DEMON catalog

Race Demon™ Carburetors

Demon 98 Carburetors

Mighty Demon™ E-85 & Blow-thru calibrations

King Demon™ Carburetors

SixShooter™ Induction Systems

P/N L30979 Printed in USA © Demon Fuel Systems Inc. 2013 Bowling Green, KY 42101 | Phone: 270-901-3346 www.demoncarbs.com

DEMON™ FUEL SYSTEMS LIMITED WARRANTY - NO OTHER WARRANTIES APPLYDemon™ Fuel Systems warrants its new performance products to be free from defects in material and workmanship

Demon Fuel Systems set a new standard for performance and looks when we launched our famous

for a period of 90 days from date of purchase.

Demon carburetors over a decade ago. They offer classic modular carburetor performance plus

Demon™ Fuel Systems Limited Warranty specifically does not apply to products which have been (a) modified or

modern looks. Killer features and wide array of styles to choose from means there is no reason to

altered in any way; (b) subjected to adverse conditions such as misuse, neglect, accident, improper installation or

look anywhere else for performance carburetors. Check out our Mighty Demon™, Speed Demon™, Road Demons™and the all new Street Demon™ carburetors today!

adjustment, dirt or other contaminants, water, corrosion or faulty repair; or (c) used in other than those applications recommended by Demon™ Fuel Systems. Demon™ Fuel Systems also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current Demon™ Fuel Systems catalog.

This Limited Warranty is extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties which extend beyond those stated herein. Demon™ Fuel Systems offers no other warranties, express or implied beyond this Limited Warranty.

In the event of an alleged defect in material or workmanship, Demon™ Fuel Systems’ responsibility is strictly limited to repair or replace the defective product. Demon™ Fuel Systems has no other obligation express or implied. Final warranty determination will be in the sole discretion of Demon™ Fuel Systems. Demon™ Fuel Systems shall not be responsible for: (a) actual or alleged labor, transportation or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Demon™ Fuel Systems.

To initiate the warranty process: Return the alleged defective product to the original place of purchase with dated purchase receipt. Warranty claims will be rejected if the consumer cannot establish date of purchase. Unless the product was purchased directly from Demon™ Fuel Systems, do not send directly to Demon™ Fuel Systems. Demon™ Fuel Systems assumes no responsibility for unauthorized products sent directly to Demon™ Fuel Systems. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

SECTION

PAGES

CARBURETORS

TUNING & SERVICE PARTS

2 - 10

11 - 19

MERCHANDISING

20

WARRANTY

IBC

Demon™ Fuel Systems has implemented a new approach to quality. The transformation to modern performance and reliability took a big leap at the beginning of 2012. Today’s Demon carbs are produced to a much higher standard than ever before: the OEM-style ISO 9001:2008 benchmark to be exact. We have made huge investments in updated tooling, fuel calibrations, state-of-the-art manufacturing processes, product improvements, as well as in a team of engineers, builders, technicians, and representatives committed to delivering the highest quality products and exceptional customer service. We hope to earn your business one carb at a time!

2

Street demon™ carburetorS

neW! WICKED POWER! The ALL NEW Street Demon™ redefines the street carburetor with clean looks and ease of use! The Street Demon offers enthusiasts a straightforward carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Its optimized calibration and dual mounting pattern make it Run–Ready™ for a wide variety of engines and vehicles!

“I put the new Street Demon carb on my ‘72 D100 shop truck with a 400 horsepower 318, and it fired up and idled like it was pre–tuned for my engine, and has performed flawlessly ever since!”

- steve Dulcich, Editor, Engine Masters Magazine

1900 Ball-burnished Aluminum

FEatuREs DEsIgnED FOR usE On stREEt RODs, M MusCLE CaRs anD tRuCKs WItH stOCK OR HI-PERFORManCE EngInEs.

PaRt#

DEsCRIPtIOn

1900

625 Street Demon - Ball Burnished Aluminum 625 Street Demon - Hand Polished Aluminum 750 Street Demon - Ball Burnished Aluminum 750 Street Demon - Hand Polished Aluminum

1902 1903 1905

also available in hand-Polished aluminum!

• Smooth styling - patented timeless design fits modern as well as traditional themed vehicles (Patent No.: US D648,746 S) • Integrated fuel bowl/main body design with gasket above fuel level and no plugged passages to eliminate all potential leak paths • Small 1-3/8” primary throttle bores of the 625 CFM & 1-11/16” primary throttle bores of the 750 CFM combined with proven Triple-Stack™ boosters deliver amazingly crisp throttle response and drivability, superior fuel atomization and improved fuel economy • Goggle Valve Secondary (GVS™) throttle plate delivers unobstructed airflow for power you can hear and feel • Secondary air valve control - torsion spring valve control/adjustment permits seamless primary to secondary throttle response regardless of the throttle opening rate (unique contoured profile developed for better cylinder-to-cylinder fuel distribution) • One-piece air horn assembly • 2 Stage metering rods easily accessible without carburetor

disassembly or removal • Optional vacuum step-up springs, metering rods & jets available to dial in hi-end performance • Integrated 700R4/200-4R transmission kickdown cable mounting location for proper shifts • Ford A/T kickdown (does not work with AOD transmissions) • Available TPS kit allows use with 4L60 and 4L80 transmissions • Developed from the ground up with great looks and ease of use in mind • Easy to clean and maintain • Electric Choke Management means easy cold starts • Single fuel inlet for simple installation • Dual mounting bolt pattern - fits any street 4bbl intake (square flange or spread bore - spread bore adapter may be required)

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

neW!

Street demon™ carburetorS

Looking for something even more hi-tech than the Street Demon™ aluminum carburetor? The Street Demon carburetor with Aerospace Composite fuel bowl incorporates the latest technology designed to combat the problems with today’s challenging fuel chemistry. By incorporating a composite fuel bowl, heat transfer from the intake manifold and hot under-hood temperatures to the fuel are minimized, resulting in fuel temperatures up to 20 degrees less than conventional two piece carburetors. By keeping the fuel cool, the engine makes more power, idles better and starts quicker. The unique one piece fuel bowl is made utilizing the latest in materials technology and is highly chemical resistant, ideal for today’s corrosive fuel additives.

Don’t settle for the competition’s dated design or spend a fortune on the latest EFI fad, demand Demon for “PERFORManCE tHat’s Out OF tHIs HIs WORLD!”

1901 Composite with Ball-burnished Aluminum

FEatuREs - saME as tHE PaRt# 1900 aLuMInuM stREEt DEMOn WItH tHE FOLLOWIng ExCEPtIOns: • Aerospace Composite fuel bowl offers significant heat insulating benefits over aluminum fuel bowl - keeps fuel up to 20º cooler for optimum performance with modern fuels.

“The cam in my El Camino is a bit too big, which makes life tough for the carburetor. I was pleasantly surprised by how well that Street Demon worked right out of the box on my combination.

It has excellent part throttle response.”

- Jeff smith, senior tech Editor, Car Craft Magazine DEsIgnED FOR usE On stREEt RODs, MusCLE CaRs anD tRuCKs WItH stOCK OR HI-PERFORManCE EngInEs.

PaRt#

DEsCRIPtIOn

1901

1904

625 Street Demon - Composite with Ball Burnished Aluminum 750 Street Demon - Composite with Ball Burnished Aluminum All trademarks are property of their respective owners.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

3

4

Street demon™ carburetor comPariSon

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

Street demon™ technical detailS

5

IntEgRatED FuEL BOWL/ MaIn BODy DEsIgn • Gasket above fuel level and no plugged passages eliminates all potential leak paths • Available in standard aluminum or Aerospace Composite bowl

tRIPLE-staCK™ PRIMaRIEs • Small 1-3/8” primary throttle bores of the 625 CFM & 1-11/16” primary throttle bores of the 750 CFM combined with proven Triple-Stack™ boosters deliver amazingly crisp throttle response and drivability • Superior fuel atomization • Improved fuel economy for street performance gOggLE VaLVE sECOnDaRy (gVs™) tHROttLE PLatE • Delivers unobstructed airflow for power you can hear and feel • GVS™ makes maximum air flow while maintaining the crisp throttle response delivered by small primary bores

sECOnDaRy aIR VaLVE COntROL • Torsion spring valve control/adjustment permits seamless primary to secondary throttle response regardless of the throttle opening rate • Unique contoured profile developed for better cylinder-to-cylinder fuel distribution

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

6

KraSS & bernie diScuSS the neW Street demon go valve!

w w w . d e m o n c a r b s . c o m

road demon™ Jr. carburetorS

7

The Road Demon™ Jr is the ideal carburetor for budget–conscious enthusiasts needing a carburetor for stock to mild performance levels. It’s designed for small block V8 engines with cam profiles from less than 220 degrees duration at 0.050”. The Road Demon Jr shares many of the basic design features of popular Road Demon and delivers crisp throttle response, easy tuning, great fuel economy and great performance. The Road Demon Jr is available in 525–, 625– and 725–cfm ratings. Road Demon Jr features as standard equipment: manual or electric choke, vacuum secondaries and 2–corner idle. Each Road Demon Jr model comes standard with Ford kickdown linkage.

FEatuREs

DEsIgnED FOR MILD PERFORManCE V6 anD nEaRLy stOCK aPPLICatIOns WItH 260-305 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

6282020VM 6282020VE

525 Road Demon Jr - Manual choke 525 Road Demon Jr - Electric choke

DEsIgnED FOR MILD PERFORManCE anD tOWIng aPPLICatIOns WItH 305-350 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

6282010VM 6282010VE

625 Road Demon Jr - Manual choke 625 Road Demon Jr - Electric choke

• Patented air entry design • Concentric Venturi • Float bowls with EZ-Safe float level adjustment • Manual Choke or Electric Choke • Vacuum Secondary operation • Large diameter, trouble-free transfer tube with dual-captured O-rings • 2 Corner idle adjustment • Adjustable Primary Jets • Built-in Power Valve blow out protection • Vacuum ports: 2 constant, 1 ported • Available with Ford kickdown linkage • Can be affordably upgraded with Demon Fuel System components • Every carb is wet flow tested and base line calibrated at the factory • Most common tuning parts interchange from other manufacturers (Jets, Power Valves, Squirters, Needle & Seat Assemblies, Gaskets, etc.)

DEsIgnED FOR stOCK OR MILD PERFORManCE aPPLICatIOns WItH 383-409 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

6282040VM 6282040VE

725 Road Demon Jr - Manual choke 725 Road Demon Jr - Electric choke

The walls and contours of the choke tower are smooth and free-flowing, designed to maximize air flow.

Traditional casting methods can produce unwanted ridge lines which obstruct airflow.

Demon carburetors employ a new die-casting technology, which provides the most accurate, repeatable method of producing concentric venturii without misalignment or shift.

All trademarks are property of their respective owners.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

8

road demon™ carburetorS

DEsIgnED FOR MILD PERFORManCE V6 anD stOCK aPPLICatIOns WItH 260-400 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

4282020VE

525 Road Demon - Vacuum Secondary

DEsIgnED FOR MILD PERFORManCE V6 anD tOWIng aPPLICatIOns WItH 302-460 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

4282010VE

625 Road Demon - Vacuum Secondary

DEsIgnED FOR stOCK OR MILD PERFORManCE aPPLICatIOns WItH 350-500 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

4402020VE

725 Road Demon - Vacuum Secondary

New Quick-change vacuum pod allows for easy spring adjustment.

Styled and calibrated for Street Rods and mildly modified Street Machines and light trucks, the Road Demon™ is an impressive performer. With a remarkably smooth choke tower design, vacuum secondaries and patented air entries, the Road Demon offers extremely smooth operation with strong throttle response. Each Road Demon model will be available with Ford kickdown linkage. Available in 525, 625 and 725 CFM models, the Road Demon is perfect for small displacement V8s or V6 engines. The Road Demon 525 targets mild performance V6 engines from 260 to 400 cid.

The Road Demon 625 targets mild performance V8 engines from 302 to 460 cid, and rated at 250–350 horsepower. The Road Demon 725 is perfect for stock V8 engines from 350 to 500 cubic inches. This makes them ideal for daily drivers as well as weekend cruising for a wide range of vehicles.

FEatuREs • Four-Corner Idle Circuitry • Large Capacity Float Bowls • Large Glass Float-Level Sight Windows • Integral Hi-Flow Choke Housing • Electric Choke Included • Dual-feed Inlet • Vacuum Secondary Operation • Power Valve Backfire Protection • “Quik Release” Non-Stick Gaskets • Vacuum Fittings • Most common tuning parts interchange from other manufacturers (jets, power valves, gaskets, etc.)

• Quick-change Vacuum-Secondary Spring Cover Traditional casting methods can produce unwanted ridge lines which obstruct airflow.

Demon carburetors employ a new die-casting technology, which provides the most accurate, repeatable method of producing concentric venturii without misalignment or shift.

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

SPeed demon™ carburetorS

DEsIgnED FOR stOCK anD MILD PERFORManCE aPPLICatIOns WItH 283-390 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

1282020

650 Speed Demon - Mechanical Sec. w/Annular Boosters 650 Speed Demon - Vacuum Secondary w/Annular Boosters

1282020VE

DEsIgnED FOR MILD PERFORManCE aPPLICatIOns WItH 302-427 CID V8 EngInEs

PaRt#

DEsCRIPtIOn

1282010 1282010VE

650 Speed Demon - Mechanical Sec. 650 Speed Demon - Vacuum Secondary

DEsIgnED FOR 393 tO 477 CID EngInEs & MILD 427 tO 455 CID EngInEs

PaRt#

DEsCRIPtIOn

1402010 1402010VE

750 Speed Demon - Mechanical Sec. 750 Speed Demon - Vacuum Secondary

DEsIgnED FOR 393 tO 477 CID EngInEs & MILD 427 tO 455 CID EngInEs

PaRt#

DEsCRIPtIOn

1402020

1402020VE

750 Speed Demon - Mechanical Sec. w/Annular Boosters 750 Speed Demon - Vacuum Secondary w/Annular Boosters

DEsIgnED FOR 480 tO 540 BIg BLOCK “CRatE� MOtORs

PaRt#

DEsCRIPtIOn

1563010 1563010VE

850 Speed Demon - Mechanical Sec. 850 Speed Demon - Vacuum Secondary

Te c h

L i n e :

9

The Speed Demon™ series is the most formidable performance street carburetor available today. It features the most advanced design that provides street enthusiasts with racing carburetor technology in a very driveable package. The Speed Demon line offers VE–series (vacuum secondaries, electric choke) or twin–squirter (mechanical secondaries) designs.

Across the wide range of sizes, from 650 cfm to 850 cfm, the Speed Demons deliver balanced, high–velocity airflow and exceptional fuel metering capacity to match the fuel requirements of most street engines. Each Speed Demon model comes with Ford kickdown linkage. A Speed Demon carburetor is ideal for muscle cars, stock rebuilds, tow vehicles, mild performance applications and crate motors. They are designed for engines with cam profiles between 220 and 240 degrees duration at 0.050�. Demon annular booster carburetors provide improved signal, improved atomization and better throttle response on engines with lower air speeds in the low to mid RPM range.

These Speed Demon carburetors provide race–tuning in the industry’s most advanced choke horn–equipped carburetor.

FEatuREs • Billet Baseplate with Idle-Eze™ • Billet Metering Blocks • Four-Corner Idle Circuitry • Large Capacity Float Bowls • Large Glass Float-Level Sight Windows • Power Valve Backfire Protection • Integral Hi-Flow Choke Tower Housing • Available in Mechanical or with Vacuum-Secondaries • Quick-change Vacuum-Secondary Spring Cover • “Quik Releaseâ€? Non-Stick Gaskets • Vacuum Fittings • Most common tuning parts interchange

Idle Eze

TM

Idle-Eze™ Idle Speed Tuning System.

Fine-tunes your idle speed by precisely metering additional air into the intake.

Allows smoother transition from off-idle, avoiding potential for stumble.

Valve is easily accessed with a screwdriver through the air cleaner stud hole. Can be fine-tuned after the throttle shaft position has been set.

The walls and contours of the choke tower are smooth and free-flowing, designed to maximize air flow.

2 7 0 - 9 0 1 - 3 3 4 6

10

mightY demon™ carburetorS

The Mighty Demon™ is perhaps the best value for the dollar in the carburetor market today. It is available in a full range of sizes and is ideal for street/strip vehicles. It features billet– aluminum metering blocks, billet aluminum baseplate, large capacity fuel bowls complete with patented sight glasses and patented, streamlined air entries. Some of these features are found only on modified carburetors costing much more. These innovative ideas allow the new Mighty Demons to produce more power and achieve higher levels of performance than conventional designs. Each Mighty Demon model will be available with Ford kickdown linkage. Demon annular booster carburetors provide improved signal, improved atomization and better throttle response on engines with lower air speeds in the low to mid RPM range.

Designed for moderate 289 - 327 & mild 350 - 406 cid engines

PaRt#

DEsCRIPtIOn - (1.280 Venturii)

5282010gC 5282020Bt

650 Mighty Demon - Mechanical Sec. 650 Mighty Demon - Blow Thru w/ Annular Booster

Designed for well-prepared 350 - 406 & mild 427 - 468 cid engines

PaRt#

DEsCRIPtIOn - (1.400 Venturii)

5402010gC 5402020gC

5402020Bt

750 Mighty Demon - Mechanical Sec. 750 Mighty Demon - Mechanical Sec. w/ Annular Booster 750 Mighty Demon - Blow Thru w/ Annular Booster

FEatuREs • Billet Baseplate with Idle-Eze™ • Billet Metering Blocks • Patented Concentric Venturi • No choke horn • Replaceable Air Bleeds • Replaceable Idle feed restrictors • Mechanical Secondaries • Patented Large View Sight windows • Dual inlets • Metering blocks with tunable jets (Primary and Secondary circuits) • 4 Corner idle adjustability • Built-in Power Valve blow out protection • Vacuum ports — 2 constant, 1 ported • Most common tuning parts interchange from other manufacturers (Jets, Power Valves, Squirters, etc.)

Hi RPM 380 to 400 CID, well-prepared 396 to 427 CID and moderate 430 to 468 CID. small blocks above 8,500 RPM

PaRt#

DEsCRIPtIOn - (1.425 Venturii)

5423010gC

825 Mighty Demon - Mechanical Sec.

Designed for well-prepared 440 - 509 cid engines

PaRt#

DEsCRIPtIOn - (1.562 Venturii)

5563010gC 5563020gC

5563020Bt

850 Mighty Demon - Mechanical Sec. 850 Mighty Demon - Mechanical Sec. w/ Annular Booster 850 Mighty Demon - Blow Thru w/ Annular Booster

Bt - Blow through Carburetors These carburetors are prepared to operate in conjunction with turbocharged and centrifugally supercharged applications. They are denoted with the suffix “BT� after the part number.

Idle Eze

TM

Idle-Eze™ Idle Speed Tuning System. Fine-tunes your idle speed by precisely metering additional air into the intake.

Allows smoother transition from off-idle, avoiding potential for stumble.

Valve is easily accessed with a screwdriver through the air cleaner stud hole. Can be finetuned after the throttle shaft position has been set.

Unlike cast center sections (bottom left), Demon carburetors employ a new die-casting technology called ConcentraCast.

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

Street demon™ acceSSorieS, tuning & Service PartS

GM Throttle Cable Adapter Lever (bolt-on) Part# 1952

Description Adapter to add large throttle mounting hole to throttle lever. Primarily used with rod style throttle linkage.

Part# 1954

Fast Idle Solenoid Part# 1950

Description Ford Automatic Transmission Kickdown Spring and Perch Kit for Street Demon™ Carburetors

• For use with TH350, TH400, 700R4 and 200-4R transmissions • Transmission cable bracket removes for use with manual transmissions • Bolts on rear carb flange ear • Clear zinc plated for good looks and corrosion protection Part# 1953

Description Throttle and kickdown cable bracket for use with Street Demon Carburetors.

Throttle Cable Bracket

Part# 1958

Description Designed specifically for Street Demon carburetors. Comes with a dual return spring combination that’s perched on a uniquely effective mount. Hardware is all stainless steel.

Billet Detent Bracket Part# 1959

Description Billet detent bracket for 1958 throttle cable bracket.

Adjustable to work with TH350, 700R4 & 200R4.

Te c h

L i n e :

Description Throttle and Cruise Control Stud for Chrysler Applications

TPS Switch

Throttle & Kickdown Cable Bracket FEatuREs

Description Fast idle solenoid for Street Demon carburetors.

Holds RPM up for A/C equipped vehicles

Chrysler Throttle Stud Part# 124007

Ford Automatic Transmission Kickdown Spring & Perch Kit

11

Part# 1951

FEatuREs

• Designed for use with an electronic overdrive transmission such as a 4L60E that requires a throttle position signal • Can be used for data aquisition • Design provides for easy TPS voltage adjustment • Kit comes complete with all necessary hardware for an easy installation

Description TPS switch, billet bracket, connector rod & adapter lever (bolt–on)

Chrome Air Cleaner FEatuREs • 14” diameter • 3” deep filter element • Triple Chrome Plate • Low Profile • Two securing studs are supplied: 1/4” x 20 tpi (Street Demon) and 5/16” x 18 tpi (all other Demons) • Tri-lobe wing nut is counter-bored and furnished with 1/4” and 5/16” internal threads • Base is specifically designed to clear the choke linkage on all Demon carburetors.

Part# 786004

Description 14” Chrome Air Cleaner

Primary Jets Part# Description 1934 Primary Jet - 82 1935 Primary Jet - 80 1936 Primary Jet - 78 1946 Primary Jet - 74 1947 Primary Jet - 76 1948 Primary Jet - 87 1955 Primary Jet - 91 nOtE: Secondary Jets can be found on page 16

2 7 0 - 9 0 1 - 3 3 4 6

12

Street demon™ carburetor tuning & Service PartS S

Discharge Nozzles

Metering Rod Packs Part# 1938 1940 1941 1942 1943 1944 1945 1956 1957

Calibrate the accelerator pump discharge volume to your particular application by changing the pump nozzle. Use of the hollow screw allows increased fuel flow ensuring the nozzle is the controlling factor in fuel delivery. Sold per pair.

Description Metering Rod pair, .060 x .052 Metering Rod pair, .056 x .048 Metering Rod pair, .058 x .052 Metering Rod pair, .058 x .050 Metering Rod Pair, .060 x .050 Metering Rod Pair, .062 x .054 Metering Rod pair, .064 x .056 Metering Rod pair, .054 x .038 Metering Rod pair, .058 x .044

Nozzle Screw - Hollow Calibrate the accelerator pump discharge volume to your particular application by changing the pump nozzle. Use of the hollow screw allows increased fuel flow ensuring the nozzle is the controlling factor in fuel delivery. Sold per pair.

Part# 120072

Description Nozzle Screw - Hollow

Accelerator Pump Discharge Nozzle Gaskets Part# 190017

Part# 122125 122128 122131 122135 122137 122140 122142 122145 122147 122150 122152

Floats

Part# 1949

Description Accelerator pump discharge nozzle gaskets - 10pk

Description Straight Discharge Nozzles-2pk .025 Straight Discharge Nozzles-2pk .028 Straight Discharge Nozzles-2pk .031 Straight Discharge Nozzles-2pk .035 Straight Discharge Nozzles-2pk .037 Straight Discharge Nozzles-2pk .040 Straight Discharge Nozzles-2pk .042 Straight Discharge Nozzles-2pk .045 Straight Discharge Nozzles-2pk .047 Straight Discharge Nozzles-2pk .050 Straight Discharge Nozzles-2pk .052

Description Nitrophyl® float (Pair) for Street Demon carburetors.

Fuel Inlet Filter Screen

Set-up Spring Assortment Part# 1937

Description Set-up spring assortment for Street Demon™ carburetors

Calibration Kit Street Demon calibration kits feature an assortment of metering rods, jets and step–up springs to fine tune to your application.

Part# 1921 1931

Part# 1929

Description Fuel inlet filter screen for Street Demon carburetors

Accelerator Pump Cup Part# 1928

Description Accelerator pump cup for use with Street Demon Carburetors

Description Calibration Kit - 625 CFM Street Demon Calibration Kit - 750 CFM Street Demon

Contents Primary Jets Secondary Jets Metering Rods Step-­‐Up Springs

Calibration Kit Components 1921 .074, .076, .080, .082 .078, .082 .058/.052, .058/.050, .056/.048, .060/.050, .062/.054, .064/.056 Orange, Yellow, Blue and Silver

1931 .087, .091 .084, .088 .054/.038, .058/.044 Orange, Yellow, Blue and Silver

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

Street demon™ carburetor tuning & Service PartS

Throttle Body Gasket

Accelerator Pump Check Valve

1926

Part# 1930

Description Accelerator pump check valve for use with Street Demon™ carburetors

Accelerator Pump Tube Part# 1939

Part# 1926

1914

Description Throttle body to fuel bowl gasket for 625 CFM Street Demon carburetors.

Throttle body to fuel bowl gasket for 750 CFM Street Demon carburetors.

Mounting Flange Gasket

Description Accelerator Pump transfer tube for Street Demon carburetors

Choke Thermostat Housing Gasket Part# 1924

Part# 1923

1918

Description Choke thermostat housing gasket

Rebuild Kits

Fuel Needle & Seats

Part# 1927

Description Carburetor flange gasket for use with 625 CFM Street Demon carburetors with dual mounting pattern.

Carburetor flange gasket for use with 750 CFM Street Demon carburetors with dual mounting pattern.

Description Inlet needle and seat assembly for Street Demon carburetors. Sold in pairs.

1920

Air Horn Gasket

Part# 1925

Description Air horn to fuel bowl gasket for Street Demon carburetors.

Te c h

L i n e :

Street Demon Rebuild Kits contain all the necessary components for a complete renewal of Street Demon™ carburetors.

Part# Description 1920 R/B Kit - 625 CFM Street Demon 1919 R/B Kit - 750 CFM Street Demon

2 7 0 - 9 0 1 - 3 3 4 6

13

14

modular carburetor acceSSorieS

Chrysler Throttle Stud

Part# 124007

Electric Choke Kit

Description Throttle and Cruise Control Stud for Chrysler Applications

Stud Kit

Part# 160040

Recommended when installing any carburetor to prevent baseplate warping and stripping the intake manifold. Each kit includes high quality washers and hex nuts.

Part# 421440

Description Electric Choke

Manual Choke Kit

Description Standard length, 4 studs

Brass Fuel Inlet Fitting Kit Part# 142117

Description Brass Inlet Fitting Kit Demon inlet fitting (pair) 3/8” tube, Thread 9/16–24 x 5/8–18.

Chrome Fuel Line For use with all small flange–style Demon™ carburetors. Includes inlet adapters, inlet gaskets (2) and fuel pressure gauge port.

Part# 140057

This no hassle electric choke kit is designed to allow you to add or changeover to an electric choke on any Demon Modular Carburetor with a choke tower. It includes all necessary parts and hardware to make the conversion quick & hassle-free for electrically timed fuel enrichment on that cold engine.

Part# 421441

Description Manual Choke

This stay simple manual choke kit is designed to allow you to add or changeover to a hand operated choke on any Demon Modular Carburetor with a choke tower. It includes all necessary parts and hardware to make the conversion quick and stay simple while adding fuel enrichment on that cold engine.

Dual Feed Bowl Fuel Inlet Fittings The 9/16–24 swivels fit Demon and Claw carburetors.

These fittings can be used to connect to fuel logs and other fuel lines with either -6 or -8 AN threads.

140024

Description Chrome fuel line

Braided Stainless Fuel Line Available in braided stainless steel for Demon™ and Claw™ carburetors. These inlet kits make carburetor plumbing simple and neat. Features anodized aluminum fittings, fuel bowl washers and a –6 AN or 3/8” barb inlet.

Part# 140020

Description 9/16” - 24 Dual Feed Line

140026

Part# 140024

140026

Description Dual Feed Bowl Inlet Fitting - 8 AN x 9/16” - 24 with swivel end Dual Feed Bowl Inlet Fitting - 6 AN x 9/16” - 24 with swivel end

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

modular carburetor acceSSorieS, tuning & Service PartS

15

Discharge Nozzles Chrome Air Cleaner FEatuREs • 14” diameter • 3” deep filter element • Triple Chrome Plate • Low Profile • Two securing studs are supplied: 1/4” x 20 tpi (Street Demon) and 5/16” x 18 tpi (all other Demons) • Tri-lobe wing nut is counter-bored and furnished with 1/4” and 5/16” internal threads • Base is specifically designed to clear the choke linkage on all Demon™ carburetors.

Part# 786004

Description 14” Chrome Air Cleaner

Part# 122125 122128 122131 122135 122137 122140 122142 122145 122147 122150 122152

Universal Carb Installation Kit

Description Straight Discharge Nozzles-2pk .025 Straight Discharge Nozzles-2pk .028 Straight Discharge Nozzles-2pk .031 Straight Discharge Nozzles-2pk .035 Straight Discharge Nozzles-2pk .037 Straight Discharge Nozzles-2pk .040 Straight Discharge Nozzles-2pk .042 Straight Discharge Nozzles-2pk .045 Straight Discharge Nozzles-2pk .047 Straight Discharge Nozzles-2pk .050 Straight Discharge Nozzles-2pk .052

Nozzle Screw - Hollow

The Demon universal installation kit contains all the hardware necessary for most installations of a new 4 bbl Demon carburetor including: mounting studs (including an extra long one for securing throttle cable/kickdown cable brackets), washers, nuts, air cleaner stud, vacuum caps, 3 different throttle cable balls, bushing adapter for large hole of throttle lever, air cleaner gasket and base gaskets for square and spread bore carbs including the Street Demon Part# 160049

Calibrate the accelerator pump discharge volume to your particular application by changing the pump nozzle. Use of the hollow screw allows increased fuel flow ensuring the nozzle is the controlling factor in fuel delivery. Sold per pair.

Calibrate the accelerator pump discharge volume to your particular application by changing the pump nozzle. Use of the hollow screw allows increased fuel flow ensuring the nozzle is the controlling factor in fuel delivery. Sold per pair.

Part# 120072

Description Demon Universal Installation Kit

Accelerator Pump Cam Assortment

Vacuum Spring Assortment Complete assortment of 7 different diaphragm springs for vacuum secondary carburetors.

The stiffness of the spring determines when the secondaries open.

Custom tailor accelerator pump timing to your specific engine needs.

Includes 8 cams for 4150 four barrels and 2300 two barrels with 2 screws.

Part# 120077

Description Accelerator Pump Cam Assortment

Te c h

L i n e :

Description Nozzle Screw - Hollow

Part# 120083

Description Vacuum Spring Assortment

2 7 0 - 9 0 1 - 3 3 4 6

16

modular carburetor tuning & Service PartS

Standard Main Metering Jets Quality jets for Demon™, Claw™, Street Demon™ secondary or HOLLEY® carburetors, individually flowed and numbered for easy identification. Available from #50 to #100.

Sold per pair.

PaRt#

DEsCRIPtIOn

PaRt#

DEsCRIPtIOn

230050 230051 230052 230053 230054 230055 230056 230057 230058 230059 230060 230061 230062 230063 230064 230065 230066 230067 230068 230069 230070 230071 230072 230073 230074 230075

Standard Main Metering Jets 2-Pack .050 Standard Main Metering Jets 2-Pack .051 Standard Main Metering Jets 2-Pack .052 Standard Main Metering Jets 2-Pack .053 Standard Main Metering Jets 2-Pack .054 Standard Main Metering Jets 2-Pack .055 Standard Main Metering Jets 2-Pack .056 Standard Main Metering Jets 2-Pack .057 Standard Main Metering Jets 2-Pack .058 Standard Main Metering Jets 2-Pack .059 Standard Main Metering Jets 2-Pack .060 Standard Main Metering Jets 2-Pack .061 Standard Main Metering Jets 2-Pack .062 Standard Main Metering Jets 2-Pack .063 Standard Main Metering Jets 2-Pack .064 Standard Main Metering Jets 2-Pack .065 Standard Main Metering Jets 2-Pack .066 Standard Main Metering Jets 2-Pack .067 Standard Main Metering Jets 2-Pack .068 Standard Main Metering Jets 2-Pack .069 Standard Main Metering Jets 2-Pack .070 Standard Main Metering Jets 2-Pack .071 Standard Main Metering Jets 2-Pack .072 Standard Main Metering Jets 2-Pack .073 Standard Main Metering Jets 2-Pack .074 Standard Main Metering Jets 2-Pack .075

230076 230077 230078 230079 230080 230081 230082 230083 230084 230085 230086 230087 230088 230089 230090 230091 230092 230093 230094 230095 230096 230097 230098 230099 230100

Standard Main Metering Jets 2-Pack .076 Standard Main Metering Jets 2-Pack .077 Standard Main Metering Jets 2-Pack .078 Standard Main Metering Jets 2-Pack .079 Standard Main Metering Jets 2-Pack .080 Standard Main Metering Jets 2-Pack .081 Standard Main Metering Jets 2-Pack .082 Standard Main Metering Jets 2-Pack .083 Standard Main Metering Jets 2-Pack .084 Standard Main Metering Jets 2-Pack .085 Standard Main Metering Jets 2-Pack .086 Standard Main Metering Jets 2-Pack .087 Standard Main Metering Jets 2-Pack .088 Standard Main Metering Jets 2-Pack .089 Standard Main Metering Jets 2-Pack .090 Standard Main Metering Jets 2-Pack .091 Standard Main Metering Jets 2-Pack .092 Standard Main Metering Jets 2-Pack .093 Standard Main Metering Jets 2-Pack .094 Standard Main Metering Jets 2-Pack .095 Standard Main Metering Jets 2-Pack .096 Standard Main Metering Jets 2-Pack .097 Standard Main Metering Jets 2-Pack .098 Standard Main Metering Jets 2-Pack .099 Standard Main Metering Jets 2-Pack .100

Power Valves Proper power valve selection is crucial to carburetor tuning Demon Fuel Systems offers a complete range of quality power valves to accommodate every tuning requirement. Our power valves are rated in inches of mercury (amount of vacuum) required to open the valve. Most 4150/4160/2300 model carburetors use the Standard while 4500 and alcohol carburetors use the Hi–Flow power valve. Power valves should be replaced periodically to prevent leakage. All include gasket.

Part# 240025 240035 240045 240050 240055 240065 240075 240085 240095

Description Std. Power Valve - 2.5 Std. Power Valve - 3.5 Std. Power Valve - 4.5 Std. Power Valve - 5.0 Std.Power Valve - 5.5 Std. Power Valve - 6.5 Std. Power Valve - 7.5 Std. Power Valve - 8.5 Std. Power Valve - 9.5

Part# 240125 240135 240145 240155 240165 240200

Description High Flow Power Valve - 2.5 High Flow Power Valve - 3.5 High Flow Power Valve - 4.5 High Flow Power Valve - 5.5 High Flow Power Valve - 6.5 Power Valve Block Off Plug

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

modular carburetor tuning & Service PartS

Float Bowl Screws

Accelerator Pump Diaphragms

Part# 421386 Part# 190015 190016

17

Description 30cc Accelerator Pump Diaphragms - 2pk.

50cc Accelerator Pump Diaphragm

Accelerator Pump Discharge Nozzle Gaskets

Description Demon™ Float Bowl Screws - 4pk.

Brass Float - center pivot

Part# 120070

Description Replacement floats for center pivot bowls available in brass.

Nitrophyl® Float - center pivot Part# 190017

Description Accelerator pump discharge nozzle gaskets - 10pk

Part# 120071

Fuel Bowl Screw Gaskets

Description Replacement floats for center pivot bowls available in Nitrophyl®.

1:1 Secondary Link

Part# 190024

Description Fuel Bowl screw gaskets - 30pk.

Part# 120098

Description Speed/Mighty Demon - 1:1 Secondary Link

All trademarks are property of their respective owners.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

18

modular carburetor tuning & Service PartS

Primary Fuel Bowl Fuel Needle & Seats 120006

Part# 120005 120006 120013 120014 120090

Description Stainless Needle & Seat - .150” Viton® Needle & Seat - .110” Viton® Needle & Seat - .130” Spring Loaded Needle & Seat - .110” Needle & Seat Lock Nut and Screw

Secondary Fuel Bowl (Vacuum Secondary Carbs)

Part# 421360

Description Race, Speed, Mighty & Road Demon™ Primary Fuel Bowl

Throttle Body Gaskets

120011 Part# 421362

Description Race, Speed & Road Demon™ - Vacuum Secondary

Secondary Fuel Bowl (Mechanical Secondary Carbs)

Part# 120010 120011 120012

Description Throttle Body Gskt. 600 4BL - pr.

Throttle Body Gskt. 650/800 - pr.

Throttle Body Gskt. 830/950 - pr.

Open Base Gaskets

200035 Part# 421361

Description Race, Speed & Mighty Demon™ - Mechanical Secondary

Part# 200035 200037

Description 4150 Open Base Gasket - 10pk 4500 Open Base Gasket - 10pk

All trademarks are property of their respective owners.

w w w . d e m o n c a r b s . c o m

modular carburetor tuning & Service PartS

Metering Block Gaskets

Non-Stick Fuel Bowl Gaskets

190031

Part# 190030

Description Non-Stick Fuel Bowl Gaskets (Red) - 5pk

Part# 190031 190032

Description Met. Block Gaskets 2 Cir Non-Stick 5pk Met. Block Gaskets 3 Cir Non-Stick 5pk

Rebuild Kits Demon Master Kits contain all the necessary components for a complete renewal of most performance model Demon™, Claw™ and HOLLEY® carburetors.

Every kit covers virtually every carburetor in the listed “family”. Each series kit is available with red non–stick fuel bowl, metering block and fuel bowl screw gaskets.

Part# 190000 190004 190003

Description R/B Kit Gas Road Demon Jr. R/B Kit - Gas 4 BL Mechanical Secondary Demon R/B Kit - Vacuum Secondary Demon

190000

All trademarks are property of their respective owners.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

19

20

merchandiSing

Demon™ Carburetion Cap Black twill with flat embroidered Demon logo on front, red sandwich bill & backstrap with woven label of the Demon website.

Part# 180000

Description Demon Carburetion cap

Demon™ Carburetion T-Shirt Famed artist George Trosley let Krass and Bernie out of their monthly role in Car Craft Magazine to take our Dodge Demon out for a spin in this way cool t–shirt! They say it best whey they say “Supernatural Performance...Wicked Good Looks!”

Part# 180002 180003 180004 180005 180006 180007

Description Demon Carburetion T-shirt - Small Demon Carburetion T-shirt - Medium Demon Carburetion T-shirt - Large Demon Carburetion T-shirt - X-Large Demon Carburetion T-shirt - XX-Large Demon Carburetion T-shirt - XXX-Large

Demon™ Carburetion Banner Use this awesome Demon carburetion vinyl banner to show that you use the best! Features the Demon logo with rip graphics, and is designed with 6 grommets and full four–side stitched hems for strength. (measures 24” by 72”).

Part# 180001

Description Demon Carburetion Banner

w w w . d e m o n c a r b s . c o m

DEMON™ FUEL SYSTEMS LIMITED WARRANTY - NO OTHER WARRANTIES APPLYDemon™ Fuel Systems warrants its new performance products to be free from defects in material and workmanship

Demon Fuel Systems set a new standard for performance and looks when we launched our famous

for a period of 90 days from date of purchase.

Demon carburetors over a decade ago. They offer classic modular carburetor performance plus

Demon™ Fuel Systems Limited Warranty specifically does not apply to products which have been (a) modified or

modern looks. Killer features and wide array of styles to choose from means there is no reason to

altered in any way; (b) subjected to adverse conditions such as misuse, neglect, accident, improper installation or

look anywhere else for performance carburetors. Check out our Mighty Demon™, Speed Demon™, Road Demons™and the all new Street Demon™ carburetors today!

adjustment, dirt or other contaminants, water, corrosion or faulty repair; or (c) used in other than those applications recommended by Demon™ Fuel Systems. Demon™ Fuel Systems also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current Demon™ Fuel Systems catalog.

This Limited Warranty is extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties which extend beyond those stated herein. Demon™ Fuel Systems offers no other warranties, express or implied beyond this Limited Warranty.

In the event of an alleged defect in material or workmanship, Demon™ Fuel Systems’ responsibility is strictly limited to repair or replace the defective product. Demon™ Fuel Systems has no other obligation express or implied. Final warranty determination will be in the sole discretion of Demon™ Fuel Systems. Demon™ Fuel Systems shall not be responsible for: (a) actual or alleged labor, transportation or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Demon™ Fuel Systems.

To initiate the warranty process: Return the alleged defective product to the original place of purchase with dated purchase receipt. Warranty claims will be rejected if the consumer cannot establish date of purchase. Unless the product was purchased directly from Demon™ Fuel Systems, do not send directly to Demon™ Fuel Systems. Demon™ Fuel Systems assumes no responsibility for unauthorized products sent directly to Demon™ Fuel Systems. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.

Te c h

L i n e :

2 7 0 - 9 0 1 - 3 3 4 6

Race Demon™ Carburetors

Demon 98 Carburetors

Mighty Demon™ E-85 & Blow-thru calibrations

King Demon™ Carburetors

SixShooter™ Induction Systems

P/N L30979 Printed in USA © Demon Fuel Systems Inc. 2013 Bowling Green, KY 42101 | Phone: 270-901-3346 www.demoncarbs.com