product catalogue
GLASS & HARDWARE
TABLE OF CONTENTS About Goodline Glass & Hardware
3
GLASS Modular Glass Panels
4-5
GLASS HARDWARE Frameless Glass Spigot Sets
6
Glass Hardware Grout
7
Gate System Glass Gate Lathes & Hinges
8-9 10-11
Glass Handrail Fittings
12
Glass Stand-Off Pins
13
Glass Clamps
14-15
BALUSTRADE POSTS Pre-Fabricated Intermediate Posts
16-19
STAINLESS HARDWARE Swage Terminals
20
Swage Terminals, Grommets & Washes
21
Lag/ Eye Screws/Hose Reel
22
End Caps/Eye Bolts/Eye Nuts
23
Shower Posts
24-25
Goodline Ultimate Tube
26
Welded Tube
27
Base / Cover Plates, Flanges
28
Handrail Supports
29
2
| GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Goodline Showroom
Goodline Head Office
ABOUT OUR COMPANY Goodline Glass and Hardware specialises in the supply of modular glass panels and glass and stainless hardware products. We are a privately owned company backed by over 15 years of experience and research in the balustrade and pool fence fabrication and installation industry.
ABOUT OUR PRODUCTS At Goodline Glass and Hardware, we realise that exceptional design and quality are paramount to our customers. Therefore, we have specially designed many of our products to ensure that our customers receive products that are the best in the market. We have specifically sourced only the highest quality materials, and use the latest techniques in manufacturing to ensure that our products are built to last. Customers are welcome to visit our showroom to view samples of our products, and discuss their buying needs with us. Our showroom is located at the Goodline Group Head Office, 124-126 Steel Street, Capalaba QLD 4157.
HOW TO USE THIS CATALOGUE This catalogue has been produced and designed by Goodline Glass and Hardware, with thanks to iCreate Solutions. It is designed to provide detailed product specifications and to assist in product selection and ordering.
Although accurate at the time of printing, information contained in this catalogue is subject to change without notice. If you require further information or assistance about any of the products listed within, please contact us on any of the contact details listed at the bottom of this page.
DEFINITIONS 304 316 316L Wgt OD
: 304 Grade Stainless Steel : 316 Grade Stainless Steel : Low Carbon 316 Grade stainless steel : Weight of an item (g or kg) : Outside Diameter
All Measurements are given in Millimetres unless otherwise specified.
HOW TO ORDER
For information on our products, pricing, or to place an order, please contact us on the details below. Please note that information on delivery charges, terms of payment and our returns policy are also available when contacting us. Phone: 07 3245 1077 Fax: 07 3245 6973 Email: admin@goodlinegroup.com.au Showroom: 124-126 Steel Street, Capalaba Qld 4157 www.goodlinegroup.com.au/glassandhardware
MODULAR GLASS PANELS
GLASS
MODULAR GLASS PANELS Goodline Glass and Hardware stocks large quantities of high quality glass panels in a range of sizes. Our glass has been specifically sourced to ensure that quality is excellent, and cost is kept to a minimum. All panels are 12mm toughened glass, and can be coated or tinted as desired. Custom cut panels are available for order. All glass is stamped with a small logo confirming the Australian Standard Licence number to ensure safety.
4
| GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
MODULAR GLASS PANEL SIZES
GLASS
MODULAR GLASS PANEL SIZES • All glass panels are 12mm toughened glass with glazing certificate available • Large quantities of pre-cut sizes in stock • Custom-cut panels available to order • Custom coating and tinting also available Part Code Glass Glass Glass Glass Thickness Width Height Glass m2 Weight mm mm mm Kg Panel P12-400x1200 12mm 400 1200 .48 14 Panel P12-500x1200 12mm 500 1200 .60 18 Panel P12-600x1200 12mm 600 1200 .72 22 Panel P12-700x1200 12mm 700 1200 .84 25 Panel P12-800x1200 12mm 800 1200 .96 29 Panel P12-900x1200 12mm 900 1200 1.08 32 Panel P12-1000x1200 12mm 1000 1200 1.20 36 Panel P12-1100x1200 12mm 1100 1200 1.32 40 Panel P12-1200x1200 12mm 1200 1200 1.44 43 Panel P12-1300x1200 12mm 1300 1200 1.56 47 Panel P12-1400x1200 12mm 1400 1200 1.68 50 Panel P12-1500x1200 12mm 1500 1200 1.80 54 Panel P12-1600x1200 12mm 1600 1200 1.92 58 Panel P12-1700x1200 12mm 1700 1200 2.04 61 Panel P12-1800x1200 12mm 1800 1200 2.16 65 Panel P12-1900x1200 12mm 1900 1200 2.28 68 Panel P12-2000x1200 12mm 2000 1200 2.40 72 Gate GFS12-900x1240 12mm 900 1200 1.08 32 Gate* GFS12-850x1240 12mm 850 1200 1.02 30.6 Gate GFS12-800x1240 12mm 800 1200 0.96 28.8 Gate* G8-900x1200 8mm 900 1200 1.08 21.6 Gate G8-850x1200 8mm 850 1200 1.02 20.4 Gate G8-800x1200 8mm 800 1200 0.96 19.2 * 12mm glass is recommended for frameless application, and 8mm glass for semi-frameless application.
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
5
FRAMELESS GLASS SPIGOT SETS CORE DRILL SPIGOT SET • Made from solid billet 316L (low carbon) grade stainless steel (not a casting)
• Mirror finish. (available in satin upon special request) • Suits 10mm and 12mm glass (no holes required in glass) • Includes cover plate, pressure plate and plastic insert.
GLASS HARDWARE
Code Diameter Finish SPIG-CORE-R-CP 48mm Mirror
Deck Mount Spigot Set • Solid 316L grade stainless steel - low carbon content • Mirror finish. (available in satin upon special request) • Suits 10mm and 12mm glass (no holes required in glass) • Includes adjustable mounting plate, cover plate, pressure plate, plastic insert and screws Code
Diameter Finish
SPIG-DECK-R-CP 48mm
6
| GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Mirror
GLASS HARDWARE GROUT Eperiz Instant Grout – 15Kg • Structural Grout • When using the core drill fixing method we supply easy to use Epirez 5 Star rapid set grout. Simply add water, mix and pour into hole.
• The grout will be strong enough to support glass within 1 hour. • Setting times: 20MPA in 2 hours, 30MPA in 4 hours
GLASS HARDWARE
Code Weight G-E991609 15kg
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
7
GATE SYSTEM hydraulic FLOOR SPRING • Non-hold open floor spring unit, complete with stainless steel surround • Our sealing compound pack is recommended for areas subjected to water • Max door width 1100mm • Max door weight 100kg • Cover plate available in mirror or satin finish
GLASS HARDWARE
Code FS+B-SSM FS+B-SSS
Width Length Height 108mm 306mm 40mm 108mm 306mm 40mm
top patch • 316 Stainless Steel • Requires 20mm dia. glass holes • Glass gate cutout measurements as per drawing • Use in conjunction with Wall Pivot or Top Patch Pivot Arm Code Finish TP-SSM Mirror TP-SSS Satin
bottom patch • Use in conjunction with Hydraulic Floor Spring • 316 Stainless Steel • Requires 20mm dia. glass holes Code Finish BP-SSM Mirror BP-SSS Satin
wall pivot • Use in conjuction with Top Patch • Pivots from wall or flat surface • 316 Stainless Steel • Available in Mirror or Satin finish Code Finish PIV-WALL-SSM Mirror PIV-WALL-SSS Satin
8
| GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
MEDIUM MEDIUM GATE SYSTEM LEFT / RIGHT SUPPORTS LEFT / RIGHT SUPPORTS top patch pivot arm • Standard 180 degree (left and right 90 degree available) • Use in conjunction with Top Patch • 316 Stainless Steel • Glass cutout measurements same as Top Patch
GLASS HARDWARE
Code Finish TP-SSM+PA Mirror TP-SSS+PA Satin
sealing compound • Sealing compound to protect floor spring unit from water damage • Highly recommended for areas subjected to water • Two pack mix Code RESIN-FS
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
9
GLASS GATE latches & hinges GLASS TO GLASS 180o friction latch • Deluxe slimline friction latch which fits glass to glass • Hard wearing components with 316 grade stainless steel • Gate side requires 10mm dia. glass holes for safety
GLASS HARDWARE
Code Finish GL-STD-SSM Mirror GL-STD-SSS Satin
GLASS TO GLASS 90o FRICTION LATCH • Deluxe slimline friction latch which fits glass to glass • Hard wearing components with 316 grade stainless steel • In-swing style available upon special request • Non key lockable Code Finish GL-90-SSM Mirror GL-90-SSS Satin
GLASS TO ROUND POST FRICTION LATCH • Deluxe slimline friction latch which fits glass to round pos • Hard wearing components with 316 grade stainless steel • Non key lockable Code Finish GL-R50-SSM Mirror GL-R50-SSS Satin
10 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
SUITS 10mm GLASS G
MEDIUM MEDIUM GLASS GATE LEFTlatches / RIGHT SUPPORTS & hinges LEFT / RIGHT SUPPORTS
LOAD RATING 50kg PE 10mm DIA. HOLE REQ
Glass to Wall Friction Latch • Deluxe slimline glass clamp friction latch which fits glass to wall or square post
• Hard wearing components with 316 grade mirror finish stainless steel • Gate side requires 10mm dia. glass holes for safety • Non key lockable LATCH
Code Finish GL-SQ-50-SSM Mirror GL-SQ-50-SSS Satin
CODE GF-PGF75
GLASS HARDWARE
SLIM LINE SERIES 75mm SUIT SQUARE POS
10mm HOLES REQU
ROUND POST HINGE • Suits 8mm gate • 316 grade Stainless Steel • Self closing, spring loaded
316 STAINLESS STE
Code Finish HR-50-SSS Satin
E-MAIL ORDERS TO:
OLD STYLE LAT STILL AVAILAB
warehouse@jonoholdings.com.au PLEASE QUOTE CODES.
SQUARE POST/FLAT SURFACE HINGE • Suits 8mm gate • 316 grade Stainless Steel • Self closing, spring loaded Code Finish HF-50-SSS Satin
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
11
PA
GLASS HANDRAIL FITTINGS Handrail SUPPORT Flat Cap Round • Made from solid billet 316L (low carbon) grade stainless steel (not a casting)
• Suitable for 10, 12 and 15mm glass
GLASS HARDWARE
Code Diameter HRS+FL-50-SSM 50 HRS+FL-50-SSS 50
Finish Mirror Satin
Handrail SUPPORT Cone Cap Round • Made from solid billet 316L (low carbon) grade stainless steel (not a casting)
• Suitable for 10, 12 and 15mm glass Code Diameter HRS+CN-50-SSM 50 HRS+CN-50-SSS 50
Finish Mirror Satin
HANDRAIL SUPPORT (WALL MOUNT) • Made from solid billet 316L (low carbon) grade stainless steel (not a casting)
• Fixed to a range of wall surfaces via 3 x counter-sunk screw holes in mounting plate.
• Stylish cover to match glass handrail support. • Kit has 80mm offset centreline as standard. Different offsets available upon special request. Code Item Diameter HRBM-180x12-SSM Rod 50 HRBM-180x12-SSS Rod 50 ? Base ? ? Kit ? ? Kit ?
Finish Specs Mirror 80 Satin 80 ? ? ? ? ? ?
GA GRIPS • Multigrips sold with interchangable square and radius plastic jaws • Use to adjust and tighten stand-off handrail supports Code GA-GRIP
12 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
MEDIUM MEDIUM GLASS STAND-OFF LEFT / RIGHT PINS SUPPORTS LEFT / RIGHT SUPPORTS Glass Stand-off Pin “Flat Cap Round” • 316L (low carbon) Stainless Steel • Customised base options are available upon special request.
Machining fee will apply • Suitable for 10, 12 and 15mm glass Code Base Diameter Finish SO+FL-D50x30-316-SSM 30 50 Mirror SO+FL-D50x30-316-SSS 30 50 Satin SO+FL-D50x50-316-SSM 50 50 Mirror SO+FL-D50x50-316-SSS 50 50 Satin
GLASS HARDWARE
Glass Stand-off Pin “Cone Cap Round” • 316 Satin Stainless Steel • Customised base options are available upon special request.
Machining fee will apply • Suitable for 10, 12 and 15mm glass Code Base Diameter Finish SO+CN-D50x30-316-SSM 30 50 Mirror SO+CN-D50x30-316-SSS 30 50 Satin SO+CN-D50x50-316-SSM 50 50 Mirror SO+CN-D50x50-316-SSS 50 50 Satin
Lag Screw M12 • Made from solid billet 316L (low carbon) grade stainless steel (not a casting) Suits Stand-off Pin Code LS-M12-316SS
•
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
13
GLASS CLAMPS Glass Clamp – Large “D” • All gaskets included • Clamps can support approx. 60-80kgs per 2 clamps vertically positioned
T
Suit
H
D
GC-FB-LD-SSM GC-FB-LD-SSS
GC-RB-LD-SSM GC-RB-LD-SSM
W
L
Code
Finish
Glass
Suit
Post
H L W T D Wgt
GC-FB-LD-SSM M 8.0, 10.0,12.0 Sq/Flat GC-FB-LD-SSS S 8.0, 10.0, 12.0 Sq/Flat GC-RB-LD-SSM M 8.0, 10.0, 12.0 2” Round GC-RB-LD-SSM S 8.0, 10.0, 12.0 2” Round
55 60 32 16 9.0 405g 55 60 32 16 9.0 405g 55 60 32 16 9.0 405g 55 60 32 16 9.0 405g
GLASS HARDWARE
*Note: “L” measurement for radius black is from centre of radius
14 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
GLASS CLAMPS Glass Clamp – Large Square • All gaskets included • Clamps can support approx. 60-80kgs per 2 clamps vertically positioned Suit
Code
Finish
Glass
T
Suit
Post
H L W T D Wgt
GC-FB-LS-SSM M 8.0, 10.0, 12.0 Sq/Flat 55 55 32 16 9.0 440g GC-FB-LS-SSS S 8.0, 10.0, 12.0 Sq/Flat 55 55 32 16 9.0 440g GC-RB-LS-SSM M 8.0, 10.0, 12.0 2” Round 55 55 32 16 9.0 440g GC-RB-LS-SSS S 8.0, 10.0, 12.0 2” Round 55 55 32 16 9.0 440g
H
D
W
L
GC-FBLS-SSM GC-FB-LS-SSS
GC-RB-LS-SSM GC-RB-LS-SSS
GLASS HARDWARE
*Note: “L” measurement for 201 Series is from centre of radius
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
15
PRE-FABRICATED INTERMEDIATE POSTS PRE MADE INTERMEDIATE POSTS 25mm Square • Save time and money by using pre fabricated intermediate posts
• Custom sizes / raked for stairs available on request
• Suits wire or tubular balustrade • Made from 316 grade stainless steel Code Finish IP-SW-SSM Mirror IP-SW-SSS Satin
Round RHS Post • Save time and money by using pre fabricated intermediate posts
• Custom sizes / raked for stairs available on request
BALUSTRADE POSTS
Code Finish IP-RW-SSM Mirror IP-RW-SSS Satin
Round Post Glass Clamp Fixings • Save time and money by using pre fabricated intermediate posts • Custom sizes / raked for stairs available on request • Suits 8mm, 10mm, 12mm glass • Available with Large "D" or Large Square type glass clamps • Made from 316 grade stainless steel Code Finish IP-RG-SSM Mirror IP-RG-SSS Satin
16 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
MEDIUM MEDIUM LEFT / RIGHT PRE-FABRICATED INTERMEDIATE SUPPORTS POSTS LEFT / RIGHT SUPPORTS Square Post Glass Clamp Fixings • Save time and money by using pre fabricated intermediate posts • Custom sizes / raked for stairs available on request • Suits 8mm, 10mm, 12mm glass • Available with Large "D" or Large Square type glass clamps • Made from 316 grade stainless steel
BALUSTRADE POSTS
Code Finish IP-SG-SSM Mirror IP-SG-SSS Satin
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
17
id1131187 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
PRE-FABRICATED INTERMEDIATE POSTS Flat Bar Offset Spider Post • Save time and money by using pre fabricated intermediate posts • Made from 316 grade stainless steel • Suits 8mm and 10mm glass • Base plate allows easy fixing to concrete or timber
50
62 °
ø28
ø16
36°
75
875
700
1050
1050
Code Finish IP-FBOS-SSM Mirror
200 id1036734 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
125
10
8
60
100
150
Code
YK-9260 Date
Drawer
Robbin
2008-06-06
Unit
MM
Remark
Square Post Glass Clamp Fixings with Top Rail Saddle • Save time and money by using pre fabricated intermediate posts Inspector Client • Made from 316 grade stainless steel JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET • Suits 8mm and 10mm glass • Base plate allows easy fixing to concrete or timber Ø42
Size
SUS304
45
45
80
H:1050MM Material
758
1050
45
BALUSTRADE POSTS
928
713
1050
Code Finish IP-SQGL-SSM Mirror
62
26.5
100
8
40
8
102
125
45
id1012687 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
Code
YK-9238
Date
2008-06-06
Unit
Drawer
Robbin
Size
H1050MM
Material SUS 316/304
MM
Remark
Round Post Glass Clamp Fixings with Top Rail Saddle Inspector • Save time and money by using pre fabricated intermediate posts Client • Made from 316 grade stainless steel JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET • Suits 8mm and 10mm glass • Base plate allows easy fixing to concrete or timber 45
50
75
Ø42
758
1050 62
18
ø92
8
ø50
Code
8
102
125
45
26.5
45
933
713
1050
Code Finish IP-RDGL-SSM Mirror
YK-9220
Date
2008-06-06 Unit
Drawer H:1050MM Material Robbin Size | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE Inspector
Client
MM SUS 316/304
Remark
id1061671 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
MEDIUM MEDIUM LEFT / RIGHT PRE-FABRICATED INTERMEDIATE SUPPORTS POSTS LEFT / RIGHT SUPPORTS Ø42
Ø
50
Flat Bar Boss Post with Top Rail Saddle • Save time and money by using pre fabricated intermediate posts • Made from 304 grade stainless steel • Suits 8mm and 10mm glass • Base plate allows easy fixing to concrete or timber • Adjustable balustrade bosses to suit 12mm round tube
126.5
75
.7 12
958
1050.4
126.3
126.3
126.3
1050
126.3
126.3
Code Finish IP-FBB-SSM Mirror
40
38 70
100
Code
0806-01
Date Ø4
2008-06-10
Unit
Drawer
Robbin
Size
H:1050MM
Material SUS 316/304
Inspector 125
Flat Bar Spider Post with Top Rail Saddle • Save time and money by using pre fabricated intermediate posts • Made from 304 grade stainless steel • Suits 8mm and 10mm glass • Base plate allows easy fixing to concrete or timber • Glass clamping arms adjust to accommodate angles for glass on ramps,
8
125
id1084656 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
2. 4
MM
Remark
Client
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
BALUSTRADE POSTS
1050
1050
769
landings or stairs. Code Finish IP-FBS-SSM Mirror
8
8
28 40
125
ø
ø16
180
70
130
Code
0806-02
Date
2008-06-10
Unit
Drawer
Robbin
Size
H:1050MM
Material SUS 316/304
Inspector
MM
Remark
Client
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
19
SWAGE TERMINALS FORK TERMINAL SWAGE • 316 grade stainless steel
L1 L2
Code
A
Rope Ø A
D
L1
L2
RWL
TDL
Wgt
FT-1/8x5MMPIN 3.2 8.5 5 65 32 313 1250 22g D
ALLEN KEY HEAD TENSIONER • Suitable for use with threaded terminals (see pg19) in either stairway or horizontal balustrading applications
• Internal thread • Use with bevelled washers to complete a staircase • 316 grade stainless steel
L L1
Code D
AKHT-M5 AKHT-M6
Thread M5 M6
D 8 8
L
L1
Wgt
42 42
40 40
11g 8g
CONE HEAD TERMINAL • Gives a flush look to balustrade jobs when used in conjunction with a countersunk drill bit
• 316 grade stainless steel Code
L L1 D
Rope Ø
D
L
L1
Wgt
CHT-3.2 3.2 6 58 53.5 12g CHT-4.0 4.0 7 69.5 63 20g
Button Head Terminal Swage • 316 grade stainless steel
L L1 D
D1 L2
Code BHTS-3.2 BHTS-4.0
Rope Ø
D
D1
L
L1
L2
RWL
TDL Wgt
3.2 9.5 6 38 35 28 250 1000 6g 4.0 12.5 7 54 50 44 475 1900 14g
STAINLESS HARDWARE
LAG SCREW / SWAGE TERMINAL • Sleek, easy to use and economical balustrade terminals • When ordering, each length must have a L/Hand & R/Hand terminal • Not suitable for long lengths • 316 grade stainless steel Code L2
L
L1
LS-ST-L LS-ST-R
Wire Ø E L L1 L2 Wgt 3.2 6/LHT 90 3.2 6/RHT 90
48 48
42 42
15g 15g
E
LAG SCREW / TERMINAL • 316 grade stainless steel Code LST-M5 LST-M6
L2
L
L1
E
20
| GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
T E L L1 L2 Wgt M5 5/LHT 92.5 44 38.5 M6 6/RHT 96 .049 39.0
12g 17g
SWAGE TERMINALS, grommets and washers RIGGING SCREW JAW + SWAGE W/LOCK NUTS • 316 grade stainless steel Code Rope Ø T B D H L L1 RWL Wgt JAW T/B-5MM-316SS M5 8.5 5.0 9 155 80 150 750
Use in conjunction with CSPAN-RS-M5 (Specialised Tools)
TDL 52g
H
T L1
L
B
D
THREADED TERMINAL SWAGE STUD W/LOCK NUT • 316 grade stainless steel *Also available in left hand thread Code
Rope Ø
T
D
L
L1
L2 Wgt
TTSS-LN-M5 3.2 M5 6 90 42 39 14g TTSS-LN-M6 3.2 M6 6 100 48 39 18g
D
T L1
L2 L
NYLON GROmmET SPLIT TYPE • Nylon bush for protecting wire from cutting on sharp objects, push-fit into posts
D2
H
• Install after balustrading is installed Code NGST-B NGST-S NGST-C
D 6.5 6.5 6.5
D1
D2
H
9.0 12.5 2.5 9.0 12.5 2.5 9.0 12.5 2.5
Colour Drill Hole Ø Wire Rope Ø Black Silver Clear
11/32” 11/32” 11/32”
D
3.2 - 5.0 3.2 - 5.0 3.2 - 5.0
NYLON GROmmET SPLIT TYPE - ANGLE • 37° angled grommet for use in stairs Code NGST-A-W NGST-A-G NGST-A-B
D1
C
A
B
C
D
Colour Drill Hole Ø Wire Rope Ø
4.2 4.2 4.2
8 8 8
15 15 15
9 9 9
WHITE GREY BLACK
11/32” 11/32” 11/32”
3.2 - 4.0 3.2 - 4.0 3.2 - 4.0
B
A D
BEVELLED WASHER CHROME PLATED BRASS • 35° angled washer for use with swage fittings and tensioners
A°
(stairway + balustrading) Code A D I L Wgt
IØ
3g 2g
L
D
BEVELLED WASHER • 35° angled washer for use with cone head terminals (stairway +
A°
balustrading)
• 304 grade stainless steel Code
IØ
A L D I Wgt
BW-304-11.8 35° 13.3 BW-304-13.8 35° 16.3
11.8 13.8
7.1 8.0
STAINLESS HARDWARE
BW-CP-6.3 35° 11 6.3 10 BW-CP-8.3 35° 11 8.3 10
4g 7g
D
L
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
21
LAG / EYE SCREWS / HOSE REEL LAG EYE SCREW (Timber Thread) Code
D2
L1
D
L2
D D2 L L1 L2 Weight
LS-R6xL45-316SS 4 LS-R6XL55-316SS 6 LS-R6XL60-316SS 8 LS-R6XL80-316SS 10 LS-R6XL105-316SS 12
4.2 6.3 8.4 10.5 12.5
30 32 40 55 65
45 55 60 80 105
51 65 70 100 123
4g 11g 22g 53g 94g
L
SOCKET DRIVE FOR LAG SCREWS • Insert in drill for fast installation of lag screws Code SDLS-M6 SDLS-M8
Time Saving Investment!
D 6.5 A/F 9.0 A/F
Suit Lag Screw LS-06 LS-08
Weight 15g 50g
D
EYE SCREW (Metal Thread) • A high quality threaded eye suitable for fixing to steel posts • Fully threaded shank for hard fixing to posts Code
L1 E
D L2
STAINLESS HARDWARE
L
D L L1 L2 E Wgt
ESMT-M6x10 M6 ESMT-M6x30 M6 ESMT-M6x53 M6 ESMT-M6x60 M6 ESMT-M8x80 M8 ESMT-M10x110 M10 ESMT-M12x40 M12
26 10 43 30 69 53 77 60 89 80 119 110 63 40
10 26 50 50 70 100 25
6.1 6.1 6.1 6.1 7.9 10.1 12.3
10g 11g 16g 15g 36g 68g 60g
HOSE/ROPE REEL • Sturdy design and resistant to rust • Suitable for hoses or ropes • Residential or marine use • Custom engraving available • Lifetime warranty Code HR-304
22 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Material 304
END CAPS / EYE BOLTS / EYE NUTS END CAP “SELF GRIP” • A popular cast, intermediate dome cap with knurled grip for fit into tube Code
Tube Ø
Wall
B
H
Wgt
EC-SG-1.5 1 ½” 1.5 38.1 2.5 65g EC-SG-2 2” 1.5 50.8 2.5 125g
END CAP “DOME” • A popular cast dome cap, used for handrail ends or freestanding post tops Code
Tube Ø
Wall
B
H
Wgt
B
H
B
EC-D-1 1” 1.5 25.4 13 30g EC-D-1.5 1 ½” 1.5 38.1 19 65g EC-D-2 2” 1.5 50.8 25 150g
H
END CAP “FLAT” • A popular cast true flat end cap, used for handrail ends or freestanding post tops Code
Tube Ø
EC-F-1 EC-F-1.5 EC-F-2
1” 1.5 25.4 1.8 20g 1 ½” 1.5 38.1 3.5 50g 2” 1.5 50.8 4.0 85g
Wall
B
H
Wgt
END CAP “LIGHT KNOCK-IN” • Attractive self holding, slightly domed end cap • A soft faced hammer is used to tap these in place • Suitable for handrail ends or freestanding post tops CODE
Tube Ø
Wall
B
B H
Wgt
H
STAINLESS HARDWARE
EC-LNI-1 1” 1.5 25.4 4.0 10g EC-LNI-1.5 1 ½” 1.5 38.1 6.0 15g EC-LNI-2 2” 1.5 50.8 8.0 30g
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
23
shower posts SHOWER POSTS Goodline Glass and Hardware proudly stocks high quality stainless steel shower posts and fittings. Made from 316 stainless steel, the posts are suitable for both outdoor and indoor use. Supplied in mirror finish, both straight and curved options are available. A choice of shower rose and tap fittings are available and should be specified on orders. All shower posts are supplied as a complete set containing a stainless steel base, screws (with stylish cone-shaped caps), a shower rose, and tap fittings (please note Forme tap style supplied by default).
Shower Post - Curved Code SH-CUR
Material Finish 316 Mirror
Shower Post - STRAIGHT
STAINLESS HARDWARE
Code SH-STR
24 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Material Finish 316 Mirror
STAINLESS HARDWARE
shower posts
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
25
Goodline Ultimate Tube GOODLINE ULTIMATE TUBE Goodline Ultimate Tube is a premium mirror polish tube that is highly reflective and a leading product in the market. Goodline Ultimate is available only in 316L marine grade stainless steel which contains a low carbon content making it more resistant to discolouration of the surface, commonly referred to as ‘tea staining’. This feature is of particular importance for use near marine environments, or other salt water areas (such as salt water swimming pools). This tube requires lower maintenance than other grades of stainless steel to maintain its consistent, high quality finish. Goodline Ultimate is available in four different profiles – Oval, D shape, Triangular and Round. All Ultimate tube is packed in individual plastic sleeves to protect it from scratching and marking.
STAINLESS HARDWARE
Code Shape mm Wall Thickness Length (m) GUT4826-160 Oval 48.00 x 26.00 1.60 6 GUT6234-160 D Shape 62.00 x 34.00 1.60 6 GUT4826-160 Triangle 48.00 x 26.00 1.60 6 GUT19 -120 Round 19.05 1.20 5.8 GUT19 -160 Round 19.05 1.60 5.8 GUT22-120 Round 22.22 1.20 5.8 GUT22 -160 Round 22.22 1.60 5.8 GUT25 -120 Round 25.40 1.20 5.8 GUT25-160 Round 25.40 1.60 5.8 GUT31 -160 Round 31.75 1.60 5.8 GUT38-120 Round 38.10 1.20 5.8 GUT38-160 Round 38.10 1.60 5.8 GUT44-160 Round 44.45 1.60 5.8 GUT44-200 Round 44.45 2.00 5.8 GUT50-160 Round 50.80 1.60 5.8 GUT63-160 Round 63.40 1.60 5.8 GUT76-160 Round 76.30 1.60 5.8 GUT101-160 Round 101.60 1.60 5.8 GUT101-200 Round 101.60 2.00 5.8 GUT152-160 Round 152.40 1.60 5.8 GUT152-200 Round 152.40 2.00 5.8
26 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Stainless weldedSteel tube Tubing RECTANGLE STAINLESS STEEL WELDED TUBE • Custom cut lengths available - cutting fee may apply Code Wgt
Wall
RWT-SSM 1.6 RWT-SSS
1.6
Finish
Lgth Width
Mirror Satin
Height
Grade
6m
50
25
316
6m
50
25
316
SQUARE STAINLESS STEEL WELDED TUBE • Custom cut lengths available - cutting fee may apply Code
OD
SWT-SSM SWT-SSS
50 50
Wall Finish Lgth Grade Wgt 1.5 1.5
Mirror Satin
6mtr 6mtr
AISI 316 AISI 316
13kg 13kg
O.D.
ROUND SLOTTED S/STEEL WELDED TUBE • Ideal for corner posts for balustrading and pool fencing • All tube available in cut lengths – cutting fee may apply • Slotted tube infill available – see page 50 Code
O.D. Wall
W
H
Slot
Finish Lgth
Wgt
RSWT-SS 2” 1.5 15 15 Single Mirror 6m 13kg RSWT-DS 2” 1.5 15 15 Double Mirror 6m 15kg RSWT-NS 2” 1.5 15 15 90º Mirror 3m 6.5kg
O.D.
O.D.
H
H W
H W
STAINLESS HARDWARE
W
O.D.
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
27
BASE / COVER PLATES, FLANGES A
ROUND BASE PLATE W/COVER (WELD) • Base plate made from 304 grade stainless steel. Coverplate made from
T
• “3” Hole base plate with clip on cover • This item must be welded • Mirror polished cover plate
316 grade stainless steel
IØ
Code
B
RD-BP+C-0.5 ½” RD-BP+C-1 1” RD-BP+C-1.5 1 ½” RD-BP+C-2 2”
Tube Ø
A
B
I
65 2.0 65 2.0 80 2.0 100 3.0
T
6.5 6.5 6.5 8.5
13.0 25.5 38.3 51.0
Wgt 81g 72g 100g 217g
ROUND COVER PLATE ONLY • Made from 316 grade stainless steel • Domed cover plate • Suits posts/handrails which are set into a surface or over a fixed base
A
plate
T
Code
H B
Tube Ø
A
B
H
T
Finish
Wgt
RD-C-0.5 ½” 67 0.80 15 13.1 Mirror 30g RD-C-0.5 1” 67 0.80 15 25.8 Mirror 28g RD-C-0.5 1 ½” 82 0.80 17 38.4 Mirror 41g RD-C-0.5 2” 102 0.80 26 51.2 Mirror 88g RD-C-0.5 2” 102 0.80 26 51.2 Satin 88g
ROUND BASE PLATE ONLY (WELD) • Made from 304 grade stainless steel • “3” Hole base plate in mill surface finish • This item must be welded
A
Code
T
Tube Ø
RD-BP-0.5 RD-BP-1.0 RD-BP-1.5 RD-BP-2.0
IØ B
A
½” 1” 1 ½” 2”
B
I
65 2.0 65 2.0 80 2.0 100 3.0
6.5 6.5 6.5 8.5
T 13.0 25.5 38.3 51.0
Wgt 51g 44g 59g 129g
OBLONG BASE PLATE/FLANGE • Made from 316 grade stainless steel • Heavy duty cast “2” hole slab base • Suitable for fixing handrails in between timber, masonry or steel posts • May also be used for floor mounting where space is limited C
B
IØ
Code BPL-1.0 OBPL-1.5 OBPL-2.0
STAINLESS HARDWARE
A
B
D°
Tube Ø
A
B
C
I
1” 70 25.4 40 5.0 1 ½” 2”
75 38.1 56 100 50.8 69
5.0 6.5
Wgt 85g 140g 255g
WALL STOP FLANGE • Made from 316 grade stainless steel • “3” hole cast angled flange (please specify stairway angle when ordering)
• Suitable for fixing handrails down stairways between timber, masonry or steel A
IØ
posts
• Flange can be turned 180 ° to complete the stairway handrail Code
W
28 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Tube Ø
D
A
B
W
I
Wgt
WSF-32-1.5 1 ½” 32° 97 38.1 64 6.5 205g WSF-45-2 2” 45° 130 50.8 70 7.0 260g WSF-37-2 2” 37° 110 50.8 70 6.0 260g
HANDRAIL SUPPORTS HANDRAIL SUPPORT “RADIUSED” • Made from 316 grade stainless steel • Three hole handrail support designed for fixing to any type of wall • Radiused top with countersunk holes allows a handrail to be attached
DØ
C
R
C
R
without the need for welding Code
A B C D I R Wgt
HRS-R-1.5 63 85 31 12 5.5 1 ½” 247g HRS-R-2 63 85 31 12 5.5 2” 247g
H/RAIL SUPPort W/- COACH SCREW “RADIUSED” • Made from 316 grade stainless steel • Coach screw fix handrail support designed for fixing into timber stud wall • Radiused top with countersunk holes allows a handrail to be attached
B
IØ
DØ
B
without the need for welding Code
IØ
A
A
A B C D L R Wgt
HRS-CS-R-1.5 63 85 31 12 50 1 ½” 280g HRS-CS-R-2 63 85 31 12 40 2” 280g
HANDRAIL SUPPORT “FLAT TOP” • Made from 316 grade stainless steel • Three hole handrail support designed for fixing to any type of wall • Flat top with countersunk holes allows a handrail to be attached without
L
DØ
C
DØ
the need for welding A B C D I Wgt
HRS-FT
63 85 31 12 5.5 243g
H/RAIL SUPPORT W/- COACH SCREW “FLAT TOP” • Made from 316 grade stainless steel • Coach screw fix handrail support designed for fixing into timber stud wall • The flat top with countersunk holes allows a handrail to be attached
B
IØ
A B C D L Wgt
HRS-CS-FT
63 85 31 12 60 280g
HANDRAIL SUPPORT W/OUT TOP • Made from 316 grade stainless steel • Three hole handrail support designed for fixing to any type of wall • Unradiused fitting allows any handrail to be welded or fastened to the bracket Code
A B D I Wgt
HRS-WT
63 85 12 5.5 235g
H/RAIL SUPP. W/- COACH SCREW w/out top • Made from 316 grade stainless steel • Coach screw fix handrail support designed for fixing into timber stud wall • Unradiused fitting allows any handrail to be welded or fastened to the bracket Code
C
DØ
B
without the need for welding Code
IØ
A
A
L
DØ
DØ
B
IØ
A
STAINLESS HARDWARE
Code
IØ
DØ
B A
A B D L Wgt
HRS-CS-WT 63 85 12 60 255g DØ
L
GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
29
leaders in design & quality GLASS & HARDWARE
124-126 Steel Street, Capalaba QLD 4157, Australia T: 07 3245 1077 F: 07 3245 6973 E: admin@goodlinegroup.com.au W: www.goodlineglassandhardware.com.au