GO TO THE SOURCE. A BETTER MACHINE? WANT TO BUILD
Innovation starts with Bosch Rexroth and HydraForce. Our expert application engineers design efficient electro-hydraulic systems, delivering compact hydraulic solutions that enhance machine performance. Whether it’s an upgrade, redesign or new motion control application, rely on our global team to help you gain a competitive edge.
7-13, 2025
Build a Better Machine
Munich, Germany April
Hall A3, Booth 327
Departments
08 Ensuring Safe and Efficient Railway Operations with Pressure Switches for Train & Railroad Equipment
Pressure switches play a vital role in modern rail transportation.
COVER STORY 10 Hot Water and the VDPC
Water heater temperature setting extends hot water supply. 12 Optimizing Hydraulic Power Units
Hydraulic power units boost efficiency and cut costs with advanced pump and motor technologies. » TEST YOUR SKILLS 18 Calculating Peak Flow
Stay sharp with this monthly lesson from the IFPS's study guide. 20 Eliminating Hose Breakage Due to Driver Error
Waste bracket coupler prevents costly drive-off errors in waste compactor operations.
Publisher’s Note: The information provided in this publication is for informational purposes only. While all efforts have been taken to ensure the technical accuracy of the material enclosed, Fluid Power Journal is not responsible for the availability, accuracy, currency, or reliability of any information, statement, opinion, or advice contained in a third party’s material. Fluid Power Journal will not be liable for any loss or damage caused by reliance on information obtained in this publication.
Enhancing Hydraulic System Reliability
KEY DESIGN CONSIDERATIONS AND THE IMPORTANCE OF FLUID POWER TRAINING
By Robert Sheaf, Senior Consultant, CFC Industrial Training
» AS AN INSTRUCTOR and troubleshooter of fluid power systems, I’ve found that so many hydraulic systems can be designed and built in a manner that would extend their life and incur fewer problems along the way. This is true starting from the actuator and moving down to the reservoir. Training in fluid power is so desperately needed in our industry. So many of my service calls were resolved using simple solutions, and users often lacked the knowledge of what caused the problem. The following are several suggestions designers and users should seriously consider.
Actuators with case drains extend shaft seal life and are a great tool for determining the condition of the mechanical internals. Cylinder rod seals’ most common failure is due to external contamination and intensified pressure, caused by metering out the flow on the rod end. Rod boots and using meter-in flow controls on the cap end with a counterbalance valve on the rod side, instead of meter-out flow control, reduces this problem. "Meter out when in doubt but watch out” is a favorite saying of mine as a
reminder of this problem. Also, a cylinder and its rod side hose must be designed based on potential intensification pressures and not the system’s main pump relief valve or compensator setting.
Pumps with properly sized intake lines mounted alongside or under the reservoir reduce cavitation damage and noise levels. Pressure-compensated pumps’ noise levels get louder as the pressure increases and quieter as they reach the pumps’ maximum compensator setting. If a pump’s intake is located 1m (3 feet) below the fluid level, it would have a pressure of 8.3 kPa (1.2 psig). Mounted on top of a reservoir with intake 0.6m (2 feet) above the fluid level, a 41 mm (1.6”) hg pressure would occur. Vane and gear pumps rotated at 1200 rpm instead of 1800 are quieter and experience extended life.
Reservoirs built with an “L” shape design using tall and skinny sides dissipate more heat to the ambient air and improve pump intake conditions. With water being the major system contaminant, filler breathers should be used with a water rejection element. Air moisture flowing into a reservoir is rejected, while moisture already in the reservoir is allowed to pass through the filter element as air leaves the opposite direction. This lowers the relative humidity in the reservoir. Return filters with electrical or visual indicators should be used so their elements are only replaced as needed.
When I used to operate a hydraulic repair shop, we received pumps for repair. It was surprising how many appeared to be operational when disassembled. When we contacted the customer and asked why they sent us the pump, they responded that their system had lost its pressure. Remember, a pump’s job is to provide flow and cannot
cause pressure. Think of a pump outlet flowing directly back to the tank with a 2000 psi gauge connected to it. Would it indicate any readable PSI other than what it takes to push the flow through the plumbing? Often, the customer just had a pilot-operated pressure control with nothing more than a blocked control orifice. I explained in these instances how a control orifice worked and how it caused a lack of pressure problem. I encourage anyone interested in furthering themselves in the fluid power industry to get involved with the IFPS. They should start certifying at the mechanic level and work their way up to as high as they are capable. When they are interested and have a fluid power schoolbook, I tell them to study the chapters on schematic reading and pressure controls. These two items were a great help to me at the start of my fluid power career. I joined the IFPS back in the late 80s and it was one of the best career moves I made to further my industry knowledge.
As an added final note, I want to thank all those who nominated me in the past for consideration as a new member of the IFPS Hall of Fame. At the time, I owned a fluid power-oriented training business with no college degree and felt uncomfortable accepting the nomination. However, when I retired and sold my company, the new owners insisted as part of their sell agreement that I accept the honor if I was nominated and elected. Thanks again to all those who voted and supported my election. Much to my surprise, my six children, their families, my brother, and several grandsons were there at the annual IFPS meeting in Kansas City to congratulate me on my induction into the Hall of Fame.
PUBLISHER
Innovative Designs & Publishing, Inc.
3245 Freemansburg Avenue, Palmer, PA 18045-7118
Tel: 800-730-5904 or 610-923-0380
Fax: 610-923-0390
• Email: Art@FluidPowerJournal.com www.FluidPowerJournal.com
Founders: Paul and Lisa Prass
Associate Publisher: Hannah Coursey
Editor: Lauren Schmeal
Technical Editor: Dan Helgerson, CFPAI/AJPP, CFPS, CFPECS, CFPSD, CFPMT, CFPCC
Senior Marketing Consultant: Bob McKinney
Graphic Designer: Nicholas Reeder
Accounting: Kim Kressman, Donna Bachman
Circulation Manager: Josh Shoup
INTERNATIONAL FLUID POWER SOCIETY
1930 East Marlton Pike, Suite A-2, Cherry Hill, NJ 08003-2141
Tel: 856-424-8998 • Fax: 856-424-9248
Email: AskUs@ifps.org • Web: www.ifps.org
2025 BOARD OF DIRECTORS
President: Garrett Hoisington, CFPAI, CFPS, CFPMHM
Immediate Past President: Jeff Hodges, CFPAI/AJPP, CFPMHM - Altec Industries, Inc
First Vice President: Chauntelle Baughman, CFPHSOneHydraulics, Inc.
Treasurer: Elisabeth DeBenedetto, CCFPS, GS Global Resources
Vice President Education: Daniel Fernandes, CFPS, CFPECS, Hawe Hydraulics
Vice President Membership: Brian Wheeler, CFPAI/AJPP - The Boeing Company
Vice President Certification: Bruce Bowe, CFPAI/AJPP - Altec Industries, Inc.
Vice President Marketing: Bradlee Dittmer, CFPPS - IMI Precision Engineering
DIRECTORS-AT-LARGE
Tyler Janecek, CFPHS - Engineering Systems, Inc
John Juhasz, CFPS - Kraft Fluid Systems
Stephen Blazer, CFPE- Altec Industries, Inc. Brian Kenoyer, CFPS - Cemen Tech
Jeff Curlee, CFPS -Cross Mobile Hydraulics & Controls
Quest Duperron, CFPIHM, CFPCC - Coastal Hydraulics, Inc.
Cary Boozer, CFPE - Motion Industries, Inc.
Steven Downey, CFPAI, CFPS - Hydraulex Deepak Kadamanahalli, CFPS - CNH Industrial Kyler Craig Ridgeway, CFPHS - Bradbury Company Alex Kummer, CFPE, - National Oilwell Varco Wade Lowe, CFPS - Hydraquip Distribution, Inc.
CHIEF EXECUTIVE OFFICER (EX-OFFICIO) Donna Pollander, ACA
HONORARY DIRECTOR (EX-OFFICIO) Ernie Parker, Hydra Tech, Inc. CFPAI/AJPP
James O'Halek, CFPAI/AJPP, CFPMM, CFPMIP, CFPCCThe Boeing Company
IFPS STAFF
Chief Executive Officer: Donna Pollander, ACA
Communications Coordinator: Stephanie Coleman
Director Training/Development: Bradley (BJ) Wagner, CFPAI/ AJPP
Assistant Director: Jenna Mort
Certification Logistics Manager: Kyle Pollander
Bookkeeper: Diane McMahon
Instructional Designer & Layout: Chalie Clair
Fluid Power Journal (ISSN# 1073-7898) is the official publication of the International Fluid Power Society published monthly with four supplemental issues, including a Systems Integrator Directory, Off-Highway Suppliers Directory, Tech Directory, and Manufacturers Directory, by Innovative Designs & Publishing, Inc., 3245 Freemansburg Avenue, Palmer, PA 18045-7118. All Rights Reserved. Reproduction in whole or in part of any material in this publication is acceptable with credit. Publishers assume no liability for any information published. We reserve the right to accept or reject all advertising material and will not guarantee the return or safety of unsolicited art, photographs, or manuscripts.
NEW
PROBLEM
Calculate the Cylinder Size
By Ernie Parker,
CFPAI, CFPSD, CFPS, CFPMM, CFPMT, CFPMIP, CFPMMH, CFPMIH, CFPE
METRIC QUESTION
» WE HAVE A cylinder with a 50 mm rod supporting a bar with two pulleys as shown. Calculate the standard size cylinder needed to hold the load at .71 MPa. Also, what is the force needed at the end of each cable to hold the load?
US CUSTOMARY QUESTION
» WE HAVE A cylinder with a 2” rod supporting a bar with two pulleys as shown. Calculate the standard size cylinder needed to hold the load at 100 psi. Also, what is the force needed at the end of each cable to hold the load?
For the solution, see page 34.
OEM’s, integrators, and factories all over the world are turning to Assured Automation’s compact on/o valves and high-cycle ball valves to improve machine reliability and increase productivity.
Simplified hose configuration, less hose and adapters combine to reduce repairs and downtime cutting the overall cost of hydraulics.
No Kinks No Hose Twisting
• Available In 304 & 440 Stainless Steel
• Rated To 10,000 P.S.I.
• Custom Design & Sizes Available
• Rebuildable Ball Bearing Design
• Full Flow —Low Pressure Drop
• Superior Quality Alloy Steel
• Side Load Resistant
• Heat Treated
HYDR AULIC FL ANGES D COMPONENTS
MAIN’S ADVANTAGES
DEPENDABLE - 65 years of hydraulic experience
INFORMED - Main’s engineers are active on the SAE, NFPA, and ISO tech committees
QUICK - Thousands of Styles and Flange Types STOCKED
Grand Blanc, MI 48439
800.521.7918
info@MAINmfg.com www.MAINmfg.com/fpj
www.MAINmfg.com/fpj PH: 800-521-7918 info@MAINmfg.com Grand Blanc, MI 48439
Ensuring Safe and Efficient Railway Operations with Pressure Switches for Train & Railroad Equipment
By Skyler Libkie, Technical Writer, SUCO ESI North America
Safety, reliability, and efficiency are of paramount importance in the dynamic world of rail transportation. The smooth operation of railroad equipment, from passenger trains to freight locomotives, depends on the seamless integration of complex components and systems. The pressure switch is a critical component in this puzzle; it plays a crucial role in monitoring and controlling different aspects of railroad and train equipment.
The Application of Pressure Switches in Train & Railroad Equipment
In the railroad industry, pressure switches are used in many applications including train braking systems. These devices monitor and react to pressure changes, providing precise controls and safeguards for vital systems. Pressure switches improve the safety, performance, and reliability of railroad and train equipment by accurately detecting and responding to pressure levels.
Pressure switches monitor the pressure in the brake pipes continuously, ensuring the brakes work properly and preventing sudden braking or power loss. Switches are used to maintain optimal pressure levels to help ensure smooth, controlled braking. This reduces the risk of accidents and enhances passenger safety. Pressure switches also play
a crucial role in track-switching systems. These switches enable precise control of the pressure in the switch mechanisms so trains may smoothly be diverted between tracks. This ensures accurate and reliable pressure control, along with efficient and safe track-switching operations.
Switches are also vital in pantograph operation, monitoring the pressure that the pantograph of the train applies to the overhead power lines while also registering the interaction between the pantograph and the lines. This ensures proper power collection and prevents damage to the pantograph itself or to the infrastructure. The system improves the reliability of train power supplies while increasing safety across the entire railway system.
Pressure switches monitor air pressure in the passenger compartments of trains. This maintains a safe and comfortable environment for passengers. These switches are also used in the door operation mechanism, which controls the pneumatic actuators that open and close train doors. This allows for smooth and safe passenger entry and departure.
The Advantages of Pressure Switches and Pressure Sensors
The railroad industry often faces unique challenges that can be overcome using a wide
range of pressure switch products designed specifically to meet the demands of trains and railroad equipment. Pressure switches provide superior performance, durability, and reliability even under the most demanding operating conditions:
1. Monitoring and Control of Air Brakes: Pressure sensors are used to monitor and control air pressure in train brake systems, ensuring that the brakes function properly to ensure safe stopping.
2. Hydraulic Systems: In addition to air brake systems, pressure sensors are used in hydraulic systems to monitor fluid pressure, helping maintain the proper operation of train components including suspension and steering.
3. Durability: Pressure switches are built to last. They are made from the highest-quality materials and have been rigorously tested for extreme temperatures, vibrations, and shocks. This allows for long-term dependability and reduces the need for replacement, which lowers maintenance costs and delays for railway operators.
4. Precision and Accuracy: Switches call on advanced methods to precisely measure pressure. This helps ensure that systems are running at the right
pressure levels. Keeping pressure within safe limits is crucial for train and railroad equipment safety and efficiency. Even small changes in pressure can lead to serious issues. Accurate pressure control helps keep energy use efficient, reducing fuel consumption and operational costs.
5. Variety of Configuration Options: All configuration options can be tailored to meet the needs of specific railroad applications. Switches are customizable with varying pressure ranges and electrical connections. This allows for seamless integration into existing systems. The flexibility of the pressure switch allows railroad operators to choose the best solution for their specific requirements while optimizing system performance and reliability.
6. Fuel Systems: Pressure sensors are used to monitor the fuel pressure in diesel-powered trains, upholding optimal levels of engine safety and efficacy.
7. Temperature Compensation: Modern pressure sensors often include temperature compensation to account for environmental changes that can affect pressure readings, ensuring more accurate measurements.
8. Real-Time Monitoring: Sensors provide real-time data that operators may use to make informed decisions,
CONTAMINATION CONTROL
improving the overall management of train operations and maintenance. There is no compromise when it comes to the safety and efficiency of trains and railroad equipment. It’s important for leading railroad operators and manufacturers to utilize high-quality pressure switches that demonstrate the necessary expertise, manufacturing innovation, and commitment to excellence.•
Routine and scheduled maintenance of hydraulic systems are vital to getting the most out of your Hitachi Mining Excavator. While maintenance plays the largest role in the prevention of unnecessary machine downtime, it
system to high levels of contamination rapidly decreasing component longevity. The importance of contamination control is sometimes overlooked when performing maintenance due to incorrect practices being used.
THE FLANGELOCK™ TOOL AND CIRCUIT BLANKING CAPS
The FlangeLock™ tool and caps are the ultimate contamination control tools for protecting your hydraulic system. The FlangeLock™ allows for the simple sealing of open hydraulic flanges without tools while the caps can be bolted in place of a flange connection. Easy on, easy off, they offer a leak-proof solution to hydraulic systems and environmental cleanliness. FlangeLock™ tools and caps stop the mess.
HITACHI MAKING CONTAMINATION CONTROL EASY
Hitachi have packaged FlangeLock tool and caps specifically for Hitachi mining excavators. The Hitachi customised kits make sure no matter which component routine maintenance is being performed on, you will always have the exact number of FlangeLocks™* and caps to help reduce contamination.
tools. Constructed from lightweight aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness. FlangeLock™ Tools stop the mess!
*Note: FlangeLocks™ are not to be used under pressure
andthe HOT WATER VDPC
By Dan Helgerson, Technical Editor, Fluid Power Journal
My daughter and son-in-law are very athletic and have 4 highly active boys. Recently, they had to replace their electric water heater. They hoped to have a system that supplied more hot water to feed the demands of the showers and washing machine.
The plumber suggested they increase the temperature setting of the water heater to increase the supply of hot water. This suggestion struck me as kind of strange. How would hotter water at the source provide more hot water for the shower?
Words hold certain meanings and, sometimes, what we call something changes how we think about it. I don’t know about you, but I think of a water heater as just that. But the fact is, it is an energy storage device. It takes water at some ambient temperature and adds energy in the form of heat. This increases the energy density of the water. The water from the cold-water faucet has a very low energy density, while the water in the hot water tank has a relatively high energy density.
Most modern shower heads have a flow-limiting function to reduce the amount of water used. If the temperature setting (energy density) of the water heater is just right for a shower, then the duration of the shower would be limited to the volume of water in the heater. However, if the energy density setting of the water heater is much greater than would be comfortable in the shower, some low energy density (cold) water is added to lower the energy density at the shower head. However, the shower head will only allow a specific flow rate of water. By adding water
with low energy density, less volume is taken from what is stored in the water heater.
The plumber was right! Because there is a fixed maximum flow rate at the shower head, adding water with low energy density reduces the energy density at the shower head and draws less from the stored energy in the water heater. The addition of cold water transforms the high energy density at the heater to the lower energy density required at the shower head. The rate at which energy is taken from the water heater is the same when the heater setting is perfect for the shower, as well as when the heater setting is way too hot.
OK, wait a second! Am I saying that the flow rate of water from the heater is the same in both instances? No! The flow of energy is the same. Energy is the combination of temperature and flow. The high-temperature/ low-flow from the heater was converted to low-temperature/high-flow at the shower head. Energy density is a term that we use in describing the Variable Displacement Power Controller (VDPC).
Much like the high-temperature setting of the water heater, air compressors, receivers, hydraulic pumps, and accumulators all generate or store energy at a higher energy density than is required by the work being done. With fluid power, energy density is not produced by heat, but by pressure. While the shower adjusts the temperature (energy density) by adding cold water, the VDPC adjusts the pressure (energy density) by adding low-pressure fluid from the reservoir or the atmosphere.
Only the amount of energy needed to do the work is drawn from the source. High-pressure/low-flow energy is taken from the source and then transformed to low-pressure/highflow at the actuator.
In my first iteration of this article, I jumped right into the math. I determined the best water temperature and average flow rate for showers. I plugged in my equations for units of energy (UE) and units of power (UP). I used both metric and Imperial units. I made a spreadsheet with all the data. It was great! However, the whole point was to have a simple example to help explain the workings of the VDPC. When I reread what I had written, I realized that only a certain subset of readers would bother to read it. Since I didn't want all that valuable information to go to waste, I am including it below.
BREAKING IT DOWN
gpm/°F) would drain the tank of hot water in 20 minutes.
The same water heater set at 60 °C (159 °F) would have 150 liters × 60 °C = 9,000 UE (40 gallons × 159 °F = 6,341 UE). The tank would hold the same amount of water, but the energy density (heat/unit) would be much greater. However, there is too much energy in the water to be safely used. It is way too hot!
Bear with me now. The amount of energy I need at the shower head is 285 liters/°C (400 gallons/°F) The shower head will only take 7.5 lpm (2 gpm). By adjusting the faucet so that 2.8 lpm (.7 gpm) of cold water (near zero energy density) is added to the shower head, only 4.8 lpm (2.3 gpm) are drawn from the water heater. The power density at the shower head is 4.8 lpm × 60 °C = 285 lpm/°C (0.7 gpm × 159 °F = 200).
Maintaining the correct
One of the functions of the VDPC is to reconfigure the energy density of the fluid to match the energy requirement of the actuator. However, in this case, the energy density is due to pressure, not temperature. The VDPC, in the pressure-reducing mode, takes only the units of energy (UE) from the source that are required by the actuator. It then draws a volume of near-zero energy units from the reservoir to provide the energy density needed by the actuator.
If you read this whole thing, I am proud of you.•
Comments? Reach me at
OPTIMIZING HYDRAULIC POWER UNITS
Enhancing Efficiency, Reducing Costs, and Improving Performance
By Jessica Horn, Product Manager, Bucher Hydraulics North America
When it comes to hydraulics, there are many options available for power units. Companies continually strive to create high-performing power units that are more efficient and cost-effective. Developing new pump and motor technologies is essential in a world where those features are high on an end-user's list. Advanced hydraulic systems can significantly improve the performance and efficiency of a machine. This includes hydraulic presses, injection molding machines, wind turbines, and many other machines.
As is common in many industries, the following questions often arise when new machines or machine upgrades are necessary:
• What can be done to lower maintenance costs?
• How do we save space and manage weight restrictions?
• How do we increase efficiency to make this work in a manner conducive to energy savings?
• Health and safety operators – how can we reduce the volume?
Integrating a power unit with a QXEHX internal gear pump, coupled with a Servo motor, is a solid solution. The power unit will enhance performance and save on maintenance, energy, and space, among many other benefits.
The optimized hydrodynamic lubrication of the QXEHX can aid in reducing maintenance costs due to the improved gear ring and optimized flows, resulting in a longer lifetime. Oil leakage is channeled directly through the shaft of the QXEHX pump. In Figure 1, the oil leakage follows the path of the green arrows, effectively flushing and lubricating the direct drive shaft connection between the pump and the motor before finding its way back to the reservoir. With the direct connection between the motor and pump, traditional pump support and coupling inside a housing are no longer needed, streamlining design, and reducing complexity. This direct connection simplifies the system, improves efficiency, and saves costs by eliminating the need for additional
parts and maintenance or adjustments to typical pump housing and coupling.
1
The typical atmosphere on a production floor can be quite loud. Noise reduction, while not always at the top of the list of requirements, is a benefit on the list of factors considered when designing and implementing a new machine. In a typical office setting, the decibel level is around 60 decibels (dB), while a production floor can range from 80-100 dB at times, even exceeding 100 dB. Even the Occupational Safety and Health Administration (OSHA) requires employers to implement a hearing conservation program when noise exposure is at or above 85 decibels during an 8-hour workday. Hydraulic pumps and motors are designed to be quiet and require no extra sound insulation, significantly impacting the production floor’s environment.
As seen in Figure 2, a sound pressure test was conducted with a QXEHX pump with a displacement of 32.3 cm3 /rev (2 in³ /rev), reaching a peak of 77.5 dB when operating at an outlet pressure of 28 MPa with a shaft speed of 4600 rpm. While each machine has different operating parameter requirements, Figure 2 clearly shows reduced volume. The intricate design of this pump’s internal suction supply reduces the noise level and allows for higher shaft speed.
The QXEHX pump's design also allows for higher shaft speeds. The increased speed allows the lower displacement to maintain the same flow, reducing the torque the motor requires. Using a smaller motor and potentially a more compact inverter saves costs. Additionally, the improved suction conditions and enhanced internal supply reduce the risk of cavitation. The design also minimizes turbulence and pulsations, contributing to lower noise levels. Overall, these advances enhance performance and lead to greater efficiency and a quieter operation.
Performance and efficiency are also top priorities. The QXEHX pump’s wide speed range and exceptionally high maximum speeds (from 2400 - 6050 rpm) enable higher operational speeds, achieving the same volume flow at a reduced displacement volume. These characteristics create optimal conditions for cost optimization, as does flow on demand with variable speed control.
Figure 3 shows the typical load cycle for an injection molding machine. This guarantees efficient operation by providing high flow
Figure
during active phases. It also reduces or stops flow during idle periods, saving energy and reducing wear on components. This type of power unit’s capability for exceptionally fast ramp-up and ramp-down speeds is an attractive feature for applications requiring rapid and precise control. This response ensures that the hydraulic system can quickly shift to changing load demands and other operational requirements. This enhances productivity, as well as efficiency.
Whether a high-speed manufacturing process or a complex motion control system, the QXEHX pump allows for minimized downtime and optimized cycle times. In addition, the pump’s ability to decompress by reversing its rotation adds to the versatility and control of the entire machine’s operation. This ensures safe and efficient pressure release, preventing potential damage to machine components and providing smooth transitions between operational states.
Costs are saved by the elimination of auxiliary circuits such as cooling circuits, kidney loops, and supplement accumulators.
The selection of pumps and motors is critical in achieving optimal machine performance and efficiency. Companies continually innovate to design power units that address the growing customer demand for greater efficiency, increased cost-effectiveness, and heightened reliability and durability. Advanced hydraulic systems can enhance the
performance of a wide range of machinery. As industries evolve, key considerations for machine development consistently emerge, including requirements to reduce maintenance costs, optimize space utilization, improve cycle times for greater efficiency, and address safety concerns such as noise levels. By focusing on these priorities, modern hydraulic technologies are equipped to meet the demands of both manufacturers and end-users alike.•
Advance Your Team’s Fluid Power Expertise with IFPS Live Online Training
» TRAINING YOUR TEAM on critical fluid power techniques, procedures, and essential safety measures can be difficult to schedule. Fortunately, the International Fluid Power Society offers custom technical live online training for groups, making it easier than ever to enhance your team’s skills.
IFPS training programs are fully flexible and virtual, allowing sessions to fit your team’s availability. Conducted online, these interactive live training sessions provide direct engagement with IFPS accredited instructors, ensuring a practical learning experience tailored to your specific fluid power needs.
Whether your team requires instruction in hydraulic, pneumatic procedures or safety compliance, IFPS offers personalized training designed to enhance technical expertise. The live format encourages real-time discussions, questions, and active participation, ensuring a deeper understanding of key concepts.
Invest in your team’s growth with IFPS live online training, and equip them with the knowledge they need to operate efficiently and safely in today’s fluid power industry. For more information or to schedule a session, visit https://ifps.org/ technical-training-contact.
Boost Your Fluid Power Skills—At Your Own Pace
» IN TODAY’S FAST-MOVING world, keeping up with industry knowledge is more important than ever. Whether you’re a seasoned pro looking to sharpen your skills or a student eager to learn the ropes, having a strong understanding of fluid power can set you apart. The challenge? Finding the time to learn.
That’s where IFPS Online Training Modules come in. These self-paced courses cover key topics like hydraulics, pneumatics, and fluid power math—giving you the flexibility to learn whenever it fits your schedule. No rigid
ON L I N E Training Modules
deadlines, no pressure—just a straightforward way to build your expertise.
For professionals, these modules offer a chance to stay up to date with industry advancements. For employers, they’re a great tool to train teams and ensure everyone is on the same page. It’s a win-win for anyone looking to grow in the field. Ready to learn on your own terms? Check out IFPS Online Training Modules and take the next step in your fluid power journey. www. ifps.org/online-training-modules
Newly Certified Professionals
JANUARY 2025
ENGINEER
Bradley Wagner, IFPS
HYDRAULIC SPECIALIST
Robert Caudy, Parker Hannifin
Keegan McVicker, Parker
James Scanlan, Parker
Adrian Slovenec, Parker Hannifin
Darrin Storms, Stonebridge Technical Enterprises
Galen Trostle, Hydra Power Systems
MOBILE HYDRAULIC MECHANIC
Joshua Birch, City of Tukwila
Jeremy Breitung, VDOT
Steve Cox, BPA
Jeremy Grider, BPA
Justin Jackson, Seco
Train at Your Own Pace
Dave Martin, Altec Industries, Inc.
Matt Miner, BPA
Ross Musgrove, BPA
Brian Rodriguez, Altec Industries, Inc.
Robert Schneider, BPA
Justin Spry, Altec Industries, Inc.
Don Voigt, Fire-City of Tacoma
MOBILE HYDRAULIC TECHNICIAN
Jason Cushion, El Paso Electric
PNEUMATIC SPECIALIST
Anthony Smith, Motion Industries
SPECIALIST
Anthony Smith, Motion Industries
IFPS Welcomes Our 2025 President & New Board Members
2025 IFPS President Garrett Hoisington, CFPAI, CFPS, CFPMHM » MY PASSION for learning drives my commitment to both personal and professional growth. I believe that who I am today is shaped by the diverse experiences and lessons I've encountered throughout my life.
Growing up, I immersed myself in outdoor activities, particularly golf, where I played extensively in the Arizona Junior Golf Association and was a proud member of the 3A Arizona State Championship Golf team. These experiences instilled in me essential values of individual accountability and integrity.
After high school, I pursued my education at Eastern Arizona College and completed a real estate course at Hogan School of Real Estate in Tucson. I earned my real estate license at just 19 and simultaneously began my journey to obtain a pilot’s certificate. Over the next two decades, I accumulated over 2,000 hours of flight experience, achieving multi-engine, instrument, and commercial pilot ratings.
At 21, I moved to northern Nevada to manage our branch location, facing the challenges of establishing market traction. Those ten formative years taught me invaluable lessons in leadership and resilience, ultimately leading to our location's ongoing success. During this time, I earned my first certification from the International Fluid Power Society as a Certified Fluid Power Hydraulic Specialist, later becoming a CFP Accredited Instructor. In this role, I was privileged to support my colleagues in achieving their certifications, alongside earning various technical qualifications, including a Six Sigma Black Belt.
In 2008, I became Vice President of Open Loop Energy, Inc., focusing on technical services and contributing to the development of a pioneering control system for the mining industry aimed at conserving water and enhancing road maintenance. Our team successfully patented this system in 2010, and I was honored to be listed as a co-inventor. This innovation enabled me to travel to various mines across the USA, as well as in Chile and Australia, and facilitated installations in multiple countries, establishing our system as a leader in the market.
In 2019, I took on the role of President and CEO of Open Loop Energy, Inc., alongside my brothers, acquiring the company from our parents. Under our leadership, we doubled the company’s revenue from $20 million to $40 million, expanded our capabilities, and successfully acquired two businesses—one in New Mexico and a manufacturing facility in California, which we relocated to Willcox, AZ. Recently, my brother Tate and I transitioned our interests in Open Loop Energy to our remaining siblings, and we are excited to explore new opportunities. Additionally, I am honored to have been elected President of the International Fluid Power Society for 2025, and I look forward to contributing to the organization in the years to come.
The New Directors-At-Large
Tyler Janesek, CFPHS (U) ENGINEERING SYSTEMS, INC.
» IN SCHOOL, I never had much exposure to fluid power systems. It wasn't until my first job that I was introduced to fluid power and how powerful it could be, both literally and figuratively. It was at that job that I was introduced to IFPS through their industry certifications and trainings. They were able to help me build a strong foundation which I've used to design, build, and troubleshoot different fluid power systems. I'm excited to be part of the board and to keep IFPS and all its members moving forward.
Alex Kummer, CFPE, (M) NATIONAL OILWELL VARCO
» ALEX KUMMER
P. Eng, CFPE, CFPS, CFPHS, CFPPS, CFPCC earned his bachelor’s degree in mechanical engineering from East Kazakhstan Technical University in 1989 and continued his studies at the Technical Academy in Wuppertal, Germany.
He designed various Xelan forklifts and sideloaders, including the world’s first sideloader with all steering wheels, displayed at the 1997 CEBIT-MESSE in Hanover. He also developed pneumatic tools for the German automotive industry.
In 2007, he joined IFPS, which boosted his hydraulic engineering career.
After moving to Edmonton, Canada, he worked for TTS-Sense / TTS-Marine, designing, implementing, and servicing hydraulic systems for Rack & Pinion Drilling Rigs, hydraulic Top Drives, Catwalks, and 2000 HP hydraulic HPUs.
In 2011, he joined Weatherford, where he developed hydraulic, pneumatic, and cooling systems for a new Bakersfield Corod plant in California.
Since 2014, he has been working for NOV as a Senior Hydraulic Engineer, designing different types of oilfield components, including BOP Control Units and Iron Roughnecks.
He resides in Edmonton, Canada, with his wife and has four children and two grandchildren. He enjoys outdoor living, fishing, and camping. His hobbies include robotics and building CNC machines.
Kyler Craig Ridgeway,
CFPHS (OEM) BRADBURY COMPANY
» WITH 11 YEARS of experience in the fluid power industry, Kyler Ridgeway specializes in both mobile and industrial hydraulic systems. His primary focus is on reducing the energy footprint of hydraulic systems to align with modern technological advancements. Currently, he designs industrial hydraulic systems at The Bradbury Group, where he has worked for the past six years. Before that, he spent five years at B&B Hydraulics, gaining extensive hands-on experience in mobile hydraulic systems. Kyler holds a Certified Fluid Power Hydraulic Specialist (CFPHS) certification and contributed to the Heavy Equipment Power Trains and Systems 1st Edition course book, helping to educate future professionals in the field.
Quest Duperron,
CFPIHM, CFPCC (D) COASTAL HYDRAULICS, INC.
» “AFTER TAKING one course to obtain a hydraulic certification, I quickly realized that IFPS was actively bridging the gap between theoretical and OEM-specific training, something I needed to be a part of. This gap is a void that is all too present in the real world and empowers technicians at a fundamental level.”
Individuals wishing to take any IFPS written certification tests can select from convenient locations across the United States and Canada. IFPS is able to offer these locations through its affiliation with the Consortium of College Testing Centers provided by National College Testing Association. Contact Kyle Pollander at Kpollander@ifps.org if you do not see a location near you. Every effort will be made to accommodate your needs.
Written Certification Test Locations
Alabama Auburn, AL Birmingham, AL Calera, AL Decatur, AL Huntsville, AL Jacksonville, AL Mobile, AL Montgomery, AL Normal, AL Tuscaloosa, AL
Alaska Anchorage, AK Fairbanks, AK
Arizona Flagstaff, AZ Glendale, AZ Mesa, AZ Phoenix, AZ Prescott, AZ Scottsdale, AZ Sierra Vista, AZ Tempe, AZ Thatcher, AZ Tucson, AZ Yuma, AZ
TENTATIVE TESTING DATES FOR ALL LOCATIONS
APRIL 2025
Tuesday 4/8 • Thursday 4/24
MAY 2025
Tuesday 5/6 • Thursday 5/22
JUNE 2025
Tuesday 6/10 • Thursday 6/26
JULY 2025
Tuesday 7/8 • Thursday 7/24
JOB PERFORMANCE TEST LOCATIONS
Arizona California Colorado Florida Georgia Maine Michigan Minnesota Montana New Jersey Nova Scotia Pennsylvania Texas Washington Wyoming Western Australia
Arkansas Bentonville, AR Hot Springs, AR Little Rock, AR California Aptos, CA Arcata, CA Bakersfield, CA Dixon, CA Encinitas, CA Fresno, CA Irvine, CA Marysville, CA Riverside, CA Salinas, CA San Diego, CA San Jose, CA San Luis Obispo, CA Santa Ana, CA Santa Maria, CA Santa Rosa, CA Tustin, CA Yucaipa, CA Colorado Aurora, CO Boulder, CO Springs, CO Denver, CO Durango, CO Ft. Collins, CO Greeley, CO Lakewood, CO Littleton, CO Pueblo, CO
Delaware Dover, DE Georgetown, DE Newark, DE
Florida
Avon Park, FL
Boca Raton, FL Cocoa, FL Davie, FL
Daytona Beach, FL
Fort Pierce, FL Ft. Myers, FL Gainesville, FL Jacksonville, FL
Miami Gardens, FL Milton, FL
New Port Richey, FL Ocala, FL Orlando, FL
Panama City, FL
Pembroke Pines, FL
Pensacola, FL
Plant City, FL Riviera Beach, FL Sanford, FL
Tallahassee, FL Tampa, FL
West Palm Beach, FL
Georgia
Albany, GA
Athens, GA
Atlanta, GA
Carrollton, GA
Columbus, GA
Dahlonega, GA
Dublin, GA
Dunwoody, GA
Forest Park, GA
Lawrenceville, GA
Morrow, GA
Oakwood, GA
Savannah, GA
Statesboro, GA
Tifton, GA
Valdosta, GA
Hawaii Laie, HI
Idaho
Boise, ID
Coeur d ‘Alene, ID
Idaho Falls, ID
Lewiston, ID
Moscow, ID
Nampa, ID
Rexburg, ID
Twin Falls, ID
Illinois
Carbondale, IL
Carterville, IL
Champaign, IL
Decatur, IL
Edwardsville, IL
Glen Ellyn, IL
Joliet, IL
Malta, IL
Normal, IL
Peoria, IL
Schaumburg, IL
Springfield, IL
University Park, IL
Indiana
Bloomington, IN
Columbus, IN
Evansville, IN
Fort Wayne, IN
Gary, IN
Indianapolis, IN
Kokomo, IN
Lafayette, IN
Lawrenceburg, IN
Madison, IN
Muncie, IN
New Albany, IN
Richmond, IN
Sellersburg, IN
South Bend, IN
Terre Haute, IN
Iowa Ames, IA
Cedar Rapids, IA
Iowa City, IA
Ottumwa, IA
Sioux City, IA
Waterloo, IA
Kansas
Kansas City, KS
Lawrence, KS
Manhattan, KS
Wichita, KS
Kentucky Ashland, KY
Bowling Green, KY
Erlanger, KY
Highland Heights, KY
Louisville, KY
Morehead, KY
Louisiana
Bossier City, LA
Lafayette, LA
Monroe, LA
Natchitoches, LA
New Orleans, LA
Shreveport, LA
Thibodaux, LA
Maryland
Arnold, MD
Bel Air, MD
College Park, MD
Frederick, MD
Hagerstown, MD
La Plata, MD
Westminster, MD
Woodlawn, MD
Wye Mills, MD
Massachusetts
Boston, MA
Bridgewater, MA
Danvers, MA
Haverhill, MA
Holyoke, MA
Shrewsbury, MA
Michigan
Ann Arbor, MI
Big Rapids, MI
Chesterfield, MI
Dearborn, MI
Dowagiac, MI
East Lansing, MI
Flint, MI
Grand Rapids, MI
Kalamazoo, MI
Lansing, MI
Livonia, MI
Mount Pleasant, MI
Sault Ste. Marie, M
Troy, MI
University Center, MI
Warren, MI
Minnesota
Alexandria, MN
Brooklyn Park, MN
Duluth, MN
Eden Prairie, MN
Granite Falls, MN
Mankato, MN
Mississippi
Goodman, MS
Jackson, MS
Mississippi State, MS
Raymond, MS
University, MS
Missouri
Berkley, MO
Cape Girardeau, MO
Columbia, MO
Cottleville, MO
Joplin, MO
Kansas City, MO
Kirksville, MO
Park Hills, MO
Poplar Bluff, MO
Rolla, MO
Sedalia, MO
Springfield, MO
St. Joseph, MO
St. Louis, MO
Warrensburg, MO
Montana
Bozeman, MT
Missoula, MT
Nebraska Lincoln, NE
North Platte, NE
Omaha, NE
Nevada
Henderson, NV
Las Vegas, NV
North Las Vegas, NV
Winnemucca, NV
New Jersey
Branchburg, NJ
Cherry Hill, NJ
Lincroft, NJ
Sewell, NJ
Toms River, NJ
West Windsor, NJ
New Mexico Albuquerque, NM
Clovis, NM
Farmington, NM
Portales, NM
Santa Fe, NM
New York
Alfred, NY
Brooklyn, NY
Buffalo, NY
Garden City, NY
New York, NY
Rochester, NY
Syracuse, NY
North Carolina Apex, NC
Asheville, NC
Boone, NC
Charlotte, NC
China Grove, NC
Durham, NC
Fayetteville, NC
Greenville, NC
Jamestown, NC
Misenheimer, NC
Mount Airy, NC
Pembroke, NC
Raleigh, NC
Wilmington, NC
North Dakota
Bismarck, ND
Ohio Akron, OH
Cincinnati, OH
Cleveland, OH
Columbus, OH
Fairfield, OH
Findlay, OH
Kirtland, OH
Lima, OH
Maumee, OH
Newark, OH
North Royalton, OH
Rio Grande, OH
Toledo, OH
Warren, OH
Youngstown, OH
Oklahoma Altus, OK
Bethany, OK
Edmond, OK
Norman, OK
Oklahoma City, OK
Tonkawa, OK
Tulsa, OK
Oregon Bend, OR Coos Bay, OR Eugene, OR
Gresham, OR
Klamath Falls, OR
Medford, OR
Oregon City, OR
Portland, OR
White City, OR
Pennsylvania Bloomsburg, PA Blue Bell, PA
Gettysburg, PA
Harrisburg, PA
Lancaster, PA
Newtown, PA
Philadelphia, PA Pittsburgh, PA
Wilkes-Barre, PA York, PA
South Carolina
Beaufort, SC
Charleston, SC
Columbia, SC
Conway, SC
Graniteville, SC
Greenville, SC Greenwood, SC Orangeburg, SC
Rock Hill, SC
Spartanburg, SC
Tennessee Blountville, TN
Clarksville, TN
Collegedale, TN
Gallatin, TN
Johnson City, TN
Knoxville, TN
Memphis, TN
Morristown, TN
Murfreesboro, TN
Nashville, TN
Texas
Abilene, TX
Arlington, TX
Austin, TX
Beaumont, TX
Brownsville, TX
Commerce, TX
Corpus Christi, TX
Dallas, TX
Denison, TX
El Paso, TX
Houston, TX
Huntsville, TX
Laredo, TX
Lubbock, TX
Lufkin, TX
Mesquite, TX
San Antonio, TX
Victoria, TX
Waxahachie, TX
Weatherford, TX
Wichita Falls, TX
Utah Cedar City, UT
Kaysville, UT
Logan, UT
Ogden, UT
Orem, UT
Salt Lake City, UT
Virginia
Daleville, VA
Fredericksburg, VA
Lynchburg, VA
Manassas, VA
Norfolk, VA
Roanoke, VA
Salem, VA
Staunton, VA
Suffolk, VA
Virginia Beach, VA
Wytheville, VA
Washington
Auburn, WA
Bellingham, WA
Bremerton, WA
Ellensburg, WA
Ephrata, WA
Olympia, WA
Pasco, WA
Rockingham, WA
Seattle, WA
Shoreline, WA
Spokane, WA
West Virginia
Ona, WV
Wisconsin
La Crosse, WI
Milwaukee, WI
Mukwonago, WI
Wyoming
Casper, WY
Laramie, WY
Torrington, WY
CANADA
Alberta
Calgary, AB
Edmonton, AB
Fort McMurray, AB
Lethbridge, AB
Lloydminster, AB Olds, AB Red Deer, AB
British Columbia Abbotsford, BC
Burnaby, BC
Castlegar, BC
Delta, BC
Kamloops, BC
Nanaimo, BC
Prince George, BC Richmond, BC Surrey, BC
Vancouver, BC
Victoria, BC
Manitoba Brandon, MB
Winnipeg, MB
New Brunswick Bathurst, NB Moncton, NB
Newfoundland and Labrador
St. John’s, NL
Nova Scotia Halifax, NS
Ontario
Brockville, ON Hamilton, ON London, ON Milton, ON Mississauga, ON Niagara-on-the-Lake, ON
North Bay, ON North York, ON Ottawa, ON Toronto, ON Welland, ON Windsor, ON
Quebec
Côte Saint-Luc, QB Montreal, QB
Saskatchewan Melfort, SK
Moose Jaw, SK
Nipawin, SK
Prince Albert, SK Saskatoon, SK
Yukon Territory Whitehorse, YU
UNITED KINGDOM
Elgin, UK
GHAZNI
Kingdom of Bahrain, GHA Thomasville, GHA
EGYPT Cairo, EG
JORDAN Amman, JOR
NEW ZEALAND Taradale, NZ
Wildwood, FL
Winter Haven, FL
CFPAI
Certified Fluid Power Accredited Instructor
CFPAJPP
Certified Fluid Power Authorized Job Performance Proctor
CFPAJPPCC
Certified Fluid Power Authorized Job Performance Proctor Connector & Conductor
CFPE
Certified Fluid Power Engineer
CFPS
Certified Fluid Power Specialist (Must Obtain CFPHS & CFPPS)
CFPHS
Certified Fluid Power Hydraulic Specialist
CFPPS
Certified Fluid Power Pneumatic Specialist
CFPECS
Certified Fluid Power Electronic Controls Specialist
CFPMT
Certified Fluid Power Master Technician (Must Obtain CFPIHT, CFPMHT, & CFPPT)
CFPIHT
Certified Fluid Power
Industrial Hydraulic Technician
CFPMHT
Certified Fluid Power
Mobile Hydraulic Technician
CFPPT
Certified Fluid Power Pneumatic Technician
CFPMM
Certified Fluid Power Master Mechanic
(Must Obtain CFPIHM, CFPMHM, & CFPPM)
CFPIHM
Certified Fluid Power
Industrial Hydraulic Mechanic
CFPMHM
Certified Fluid Power Mobile Hydraulic Mechanic
CFPPM
Certified Fluid Power Pneumatic Mechanic
CFPMIH
Certified Fluid Power
Master of Industrial Hydraulics
(Must Obtain CFPIHM, CFPIHT, & CFPCC)
CFPMMH
Certified Fluid Power
Master of Mobile Hydraulics (Must Obtain CFPMHM, CFPMHT, & CFPCC)
CFPMIP
Certified Fluid Power
Master of Industrial Pneumatics
(Must Obtain CFPPM, CFPPT, & CFPCC)
CFPCC
Certified Fluid Power
Connector & Conductor
CFPSD
Fluid Power System Designer
CFPSA
Certified Fluid Power Support Associate
Tentative Certification Review Training
IFPS offers onsite review training for small groups of at least 10 persons. An IFPS accredited instructor visits your company to conduct the review. Contact kpollander@ifps.org for details of the scheduled onsite reviews listed below.
FLUID POWER SUPPORT ASSOCIATE
» CFC Industrial Training – Fairfield, Ohio | May 5–8, 2025 | December 1–4, 2025
HYDRAULIC
SPECIALIST
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org)
» CFC Industrial Training – Fairfield, Ohio | May 19–23, 2025 | October 20–24, 2025
ELECTRONIC CONTROLS SPECIALIST
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
PNEUMATIC SPECIALIST
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org)
» CFC Industrial Training – Fairfield, Ohio | August 4–8, 2025
CONNECTOR & CONDUCTOR
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
» CFC Industrial Training – Fairfield, Ohio | July 15–17, 2025
MOBILE HYDRAULIC MECHANIC
For custom training IFPS inquiries, please contact Bj Wagner (bwagner@ifps.org)
Online Mobile Hydraulic Mechanic certification review for written test is offered through CFC Industrial Training. This course surveys the MHM Study Manual (6.5 hours) and every outcome to prepare you for the written test. Members may e-mail for a 20% coupon code off the list price. Test fees are not included.
» CFC Industrial Training – Fairfield, Ohio | June 23–27, 2025 | October 13–17, 2025
INDUSTRIAL HYDRAULIC MECHANIC
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
» CFC Industrial Training – Fairfield, Ohio | June 2–6, 2025
INDUSTRIAL HYDRAULIC TECHNICIAN
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
» For dates, call CFC Industrial Training at (513) 874-3225 or visit www.cfcindustrialtraining.com.
MOBILE HYDRAULIC TECHNICIAN
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
PNEUMATIC TECHNICIAN & PNEUMATIC MECHANIC
For custom IFPS training inquiries, please contact Bj Wagner (bwagner@ifps.org).
» For dates, call CFC Industrial Training at (513) 874-3225 or visit www.cfcindustrialtraining.com.
CALCULATING PEAK FLOW
The flow rate to power air cylinders is computed for a specific operating pressure on the cylinder rather than from available air pressure at the compressor, which must be higher than is required to power the circuit. Thus, the operating pressure must always be higher than the load required pressure to account for frictional forces and for acceleration to a desired velocity or stroke distance per unit of time. Do not use the outlet pressure at the compressor because there will be pressure drops through
the lines, valves, and other components that will reduce the available pressure at the cylinder. If there is a significant difference in the force requirements between extension and retraction, then the use of a dual pressure system should be considered to save energy. This operating pressure at the cylinder is the value used in the Compression Ratio (CR) calculation for the formulae outline below when calculating peak air flow demand. The CR factor in the equation determines what the free air requirement is for a given air
flow demand. Again, lpm (cfm) refers to compressed air flow (displaced volume) in the cylinder and Nlpm (scfm) refers to air flow at standard conditions.
The stroke times or speed of the cylinder extending and retracting are important factors in calculating the peak air flow demand in nlpm (scfm) and this assists in calculating what the possible cycle rate could be. The
Solving for the peak air flow rate/demand to power an air cylinder with extension and retraction forces and cylinder speeds specified is a four step process:
1.
Determine the pressure in each end of the cylinder to move the load, calculate the load ratio, and select the appropriate size cylinder to satisfy the load ratio guidelines.
2.
3.
4.
Determine the required stroke times based on the machine cycle requirements. This translates into a theoretical minimum speed that must be achieved.
Solve for lpm/cfm based on the areas of the cylinder (extending and retracting) and the velocity.
Convert lpm/cfm to Nlpm/scfm by adjusting for the compression ratio at the cylinder.
This information regarding the load pressures and flow rates may be used in calculating the directional control valve C v necessary to size directional valve, connecting lines, and auxiliary components (filter/regulator, quick exhaust valves, and mufflers) if applicable.
It is important that the peak air flow rates/ demand be used for sizing rather than the air consumption rates, as they are different and could lead to significantly undersizing the lines and valves. Undersizing would result in large pressure drops, would impact performance, and result in energy losses.•
TEST YOUR SKILLS 1
extends through a 24 inch stroke while producing a 400
force, and retracts through the same stroke producing a 500 lb force. If extension time is 2 seconds and retraction time is 3 seconds. How many scfm are required to power the air cylinder? Friction forces are included in the values given. Operations are occurring at sea level and only one pressure regulator is being used. Load ratio of cylinder is approximately 53% during extension and 75% while retracting.
a. 14 scfm extending and 24 scfm retracting.
b. 16 scfm extending and 21 scfm retracting.
c. 18 scfm extending and 19 scfm retracting.
d. 24 scfm extending and 14 scfm retracting.
e. 27 scfm extending and 12 scfm retracting.
Eliminating Hose Breakage Due to Driver Error
WITH SELF-CONTAINED WASTE COMPACTORS
By Brad Longmuir, Sales Manager, Holmbury Inc.
Broken hydraulic hoses and forgotten disconnections are common and costly problems for drivers who pick up and drop off self-contained waste compactors. These compactors are typically found in industries like restaurants, manufacturing, and universities, where they rely on hydraulic lines and quick disconnect couplers for operation. However, during the pickup process, drivers often forget to disconnect the hydraulic lines from the compactor's power unit. This oversight can lead to serious damage to both the compactor and the truck, resulting in expensive repairs, operational downtime, and disrupted waste management schedules. By taking preventive measures, companies can avoid costly repairs, maintain uninterrupted operations, and improve driver accountability.
Prevent Costly Mistakes Using a Waste Bracket Coupler
Self-contained commercial waste compactors are an excellent solution for businesses that need to handle waste efficiently and cleanly. These compactors are highly versatile
and capable of managing both wet and dry waste. They are ideal for businesses dealing with large volumes of waste, including food waste and other liquid-heavy materials, plastic, cardboard, paper, textiles, and damaged or expired products. Their ability to compact a wide range of materials makes them a practical solution for various industries. They can compress the volume of wet waste by up to 75%. This helps to reduce the mess, odor, and inefficiencies associated with traditional waste disposal methods.
By integrating the compactor and container into one unit, these systems prevent the leakage of liquids and odors during transport to the landfill. These units also discourage scavengers from rummaging through waste. The power unit of the compactor stays securely on-site while the container is hauled away via a roll-off truck, simplifying the disposal process.
The Risk of Drive-Off Errors
When a driver forgets to disconnect the hydraulic lines, they can unintentionally cause up to $5,000 in damage each time a drive-off error occurs. Damages to the hydraulic power unit or hoses, as well as the safety hazards created by dragging the unit behind the truck, are just some of the consequences. Additionally, hydraulic fluid spills can harm the environment and lead to costly EPA violations.
The Solution: Waste Bracket Couplers
The use of a new Waste Bracket Coupler can eliminate costly and frustrating drive-off issues caused by broken hydraulic lines due to operator neglect. For example, in industries like waste management or manufacturing, where time-sensitive operations depend on reliable equipment, a single drive-off incident can result in significant downtime and repair costs. The mounted bracket has ISO16028 female couplers in 3/8” and 1/2" sizes, which
can rotate both horizontally and vertically, and have the female sleeves mounted in the bracket to achieve the breakaway feature. These ISO16028 couplers can accept both standard and connect-under-pressure male couplers that are ISO16028 compliant. The innovative “breakaway” feature ensures that if a driver forgets to disconnect the hydraulic lines, the couplers will safely disengage without causing damage. The use of ISO16028 flat-face couplers will ensure that there is no fluid spillage during connection or disconnection, even in the event of a drive-off. This helps to maintain environmental safety and workplace cleanliness.
The connect-under-pressure male couplers will allow for connection to the truck even if there is trapped pressure in the hydraulic lines on the truck. In situations where trapped pressure in the truck’s hydraulic lines would
normally delay reconnection, the connect-under-pressure male couplers allow operators to quickly resume operations without hassle. This thoughtful design not only reduces the risk of equipment damage but also minimizes downtime, keeping operations running smoothly and efficiently.
Easy Installation and Safe Operation
The bracket component of the Waste Bracket Coupler features mounting holes
that allow for easy installation. The ISO16028 specification was written around a specific design, making it an ideal fit for many fleets. The use of this Coupler helps eliminate downtime due to spills or broken hydraulic lines. It also helps customers avoid hydraulic fluid spills, which is particularly valuable for those who have had issues. Additionally, it provides a safer way to ensure that the hoses can disconnect from the self-contained waste compactor, saving ample time and money for any company that utilizes it. •
Learn what’s at HAWE!
HAWE Hydraulik is announcing a new expanded cartridge valve offering! In addition to HAWE’s traditional cartridge valves, PMVE, RK, CLHV, OSCA, BVE, and CDK, we now have many more cartridge valves with a wide range of flows and in a variety of cavities including the most popular T-**A and SAE cavities.
Advantages and benefits:
■ High degree of interchangeability.
■ Highly engineered and reliable components.
■ Flexible solutions in customized manifolds.
■ Cost competitive solutions.
■ Stocked locally in Bethlehem, PA.
■ Perform same pressure, flow, and directional control functions as conventional hydraulic valves.
HAWE Hydraulik manufactures the highest quality hydraulic components, constructed to minimize space and maximize product durability for the mobile, industrial, marine, and oilfield markets.
HAWE is your complete custom hydraulic solution provider! www.HAWE.com | info@haweusa.com | 704-509-1599
Learn More:
In Stock, Cost Conscious.
OFF-HIGHWAY
Aggressive Hydraulics Inc.
18800 Ulysses St N.E.
6K Products
1006 143rd Ave SE Tenino, WA 98589
P: 360-264-2141
F: 360-264-5105
E: sales@6kproducts.com
W: 6kproducts.com
AA1 Manifold Supply PO Box 18 Spring Lake, MI 49456
P: 616-296-9165
W: a1manifolds.com
AAA Products International
7114 Harry Hines Blvd. Dallas, TX 75235
P: 214-357-3851
F: 214-357-7223
E: info@aaaproducts.com
W: aaaproducts.com
Aalborg Instruments 20 Corporate Drive Orangeburg, NY 10962
P: 845-770-3000
F: 845-770-3010
E: info@aalborg.com
W: aalborg.com
Aberdeen Dynamics 17717 East Admiral Place Tulsa, OK 74158
P: 918-437-8000
F: 918-437-8420
E: sales@aberdeendynamics.com
W: aberdeendynamics.com
Ace Pump Corporation
1650 Channel Avenue
PO Box 13187 Memphis, TN 38113
P: 800-843-2293
F: 901-774-6147
E: sales@acepumps.com
W: AcePumps.com
ADACONN
538 Township Line Rd. Blue Bell, PA 19422
P: 215-643-1900
F: 215-643-4017
E: sales@adaconn.com
W: adaconn.com
Adsens Tech, Inc. 18310 Bedford Cir. Industry, CA 91744
P: 626-854-2772
F: 626-854-8183
E: sales@adsens.net
W: adsens.net
Advanced Cylinders, LLC
8966 Benson Ave. Ste C Montclair, CA 91763
P: 909-920-6437
F: 909-498-3712
E: sam@advancedcylindersllc.com
W: advancedcylindersllc.com
Advanced Fluid Systems, Inc.
245 Campbell Rd York, PA 17402
P: 717-757-1068
F: 717-757-4915
E: sales@advancedfluidsytems.com
W: advancedfluidsystems.com
Advanced Machine and Engineering
2500 Latham St. Rockford, IL 61103
P: 815-962-6076
F: 815-962-6483
E: info@ame.com
W: ame.com
P.O. Box 187 Cedar, MN 55011
P: 763-792-4000
F: 763-792-4400
E: sales@aggressivehydraulics.com
W: aggressivehydraulics.com
Aignep USA 7121 Loblolly Pine Blvd Fairview, TN 37062
P: 615-771-6650
F: 615-771-0926
E: service@aignepusa.com
W: aignepusa.com
Air and Hydraulic Equip 821 E 11th Street Chattanooga, TN 37404
P: 800-277-4466
F: 423-756-2084
E: airandhydraulicequipment@ aheinfo.com
W: aheinfo.com
Air & Hose Source 1680 Illinois Ave. Suite 14 Perris, CA 92571
P: 951-928-0011
F: 951-928-0019
E: hoser1@airandhosesource.com
W: https://www. hydraulichosesources.com/
Airline Hydraulics 3557 Progress Dr. Bensalem, PA 19020
P: 215-638-4700
F: 215-638-1707
E: sales@airlinehyd.com
W: airlinehyd.com
Airmo Inc. Pressure Technologies 9445 Evergreen Blvd. NW Minneapolis, MN 55433
P: 1-763-786-0000
F: 1-763-786-4622
E: airmo@airmo.com W: airmo.com
Airotronics
2747 Route 20 E. Cazenovia, NY 13035
P: 315-655-8476 F: 315-655-3862
E: info@pelcocaz.com W: airotronics.com
Airoyal Div. of Delta Sales 1355 Route 23 Butler, NJ 07405
P: 973-838-0371 F: 973-838-2638
E: info@airoyal.com W: airoyal.net
Air-Way Manufacturing Company 586 N. Main St. Olivet, MI 49076
P: 800-253-1036 F: 269-749-2025 E: sales@air-way.com W: air-way.com
Aitech Defense Systems 19756 Prairie Street Chatsworth, CA 91311
P: 888-248-3248
F: 818-718-9787
E: dpatterson@rugged.com W: rugged.com
AKG Thermal Systems 809 Mattress Factory Road Mebane, NC 27302
P: 919-563-4871 F: 910-640-2233
E: sales@akgts.com W: akgts.com
ALA Industries Limited
(Yuken/Settima/Vivoil/Fluid Press) 1150 Southpoint Circle, Suite D Valparaiso, IN 46385
P: 877-419-8536
F: 219-477-4194
E: info@alaindustrieslimited.com W: alaindustrieslimited.com
Alemite LLC
5148 North Hanley Rd. St. Louis, MO 63134
P: 866-4-alemite
F: 800-648-3917
E: feedback@alemite.com
W: alemite.com
Alkon Corp.
728 Graham Dr. Fremont, OH 43420
P: 419-333-7000
E: sales@alkoncorp.com
W: alkoncorp.com
Allegheny York
3995 N. George St. Ext Manchester, PA 17345
P: 717-266-6617
F: 717-266-6371
E: sales@alleghenyyork.com W: alleghenyyork.com
Allied Fluid Conditioners
536 Township Line Road Blue Bell, PA 19422
P: 215-643-0966
F: 215-643-4017
E: sales@alliedfluidconditioners.com
W: alliedfluidconditioners.com
Allied Metrics Seals and Fasteners, Inc. 2 Wilson Drive Sparta, NJ 07871
P: 973-383-2487
F: 973-383-3329
E: alliedmetrics@nac.net W: alliedmetrics.com
Alloys & Components, SW 2525 Sea Harbor Rd. Dallas, TX 75212
P: 214-637-9301
F: 214-637-9303
E: sales@alloysandcomponents.com W: alloysandcomponents.com
Almo Manifold & Tool Co.
777 Aulerich PO Box 112 East Tawas, MI 48730
P: 989-984-0800
F: 989-984-0830
E: sales@almomanifold.com W: almomanifold.com
Alumi-Tec Inc. PO Box 753 Grand Haven, MI 49417
P: 800-327-7558
F: 616-846-1984
E: Service@alumitecmanifolds.com
W: alumitecmanifolds.com
American Chemical Technologies, Inc. 1892 Hydraulic Drive Howell, MI 48855
P: 866-945-1041
E: info@americanchemical.com W: americanchemtech.com
American Cylinder Co., Inc. 481 S. Governors Hwy. Peotone, IL 60468-9116
P: 708-258-3935 F: 708-258-3980 E: amcyl@americancylinder.com W: americancylinder.com
Ametek Factory Automation 1080 N. Crooks Rd. Clawson, MI 48017
P: 248-435-0700 F: 248-435-8120 E: gemco@ametek.com W: ametekfactoryautomation.com
AMETEK Vehicular Instrumentation Systems (VIS) 287 27 Road Grand Junction, CO 81503
P: 970-242-8863 F: 970-245-6267 E: info.dixson@ametek.com W: ametekvis.com
Amphenol Industrial Operations 40-60 Delaware Ave. Sidney, NY 13838 P: 607-563-5088 F: 607-563-5157 E: mhartman@amphenol-aio.com W: amphenol-industrial.com
Anchor Coupling Inc. 5520 13th St. Menominee, MI 49858 P: 906-864-1117 F: 906-863-3242 E: clark_gail_r@anchorcoupling.com W: anchorcoupling.com
Anchor Fluid Power 5553 Murray Road Cincinnati, OH 45227 P: 513-527-4444 F: 513-527-4449 E: Sales@Anchorfluidpower.com W: AnchorFluidPower.com
Anderson Fittings 4325 Frontage Rd. Oak Forest, IL 60452 P: 800-323-5284 F: 708-535-9083 E: dchristensen@andersonfittings. com W: andersonfittings.com
APEM, Inc. 970 Park Center Vista, CA 92081 P: 760-598-2518 E: info@apem.com/us W: apem.com/us/
Apex Hydraulic & Machine, Inc. 2859 Philipsburg Bigler Highway Philipsburg, PA 16866 P: 814-342-1010 F: 814-342-9732 E: apexhyd5@gmail.com
API Heat Transfer 2777 Walden Ave. Buffalo, NY 14225
P: 716-684-6700 F: 716-684-2155
W: apiheattransfer.com
API Heat Transfer – Airtech Division 91 North Street Arcade, NY 14009
P: 585-496-5755
F: 585-496-5776
E: froy@apiheattransfer.com
W: apiheattransfer.com
APM HEXSEAL 44 Honeck Street Englewood, NJ 07631
P: 201-567-5700
F: 201-567-4106
E: info@apmhexseal.com
W: apmhexseal.com
Appalachian Fluid Power, Inc. 3364 State Rte. 31 Acme, PA 15610
P: 724-593-8333 F: 724-593-8334
Emal: salesdesk.afp@gmail.com W: appalachianfluidpower.com
Apple Rubber Products Inc. 310 Erie Street
Lancaster, NY 14086
P: 716-684-6560
F: 716-684-8302
W: applerubber.com
Application Equipment W209N17341 Industrial Drive Jackson, WI 53037
P: 262-238-9900 F: 262-674-1682
E: apemeq@appequip.com W: appequip.com
Applied Energy Company, LLC. 1205 Venture Court Suite #100 Carrolton, TX 75006
P: 214-355-4200 F: 214-355-4201
E: mark.scott@appliedenergyco.com W: appliedenergyco.com
Applied Industrial Corporate Headquarters One Applied Plaza Cleveland, OH 44115
P: 877-279-2799 W: applied.com
ARGO-HYTOS Inc.
1835 N. Research Dr., PO Box 28 Bowling Green, OH 43402
P: 419-353-6070 F: 419-354-3496
E: info.us@argo-hytos.com W: argo-hytos.com
Ark-Plas Products, Inc. 165 Industry Lane Flippin, AR 72634 P: 870-453-2343 F: 870-568-0811
E: info@ark-plas.com W: ark-plas.com
ASA Hydraulik 160 Meister Ave. #20 Branchburg, NJ 08876
P: 800-473-9400 F: 908-541-1550
E: sales@asahyd.com W: asahyd.com
Ashcroft Inc. 250 East Main Street Stratford, CT 06614
P: 1-800-328-8258
E: info@ashcroft.com W: ashcroft.com
Assured Automation 263 Cox St Roselle, NJ 07203
P: 800-899-0553 F: 732-381-2328
E: info@assuredautomation.com W: assuredautomation.com
Atlantic Hydraulics LLC
P.O. Box 787
1911 NC Highway 902 Pittsboro, NC 27512
P: 800-682-8848
F: 919-542-4677
E: sales@atlantic-hydraulics.com W: atlantic-hydraulics.com
Atlas Copco Compressors Inc.
161 Lower Westfield Rd. Holyoke, MA 01040
P: 413-536-0600
F: 413-536-0091
E: info@atlascopco.compressorsusa.com
W: atlascopco.com
Atos North America
50 Aberdeen Rd. York, PA 17406
P: 717-840-7814
F: 717-840-7396
E: custserv@atosna.com
W: atosna.com
Aurelius Mfg. Co., Inc.
220 – 8th Street SW Braham, MN 55006
P: 320-396-3343
F: 320-396-3346
E: info@aurelius-mfg.com
W: aurelius-mfg.com
Automatic Valve Corp.
41144 Vincenti Ct. Novi, MI 48375-1922
P: 248-474-6700
F: 248-474-6732
W: automaticvalve.com
AutomationDirect
3505 Hutchinson Road Cumming, GA 30040
P: 800-633-0405
E: customersupport@ automationdirect.com
W: automationdirect.com
AVENTICS Corp.
1953 Mercer Road Lexington, KY 40511
P: 859-254-8031
F: 859-254-4188
E: customer.us@aventics.com
W: aventics.com/us
AW Chesterton Company
860 Sales Street Groveland, MA 01830
W: www.chesterton.com
AW-Lake Company
8809 Industrial Drive Franksville, WI 53126
P: 262-884-9800
E: sales@aw-lake.com
W: aw-lake.com
Axiomatic Technologies Corporation
1445 Courtneypark Dr E. Mississauga, ON L5T 2E3
P: 1-905-602-9270
F: 1-905-602-9279
E: sales@axiomatic.com
W: axiomatic.com
Bailey International Corporation
2527 Westcott Blvd. Knoxville, TN 37931
P: 800-800-1810
F: 800-800-1811
E: customerservice@Baileynet.com
W: baileynet.com
Bal Seal Engineering, Inc.
19650 Pauling Foothill Ranch, CA 92610
P: 949-460-2100
F: 949-460-2300
E: Sales@balseal.com
W: balseal.com
Baldwin Filters
4400 East Highway 30 Kearney, NE 68847
P: 308-234-1951
F: 800-828-4453
E: info@baldwinfilter.com
W: baldwinfilter.com
Barksdale Control Products
3211 Fruitland Avenue Long Angeles, CA 90058
P: 323-589-6181
F: 323-589-3463
E: sales@barksdale.com
W: barksdale.com
Beach Filter Products, Inc.
555 Centennial Avenue
Hanover, PA 17331-0505
P: 717-698-1403
F: 717-698-1610
E: sales@beachfilters.com
W: beachfilters.com/
BEHCO-MRM 1666 E. Lincoln Ave. Madison Heights, MI 48071
P: 888-882-3426
F: 586-755-5464
E: sales@behco.com
W: behco.com
Behringer Corp. 17 Ridge Rd. Branchville, NJ 07826
P: 973-948-0226
F: 973-948-2562
E: cserv@behringersystems.com
W: behringersystems.com
BellowsTech, an MW Industries Company
1289 N. US Highway 1, Ste. #1 Ormond Beach, FL 32174
P: 386-672-2558
E: info@bellowstech.com W: bellowstech.com
Berendsen Fluid Power 401 S. Boston, Suite 1200 Tulsa, OK 74102
P: 918-592-3781 F: 918-581-5080 E: info@bfpna.com W: bfpna.com
Bernard & Company 1540 E. Dundee Rd., Ste. 250 Palatine, IL 60074 P: 847-934-4500 F: 847-934-4720 E: Kristen@bernardandcompany.com W: bernardandcompany.com
Bimba Manufacturing Company 25150 S. Governors Highway University Park, IL 60484 P: 708-534-8544 F: 708-235-2014 E: cs@bimba.com W: bimba.com
BJM Pumps 123 Spencer Plain Rd. Old Saybrook, CT 06475
P: 860-399-5937
E: sales@bjmpumps.com W: bjmpumps.com
Bobalee Hydraulics 137 North East St. Laurens, IA 50554 P: 712-845-4554 F: 712-845-2503
E: rhurst@bobalee.com W: bobalee.com
Bondioli & Pavesi Inc. 10252 Sycamore Dr. Ashland, VA 23005
P: 804-550-2224 F: 804-550-2837
E: bpus.info@bondioli-pavesi.com W: bondioli-pavesi.com
Bonfiglioli North America 3541 Hargrave Ct Hebron, KY 41048
P: 859-334-3333
E: mbx-industrialsalesUSA@ bonfiglioli.com W: bonfiglioli.com
Bosch Rexroth 14001 S Lakes Dr. Charlotte, NC 28273 P: 1-800-739-7684
E: info@boschrexroth-us.com W: boschrexroth-us.com
Bosch Rexroth Hydraulics Industrial and Mobile 2315 City Line Road Bethlehem, PA 18017-2131
P: 610-694-8300
F: 610-694-8339
E: info@boschrexroth-us.com W: boschrexroth-us.com
Brand Hydraulics Co. 2332 S. 25th Street Omaha, NE 68105
P: 402-344-4434
F: 402-341-5419
E: sales@brand-hyd.com W: brand-hyd.com
Bray Controls Division of Bray Int’l, Inc. 13333 Westland East Blvd. Houston, TX 77041
P: 281-894-5454
F: 281-894-0077
E: bob.bloem@bray.com W: braycontrols.com
Brennan Industries
6701 Cochran Road
Solon, OH 44139
P: 440-248-1880
F: 440-248-7282
E: bjarrell@brennaninc.com
W: brennaninc.com
Brevini USA
14141 W Brevini Dr. Yorktown, IN 47396
P: 765-759-2300
F: 765-759-2301
E: T.Sample@breviniusa.com W: breviniusa.com
Briggs 3 Bellecor Drive New Castle, DE 19720
P: 800-441-7312
F: 302-322-7707
E: rjnewman@briggsco.net W: briggsco.net
Bucher Hydraulics Inc. 2545 Northwest Parkway Elgin, IL 60124
P: 847-429-0700
F: 847-429-0777
E: info.us@bucherhydraulics.com
W: bucherhydraulics.com
Burkert Fluid Control Systems 11425 Mt. Holly-Huntersville Road Huntersville, NC 28078
P: 704-504-4440 E: marketing-usa@burkert.com W: burkert-usa.com
Buyfittingsonline.com 4388 Broadway Depew, NY 14043
P: 716-681-0810
F: 716-681-0881
E: bfo@qmctechnologies.com
W: buyfittingsonline.com
CC.C. Jensen, Inc.
1557 NW Ballard Way Seattle, WA 98107
P: 206-789-1710
F: 206-789-1747 W: ccjenson.com
Canfield Connector
8510 Foxwood Ct Youngstown, OH 44514
P: 330-758-8299
E: customerservice@ canfieldconnector.com W: canfieldconnector.com
Canimex Inc.
285 St. Georges Drummondville, QC Canada J2C 4H3
P: 819-477-1335 F: 819-477-2908
E: lavoier@canimex.com W: canimex.com
CAPLUGS 2150 Elmwood Avenue Buffalo, NY 14207
P: 888-CAPLUGS F: 716-874-1680
E: sales@caplugs.com W: caplugs.com
Caplugs Pennsylvania 7090 Edinboro Rd. Erie, PA 16509
P: 800-458-0465
F: 800-358-4391 W: caplugs.com
CAT PUMPS
1681 94th Lane NE Minneapolis, MN 55449
P: 763-780-5440
F: 763-780-2958
E: techsupport@catpumps.com W: catpumps.com
CEJN North America
212 Ambrogio Dr. Gurnee, IL 60031
P: 1-800-222-2356
F: 847-263-7207
E: customer.service.usa@cejn.com W: cejn.com
CIM-TEK Filtration (Central Illinois Mfg. Co.) 201 N. Champaign St. Bement, IL 61813
P: 217-693-6555
F: 217-693-6673
E: info@cim-tek.com W: cim-tek.com
Certified Power, Inc. 970 Campus Dr. Mundelein, IL 60060
P: 888-905-7411
F: 847-573-3836
E: cpi_il@certifiedpower.com
W: certifiedpower.com
CFC Industrial Training of CFC- Solar Inc. 7042 Fairfield Business ctr. Fairfield, Ohio 45014
P: 513-874-3225
F: 513-874-3229
E: info@ cfcindustrialtraining.com W: cfcindustrialtraining.com
Checkfluid Inc. 4070 Eastgate Crescent. London, ON CANADA N5W0A6 P: 519-652-6373 F: 519-652-0392
E: info@checkfluid.com
W: checkfluid.com
Clean Filtration USA 222 S Navigation Blvd. Corpus Christi, TX 78405
P: 888-861-8058
F: 713-461-9631
E: service@cleanfiltrationusa.com
W: cleanfiltrationusa.com
Clearwater Hydraulics LLC 34191 Hwy 95 Lewiston, ID 83501
P: 888-577-5551
F: 208-743-5571
E: FPJ@clearwaterhydraulics.com W: clearwaterhydraulics.com
Clippard Instrument Laboratory, Inc. 7390 Colerain Ave. Cincinnati, OH 45239
P: 513-521-4261
E: sales@clippard.com
W: clippard.com
Co-ax Valves Inc. 1518 Grundy’s Lane Bristol, PA 19007
P: 215-757-3725
F: 215-757-4060
E: info@coaxvalves.com
W: coaxvalves.com
Como Filtration Systems 130 Freedom Lane Janesville, WI 53546
P: 608-756-3838
F: 608-756-1262
E: sales@como.biz
W: como.biz
Component Sourcing Intl. LLC 1575 Boston Post Rd., Suite 7 Guilford, CT 06437
P: 203-453-6000
F: 203-453-9757
E: arapkin@componentsourcing.com
W: componentsourcing.com
Concentric AB 2222 15th Street Rockford, IL 61104
P: 815-398-4400
Toll Free: 800-572-7867
F: 815-398-5977
E: info.us@concentricAB.com
W: concentricAB.com
Continental Hydraulics/Hydreco 4895 12th Avenue East Shakopee, MN 55379
P: 952-895-6400
F: 952-895-6444
E: sales@continentalhydraulics.com W: continentalhydraulics.com
Control Products, Inc. 280 Ridgedale Ave. East Hanover, NJ 07936 P: 973-887-9400 F: 973-887-5083 E: sales@cpi-nj.com W: cpi-nj.com
Controlled Fluids, Inc. 7725 South Major Drive Beaumont, TX 77705 P: 800-722-2630 E: isales@confluids.com W: confluids.com
Controlled Motion Solutions 911 N. Poinsettia St. Santa Ana, CA 92701 P: 800-696-6165 F: 714-541-2266
E: sales@comoso.com W: comoso.com
Copper State Fluid Power 4195 S. Contractors Way Tucson, AZ 85714 P: 520-777-3867 F: 520-777-4647
E: Sales@copperstatefluidpwr.com W: copperstatefluidpwr.com
COXREELS 5865 S. Ash Ave. Tempe, AZ 85283 P: 800-COX-REEL F: 480-820-5132 E: info@coxreels.com W: coxreels.com
Cross Fluid Power P.O. Box 18508 Greensboro, NC 27419-8508
P: 336-856-6985 F: 336-856-6975
E: info@crossco.com W: crossfluidpower.com
Cross Manufacturing, Inc. 11011 King St., Suite 210 Overland Park, KS 66210 P: 913-433-7777
E: info@crossmfg.com W: crossmfg.com
CRS Service, Inc. 1986 Rochester Industrial Drive Rochester Hills, MI 48309 P: 248-652-9940 F: 248-652-9946
E: csolgan@crsservice.com W: crsservice.com
Engineered Solutions for Machine Tool Applications
Global
F: 818-709-0426
E: stajbakhsh@ccsdualsnap.com W: ccsdualsnap.com
Custom Hoists, Inc.
771 Rt. 30A West Ashland, OH 44805
P: 800-837-4668
F: 800-224-6478
E: garyl@customhoists.com W: customhoists.com
Cyber-Tech, Inc.
7943 S.W. Cirrus Dr. Beaverton, OR 97008
P: 503-620-2285
F: 503-968-8882
E: sales@cyber-tech.net W: cyber-tech.net
D
Dakota Fluid Power
3409 N. Lewis Ave.
Sioux Falls, SD 57104
P: 605-338-9982
F: 605-332-0988
E: sales@dakotafluidpower.com W: dakotafluidpower.com
Delta Power Co.
4484 Boeing Dr. Rockford, IL 61109
P: 815-397-6628
F: 815-397-2526
E: delta@delta-power.com W: delta-power.com
Delta^Q Corp. 14233 West Road Houston, TX 77041
P: 281-807-1840
F: 281-807-4457
E: rotwell@deltaq.com W: deltaq.com
Deltrol Fluid Products
3001 Grant Ave. Bellwood, IL 60104
P: 708-547-0500
F: 708-547-6881
E: info@deltrolfluid.com
W: deltrolfluid.com
Denison Hydraulics Inc. 14249 Industrial Parkway Marysville, OH 43040
P: 937-644-4435
F: 937-578-9001
W: denisonhydraulics.com
Deschner Corporation 3211 West Harvard St. Santa Ana, CA 92704
P: 714-557-1261
F: 714-557-4762
E: info@deschner.com
W: deschner.com
Deublin Company
2050 Norman Drive Waukegan, IL 60085
P: 847-689-8600
E: info@deublin.com
W: deublin.com
Devine Hydraulics Inc.
179 Gallivan Lane Uncasville, CT 06382
P: 860-859-1650
F: 860-859-3711
E: sales@dhict.com
W: dhict.com
Diamond Hydraulics, Inc.
6776 FM 2004 Hitchcock, TX 77563
P: 409-986-3957
F: 409-986-7437
E: sales@diamondhydraulicsinc.com
W: diamondhydraulics.com
Diamond Wire Spring Company
1901 Babcock Boulevard Pittsburgh, PA 15209
P: 800-816-5613
F: 412-821-2743
W: diamondwire.com
Differential Pressure Plus, Inc.
Daman Products Company, Inc 1811 N. Home Street Mishawaka, IN 46545
P: 800-959-7841 F: 800-241-7664 E: info@daman.com W: daman.com
Danfoss Power Solutions 2800 E. 13th Street Ames, IA 50010 P: 515-239-6000 W: danfoss.com/powersolutions
Datum-A-Industries, Inc. P.O. Box 218, 1410 County Rd. 90 Maple Plain, MN 55359
P: 763-479-1133 F: 763-479-3667 E: info@datum-manifolds.com W: datum-manifolds.com
Del Hydraulics, Inc. 571 Howard St. Buffalo, NY 14206
P: 716-853-7996 F: 716-853-8003 E: markz@delhydraulics.com W: delhydraulics.com
Delta Computer Systems, Inc. 1818 SE 17th St. Battleground, WA 98604
P: 360-254-8688 F: 360-254-5435
E: technicalsales@deltamotion.com W: deltamotion.com
Donaldson Co., Inc. PO Box 1299
Minneapolis, MN 55440
P: 800-374-1374
F: 952-887-3716
E: engineserviceparts@donaldson. com W: donaldsonfilters.com
Double A Hydraulics 536 Township Line Road, Fluid Technology Annex Blue Bell, PA 19422
P: 215-643-0617 F: 215-643-4017
E: sales@doubleahydraulics.com
W: doubleahydraulics.com
DTS Fluid Power, LLC
3580 Busch Dr. Grandville, MI 49418
P: 616-538-3759
F: 616-538-3759 W: dtsfluidpower.com
Duplomatic Motion Solutions 9337 Ravenna Rd. Unit G Twinsburg, OH 44087
P: 330-405-1800
F: 330-405-1801
E: sales@uhiltd.com
W: uhiltd.com
Dura-Bar
1800 West Lake Shore Dr. Woodstock, IL 60098
P: 1-800-BAR-MILL
F: 815-338-1549
E: sales@dura-bar.com
W: dura-bar.com
Duryea Technologies 1060 Old Bernville Rd. Ste 300 Reading, PA 19605
P: 484-277-7137
E: info@duryeatech.com W: duryeatechnologies.com
Dylix Corporation 347 Lang Blvd. Grand Island, NY 14072
P: 716-773-2985 F: 716-773-2786
E: sales@dylixcorp.com
W: dylixcorp.com
Dynamic Fluid Components 2810 Blue Ridge Blvd. West Union, SC 29696
P: 864-638-5544
F: 864-638-0005
E: dynamic@dynamicfc.com
W: dynamicfc.com
Dynamic Testing & Equipment 8000 Yankee Road, Suite 105 Ottawa Lake, MI 49267
P: 734-847-2648
F: 734-847-2679
E: peter.frissell@dynamic-testing. com W: dynamic-testing.com
67 North Branford Road Branford, CT 06405
P: 203-481-2545
F: 203-483-7169
E: info@dpgaugeusa.com
W: differentialpressure.com
Diversified Bronze & ManufacturingBronze Bushings 910 6th St NW Braham, MN 55006
P: 763-689-4444
F: 320-396-2222
E: sales@diversifiedbronze.com
W: diversifiedbronze.com
Dixon Valve 800 High Street Chestertown, MD 21620
P: 877-963-4966
F: 800-283-4966
E: sales@dixonvalve.com
W: dixonvalve.com
DMIC
3776 Commerce Dr. Wheatfield, NY 14120
P: 716-743-4360
F: 716-743-4370
E: sales@dmic.com
W: dmic.com
Doering Company
6343 River Rd. SE Clear Lake, MN 55319
P: 320-743-2276
F: 320-743-3723
E: info@doering.com W: doering.com
Eaton – Hydraulics Business 14615 Lone Oak Road
Eden Prairie, MN 55344
P: 952-937-9800
F: 952-937-7105
E: eatonhydpmcmarketing@eaton. com
W: eaton.com/hydraulics
Echo Engineering and Production Supplies, Inc.
5406 W. 78th Street
Indianapolis, IN 46268
P: 888-324-6365
F: 317-875-0035
E: info@echosupply.com
W: echosupply.com
Elite Manifolds
1640 New Market Ave. South Plainfield, NJ 07080
P: 732-595-7410
F: 732-424-1262
E: eng@elitemanifolds.com
W: elitemanifolds.com
Elma Electronic 44350 Grimmer Blvd. Fremont, CA 94538
P: 510-656-3400
F: 510-656-3783
E: Valerie.andrew@elma.com W: elma.com
Embassy Global, LLC P.O. Box 924 Hamburg, NY 14075-0924
P: 716-646-0927
E: inquiries@embassyglobalpr.com W: embassyglobalpr.com
Emerson Process Management 8200 Market Blvd. Chanhassen, MN 55317
P: 800-999-9307
F: 952-949-7001
E: Rosemount.Info@ EmersonProcess.com W: rosemount.com
EMMEGI Heat Exchangers, Inc. 3326 E. Southern Avenue #3 Phoenix, AZ 85040
P: 602-438-7101
F: 602-438-7127
E: sales@emmegiinc.com
W: emmegiinc.com
Energy Manufacturing Co., Inc.
204 Plastic Lane Monticello, IA 52310
P: 319-465-3537
F: 319-465-5279
E: info@energymfg.com
W: energymfg.com
Engineered Inserts & Systems Inc. 200 D Cascade Blvd. Milford, CT 06460
P: 203-301-3334
E: briank@eisinserts.com W: eisinserts.com
DynaQuip Controls 10 Harris Industrial Park St. Clair, MO 63077 P: 800-545-3636 E: info@dynaquip.com W: dynaquip.com
Dynatect manufacturing, INC 2300 S. Calhoun Rd. New Berlin, WI 53151 P: 262-786-1500 F: 262-786-3280 E: sales@dynatect.com W: Dynatect.com
Dynex /Rivett Inc. 770 Capital Dr. Pewaukee, WI 53072 P: 262-691-2222 F: 262-691-0312
W: dynexhydraulics.com
EAO Corporation One Parrott Drive Shelton, CT 06484
P: 203-951-4600
F: 203-951-4601
E: sales.eus@eao.com W: eao.com
Eaton Aerospace, Engineered Sensors 15 Durant Ave. Bethel, CT 06801
P: 203- 796-6000
F: 203-796-6313
W: aerospace.eaton.com
Engineered Specialty Products 3295 Cobb International Blvd. Kennesaw, GA 30152
P: 800-367-1377
F: 770-429-0795
E: sales@espgauges.com W: espgauges.com
Enpac Corporation 34355 Vikes Dr. Eastlake, OH 44095
P: 800-436-7224
F: 440-475-0047
W: enpac.com
Entwistle Co. 6 Bigelow St. Hudson, MA 01749
P: 508-481-4000
F: 508-481-4004
E: jkendall@entwistleco.com
W: entwistleco.com
Epicor Software 807 Las Cimas Pkwy. Austin, TX 78746
P: 512-328-2300
E: info@epicor.com
W: epicor.com/distribution
ESI- Pressure Tranducer 6560 W. Rogers Cir. Suite 22 Boca Raton, FL 33487
P: 561-989-8540
F: 561-989-8816
E: info@esi-transducer.com
W: esi-transducer.com
Eskridge
1900 East Kansas City Rd.
Olathe, KS 66051
P: 913-782-1238
F: 913-782-4206
E: sales@eskridgeinc.com
W: eskridgeinc.com
Essentra
3123 Station Road
Erie, PA 16510
P: 800-847-0486
F: 866-561-6617
E: sales@essentracomponents.com
W: essentracomponents.com
ETI
1246 Denver Ave. Loveland, CO 80537
P: 970-685-2662
E: dave@etiglobal.com
W: etiglobal.com
European Industrial Products, Inc.
5785 Advantage Cove Memphis, TN 38141
P: 901-375-0011
F: 901-375-4002
E: info@eip.us.com
W: eip.us.com
Evonik
723 Electronic Drive
Horsham, PA 19044
P: 215-706-5800
F: 215-706-5801
E: oil-additives@evonik.com
W: dynavis.com
Exair Corporation
1250 Century Circle N Cincinnati, OH 45246
P: 513-671-3322
F: 513-671-3363
E: techelp@exair.com
W: exair.com
ExpresSeal Div. of Apple Rubber 204 Cemetery Road Lancaster, NY 14086
P: 716-684-6560
F: 716-684-1678
E: exinfo@expresseal.com
W: expresseal.com
Fabco-Air, Inc.
3716 NE 49th Ave. Gainesville, FL 32609-1699
P: 352-373-3578
F: 352-375-8024
E: service@fabco-air.com
W: fabco-air.com
Fairfield Manufacturing Company, Inc.
P.O. Box 7940 Lafayette, IN 47903
P: 765-772-4000
F: 765-772-4010
E: sales@fairfieldmfg.com
W: fairfieldmfg.com
Fairview Fittings and Manufacturing 3777 Commerce Court Wheatfield, NY 14120
P: 800-688-4088
F: 716-614-0329
E: ussales@fairviewfittings.com
W: fairviewfittings.com
Famic Technologies Inc. 9999 Cavendish Blvd., Suite 350 St. Laurent, QC CANADA H4M 2X5
P: +1 514-748-8050
F: +1 514-748-7169
E: sales@famictech.com
W: automationstudio.com
FasTest, Inc.
1646 Terrace Drive Roseville, MN 55113
P: 800-444-2373
F: 651-645-7390
E: fastsales@fastestinc.com
W: fastestinc.com
FEMA Corporation
1716 Vanderbilt Avenue Portage, MI 49024
P: 269-323-1369
F: 269-323-0108
E: sales@fema-corp.com
W: fema-corp.com
Feroy Company, Inc.
3220 B Street SE Auburn, WA 98002
P: 253-939-1363
F: 255-939-0810
E: glenn@feroy.com
W: feroy.com
Ferry, Inc.
3179 Walden Avenue Depew, NY 14043
P: 716-684-1703
F: 716-684-1706
E: sales@ferryinc.com W: ferryinc.com
FHI – Sioux City 623 W. 7th St. Sioux City, IA 51103
P: 712-279-8086
F: 712-279-8071
E: dharder@fhi.siouxcity.com
Filtration Products Corporation 18151 Territorial Road Dayton, MN 55369
P: 763-428-6418
F: 763-428-8659
E: sales@filtrationproducts.com
W: filtrationproducts.com
Filtrec North America PO Box 1222 Sault Ste. Marie, MI 49783
P: 888-345-8732
F: 705-256-6064
E: information@filtrec.net W: filtrec.net
Fisher Gold Star 603 Highway 10 West, Box 164 Laurens, IA 50554
P: 712-845-2634 F: 712-845-2571 W: fishergoldstar.com
FlangeLock, LLC 57 Old Post Road #2 Greenwich, CT 06830
P: 203-861-9400
F: 203-622-1238 E: sales@flangelock.com W: flangelock.com
Flaretite Inc. 4036 Shadow Oak Fenton, MI 48430
P: 810-750-4140 E: sales@flaretite.com W: flaretite.com
Flint Hydraulics, Inc. 4099 B.F. Goodrich Blvd. Memphis, TN 38118
P: 901-794-4884
F: 901-794-1618
E: sales@flinthyd.com W: flinthyd.com
Flint Hydrostatics, Inc. 4084 E. Shelby Drive Memphis, TN 38118 P: 800-238-0155
E: sales@flinthydrostatics.com W: flinthydrostatics.com
Flodraulic Group 45 Sinclair Ave. Georgetown, ON CANADA L7G 4X4 P: 905-702-9456 F: 905-702-9457 E: flodraulic@flodraulic.com W: flodraulic.com
Flodyne Controls, Inc. 48 Commerce Drive Murray Hill, NJ 07974-1142
P: 908-464-6200 F: 908-464-1553
E: sales@flodynecontrols.com W: flodynecontrols.com
Flo-tech
A Division of Racine Federated, Inc. 2200 South St., P.O. Box 1404 Racine, WI 53404
P: 800-433-5263
F: 800-245-3569 W: hedland.com
Flow Ezy Filters Inc.
P.O. Box 1749 Ann Arbor, MI 48106
P: 734-665-8777
F: 734-665-4332
E: flowezy@flowezyfilters.com
W: flowezyfilters.com
Flow Technology
8930 S. Beck Avenue, Ste. 107 Tempe, AZ 85284
P: 480-240-3400
F: 480-240-3401
E: ftimarket@ftimeters.com
W: ftimeters.com
Flow-Tek, Inc., A Subsidiary Of Bray Int’l. Inc. 8323 N. Eldridge Pkwy #100 Houston, TX 77041
P: 832-912-2300
F: 832-912-2301
E: steve.johnston@flow-tek.com
W: flow-tek.com
Fluid Design Products, Inc. 3516 E. Main Spokane, WA 99202
P: 509-533-0479
F: 509-534-2998
E: steves@fluiddesignproducts.com W: fluiddesignproducts.com
Fluid Energy Controls 6431 Flotilla Street Los Angeles, CA 90040
P: 323-721-0588
F: 323-721-8368
E: JC@fecintl.com W: fecintl.com
Fluid Gear Products, Inc. 115 Market Street Marcus Hook, PA 19061
P: 610-200-6045
F: 610-200-6046
E: sales@fluidgearproducts.com W: fluidgearproducts.com
Fluid Line Products, Inc.
P.O. Box 1000 Willoughby, OH 44096
P: 440-946-9470
F: 440-946-9472
E: flp@fluidline.com
W: fluidline.com
Fluid Power Connections
P.O. Box 475 Englishtown, NJ 07726
P: 732-792-0411
E: info@usa-4u.com
W: fluidpowerconnections.com
Fluid Power Inc.
534 Township Line Road Blue Bell, PA 19422
P: 215-643-0350
F: 215-643-4017
E: sales@fluidpowerinc.com
W: fluidpowerinc.com
Fluid Power Service Corp.
4474 Walden Ave. Lancaster, NY 14086
P: 716-681-8474
F: 716-681-8514
E: kjirak@airlinehyd.com
W: fluidpowerservice.com
Fluid Power Training Institute 2170 South 3140 West Suite B West Valley City, UT 84119
P: 1-888-222-3421
F: 801-908-5734
W: fpti.org
Fluidtechnik USA, Inc. PO Box 715
Uwchland, PA 19480
P: 610-321-2407
F: 610-321-2409
E: sales@fluidtechnikusa.com
W: fluidtechnikusa.com
FluiDyne Fluid Power 31915 Groesbeck Hwy Fraser, MI 48026
P: 586-296-7200
E: sales@fluidynefp.com W: fluidynefp.com
FORCE America
501 East Cliff Road Burnsville, MN 55337
P: 952-707-1300
E: marketing@forceamerica.com W: forceamerica.com
Freelin-Wade 1730 NE Miller St. McMinnville, OR 97128
P: 503-434-5561 F: 503-472-1989
E: sales@freelin-wade.com
W: freelin-wade.com
Garrod Hydraulics
1050 Locust Point Road York, PA 17406
P: 717-767-6429
F: 717-764-4490
E: Brian@Garrod.com W: garrod.com
Gates Corporation PO Box 5887 Denver, CO 80217
P: 303-744-1911
F: 303-744-4540
E: gatesmail@salessupport.com
W: gates.com/fluidpower
Gator Hose
12327 E. 1st St. Tulsa, OK 74128
P: 918-794-2550
F: 918-794-2560
E: info@gatorhose.com
W: gatorhose.com
Geartek 1506 S. Fulton Drive PO Box 2160 Corinth, MS 38834
P: 662-286-2252
F: 662-287-6580
E: haisales@geartek.com
W: geartek.com
Gefran, Inc.
400 Willow St.
North Andover, MA 01845
P: 888-888-4474
E: sales.us@gefran.com
W: gefran.com
Gemels North America, Inc. 35 Watterson St. Dayton, OH 45417
E: northamerica@gemels.com
W: gemels.com
Gems Sensors & Controls One Cowles Road Plainville, CT 06062
P: 800-378-1600 F: 860-793-4531
E: info@gemssensors.com
W: gemssensors.com
Global Servo Hydraulics, Inc. 609 Corry A Edwards Drive Kennedale, TX 76060
P: 800-673-4745
F: 817-478-4958
E: servovalve@yahoo.com
W: globalservo.com
Goodway Technologies Corp. 420 West Avenue Stamford, CT 06902
P: 203-359-4708
F: 203-359-9601
E: goodway@goodway.com W: goodway.com
Goodyear Engineered Products 703 S. Cleveland-Massillon Road Fairlawn, OH 44333 P: 330-664-7091 F: 330-664-7145
E: randy-kish@veyance.com W: goodyearep.com
GPM Controls 1607 Industrial Dr. Carlisle, PA 17013
P: 717-218-6565
E: info@gpmcontrols.com W: gpmcontrols.com
Granzow Inc. 2300 Crownpoint Executive Dr. Charlotte, NC 28227
P: 704-845-2300 F: 704-845-2301 E: lars@granzow.com W: granzow.com
Greenco Corp. 5688 West Crenshaw St. Tampa, FL 33634
P: 813-882-4400
F: 813-882-4400
E: sales@greencocylinders.com W: greencocylinders.com
GS Global Resources 926 Perkins Dr. Mukwonago, WI 53149
P: 262-378-5200 F: 262-378-5400
E: sales@gsgr.com W: gsglobalresources.com
CONTROL SOLUTIONS
GS North America LLC
5050 S. Towne Dr. New Berlin, WI 53151
P: 262-786-0100
F: 262-786-6787
E: mtorbett@gsna.com
W: gsna.com
Hallite Seals
130 Oldfield Rd.
Hampton, Middlesex TW12 2HT
United Kingdom
P: 44 (0)20 8941 2244
F: 44 (0)20 8783 1669
E: sales@hallite.com
W: hallite.com
Hannay Reels
553 State Route 143 Westerlo, NY 12193
P: 877-467-3357
F: 518-797-3259
E: reels@hannay.com
W: hannay.com
Harman Corp.
360 South St. Rochester, MI 48307
P: 248-651-4477
F: 248-651-4495
E: Jeff@harmancorp.com
W: harmancorp.com
Harrison Hydraulic Solutions 14233 West Road
Houston, TX 77041
P: 281-807-4420
F: 281-807-4815
Hayden Industrial Products 1393 E. San Bernardino Ave. San Bernardino, CA 92408
P: 951-736-2600
F: 951-736-2629
E: cs@HaydenIndustrial.com
W: HaydenIndustrial.com
HBC-radiomatic, Inc. 1017 Petersburg Road Hebron, KY 41048
P: 859-689-6400 F: 866-266-7227
E: sales@hbc-usa.com
W: hbc-usa.com
Heavy Motions Inc
2134 S. Green Privado Ontario, CA 91761
P: 1-866-865-8889 F: 909-498-0468 E: info@heavymotions.com W: heavymotions.com
Hercules Sealing Products
1016 North Belcher Rd. Clearwater, FL 33765
P: 727-796-1300
F: 727-797-8849
E: sales@herculesus.com
W: herculesus.com
Heypac Inc.
1098 E. Avon Road Rochester Hills, MI 48307
P: 248-652-3500
F: 248-652-1717
W: heypac.com
High Country Tek, Inc.
208 Gold Flat Court Nevada City, CA 95959
P: 530-265-3236
F: 530-265-3275
E: info@hctcontrols.com
W: hctcontrols.com
HKX, Inc.
16761 146th Street, Suite 115 Monroe, WA 98272
P: 800-493-5487
E: mspinner@hkx.com
W: hkx.com
Hoffer Flow Controls
107 Kitty Hawk Lane
Elizabeth City, NC 27909
P: 252-331-1997
F: 252-331-2886
E: info@hofferflow.com
W: hofferflow.com
Holmbury Inc
33801 Curtis Blvd. Eastlake, OH 44095
P: 440-578-1070
F: 440-578-1073
E: couplers@holmburyusa.com
W: holmbury.com
Honor Pumps USA
222 S. Navigation Blvd.
Corpus Christi, TX 78405
P: 713-984-8144
F: 361-883-3893
E: service@honorpumps.com
W: honorpumps.com
Hope Group, The 70 Bearfoot Road Northborough, MA 01532
P: 508-393-7660
F: 508-393-8203
E: techsupport@thehopegroup.com
W: TheHopeGroup.com
HosePower
E: fluidpower@harrisonhydragen.org
W: harrisonhydragen.com
Hartfiel Automation
6533 Flying Cloud Dr., Suite 100 Eden Prairie, MN 55344
P: 952-974-2500
E: info@hartfiel.com
W: hartfiel.com
Hartmann Controls, Inc.
604 Progress Drive Hartland, WI 53029
P: 262-367-4299
F: 262-367-5645
E: info@hartmanncontrols.com
W: hartmanncontrols.com
Harvard Corporation 505 Union Street Evansville, WI 53536
P: 608-882-6330
F: 608-882-5127
E: sales@harvardcorp.com
W: harvardcorp.com
Haskel International 100 E. Graham Place
Burbank, CA 91502-2027
P: 818-556-2528
F: 818-841-4291
W: haskel.com
HAWE Hydraulik USA
13020 Jamesburg Drive, Suite A
Huntersville, NC 28078
P: 704-509-1599
E: info@HAWEusa.com
W: HAWE.com
HED, Inc. 2120 Constitution Ave Hartford, WI 53027
P: 262-673-9450 E: Sales@HEDcontrols.com W: HEDcontrols.com
Hedland/Flow Meters 8635 Washington Ave. Racine, WI 53404
P: 800-433-5263 F: 800-245-3569 E: hedlandsales@racinefed.com W: Hedland.com
Heinrichs USA, LLC 1859 Airport Exchange Blvd. #200 Erlanger, KY 41018 P: 859-371-4999 F: 859-371-4899
E: mail@Heinrichs-USA.com W: heinrichs-usa.com
Helac Corporation 225 Battersby Ave. Enumclaw, WA 98022
P: 360-825-1601 F: 360-825-1603
E: actuators@helac.com W: helac.com
Helicoid Instruments, Bristol Babcock Inc. 1100 Buckingham St. Watertown, CT 06403
P: 860-945-2218 F: 860-945-2278
E: jmcgrail@bristolbabcock.com W: bristolbabcock.com
Hengli America 580 W. Crossroads Parkway Bolingbrook, IL 60440
P: 630-995-3674
E: sales@hengliamerica.com W: HengliAmerica.com
Humphrey Products 5070 East N Ave. Kalamazoo, MI 49003
P: 269-381-5500
F: 269-381-4113
E: websales@humphrey-products. com
W: humphrey-products.com
Hunger Hydraulics USA 63 Dixie Hwy Rossford, OH 43460
P: 1-800-248-9232
F: 419-666-9834
E: K.hunger@hunger-hydraulics.com
W: hunger-hydraulics.com
HUSCO International 2239 Pewaukee Rd. Waukesha, WI 53188
P: 262-513-4200
F: 262-513-4427
E: hussales@huscointl.com
W: huscointl.com
HYCO International Inc. 100 Galleria Pkwy., Ste. 1000 Atlanta, GA 30339 P: 770-980-1935 F: 770-980-1936 E: kachambers@hyco.net W: hyco.net
HYDAC Technology Corp. 2260 City Line Road Hellertown, PA 18017 P: 610-266-0100 E: Gretchen.walters@hydacUSA.com
W: hydac-na.com
Hydracheck – A Division of FPTI, Inc. 2170 S. 3140 West, Suite B Salt Lake City, UT 84106
P: 801-908-5717 F: 801-908-5734
E: sales@hydracheck.com
W: hydracheck.com
Hydradyne, LLC 15050 FAA Blvd. Fort Worth, TX 76155
P: 817-391-1547
F: 817-391-1589
E: ssmith@rfallc.com
W: hydradynellc.com
Hydra-Hose & Supply Co. 5017 Cleveland St. Virginia Beach, VA 23462
P: 757-497-8704 F: 747-490-5930
E: info@hydrahose.net W: hydrahose.net
50 Industrial Loop N Orange Park FL 32073
P: 904-264-1267
F: 904-264-3288
E: sales@hoseboss.com
W: hosepower.com
Hoses2U
7100 Broadway Denver, CO 80221
P: 720-710-4441
E: jobs@hoses2u.com
W: hoses2u.com
Houghton International, Inc.
P.O. Box 930 Valley Forge, PA 19482
P: 610-666-4095
F: 610-666-137
E: tnoblit@houghtonintl.com W: houghtonintl.com
Huade-USA 1152 Marsh Street, Suite D Valparaiso, IN 46385
P: 219-548-2211
F: 219-462-0775
E: info@huade-usa.com W: huade-usa.com
Hudson Extrusions, Inc. 1255 Norton Rd., PO Box 255 Hudson, OH 44236-0255
P: 330-650-0524
F: 330-653-6551
E: info@hudsonextrusions.com W: hudsonextrusions.com
Humphrey Automation Inc.
570 Alden Road, Unit #10 Markham, Ontario Canada L3R 8N5
P: 905-479-3633
F: 905-479-3755
E: Humphrey@pneumation.ca W: humphreyautomation.ca
Hydraulic Manifolds USA
264 Marshall Hill Rd West Milford, NJ 07480
P: 973-728-1214
F: 973-728-9386
E: sales@hmanifolds.com
W: hydraulicmanifolds.com
Hydraulic Parts Source 41350 Production Dr. Harrison Twp., MI 48045
P: 586-463-3166
F: 586-463-3398
E: sales@hydparts.com W: hydparts.com
Hydraulic Repair and Design, Corp. 701 North Levee Rd Puyallup, WA 98371 P: 253-604-0400 F: 253-604-0408 Toll Free: 1-800-323-8416
E: sales@h-r-d.com W: h-r-d.com
Hydraulic Specialty Inc. 1131 72nd Avenue NE Fridley, MN 55432 P: 763-571-3072 F: 763-571-2330
E: sales@hydraulicspecialty.com W: hydraulicspecialty.com
Hydraulics, Inc. 2935 St. Louis Avenue Fort Worth, TX 76110
P: 817-923-1965 F: 817-927-8002
E: sales@hydraulicsinc.com W: hydraulicsinc.com
Hydraulics International, Inc. 9201 Independence Ave. Chatsworth, CA 91311 P: 818-407-3400 F: 818-407-3428
E: lturner@hiipumps.com W: hiipumps.com
Hydrauliques Continental 11385 boul. Marc-Aurèle-Fortin Montréal, Québec H1E3C6
P: 514-648-1601
F: 514-648-6322
E: info@hydrauliquescontinental.ca W: hydrauliquescontinental.ca
Hydra-Zorb Company 1751 Summit Drive Auburn Hills, MI 48326
P: 248-373-5151
F: 248-373-0711
E: sales@hydra-zorb.com
W: hydra-zorb.com
Hydramation, Inc. 9329 M. Ravenna Road Twinsburg, OH 44087 P: 330-405-5544 F: 330-405-5552
E: sales@hydramation.com W: hydramation.com
Hydra-Power Systems Inc. 5445 NE 122nd Ave. Portland, OR 97230
P: 503-777-3361 F: 503-775-6447
E: sales@hpsx.com W: hpsx.com
Hydraquip, Inc. 16330 Central Green Blvd. Suite 200 Houston, TX 77032
P: 713-680-1951
F: 713-680-9799
E: info@hydraquip.com W: hydraquip.com
Hydrasoft Corporation 608 S. Main Ave. Kankakee, IL 60901
P: 815-933-8840
F: 815-933-8861
Hydraulex 48175 Gratiot Ave. Chesterfield, MI 48051
P: 1- 800-422-4279
E: sales@hydraulex.com W: hydraulex.com
Hydraulex
701 North Levee Rd Puyallup, WA 98371
P: 253-604-0400
E: seattlesales@hydraulex.com W: hydraulex.com
Hydreco 2915 Whitehall Park Dr. Charlotte, NC 28273
P: 704-295-7575
F: 704-295-7574
E: hydrecoinfo@magusa.textron.com W: hydreco.com
Hydro-Craft Inc. 1821 Rochester Industrial Dr. Rochester Hills, MI 48309
P: 248-652-8100
F: 248-652-0343
E: Clamp5@aol.com W: hydro-craft.com
Hyflow Controls Inc 2134 S. Green Privado Ontario, CA 91761
P: 909-628-9866
F: 909-498-0468
E: sales@hyflow-controls.com W: hyflow-controls.com
Hy-Pro Filtration 12955 Ford Dr. Fishers, IN 46038
P: 317-849-3535
F: 317-849-9201
E: info@hyprofiltration.com W: hyprofiltration.com
Hy-Spec Hydraulik 9345 Trans-Canadienne Saint Laurent, Canada H4S 1V3
P: 514-333-5321
F: 514-333-0470 W: hy-spec.com
Hyvair Corp. 31341 Friendship Drive Magnolia, TX 77355
P: 866-449-8247
F: 281-259-7249
E: svairin@hyvair.com W: hyvair.com
IC-Fluid Power, Inc
63 Dixie Hwy. Rossford, OH 43460
P: 419-661-8811
F: 419-661-8844
E: us@icfluid.com
W: icfluid.com
IFH Group, Inc., The 3300 East Rte. 30 Rock Falls, IL 61071
P: 800-435-7003
F: 815-626-1438
E: info@ifhgroup.com
W: ifhgroup.com
igus Inc.
PO Box 14349
East Providence, RI 02914
P: 401-438-2200
Toll free: 1-800-521-2747
F: 401-438-7270
E: sales@igus.com
W: igus.com
IHD, Inc.
6830 N. Eldridge Pkwy, Unit 102 Houston, TX 77041
P: 713-849-2949
F: 713-849-5638
E: info@ihd-usa.com
W: ihd-usa.com
IMO USA Corp.
4000 Faber Place Drive, Suite 300 North Charleston, SC 29405
P: 843-813-4219
E: americas@imo.us
W: imo.us
Industrial Hardchrome, Ltd.
501 Fluid Power Dr. Geneva, IL 60134
P: 630-208-7000
F: 630-208-7035
W: industrialhardchrome.com
Industrial Nut Corp.
1425 Tiffin Ave. Sandusky, OH 44870
P: 419-625-8543
F: 419-625-5517
E: sales@industrialnut.com
W: industrialnut.com
Industrial Servo Hydraulics, Inc. 17650 Malyn Blvd. Fraser, MI 48026
P: 586-296-0960
F: 586-296-0375
E: klamberti@indservo.com
W: indservo.com
Industrial Specialties Mfg.
4091 S. Eliot St. Englewood, CO 80110
P: 303-781-8486
F: 303-761-7939
E: sales@industrialspec.com
W: industrialspec.com
Innovative Hydraulics LLC
305 S. 84th Avenue Wausau, WI 54401
P: 715-803-2600
E: sales@innovativehyd.com
W: innovativehyd.com
Inserta Products 538 Township Line Rd. Blue Bell, PA 19422
P: 215-643-0192
F: 215-643-4017
E: sales@inserta.com
W: inserta.com
Integrated Hydraulics, Inc. 7047 Spinach Dr. Mentor, OH 44060
P: 440-974-3171
F: 440-974-3170
E: usinfo@inthyd.com
W: intergratedhydraulics.com
Interface Sealing Solutions, North American Sales Office
22260 Hagerty Road Northville, MI 48167
P: 248-596-2810
F: 248-596-2880
E: vkburriss@sealinfo.com
W: interfacesealingsolutions.com
International FPA (Fluid Power of America)
43123 Business Park Drive Temecula, CA 92590
P: 951-676-2155
F: 951-676-2154, 2156
E: info@intlfpa.com
W: intlfpa.com
Inventive Resources, Inc.
5038 Salida Blvd PO Box 1316 Salida, CA 95368 P: 209-545-1663 E: info@jpce.com W: sealndry.com
IQ Valves 425 West Drive Melbourne, FL 32904 P: 321-729-9634 F: 321-768-8732
E: sales@IQValves.com W: IQValves.com
JJ.R. Merritt Controls Inc. 55 Sperry Ave. Stratford, CT 06615 P: 203-296-2272 F: 203-381-0400
E: jgurliacci@jrmerritt.com W: jrmerritt.com
J/T Hydraulics & Service Co., Inc. 1601 W. 25th Street Houston, TX 77008 P: 713-984-9727 E: erik@jthydraulics.com W: jthydraulics.com
Janatics USA, Inc. 2654A Lehigh Street Whitehall, PA 18052 P: 610-443-2400 F: 610-530-8439 E: seshb@janaticsusa.com W: janatics.com
JARP Industries 1051 Pine Street Schofield, WI 54476
P: 715-359-4241
F: 715-355-4960
E: sales@jarpind.com W: jarpind.com
Jason Industrial 221 South Westgate Drive Canul Stream, IL 60188
P: 630-752-0600
F: 630-752-0662
E: Miguel.valazquez@ammega.com W: jasonindustrial.com
Jem Technical Marketing 2250 Daniels Street Long Lake, MN 55356
P: 952-473-5012
F: 952-473-6930
E: sales@jemtechnical.com W: jemtechnical.com
JH Technology Inc. 4233 Clark Road, Unit 9 Sarasota, FL 34233
P: 941-927-0300
F: 941-925-8774
E: jhtek@jhtechnology.com W: jhtechnology.com
John Deere Cylinder Division 909 River Dr. Moline, IL 61265 P: 309-765-7596 F: 309-765-7379
JWF Technologies 6820 Fairfield Dr. Fairfield, OH 45014
P: 513-769-9611 F: 513-769-0109 E: info@jwftechnologies.com W: jwftech.com
Kaeser Compressors, Inc. P.O. Box 946 Fredericksburg, VA 22404
P: 540-898-5500 F: 540-898-5520 E: info.usa@kaeser.com W: kaeser.com
Kaiser Aluminum Fabricated Products, LLC 27422 Portola Pkwy. #200 Foothill Ranch, CA 92610
P: 562-754-1677 W: kaiseraluminum.com
Kavlico
14401 Princeton Ave. Moorpark, CA 93021
P: 805-523-2000
F: 805-523-7125
E: sales@kavlico.com
W: kavlico.com
Kawasaki Precision Machinery (USA) 3838 Broadmoor Ave. SE Grand Rapids, MI 49512
P: 616-975-3100
F: 616-975-3103
E: rachelle.kaltak@kmp-usa.com
W: kpm-usa.com
Kee Safety Inc 100 Stradtman St Buffalo, NY 14206
P: 716-896-4949 F: 716-896-5696
E: info@keesafety.com W: keesafety.com
Keller America Inc. 351 Bell King Road Newport News, VA 23606
P: 877-253-5537 F: 757-596-6659
E: sales@kelleramerica.com W: kelleramerica.com
Kepner Products Company 995 North Ellsworth Ave. Villa Park, IL 60181
P: 630-279-1550 F: 630-279-9669
E: wkokum@kepner.com
W: kepner.com
Keystone Fluid Power
120 Unico Drive – Valmont Industrial Park West Hazelton, PA 18202
P: 570-454-9759
F: 570-454-9789
E: neilc@keystonefluidpower.com
W: keystonefluidpower.com
Kocsis Technologies, Inc. 11755 South Austin Ave. Alsip, IL 60803
P: 708-597-4177
F: 708-371-6560
E: service@kocsistech.com
W: kocsistech.com
Kracht Corp. 6552 Weatherfield Court Maumee, OH 43537
P: 419-874-1000
E: s.zahn@krachtcorp.com
W: krachtcorp.com
Kraft Fluid Systems, Inc. 14300 Foltz Parkway Cleveland, OH 44149
P: 800-257-1155
F: 440-238-5266
E: csdept@kraftfluid.com W: kraftfluid.com
KTR Corporation 122 Anchor Rd. Michigan City, IN 46360
P: 219-872-9100
F: 219-872-9150
E: j.krueger@ktr.com
W: ktr.com
Kuriyama of America Inc. 360 E. State Parkway Schaumburg, IL 60173
P: 847-755-0360
F: 847-885-0996
E: sales@kuriyama.com
W: kuriyama.com
Kurt Hydraulics 5280 Main St. NE Minneapolis, MN 55421
P: 866-257-7995
E: kurthyd@aol.com W: kurthydraulics.com
KYB Americas Corporation 140 N. Mitchell Court Addison, IL 60101
P: 630-620-5555 F: 630-620-8133
E: hyd@kyb.com W: kybfluidpower.com
La-Man Corp.
Lee Company, The 2 Pettipaug Rd. Westbrook, CT 06498
P: 860-399-6281 F: 860-399-2270
E: inquiry@theleeco.com W: theleeco.com
Lehigh Fluid Power, Inc. Rte. 179, P.O. Box 76214
Lambertville, NJ 08530
P: 800-257-9515
F: 609-397-0932
E: sales@lehighfluidpower.com W: lehighfluidpower.com
Lenz Inc. P.O. Box 1044 Dayton, OH 45401-1044 P: 937-277-9364 F: 937-277-6516
E: rwagner@lenzinc.com W: lenzinc.com
Lexair, Inc. 2025 Mercer Road Lexington, KY 40511 P: 859-255-5001 F: 859-255-6656 E: jjennings@lexairinc.com W: lexairinc.com
Lillbacka USA Inc. 619 Estes Ave. Schaumburg, IL 60193 P: 847-301-1300 F: 847-301-2562
E: sales@lillbackausa.com W: lillbackausa.com
Linde Hydraulics Corporation 5089 W. Western Reserve Rd. Canfield, OH 44406-9112
P: 330-533-6801
F: 330-286-0741
E: info@linde-hydraulics.co W: linde-hydraulics.us
Liquid Controls 105 Albrecht Drive Lake Bluff, IL 60044
P: 847-295-1050
F: 847-295-1057
E: lc-info.lcmeter@idexcorp.com
W: lcmeter.com
LNA Solutions 3924 A Varsity Drive Ann Arbor, MI 48108
P: 734-677-2305
F: 734-671-2339
E: inquiries@lnasolutions.com
W: lnasolutions.com
Logic Hydraulic Controls, Inc. 6616 Windmill Way Wilmington, NC 28405
P: 910-791-9Scott.Oxjr@logichyd. com293
F: 910-392-5621 W: logichyd.com
Lubriplate Lubricants Co. 129 Lockwood Street Newark, NJ 07105
P: 800-733-4755
F: 800-347-5329
E: lubexpert@lubriplate.com W: lubriplate.com
Lydall Filtration (Filter Media) PO Box 1960 Rochester, NH 03866-1960
P: 603-332-4600
F: 603-332-9602
E: info@lydall.com W: lydallfiltration.com
Lynch Fluid Controls Inc. 1799 Argentia Road Mississauga, ON CANADA L5N 3A2
P: 1-905-363-2400
F: 1-905-363-1191
E: sales@lynch.ca W: lynch.ca
M & M Rogness Equipment Co. 1941 W. County Road C-2 Roseville, MN 55113
Machinery Service and Design W232 N 2960 Roundy Circle Dr. Pewaukee, WI 53072
P: 262-513-8040 F: 262-513-8044
E: les@ms-d.com W: ms-d.com
Mack Corporation 3695 E. Industrial Drive Flagstaff, AZ 86004
P: 928-526-1120 F: 928-526-0473
E: info@mackcorp.com W: mackcorp.com
Macro Sensors 7300 U.S. Route 130 N., Bldg. 22 Pennsauken, NJ 08110 P: 856-662-8000 F: 856-317-1005
E: positionsensors@macrosensors. com W: macrosensors.com
Macrotech Polyseal Inc. (MPI) 1754 West 500 South Salt Lake City, UT 84104 P: 801-973-9171 F: 801-973-918
Madison Company 27 Business Park Drive Branford, CT 06405 P: 203-488-4477 F: 203-481-5036 E: info@madisonco.com W: madisonco.com
Magister Hydraulics 175 Christie Street Newark, NJ 07105 P: 973-344-5313 F: 973-344-5167 E: info@magisterhyd.com W: magisterhyd.com
Magnatrol Valve Corporation 76 Fifth Avenue Hawthorne, NJ 07507 P: 973-427-4341 F: 973-427-7611 E: info@magnatrol.com W: magnatrol.com
Magnetek N49 W13650 Campbell Drive Menomonee Falls, WI 53051 P: 262-783-3500 E: radio.sales@magnetek.com W: columbusmckinnon.com/ magnetek
Main Filter, Inc. 188 Industrial Park Cres. Sault Ste Marie, ON P6B5P2 P: 800-465-6246 F: 705-949-9431
E: information@mainfilter.com W: mainfilter.com
Main Mfg. Products, Inc. 3181 Tri-Park Dr. Grand Blanc, MI 48439 P: 800-521-7918
F: 810-953-1385
E: info@mainmfg.com W: mainmfg.com
Manifold Center, The 12 Commercial Blvd. Medford, NY 11763 P: 631-736-2275 X1 E: kathya@manifoldcenter.com W: manifoldcenter.com
Maradyne Corp. 4540 W. 160th St. Cleveland, OH 44135
P: 216-362-0755 F: 216-362-0799
E: mwalsh@maradyne.com W: maradyne.com
LP.O. Box 328 Mazeppa, MN 55956
P: 507-843-4413 F: 507-843-4953
E: sales@laman.com W: laman.com
P: 651-633-0550 F: 651-633-6797
E: sales@mmrogness.com
W: mmrogness.com
Marco Rubber & Plastic 35 Woodworkers Way Seabrook NH 03874
P: 603-468-3600
F: 603-468-3490
E: sales@marcorubber.com W: marcorubber.com
HYDRAULIC FILTRATION SOLUTIONS
www.mpfiltriusa.com sales@mpfiltriusa.com
Marion Mfg.
Div. of Maradyne Corp.
4540 W. 160th St. Cleveland, OH 44135
P: 216-362-0755
F: 216-362-0799
E: walsh55@sbcglobal.net
W: maradyne.com
Marken Manufacturing / Uniflex of America
2081 E. Center Circle Plymouth, MN 55441
P: 763-577-0111
F: 763-577-0112
E: info@markenmfg.com
W: markenmfg.com
Marmon/Keystone LLC
P.O. Box 992 Butler, PA 16003
P: 724-283-3000
F: 724-283-0558
E: jevans@marmonkeystone.com
W: marmonkeystone.com
Marmon/Keystone LLC
225 East Cunningham Street Butler, PA 16001
P: 724-283-3000
F: 724-283-0558
E: sales@marmonkeystone.com
W: marmonkeystone.com
Mars Labs, LLC
29 C Street Laurel, MO 20707
P: 301-470-3278
F: 301-470-4749
E: mars.sales@marslabs.com
W: marslabs.com
Marzocchi Pumps
905 Albion Ave. Schaumburg, IL 60193
P: 1-800-924-5404
F: 847-923-9937
W: marzocchipumpsusa.com pumps@marzocchipumpsusa.com
Max Machinery, Inc. 33A Healdsburg Ave. Healdsburg, CA 95448
P: 707-433-2662
F: 707-433-1818
W: maxmachinery.com
MB Dynamics, Inc. 25865 Richmond Road
Cleveland, OH 44146
P: 1-216-292-5850
F: 1-216-292-5614
E: sales@mbdynamics.com W: mbdynamics.com
Men Micro Inc.
24 North Main St. Ambler, PA 19002
P: 215-542-9575
F: 215-542-9577
E: Stephen.cunha@menmicro.com W: menmicro.com
Metal-Matic, Inc.
629 2nd Street S.E. Minneapolis, MN 55414
P: 612-378-0411
F: 612-392-3399
E: sales@metal-matic.com
W: metal-matic.com
Metaris Corp. 1519 Hwy. 35 North Forest, MS 39074
P: 601-469-1987
F: 601-469-2120
Toll Free: 1-800-962-2703
E: sales@metarisusa.com
W: metaris.com
Metaris Inc. 101 Canarctic Dr. Toronto, Ontario CANADA M3J 2N7
P: 416-638-6000 F: 416-638-9365 Toll Free: 1-888-477-2737
E: sales@metaris.com W: metaris.com
Metro Machine and Engineering 8001 Wallace Rd. Eden Prairie, MN 55344
P: 952-937-2800
F: 952-937-2374
E: gpautsch@ metromachine.com W: metromachine.com
MFP Seals (A Division of Martin Fluid Power) 84 Minnesota Troy, MI 48083
P: 248-585-8170
F: 248-585-4398
E: sales@MFPseals.com W: MFPseals.com
Micheller and Son Hydraulics, Inc. 534 West First Ave. Roselle, NJ 07203
P: 908-687-1545
F: 908-241-0934
E: michellersonhyd@aol.com
W: michellerandsonhydraulics.com
MICO, Inc. 1911 Lee Blvd. North Mankato, MN 56003
P: 507-625-6426
F: 507-625-3212
E: micomail@mico.com W: mico.com
Micro Mini Hydraulic 536 Township Line Road Blue Bell, PA 19422
P: 215-542-2198
F: 215-643-4017
E: sales@microminihydraulics.com
W: microminihydraulics.com
Midland Industries 3145 Oak St. Kansas City, MO 64111
P: 800-821-5725
F: 800-888-5391
E: sales@midlandindustries.com W: midlandindustries.com
Milton Roy Company 201 Ivyland Road Ivyland, PA 18974
P: 215-441-0800
F: 215-441-8620
E: info@miltonroy.com
W: miltonroy-americas.com
Milwaukee Cylinder 5877 S. Pennsylvania Ave. Cudahy, WI 53110
P: 414-769-9700
F: 414-769-0157
E: sales@milwaukeecylinder.com
W: milwaukeecylinder.com
Milwaukee School of Engineering
Fluid Power Institute™ 1025 N. Broadway Milwaukee, WI 53202
P: 414-277-7191
F: 414-277-7470
E: wanke@msoe.edu
W: msoe.edu/fpi
MOCAP
409 Parkway Drive Park Hills, MO 63601
P: 800-633-6775
F: 314-543-4111
E: sales@mocap.com W: mocap.com
Moog 300 Jamison Road East Aurora, NY 14052
P: 716-652-2000
F: 716-687-4989
E: jmarsh@moog.com W: moog.com/industrial
Morris, S. G. 699 Miner Road Cleveland, OH 44143
P: 866-746-6774
F: 866-746-2556
E: SGMMail@SGMorris.com W: sgmorris.com
Motion Industries Inc. 1605 Alton Road Birmingham, AL 35210
Toll free: 800-526-9328
F: 1-205-957-5290
E: mimarketing@motionindustries. com W: motionindustries.com
MP Filtri Inc.
380 Four Valley Drive Concord, Ontario Canada L4K 5Z1
P: 905-303-1369
F: 905-303-7256
W: mpfiltricanada.com
MP Filtri USA, Inc. 1181 Richland Commerce Dr Quakertown, PA 18951
P: 888-263-0090
F: 215-529-1902
E: sales@mpfiltriusa.com
W: mpfiltriusa.com
MTE Hydraulics
4701 Kishwaukee Street Rockford, IL 61109
P: 815-397-4701
F: 815-399-5528
E: sales@mtehydraulics.com
W: mtehydraulics.com
MTS Systems
3001 Sheldon Drive Cary, NC 27513
P: 919-677-0100
F: 919-677-2343
E: sensorsinfo@mts.com
W: mtssensors.com
Muncie Power Products 201 East Jackson Street Muncie, IN 47305
P: 800-367-7867
F: 765-284-6991
E: rmiddleton@munciepower.com W: munciepower.com
Murrelektronik, Inc. 1400 Northbrook Parkway, Ste. 300 Suwanee, GA 30024
P: 770-497-9292
F: 770-497-9391
E: ahenry@murrinc.com W: murrinc.com
Myron L Company 2450 Impala Dr Carlsbad, CA 92010
P: 760-438-2021
F: 760-931-9189
E: info@myronl.com W: myronl.com
Nachi America Inc. – Hydraulics Div. 17500 Twenty-three Mile Rd. Macomb, MI 48044
P: 800-622-4410
F: 800-383-8665
E: hydraulics@nachiamerica.com
W: nachihydraulics.com
Napoleon Engineering Services 1601 Johnson Street Olean, NY 14760
P: 877-870-3200
F: 716-372-1448
E: sales@nesbearings.com W: nesbearings.com
Nass Controls LP 51509 Birch Street
New Baltimore, MI 48047
P: 586-725-6610
F: 586-725-5802
E: jim.rosenbury@nasscontrols.com
W: nasscontrols.com
National Tube Supply 925 Central Avenue University Park, IL 60484
P: 800-229-6872
E: sales@nationaltubesupply.com
W: nationaltubesupply.com
NC Servo Technology 38422 Webb Dr. Westland, MI 48185
P: 734-326-6666
F: 734-326-6669
E: sales@ncservo.com
W: ncservo.com
New Pig One Pork Avenue Tipton, PA 16684-0304 P: 814-684-0101 F: 814-684-7690
E: hothogs@newpig.com
W: newpig.com
NewAge Industries Inc. 145 James Way Southampton, PA 18966 P: 215-526-2300 F: 215-526-2191 E: info@newageindustries.com W: newageindustries.com
Nike Hydraulics Inc. 3980 West Albany, Unit #1 McHenry, IL 60050 P: 815-385-7777 F: 815-385-7776 E: info@nikehydraulics.com
Nopak 10179 S. 57th Street Franklin, WI 53132 P: 414-645-6000 F: 414-645-6048 E: sales@nopak.com W: nopak.com
Norman Filter Company 9850 S. Industrial Drive Bridgeview, IL 60455 P: 708-233-5521 F: 708-430-5961
E: sales@normanfilters.com W: normanfilters.com
North Coast Seal, Inc. 5273 West 137th St. Brook Park, OH 44142-1810 P: 216-898-5000 F: 800-435-5533 W: northcoastseal.com
Noshok, Inc. 1010 West Bagley Rd. Berea, OH 44017 P: 440-243-0880 F: 440-243-3472 E: jscott@noshok.com W: noshok.com
Nott Company 4480 Round Lake Road W Arden Hills, MN 55112 P: 800-634-3301 F: 651-415-3632
E: nottfp@nottco.com W: nottco.com
Novotechnik U.S., Inc. 155 Northboro Road Southborough, MA 01772
P: 508-485-2244 F: 508-485-2430
E: info@novotechnik.com
W: novotechnik.com
NRP Jones, LLC 302 Philadelphia Street LaPorte, IN 46350
P: 800-348-8868
F: 800-207-2221
E: sales@nrpjones.com
W: nrpjones.com
Nutron Motor Co., Inc. 102 Dow Hwy., P.O. Box 370 Eliot, ME 03903
P: 207-439-5272
F: 207-439-8611
W: nutronmotors.com
OEM Controls, Inc.
10 Controls Drive
Shelton, CT 06484
P: 203-929-8431
F: 203-929-3867
E: ContactUS@OEMControls.com
W: OEMControls.com
Oerlikon Fairfield US 525
Lafayette, IN 47903
P: 765-772-4200
F: 765-772-4001
E: gmoreland@fairfieldmfg.com W: fairfieldmfg.com
Oetiker, Inc. 6317 Euclid Street
Marlette, MI 48453
P: 989-635-3621
F: 989-635-2157
E: info@us.oetiker.com
W: oetiker.com
Ogura Industrial Corporation 100 Randolph Road Somerset, NJ 08873
P: 732-271-7361
F: 732-271-7580
E: jandes@ogura-clutch.com W: ogura-clutch.com
Ohio Fabricators Company 111 North 14th Street Coshocton, OH 43812
P: 888-354-0291
E: info@ohfab.com W: ohfab.com
Oilair Hydraulics, Inc. 11505 West Little York Houston, TX 77041
P: 713-937-8900
F: 713-937-0438
E: sales@oilairhydraulics.com
W: oilairhydraulics.com
Oilgear Company 2300 S. 51st Street Milwaukee, WI 53234
P: 414-327-1700
F: 414-327-0532
E: sales@oilgear.com W: oilgear.com
Oil-Rite Corporation P.O. Box 1207 Manitowoc, WI 54221-1207
P: 920-682-6173
F: 920-682-7699
E: sales@oilrite.com W: oilrite.com
O’Keefe Controls Company P.O. Box 316 Monroe, CT 06468
P: 203-261-6711
F: 203-261-8331
E: info@okeefecontrols.com W: okeefecontrols.com
Olsen Manufacturing Company, Inc. 4353 Delemere Blvd. Royal Oak, MI 48073
P: 248-549-4200
F: 248-549-4250
E: olsenmfg@aol.com W: olsenmfg.com
Omega Engineering 800 Connecticut Avenue Norwalk, CT Suite 5N01
P: 203-359-1660
F: 203-359-7700
E: sales@omega.com W: omega.com
Omnex Control Systems Inc. 74-1833 Coast Meridian Rd. Port Coquitlam, BC Canada V3C 6G5
P: 604-944-9247
F: 604-944-9267
E: sales@omnexcontrols.com W: omnexcontrols.com
Ono Sokki Technology, Inc. 2171 Executive Dr. # 400 Addison, IL 60101
P: 630-627-9700
F: 630-627-0004
E: info@onosokki.net W: onosokki.net
Orange Research 140 Cascade Boulevard. Milford, CT 06460
P: 203-877-5657
F: 203-783-9546
E: jgill@orangeresearch.com W: orangeresearch.com
OTTO Controls
2 E. Main St. Carpentersville, IL 60110
P: 847-428-7171
E: info@ottoexcellence.com
W: otto-controls.com
Pace Mfg., Div. of Atlas Hydraulics Inc.
600 S. Sioux Brandon, SD 57005
P: 605-582-7221
F: 605-582-7222
W: pacemfg.com
Pamark, Inc.
1730-B Olson N.E. Grand Rapids, MI 49503
P: 616-456-6043
F: 616-456-8849
Panagon Systems, Inc.
51375 Regency Center Macomb, MI 48042
P: 586-786-3920
F: 586-786-7331
E: sales@panagonsystems.com
W: panagonsystems.com
Parker Fluid Control Division
95 Edgewood Ave. New Britain, CT 06051
P: 860-827-2300
F: 860-827-2384
E: skinnervalve@parker.com
W: parker.com/fcd
Parker Hannifin Accumulator and Cooler Division
6035 Parkland Blvd. Cleveland, OH 44124
P: 800-272-7537
F: 216-896-4410
E: c-parker@parker.com
W: parker.com
Parker Hannifin Hydraulic Filter Division
16810 Fulton County Road # 2 Metamora, OH 43540
P: 419-644-4311
F: 419-644-6205
W: parker.com/hydraulicfilter
Parker Hannifin Corp./Motion Systems Group 6035 Parkland Blvd. Cleveland, OH 44124
P: 800-272-7537
E: cparker@support.parker.com
W: parker.com
Parker Hannifin, Racor Division 3400 Finch Road Modesto, CA 95353
P: 800-344-3286
F: 209-529-3278
E: racor@parker.com
W: parker.com/racor
Parker Sterling Hydraulics 850 Arthur Ave. Elk Grove Village, IL 60007
P: 847-690-1333
F: 847-690-1334
E: shi@sterling-hyd.com
W: sterling-hydraulics.com
ParkerStore at Zemarc Fluid Power 2960 Los Olivos Oxnard, CA 94544
P: 805-973-5900
F: 805-973-5919
E: sales@zemarc.com
W: zemarc.com
Peninsular Cylinder Co. 27650 Groesbeck Hwy. Roseville, MI 48066
P: 586-775-7211
F: 586-775-4545
E: stevev@peninsularcylinders.com
W: peninsularcylinders.com
Pepperl+Fuchs
1600 Enterprise Parkway Twinsburg, OH 44087
P: 330-425-3555
F: 330-425-4607
E: sales@us.pepperl-fuchs.com
W: pepperl-fuchs.com
Peter Paul Electronics Co., Inc.
480 John Downey Drive New Britain, CT 06051
P: 860-229-4884
F: 860-223-1734
E: info@peterpaul.com
W: peterpaul.com
PHD, Inc.
9009 Clubridge Drive Fort Wayne, IN 46809
P: 800-624-8511
E: phdinfo@phdinc.com
W: phdinc.com
Piher International Corporation 1640 Northwind Blvd. Libertyville, IL 60048
P: 847-918-9300
F: 847-918-9433
E: paul.cain@meggitt.com W: piher.net
Pinnacle Systems, Inc. PO Box 100088 Pittsburgh, PA 15233
P: 412-262-3950 F: 412-262-4055
E: sales@pinnaclesystems.com W: pinnaclesystems.com
Pirtek USA
501 Haverty Ct. Rockledge, FL 32955 P: 321-504-4422 F: 321-504-4433 W: ownapirtek.com
Pisco USA Inc. 100 Leland Ct., Unit A Bensenville, IL 60106
P: 630-521-9920 F: 630-521-9927 E: inquiry@pisco.com W: pisco.com
Plymouth Tube Co. 29 W. 150 Warrenville Rd. Warrenville, IL 60555
P: 630-393-3550 F: 630-393-3551 W: plymouth.com
PMC A&E, Inc. 3435 Wilshire Blvd., Suite 2370
Los Angeles, CA 90010
P: 213-221-4556 F: 213-221-4557
E: info@pmcane.com W: pmcane.com
Pneumadyne Inc. 14425 23rd Ave. N Plymouth, MN 55447
P: 888-559-0177
F: 763-559-0547 E: sales@pneumadyne.com W: pneumadyne.com
Poclain Hydraulics 1300 Grandview Parkway PO Box 801 Sturtevant, WI 53177
P: 262-321-0676
F: 262-321-0703
E: info-america@poclain-hydraulics. com
W: poclain-hydraulics.com
Polymer Molding, Inc. 1655 West 20th St. Erie, PA 16502
P: 800-344-7584
F: 888-257-5566
E: pmi@polymermolding.com W: polymermolding.com
Power Drives Inc. 133 Hopkins Street Buffalo, NY 14220
P: 800-888-1373
F: 716-824-4817
E: solution@powerdrives.com W: powerdrives.com
Power Drives Inc. 3003 Pittsburgh Ave. Erie, PA 16508
P: 812-344-4351
F: 716-822-1714
E: e.knechPhone@powerdrives.com W: powerdrives.com
Power Systems AHS, LLC 8325 Commerce Drive Chanhassen, MN 55317
P: 952-361-6800
F: 952-361-6801
E: sales@powersystems-mn.com W: powersystems-mn.com
Power Valve USA 222 S. Navigation Blvd. Corpus Christi, TX 78405
P: 713-869-1064
F: 361-883-3893
E: service@powervalveusa.com W: powervalveusa.com
Poweram, Inc.
150 North 18th St. Barron, WI 54812-0153
P: 715-537-9050 W: poweram.com
PowerTech Hydraulics 305 Island Avenue Mahwah, NJ 07430
P: 201-934-9354
F: 201-934-9480
E: customer.service@p-Tech.com W: p-Tech.com
Precision Filtration Products PO Box 218 Pennsburg, PA 19087
P: 215-679-6645
F: 215-679-6648
W: precisionfiltration.com
Precision Instrument Corporation 3295 Cobb International Blvd. Kennesaw, GA 30152
P: 888-650-6923
F: 770-429-0795
E: sales@picgauges.com
W: picgauges.com
Precix, Inc.
744 Belleville Ave. New Bedford, MA 02745
P: 508-998-4030 F: 508-998-4100
E: sales@precixinc.com W: precixinc.com
Premier Thermal Solutions
209 W. Mt Hope Ave. Lansing, MI 48910
P: 517-485-5090
E: sales@premierthermal.com
W: premierthermal.com
Preso Flow Metering Equipment
8635 Washington Ave. Racine, WI 53406
P: 800-632-7337
F: 262-639-2267
E: info@preso.com W: preso.com
Pressroom Electronics PO Box 99875 Pittsburgh, PA 15233
P: 412-262-1115
F: 412-262-1197
E: sales@pressroomelectronics.com
W: pressroomelectronics.com
Pressure Components Inc.
5101 Naiman Parkway Solon, OH 44139
P: 440-349-4020
F: 440-349-3653
E: sales@pressurecomponents.com
W: pressurecomponents.com
Pressure Connections Corp. 610 Claycraft Road Columbus, OH 43230
P: 614-863-6930
F: 614-864-1327 W: pressureconnections.com
Pressure Systems Inc. 34 Research Dr. Hampton, VA 23666
P: 757-865-1243
F: 757-865-8744
E: denise.topping@pressuresystems. com
W: pressuresystems.com
Prince Mfg. Corp.
612 North Derby Lane P.O. 7000 N. Sioux City, SD 57049
P: 605-235-1220
F: 605-235-1082 W: princehyd.com
Proportion-Air, Inc. 8250 N. 600 West McCordsville, IN 46055
P: 317-335-2602
F: 317-335-3853
E: wwhite@proportionair.com W: proportionair.com
ProPulse, a Schieffer Company 9866 Kapp Ct. Peosta, IA 52068
P: 563-583-4758 F: 800-303-4673
E: sales@powermovingforward.com W: powermovingforward.com
PTI Technologies, Inc.
501 Del Norte Blvd. Oxnard, CA 93030
P: 805-604-3700
F: 805-604-3701
E: filters@ptitechnologies.com
W: ptitechnologies.com
PVS Sensors Inc. 2816 Blue Ridge Blvd. West Union, SC 29696
P: 800-831-8217
F: 864-653-1047
E: sales@pvssensors.com
W: pvssensors.com
PWM Controls Inc 185-911 Yates St Victoria, BC V8V4Y9
P: 866-719-2561
E: info@pwmcontrols.com
W: pwmcontrols.com
Quaker Chemical Corporation
One Quaker Park 901 Hector St. Conshohocken, PA 19428
P: 610-832-4173
F: 610-832-8652
E: zinkm@quakerchem.com
W: quakerchem.com
RAM Industries Inc.
33 York Road E, PO Box 5007 Yorkton, SK Canada S3N 3Z4
P: 1-877-799-1005
E: estimating@ramindustries.com
W: ramindustries.com
RAMCO Innovations 1207 Maple St. West Des Moines, IA 50265
P: 515-225-6933
F: 515-225-0063
W: ramcoinnovations.com
RB Royal Industries, Inc. 1350 S. Hickory Street Fond du Lac, WI 54937
P: 800-892-1550
F: 920-921-4713
E: sales@rbroyal.com W: rbroyal.com
Reed Switch Developments Corp. 2524 Norwood Court Racine, WI 53403
P: 262-883-9060
E: marketing@ reedswitchdevelopments.com
W: reedswitchdevelopments.com
Reelcraft Industries, Inc. 2842 East Business Hwy. 30 Columbia City, IN 46725
P: 260-248-8188
F: 260-248-2605
E: reelcraft@reelcraft.com
W: reelcraft.com
Rehobot, Inc. 3980 W. Albany St., Unit #1 McHenry, IL 60050
P: 815-385-7777
F: 815-385-7776
E: info@rehobot.us
W: rehobot.us
parker.com/electrification
Reid Tool Supply Company 2265 Black Creek Rd. Muskegon, MI 49444
P: 800-253-0421 F: 800-438-1145 W: reidtool.com
Reidville Hydraulics & Mfg., Inc. 175 Industrial Lane Torrington, CT 06790 P: 860-496-1133 F: 860-496-1166
E: info@reidvillehydraulics.com W: wwwlreidvillehydraulics.com
Reverso Pumps, Inc. 201 SW 20th St. Fort Lauderdale, FL 33315 P: 954-522-0882 F: 954-522-0456
E: contact@reversopumps.com W: reversopumps.com
RHEINTACHO Messtechnik GmbH Waltershofener Str. 1 Freiburg, Baden-Wurttenburg, Germany 79111
P: +49(0) 761 4513 0 F: +49(0) 761 445 274 E: info@rheintacho.de W: rheintacho.com
Ritepro, Inc., A Subsidiary of BRAY Int’l, Inc. 12200 Albert Hudon Blvd. Montreal, Quebec Canada H1G 3K7 P: 514-324-8900 F: 514-324-9525 E: strudel@bray.qc.ca W: ritepro.com
R J Hydraulic Inc. 967 New Castle Road Butler, PA 16001 P: 724-865-9883 F: 724-865-2501
RL Hudson & Company 2000 W Tacoma Broken Arrow, OK 74012 P: 918-259-6600 F: 918-259-6700 E: info@rlhudson.com W: rlhudson.com
Rockwell Automation, Inc. 1201 South Second St. Milwaukee, WI 53204-2496 P: 1-414-382-2000 1-888-382-1583 F: 1-414-382-4444
E: webmaster@rockwellautomation. com W: rockwellautomation.com
Rosedale Products, Inc. 3730 W. Liberty Ann Arbor, MI 48103
P: 734-665-8201 F: 734-665-2214
E: filters@rosedaleproducts.com W: rosedaleproducts.com
Rota Limited
Wellington Street
Bury, Manchester Great Britain
BL8 2BD
P: 972-359-1041
E: info@rota-ltd.com
W: rota-ltd.com
Rota-Cyl Corporation
136 Stauffer Rd.
P. O. Box 269
BechPhonesville, PA 19505
P: 610-845-8001
F: 610-845-8178
E: sales@rotacyl.com
W: rotacyl.com
Rotary Power Inc.
6009 West 41st Street, Suite 1A
Sioux Falls, SD 57106
P: 1-605-361-5155
F: 1-605-362-1949
E: info@rotarypower.com
W: rotarypower.com
Rotor Clip Company, Inc.
187 Davidson Avenue Somerset, NJ 08873
P: 732-469-7333
F: 732-469-7898
E: sales@rotorclip.com
W: rotorclip.com
RR-USA Inc.
8 Creek Parkway Boothwyn, PA 19061
P: 610-497-0154
F: 610-497-6085
E: azanellotti@rrusainc.com
W: rrusainc.com
RT Dygert
12121 Nicollet Avenue South Burnville, MN 55337
P: 952-835-1700
F: 952-835-1701
E: sales@rtdygert.com
W: rtdygert.com
Rupe’s Hydraulics Sales and Service
725 N Twin Oaks Valley Rd. San Marcos, CA 92069
P: 760-744-9350
F: 760-744-7859
E: sales@rupeshydraulics.com
W: rupeshydrualics.com
RYCO Hydraulics 1616 Greens Road Houston, TX 77032
P: 281-821-4100
F: 281-821-4300
E: sales@ryco.us W: ryco.com.au S
S.G. Morris Co., LLC
699 Miner Road Cleveland, OH 44143
P: 866-746-6774
F: 866-746-2556
E: sgmmail@sgmorris.com W: sgmorris.com
SafeWay Hydraulics, Inc.
4040 Norex Drive Chaska, MN 55318
P: 952-466-6220
F: 952-466-6219
E: info@safewayhyd.com
W: safewayhyd.com
Santest Co.Ltd/Exsenco LLC
P.O. Box 271348 Corpus Christi, TX 78414
P: 361-510-3264
E: exsenco@gmail.com W: exsenco.com
Scenery Hydraulic, Inc. 1939 S. Lake Pl. Ontario, CA 91761
P: 909-930-9586 F: 909-354-3181
E: kai@sceneryhydraulic.com W: sceneryhydraulic.com
Schmalz, Inc. 5200 Atlantic Avenue Raleigh, NC 27616
P: 919-713-0880
F: 919-713-0883
E: schmalz@schmalz.com W: schmalz.com
Schroeder Industries 580 W. Park Road Leetsdale, PA 15056
P: 724-318-1100
F: 724-318-1200
E: sisales@schroederindustries.com W: schroederindustries.com/ Schunk Inc.
241 Kitty Hawk Dr. Morrisville, NC 27560
P: 919-572-2705
F: 919-572-2818
E: info@us.schunk.com W: schunk.com
Scorpion Technologies Ltd. #953 Laval Cr. Kamloops, BC Canada V2C 5P4
P: 250-377-4399 F: 250-377-4036
E: bill@controlgrips.com W: controlgrips.com
Seal Master Corporation 368 Martinel Dr. Kent, OH 44240
P: 330-673-8410
F: 330-673-8242
E: info@sealmaster.com
W: sealmaster.com
Sensor Data Technologies 50207 Hayes Road Shelby Township, MI 48375
P: 586-739-4254
F: 586-739-5689
E: sales@sensordata.com W: sensordata.com
Silicon Designs, Inc. 13905 NE 128th Street
Kirkland, WA 98034
E: sales@silicondesigns.com
W: silicondesigns.com
Simerics, Inc. 303 Williams Ave., Suite 123 Huntsville, AL 35801
P: 256-489-1480 F: 256-489-1460 E: contact@simerics.com W: simerics.com
Simonds Inc. 248 Elm St. Southbridge, MA 01550
P: 866-764-3235 F: 508-765-5125
E: sales@simonds-inc.com W: simonds-inc.com
Simrit 2250 Point Blvd., Ste. 230 Elgin, IL 60123 P: 866-274-6748 F: 847-783-6519 E: information@simrit.us W: simritna.com
SIWI, Inc. P.O. Box 1415 Glendora, CA 91740 P: 626-963-7643 F: 626-963-3612
Sensor Systems LLC
2800 Anvil Street North St. Petersburg, FL 33710
P: 727-347-2181
F: 727-347-7520
E: sales@vsensors.com W: vsensors.com
Sensotec Inc. 2080 Arlingate Ln. Columbus, OH 43228
P: 800-848-6564
F: 614-850-1111
W: sensotec.com
SERFILCO, Ltd.
2900 MacArthur Blvd. Northbrook, IL 60062
P: 847-509-2900
F: 847-559-1995
E: sales@serfilco.com
W: serfilco.com
Service Hydraulics, LLC.
222 S. Navigation Blvd. Corpus Christi, TX 78405
P: 361-883-3891
F: 361-883-3893
E: info@servicehyd.com
Servi Fluid Power Inc. 22240 Merchants Way, Suite #100 Katy, TX 77449
P: 281-347-8080
E: info@sfphyd.com
W: sfphyd.com
ServoTek Products, Inc. 8019 Ohio Riser Boulevard Newell, WV 26050
P: 304-387-1200
F: 304-387-1212
E: customerRFQ@marshbellofram. com W: servotek.com
Seventy-Three Mfg. Co. Inc. 136 Stauffer Road, PO Box 269 BechPhonesville, PA 19505
P: 610-845-7823
F: 610-845-7824
E: sales@seventythreemfg.com
SFC KOENIG LLC 73 Defco Park Road North Haven CT 06473
P: 203-245-1100
F: 203-245-3072
E: info-us@sfckoenig.com
W: sfckoenig.com
Sierra Instruments, Inc. 5 Harris Ct, Bldg. L Monterey, CA 93940
P: 831-373-0200
F: 831-373-4402
E: info@sierrainstruments.com
W: sierrainstruments.com
SIKO Products, Inc.
2155 Bishop Circle East Dexter, MI 48130
P: 734-426-3476
E: sales.us@siko-global.com W: siko-global.com
Spencer Fluid Power
19308 68th Ave. South Kent, WA 98032
P: 253-796-1100 F: 253-796-1101
W: spencerfluidpower.com
Spencer Fluid Power 2700 N. Hwy. 14-16 Gillette, WY 82716
P: 307-682-5858
F: 307-687-2040
W: spencerfluidpower.com
SPhonemi America Inc. 1601 Brooks Dr. Marshall, MI 49068
P: 269-781-6222
F: 269-781-7723
E: info@sPhonemiamerica.com W: sPhonemiamerica.com
SPIR STAR, Ltd. 10002 Sam Houston Center Dr. Houston, TX 77064
P: 800-890-7827
F: 888-893-1255
E: sales@spirstar.com W: spirstar.com
SKF/Lincoln Lubrication Systems 5148 N. Hanley Road St. Louis, MO 63134
P: 800-435-9599 F: 800-424-5359 E: brenda.hendricks@skf.com W: lincolnindustrial.com
Smalley Steel Ring Company 555 Oakwood Road Lake Zurich, IL 60047 P: 847-719-5900 F: 847-719-5999 E: info@smalley.com W: smalley.com
Snap-tite Quick Disconnect & Valve Div. 201 Titusville Road Union City, PA 16438 P: 814-438-3821 F: 814-438-3069 E: qdv_sales@snap-tite.com W: Snap-titeQuickDisconnects.com
Solenoid Solutions, Inc 2251 Manchester Road Erie, PA 16506 P: 814-838-3190
E: tmartin@solenoidsolutionsinc. com W: solenoidsolutionsinc.com
Sonic Hydraulics/Sonic Tractor Parts 1780 NW 93rd Ave. Doral, FL 33172 P: 305-594-0777 F: 305-594-7798
E: sales@stpusa.com W: stpusa.net
Source Fluid Power 331 Lake Hazeltine Drive Chaska, MN 55318 P: 952-368-3866 F: 952-448-3392 W: sourcefp.com
Spartan Scientific 230 McClurg Rd Youngstown, OH 44512
P: 330-758-8446
E: customerservice@ spartanscientific.com W: spartanscientific.com
Specialty Fittings Incorporated 18151 Territorial Road Dayton, MN 55369
P: 763-428-7137
F: 763-428-6487
E: sales@specialtyfittings.com
W: specialtyfittings.com
Spectroline Industrial 956 Brush Hollow Road Westbury, NY 11590
P: 516-333-4840
F: 516-333-4859
E: info@spectroline.com W: spectroline.com
Sponsler, Inc. 2363 Sandifer Blvd. Westminster, SC 29693
P: 864-647-2065 F: 864-647-1255
E: dbourgeois@idexcorp.com W: sponsler.com
Sprague Products 10195 Brecksville Rd. Brecksville, OH 44141
P: 440-838-7690 F: 440-838-7528 E: Sprague@curtisswright.com W: sprague.cwfc.com
Stafford Manufacturing Corp. P.O. Box 2370 Woburn, MA 01888 P: 800-695-5651 F: 800-649-5101
E: sales@staffordmfg.com W: staffordmfg.com
Stanley M. Proctor Company 2016 Midway Dr. Twinsburg, OH 44087 P: 330-425-7814 F: 330-425-3222 W: stanleyproctor.com
STAUFF Corporation 7 Wm Demarest Place Waldwick, NJ 07463 P: 201-444-7800
E: sales@stauffusa.com W: stauffusa.com
Steelhead Composites 500 Corporate Circle, Suite 0 Golden, CO 83440
P: 720-524-3360
E: sales@steelheadcomposites.com W: steelheadcomposites.com
Steffen Inc. 621 West 7th Street Sioux City, IA 51103
P: 712-279-8030 F: 712-279-8071
W: steffenhydro.com
Sterling Hydraulics, Inc. 850 Arthur Ave. Elk Grove Village, IL 60007
P: 847-690-1333
F: 847-690-1334
E: shi@sterling-hyd.com W: sterling-hyd.com
Stiebel Drive Technology Inc. 319 Garlington Road, Unit B-11 Greenville, SC 29615
P: 864-286-7152
E: t.ruiz@stiebel-drives.com
W: stiebeldrivetechnology.com
Strong Forge & Fabrication, LLC 20 Liberty Street Batavia, NY 14020
P: 585-343-5251
F: 585-343-5829
E: info@strongforge.com
W: StrongForge.com
SUCO ESI North America
6560 W. Rogers Circle, Suite 22
Boca Raton, FL 33487
P: 561-989-8499
E: sales@sucoesi.com
W: sucoesi.com
Sun Hydraulics Corporation
1500 University Parkway
Sarasota, FL 34233
P: 941-362-1200
F: 941-355-4497
E: stevetberlin@sunhydraulics.com
W: sunhydraulics.com
Sunfab Hydraulics Inc.
6426 Hendry Road, Suite A Charlotte, NC 28269
P: 704-509-6435
E: sunfab-us@sunfab.com
W: sunfab.com/us
SunSource
12800 Hwy 13 South #100 Savage, MN 55378
P: 952-563-1700
E: mecsolutions@sunsrce.com
W: sun-source.com
Super Swivels
7917 Beech St. NE Minneapolis, MN 55432
P: 763-784-5531
E: sales@superswivels.com
W: superswivels.com
SVF Flow Controls, Inc.
13560 Larwin Circle Santa Fe Springs, CA 90670
P: 562-802-2255
F: 562-802-3114
E: Jeanette@svf.net
W: svf.net
Swanson Industries
2608 Smithtown Road Morgantown, WV 26508
P: 800-327-6203
F: 304-292-8151
E: industrialsales@ swansonindustries.com
W: swansonindustries.com
Switches Unlimited 34-11 56th Street Woodside, NY 11377
P: 800-221-0487
F: 718-672-6370
E: info@switchesunlimited.com
W: switchesunlimited.com
Switching Solutions Inc.
380 Four Valley Drive
Concord, ON Canada L4K 5Z1
P: 905-303-8700
F: 905-303-7256
E: sales@switchingssi.com
W: switchingssi.com
Sync-Lok, Inc.
407 Newburg Avenue Catonsville, MD 21228
P: 410-869-3480
F: 410-869-3482
E: info@sync-lok.com
W: sync-lok.com
System Seals, Inc.
24202 Aurora Rd. Cleveland, OH 44146
P: 440-735-0200
F: 440-735-0288
E: info@systemseals.com
W: systemseals.com
T
Tahoma Engineered Solutions
532 County Road 1600 Ashland, OH 44805
P: 419-496-0964 x203
E: sales@ tahomaengineeredsolutions.com
W: tahomaengineeredsolutions.com
Taiwan PU Corporation
760 Oak Grove Dr. San Jose, CA 95129
P: 408-839-2919
E: sales@taiwanpu.com
W: TaiwanPU.com
Tapeswitch Corporation
100 Schmitt Blvd. Farmingdale, NY 11735
P: 631-630-0442
F: 631-630-0454
E: marketing@tapeswitch.com W: tapeswitch.com
TE Connectivity 1050 Westlakes Drive Berwyn, PA 19312
P: 610-893-9800
E: mary.manzo-ritchie@te.com W: te.com
Terex Utilities, Inc. 3400 NE 37th Place Wildwood, FL 34785
P: 352-330-4044 F: 352-330-4047
E: mike.shannon@terexutilities.com W: terex.com
Texacone 4111 Forney Ave. Mesquite, TX 75149
P: 800-235-2727 F: 972-289-6285
E: information@texacone.com W: texacone.com
Texas Hydraulics, Inc. 3410 Range Road Temple, TX 76504
P: 254-778-4701 F: 254-774-9940 E: sales@texashyd.com W: texashydraulics.com
Texcel Rubber 4444 Homestead Rd. Houston, TX 77028
P: 800-231-7116
F: 800-759-4673
E: sales@texcelrubber.com W: texcelrubber.com
The FPDA – Motion + Control Network 105 Eastern Avenue, Suite 104 Annapolis, MD 21403
P: 410-940-6347 F: 410-263-1659
E: aluckado@fpda.org W: fdpa.org
Thermal Transfer Products 5215 21st St. Racine, WI 53406
P: 800-394-8330
F: 262-554-8536
E: thermal_transfer_sales@ thermasys.com W: thermasys.com
Thomas Magnete USA, LLC 3225 Gateway Rd, Suite 350 Brookfield, WI 53045
P: 262-781-2900
E: heinz.strickler@thomas-magnete. com W: thomas-magnete.com
Thomas Products 987 West Street Southington, CT 06489
P: 800-666-9101
F: 860-621-1470
E: thomsales@aol.com W: thomasprod.com
Titan Inc. 9900 Durand Ave. Sturtevant, WI 53177
P: 262-884-2890
F: 262-884-8072
E: tevans@titansystems.com W: titansystems.com
T-Lon Products, Inc. 1110 Richards Road Hartland, WI 53029
P: 262-367-2333
F: 262-367-8159
E: dolson@t-lon.com W: t-lon.com
Tobeyco Mfg. Co., Inc. Federal Brass Division 165 Cedar St. Corning, NY 14830
P: 607-962-6054
F: 607-962-8871
Tobul Accumulator, Inc. 61 Innovation Drive Bamberg, SC 29003
P: 803-245-2400
F: 803-245-2636
E: sales@tobul.com W: tobul.com
TR Engineering Inc. 1350 Green Hills Rd. Suite 10 Scotts Valley, CA 95066
P: 831-430-9920
F: 831-430-9989
E: sales@trengineering.com W: trengineering.com
Transcom Inc.
3451 W. Burnsville Pkwy. Burnsville, MN 55337
P: 800-328-2840
F: 952-894-1588
Trelleborg Sealing Solutions
2531 Bremer Road Fort Wayne, IN 46803
P: 260-749-9631
E: tssusa@trelleborg.com
W: trelleborg.com/en/seals
Triad Technologies, LLC 985 Falls Creek Dr. Vandalia, OH 45377
P: 800-420-8575 F: 800-420-4324
E: sales@triadtechnologies.com W: triadtechnologies.com
Trident 408 Defiance Ave. Hicksville, OH 43526
P: 419-542-7721
F: 419-542-8717
E: trident@ tridentconnection.com W: tridentconnection.com
Triple R America
60/040 Industrial Pkwy. Cheektowaga, NY 14227
P: 800-668-8671
F: 416-413-9387
E: sales@triple-rrr.com W: triple-rrr.com
Tubes n’ Hoses
820 N. Dallas Ave Lancaster, TX 75146
P: 972-923-0766 F: 972-332-4119
E: sales@tubesnhoses.com
W: tubesnhoses.com
Turbines, Inc.
112 Lumber Ln. Seneca, SC 29615
P: 864-882-4544
E: mweiss@turbinesincorporated. com
W: turbinesincorporated.com
Turck Inc.
3000 Campus Drive Minneapolis, MN 55441
P: 800-544-7769
F: 763-509-7797
E: turckusa@turck.com
W: turck.us
Turner Hydraulics 1605 Industrial Dr. Carlisle, PA 17013
P: 717-243-3329
E: sales@turnerhydraulics.com W: www.turnerhydraulics.com
Tusker Hydraulics
6600 Westown Pkwy., Suite 255 West Des Moines, Iowa 50266
P: 515-974-5645
F: 515-309-9715
E: sales@tuskerhydraulics.com/rj@ tuskerhydraulics.com W: tuskerhydraulics.com
Tuthill Coupling Group 1000 West Bagley Rd. Berea, OH 44017
P: 440-826-1115 F: 440-826-0115
E: hansencoupling@tuthill.com W: tuthill.com
Tuthill Pump Group, Concord Operator 5143 Port Chicago Hwy. Concord, CA 94520
P: 925-676-8000 F: 925-676-8151 E: concord@tuthill.com W: pumptales.com
Tuxco Corporation 4300 Grove Ave. Gurnee, IL 60031
P: 800-613-6979 F: 847-244-7335 E: moreinfo@tuxco.com W: tuxco.com U
UFI - Hydraulic Filter Division 9337 Ravenna Rd., Unit G Twinsburg, OH 44087
P: 330-405-1800 F: 330-405-1801
E: sales@uhiltd.com W: uhiltd.com
UHI LTD
9337 Ravenna Rd. #G Twinsburg, OH 44087
P: 330-405-1800
F: 330-405-1801
E: sales@uhiltd.com
W: uhiltd.com
TECHNOLOGIES CORP.
Global Leader in Contamination Control
Ultra Clean Technologies Corp. 1274 Highway 77 Bridgeton, NJ 08302
P: 856-451-2176
F: 856-453-4975
E: briley@ultracleantech.com
W: ultracleantech.com
Ultraflo Corporation, A subsidiary of BRAY International, Inc. #8 Trautman Industrial Drive Ste. Genevieve, MO 63670
P: 800-950-1762
F: 573-883-8882
E: ultraflo@ultraflovalve.com
W: ultraflovalve.com
Unique Automation LLC 612 East Main Street Palmyra, NY 14522
P: 315-597-4900
F: 315-597-4953
E: C.Schaufelberger@ uniqueautomation.com
W: uniqueautomation.com
United Electric Controls 180 Dexter Ave. Watertown, MA 02478
P: 617-926-1000
F: 617-926-4354
E: marketing@ueonline.com
W: ueonline.com
Universal Grinding Corporation 1234 West 78th Street Cleveland, OH 44102
P: 216-631-9410
F: 216-631-5264
E: monica@universalgrinding.com
W: universalgrinding.com
Universal Hydraulics Intl., Ltd. 9337 Ravenna Rd. Unit G Twinsburg, OH 44087
P: 330-405-1800
F: 330-405-1801
E: sales@uhiltd.com
W: uhiltd.com
Universal Hydraulik USA Corp. Fort Meigs Business Center 25651 Ft. Meigs Rd., Suite A Perrysburg, OH 43551 P: 1-419-873-6340 F: 1-419-873-6341
E: info@universalhydraulik.com W: universalhydraulik-usa.com
V & P Hydraulic Products 1162 Peachblow Rd. Lewis Center, OH 43035 P: 740-548-5181 F: 740-548-6206 E: mikeueber@vphyd.com W: vphyd.com
Validyne Engineering 8626 Wilbur Ave. Northridge, CA 91324
P: 818-886-2057 F: 818-886-6512
E: sales@validyne.com W: validyne.com
Van Air Inc. 2950 Mechanic St. Erie, PA 16506
P: 814-774-2636
F: 814-774-0778
E: info@vanairsystems.com W: vanairsystems.com
Veethree Electronics & Marine LLC 2420 Trailmate Drive Sarasota, FL 34243
P: 941-538-7775
F: 941-755-1222
E: sales@veethree.com
W: v3instruments.com
Ventura Hydraulic and Machine Works, Inc. 1555 Callens Rd. Ventura, CA 93003
P: 805-656-1760 F: 805-525-2739 W: venturahydraulics.com
Vescor Corp. 50 North River St. South Elgin, IL 60177 P: 847-742-7270 F: 847-742-5187 E: sales@vescor.com W: vescor.com
VEST, Inc. 3250 W. Big Beaver Rd., #440 Troy, MI 48084 P: 248-649-9550 F: 248-649-9560 E: sales@vestusa.com W: vestusa.com
Viatran 199 Fire Tower Drive Tonawanda, NY 14150 P: 1-800-688-0030 F: 716-693-9162 E: solutions@viatran.com W: viatran.com
Vogelsang Fastener Solutions 1790 Swarthmore Ave., Suite 1 Lakewood, NJ 08701 P: 732-364-4422 F: 732-364-8111 E: bpappas@vogelsangfastner.com W: vogelsangfastner.com/
Voith Turbo 25 Winship Road York, PA 17406 P: 717-767-3200 F: 717-767-3210
E: bob.snopek@voith.com W: voith.com
Von Ruden Mfg., Inc. 100B First St. NE Buffalo, MN 55313 P: 763-682-3122 F: 763-682-3954
E: sales@vonruden.com W: vonruden.com
Vonberg Valve, Inc. 1380 Norwood Avenue Itasca, Illinois 60143 P: 847-259-3800 F: 1-847-259-3997 E: sales@vonberg.com W: vonberg.com W
Wainbee Ltd. 5789 Coopers Avenue Mississauga ONT Canada L4Z 3S6 P: 905-568-1700 F: 905-568-0083 E: marketing@wainbee.com W: wainbee.com
Wandfluh of America, Inc. 909 High St. Mundelein, IL 60060 P: 847-566-5700 F: 847-566-5733 E: sales@wandfluh-us.com W: wandfluh-us.com
Warner Electric 449 Gardner St. So. Beloit, IL 61080 P: 815-389-3771 F: 815-389-2582 E: info@warnerelectric.com W: warnerelectric.com
Warren Electric Corporation. 36 Franklin St., P.O. Box 86 Warren, RI 02885 P: 401-245-3700 F: 401-245-9331 E: luann@warrene.com W: warrene.com
Waterclock Engineering 342 N. Water St. #600 Milwaukee, WI 53202
P: 888-902-2297
E: info@waterclockeng.com W: waterclockeng.com
Webtec LLC
1290 E. Waterford Ave
St. Francis, WI 53235
P: 1-800-932-8378
E: sales-us@webtec.com
W: webtec.com
Weiss Instruments, Inc. 905 Waverly Ave.
Holtsville, NY 11742
P: 631-207-1200
F: 631-207-0900
E: sales@weissinstruments.com
W: weissintsuments.com
Wen Technology, Inc.
8411 Garvey Drive, Suite 117
Raleigh, NC 27616
P: 919-954-1004
F: 919-954-1009
E: wentec@wentec.com
W: wentec.com
Wessel-Hydraulik GmbH 2144 Burbank Dr. Mississauga, Ontario CANADA L5L 2T8
P: 905-828-5579
F: 905-828-8189
E: wesselhydraulics@rogers.com
W: wessel-hydraulik.de
West Coast Fluid Power 5370 S. Watt Ave. Suite 300 Sacramento, CA 95826
P: 800-532-8837 F: 800-370-0447 E: info@comoso.com W: comoso.com
Western Hydrostatics, Inc. 1956 Keats Dr. Riverside, CA 92501
P: 951-784-2133
F: 951-784-8423
E: pjmaluso@weshyd.com W: weshyd.com
Western Integrated Technologies, Inc. 13406 SE 32nd St Bellevue, WA 98005
P: 425-747-0927
F: 425-747-0940
E: jjohnston@westernintech.com W: westernintech.com
Wetherell Mfg Co., Inc. 407 W. Grace St. Cleghorn, IA 51014
P: 712-436-2266
F: 712-436-2672
E: info@wetherellmfg.com W: wetherellmfg.com
IS YOUR DIRECTORY LISTING UP-TO-DATE?
Have there been changes to your business’s name, address, phone or fax number, email address or web address? Let us know as soon as possible to ensure a correct listing in the next directory.
» INCLUDE YOUR BUSINESS in this extensive directory of businesses from the fluid power industry. Four categories give you the best chance to be seen by the decision-makers relevant to your business.
» Visit fluidpowerjournal.com/contact
White Drive Products, Inc.
P.O. Box 1127
110 Bill Bryan Blvd. Hopkinsville, KY 42241
P: 270-885-1110
F: 270-886-8462
E: info@whitedriveproducts.com W: whitedriveproducts.com
Whitman Controls Corp. 201 Dolphin Rd. Bristol, CT 06010
P: 860-583-1847
F: 860-583-5293
E: info@whitmancontrols.com W: whitmancontrols.com
WIKA Instrument Corp. 1000 Wiegand Blvd. Lawrenceville, GA 30043
P: 770-513-8200
F: 770-338-5118
E: info@wika.com W: wika.com
Wilkes & McLean 600 Estes Ave. Schaumburg, IL 60193
P: 847-534-2000 F: 847-534-2016
E: info@wilkesandmclean.com W: wilkesandmclean.com
Wilson Company 16301 Addison Road Addison, TX 75001
P: 972-931-8666
F: 972-248-7472
W: wilson-company.com
Winters Instruments Airport Commerce Park 455 Cayuga Rd., Suite 650 Buffalo, NY 14225
P: 716-874-8700 F: 716-874-8800 E: usasales@winters.com W: winters.com
Wojanis Supply Company 1001 Montour West Industrial Park Coraopolis, PA 15108
P: 724-695-1415 F: 724-695-1203
E: sales@wojanis.com W: wojanis.com
Womack Machine Supply Company 13835 Senlac Drive Farmers Branch, TX 75234
P: 800-569-9800 F: 214-350-9322
E: sales@womack-machine.com
W: womackmachine.com
World Wide Fittings, Inc. 600 Corporate Woods Parkway Vernon Hills, IL 60061
P: 847-588-2200
F: 847-588-2212
E: sales@worldwidefittings.com W: worldwidefittings.com
World Wide Metric 37 Readington Road Branchburg, NJ 08876
P: 732-247-2300
F: 732-247-7258
E: sales@worldwidemetric.com
W: worldwidemetric.com
Worthington AG Parts 122 St. George Lane Sikeston, MO 63801
P: 800-637-5165
E: dbell@worthingtonagparts.com
W: worthingtonagparts.com
Yates Industries Inc. 23050 East Industrial Drive St. Clair Shores, MI 48080
P: 586-778-7680 F: 586-778-6565
E: sales@yatesind.com W: yatesind.com
York Precision Machining & Hydraulics
706 Willow Springs Lane York, PA 17406 P: 717-764-8855
E: mbaker@yorkpmh.com W: yorkPMH.com
Youli-America 222 S. Navigation Blvd. Corpus Christi, TX 78405
P: 713-861-8041
F: 361-883-3893
E: service@youli-america.com W: youli-america.com
Young Engineering and Mfg. Inc. 560 W Terrace Dr. San Dimas, CA 91773
P: 909-394-3225
F: 909-394-3006
E: sales@youngeng.com W: youngeng.com
Young Powertech Inc. 3060 Plaza Drive #107 Garnet Valley, PA 19060
P: 610-558-0760 F: 610-558-0762
E: info@youngpowertech.com W: youngpowertech.com
Yuken/ALA Industries Limited (North American Distributor) 1150 Southpoint Circle, Suite D Valparaiso, IN 46385
P: 877-419-8536 F: 219-477-4194
E: alaindustries@yuken-usa.com
W: yuken-usa.com Z
Zatkoff Seals & Packings 23230 Industrial Park Dr. Farmington Hills, MI 48335
P: 800-96-SEALS F: 298-428-3392
E: info@zatkoff.com W: zatkoff.com
Zemarc Engineering 6431 Flotilla Street Los Angeles, CA 90040
P: 323-721-5598
F: 323-722-2220
E: sales@zemarc.com
W: zemarc.com
Zemarc Fluid Power 1801 Addison Way Hayward, CA 94544
P: 510-783-3964
F: 510-783-1143
E: sales@zemarc.com W: zemarc.com
Zemarc Fluid Power – Authorized Service Center 3510 E. Church Avenue Fresno, CA 93725
P: 559-264-2009 F: 559-268-2361
E: sales@zemarc.com
W: zemarc.com/service
Zemarc Fluid Power & Ventura Parker Store 2960 Los Olivos Oxnard, CA 94544
P: 805-973-5900
F: 805-973-5919
E: sales@zemarc.com
W: zemarc.com
Zinga, A Filtration Group Company 2400 Zinga Drive Reedsburg, WI 53959
P: 608-524-4200
F: 608-524-4220
E: zinga@zinga.com
W: filtrationgroup/brands/zingaindustries-inc
ZMC Corporation 6431 Flotilla Street Los Angeles, CA 90040
P: 323-767-2212
E: caguirre@zmccorp.com
W: zmccorporation.com
ZSI 42550 Executive Drive Canton, MI 48188
P: 800-323-7053
F: 734-844-0066
E: twright@zsi-inc.com
W: zsi-inc.com
PRODUCT SPOTLIGHT
HYDRAULIC NOISE, SHOCK
VIBRATION SUPPRESSOR
●
● Eliminates Pulsation
● Increases Longevity
● Reduces Vibration
● Easy Inline Install
● Absorbs Hydraulic Shock
QUALITY NACOL ACCUMULATORS
● Forged Shells, no welds
● Long lasting, No Seam, Pleated Bladders
● We stock ⅕ pint to 15 gallons in Chicago
● Sizes available to 40 gallons
877-534-6445 - www.wilkesandmclean.com - info@wilkesandmclean.com
•
• No expensive hardware
• No more rags stuffed into hoses
• No more messy plastic caps
• The ultimate contamination control tool
• One hand installation
• Eliminate hydraulic oil spills & clean up
• Quick installation & ease of usage
• Safe for personnel & environment
• Industry acclaimed
Metric Solution:
Solving for the size of the cylinder; Area of rod = 1963.5 mm², Force = 33,360 N; F= PA; 33,360/.71 = 46,985.92 mm² (area); 46,985.82 + 1963.5 (rod area) = 48,949.42 mm² needed area. Find diameter using A = D² x .7854; Sq. Root of (50,409.72/.7854) = 249.65 mm diameter Round up to 250 mm in diameter.
“A” has 4/9 of the total load. 33,360 x 4/9 = 14,826.67 N.; 14,826.67/4 cables on the movable pully = 3,706.67 N.
“B” has 5/9 of the total load. 33,360 x 5/9 =18,533.33 N.; 18,533.33 /6 cables on the movable pully = 3,088.88 N.
US Customary Solution:
7500 lbs. /100 psi = 75 sq. in. EREA needed, 75 + 3.14 sq. in. of rod = 78.14 sq. in. total. Using A = D² x .7854; Sq. root of (78.14 / .7854) = 10 in diameter.
“A” has 4/9 of the total load. 7500 x 4/9 = 3333.33 lbs. There are 4 cables on the movable pully. 3333.33 / 4 = 833.33 lbs.
“B” has 5/9 of the total load. 7500 x 5/9 = 4166.67 lbs. There are 6 cables on the movable pully. 4166.67 / 6 = 694.44 lbs.
almomanifold.com
HYDRAULIC FLANGES + COMPONENTS
Company
Alkon Corp 7
ADVERTISER INDEX
Web
419-333-7000 alkoncorp.com
Allegheny York LLC 19, 23 717-266-6617 alleghenyyork.com
Almo Manifold 35 989-984-0800 almomanifold.com
Assured Automation 5
Canfield Connector 6
1-800-899-0553 assuredautomation.com/fpj
1-800-554-5071 canfieldconnector.com
Continental Hydraulics/Hydreco 3 952-894-6400 continentalhydraulics.com
COXREELS 18
Delta^Q 7
1-800-269-7335 coxreels.com
1-800-650-3110 deltaq.com
Deublin Co 24 1-847-689-8600 deublin.com
Diamond Hydraulics 3, 24 409-986-3957
Essentra Components 18, 24
diamondhydraulics.com
1-800-847-0486 essentracomponents.com
EUFMC 11 757-220-1795 eufmc.com
Flange Lock 9, 34 203-861-9400 flangelock.com
FluiDyne Fluid Power 25, 35 586-296-7200 fluidynefp.com
HAWE North America, Inc 21 704-509-1599 hawe.com
HED Inc 26, 33 262-673-9450 hedcontrols.com
HydraForce IFC 847-793-2300 hydraforce.com
Main Mfg Products 6, 35 1-800-521-7918 mainmfg.com
Motion Industries OBC 1-800-526-9328 motion.com
MP Filtri USA Inc 28, 33 215-529-1300 mpfiltriusa.com
National Tube Supply 36 1-800-229-6872 nationaltubesupply.com
Parker Hannifin Corp 13, 29 419-644-4311 parker.com/electrification
SPIR STAR Ltd 7, 30 1-800-890-7827 spirstar.com
Super Swivels 6 763-784-5531 superswivels.com
Ultra Clean Technologies IBC 1-800-791-9111 ultracleantech.com
Wilkes & McLean Ltd 34 877-534-6445 wilkesandmclean.com
Yates Cylinders, Inc 1 586-778-7680 yatesind.com
National Tube Supply’s fluid power products are precisely manufactured and expertly finished to minimize leakage and ensure longer seal life and optimum performance.
Our experienced team is always available to help customers identify the best product for their project specifications, quality requirements and bottom line. We’ll even work with you to set forecasts for JIT delivery management!
Hydraulic Fluid Line Tubing
Cylinder Barrels
Pneumatic Cylinder Tubing
Pump Barrels
Honed Steel Tubing
Chrome ID Tubing
Chrome OD Tubing
DOM Tubing
Seamless Steel Tubing
Chrome Plated Piston Rods
1045 Steel
Ductile Iron & Alloy
We have a massive inventory at your disposal with 8 locations across North America – most orders ship next day!
The Right Supply, Right On Time.
