ParaPost® by Henry Schein Australia

ParaPost®X™ System ParaPost®: The world’s most trusted Post and Core System

A complete family of posts and ParaPost Fiber Lux

e v i s s Pa e v i s Pas e v i t c A

Passive, Translucent Fiber Resin Esthetic Post Passive cemented, parallel-sided post with rounded head for direct post/core build-ups in one appointment. Ideal for clinical situations where an esthetic, metal-free restoration is desired. Light transmitting, can be used with self, dual or light-cured cements.

ParaPostXH Passive, Titanium Alloy Post Passive cemented, parallel-sided post with rounded, undercut head for direct post/core build-ups in one appointment. Ideal for glass-ionomer/composite core build-ups which require the safety of a passive post.

ParaPostXT Threaded, Titanium Alloy Post Threaded, parallel-sided post with rounded, undercut head for direct post/core build-ups in one appointment. Ideal for glassionomer/composite core build-ups which require XTra retention and XTra safety.

ParaPostXP

e v i s Pas e v i s Pas e v i s s Pa

Passive, Titanium Alloy or Stainless Steel Post Passive cemented, parallel-sided post with flat head for direct post/core build-ups in one appointment. Ideal for multi-rooted post/core build-ups.

ParaPostXP Casting Components Passive cemented, parallel-sided, prefabricated casting components for the direct/indirect casting technique. Ideal for clinical situations requiring the additional strength of a precise, one-piece cast post/core and choice of alloy.

ParaPostXP Gold No-Ox Post Passive cemented, parallel-sided gold post for the direct/indirect casting technique. Ideal for cast post/cores that require the most precise fit and optimum resistance to oblique forces.

d core for any clinical situation! ParaPost ParaCore Dual Cure Core Material Dual cure resin core build-up material, available in a fast, easy Automix system. Syringeable and stackable with fluoride release, it is ideally suited for core build-ups incorporating metal or nonmetal posts. Can also be used as a post cement. ml NEW 5 ix Autom e Syring

ParaPost ParaForms Plastic Core Build-up Forms Plastic and disposable for single use, available in 10 sizes. Easy to place, cut, trim and remove. The ideal complement for direct core build-ups.

ParaCem Universal DC Cement Self Cure Resin Cement Highly retentive, dual-curing resin cement. Fluoride release and low film thickness allowing cement to easily vent. Ideal for cementing metal and non-metal posts, as well as crowns, bridges, veneers, inlays and onlays. Can also be used for core build-ups.

ParaPost®X™ System

If you are now using ParaPost® or ParaPost Plus®... Consider the improvements offered by ParaPost®X™ System... Tensile Retention(1)

Resistance to Rotation(1)

+47%

+50%

Resistance to Oblique Forces(1) .

+68%

(1) Source: Lucius Pitkin Inc., Consulting, Engineers, Testing Laboratories

What makes ParaPost®X™ Posts so resistant to oblique forces? It’s a combination of our new unique manufacturing technique... (Fig. 1)

The new raised diamond-shape retention pattern is made by a unique cold-forming process which produces an uninterrupted fibrous grain structure in the alloy, increasing the post resistance to oblique forces.

(Fig. 2)

Traditional machined retention patterns produce an interrupted grain structure in the alloy, reducing the post resistance to oblique forces.

Fig. 1

Fig. 2

...along with our new diamond-shape retention pattern... (Fig. 3) The new raised diamond-shape retention pattern has a larger cross-sectional area at any point along the entire post length, providing greater resistance to oblique forces. (Fig. 4) Traditional circular retention patterns have a smaller cross-sectional area at each groove, which concentrates oblique forces toward the inner areas, reducing the post resistance to oblique forces. Fig. 3

Fig. 4

...and these additional features. Two intermediate sizes (1.14 mm/1.40 mm) Size 3 (.036“/0.90 mm) Size 4 (.040“/1.00 mm) Size 4.5 (0.45“/1.14 mm) Size 5 (.050“/1.25 mm) Size 5.5 (.055“/1.40 mm) Size 6 (.060“/1.50 mm) Size 7 (.070“/1.75 mm)

Drills are laser-marked at 7, 9 and 11 mm

n m

ParaPostX Posts are made from Ti6AL4V titanium alloy, which is twice as strong as pure titanium. Ti6AL4V is used for high stressbearing implant parts (ie., hip joints, dental abutment retaining screws).

ParaPost®X™ System Post One-Office-Visit Technique

If you are now using ParaPost® or ParaPost Plus®... Consider the advantages of ParaPostXP: 1. Standard ParaPost flat head is ideal for multi-rooted core build-ups. 2. New, patented, raised diamond-shape retention pattern provides: Greater Resistance to Rotation(1) 47% more resistant to rotation than ParaPost Plus. Superior Tensile Retention(1) 50% more tensile retention than ParaPost Plus. Improved Cement Venting Multiple cement venting channels for improved venting of excess cement. 3. Unique manufacturing technique provides: Increased Resistance to Oblique Forces(1) 68% more resistant to oblique forces than ParaPost Plus.

Titanium Alloy or Stainless Steel

Durable, color-coded, compact organizer Cat.# P780 XP Intro Kit (stainless steel) P780T XP Intro Kit (titanium)

(1) Source: Lucius Pitkin Inc., Consulting, Engineers, Testing Laboratories

4. ParaPostXP posts are available in your choice of:

ParaPost®X™ System Post One-Office-Visit Technique

If you are now using glass-ionomer or composite core materials... Consider the advantages of ParaPostXH: 1. Rounded edges of the head minimize stress points that could lead to core failure. 2. Undercut, slotted head securely locks-on glass-ionomer and composite core materials firmly and easily. 3. New, patented, raised diamond-shape retention pattern, which is identical to ParaPostXP, provides maximum retention with the additional safety of a passive post.

Attention All Unity Users: ParaPostXH offers the same high level of retention and safety that you have experienced with Unity Posts, PLUS... Smaller, Anatomically-Shaped Head Reduces the need for additional trimming of the post head. More Retentive Head Additional undercuts facilitate “locking-on“ of glass-ionomer and composite core build-ups. Two New Intermediate Sizes - 4.5 and 5.5 Permit fitting the post to the canal and not the canal to the post.

Durable, color-coded, compact organizer Cat.# P880 XH Intro Kit

ParaPost®X™ System Post One-Office-Visit Technique

If you are now using an active threaded post... Consider the advantages of ParaPostXT: XTra retention with XTra safety! 1. Rounded edges of the head minimize stress points that could lead to core failure. 2. Undercut, slotted head securely locks-on glass-ionomer and composite core materials firmly and easily.

3. Broad, flat shoulder stop provides security against over-insertion and the build-up of apical stress. 4. Patented, low-profile threads cut a clear path through the dentin, minimizing insertional stress. The interruptions permit venting of excess cement and dentin debris to relieve hydrostatic pressure. 5. Threads are located only in the stronger coronal section where root canal walls are thick. Apical trimming of post will not affect mechanical retention. 6. Passive, raised diamond-shape retention pattern in the apical section where root canal walls are more sensitive to fracture, provides additional retention and greater resistance against rotation. 7. Parallel sides distribute functional stress equally along the entire length of the post.

Durable, color-coded, compact organizer Cat.# P680 XT Intro Kit

ParaPost®X™ System Metal-Free Post One-Office-Visit Technique

If you are considering a metal-free post...

ParaPost® FIBER LUX TM

Translucent Esthetic Post System Superior Esthetics ParaPost Fiber Lux is an alternative to metal posts when esthetic or metal-free restoration is desired. Fiber Lux is made of translucent fiber resin material that reflects the natural hues of the tooth and eliminates shadows through composite restorations, as well as at the gingival/crown interface.

Material Composition Glass Fiber

60%

Resin

40%

Restoration with Metal post (Left) Restoration with Fiber Lux (Right)

Superior Strength The high percentage of uni-directional fibers gives the Fiber Lux post excellent strength characteristics, without compromising flexibility.

Physical Properties Flexural Strength

1600 MPa

Compressive Strength

630 MPa

b Cross Section of Fiber Lux Post

Fast On-Command Cementation The translucent, light transmitting fiber resin material in the ParaPost Fiber Lux allows it to be used with light-cured cements and core materials. This gives you greater control over cement set time, and the convenience of being able to use self, dual or light-cured materials.

Superior Head Design

ParaPost® Fiber Lux

Other Post

The rounded head design of the Fiber Lux reduces stress in the core material.

Posts that have heads with sharp edges or angles create stress points in the core material that can lead to micro-fractures.

Using computer analysis and imaging (Finite Element Analysis)*, areas of stress concentrations can be predicted. Red indicates areas of greatest stress. Note stress points at each sharp edge of the post with a non-rounded head design.

* Analysis by SAS Ingenieurbüro AG, Switzerland

ParaPost®X™ System Metal-Free Post

ParaPost Fiber Lux One-Office-Visit Technique with ParaPost Fiber Lux,

Preparation of post space with ParaPost size #4.5 drill.

Trial seating of ParaPost Fiber Lux post #4.5.

Adhesive/conditioner applied to post space.

Excess adhesive/conditioner removed with a paper point.

Coat post with cement, and introduce into post space with paper point or Lentulo Spiral.

ParaPost Fiber Lux is seated in post space and cement is light-cured (if using a lightcuring cement).

Core build-up using ParaCore and ParaForm core former.

Final post and core build-up.

Excellent Radiopacity

The ParaPost Fiber Lux comes in six sizes, minimizing the amount of dentin that needs to be removed. Fiber Lux posts are available in ParaPost sizes 3, 4, 4.5, 5, 5.5 and 6. Each post is color coded for easy identification and is compatible with your ParaPost drills.

The radiopacity of the ParaPost Fiber Lux allows the post to be seen clearly on a radiograph, improving post placement accuracy. Radiograph of Fiber Lux and two other fiber posts.

Laboratory Technique with ParaPost Fiber Lux and ParaPost ParaCore Advantages: • Aesthetic, prevents shadowing effect common with metal restorations • Saves time, eliminates casting procedures • Less expensive, not as brittle and easier to retrieve than zirconia post

Master model poured from impression.

Apply separator.

Select Fiber Lux. Shorten from apical end if necessary using a separating disc.

Build-up core using ParaCore.

Ceramic or composite material can be used to fabricate crown.

(Refer to Casting Technique section for step by step illustrations)

Fiber Lux

Comprehensive Range of Sizes

ParaPost®X™ System Core One-Office-Visit-Technique

If you are now using amalgam or resin for core build up... ParaPost®

ParaCore

™ Core and Adhesive Compatibility

Research has proven that good retention between bonding systems and core material is vital to the longevity of the restoration. To achieve optimum bond strength, it is important

that adhesive and core materials are compatible. ParaCore materials meet that criterion.

ParaPost®

automix

ParaCore

™

5 ml

dual cure core material

ParaCore Automix 5 ml is an economical alternative to a cartridge system. It is a dual-cure resin core build-up in an easy to handle syringe. • Available in two shades:

• Cuts like dentin • No dispenser needed • Can be used as a post cement

- Bright white to differentiate from tooth structure - Dentin shade for esthetic restorations under ceramic crowns

• Small mixing tip, up to 80% less waste compared to cartridge systems

• Non-slumping consistency, stackable

Compressive Strength

283 MPa

• Bonds to all fiber resin post materials, especially ParaPost Fiber Lux

Flexural Strength

122 MPa

Average Particle Size

2 µm

Range of Particle Size

0.1-5.0 µm

ParaPost®

• Chemically cures in 4 minutes • Fluoride release • Radiopaque

Cat.# C5885 ParaCore automix 5ml

automix

ParaCore

™

25 ml

dual cure core material

ParaCore Automix is a 25 ml high strength, dual-cure resin core build-up material in an easy to dispense automix cartridge.

• Fast, easy delivery system

• Versatile two shade system:

• 25 ml (48 g) automix cartridge dispenses a consistent, uniform mix • Chemically cures in 4 minutes • Cuts like dentin

- Bright white to differentiate from tooth structure - Dentin shade for esthetic restorations under ceramic crowns • Syringeable and stackable

Compressive Strength

337 MPa

• Bonds to fiber resin post materials, especially ParaPost Fiber Lux

Flexural Strength

151 MPa

• Fluoride release

Average Particle Size

1.2 µm

• Radiopaque

Range of Particle Size

0.1-3.0 µm

Cat.# C5855 - ParaCore Automix 25 ml White C5856 - ParaCore Automix 25 ml Dentin

ParaPost®X™ System Core and Cement One-Office-Visit Technique

ParaPost®

ParaForm

™

Quick and easy core build-up. Works great with any core material.

• The ideal complement for direct core build-ups

• Easy to place, cut, trim and remove • Numeric coding in 10 sizes

• Plastic, disposable for single use

Cat.# C5860 ParaForm Complete Kit

“The use of a coreformer provides a predictable, economical and efficient method for producing a strong, well-adapted and durable foundation core retained by a prefabricated post (dowel) and/or retention pins.” David R. Federick, DMD, MScD, FACD, FICD

Trial Seating of ParaForm coreformer.

Extrude core material directly from the mixing tip into the ParaPost ParaForm until it is completely full.

The light-cured core buildup after removal of ParaForm coreformer with a scalpel or a bur.

Place ParaForm onto tooth. Remove excess material prior to light-curing.

ParaCore

• Transparent for light-curing

Finished core build-up after preparation.

All that a dentist needs in one cement: Universal Dual Cure Cement

Ideal for cementing posts, crowns, bridges, veneers, inlays and onlays. Can also be used for core build-up. • Smooth thixotropic consistency • Easy handling • Easy removal of surplus material • High shear bond strength – excellent retention

• Low film thickness – precise post adaption • Dual-Cure: - Light-curing for immediate cure - Self-cure in 4 minutes

Bond strength (self-cured) ParaCem® Universal DC

Cement

Film thickness / um ParaCem® Universal DC Multilink®*

Multilink®*

Embrace™*

Panavia F *

Maxcem™*

Rely X Unicem™*

Panavia F™*

™

Variolink II™*

Rely X Unicem™*

FujiCem™*

Enamel

Maxcem™*

Dentin

Embrace™* 0 Shear Bond Strength

16.8 MPa (dentin)

Shear Bond Strength

15.1 MPa (enamel)

Film Thickness

15.8 µm

SBS / MPa Source: internal documentation * are not trademarks of Coltène/Whaledent

FujiCem™* 0

Internal Documentation, Measurements according to ISO 4049

Manufacturer’s specifications, Reality 2004, Vol. 18 Reality Research Lab, Reality 2004, Vol. 18

ParaPost®X™ System Cast Post and Core Casting Technique

If you are now using custom casting... Why do opinion leaders recommend and use the ParaPost Casting System? Because ParaPost parallel-sided cast posts fit the first time without adjustments! Only ParaPost casting components provide a precision fit through each step of the casting technique. Each component (drills, precious metal posts, burn-out posts, impression posts, temporary posts) has been carefully calibrated to preserve the dimensions of the post space, provide an optimum cement film thickness and eliminate the problems associated with undercuts.

The result: - First time fit - No time-consuming adjustments - No costly remakes

Because ParaPost parallel-sided cast posts are up to 230% more retentive! Research indicates that parallel-sided posts with a serrated surface provide more retention than either smooth parallel-sided posts or smooth tapered posts, which are typical of most custom castings.

Caputo, A.A.; Standlee, J.P.; Biomechanics in Clinical Dentistry, Quintessence Publishing Co. Inc. p. 196, 1987

Because parallel-sided ParaPost castings offer greater safety! Parallel-sided ParaPost castings evenly distribute functional forces, eliminating the wedging effect of tapered cast posts. According to one university study, “parallel-sided, serrated dowels were the most clinically successful intra-coronal reinforcement. The cast ParaPost and Core Technique with a 100% success rate was slightly more successful than ParaPost and amalgam or composite resin core technique with a 97.7% success rate. The clinical success rate of tapered cast dowels and cores (87.3%) was less than endodontically treated teeth without intra-coronal reinforcement.”

Method Cast ParaPost & Core ParaPost & Amalgam or Composite Resin Core No Reinforcement Pin-Composite Resin Core Tapered Cast Dowel and Core Pin-Amalgam Core Threaded Post

Total

Success

Failure

No.

No. %

3.0

100

132 838

10.4 65.4

129 97.7 748 89.9

3 84

2.3 10.1

1.0

92.3

7.7

245 8 5

19.2 0.6 0.4

214 87.3 6 75.0 3 60.0

31 2 2

12.7 25.0 40.0

Sorensen, J.A.; Martinoff, J.T.; “Clinically significant factors in dowel design” Journal of Prosthetic Dentistry: 52 (1): 28-35, July 1984

Cat.# P781 - XP Casting Intro Kit

ParaPost®X™ System Cast Post and Core Casting Technique

If you are now using custom casting... Consider why the ParaPostXP Casting System is superior to custom casting... Predictability The same preparation technique as in the One-Office-Visit is used. Starting with the ParaPostX Drill that corresponds to the last Gates-Glidden or Peeso Drill used, gradually step up to the next larger drill until the preplanned diameter and depth are achieved.

Accuracy

Precision The precision-fit of the titanium temporary post allows the temporary restoration to be placed without temporary cement on the post itself. This permits easy removal of the temporary restoration, eliminates time consuming removal of temporary cement from the post space and preserves the integrity of the post space preparation.

Retention On the master model, the impression post is replaced with either a corresponding burn-out or Gold No-Ox post. This provides a precise post pattern with a retention pattern and venting channels. The entire length of the post space is replicated. This eliminates the need to fill the post space with wax and avoids breakage of the wax post/core build-up during removal.

Clinical Success The result is a predictable and precise fitting cast post and core which eliminates the need for adjustments and remakes.

Casting Technique

A corresponding plastic impression post is used to take the impression. This eliminates the need to fill the post space with impression material and ensures replication of the entire length of the post space without any undercuts.

ParaPost®X™ System Cast Post and Core Casting Technique

If you are now casting with prefabricated casting components... Consider why the ParaPostXP is superior to any casting system... It all starts with our patented plastic Burn-Out Posts... Greater Safety Parallel-sided castings evenly distribute functional stress while eliminating the wedging effect of tapered cast posts.

Increased Retention Parallel-sided, raised diamond-shape retention pattern is incorporated into the cast post, providing additional retention and greater resistance against rotation.

Safer Cementation Multiple venting channels allow an easy escape of excess cement, preventing the build-up of apical hydrostatic pressure.

Easy and Reliable Identification All system components are color-coded to the drills, ensuring accurate matching of posts to drills.

Each component of the ParaPostXP Casting System provides additional value! ParaPostX System Drills Stainless Steel • Depth-calibrated drills for precise channel depth measurement (7, 9, 11 mm from apical end) • Color-coded for quick and reliable identification • Non-end cutting for low perforation risk • Precisely matched to each post for optimal cement film thickness

ParaPostXP Impression Posts Plastic

ParaPostXP Temporary Posts Titanium

• Precise, time-saving impressions

• Secure retention of temporary crowns

• Impression of entire length of post space without undercuts

• Friction grip for snug placement, eliminating the need for temporary cement in the canal

• Color-coded for easy identification of post sizes

• Avoids time consuming removal of temporary cement from post space, preserving the diameter of post space preparation • Color-coded for quick and reliable identification

ParaPost®X™ System Cast Post and Core Casting Technique

If you are now using custom casting... Consider why ParaPostXP No-Ox posts are superior to other gold posts... It all begins with our unique manufacturing technique... ParaPostXP Gold No-Ox Posts: The retention pattern has been cold-formed: the grain structure is uninterrupted following the retention pattern with no evidence of recrystallization after the core has been cast to the post. Result: Increased strength and resistance to fracture.

Competitive Gold Posts: The retention grooves have been machined: the grain structure is interrupted with initial signs of recrystallization after the core has been cast to the post. Result: Reduced strength and resistance to fracture.

Casting Technique

Alloy Content: No-Ox Alloy Pt 39.0% Au 10.0% Pd 26.0% Ag 24.5%

Physical Properties: No-Ox Alloy Melting area (°C) Density (g/cm) Hardness (NV 5/30)

1280-1350 14.6 5

...continues with our innovative design... • Patented raised diamond-shape retention pattern • Parallel-sided posts • Multiple venting channels

...and ends with our well-proven, reliable precious alloys. • Gold No-Ox Alloy: original ParaPost alloy successfully used for over 20 years

ParaPost®X™ System Cast Post and Core Casting Technique

ParaPostXP easily creates precise cast post/core restorations regardless of your technique! Direct Casting Technique using ParaPostXP Casting Components

1. Prepare canal

2. Place Gold Post or Burn-Out Post

3. Build-up resin

4. Fabricate temporary crown using a Temporary Post

5. Sprue, invest and cast (lab)

6. Cement final restoration

Indirect Casting Technique using ParaPostXP Casting Components

1. Prepare canal

2. Take impression using Impression

3. Fabricate temporary crown using a Temporary Post

4. Pour master model and place Burn-Out Post (lab)

5. Wax-up core; sprue, invest and cast (lab)

6. Cement final restoration

Metal-Free Restoration Lab Technique using Fiber Lux & ParaCore

1. Prepare canal

2. Take impression using Impression Post

3. Fabricate temporary crown using a Temporary Post

4. Pour master model and place Fiber Lux Post (lab)

5. Build up core with ParaCore (lab)

(See ParaPost Fiber Lux Post section for more information)

6. Cement final restoration Note: Crown can be ceramic or indirect composite

ParaPost®X™ System Conversion Table One-Office-Visit Technique

ParaPost System®

new

old

new

ParaPost Plus®

ParaPost XP

ParaPost XH

ParaPost XT

passive cemented

threaded, active cemented

old

passive cemented

ParaPost® Fiber Lux passive cemented

Introductory Kits P260 or P260T

P780 or P780T

3 4 4.5 5 5.5 6 7

Drills

Stainless Steel Posts

PF170

3 4 4.5 5 5.5 6 7

3 4 4.5 5 5.5 6

0.9 1.0 1.14 1.25 1.40 1.50 1.75 0.9 1.0 1.14 1.25 1.40 1.50 1.75

0.9 1.0 1.14 1.25 1.40 1.50

3 4 4.5 5 5.5 6 7

0.9 1.0 1.14 1.25 1.40 1.50 1.75 0.9 1.0 1.14 1.25 1.40 1.50 1.75

3 pcs.

Titanium Posts

P680T

P880

••• • • • • ••• • • •• ••• • • • • ••• • • • • • • • • • • • • • • • •

see XP

10 pcs. P- 84-3 P- 84-4 P- 84-4.5 P- 84-5 P- 84-5.5 P- 84-6 P- 84-7

25 pcs. P- 44-3B P- 44-4B P- 44-4.5B P- 44-5B P- 44-5.5B P- 44-6B P- 44-7B

10 pcs. 25 pcs. P- 284-3 P- 284-3B P- 284-4 P- 284-4B P- 284-4.5 P- 284-4.5B P- 284-5 P- 284-5B P- 284-5.5 P- 284-5.5B P- 284-6 P- 284-6B P- 284-7 P- 284-7B

10 pcs.

25 pcs.

10 pcs.

25 pcs.

• • • • • • • 10 pcs.

see XP

3 pcs. P- 623-0 P- 624-0 P- 624-5 P- 625-0 P- 625-5 P- 626-0 6 Asst. P-682A

25 pcs.

10 pcs.

25 pcs.

old

new

ParaPost System®

ParaPost® XP

passive cemented

Introductory Kits P781

• • • • • • • 20 pcs. P-46-3 • P-46-4 • P-46-4.5 • P-46-5 • P-46-5.5 • P-46-6 • P-46-7 • 20 pcs.

Plastic Impression Posts

Titanium Temporary Posts

Plastic Burn-Out Posts

10 pcs. P-51-3 P-51-4 P-51-4.5 P-51-5 P-51-5.5 P-51-6 P-51-7

20 pcs.

100 pcs. P-51-3E P-51-4E P-51-4.5E P-51-5E P-51-5.5E P-51-6E P-51-7E

25 pcs. P-51-3B P-51-4B P-51-4.5B P-51-5B P-51-5.5B P-51-6B P-51-7B

10 pcs.

• • • • • • • P-746-3 • P-746-4 • P-746-4.5 • P-746-5 • P-746-5.5 • P-746-6 • P-746-7 •

P-743-3 P-743-4 P-743-4.5 P-743-5 P-743-5.5 P-743-6 P-743-7

25 pcs.

10 pcs.

P-53-3 P-53-4 P-53-4.5 P-53-5 P-53-5.5 P-53-6 P-53-7

• • • • • • •

100 pcs.

P-751-3B P-751-3E • • P-751-3 P-751-4B P-751-4E • • P-751-4 P-751-4.5B P-751-4.5E • • P-751-4.5 P-751-5B P-751-5E • • P-751-5 P-751-5.5B P-751-5.5E • • P-751-5.5 P-751-6B P-751-6E • • P-751-6 P-751-7B P-751-7E • P-751-7 • No-Ox Precious Alloy 1 pc. P-752-3 P-752-4 P-752-4.5 P-752-5 P-752-5.5 P-752-6 P-752-7

Gold Posts

Nickel Silver Posts

20 pcs.

P-43-3 P-43-4 P-43-4.5 P-43-5 P-43-5.5 P-43-6 P-43-7

10 pcs.

• • • • • • • P-753-3 • P-753-4 • P-753-4.5 • P-753-5 • P-753-5.5 • P-753-6 • P-753-7 •

3 pcs. P- 42-3 P- 42-4 P- 42-4.5 P- 42-5 P- 42-5.5 P- 42-6

30 pcs.

P- 88-3B • P- 683-0 P- 683-0B • P- 784-3B • P- 88-3 • P-P- 784-3 P- 88-4B • P- 684-0 P- 684-0B • P- 784-4B • P- 88-4 • P- 784-4 P88-4.5 88-4.5B • P- 684-5 P- 684-5B • 784-4.5 P784-4.5B • P- 784-5 P- 784-5B • P- 88-5 P-P- 88-5B P- 685-0B • • P- 784-5.5 P- 784-5.5B • P- 88-5.5 P- 88-5.5B • P-P- 685-0 P- 685-5B • • P- 784-6 P- 784-6B • P- 88-6 P- 88-6B • P- 685-5 • P- 784-7 P- 784-7B • P- 88-7 P- 88-7B • 686-0 P- 686-0B • • • •

244-3 P- 244-3B • P- 744-3 P- 744-3B • • P-P- 244-4 • P- 744-4 P- 744-4B • • P- 244-4.5 P-P- 244-4B 244-4.5B • P- 744-4.5 P- 744-4.5B • • P- 244-5 P- 244-5B P- 744-5B • • P- 244-5.5 P- 244-5.5B • P-P- 744-5 P- 744-5.5B • • P- 244-6 P- 244-6B • P- 744-5.5 P- 744-6B • • P- 244-7 P- 244-7B • P- 744-6 • 744-7 P- 744-7B • •

Casting Technique

• • • • • • •

5 pcs. PF-1713 PF-1714 PF-17145 PF-1715 PF-17155 PF-1716

• • • • • • • • • • • •

Conversion Table

10 pcs. P- 44-3 P- 44-4 P- 44-4.5 P- 44-5 P- 44-5.5 P- 44-6 P- 44-7

• • • • • • •

P- 42-3 P- 42-4 P- 42-4.5 P- 42-5 P- 42-5.5 P- 42-6 P- 42-7 6 Asst. P-42A

Fiber - Resin

Color-Coding Sizes Diameter in mm

ParaPost®X™ System Ordering Information ParaPostX System Post Introductory Kits

P-781

P-780

3 4 4.5 5 5.5 6 7

ParaPostXP System Casting Technique Kit Impression Posts Temporary Posts Burn-Out Posts ParaPost X Drills

25 pcs. 25 pcs. 25 pcs. 7 pcs.

ParaPostXP System One-Office-Visit Kit Stainless Steel Posts ø .036” 0.90 mm Brown ø .040” 1.00 mm Yellow ø .045” 1.14 mm Blue ø .050” 1.25 mm Red ø .055” 1.40 mm Purple ø .060” 1.50 mm Black ø .070” 1.75 mm Green ParaPost X Drills Univ. Hand Driver

4 pcs. 5 pcs. 5 pcs. 5 pcs. 2 pcs. 2 pcs. 2 pcs. 7 pcs. 1 pc.

P-780T ParaPostXP System One-Office-Visit Kit Titanium Alloy Posts 3 ø .036” 0.90 mm Brown 4 ø .040” 1.00 mm Yellow 4.5 ø .045” 1.14 mm Blue 5 ø .050” 1.25 mm Red 5.5 ø .055” 1.40 mm Purple 6 ø .060” 1.50 mm Black 7 ø .070” 1.75 mm Green ParaPost X Drills Univ. Hand Driver

P-880

4 pcs. 5 pcs. 5 pcs. 5 pcs. 2 pcs. 2 pcs. 2 pcs. 7 pcs. 1 pc.

3 4 4.5 5 5.5 6 7

PF-170 3 4 4.5 5 5.5 6

ParaPostXH System One-Office-Visit Kit Titanium Alloy Posts ø .036” 0.90 mm Brown ø .040” 1.00 mm Yellow ø .045” 1.14 mm Blue ø .050” 1.25 mm Red ø .055” 1.40 mm Purple ø .060” 1.50 mm Black ø .070” 1.75 mm Green ParaPost X Drills Univ. Hand Driver ParaPost Fiber Lux One-Office Visit Introductory Kit ø .036” 0.90 mm Brown ø .040” 1.00 mm Yellow ø .045” 1.14 mm Blue ø .050” 1.25 mm Red ø .055” 1.40 mm Purple ø .060” 1.50 mm Black ParaPost X Drills Univ. Hand Driver

4 pcs. 5 pcs. 5 pcs. 5 pcs. 2 pcs. 2 pcs. 2 pcs. 7 pcs. 1 pc.

2 pcs. 3 pcs. 3 pcs. 3 pcs. 2 pcs. 2 pcs. 4 pcs. 1 pcs.

P-680T ParaPostXT System One-Office-Visit Kit Titanium Alloy Posts 3 ø .036” 0.90 mm Brown 4 ø .040” 1.00 mm Yellow 4.5 ø .045” 1.14 mm Blue 5 ø .050” 1.25 mm Red 5.5 ø .055” 1.40 mm Purple 6 ø .060” 1.50 mm Black ParaPost XT Drills Univ. Hand Driver Metal Wrench A for sizes 3, 4, 4.5 Metal Wrench B for sizes 5, 5.5, 6 ParaPost XT Accessories Universal Hand Driver L-590 L-594

L-595

L-596

C5856 ParaCore Automix 25 ml Intro Kit Dentin 25 x 5 ml ParaCore automix dentin, Dispenser 25 x 5 ml, 20 Mixing Tips, 20 Intra Oral Tips, 2.5 x 5 ml Etchant Gel S, 3 ml Adhesive Conditioner A, 3 ml Adhesive Conditioner B, 10 Assorted coreformers, Accessories C5853 ParaCore Automix 25 ml Single Dentin 25 x 5 ml ParaCore automix dentin, 20 Mixing Tips, 20 Intra Oral Tips C5854 ParaCore Automix 25 ml Single White 25 x 5 ml ParaCore automix white, 20 Mixing Tips, 20 Intra Oral Tips ParaCore Automix Syringe C5885 ParaCore Automix 5 ml Intro-Kit 2 x 5 ml ParaCore automix syringe white 2 x 5 ml ParaCore automix syringe dentin 1 x 3 ml ParaBond® Non-Rinse Conditioner 1 x 3 ml ParaBond® Adhesive A 1 x 3 ml ParaBond® Adhesive B

20 Mixing Tips with Oral Tips 1 ParaPost® ParaFormTM Trial Kit C5886 ParaCore Automix 5 ml White Refill 2 x 5 ml ParaCore automix syringe white 20 Mixing Tips with Oral Tips C5887 ParaCore Automix 5 ml Dentin Refill 2 x 5 ml ParaCore automix syringe dentin 20 Mixing Tips with Oral Tips C6759 Mixing Tips MT/BROWN/CLEAR/WHITE/43/WITH OT*

P7342 ParaPost® Adhesive Conditioner Refill Adhesive Conditioner A 3 ml 3 ml Adhesive Conditioner B P5860 ParaForm Complete Set 50 Assorted coreformers in 10 sizes

ParaPostXT Metal Wrench B for sizes 5, 5.5, 6

1 pc.

ParaPostXT Metal Wrench A + B

2 pcs.

P5871 ParaForm Refill # 1 10 coreformers size 1 P5872 ParaForm Refill # 2 10 coreformers size 2 P5873 ParaForm Refill # 3 10 coreformers size 3 P5874 ParaForm Refill # 4 10 coreformers size 4 P5875 ParaForm Refill # 5 10 coreformers size 5 10 coreformers size 6 P5877 ParaForm Refill # 7 10 coreformers size 7 P878 ParaForm Refill # 8 10 coreformers size 8 P5879 ParaForm Refill # 9 10 coreformers size 9 P5880 ParaForm Refill # 10 10 coreformers size 10

P5861 ParaForm Trial Kit 10 Assorted coreformers

1 pc.

P5876 ParaForm Refill # 6 C7486 ParaBond® Adhesive Refill 1 x 3 ml Non-Rinse Conditioner 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B

1 pc.

ParaPostXT Metal Wrench A for sizes 3, 4, 4.5

ParaPost ParaCore, ParaPost ParaForms C5855 ParaCore Automix 25 ml Intro Kit White 25 x 5 ml ParaCore automix white, Dispenser 25 x 5 ml, 20 Mixing Tips, 20 Intra Oral Tips, 2.5 x 5 ml Etchant Gel S, 3 ml Adhesive Conditioner A, 3 ml Adhesive Conditioner B, 10 Assorted coreformers, Accessories

3 pcs. 5 pcs. 5 pcs. 5 pcs. 4 pcs. 3 pcs. 6 pcs. 1 pc. 1 pc.

*MT = Mixing Tips, WITH OT= Oral Tip

ParaPost®X™ System Ordering Information ParaPostX System Post Refills

ParaPostXP System - Nickel Silver Posts 10 pcs. ø .036” 0.90 mm Brown P-753-3 ø .040” 1.00 mm Yellow P-753-4 ø .045” 1.14 mm Blue P-753-4.5 ø .050” 1.25 mm Red P-753-5 ø .055” 1.40 mm Purple P-753-5.5 ø .060” 1.50 mm Black P-753-6

ParaPostXP System - Stainless Steel Posts 10 pcs. 25 pcs. P-744-3 P-744-3B ø .036” 0.90 mm Brown ø .040” 1.00 mm Yellow P-744-4 P-744-4B ø .045” 1.14 mm Blue P-744-4.5 P-744-4.5B ø .050” 1.25 mm Red P-744-5 P- 744-5B ø .055” 1.40 mm Purple P-744-5.5 P-744-5.5B ø .060” 1.50 mm Black P-744-6 P-744-6B ø .070” 1.75 mm Green P-744-7 P-744-7B

ParaPostXT System - Titanium Alloy Posts 30 pcs. 10 pcs. ø .036” 0.90 mm Brown P-683-0 P-683-0B ø .040” 1.00 mm Yellow P-684-0 P-684-0B ø .045” 1.14 mm Blue P-684-5 P-684-5B ø .050” 1.25 mm Red P-685-0 P-685-0B ø .055” 1.40 mm Purple P-685-5 P-685-5B ø .060” 1.50 mm Black P-686-0 P-686-0B

ParaPostXP System No-Ox-Precious Alloy Posts 1 pc. ø .036” 0.90 mm Brown P-752-3 ø .040” 1.00 mm Yellow P-752-4 ø .045” 1.14 mm Blue P-752-4.5 ø .050” 1.25 mm Red P-752-5 ø .055” 1.40 mm Purple P-752-5.5 ø .060” 1.50 mm Black P-752-6 ø .070” 1.75 mm Green P-752-7

ParaPostXP System - Titanium Alloy Posts 10 pcs. 25 pcs. ø .036” 0.90 mm Brown P-784-3 P-784-3B ø .040” 1.00 mm Yellow P-784-4 P-784-4B ø .045” 1.14 mm Blue P-784-4.5 P-784-4.5B ø .050” 1.25 mm Red P-784-5 P-784-5B ø .055” 1.40 mm Purple P-784-5.5 P-784-5.5B ø .060” 1.50 mm Black P-784-6 P-784-6B ø .070” 1.75 mm Green P-784-7 P-784-7B

ParaPost Accessories

ParaPostXP System - Plastic Impression Posts 20 pcs. ø .036” 0.90 mm Brown P-743-3 ø .040” 1.00 mm Yellow P-743-4 ø .045” 1.14 mm Blue P-743-4.5 ø .050” 1.25 mm Red P-743-5 ø .055” 1.40 mm Purple P-743-5.5 ø .060” 1.50 mm Black P-743-6 ø .070” 1.75 mm Green P-743-7

ParaPostXH System - Titanium Alloy Posts 10 pcs. 25 pcs. ø .036” 0.90 mm Brown P-88-3 P-88-3B ø .040” 1.00 mm Yellow P-88-4 P-88-4B ø .045” 1.14 mm Blue P-88-4.5 P-88-4.5B ø .050” 1.25 mm Red P--88-5 P-88-5B ø .055” 1.40 mm Purple P-88-5.5 P-88-5.5B ø .060” 1.50 mm Black P-88-6 P-88-6B ø .070” 1.75 mm Green P-88-7 P-88-7B

ParaPostXP System - Titanium Temporary Posts 20 pcs. ø 0.90 mm Brown P-746-3 ø 1.00 mm Yellow P-746-4 P-746-4.5 ø 1.14 mm Blue P-746-5 ø 1.25 mm Red ø 1.40 mm Purple P-746-5.5 P-746-6 ø 1.50 mm Black ø 1.75 mm Green P-746-7

ParaPost Fiber Lux Refills

ParaPostXP System - Plastic Lab Burn-Out Posts 10 pcs. 25 pcs. 100 pcs. ø 0.90 mm Brown P-751-3 P-751-3B P-751-3E P-751-4 P-751-4B P-751-4E ø 1.00 mm Yellow ø 1.14 mm Blue P-751-4.5 P-751-4.5B P-751-4.5E ø 1.25 mm Red P-751-5 P-751-5B P-751-5E ø 1.40 mm Purple P-751-5.5 P-751-5.5B P-751-5.5E ø 1.50 mm Black P-751-6 P-751-6B P-751-6E P-751-7E P-751-7B P-751-7 ø 1.75 mm Green

ParaPost Drill Refills Drill Refills ø 0.90 mm Brown ø 1.00 mm Yellow ø 1.14 mm Blue ø 1.25 mm Red ø 1.40 mm Purple ø 1.50 mm Black ø 1.75 mm Green Assorted (6 pcs.)

ParaPostX Drills (two-fluted) 3 pcs. P-42-3 P-42-4 P-42-4.5 P-42-5 P-42-5.5 P-42-6 P-42-7 P-42-A

ParaPostXT Drills (three-fluted) 3 pcs. P-623-0 P-624-0 P-624-5 P-625-0 P-625-5 P-626-0 N/A P-682-A

5 pcs. PF-171-3 PF-171-4 PF-171-4.5 PF-171-5 PF-171-5.5 PF-171-6

ParaCem® Cement C7485 ParaCem® Universal DC Intro-Kit Contents 1 x 2.5 g ParaCem Base A2 1 x 2.5 g ParaCem Base B3 1 x 2.5 g ParaCem Base white opaque 3 x 2.5 g ParaCem Catalyst 1 x 3 ml ParaBond Non-Rinse Conditioner 1 x 3 ml ParaBond Adhesive A 1 x 3 ml ParaBond Adhesive B 10 x Assorted coreformers C7481 ParaCem® Base A2 Refill 1 x 2.5 g Base A2 C7482 ParaCem® Base B3 Refill 1 x 2.5 g Base B3 C7483 ParaCem® Base Refill 1 x 2.5 g Base white opaque C7484 ParaCem® Catalyst Refill 1 x 2.5 g Catalyst C7486 ParaBond® Adhesive Refill 1 x 3 ml Non-Rinse Conditioner 1 x 3 ml 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B

Ordering Information

ø .036” 0.90 mm Brown ø .040” 1.00 mm Yellow ø .045” 1.14 mm Blue ø .050” 1.25 mm Red ø .055” 1.40 mm Purple ø .060” 1.50 mm Black

ParaPost System Sterilizable Organizer P-691 1 pc. ParaPost Drill Stand (fits 7 ParaPost Drills) P-42D 1 pc.

ParaPost®X™ System

Authorized EU Representative: Coltène / Whaledent GmbH + Co. KG Raiffeisenstrasse 30 89129 Langenau / Germany Tel. +49 (0) 7345 805 0 Fax +49 (0) 7345 805 201 productinfo@coltenewhaledent.de

Coltène / Whaledent C / Buenavista, 3–1°B 28220 Majadahonda Madrid , Spain Tel. +34 91 638 64 92 Fax +34 91 638 62 79 coltenewhaledent@teleline.es

Coltène/Whaledent AG Feldwiesenstrasse 20 9450 Altstätten / Switzerland Tel. +41 (0) 71 757 53 00 Fax +41 (0) 71 757 53 01 office@coltenewhaledent.ch

Coltène / Whaledent S.a.r.l. 19 Boulevard Alexandre Oyon 72058 Le Mans Cedex 2 / France Tel. +33 (0) 2 43 39 30 30 Fax +33 (0) 2 43 39 30 40 cw@coltenewhaledent.fr

Coltène / Whaledent Ltd. The President Suite C, Kendal House Victoria Way, Burgess Hill West Sussex, RH15 9NF / UK Tel. +44 (0) 1444 23 5486 Fax +44 (0) 1444 87 0640 hq@coltenewhaledent.co.uk

Coltène / Whaledent website: http://www.coltenewhaledent.com

P/N 31219D

Coltène / Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, OH 44223 / USA Tel. USA & Canada 1 800 221 3046 +1 330 916 8800 Fax +1 330 916 7077 info@coltenewhaledent.com