NextDent, the leading manufacturer of dental materials for 3D printing
Biocompatible 3D printing materials Company
NextDent B.V. was founded in 2012 in The Netherlands as an independent subsidiary company under the Vertex Global Holding. Vertex-Dental B.V. from The Netherlands is another subsidiary company under the same holding with a 76 years track record on R&D, production and international registrations of dental materials for various applications.
Mission
Our mission is to become the worldwide leading manufacturer of biocompatible 3D printing materials. Our R&D team is constantly searching for the best possible solutions in order to become a benchmark for 3D printing in the dental field. We are focussing on custom-made solutions in close cooperation with our customers.
Research and Development
NextDent B.V. has joined forces with higher education institutes such as Fontys Applied Science Eindhoven and the Chemical Technology department of Utrecht University. They are involved in the continuous development of 3D printing technologies and related materials. Furthermore, we cooperate closely with well-known worldwide dental universities as well.
Biocompatible 3D printing materials
So what makes NextDent materials unique? It’s the sheer choice you have in printable materials for a wide range of applications. Our materials are classified in accordance with the medical device directive 93/42/EEC, making them suitable for local registrations as well. We offer the materials in a wide spectrum of colours, depending on the daily use and the preferences of our customers. All CE-classified and biocompatible materials have been tested extensively for biological safety, ensuring they can be used on patients without any restrictions. The materials are tested for e.g. cytotoxicity, sensitivity, genotoxicity and internal and external irritation.
Tray NextDent Tray is a biocompatible certified Class I material designed to print individual impression trays. The material distinguishes itself because of the high printing speed and accuracy. NextDent Tray resin enables technicians to make even the most complex trays in a matter of minutes. The printed trays are rigid and suitable for all types of impression material, making high-quality, high-precision impressions possible. Property
Value
Colour
Blue & Pink
Method
Brookfield viscosity at 23° Celsius
0.9 – 1.4 Pa·s
Hardness Shore D
80 – 90
ISO 868:2003
Flexural strength
≥ 80 MPa
ISO 20795-1:2013
Flexural modulus
≥ 2.000 MPa
ISO 20795-1:2013
The material is available in 1.000g containers.
ASTM D2162
Model NextDent Model is characterized by its high degree of accuracy, making this material suitable for detailed master models where a high precision is needed. The models show high visual details due to color and opacity and has an ideal surface for scan-impressions. The accurate printed models are the perfect base for creating your dental work piece. Property
Value
Method
Colour
Oker
TM18
Brookfield viscosity at 23° Celsius
0.7 – 1.2 Pa·s
ASTM D2162
Hardness Shore D
80 – 90
ISO 868:2003
Flexural strength
≥ 40 MPa
ISO 527-1: 2012
Flexural modulus
≥ 1.000 MPa
ISO 527-1: 2012
The material is available in 1.000g containers.
Model Ortho NextDent Model Ortho is a material suitable for printing models specifically used in ‘Vacuum Moulding’ applications. This material is faster and easier to print compared to other model materials, but is slightly less accurate. Property
Value
Method
Colour
Opaque Beige
TM18
Brookfield viscosity at 23° Celsius
1.0 – 1.5 Pa·s
ASTM D2162
Hardness Shore D
80 – 90
ISO 868:2003
Flexural strength
≥ 40 MPa
ISO 527-1: 2012
Flexural modulus
≥ 1.000 MPa
ISO 527-1: 2012
The material is available in 1.000g containers.
SG (Surgical Guide) NextDent SG is a biocompatible certified Class I material, developed for the printing of Surgical Guides. Because of the high precision of this material it is easy to insert drill sleeves, directly after printing. Whereby enabling even greater precision during surgery. NextDent SG is resistant to disinfectants. In addition, the material can also be sterilised using gamma rays and autoclave. The use of an autoclave does not affect the dimensional stability, therefore NextDent SG can be used in every operating theatre. Property
Value
Colour
Translucent Orange
Method
Brookfield viscosity at 23° Celsius
1.1 – 1.6 Pa·s
Flexural strength
≥ 80 MPa
ISO 20795-1:2013
Flexural modulus
≥ 2.000 MPa
ISO 20795-1:2013
Hardness Shore D
80 – 90
ISO 868:2003
Sterilisation at 134° Celsius
Max 5 min.
The material is available in 1.000g containers.
ASTM D2162
Ortho Clear NextDent Ortho Clear is a is a biocompatible Class IIa material for all types of splints and retainers. It is a clear and thereby aesthetically pleasing 3D print material, characterised by high strength, fracture- and wear resistance. Suitable for printers with wavelength of 365 - 385 nm. Property
Value
Colour
Clear
Method
Brookfield viscosity at 23° Celsius
0.8 – 1.3 Pa·s
Ultimate flexural strength
No break
ASTM D2162 ISO 20795-2:2013
Flexural modulus
≥ 1.300 MPa
ISO 20795-2:2013
Maximum stress intensity factor
≥ 1.1 MPa 1/2
ISO 20795-2:2013
Total fracture work
≥ 6.000 J/m 2
ISO 20795-2:2013
Water sorption
≤ 65 µg/mm3
ISO 20795-2:2013
Water solubility
≤ 5 µg/mm3
ISO 20795-2:2013
Hardness Shore D
80 – 90
ISO 868:2003
The material is available in 1.000g containers.
Ortho Rigid NextDent Ortho Rigid is a biocompatible Class IIa material developed for digital manufacturing of splints. In combination with suitable software, it is possible to easily design and print splints. Property
Value
Method
Colour
Transparent Blue
TM18
Brookfield viscosity at 23° Celsius
0.8 – 1.3 Pa·s
ASTM D2162
Ultimate flexural strength
≥ 75 MPa
ISO 20795-2:2013
Flexural modulus
≥ 1.800 MPa
ISO 20795-2:2013
Maximum stress intensity factor
≥ 0.9 MPa
ISO 20795-2:2013
Total fracture work
≥ 3.000 J/m 2
ISO 20795-2:2013
Water sorption
< 32 µg/mm3
ISO 20795-2:2013
Water solubility
< 5 µg/mm3
ISO 20795-2:2013
Hardness Shore D
80 – 90
ISO 868:2003
The material is available in 1.000g containers.
Ortho IBT NextDent Indirect Bonding Tray is a biocompatible certified Class I material for orthodontic applications. Making use of the right software, you can plan the exact location of orthodontic brackets and design the Indirect Bonding Tray. Due to the flexible characteristics of the printed indirect bonding trays, orthodontist can easily place all the brackets at once, saving time at the chair. Property
Value
Colour
Clear
Method
Brookfield viscosity at 23° Celsius
1.1 – 1.6 Pa·s
Elongation at break
12 – 18 %
ISO 527-1:2012
Shore A
80 – 90
TM25
The material is available in 1.000g containers.
ASTM D2162
C&B NextDent C&B is a biocompatible Class IIa material for printing Crowns and Bridges (containing 1-3 pieces). The material properties in combination with its abrasion resistance makes NextDent C&B suitable for this application. NextDent C&B can be cemented with cement. Property
Value
Method
Colour
Various colours
TM18
Brookfield viscosity at 23° Celsius
0.9 – 1.4 Pa·s
ASTM D2162
Flexural strength
≥ 85 MPa
ISO 10477:2003
Flexural modulus
≥ 2.100 MPa
ISO 10477:2003
Water sorption
< 30 µg/mm3
ISO 10477:2004
Water solubility
< 5 µg/mm3
ISO 10477:2004
Hardness Shore D
80 – 90
ISO 868:2003
The material is available in 1.000g containers.
C&B MFH NextDent C&B Micro Filled Hybrid is a biocompatible classified Class IIa material* developed for crown and bridges. The balance between inorganic fillers and the resin give the material it’s high strength and wear resistance. The material is easy to finish and polish, and can be stained with all types off composite staining kits. Due to the perfect balance between opacity and translucency the printed crown blends in perfect between the existing teeth. Property
Value
Method
Colour
Various colours
TM18
Brookfield viscosity at 23° Celsius
0.8 – 1.3 Pa·s
ASTM D2162
Flexural strength
≥ 100 MPa
ISO 10477:2003
Flexural modulus
≥ 2.400 MPa
ISO 10477:2003
Maximum stress intensity factor
≥ 1.5 MPa 1/2
ISO 20795-1:2013
Total fracture work
≥ 7.000 J/m 2
ISO 20795-1:2013
Water sorption
< 30 µg/mm3
ISO 10477:2004
Water solubility
< 5 µg/mm3
ISO 10477:2004
The material is available in 1.000g containers. * Expected Q3.
Base NextDent Base is a biocompatible Class IIa material suitable for printing all types of denture bases. This material has low shrinkage compared to standard PMMA denture base materials, which result in excellent fitting denture bases. The low amount of residual monomer left after post-processing gives the material it’s biocompatibility. Property
Value
Method
Colour
Various Pink
TM18
Brookfield viscosity at 23° Celsius
1.0 – 1.5 Pa·s
ASTM D2162
Flexural strength
≥ 85 MPa
ISO 20795-1:2013
Flexural modulus
≥ 2.100 MPa
ISO 20795-1:2013
Water sorption
< 32 µg/mm3
ISO 20795-1:2013
Water solubility
< 1,6 µg/mm3
ISO 20795-1:2013
Residual Monomer
< 1%
ISO 20795-1:2013
Hardness Shore D
80 – 90
ISO 868:2003
The material is available in 1.000g containers.
Cast NextDent Cast is a residue-free combustible 3D printing material, suited for all kinds of purposes. Whether you need a support structure, a frame or orthodontic devices. Simply design, print and cast making use of our castable material and the investment material that is recommended. Casting the parts in the metal you require. Property
Value
Colour
Purple
Method
Brookfield viscosity at 23° Celsius
1.0 – 1.4 Pa·s
ASTM D2162
Hardness Shore D
80 – 90
ISO 868:2003
The material is available in 1.000g containers.
Gingiva Mask NextDent Gingiva Mask is a flexible material that can be used in combination with the model material. Making it possible to print parts of the model that need a certain flexibility. Property
Value
Colour
Pink
Method
Brookfield viscosity at 23° Celsius
1.1 – 1.6 Pa·s
ASTM D2162
Elongation at break
15 – 25 %
ISO 527-1: 2012
The material is available in 1.000g containers.
LC-3DPrint Box The LC-3DPrint Box is a new revolutionary UV light box, suitable for post curing 3D printing materials. The new LC-3DPrint Box is equipped with 12 UV light bulbs who are strategically placed inside the box. This ensures that a product is illuminated from all sides, which results in a quick and uniform curing cycle. The spacious inside (ø 26 cm, H 19,5 cm) of the LC-3DPrint Box allows you to easily cure multiple products at once. In addition, the box has enough space to place an articulator inside. If necessary, the UV light bulbs can be changed easily. The new LC-3DPrint Box allows you to post-cure NextDent 3D materials. Post-curing is required in order to obtain the final material properties. After the printing process the printed material is not yet fully cured and should be treated. First, the material needs to be cleaned in an alcohol bath followed by the so-called post-curing cycle. Post-curing is an UV light treatment to ensure that NextDent materials obtain full polymer conversion, through this the residual monomer is reduced to a minimum and the highest mechanical properties are obtained. This procedure is a necessary step to produce a biocompatible end-product. Always follow the instructions for use relevant to the corresponding material.
Specification
Value
Related voltage
110V/230V, 50/60Hz, 2,6A/1,3A
Power consumption
290W
Fuse
T2.0A, AC250V
Dimension
W 41 X D 44 X H 38 cm
Weight
22 Kg
Overview NextDent materials
Tray
Model
Model Ortho
SG
Ortho Clear
Ortho Rigid
3D printing material for individual impression tray
3D printing material for dental models-high precision
3D printing material for dental models for vacuum casting applications
3D printing material for surgical guides
3D printing material for splints and retainers
3D printing material for splints
Ortho Indirect Bonding Tray 3D printing material for indirect bonding tray
C&B
C&B MFH
Base
Cast
Gingiva Mask
LC-3DPrint Box
3D printing material for crowns & bridges
3D printing material for micro filled crowns & bridges
3D printing material for denture base
3D printing material for casting technique Residue-free combustible material
3D printing material for gingiva mask
High-capacity UV post curing unit
NextDent B.V.: info@nextdent.com, +31 88 616 04 40
IN201601UK
NextDent B.V. Centurionbaan 190 3769 AV Soesterberg The Netherlands +31 88 616 04 40 info@nextdent.com