TECHNICAL SKILLS & DETAILING ASSIGNMENT 2 - ROOM PLAN - WALL ELEVATIONS - WALL DETAILS ("J" MOLD & REVEAL) - CUSTOM FURNITURE DETAILS (SEE STUDIO A2 IMAGES ON PRIOR SLIDES FOR REFERENCE)
1 2" REVEAL (TYPICAL)
1 2" THICK PARTICLE BOARD P1 FINISH (TYPICAL)
REVEAL TO ALIGN W/ DOOR
P1 FINISH ON 21" PARTICLE BOARD PANELS
3 A1
6 A1
P1 FINISH ON PARTICLE BOARD RETURNS (TYPICAL)
2 A1
REVEAL TO ALIGN W/ WINDOW TRIM
A1 4
1 2" REVEAL GYPSUM WALLBOARD TO BE PAINTED GREY
RECESSED BASE PAINTED MDF WALL BASE (TYPICAL) WALL MOUNTED TELEVISION CUSTOM STORAGE UNIT
2 A1
WEST WALL ELEVATION SCALE:
1 4"
6 A1
= 1'-0"
REVEAL TO ALIGN WITH WINDOW TRIM
1 2
1 A1
SCALE:
= 1'-0"
NORTH WALL ELEVATION SCALE:
1 4"
= 1'-0"
PENDANT LIGHT
FIRST LAYER OF GYPSUM BOARD
1 2" THICK PARTICLE BOARD P1 FINISH (TYPICAL)
1 2" PARTICLE BOARD PANEL C/W "J" MOLD
BOTTOM OF LIGHT PENDANT AT CENTRE LINE (5'-0")
40" WALL MOUNT T.V (OFCI)
STORAGE TO BE 14" DEEP (TYPICAL)
"J" MOLD
1 4" PARTICLE BOARD PANEL ADHERE TO FIRST LAYER OF GYPSUM BOARD
GRAIN DIRECTION OF WOOD PROVIDE CONCEALED BRACKET FOR FLOATING STORAGE UNIT
RECESSED BASE PAINTED MDF WALL BASE (TYPICAL)
4 A1
EAST WALL ELEVATION SCALE:
1 4"
= 1'-0"
CUSTOM CABINET REVEALS TO ALIGN WITH WALL REVEALS
5 A1
GENERAL NOTES: 1. DRAWINGS PROVIDED BY HART CO. FOR DESIGN PURPOSES ONLY. 2. CONTRACTORS TO CONFIRM CRITICAL DIMENSIONS. 3. ALL ERRORS AND OMISSIONS TO BE REPORTED TO HART CO. VARIATIONS AND MODIFICATIONS TO WORK SHOWN ON THESE DRAWINGS SHALL NOT BE CARRIED OUT WITHOUT WRITTEN CONSENT FROM HART CO. 4. STRUCTURAL AND MECHANICAL ENGINEERS TO BE CONSULTED AS REQUIRED. 5. ALL DIMENSIONS FROM FINISHED FACE UNLESS OTHERWISE INDICATED. 6. ALL REVEALS TO BE 21" UNLESS OTHERWISE SPECIFIED.
CLIENT/PROJECT NAME:
WOOD COUNTER FLUSH W/ STORAGE, NO OVERHANG (TYPICAL) WD1
3" = 1'-0"
" REVEAL (TYPICAL)
RECESSED BASE PAINTED MDF WALL BASE (TYPICAL)
3 A1
SCALE:
1 2" THICK PARTICLE BOARD P1 FINISH (TYPICAL)
ROOM PLAN 1 4
WALL REVEAL DETAIL (TYPICAL)
ASSIGNMENT 2 U OF M DATE OF ISSUE: 10/11/2016
N SCALE: AS NOTED
SHEET NAME: ELEVATIONS & SECTIONS
DRAWER STORAGE WITH NO PULLS ALLOW FOR DRAWERS TO BE OPENED FROM UNDERSIDE OF MILLWORK
5 A1
"J" MOLD WALL DETAIL (TYPICAL) SCALE:
3" = 1'-0"
A1 HART CO.
EXISTING GROOVE IN RECLAIMED WOOD
EXISTING NOTCHES IN RECLAIMED WOOD
5 A2
DASHED LINE DENOTES EXTENT OF WOOD PIECES BELOW
SEAT
EXISTING RECESSED STRIP RUNNING THE FULL LENGTH OF THE RECLAIMED WOOD
CHAIR BACK
3" ROBERTSON DECK SCREW 1 A2
CUSTOM CHAIR PLAN SCALE:
1 " = 1'-0"
2 A2
CUSTOM CHAIR NORTH ELEVATION SCALE:
BUTT JOINT: 3" DECK SCREW, CONNECTION REINFORCED W/ WOOD GLUE
1 " = 1'-0"
5 A2
CUSTOM CHAIR SECTION SCALE:
1 " = 1'-0"
BUTT JOINT: WOOD GLUE USED FOR ADHESION
CLIENT/PROJECT NAME: GLUE JOINT REINFORCED W/ COUNTER SUNK 3" DECK SCREW
ASSIGNMENT 2 U OF M DATE OF ISSUE: 10/11/2016
SCALE: 1" = 1'-0"
SHEET NAME: CUSTOM CHAIR
3 A2
CUSTOM CHAIR SOUTH ELEVATION SCALE:
1 " = 1'-0"
4 A2
CUSTOM CHAIR WEST ELEVATION SCALE:
1 " = 1'-0"
A2 HART CO.
TECHNICAL SKILLS & DETAILING ASSIGNMENT 3 - ROOM PLAN - WALL TYPES - SECTION OF SUBFLOOR W/ FLOOR TRANSITION - COVE CEILING LIGHT DETAIL - OPENING DETAIL
WAITING
WAITING
1-02
1-02
3 21" SOUND BATT INSULATION
2 A1
RECEPTION
OFFICE 1-03
1-01
WOOD BLOCKING AS REQUIRED
3 A1
MEETING ROOM
CORRIDOR
1-10
1-11
1 2"
WINDOW SEALANT (TYPICAL)
OFFICE
CORRIDOR
RUBBER SPACERS
1-04
1-09
VERTICAL GLASS INSERT
GENERAL NOTES:
ALUMINUM CHANNEL SCREWED TO 2 X 4 WOOD SUPPORT
UNIVERSAL W/C 1-08
STAFF W/C 1-07
5 8"
DN CORRIDOR 1-12
DN
2 A1
FLOORPLAN SCALE:
1 8
GYPSUM BOARD
UTILITY ROOM 1-05
STAFF ROOM 1-06
1 A1
VERTICAL WINDOW SECTION DETAIL SCALE:
1 2
1- " = 1'-0"
" = 1'-0"
8" HOLLOW CORE SLAB INTERIOR PARTITION LEGEND:
1 2"
VERTICAL WINDOW ELEVATION SCALE:
1 2
" = 1'-0"
REPCOTILE WT2779 TERRAZO 12" X 12" TILE JOHNSONITE RUBBER REDUCER CD-XX-B 1 8" MARMOLEUM SHEET FLOORING IN #5225 "COMPRESSED TIME"
NEW INTERIIOR PARTITION ADJACENT TO EXTERIOR CINDER BLOCK WALL
(STC 48)
3 A1
ALL MEASUREMENTS FROM FINISHED FACE TO FINISHED FACE (TYPICAL). 2. CONTRACTOR TO VERIFY ALL CRITICAL DIMENSIONS 3. ALL TRADES TO VERIFY DIMENSIONS & DATA HEREIN WITH EXISTING CONDITIONS ONSITE. 4. GENERAL CONTRACTOR TO COORDINATE ALL SCHEDULING AND PHASING OF WORK WITH OWNER TO ENSURE MINIMAL DISRUPTION TO FACILITY OPERATIONS. 5. PATCH & REPAIR INTERIOR FACE OF PERIMETER SANDED SMOOTH FOR PAINT FINISH UNLESS OTHERWISE INDICATED. 6. ALL FURNITURE & EQUIPMENT TO BE SUPPLIED BY OWNER AND CONTRACTOR INSTALLED. 7. ALL NEW DUPLEX XAND DATA RECEPTACLES TO BE RECESSED AND MOUNTED AT CONVENTIONAL HEIGHT AS PER BUILDING CODE (UNLESS OTHERWISE NOTED) 8. RECONFIGURE AND BALANCE MECHANICAL SYSTEM OT SUIT NEW CONSTRUCTION. 9. CONFIRM POWER, DATA & SWITCH LOCATIONS WITH TENANT. 10. ELECTRICAL, MECHANICAL & STRUCTURAL ENGINEERS TO BE CONSULTED AS REQUIRED. 11. MARMOLEUM SHEET FLOOR FINISH UNLESS OTHERWISE INDICATED. 12. ALL FLOOR TRANSITIONS TO OCCUR AT CENTER OF DOORWAYS.
1 2" PLYWOOD SECURED WITH CONSTRUCTION GRADE ADHESIVE
NEW INTERIOR PARTITION TO U/S OF DECK 2 21" STEEL STUDS, 16" O.C. TO U/S OF DECK 1 LAYER 58 " DRYWALL BOTH SIDES
(STC 52)
1.
EXTEND EXISTING PARTITION TO U/S OF DECK 3 58" STEEL STUDS, 16" O.C. TO U/S OF DECK 1 LAYER 58" DRYWALL BOTH SIES 3 21" SOUND BATT INSULATION ALL JOINTS ACOUSTICALLY SEALED, TAPED ADN FINISHED NEW INTERIOR PARTITION 12" ABOVE FINISHED CEILING 3 58" STEEL STUDS, 16" O.C. TO U/S OF DECK 1 LAYER 58" DRYWALL BOTH SIDES 3 21" SOUND BATT INSULATION ALL JOINTS ACOUSTICALLY SEALED, TAPED AND FINISHED.
CLIENT/PROJECT NAME: N
U OF M ASSIGNMENT 3 DATE OF ISSUE: 10.29.16
SCALE: AS NOTED
SHEET NAME: CONSTRUCTION PLAN AND DETAILS
4 A1
NEW SUBFLOOR SECTION SCALE:
1 " = 1'-0"
A1 HART CO.
EXISTING ACT CEILING SYSTEM @ 10'-0" AFF
WAITING
WAITING
1-02
1-02 EXTERNAL WALL 8" CMU BLOCK
RECEPTION
OFFICE
1-01
1-03
2 A2
1 2" PLYWOOD FRAME ON 58" GB
PLYWOOD SUBSTRATE
MEETING ROOM 1-10
1 8" THICK HOT ROLLED STEEL FRAME TO HOUSE TELEVISION
CORRIDOR 1-11
3 A2
OFFICE
CORRIDOR
HOT ROLLED STEEL FRAME TO HOUSE TELEVISION
1-04
1-09
2 X 10 SOLID WOOD BLOCKING IN LOCATION OF TELEVISION MOUNTING BRACKET
STAFF W/C
UNIVERSAL W/C 1-08
1-07
TELEVISION MOUNTING BRACKET
UTILITY ROOM 1-05 STAFF ROOM 1-06
DN CORRIDOR 1-12
3 58" MIN 25 ga. STEEL STUDS @ 16" O.C C/W MINERAL FIBRE BATT INSULATION
DN
1 8" THICK HOT ROLLED STEEL FRAME TO HOUSE TELEVISION
1 A2
CEILING PLAN SCALE:
1 8
1 LAYER 58" GB ON 2 LAYERS 58" PLYWOOD SUBSTRATE
" = 1'-0"
2 21" MIN 25ga. STEEL STUDS @ 16" O.C. C/W MINERAL FIBRE BATT INSULATION
CLIENT/PROJECT NAME: 1" AIRSPACE 5 8"
LED LIGHT FIXTURE (OFCI)
GB
DATE OF ISSUE: 10.29.16
USGC COMPASSO CLIP WALL ASSEMBLY
5 8"
GYPSUM BOARD
USGC 8" COMPASSO
2 A2
COVE LIGHTING DETAIL SCALE:
1 " = 1'-0"
3 A2
PERIMETER WALL ASSEMBLY WITH TELEVISION INSTALLATION SCALE:
1 " = 1'-0"
N
U OF M ASSIGNMENT 3
SCALE: AS NOTED
SHEET NAME: CEILING PLAN & DETAILS
A2 HART CO.
TECHNICAL SKILLS & DETAILING ASSIGNMENT 4 - GLASS HARDWARE DETAILS - COLUMN DETAILS - SIGNAGE
BASE OF UPPER LEVEL'S FLOORSLAB STRUCTURAL STEEL COLUMN EXPOSED 4" BELOW CEILING PLANE
4"
8"
2" GYPSUM COVERING
212"
2"
41 2"
COLUMN AND GYPSUM CEILING UNCONNECTED: REVEAL BETWEEN STRUCTURAL STEEL AND CEILING
8"
COLUMN PLAN VIEW SCALE:
3 A2
1 " = 1'-0"
COLUMN TO CEILING TRANSITION SCALE:
1 " = 1'-0"
4"
1 A2
8'-2"
2" GYPSUM ADHERED TO STEEL PAINTED W/ BEHR PAINT
STRUCTURAL STEEL COLUMN
STRUCTURAL COLUMN EXPOSED 6" AT BASE FOR "FLOATING" EFFECT
1 1" " 22
6"
1 2"
12" x 12" GREY CERAMIC TILE
1 2" PLYWOOD SECURED WITH CONSTRUCTION GRADE ADHESIVE
8"
2 A2
COLUMN ELEVATION SCALE:
1 2
" = 1'-0"
CLIENT/PROJECT NAME: U OF M ASSIGNMENT 4
3 1" 4"
6"
1'-0"
STEEL STRUCTURAL COLUMN 8" X 8"
FOOTPLATE
4 A2
COLUMN TO FLOOR TRANSITION SCALE:
1 " = 1'-0"
DATE OF ISSUE: 11-25-16
SCALE: AS NOTED
SHEET NAME: COLUMN DETAILS
A2 HART CO.
ACOUSTIC SEALANT SOUND BLOCKING INSULATION STEEL DECKING
2"
FLOOR SLAB ABOVE
HANGER WIRE 4' O.C. OR AS REQ'D BY CODE
51 4"
12"
1'-1"
212" 31 2"
6"
5 8"
GYPSUM, BULKHEAD TO BE PAINTED THE SAME AS CEILING: METALLIC OYSTER #ML127 2 LAYERS OF 58" GYPSUM, OUTER FACE PAINTED W/ BEHR ABBEY STONE (#MQ2-56)
H-BAR ARMSTRONG WOODWORKS ACCESS PANEL, 10'-3" A.F.F 1112"
HOOK ATTACHED DURING INSTALLATION, SECURED W/ 58" PHILLIPS PAN HEAD SCREWS 6" O/C
STEEL BRACING AS REQ'D 6"
PLUG-IN CLIP
101 4"
HUSH 20 PERIMETER SEAL PLACED EVERY 1' AS PER MANUFACTURER'S SPEC
6"
13 4"
6"
HUSH SUSPENDED CEILING: 1 2" PLASTER SOUNDBOARD GYPROC, ON 34" PLASTERBOARD PLANK, 10'-8" A.F.F
1 " 2 1"
4"
HANGER FOR H-BAR
6MM GASKET ATTACHED DURING INSTALLATION
11 4"
3"
53 4"
6 1/2"
2"
MF CEILING SYSTEM CABLES SECURED TO STEEL BEAMS
CONSTRUCTION GRADE HOLLOW WALL ANCHOR (TO BE DETERMINED BY CONTRACTOR)
11 4"
GENERAL NOTES:
CEILING DETAIL
1.
1" = 1'-0"
2. 3. 4.
EXTERIOR WALL CMU BLOCK
8'-0"
1 21" AIRSPACE, INSULATION AS NEEDED
5. 11'-4"
53 4" 31 4" 1 4" 13 4" 1 4"
STEEL BRACE SECURED TO ALUMINUM ANGLE TO ATTACH TO STRUCTURE AS NEEDED
6.
7.
ALUMINUM WINDOW FRAMING SECURED TO STEEL BRACE (TYPICAL)
8.
ALL MEASUREMENTS FROM FINISHED FACE TO FINISHED FACE (TYPICAL). CONTRACTOR TO VERIFY ALL CRITICAL DIMENSIONS ALL TRADES TO VERIFY DIMENSIONS & DATA HEREIN WITH EXISTING CONDITIONS ONSITE. GENERAL CONTRACTOR TO COORDINATE ALL SCHEDULING AND PHASING OF WORK WITH OWNER TO ENSURE MINIMAL DISRUPTION TO FACILITY OPERATIONS. ALL FURNITURE & EQUIPMENT TO BE SUPPLIED BY OWNER AND CONTRACTOR INSTALLED. ALL NEW DUPLEX AND DATA RECEPTACLES TO BE RECESSED AND MOUNTED AT CONVENTIONAL HEIGHT AS PER BUILDING CODE (UNLESS OTHERWISE NOTED) ELECTRICAL, MECHANICAL & STRUCTURAL ENGINEERS TO BE CONSULTED AS REQUIRED. ALL FLOOR TRANSITIONS TO OCCUR AT CENTER OF DOORWAYS.
1" TEMPERED GLASS GYPSUM ALUMINUM EDGE FINISH
CLIENT/PROJECT NAME: 53 4"
INTERIOR WALL: 2 LAYERS 1 1 2" GYPSUM ON 2" PLYWOOD
1'-612"
SCALE:
1 " 4
1 A1
8"
EXTERIOR WINDOW SECTION SCALE:
1" = 1'-0"
DATE OF ISSUE: 11-25-16
SCALE: AS NOTED
112" 1"
101 2"
2 A1
U OF M ASSIGNMENT 4
SHEET NAME: CEILING AND WINDOW DETAILS
3 A1
EXTERIOR WINDOW ELEVATION SCALE:
1 2
" = 1'-0"
A1 HART CO.
PENDANT LIGHT: CUSTOM LOCAL LIBERIAN BLOWN GLASS 4 38" Ø
CEILING MOUNT LIGHT: CUSTOM LOCAL LIBERIAN BLOWN GLASS 6 38" Ø
10'-83 4"
8'-91 4"
3'-21 4"
1'-512"
3'-43 4"
℄
2'-21 4"
6"
1'-31 4"
CENTERLINE OF SIGNAGE
5"
TOP OF SIGNAGE
43 4"
1'-13 4"
PINMOUNT 41" THICK ALUMINUM LETTERS DISTANCED 1 21" FROM WALL
9'-01 4"
11'-4"
312"
1'-11 4"
10'-11"
℄
CENTER HEIGHT OF SIGNAGE 10'-0"
212"
113 4"
312"
103 4"
312"
103 4"
BOTTOM OF LIGHT FIXTURES
CUSTOM RECEPTION DESK
1'-51 4"
3'-212"
7"
SIGNAGE NOTES: 412"
5'-11"
DESK SIGNAGE ENGRAVED INTO STONE FACADE PRIOR TO INSTALLATION
113 4"
3. 4.
1 A3
RECEPTION DESK AND SIGNAGE ELEVATION SCALE:
1 2
" = 1'-0"
BOTTOM OF SIGNAGE
5.
FONT TO BE CALIBRI BOLD (TYPICAL). "GEEBAMU!" SIGN TO BE 10' X 1-5 21", COMPRISED OF 8 UNITS. SHOP DRAWINGS TO BE SUBMITTED W/ QUOTE FOR CLIENT REVIEW AND APPROVAL. 'M', 'U', AND '!' ALUMINUM LETTERING ARE BLOCKED BY DESK WHEN STANDING DIRECTLY IN FRONT. LETTERS ARE VISIBLE FROM ENTRANCE (ANGLED SOUTH-EAST OF DESK). "LIBRARY" SIGNAGE ENGRAVED INTO STONE FACADE OF DESK. SEE RECEPTION DESK DETAIL DRAWING FOR SPECIFICS.
11"
11"
11"
512"
312"
3'-1112"
1. 2.
CLIENT/PROJECT NAME: U OF M ASSIGNMENT 4 DATE OF ISSUE: 11-25-16
SCALE: 1/2" = 1'-0"
SHEET NAME: RECEPTION SIGNAGE
A3 HART CO.