Indoor Climate Solutions provided by Holcim Indonesia

Solutions provided by Holcim Indonesia

Indoor Climate Solution There are two type of Indoor Climate Solution applied in Ignatius Loyola Ecotech Campus: 1.

Underfloor Cooling (UFC) Underfloor Cooling (UFC), utilizing floor concrete screed at Ground Floor and radiates cool upwards.

2.

Thermally Activated Building System (TABS), utilizing structural concrete slab radiates cool upwards and downwards

3. FloCrete

Pipe modules placement between slab’s re-bar

Concrete pouring

Solutions provided by Holcim Indonesia

FloCrete • FloCrete is concrete with high flowability that can achieve flat surface conditions with high efficiency in terms of time and manpower usage.

FloCrete advantages: • Fast placing with less labor required (30% less) • Time saving up to 33% • Easier to pump over higher and greater distances (50% higher capacity) • Less compaction energy required, reduce noise 20% • No repair of honeycombs required

Solutions provided by Holcim Indonesia

ThruCrete • ThruCrete is a dual solution, as a concrete pavement solution that also serves as a liaison with the layer below it so that the water can be absorbed by the soil. With its pores, ThruCrete can absorb water up to 120 liters per cubic meter every minute ThruCrete advantages: • Excellent drainage ability • Reduce the size of drainage system • Easy to replace • Construction cost saving

Solutions provided by Holcim Indonesia

Bataton •

Produced with precast cement technology, bataton is strong building material exclusive to Solusi Rumah, a unique franchise network from Holcim that offers home renovation and building solutions at affordable prices. Bataton comes in a complete range that can be applied to various parts of the building, from structural wall to ventilation facade. Since bataton can be applied without formwork, the use of wood in Ignatius Loyola Ecotech Campus construction process can be reduced significantly.

Bataton advantages: • High compressive strength • Easy to apply into various shape, e.g curved walls and corners

• Elimination of wood results in lower Total Cost of Ownership • Relatively flat surface finished enables thickness reduction of skim coat, also lower the Total Cost of Ownership