Self-adhering and weldable EPDM rolls Name
hertalan easy.weld PLUS
Roll length
20 metre
Material thickness
2,0 mm
Roll width
1400 mm
Accreditations
KOMO UEAtc K4276, BBA 91/2728/C, DIN 7864 T.1, DIN 4102 B2
hertalan EPDM is a synthetic rubber and thanks to its unique qualities in all climates, hertalan is the ideal product for roofing and cladding systems alike. hertalan EPDM has an exceptional life span (30 years for the complete system), is 100% ozone and UV resistant, root resistant to FLL/ prEN, self extinguishing NEN 6383, bitumen resistant, rapidly installed and complies with all current building regulations.
hertalan products hertalan easy.weld PLUS rolls With the introduction of hertalan easy.weld PLUS rolls a new variation is added to the range of hertalan EPDM roofing products. Hertalan easy.weld PLUS is a self adhering roll with the German FLL and European prEN 13948 approved EW-joint technique. These rolls are specially designed for flat and sloped garden roofs and other roofs with a constant usage, like balconies, terraces and parking decks. Installation: rapid & safe The green TPE strips will ensure a permanent bond when heated with hot air. hertalan easy.weld is quick and easy to apply and does not contain solvents. Roofing system For intensive and extensive garden roofs it is very important that all the joints are 100% root resistant. To achieve this we use the successfully tested and certified hertalan easy.weld EW-joint technique. The tests were undertaken by the German institute, Landwirtschaftskammer Rheinland Gartenbauzentrum in Essen. The German certificate can be downloaded from our website. hertalan easy.weld PLUS can also be used for every other adhered roofing system.
easy.weld Accessories Accessories The hertalan easy.weld roof system is complemented by the following accessories:
External corner
Skylight corner
Prefabricated corners For waterproofing of standard 90˚ corners prefabricated internal and external corners are available with the green TPE on the inside or outside. These corners are 1,2 mm thick and measure 150x150x200 mm. Skylight corners Special 45˚ angled corners are manufactured for the waterproofing of skylights. These corners are 1,2 mm thick and measure 150x150x180 mm.
Preformed pipe sleeve
Site sleeve
Preformed pipe sleeves For the waterproofing of pipe protrusions there are 2 different types of hertalan easy.weld preformed pipe sleeves. The diameter differs from ø 20 to 75 mm and from ø 70 to 125 mm. The measurements of the sleeves are 300x300mm and 350x350mm. Site sleeves In case a standard preformed pipe sleeve is not suitable it is possible to use a site sleeve. These sleeves can be customised on site to the required diameter. The sleeve is 1,2 mm thick and measures 450x450 mm.
Roofdrain
flash.weld
Roofdrain hertalan easy.weld roofdrains are available in various diameters from 40 to 140 mm and square sizes of 60x80 and 60x100 mm. The sleeves are 1,2 mm thick and measure 200x200 and 300x300 mm. flash.weld For waterproofing non standard details hertalan flash.weld is available in a width of 200 mm on rolls of 5 metre long. More information Hertalan UK Lowmoor Road Kirkby-in-Ashfield Nottinghamshire NG17 7DE
T: F: E: I:
01623 721 500 01623 721 700 info@hertalan.co.uk www.hertalan.co.uk