Unit heaters by Heinen & Hopman

UNIT HEATER Products

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

Unit Heaters- HEINEN & HOPMAN 2020 ©

Heating

Ventilation

Air Conditioning

Unit Heaters - HEINEN & HOPMAN 2020 ©

Refrigeration

COMPANY INTRODUCTION Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way. In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.

Europe 22 Offices

1200 Employees

Factories

Countries

Americas 11 Offices

Unit Heaters- HEINEN & HOPMAN 2020 ©

220 Employees

Countries

Factories

Asia 10 Offices

380 Employees

Factories

Countries

Unit Heaters - HEINEN & HOPMAN 2020 ©

INTRODUCTION Unit heaters The unit heaters are primary used to heat large spaces outside the accommodation like workshops, engine room, etc. The heating is done by hot-air supply through a heating coil. There are different types of heating units: • Electrical heating unit: VLE heating units are mainly used in rough environments where boiler water is not available. The heating units are available from 3 kW to 36 kW. • Explosion-proof electrical heating unit: FE2 heating units are ATEX certified unit heaters, specially developed for Ex II and EX IIB zone. The heating units are available from 2.5 kW to 23.1 kW. • Hot-water heating unit: TGA heating units are the most common heating units used offshore and on board ships. The hot water from the boiler acts as heating medium. Steam can also be used as heating medium for higher efficiency. The heating units are available from 8.1 kW to 100 kW. • Thermal-oil heating unit: Thermal-oil heating units are functionally similar to hot-water heating units. The heating units are mainly used in areas with extremely low temperatures. Thermal oil acts as heating medium. Thermal oil has a low freezing point and a high temperature limit up to 400 °C. • Portable heating unit: Delta electrical heating units are easily movable and can be mounted to the wall with brackets for permanent installation. The heating units are available from 3 kW to 21 kW.

Unit Heaters- HEINEN & HOPMAN 2020 ©

Unit Heaters - HEINEN & HOPMAN 2020 ©

VLE UNIT HEATERS The VLE electrical fan heaters are designed for rough environments e.g. on ships, offshore, in workshops and large production areas. The heaters are available in three standard types: VLE-4, VLE-5 and VLE-6. The heaters are available in galvanized steel, but can also be supplied in different materials (on customer request). The heaters have a built-in thermostat (0-40 °C) which ensures optimal operation and minimizes the energy consumption. The heaters have a thermal fuse that turns off the heater at 110 °C. Heating element The heaters have an electric tube heating element made of stainless steel (AISI304). Standard version The heaters are supplied in 3 x 440V (AC) or 3 x 400V (AC), but very often applications require different voltages. All types are available from 230V to 3 x 690V, with output from 1.2 kW to 150 kW. Safety class IP44. Installation The heaters can be mounted on the wall or ceiling (horizontally or vertically). Capacity

VLE - 5

VLE - 4 Range

1.2 kW ~ 12.5 kW

Range

16.5 kW ~ 25 kW

Power

3ph / 440V / 60Hz 3ph / 400V / 50Hz (3 kW available in 230 V)

Power

3ph / 440V / 60Hz 3ph / 400V / 50Hz

Dimension

610 x 460 x 560 (mm)

Air quantity

1440 m /h

Sound level

75dB(A)

Dimension Air quantity Sound level

710 x 660 x 670 (mm) 2520 m3/h 75dB(A)

VLE - 6 Range

30.5 kW ~ 36 kW

Power

3ph / 440V / 60Hz 3ph / 400V / 50Hz

Dimension

910 x 660 x 760 (mm)

Air quantity

3960 m3/h

Sound level

75dB(A)

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure. Scan the QR-code or visit heinenhopman.com 3

Unit Heaters- HEINEN & HOPMAN 2020 ©

Unit Heaters - HEINEN & HOPMAN 2020 ©

FE2 UNIT HEATERS FE2 electrical fan heaters are CE-marked & ATEX-approved for use in hazardous areas. The heaters are designed for locations where specific explosive gases or dust may be present. The heaters use the Vacucore. The induced vacuum within the sealed core provides greater efficiency, distribution of heat across the face of the exchanger and a faster warm-up. If necessary, the entire core can be safely and easily replaced with a new exchanger or core. The heaters are ATEX Approved (directive 94/9/EC) and Ex II 2 G, Ex d IIB T3 Gb-certified. Heating element The heater core assembly has a sturdy, epoxy-coated, 14-gauge steel cabinet which carries the motor and fan assembly. Adjustable louvers allow directional control of the air flow. All fasteners are zinc-plated for corrosion protection. Standard version The heaters are supplied in 50 Hz or 60 Hz. All types are available from 1 x 220V to 3 x 440V. Installation The heaters can be mounted on the wall or ceiling (horizontally or vertically). Mounting kits are available on request. Mounting kits are made of steel with a wet-applied enamel paint. If the heater is installed on a structure that must be transported, provide additional support for the heater during transport. The suspended weight must not exceed 300 lbs (136 kg).

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure. Scan the QR-code or visit heinenhopman.com 4

Unit Heaters- HEINEN & HOPMAN 2020 ©

Unit Heaters - HEINEN & HOPMAN 2020 ©

SPECIFICATION FOR 50 HZ MODELS Voltage

Nominal wattage

Phase

FE2-220150-025 FE2-220150-042 FE2-220150-063 FE2-220150-084 FE2-220150-126

220 V 220 V 220 V 220 V 220 V

2.5 kW 4.2 kW 6.3 kW 8.4 kW 12.6 kW

1 1 1 1 1

FE2-230150-028 FE2-230150-046 FE2-230150-069 FE2-230150-138

230 V 230 V 230 V 230 V

2.8 kW 4.6 kW 6.9 kW 13.8 kW

1 1 1 1

FE2-240150-030 FE2-240150-050 FE2-240150-075 FE2-240150-100 FE2-240150-150

240 V 240 V 240 V 240 V 240 V

3.0 kW 5.0 kW 7.5 kW 10.0 kW 15.0 kW

1 1 1 1 1

FE2-380350-025 FE2-380350-042 FE2-380350-063 FE2-380350-084 FE2-380350-125 FE2-380350-167 FE2-380350-209

380 V 380 V 380 V 380 V 380 V 380 V 380 V

2.5 kW 4.2 kW 6.3 kW 8.4 kW 12.5 kW 16.7 kW 20.9 kW

3 3 3 3 3 3 3

FE2-400350-028 FE2-400350-046 FE2-400350-069 FE2-400350-093 FE2-400350-139 FE2-400350-185 FE2-400350-231

400 V 400 V 400 V 400 V 400 V 400 V 400 V

2.8 kW 4.6 kW 6.9 kW 9.3 kW 13.9 kW 18.5 kW 23.1 kW

3 3 3 3 3 3 3

FE2-415350-037 FE2-415350-075 FE2-415350-149 FE2-415350-224

415 V 415 V 415 V 415 V

3.7 kW 7.5 kW 14.9 kW 22.4 kW

3 3 3 3

FE2-440350-042 FE2-440350-084 FE2-440350-168 FE2-440350-210

440 V 440 V 440 V 440 V

4.2 kW 8.4 kW 16.8 kW 21.0 kW

3 3 3 3

Model

SPECIFICATION FOR 60 HZ MODELS Voltage

Nominal wattage

Phase

FE2-220160-025 FE2-220160-042 FE2-220160-063 FE2-220160-084 FE2-220160-126

220 V 220 V 220 V 220 V 220 V

2.5 kW 4.2 kW 6.3 kW 8.4 kW 12.6 kW

1 1 1 1 1

FE2-230160-028 FE2-230160-046 FE2-230160-069 FE2-230160-092 FE2-230160-138

230 V 230 V 230 V 230 V 230 V

2.8 kW 4.6 kW 6.9 kW 9.2 kW 13.8 kW

1 1 1 1 1

FE2-240160-030 FE2-240160-050 FE2-240160-075 FE2-240160-100 FE2-240160-150

240 V 240 V 240 V 240 V 240 V

3.0 kW 5.0 kW 7.5 kW 10.0 kW 15.0 kW

1 1 1 1 1

FE2-440360-042 FE2-440360-084 FE2-440360-168 FE2-440360-210

440 V 440 V 440 V 440 V

4.2 kW 8.4 kW 16.8 kW 21.0 kW

3 3 3 3

FE2-480360-030 FE2-440360-050 FE2-440360-075 FE2-440360-100 FE2-440360-150 FE2-440360-200

480 V 480 V 480 V 480 V 480 V 480 V

3.0 kW 5.0 kW 7.5 kW 10.0 kW 15.0 kW 20.0 kW

3 3 3 3 3 3

Model

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure. Scan the QR-code or visit heinenhopman.com 5

Unit Heaters- HEINEN & HOPMAN 2020 ©

Unit Heaters - HEINEN & HOPMAN 2020 ©

HOT-WATER UNIT HEATERS Hot-water unit heaters are primarily designed for heating of large rooms, workshops or production areas. The TGA 2000 heaters are designed for onshore and offshore objects. The heaters are manufactured in different sizes, with a heating capacity from 8.1 kW to 100 kW and an air flow from 1430 m³/h to 9370 m³/h. Heating element The heaters use the boiler water as heating medium. The air will flow through the heating coil by using a axial or centrifugal fan. The heaters are available with copper tube and aluminum fins, but can also be supplied with stainless-steel casing and galvanized-steel heat exchanger (suitable for rough environments e.g. on ships, offshore). Steam can also be used as heating medium for higher efficiency. The TGA 3000 heaters have a robust steel hot-dip galvanized heating coil, designed for steam heating. For extremely low temperatures where water/glycol is not applicable, thermal oil can act as heating medium. The TGA 1000 heaters have a robust steel hot-dip galvanized heat exchanger, designed for use with hot water, overheated water or thermal oil. More information on steam and thermal oil heaters on request. Standard version The heaters have 2-speed motor ventilators. The motors have an externally rotating rotor. • Protection class: IP54 • Insulation class: F On request, special motors, e.g. 3-speed motors, EEx(e) or EEx(d) motors can be mounted. The heaters are available in 1 x 230V, 3 x 230V or 3 x 400V (2-speed or 3-speed). Installation The TGA can be mounted on the wall or ceiling (horizontally or vertically). Options • Double-sided air grid • Four-sided air grid • Drain (when used for cooling) • 2-speed switch • 5-step switch • Ceiling mounting kit • Wall mounting kit TGA type

Capacity kW (15°C, 70-90°C)

Air quantity m3/h

A mm

B mm

C mm

2300

8,1 - 18,2

1160-1430

450

355

450

2400

11,8 - 27,4

1860-2290

500

395

500

2500

19,1 - 45,5

3250-3850

600

425

600

2600

28,2 - 65,1

4460-5690

700

425

700

2700

41,9 - 100

7450-9370

800

425

800

Austria T: +43 1720 1309 E: info@drewsmarine.com Brazil T: +55 213 587 4241/4244 E: info@br.heinenhopman.com Canada T:+1 450 659 6571 E: info@bronswerkgroup.com Denmark T: +45 5164 1614 E: admin@teknotherm.no France - La Ciotat T: +33 4 4204 8685 E: info@heinenhopmanfrance.com France - Antibes T: +33 4 8902 4562 E: info@heinenhopmanfrance.com Germany T:+49 4073 1680 E: info@drewsmarine.com Germany T:+49 471 9869 300 E: info@moehringms.com

India T: +91 336 499 1293 E: info@heinenhopmanindia.com Italy T: +39 187 187 8500 E: info@it.heinenhopman.com The Netherlands (HQ) T: +31 33 299 2500 E: info@heinenhopman.com The Netherlands - Rotterdam T: +31 18 020 9210 E: binnenvaart@heinenhopman.nl Norway T: +47 6919 0900 E: admin@teknotherm.no Peoples Republic of China T: +86 213 253 2896 E: info@cn.heinenhopman.com Peoples Republic of China T: +86 510 8528 1763 E: admin@teknotherm.no Poland T: +48 914 331 800 E: admin@teknotherm.no

Heinen & Hopman encourages a more sustainable world. By providing eco-friendly solutions and services we offer our clients the option of reducing energy consumption and thus CO2 emissions.

Romania T: +40 236 448 222 E: office@ro.heinenhopman.com Russia T: +7 812 449 3535 E: info@heinenhopman.ru Singapore T: +65 6897 7879 E: info@sg.heinenhopman.com South Korea T: +82 704 901 0000 E: info@kr.heinenhopman.com Spain T: +34 932 259 668 E: info@es.heinenhopman.com Sweden T: +46 3121 7500 E: admin@teknotherm.no Turkey T: +90 216 493 8118 E: info@tr.heinenhopman.com UAE - Abu Dhabi T:+971 2550 4147 E: info@caspuae.com

UAE - Dubai T: +971 4263 5453 E: info@caspuae.com USA - Seattle, Washington T: +1 206 632 7883 E: sales.uk@teknotherm.com USA - Fort Lauderdale, Florida T: +1 954 463 0110 E: info@arwmaritime.com USA - Houma, Louisiana T: +1 985 876 7982 E: leblanc@leblancandassociates.com

you require more information “ Do about our products or do you

“

require advice? I am keen to help you further!

Eric Stoffelsen

Sales Manager sales@heinenhopman.com

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

www.heinenhopman.com 7

Heating

Ventilation

Air Conditioning

Refrigeration