APO COLOR & WEIGHT® Automatic colorimeter & statistical scale
The APO COLOR & WEIGHT® has been designed by Apollinaire Ltd. It is an automatic colorimeter + laboratory scale for varied products
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info
APO COLOR & WEIGHT® Automatic colorimeter & statistical scale
Congratulations for having acquired an APO COLOR & WEIGHT® ! Your box contains: - The device itself composed by the Touchscreen console, and the sensor - The software backup (On a CD) - The manual - A certificate of conformity - The adaptor for small pieces - A charger - A CD for operating system recovery - A stilet - 2 batteries : one of 6000 mAh and one of 3000 mAh The APO COLOR & WEIGHT ® has been completely designed and assembled in France. The electronic card has been manufactured through a highly robotized process. The APO COLOR & WEIGHT ® is not waterproof ! It is a precision instrument, avoid falls and shocks The APO COLOR & WEIGHT ® is guaranteed 2 years from the date of shipment -
Resolution :
-
-
+/- 1 gram for the 1000 grams version 1/256 color level
Precision : +/- 1 gram for the 1000 grams version 1/256 color level Time of load : 2 hours for an autonomy of 4 hours (Normal use) Li-Ion polymer battery by Cameron Sino : 6000 mAh 7.2 V Touchscreen console by Archos Working under Windows 7 starter (The software starts immediately when turning on, and registers parameters automatically when turning off the device – You don’t have to use Windows interface…) 1 GB Ram 32 GB hard disk Intel inside
UNIT MEASUREMENT : -
Switch on your instrument Place your products on the sensor one after each other – The weight and colour are registered automatically The principle is that the weight stabilization is detected. As soon as it happens, a photo is taken and analysed. The weight is displayed
-
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info
APO COLOR & WEIGHT® Automatic colorimeter & statistical scale CHECK FOCUS FUNCTION : Place a first piece on the camera, and then press on “Check focus” – The picture coming from the camera is displayed during 4 seconds, and you can adjust the focus by using the blue wheel on the camera
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info
APO COLOR & WEIGHT® Automatic colorimeter & statistical scale
BATCH MEASUREMENT :
1) Enter the name of the batch to be measured in the field « BATCH » 2) Avoid accents, “, /, *, ., : +- in the name of the batch, but you can put the date inside this name for example 3) Enter complementary information in the field « PIECE» if necessary 4) « START» appears :
5) Click on « START » - « END » appears, and « START » disappears
6) Make the measurements placing the pieces one after each other during a few seconds.
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info
APO COLOR & WEIGHT® Automatic colorimeter & statistical scale 7) The data is registered when the weight goes down the trigger TH defined by user in the field “TRIGGER TH” 8) In order to remove a data from the table, select corresponding line, and click on “Delete selection” 9) The batch is registered when you press on “END”
10) When the batch is finished, click on « END » - the button disappears 11) You can start a new batch by entering a new batch name -
The last line of the table corresponds to the average of each column The number of measurements is displayed as well, it is named “Compteur”
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info
APO COLOR & WEIGHT® Automatic colorimeter & statistical scale ACCESS TO BATCHES : Just press the button “ACCESS TO BATCHES” in order to access to previous batches data and statistics You can as well delete old batches from this window Close the consultation window, the main window appears
Clicking on a batch, all corresponding data is displayed on the right. The last line corresponds to the average of each column All this data is stored under Excel files in the directory “C:\AGROCOLW”
APOLLINAIRE TECHNOLOGIE Zone Industrielle – 76440 FORGES LES EAUX - FRANCE contact@colorimeter.info - www.colorimeter.info