TATFT20C03
TATYF61075A
TATYF61075B
Rear Side-Light RemovalTool- for Tesla Model 3
TheTeslaModel 3rear lamp unit is heldinplacebyalarge10sidedscrew whichalsodoubles as thebootlidbuffer point.
Becauseof thematerial it is manufacturedfrom itcaneasilybedamagedbyuseof incorrect tooling (suchas pliers,etc.).
This special 10sidedplastic socket has beendesignedspecificallyfor thesaferemoval of this fixing,allowing saferemoval of thetail lights.
•Applications:TeslaModel 3.
•Rear tail light top fixing removal tool.
•10sidedsocket.
•Manufacturedfrom non-marring plastic.
•Usewitheither 3/8” drivesocket or 22mm spanner.
STRUT NUT MAGNET SOCKET 13 mm FOR TESLA
• Speciallydesigned for removing and installing the top shock retaining nut.
• The socketis speciallydesigned with a thin-wall diameter and with a magnet inside.
• Convenientuse.
• Size: 3/8″ Dr. x13 mm x63 mm (L).
• Application:Tesla Model 3.
WIPER ANGEL ADJUSTMENT TOOL (TESLAMODEL X&S)
■ Befitting fortesla modelx& s .
■ To check & adjust angelbetween windshield wiper arm and windshield.
■ Fixed adjustment toolatthe front of the wiper arm, adjusting angelwith open-ended wrench (24mm)to suitable angel.
■ Using range:± 20°
■ Suitable specification ofarm:
• LHD & RHD VEHICLE,DRIVER'S SIDE: 1.5 DEGREES +/- 3 DEGREES
• LHD & RHD VEHICLE,PASSENGER'S SIDE: 1.7 DEGREES +/- 3 DEGREES
WIPER ANGEL ADJUSTMENT TOOL (TESLAMODEL 3)
■ Befitting fortesla model3 .
■ To check & adjust angelbetween windshield wiper arm and windshield.
■ Fixed adjustment toolatthe front of the wiper arm, adjusting angelwith open-ended wrench (24mm)to suitable angel.
■ Using range:± 20°
■ Suitable specification ofarm:
• LHD & RHD VEHICLE,DRIVER'S SIDE: 1.5 DEGREES +/- 3 DEGREES
• LHD & RHD VEHICLE,PASSENGER'S SIDE: 1.7 DEGREES +/- 3 DEGREES
10PCS TESLAWHEEL BOLTLOCK SOCKET SET
■ Applicable for installing and removing locks of tesla series.
#80,#81,#82,#83, #84,#85.
TATYF65085
ITEM NO.PHOTOSDESCRIPTION
TATFT21460
■ Contents: #76,#77,#78,#79,
■ This tool enables you to permitservicing of customer vehicles ,even customer has lost the key. TATYF65084
newbrake pads. ■ Include : • 1PC.ROTATING CALIPER WITH 3/8” DR. (RIGHT& LEFTSIDE THREADED ALLOW) • 1PC.BACKING PADS •2PC.ADAPTERS FOR BRAKE ASSEMBLAGE TATCT1294 Radiator Vacuum Coolant Refill Kit for Tesla • Vacuum-type coolant refilltoolhas large internalpassages to allowcoolant to be refilled fast • Provided with two threaded adapters forModelS and X, and Model3 and Y • With onlytwo valves - easyto use, intuitive design • Toolwith a hook can hang under the hood • Toolneeds to work with an air compressor to create a vacuum in the cooling system TATCT1291-26 Test Cap for Tesla Model 3 and Y • Adapter or test cap to be connected on recovery tank filler necks for coolantrefillorpressure tests • Suitable for the cooling system recovery tank on Tesla Model3 and Y 2023 - Jan. TAT NEW ITEMS For TESLA
BRAKE CALIPER PISTON REWIND TOOL KIT FOR TESLAREAR BRAKE ■ This toolsetdesigned fortesla rearbrake caliper piston rewind. ■ Supplied with both left and right-handed winders enabling the return of the brake piston into the caliperdelivering clearance for the
•
•
•
•
•
•
•
•
•Suitablefor - Audi A4,A6
- BMW 3Series E46,X3E83, X6E71,E72, Z3E36
- CitroenBerlingo,C8,Dispatch
- FiatBravo,Croma, Punto, Scudo,Ulysse
- FordGalaxy, Maverick, Mondeo
- Hyundai Getz, SantaFe
- Mercedes-Benz A-Class W169,W176, B-Class W245
- NissanCube,Leaf,Micra,Murano, Versa
- Opel AstraG/H/J, CorsaB/C,Insignia,ZafiraA/B
- Peugeot 207,807,5008
- Renault Clio, Espace,Laguna,Thalia
- TeslaModel 3
- VolvoC70,S80, V60,V70, XC60, XC70
ITEM NO. PHOTOS DESCRIPTION 2023 - Jan. TAT NEW ITEMS For TESLA TATCT1209T Brake Pressure Bleeder Adapter Set for Tesla AllModels
Kit speciallydesigned forperforming power brake bleeding on Tesla vehicles
Tesla
Adapters for
ModelS and X, Tesla Model3 and Y
30 psi
Suitable for working pressure up to 2.0 bar /
with mostbrake pressure bleeder machines or tank pumps
Internal Coil SpringCompressor Ø75 - 155 mm
Compatible
TATCT1001T
Suitablefor coil springs withinternal diameter > Ø 75mm andexternal diameter < Ø 155mm
Special pins ontool bodytomeshwithgrooves ondiscs tocreateasecureconnection (seeillustrationontheright)
operatedwithanair/impact wrench
Canbe
withproduct liablityinsurance
Provided
TATHT8864
TATZHP0014A
TATZHB0119
TATZHB0120A
TATZHP0015
TATZHP0016
TATFT20905
FordEngine TimingKit For 1.5L 3 Cylinder EcoBoost
This kitis a 3 cylinderengine with chain driven camshafts. This timing kitis used fortiming chain replacementand engine rebuilds.
OEMNO.: 303-1643,303-1649 and 303-1645.
Application: 1.5 L EcoBoostPetrolYZJA, Y2DA,Y1DA and YZDA. Ford Focus EcoBoost 2018 and newer
Ford Focus ST EcoBoost 2018 and newer
Fiesta Duratec 2018 and newer
Ford Kuga 1.5L EcoBoost(I3) 2019 and newer
CAMSHAFT TIMING TOOL SET - PORSCHE 996,997
Used to set camshaft timing.
Application: Porsche 996420, 997
911 BJ 98996 Turbo BJ 01-05
997 TT, GT2 BJ 07 - 09
OEM Ref: 9661 (Adjusting device), 9661/1 (Holding keys - 4pcs),9401
Vibration Damper FlywheelRemover and Installer For
For securing flywheelwhen releasing and tightening down screwconnection ofvibration damper.
Equivalentto BMW OEMNO. :0496595 (116130).
Application:BeamerB37D, B38B, B47D, B48B,B57,B58
BMWCOUNTERBALANCE SHAFT ALIGNMENT
Engine codes:B38A12A | B38B15A | B38K15A, 1.5L Diesel: B37D15A | B37C15A
BMW
TOOL B37 |B38 (PAT.PEN.)
Applications:1 series:F20 / F21 | 2 series:F22 / F23 / F45 / F46 | 3 series: F30 / F31 | i8: I12 | X1: F48
OEMEquiv: 2358646 | 2288942 | 2288943
INLET CAMSHAFT SPROCKET HOLDING TOOL (PORSCHE 996 997 F6 3.6L TURBO)
Holdsinletcamshaftsprocketduringtimingservice.
Porsche:911(996)3,6Turbo4/3,6Turbo4S/3,6GT2 OEM9653/00072196530
Exhaust Camshaft Sprocket Holder (PORSCHE 996 997 F6 3.6L TURBO)
Holdsexhaustcamshaftsprocketduringtimingservice.
Exhaustcamshaftlocking/turningtoolsuchasPorsche9653/1(00072196531)
TobeusedonPorsche911(996)3.6Turbo4/3.6Turbo4S/3.6GT2
Rear Drive Motor Coolant Reservoir Removal Socket - for Audi
Specially designed cup socketused to remove and refitthe coolant leakage container(expansion tank) withoutcausing damage to the rear drive motor on the Audie-tron,atthe required service intervals recommended by the vehicle manufacturer.
Specially designed to fit the coolant leakage containerfound on the rearfinaldrive of the Audie-tron (from 2019).
Equivalentto OEMT40409.
Designed to fit leakage container OEM0EF901257C.
Flutes:12; 60mm diameter. Use with 27mm single hex socket
Manufactured from non conducting nylon composite to help prevent damage to the vehicle component. TATFT20B03
BatteryConnector Release Tool - for VWGroup EV
This release toolhas been specificallydesigned for use on the Porsche Taycan and AudiE-Tron GTto release the communications connector on the battery module ofthe HV battery,withoutcausing anydamage to either the connector or the surrounding components.
Designed to release the communications connector on the batterymodule of the HV battery.
Applications include: Porsche Taycan (from 2020),AudiE-Tron GT (from 2021).
Equivalentto OEMT90027.
Manufactured from hard durable non-damaging plastic.
ITEMNO.PHOTOSDESCRIPTION
TATFT22306
MERCEDES BENZ CLS
WheelSpanner A0005810000 OEM Compatibility: X222
A217 C205 C217 C218 C253 *22 mm Driver * 2023 - Jan. NEW ITEMS
MERCEDES BENZWHEEL SPANNER WRENCH
C218
A205
TATFT20C12A
(TATPC1034)
TATFT20C12B (TATPC1035)
TATFT21408
2023 - Jan. NEW ITEMS
BRAKE LININGTHICKNESS GAUGE 9PC for HGV
A 9 blade brake wear gauge suitable foruse on HGVs to check the measurement of (or demonstrate) the thickness of the remaining brake pad material.
The offsetdesign allows for the blades to be inserted between the brake disc and the brake pad backing plate allowing the pad thickness can be measured withoutneeding to be removed from the vehicle.
ManyOEMbrake manufacturers forHGV's recommend pad replacementataround 5mm. The toolhas been designed to allowa definitive reporton remaining pad thickness to be made so recommendation can be made to the vehicle owner.
Brake pad thickness gauge setforinspecting wear on brake linings.
Fits between the disc & brake pad backing plate. 9 blades convenientlymarked in both metric & imperialunits. Range: 6 - 22mm (0.2362" - 0.8661").
ADAS Park Assist Camera Positioner - for Volvo
This ADAS (Advanced DriverAssistance System) positionertoolhas been designed to ensure the correct position ofthe front facing parking assistance camera on Volvo XC90, XC60, XC40, S90, S60, V90 and V60 models as part of the calibration process.
Used to position the PAC (Parking Assistance Camera) during calibration.
Applications include: XC90-II,XC60-II,XC40,S90-II, S60-III, V90-II and V60-II.
Equivalentto OEM999 7529. Use in accordance with OEMinstructions. Simplyclips on to frontfacing parking assistance camera mounting plate behind the rear view mirror. Manufactured from aluminium with an acrylic spirit level.
ADAS Radar Angle SettingTool- for Volvo
This ADAS (Advanced DriverAssistance Systems) angle setting toolhas been designed to ensure the correctposition of the front facing radar sensor on Volvo XC60, S80, S60,V70,and V60 models as partof the calibration process.
Used to position the front facing radar sensor during calibration.
Applications include: S60/V60 (2010-2018), S80/V70 (2007-2016), XC60 (2008-2017).
Equivalentto OEM9997407.Use in accordance with OEMinstructions to setup the front radar unit.
Clips onto the radar mounting plate behind the frontgrill. Manufactured from aluminium,with an acrylic spirit level.
Rear HubNut Socket (RAM)
Servicetherearaxlebearingadjustingnut onheavydutyRAMtrucksfrom2019. Chassis68454732AA
2019(D2,DD,DP)-System(3-DifferentialandDriveline) RAM3500/4500/5500Pickupcabchassis OEMRef.2066600030
NEWDSG Clutch ToolSet (VAG)
For theprofessional disassembly/ assemblyof DSGclutches onVAGvehicles.
T10373AClutchPuller - Thepuller is usedtoremovethedual clutch.
T10376ClutchPress Piece- Usedfor installing clutch.
T10323Support Bridge- Usedtodisassembleandassembletheclutchhousing.
T10466ClutchBearings Gauge- Usedfor adjusting thepositionof clutchengagement bearings "K1" and"K2".
T10374ReleaseBearing Setting Tool - Usedfor determining positionof releasebearings "K1" and"K2".
T10407Mechatronic AssemblyLever - Operatetheengaging lever whendismounting /mounting of mechatronic unit.
T10406Mechatronic GuideBolt- Guidethemechatronic component whenmounting of mechatronic unit.
T10303ClutchRetaining Bar - Usedfor assemblyof multipleclutchondirect shift.
T10302ClutchCover PlateGuideSleeve- Usedfor assemblyof clutchcover plateondirect shift.
Application:
VW/Audi / Skoda/Seat from 2004
VW - Golf, Golf Plus, Eos, Jetta,Passat, Polo, Scirocco, Touran
Audi - A3
Seat - Fabia,Octavia, Roomster, Superb,Yeti
Skoda- Altea, AlteaXL,Ibiza,Leon, Toldeo
DSG7-speed(Code0AM) until 2011/05
DSG7-speed(Code0AM) from 2011/06
DSG7-speed(CodeOCW) S-tronic
DSG6-speedwet (Code02E)
6-speedmanual gearbox (Code08D)
6-speedmanual gearbox ( Code0A6) TATFT22309
Fuel Filter Water Sensor Crowfoot Wrench (Isuzu)
3/8" drive for the removaland installation ofthe fuelfilter water sensor withoutdamage.
Slot machined at end ofwrench to allowtoolto bypass wire harness.
Suitable forIsuzu NPR dieseltrucks (2011 ~ 2018 ).
Crankshaft Sprocket AssemblyToolSet (VAG)
A combination oftwo bearings to supportaxialloads in both directions.
Suitable forVAG 1.2 TSI /TFSI petrolengine.( CBZA/CBZB/CBZC)
Crankshaft Sprocket Tool- Removing /installing the timing sprocket.
Crankshaft SealInstaller - Pressing the sealinto the timing cover.
FlywheelLocking Tool- Holding the crankshaftin position.
TATFT21B03
VW - GolfVI(5K,AJ,517),GolfPLUS (5M,521),Polo V ( 6R, 6C ) ,Jetta VI (162, 163,AV) ,Caddy III(2K,2C) ,Beetle (5C) ,Touran (1T)
Audi- A1 (8X),A3 (8P)
Seat - Altea (5P) ,Leon (1P),Ibiza IV (6J, 6P) ,Toledo IV (KG)
Skoda - Fabia II (542, 545),Octavia II (1Z) ,Rapid (NH1, NH3) Roomster (5J) ,Yeti(5L)
OEMNO. T30122, T10417, T10311, T10161
ITEMNO.PHOTOSDESCRIPTION
TATFT156P3
TATFT15109AZ
TATFT20C01Z
TATSF5091
TATSF9012E
TATSF9151
TATSF7208A
TATSF9131A
TATZHFA003
TATCL100KMI
TATCL100KMO
2023 - Jan. NEW ITEMS
DESCRIPTION
DieselInjector Puller (M9R)
Used to remove seized or corroded dieselinjectors.
1.Installthe adapterto the dieselInjector.
2.Screwthe support rod into the cylinder head.
3.Installthe supportplate, nut/bearing assemblyto the adapter& rod.
4. Tighten the nut to remove the dieselinjector from the cylinder head.
Adapter(M14 x1.5 - Female) forM9R 780 / 782 / 784 Piezo injector
Adapter(M17 x1.0 - Male) for M9R 630/692/786/788 Solenoid valve injector
Adjustable Removal Tool Windshield Puller Remover Tool For BMW
Specially designed to remove BMW serialmodels windshield wiper arm.
Supportarms are adjustable to fit variety of automobiles.
Applicable: E12, E21,E23,E24,E28,E30, E31,E32,E34,E36,E38, E39, E46,E52, E53, E60,E65,E66,E67,E85, PR1,etc.
SCANIARear WheelHubInner Bearing Extractor
This toolis designed to extract SCANIA rear wheelhub innerbearing. With this tool, you can remove the bearing quicklyand easily.
Applicable: SCANIA truck
Bearing part No.:218248
TRUCK FRONTWHEEL BEARING REMOVER SET (UNIVERSAL)
Used to remove the truck frontwheelbearing. Changeable bearing puller can be used on most ofcar models.
SHEPPARD M100 PITMAN ARM PULLER
Easilyand safelyremoves difficultorseized pitman arms from M100 steering gears ofclass 6-8 vehicles
Rated for use with up to a 3/4" drive impactfor faster removal Constructed of high-strength materials forincreased pulling power
S-Cam Brake Slack Adjuster Tool It's enables you to quicklycheck the brake adjustment on class 7 or 8 trucks and trailers equipped with S-cam brakes. This toolfeatures a sturdyfour-position handle to provide the leverage you need atthe proper angle,works on manualor automatic slack adjusters.
(KM12) - 80mm
9-piece Special Socket Set withOuter Teeth for Locknuts
● For gentle removing and installing Din 981 KMLocknut
● 1/2’’ drive,length 60 mm
● 3/4’’ drive,length 68 mm 1/2" Dr.
TATCL100KMI-04 (KM04) -32mm ,TATCL100KMI-05 (KM05) - 38mm
TATCL100KMI-06 (KM06) -45mm ,TATCL100KMI-07 (KM07) - 52mm
TATCL100KMI-08 (KM08) -58mm
3/4" Dr.
TATCL100KMI-09 (KM09) -65mm ,TATCL100KMI-10 (KM10) - 70mm
TATCL100KMI-11 (KM11) -75mm ,TATCL100KMI-12 (KM12) - 80mm
ITEM NO. PHOTOS
MultiAir
◎ For tensioning the spring plates of the Uniair and Multiair
◎ Suitable for Fiat
MultiAir belt driven engines and Alfa Romeo. ◎ OEM:
◎ Engine
Actuator Tool (FIAT)
Modules.
1.4L
2000034500
Codes:955 A6.000, 955 A2.000, 198 A7.000, 955 A7.000,955 A8.000,940 A2.000
9-piece Special Socket Set withInside Teethfor Locknuts ● For gentle removing and installing Din
KMLocknut ● 1/2’’
●
,
981
drive,length 60 mm
3/4’’ drive,length 68 mm 1/2" Dr. TATCL100KMI-04 (KM04) -32mm
TATCL100KMI-05 (KM05) - 38mm TATCL100KMI-06 (KM06) -45mm ,TATCL100KMI-07 (KM07) - 52mm TATCL100KMI-08 (KM08) -58mm 3/4" Dr. TATCL100KMI-09 (KM09) -65mm ,TATCL100KMI-10 (KM10) - 70mm TATCL100KMI-11 (KM11) -75mm ,TATCL100KMI-12
TATYL221101B
New General Product Recommendations for the First Quarter of 2023
20pc Replaceable Powerful LockingUniversal Socket
19pc Socket - 1/2" Dr.8- 9- 10- 11- 12- 13- 14- 15- 16- 17- 18- 19- 20- 21- 22- 23- 24mm
Material: CR-MOSurface: mirror/with laser
1pc Locking female seat- 1/2"Dr.
Material: BodyCR-MO+ Aluminum alloysleeve
Surface treatment: bodymirror + anodized blue (sliding sleeve) Black blowcase + red and black two-color EVA
15pc Replaceable Powerful LockingUniversal Socket
14pc Socket - 1/2" Dr.8- 9- 10- 11- 12- 13- 14- 15- 16- 17- 18- 19- 20- 21 mm
Material: CR-MOSurface: manganese phosphate/with laser
1pc Locking female seat- 1/2"Dr.
Material: BodyCR-MO+ steel sleeve
Surface treatment: bodymanganese phosphate + matte gold sliding sleeve
TATYL221102E
TATYL221103E
Black blowcase + red and black two-color EVA
9pc Replaceable Powerful LockingUniversal Socket
8pc Socket - 1/2" Dr.17- 18- 19- 20- 21- 22- 23- 24 mm
Material: CR-MOSurface: manganese phosphate/with laser
1pc Locking female seat- 1/2"Dr.
Material: BodyCR-MO+ steel sleeve
Surface treatment: bodymanganese phosphate + matte gold sliding sleeve
Black blowcase + red and black two-color EVA
TWIST EXTRACTOR SET 3/8” DR.SAE /METRICS (10 PCS)
Removes worn, rusty, or deformed fasteners with a 3/8”square drive
Sizes include:5/16”,3/8”, 7/16”,12 mm, 1/2”, 9/16”,15 mm, 5/8”, 11/16”, and 3/4”For removalonly.
Do not use twist sockets to installnewnuts TATCT1030S
DEEP TWIST EXTRACTOR SET 3/8”DR SAE / METRIC (5 PCS)
Removes worn, rusty, or deformed fasteners with a 3/8”drive
Deep socket is suitable forhard to reach fasteners, exposed studs, recessed nuts and bolts,orrounded-offspark plugs. Sizes include 3/8”, 7/16” (11 mm),1/2”, 9/16” (14 mm),and 5/8” (16 mm) For removalonly. Do not use twist sockets to installnewnuts
Stepped Lever Wedge
TATFT1670103
Designed to assist alignmentof panels and glass. Steps in the tip to help gauge consistentspacing when resetting panels or glass.
Manufactured from POM material which is rigid and non-marking.
Composite
PryBar Kit
Won'tdamage painted or glass surfaces. TATFT21B07Z
Easilyand safelyremove automotive clips, fasteners, molding or gaskets from interior /exterior
These tools are molded to the idealstrength and flexibility, willnot damage automotive interiorcomponents / painted surfaces.
ITEM NO.PHOTOSDESCRIPTION
TATCT1030W
Composite PryBar & Scraper Kit
For numerous prying, scraping,aligning,cutting and shielding from interior/exterior applications. These tools are molded to the idealstrength and flexibility, willnot damage automotive interiorcomponents or painted surfaces.
TATFT303
TATFT313
TATFT22301
TATSF3341
TATFT22306
Composite Wire Installer Kit
Assist the placement and extraction of cables, connectors and components. Reduce the chance of damage to wire insulation.
Allowthe user to push, pull,and feed wires safer and more accurate.
Metal Skin Wedge Tool (Curved)
Unique design fits in tight gaps for removing exterior& interiortrims,moldings, panels, fasteners, clips,gaskets, dashboards and more withoutdamage.
Slim radius taperend for optimum blend of strength and access. High strength thin tip ( < 0.0187" ) with verylittle deflection
Originallydeveloped forthe aircraftindustry.
Metal Skin Wedge Tool ( Curved & Straight)
Unique design fits in tight gaps for removing exterior& interiortrims,moldings, panels, fasteners, clips,gaskets, dashboards and more withoutdamage.
Slim radius taperend for optimum blend of strength and access. High strength thin tip (< 0.0187")with verylittle deflection. Double-ended toolwith curved and straight tips. Originallydeveloped forthe aircraftindustry.
Trim Removal PryBar and Clip Lifter
TATCT1191
ITEM NO. PHOTOS
General Product Recommendations
the
2023
DESCRIPTION New
for
First Quarter of
Tool
• Setfor removing exterior and interior trim, molding, dashboards,doorpanels,and clips • Each toolis two-sided to increase its applicability and versatility • Metallic materialis not easilydamaged or broken,more durable than plastic panelremovaltools • Each toolis also available individually.Please check the
tab for partnumbers TATFT17B18Z2 MultiPurpose Trim and SealTool Kit (Light Duty) Prying Smoothing Kit O-Ring Removal Kit Scraper Kit- Angled Scraper KitStraight Seal /O-Ring Removal Kit Scraper Tool TATCL8688-5 ELBOWCONNECTOR OPEN END SOCKET SET This product is thetightening andloosening of theelbow connector (Ltypepiping joint). For example: a.Theelbow connector whichis usedfor theair suspensionof compactcars or truck over 4tons. b.Theelbow connector whichis usedfor theair brake. c. Theelbow connector whichis usedfor theconstructionmachinery. Itis possibletowork innarrow places Therearefivekinds of openendsockets, including 12mm, 14mm, 17mm,19mm and22mm,whichis usedfor most trucks and constructionmachinery. TATYF62079A SELF LOCKING HOSE CLAMP PLIERS (DUAL USE) ◎ Use forself-locking hose clamps. Dual-function for release and fixing. ◎Used for2 kinds ofself-locking hose clamps. ◎Applicable: car hose clamps of Tesla...etc.
Set
BOM
New General Product Recommendations for the First Quarter of 2023
UNIVERSAL FAN CLUTCH TURNINGWRENCH (PAT.)
EASYTO USE:
Adapts Quickly and EasilyTo Any1/2" Drive ToolSuch as Ratchets and Breaker Bars.
SLIMFIT DESIGN:
The Slim Fit Design Allows For Maximum Access To AnyFan Clutch Being Serviced.
EASYREAD:
Large EasyTo Read Laser Engraved Sizes.
QUALITYMATERIALS:
Made From High QualityStamped SteelFor Long ToolLife and Maximum Durability.
TATFT6500E05:32mm (1-1/4") /36mm (1-7/16") / 40mm (1-9/16") / 48mm (1-7/8")
TATFT6500F01: TATFT6500G01:
For Open Barrel Auto Connector & ToolKit
C Die & C1 Die
TerminalRelease Tool
Open BarrelTerminal:AWG 20-18/16-14/12-10/0.5-1.0/1.5-2.5/4.0-6.0 mm²
Open BarrelTerminal:AWG 26-24/24-22/22-18/0.1-0.25/0.25-0.5/0.5-1.0 mm²
Cooling System Vacuum Purge and RefillCoolant Pressure Tester Set (Metal handpump)
• Pressure pump to testleaks in cooling system
• Provided with 3 twist-on type and 16 threaded type adapters, covering almostalltypes of carmakesand models on the market
• Vacuum-type coolant refilltoolhas large internalpassages to allowcoolant to be refilled fast
• Radiator cap testtubes (black and blue)to testif the radiator cap from the car has leaks
Electric
Oil Extractor Set -
Cordless with Rechargeable Batteries (PAT.)
Cordless, batterypoweredoil suctiontool setis easytocarryandmovearound- noneedto connect toelectrical cableor shop air.
Includes 3Panasonic®rechargeablebatteries, anda100- 240Vcharging cable.
• Coolanthose and drain hose are made ofcold-resistant material TATCTEV8888
Special level detectionmechanism that shuts off thepump automaticallywhenfluidlevel reaches 4.3Ltoprevent tank from being overfilled.
Tank capacity: 5.5liter / 5.8quart. Special materials thatcanbemadetransparent, heatresistant andsuitablefor extracting engineoil, coolant, andATF.
Extensiontubes withouter diameters inØ4mm,6mm, 8mm, suitablefor oil dipstick tubes on differentcar makes.
Total tubelength2,700mm / 8.9ft (maintube connectedwithanextensiontube) canreach oil dipsticks ontall enginebays onSUVs, pickups,andlighttrucks.
Electric
Oil Extractor
Set - with 12V Alligator BatteryClips (PAT.)
•Electric oil suctiontool set poweredby12Vbattery(not included), easytouse, andnoneedfor anair compressor
•Special level detectionmechanism that shuts off thepump automaticallywhenfluid level reaches to4.3Ltopreventthetank from being overfilled
•Tank capacity: 5.5liter / 5.8quart. Special materials that canbemadetransparent, heatresistantandsuitablefor extracting engineoil, coolant, andATF
Extensiontubestoragesystem andtank lidcanbedetachedeasilyfor cleaning purposes. Sturdyroundbasethat holds thetank inplaceandpreventfrom wobbling. TATCTEV8889
•Extensiontubes withouter diameters inØ 4mm, 6mm, 8mm, suitablefor oil dipstick tubes ondifferentcar makes
•Total tube length2,700mm /8.9ft(maintubeconnectedwithanextensiontube)
canreachoil dipsticks ontall enginebays onSUVs,pickups, andlighttrucks
•Extensiontubestoragesystem andtank lidcanbedetachedeasilyfor cleaning purposes
•Sturdyroundbasethat holds thetank inplaceandavoidwobbling
ITEM NO.PHOTOSDESCRIPTION
TATFT6500
TATHWJB245AA12
TATCT1291267