Lab Solutions

NOW AVAILABLE

Laboratory

FROM HENRY SCHEIN HALAS

Solutions

View our Promotions on the Henry Schein Halas App

www.henryschein.com.au

June - August 2018

RENFERT

Renfert now available SILENT COMPACT SUCTION UNIT

• •

Single workbench extraction

•

Noise level reduced due to a fully enclosed collector motor, with a run time of > 1 000 operating hours.

Compact, dustbag-free suction with automatic filter cleaning and durable collector motor

RN-2934000009

Was $1604.54 Now $1443.60

BASIC ECO SANDBLASTER Fine sandblasting unit with 1–2 tanks The Basic eco microblaster with up to two tanks offers high precision in a minimum space thanks to its compact dimensions. Top blasting technology and an attractive price-performance ratio combine perfect view to provide an ideal product for first-time users and laboratories where space is at a premium.

• • •

Ba

Fin

Maximum field of vision thanks to a large viewing panel with innovative LED lighting. tool Process reliability based on many years ofincluded experience in dental sandblasting technology.

Savings in abrasives by using optimal airabrasive mixture

RN-2949202509

The offe to it and to p and

compact

Was $1044 Now $940 Technical data Permissible mains voltage / frequency Working pressure Max. connection pressure Air consumption Intensity of lighting Lamp power

2

Dimensions (W x H x D) Orders: 1300 65 88 11 Tank capacity

220–240 V, 50/60 Hz | 120 V, 50/60 Hz 1–6 bar (14.5–87 psi) 6 bar (87 psi) 98 l/min at 6 bar (3.46 cfm at 87 psi)

“ se

4800 Lux 9W 350 x 275 x 400 mm (13.8 x 10.8 x 15.7") 1000 ml (34 fl. oz.)

C P

RENFERT

... from Henry Schein Halas!

TWISTER VACUUM MIXING UNIT 64

EQUIPMENT / MIXING TECHNOLOGY

High speed vacuum mixing unit with diaphragm pump for the vacuum and a base mixing function.

•

Twister Twister venturi

Reliable processing of large amounts due to high speed mixing.

• Easy and fast programming and operation using mixing units a large,Vacuum highly luminous display.

• The vacuum, which can be regulated from 70% to 100%, prevents bubbles Twister and Twister venturi are compact mixers RN-182600009 with easy-to-use standard functions and powerful

motor technology.

easy use

silent

Was $1735 Now $1561 VIBRAX

• • •

“The Twister venturi utilizes the existing compressed air supply of the laboratory and therefore makes a easy use vacuum pump unnecessary. Another advantage is that the unit is virtually maintenance-free and cost-effecBubble-free flow behaviour using two wave tive.”

ranges with 4 levels of intensity.

Low transfer of the vibrations to the workbench Sabine König, Product Management tool as the housing is oscillation decoupled. included Long service life using maintenance-free vibration magnet

Permissible mains voltage / frequency

100–240 V, 50/60 Hz

Power consumption

180 VA

Vacuum pump capacity Max. vacuum / Bowl pressure abs.

Rotational speed

100–450 1/min

Vacuum reduction Dimensions (W x H x D) wall unit Dimensions (W x H x D) with stand

Optimized vacuum mixing technology produces homosilent

geneous mixing results.

Was $723.33 Now $650

70–100 % 152 x 285 x 235 mm (6.0 x 11.2 x 9.3") 5,2 kg (11.5 lbs)

Tecnical data – Twister venturi 100–240 V, 50/60 Hz

Power consumption

180 VA

Connection pressure

5–6,5 bar (72.5–94.3 psi)

Max. vacuum / Bowl pressure abs.

Vacuum reduction

Automatic bowl coupling enables convenient sin-

Rotational speed

MT PLUS WET Features & DRY MODEL TRIMMER The units generally all have the same functions. The only

The proc ticat und

230 x 640 x 295 mm (9.0 x 25.2 x 11.6")

Weight (without bowl)

Virtually maintenance-free components.

gle-hand operation.

Vib

16 l/min (0.56 cfm) ≈ -890 mbar / ≈ 80 mbar (-12.9 psi / 1.16 psi)

Permissible mains voltage / frequency

Advantages RN-18300000

Vi

Tecnical data – Twister

≈ -890 mbar / ≈ 80 mbar (-12.9 psi / 1.16 psi) 80 % / 100 %

Air consumption, approx Dimensions (W x H x D) wall unit Dimensions (W x H x D) with stand

46 l/min (1.62 cfm) 100–450 1/min 152 x 320x 235 mm (6.0 x 12.6 x 9.3") 230 x 640 x 295 mm (9.0 x 25.2 x 11.6")

Weight (without bowl)

4,0 kg (8.8 lbs)

data difference is in the technology for generating the Technical vacuOrdering information um.

While the Twister operates using a motor pump, the The MT plus is a wet and dry trimmer. Pure power, 230 V, 50 Hz | 220 V, 60 Hz | 120 V, 60 Hz frequency Twister,/220–240 V, incl. 500 ml bowl and mixing paddle 100 V, 50 Hz | 100 No. V, 1826 Twister venturi produces the vacuum with the aidPermissible of com- mains voltage 600000 Hz even the hardest stone is easily removed thanks Twister, 100–120 V, incl. 500 ml bowl and mixing paddle No. 1826 1000 pressed air.

185 VA (230 V), 170 VA (120 V, 220 V) Power consumptionTwister venturi, 220–240 V, incl. 500 ml bowl and mixing paddle to the powerful motor performance.

No. 1827 0000 190 VA (100 V)

•

•

•

Twister venturi, 100–120 V, incl. 500 ml bowl and mixing paddle

No. 1827 1000

2 x T1,6 A

The front door can be easily removed without the use Frequency at 230 V 100 Hz of tools to allow easy, quick maintenance. Dimensions (W x H x D) 275 x 140 x 220 mm (10.8 x 5.5 x 8.7") Suitable accessories Detachable trimmer table and spray tube enable Weight very 6,4 kg (14.1 lbs) Mixing bowls and other accessories  Page 66 easy cleaning.

Noise-reducing, scratch-resistant housing made from Further information a special material (polyurethane) Ordering information

RN-18036500

Mains input fuse

www.renfert.com/P787 Vibrax, 230 V, 50 Hz

No. 1830 0000

Vibrax, 120 V, 60 Hz

No. 1830 1000

Vibrax, 220 V, 60 Hz

No. 1830 4000

A

Vibrax, 100 V, 50 Hz

No. 1830 2000

Vibrax, 100 V, 60 Hz

No. 1830 3000

Vibrating ball

No. 1830 0001

Was $2890 Now $2682

www.henryschein.com.au For further information,

3

CAD-CAM DISCS

KATANA™Zirconia Zirconia UTML UTML A3 A3

24 24 Monolithic Monolithic Zirconia Zirconia Crown Crown on on Implant Implant CASE STUDY BY RDT. IL KI RICKY LEE CASE STUDY BY RDT. IL KI RICKY LEE CLINICAL CASE COURTESY OF DR. ALAN YAP CLINICAL CASE COURTESY OF DR. ALAN YAP

1. SHAPING & SURFACE TOUCHING 1. SHAPING & SURFACE TOUCHING

After receiving the milled KATANA™ Zirconia crown adjust After receiving the milled KATANA™ Zirconia crown adjust surface and contact prior to first glazing. After adjustment, surface and contact prior to first glazing. After adjustment, remove white particles with aluminium oxide sandblast remove white particles with aluminium oxide sandblast (less than 2 bar/29 psi) and steam clean. (less than 2 bar/29 psi) and steam clean.

2. GLAZING - CERABIEN™ ZR FC PASTE STAIN 2. GLAZING - CERABIEN™ ZR FC PASTE STAIN

Evenly apply CERABIEN™ ZR FC Paste Stain “Fluoro” to the Evenly apply CERABIEN™ ZR FC Paste Stain “Fluoro” to the entire crown surface. This assists with the smooth application of entire crown surface. This assists with the smooth application of staining at the next stage and adds fluorescence to the zirconia staining at the next stage and adds fluorescence to the zirconia crown. Another application of this shade and a second fire may crown. Another application of this shade and a second fire may be necessary. be necessary.

3. BASE STAINING - CERABIEN™™ZR FC PASTE STAIN 3. BASE STAINING - CERABIEN ZR FC PASTE STAIN

Application of the base shade stain depends on target shade.

Application of the base shade stain depends on target shade.

Even application of stain will ensure shades blend from cervical Even application of stain will ensure shades blend from cervical to incisal. The following CERABIEN™ ZR FC Paste Stain to incisal. The following CERABIEN™ ZR FC Paste Stain shades were used at this stage. shades were used at this stage.

4. DETAILED STAINING - CERABIEN™™ ZR FC 4. DETAILED STAINING - CERABIEN ZR FC PASTE STAIN PASTE STAIN

For detailed staining, mix CERABIEN™ ZR FC Paste Stain For detailed staining, mix CERABIEN™ ZR FC Paste Stain “Fluoro” with other shades in the FC Paste Stain range to add “Fluoro” with other shades in the FC Paste Stain range to add texture, fluorescence and lustre. At this stage, you can adjust texture, fluorescence and lustre. At this stage, you can adjust the viscosity of CERABIEN™ ZR FC Paste Stain to make it the viscosity of CERABIEN™ ZR FC Paste Stain to make it thicker and give texture with a brush. thicker and give texture with a brush.

5. SHADE CHECKING & ANALYSIS 5. SHADE CHECKING & ANALYSIS

Following detailed staining, check the shade of the final crown Following detailed staining, check the shade of the final crown with pink wax around the cervical areas to compare the with pink wax around the cervical areas to compare the reflection level of pink with the reference photos. reflection level of pink with the reference photos.

FINALISE THE CROWN FINALISE THE CROWN

To further enhance the lustre, pumice the final restoration.

To further enhance the lustre, pumice the final restoration.

Using Kuraray Noritake PEARL SURFACE Dental Polish you Using Kuraray Noritake PEARL SURFACE Dental Polish you can achieve a lustre that blends with the natural aesthetics of can achieve a lustre that blends with the natural aesthetics of each case. each case.

• A+ (base target shade) – cervical • A+ (base target shade) – cervical • Grayish Blue (translucent incisal – mesiodistal) • Grayish Blue (translucent incisal – mesiodistal) • Light Gray (translucent incisal – middle incisal) • Light Gray (translucent incisal – middle incisal) • Value (crack lines and halo) • Value (crack lines and halo)

Phone: 1300

65 88 22 Fax: 1300 65 88 10

_RL_CaseStudy_Morita_v3.indd 1 _RL_CaseStudy_Morita_v3.indd 1

4

Orders: 1300 65 88 11

6/3/18 10:06 39 6/3/18 10:06 39

CAD-CAM DISCS

™ KATANA CERABIENZirconia ZR UTML A3 Stain FC Paste

1

2

3

4

5

24 Monolithic Zirconia Crown on Implant CASE STUDY BY RDT. IL KI RICKY LEE CLINICAL CASE COURTESY OF DR. ALAN YAP

1. SHAPING & SURFACE TOUCHING After receiving the milled KATANA™ Zirconia crown adjust surface and contact prior to first glazing. After adjustment, remove white particles with aluminium oxide sandblast (less than 2 bar/29 psi) and steam clean.

2. GLAZING - CERABIEN™ ZR FC PASTE STAIN Evenly apply CERABIEN™ ZR FC Paste Stain “Fluoro” to the Final Result entire crown surface. This assists with the smooth application of staining at the next stage and adds fluorescence to the zirconia crown. Another application of this shade and a second fire may be necessary.

4. DETAILED STAINING - CERABIEN™ ZR FC PASTE STAIN For detailed staining, mix CERABIEN™ ZR FC Paste Stain “Fluoro” with other shades in the FC Paste Stain range to add texture, fluorescence and lustre. At this stage, you can adjust the viscosity of CERABIEN™ ZR FC Paste Stain to make it thicker and give texture with a brush.

5. SHADE CHECKING & ANALYSIS Following detailed staining, check the shade of the final crown with pink wax around the cervical areas to compare the reflection level of pink with the reference photos.

3. BASE STAINING - CERABIEN™ ZR FC PASTE STAIN

FINALISE THE CROWN

Application of the base shade stain depends on target shade.

Even application of stain will ensure shades blend from cervical to incisal. The following CERABIEN™ ZR FC Paste Stain shades were used at this stage.

To further enhance the lustre, pumice the final restoration.

Using Kuraray Noritake PEARL SURFACE Dental Polish you can achieve a lustre that blends with the natural aesthetics of each case.

• A+ (base target shade) – cervical • Grayish Blue (translucent incisal – mesiodistal) • Light Gray (translucent incisal – middle incisal) • Value (crack lines and halo) Final Result

Phone: 1300

Clinical photography courtesy of Dr. Alan Yap

65 88 22 Fax: 1300 65 88 10

6 pm 97_RL_CaseStudy_Morita_v3.indd 1 6 pm 97_RL_CaseStudy_Morita_v3.indd 2

www.henryschein.com.au

5

6/3/18 10: 6/3/18 10

CAD-CAM DISCS

Zirlux 16

The most comprehensive Zirconia portfolio available.

®

Percentage of visible light transmittance

NEW

50 40 30 20 10 0

Zirlux® 16+ 5mm Thick Sample

Pre-shaded

and white

for producing all 16 VITA* shades

>44%† +

+

Translucency

3mm Thick Sample

Leading Competitors 1mm Thick Sample

1,200 MPa Flexural Strength

$99 12mm $124 14mm $149 16mm $175 Zirlux has allowed Drake to achieve the aesthetic result that 18mm $179 we want in our laboratory. Zirlux has the strengths and the

10mm

I am type

“

.

®

®

aesthetics that Drake needs.

Bob Savage

”

Drake Precision Dental Laboratory

Highlights

*VITA is a registered trademark of Vita Zahnfabrik. †Translucency at 1mm thickness.

• At 1mm thickness, Zirlux® 16+ is over 44% translucent† • 1,200 Flexural strength (MPa)

1-800-496-9500 www.zahndental.com • Produced in a range of sizes and thicknesses to fit leading milling machines

Indications • Copings • Multi-Unit Bridges • Full-Contour Crowns • Implant Abutments • Full Arch/Hybrid Bridges

6

• Available in pre-shaded discs to produce all 16 VITA* classical shades and 3 bleach shades (0M1, 0M2, 0M3) • Combine white discs with the Zirlux® coloring liquids to achieve all 16 VITA* classical shades • Enhance with 7 unique modifier liquids to achieve superior aesthetics - Pink, purple, pink-purple, orange, brown, light grey, grey

Orders: 1300 65 88 11

CAD-CAM DISCS

NE

W

14mm 18mm 22mm

$310.93 $401.87 $470.80

Aesthetics simplified.

Just glaze and go.

First inherently and high aesthetics. Now one disc has it all.

Productivity fluorescent zirconia 3M™ Lava™ Esthetic Fluorescent Full-Contour Zirconia is a new gradient pre-shaded cubic zirconia disc from 3M. It features a new four shading element formulation making Lava Esthetic zirconia the first pre-shaded zirconia offering inherent fluorescence for all shades as well as a true colour match with VITA® Classic shades.

Sintered 3M™ Lava™ Esthetic Zirconia crown tooth First zirconia withNatural inherent

A highly durable and aesthetic crown right out of the box is no toothlike fluorescence. longer a trade-off. The new pre-shaded cubic 3M™ Lava™ Esthetic Zirconia makes it a reality. thepre-shaded first zirconiazirconia with inherent Due to the new shading technology employed, Lava disc Esthetic zirconia is theIt'sfirst with and it provides built-in colour gradient too. The inherent toothlike fluorescence, allowing for fluorescence a lifelike appearance in anya light.

The inherent fluorescence A predictable streamlined process and beautiful also means that no special fluorescent glazeresult: is needed and theand fluorescence is lab maintained, even during full-contour restorations restoration adjustments where fluorescent glazes would be removed. truly matching the VITA® Classic shades.

Formatch. more information contact us on: True shade gradient for an excellent shade Australia 1300 726 115

Pre-shaded Lava Esthetic zirconia discs have an integral colour gradient to deliver natural-looking shading Newextra Zealand 0800 200 781 corrections after sintering. from enamel to dentine. There is no need to apply shading liquids or colour What you get are high translucency aesthetic full-contour restorations that truly match the VITA® Classic shades.

3M Australia Pty Limited 3M New Zealand Limited Always follow the Instructions for Use (IFU) and refer to IFU for full indications, precautions and warnings.

94 Apollo Drive Rosedale, Auckland 0632 3M.co.nz/dental

Claims supported by 3M data on file.

FLAME_3M4191 03/18

Building A, 1 Rivett Rd North Ryde, NSW 2113 3M.com.au/dental

“3M Science. Applied to Life.” and Lava are trademarks of 3M. All other trademarks are owned by other companies. © 3M 2018. All rights reserved.

Enhanced productivity with a streamlined mill-sinter-glaze process.

With Lava Esthetic zirconia discs, dental labs can experience a streamlined mill, sinter and glaze production process with consistent, predictable high-quality outcomes minus the guesswork. Using Lava Esthetic can save more than three hours (compared with liquid shaded zirconia materials) since there is no need for shading liquids or drying time.

Lava Esthetic gradient pre-shaded discs are now available in eight shades - Bleach, A1, A2, A3, A3.5, B1, C1 and D2. The material is available in 98mm disc with step format in 14mm, 18mm and 22mm heights.

Contact your Henry Schein Halas Laboratory Representative to hear about our launch specials

www.henryschein.com.au

7

VITA PROSTHETIC SOLU VITA PROSTHETIC SO VITA TEETH VITAPAN EXCELL

SPECIAL OFFER

MOULD CHARACTERISTICS

Buy 30 sets Get them at

Recommended ante

$27 each

Distinctive incisal characteristics for special vitality

Premium Prosthetic

Wide palatal bars for ideal interdental spacing / papilla creation

VITA PROSTHETIC SOLUTIONS VITA PROSTHETIC SOLUTIONS •

PAN EXCE TA

LL

Pronounced enamel portion/translucent edges for good light dynamics Nuance-rich surface texture for lifelike play of light

Integrated mamelon structure and whitish incisal region for natural shade effect

Full and partial dentures and implant-retained dentures

SPECIALUniversal OFFERProsthetic Buy 30 setsanterior Get them at ITAPAN co Recommended / posterior V

VITAPAN PLUS

®

MOULD CHARACTERISTICS

$27 each

Premium Prosthetic

Tooth geometry with youthful volume for lifelike prosthetics

V

®

SPECIAL FEATURES

• • •

PAN PLU ITA

AN A n teri or P

®

PAN EXCE TA

S

Wide palatal bars for ideal interdental spacing/papilla creation

VI

Distinctively natural incisal characteristics for high vitality

LL

• • •

For th A

A n teri or

RECOMMENDED INDICATIONS:

•

P ITA

®

• •

VI

SPECIAL FEATURES

V

Lifelike three-dimensional tooth geometry for brilliant results

VITA

• • •

High proportion of enamel/translucent edges for the best light transmission Nuance-rich surface texture for lifelike play of light

Po

A nteri or

A n teri or Integrated mamelon structure and whitish incisal region for natural shade effect

Basic Prosthetic

RECOMMENDED INDICATIONS:

•

For the best dental prosthetics – natural, reliable, rich in Vvariation.

ITA MFT ® Full and partial dentures with youthful esthetics and implant-retained dentures For the best dental prosthetics – natural, reliable, rich in vari

Universal Prosthetic APAN ® VIT

Recommended anterior / posterior combinations

A n teri or

Lifelike, distinctive incisal characteristics and natural labial curvature

Premium Prosthetic

terio

terio

Model casting, attachment and bar constructions

VITA

V

VI

Partial & telescopicAndentures An dentures r r

A

A MFT ® VIT

A MFT ® VIT

P o s t eri or

Skeletal frameworks, attachment and bar constructions

D /C A M ®

®

Elaborate surface texture for natural play of light

A

Basic Prosthetic

SI CA PHY ODE

NS

®

®

M OR

S

LL

Excellent chromaticity for good masking of tertiary structures

SIO PHY 18 DE

NS

® N LINGOF PA

VIT

E

TA

PAN PLU ITA

RECOMMENDED INDICATIONS:

• • •

Po s teri or

Broad tooth neck for ideal interdental space / papilla modeling

SPECIAL N EXC PAFEATURES

• •

Get them at $45 each

VIT

• •

Buy 30 sets of Anteriors

Natural three-dimensional tooth geometry for good integration in the remaining dentition

VITA

•

®

M OR

SPECIAL

MOULD CHARACTERISTICS

N CUSP PAAnt ior IF OFFER er VITA

PHYSIODENS

Posteri or

A nteri or

P

A nteri or SPECIAL OFFERosterior

Buy 30 sets of Posteriors

Universal Prosthetic

Get them at $36 each

VITA

Anterior

Orders: 13

VITA

CA M

T

Po s t eri or

VITA CA

Orders: 1300 65 88 11 Po s teri or

SYNOF ®

18

D/ CA

N PA

M

A n teri or

APAN ® V IT

OR

8

CUSP IF M OR

VITA

®

N PA

TH EE

APAN ® VIT

D/C

VITA TEETH Universal Prosthetic APAN ® VIT

MFT

Po s teri or A n teri or SPECIAL OFFER

MOULD CHARACTERISTICS Universal tooth geometry and tooth neck contour for a natural appearance Flat, naturally abraded incisal characteristics Universal tooth geometry with natural lingobuccal width Multifunctional occlusal surface design with defined centric contactBasic

A MFT ® VIT

A MFT ® VIT

A nteri or

Po s t e r i or

Pronounced enamel portion for good light transmission Nuance-rich surface texture for lifelike play of shade

RECOMMENDED INDICATIONS: Solid standard solutions for full/partial dentures

CA M

T

AM MAT D/C

Orders: 1300 65 8

I ER

TH EE

18

V-CLUB MEMBERSHIP PROGRAM

D/ CA

VITA CA

•

$10.50 each

Prosthetic

SPECIAL FEATURES

• •

Buy 30 sets Get them at

VITA

• • • •

CUSP IF M OR

VITA

®

N PA

Exclusive Loyalty Program for Teeth and Acrylics Become a member of V-Club today for instant discounts and save now!

Henry Schein Halas is pleased to announce our new V-Club Membership Program.

This program rewards you for your ongoing loyalty with Henry Schein Halas when you buy Vita Teeth and Vertex Acrylic.

Join V-Club Today!

Contact your Henry Schein Halas Prosthetic Solutions Representative.

Below is a table outlining the new pricing structure across Vita Teeth and Vertex Acrylic:

Vita Teeth Prices* Level Platinum Gold Silver Bronze

Vertex Acrylic Prices

Annual Expenditure

Discount Level

15000 10000 5000 2000

18% 15% 10% 5%

Level Platinum Gold Silver Bronze

Annual Expenditure

Discount Level

10000 7000 5000 2000

18% 15% 10% 5%

*Excludes MFT

9

www.henryschein.com.au Orders: 1300 65 88 11

9

PRESSABLE CERAMICS

Make GC Initial LiSi Press your 1st choice Don’t get left behind, add your name to the list of Laboratories using LiSi Press today Virtually no reaction layer when divested, making you more productive

SAVE 10% $179 Pack of 5 ingots

WHY CHOOSE INITIAL LISI PRESS? • • • •

10

No reaction layer when divested Faster process time No GREY! Amazing aesthetics – warmer richer colours High flexural strength than conventional Lithium Disilicates (535mpa)

Orders: 1300 65 88 11

SCHEU

MINISTAR S

Innovative Pressure Moulding Technique for your laboratory- quick, compact and precise.

Buy Scheu Ministar for $4500 Get $500 worth of Scheu Blanks FREE!

DURAN

Hard Elastic, transparent material with integrated insulation foil, bonds to acrylic.

No pre-drying.

SAVE

15%

Applications include: miniplast splints and occlusal splints

DURASOFT PD

Break and abrasion resistant transparent compound material- hard on one side and soft on the other. The hard side bonds to acrylic.

Already pre-dried and individually vacuumsealed material for instant use.

SAVE

15%

www.henryschein.com.au

11

VERTEX

RAPID SIMPLIFIED (RS) Quality Heat-Cured Denture Base Material Vertex™ Rapid Simplified (RS) is a heat-curing denture base material and forms a solid base for full and partial dentures. The pressing technique is the processing method for Rapid Simplified.

This cadmium-free acrylic has a rapid 20 minutes polymerisation cycle (also overnight polymerisation is possible). Flask to be put in boiling water.

Indications: •

Full dentures

•

Partial dentures

Now $85 Now $50 Now $30

Powder 1000g Tub Liquid

1L Bottle

Liquid

500ml Bottle

CASTAPRESS

Vertex™ Castapress is a self-polymerising pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of a unique accelerator system.

Now $93.65 Now $97 Now $66

Powder 1000g Tub Liquid

1L Bottle

Liquid

500ml Bottle

DIVOSEP

LC GLOSS

SAVE

25% •

Separating plaster from denture base material

•

Separating plaster from plaster

1000ml

Provides a high shining finish to acrylic areas that are hard to polish.

Benefits: easy application, quick cure.

Excellent bonding to hard acrylics.

$25

30ml

12

Orders: 1300 65 88 11

$78

3D PRINTING

3D Printing Formlabs High Precision 3D Printing for Your Dental Lab or Practice

NOW

$6100

The Form 2 is an affordable, high precision dental 3D printer for dental businesses of all sizes. An incredibly low footprint and cost-effective dental materials mean fast return on investment and the freedom to scale production as your business grows.

Automate Cleaning with Form Wash: Parts travel straight from the Form 2 to Form Wash. Opt to go glove-free and keep parts directly on the build platform.

Once washing completes, Form Wash automatically lifts parts out of the IPA, avoiding over-soaked, warped prints. Parts air dry and are ready when you are!

Unlock Peak Performance with Form Cure is finely tuned to bring parts to their maximum mechanical properties. Form Cure’s turntable rotates to provide uniform exposure. The heating system preheats the chamber to get parts ready for optimum post-curing.

NextDent offers a wide range of dental 3D printing materials to meet your needs.

The materials are available in 1L containers.

Ortho Clear

All types of splints and retainers

Ortho Model

Printing models specifically used in ‘Vacuum Moulding’ applications

www.henryschein.com.au

Buy 3 Get 10% OFF!

Cast

Residue-free combustible 3D printing material

13

PUK D3 LAMPERT

The operating concept of the new PUK D3: simple, intuitive, user-friendly.

•

•

•

•

•

Extremely simple touchscreen operation: Select metal – select welding situation – weld!

Easily review the optimum setting ranges for the selected welding task Pre-settings for conventional materials, e.g. for cobalt-chromium and high-gold alloys, stainless steel, titanium and much more, as well as for typical welding situations Setting of parameters for 'Power', 'Time' and menu navigation with one single rotary controller Setting of 'Power' and 'Time' also by a swiping action on the high-contrast display

NOW

$7500 Includes Microscope!

KaVo laboratory drives

KaVo laboratory drives

The stars among the laboratory drives!

Always to your benefit: The KaVo Service advantage.

The top models following the successful K9 laboratory drives

Easy and quick cleaning.

Ball bearings can be easily exchanged (see Instructions for Use) Low service / maintenance expenditure.

Optimised settings menu with scope on demand for enablingUnbeatable or disabling practical valueadditional for money. functions such as the expert menu with 16 different welding curves, the program memory for 20 custom programs, the retention mode or the tack welding function. The selection of basic functions such as lighting, welding sequence or choice of language is a quick and easy process.

4

Slight colour differences are due to the printing process. © Copyright KaVo Dental GmbH.

14

K5plus* Only $2623 SAVE OVER

40%

*Available in Knee Control, Foot Control and Bench Control

Orders: 1300 65 88 11

HANDPIECES AND MOTORS

LABORATORY LABORATORY SPECIAL OFFERS SPECIAL OFFERS

SAVE

20% 20% SAVE

Experience Unprecedented Smoothness and Power Experience Unprecedented Smoothness and Power

P R E S TO A Q U A L U X L E D I L L U M I N AT I O N P R E S TO A Q U A L U X L E D I L L U M I N AT I O N

Achieve optimum performance and Achieve precision with the lubricationoptimum performance free and air turbine handpiece precision with the lubricationfree airLED turbine handpiece featuring illumination and featuring illumination and coolantLED spray. water water coolant spray.

Optic

Optic

MODEL PRESTO AQUA LUX (120V) MODEL PRESTO AQUA LUX (120V) ORDER CODE Y1001–150

$3690

Features: – Features: 320,000 min-1 – –Water coolant 320,000 min-1spray Water coolant spray – –Requires no lubrication Requires no lubrication – –Swivel twist-free handpiece Swivel twist-free handpiece – –Low noise and vibration – Low noise and vibration – Unique dust-proof mechanism Unique mechanism – –NSK LEDdust-proof is equivalent to daylight

$3690 RRP

RRP $4613 $4613

– NSK LED is equivalent to daylight

ORDER CODE Y1001–150

U LUTLITM AA TE M IM T E XXL L BBEENNC CHH TTO O P S Y SS TT EEM Features: Features: Speedofof1,000~50,000 1,000~50,000 min-1 – –Speed DigitalSpeed SpeedDisplay Display – –Digital – Maintenance Mode Setting Setting – Maintenance Mode AutoCruise CruiseFunction Function – –Auto ErrorCode CodeDisplay Display Function Function – –Error PowerSupply: Supply:AC AC 120V 120V or or 230V – –Power 230V 50/60 50/60Hz Hz – Weight: 2.8 kg – Weight: 2.8 kg – Dimensions : W167 x D247 x H77 (mm) – Dimensions : W167 x D247 x H77 (mm)

Torque micromotor Torque micromotor MODEL UMXL-GT (230V) MODEL UMXL-GT (230V) ORDER CODE Y141–469 ORDER CODE Y141–469

Compact micromotor Compact micromotor MODEL UMXL-GC (230V) MODEL UMXL-GC (230V) ORDER CODE Y141–470 ORDER CODE Y141–470

$2171 $2171 RRPRRP $2714 $2714

*Not applicable to connect with an air turbine handpiece

*Not applicable to connect with an air turbine handpiece

V O LV E R E i 7 C O R E L E S S M I C R O M O T O R

V O LV E R E i 7 C O R E L E S S M I C R O M O T O R The VOLVERE i7 is another in NSK’s quest to The advance VOLVERE i7 is another provide dental technicians advance in NSK’s quest to access to itstechnicians globally renowned provide dental dental The access to laboratory its globallyengines. renowned stylish VOLVERE i7 delivers dental laboratory engines.

Thea compact, advanced design, stylish VOLVERE i7 delivers a all essential features and excellent compact, advanced design, all value for money.

Features: – Light and compact to fit Features: into the space – Light andsmallest compact to fit –into Microcomputer the smallest Control space Auto Cruise Function – –Microcomputer Control

– Auto Cruise Function

$1565

$1565

Includes: –Includes: Control unit –– Micromotor Control unitHandpiece –– Foot control Handpiece Micromotor –– Handpiece Stand Foot control

RRP RRP $1957

$1957

Standard Micromotor

– Handpiece Stand

Standard Micromotor

essential features and excellent value for money.MODEL: VOLVERE I7 RM STANDARD ORDER CODE: Y1003493

STANDARD MODEL: VOLVERE I7 RM E-TYPE MODEL: VOLVERE I7 E ORDER CODE: Y1003493

E-Type Micromotor

ORDER CODE: Y1003494

E-TYPE MODEL: VOLVERE I7 E ORDER CODE: Y1003494

E-Type Micromoto

Rely on Us

™

Orders: 1300 65 88 22

Orders: 1300 65 88 22

Rely on Us www.henryschein.com.au ™

www.henryschein.com.au Rely on Us

™

All quoted prices exclude GST

All quoted prices exclude G

www.henryschein.com.auRely on Us

™

15

LAB ESSENTIALS

YELLOWSTONE AINSWORTH •

Super-smooth pouring, excellent hardness and a very low setting expansion make this the ideal dental stone for most laboratory processing tasks

•

Sets to a smooth, shiny surface and offers minimal splintering when grinding

A1-AIYS20B

20kg Bag

SAVE

10%

$88.43

INVESTO BITE & BOXING WAX

SAVE

20%

•

Deep red wax ideal for bite registration and boxing in impressions

•

Sheet dimensions 160mm x 80mm x 1.5mm

A1-ABOR130

$42.24

500g Box

INVESTO MODELLING WAX

SAVE

•

Specifically engineered for the Australian climate and suitable for all laboratory requirements

•

Sheet dimensions 160mm x 80mm x 1.5mm

A1-ABOR100

25%

$30.08

500g Box

RETAINER BOX ZIRC

SAVE

10%

•

One piece construction with Solid locking mechanism

•

Surface Disinfect Only

Assorted packs of 12 colours Small (2.5 x 7.6cm)

$25.95

Large (3.8 x 7.6cm)

$27.95

ZIRCON BRITE PASTE DVA Zircon Brite is a solid polish provided in a jar that can be used to polish all types of crown and bridge restorative meterials.

•

Allows for the fast and simple re-sealing and polishing of Zirconium crowns and bridges after adjustments.

•

Provides a high, marble-like luster in seconds.

•

Eliminates the need to re-glaze a restoration following adjustments, thereby saving approximately 15 minutes in time by eliminating the need to progress through a re-glazing cycle in a furnace.

•

Eliminate the exposure of the restoration to another high-temperature firing cycle.

DV-ZIRCON20

16 16

SAVE

20g jar

$102.02

View Lab Essentials on the Henry Schein Halas App

DV-ZIRCON40

40g jar plus 20 Bristle Brushes

10%

$133.25

www.he nrysc he in.c om.a u

Orders: 1300 65 88 11O r d e r s 1 3 0 0 6 5 8 8 1 1