type A0

28,5

31,8

0 Q

SPECIFY SPECIFYTHREAD TYPE

31,8 31,8

38,2

38,2 38,2

38,2

38,2 38,8

38,8

V1 T2

38,8 38,8

Thread 1 1

1/2”

NST

NPSH

1 1/2” NST 1

1/2”

1 1

NPSH

1/2”

NST

NPSH

1 1/2” NST 1

1/2”

1 1

NPSH

1/2”

NST

2 2

NPSH

1/2”

NST

NPSH

2 1/2” NST 2

1/2”

NPSH

1/2”

NYC

1/2”

Jacket

1 11/16”

1 3/4”

3/4”

13/16”

1 13/16”

1 7/8”

1 1

15/16”

2”

1 3/4”

NPSH

1 1/2” NST 1/2”

Øi 11/16”

13/16”

2 27/32”

27/32”

38,8

CSA

2 3/4”

38,8

2 1/2” QST

2 3/4”

3/4”

E3 F3

38,8 38,8

1/2”

WCT

1/2”

BCT

38,8

NST

2 3/4”

38,8

2 1/2” NSST

2 3/4”

NST

3”

NPSH

3”

NYC

3”

N1 P1

31,8

00 L

28,5

U Øi

Lenght

38,8 45,2

2 2 2

1/2”

45,2

2”CSA

3”

45,2

2”QST

3”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Single Jacket Brass Coupling A70 Pin or rocker lug coupling for use with single or double jacket linen hose. Standard equipment: Forged brass finish, 1 1/2” or 2 1/2” sizes and swivel washer. Coupling Jacket: S- Single L- Linen Optional Finishes: PB RC PC

Øi

Type A

28,5

L N

28,5 28,5

28,5

Type

Lenght

28,5

Øi

Lenght

28,5

Thread 1

1/2”

Jacket

NST

CHT

1 11/16”

11/16”

1 1/2” NPSH 1/2”

Øi 11/16”

NYSH

1/2”

PCT

1/2”

NST

1 3/4”

1 1/2” NPSH

1 3/4”

Thread

Øi

Jacket

1 11/16”

1/2”

NST

1 1/2” NPSH 1

1/2”

NST

3/4”

SPECIFY SPECIFYTHREAD TYPE

Forestry Coupling A71 Standard equipment: Forged brass external long quick connect coupling for forestry fire hose.

1 1/2” A

2 49/64”

1 13/16”

1 9/32”

Adjustable Fog Nozzle A7A For Hose Rack.

CERTIFICATIONS

Standard equipment: Forged brass finished nozzle with adjustable fog, straight-stream and shut-off feature.

APPROVED CE x 1256 LISTED 647X

Optional Finishes: PB RC PC

1 1/2” A

3 13/16”

SPECIFY THREAD

Adjustable Fog Nozzle With Bumper To Protect Nozzle A7B For Industrial Application.

CERTIFICATIONS

Standard equipment: Forged brass finished nozzle with adjustable fog, straight-stream and shut-off feature.

APPROVED CE x 1260 LISTED 97X7

Optional Finishes: PB PC

SPECIFY THREAD

1 1/2”

2 1/2”

3 13/16”

5 9/16”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Adjustable Fog Nozzle With Bumper To Protect Nozzle A7B storz For Industrial Application storz connection Standard equipment: Forged brass finished nozzle with adjustable fog, straight-stream and shut-off feature.

1 1/2”

2 1/2”

5 19/32”

6 7/64”

SPECIFY THREAD

Plastic Adjustable Fog Nozzle With Bumper A7BP For Residential Application

CERTIFICATIONS

Standard equipment: Nozzle with adjustable fog, straight-stream and shut-off feature. APPROVED CE x 589 LISTED 647X

A 1 1/2”

4 37/64”

SPECIFY THREAD

Automatic Ball Drip A58 To drain low point of system between swing check valve and Fire Dept. connection. Automatically seals under pressure. Must be installed in vertical position only.

1/2”

3/4”

MALE x MALE

1/2” Standard equipment: Cast brass straight connection male NPT both.

11/16”

3/4”

2 11/16”

Line-tester A59 For installing the last sprinkler head on system branch lines, controls water flow for flushing or testing of the system.

CERTIFICATIONS

Available with NPT Threads.

APPROVED LISTED 166Y

b a

1”

1/2”

1” x 1” B E

D C

1 11/32”

2 3/16”

4”

1 1/2”

1 9/32”

November 2006

0163EN

ISO 9001: 2000

0006/5

IT-3995

FIRE PROTECTION PRODUCTS Brass Automatic Drain Valve A91AD Used to prevent water damage to hose due to valve leakage

Standard equipment: Cast brass female pin lug swivel hose thread drain vlave with ball seal, activated at 3 psi. a&b = NST Threads a B

1/2”

1 1/2”

1 1/2” A

4 53/64”

4 55/64”

2 61/64”

2 1/8”

D C

SPECIFY THREAD

Full Port Ball Valve R910 FEMALE x FEMALE

CERTIFICATIONS

Standard equipment: Female NPT inlet and outlet, forged brass body, chrome plated ball with teflon seats.

APPROVED LISTED 757X

b a

a/b

PORT

1/2”

19/32” 2 7/32”

1 7/16”

3 3/64”

2 5/64” 63/64”

3/4”

51/64” 2 15/32”

1 29/32”

3 3/4”

2 23/32”

1 7/32”

1”

63/64”

3”

2 1/16”

3 3/4”

3 1/32”

1 9/16”

1 1/4”

1 17/64”

3 13/32”

2 1/4”

3 3/4”

3 13/32”

1 55/64”

1 1/2”

1 37/64”

3 51/64”

2 49/64”

5 3/8”

4 15/64”

2 1/8”

2”

1 31/32”

4 23/64”

3 5/64”

5 3/8”

4 55/64”

2 5/8”

2 1/2”

6 1/64”

4 23/64”

7 11/32”

6 21/32”

3 15/64”

3”

6 13/16”

7 31/64”

7 11/32”

7 13/32”

3 25/32”

4”

8 17/32”

6 1/64”

10 7/64” 9 31/64”

4 31/32”

Test And Drain Valve A61 FEMALE x FEMALE

CERTIFICATIONS

Standard equipment: Female NPT inlet and outlet, forged brass body, brass finish ball with teflon seats.

APPROVED LISTED 36Y7

a c

a/b (Orifice)

PORT

PORT 1/16”

1/32”

43/64”

11/32”

27/64”

57/64”

1”(1/2”)

1/4”

1”(17/32”)

1/4”

1 1/16”

5 1/32”

2 43/64”

5 11/32”

4 27/64”

1 57/64”

1 1/4” (1/2”)

1/4”

1 1/16”

5 1/32”

2 43/64”

5 11/32”

4 27/64”

1 57/64”

1 1/4” (17/32”)

1/4”

1 1/16”

5 1/32”

2 43/64”

5 11/32”

4 27/64”

1 57/64”

c (plug)

November 2006

Quantity

0163EN

FIRE PROTECTION PRODUCTS Fig.

Size

Q.ty x Carton

1/2”

A51

1/2”

A53

2 1/2” X 2 1/2”

A7A A7B A7B A7P A50

A53 A53G A55 A55 A56 A56

20 20

1/2”

3” X 1 2

1/2”

Fig. A88 A88

Size 2

1/2”

X 3”

1/2”

A88G

4”

A89G

Q.ty x Carton

1/2”

1/2” 1/2”

1/2”

15 25

A90

2 1/2” X 3”

6 12 6 12 6

A91 A91 A91 A91 A91AD

1/2”

A90C

20 20

12 6

1/2”

X 2”

1/2”

X 3”

1/2”

X 3”

X 3” 1/2”

1/2”

10 10 10 50 10 10 10

1/2”

A58

1/2” X 1/2”

100

A91C

A58

3/4” X 3/4”

100

A92

1 1/2” X 1 1/2”

A59

1” X 1”

A92

2 1/2” X 2”

A61 A61

1”

1” X 1/4” 1 2

1/2”

A70

1/2”

A71

1 1/2”

A75

1/2”

X 3/4”

1/2”

100

A80

1/2”

A80

A65 A65 A70

1/2”

25 10 25

A92 A92 A93 A93

1/2”

X 3”

1/2”

X 2”

1/2” 1/2”

1/2”

20 20 50 20

1/2”

A94

1/2”

A94

2 1/2” X 2 1/2”

A93

4” X 2

1/2”

4” X 2

1/2”

4” X 2

1/2”

A97

6” X 2

1/2”

A97 Three-way

4” X 2 1/2”

3”

A97 Three-way

6” X 2 1/2”

A80P

1 1/2”

100

A98

4” X 2 1/2”

A80P

2 1/2”

A98

6” X 2 1/2”

A80PC

1 1/2”

100

A98 Three-way

4” X 2 1/2”

A80PC

2 1/2”

A98 Three-way

6” X 2 1/2”

A81

1 1/2”

A99

2 1/2” X 1 1/2”

A81

1/2”

A81

3”

A75 A75 A80

X 2”

A83

1/2”

X 3”

A85

2 1/2” X 2 1/2”

A86 A87 A87

50 50

1/2”

A83

1/2”

X 2”

1/2”

A95 A96 A97

1/2”

A101

4” X 2

A101

4” X 3”

10 4 1

1/2”

A101

6” X 2

A102

4” X 2 1/2”

A102

4” X 3”

A102

A103

A104

6” X 2

1/2”

5 6” X 4”

Fig.

Size

Q.ty x Carton 1/2”

A105

4” X 2

A105

4” X 3” 1/2”

A105

6” X 2

A105

6” X 3”

A105 Three-way 4” X 2

1/2”

A105 Three-way 6” X 2

1/2”

A106 A106

4” X 2 1/2” 4” X 3” 1/2”

A106

6” X 2

A106

6” X 3”

A106 Three-way 4” X 2

R910

1/2”

100

R910

3/4”

100

R910

1”

4”

A112

8” X 3”

A113

6” X 3”

A113

8” X 3”

A114

6” X 3”

A114

8” X 3”

A115

6” X 3”

A115

8” X 3”

A121

6” X 3”

A121

8” X 3”

A122

6” X 3”

A122

8” X 3”

A123

6” X 3”

A123

8” X 3”

A124

6” X 3”

A124

8” X 3”

A125

6” X 3”

A125

8” X 3”

A140

4” X 4”

2 1

1/2”

A170 A190T A201 A202

R910

A156

1/2”

6” X 3”

1/2”

2” 3”

A112

R910 R910

A156

R910

1/2”

8” X 3”

R910

6” X 3”

A155

A111

1/2”

1/4”

R910

Q.ty x Carton 1/2”

A111

A155

1/2”

A204

A106 Three-way 6” X 2 1/2”

1/2”

Size

1/2”

A107

Fig.

100

November 2006

0163EN

CD-ROM

FIRE PROTECTION PRODUCTS

VER. 1.2

PRESSURE REDUCING VALVES FOR FIRE PROTECTION SYSTEMS

PROGRAM FOR ANGLE AND STRAIGHT VALVES SETTING

This technical communication has an indicative value. Giacomini S.p.A. has the right to make in anytime, without previous advice, modifications to the products contained in the present communication for technical or commercial reasons. Information reported in this technical communication does not free the user from scrupulously following the existing technical instructions. A reproduction, also partial, of the text is forbidden, except for previously written authorisation from the Management.

NOVEMBER 2006 GIACOMINI TECHNICAL COMMUNICATION N° 0163EN

GIACOMINI SPA Via per Alzo,39 28017 San Maurizio d’Opaglio (NO) ITALY tel. + 39 0322 923111 - fax +39 0322 96256 e-mail: info@giacomini.com internet: www.giacomini.com

12/7/2014

5Elem Material Scientific: Professional fire hose manufacturer, reasonable price and high quality.

ä¸ć&#x2013;&#x2021; | English

PRODUCT Fire Hose Rack Hose Attack Hose Supply Hose Forestry Hose

Rack Hose - FBX Series

Your Place

Home

Catlog Request

Rack Hose - FBX Series

ABNT NBR 11861 Hose Marine Hose

Products Search

BS 6391 Hose DIN Fire Hose

Region

--Region--

Application

Approvals

--Application--

--Approval--

EN 14540 Hose Industrial Hose

Rack Hose - FBX Series

Other Hose

A single jacket 100% filament polyester hose intended for interior protection and occupant use in buildings and plants. Rack Hose-FBX is lined with thermoplastic polyurethane (TPU) .Lightweight and compact. FBX rack hose has a service test pressure rating of 150 Psig (1035kpa) and 250 Psig (1750 kpa) and is approximately half the weight of conventional rubber lined single jacket hose.

Couplings New Arrival

Contact Us Shanghai Office Add : Floor 1, Building 15, No.481 Guiping Rd., Caohejing Hi-Tech Park, Shanghai, China 200233

Pressure Requirement:

Tel :

+86-21-64907271/73

I.D. (Inch)

Service Test. Pressure(Psi)

Burst Pressure (Psi)

Fax :

+86-21-64901786

1-1/2"

150,250

450,750

1-3/4"

150,250

450,750

150,250

450,750

2-1/2"

150,250

450,750

Emall : cn@5elem.com Factory: Add : No. 986 Machang Rd., Economic Development Zone, Jiangyan district, Taizhou, Jiangsu province, 225510 Tel :

+86-523-88814565

I.D. (Inch)

Service Test. Pressure(Psi)

Burst Pressure (Psi)

Fax :

+86-523-88818855

1-1/2"

250

750

Certification

Certification /

Emall : cn@5elem.com

Construction: Filament polyester as warp and weft, thermoplastic

http://www.5elem.com/product/detail.aspx?id=14&mid=72341268037894144&bid=72339069014638592

1/2

12/7/2014

5Elem Material Scientific: Professional fire hose manufacturer, reasonable price and high quality.

ä¸ć&#x2013;&#x2021; | English

PRODUCT Fire Hose Rack Hose Attack Hose Supply Hose Forestry Hose

Rack Hose - FBS Series

Your Place

Home

Catlog Request

Rack Hose - FBS Series

ABNT NBR 11861 Hose Marine Hose

Products Search

BS 6391 Hose DIN Fire Hose

Region

Application

--Region--

Approvals

--Application--

--Approval--

EN 14540 Hose Industrial Hose

Rack Hose - FBS Series

Other Hose

This double jacket hose is constructed of high tensile strength polyester yarns, lined with a high-tech EPDM tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The jacket shall be evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist. Manufactured in accordance with National Fire Protection Association (NFPA) 1961

Couplings New Arrival

Contact Us Shanghai Office Add : Floor 1, Building 15, No.481 Guiping Rd., Caohejing Hi-Tech Park, Shanghai, China 200233

Pressure Requirement:

Tel :

+86-21-64907271/73

I.D. (Inch)

Service Test. Pressure(Psi)

Burst Pressure (Psi)

Fax :

+86-21-64901786

1-1/2"

150,250

450,750

1-3/4"

150,250

450,750

150,250

450,750

2-1/2"

150,250

450,750

Emall : cn@5elem.com Factory: Add : No. 986 Machang Rd., Economic Development Zone, Jiangyan district, Taizhou, Jiangsu province, 225510 Tel :

+86-523-88814565

Fax :

+86-523-88818855

Emall : cn@5elem.com

Certification

Construction: Polyester spun as warp and filament polyester.

Application: Building protection. Color:White, other color on request. http://www.5elem.com/product/detail.aspx?id=5&mid=72341268037894144&bid=72339069014638592

1/2

12/7/2014

5Elem Material Scientific: Professional fire hose manufacturer, reasonable price and high quality.

ä¸ć&#x2013;&#x2021; | English

PRODUCT Fire Hose Rack Hose Attack Hose Supply Hose Forestry Hose

Rack Hose - FAS Series

Your Place

Home

Catlog Request

Rack Hose - FAS Series

ABNT NBR 11861 Hose Marine Hose

Products Search

BS 6391 Hose DIN Fire Hose

Region

--Region--

Application

Approvals

--Application--

--Approval--

EN 14540 Hose Industrial Hose

Rack Hose - FAS Series

Other Hose

The Rack Hose-FAS is an all polyester single jacket interior protection hose with EPDM inner liner, for buildings and plants. Low friction loss for maximum flow. Strong, compact and practical, and will fit on most hose storage device. Our liner process produces an amazingly thin but smooth inner waterway, tough and ready for action but light in weight.

Couplings New Arrival

Contact Us Shanghai Office Add : Floor 1, Building 15, No.481 Guiping Rd., Caohejing Hi-Tech Park, Shanghai, China 200233

Pressure Requirement:

Tel :

+86-21-64907271/73

I.D. (Inch)

Service Test. Pressure(Psi)

Burst Pressure (Psi)

Fax :

+86-21-64901786

1-1/2"

150,250

450,750

1-3/4"

150,250

450,750

150,250

450,750

2-1/2"

150,250

450,750

Emall : cn@5elem.com Factory: Add : No. 986 Machang Rd., Economic Development Zone, Jiangyan district, Taizhou, Jiangsu province, 225510 Tel :

+86-523-88814565

I.D. (Inch)

Service Test. Pressure(Psi)

Burst Pressure (Psi)

Fax :

+86-523-88818855

1-1/2"

150,200

450,600

Certification

Certification /

Emall : cn@5elem.com

Construction: Municipal fire brigades, industrial fire brigades.Municipal fire brigades, industrial fire brigades.

http://www.5elem.com/product/detail.aspx?id=4&mid=72341268037894144&bid=72339069014638592

1/2

Accesorios

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55

Global Fire and Security Solutions, SAS

www.globalfire.com.co - info@globalfire.com.co

info@globalfire.com.co

PBX: (+571) 898.54.55