Dampers SF by Heinen & Hopman

DAMPERS - SF Products

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

Dampers - SF - HEINEN & HOPMAN 2020 ©

Heating

Ventilation

Air Conditioning

Dampers - SF - HEINEN & HOPMAN 2020 ©

Refrigeration

COMPANY INTRODUCTION Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way. In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.

Europe 22 Offices

1200 Employees

Factories

Countries

Americas 11 Offices

Dampers - SF - HEINEN & HOPMAN 2020 ©

220 Employees

Countries

Factories

Asia 10 Offices

380 Employees

Factories

Countries

Dampers - SF - HEINEN & HOPMAN 2020 ©

DAMPERS Fire and smoke dampers Fire and smoke dampers prevent the spread of fire and smoke between fire zones, where people must have the maximum amount of time to react to possible fire. The dampers are type-approved according to A-0 (A-60).

SFDR AO (A60) fire dampers Frame: Steel. Thickness: 4 mm (2x2 mm with fiber silicate). Blades: Stainless steel. Sizes: 100x100 ~ 500x500 mm. Circular connection pieces: 100 ~ 500 mm SFDC AO (A60) fire dampers Frame: Steel. Thickness: 4 mm (2x2 mm with fiber silicate). Blades: Stainless steel. Sizes: Ø100 ~ Ø500. Circular connection pieces: 100 ~ 500 mm. (P)ROKL smoke dampers Frame: Galvanized steel. Thickness: 3 mm. Blades: Galvanized steel. Sizes: Ø100 ~ Ø250. Circular connection pieces: 100 ~ 250 mm. Control The dampers can be controlled electrically, pneumatically or manually. In case of fire, the fire dampers will close automatically. The electrically and pneumatically controlled dampers are driven by an actuator. Belimo actuator: standard actuator Schischek actuator: actuator used in explosion-proof areas or if the actuator must open/ close within 3 sec./90°. Certified quality In addition to ISO 9001, ISO 14001, quality and environmental management certificates, marine fire dampers conform to leading classification societies worldwide. Several dampers are ATEXcertified and shock-tested products for naval applications, ships and submarines.

Dampers - SF - HEINEN & HOPMAN 2020 ©

SFDR FIRE DAMPERS SFDR fire dampers are used in offshore, marine and navy ventilation systems. The dampers are type-approved according to A-0 (A-60). The dampers can be installed in rectangular ducts. The dampers have a fusible link and prevent the spread of fire and smoke within the ventilation ductwork. The dampers can be welded directly on the bulkhead (as penetration) or installed in the ducting system with the optional flange. The dampers with non-standard dimensions are available on request. The dampers begin to close when the air pressure is below 1.5 bar and closes below 0.5 bar. • • • • •

Type-approved by most recognized classification societies: class A0 and A60 (A60 insulation in all cases). The damper has an indicator which shows whether the damper is open or closed. Nominal fuse release temperature: 72 ºC. For MED certificate, use a damper of 900 mm, including coaming and A60 insulation. Automatic electrical, pneumatic or spring operation system available. Part

Material

Finishing

Frame

Steel S235JR

Shop Primer FS RAL 7012

Blades

Stainless steel AISI 1.4301

Bearings

Brass

Shafts

Stainless steel AISI 1.4404

Dimensions and material thickness The dampers meet international standards for rectangular (width W 100-500 mm and height H 100-500 mm, 1 mm division). Non-standard dimensions and flange drilling are available on request.

Classification for SFDR and SFDC • BV • RMRS

Dampers - SF - HEINEN & HOPMAN 2020 ©

• RRR

Dampers - SF - HEINEN & HOPMAN 2020 ©

SFDC FIRE DAMPERS SFDC fire dampers are used in offshore, marine and navy ventilation systems. The dampers are type-approved according to A-0 (A-60). The dampers can be installed in circular ducts. The dampers have a fusible link and prevent the spread of fire and smoke within the ventilation ductwork. The dampers can be welded directly on the bulkhead (as penetration) or installed in the ducting system with the optional flange. Non-standard dimensions are available on request. The dampers begin to close when the air pressure is below 1.5 bar and closes below 0.5 bar. • • • •

Type-approved by most recognized classification societies: class A0 and A60 (A60 insulation in all cases). The damper has an indicator which shows whether the damper is open or closed. Nominal fuse release temperature: 72 ºC. For MED certificate, use a damper of 900 mm, including coaming and A60 insulation • Automatic electrical, pneumatic or spring operation system available. Part

Material

Finishing

Frame

Steel S235JR

Shop Primer FS RAL 7012

Blades

Stainless steel AISI 1.4301

Bearings

Brass

Shafts

Stainless steel AISI 1.4404

Dimensions and material thickness The dampers meet international standards for circular duct (Ø100- Ø500 mm, 1 mm division). Non-standard dimensions and flange drilling are available on request. ØD non.

ØD ext.

ØC

100

108

210

350

145

125

133

240

350

145

160

168

265

350

145

200

208

320

350

145

225

233

320

350

145

250

258

375

350

145

300

308

440

500

250

355

363

490

500

250

400

408

540

500

250

500

508

645

500

250

Dimensions in mm

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure. Scan the QR-code or visit heinenhopman.com 4

Dampers - SF - HEINEN & HOPMAN 2020 ©

ROKL & PROKL SMOKE DAMPERS (P)ROKL smoke dampers are used in offshore, marine and navy ventilation systems. The dampers can be installed in circular ducts. The dampers prevent the spread of smoke within the ventilation ductwork. The dampers can be installed directly in insulated ducting systems. The dampers are used for non-insulated ducting systems. Non-standard dimensions are available on request. • Smoke damper for air intake and exhaust air with spring system. • Damper blades have thermal insulation. Part

Material

Note

Casing

Galvanized steel

Sendzimir process

Blades (sandwich design)

Galvanized steel

Sendzimir process

Blade insultation

Polyurethane

Blade gaskets

Silicon

Heat-proof model

Duct gasket

Rubber compound

Circular connections

Bearings

Brass

Shafts

Stainless steel

ROKL (non-insulated smoke damper)

Type

PROKL (insulated smoke damper)

Type

D1/D2

ROKL 100

200

PROKL 100

100/130

330

360

149

ROKL 125

122

200

PROKL 125

122/155

330

360

149

ROKL 160

157

200

PROKL 160

157/190

330

360

149

ROKL 200

197

200

PROKL 200

197/230

330

360

149

ROKL 250

247

355

172

PROKL 225

225/255

340

370

185

PROKL 250

250/280

340

370

185

Dimensions are mentioned in mm

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure. Scan the QR-code or visit heinenhopman.com 5

Austria T: +43 1720 1309 E: info@drewsmarine.com Brazil T: +55 213 587 4241/4244 E: info@br.heinenhopman.com Canada T:+1 450 659 6571 E: info@bronswerkgroup.com Denmark T: +45 5164 1614 E: admin@teknotherm.no France - La Ciotat T: +33 4 4204 8685 E: info@heinenhopmanfrance.com France - Antibes T: +33 4 8902 4562 E: info@heinenhopmanfrance.com Germany T:+49 4073 1680 E: info@drewsmarine.com Germany T:+49 471 9869 300 E: info@moehringms.com

India T: +91 336 499 1293 E: info@heinenhopmanindia.com Italy T: +39 187 187 8500 E: info@it.heinenhopman.com The Netherlands (HQ) T: +31 33 299 2500 E: info@heinenhopman.com The Netherlands - Rotterdam T: +31 18 020 9210 E: binnenvaart@heinenhopman.nl Norway T: +47 6919 0900 E: admin@teknotherm.no Peoples Republic of China T: +86 213 253 2896 E: info@cn.heinenhopman.com Peoples Republic of China T: +86 510 8528 1763 E: admin@teknotherm.no Poland T: +48 914 331 800 E: admin@teknotherm.no

Heinen & Hopman encourages a more sustainable world. By providing eco-friendly solutions and services we offer our clients the option of reducing energy consumption and thus CO2 emissions.

Romania T: +40 236 448 222 E: office@ro.heinenhopman.com Russia T: +7 812 449 3535 E: info@heinenhopman.ru Singapore T: +65 6897 7879 E: info@sg.heinenhopman.com South Korea T: +82 704 901 0000 E: info@kr.heinenhopman.com Spain T: +34 932 259 668 E: info@es.heinenhopman.com Sweden T: +46 3121 7500 E: admin@teknotherm.no Turkey T: +90 216 493 8118 E: info@tr.heinenhopman.com UAE - Abu Dhabi T:+971 2550 4147 E: info@caspuae.com

UAE - Dubai T: +971 4263 5453 E: info@caspuae.com USA - Seattle, Washington T: +1 206 632 7883 E: sales.uk@teknotherm.com USA - Fort Lauderdale, Florida T: +1 954 463 0110 E: info@arwmaritime.com USA - Houma, Louisiana T: +1 985 876 7982 E: leblanc@leblancandassociates.com

you require more information “ Do about our products or do you

“

require advice? I am keen to help you further!

Bas Veltman

Sales Manager sales@heinenhopman.com

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

www.heinenhopman.com 7

Heating

Ventilation

Air Conditioning

Refrigeration