2018法蘭克福新產品dm

Page 1

ÂŽ

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHT0096

Sliding Ribbed Pulley Puller

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHT0099

Wheek Stud Thread Restoere(HVG)Kit

Universal pulley puller for grooved belt pulleys as found on This tool is designed to correctly align and restore damaged crankshafts, alternators, air conditioning units etc. wheel nut threads.

TATHT8176A001

Glow Plug Removal Set 9pc For removing broken or damaged glow plugs. Removes 8mm and 10mm glow plugs.

TATHT8272

TATHT8235

Pertol Crankshaft Pulley Remover & Installation Tool Kit For Chrysler 1.8/2.0/2.4 Engine Engine Code:1.8: EBD/2.0: ECB, ECC/2.4: ED1, EDZ

TATHT8286

BMW N63/S63/N74 Engine Timing Tool

Mercedes-Benz 651 Timing Chain Guide Tool

BMW N63/S63/N74 engine Use to align the camshaft.

Skip protection when replacing the timing chain and the camshaft sprockets.

TATHT8325

VW Audi 8-cyl. 4.2L 4V Camshaft Adjuster Key Timing Chain Adjusting Wrench for VAG Groups to be used as OEM T40079 1/12

TATHT8332

Timing On Flat Stilo 2.4 Benzina/Alfa Romeo 1.6 ECO 105 HP Petrol engine The timing tool set is for Fiat Stilo 2.4 Benzina and Alfa Romeo 1.6 Eco HP engines..

Website: www.taiwanautotools.com

TATHT0108

Brass Tube Straigthner 5/16".1/4".3/16" TATHT8271

BMW(N20/N51/N52/N52K/N52T/ N55)Valve Spring Remove/Installer A special design tool removes and installs the high tension valve spring that acts on intermediate lever on BMW Valvetronic engine.

TATHT8289

Mercedes Benz M156 M159 Engine Timing Camshaft Tool OEM: 156 589 00 61 00/OEM: 156 589 00 32 00/OEM: 156 589 01 63 00

TATHT8333

Engine Timing Tool For Alfa Remeo 2.0 JTS 165 HP The timing tool set is for 2.0 JTS 165 HP Alfa Romeo engine.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHT8337

Audi 2.0L 4V TFSI Engine Camshaft Spacer Set Used for location of sliding pieces on camshaft. Narrow and wide spacers for locating the AVS spline ends on the camshaft..

TATHT8366

Repair tool For Mercedes-Benz The tool kit contains all the necessary drilling and centering tools. Incl.5 threaded sleeves. M6 x 1 for the torn injector mounting bolts at Mercedes Benz CDi engine.

TATHT8384

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHT8350

Porsche Engine Timing Tool Set

For removing and installing pressure spring on intermediate lever. Application:BMW: N42 & N46

TATHT8367

VW Audi 7 Speed DSG Clutch Installer and Remover This tools designed to install and remove the clutch of gearbox. This kit include the Clutch Puller, Release Bearing Setting Tool, Clutch Press Piece, Support Bridge.

TATHT8385

VW AUDI Camshaft Wrench Model: Audi A6 2011 >, Audi A7 Sportback 2011 >, OEM Code: T40297- to be used as Audi A8 2010 OEM T40079

VW AUDI Camshaft Wrench OEM Code: T40269

TATHT8390

FIAT 1.3D Camshaft Holding Tool OEM Code: 303-1475 / 1.871.008.600 / 0104-B 2/12

TATHT8399

Engine Timing Chain Kit For Jeep Jeep Grand Cherokee CRD 3 Litre EXF VM23D 2011-2015 Material: Alloy Steel.

Website: www.taiwanautotools.com

TATHT8358

VAG VW/Audi 1.8/2.0 TSI/TFSI Engine Timing Tool Set This set includes the original tool T10352 and the new versions T10352/1 and T10352/2. Set of 3 sockets. 3/8" drive, outside diameter 34 mm.

TATHT8372

Opel Spx Kent-Moore Special Tool Fix the crankshaft and the camshaft in the TDC position.

TATHT8387

28PC Glow Plug Thread Repair Tool For VW/AUDI For quick and professional drilling out damaged or tornoff glow plugs without removing the cylinder head.

TATHT8504

Crank Pully Holding Tool For Ford 1.8,2.0,2.3 Duratec

Counter - hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHT8801

Mercedes-Benz M270 Engine Timing Tool Set Applications: 1.6L, V4 engine, A class and B class. OEM Number: 270 589 00 61 00

TATHT8808

BMW N20, N55 Valve Pressure Spring Installer and Remover

Applicable: BMW N20, N26, N55 OEM Number: 117110

TATHT8903

Opel Saab 2l Turbo Engine Tool Set Developed to change the camshaft drive chain on the twin cam chain driven 2.0lt turbo petrol engines found in the Vauxhall and Saab ranges from 2002 to 2012.

TATHT8913

New Genuine Camshaft Holding Tool

Fastening of camshaft pinion,gear oil pump and vibrations damper. OEM NO.: 10172A/T10554 3/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHT8805

BMW S54 Engine Timing Tool Set OEM Number: 119140, 119130, 119170, 117340, 115100, 117160, 112300

TATHT8826

Mercedes Benz M270/M274 1.6 2.0 Engine Timing Tool Set Designed to allow removal and assembly of the camshafts.

TATHT8912

Website: www.taiwanautotools.com

TATHT8806

BMW N20 Engine Timing Tool Set Applicable: BMW N20, N26 engine OEM Number: 83302212831, 83302212830, 83302219548, 119340

TATHT8901

VW AUDI Camshaft Locking Tool Kit Application: Locks camshaft when adjusting timing. OEM Code: T40264

TATHT8913

Setting / Locking Tool Kit RENAULT / VAG Flywheel Locking NISSAN &VAUXHALL / OPEL 1.6/2.0/2.3 DC Material: S45C Steel Renault/Nissan & Vauxhall/Opel 1.6/2.0/2.3 DCi/CDTi Suitable for setting and locking 1.6 & 2.0 & 2.3dCi/CDTi

TATHT8914

BMW Valve Slider Holding Plier(N18) Applicable for BMW MINI N12/N16/N18 PEUGEOT 207.308.EP6 engine. BMW NO.119573

Tool

Locking flywheel on the 1.4 TSI engine. OEM Code: T10044

TATHT8922

BMW MINI Valve Pressure Spring Installer/Remover(N18) For BMW MINI N18 engine. OEM Code: 119570

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


ÂŽ

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHT8927

Timing Pins For RENAULT DCi / NISSAN The kit includes a specially designed crankshaft pulley holding tool designed to be used with a 1/2"Dr.

TATHT8934

Engine Timing Chain Kit For Jeep The product also provides the key tools for Renault dual cam 1.4, 1.6, 2.0, 2.5 and 3.5 liter petrol engines for timing chain replacement.

TATHT8947

Jaguar/Land Rover(V6)3.OL/ (V8)5.OL Petrol Timing Tool OEMNO:303-1437,303-1438,303-1439,303-1440,303-1441,3031443......

TATHT8951

Engine Timing Tool- Opel /Vauxhall 2.0CDTi timing belt tool kit for OPEL/vauxhall for removal and replacement of the camshaft drive belt.. the kit also contains the tool required lock the Flywheel on vehicles fitted with Automatic Transmission.. 4/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHT8930

BMW Crankshaft Oil Seal Combination Kit N40/N42/N45/N45T/N46/N46T/ N52/N53/N54/N55

Use for removing and installing the front & rear oil seal of the crankshaft.

TATHT8939

Setting/Locking Tool Kit 1.0 ECOBOOST 3 Cylinder Petrol Engine A comprehensive locking kit for the Vauxhall/Opel 1.6 SIDI petrol engine. The kit provides the essential tools required for camshaft drive chain replacementand setting the engine timing.

TATHT8947-8292

Jaguar/Land Rover(V6)3.0L/ (V8)5.0L Petrol Timing Tool

The timing tool of the camshaft alignment locks the ring gear.

TATHT8952

Website: www.taiwanautotools.com

TATHT8933

Engine Timing Tool Kit The kit includes a specially designed crankshaft pulley holding tool designed to be used with a 1/2"Dr.

TATHT8946

Timing Chain Elongation Testing Gaugevag1.2/1.4 Tfsi Chain Drive Timing chain wear measuring kit for the latest VAG 1.2/1.4 TFSi chain drive petrol engines.

TATHT8950

Crankshaft Locking Pin-Ford To secure the crankshaft via the flywheel, designed to lockthe crankshaft via the flywheen in its "timed" position when replacing the camshaft drive chain or for checking the engine timing.

TATHT8953

Engine Timing Chain Tool Kit

Engine Timing Tool Kit

Opel/Vauxhall2.0CDTi timing chain cylinder head tool. Additional tools are requiredto lock the camshaft sprocket and crankshaft sprocket; OEM NO.: EN-51415 EN-51418

For the 2001 to 2015 6 and 8 cylinder FSI petrol engines found across the VAG range plus the Porsche Cayenne.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHT8955

Engine Timing Tool- Opel / Vauxhall 2.0CDTi timing belt tool kit for OPEL/vauxhall for removal and replacement of the camshaft drive belt.

TATHT9243

BMW N20 N26 N55 Fixing Tool OEM Code Ref.: 114 450 Application: BMW: N20/N26/N55.

TATHT9249

Actuator Socket 10mm Used for replacement of actuator with position sender for charge pressure actuator.

TATHT9263

Crankshaft Rear Seal Removal Installer Tool - For VW,Audi

Volkswagen:2.5Tdi:BJJ.BJK.BJL.BJM 2.5 BLUE Tdi:CEBA.CEBB.CECA.CECB 5/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHT8956

Website: www.taiwanautotools.com

TATHT8962

VW/AUDI 7 speed dsg clutch installer & remover

Engine Timing Chain ToolVauxhall/Opel 1.0, 1.4 Petrol

The tool is to repair of the clutch unit as well as disassembly / Assembly of the clutch housing.

This Engine Timing Kit provides the essential tools required to check and set the camshaft.

TATHT9245

VW Brake Servo/Pedal Push Rod Disconnect Tool Used for separating push rod of brake survo from brake pedal.OEM Code: T40024

TATHT9253

Seal Installer - Rear Crankshaft Used for replacement of actuator with position sender for charge pressure actuator.

TATHT9265

Rear Axle Nut Socket Mercedes Benz Rear axle nut socket for removing the grooved nut on Mercedes Benz Sprinter 1/2"Dr.

TATHT9248

Lambda Probe Socket For lambda probe on VW Golf 7, Audi A3 since 2013, 1.6 and 2.0 –4 cylinder, common rail, 4v, turbo charger.

TATHT9262

Drive Shaft Nut Remover and Installer Tool-For BMW OEM NO.:335040, 230020, 335050, 335060, 335080 Applicable:BMW RWD and 4WD series.

TATHT9266

Rear Hub Socket - Toyota Land Cruiser Rear hub socket for Toyota Land Cruiser 1/2"Dr.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATFT140704

Fuel Filter Key - Volvo 2.0/2.4 Diesel Special designed to remove and install fuel filter on Volvo diesel engine.

TATFT160911

Fuel Line Disconnect Tool (Cummins / International / engine)

Work on low pressure lines around the engine&chassis.

TATFT17503

FORD / PEUGEOT / CITROEN Plastic Oil Drain Plug Suitable for FORD 2.0 TDCi Suitable for PSA 2.0 Hdi

TATFT17511

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATFT140707

DCT Clutch Installation and Removal Tool (Volvo / Ford / Chrysler / Dodge) For 6 speed DCT - dual clutch transmission (Getrag 6DCT450 / MPS6) on Volvo, Ford, Chrysler, Dodge.

TATFT17206

Oil Filter Wrench (Hyundai kia)

TATFT15405Z

Connector and Terminal Removal Tool Kit (VAG) These tools are designed specifically for removeing connectors and releasing terminals of the VGA vehicles.

TATFT17311

Steering Rack Socket ( Lexus /

Feature:The wrench is designed specifically to service Toyota ) Hyundai / Kia vehicles with 2.0L or Assists in the removal and installation of the 2.2L diesel R-engine. Application:Hyundai: Tucson/ix35 steering rack o-ring. Suitable for : Lexus RX330 / RX350 ( 2004 ~ 2009 ) 2009~, Santa Fe/Maxcruz 2012~

TATFT17504AZ

Plastic Oil Drain Plug Tool Set The tool set for plastic oil drain plug on VAG, FORD, PSA, BMW. FORD/PEUGEOT/CITROEN: FORD OEM 1871598 / PSA OEM 9801444780

TATFT17601

Heater Hose Disconnect Tool ( Ford )

Hex Valve Core Tool ( 1/4” )

Disconnects the heater hose fittings on Ford Focus 2.0L (2012 ~ 2016) / Escape 2.0L EcoBoost (2013 ~ 2016) and more.

For torque-controlled tightening with a torque screwdriver / wrench. For low pressure side on conditioning sysytem .

6/12

Website: www.taiwanautotools.com

TATFT17505

BMW Plastic Oil Drain Plug Suitable for BMW N13 - 1.6 / N20 - 1.6, 2.0 / N26 - 2.0 BMW OEM: 11137605018

TATFT17618A

Flexible PDR Line Board ( 600mm ) Great visual aid for PDR (Paintless Dent Repair). Works well for insurance adjusters and taking photos of damage.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


ÂŽ

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATFT17801

Belt Tensioner Tool Mercedes Benz tensioner for hydraulic wedgestrap- tensioning element as OEM W266589003100

TATFT2500D

Wheel Hub Grinder

For cleaning the wheel centering device as well as the attachment area between the wheel and hub..

TATFT687-14

Diesel Injection Line Wrench 14mm For removing and installing the fuel injection li noen diesel engines. Suitable for most diesel engines - HDI (14mm).

TATHBS38H5230

Extra long ball end Hex bit for VAG Drive :3/8"Dr.H5x230L Removing and installing oil sump For VAG Equivalent to OEM 10058 7/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATFT17A03

EGT Sensor Socket Set (Exhaust Gas Temperature) This set of sockets is designed to remove most EGT sensors used on cars,light, medium,and heavyduty trucks.

TATFT400Z3

Fuel Line Disconnect Tool Set ( diesel ) Quick fuel filter replacement. Suitable for VAG, Fiat, Jeep, Opel, Ford, Chrysler and Volvo..

TATFT687-17

Diesel Injection Line Wrench 17mm For removing and installing the fuel injection line on diesel engines. Suitable for most diesel engines- HDI (17mm).

TATPC690B

6pcs Subframe Alignment Pins Used to keep alignment of the sub-frameduring reassembly. Type / model: Audi A3 2013 >, Golf 2013 > Assemblygroup: Running gear

Website: www.taiwanautotools.com

TATFT17A12

Diesel Filter Wrench (Dodge) Special desidned to remove and install the fuel fikter on Ram EcoDiesel. The wrench grabs the four tabs on the outside of fuel filter canister,making removal easier.

TATFT629

Head Bolt Remover-Torque Adapter(Ford 6.0L Power Stroke Diesel) Use for 3/4" Dr. ratchet/torque wrench transmits the high torque necessary to loosen and tighten head bolts.

TATHBS14H480

VW Audi OEM Tool T10370 Engine Crankshaft Speed Sensor (G28) Socket Drive :1/4"Dr.H4x80L 4-cyl. Injection engine For removing and installing engine speed senser G28

TATPC846

Universal Ratcheting Punch Perfect Holes Into Bumpers The Press-it hole puncher kit is designed for punching holes into bumpersto mount parking sensors.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATPC875

VAG Vibration Damper Assembly Tool Used for dismantling and assembling the vibration damper on 4-cyl.

TATPC912

Wedges (2 pairs) for releasing diesel fuel filter fittings

Quick filter replacement without irreparably damaging fittings.

TATPC918

Seal Ring Installation Tool DV6 (16V) Applicable to PSA 1.6 16V (DV6) Diesel engines.

TATPC862-8P

8PC Brake Tube Flaring/Bending Tool For SAE and DIN single and double flange. Handy mechanical flaring tool that can be used on the vehicle. 8/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATPC905

11pcs Special Brake Caliper Nut Socket Special for fix brake caliper nut. Applications: Audi, BMW, Ford, Mercedes Benz, Porsche, Volkswagen.

TATPC913

OEM VW Audi T10303 DSG Clutch Retaining Bar On Multiple Clutch Transmissions Clutch Retaining Bar Used for assembly of multiple clutch on direct shift gearbox 02E - 6 speed.

TATPC930

13 pcs Special socket sets The tool set for plastic oil drain plug on VAG, FORD, PSA, BMW. Special for the engine cylinder head nut and brake caliper..

TATPCTD-11P

Tap and Die tool set) 1pc Die holder.1pc Tap holder.1pc Hex key. 3pcs Taps M12x1.5,M12x1.75,M14x1.5 3pcs Dies M12x1.5,M12x1.75,M14x1.5 1pcs Thread gauge

Website: www.taiwanautotools.com

TATPC906

Ratcheting brake caliper pressing tool works on twin and quad piston calipers, as well as single and twin piston floating calipers.

TATPC914

Intake Manifold Release Tool Material: S45C Steel Feature:Used for releasing intake manifolds. injection engine (1.4 direct injection engine, turbocharger). Equivalent to T10527 For VAG

TATPC862-6P

Din&Sae Hand Held Brake Pipe Flaring Tool Kit

Hand held brake pipe flaring tool for use on the vehicle. Includes dies and punches for DIN single and SAE double flares Suitable for 4.75mm and 3/16” pipe diameter’s.

TATPCTS-08

Rear Axle Nut Socket - Mercedes Benz For removing the rear axle grooved nut on twin wheeled Mercedes Benz Sprinter 1/2"Dr.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATPCW187

Wheel Hub Holding Tool Special design for the four and five stud wheel hub. To hold the wheel hub when repair the bearing.

TATZHB0071

Final Drive Propeller Shaft Nut Remover/Installer Set-BMW

Used to remove/install final drive propeller shaft nut.

TATZHB0097

Flywheel Lock Tool-BMW (N55) For locking flywheel with Automatic transmission installed. Applications: BMW N55/N20/N26 OEM Ref.:118660

TATZHF0011

Fuel Injector Puller/Remover SetFORD/VOLO A new special tool is urgently required for the correct removal of the injection nozzles. 9/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATPCW195

1/2”Dr.Oil filter wrench Materia:Cr-Mo Steel Driver:1/2”Dr. 21mm Suitable for MERCEDES-BENZSprinter,VWCrafter.

TATZHB0093

Fuel Injector Remover/InstallerBMW(B36/ B38/ B48)

For removing and installing/replacing all injectors. Applications :BMW (B36/B38/B48) OEM Ref : 2358417 , 23580

TATZHB0107

Balance Shafts Adjusting | for BMW N20 (BGS 9449) For Removing and refitting/replacing balancer shafts (N20) OEM Ref: 2 318 117, 2 212 825

TATZHM0048

Automatic Transmission Oil Assembly Tool Set-Mercedes-BENZ 9G-TRONIC Filling automatic transmission with fluid.automatic transmission with fluid.

Website: www.taiwanautotools.com

TATZHB0012F

Front Crankshaft Seal Remover/ Installer Kit-BMW (N20/N26) For replacing front crankshaft radial seal. Applications: BMW N20 / N26

TATZHB0094

Vacuum Pump Sealing Cover Remover/Installer Set-BMW(N53/N54) For removal and installation of sealing cap of vacuum pump. Applications :BMW (N53/N54) OEM Ref: 118 530 ,110290 ,118650

TATZHCY002A

Timing Chain Holder Wedges-VW Routan 3.6L & Chrysler / Dodge - 3.0L , 3.2L ,3.6L B-AKA 10200 These new Timing Chain Holders are used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on the 3.6 L Engine.

TATZHT0035

Drive Axle Nut Socket (Dr.3/4'',H60,158mm)-MAN TGA Application range: MAN TGA 460 drive axle, V9-82L-01(Disk brake/ABS), etc.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


®

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATCBA1058

Mercedes-Benz (M111/ M112)Crankshaft Pulley Holder Suit for Mercedes-Benz M111.M112 break loose the crank shaft pulley/harmonic balancer bolt..

TATCBL1020

Jaguar/Land Rover Fuel Pump Camshaft Fixing Tool Specially designed to align the fuel pump camshaft on all new range rover.

TATKEM239H

76/15 Oil Fiter Wrench(Metal) For locking flywheel with Automatic transmission installed. Drive profile size, inch 3/8 " Drive profile size, metric 10mm

TATLYWH933AB

DSG Transmission Oil Filling Hose for VAG Fuel Pipe and Ball Valves For VW/AUDI/CVT/DSGDSG 10/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATPCW195

Audi A8 Camshaft Locating Tool Kit Used to locate camshaft when adjusting timing. Applications :1997 - 1999 AUDI A8(V8 4V engine). VW OEM no.ref.: 33413341

TATCT1124A

Ratchet Extension Drive Bar And Low Profile Socket Set

Provided with two square drive adapters in 1/4” and 3/8”. Max torque allowed :71.87 NM / 53 ft lb.

TATZHB0107

Camshaft Adjuster Bit - VAG (LASER 6691) Applications: Volkswagen/Audi 2.0litre TFSi engines Equivalent to OEM T40080 Manufactured from Chrome Vanadium

TATTT355

Petrol & Diesel Engine Compression and Leakage Test Kit This petrol & diesel engine compression and cylinder leakagetest kits that cover the wide range of modern engines,including HDI , TDCi and Pumpe Duse.

Website: www.taiwanautotools.com

TATZHB0012F

VAG High Pressure Pump Tooth Belt Pulley Puller

Used to remove toothed belt pulley. VW OEM no. ref: T10320

TATCT1260G

Professional Oil Filter Wrench Set (13 pcs)

Set for removing oil filter wrenches on most common vehicles on market.

TATLYWH933A

DSG Transmission Oil Filling Hose for VAG Fuel Pipe and Ball Valves With adaptor for 1 liter VAG gear oil (G052182A2) Built-in valve prevents oil spillage For VW/AUDI/CVT/DSG

TATYF62493

Designed for DSG 7 speed dual clutch gearboxes fitted to VAG vehicles. (LASER5164) Assembly lever for use on DSG gear boxes. Suitable for Volkswagen and Audi vehicles. OEM T10407

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


ÂŽ

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATHK5041

Vibro Impact Driver Set Operation with Air Hammer special Designed for Loosen Rusted or Tight Screws Bit Material : S2

TATSF8193

Ford 6.7L fuel injector removal tool Lift Kit facilitates the removal of the fuel injector in the Ford 6.7L Diesel engine.

TATSF8206

Inlet Camshaft Gear Alignment Tool

Modern engines that use gear drives to drive their camshafts, balance shaft etc. often have a sprung loaded split gear in the gear train..

TATJC746

Micro Hose Clamp Tensioner OPERATION RANGE: 5~55mm Micro Hose Clamp can operate in small engine room and jus one clip than keep tension let you take off the hose easily! 11/12

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATHK8029

Crdi High Pressure Fuel Pump Remove Used to remove the high pressure diesel fuel pump OEM No.: 09331-1M100

TATSF8201

Professional Stretch Fit Belt Installation Tool

Specific for V-Ribbed Stretch Belt Installation Tool is used for installing certain V-Ribbed Stretch belts.

TATSF8207

Land Rover.Jaguar Fuel Injector Remover Specially designed to fit the long petrol injectors used on the Jaguar Land Rover models listed equipped with the 5.0lt V8 petrol engines..

TATJC752

Brake Disc Remover Kit Put the nut on the hub to prevent fall down when release!! Range : 170~400 mm

Website: www.taiwanautotools.com

TATHK8047

Oil Filter Socket Specially designed for plastic oil filter cap of TOYOTA , LEXUS . Made of steel , high quality.

TATSF8205

Diesel injector extractor It's easy to use, specifically designed to extract the common rail injectors used on the Jaguar Land Rover 2.7 TDi V6 & 3.6 TDi V8 diesel engines found across the Jaguar and Land Rover ranges.

TATJC706K

Hydraulic Ball-Joint Puller The special design and function for dismounting the ball-joint on passenger cars!! The jaw opening also can be turn to fit ball-joint size!!

TATJC754

Radiator Pressure Test & Refill Kit For use in testing radiators and confirms radiator and cooling system leaks.

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


ÂŽ

TAIWAN AUTO TOOLS TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD.

TATSY225H3

Universal Hose Clamp Plier(Extended) Special angle jaws designed for most kinds of hose clamp. Capacity: 0mm ~ 45mm.

TATSY502H2

Brake Caliper Press Works on various single, dual & quad piston calipers. Centrally distributes force to prevent misalignment of pistons.

TATSY187F

Diesel Filter Wrench For Ford Transit To remove the canister housing, slip the tool over the canister and turn the wrench to the unlock position on the canister.

TATSY146

5F.-3, No.147, Longjiang Rd., Zhongshan Dist., Taipei, Taiwan 10487

TEL +886 2 8712 0039 | FAX +886 2 8712 3016 E-mail: info@taiwanautotools.com

TATSY203K

Slide Hammer Locking Pliers Adjustable Locking pliers with detachable slide hammer. Body shop application: dent pulling using welded pins, minor jack damage to sills, etc. Combined the ability to twist as well as pull.

TATSY502H3

Brake Piston Spreader Set

Gearless brake piston spreader kit with three pairs of spreader pads. Suitable for 1, 2, 4, 6, and 8 multi piston calipers.

TATSY104K

Coil Spring Compressor The tool is designed for use in limited space under wheel arch. Jaws design is fitting to wrap coil claws for safety. Maximum jaw opening is 250mm..

TATRDTOSM403A6-B

Website: www.taiwanautotools.com

TATSY502H

4-In-1 Brake Caliper Press

Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers.

TATSY288G

Timing Pulley Puller(47-110mm) This tool is designed for removing drive pulleys with face grooves. The tool removes a pulley absolutely free of any risk of damage.

TATSYXASN014

Shock Absorber Tool Kit 14PC Specifically designed for repairing and replacing shock absorbers . Manufactured from Chrome Vanadium.

6#6PCE1152

Ford 6.45L Diesel Turbo Arm Puller

1/2DR.*3PC Torsion Stick Set (120L)

ANTI-THEFT SCREW REMOVAL

This tool has been designed to remove the actuator link rod from the arm on the turbo of the 2008 to 2010 6.4L Ford power stroke diesel engine.

TOSSM170804NBR 1/2"Dr.x 17mm,ORANGE 210L,80 Ft-Lbs (110N-m) TOSSS240804NBY 1/2"Dr.x 19mm(3/4"), GREEN 210L,80 Ft-Lbs (110N-m) TOSSM210804NBG 1/2"Dr.x 21mm,PURPLE 210L,80 Ft-Lbs (110N-m)

TOOL SET

12/12

Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our members in this industry, we are one of the leading business partners in this sector.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.