Scheda Tecnica - Techical daTa SheeT N° 0936-87
Model:
S8011SAT4
Accessories:
DID4 - C25
shot blAsting systeM:
vacuum
nozzles n.:
4 (Ă˜10)
Working Pressure:
4 bar
grit used:
glass microballs 100/200 - corundum B150
MAchine descriPtion:
The plant consists of a working cabin that accommodates a 4-satellite rotary table, a vertical linear drive unit for gun motion, a fixed gun, a vacuum feed blasting device and a filtering cabinet. All system functions are controlled by a PLC and work parameters can be programmed and viewed from the operator panel. The work cycle is comprised of four steps: part loading/unloading outside the machine, 1st work station, 2nd work station, compressed air cleaning station.
treAting of the PArt:
hydraulic distributors
Productivity:
1 part / 15 seconds
PurPose:
deburring and surface preparation for better coating adhesion
HYDRAPAC ITALIA S.r.l. s.u.- HYDRAULIC COMPONENTS Vicolo Del Lavoro, 9 40069 Zola Predosa (Bologna) Italy tel. +39 051 755082 / fax +39 051 6185568/ mob.+39 340 5929116
E-mail: italia@hydrapac.it
Internet site: http://www.hydrapac.it/