How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Golfs Hub

There are multiple ways you can clean your golf clubs. If you’re ready to spend money for the cleaning of your favorite golf clubs, there are shops for you, both online and of ine, where you can avail the necessary golf club cleaning products. The kits are good enough to ef ciently do the cleaning job for you. Or maybe the idea of spending money on golf cleaning kits sounds too silly to you, and you’re con dent to do it on your own. If you happen to believe you can, there are ways. By simply gathering up a few household items, it becomes a handy DIY process without costing you money. If you’re searching for an easy method of how to clean a golf club at home, you can follow our step-by-step guide that will explore you through the simplest of the golf club cleaning process. It’s essential for the process to be periodical, so it prevents the guck build-up, rusting, or possible damages, and therefore, upholds the effectiveness of your golf clubs. In this article, you’ll also get to know how to clean golf club heads, shafts, grips & rust. So, let’s get started!

How to Clean Golf Club Heads & Shafts Step-1: Gathering the Materials If you’re worried thinking about how much cleaning materials you’ll need, let me assure you, it’s not that much. Follow the list below to gather them all up.

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Plastic bucket (1 will do) Dishwashing detergent (should not be so harsh) Toothbrush, or some other brush with plastic bristles. A towel for the drying process. Trust me, that’s it! You can cut one bucket from the list if you’re willing to do it in your kitchen or bathroom sink. But we recommend using a bucket for the washing and another to store the already done ones especially if the iron heads have grimy dirt. You wouldn’t want to send the dirt through your inner plumbing. Step-2: Foaming it Up Pour some of the dishwashing detergents into the bucket, and add some warm water followed by. It’ll create suds. The water should be lukewarm rather than boiling. It’s because most of the irons come with plastic ferrules on the joint of the shaft and the clubhead. The glued ferrules can easily come off coming in contact with boiling hot water. You don’t need water more than the amount necessary to cover the iron heads.

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

This image is from wikihow.com Step-3: Placing the Irons into the Bucket Now place the bucket full of suds near a garden hose, or you can work inside a deep enough sink. A bathtub does the job as well. Set the bucket and place the irons into it. Submerge your clubheads in. Make sure the ferrules of the clubs are above the waterline.

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Rest the irons in the lukewarm water and soak them well. You donâ&#x20AC;&#x2122;t have to wait more than two minutes. This way, the dirt of the clubface loosens out form the grooves. The suds should begin working on the potential oil and chemicals that might have built up during a playing session.

This image is from wikihow.com

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Step-4: Cleaning Out the Grooves After youâ&#x20AC;&#x2122;ve waited a couple of minutes to soak them well, go for each club in turns, and using the old toothbrush/brush with plastic bristles, clean the grooves out on the clubface. This step holds the prime importance of the whole process. You must remove all the dirt and scraps from the groove. The caked-on scraps and dirt- lled grooves wonâ&#x20AC;&#x2122;t produce the intended performance. They cause losing grip on the golf ball, making it do fun stuff. Move on to dragging the brush across the iron sole and the backside of the clubhead followed by. Remove the grass, dirt, and other grimy stuff.

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Using a soft-bristled toothbrush, the process becomes much easier. Sometimes the dirt is allowed to build up without any cleaning only to harden over time. If this is your case, you might have to lengthen the soaking time and use a hard-bristled brush instead. We discourage using a wire-bristled brush when cleaning the clubs, for it may cause permanent scratches on the club surfaces.

This image is from wikihow.com Read: Best Golf Iron Sets

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Step-5: Rinsing off the Clubheads Now, using the garden hose (for outdoors) or the tap (for indoors) rinse off the clubheads. After youâ&#x20AC;&#x2122;ve washed away the suds, have another look if there are any remains of the dirt. Make sure youâ&#x20AC;&#x2122;ve removed them all from the grooves. And you must be extra careful to avoid splashing water up the shafts.

This image is from wikihow.com

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Step-6: Drying the Shafts and Clubheads Use an old towel for drying off the clubheads. Don’t forget to drag it up the shafts too. This way you can remove any remnants of loose scraps from the shafts ensuring they don’t go rest in your bag wet.

This image is from wikihow.com

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home

Read How to clean golf club Grips & Rust at Golfs Hub

Wrapping Up Golf clubs, regardless of the types, hardly require too much maintenance. Cleaning it with a cloth after every playing session is enough to keep up the good condition and retain its look. Nevertheless, you must clean it at least once a month if not too frequently. As you’ve learned now how to clean a golf club, you’ll know the dos and don’ts.

See also: How to x Golf Shank How to Putt in Golf Rules of Golf Etiquette Best Gift for golfers How to Hold a Golf Club Properly How to Stop Hooking the Golf Ball Sunglass Tint Color Guide How to make a proper golf stance This was originally published on golfshub.com

How to Clean Golf Club Grips, Shafts, Heads & Rust at Home: Bit by Bit Instruction

Turn static files into dynamic content formats.

Create a flipbook