Mobile Pneumatics Catalogue by Norgren

Commercial Vehicles

Mobile Solutions

Experience and Expertise in Commercial Vehicles With over 40 years experience working directly with global commercial vehicle manufacturers, IMI Precision Engineering offer a comprehensive range of pneumatic, hydraulic, electronic and vacuum solutions covering every major vehicle system, from the front bumper to the rear Our range of cab, chassis and powertrain solutions deliver fuel efficiency, emissions reduction and faster assembly times for the worldâ&#x20AC;&#x2122;s leading commercial vehicle manufacturers. Acknowledged for their safe and reliable operation, our products are proven over millions of miles of reliable service. We understand the market trends, environmental challenges, emissions standards and specifications that matter to truck manufacturers and Tier 1 suppliers.

Off-Highway 01

Visit www.imi-precision.com

We are a specialised partner to OEMâ&#x20AC;&#x2122;s and Tier 1 suppliers focusing on agriculture and construction segments and understand the need to develop scalable, crosssegment type solutions. Whether adopting On-High powertrain technologies or value engineering product performance according to local market requirements: Our application specialists and dedicated program teams support our customers from initial enquiry throughout program life-time.

Big product portfolio for Tankers

Visit www.imi-precision.com

Solutions for the Agriculture vehicles

Contents

1 2

VALVES

AIR PREPARATION (FRL)

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

69 FUEL TANK CAPS 72 RETURN FLOW SPLITTER 74 FUEL TANK VENT 75 HIGH-FLOW FUEL TANK VENT 76 LINEGARDÂ® BREAKAWAY VALVES

80 106 108 144 148 152 157 159

IN-LINE VALVES AND VALVE ISLANDS SOLENOID POPPET VALVES MANUAL AND MECHANICAL VALVES NATURAL GAS VALVES OTHER VALVES AND ACCESSORIES SEAT AND DASH VALVES TOGGLE SWITCHES FLIPPER CONTROL VALVES

167 COMBINATION FILTER/REGULATOR & LUBRICATOR 168 PRESSURE REGULATORS

174 ELECTRO-MECHANICAL PRESSURE SWITCH 177 PNEUFIT 191 DOT, TUV COMMERCIAL VEHICLE PUSH TO CONNECT FITTINGS 228 EXHAUST GUARD 229 LOW PRESSURE ROTOWINKS 230 HIGH PRESSURE ROTOWINKS 231 AIR PREPARATION ACCESSORIES 232 SHUTTLE VALVE 233 TUBING & HOSES 235 SERIES PA2 237 INLINE PRESSURE PROTECTION VALVES (PPV)

Whereas all products in this catalogue are suitable for use within the auxiliary air system on board vehicle some products can also be used within the primary air system, air brake circuits and power train applications. Please check individual product specifications to ensure its suitability for the application intended and if in any doubt please contact IMI Precision Engineering directly for advice.

Visit www.imi-precision.com

FUEL SYSTEMS

ROUNDLINE CYLINDERS COMPACT CYLINDERS PROFILE CYLINDERS SERVO MOTOR

ACTUATORS

39 46 56 63

Engineering GREAT solutions through people, products, innovation and service IMI Precision Engineering is a world-leader in fluid and motion control. Building close, collaborative relationships with our customers, we gain a deep understanding of their engineering needs and then mobilise our resources and expertise to deliver distinctive products and solutions.

Visit www.imi-precision.com

Wherever precision, speed and engineering reliability are essential, our global footprint, problem-solving capability and portfolio of high performance products enables us to deliver GREAT solutions which help customers tackle the worldâ&#x20AC;&#x2122;s most demanding engineering challenges. > Reliability We deliver and support our high quality products through our global service network. > High performance products Calling on a world-class portfolio of fluid and motion control products including IMI Norgren, IMI Buschjost, IMI FAS, IMI Herion and IMI Maxseal. We can supply these singlely, or combined in powerful customised solutions to improve performance and productivity. > Partnership & Problem Solving We get closer to our customers to understand their exact challenges.

Visit www.imi-precision.com

Sales & Service in 75 countries

North America

USA Visit www.imi-precision.com

MEXICO

South America BRAZIL

Europe 07

Asia

CZECH REPUBLIC

GERMANY CHINA

Africa

INDIA MALAYSIA SINGAPORE

Australia

New Zealand

Visit www.imi-precision.com

JAPAN

Powertrain Engine We provide high performance pneumatic and electric control using innovative valve and actuation technology for all current and future engine control requirements. The solutions we provide meet the challenging temperature and vibration requirements of todayâ&#x20AC;&#x2122;s heavy duty trucks and off-highway engines. Typical Applications include: > Inlet Throttle > Variable-geometry turbocharger control > Engine control multifunction valve block > EGR Control

Smart wastegate turbo control

> Engine exhaust brake control > Aftertreatment SCR components

Inlet throttle

Multifunction valve block

EGR control

High cycle life

Visit www.imi-precision.com

Exhaust brake control

Urea tank heating valve Accurate

Minimal parts

Fast

Low leakage

Reliable

Proven design Accurate

Robust Lightweight

Compact

Low power consumption

Powertrain Transmission Our transmission products are built to be reliable, robust and reduce weight. Solutions providing pneumatic assistance on manual transmissions and high performance solenoid valve technology for automated manual transmission (AMT). Typical Applications include: > Transmission gear shifting control > Retarder control valves > Pneumatic assisted Manual transmission control > Driver efficiency improvements such as range shift interlocks

Filter regulator AMT Control

Master control valve

Double 'H' valve

Shift inhibit Filter regulator

Visit www.imi-precision.com

Retarder control

Visit www.imi-precision.com

Tractor control system increases driver comfort while improving productivity case study When at work, tractors change direction and gear ratio regularly. Depending on the size of the field and the type of process, the gear is changed every few seconds. In order to improve driver comfort, a solution was required to allow automatic shifting and direction changes. Using proven core valve technology, imi precision engineering designed a modular system that electro-hydraulically controls the clutches and gearbox, allowing smooth gear and direction changes. Tractors equipped with this system can be controlled semi, or fully automatically depending on selected configuration. There are two main systems, which can be used or combined:

Powershuttle Changing drive direction “under the load” The smooth forward and reverse movement in all temperature conditions increases driver comfort and allows the driver to focus on other tasks such as loading. Customisable to specific requirements, the power shuttle consists of a hydraulic valve block, electronic clutch pedal position sensor and transmission control unit.

Powershift Changing gears “by the wire” The quick and easy gear shifting helps the driver to focus on their tasks. The shifting can be done automatically when powershift is combined with the powershuttle system, which brings the biggest advantage for customers. Customisable to specific requirements, the power shift consists of a hydraulic valve block, hydraulic actuators and transmission control unit.

Euro VI

Accurate

Low leakage

Air inlet throttle technologies for passenger cars are unable to meet the more severe operating conditions required by heavy duty engine applications. IMI Precision Engineering’s latest innovations in air inlet throttles are ‘smart’, meaning they incorporate local control and condition monitoring and communicate with the vehicle network via CAN. Using a proven DC brushless motor, directly coupled to a throttle body and air control flap, they have already appeared in ‘incentive engines’ within vehicles to be purchased by early adopters of the Euro VI standard. What the air throttle delivers –and how it works. Our inlet throttle optimises the pressure gradient driving EGR, allowing the best ‘in cylinder’ combustion conditions under a wide range of operating modes.

Fast & Reliable

The throttle assists in the cold start of emissions components, reducing the amount of oxygen available to them. By forcing immediate shutdown on key off, the throttle eliminates the ‘run-on’ which is commonly found in modern highcompression engines. To avoid shutting off the engine unintentionally, the throttle automatically returns to the open position under its own spring force in the event of any potential failure. In delivering these benefits, the inlet throttle meets a number of key design parameters including speed, resolution, repeatability, durability and sealing capacity. The performance level demanded of these systems requires the use of a compact and durable motor with a very high power density.

Visit www.imi-precision.com

Our technical innovation is clearly showcased in new air throttle technology which assists EGR by helping manage exhaust temperatures and with minimal impact on fuel consumption.

Innovating in inlets – new technologies to meet emissions legislation for heavy diesel engines case study

The future isâ&#x20AC;Ś natural gas (NG) technologies Over the next few years, natural gas will penetrate the diesel market. Our marketleading product ranges create an extensive range of high-performance components and complete system solutions to meet the specific requirements of the natural gas industry:

> Increasing energy efficiency > Improving the environment by simplifying the delivery of NG into vehicles and eliminating wastage > Improving the safety of NG delivery systems It is predicted that, by 2020, 20% of commercial vehicles manufactured will be powered by natural gas.

Visit www.imi-precision.com

Improved safety High pressure integrity

Solenoid valves for CNG

Cryogenic valves With its high energy density, liquefied natural gas (LNG) is fast becoming an alternative fuel of choice for medium and heavy duty vehicles as well as for high horsepower applications.

> Sizes from 3/8” to 2”

The performance and reliability of valves used in LNG applications is vital to the whole system. Since the temperature required to liquefy natural gas is -162°C, most valves need to meet cryogenic temperatures of -168°C to -198°C.

Gas conditioning modules

When compared to ball valves, our cryogenic solenoid valves help simplify your system design since they do not require instrument air. As a result, they reduce the amount of piping required as well as potential leak paths.

Systems Solutions

> Connections: NPT or BSP threads, ASME 16.5 150 lb/sq. flange, others on request > Can handle temperatures as low as -200°C > Rated for working pressures of up to 100 bar

> Filters > High/low pressure regulators

> Integrated fuel conditioning and supply module 13

Inlet Fuel conditioning

Visit www.imi-precision.com

Proportional wastegate control

Chassis/ CAB We offer both standard and customised pneumatic control solutions that comply with all regulatory requirements for use in primary and auxiliary applications, reducing leakage, improving reliability and lowering total cost of ownership. Precision engineered for functionality, durability and reliability, our compact designs occupy minimal space behind the dashboard, blending with the overall design of the dashboard and interior with customâ&#x20AC;&#x2018;designed graphics and lighting options available.

Cab control

Solenoid valve arrays Relay valves

Visit www.imi-precision.com

Seat controls

Manifolds

Fittings Fuel system components

Typical Applications include: > Seat height and lumbar control > Air horns > Pneumatic switches > Axle lift control > Solenoid valves and valve arrays > Manual pneumatic control valves > CAN connectable

Easily expandable

Lumbar / bolster control

High vibration

Life axle 15

CV45

Manual brake valves

50% faster response

NGSV

Visit www.imi-precision.com

Easy installation

Compact design

To these customers we provide 16

Visit www.imi-precision.com

Solutions for Mobile Pneumatics Our experience and expertise in the global Commercial Vehicle market has enabled us to work closely with a wide variety of customers who also need robust, reliable and proven solutions for pneumatic systems in their vehicles. We have been able to work with these customers to resolve challenging and critical applications across a range of industries, including:

Reliable, durable and proven products Companies who operate across global markets need systems which will work reliably through extremes of temperature and environment. Our products are specially designed to perform in these conditions, with a particular focus on climate, temperature, thermal shock, corrosion, vibration, and mechanical shock. We manufacture special filters and regulators to ensure optimum air quality to our range of valves, actuators and fittings.

Precise proportional control For applications which require precise variable control of pressure or flow in a system we have a complete range of industry-ready solutions which offer a range of low power and high accuracy options.

Smaller, lighter systems

> Bus & Coach manufacturers

With space and weight at a premium, we continue to develop products which maximise performance and resilience while minimising weight and space-claim. Our range of cartridge valves, valve arrays and fittings manifolds are specifically designed to meet these industry needs.

> Specialist Vehicle manufacturers (mining, agricultural)

Industry certifications

> Tanker & Trailer manufacturers > Body Builders

We continue to develop products to meet and exceed industry regulations where they apply â&#x20AC;&#x201C; our range of DOT FMVSS fittings for air brakes are used throughout the world. We also have secured DNVGL and BV marine certification for our proportional I/Pâ&#x20AC;&#x201C; meaning it can be used across the world.

Improved performance & efficiency

> Working with trailer manufacturers to develop pneumatic systems to extend the length of trailers which provide haulage companies with greater fleet flexibility. > Our proportional pressure control products have helped to extend the life of cleaning brushes and high pressure jets in a range of specialist municipal vehicles across the world.

Improved safety > IMI Precision Engineering provide bulk liquid trailer manufacturers with pneumatic systems to control safety handrails on top of tankers to ensure operator safety. > Pneumatic valves with various operators (plunger, roller lever) provide safe a reliable interlocking for tanker vents to help prevent damage to tanks. > Our range of in-cab pneumatic control switches and control cabinets enable operators to remain at a safe distance during tipper unloading. > We work with bus and coach manufacturers to supply a range of passenger door systems which include manual overrides and automatic reverse functions to ensure passenger safety.

Reduced emissions > Our marine-certified proportional pressure controllers have enabled shipbuilders and operators to reduce their emissions in line with new industry regulations. > Our valve arrays that are adopted by leading OEM Vehicle manufacturers due to their resilience and performance in the most demanding conditions can also be used by specialist vehicle manufacturers to add functions to the vehicle providing seamless integration with the base vehicle.

Improved comfort and ergonomics > We have developed a standard range of in-cab pneumatic seat-height, lumbar and suspension products to enhance operator comfort. > We have developed an industry-leading motorized climate control system for coaches which delivers precise and quiet operation for passengers, while also delivering operational efficiencies to coach operators.

Visit www.imi-precision.com

> Our proportional fluid flow control products have delivered benefits to the agricultural industry by enabling more precise and responsive dispense systems.

> We also manufacture electro-hydraulic control units to compensate for over-steering on municipal vehicles as well as pneumatic valves that can be used to pilot operate hydraulic systems particularly critical in environments that limit the use of electrical signals (underground mining, fuel tankers etc).

Trailers & Trailers IMI Precision Engineering has supplied push-in fittings for brake systems into the truck and trailer market for over 35 years. As haulage requirements have become more sophisticated we have developed our pneumatic capabilities to suit a wide range of systems and applications which are now found in todayâ&#x20AC;&#x2122;s modern tankers and trailers. Typical applications that we support today include:

Fittings & Accessories

CV45

Actuators, valves and auxiliary fittings

> DOT FMVSS/ DIN 74324 brake fittings > Fifth wheel applications > Control panels and cabinets > Pneumatic interlocks for safety critical applications > Extendable trailer applications > Safety handrail control > ATEX-rated process valves for tankers 18

> Air preparation equipment > Lubrication manifold > Pneumatic pilot system for hydraulics

Visit www.imi-precision.com

> Load cover/ automatic sheeting control > Tipper and tailgate control > Variable tank volume and evacuation control > Suction control

Metal body Super X valve

Control panels & cabinets Tank vent

Fuel filler caps & vents

Air preparation equipment

Push pull valve with status indicator ATEX-rated process valves

Specialist bulk and tipper trailers often need pneumatic control of tailgates and specialist systems.

Visit www.imi-precision.com

Our valves and actuators are used as pneumatic interlocks in a variety of applications - from car transporters to safety rails on bulk liquid tankers.

Push pull valve DOT FMVSS/ DIN 74324 air brake fittings

Tanker & Trailer Applications Bulk liquid tankers

ATEX certified valves

Bulk liquid tankers have multiple applications and requirements for both pneumatic and fluid control.

Operation of top and bottom filling valves also require pneumatic control, for which IMI Precision Engineering have a variety of applicable products. In many situations, these valves must conform to exacting ATEX safety standards.

Access to the top of the tanker is typically required for a variety of reasons: valve operation, measuring levels, checking vents and inspection. IMI Precision Engineering have a range of valves, cylinders and accessory components used in the raising and lowering of safety rails on top of bulk liquid tankers to ensure that the driver/operator is protected when working on top of the vehicle. Pneumatic interlocks are used to ensure vents are correctly opened prior to dispensing contents of the tanker. This prevents the tank from being damaged due to â&#x20AC;&#x153;suck inâ&#x20AC;? when not correctly vented. The process of controlling the filling and dispensing can also be automated using IMI Precision Pneumatic Control Boxes.

Visit www.imi-precision.com

Trailer length variation

DOT FMVSS Brake Fittings

Operators have developed their fleet to accommodate ever-changing demands on the loads and containers which they are hauling on our roads today. To ensure maximum efficiencies gained when operating a large fleet of trailers, extendable trailers have been developed to meet these demands.

IMI Precision Engineering have manufactured and supplied Push-to-connect air brake fittings to the commercial vehicle, trailer and OEM Tier 1 suppliers for over 35 years. Our customers around the world have achieved significant production efficiencies as these fittings save huge amount of time during assembly, both providing ease of access in tight spaces as no assembly tools are required and a substantial reduction in potential air leaks associated with traditional compression fitting systems. Our fittings are available in both inch and metric tube sizes with a broad range of different threads. All conform to industry requirements of SAE J1131, DOT FMVSS 106 for inch tube, TUV and DIN 74323 for metric.

The trailer length can be adjusted using a pneumatic system comprising cylinders and valves. Dependent on customer requirements, once the new trailer length has been achieved, it is locked into position either mechanically or pneumatically.

Designed for the passing of air in and out of the cab, the manifold creates a distribution point for multiple air connections and a single installation point for pressure switches. Integrated tube connections provide increased productivity and reliability, reducing leak paths, overall weight and footprint. each manifold is created specifically to the customerâ&#x20AC;&#x2122;s needs.

Visit www.imi-precision.com

Manifolds

Body Builders IMI Precision Engineering provide solutions for a wide variety of applications for industry OEMs and specialist body builders. We have a long history of supplying reliable, highperformance products designed to meet the challenging environments and problemsolving needs of the industry. Typical applications that we support today include: > Tailgate and tipper control > Side-wall locking > Pneumatic hand rail actuation > Pneumatic pilot system for hydraulics > Load cover/ automatic sheeting control > Pneumatic interlocks

Reliable actuators & valves

> Boom control/ counter balance > High pressure jetting control 22

> Wide sweep brush positioning > Proportional brush pressure control > Variable tank volume and evacuation control

Visit www.imi-precision.com

> Suction control > Spreading/ gritting control > Pneumatic trailer coupling

Actuators, valves and auxiliary fittings

Valve arrays and manifolds

Angle seat valve

Motorized variable cooling control

Proportional control Our special air suspension valve manifolds enable chassis height adjustment according to load and conditions for a variety of specialist bodybuilder applications, including ambulances.

In-cab tipper control

Control panels & cabinets

Municipal vehicles and fuel tankers both have requirements for pneumatic control panels and cabinets to ensure driver/ operator safety at all times.

Visit www.imi-precision.com

Other examples of specialist applications include pneumatic control of hydraulic systems as well as suction, boom counterbalance and tank filling/ emptying.

Body Builder Applications Sweeper brush positioning

Centralised pneumatic control cabinet

Municipal vehicles place extreme demands on the pneumatic components in their systems due to the harsh environments in which they operate.

Due to the tough operating conditions in and around wasteremoval vehicles it is beneficial to centralise the pneumatic control in the safe, clean and protected environment of a pneumatic control cabinet.

Proportional control is used to ensure the most consistent positioning of the pneumatic cylinders to achieve optimum cleaning performance. Other benefits of this proportional control are fast and accurate obstacle avoidance, needed when navigating a variety of road and pavement conditions.

The benefit of this solution is that it prevents potential damage from both the manual/mechanical operation of the system and the external environment.

Visit www.imi-precision.com

Tipper Control

Valve Islands

With the ever-increasing need to improve driver safety, tipper controls are now often located away from the areas of danger where the load is being emptied. This frequently results in pneumatic control being located in and around the cab environment, ensuring that the driver is out of harmâ&#x20AC;&#x2122;s way. IMI Precision Engineering have a varied ranges of valves that have been used in these applications for many years.

Valve islands to control multiple functions in complex systems often found in fire-engines, road sweepers and other municipal vehicles.

Visit www.imi-precision.com

Buses & Coaches Passenger comfort and safety on todayâ&#x20AC;&#x2122;s modern buses and coaches remains a high priority. IMI Precision Engineering supply a range of reliable and robust control valves for climate control and door-opening systems designed to operate in extreme temperatures.

PRA and IVAC cylinders for door actuation

Typical applications that we support today include: > Climate control > Door open/ close system with integrated anti entrapment > Emergency door control/air release > Disabled access systems > Articulated bus safety and damping systems > Battery cooling for hybrid buses > DOT FMVSS DIN 74324 brake fittings > Fuel filler caps (vented/ non-vented) 26

> Disabled access systems > Kneeling control valves

Visit www.imi-precision.com

Fittings & Accessories

Control valves

Glycol filters Climate control valves

Our high flow precision regulators control the response of the pantograph system according to height variations in electric overhead lines.

Special actuators are used to maintain constant tensioning on main and auxiliary fan belts, delivering efficiency and ease of servicing.

Emergency door valves

Door control systems

Visit www.imi-precision.com

IMI Precision Engineering have supplied door control systems for city buses and climate control systems for luxury coaches for many years.

Bus & Coach Applications Visit www.imi-precision.com

Climate control Our high performance range of 2 and 3-way motorized valves offer proportional and digital control of engine coolant (water glycol), enabling precise temperature control for passengers in buses and coaches. Features & Benefits include: > Digital control-damping closing reduces pressure shock. > Motorised proportional valve delivers constant flow and reduces pressure shock on the radiator, while power consumption closes off when a set point is reached. > Ceramic discs are resistant to dirt and variation of temperature, ensuring a more reliable performance. > Motor drive for flap control- EMV resistant and built to high IP classification (IP-6K9K), it includes a gold plated pin contact to deliver high torque with minimal back lash. > Coolant control valves for the temperature control of hybrid & full electric battery packs.

Climate control valves

Door opening systems

> A complete, customised system built from two components: door opening block and pneumatic cylinders. > Integrated safety functions, including a manual override option and an automatic reverse function for obstacle detection. > Emergency valves which remove air from system. In case of emergency allowing doors to be manually. From inside or outside of the vehicle.

Complete system

Anti-trap function

Customised manifold Reduced assembly time

Flexible door speed control

Visit www.imi-precision.com

Our pioneering pneumatic control door-opening system for buses and coaches offers:

Specialist vehicles

Agriculture IMI Precision Engineering works with specialist off-highway manufacturers to deliver improvements in efficiency, safety and performance for a range of agricultural vehicles. Typical applications that we support today include: > Emission control > Power Take Off Equipment > Tyre inflation systems > Proportional spray control > In-cab seat controls > In-cab climate control > Crop spraying > Harvesting > Processing equipment 30

Visit www.imi-precision.com

Urea tank heating valves

Solenoid valves for CNG

Proportional turbo wastegate control

In-cab controls

Climate control valves

Crop spraying

Our proportional pneumatic control systems enable accurate and efficient harvesting depending on the terrain and application.

Proportional dispense valves

Visit www.imi-precision.com

Multi function valve block

Efficient and accurate crop spraying is achieved with our precise proportional control valves which vary dispense according to the changing terrain.

Specialist vehicles

Mining & Construction IMI Precision Engineering works closely with mining and construction vehicle manufacturers to deliver outstanding performance in the most demanding of applications. Typical applications that we support today include: > Dust filtration systems > Drill flushing and cooling systems > In-cab seat controls > In-cab climate control > Brake interlocks > Emergency engine shut-off both incab and by remote control

Visit www.imi-precision.com

In-cab controls Climate control valves

We supply pneumatic systems for a variety of road construction vehicles including asphalt spreaders, road rollers and road marking equipment.

Dust filter valves

Visit www.imi-precision.com

IMI Precision valves help mining vehicle manufacturers keep their dust collectors operating at peak efficiency. Our valves also reduce energy consumption, are explosionproof up to hazardous area 1/21, and performing consistently across a temperature range from -40Â°C to 140Â°C.

Pneumatically actuated Collapsible Hand Rails case study Customer: Booth Engineering Location: Australia Key Benefits: Streamline design to offer a Safety Solution to CV tanker manufacturers

Requirement The “Booth Safety Rail System” is a collapsible hand rail that protects workers while they are working at heights on: > Road tankers and vehicles > Underground mining vehicles 34

> Near workshop pits > And in many other applications It has won WorkCover Victoria’s Award for Excellence in Innovation in Work Place Health and Safety.

Visit www.imi-precision.com

The hand rails are actuated with pneumatic cylinders. Booth Engineering sell most of their systems as kits to OEMs as well as trucking operators, repairers and installers. Many customers have their own preferences as to what features they require such as: > Interlocking the hand rails with the trailer’s parking brakes > Different size fittings for different customers > Different valve preferences such as pilot operated valves > Blocking fittings for cylinders > Flow control adjustment > Hold-back valves. All the different combinations and permutations can quickly get out of hand and be difficult to manage and keep in stock.

Solution

IMI Precision Engineering help Booth Engineering to streamline their design and manufacturing by: > Offering a range of kits. Each kit contains all the components required for each customers’ preferences. > Design advice. > Offering a brand that Booth Engineering’s customers already know and respect. > As part of their quality control, Booth Engineering used to leak tested every single cylinder. IMI Precision Engineering offered to perform this task inhouse prior to delivery, thus saving time and money. This allows Booth Engineering to have full confidence when it guarantees its hand rails.

Integrated solution prevents gearbox damage case study A division of Tata Motors, TML Drivelines, is currently the market leader in axles and transmissions for medium and heavy commercial vehicles in India. It sought to introduce a new nine-speed planetary range gearbox with high and low ranges. In order to prevent the destructive and potentially life-threatening effects of the abusive shift of such transmissions caused by drivers shifting to low range whilst driving at higher speed, a solution was needed to block the range shift when running above a set speed.

IMI Precision Engineering was asked to provide components for a solution designed in-house by Tata. However, by applying our commercial vehicle expertise we were able to propose an integrated solution combining solenoid valve, actuator, fitting and silencer in a compact single unit. Controlled by a new electronic control unit specifically designed by Tata to meet the application requirements, the IMI Precision Engineering solution offers Tata a robust, life-of-vehicle product, as well as reducing assembly time, sourcing and logistics costs.

Shift inhibit 35

Visit www.imi-precision.com

Hand Rail Control and Operation With over 40 years experience working directly with global commercial vehicle manufacturers, IMI Precision Engineering can supply pneumatic components required for the complete control and operation of collapsible Hand Rails for use on all variants of tanker vehicles and tanker trailers as well as other applications where a collapsible safety hand rail is required. Collapsible hand rails provide safety protection for operators whilst also allowing the vehicle to comply with both with maximum height restrictions and optimising tank capacity. > Many years of proven field experience > Protect workers working at heights > Design advice > Flexible range of kits > Easy to install robust solution > Heavy duty components used in the actuator construction > Leak tested cylinders > Fully local technical support

Find out more www.imi-precision.com

Engineering GREAT Solutions

1 Actuators

Industry standard or something different?

Compact or ultra compact?

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering actuator range. If you can’t see the option you require please contact us.

A C T U A TOR S

Single Acting Double Acting

Roundline Cylinders RM/28000/M ISO 6432 Ø 10 … 25 mm

RT/57100/M RT/57300/M Ø 10 … 40 mm

Page 39

RT/57200/M Ø 10 … 63 mm

Page 40

Compact Cylinders RA/191000/M, …/MX RA/193000/M, …/MX ISO 21287 Ø 20 … 63 mm

RA/192000/M RA/192000/MX ISO 21287 Ø 20 … 125 mm

Page 46

Page 48

Profile Cylinders 38

PRA/182000/M ISO, VDMA, NFE Ø 32 … 125 mm

RA/8000/M ISO, VDMA, NFE Ø 32 … 320 mm

Online at store.norgren.com

Page 56

Servo motor Servo motor XXXXXXX.9663.02400

Page 63

Page 59

Page 42

ISO ROUNDLINE CYLINDERS

RM/28000/M Single acting, ISO 6432 – Ø 10 … 25 mm

Technical Data

Materials

• Low friction ‘Z’ seals offer both high and low speed working and extremely long life

Medium: Compressed air, filtered, lubricated or non-lubricated

Barrel: Stainless steel (austenitic)

• Unit is fully non corrodible reducing the need for costly protection in more aggressive environments • Choice of three end cap styles, and other technical variants, allows a wider use of standard products

A C T U A TOR S

• Perfect for small to medium force applications

End covers: Clear anodised aluminium alloy

Operation: Single acting (sprung in), magnetic piston, buffer cushioning

Piston rod: Stainless steel (austenitic)

Operating pressure: 2 … 10 bar

Buffer: PUR

Operating temperature: -10°C … +80°C max.

Seals: NBR

Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions XC + # WF EW- d13

MR CD H9

# = Stroke

12 16

Ø CDH9

ØD

EW d13 KK

M12x1,25 12

16,5

7,9

M16x1,5

11,9

M16x1,5

11,9

M22x1,5

15,9

M22x1,5

15,9

M10x1,25 12

104

Dia. Ø

Stroke length Port size

Piston rod Ø

Reed switch with integral 5 m cable

Accessories

Models Model

Dia. AM Ø

Switch mounting <15 mm stroke

Switch mounting ≥15 mm stroke

Straight fitting

Elbow fitting

M/50/LSU/5V

QM/33/010/23

–

C02250405

C02470405

M/50/LSU/5V

–

QM/33/010/22

C02250405

C02470405

RM/28010/M/50

M/50/LSU/5V

–

QM/33/010/22

C02250405

C02470405

RM/28012/M/10

M/50/LSU/5V

QM/33/016/23

–

C02250405

C02470405

RM/28012/M/25

M/50/LSU/5V

–

QM/33/012/22

C02250405

C02470405

RM/28012/M/50

M/50/LSU/5V

–

QM/33/012/22

C02250405

C02470405

RM/28016/M/10

M/50/LSU/5V

QM/33/016/23

–

C02250405

C02470405

RM/28016/M/25

M/50/LSU/5V

–

QM/33/016/22

C02250405

C02470405

RM/28016/M/50

M/50/LSU/5V

–

QM/33/016/22

C02250405

C02470405

RM/28020/M/10

G1/8

M/50/LSU/5V

QM/33/020/23

–

C02250618

C02470618

RM/28020/M/25

G1/8

M/50/LSU/5V

–

QM/33/020/22

C02250618

C02470618

RM/28020/M/50

G1/8

M/50/LSU/5V

–

QM/33/020/22

C02250618

C02470618

RM/28025/M/10

G1/8

M/50/LSU/5V

QM/33/025/23

–

C02250618

C02470618

RM/28025/M/25

G1/8

M/50/LSU/5V

–

QM/33/025/22

C02250618

C02470618

RM/28025/M/50

G1/8

M/50/LSU/5V

–

QM/33/025/22

C02250618

C02470618

Service kits are not available for this range of cylinders. For information on alternative magnetic switches see pages 124 - 128.

Option selector Cylinder Ø (mm)

Other stroke lengths available up to 50 mm maximum, please contact us. For mountings, refer to double acting versions as shown on page 24. For alternative fitting types, shapes or sizes, refer to our fittings section.

RM/28˙˙/˙˙/˙˙

Substitute

Stroke (mm)

max. 50

Variants (magnetic piston)

Standard with integral eye mounting

Central rear port

Flat rear cover

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Substitute M

Online at store.norgren.com

RM/28010/M/10 RM/28010/M/25

ROUNDLINE CYLINDERS

RT/57100/M, RT/57300/M Single acting – Ø 10 … 40 mm

A C T U A TOR S

• Saves 20% space over the basic length of a corresponding ISO/VDMA cylinder • Low friction, long life seals • High strength, double crimped end cap design

Technical Data

Materials

Medium: Compressed air, filtered, lubricated or non-lubricated

Piston rod: Stainless steel (8 … 16 mm bore austenitic, 20 … 63 mm bore martensitic)

Operation: RT/57100/M: Single acting, Sprung in, with buffer cushion. RT/57300/M: Single acting, Sprung out, with buffer cushion.

• Standard magnetic piston for full control system versatility

End covers: Aluminium Barrel: Stainless steel (austenitic)

Operating pressure: 2 … 10 bar

Wiper: PUR

Ambient temperature: -5°C … +80°C max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions D

Seals and ‘O’-rings: NBR

XC + # + V WF

EW- 0,1

CD h9

# = Stroke

Dia. Ø

Ø CDh9

ØD

EW-O,1

V (#10 and #25)

V (#50)

M16 x 1,5

–

M16 x 1,5

–

M16 x 1,5

17,5

–

13,5

74,5

M16 x 1,5

–

15,5

75,5

M18 x 1,5

26,5

M10 x 1,25

–

16,5

78,5

M22 x 1,5

33,5

M10 x 1,25

M30 x 1,5

41,5

M12 x 1,25

Online at store.norgren.com

Accessories

Models Sprung in Model

Sprung out Model

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Switch mounting <15 mm stroke

Switch mounting ≥15 mm stroke

Banjo flow control

Straight fitting

Elbow fitting

RT/57110/M/10

RT/57310/M/10

M/50/LSU/5V

QM/33/010/23

–

C0L510405

C02250405

C02470405

RT/57110/M/25

RT/57310/M/25

M/50/LSU/5V

–

QM/33/010/22

C0L510405

C02250405

C02470405

RT/57110/M/50

RT/57310/M/50

M/50/LSU/5V

–

QM/33/010/22

C0L510405

C02250405

C02470405

RT/57112/M/10

RT/57312/M/10

M/50/LSU/5V

QM/33/016/23

–

C0L510405

C02250405

C02470405

RT/57112/M/25

RT/57312/M/25

M/50/LSU/5V

–

QM/33/012/22

C0L510405

C02250405

C02470405

RT/57112/M/50

RT/57312/M/50

M/50/LSU/5V

–

QM/33/012/22

C0L510405

C02250405

C02470405

RT/57116/M/10

RT/57316/M/10

M/50/LSU/5V

QM/33/016/23

–

C0L510405

C02250405

C02470405

RT/57116/M/25

RT/57316/M/25

M/50/LSU/5V

–

QM/33/016/22

C0L510405

C02250405

C02470405

RT/57116/M/50

RT/57316/M/50

M/50/LSU/5V

–

QM/33/016/22

C0L510405

C02250405

C02470405

RT/57120/M/10

RT/57320/M/10

Rc 1/8

M/50/LSU/5V

QM/33/020/23

–

C0SA00618

C01250618

C01470618

RT/57120/M/25

RT/57320/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0SA00618

C01250618

C01470618

RT/57120/M/50

RT/57320/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0SA00618

C01250618

C01470618

RT/57125/M/10

RT/57325/M/10

Rc 1/8

M/50/LSU/5V

QM/33/025/23

–

C0SA00618

C01250618

C01470618

RT/57125/M/25

RT/57325/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0SA00618

C01250618

C01470618

RT/57125/M/50

RT/57325/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0SA00618

C01250618

C01470618

RT/57132/M/25

RT/57332/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0SA00618

C01250618

C01470618

RT/57132/M/50

RT/57332/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0SA00618

C01250618

C01470618

RT/57140/M/25

RT/57340/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0SA00618

C01250618

C01470618

RT/57140/M/50

RT/57340/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0SA00618

C01250618

C01470618

Other bore sizes and stroke lengths available up to 150 mm maximum, please contact us. Service kits are not available for this range of cylinders. For information on alternative magnetic switches see pages 124 - 128. For mountings, refer to double acting versions as shown on page 29. For alternative fitting types, shapes or sizes, refer to our fittings section. Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ROUNDLINE CYLINDERS

RT/57100/M, RT/57300/M Single acting – Ø 10 … 40 mm

R˙/57˙˙˙/˙˙/˙˙˙ Port size

Cylinder Ø (mm)

50 max.

Cylinder variants

Magnetic piston

Magnetic piston, central rear port, flat end

Rc1/8

Cylinder Ø (mm)

16 20

Rc1/8 G1/8 Rc1/8

25 32 32

Substitute

Stroke (mm) Substitute M MC Substitute

G1/8

Rc1/8

Substitute

Sprung in

Sprung out

Spring postion

A C T U A TOR S

Option selector

Online at store.norgren.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ROUNDLINE CYLINDERS RT/57200/M Double acting – Ø 10 … 63 mm

A C T U A TOR S

• Saves 20% space over the basic length of a corresponding ISO/VDMA cylinder • Low friction, long life seals • High strength, double crimped end cap design

Technical Data

Materials

Medium: Compressed air, filtered, lubricated or non-lubricated

Piston rod: Stainless steel (8 … 16 mm bore austenitic, 20 … 63 mm bore martensitic)

Operation: Double acting, buffer cushioning

• Standard magnetic piston for full control system versatility

End covers: Aluminium

Mounting: Side port, integral eye mounting (Ø 10 … 40 mm), fixing holes in the end cover (Ø 50 and 63 mm)

Barrel: Stainless steel (austenitic) Wiper: PUR

Operating pressure: 1 … 10 bar

Seals and ‘O’-rings: NBR

Ambient temperature: -10°C … +80°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions Ø 10 … 40 mm

Ø 50 and 63 mm

XC + # BF

TG 2

# = Stroke

ø B - 0,1

CD h9

ø BA - 0,1

EW- 0,1

D XC + #

# = Stroke

XL + #

Ø 10 … 40 mm

Online at store.norgren.com

Dia. Ø

Ø CDh9

ØD

EW-O,1

M10 x 1

–

M10 x 1

–

M12 x 1,25 10

17,5

–

13,5

64,5

M16 x 1,5

–

15,5

75,5

M18 x 1,5

26,5

M10 x 1,25 –

16,5

78,5

M22 x 1,5

33,5

M10 x 1,25 12

M30 x 1,5

41,5

M12 x 1,25 14

Ø 50 and 63 mm Dia. Ø

Ø B/BA-0,1

ØD

52,5

M 12 x 1,25

M 10 x 1

28,5

65,5

M 16 x 1,5

M 12 x 1,5

35,5

Accessories

Models Model

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Switch mounting <15 mm stroke

Switch mounting ≥15 mm stroke

Banjo flow control

Straight fitting

Elbow fitting

RT/57210/M/10

M/50/LSU/5V

QM/33/010/23

–

C0K510405

C02250405

C02470405

RT/57210/M/25

M/50/LSU/5V

–

QM/33/010/22

C0K510405

C02250405

C02470405

RT/57210/M/40

M/50/LSU/5V

–

QM/33/010/22

C0K510405

C02250405

C02470405

RT/57210/M/50

M/50/LSU/5V

–

QM/33/010/22

C0K510405

C02250405

C02470405

RT/57210/M/80

M/50/LSU/5V

–

QM/33/010/22

C0K510405

C02250405

C02470405

RT/57210/M/100

100

M/50/LSU/5V

–

QM/33/010/22

C0K510405

C02250405

C02470405

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ROUNDLINE CYLINDERS

RT/57200/M Double acting – Ø 10 … 63 mm

Model

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Switch mounting <15 mm stroke

Switch mounting ≥15 mm stroke

Banjo flow control

Straight fitting

Elbow fitting

RT/57212/M/10

M/50/LSU/5V

QM/33/016/23

–

C0K510405

C02250405

C02470405

RT/57212/M/25

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/40

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/50

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/80

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/100

100

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/125

125

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57212/M/160

160

M/50/LSU/5V

–

QM/33/012/22

C0K510405

C02250405

C02470405

RT/57216/M/10

M/50/LSU/5V

QM/33/016/23

–

C0K510405

C02250405

C02470405

RT/57216/M/25

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/40

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/50

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/80

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/100

100

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/125

125

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57216/M/160

160

M/50/LSU/5V

–

QM/33/016/22

C0K510405

C02250405

C02470405

RT/57220/M/10

Rc 1/8

M/50/LSU/5V

QM/33/020/23

–

C0TA00618

C01250618

C01470618

RT/57220/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/40

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/80

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/100

100

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

125

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

160

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/200

200

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

RT/57220/M/250

250

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

320

Rc 1/8

M/50/LSU/5V

–

QM/33/020/22

C0TA00618

C01250618

C01470618

Rc 1/8

M/50/LSU/5V

QM/33/025/23

–

C0TA00618

C01250618

C01470618

RT/57225/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/40

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/80

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/100

100

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/125

125

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/160

160

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/200

200

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/250

250

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57225/M/320

320

Rc 1/8

M/50/LSU/5V

–

QM/33/025/22

C0TA00618

C01250618

C01470618

RT/57232/M/10

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/40

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/80

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/100

100

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/125

125

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/160

160

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/200

200

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/250

250

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

RT/57232/M/320

320

Rc 1/8

M/50/LSU/5V

–

QM/33/032/22

C0TA00618

C01250618

C01470618

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

RT/57220/M/320 RT/57225/M/10

RT/57220/M/125 RT/57220/M/160

A C T U A TOR S

Accessories

Models

ROUNDLINE CYLINDERS

RT/57200/M Double acting – Ø 10 … 63 mm

A C T U A TOR S

Accessories

Models Model

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Switch mounting <15 mm stroke

Switch mounting ≥15 mm stroke

Banjo flow control

Straight fitting

Elbow fitting

RT/57240/M/25

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/40

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/50

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/80

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/100

100

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/125

125

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/160

160

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/200

200

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/250

250

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57240/M/320

320

Rc 1/8

M/50/LSU/5V

–

QM/33/040/22

C0TA00618

C01250618

C01470618

RT/57250/M/25

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/40

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/50

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/80

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/100

100

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/125

125

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/160

160

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/200

200

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/250

250

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57250/M/320

320

Rc 1/4

M/50/LSU/5V

–

QM/33/050/22

C0TA00828

C01250828

C01470828

RT/57263/M/25

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/40

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/50

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/80

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/100

100

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/125

125

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

Online at store.norgren.com

RT/57263/M/160

160

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/200

200

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/250

250

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

RT/57263/M/320

320

Rc 1/4

M/50/LSU/5V

–

QM/33/063/22

C0TA00828

C01250828

C01470828

Other bore sizes and stroke lengths available up to 500 mm maximum, please contact us. Service kits are not available for this range of cylinders. For information on alternative magnetic switches see pages 124 -128.

For alternative fitting types, shapes or sizes, refer to our fittings section.

Option selector R˙/572˙˙/˙˙/˙˙˙ Port size

Cylinder Ø (mm)

Substitute T

Stroke (mm) 500 max.

Cylinder variants

Magnetic piston

Magnetic piston, central rear port, flat end

Rc1/8

Magnetic piston, side port, flat end

Rc1/8

Magnetic piston, double ended piston rod

G1/8

Rc1/8

G1/8

Rc1/8

G 1/4

Rc 1/4

G 1/4

Rc 1/4

Cylinder Ø (mm)

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Substitute M

Substitute

MOUNTINGS FOR ROUNDLINE CYLINDERS

RT/57100/M, RT/57200/M & RT/57300/M

Reed switch

A C T U A TOR S

Single and Double Acting Ø 10 … 40 mm Banjo L

Switch mounting

C F

N AK

UF N2

Double Acting Only Ø 50 … 63 mm

H L

Banjo

Reed switch

Online at store.norgren.com

Switch mounting

F AK UF C

Dia. Ø

QM/8010/38

M/P71273/2

QM/8010/25

–

QM/947

M/P71364

M/P1501/80

QM/8010/32

QM/8010/38

M/P71273/2

QM/8010/25

–

QM/947

M/P71364

M/P1501/80

QM/8010/32

QM/8012/38

M/P19369

QM/57016/25

–

QM/946

M/P1501/90

M/P1501/79

QM/8012/32

QM/8020/38

M/P19389

QM/57020/25

–

QM/8012/24

M/P13834

M/P1501/60

QM/8020/32

QM/8025/38

M/P40381

QM/57025/25

–

QM/57025/25

M/P13607

M/P1501/89

QM/8025/32

QM/8025/38

M/P19406

QM/57032/25

–

QM/8020/24

M/P13615

M/P1501/89

QM/8025/32

QM/8040/38

M/P71273/3

QM/57040/25

–

QM/57040/24

M/P29254

M/P1501/90

QM/8040/32

QM/8040/38

QM/57050/21

QM/57040/25

QM/55240/28

QM/57050/24*

–

M/P1501/90

QM/8040/32

QM/8050/38

QM/57063/21

QM/57063/25

QM/55250/28

QM/57063/24*

–

M/P1501/91

QM/8050/32

* Includes pivot nuts.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO COMPACT CYLINDERS

RA/191000/M, …/MX, RA/193000/M, …/MX Single acting, ISO 21287 – Ø 20 … 63 mm

A C T U A TOR S

• Conforms to ISO 21287 • Up to 30% shorter than full ISO/VDMA actuators • Uses standard ISO/VDMA mountings

Technical Data

Materials

Medium: Compressed air, filtered, lubricated or non-lubricated

Profile barrel: Anodized aluminium End covers: Pressure diecast aluminium

Operating pressure: 2 … 10 bar

Piston rod: Stainless steel

Ambient temperature: -5°C … +80°C Air supply must be dry enough to avoid ice formation at temperatures below +2°

Piston rod seals: PUR Piston seals: NBR O-rings: NBR

Accessories

Models Sprung in Female thread

Male thread

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Banjo flow control

Straight fitting

Elbow fitting

Service Kit

Online at store.norgren.com

RA/191020/MX/10

RA/191020/M/10

M/50/LSU/5V

C0L510405

C02250405

C02470405

QM/192020/00

RA/191025/MX/10

RA/191025/M/10

M/50/LSU/5V

C0L510405

C02250405

C02470405

QM/192025/00

RA/191032/MX/10

RA/191032/M/10

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192032/00

RA/191032/MX/25

RA/191032/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192032/00

RA/191040/MX/25

RA/191040/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192040/00

RA/191050/MX/25

RA/191050/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192050/00

RA/191063/MX/25

RA/191063/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192063/00

Sprung out Female thread

Male thread

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Banjo flow control

Straight fitting

Elbow fitting

Service Kit

RA/193020/MX/10

RA/193020/M/10

M/50/LSU/5V

C0L510405

C02250405

C02470405

QM/192020/00

RA/193025/MX/10

RA/193025/M/10

M/50/LSU/5V

C0L510405

C02250405

C02470405

QM/192025/00

RA/193032/MX/10

RA/193032/M/10

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192032/00

RA/193032/MX/25

RA/193032/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192032/00

RA/193040/MX/25

RA/193040/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192040/00

RA/193050/MX/25

RA/193050/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192050/00

RA/193063/MX/25

RA/193063/M/25

G1/8

M/50/LSU/5V

C0L510618

C02250618

C02470618

QM/192063/00

Other stroke lengths available up to 50 mm, please contact us. For mountings, refer to double acting versions as shown on page 46. For information on alternative magnetic switches see pages 124 - 128.

For alternative fitting types, shapes or sizes, refer to our fittings section.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO COMPACT CYLINDERS

RA/191000/M, …/MX, RA/193000/M, …/MX Single acting, ISO 21287 – Ø 20 … 63 mm

˙A/19˙˙˙˙/˙˙˙/˙˙˙ Piston rod materials

Substitute

Stroke (mm)

Stainless steel martensitic (1.4021)

max. 50

Stainless steel austenitic (1.4305)

Piston rod thread

Operation

Substitute

Sprung in Sprung out Cylinder Ø (mm)

Substitute X

Female

Variants (magnetic piston)

Standard

Substitute

A C T U A TOR S

Option selector

Non-rotating piston rod (internal)

N2 MU

020

Extended piston rod

025

032

RA/192***/MU*/***/***

040

050

063

Extension (mm)

Note: If option is not required, disregard option position within part number eg.RA/191032/M/25. For combinations of cylinder variants consult our technical service. This options selector explains only the cylinder variants. Additional variants/options can not be derived from.

Dimensions RA/191000/MX Sprung in with female piston rod thread

R RT

ø CD H 11 ø RR

Online at store.norgren.com

WH AF

Ø MM h 9

ZJ + # + V PL

RA/191000/M Sprung in with male piston rod threadd

# Stroke 1 M/50 – Switches can be mounted flush with the profile

RA/193000/MX Sprung out with female piston rod thread

RA/193000/M Sprung out with male piston rod thread

ZJ + 2 x # + V PL

WH + #

# Stroke

Model

Ø CD H11

RA/19*020/M*

Ø MM h9

M8 x 1,25

2,5

RA/19*025/M*

M8 x 1,25

2,5

RA/19*032/M*

14,5

G1/8

M10 x 1,25

2,5

RA/19*040/M*

14,5

54,5

G1/8

M10 x 1,25

2,5

RA/19*050/M*

G1/8

M10

M12 x 1,25

2,5

RA/19*063/M*

G1/8

M10

M12 x 1,25

2,5

Ø RR

kg at 0 mm

26 … 50 34

kg per 5 mm

0,17 kg

0,01 kg

0,20 kg

0,01 kg

4,3

V mm stroke 0 … 25 17

4,3

7,5

32,5

5,3

0,30 kg

0,02 kg

7,5

5,3

0,40 kg

0,02 kg

7,5

46,5

6,8

0,65 kg

0,03 kg

7,5

56,5

6,8

0,90 kg

0,03 kg

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO COMPACT CYLINDERS

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm

A C T U A TOR S

• Conforms to ISO 21287 • Up to 30% shorter than full ISO/VDMA actuators • Uses standard ISO/VDMA mountings

Technical Data

Materials

Medium: Compressed air, filtered, lubricated or non-lubricated

Profile barrel: Anodized aluminium

Operation: RA/192000/M Double acting, magnetic piston, male piston rod thread, buffer cushioning RA/192000/MX Double acting, magnetic piston, female piston rod thread, buffer cushioning Operating pressure: 1 … 10 bar

End covers: Pressure diecast aluminium Piston rod: Stainless steel Piston rod seals: PUR Piston seals: NBR O-rings: NBR

Ambient temperature: -5°C … +80°C max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Accessories

Models Female thread

Male thread

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Banjo flow control

Straight fitting

Elbow fitting

Service Kit

Online at store.norgren.com

RA/192020/MX/10

RA/192020/M/10

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192020/00

RA/192020/MX/15

RA/192020/M/15

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192020/00

RA/192020/MX/20

RA/192020/M/20

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192020/00

RA/192025/MX/10

RA/192025/M/10

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192025/00

RA/192025/MX/15

RA/192025/M/15

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192025/00

RA/192025/MX/20

RA/192025/M/20

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192025/00

RA/192025/MX/25

RA/192025/M/25

M/50/LSU/5V

C0K510405

C02250405

C02470405

QM/192025/00

RA/192032/MX/10

RA/192032/M/10

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/15

RA/192032/M/15

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/20

RA/192032/M/20

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/25

RA/192032/M/25

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/30

RA/192032/M/30

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/40

RA/192032/M/40

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/50

RA/192032/M/50

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/60

RA/192032/M/60

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/80

RA/192032/M/80

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192032/MX/100

RA/192032/M/100

100

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192032/00

RA/192040/MX/10

RA/192040/M/10

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/15

RA/192040/M/15

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/20

RA/192040/M/20

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/25

RA/192040/M/25

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/30

RA/192040/M/30

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/40

RA/192040/M/40

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/50

RA/192040/M/50

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/60

RA/192040/M/60

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/80

RA/192040/M/80

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

RA/192040/MX/100

RA/192040/M/100

100

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192040/00

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO COMPACT CYLINDERS

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm

Female threadl

Male thread

Dia. Ø

Stroke length

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Banjo flow control

Straight fitting

Elbow fitting

Service Kit

RA/192050/MX/10

RA/192050/M/10

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/15

RA/192050/M/15

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/20

RA/192050/M/20

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/25

RA/192050/M/25

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/30

RA/192050/M/30

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/40

RA/192050/M/40

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/50

RA/192050/M/50

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/60

RA/192050/M/60

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/80

RA/192050/M/80

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192050/MX/100

RA/192050/M/100

100

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192050/00

RA/192063/MX/10

RA/192063/M/10

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/15

RA/192063/M/15

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/20

RA/192063/M/20

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/25

RA/192063/M/25

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/30

RA/192063/M/30

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/40

RA/192063/M/40

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/M/50

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/M/60

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/80

RA/192063/M/80

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192063/MX/100

RA/192063/M/100

100

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QM/192063/00

RA/192080/MX/15

RA/192080/M/15

G1/8

M/50/LSU/5V

C0K510818

C02250818

C02470818

QM/192080/00

RA/192080/MX/20

RA/192080/M/20

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/M/25

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/M/30

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/MX/40

RA/192080/M/40

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/MX/50

RA/192080/M/50

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/MX/60

RA/192080/M/60

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/MX/80

RA/192080/M/80

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192080/MX/100

RA/192080/M/100

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192080/00

RA/192100/MX/15

RA/192100/M/15

100

G1/8

M/50/LSU/5V

C0K510818

C02250818

C02470818

QM/192100/00

RA/192100/MX/20

RA/192100/M/20

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/25

RA/192100/M/25

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/30

RA/192100/M/30

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/40

RA/192100/M/40

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/50

RA/192100/M/50

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/60

RA/192100/M/60

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/80

RA/192100/M/80

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192100/MX/100

RA/192100/M/100

100

G1/8

M/50/LSU/5V

C0K510818

C02470818

QM/192100/00

RA/192125/MX/15

RA/192125/M/15

125

G1/4

M/50/LSU/5V

C0K510818

C02250828

C02470828

QM/192125/00

RA/192125/MX/20

RA/192125/M/20

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/25

RA/192125/M/25

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/30

RA/192125/M/30

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/40

RA/192125/M/40

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/50

RA/192125/M/50

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/60

RA/192125/M/60

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/80

RA/192125/M/80

125

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

RA/192125/MX/100

RA/192125/M/100

125

100

G1/4

M/50/LSU/5V

C0K510818

C0K510828

C02470828

QM/192125/00

Other stroke lengths available up to 500 mm maximum, depending upon bore size, please contact us. For information on alternative magnetic switches see pages 124 - 128.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

For alternative fitting types, shapes or sizes, refer to our fittings section.

Online at store.norgren.com

RA/192080/MX/25 RA/192080/MX/30

RA/192063/MX/50 RA/192063/MX/60

A C T U A TOR S

Accessories

Models

ISO COMPACT CYLINDERS

A C T U A TOR S

Option selector

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm

˙˙A/192˙˙˙/˙˙˙/˙˙˙ Special variants High temperature version: 150°C max. Piston rod materials Stainless steel martensitic (1.4021) Stainless steel austenitic (1.4305) Cylinder Ø (mm)

Substitute

Piston rod thread

Substitute

Ø 20 and 25

Substitute

Ø 32 and 40

5 < 300

Ø 50 and 63

10 < 400

Ø 80 to 125

Substitute

5 < 200

15 < 500

Piston rod thread

Substitute

020

Female

025

Male

032

Variants (magnetic piston)

040

Standard

050

Double ended piston rod

063

Non-rotating piston rod (internal)

080

Guiding

100

Special wiper/seal

125

Locking unit

Note: If option is not required, disregard option position within part number eg.RA/192100/M/100. For combinations of cylinder variants consult our technical service. This options selector explains only the cylinder variants. Additional variants/options can not be derived from.

Substitute M

External guiding Extended piston rod RA/192***/MU*/***/***

Extension (mm)

Low friction

Tandem cylinder

Multi-positon cylinder RA/192***/SM*/***/***

Online at store.norgren.com For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

X None

Rear cylinder stroke Front cylinder stroke

ISO COMPACT CYLINDERS

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm

RA/192000/MX Standard cylinder With female piston rod thread

RA/192000/M Standard cylinder With male piston rod thread E

ZJ + # PL

R RT

ø CD H 11 ø RR

ø B d11

Ø MM h 9

A C T U A TOR S

Dimensions

# Stroke 1 M/50 switches can be mounted flush with the profile

Model

Ø B d11

Ø CD H11

RA/192020/.

–

E 37

Ø MM h9

M8x1,25

2,5

RA/192025/.

–

M8x1,25

2,5

RA/192032/.

–

14,5

G 1/8

M10x1,25

2,5

RA/192040/.

–

14,5

54,5

G 1/8

M10x1,25

2,5

RA/192050/.

–

G 1/8

M10

M12x1,25

2,5

RA/192063/.

–

G 1/8

M10

M12x1,25

2,5

RA/192080/.

–

15,5

G 1/8

M12

M16x1,5

100

–

21,5

116

G 1/8

M12

M16x1,5

125

20,5

142

G 1/4

M20

M27x2

–

0,12

–

0,01

R 22

Ø RR

4,3

SW 8

–

kg at 0 mm

kg per 5 mm

4,3

–

0,15

–

0,01

7,5

32,5

5,3

–

0,23

–

0,02

7,5

5,3

–

0,30

–

0,02

7,5

46,5

6,8

–

0,46

–

0,03

7,5

56,5

6,8

–

0,70

–

0,03

7,5

8,6

M10

–

1,23

–

0,04

100

10,5

8,6

M10

–

2,20

–

0,05

125

10,5

110

10,6

M12

–

3,60

–

0,07

RA/192000/N2X – Cylinder with non-rotating piston rod With female piston rod thread

RA/192000/N2 – Cylinder with non-rotating piston rod With male piston rod thread

ZJ + #

ZH + #

# Stroke

ZH + #

Model

kg at 0 mm

kg per 5 mm

RA/192020/N2.

0,12

0,01

RA/192025/N2.

0,15

0,01

RA/192032/N2.

0,23

0,02

RA/192040/N2.

0,30

0,02

RA/192050/N2.

0,46

0,03

RA/192063/N2.

0,70

0,03

RA/192080/N2.

1,23

0,04

RA/192100/N2.

100

2,20

0,05

Note: The basic length of the RA/192000/N2 version is slightly longer than the standard.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

40 50

RA/192100/. RA/192125/.

ISO COMPACT CYLINDERS

A C T U A TOR S

RA/192000/JMX Cylinder with double ended piston rod With female piston rod thread

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm RA/192000/JM Cylinder with double ended piston rod With male piston rod thread

ZJ + #

ZM + 2 x #

# Stroke

Model

kg at 0 mm

kg per 5 mm

RA/192020/JM.

0,15

0,01

RA/192025/JM.

0,18

0,01

RA/192032/JM.

0,28

0,02

RA/192040/JM.

0,35

0,02

RA/192050/JM.

0,52

0,03

RA/192063/JM.

0,76

0,03

RA/192080/JM.

1,30

0,04

RA/192100/JM.

100

2,30

0,05

RA/192125/JM.

125

107

3,75

0,07

RA/192000/N4 – Cylinder with guiding

Online at store.norgren.com

TDH8

# Stroke

ZJ2 + #

Model

Ø JB

Ø TDH8

… TG

ZJ2

kg at 0 mm

kg per 5 mm

RA/192020/N4

7,5

0,17

0,01

RA/192025/N4

7,5

15,6

0,23

0,01

RA/192032/N4

19,8

0,33

0,02

RA/192040/N4

23,3

0,45

0,02

RA/192050/N4

62,5

29,7

0,65

0,03

RA/192063/N4

35,4

0,95

0,03

RA/192080/N4

1,70

0,04

RA/192100/N4

100

112

56,5

M10

3,10

0,05

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO COMPACT CYLINDERS

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm

A C T U A TOR S

RA/192000/N6 – Cylinder with external guiding

AU BE

BS + #

AJ BN

BR + #

# Standard strokes 25, 50, 75 and 100 mm only

Model

at 0 mm

per 5 mm

RA/192025/N6

7,5

37,5

43,5

0,31 kg

0,09 kg

RA/192032/N6

7,5

40,5

48,5

43,5

0,44 kg

0,12 kg

RA/192000/TM – Tandem cylinder With male piston rod thread

ZJ + 2 x #

EE PL

PL1+ #

Model

PL1

kg at 0 mm

kg per 5 mm

RA/192020/TM.

25,5

0,21

0,01

RA/192025/TM.

26,5

0,26

0,01

RA/192032/TM.

G 1/8

7,5

0,39

0,02

RA/192040/TM.

G 1/8

7,5

0,51

0,02

RA/192050/TM.

G 1/8

7,5

0,78

0,03

RA/192063/TM.

G 1/8

7,5

1,21

0,03

RA/192080/TM.

G 1/8

7,5

104

2,11

0,04

RA/192100/TM.

100

G 1/8

10,5

45,5

122

3,68

0,05

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

# Stroke 1 Exhaust port Note: Do not cover this area! 2 Pressure »outstroke« 3 Pressure »instroke«

Online at store.norgren.com

RA/192000/TMX – Tandem cylinder With female piston rod thread

ISO COMPACT CYLINDERS

A C T U A TOR S

RA/192000/SMX – Multi position cylinder With female piston rod thread

RA/192000/M, …/MX Double acting, ISO 21287 – Ø 20 … 125 mm RA/192000/SM – Multi position cylinder With male piston rod thread

ZJ + #1 + #2

EE PL

PL1+ # 1

PL1+ #1

Model

PL1

kg at 0 mm

kg per 5 mm

RA/192020/SM.

25,5

0,21

0,01

RA/192025/SM.

26,5

0,26

0,01

RA/192032/SM.

G 1/8

7,5

0,39

0,02

RA/192040/SM.

G 1/8

7,5

0,51

0,02

RA/192050/SM.

G 1/8

7,5

0,78

0,03

RA/192063/SM.

G 1/8

7,5

1,21

0,03

RA/192080/SM.

G 1/8

7,5

104

2,11

0,04

RA/192100/SM.

100

G 1/8

10,5

45,5

122

3,68

0,05

RA/192000/L4X – Cylinder with locking unit female piston rod thread

1 Exhaust port

Note: Do not cover this area!

#1 Stroke front cylinder #2 Stroke rear cylinder Note: Stroke (#1) > stroke (#2) 2 Pressure »outstroke« rear cylinder 3 Pressure »instroke« 4 Pressure »outstroke« front cylinder

RA/192000/L4 – Cylinder with locking unit male piston rod thread

Ø AJ AB

ø B e 11

Online at store.norgren.com

ZH + #

VD AD AF WH

# Stroke

Model

Ø AJ

RA/192032/L4.

4,2

RA/192040/L4.

35,5

4,5

61,5

RA/192050/L4.

11,5

RA/192063/L4.

7,5

RA/192080/L4.

119

RA/192100/L4.

100

119

RA/192125/L4.

125

122

M10

140

Locking force

kg at 0 mm

kg per 5 mm

–

600 N

0,53

0,02

32,5

G 1/8

–

1000 N

0,70

0,02

G 1/8

46,5

–

1500 N

1,26

0,03

G 1/8

56,5

–

2200 N

1,90

0,03

100

G 1/8

M 10

–

5000 N

3,80

0,04

100

120

G 1/8

M 10

–

5000 N

5,90

0,05

125

140

G 1/8

110

M 12

–

7000 N

10,10

0,7

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MOUNTINGS FOR ISO COMPACT CYLINDERS

RA/191000/M, …/MX; RA/192000/M, …/MX; RA/193000/M, …/MX

A C T U A TOR S

Male and Female Piston Rod Thread Male Piston Rod Thread Only B

Banjo

R SW

UR D

US D2

FH UH

Assembly Kit AK S

UF F A

Reed switch

C G FH

For cylinders with male and female piston rod thread A

B, G

–

QA/192020/22

QM/192020/21

–

QM/8020/44

–

QA/192025/22

QM/192025/21

–

QM/8020/44

QM/8032/35

QA/8032/22

QA/192032/21

QA/8032/23

QA/8032/42

QA/8032/34

–

QM/8032/35

QA/8040/22

QA/192040/21

QA/8040/23

QA/8040/42

QA/8040/34

–

QM/8050/35

QA/8050/22

QA/192050/21

QA/8050/23

QA/8050/42

QA/8050/34

–

QM/8050/35

QA/8063/22

QA/192063/21

QA/8063/23

QA/8063/42

QA/8063/34

–

QM/8080/35

QA/8080/22

QA/192080/21

QA/8080/23

QA/8080/42

QA/8080/34

–

100

QM/8080/35

QA/8100/22

QA/192100/21

QA/8100/23

QA/8100/42

QA/8100/34

–

125

QM/8125/35

QM/8125/22

QM/8125/21

QM/8125/23

QA/8125/42

QA/8125/34

–

Dia. Ø

Assembly kit*

QM/192020/27

–

QA/192020/55

QM/192025/27

–

QA/192025/55

QA/8032/27

QA/8032/41

M/P19493

PQA/182032/40

QA/8032/33

M/P40310

QA/192032/55

QA/8040/27

QA/8040/41

M/P19494

PQA/182040/40

QA/8040/33

M/P40311

QA/192040/55

QA/8050/27

QA/8040/41

M/P19495

PQA/182050/40

QA/8050/33

M/P40312

QA/192050/55

QA/8063/27

QA/8063/41

M/P19496

PQA/182063/40

QA/8063/33

M/P40313

QA/192063/55

QA/8080/27

QA/8063/41

M/P19497

PQA/182080/40

QA/8080/33

M/P40314

QA/192080/55

100

QA/8100/27

QA/8100/41

M/P19498

PQA/182100/40

QA/8100/33

M/P40315

QA/192100/55

125

QM/8125/27

QA/8100/41

M/P19499

PQA/182125/40

QM/8125/33

M/P71355

QA/192125/55

* For connecting 2 similar bore actuators together via the rear end cap.

For cylinders with male piston rod thread Dia. Ø

QM/8020/38

QM/8020/25

M/P1501/60

QM/8020/32

QM/8020/38

QM/8020/25

M/P1501/60

QM/8020/32

QM/8025/38

QM/8025/25

M/P1501/89

QM/8025/32

QM/8025/38

QM/8025/25

M/P1501/89

QM/8025/32

QM/8040/38

QM/8040/25

M/P1501/90

QM/8040/32

QM/8040/38

QM/8040/25

M/P1501/90

QM/8040/32

QM/8050/38

QM/8050/25

M/P1501/91

QM/8050/32

100

QM/8050/38

QM/8050/25

M/P1501/91

QM/8050/32

125

QM/8125/38

QM/8125/25

M/P1501/105

QM/8125/32

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Dia. Ø

ISO/VDMA PROFILE CYLINDERS PRA/182000/M Double acting – Ø 32 … 125 mm

A C T U A TOR S

• Conforms to ISO 15552, ISO 6431, VDMA 24562 and NFE 49-003-1

Technical Data

Materials

• Flush mounted switch system

Medium: Compressed air, filtered, lubricated or non-lubricated

Profile barrel: Anodised aluminium

• Low friction levels and long life expectancy • More stocked bore/stroke combinations than many competitors • Large range of standard mountings

End covers: Pressure diecast aluminium

Operation: Double acting, magnetic piston, adjustable cushioning

Piston rod: Stainless steel (martensitic)

Operating pressure: 1 … 16 bar

Piston rod seals: PUR

Ambient temperature: -20°C … +80°C max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Piston seals: PUR O-rings: NBR

Dimensions WH

L8 + #

ø BA e 11 BG

# Stroke

ø B e 11

Dia. Ø

Ø Be11/BAe11

M10x1,25

32,5

M12x1,25

105

3,5

M16x1,5

106

46,5

3,5

M16x1,5

121

56,5

M20x1,5

128

M 10 4

100

115

M20x1,5

138

M 10 4

125

140

M27x2

160

110

M 12 6

Online at store.norgren.com

Accessories

Models Model

Dia. Ø

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Banjo flow control

Straight fitting

Elbow fitting

Service kit

PRA/182032/M/***

G1/8

M/50/LSU/5V

C0K510618

C02250618

C02470618

QA/8032/00

PRA/182040/M/***

G1/4

M/50/LSU/5V

C0K510628

C02250628

C02470628

QA/8040/00

PRA/182050/M/***

G1/4

M/50/LSU/5V

C0K510828

C02250828

C02470828

QA/8050/00

PRA/182063/M/***

G3/8

M/50/LSU/5V

C0K510838

C02250838

C02470838

QA/8063/00

PRA/182080/M/***

G3/8

M/50/LSU/5V

C0K511038

C02251038

C02471038

QA/8080/00

PRA/182100/M/***

100

G1/2

M/50/LSU/5V

C0K511248

C02251248

C02471248

QA/8100/00

PRA/182125/M/***

125

G1/2

M/50/LSU/5V

C0K511248

C02251248

C02471248

QA/8125/00

*** Insert stroke length in mm. Other stroke lengths available up to 3,000 mm maximum, please contact us. For information on additional magnetic switches see pages 124 - 128.

For alternative fitting types, shapes or sizes, refer to our fittings section.

Standard strokes Cylinder

Stroke length (mm)

Ø (mm)

100

125

160

200

250

320

400

500

•

100

•

125

•

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO/VDMA PROFILE CYLINDERS

PRA/182000/M Double acting – Ø 32 … 125 mm

Cyl. Ø

Guide blocks - plain bearings

Guide blocks - roller bearings

Guide blocks - plain bearings, long coupling

Guide blocks - plain bearings, short coupling

QA/8032/51/*

QA/8032/61/*

QA/8032/81/*

QA/8032/85/*

QA/8040/51/*

QA/8040/61/*

QA/8040/81/*

QA/8040/85/*

QA/8050/51/*

QA/8050/61/*

QA/8050/81/*

QA/8050/85/*

QA/8063/51/*

QA/8063/61/*

QA/8063/81/*

QA/8063/85/*

QA/8080/51/*

QA/8080/61/*

QA/8080/81/*

QA/8080/85/*

100

QA/8100/51/*

QA/8100/61/*

QA/8100/81/*

QA/8100/85/*

A C T U A TOR S

Guide blocks

* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 & 500 mm, use nearest standard stroke.

Options • Without cushions

• High temperature seals

• Double ended piston rod

• Low temperature seals

• Four position version

• Hydraulic version

• Non rotating piston rod

• Hard Chrome Piston Rod

• Locking unit

• Stainless steel piston rod - austenitic

• Extended Piston rod

• Non magnetic version

• Guide Blocks

• Special wiper seal

• Heavy Duty Guide Blocks

• Low friction

• Atex versions: II 2 GD C T4 120°C / II 3 GD C T4 120°C (Piston rod bellow)

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

• Piston rod bellow

• Options

MOUNTINGS FOR ISO/VDMA PROFILE CYLINDERS PRA/182000/M

A C T U A TOR S

Single and Double Acting Double Acting only

B Banjo C

SW UR

Guide block

D D2

S UH

UH A AK

S UF F C SS

G A FH

Online at store.norgren.com

Dia. Ø

B, G

QM/8032/35

QM/8025/38

QA/8032/22

QA/8032/21

QA/8032/23

QA/8032/42

QM/8025/25

QA/8032/34

QA/8032/27

QM/8032/35

QM/8040/38

QA/8040/22

QA/8040/21

QA/8040/23

QA/8040/42

QM/8040/25

QA/8040/34

QA/8040/27

QM/8050/35

QM/8050/38

QA/8050/22

QA/8050/21

QA/8050/23

QA/8050/42

QM/8050/25

QA/8050/34

QA/8050/27

QM/8050/35

QM/8050/38

QA/8063/22

QA/8063/21

QA/8063/23

QA/8063/42

QM/8050/25

QA/8063/34

QA/8063/27

QM/8080/35

QM/8080/38

QA/8080/22

QA/8080/21

QA/8080/23

QA/8080/42

QM/8080/25

QA/8080/34

QA/8080/27

100

QM/8080/35

QM/8080/38

QA/8100/22

QA/8100/21

QA/8100/23

QA/8100/42

QM/8080/25

QA/8100/34

QA/8100/27

125

QM/8125/35

QM/8125/38

QM/8125/22

QM/8125/21

QM/8125/23

QA/8125/42

QM/8125/25

QA/8125/34

QM/8125/27

Dia. Ø

QA/8032/41

M/P19931

M/P19493

QM/8025/32

PQA/182032/40

QA/8032/33

M/P40310

QA/8040/41

M/P19932

M/P19494

QM/8040/32

PQA/182040/40

QA/8040/33

M/P40311

QA/8040/41

M/P19933

M/P19495

QM/8050/32

PQA/182050/40

QA/8050/33

M/P40312

QA/8063/41

M/P19934

M/P19496

QM/8050/32

PQA/182063/40

QA/8063/33

M/P40313

QA/8063/41

M/P19935

M/P19497

QM/8080/32

PQA/182080/40

QA/8080/33

M/P40314

100

QA/8100/41

M/P19936

M/P19498

QM/8080/32

PQA/182100/40

QA/8100/33

M/P40315

125

QA/8100/41

M/P19937

M/P19499

QM/8125/32

PQA/182125/40

QM/8125/33

M/P71355

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ISO/VDMA CYLINDERS

RA/8000/M Double acting – Ø 32 … 320 mm

Technical Data

Materials

• Capable of working up to 16 bar of pressure as standard

Medium: Compressed air, filtered, lubricated or non-lubricated

Barrel: Anodised aluminium

• Wide range of standard bore and stroke combinations available • Switches mounted via bracket

A C T U A TOR S

• Conforms to ISO 15552, ISO 6431, VDMA 24562 and NFE 49-003-1

End covers: Pressure diecast aluminium (Ø 200 … 320 mm gravity cast aluminium)

Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure: Ø 32 … 200 mm: 1 … 16 bar Ø 250 & 320 mm: 1 … 10 bar

Piston rod seals: PUR (Ø 125 … 320 mm NBR) Piston seals: PUR (Ø 125 … 320 mm NBR)

Ambient temperature: -20°C … +80°C max.

O-rings: NBR

Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions WH

L8 + #

ø BA e 11 BG

# Stroke

ø B e 11

Ø BA/Be11

M10x1,25

32,5

M12x1,25

105

3,5

M16x1,5

106

46,5

3,5

17,5

M16x1,5

121

56,5

21,5

M20x1,5

128

M 10

100

21,5

115

M20x1,5

138

M 10

125

140

M27x2

160

110

M12

160

28,5

183,5

M36x2

180

140

M16

200

28,5

224

M36x2

180

175

M16

250

280

M42x2

200

220

M20

105

320

110

350

M48x2

220

270

M24

120

Accessories

Models Sprung in Model

Dia. Ø

Port size

Piston rod Ø

Reed switch with integral 5 m cable

Switch mounting

Banjo flow control

Straight fitting

Elbow fitting

Service kit

RA/8032/M/***

G1/8

M/50/LSU/5V

QM/27/2/1

C0K510618

C02250618

C02470618

QA/8032/00

RA/8040/M/***

G1/4

M/50/LSU/5V

QM/27/2/1

C0K510628

C02250628

C02470628

QA/8040/00

RA/8050/M/***

G1/4

M/50/LSU/5V

QM/27/2/1

C0K510828

C02250828

C02470828

QA/8050/00

RA/8063/M/***

G3/8

M/50/LSU/5V

QM/27/2/1

C0K510838

C02250838

C02470838

QA/8063/00

RA/8080/M/***

G3/8

M/50/LSU/5V

QM/27/2/1

C0K511038

C02251038

C02471038

QA/8080/00

RA/8100/M/***

100

G1/2

M/50/LSU/5V

QM/27/2/1

C0K511248

C02251248

C02471248

QA/8100/00

RA/8125/M/***

125

G1/2

M/50/LSU/5V

QM/27/2/1

C0K511248

C02251248

C02471248

QA/8125/00

RA/8160/M/***

160

G3/4

M/50/LSU/5V

QM/27/2/1

M/840 (Inline)

–

QA/8160/00

RA/8200/M/***

200

G3/4

M/50/LSU/5V

QM/27/2/1

M/840 (Inline)

–

QA/8200/00

RA/8250/M/***

250

QM/32/5

QM/31/250/22

M/855 (Inline)

–

QA/8250/00

RA/8320/M/***

320

QM/32/5

QM/31/320/22

M/855 (Inline)

–

QA/8320/00

*** Insert stroke length in mm. Other stroke lengths available up to 3,000 mm maximum, please contact us. For information on alternative magnetic switches see pages 124 - 128.

For alternative fitting types, shapes or sizes, refer to our fittings section.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Dia. Ø

ISO/VDMA CYLINDERS

RA/8000/M Double acting – Ø 32 … 320 mm

A C T U A TOR S

Standard strokes Cylinder

Stroke length (mm)

Ø (mm)

100

125

160

200

250

320

400

500

•

100

•

125

•

160

•

200

•

250

•

320

•

Options

• High temperature seals

• Double ended piston rod

• Hydraulic version

• Four position version

• Hard Chrome Piston Rod

• Non rotating piston rod

• Stainless steel piston rod - austenitic

• Locking unit

• Non magnetic version

• Extended Piston rod

• Special wiper seal

• Guide Blocks

• Low friction

• Heavy Duty Guide Blocks

• Piston rod bellow

• Atex versions: II 2 GD C T4 120°C / II 3 GD C T4 120°C (Piston rod bellow)

• Without cushions

Online at store.norgren.com For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MOUNTINGS FOR ISO/VDMA TIE ROD CYLINDERS

RA/8000/M Single and double acting

A C T U A TOR S

Single Acting Double Acting

Cyl. A Ø

B, G

110

Online at store.norgren.com

713 814 915 1016

5 637712 6 748813 7 859914 8 96 910 168 179 1810 19 11 20 12 1015 20 11 1 22 1 2 33 2 3 44 3 4155 4 526611 10 7 10

1722 1823 1924 2025

111213 121314 1314 1415 15 16 17 18 19 2016 2117 2218 2319 2420 2518 2619 2720 28 20 29 21 11 1112 12 13 14 15 16 17 18 19 20 2911 15 16 17 18 19 20 11 12 13 14 15 16 17 20

26 32 27 33 28 34 29 35

202122 212223 2223 2324 24 25 26 27 28 20 2021 21 22 23 24 25 26 27 28 29 3025 24 25 26 27 28 29 3126 3227 3328 3429 3527 3628 3729 38 30 39 31 20 21 22 23 24 25 26 29 3920

313233 3233 3334 3435 3536 3637 3738 3839 30 30 31303132 32 33 34 35 36 37 38 39 30 31 34 35 36 37 38 39 30 31 32 33 34 35 36 3937

QM/8032/35

QM/8025/38

QA/8032/22

QA/8032/21

QA/8032/23

QA/8032/42

QM/8025/25

QA/8032/34

QA/8032/28

QM/8032/35

QM/8040/38

QA/8040/22

QA/8040/21

QA/8040/23

QA/8040/42

QM/8040/25

QA/8040/34

QA/8040/28

QM/8050/35

QM/8050/38

QA/8050/22

QA/8050/21

QA/8050/23

QA/8050/42

QM/8050/25

QA/8050/34

QA/8050/28

QM/8050/35

QM/8050/38

QA/8063/22

QA/8063/21

QA/8063/23

QA/8063/42

QM/8050/25

QA/8063/34

QA/8063/28

QM/8080/35

QM/8080/38

QA/8080/22

QA/8080/21

QA/8080/23

QA/8080/42

QM/8080/25

QA/8080/34

QA/8080/28

100 QM/8080/35

QM/8080/38

QA/8100/22

QA/8100/21

QA/8100/23

QA/8100/42

QM/8080/25

QA/8100/34

QA/8100/28

125 QM/8125/35

QM/8125/38

QM/8125/22

QM/8125/21

QM/8125/23

QA/8125/42

QM/8125/25

QA/8125/34

QM/8125/28

160 QM/8160/35

QM/8160/38

QM/8160/22

QM/8160/21

QM/8160/23

QA/8160/42

QM/8160/25

–

QM/8160/28

200 QM/8160/35

QM/8160/38

QM/8200/22

QM/8200/21

QM/8200/23

QA/8200/42

QM/8160/25

–

QM/8200/28

250 QM/8250/35

–

QM/8250/22

QM/8250/21

QM/8250/23

–

QM/8250/25

–

QM/8250/28

320 QM/8320/35

–

QM/8320/22

QM/8320/21

QM/8320/23

–

QM/8320/25

–

QM/8320/28

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MOUNTINGS FOR ISO/VDMA TIE ROD CYLINDERS

RA/8000/M Single and double acting

A C T U A TOR S

Cyl. Ø

2 1 3 2 4 3 514 625 736 847 958 1069

710

9 110 2

101020 11 12 13 14 15 16 143816 154917 16510 176 19 187 20 198 17 209 1810 1191 112202 123 3 134 4 145 5 156 6 167 7 178 8 189 9 19 18 41211 513121614132715

311

20 21 22 23 24 25 28 29 23 24 25 26 27 28 29 11 12 13 14 15 1628 1729 18 26 19 272011 12 131322 141423 151524 161625 171726 181827 191928 202029 20 14 212015 2221 2322 24 25 26 27 1120 1221 13 16 17 18 19 20

21 222232 232333 242434 252535 262636 272737 282838 292939 2030 2131 30 30 23 22 25 26 27 28 29 31 32 33 34 35 38 39 3322 3423 3524 362538 372639 3827 36 3928 372920 313024 323120 333221 34 35 36 37

QA/8032/27

QA/8040/27

34 30 35 31 36 32 37 33 38 34 39 35

QA/8032/41

M/P19931

M/P19493

QM/8025/32

QA/8040/41

M/P19932

M/P19494

QM/8040/32

393030 3131 3232 3333 3434 3535 3636 3737 3838 3939 PQA/182032/40

QA/8032/33

M/P40310

PQA/182040/40

QA/8040/33

M/P40311 M/P40312

QA/8050/27

QA/8040/41

M/P19933

M/P19495

QM/8050/32

PQA/182050/40

QA/8050/33

QA/8063/27

QA/8063/41

M/P19934

M/P19496

QM/8050/32

PQA/182063/40

QA/8063/33

M/P40313

QA/8080/27

QA/8063/41

M/P19935

M/P19497

QM/8080/32

PQA/182080/40

QA/8080/33

M/P40314

100

QA/8100/27

QA/8100/41

M/P19936

M/P19498

QM/8080/32

PQA/182100/40

QA/8100/33

M/P40315

125

QM/8125/27

QA/8100/41

M/P19937

M/P19499

QM/8125/32

PQA/182125/40

QM/8125/33

M/P71355

160

QM/8160/27

QA/8160/41

M/P19938

M/P19679

QM/8160/32

QM/8160/40

QM/8160/33

M/P71356

200

QM/8200/27

QA/8160/41

M/P19939

M/P19683

QM/8160/32

QM/8200/40

QM/8200/33

M/P71357

250

–

M/P19446

QM/8250/32

–

QM/8250/33

–

320

–

M/P19447

QM/8320/32

–

QM/8320/33

–

Guide blocks 61

Cyl.83 Ø

Guide bearings 94 blocks 105 - plain61 72

Guide 94 blocks 105 - roller61bearings 72

Guide 94 blocks 105 - plain6 bearings, long coupling

Guide 9 blocks 10 - plain bearings, short coupling

16 11 17 12 18 13 19 14 20 15

25 20 26 21 27 22 28 23 29 24

30 36 35 31 37 32 38 33 39 34

16 11 17 12 18 13 19 14 20 15

30 36 35 31 37 32 38 33 39 34

Online at store.norgren.com

QA/8032/51/*

QA/8032/61/*

QA/8032/81/*

QA/8032/85/*

QA/8040/51/*

QA/8040/61/*

QA/8040/81/*

QA/8040/85/*

QA/8050/51/*

QA/8050/61/*

QA/8050/81/*

QA/8050/85/*

QA/8063/51/*

QA/8063/61/*

QA/8063/81/*

QA/8063/85/*

QA/8080/51/*

QA/8080/61/*

QA/8080/81/*

QA/8080/85/*

100

QA/8100/51/*

QA/8100/61/*

QA/8100/81/*

QA/8100/85/*

* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.

4 5 6 7 8 9 10 Accessories - Magnetically operated switches

Cyl. Ø

Switch mounting brackets for M/50

Switch mounting brackets for TQM/31, QM/32, QM/132

Switch mounting brackets for QM/140

QM/27/2/1

QM/31/032/22

QM/140/010/22

QM/27/2/1

QM/31/032/22

QM/1w40/010/22

QM/27/2/1

QM/31/032/22

QM/140/010/22

QM/27/2/1

QM/31/032/22

QM/140/010/22

QM/27/2/1

QM/31/080/22

QM/140/010/22

100

QM/27/2/1

QM/31/080/22

QM/140/010/22

125

QM/27/2/1

QM/31/080/22

–

160

QM/27/2/1

QM/31/160/22

–

200

QM/27/2/1

QM/31/160/22

–

250

–

QM/31/250/22

–

320

–

QM/31/320/22

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

SERVO MOTOR

XXXXXXX.9663.02400

• Geared d.c. actuator motor with feedback potentiometer for swivel motion of up to 180° for the adjustment of Buschjost heating valves and ventilation flaps in commercial vehicles.

Technical Data

Materials

Gearing: Irreversible

Housing: Polybutylenterephthalat (PBT)

A C T U A TOR S

• Type approval EMV E1 10R-036112

Mounting position: Actuator vertical on top ±90° Other mounting positions by appointment Direction of rotation: Right/left

Kraft

fahrt DE-24

Rotation angle drive shaft: 183° ±3°

-Bun

932

Flensb

desam

urg

MITTE ausges

ILUNG

tellt von

Kraftfa

hrt-Bu über die Erw ndesa eines eite mt Regel Typs ein rung der es ung Nr. 10 elektrischGenehmig en/ele ung ktronis chen

Rated speed: 5,5 ± 2 min -1

COMM issued

UNICA

by:

TION

Bauteil

es nac

h der

Kraftfa

hrt

concer -Bund nin esamt of a typ g app Regul e of ele roval ext end ctri ation No. 10 cal/electro ed nic sub -as

Numm Approv er der Ge nehmig al No .: ung

Rated torque: 0,4 Nm

Ausfüh Versio rung(en): 9663.0 n(s): 9672.0 2400 9671.0 2400 9663.0 2400 1200 Hande Gener lsbezeich Stellm al comme nung(en): rcial otor descrip tion

Start-up torque: 100 ... 350 Ncm

: 036

112

Fabrikm Make arke (Ha Busch(trade nam ndelsnam Spher jost Gm e of ma e des He nufact os Gm bH rsteller urer): s): bH Typ: Type: 9663

sembly

with

regard

Erweite Extens rung Nr. ion No : 02 .:

(s):

Load drive shaft, static: Holding torque max. 15 Nm at room temperature axial force 30 N radial force 50 N Limit stops: Fitted to housing, unsprung Mass: 0,125 kg

Installation: Ø bolthead ≥8,5 mm ≤11 mm clamping force 1 kN / bolt Temperature range: -40ºC ... +110°C

Plug connector: See connection table

Short-circuit current: ≤250 mA

Type of protection: IP 6K9K with suitable power outlet (see connection table)

Control pulse length: ≥65 ms

Reverse polarity protection: All connections on vehicle protected against reverse polarity (max. 28 V, max. 60 sec) to ground and positive operating voltage except for slider connection.

Busy period: ≤30 s

Rated voltage: 24 V d.c.

Overall busy period: ≤200 h, 144.000 limit stops, 90° swivel angle, activation 7.5 sec, pause 30 sec

Operating voltage: 18 ... 32 V d.c. Rated current: ≤100 mA

Electrostatic discharge (ESD): No interferrence (passive components only) Interference immunity: intensity level 3, for ECE-scheme No. 10 Emitted interference: According ECE-Scheme No. 10

No-load current: ≤50 mA

Diagram 250

9 n

U p= 26V

P2 [W]

200

0,335

0,3

I [mA]

5 4

100

n [min-1]

6 150

0,2

3 2

0,1

1 0

0,2

0,4

0,6

0,8

1,2

1,4

1,6

M [Nm]

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Electrical features

SERVO MOTOR

XXXXXXX.9663.02400

A C T U A TOR S

Classification ISO 16750:2003 Z NA I E ZA IP6K9K ISO 16750-3 mech. strain table 22

ISO 16750-5 chem. strain motor housing + cavity protection

ISO 16750-4 table 1 operating temp. -40 ... +110°C

ISO 16750-4 table 6 climatic strain

ISO 16750-2 18 ... 32 V DC

Feedback potentiometer Supply voltage: UR = 5 ± 0,5 V d.c.

Linearity: 3% (absolute)

Voltage divider ratio: See drawing coupling connection

Power rating P40: 0,25 W

Noise: e imax / Us ‹1% according to VRCI 100-A with load resistor 100 kΩ

Lifespan: 4 x 106 actuations 10° by -40ºC ... +110°C

Resistance: 4,70 kΩ ±20%

Noise emission

Lifespan

Measuring reference DIN EN 60534-8: Idle running 47 dB(A) Last 50 dB(A)

4 x 106 actuations 10°C by 90°C ambient temperature

Online at store.norgren.com

Connection table Connector IP-class

Temperature Range

Connector Housing

Wire Size (mm2)

Insulation diameter (mm)

Contact Finish

Contacts

Single Wire Sealing

Seal for unloaded cavities

IP 54

-40ºC ... +80°C

Bosch 1 928 403 095 0,5 ... 0,75

1,6 ... 1,9

gold plated

Tyco 965 906-5

Tyco 967 067-1

Tyco 967 056-1

IP6K9K

-40ºC ... +110°C

Tyco 2-967 616-1

1,6 ... 1,9

gold plated

Tyco 965 906-5

Tyco 967 067-1

Tyco 967 056-1

0,5 ... 0,75

Contacts with diagram –

C1 L2

Pin 1 Pin 2 Pin 3 D1 u Pin 4 Pin 6 U

1 4

CW + on Pin 4 CW – on Pin 6 CCW + on Pin 6 CCW – on Pin 4

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

1 Contacts gold plated

SERVO MOTOR

XXXXXXX.9663.02400

A C T U A TOR S

Dimensions

10 R - 036112 Art.-Nr.:

A-A

ø9

ø 4,75 ±0,15

Hz bar bar

PA p-St

ø9 61

–0,3 21,9 +0,8

47 ±0,2

3,9

Made in Germany 9M

JJJJ-MM-TT

0,5 x 45°

10R-036112

72 ±0,2

32,6

±0

12,5 ±0,5 14,4 ±0,5

Coupling connection 91° ±1° 18,5 ±0,5

45,2 ±0,5

1 27,2 ±0,5

15° +3° –3°

91°

3°

±1°

±3

X 2:1

10 -0

0,2

10 -0

° +2 2° –

+2°

45° –2°

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

32,5 ±1

Tanker Control Systems With over 40 years experience working directly with global commercial vehicle manufacturers, IMI Precision Engineering have introduced a control box that pilot operates pinch valves on a vacuum tanker applications. The integrated solution comes with 3/2 push/pull valves, filter regulator and gauge all in one control box solution with options to include Emergency Stops within the Control Box as well as remotely mounting at accessible positions around the vehicle for additional safety. > Prevent tanker damage > Reduce operator error & improve ease of use

Engineering GREAT Solutions

> Integrated customised solutions > Many years of proven field experience > Easy to install robust solution > Faster service and easier to fault find > Easily upgradable > Fully local technical support

Find out more www.imi-precision.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

2 Fuel systems Fuel tank caps

Fuel tank vent

Return Flow Splitter

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering fuel system range. If you can’t see the option you require please contact us.

FUEL SYSTEMS

Fuel tank caps

Return flow splitter 2252 Series

Page 69

Page 72

Fuel tank vent 201 Series and 2113-1

Page 74

High-flow fuel tank vent 2989-11

Page 75

Linegard® breakaway valves 2200-1

Page 76

Online at store.norgren.com

FUEL TANK CAPS

• Protect the fuel system in the event of fire or a roll over

Technical Data

Materials

Options: Matching locking, venting, safety features*

Aluminium die-casting

FUEL SYSTEMS

• Norgren fuel caps incorporate a unique combination of thermal, pressure relief, and breather type caps

* Please contact your local Norgren technical representatives.

• Minimizes the opportunity for pressure to build up in the tank • All designs meet or exceed FHWA guidelines for leakage, drop tests and flame tests

Models Cap Size/ Thread Size

Thermal Relief

Pressure Relief

Venting

Locking

Chrome

Chain Length

31302-1

2" Closure only cap

2"-11.5 NPSM

10"

8103

2" Full function cap, chrome

2"-11.5 NPSM

Yes

12"

8105-2

2.5" Fuel cap for diesel fuel

2.5"-8 UN

Yes

12"

8110-1

3" Float style cap

3"-8 NPLS

Yes

12"

8111-1

3" Float style cap

3"-8 NPLS

Yes

12"

8120

3" Float style cap

3"-5.5 custom thread

Yes

12"

8121

3" Float style cap

3"-5.5 custom thread

Yes

12"

8130-1

4" Fuel cap for diesel fuel

4"-8 NPSM

Yes

12"

8131-1

4" Fuel cap for diesel fuel

4"-8 NPSM

Yes

12"

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Description

Model

FUEL TANK CAPS

FUEL SYSTEMS

Dimensions 31302

8103 and 8105 0.85

10" ± 1/2"

ø 2.95

2.95

ø 3.20

2.00 ± 0.03

0.92

THERMAL RELIEF MECHANISM

CHAIN LENGTH 12"

WIRE STAY

70 4.00 ± 0.13

Online at store.norgren.com

8110-1

8111-1

ø 4.0

ø 4.0 0.86 1.70 REF

0.86 1.70 REF

7.00 ± 0.50

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

FUEL TANK CAPS

2 FUEL SYSTEMS

8120

8121

ø 4.0

ø 4.0 0.86

0.86

1.70 REF

7.00 ± 0.50

8131 ø 4.95

ø 4.95

ENVIRONMENTAL SEAL ø 5.20

ø 5.20

PRESSURE RELIEF POPPET ASSEMBLY

2.00 ± 0.03

1.08

2.00 ± 0.03

1.08

THERMAL RELIEF MECHANISM

CHAIN LENGTH 12" CHAIN LENGTH 12" 8.50 ± 0.25

8.50 ± 0.25

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

8130

RETURN FLOW SPLITTER 2252 Series

FUEL SYSTEMS

• Evenly distributes return flow of fuel to the fuel tanks

Technical Data

• Eliminates the need for a crossover line

Material: Heavy duty zinc die cast construction

• Features identical variable flow openings to control return fuel flow

Operating temperature: -40°F to 180°F (-40°C to 82°C)

• Provides proper fuel balance in dual tank systems

Port size: 1/2" NPT Flow: A2252-2D: Fuel flow of 60 GPH the back pressure is approximately 13 inches H2O when both ports are open, and 30 inches when the ports are closed 2252-1: Fuel flow of 60 GPH, the back pressure is approximately 20 inches H2O

Dimensions Return Flow Splitter 2252-1

INLET 1/2-14 NPT THD.

1-1/2

Online at store.norgren.com

2-3/16

DATE CODE (P/N ON OTHER SIDE) 1-1/2 2-3/4

Ø 0.28 MOUNTING THRU HOLE 2 PL

1.25

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

OUTLET 1/2-14 NPT THD. 2 PL (OPPOSITE SIDE)

RETURN FLOW SPLITTER

2252 Series

FUEL SYSTEMS

High-flow Return Flow Splitter A2252-2

INLET 1/2-14 NPT THD.

1-1/2

2-3/16

DATE CODE (P/N ON OTHER SIDE) 1-1/2

OUTLET 1/2-14 NPT THD. 2 PL (OPPOSITE SIDE

2-3/4

1.25

Return Flow Splitter, Tee, 1/2" ports Model

Port Size

Thread Type

Flow

A2252-2D

1/2"-14

NPT

High

2252-1D

1/2"-14

NPT

Standard

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Ã&#x2DC; 0.28 MOUNTING THRU HOLE 2 PL

FUEL TANK VENT 201 Series and 2113-1

FUEL SYSTEMS

• 1/2" NPT male thread with 1/4" barb fitting

Technical Data

• Anti-spill protection

Pipe thread: 1/2-14 PTF

• Available with pressure relief and safety venting

Overflow hose diameter: 5/16" ID

• Provides tank breathing

Outward flow rate: 30 SCFH @ 6" water pressure Hex size: 1.0"

Dimensions 201–X

2113–1 1.0

YELLOW/GOLD FINISHED TOP

YELLOW/GOLD TOP BARBFINISHED FITTING FOR 5/16 I.D. HOSE Ø 0.31 SHANK Ø 0.36FOR BARB BARB FITTING 5/16 I.D. HOSE 0.31 DIA. SHANK 0.36 DIA. BARB 1" HEX

0.82

1.46

BARB FITTING FOR 5/16 I.D. HOSE 0.31 DIA. SHANK 0.36 DIA. BARB

1" HEX 1/2–14 PTF SAE SHORT THREAD

1" HEX

Online at store.norgren.com

1.00

1.00 0.82± 0.03

0.82± 0.03 1/2 NPT COVER

1/2 NPT COVER

2.01± 0.03

1/2-14 PTF SAE SHORT THREAD TANK PORT

2.01± 0.03

1/2-14 PTF SAE SHORT THREAD TANK PORT

1/2" NPT fuel tank vent Model

Thermal Relief

Pressure Relief

Diesel/Gas

201-1

Diesel/Gas

201-3

Diesel

2113-1

255 ± 25°F

5-10 PSIG

Diesel

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

HIGH-FLOW FUEL TANK VENT

2989-11

Technical Data

• Anti-spill protection

Pipe thread: 1/2-14 PTF

• Available with pressure relief and safety venting

FUEL SYSTEMS

• 1/2" NPT male thread with 1/4" barb fitting

Overflow hose diameter: 5/16" ID

• Provides tank breathing • Thermal and pressure relief

Outward flow rate: 70 SCFH @ 18" water pressure Hex size: 1.063"

1.063 HEX

1-17/32

Dimensions 1.063 HEX

BARB FITTING FOR 5/16 I.D. HOSE 0.31 DIA. SHANK 0.36 DIA. BARB

Ø 15/16

1-17/32

27/32

1/2-14 NPTF

3-5/32

27/32

1/2-14 NPTF

3-5/32

1/2" NPT high flow fuel tank vent Model

Thermal Relief

Pressure Relief

Diesel/Gas

2989-11

Yes

Diesel

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

BARB FITTING FOR 5/16 I.D. HOSE 0.31 DIA. SHANK 0.36 DIA. BARB

Ø 15/16

LINEGARD® BREAKAWAY VALVES 2200-1

FUEL SYSTEMS

• The valves separate in the event of an impact and seal off both the fuel tanks and crossover lines • Prevents loss of fuel while leaving the system intact

Technical Data Operating temperature: -40°F to 185°F (-40°C to 85°C) Port size: Male end: 7/8"-14 NPT Female end: 7/8"-14 NPT

• Available in different mounting configurations for various applications • Valve shall flow less than 4.0 GPM of diesel fuel #2 at 70ºF (21ºC) at a different pressure of 1psi

Dimensions

76 45° MALE FITTING WITH 7/8-14 THREADS

0.76

0.38

THREAD PROTECTOR

Online at store.norgren.com

3.10 ±0.5 2.40 ±0.6

1-1/8 HEX 45° FEMALE FITTING WITH 7/8-14 THREADS THREAD PROTECTOR

Fuel Crossover Line Protection Model

Port Size

Thread Type

2200-1

7/8"-14

NPT

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

3 Valves Compressed Natural Gas options

Push pull valve with status indicator

CV45

Rugged and Reliable

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering valves range. If you can’t see the option you require please contact us.

VALVES

In-Line Valves And Valve Islands V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

Page 80

VS18 - Mini ISO 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

Page 94

Page 131

Solenoid Poppet Valves 90-22327, 90-22295 3/2

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

Page 106

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

Page 127

Page 129

ASAP Series Air Solenoid Acessory Pack

Page 104

Manual and Mechanical Valves Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

VHLA Series, 4/2 and 4/3 3/2

78 Page 108

Page 142

Online at store.norgren.com

Natural Gas Valves 1406076.4280.02400, 1406076.9356.02400 3/2

85410/85430 2/2

Page 144

Page 146

Seat and Dash Valves 3281 Series Dash valve 3/2

3013 -4 Series Paddle Seat Control Valve

Page 152

Page 154

Toggle Switches 3200 -1A Series - Air/ Electric Switch

Page 157

3202-1A Series - Air Switch

Page 158

3013-5 Series - Electric/ Pneumatic combination paddle seat valve

Page 156

134-4 Series - Removable Knob Seat Valve

Page 153

3000 Series Electric/Penumatic combination valve

Page 155

Fast Find Guide

Please note: These products represent only part of the IMI Precision Engineering valves range. If you canâ&#x20AC;&#x2122;t see the option you require please contact us.

VALVES

Flipper Control Valves 3220-1 Series

3222-1 Series

Page 159

Page 160

Other valves and accessories 5040 Series Lift Axle Control Module 3/2

Page 148

4111 Series Rapid Dump Valve

223 Series Pressure Protection Valves (PPV)

Page 151

Page 161

Check Valves

4000 Series Fastbrake Quick Exhaust Valve

Page 162

CV 85 Series Urea Tank Heating Valve

Page 163

Page 164

Online at store.norgren.com

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

VALVES

• 3/2, 5/2, 5/3 and 2 x 3/2 solenoid actuated valves

Technical Data

Materials

• G1/8 … G1/2

Medium: Compressed air, filtered, lubricated or non-lubricated

Body/sub-base: Aluminium

• Proven sealing system maintenance-free

Softseal spool: NBR/stainless steel

Ambient temperature: -10°C … +50°C

• Different manual override options available

Air supply must be dry enough to avoid ice formation at temperatures below +2°C

• Manifold system for easy assembly

Springs: Stainless steel

Models - Solenoid actuated Actuation

G1/8

Operating Pressure (bar)

G1/4

Operating Pressure (bar)

G3/8

Operating Pressure (bar)

G1/2

Operating Pressure (bar)

3/2 & 5/2

750

–

1300

–

2600

–

4500

–

2x3/2 & 5/3

500

–

950

–

1900

–

2200

–

Sol/Air Spring NC

V60A413A-A2000

2 … 10

V61B413A-A2000

2 … 10

V62C413A-A2000

2 … 10

V63D413A-A2000

3 … 10

Sol / Spring NC

V60A417A-A2000

2 … 10

V61B417A-A2000

2 … 10

V62C417A-A2000

2 … 10

V63D417A-A2000

2 … 10

Sol/Sol

V60A411A-A3000

1,5 … 10

V61B411A-A3000

1,5 … 10

V62C411A-A3000

1,5 … 10

V63D411A-A3000

2 … 10

V60AA11A-A2000

2 … 10

V61BA11A-A2000

2 … 10

V62CA11A-A2000

2 … 10

–

Sol/Air Spring

V60A513A-A2000

2 … 10

V61B513A-A2000

2 … 10

V62C513A-A2000

2 … 10

V63D513A-A2000

3 … 10

Sol / Spring

V60A517A-A2000

3 … 10

V61B517A-A2000

3 … 10

V62C517A-A2000

3 … 10

V63D517A-A2000

3 … 10

Sol/Sol

V60A511A-A3000

1,5 … 10

V61B511A-A3000

1,5 … 10

V62C511A-A3000

1,5 … 10

V63D511A-A3000

2 … 10

Sol/Sol APB

V60A611A-A3000

3 … 10

V61B611A-A3000

3 … 10

V62C611A-A3000

3 … 10

V63D611A-A2000

3 … 10

Sol/Sol COE

V60A711A-A3000

3 … 10

V61B711A-A3000

3 … 10

V62C711A-A3000

3 … 10

V63D711A-A2000

3 … 10

Sol/Sol COP

V60A811A-A3000

3 … 10

V61B811A-A3000

3 … 10

V62C811A-A3000

3 … 10

Straight Fitting

C02250618

–

C02250828

–

C02251038

–

C02251248

–

Elbow Fitting

C02470618

–

C02470828

–

C02471038

–

C02471248

–

Silencer

T40C1800

–

T40C2800

–

T40C3800

–

T40C4800

–

Basic Plug

M/P19063

–

M/P19063

–

M/P19063

–

M/P19063

–

Flow (l/min)

3/2 Valves

2 x 3/2 Valves Sol/Spring NC

5/2 Valves

5/3 Valves

Online at store.norgren.com

Accessories

Note: For Manual Overide Options - Digit 10 is :- 2 - Turn & Lock (Standard - Sol/Spring), 3 Push Only (Standard - Sol/Sol). Note: The above are for valves without coils - for coils to be included remove 000 and replace with Coil Code from the tables below. Note: APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure, NC = Normally closed.

Voltage codes and spare coils Model

Voltage

Coil code

Electrical details for solenoid operators

Power inrush/hold

22 mm coil for connector interface acc. to industrial standard QM/48/12/J/21

12 V d.c.

12J

QM/48/13J/21

24 V d.c

13J

QM/48/18J/21

110/120V 50/60Hz

18J

4/2,5 VA

QM/48/19J/21

220/240 V 50/60 Hz

19J

6/5 VA

22 mm coil for connector interface acc. EN 175 301-803, form B V10626-A12L

12 V d.c

12L

V10626-A13L

24 V d.c

13L

V10626-A18L

110/120 V 50/60 Hz

18J

4/2,5 VA

V10626-A19L

220/240 V 50/60 Hz

19J

6/5 VA

Voltage tolerance:

± 10%

Rating:

100% continuous duty

Inlet orifice:

0,8 mm

Electrical connection (corresponding to choosen coil):

EN 175301-803 - Form B, 22 mm

Solenoid:

4 x 90° rotable

Manual override:

Without

# =1

Push and turn to lock

#=2

Push only (not lockable)

#=3

Protection class:

Connector plugs must be ordered separately. Other voltages available, please contact us. Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Industrial Standard, 22 mm

IP 65 (with sealed plug)

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

Actuation

G1/8

Operating pressure (bar)

Pilot pressure external (bar)

G1/4

Operating Pressure (bar)

Pilot pressure external (bar)

G3/8

Operating pressure (bar)

Pilot pressure external (bar)

G1/2

Operating pressure (bar)

Pilot pressure external (bar)

3/2 & 5/2

750

–

1300

–

2600

–

4500

–

2x3/2 & 5/3

500

–

950

–

1900

–

2200

–

VALVES

Models - Pilot actuated

Flow (l/min)

3/2 Valves Air/Spring NC

V60A4D7A-XA090 -0,9 … 10

2,5 … 10 V61B4D7A-XA090 -0,9 … 10

2,5 … 10 V62C4D7A-XA090 -0,9 … 10

2,5 … 10 V63D4D7A-XA090

-0,9 … 16

3 … 16

Air/Spring NO

V60A3D7A-XA090 -0,9 … 10

2,5 … 10 V61B3D7A-XA090 -0,9 … 10

2,5 … 10 V62C3D7A-XA090 -0,9 … 10

2,5 … 10 V63D3D7A-XA090

-0,9 … 16

3 … 16

Air/Air NC

V60A4DDA-XA020 -0,9 … 10

1,5 … 10 V61B4DDA-XA020 -0,9 … 10

1,5 … 10 V62C4DDA-XA020 -0,9 … 10

1,5 … 10 V63D4DDA-XA020

-0,9 … 16

1,5 … 16

Air/Air NC/NC

V60AADDA-XA020 2 … 10

2 … 10

V61BADDA-XA020 2 … 10

2 … 10

V62CADDA-XA020 2 … 10

2 … 10

–

Air/Air NO/NO

V60ABDDA-XA020 2 … 10

2 … 10

V61BBDDA-XA020 2 … 10

2 … 10

V62CBDDA-XA020 2 … 10

2 … 10

–

Air/Air NO/NC

V60ACDDA-XA020 2 … 10

2 … 10

V61BCDDA-XA020 2 … 10

2 … 10

V62CCDDA-XA020 2 … 10

2 … 10

–

Air/Spring

V60A5D7A-XA090 -0,9 … 10

2,5 … 10 V61B5D7A-XA090 -0,9 … 10

2,5 … 10 V62C5D7A-XA090 -0,9 … 10

2,5 … 10 V63D5D7A-XA090

-0,9 … 16

3 … 16

Air/Air

V60A5DDA-XA020 -0,9 … 10

1,5 … 10 V61B5DDA-XA020 -0,9 … 10

1,5 … 10 V62C5DDA-XA020 -0,9 … 10

1,5 … 10 V63D5DDA-XA020

-0,9 … 16

1,5 … 16

Air/Air APB

V60A6DDA-XA020 -0,9 … 10

3 … 10

V61D6DDA-XA020 0,9 … 10

3 … 10

V62C6DDA-XA020 -0,9 … 10

3 … 10

V63D6DDA-XA020

-0,9 … 10

3 … 10

Air/Air COE

V60A7DDA-XA020 -0,9 … 10

3 … 10

V61D7DDA-XA020 -0,9 … 10

3 … 10

V62C7DDA-XA020 -0,9 … 10

3 … 10

V63D7DDA-XA020

-0,9 … 10

3 … 10

Air/Air COP

V60A8DDA-XA020 -0,9 … 10

3 … 10

V61D8DDA-XA020 -0,9 … 10

3 … 10

V62C8DDA-XA020 -0,9 … 10

3 … 10

–

Straight Fitting

C02250618

–

C02250828

–

C02251038

–

C02251248

–

Elbow Fitting

C02470618

–

C02470828

–

C02471038

–

C02471248

–

Silencer

T40C1800

–

T40C2800

–

T40C3800

–

T40C4800

–

Straight Fitting - Pilot Port

C02250618

–

C02250618

–

C02250618

–

C02250618

–

Elbow Fitting - Pilot Port

C02470618

–

C02470618

–

C02470618

–

C02470618

–

2 x 3/2 Valves

5/2 Valves

5/3 Valves

Accessories

Online at store.norgren.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Note: APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure, NC = Normally closed, NO = Normally open, NC/NC = Both valves normally closed (port P), NO/NO = Both valves normally open (port P), NO/NC = 1valve normally open, 1 valve normally closed (port P).

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

VALVES

Option selector (directional control valves,solenoid actuated) Valve size

V6˙˙˙˙˙A-A˙˙˙˙

Substitute

Plug Interface

Substitute

G1/8

22 mm, industrial standard

G1/4

G3/8

22 mm, to EN 175301-803 (DIN 43650), Form B

G1/2

Voltage

Substitute

12 V d.c. 2 W

1/8 NPT

24 V d.c. 2 W

1/4 NPT

24 V a.c. (50/60 Hz) 4/2,5 VA

3/8 NPT

110/120 V a.c. (50/60 Hz) 4/2,5 VA

1/2 NPT

220/240 V a.c. (50/60 Hz) 6/5 VA

NPT-Valve size

Function

Manual override

Substitute

Push, locked position

3/2 - NC

Push only

5/2

Without

5/3 - APB

6 7

Pilot Supply

Substitute

5/3 - COE

Actuation/ return

5/3 - COP

Sol/Sol

Internal

2 x 3/2 - NC

Sol/air spring

Internal

2 x 3/2 - NO

Sol/spring

Internal

2 x 3/2 - NO/NC

3/2 - NO

Sol/Sol

External

Sol/air spring

External

Sol/spring

External

82 (directional control valves, pilot actuated)

Online at store.norgren.com

Port size ISO G

V6˙˙˙D˙A-X˙˙˙0

Substitute

Actuation/return

Substitute

G1/8

Air/Air

G1/4

Air/Spring

G3/8

Pilot port

Substitute

G1/8

G1/2 Port size NPT

Substitute

1/8 NPT

A P

1/8 NPT

Actuation/return

1/4 NPT

Air/Air

3/8 NPT

Air/Spring

1/2 NPT

Function

Substitute

3/2 - NO

3/2 - NC

5/2

5/3 - APB

5/3 - COE

5/3 - COP

2 x 3/2 - NC

2 x 3/2 - NO

2 x 3/2 - NO/NC

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Substitute

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

Series

Manifold* 2 to 9 stations

Bracket for manifold

Blanking plug for unused valve station

10 and 12 stations

V60

263962 *1)

263963 *2)

0555485

0491586

V61

263942 *1)

263943 *2)

0555484

0491587

VALVES

Manifold system for common pressure supply (V60 and V61)

* Supplied with bolt and sealing washers. *1) Insert station code after model numbers: 2, 3, 4, 5, 6, 7 and 8. *2) Insert station code after model numbers: 9 (for V61 only), 0 for 10 and 2 for 12.

Sub-bases Series

Valve stations 2

V60

2221002000000000

2221003000000000

2221004000000000

2221006000000000

2221012000000000

V61

2221102000000000

2221103000000000

2221104000000000

2221106000000000

2221112000000000

V62

2221202000000000

2221203000000000

2221204000000000

2221206000000000

2221212000000000

Accessories for sub-bases Blanking plate

Blanking plug for 2 station and 3 station manifolds

Pressure shut-off for 4 station op to 12 station manifolds

Pressure shut-off for ports 3 & 5 (R & S)

DIN rail mounting kit

V60

0100561000000000

0701208000000000

0100567000000000

0110236000000000

0101796000000000

V61

0100563000000000

0701209000000000

0100569000000000

0110237000000000

0101796000000000

V62

0100565000000000

0701210000000000

0100571000000000

0110238000000000

0101796000000000

Coil accessories

Connector plugs - ordered separately

Diffusor for pilot exhaust

Circlip for coil fixing

Industrial standard 22 mm 2-pole + PE

22 mm, EN 175301-803 (DIN 43650 B) Form B 2-pole + PE

81110800

81021600

0657868000000000 12 … 250 V a.c./d.c.

0680003000000000 12 … 250 V a.c./d.c.

0680000000000000 15 … 30 V DC; LED, surge surpression

0664811000000000 15 … 30 V DC; LED, surge surpression

0680001000000000 150 … 250 V a.c.; glim lamp

0664812000000000 150 … 250 V a.c.; glim lamp

Note: Light emitting gaskets can not be used.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Series

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

3/2 Sol/Spring V60-V62

3/2 Sol/Spring V63

VALVES

Dimensions

C E

X D

2 1 T

M 2

1 0

20,5

2 K

L 20,5

R U

3/2 Sol/Air Spring V60-V62

3/2 Sol/Air Spring V63

B 2 (0 V60)

M N

10/12

Q 1 0

1 0

G N

1 T

20,5

1 10/12

2 K

L 20,5

Online at store.norgren.com

R U

1 Collected pilot exhaust (M5) 2 Manual Override

3 V62: Central mounting hole (left hole is not applicable) and square end cover 4 External pilot port, M5 (V60 & V61), G1/8

Model

ØD

ØR S

ØT

ØU

V60A417A—…

125

4,5

G1/8

–

3,2

–

6,5

–

V61B417A—…

147

57,5

4,5

22,5

G1/4

–

3,2

–

6,5

–

V62C417A—…

166,5

24,5

4,5

–

83,5

G3/8

–

4,5

–

V63D417A—…

197

87,5

108

33,5

–

G1/2

–

18,5 5,5

–

V60A413A—…

116,5

4,5

G1/8

–

3,2

–

6,5

–

V61B413A—…

132,5

4,5

G1/4

–

3,2

–

6,5

–

V62C413A—…

147

50,5

24,5

4,5

–

83,5

G3/8

–

4,5

–

V63D413A—…

190

108

–

G1/2

–

18,5 5,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 3/2 Sol/Sol V63

VALVES

3/2 Sol/Sol V60-V62

(B) 1

(B)

X D

1 F G

20,5

12 3

L 20,5

G M N

2 1 0

1 0

1 Collected pilot exhaust (M5) 2 Manual Override

3 V62: Central mounting hole (left hole is not applicable) and square end cover 4 External pilot port, M5 V60 & V61), G1/8

ØD

ØR

ØT

ØU

V60A411A—…

116,5

4,5

G1/8

–

3,2

–

6,5

–

V61B411A—…

132,5

4,5

G1/4

–

3,2

–

6,5

–

V62C411A—…

147

50,5

24,5

4,5

–

83,5

G3/8

–

4,5

–

V63D411A—…

190

108

–

G1/2

–

18,5

5,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Model

IN-LINE VALVES

VALVES

5/2 Sol/Spring V60-V62

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 5/2 Sol/Spring V63 A

A B

C E

1 F

2 V

L 20,5

D 20,5

T Z G

M 2

1 0

5/2 Sol/Air Spring V60-V62

5/2 Sol/Air Spring V63 A

A B

B 2 (0 V60)

Online at store.norgren.com

2 V

3 10/12

4 5

L 20,5

D 20,5

F G

12/14

T Z G

M 2

1 0

1 Collected pilot exhaust (M5) 2 Manual Override

Model

V60A517A—… 140

52,5

32,5 4,5

ØD

33,5 8

3 V62: Central mounting hole (left hole is not applicable) and square end cover 4 External pilot port, M5 (V60 & V61), G1/8

G1/8 –

ØR

ØT

ØU

3,2

–

6,5

–

V61B517A—… 167

67,5

4,5

22,5 26

G1/4 –

3,2

–

6,5

–

V62C517A—… 191

4,5

–

108

G3/8 –

4,5

–

24,5 26

–

V63D517A—… 235

106,5 76

V60A513A—… 132

44,5

V61B513A—… 153

32,5 4,5

33,5 8

146

33,5 52

–

G1/2 –

–

5,5

–

57,5 3

115

G1/8 –

3,2

–

6,5

–

4,5

G1/4 –

3,2

–

6,5

–

V62C513A—… 171,5 62,5

4,5

–

108

8,5

G3/8 –

4,5

–

24,5 26

–

V63D513A—… 228

146

–

G1/2 –

–

5,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

57,5 3

115

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 5/2 Sol/Sol V63 A

(B)

F G

3 T

Z G

M 1

12 (10)

L 20,5

14 (10)

D 20,5

E 3

VALVES

5/2 & 2x3/2 Sol/Sol V60-V62

1 0

1 Collected pilot exhaust (M5) 2 Manual Override 3 V62: Central mounting hole (left hole is not applicable)

ØD

ØR

ØT

ØU

V60A511A—…

174,5

87,5

32,5

4,5

33,5

G1/8

3,2

–

6,5

–

V60AA11A—…

174,5

87,5

32,5

4,5

33,5

G1/8

3,2

–

6,5

–

V61B511A—…

199

99,5

4,5

G1/4

3,2

–

6,5

–

V61BA11A—…

199

99,5

4,5

G1/4

3,2

–

6,5

–

V62C511A—…

218

109

4,5

–

108

G3/8

4,5

–

24,5

–

V62CA11A—…

218

109

4,5

–

108

G3/8

4,5

–

24,5

–

V63D511A—…

257

128,5 76

146

–

G1/2

–

5,5

–

57,5

115

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Model

IN-LINE VALVES

VALVES

5/3 Sol/Sol V60-V62

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2

A 2 (0 V60)

E X

12 3

14 K

L 20,5

F G

M 2

P 1 0

1 0

1 Collected pilot exhaust (M5) 2 Manual Override 3 V62: Central mounting hole (left hole is not applicable) and square end cover 4 External pilot port, M5 (V60 & V61), G1/8

R U

Online at store.norgren.com

Model

ØD

ØR

ØU

V60A611A—…

188,5 101,5 32,5

4,5

33,5

G1/8

3,2

6,5

V60A711A—…

188,5 101,5 32,5

4,5

33,5

G1/8

3,2

6,5

V60A811A—…

188,5 101,5 32,5

4,5

33,5

G1/8

3,2

6,5

V61B611A—…

217

117,5 42

4,5

G1/4

3,2

6,5

V61B711A—…

217

117,5 42

4,5

G1/4

3,2

6,5

V61B811A—…

217

117,5 42

4,5

G1/4

3,2

6,5

V62C611A—…

240,5 131,5 49

4,5

–

108

22,5

G3/8

23,5

4,5

24,5

V62C711A—…

240,5 131,5 49

4,5

–

108

22,5

G3/8

23,5

4,5

24,5

V62C811A—…

240,5 131,5 49

4,5

–

108

22,5

G3/8

23,5

4,5

24,5

V62C811A—…

240,5 131,5 49

4,5

–

108

22,5

G3/8

23,5

4,5

24,5

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 3/2NO Air/Spring V60-V61

A B

C E

E D

2 12 (1)3 G

F G

M N

R U

3/2NC Air/Spring V63 A

3/2NO Air/Spring V63 A

4,5

C X

O N

3 T

2 S

F H

O N

1 P

4 L

1 F

2 1

X D

1 Pilot ports G1/8 2 Alternative pilot ports G1/8 Model

ØD

ØR

ØT

ØU

V60A313A—…

89,5

4,5

–

G1/8

3,2

–

6,5

–

V61B313A—…

110

57,5

4,5

22,5

–

G1/4

3,2

–

6,5

–

V62C313A—…

89,5

4,5

–

G1/8

3,2

–

6,5

–

V63D313A—…

110

57,5

4,5

22,5

–

G1/4

3,2

–

6,5

–

V60A411A—…

132

24,5

4,5

–

83,5

–

33,5

G3/8

4,5

–

V61B411A—…

132

24,5

4,5

–

83,5

–

33,5

G3/8

4,5

–

V62C411A—…

162

87,5

108

33,5

–

39,5

–

G1/2

–

18,5

5,5

–

V63D411A—…

162

87,5

108

33,5

–

39,5

–

G1/2

–

14,5

5,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

4,5

3/2NO Air/Spring V62

2,5

1(3)

2 3

1 D

C 1

4,5

3/2NC Air/Spring V62

VALVES

3/2NC Air/Spring V60-V61

IN-LINE VALVES

VALVES

3/2NC Air/Air V60 & V61

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 3/2NC Air/Air V62

3/2NC Air/Air V63

4,5

(B)

4,5

(B)

F G

T F

O N

2,3

1 P

M N

2 I

1 Pilot ports G1/8 2 Alternative pilot ports G1/8

Online at store.norgren.com

Model

V60A4DDA—…

44,5

4,5

–

G1/8

3,2

–

6,5

–

V61B4DDA—…

104

4,5

–

G1/4

3,2

–

6,5

–

V62C4DDA—…

124

24,5

4,5

–

83,5

33,5

G3/8

4,5

–

V63D4DDA—…

148

108

–

39,5

–

G1/2

–

18,5

5,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 5/2 Air/Spring V62

A 4,5

C E

VALVES

5/2 Air/Spring V60 & V61

F G

O M

2,5

5/2 Air/Spring V63

A 4,5

C D

1 F

V L

Online at store.norgren.com

E X

T Z G

O W

1 Pilot ports G1/8 or 1/8-27 NPT 2 Alternative pilot ports G1/8 or 1/8-27 NPT

Model

V60A5D7A—…

105

52,5

32,5

4,5

33,5

–

G1/8

43,5

3,2

–

6,5

–

V61B5D7A—…

130

67,5

4,5

22,5

–

G1/4

3,2

–

6,5

–

V62C5D7A—…

156

4,5

108

33,5

G3/8

4,5

–

24,5

–

V63D5D7A—…

200

106,5

146

33,5

–

39,5

–

G1/2

–

5,5 –

57,5

115

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

VALVES

5/2 & 2x3/2 Air/Air V60 & V61

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 5/2 & 2x3/2 Air/Air V62 A

A (B)

4,5

(B)

C E

14(10) 5

12(10)

14(10)

3 12(10)

G O

O M

2,3

5/2 & 2x3/2 Air/Air V63 A

4,5

(B)

C D

1 F

Online at store.norgren.com

E X

T Z G

O W

1 Pilot ports G1/8 2 Alternative pilot ports G1/8

Model

V60A5DDA—…

104,5

52,5

32,5

4,5

33,5

–

G1/8 44

3,2

–

6,5

–

V60AADDA—…

104,5

52,5

32,5

4,5

33,5

–

G1/8 44

3,2

–

6,5

–

V60ABDDA—…

104,5

52,5

32,5

4,5

33,5

–

G1/8 44

3,2

–

6,5

–

V60ACDDA—…

104,5

52,5

32,5

4,5

33,5

–

G1/8 44

3,2

–

6,5

–

V61B5DDA—…

124

4,5

–

G1/4 53

3,2

–

6,5

–

V61BADDA—…

124

4,5

–

G1/4 53

3,2

–

6,5

–

V61BBDDA—…

124

4,5

–

G1/4 53

3,2

–

6,5

–

V61BCDDA—…

124

4,5

–

G1/4 53

3,2

–

6,5

–

V62C5DDA—…

148

4,5

108 –

33,5

G3/8 64

4,5

–

24,5

–

V62CADDA—…

148

4,5

108 –

33,5

G3/8 64

4,5

–

24,5

–

V62CBDDA—…

148

4,5

108 –

33,5

G3/8 64

4,5

–

24,5

–

V62CCDDA—…

148

4,5

108 –

33,5

G3/8 64

4,5

–

24,5

–

V63D5DDA—…

186

146 –

–

39,5

–

G1/2 83

–

5,5

–

57,5

115

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V60 … 63 3/2, 2x3/2, 5/2 & 5/3, G1/8 … G1/2 5/3 Pilot/Pilot V62

4,5

C E

12 I

VALVES

5/3 Pilot/Pilot V60 & V61

F G

O M

2,5

5/3 Pilot/Pilot V63

A 4,5 4

(B)

Online at store.norgren.com

X E

14 L

7,5

G O W

1 Pilot ports G1/8 2 Alternative pilot ports G1/8

Model

V60A6DDA—…

118,5

32,5

4,5

33,5

–

G1/8

43,5

3,2

6,5

–

V60A7DDA—…

118,5

32,5

4,5

33,5

–

G1/8

43,5

3,2

6,5

–

V60A8DDA—…

118,5

32,5

4,5

33,5

–

G1/8

43,5

3,2

6,5

–

V61B6DDA—…

142

4,5

–

G1/4

3,2

6,5

–

V61B7DDA—…

142

4,5

–

G1/4

3,2

6,5

–

V61B8DDA—…

142

4,5

–

G1/4

3,2

6,5

–

V62C6DDA—…

170,5

96,5

4,5

108

22,5

33,5

G3/8

4,5

–

24,5

–

V62C7DDA—…

170,5

96,5

4,5

108

22,5

33,5

G3/8

4,5

–

24,5

–

V62C8DDA—…

170,5

96,5

4,5

108

22,5

33,5

G3/8

4,5

–

24,5

–

V63D6DDA—…

216

108

160

–

G1/2

–

V63D7DDA—…

216

108

160

–

G1/2

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

VALVES

• Solenoid actuated and pilot operated spool valve

Technical Data

Materials

• High flow in-line valves

Medium: Compressed air, filtered (40 μm) lubricated or non lubricated

Body/sub-base: Die-cast aluminium alloy or aluminium alloy, white painted

Mounting position: In-line or sub-base

Softseal spool: NBR/aluminium alloy

Ambient temperature: Pilot models: -5°C … +60°C Solenoid models: -5°C … +50°C

Mounting sheets/screws: Steel

• Compact and robust design • Low power energy efficient solenoids • Flexible in-line and manifold mounting options

Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Springs: Stainless steel

Models - Solenoid actuated G1/8

Operating Pressure (bar)

G1/4

Operating Pressure (bar)

G3/8

Operating Pressure (bar)

G1/2

Operating Pressure (bar)

3/2 & 5/2

480

–

1020

–

1705

–

2480

–

5/3

270

–

755

–

1190

–

1910

–

Actuation

–

Sol/Air Spring

V50A413A-A2***

2…8

–

Sol/Spring

–

V51B417A-A2***

2…8

V52C417A-A2***

2…8

V53D417A-A2***

2…8

Sol/Sol

V50A411A-A2***

2…8

V51B411A-A2***

2…8

V52C411A-A2***

2…8

V53D411A-A2***

2…8

Actuation

–

Sol/Air Spring

V50A513A-A2***

2…8

–

Sol / Spring

–

V51B517A-A2***

2…8

V52C517A-A2***

2…8

V53D517A-A2***

2…8

Sol/Sol

V50A511A-A2***

2…8

V51B511A-A2***

2…8

V52C511A-A2***

2…8

V53D511A-A2***

2…8

Actuation

–

Sol/Sol APB

V50A611A-A2***

3…8

V51B611A-A2***

3…8

V52C611A-A2***

3…8

V53D611A-A2***

3…8

Sol/Sol COE

V50A711A-A2***

3…8

V51B711A-A2***

3…8

V52C711A-A2***

3…8

V53D711A-A2***

3…8

Sol/Sol COP

V50A811A-A2***

3…8

V51B811A-A2***

3…8

V52C811A-A2***

3…8

V53D811A-A2***

3…8

Straight Fitting

C02250618

–

C02250828

–

C02251038

–

C02251248

–

Elbow Fitting

C02470618

–

C02470828

–

C02471038

–

C02471248

–

Silencer

T40C1800

–

T40C2800

–

T40C3800

–

T40C4800

–

Flow (l/min)

Models - 3/2 Valves

Models - 5/2 Valves

Models - 5/3 Valves

Online at store.norgren.com

Accessories

Voltage codes and spare coils

Electrical details for solenoid operators

V50 models only 15 mm coil for connector interface acc. EN 175 301-803, form C Model

Voltage

Power Inrush/Hold

Code

Voltage tolerance

± 10%

Rating

100% continuous duty

Inlet orifice

0,6 mm; V50 0,8 mm; V51 … V53

V12958-A12

12 V d.c.

2,9 W

12A

V12958-A13

24 V d.c.

2,9 W

13A

V12958-A18

110/120 V 50/60 Hz

3,7/3,1 VA

18A

V12958-A19

220/240 V 50/60 Hz

3,7/3,1 VA

19A

V51 … V53 series 22 mm coil for connector interface acc. to industrial standard Model

Voltage

Power Inrush/Hold

Code

QM/48/12J/21

12 V d.c.

12J

QM/48/13J/21

24 V d.c

13J

QM/48/18J/21

110/120 V 50/60 Hz

4/2,5 VA

18J

QM/48/19J/21

220/240 V 50/60 Hz

6/5 VA

19J

Electrical connection (corresponding to choosen coil)

EN 175301-803 - Form C; 15 mm; V50

Solenoid coil mounting

Four positions x 90°

Manual override

Push and turn to lock (plastic)

Protection class

IP 65 (with sealed plug)

Industrial Standard; 22 mm; V51 … V53

Connector plugs - included in delivery 15 mm, EN 175301-803 (DIN 43650 B) Form C 2-pole + PE

Industrial standard 22 mm 2-pole + PE

V10027-D00

0657868000000000

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

G1/8

Operating Pressure (bar)

Pilot Pressure external (bar)

G1/4

Operating Pressure (bar)

Pilot Pressure external (bar)

G3/8

Operating Pressure (bar)

Pilot Pressure external (bar)

G1/2

Operating Pressure (bar)

Pilot pressure external (bar)

Flow (l/min) 3/2 & 5/2

480

–

1020

–

1705

–

2480

–

2x3/2 & 5/3

270

–

755

–

1190

–

1910

–

VALVES

Models - Pilot actuated

Models - 3/2 Valves Actuation

–

Air/Air Spring NC

V50A4D3A-XA090 0 … 8

1,5 … 8 –

–

Air/Spring NC

–

V51B4D7A-XA090 0 … 8

1,5 … 8 V52C4D7A-XA090 0 … 8

2…8

V53D4D7A-XA090 0 … 8

2…8

Air/Air NC

V50A4DDA-XA020 0 … 8

1,5 … 8

V51B4DDA-XA020 0 … 8

1,5 … 8 V52C4DDA-XA020 0 … 8

2…8

V53D4DDA-XA020 0 … 8

2…8

–

Models - 5/2 Valves Actuation

–

Air/Air Spring

V50A5D3A-XA090 0 … 8

–

1,5 … 8 –

–

V50A5DDA-XA020 0 … 8

1,5 … 8

Air/Spring Air/Air

V51B5D7A-XA090 0 … 8

1,5 … 8 V52C5D7A-XA090 0 … 8

2…8

V53D5D7A-XA090 0 … 8

2…8

V51B5DDA-XA020 0 … 8

1,5 … 8 V52C5DDA-XA020 0 … 8

2…8

V53D5DDA-XA020 0 … 8

2…8

–

Models - 5/3 Valves Actuation

–

Air/Air APB

V50A6DDA-XA020 0 … 8

–

1,5 … 8

V51D6DDA-XA020 0 … 8

–

1,5 … 8 V52C6DDA-XA020 0 … 8

–

2…8

V53D6DDA-XA020 0 … 8

–

2…8

Air/Air COE

V50A7DDA-XA020 0 … 8

1,5 … 8

V51D7DDA-XA020 0 … 8

1,5 … 8 V52C7DDA-XA020 0 … 8

2…8

V53D7DDA-XA020 0 … 8

2…8

Air/Air COP

V50A8DDA-XA020 0 … 8

1,5 … 8

V51D8DDA-XA020 0 … 8

1,5 … 8 V52C8DDA-XA020 0 … 8

2…8

V53D8DDA-XA020 0 … 8

2…8

Accessories Straight Fitting

C02250618

–

C02250828

–

C02251038

–

C02251248

–

Elbow Fitting

C02470618

–

C02470828

–

C02471038

–

C02471248

–

T40C1800

–

T40C2800

–

T40C3800

–

T40C4800

–

C02250618

–

C02250618

–

C02250618

–

C02250618

–

Elbow Fitting - Pilot Port

C02470618

–

C02470618

–

C02470618

–

C02470618

–

For valve series

Manifold for 3 port valves SO G thread

Blanking plate for 3 port valves

Manifold for 5 port valves ISO G thread

Blanking plate for 5 port valves

V50 (1/8”)

V50A3 *1)

V500351

V50A5 *1)

V500551

V51 (1/4”)

V51B3 *1)

V510351

V51B5v

V510551

V52 (3/8”)

V52C3 *1)

V520351

V52C5 *1)

V520551

V53 (1/2”)

V53D3 *1)

V530351

V53D5v

V530551

*1) N umber of stations 02 … 08 for 2 … 8 stations.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Manifold system and blanking plates

Silencer Straight Fitting - Pilot Port

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

VALVES

Option selector V5˙˙˙1˙A-A2˙˙˙ Tube size

Substitute

Voltage (Series V50)

Substitute

1/8”

12 V d.c. 2,9 W

12A

1/4”

24 V d.c. 2,9 W

13A

3/8”

110/120 V a.c. (50/60 Hz) 3,7/3,1 VA

18A

1/2”

220/240 V a.c. (50/60 Hz) 3,7/3,1 VA

Thread

Substitute

Voltage (Series V51 ... V53)

19A Substitute

G 1/8

12 V d.c. 2 W

12J

G 1/4

24 V d.c. 2 W

13J

G 3/8

110/120 V a.c. (50/60 Hz) 4/2,5 VA

18J

G 1/2

220/240 V a.c. (50/60 Hz ) 6/5 VA

NPT-Thread

Substitute

Actuation

19J Substitute

1/8 NPT

Solenoid/air

1/4 NPT

Solenoid/spring

3/8 NPT

Solenoid/solenoid

1/2 NPT

Function

1 Substitute

3/2 Normally closed

5/2

5/3 All ports blocked

5/3 Centre open exhaust

5/3 Centre open pressure

V5˙˙˙D˙A-X˙0˙0 Thread size

Substitute

Air function

Online at store.norgren.com

1/8”

Pilot operated/pilot return

1/4”

Pilot operated/spring return

3/8”

Pilot port thread

G 1/8

1/2” Thread

Substitute 2 9 Substitute A

Substitute

1/8 NPT

G 1/8

Return

Substitute

G 1/4

Air spring

G 3/8

Spring

G 1/2

Air

NPT-Thread

Substitute

Function

Substitute

1/8 NPT

3/2 Normally closed

1/4 NPT

5/2

3/8 NPT

5/3 All ports blocked

1/2 NPT

5/3 Centre open exhaust

5/3 Centre open pressure

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

3/2 Single solenoid pilot valve, 1/8” port Air return

3/2 Single solenoid pilot valve, 1/4”… 1/2” ports Spring return

VALVES

Dimensions

J X

D 3

C AB

B A R

R 1

1 Manual override (Push and Turn) 2 Gland size Pg 7

3 Solenoid rotates 2 x 180° (V50), 4 x 90° (V51 … V53) 4 Gland size Pg 9

V50

99,5

13,5

21,5

15,5

3,2

55,5

–

1/8”

14,5

108

1/8”

3,2

29,5

0,5

V51

106,5

13,5

4,2

8,5

1/4”

120

1/4”

3,2

22,5

–

V52

126,5

4,5

46,5

39,5

3/8”

139,5

3/8”

4,5

–

V53

133

12,5

4,5

46,5

39,5

1/2”

146

1/2”

4,2

2,5

40,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Series Dimension No.

IN-LINE VALVES

VALVES

3 3/2 Double solenoid pilot valve, 1/8” port

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2 4 3/2 Double solenoid pilot valve, 1/4”… 1/2” ports J

C D

D 3

B A R Q

P AD

S W

N M

1 Manual override (Push and Turn) 2 Gland size Pg 7 Series Dimension No. A V50

3 Solenoid rotates 2 x 180° (V50), 4 x 90° (V51 … V53) 4 Gland size Pg 9

144,5

36,5

76,5

3,2

55,5

–

1/8”

14,5

161,5

1/8” 3,2 6

35,5

0,5

144,5

30,5

4,2

8,5

1/4”

188

1/4” 3,2 6

22,5

–

182

107

4,5

46,5

39,5

3/8”

208

3/8” 4,5 8

—

–

V53

188

30,5

114

4,5

46,5

39,5

1/2”

214

1/2” 4,2 8

2,5 23

58,5

–

5 5/2 Single solenoid pilot valve, 1/8” port Air return J

6 5/2 Single solenoid pilot valve, 1/4”… 1/2” ports Spring return J

L V I D

1 Manual override (Push and Turn) 2 Gland size Pg 7 3 Solenoid rotates 2 x 180° (V50),

A O P

B A

4 x 90° (V51 … V53)

4 Gland size Pg 9

P S

A B R2 P R1

A P R1

Online at store.norgren.com

V51 V52

Series

Dimension No. A

V50

14,5

3,2

–

1/8”

118,5

1/8”

3,2

32,5

110

V51

118,5

4,2

1/4”

1/8”

132

1/4”

3,2

22,5

V52

145,5

108

5,5

46,5

4,5

3/8”

158,5

3/8”

4,5

–

V53

157

120

4,5

46,5

1/2”

170

1/2”

4,2

4,5

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2 8

5/2 Double solenoid pilot valve, 1/8” port

5/2 Double solenoid pilot valve, 1/4”… 1/2” ports

K 1

VALVES

D 3

B A R2 P R1 G

A P R1

O R

R 1

T N M

3 Solenoid rotates 2 x 180° (V50), 4 x 90° (V51 … V53) 4 Gland size Pg 9

V50

155

14,5

3,2

–

1/8”

172

1/8”

3,2

V51

173

4,2

1/4”

1/8”

200

1/4”

3,2

22,5

V52

201

126

5,5

46,5

4,5

3/8”

228

3/8”

4,5

–

V53

212

138

4,5

46,5

1/2”

238

1/2”

4,2

4,5

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Dimension No.

N M

1 Manual override (Push and Turn) 2 Gland size Pg 7

Series

IN-LINE VALVES

VALVES

5/3 Double solenoid pilot valve, 1/8” port

5/3 Double solenoid pilot valve, 1/4” port

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

K 2

L V I

D 3

B A R2 P R1 G

A P R1

C B

A O R

R 1

N M

100 11 5/3 Double solenoid pilot valve, 3/8”and 1/2” ports

B A R2 P R1 G

C B A R 1

1 Manual override (Push and Turn) 2 Gland size Pg 7 3 Solenoid rotates 2 x 180° (V50), 4 x 90° (V51 … V53) 4 Gland size Pg 9

Online at store.norgren.com

N M

Series

Dimension No.

V50

164

14,5

3,2

–

1/8”

181

1/8”

3,2

43,5

V51

194

119

4,2

1/4”

1/8”

221

1/4”

3,2

22,5

48,5

V52

254,5

179,5 26

5,5

46,5

4,5

3/8”

281,5

3/8”

4,5

–

V53

265,5

191,5 29

4,5

46,5

1/2”

291,5

1/2”

4,2

4,5

–

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2 13

3/2 Single air pilot valve, 1/8” port Air spring return

3/2 Single air pilot valve, 1/4”… 1/2” ports Spring return

VALVES

J X

D AB V

Dimension No.

V50

13,5

21,5

15,5

61,5

3,2

1/8”

14,5

1/8”

3,2

29,5

0,5

1/8”

13,5

V51

13,5

65,5

4,2

8,5

1/4”

3,2

22,5

–

1/8”

17,5

V52

4,5

46,5

39,5

3/8”

4,5

–

1/8”

V53

12,5

4,5

46,5

39,5

1/2”

4,2

2,5

40,5

–

1/8”

3/2 Double air pilot valve, 1/8” port

3/2 Double air pilot valve, 1/4”… 1/2” ports

Online at store.norgren.com

J X

D C

AB V

Series

Dimension No.

V50

13,5

21,5

15,5

3,2

1/8“

14,5

1/8“

3,2

29,5

0,5

1/8“

13,5

V51

13,5

4,2

8,5

1/4“

3,2

22,5

–

1/8“

17,5

V52

103

4,5

46,5

39,5

3/8“

4,5

–

1/8“

V53

12,5

110

4,5

46,5

39,5

1/2“

4,2

2,5

40,5

–

1/8“

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

101

Series

IN-LINE VALVES

VALVES

5/2 Single air pilot valve, 1/8” port Air spring return

5/2 Single air pilot valve, 1/4”… 1/2” ports Spring return

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2

K L

H F

B A R2 P R1

A P R1

H Y Z

O R Q

O P

N B

Dimension No.

V50

72,5

14,5

3,2

1/8“

14,5

1/8“

3,2

32,5

1/8“

13,5

V51

77,5

4,2

1/4“

1/8“

1/4“

3,2

22,5

1/8“

17,5

106

5,5

46,5

4,5

3/8“

4,5

–

1/8“

118

4,5

46,5

1/2“

4,2

4,5

1/8“

5/2 Double air pilot valve, 1/8” port

5/2 Double air pilot valve, 1/4”… 1/2” ports

B A R2 P R1

A P R1

O R

O P

Dimension No.

Series

Online at store.norgren.com

V52 V53

102

Series

R Q S

V50

14,5

3,2

1/8“

3,2

1/8“

13,5

V51

4,2

1/4“

1/8“

1/4“

3,2

22,5

1/8“

17,5

V52

122

5,5

46,5

4,5

3/8“

4,5

–

1/8“

V53

134

4,5

46,5

1/2“

4,2

4,5

1/8“

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

IN-LINE VALVES

V50 … V53 3/2, 5/2 or 5/3, G1/8 … G1/2 21

5/3 Double air pilot valve, 1/8” port

5/3 Double air pilot valve, 1/4” port J

K L

H F

B A R2 P R1

A P R1

H Y

B R2

VALVES

O R

O P

T N

R Q S

103

22 5/3 Double air pilot valve, 3/8”and 1/2” ports

Online at store.norgren.com

B A R2 P R1

D C

N B

Series

Dimension No.

V50

14,5

3,2

1/8

1/8”

3,2

1/8“

13,5

V51

112

4,2

1/4

1/8”

1/4”

3,2

22,5

45,5

1/8“

17,5

V52

175,5

5,5

46,5

4,5

3/8

3/8”

4,5

–

87,5

1/8“

V53

187,5

4,5

46,5

1/2

1/2”

4,2

4,5

93,5

1/8“

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

AIR SOLENOID ACESSORY PACK ASAP Series

VALVES

• Robust modular 3-way valve manifolding system

Technical Data

Materials

• Patented design provides flexibility to exceed your application needs

Medium: Compressed air, filtered, lubricated, non-lubricated

Body and endcaps: 30% glass filled PBT

• Customizable electrical connection to meet your specific requirements • Integrated fittings provide faster build times

Exhaust cover cap: 30% glass filled Nylon 6/6

Operation: 3/2 normally closed direct acting

Coil overmold: 15% glass filled PET

Solenoid: 9–16Vdc or 20.4–26.4Vdc 7 Watts

• Quicker installation with color-coded fittings caps • Simple to connect design for building the manifold length you require • Mountable in any orientation

Seals: Silicone, Nitrile, Viton and HNBR

Port Size: 3/8" Inlet – tube/push in fitting (PIF) 1/4" Outlet/Delivery – tube/ push in fitting (PIF)

Springs, armature, and pole piece: Stainless Steel Bobbin: 30% glass filled PPS

Operation pressure: Maximum 150 psig (10.35 bar)

• Fittings comply with US Department of Transportation, Federal Motor Vehicle Safety Standard (DOT FMVSS 106) • Integrated Push-To-Connect (PTC)

Valve and fittings: Brass

Flow characteristics: 3/8" Inlet Cv = 0.67 1/4" Delivery Cv = 0.14 Minimum orifice size: 0.078"

Mounting sleeve: Steel Tubing: Tubing should be to SAE J844

Temperature range: -40ºC to 100°C

Standards and Legislation Fittings comply with U.S. Department of Transportation, Federal Motor Vehicle Safety Standard (DOT FMVSS 106) (Mandatory requirements for inch tube fittings in U.S.A.), Society of Automotive Engineers SAE J1409, SAE J1410, SAE J1455 and SAE J2494-2.

104

Dimensions Online at store.norgren.com

2.53 (64) 1.88 (48)

0.63 (16)

2.53 (64) 1.88 (48) 0.34 (9)

0.34 (9)

0.63 n x 1.58 (n x n 40) x 1.58 (n x 40) (16) 1.58 (40) 1.58 (40) mtg holes mtg holes

0.65 (17)

1.62 (41)

1.62 (41) 3.66 (93)

1.58 (40)

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

3.66 (93)

AIR SOLENOID ACESSORY PACK

ASAP Series

Model

Function

Electrical Connection

Port Size

Voltage

Position

7201-70

3/2 NC

19" Flying leads

(1/4" PIF)

12 VDC

7239-58

3/2 NC

19" Flying leads

(1/4" PIF)

24 VDC

VALVES

Standard Models

End Plates Description

Position

7202-70

Inlet Left Hand End Plate (3/8â&#x20AC;? PIF)

7203-70

Cap Right Hand End Plate

105

Model

Configurable up to 8 stations,(B+A+A+A+A+A+A+A+A+C). Please consult factory for configurations using more than 8 stations.

Red

Yellow

Orange

Green

Black

Tan

Violet

Blue

White

Silver

48C34901

48C34902

48C34903

48C34904

48C34905

48C34906

48C34907

48C34908

48C34909

48C34910

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

1/4" Colored caps

SOLENOID POPPET VALVES 90-22327, 90-22295 3/2

VALVES

• Port size: Ø 14,3 mm • Temperature upto +125°C • Robust over-mould design • Suitable for use with push in cartridge fittings/blacking plugs accessories

Technical Data

Materials

Medium: Compressed air lubricated or non-lubricated

Valve base: PA glassfilled Coil: Copper wire

Operation: Solenoid direct operated poppet valve - Normally Closed

• TYCO HDSCS

Internal parts: Stainless steel

Inlet pressure: 5 ... 10 bar (72 ... 145 psi)

• IP69 • Any orientation operation

Seals: NBR/FPM

Outlet pressure: 0 ... 10 bar (0 ... 145 psi)

• Option to stack valves with use of O ring accessory

Orifice: 2 or 3 mm

• Vibration to ISO 16750-3 (2007) • Example applications: Differential lock, energy brake, horn signal, axle lift etc.

Port size: Ø 14,3 mm nominal at 8 mm from port opening Exhaust port: IP69 rating Ambient temperature: 90-22327 (Ø 2 mm) -25ºC ... +125°C 90-22295 (Ø 3 mm) -40ºC ... +85°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

106

Solenoid operators

Online at store.norgren.com

Nominal voltages

24 V d.c.

Duty cycle

100% ED

Protection diodes

1 x freewheeling, 1 x reverse polarity

Valve electrical connection mates with

T.E. connector 1-1418448-2

Standard options Model

Orifice (mm)

Power consumption (24 V @ 20°C coil temperature) (W)

Flow @ 2 bar (20°C) P1 » P2 (l/min)

P2 » P3 (l/min)

Weight (kg)

90-22327

Ø2

3,5

100

0,4

90-22295

Ø3

140

110

0,4

(1) + - (3)

1 O ring accessory (90-21978)

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

SOLENOID POPPET VALVES

90-22327, 90-22295 3/2

‘O’ ring

Straight adaptor

Elbow adaptor For Ø 6 x 1 mm Tube

90-21978

A1329-06N (Ø 6 x 1 mm tube) A1329-06

Blanking plug

VALVES

Accessories Use as single or stackable options Option 1: Use single valve. need to use blank plug (push in) accessory for one of inlet ports. Option 2: Use as stacked together, need to use ‘O’ ring accessory to allow seal plus pushing in fitting accessories including blanking plug.

A1221-03

A1221-01 (Ø 8 x 1 mm tube)

Dimensions

Fitting details for guidance Please refer to the fitting data sheets en 9.1.068 for details Straight adaptor A1221-01

Straight adaptor A1329-06N

24 42,5 +0,1 -0,2 47,5

ø6

14,5

ø8

14,5 32

ø21

Blanking plug A1221-03

107

ø19

Elbow adaptor A1329-06 ø19

19,3

ø19

4,5

14,5

ø20

Adaptor/plug assembly instruction (assembly tools are available on request) For guidance only! Press down

Assembly tool for elbow adaptor 14,3 ±0,15 6

8,2 ±0,15 >ø20

6 Pressing tool (not in scope of delivery) 7 Adaptor or plug 8 Press flush 9 Valve housing

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

>19,3

7,6 ±0,15

Online at store.norgren.com

22 22,5

5,5

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

VALVES

• Suitable for multi-directional flow and dual supply applications

Technical Data

Materials

• High flow rate

Medium: Compressed air, filtered, lubricated and non-lubricated

Plastic version for 3/2 way valves only Body and end cover: PA6

• Electrical style manual operators offer ease of use, and include several special use versions which can be used to comply with health and safety requirements

Operating pressure: Maximum 10 bar Flow: 1/8" 335 l/min 1/4" 965 l/min

Operators: Aluminium, steel, plastic etc. Seals: NBR

Ambient temperature: 0°C … +70°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Metal version Body: Diecast zinc

3/2 way PA body valves Metal versions are available on request

End cover: Aluminium or glass-filled nylon

Port assembly torque: Use recommended torque for fittings. This should not exceed 10 Nm, otherwise damage may occur to body.

Operators: Aluminium, steel, plastic etc.

108

PIF Ports: The PIF fittings are suitable for PA 11 or 12, PU (92 to 98 shore) and other plasticised or unplasticised tubing which conforms to the tolerances specified in BS5409, Part 1, 1976, light and normal duty, DIN 73378, DIN74234, NFE 49-100. Tube is to be cut square and free of burrs.

Seals: NBR

Online at store.norgren.com

Accessories

Models – 3/2 mechanical valves Model

Port size

Actuation

Body

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

03040002

G1/8

Plunger/spring

PA6

- 0,9 … 10

03840802

03040032

ø 6 mm

Plunger/spring

PA6

- 0,9 … 10

03840802

03060002

G1/4

Plunger/spring

Zinc

- 0,9 … 10

03860202

03041702

G1/8

Plunger/pilot

Zinc

- 0,9 … 10 *1)

03840802

03040202

G1/8

Roller/spring

PA6

- 0,9 … 10

03840802

03040232

ø 6 mm

Roller/spring

PA6

- 0,9 … 10

03840802

03060202

G1/4

Roller/spring

Zinc

- 0,9 … 10

03860202

03040902

G1/8

Roller/pilot

Zinc

- 0,9 … 10

18 *1)

03840802

03042702

G1/8

Roller lever/pilot

Zinc

- 0,9 … 10

9 *1)

03840802

03062402

G1/4

Roller lever/pilot

Zinc

- 0,9 … 10

9 *1)

03861202

03041102

G1/8

Roller lever/spring

PA6

- 0,9 … 10

03840802

03041132

ø 6 mm

Roller lever/spring

PA6

- 0,9 … 10

03840802

03061102

G1/4

Roller lever/spring

Zinc

- 0,9 … 10

03860202

03029302

G1/8

Roller lever (heavy duty) /spring

PA6

- 0,9 … 10

03840802

03029332

ø 6 mm

Roller lever (heavy duty)/spring

PA6

- 0,9 … 10

03840802

03041002

G1/8

One way trip lever/spring

PA6

- 0,9 … 10

03840802

03029402

G1/8

One way trip lever (heavy duty)/spring

PA6

- 0,9 … 10

03840802

03043202

G1/8

Antenna/spring

PA6

- 0,9 … 10

0,3 at tip

03843202

03043232

ø 6 mm

Antenna/spring

PA6

- 0,9 … 10

0,3 at tip

03843202

03042302

G1/8

Sensitive roller/spring

Zinc

- 0,9 … 10

03847302

*1) At zero bar, reset pressure 2 bar minimum. Pressure for pilot function is the minimum pressure to operate the valve. The valve may switch below this pressure.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

Model

Port size

Actuation

Body

Colour

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

03040402

G1/8

Button/spring

PA6

Black

- 0,9 … 10

03840802

03040432

ø 6 mm

Button/spring

PA6

Black

- 0,9 … 10

03840802

03040502

G1/8

Button/spring

PA6

Green

- 0,9 … 10

03840802

03040532

ø 6 mm

Button/spring

PA6

Green

- 0,9 … 10

03840802

03040602

G1/8

Button/spring

PA6

Red

- 0,9 … 10

03840802

03040632

ø 6 mm

Button/spring

PA6

Red

- 0,9 … 10

03840802

03060402

G1/4

Knob/spring

Zinc

Black

- 0,9 … 10

03861202

03034502

G1/8

Knob/spring

PA6

Black

- 0,9 … 10

03840802

03034532

ø 6 mm

Knob/spring

PA6

Black

- 0,9 … 10

03840802

03036602

G1/8

Button (palm)/spring

PA6

Red

- 0,9 … 10

03840802

03036632

ø 6 mm

Button (palm)/spring

PA6

Red

- 0,9 … 10

03840802

03036702

G1/8

Button (palm)/spring

PA6

Green

- 0,9 … 10

03840802

03036732

ø 6 mm

Button (palm)/spring

PA6

Green

- 0,9 … 10

03840802

03036802

G1/8

Button (palm)/spring

PA6

Black

- 0,9 … 10

03840802

03036832

ø 6 mm

Button (palm)/spring

PA6

Black

- 0,9 … 10

03840802

03040802

G1/8

Button/pilot

Zinc

Black

- 0,9 … 10 *1)

03840802

03042002

G1/8

Button/pilot

Zinc

Green

- 0,9 … 10 *1

03840802

03042102

G1/8

Button/pilot

Zinc

Red

- 0,9 … 10 *1

03840802

03060802

G1/4

Button/pilot

Zinc

Black

- 0,9 … 10 *1

03861202

03041402

G1/8

Button (shrouded)/spring

PA6

Black

- 0,9 … 10

03840802

ø 6 mm

Button (shrouded)/spring

PA6

Black

- 0,9 … 10

03840802

G1/8

Button (shrouded)/spring

PA6

Green

- 0,9 … 10

03840802

03041532

ø 6 mm

Button (shrouded)/spring

PA6

Green

- 0,9 … 10

03840802

03041602

G1/8

Button (shrouded)/spring

PA6

Red

- 0,9 … 10

03840802

ø 6 mm

Button (shrouded)/spring

PA6

Red

- 0,9 … 10

03840802

G1/8

Emergency stop/twist reset

PA6

Red

- 0,9 … 10

03840802

03042832

ø 6 mm

Emergency stop/twist reset

PA6

Red

- 0,9 … 10

03840802

03041902

G1/8

Rotary knob/set reset

PA6

Black

- 0,9 … 10

–

03840802

03041932

ø 6 mm

Rotary knob/set reset

PA6

Black

- 0,9 … 10

–

03840802

03033502801

G1/8

Button(Palm)/key

PA6

Red

- 0,9 … 10

03840802

03033532801

ø 6 mm

Button(Palm)/key

PA6

Red

- 0,9 … 10

03840802

030418 02801

G1/8

Key/key

PA6

Red

- 0,9 … 10

–

03840802

030418 22801

ø 6 mm

Key/key

PA6

Red

- 0,9 … 10

–

03840802

03042502

G1/8

Knob/knob

PA6

Black

- 0,9 … 10

03840802

03042532

ø 6 mm

Knob/knob

PA6

Black

- 0,9 … 10

03840802

03062502

G1/4

Knob/knob

Zinc

Black

- 0,9 … 10

03860202

03042402

G1/8

Knob/knob or pilot

Zinc

Black

- 0,9 … 10

03840802

03062702

G1/4

Knob/knob or pilot

Zinc

Black

- 0,9 … 10 *3)

03861202

03042602

G1/8

Knob lever/spring

PA6

Black

- 0,9 … 10

03840802

03043802

G1/8

Lever/spring

Zinc

Black

- 0,9 … 10

03840802

03063802

G1/4

Lever/spring

Zinc

Black

- 0,9 … 10

03860202

03040302

G1/8

Toggle/toggle

PA6

Black

- 0,9 … 10

03840802

03040332

ø 6 mm

Toggle/toggle

PA6

Black

- 0,9 … 10

03840802

03043702

G1/8

Lever/lever

PA6

Black

- 0,9 … 10

03840802

03029602

G1/8

Lever/lever

Zinc

Black

- 0,9 … 10

03840802

03063702

G1/4

Lever/lever

Zinc

Black

- 0,9 … 10

03860202

03048102

G1/8

Pedal/spring

Zinc

Black

- 0,9 … 10

03840802

03068102

G1/4

Pedal/spring

Zinc

Black

- 0,9 … 10

03860202

03048302

G1/8

Pedal/pedal

Zinc

Black

- 0,9 … 10

03840802

03068302

G1/4

Pedal/pedal

Zinc

Black

- 0,9 … 10

03860202

*1) At zero bar, reset pressure 2 bar minimum. *3) Reset pressure: 4 bar minimum. Pressure for pilot function is the minimum pressure to operate the valve. The valve may switch below this pressure.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

03041632 03042802

109

03041432 03041502

VALVES

Accessories

Models – 3/2 manual valves

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

VALVES

Accessories

Models – 3/2 adaptor valves for Klöckner Möller actuators Model

Port size

Actuation

Body

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

03029502

G1/8

Plunger/spring

PA6

- 0,9 … 10

03840802

03029532

ø 6 mm

Plunger/spring

PA6

- 0,9 … 10

03840802

Accessories

Models – 5/2 mechanical valves

110

Model

Port size

Actuation

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

X3044002

G1/8

Plunger/spring

- 0,9 … 10

03840802

X3064002

G1/4

Plunger/spring

- 0,9 … 10

03860202

X3045702

G1/8

Plunger/pilot

- 0,9 … 10

22 *1)

03840802

X3044202

G1/8

Roller/spring

- 0,9 … 10

03840802

X3064202

G1/4

Roller/spring

- 0,9 … 10

03860202

X3044902

G1/8

Roller/pilot

- 0,9 … 10

22 *1)

03840802

X3064902

G1/4

Roller/pilot

- 0,9 … 10

13 *1)

03861202

X3045102

G1/8

Roller lever/spring

- 0,9 … 10

03840802

X3065102

G1/4

Roller lever/spring

- 0,9 … 10

03860202

X3039302

G1/8

Roller lever (heavy duty)/spring

- 0,9 … 10

03840802

X3045002

G1/8

One-way trip/spring

- 0,9 … 10

03840802

X3039402

G1/8

One-way trip (heavy duty)/spring

- 0,9 … 10

03840802

X3046702

G1/8

Roller lever/pilot

- 0,9 … 10

9 *1)

03840802

X3066402

G1/4

Roller lever/pilot

- 0,9 … 10

9 *1)

03861202

X3047202

G1/8

Antennar/spring

- 0,9 … 10 *2)

0,3

N/A

X3046302

G1/8

Sensitive roller/spring

- 0,9 … 10 *2)

N/A

Online at store.norgren.com

*1) At zero bar, reset pressure 2 bar minimum. *2) Constant pilot pressure supply: 3 bar minimum. The oerating pressure for pilot function is the minimum pressure to operate the valve. The valve may switch below this pressure.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

Model

Port size

Actuation

Colour

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

X3044402

G1/8

Button (palm)/spring

Black

- 0,9 … 10

03840802

X3044502

G1/8

Button (palm)/spring

Green

- 0,9 … 10

03840802

X3044602

G1/8

Button (palm)/spring

Red

- 0,9 … 10

03840802

X3064402

G1/4

Button/spring

Black

- 0,9 … 10

03860202

X3038602

G1/8

Button (palm)/spring

Red

- 0,9 … 10

03840802

X3038702

G1/8

Button (palm)/spring

Green

- 0,9 … 10

03840802

X3038802

G1/8

Button (palm)/spring

Black

- 0,9 … 10

03840802

X3044802

G1/8

Button (palm)/pilot

Black

- 0,9 … 10 *1)

03840802

X3046002

G1/8

Button (palm)/pilot

Green

- 0,9 … 10 *1)

03840802

X3046102

G1/8

Button (palm)/pilot

Red

- 0,9 … 10 *1)

03840802

X3045402

G1/8

Button (shrouded)/spring

Black

- 0,9 … 10

03840802

X3045502

G1/8

Button (shrouded)/spring

Green

- 0,9 … 10

03840802

X3045602

G1/8

Button (shrouded)/spring

Red

- 0,9 … 10

03840802

X3046802

G1/8

Emergency stop/twist reset

Red

- 0,9 … 10

03847302

X3037502

G1/8

Button (palm)/key

- 0,9 … 10

–

03840802

X3045802801 G1/8

Key/key

- 0,9 … 10

–

03840802

X3045902

Rotary knob/knob reset

- 0,9 … 10

–

03840802

G1/8

Knob/knob

Black

- 0,9 … 10

03840802

G1/4

Knob/knob

Black

- 0,9 … 10

03860202

X3046402

G1/8

Knob, push/knob, pull or pilot

Black

- 0,9 … 10 *1)

03860202

X3064802

G1/4

Knob, push/knob, pull or pilot

Black

- 0,9 … 10 *1)

03861202

- 0,9 … 10

03840802

Black

- 0,9 … 10

03840802

X3046602

G1/8

Knob lever/spring

X3047802

G1/8

Lever/spring

G1/4

Lever/spring

Black

- 0,9 … 10

03860202

G1/8

Toggle/toggle

Black

- 0,9 … 10

03840802

X3044302

G1/8

Toggle/toggle

Black

- 0,9 … 10

03840802

X3047702

G1/8

Toggle/lever

Black

- 0,9 … 10

03840802

X3067702

G1/4

Toggle/lever

Black

- 0,9 … 10

03860202

X3048202

G1/8

Pedal/spring

Black

- 0,9 … 10

03840802

X3068202

G1/4

Pedal/spring

Black

- 0,9 … 10

03860202

X3048402

G1/8

Pedal/pedal

Black

- 0,9 … 10

03840802

X3068402

G1/4

Pedal/pedal

Black

- 0,9 … 10

03860202

*1) At zero bar, reset pressure 2 bar minimum. The oerating pressure for pilot function is the minimum pressure to operate the valve. The valve may switch below this pressure.

Models – 5/2 adaptor valves for Klöckner Möller actuators

Accessories

Model

Port size

Actuation

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

X0039502

G1/8

Plunger/spring

- 0,9 … 10

03840802

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

X3067802 X3029602

111

X3046502 X3066502

VALVES

Accessories

Models – 5/2 manual valves

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

Accessories

VALVES

Models – 5/3 manual valves Model

Port size

Actuation

Colour

Function

Operating pressure (bar)

Operating force (N)

Dimension No.

Spares kit

X3343802

G1/8

Lever/spring/lever

Black

APB

- 0,9 … 10

03840802

X3363802

G1/4

Lever/spring/lever

Black

APB

- 0,9 … 10

03860202

X3347802

G1/8

Lever/spring/lever

Black

COE

- 0,9 … 10

03840802

X3367802

G1/4

Lever/spring/lever

Black

COE

- 0,9 … 10

03860202

X3343702

G1/8

Lever/lever/lever

Black

APB

- 0,9 … 10

03840802

X3363702

G1/4

Lever/lever/lever

Black

APB

- 0,9 … 10

03860202

X3347702

G1/8

Lever/lever/lever

Black

COE

- 0,9 … 10

03840802

X3367702

G1/4

Lever/lever/lever

Black

COE

- 0,9 … 10

03860202

APB = All Ports Blocked, COE = Centre Open Exhaust.

Dimensions 112

03040002, 03040032 3/2 Plunger actuated spring return valve

03041702 3/2 Plunger actuated pilot return valve

03040202, 03040232 3/2 Roller actuated spring return valve

≤5

‘1’

'3'

G1/8

17 5,4 20

32,5

'10'

'1'

82,5

1 21

'2'

'12'

‘3’

‘10’

ø 5,4

9 17

'1'

‘2’

‘12’

M14 x 1,5

'3'

'10'

'2'

4,8

9 19

ø 7,5

M14 x 1,5

ø 5,4

ø24

'12'

ø 7,5

Online at store.norgren.com

4,8

G1/8

The plunger on this valve is designed for axial loading only. Nut and mounting washer kit supplied as optional extra part number 03 0430 00

Full movement: 4,8 mm Panel hole: Ø 15 mm The plunger on this valve is designed for axial loading only. This valve can be panel mounted.

Maximum recommended cam rise: 4,5 mm Cam angle of approach: 30° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF 5

03040902 3/2 Roller actuated pilot return valve

03041102, 03041132 3/2 Roller lever actuated spring return valve

03042702 3/2 Roller lever actuated pilot return valve

‘3’

'1'

‘10’ ‘1’

G1/8

5,4

‘2’

‘12’

19 '10'

'2'

ø 5,4

'3'

G1/8 20

9 19

19 ‘1’

5,4 34

'12'

‘10’

‘3’

‘2’

‘12’

4,5

VALVES

105

8,5

G1/8

Operating travel: 8 mm Over-travel: 3 mm Cam angle of approach: 45° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

03029302, 03029332 3/2 Heavy duty roller lever actuated spring return valve

03042302 3/2 Sensitive roller lever actuated spring return valve

03041002 3/2 One-way trip actuated spring return valve

113

Maximum recommended cam rise: 4,5 mm Cam angle of approach: 30° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

‘3’

'1'

‘1’

G1/8

‘10’

‘2’

'12'

5,4

'1'

8,5

1 21

5,5

'10'

110

Operating Travel: 8 mm Over-travel: 1 mm Cam angle of approach: 45° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

'3'

5,5

'2'

‘12’

ø 5,4

3 34

9 20

'10'

'3'

'2'

9 19

'12'

38 ø 5,4

8 1

113

G1/8

Pre-travel: 1 mm; Over-travel: 3 mm Cam angle of approach: 45° maximum Cam speed: 6,5 m/min. maximum

Cam rise: 9 mm Cam angle of approach: 90° maximum Cam speed: 2 m/min. maximum Operating speed: 120 cpm

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm 3 0,7 mm thick spacing washer must be used if additional mounting holes are used.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

03029402 3/2 Heavy duty one-way trip actuated spring return valve

03043202, 03043232 3/2 Antenna actuated spring return valve

X3044002 5/2 Plunger actuated spring return valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

'3'

45,5

'2'

'3'

'1'

'10'

G1/8

5,5

‘4’

‘14’

'1'

9 20

'12'

5,4

‘5’

‘2’ ‘1’

‘12’

'10'

10 20

'2'

ø 5,4

M14 x 1,5

'12'

ø 5,4

10 13

60,5 4,8

‘3’

32,5

99,5 161

7,5

G1/8

Operating movement: 10 mm minimum in any direction.

Full movement: 4,8 mm The plunger on this valve is designed for axial loading only. Nut and mounting washer kit supplied as optional extra part number 03 0430 00

X3045702 5/2 Plunger actuated pilot return valve

X3044202 5/2 Roller actuated spring return valve

X3044902 5/2 Roller actuated pilot return valve

114

Cam rise: 9 mm Cam angle of approach: 90° maximum Cam speed: 2 m/min. maximum Operating speed: 120 cpm

17 32,5

‘1’

‘5’

‘3’

G1/8 40

‘1’

‘4’

‘14’ ‘5’

‘3’

ø 7,5

Full movement: 4,8 mm Panel hole: Ø 15 mm The plunger on this valve is designed for axial mounting only. This valve can be panel mounted.

‘12’ ‘3’

G1/8 40

107,5

102,5

G1/8

‘1’

104,5

‘2’

‘12’

22 12

‘2’

‘4’

‘14’

‘12’

M14 x 1,5

‘5’

‘2’

‘4’

‘14’

5,4

G1/8

Maximum recommended can rise: 4,5 mm Cam angle of approach: 30° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

5,4

10 20

4,5

10 20

4,5

60,5

60,5 10 20

ø24

Online at store.norgren.com

≤5 4,8

Maximum recommended cam rise: 4,5 mm Cam angle of approach: 30° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm 3 0,7 mm thick spacing washer must be used if additional mounting holes are used.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF 17

X3045102 5/2 Roller lever actuated spring return valve

X3046702 5/2 Roller lever actuated pilot return valve

X3039302 5/2 Heavy duty roller lever actuated spring return valve

‘5’

‘1’

‘3’

122,5

'3'

22 36

'12' '1'

'5'

'2'

'14'

G1/8

'4'

‘12’

8,5

127,5

5,6

‘2’

19 59

‘3’

‘4’

‘14’

‘1’

‘12’

59 30

‘5’

‘2’

9,8

5,4

‘4’

‘14’

10 20

3 17

9 20

10 20 5,4

60,5

VALVES

G1/8

Operating travel: 8 mm; Over-travel: 3 mm Cam angle of approach: 45° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

Operating travel: 8 mm Over-travel: 1 mm Cam angle of approach: 45° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

X3046302 5/2 Sensitive roller lever actuated spring return valve

X3045002 5/2 One-way trip actuated spring return valve

X3039402 5/2 Heavy duty one-way trip actuated spring return valve

115

Operating travel: 8 mm Over-travel: 3 mm Cam angle of approach: 45° maximum Cam speed: 8 m/min. maximum Operating speed: 300 cpm

'4'

‘3’

'5'

131,5

'2' '12' '1'

'3'

40 60

G1/8

Pre-travel: 1 mm Over-travel: 3 mm Cam angle of approach: 45° maximum Cam speed: 6,5 m/min. maximum

G1/8

Cam rise: 9 mm Cam angle of approach: 90° maximum Cam speed: 2 m/min. maximum Operating speed: 120 cpm

8,5

135

5,4

'14'

‘1’

‘12’

9 64

‘5’

G1/8

‘2’

‘3’

‘4’

‘14’

‘1’

‘12’

9 20

9,8

5,4

‘5’

‘2’

‘4’

‘14’

5,4

95 28

Cam rise: 9 mm Cam angle of approach: 90° maximum Cam speed: 2 m/min. maximum Operating speed: 120 cpm

3 0,7 mm thick spacing washer must be used if additional mounting holes are used.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

60,5 10 20

Online at store.norgren.com

3 1

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

X3047202 5/2 Antenna actuated spring return valve

03060002 3/2 Plunger actuated spring return valve

03060202 3/2 Roller actuated spring return valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

43,2 60,5

10 20

11,5

‘5’

‘1’

G1/8

‘1’

‘2’ ‘12’

‘3’

6,5

‘10’

6,5

22 23

110

183

‘1’

‘3’

G1/8 1/4”

7,5

‘2’ ‘10’

‘3’

‘12’

‘14’

‘2’

‘12’ ‘4’

47 (51)

5,4 10 13

0 ... 8,5

92,5

G1/4

Panel hole: Ø 21 mm The plunger on this valve is designed for axial loading only.

Cam angle of approach: 45° maximum Cam speed: 6 m/min. maximum Operating speed: 200 cpm

03061102 3/2 Roller lever actuated spring return valve

03062402 3/2 Roller lever actuated pilot return valve

X3064002 5/2 Plunger actuated spring return valve

116

Operating movement: 10 mm minimum in any direction.

11,5 24

‘1’

124

Cam angle of approach: 45° maximum Cam speed: 5 m/min. maximum Operating speed: 150 cpm

11,5

‘1’

43,5

‘3’

11,5

46 119

124

28 G1/4

‘12’

‘5’

24 G1/8

‘2’

‘14’

G1/4

Cam angle of approach: 45° maximum Cam speed: 5 m/min. maximum Operating speed: 150 cpm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

‘4’

6,5

‘2’ ‘10’

‘3’

‘1’

‘3’

‘12’

‘10’

‘2’ ‘12’

Ø 24

11,5

11,5 23

G1/4

Panel hole: Ø 21 mm The plunger on this valve is designed for axial loading only.

0 ... 8,5

8 43

70 13,8

11,5

Online at store.norgren.com

70 13,8

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF 30

X3064202 5/2 Roller actuated spring return valve

X3064902 5/2 Roller actuated pilot return valve

X3065102 5/2 Roller lever actuated spring return valve

VALVES

69 65

65 11,5

11,5

6,5

‘1’

‘3’

11,5

‘5’

‘1’

‘3’

G1/8

11,5

146

11,5

28 7,5

‘3’

28 7,5

G1/4

‘12’

140

132

‘2’ ‘1’

‘5’

11,5

‘4’ ‘14’

‘12’

‘2’

‘14’

‘12’

‘5’

‘4’

‘2’

‘4’ ‘14’

6,5

G1/4

11,5

14,5

G1/4

Cam angle of approach: 45° maximum Cam speed: 6 m/min. maximum Operating speed: 200 cpm

Cam angle of approach: 45° maximum Cam speed: 5 m/min. maximum Operating speed: 150 cpm

X3066402 5/2 Roller lever actuated pilot return valve

03040402, 03040502, 03040602 3/2 Button operated spring return valves

03040802, 03042002, 03042102 3/2 Button operated pilot return valve

117

Cam angle of approach: 45° maximum Cam speed: 6 m/min. maximum Operating speed: 200 cpm

‘3’

11,5 46

ø 5,4

'2'

'3'

G1/8

'10' '1'

9 20

9 19

‘12’ ‘3’

G1/8

20 94

M14 x 1

G1/4

ø 24

M14 x 1 24

‘10’ ‘1’

5,4

154

11,5

‘2’

‘1’

ø 30

‘5’

'12'

4,8

‘2’ ‘12’

≤5

ø 30

‘4’ ‘14’

4,8

6,5

≤5

11,5

G1/8

Cam angle of approach: 45° maximum Cam speed: 5 m/min. maximum Operating speed: 150 cpm

These valves are suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00; a shrouded panel mounting kit is also available, reference 03 0429 00.

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

70 14,5

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

03036602, 03036702, 03036802 3/2 Button (Palm) operated spring return valves

03041402, 03041502, 03041602 3/2 Button (Shrouded) operated spring return valves

03042802, 03042832 3/2 Button (Palm) operated, twist return valve (Emergency stop)

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

9 20

'3'

'12'

'2'

'3'

'1'

'10' '1'

9 20

ø 5,4

'10'

1 2,

'1'

'2'

'12'

≤6

ø 5,4

ø 42

'3'

'10'

ø 34

'2'

'12'

ø 5,4

≤6

3,2

1 1

3,2 21

ø 38

M30 x 1

ø 38

≤10

These valves are suitable for panel mounting.

Valve latches when button is depressed and returns when the locking ring is rotated anti-clockwise. This valve is suitable for panel mounting.

03033502, 03033532 3/2 Button (Palm) operated key return valve

03029602 3/2 Toggle operated toggle return valve

03040302, 03040332 3/2 Toggle operated spring return valve

118

These valves are suitable for panel mounting.

‘1’

'3'

20 1 2,

3,2 21

'10' '1'

9 20

17 M14 x 1

'2'

90°

'12'

61 19

1 21

‘3’

‘10’

‘2’

ø 5,4

ø 24

≤5

ø 5,4

‘12’

'1'

'10'

'2'

ø 5,4

'3'

≤6

90°

'12'

Online at store.norgren.com

27 ≤6

G1/8

Valve latches when button is depressed. To reset, turn key. This valve is suitable for panel mounting.

Panel hole: Ø 22,5 mm This valve is suitable for panel mounting.

This valve is suitable for panel mounting. A fingertip extension is available for this valve, reference 07003301.

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF 43

03043802 & 03043702 3/2 Lever operated spring return valve

03042602 3/2 Knob lever operated spring return valve

03034502, 03034532 3/2 Knob operated spring return valve 03042502, 03042532 3/2 Knob operated knob return valve

'3'

27 36

17 1

‘1’

'2'

'10' '1'

61 19

1 21

ø 24

‘10’

‘3’

‘2’ ‘12’

ø 5,4

'3'

M14 x 1

9 19

'12'

'1'

108

38 M4

'10'

ø 22

21 G1/8

'2'

'12'

4,8

ø 5,4

3 8

VALVES

5,4 20

This valve is suitable for panel mounting. Panel hole: Ø 24 mm; Panel thickness: 8 mm maximum

This valve is suitable for panel mounting by means of an optional nut and washer, reference 03043000.

03042402 3/2 Knob operated, knob or pilot return valve

03041902, 03041923 3/2 Rotary knob operated rotary knob return valve

119

Model 03043702 features a positive detent. Panel hole: Ø 24 mm Panel thickness: 8 mm maximum

'12'

‘1’

G1/8 20

'2'

'3'

5,4 36

3 36

45°

ø 5,4

'10' '1'

27 ,1

102 19

3,2

ø 24

M14 x 1

45°

ø 42

‘3’

‘10’

ø 22

‘2’

≤6

38 9 19

Online at store.norgren.com

≤5 4,8

G1/8

This valve is suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00.

Switch shown in non-operated position This valve is sutiable for panel mounting.

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm 3 0,7 mm thick spacing washer must be used if additional mounting holes are used.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

03041802801, 03041832801 3/2 Key operated key return valve

03048102 3/2 Pedal operated spring return valve 03048302 3/2 Pedal operated pedal return valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

'2'

'3'

5° '10' '1'

187

45°

'12'

45°

ø 5,4

≤6

G1/8 3,2

100

68 12

120

The key is removable in both positions. Key slot shown in non-operated position. Two keys are supplied. This valve is suitable for panel mounting.

6,5

1 Port size G1/8 or ø 6 mm 2 37 mm for G1/8 and 45 mm for ø 6 mm

A foot guard is available for this valve, reference 03 0480 60.

X3044402, X3044502, X3044602 5/2 Button (Palm) operated spring return valves

X3038602, X3038702, X3038802, X3046802 5/2 Button (Palm) operated spring return valves

X3045402, X3045502, X3045602 5/2 Button (Shrouded) operated spring return valves

60,5

‘1’

‘3’

111,5

‘4’

‘14’ ‘5’

‘2’ ‘1’

‘12’ ‘3’

9 1

, 32

40 87

34,5

40 102

3,2

Operating force: 54 N These valves are suitable for panel mounting by means of an optional nut and washer, reference 03043000; a shrouded panel mounting kit is also available, reference 03042900.

G 1/8

These valves are suitable for panel mounting.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

M30 x 1

21 G1/8

ø 38

<10

G1/8

These valves are suitable for panel mounting.

‘12’

ø 34

‘5’

‘2’

M14 x 1

ø 42

‘3’

‘4’

‘14’

5,4

‘1’

‘12’

ø 30

‘5’

‘2’

‘4’

‘14’

≤6

5,4

4,8

60,5 10 20

10 20

60,5 10 20

≤5

Online at store.norgren.com

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF 54

X3044802, X3046002, X3046102 5/2 Button (Palm) operated pilot return valves]

X3045902 5/2 Rotary knob operated rotary knob return valve

X3037502 5/2 Button (Palm) operated key return valve

‘1’

‘5’

‘3’

9 40

‘1’

‘2’

‘5’

‘3’

‘1’

‘12’ ‘3’

9 40

1 2,

100,5

‘4’

‘14’

87 19

3,2

G1/8

3,2

G 1/8

G1/8

These valves are suitable for panel mounting by means of an optional nut and washer, reference 03043000; a shrouded panel mounting kit is also available, reference 03042900.

Switch shown in non-operated position This valve is sutiable for panel mounting.

X3029602 5/2 Toggle operated toggle return valve

X3044302 5/2 Toggle operated spring return valve

X3046602 5/2 Lever operated spring return valve

‘3’

‘5’ ≤5

‘14’

‘4’

‘5’

‘2’ ‘1’

‘12’ ‘3’

9 40

40 132

G1/8

Panel hole: Ø 22,5 mm This valve is suitable for panel mounting.

‘3’

ø 24

‘1’

‘12’

115

‘2’

M14 x 1

‘4’

G1/8

This valve is suitable for panel mounting. A fingertip extension is available for use on this valve, reference 07 0033 01.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

G 1/8

This valve is suitable for panel mounting. Panel hole: Ø 24 mm; Panel thickness: 8 mm maximum

‘14’

‘1’

‘12’

5,4

‘5’

‘2’

90°

‘4’

22 36

90°

‘14’

5,4

10 20

5,4

≤6

60,5

Online at store.norgren.com

60,5

10 20

121

3 0,7 mm thick spacing washer must be used if additional mounting holes are used.

Valve latches when button is depressed. To reset, turn key. This valve is suitable for panel mounting.

G1/8

‘12’

‘2’

116,5 M14 x 1

‘4’

‘14’

5,4

45°

22 36

‘12’

45°

5,4

ø 30

‘5’

‘2’

‘4’

‘14’

≤6

5,4

20 10 20

≤6

10 20

4,8

60,5

60,5 10 20

≤5

VALVES

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

X3343802, X3347802, X3343702, X3347702 5/3 Lever operated valves

X3046502 5/2 Knob operated knob return valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

17,5 17,5

60,5 10 20

‘5’

‘12’

‘1’

‘3’

M14 x 1

40 19

5,4

ø 24

10 M4

‘2’

9 36

60,5 20

‘4’

‘14’

G1/8 34,5

5,4

ø 22

4,8

≤5

‘5’ 21

‘1’

‘12’

‘14’

‘2’

G1/8 ‘4’

‘3’

This valve is suitable for panel mounting by means of an optional nut and washer, reference 03043000.

40 81

X3046402 5/2 Knob operated, knob or pilot return valve

X3045802801 5/2 Key operated key return valve

60,5

‘1’

‘12’

‘14’

‘3’

‘5’

9 36

‘4’

124,5

‘1’

‘12’ ‘3’

42 24

141

3,2

G1/8

21 G1/8

These valves are suitable for panel mounting by means of an optional nut and washer, reference 03043000.

G1/8

The key is removable in both positions. Key slot shown in non-operated position. Two keys are supplied. This valve is suitable for panel mounting.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

45°

‘2’

‘5’

‘2’

‘4’

ø 22

‘14’

45°

5,4

≤6

5,4

4,8

10 20

60,5 10 20

≤5

M14 x 1

Online at store.norgren.com

ø 24

122

All models are suitable for panel mounting, by means of a bezel kit, reference 03 3437 64. Panel hole: Ø 24 mm Panel thickness: 8 mm maximum

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

X3048202 5/2 Pedal operated spring return valve X3048402 5/2 Pedal operated pedal return valve

03068102 3/2 Pedal operated spring return valve 03068302 3/2 Pedal operated pedal return valve

187

VALVES

187

5°

G 1/8 65

G 1/4

100

6,5

123

6,5

A foot guard is available for this valve, reference 03048060.

03060402 3/2 Button operated spring return valve

03060802 3/2 Button operated pilot return valve

03062502 3/2 Knob operated knob return valve

‘1’

6,5

‘10’ ‘1’

‘3’

30,5

58,5

6,5

48,5

23 131,5

130

G 1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

G 1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ø 41

G 1/4

122

‘12’

‘1’

‘3’

‘2’ ‘10’

‘12’

6,5

48,5

11,5

‘2’ ‘10’

‘3’

≤8

‘2’ ‘12’

7 11,5

≤8 11,5

≤8

Online at store.norgren.com

G 1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

03062702 3/2 Knob operated, knob or pilot return valve

03063802, 03063702 3/2 Lever operated valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

≤8

134

11,5

‘1’

G1/4

30,5 23

113

139,5

M5 x 17

G 1/4

11,5

G 1/4

‘2’

‘12’

‘10’ ‘1’

‘3’

11,5

‘3’

6,5

58,5

‘10’

‘2’ ‘12’

6,5 23 23,5

X3064402 5/2 Button operated spring return valve

X3064802 5/2 Button operated pilot return valve

X3066502 5/2 Knob operated knob return valven

76,5

66,5 65

6,5

‘5’

‘1’

‘12’ ‘3’

‘5’

11,5

40 46

48,5

‘4’

‘14’

‘2’

‘4’

‘14’

11,5

‘12’

144

‘14’

‘3’

‘5’

30,5

48,5

6,5

24 ‘2’

‘1’

11,5

≤8

11,5

‘2’ ‘1’

‘12’ ‘3’

11,5 46

58,5

152

‘4’

≤8

11,5

≤8

66,5

154 G1/4

G1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

G1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ø 41

Online at store.norgren.com

Model 03063702 features a positive detent in each position. Both models are suitable for panel mounting by means of a bezel kit,reference 03363764. Panel hole: Ø 31 mm; Panel thickness: 8 mm maximum

ø 41

124

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

G1/4

This valve is suitable for panel mounting and includes a nut and washer. Panel hole: Ø 21 mm

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

X3067802, X3067702 5/2 Lever operated valve

X3363802, X3367802, X3363702, X3367702 5/3 Three position lever operated valves

VALVES

134

15 15

G1/4

12 3

11,5

2 1

12 3

11,5

23,5

These valves are suitable for panel mounting by means of a bezel kit, reference 03363764. Panel hole: Ø 31 mm Panel thickness: 8 mm maximum

X3068202 5/2 Pedal operated spring return valve X3068402 5/2 Pedal operated pedal return valve 187

5°

100

6,5

A foot guard is available for this valve, reference 03048060.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

G 1/4

125

Model X3067702 features a positive detent in each position. Both models are suitable for panel mounting by means of a bezel kit, reference 03363764. Panel hole: Ø 31 mm Panel thickness: 8 mm maximum

23,5

11,5 ø 6,5

ø 6,5

11,5

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE

VALVES

03029502, 03029532 3/2 Adapter valve

X3039502 5/2 Adapter valve

Super X 3/2, 5/2 and 5/3, G1/8, G1/4 and 6 mm PIF

5,4

‘14’ ‘5’

'1'

‘4’

‘2’ ‘1’

‘12’

'10'

'2'

ø 5,4

'3'

'12'

60,5 10 20

‘3’

ø 24

G1/8

This valve is for use with standard electrical style operating heads. For details see below.

≤5

Button (mushroom) operated, spring return

≤5

V11783-C12 Key operated key return

M22 x 1,5

29,5

≤5

37 M22 x 1,5

M22 x 1,5

V11783-C10 Rotary knob operated rotary knob return ≤5

V11783-C07 (red) V11783-C08 (green)

29,5

≤5

V11783-C04 (pink) V11783-C05 (green) V11783-C06 (black) Button (shrouded) operated, spring return

M22 x 1,5

Online at store.norgren.com

V11783-C01 (pink) V11783-C02 (green) V11783-C03 (black) Button (palm) operated, spring return

M22 x 1,5

126

Operating heads for use with G1/8, 3/2 and 5/2 Adaptor valves Panel hole: Ø 22,5 mm Panel thickness: 6 mm maximum

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

SOLENOID ACTUATED 32 MM POPPET VALVES

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

• Extensive range of power and orifice size options • Compact installation • Removeable coil

Technical Data

Materials

Medium: Compressed air, filtered, lubricated and non-lubricated

Coil: Glass reinforced PA

Operating pressure: Maximum 16 bar. See individual details

• Standard exhaust diffuser

Ambient temperature: -20°C … +50°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

VALVES

• In-line and sub-base mounted

Armature: Stainless iron Tube & spring: Stainless steel Base: Zinc alloy (G1/8) brass (G1/4), glass reinforced polyester (interface) Seals: NBR (FPM)

Dimensions 3 32

1 32

12,7 12,7

1 2

72,5

37,5

2 40

1 32

127

1 50

Model

Actuation

Port size

Flow (l/min)

Operating pressure (bar)

Dimension No.

Straight fitting

Elbow fitting

Basic plug

V05X286M-B63*A

2/2 NC

Interface

150

0 … 16

–

M/P15737

V04A286M-B62*A

2/2 NC

G1/8

190

0 … 10

C02250618

C02470618

M/P15737

V04B286M-B42*A

2/2 NC

G1/4

190

0 … 10

C02250828

C02470828

M/P15737

V05B286N-B43*A

2/2 NC

G1/4

260

0 … 13

C02250828

C02470828

M/P15737

V04X386L-B62*A

3/2 NO

Interface

0 … 10

–

M/P15737

V04A386L-B62*A

3/2 NO

G1/8

120

0 … 10

C02250618

C02470618

M/P15737

V04X486L-B62*A

3/2 NC

Interface

0 … 10

–

M/P15737

V05X486M-B63*A

3/2 NC

Interface

150

0 … 10

–

M/P15737

V04A486L-B62*A

3/2 NC

G1/8

120

0 … 10

C02250618

C02470618

M/P15737

V05A486M-B63*A

3/2 NC

G1/8

190

0 … 10

C02250618

C02470618

M/P15737

* Insert voltage codes from table below. Order connector plugs separately.

For interface valves use manifold M/P35598/#. # = number of stations from 1 … 6. For more details, see full datasheet.

Voltage codes and spare coils Voltage

Code

Coil V04

V05

12 V d.c.

V04X286A-Q1222

–

24 V d.c.

V04X286A-Q1223

V05X286A-Q1233

110 … 120 V 50/60 Hz

V04X286A-Q1228

V05X286A-Q1238

220 … 240 V 50/60 Hz

V04X286A-Q1229

V05X286A-Q1239

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Accessories

Models

SOLENOID ACTUATED 32 MM POPPET VALVES

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

VALVES

Option selector V0˙˙˙86˙-B˙˙˙˙ Series

Substitute

Connector

V03

Without (standard)

V04

With

V05

Voltage

Port size/base

Substitute A B Substitute

Substitute

12 V d.c. (V04 & V05 only)

Interface

24 V d.c. (V03, V04 & V05)

G1/8

24 V a.c. (V04 & V05 only)

G1/4

48 V d.c. (V04 & V05 only)

Substitute

48 V a.c. (V04 & V05 only)

Function 2/2 NC

110 V d.c. (V04 & V05 only)

3/2 NO

110 V a.c. (V04 & V05 only)

3/2 NC

240 V a.c. (V04 & V05 only)

Orifice (mm)

Substitute

Power

9 Substitute

1 (Interface only)

1 W (V03)

1,5 (Interface and G1/8 only)

4,5 W (V04)

2 (all versions)

9 W (V05)

2,5 (all versions)

Manual override

3 (G1/4 only)

Without Push button (push to operate spring return) Lever Push to turn (Screwdriver)

3 Substitute 1 3* 4 6*

128

Not available for G1/4 Note: This table should be used for identification purposes only and not to build up model variants.

Online at store.norgren.com For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

SOLENOID ACTUATED 32 MM POPPET VALVES

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

• Compact, fully encapsulated assembly • 2/2 or 3/2 function with collected exhaust • Maximum protection from vibration and impact damage • Maximum environmental protection • Wide range of temperature • Shock and vibration resistant to EN 61373, Category 1, class A and B

Technical Data

Materials

Medium: Compressed air, filtered, lubricated and non-lubricated Light oil, water and other non corrosive liquids and gases

Valve base: Moulded PBT

Operation: Poppet valve, directly actuated with spring return

Armature: Stainless iron

VALVES

• Direct integration on to a manifold

Coil: Glass reinforced PET (UL94 V0)

Stem tube: Stainless steel

Operating pressure: 0 ... 12 bar (0 ... 174 psi)

Springs: Stainless steel

Flow: See table

+80°C (+176°F)

Seals: NBR

Mounting: Direct integration on to a manifold

EN 61373

Environmental: 200 hours salt spray

-40°C (-40°F)

Life expectancy: Typically in excess of 20 million cycles Ambient temperature: Supply: -40°C ... +90°C Ambient: -40°C ... +80°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

129

Solenoid operators 12, 24, 110 Volts

Power consumption

3,4 or 4,7 Watt

Voltage tolerance

± 25% of nominal

Duty cycle

100% ED

Opening/closing time

10 ... 20/5 ... 10 ms

Protection Class

IP 65 (DIN 40 050) with cable clamp, IP69 with DIN connector

Coil

Fully encapsulated

Electrical Connections

Flying leads (length approx. 520 mm)

Symbol

Model

Power (W)

Orifuce (mm)

Flow (l/min)

Operating pressure (bar)

Weight (g)

VSD2CAD4-K19*K

3,4

VSD2CAD4-K1V*K V-22C-E-F

4,7

VSD2CAG4-K1V*K

4,7

1,6

VSD7CAD4-K19*K

3,4

VSD7CAG4-K19*K

3,4

1,6

VSD7CAD4-K1V*K

4,7

VSD7CAG4-K1V*K

4,7

1,6

2 1

V-32C-E-F V-22C-EH-F 11 3

* = Insert voltage22code, see below

V-32C-EH-F V-22C-ER-F

11 3 2

V-32C-ER-F 1

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Nominal voltages

SOLENOID ACTUATED 32 MM POPPET VALVES

Excel 32, V04 & V05 2/2 and 3/2, NO/NC G1/8, G1/4

VALVES

Option selector VSD˙CA˙4-K1˙˙˙ Function

Substitute

Electrical connection

2/2 Normaly closed (NC)

Flying leads

3/2 Normaly closed (NC)

Corresponding to DIN 72585-A1-2-1

Substitute K 3

Orifice

Substitute

Voltage

Substitute

1,0 mm

12 V d.c.

1,6 mm

24 V d.c.

3 7

110 V d.c. *1) Power

Substitute

3,4 Watt

4,7 Watt

*1) For DIN connector only

Dimensions

13,3

5,4

19,4

Flying lead type

130

13,3

Delivery

Inlet

Port 2

Inlet

Delivery

Port 3

Not used

Exhaust

Fastering screws not supplied. Use M4 screws and suitable washers.

Ø 27

11,5

21,5

DIN connector type

5,4

5,3

3/2 way

Port 1

Delivery

Inlet

Port 2

Inlet

Delivery

Port 3

Not used

Exhaust

Fastering screws not supplied. Use M4 screws and suitable washers.

Electrical connection corresponding to DIN 72585-A1-2-1, connector not supplied.

Note: Installation drawings available on request!

13,3

19,4

13,3

2/2 way 1

Online at store.norgren.com

16,5

3/2 way

Port 1

Note: Installation drawings available on request!

5,3

2/2 way 1

8 34,5

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

• Field expandable with single add-on stations • Dual spool technology, solenoid pilot actuated - VS18G Glandless spool and sleeve for long life - VS18S Softseal spool for high flow • UL and ATEX • Universal PNP/NPN 24 V d.c. Multipole • To configure and order a Valve Island visit - vi.norgren.com • Conforms to ISO 15407-2 Size 18mm

Technical Data

Materials

Medium: Compressed air, filtered to 40 μm, lubricated or non-lubricated

Body/sub-base: Die-cast aluminium

Flow: Softseal Function l/min 2x2/2 550 2x3/2 600 5/2; 5/3 650 Glandless 5/2; 5/3 550

VALVES

• Integrated Fieldbus

Glandless spool & Sleeve (VS18G): Aluminium, hard anodised, PTFE coated Softseal spool (VS18S): Aluminium with HNBR seals Plastic parts: POM, PA, PPA Mounting sheets/screws: Steel, zinc coated Springs: Stainless steel

Mounting: Sub-base Ports 2+4: G1/8, PIF 8 mm, PIF 6 mm Operating pressure: Maximum pressure 10 bar VS18S models and VS18G solenoid pilot actuated valves with internal pilot supply 16 bar VS18G solenoid pilot actuated valves with external pilot supply

Sandwich plates: Aluminium bar material, PA Electrical contacts: Brass, tin coated PCB: Glass epoxy

Ambient/Media temperature: Ambient:-15°C … +50°C Media: -5°C … +50°C

131

Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Model

Function 2x2/2

Actuation/return

Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18SE11DF313A

Sol/Spring

Internal

2,5 … 10*1)

-0,9 … 10

Push only

24 V d.c. 1,2 W

STU

VS18SE11DF213A

Sol/Spring

Internal

2,5 … 10*1)

-0,9 … 10

Push & turn

24 V d.c. 1,2 W

STT

VS18SE22DF313A

Sol/Spring

External

1,7+ (0,5 x press. port 1) *2)

-0,9 … 10

Push only

24 V d.c. 1,2 W

SWU

VS18SE22DF213A

Sol/Spring

External

1,7+ (0,5 x press. port 1) *2)

-0,9 … 10

Push & turn

24 V d.c. 1,2 W

SWT

VS18SE22DF513A

Sol/Spring

External

1,7+ (0,5 x press. port 1) *2)

-0,9 … 10

Extended, Push only

24 V d.c. 1,2 W

SWE

VS18SF11DF313A

Sol/Spring

Internal

2,5 … 10*1)

-0,9 … 10

Push only

24 V d.c. 1,2 W

SUU

VS18SF11DF213A

Sol/Spring

Internal

2,5 … 10*1)

-0,9 … 10

Push & turn

24 V d.c. 1,2 W

SUT

VS18SF11DF513A

Sol/Spring

Internal

2,5 … 10*1)

-0,9 … 10

Extended, Push only

24 V d.c. 1,2 W

SUE

VS18SF22DF313A

Sol/Spring

External

1,7+ (0,5 x press. port 1) *2)

-0,9 … 10

Push only

24 V d.c. 1,2 W

SXU

VS18SG11DF313A

NO/NC

Sol/Spring

Internal

2,5 … 10 *1)

-0,9 … 10

Push only

24 V d.c. 1,2 W

SVU

VS18SG22DF313A

NO/NC

Sol/Spring

External

1,7+ (0,5 x press. port 1) *2)

-0,9 … 10

Push only

24 V d.c. 1,2 W

SYU

Valve dimensions see page 169. NO = Normally open, NC = Normally closed. *1) Pilot air supply through port 1. *2) Pilot air supply through port 12/14.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Models - 2 x 2/2 Double solenoid actuated softseal valves (flow 550 l/min)

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

VALVES

Models - 2 x 3/2 Double solenoid actuated softseal valves (flow 600 l/min) Model

Function 2x2/2

Actuation/return

Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18SA11DF313A

Sol/Spring

Internal

–

2,5 … 10

Push only

24 V d.c. 1,2 W

VS18SA11DF318A

Sol/Spring

Internal

–

2,5 … 10

Push only

115 V a.c. 1,5 VA

TAU

VS18SA11DF213A

Sol/Spring

Internal

–

2,5 … 10

Push & turn

24 V d.c. 1,2 W

SAT

VS18SA11DF218A

Sol/Spring

Internal

–

2,5 … 10

Push & turn

115 V a.c. 1,5 VA

TAT

VS18SA11DF513A

Sol/Spring

Internal

–

2,5 … 10

Extended, push only

24 V d.c. 1,2 W

SAE

VS18SA22DF313A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push only

24 V d.c. 1,2 W

SDU

VS18SA22DF318A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push only

115 V a.c. 1,5 VA

TDU

VS18SA22DF213A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push & turn

24 V d.c. 1,2 W

SDT

VS18SA22DF513A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Extended, push only

24 V d.c. 1,2 W

SDE

VS18SB11DF313A

Sol/Spring

Internal

–

2,5 … 10

Push only

24 V d.c. 1,2 W

SBU

VS18SB11DF318A

Sol/Spring

Internal

–

2,5 … 10

Push only

115 V a.c. 1,5 VA

TBU

VS18SB11DF213A

Sol/Spring

Internal

–

2,5 … 10

Push & turn

24 V d.c. 1,2 W

SBT

VS18SB22DF313A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push only

24 V d.c. 1,2 W

SEU

VS18SB22DF318A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push only

115 V a.c. 1,5 VA

TEU

VS18SB22DF213A

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push & turn

24 V d.c. 1,2 W

SET

VS18SC11DF313A

NO/NC

Sol/Spring

Internal

–

2,5 … 10

Push only

24 V d.c. 1,2 W

SCU

VS18SC11DF318A

NO/NC

Sol/Spring

Internal

–

2,5 … 10

Push only

115 V a.c. 1,5 VA

TCU

VS18SC11DF213A

NO/NC

Sol/Spring

Internal

–

2,5 … 10

Push & turn

24 V d.c. 1,2 W

SCT

VS18SC11DF218A

NO/NC

Sol/Spring

Internal

–

2,5 … 10

Push & turn

115 V a.c. 1,5 VA

TCT

VS18SC22DF313A

NO/NC

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push only

24 V d.c. 1,2 W

SFU

VS18SC22DF213A

NO/NC

Sol/Spring

External

1,7+(0,35 x op. press.)

0 … 10

Push & turn

24 V d.c. 1,2 W

SFT

132

Valve dimensions see page 169. NO = Normally open, NC = Normally closed.

Online at store.norgren.com

Models - 5/2 Single and double solenoid actuated glandless valves (flow 550 l/min) Model

Actuation/return

Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18G511DF313A

Sol/Sol

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

GJU

VS18G511DF318A

Sol/Sol

Internal

–

2 … 10

Push only

115 V a.c. 1,5 VA

HJU

VS18G511DF213A

Sol/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

GJT

VS18G511DF513A

Sol/Sol

Internal

–

2 … 10

Extended, push only

24 V d.c. 1,2 W

GJE

VS18G522DF313A

Sol/Sol

External

2 … 10

-0,9 … 16

Push only

24 V d.c. 1,2 W

GKU

VS18G522DF213A

Sol/Sol

External

2 … 10

-0,9 … 16

Push & turn

24 V d.c. 1,2 W

GKT

VS18G591DF213A

Sol (Priority)/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

GST

VS18G517DF313A

Sol/Spring

Internal

–

1,6 … 10

Push only

24 V d.c. 1,2 W

GGU

VS18G517DF318A

Sol/Spring

Internal

–

1,6 … 10

Push only

115 V a.c. 1,5 VA

HGU

VS18G517DF213A

Sol/Spring

Internal

–

1,6 … 10

Push & turn

24 V d.c. 1,2 W

GGT

VS18G517DF218A

Sol/Spring

Internal

–

1,6 … 10

Push & turn

115 V a.c. 1,5 VA

HGT

VS18G517DF513A

Sol/Spring

Internal

–

1,6 … 10

Extended, push only

24 V d.c. 1,2 W

GGE

VS18G527DF313A

Sol/Spring

External

1,6 … 10

-0,9 … 16

Push only

24 V d.c. 1,2 W

GHU

VS18G527DF213A

Sol/Spring

External

1,6 … 10

-0,9 … 16

Push & turn

24 V d.c. 1,2 W

GHT

Valve dimensions see page 169.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

Model

Actuation/return

Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18S511DF313A

Sol/Sol

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

SJU

VS18S511DF318A

Sol/Sol

Internal

–

2 … 10

Push only

115 V a.c. 1,5 VA

TJU

VS18S511DF213A

Sol/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

SJT

VS18S511DF218A

Sol/Sol

Internal

–

2 … 10

Push & turn

115 V a.c. 1,5 VA

TJT

VS18S511DF513A

Sol/Sol

Internal

–

2 … 10

Extended, push only

24 V d.c. 1,2 W

SJE

VS18S522DF313A

Sol/Sol

External

2 … 10

-0,9 … 10

Push only

24 V d.c. 1,2 W

SKU

VS18S522DF213A

Sol/Sol

External

2 … 10

-0,9 … 10

Push & turn

24 V d.c. 1,2 W

SKT

VS18S517DF313A

Sol/Spring

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

SGU

VS18S517DF318A

Sol/Spring

Internal

–

2 … 10

Push only

115 V a.c. 1,5 VA

TGU

VS18S517DF213A

Sol/Spring

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

SGT

VS18S517DF218A

Sol/Spring

Internal

–

2 … 10

Push & turn

115 V a.c. 1,5 VA

TGT

VS18S517DF513A

Sol/Spring

Internal

–

2 … 10

Extended, push only

24 V d.c. 1,2 W

SGE

VS18S527DF313A

Sol/Spring

External

2 … 10

-0,9 … 10

Push only

24 V d.c. 1,2 W

SHU

VS18S527DF318A

Sol/Spring

External

2 … 10

-0,9 … 10

Push only

115 V a.c. 1,5 VA

THU

VS18S527DF213A

Sol/Spring

External

2 … 10

-0,9 … 10

Push & turn

24 V d.c. 1,2 W

SHT

VS18S527DF218A

Sol/Spring

External

2 … 10

-0,9 … 10

Push & turn

115 V a.c. 1,5 VA

THT

VS18S527DF513A

Sol/Spring

External

2 … 10

-0,9 … 10

Extended, push only

24 V d.c. 1,2 W

SHE

VALVES

Models - 5/2 Single and double solenoid actuated softseal valves (flow 650 l/min)

Models - 5/3 Double solenoid actuated glandless valves (flow 550 l/min) Function 2x2/2

Actuation/return Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18G611DF313A

APB

Sol/Sol

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

GLU

VS18G611DF318A

APB

Sol/Sol

Internal

–

2 … 10

Push only

111 V a.c. 1,5 VA

HLU

APB

Sol/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

GLT

APB

Sol/Sol

External

2 … 10

-0,9 … 16

Push only

24 V d.c. 1,2 W

GMU

VS18G622DF213A

APB

Sol/Sol

External

2 … 10

-0,9 … 16

Push & turn

24 V d.c. 1,2 W

GMT

VS18G711DF313A

COE

Sol/Sol

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

GQU

VS18G711DF318A

COE

Sol/Sol

Internal

–

2 … 10

Push only

111 V a.c. 1,5 VA

HQU

VS18G711DF213A

COE

Sol/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

GQT

VS18G711DF513A

COE

Sol/Sol

Internal

–

2 … 10

Extended, push only

24 V d.c. 1,2 W

GQE

VS18G722DF313A

COE

Sol/Sol

External

2 … 10

-0,9 … 16

Push only

24 V d.c. 1,2 W

GRU

VS18G722DF318A

COE

Sol/Sol

External

2 … 10

-0,9 … 16

Push only

111 V a.c. 1,5 VA

HRU

VS18G722DF213A

COE

Sol/Sol

External

2 … 10

-0,9 … 16

Push & turn

24 V d.c. 1,2 W

GRT

Models - 5/3 Double solenoid actuated softseal valves (flow 650 l/min) Model

Function 2x2/2

Actuation/return Pilot supply

Pilot pressure (bar)

Operating pressure (bar)

Manual override

Voltage

Short code

VS18S611DF313A

APB

Sol/Sol

Internal

–

2 … 10

Push only

24 V d.c. 1,2 W

SLU

VS18S611DF318A

APB

Sol/Sol

Internal

–

2 … 10

Push only

115 V a.c. 1,5 VA

HLU

VS18S611DF213A

APB

Sol/Sol

Internal

–

2 … 10

Push & turn

24 V d.c. 1,2 W

SLT

VS18S611DF218A

APB

Sol/Sol

Internal

–

2 … 10

Push & turn

115 V a.c. 1,5 VA

HLT

VS18S611DF513A

APB

Sol/Sol

Internal

–

2 … 10

Extended, push only

24 V d.c. 1,2 W

SLE

VS18S622DF313A

APB

Sol/Sol

External

2 … 10

-0,9 … 10

Push only

24 V d.c. 1,2 W

SMU

VS18S622DF213A

APB

Sol/Sol

External

2 … 10

-0,9 … 10

Push & turn

24 V c.c. 1,2 W

SMT

VS18S711DF313A

COE

Sol/Sol

Internal

–

2,5 … 10

Push only

24 V d.c. 1,2 W

SQU

VS18S711DF318A

COE

Sol/Sol

Internal

–

2,5 … 10

Push only

115 V a.c. 1,5 VA

HQU

VS18S711DF213A

COE

Sol/Sol

Internal

–

2,5 … 10

Push & turn

24 V d.c. 1,2 W

SQT

VS18S722DF313A

COE

Sol/Sol

External

2,5 … 10

-0,9 … 10

Push only

24 V d.c. 1,2 W

SRU

VS18S722DF513A

COE

Sol/Sol

External

2,5 … 10

-0,9 … 10

Extended, push only

24 V d.c. 1,2 W

SRE

Valve dimensions see page 169. APB = All Ports Blocked, COE = Centre Open Exhaust.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

VS18G611DF213A VS18G622DF313A

133

Model

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

VALVES

Electrical details for solenoid operators Voltage tolerances

Protection classification (IP Code): All VS18 valve islands fulfill IP65 and NEMA4 ratings.

(24 V d.c) +/- 10% (115 V a.c) -10%/+15%

Power supply and precautions: AII VS18 24 V d.c products are designed to be used with a protective extra low voltage (PELV) power supply. All VS26 115 V a.c products correspond to the protection class I. Connection of the protective earth (PE) ground is required.

Rating

100% Continuous duty

Inlet orifice

0,8 mm

Indication

LED green

Surge surpression

Transil diode

Materials

PPS (body), FKM and NBR (seal)

Note: For alternative voltage and voltage tolerances please contact us.

UL approval: Recognized to UL 429 for Electrically Operated Valves. ATEX: The 24 V d.c Multipole and Fieldbus valve islands fulfils the requirement of the standard 94/9/EC for intended use in hazardous locations. Ex nA IIC T4 Gc X Ex tC IIIC T135°C Dc -15°C < tamb < 50°C Equipment group, category, type of protection: The Declaration of Conformity of the valve islands was conducted by Norgren GmbH, D-70731 Fellbach. Please review all ATEX data and notes in the maintenance and instruction booklet to eliminate any risks, allowing for safe function of the valve islands.

134

Option selector VS18˙˙˙˙DF˙˙˙A Spool technology

Substitute

Voltage

Online at store.norgren.com

Glandless spool & sleeve

24 V d.c 1,2 W (±10%)

Softseal spool

115 V a.c 1,5 VA (-10/+15%)

Guiding systems

Substitute

2x3/2 Normally closed *1)

2x3/2 Normally open *1)

2x3/2 Normally open/Normally closed *1)

2x2/2 Normally closed *1)

2x2/2 Normally open *1)

2x2/2 Normally open/Normally closed *1)

5/2

5/3 All ports blocked

5/3 Centre open exhaust

Substitute 13 18

12 V d.c. 1,2 W (±10%)

availabe on request

12 V d.c. 1,5 W (-17/+25%)

availabe on request

24 V d.c 1,5 W (-17/+25%)

availabe on request

Manual override *3)

Substitute

Push & turn

Push only

Extended, push only Actuation/Pilot supply

5 Substitute

Solenoid/Spring Internal pilot supply

Solenoid/Spring External pilot supply

Solenoid/Solenoid Internal pilot supply

Solenoid/Solenoid External pilot supply

Solenoid priority side 14/Solenoid (5/2 only) Internal pilot supply *2)

Solenoid priority side 14/Solenoid (5/2 only) External pilot supply *2)

*2) Available with glandless spool & sleeve only (VS18G) *3) Option “without manual override” available on request.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

DIN EN 50 022 rail (1 m)

DIN-rail mounting kit

Blanking disc to modular sub-base

Manual override set-up kit

Spare valve identification labels *1)

Blanking plug for base connector hole *2)

V10009-C00 (35 x 7,5 mm)

V70531-KA0

VS1872405-KF00 (Ports 1, 3, 5)

VS2672906-KG00

VS2672905-KG00 (10 pcs.)

VS2672914-KG00

–

VS1872406-KF00 (Port 12/14)

–

VALVES

Accessories

*1) When purchasing assembled valve islands from Norgren, valve identification labels are already included. *2) When V40/V41 valves are fitted on VS18 bases.

Base accessories Intermediate supply/exhaust module

Blanking plate

VS1872402-AF00 (G1/8)

VS1872404-KF00

VS1872402-PF00 (NPTF 1/8)

–

135

Sandwich plates Single pressure regulator plate

Double pressure regulator plate

Flow regulator plate

Sandwich plate with additional pressure port 1

Single valve shut-off plate

VS1872400-KF40 (Ports 2+4)

VS1872401-KF00 (Ports 3+5)

VS1872428-KFG00 (G1/8)

VS1872403-KF00 (Port *1)

–

VS1872400-KF30 (Port 4)

–

Sub-bases and end plates Single station sub-base

Double station modular sub-base

Page 170

Page 171 for dimensions.

Single station modular sub-base

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

End plate kit

Online at store.norgren.com

VS1872400-KF10 (Port *1) VS1872400-KF20 (Port *2)

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

VALVES

Multipole options Connector type

Voltage

No. of stations

Max. no. solenoids

D-Sub 9-pin

24 V d.c.

02/03/04

D-Sub 15-pin

24 V d.c.

02/03/04/05/06/07

D-Sub 25-pin

24 V d.c.

02/03/04/05/06/07/08/09/10/11/12

D-Sub 44-pin

24 V d.c.

08/09/10/11/12/13/14/15/16/17/18/19/20

M23 19-pin

115 V a.c., 24 V d.c.

02/03/04/05/06/07/08

NPTF1 Conduit entry with terminals

115 V a.c., 24 V d.c.

02/03/04/05/06/07/08/09/10/11/12

For valve islands with 17 … 20 valve stations, please contact our customer service. For details of single parts see pages 171 … 173.

Multipole accessories Cable length

D-Sub connector 9-pin IP65 *1)

D-Sub connector 15-pin IP65 *1)

D-Sub connector 25-pin IP65 *1)

D-Sub connector 44-pin IP65 *1)

M23 connector 19-pin IP65 *1)

VS2672910-KG00

VS2672915-KG00

V11569-E01

V11570-E01

VS2672943-KG00

VS2672911-KG00

VS2672916-KG00

V11569-E03

V11570-E03

VS2672944-KG00

VS2672912-KG00

VS2672917-KG00

V11569-E05

V11570-E05

VS2672945-KG00

136

*1) Required for ATEX. For cable length longer than 5 m please contact customer service.

Online at store.norgren.com For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

PLUG-IN MINI ISO VALVE ISLANDS

VS18â&#x20AC;&#x201A; 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

Fieldbus protocol

Fieldbus interface/connector

Profibus DP

Interbus-S

Power connector (Fieldbus and valves)

No. of stations

Max. no. solenoids

1 x D-Sub; 9-pin

M12; 4-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

2 x M12; 5-pin

M12; 4-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

2 x M12; 5-pin

7/85-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

2 x D-Sub; 9-pin

M12; 4-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

AS-Interface-Singleslave

1 x M12; 4-pin

M12; 4-pin

02/03/04

AS-Interface-Doubleslave

1 x M12; 4-pin

M12; 4-pin

04/05/06/07/08

DeviceNet

1 x M12; 5-pin

M12; 4-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

CANopen

1 x M12; 5-pin

M12; 4-pin

04/05/06/07/08/09/10/11/12/13/14/15/16

VALVES

Fieldbus options: Overview

For parts and assembly instructions of Fieldbus components, consult our technical service.

Fieldbus accessories Model

Description

Connection

Cable length

Protection class

V11588-E01

Profibus DP (4-pin, female) Interbus-S (4-pin, female) DeviceNet (4-pin, female) CANopen (4-pin, female)

M12

Wireable

IP65 Required for ATEX

VS2672907-KG00

Profibus DP (5-pin, female)

7/8

Wireable

IP65 Required for ATEX

V11589-E01

DeviceNet (5-pin, female) CANopen (5-pin, female)

M12

Wireable

IP65 Required for ATEX

V11590-E01

Profibus DP, reverse keyway (5-pin, male)

M12

Wireable

IP65 Required for ATEX

V11591-E01

Profibus DP, reverse keyway (5-pin, female)

M12

Wireable

IP65 Required for ATEX

V11654-E01

Profibus DP connector (9-pin, male) with terminating resistor

D-Sub

Wireable

IP40

V11592-E01

Profibus DP terminating resistor (male)

M12

â&#x20AC;&#x201C;

IP65 Required for ATEX

VE1ASCN1-M1200

AS-Interface power or communications (4-pin, female)

M12

Wireable

IP65 Required for ATEX

Fieldbus power connector

137

Communication cable and connector

Online at store.norgren.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

VS18â&#x20AC;&#x201A; 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

VS18*5*7DF*1*A 5/2 Single solenoid pilot valve, mechanical spring return

VS18****DF*1*A 2x2/2, 2x3/2, 5/2 and 5/3 Double solenoid, pilot valve

5,5

52,5

5,5

37,5

52,5

VALVES

Dimensions - Valves

37,5

PLUG-IN MINI ISO VALVE ISLANDS

M3 41 120

12,5

101

1 Manual override

138

Single station sub-base Model

Description

Ports 1, 3 & 5

Ports 12/14 & 82/84

Ports 2 & 4

Connector type

VS1872010-AF00

Single station sub-base for 24 V d.c.

G1/8

M12

85,5

82/84

12/14

24,5

M 12

49,5

17,5

64,5

42,5

79,5 99,5

57 71,5

126,5 36

85,5

Pin assignment (acc. VDMA 24571) Symbol 42

34,5

4,5 17

Online at store.norgren.com

Connector type: M12

4 1

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Pin no.

Function

Not used

Signal for solenoid 12

Common for solenoid 12 and 14

Signal for solenoid 14

PLUG-IN MINI ISO VALVE ISLANDS

VS18â&#x20AC;&#x201A; 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

VALVES

Dimensions - Valve island Contact us for sub-base and end plate kit ordering information 92,5 60,5

96,5

9,5

11,5

21,5

81,5

52,5

72,5 92 109 111 113,5

14,5

132,5

N Number of stations

Electrical connection

Min. no. of valve stations

Max. no. of valve stations

Multipole

AS-Interface

Other Fieldbus protocols

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

40 19,5

14,5

2 62,5

Online at store.norgren.com

N x 19

139

Dimensions for surface mounting: Slot length = 4,3 mm (max. M4 screws). Clamp length = 35,7 mm. Note: Never plug port 82/84. Plugging this port will cause valves to malfunction.

PLUG-IN MINI ISO VALVE ISLANDS

VALVES

Multi pressure configurations

VS18â&#x20AC;&#x201A; 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

Blanking disc

Type

Intermediate supply/exhaust module

Type

VS1872405-KF00

Suitable for ports 1, 3 and/or 5

VS1872402-AF00

G 1/8

Dual pressure

Pressure 1

Pressure 2

Pressure 3

Multi pressure

Pressure 4

140

Online at store.norgren.com

Pressure 1

Pressure 2

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

PLUG-IN MINI ISO VALVE ISLANDS

VS18 2 x 2/2, 2 x 3/2, 5/2 or 5/3, size 18 mm

Model

Ports 2 & 4

Description

VS1872004-AFF0

G1/8

Add-on station for D-Sub connectors and Fieldbus

VS1872004-6FF0

PIF6 mm

Add-on station for D-Sub connectors and Fieldbus

VS1872004-8FF0

PIF8 mm

Add-on station for D-Sub connectors and Fieldbus

VS1872005-AFF0

G1/8

Add-on station for Conduit entry and M23 connector

VS1872005-6FF0

PIF6 mm

Add-on station for Conduit entry and M23 connector

VS1872005-8FF0

PIF8 mm

Add-on station for Conduit entry and M23 connector

VALVES

A – Single add-on stations including PCB, sub-base, gasket and screws

Valves and accessories to be ordered separately, see page 166.

Step 1 12

141

 Torque = 0,8 … 0,9 Nm Screwdriver speed = max. 1100 r.p.m

 Torque = 1,1 … 1,5 Nm Screwdriver speed = max. 1100 r.p.m For detailed assembly instructions, please see maintenance & instruction booklet

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

Step 2

ROTARY LEVER VALVE¶ VHLA Series, 4/2 and 4/3 3/2

VALVES

• Port size: G 1/4 ... G 1/2 • Aluminium die-cast design suitable for heavy duty applications • Detented centre position • High flow rates

Technical Data

Materials

Medium: Compressed air, filtered, lubricated or non-lubricated

Body and cover: Aluminium alloy Lever rod seat: Zinc alloy

Port size: G1/4, G3/8 and G1/2

• Easy to grasp and rotate lever • Panel mounting option

Lever rod: Carbon steel

Operating pressure: 0 ... 9,7 bar (0 ... 140 psi)

Lever: POM

Flow: 400 ... 3100 l/min Ambient/Media temperature: -5ºC ... +60°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Other versions on request: NPT, G1/8, G3/4 and bottom port versions available on request Ambient/Media temperature: Ambient:-15°C … +50°C Media: -5°C … +50°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

142

Symbol

2 3

Online at store.norgren.com

Model

Function

Flow (l/min)

Port size

Weight (kg)

Drawing No.

VHLA202-02G

4/2

400

G1/4

0,28

VHLA302-03G

4/2

1100

G3/8

0,42

VHLA402-04G

4/2

3100

G1/2

1,1

VHLA200-02G

4/3 APB

400

G1/4

0,28

VHLA300-03G

4/3 APB

1100

G3/8

0,42

VHLA400-04G

4/3 APB

3100

G1/2

1,1

VHLA201-02G

4/3 COE

400

G1/4

0,28

VHLA301-03G

4/3 COE

1100

G3/8

0,42

VHLA401-04G

4/3 COE

3100

G1/2

1,1

Caution: These valves are not leak free, care should be taken with safety critical applications and where an APB valve is used to hold an actuator in a mid position. Installation: It is recommended that air pressure is applied only at port 1, otherwise leakage may occur - (ie. reverse porting is not recommended). It is recommended that a silencer is fitted in the exhaust port, particularly in applications where dust is present.

Option selector VHLA˙0˙-0˙G Body size

Substitute

Port size

Substitute

1/4" (400 l/min)

1/4

3/8" (1100 l/min)

3/8

1/2" (3100 l/min)

1/2

Function

Substitute

4/3 way valve, APB

4/3 way valve, COE

4/2 way valve

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

ROTARY LEVER VALVE

VHLA Series, 4/2 and 4/3 3/2

Valve series

Panel mount nut

VHLA20..

VHLA-200N

VHLA30..

VHLA-300N

VHLA40..

VHLA-400N

VALVES

Accessories

Dimensions Step 1

M40 x 1,5

Step 2 40

ø3

4 A

1 P

45°

M50 x 1,5

~95 ø3 ~124

1 P

4 A

106 17

ANB

1 All ports G1/4 2 All ports G3/8 3 All ports G1/2

~111 ø 6,5

45°

102

Panel mount nut KW

Model

Weight

VHLA-200N

M33x1,5

0,50 kg

VHLA-300N

M40x1,5

0,75 kg

VHLA-400N

M50x1,5

1,00 kg

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

4 Step 3

13,5

45°

ø7

3 4

143

1 P

~111

ø 5,5

~106

15 56 27

11,5

73,5

~88

ø3

M33 x 1,5 31

~95

~103

LNG 2/2 WAY PISTON VALVES 1406076.4280.02400, 1406076.9356.02400 3/2

VALVES

• DN 8, 3/8” (NPT) • High flow rate • Damped operation • Functional compact design • Explosion proof solenoid:

x II 2G Ex emb IIC T4 Gb x II 2D Ex tb IIIC T130°C Db IP66 with cable gland

Technical Data

Materials

Medium: Liquid natural gas, oxygen, nitrogen

Body: Stainless steel (1.4307)

Switching function: Normally closed

Internal parts: Stainless steel, PTFE

Mounting position: Solenoid vertical on top Flow direction: Determined Port size: 3/8 NPT Operating pressure: See table Leak tightness: DIN EN 12266-1 Leakage rate “E” Fluid temperature: -200ºC ... +50°C Ambient temperature: Solenoid 4280: -40ºC ... +50°C Solenoid 9356: -20ºC ... +40°C

144 Symbol

Model

Online at store.norgren.com

(mm)

Port size

Orifice

Valve length (mm)

Flow kv value *1) (m3/h)

Operating pressure *2) (bar)

Weight (kg)

1406076.4280.02400

3/8 NPT

1,1

0,8 ... 40

1,5

1406076.9356.02400

3/8 NPT

1,1

0,8 ... 100

1,4

P *1) Cv-value (US) ≈ kv value x 1,2 *2) For gases and liquid fluids up to 25 mm2/s (cSt) Remark: Conductive residual voltage <10 mA in OFF position; voltage range +10/-30%

Option selector 1406076.˙˙˙˙.02400 Solenoid options Operating pressure 0,8 ... 40 bar (11,6 ... 580 psi) Ambient temperature -40ºC ... +50°C Operating pressure 0,8 ... 100 bar (11,6 ... 1450 psi) Ambient temperature -20ºC ... +40°C

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Substitute 4280

9356

LNG 2/2 WAY PISTON VALVES

1406076.4280.02400, 1406076.9356.02400 3/2

VALVES

Dimensions Solenoid 4280 107

o 57,5

NPT 3/8

12,5

ø 59

M8x15

A 145

min.10,5 56

Solenoid 9356

29,5

47 x 55

o 59

NPT 3/8

110

M8x15

A 10,5 56

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

NATURAL GAS SHUT OFF VALVE – ECE-R110 APPROVED 85410/85430 2/2

VALVES

• Port size: G3/8 ... 1/2; 3/8 ... 1/2 NPT • Orifice: DN 10 ... 12 • Suitable for natural gas (NG) • With ECE-R 110 approval

Technical Data

Materials

Medium: Natural gas (NG) in gaseous phase

Body: Brass (CW617N)

Switching function: Normally closed

Cover: Brass (CW617N)

Operation: Indirectly solenoid actuated

Cover seal: FPM

Mounting position: Optional, preferably solenoid vertical on top

Seat seal: FPM Internal parts: 1.4104, 1.4105, 1.4301, 1.4310, 1.4568, CW614N, PTFE

Flow direction: Determined Port size: G3/8, G1/2, 3/8 NPT, 1/2 NPT

For contaminated fluids insertion of a strainer is recommended

Operating pressure: 0.5 ... 16 bar (7,25 ... 232 psi) Fluid temperature: -40ºC ... +90°C Ambient temperature: -40ºC ... +120°C

146

Symbol

Model

Online at store.norgren.com

Port size

Orifice

Operating pressure *2) (bar)

(psi)

Flow kv value *1) (m3/h)

Weight (kg)

8541100.3746.xxxxx

G3/8

0.5 ... 16

7.25 ... 232

3,4

0,84

8543100.3746.xxxxx

3/8 NPT

0.5 ... 16

7.25 ... 232

3,4

0,84

8541200.3746.xxxxx

G1/2

0.5 ... 16

7.25 ... 232

4,4

0,86

8543200.3746.xxxxx

1/2 NPT

0.5 ... 16

7.25 ... 232

4,4

0,86

xxxxx Please insert voltage and frequency codes *1) Cv-value (US) ≈ kv-Wert x 1,2 *2) For gases and liquid fluids up to 25 mm2/s (cSt)

Option selector 854˙˙˙˙.˙˙˙˙.˙˙˙.˙˙ Thread form

Substitute

Frequenz

ISO G

See table frequency codes

NPT

Spannung

Port size

Substitute

xxx

See Voltage codes Solenoid options

Solenoid in V a.c.

3746

Substitute

Solenoid in V d.c.

3745

1/2 Normally closed (NC) without ECE-R110

Electrical details for all solenoid systems

Voltage and Frequency Solenoid 3746 Code Frequency

Substitute

Standard solenoid systems Code Voltage

xx Substitute

3/8 Valve options

Substitute

Voltage

Frequency

Voltage range

+33% / -25%

Power consumption

Duty cycle

100% ED

Inrush

Holding

Protection class

IP 6K9K (ISO 20653) Terminals IP00

Socket

ISO15170-A1-2.3-Ag/K3

12 V DC

10 W

24 V DC

10 W

At operating state temperature (d.c.) the input power of a coil decreases up due to physical reasons.

Further versions on request! Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

NATURAL GAS SHUT OFF VALVE – ECE-R110 APPROVED

85410/85430 2/2

G3/8 ... 1/2 3/8 ... 1/2 NPT

1501 1502 701 705 9901 400 702 1502

105

703

104

No.

Description

101

Valve body

102

Valve cover

103

Valve piston

104

Straight pin

105

Pressure spring

106

O-ring

107

O-ring

400

Solenoid

701

Core tube

702

Core

703

O-ring

705

Pressure spring

1501

Hexagon screw

1502

O-ring

VALVES

Dimensions

706

103

102

106

107

101

147

70 25,3

Online at store.norgren.com

øB L

Typ

Port size R

øB

8541100.374x.xxxxx

G3/8

106.5

8543100.374x.xxxxx

3/8 NPT

106.5

10.5

8541200.374x.xxxxx

G1/2

108.9

8543200.374x.xxxxx

1/2 NPT

108.9

13.5

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

LIFT AXLE CONTROL MODULE 5040 Series

VALVES

• Designed for the heavy duty truck and trailer industry

Technical Data

Materials

• Includes two industry-proven brake-style relay valves integrated into a single unit for compactness and ease of installation

Operating pressure: 30 … 120 psi

Cast Aluminium body with thermoplastic pistons and low temperature nitrile seals

Operating temperature: -40°C … +87.7°C max.

• Excellent flow capability for rapid axle actuation • Optional control solenoid for electric control

Models 148

Model

Valve Type

Electrical Connection

5040-111-01C

Air Actuation

N/A

5040-211-01C

N/O Solenoid

Metri-Pack 150 Series 2-way connector

5040-311-01C

N/C Solenoid

Metri-Pack 150 Series 2-way connector

Online at store.norgren.com

Option selector 5040-˙1 1-01C Valve Type

Substitute

Air Actuation

N/O Solenoid

N/C Solenoid

Check Valve

Substitute

Check Valve Gage Port ‘A’ side gage port

1 Substitute 1

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

LIFT AXLE CONTROL MODULE

5040 Series

VALVES

Dimensions 5040-111-01C 3.0 1.5 2 x 3/8-18 NPTF8

1/8-27 NPTF

3° REF

ø .56

2 x 1/2-14 NPTF

5.167

1.638

1.962

1.712

VENT

“A” SIDE GAGE PORT LOCATION 1/8-27 NPTF

0.975 2.507

4.614

2.023

1/2-14 NPT 3.600

5.807

4.125

149

1.820

Online at store.norgren.com

5040-111-01C MACHINE CRIMPED METRI-PACK 150 SERIES CONNECTOR PACKARD P/N 12052644 5.807 REF 1/8-27 NPTF

2.507 REF

3° REF 2X 1/2-14 NPTF

5.167 REF

1.638

0.975

2X 3/8-18 NPTF

1.712

VENT

2.023

1/8-27 NPTF

1.963

1/2-14 NPTF

3.600

4.125 3.0 REF 1.5 REF

Ø 0.56

4.600 REF

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

LIFT AXLE CONTROL MODULE

VALVES

5040-311-01C

5040 Series

3.0 REF Ø 0.56

1/8-27 NPTF

3° REF

1.5 REF

2X 1/2-14 NPTF

5.167 REF

4.614 REF

1/2-14 NPTF

1.638

0.975 2.507 REF

1/8-27 NPTF

1.963

1.712

VENT

2X 3/8-18 NPTF

2.023

5.807

4.125

3.600

150

MACHINE CRIMPED METRI-PACK 150 SERIES CONNECTOR PACKARD P/N 12052644

Online at store.norgren.com For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

RAPID DUMP VALVE

4111 Series

Technical Data

Materials

• 2 delivery ports

Rated PSI: 90 … 120 psi 6.4 … 8.5 bar

Die cast Zinc

• Chassis-mounted on heavyduty highway vehicles with air-ride suspensions

Port size: 1/8"-27

VALVES

• 3-way, pilot-operated, normally open valve

Thread Type: PTF

Dimensions

VALVE CAN BE MOUNTED ON EITHER SURFACE

1-3/4

1-1/2

2-7/16

1/8-27 NPTF INTERNAL THREAD, (ALL PORTS)

1 Ø 0.28 ± 0.02 MOUNTING HOLE TYP. 2 PL

Models Model

Port Size

4111-2

1/8" PTF

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

EXHAUST SHIELD

151

Ø 0.28 ± 0.02 MOUNTING HOLE TYP. 2 PL

DASH VALVES

Series 3281

VALVES

• 3-way air valve • Designed for dashboard operation of truck air system accessories • Engineered for functionality and durability

Technical Data

Materials

Operating pressure: 0 to 150 psi (0 to 10 bar)

Nylon, glass filled Tube O/D: 1/4"

Operating temperature: -20°C to +70°C

• Integral Push-to-Connect fittings (PTC)

Status lighting: Red LED oval only

• Material used meets DOT FMVSS 302 flammability requirements

Dimensions 1.025

1.025

152 0.53

2.16 SECONDARY SUPPLY PORT

Online at store.norgren.com

0.53

PRIMARY SUPPLY PORT

2.16

1.98

SECONDARY SUPPLY PORT DELIVERY

TERMINAL A TERMINAL B TERMINAL C TERMINAL D

1.98

PRIMARY SUPPLY PORT

TERMINAL A

DELIVERY

TERMINAL B TERMINAL C TERMINAL D

INTEGRATED CONNECTOR MATES WITH METRI-PACK 150 SERIES CONNECTOR #12045813 WITH FEMALE TERMINALS

Models Model

Description

3281-1

Inter-axle differential lock

3281-2

5th wheel slide

Rocker Symbol

Rocker Text Inter

Model

Description

3281-4

Power take off

Rocker Symbol

Rocker Text P.T.O.

3281-5

Air intake routing

Air

Axle 5th

Intake

Wheel 3281-3

Air suspension dump

SUSP

3281-6

Neutral control

Height

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Neutral Control

REMOVABLE KNOB SEAT VALVE

134-4

Technical Data

• Removable knob

Operating pressure: 0 … 200 psi (0 … 13 bar)

• Designed to operate air seat systems

VALVES

• Controls seat height and lumbar support functions

Actuation: Push: Applies inlet pressure to outlet port Pull: Vents outlet port Leakage: Valve cannot leak to outlet port in OFF position Porting: Outlet port configuration options: 1/8"-27 nptf female thread

Dimensions NUT & WASHER

1-1/8

1.00

153

1-5/32 1/2

1.62 1/8-27 NPTF THDS IN

PUSH

3/8

1-7/16

0.75 5/8-18 UNF THD

OUT

Models Model

Port Size

134-4

1/8 -27 NPTF

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

PULL

PADDLE SEAT CONTROL VALVE 3013-4

VALVES

1-0

• Designed for the control of one seat bag • Paddle style actuation • 3-way valve

Materials

Operating pressure: 0 … 125 psi (0 … 8 bar) 1-25/32

Black Thermoplastic

Actuation: 3-way, dead center, 55°paddle ±5° DEFLATE style actuation

• All plastic components meet FMVSS 302 flammability requirements • 1/4" barb connection

Technical Data

1/4

INFLATE

Assembly: assembly snaps into seat side panel from the outside

5/16Valve

2-3/16±1/16 1-5/8 DELIVERY SEE DETAIL 1

Dimensions 1.610 ±0.010

BRASS BARB ACCEPTS 1/4" DOT TUBE 2PL

SUPPLY R 0.063 MAX.

0.890 ±0.010

154

DETAIL PANEL HOLE SCALE 1

1-0

Online at store.norgren.com

1-25/32 DEFLATE

55° ±5°

INFLATE

1/4 5/16

2-3/16±1/16 1-5/8 DELIVERY SEE DETAIL 1 SUPPLY 1.610 ±0.010

Models

BRASS BARB ACCEPTS 1/4" DOT TUBE 2PL

R 0.063 MAX.

0.890 ±0.010

Model

Barb Connection

3013-4

1/4"

DETAIL PANEL HOLE SCALE 1

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

COMBINATION VALVE

Electric/Pneumatic 3000

VALVES

Technical Data

• Integrated electrical switch for pneumatic and electric control of air seats

Operating pressure: 0 to 200 psi (0 to 13 bar)

• Permanent knob

Actuation: Push: Closes electrical switch. Approved for use with RDH Enterprises # 6400450 12 Vdc compressor or equivalent Pull: OUT port is vented to atmosphere

• Push-To-Connect fittings (PTC)

Tube O/D: 1/4"

Dimensions NUT & WASHER 1/4" BLADE TERMINALS (REF SAE J858a) 1-1/8

155

1.62

1/2

7/16

5/8-18 UNF THD

Models Model

Port Size

3000

1/8 -27 NPTF

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

1-1/4

COMBINATION PADDLE SEAT VALVE Electric/Pneumatic 3013-5

VALVES

Technical Data

• Integrated electrical switch for pneumatic and electric control of air seats

Operating pressure: 0 to 125 psi (0 to 8 bar)

• Paddle style actuation

Actuation: Paddle style

• All plastic components meet FMVSS 302 flammability requirements

1-25/32

Electrical connection: Wire assembly, terminal 1/4" blades

• 1/4" barb connection

1. 0 ± 0.3

1-25/32 55° OFF

DEFLATE

INFLATE 1/4

1. 0 ± 0.3

5/16

Dimensions

2-3/16±1/16 55° OFF

DEFLATE

INFLATE

1-25/32

1-5/8

1/4 5/16

1. 0 ± 0.3 2-3/16±1/16 1-5/8BARBED FITTING, DELIVERY PORT ACCEPTS 3/16 I.D. TUBE (SEAT) DEFLATE

156

SUPPLY PORT BARBED FITTING, ACCEPTS 3/16 I.D. TUBE (COMPRESSOR)

WIRE ASSEMBLY 25 ± 1, 2 PL (-5 ONLY)

55° OFF

INFLATE 1/4

RECEPTACLE

5/16

Online at store.norgren.com

SUPPLY PORT BARBED FITTING, PANEL OPENING ACCEPTS 3/16 I.D. TUBE (COMPRESSOR)

DELIVERY PORT BARBED FITTING, ACCEPTS 3/16 I.D. TUBE (SEAT)

2-3/16±1/16 1-5/8

R .063 max 4PL WIRE ASSEMBLY 25 ± 1, 2 PL (-5 ONLY)

RECEPTACLE

1.610 ± 0.010 TERMINAL 1/4 BLADE (-5 ONLY) SUPPLY PORT BARBED FITTING, ACCEPTS 3/16 I.D. TUBE (COMPRESSOR)

PANEL OPENING R .063 max 4PL 0.890 ± 0.010

WIRE ASSEMBLY 25 ± 1, 2 PL (-5 ONLY)

1.610 ± 0.010

DELIVERY PORT BARBED FITTING, ACCEPTS 3/16 I.D. TUBE (SEAT)

RECEPTACLE

TERMINAL 1/4 BLADE (-5 ONLY) PANEL OPENING 0.890 ± 0.010

R .063 max 4PL

1.610 ± 0.010 TERMINAL 1/4 BLADE (-5 ONLY)

Models Model

Barb Connection

3013-5

1/4"

0.890 ± 0.010

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

TOGGLE-STYLE AIR/ELECTRIC SWITCH 3200-1A

Technical Data

Materials

• Designed for dashboard operation of truck air system accessories

Operating pressure: 0 … 150 psi (0 … 10 bar)

Zytel, Nylon glass filled

• Integral Push-To-Connect fittings (PTC)

Operating temperature: -20°C … +70°C

VALVES

• 3-way valve combined with integral pressure switch

Tube O/D: 1/4" Electrical connection: Two ¼" blade type electrical terminals

Dimensions 1.0 9/16 HEX

+ 0.010 0.430 - 0.005 FLAT ON CLOSED

0.90 60°

OFF OPEN

157

DIRECTIONAL ARROWS DEPICTING IN AND OUT 15/32-32 THREAD

INLET OUTLET

Online at store.norgren.com

1.4

EXHAUST 0.38

Models Model

Tube O/D

Nominal Voltage

3200-1A

1/4”

12Vdc

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

TOGGLE-STYLE AIR SWITCH 3202-1A

VALVES

• 3-way air valve • Designed for dashboard operation of truck air system accessories • Heavy-duty switch

Technical Data

Materials

Operating pressure: 0 … 150 psi (0 … 10 bar)

Zytel, Nylon glass filled

Operating temperature: -20°C … +70°C Tube O/D: 1/4"

• Integral Push-To-Connect fittings (PTC)

Dimensions 1.0

+ 0.010 0.430 - 0.005 FLAT

9/16 HEX

60° ±5°

158

DIRECTION ARROWS DEPICTING IN AND OUT

15/32-32 THREAD

Online at store.norgren.com

Models Model

Tube O/D

3202-1A

1/4"

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

OFF

FLIPPER CONTROL VALVE

3220-1

Technical Data

• Designed for dashboard operation of truck air system accessories

Operating pressure: 0 … 150 psi (0 … 10 bar)

• Engineered for functionality and durability

Operating temperature: -20°C … +70°C

• Integral Push-To-Connect fittings (PTC)

VALVES

• 3-way air valve combined with integral pressure switch

Tube O/D: 1/4" Electrical connection: Two ¼" blade type electrical terminals

Dimensions 10-24 UNC THREADS TYP 2 PL

EXHAUST REGION 2 PL

INLET WITH PTC FITTING

2-1/16

0.58

1.51

3/8

159

OUTLET WITH PTC FITTING

1.50

AIR ELECTRICAL CLOSED ON

0.40

1.95

INLET CONNECTED TO OUTLET

0.25

75° ±3

1.00

0.032

17/32

1-13/32

0.18

Models Model

Tube O/D

Nominal Voltage

3220-1

1/4”

12V

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

AIR ELECTRICAL OFF OPEN

INLET BLOCKED OUTLET CONNECTED TO EXHAUST

Online at store.norgren.com

R1.70± 0.02

FLIPPER CONTROL VALVE 3222-1

VALVES

• 3-way air valve • Designed for dashboard operation of truck air system accessories • Integral Push-To-Connect fittings (PTC)

Technical Data Operating pressure: 0 … 150 psi (0 … 10 bar) Operating temperature: -20°C … +70°C Tube O/D: 1/4"

Dimensions EXHAUST REGION 2 PL

10-24 UNC THREADS TYP 2 PL

INLET WITH PTC FITTING

2-1/16

0.58 REF

1.51

3/8

160

OUTLET WITH PTC FITTING

1.50

AIR ON

0.40

1.95

INLET CONNECTED TO OUTLET

0.25

Online at store.norgren.com

YELLOW DOT APPROX. 1/8 DIA.

R1.70± 0.02 75° ±3

BOTTOM VIEW OF VALVE AS TYPICALLY INSTALLED

Models Model

Tube O/D

3222-1

1/4"

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

0.18

AIR OFF

INLET BLOCKED OUTLET CONNECTED TO EXHAUST

PRESSURE PROTECTION VALVES (PPV) 223 Series

Technical Data

• Protects the integrity of the air supply

Operating pressure: 0 to 150 psi 0 to 10 bar

• Convenient in tank mounting • Variety of closing pressure options to suit application

VALVES

• Designed to isolate vehicle air systems in case of leakage

Material: Zamak 3 Operating temperature: -40°C to +93°C max.

Dimensions 2.00

2.00

SPRAY CAP SPRAY CAP SPRAY CAP

2.00

SPRAY CAP

7/8 WRENCH FLAT 7/8 WRENCH FLAT

2.498 REF

1.00 REF

2.498 REF

0.62

2.498 REF 1.00 REF

2.498 REF

0.62 0.62

0.62

OUTLET 3/8" NPT THD. TY, 2 PL

OUTLET 3/8" NPT THD. TY, 2 PL OUTLET OUTLET 3/8" NPT THD. 3/8" NPT THD. TY, 2 PL TY, 2 PL

3/8" NPT THD. COVER

1/2" NPT THD. COVER

3/8" NPT THD. COVER INLET

1/2" NPT THD. COVER

3/8" NPT THD. COVER 3/8" NPT THD. INLET COVER

INLET

1/2" NPT THD. COVER 1/2" NPT THD. COVER INLET

INLET

Models Model

Close Pressure (psi) Close Pressure (psi) Thread

223-355V

3/8" NPT

223-365

3/8" NPT

223-385V

3/8" NPT

223-455V

1/2" PTF

223-485V

1/2" PTF

223-565

1/2" PTF

223-585-2

100

1/2" PTF

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at store.norgren.com

OUTLET 3/8" NPT THD. TY, 2 PL

INLET

7/8 WRENCH FLAT

161

1.00 REF

7/8 WRENCH FLAT

CHECK VALVES

VALVES

• Widely used by leading truck manufacturers around the world today, Norgren check valves are designed for strength and durability

Technical Data

• Single and double check valves are available, with multiple port sizes

Operating pressure: 0 to 250*PSI (0 to 17 bar)

• Incorporating standard Norgren check valve components and proven technology

Operating temperature: -40ºC to 100°C

Medium: Compressed air

*Depending on tubing limitations

Single Check Valves Models

Port 1

Port 2

Port 3

95403701M

1/2" PIF

1/2" NPTF

–

162

Online at store.norgren.com

Double Check Valves Models

Port 1

Port 2

Port 3

AI04000404074

3/8" PIF

AI06000606074

10mm PIF

AI06000648473

3/8" PIF

1/2" NPTF

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

FASTBRAKE QUICK EXHAUST VALVE

4000 Series

Technical Data

• Enhances vehicle performance*

Operating pressure: 10 psi min 0.7 bar

• Durable zinc alloy provides excellent flow characteristics *Requires properly plumbed air system

VALVES

• Helps vehicle OEMs to comply with brake timing regulations

Port size: 1/2" NPT Nipple size: 1/2" PTF male

Dimensions 4000-1

4000-8D

1/2-14 NPT

3.50 REF

2.62 REF

Black shield

3.50 REF

1/2-14 NPT

4000-8D

4000-1

1-1/4" Hex Typ. 2 PL

Models Model

Shield Color

Nipple Side: 1/2" PTF Port Side: 1/2" NPT

4000-1

Black

Trailer

Tractor

4000-8D

Brown

Tractor

Trailer

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

1.50

Online at store.norgren.com

2.62 REF

163

Brown shield

UREA TANK HEATING VALVE CV 85

VALVES

Technical Data

• Hose Tube O.D: 14 mmm • Integrate Design, Robust • Low-weight, easy to be mounted anywhere- New Generation UTHV • Medium: Coolant • Operating pressure: Max. 3 bar (44 psi) • Mounting hole: 2 x M6 threads • Ambient/media temperature: -40°C ... + 120°C • Materials: Aluminium

Function. 2/2, NC

Operating Pressure Range 0 ... 3 bar

Media: Engine Coolant

Supply Vltage: 21V ... 32V

Ambient/media temperature: -40°C ... + 120°C

IP Rating: IP6K9K

Connection fitting: 14mm OD

Mounting Holes: 2 X M6 threads

Kv: 10.38 L/m @1bar delta P Operating pressure: Max. 3 bar (44 psi)

Connection DIN 72585-A3-2.1-K2

Mounting hole: 2 x M6 threads Ambient Temperature Range: -40°C ... 80°C

164

Dimensions DIN 72585 A3-2.1-Sn/K2

Online at store.norgren.com

FLOW DIRECTION 2X 25 Ø16.0

14.00

Ø10.00

2X M6x1 - 6H 9.00

25.0

40.0

12.5

Model

Hose Tube O.D

Flow Factor Kv *1)

Housing Material

Coil Direction

Filter

Weight (Kg)

CV8514000.024.00

10,38

Aluminium

As Flow Direction

Without

0,31

CV8514010.024.00

10,38

Aluminium

90° Angle

Without

0,31

CV8514020.024.00

10,38

Aluminium

180° Angle

Without

0,31

CV8514030.024.00

10,38

Aluminium

270° Angle

Without

0,31

CV8514001.024.00

10,38

Aluminium

As Flow Direction

Inclusive

0,31

CV8514011.024.00

10,38

Aluminium

90° Angle

Inclusive

0,31

CV8514021.024.00

10,38

Aluminium

180° Angle

Inclusive

0,31

CV8514031.024.00

10,38

Aluminium

270° Angle

Inclusive

0,31

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

4 Air Preparation (FRL) Modular assembly Unique plug-in yoke system

Power trainns applicatio

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering air preparation range. If you canâ&#x20AC;&#x2122;t see the option you require please contact us.

A I R P R E P A R A T I ON

Combination filter/ regulator & lubricator BL72, BL73, BL74 G1/4 â&#x20AC;Ś G1/2

Page 168

Pressure regulators R07 G1/8, G1/4

Page 170

166

Online at store.norgren.com

eedd.. r r e e e e n n i i EEnngg . . n n o o i i s s i i PPrreecc

Filter Regulator Power Train Applications 11-113-*** > 3/8” npt inlet, 1/8” npt outlet connections

> Mounting hole: 2 x holes for M6 bolts

> Integrated Design, Robust

> Ambient temperature: -40°C ... + 125°C

> Medium: Compressed air

> Can be used in high vibration locations

> Operating pressure: 0-10 bar inlet

> Typical application is transmission mounted

Technical Data - Characteristics Function

Pressure regulator with integrated filter

Media

Compressed air

Connection fitting

Inlet 3/8” NPT, Outlet 1/8 NPT (various locations)

Outlet Pressure

Various options available, can be preset at factory

Ambient Temperature Range

-40°C ... +125°C

Operating Pressure Range

0 to 10 bar

Mounting location

Suitable for transmission and engine mounting

Mounting holes

2 X clearance holes suitable for M6 bolts

Find out more www.imi-precision.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

Engineering GREAT Solutions

EXCELON MODULAR SYSTEM

Combination filter/regulators and lubricators BL72, BL73, BL74 – G1/4 … G1/2

A I R P R E P A R A T I ON

• Shut off valve for safe isolation of supply

Technical Data

Materials

• General purpose filter removing condensate and particle contamination

Medium: Compressed air only

BL72: Body: Zinc Bowl: Transparent PC Elastomers: CR & NBR

• Regulator ensuring optimum working pressure for economy and safety • Lubricator to deliver a correct level of oil lubrication into the downstream system optimising life expectancy of other products

Maximum inlet pressure: 10 bar

BL73: Body: Die cast aluminium Bowl: Transparent PC Elastomers: CR & NBR

Gauge ports: Rc 1/8 Ambient temperature: -20°C … +50°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

• Sturdy bracket for correct mounting

Pressure range: 0,3 … 10 bar

• Pressure gauge for constant monitoring of output pressure

Note: Outlet pressure can be adjusted in excess of and also less than those listed

BL74: Body: Die cast aluminium Bowl: Transparent PC with steel guard Metal bowl: Die cast aluminium Elastomers: CR & NBR

73* 96** 127*** 192* 216** 246*** #

Dimensions

214* 252** 304***

164* 218** 257***

168

48* 74**

35* 56**

48* 74**

* BL72, ** BL73, *** BL74 # Minimum clearance required to remove bowl

35* 56**

73* 96** 127*** 192* 216** 246*** #

Online at store.norgren.com

214* 252** 304***

164* 218** 257***

Options • Alternative outlet ranges • Alternative port sizes • Element 5μm • Alternative bowl options • Oil fog lubricator

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

EXCELON MODULAR SYSTEM

Combination filter/regulators and lubricators BL72, BL73, BL74 – G1/4 … G1/2

Boxed sets BL72, BL73 and BL74 with shut-off valve Auto drain Model

Manual drain Model

Port size

Tamper resistant kit

Quick fill nipple

Service Kit Auto drain

Manual drain

Bowl

BL72-201GA

BL72-221G

G1/4

4255-51

–

B72G-KITA40R & L72M-KIT

B72G-KITM40R & L72M-KIT

BL73-301G

BL73-321G

G3/8

4455-51

18-011-024

B73G-KITA40R & L73M-KIT

B73G-KITM40R & L73M-KIT

BL74-401G

BL74-421G

G1/2

4355-51

18-011-024

B74G-KITA40R & L74M-KIT

B74G-KITM40R & L74M-KIT

Tamper resistant kit

Quick fill nipple

Auto drain

Manual drain

Boxed sets BL72, BL73 and BL74 with shut-off valve Auto drain Model

Manual drain Model

Port size

A I R P R E P A R A T I ON

Accessories

Models

Bowl

BL72-205GA

BL72-225G

G1/4

4255-51

–

B72G-KITA40R & L72M-KIT

B72G-KITM40R & L72M-KIT

BL73-305G

BL73-325G

G3/8

4455-51

18-011-024

B73G-KITA40R & L73M-KIT

B73G-KITM40R & L73M-KIT

BL74-405G

BL74-425G

G1/2

4355-51

18-011-024

B74G-KITA40R & L74M-KIT

B74G-KITM40R & L74M-KIT

GT= Guarded transparent bowl. T=Transparent bowl.

169

Online at store.norgren.com

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

MINIATURE UNITS, GENERAL PURPOSE Pressure regulator R07 – G1/8, G1/4

A I R P R E P A R A T I ON

• Ported regulators for general purpose pneumatic applications

Technical Data

Materials

• Relieving operation as standard

Medium: Compressed air only

Body: Zinc alloy Bonnet & Knob: Acetal Valve: Brass Seals: NBR

• Non-rising adjusting knob with snap-action lock

Maximum inlet pressure: 20 bar Gauge ports: Rc1/8 Ambient temperature: -34°C … +65°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Pressure range: 0,3 … 7 bar 0,5 … 10 bar Note: Outlet pressure can be adjusted in excess of and also less than those listed

Dimensions

Option selector R07-˙0˙-˙˙˙˙

ø 28

Substitute

75 24

Thread

1/8“

PTF

1/4”

ISO G

Option

170

Port size

Substitute

Substitute A G

Pressure range (bar) *1)

0,1 ... 0,7

Pressure range 10 bar

0,3 ... 3,5

0,3 ... 7

M *2)

0,3 ... 10 Gauge

Substitute

With

Without

Pressure range (bar) *1)

~ 54

Online at store.norgren.com

Standard

(42) 19

Substitute

Relieving

Non-relieving

*1) Outlet pressure can be adjusted to pressures in excess of and less than, those specified. Do not use these units to control pressures outside of the specified ranges. *2) When specifying 10 bar (145 psi) unit, eg. R07-205-RNMG, also note correct code at 6th digit.

Accessories

Models R07 series Model

Substitute

Port size

Outlet pressure range (bar)

Flow* (dm3/s)

Neck mounting bracket (incl. nut)

Mounting nut only plastic

Service Kit Mounting nut only metal

Gauge 0 … 10 bar

R07-100-RNKG

G1/8

0,3 … 7

6,5

18-025-003

2962-89

2962-04

18-015-989

R07-KITR

R07-200-RNKG

G1/4

0,3 … 7

6,5

18-025-003

2962-89

2962-04

18-015-989

R07-KITR

R07-105-RNMG

G1/8

0,5 … 10

18-025-003

2962-89

2962-04

18-015-989

R07-KITR

R07-205-RNMG

G1/4

0,5 … 10

18-025-003

2962-89

2962-04

18-015-989

R07-KITR

* Typical flow with 10 bar inlet pressure and 1 bar droop from set pressure of 6,3 bar.

For further information, visit store.norgren.com and use the new improved search function. If you cannot see the option you require please contact us.

5 Switches, Fittings, Tubings & Accessories s Fit ting e k a r B Air

Pneumatic and hydraulic options

Materials to suit most applications

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering fittings range. If you can’t see the option you require please contact us.

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Electro-Mechanical Pressure Switch 18D Pneumatic -1 … 30 ba

18D Hydraulic 5 … 420 bar

Page 174

04015600 Pneumatic 0 … 10 bar

Page 175

Page 176

Pneufit 10 Series Push-in fittings

C Series

Page 177

Page 201

DOT, TUV Commercial Vehicle Push to Connect Fittings Fleetfit Series Inch Tube Range

97400 Fleetfit Metric Tube Range

172 Page 191

Page 197

Online at www.imi-precision.com

Exhaust Guard 0613422, 0613423

Page 228

Low Pressure Rotowinks Pneumatic Visual Indicators

Page 229

High Pressure Rotowinks Pneumatic Visual Indicators G1/8

Page 230

Fast Find Guide Please note: These products represent only part of the IMI Precision Engineering fittings range. If you can’t see the option you require please contact us.

Gauges, Auto-drain, Drip leg drain

Page 231

Shuttle valve T65 G1/8 & G1/4

Page 232

Tubing & Hoses Ø 3 … 16 mm O/D

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Air Preparation Accessories

173

Page 233

Page 235

Inline Pressure Protection Valves (PPV) 5200-75

Page 237

Online at www.imi-precision.com

Serie PA2

ELECTRO-MECHANICAL PRESSURE SWITCH 18D Pneumatic -1 … 30 bar

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Gold-plated contacts

174

Models

• High cycle life • Vibration resistant to 15 g • Microswitch approved by UL and CSA • Intrinsically safe operation

Technical Data

Materials

Medium: For filtered, lubricated or non lubricated compressed air, neutral and incombustible gases

Housing: Aluminium (brass)

Operation: Diaphragm

Seals: NBR/FPM

Ambient temperature: -10°C … +85°C except for ATEX versions Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Repeatability: ±4%, of full scale

Dimensions 30

15,5

5,3

Accessories

Online at www.imi-precision.com

Standard Model

Pressure range (bar)

Fluid connection

Electrical connection

Switching pressure difference (bar)

Max. over pressure (bar)

Plug

Electrical connector M12 x 1 Straight x 2 m long 90° x 2 m long

0880100000000000

-1 … 0

G1/4

DIN EN 175301-803 Form A

0,15 … 0,18

–

0880110000000000

-1 … 1

G1/4

DIN EN 175301-803 Form A

0,25 … 0,35

–

0880200000000000

0,2 … 2

G1/4

DIN EN 175301-803 Form A

0,20 … 0,35

–

0880300000000000

0,5 … 8

G1/4

DIN EN 175301-803 Form A

0,35 … 0,85

–

0880400000000000

1 … 16

G1/4

DIN EN 175301-803 Form A

0,40 … 1,20

–

0880600000000000

1 … 30

G1/4

DIN EN 175301-803 Form A

1,00 … 5,00

–

0880226000000000*

0,2 … 4

G1/4

DIN EN 175301-803 Form A

0,20 … 0,35

0570110000000000

–

0880326000000000*

0,5 … 8

G1/4

DIN EN 175301-803 Form A

0,35 … 0,85

0570110000000000

–

0880426000000000*

1 … 16

G1/4

DIN EN 175301-803 Form A

0,40 … 1,20

0570110000000000

–

0881100000000000

-1 … 0

Flange

DIN EN 175301-803 Form A

0,15 … 0,18

–

0881200000000000

0,2 … 2

Flange

DIN EN 175301-803 Form A

0,20 … 0,35

–

0881300000000000

0,5 … 8

Flange

DIN EN 175301-803 Form A

0,35 … 0,85

–

0881400000000000

1 … 16

Flange

DIN EN 175301-803 Form A

0,40 … 1,20

–

0880160000000000

-1 … 0

G1/4

M12 x 1

0,15 … 0,18

–

0523057000000000

0523058000000000

0880260000000000

0,2 … 2

G1/4

M12 x 1

0,20 … 0,35

–

0523057000000000

0523058000000000

0880360000000000

0,5 … 8

G1/4

M12 x 1

0,35 … 0,85

–

0523057000000000

0523058000000000

0880460000000000

1 … 16

G1/4

M12 x 1

0,40 … 1,20

–

0523057000000000

0523058000000000

DIN EN 175301-803 Form A

0,35 … 0,85

0570110000000000

–

MODELS FOR WATER APPLICATIONS 0880323000000000

0,5 … 8

G1/4

MODELS CONFORMING TO ATEX – ZONE 2 AND 22 (Ex II 3G/D) 0880280000000000

0,2 … 2

G1/4

DIN EN 175301-803 Form A

0,20 … 0,35

0570110000000000

–

0880380000000000

0,5 … 8

G1/4

DIN EN 175301-803 Form A

0,35 … 0,85

–

0880480000000000

1 … 16

G1/4

DIN EN 175301-803 Form A

0,40 … 1,20

–

* Switch is LABS free, plug needs to be ordered separately, all other DIN connector versions include standard connector plug.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

ELECTRO-MECHANICAL PRESSURE SWITCH

18D Hydraulic 5 … 420 bar

Technical Data

Materials

• High number of switching cycles

Medium: For neutral, self lubricating fluids, e.g. hydraulic oil, lube oil, light fuel oil

Body: Aluminium/steel

• Vibration resistant to 15 g • Microswitch approved by UL and CSA • Intrinsically safe operation

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Microswitch with gold plated contacts

Seals: PTFE, NBR

Operation: Piston type sensor system Ambient/Media temperature: -25°C … +80°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Media viscosity: Up to 1000 mm2/s Repeatability: ±4%, of full scale

Dimensions G1/4

Flange 30

5,3

7,5

175

5,3

1 2

Standard Model

Pressure range (bar)

Fluid connection

Electrical connection

Switching pressure difference (bar)

Max. over pressure (bar)

0882100000000000

5 … 70

G1/4

DIN EN 175301-803 Form A

10,5 … 15

400

0882200000000000

10 … 160

G1/4

DIN EN 175301-803 Form A

11 … 17

400

0882300000000000

25 … 250

G1/4

DIN EN 175301-803 Form A

11 … 17

400

0882400000000000

40 … 420

G1/4

DIN EN 175301-803 Form A

17 … 38

600

0883100000000000

5 … 70

Flange

DIN EN 175301-803 Form A

10,5 … 15

400

0883200000000000

10 … 160

Flange

DIN EN 175301-803 Form A

11 … 17

400

0883300000000000

25 … 250

Flange

DIN EN 175301-803 Form A

11 … 17

400

0883400000000000

40 … 420

Flange

DIN EN 175301-803 Form A

17 … 38

600

All versions include standard connector plug.

Accessories Pressure port reducing nipple

Surge damper

Connector DIN EN 175301-803

0574767000000000 (brass)

0574773000000000 (brass)

0570110000000000 (Form A)

0550083000000000 (stainless steel)

0553258000000000 (stainless steel)

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Models

ELECTRO-MECHANICAL PRESSURE SWITCH 04015600 Pneumatic 0 … 10 bar

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Pneumatic • Wide adjustment range • N/O or N/C operation

Technical Data

Materials

Medium: Compressed air, filtered, lubricated and non-lubricated

Dlecast zinc alloy casing, NBR seals.

Operation: Pressure switch, adjustable Mounting: Holes in switch casing Ambient temperature: -10°C … +70°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions

176

1/2” BSP port

40 24 A/F Hax

72 98

ø 4,5

Online at www.imi-precision.com

61 CRS

30 CRS

Adjustment: Remove cover. Use 3 mm A/F key for adjustment and 13 mm A/F spanner or lockout.

Models Model

Pressure range (bar)

Fluid connection

Pressure differential (bar)

04015600

0 … 10

G1/8

0,2 … 0,7

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT

10 Series Push-in fittings

Technical Data

Materials

• Very compact units

Medium: Compressed air (For other media please consult Technical Department)

Nickel plated brass body Nickel plated brass for collet VMQ free NBR

• Easy tube insertion for rapid assembly of pneumatic circuits • Positive tube anchorage • All BSP taper threads pre-coated with non-PTFE based sealant • Straight adaptors feature internal hexagon for allen key

Operating pressure: Vacuum -18 bar (... 261 psi) (Dependent upon operating specification of tubing) Vacuum: -750 mm of Hg i.e. 98%

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Port size: Ø 4 ... 14 mm O/D tube, BSP threads

‘O’-ring: (FPM optional) Plastic sealing washer (parallel threads) Non - PTFE thread sealant (taper threads)

Ambient/Media temperature: -20°C ... +80°C ( -4 ... 176 °F) “Special” low temperature options contact Norgren Technical service

• VMQ free ‘O’-rings

Tube sizes: 4, 5, 6, 8, 10, 12, 14 mm O/D Tubing types: PA 11 or 12, PUR and other plasticised or unplasticised tubing which conforms to the tolerances specified in BS 5409, Part 1, 1976, light and normal duty, DIN 73378, DIN 74234, NFE 49-100 Repeatability: ±4%, of full scale

177

Method of assembly

1. Ensure that the end of the tube is cut square and is free from burrs.

2. Push the tube through the collet into the fitting.

Components

3. Continue pushing the tube through the ‘O’-ring until it bottoms on the tube stop then pull back.

4. T o disconnect push the tube into the fitting, hold down the collet and withdraw the tube.

Option selector

1 3

1 2 3 4

Collet Body Tube stop ‘O’-ring

10 ˙˙˙˙˙˙˙ Thread type

Thread size/tube size

Shape

Thread size/tube size

4 2

Accessories Silencer (plug in) 10011

Plug (acetal) 11004

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

90˚

PNEUFIT

10 Series Push-in fittings

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight adaptors and connectors Stem tailpiece adaptor (stem to hose bore) 10019

Straight connector (tube to tube) 10020

Straight stem connector 10022

Reducing/expanding connector 10023

Bulkhead connector (tube to tube) 10029

Straight stem adaptor (BSP taper) 10115

Straight stem adaptor (BSP parallel) 10215

Straight adaptor (BSP taper) 10125

Straight adaptor (BSP parallel) 10225

Female straight adaptor (female parallel BSP) 10226

Mixed bulkhead connector 10031

Elbow adaptors, connectors and banjos

178

Elbow connector 10040

Stem elbow connector 10043

Bulkhead swivel elbow connector 10049

Elbow adaptor (BSP taper) 10145

90° Swivel elbow adaptor (BSP taper) 10147

90° Swivel elbow adaptor (BSP parallel) 10247

Extended swivel elbow adaptor (BSP taper) 10154

45° Swivel elbow adaptor (BSP parallel) 10257

Elbow banjo assembly (non-Regulating BSP parallel) 10A51

Elbow banjo assembly (regulating-out BSP parallel) 10K51

Elbow banjo assembly (regulating-out BSPT taper) 10T00

Elbow banjo assembly (regulating-out BSPT taper) 10TA0

Online at www.imi-precision.com

Tee adaptors, connectors and banjos, ‘Y’ adaptors and connectors, 4-way connectors, manifolds Tee connector (tube x 3) 10060

Tee adaptor (BSP taper) 10165

Swivel tee adaptor (BSP taper) 10167

Swivel tee adaptor 4-way connector (BSP parallel) (tube x 4) 10268 10090

Parallel Y-connector 10082

Swivel tee adaptor (BSP parallel) 10267

Parallel Y-adaptor 10188

Tee banjo assembly (non-regulating parallel thread) 10A71

Parallel Y-adaptor 10288

Fixed side tee adaptor (BSP taper) 10175

Manifold 100D6

Swivel tee adaptor (BSP taper) 10168

Manifold 101D6

Banjo bodies and bolts Elbow banjo body 10051

Tee banjo body 10071

Banjo bolt (non-regulating single stacking) 20A00

Banjo bolt (non-regulating double stacking BSP parallel) 20B00

Banjo bolt (non-regulating triple stacking BSP parallel) 20C00

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Banjo bolt (non-regulating single stacking, top port BSP parallel) 20*00

Banjo bolt (regulating single stacking) 20*00

PNEUFIT

10 Series Push-in fittings

3,4

4,4

15,5

C T

øK

7,5

16,5

7,6

14,5

Model

ØA

ØK

9,6

24,5

20,5

100200400

11,5

24,5

100200500

100200600

33,5

100200800

35,5

100201000

44,5

100201200

51,5

20,5

100201400

52,5

Reducing/expanding connector 10023 C

øA

øK

ø A1

øS

ø A2

Stem tailpiece adaptor, stem to hose bore 10019

øA

*1) Dimensions here and in the individual tables refer to the collet being in the ‘IN’ position. *2) Dimensions here (minimum bore diameter) are common per tube size for all Connectors, elbows and Tees unless otherwise stated.

ø A1

øA

2,8

øS

øK

ØK

øV

Ø S*2) Ø T*1) V

øA

ØA O/D tube

Ø A1

Ø A2

ØS

Model

ØA

Ø A1

ØK

4,5

1,8

100230504

33,5

100190405

6,5

2,1

100230604

100190505

6,5

35,5

2,8

100230605

100190605

6,5

2,8

100230804

100190606

6,5

100230805

100190806

6,5

4,3

100230806

36,5

100190808

9,5

38,5

5,5

100231004

100191006

6,5

41,5

4,3

100231005

36,5

100191008

9,5

5,5

100231006

37,5

100191010

7,3

100231008

100191208

9,5

46,5

5,5

100231204

100191210

46,5

7,3

100231205

100191212

12,5

47,5

9,7

100231206

100191412

12,5

9,7

100231208

100231210

100231406

36,5

100231408

37,5

100231410

46,5

100231412

53,5

20,5

Reducing/expanding connector C 10023 øA

øK

øA

øS

ø A1

Straight stem connector 10022

Model

ØA

ØS

Model

ØA

Ø A1

ØK

100220400

2,6

100230406

100220500

3,4

100230608

37,5

100220600

100220800

100221000

7,6

100221200

9,6

100221400

11,5

Online at www.imi-precision.com

ØA

100190403

179

Model

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight connector, tube to tube 10020

Technical data

10 Series Push-in fittings

Mixed bulkhead connector 10031

Model

ØA

100290400

M10x1,0

Model

Ø A & Ø A1

100310404

M12x1,0

9,5

100290500

M12x1,0

100310606

M15x1,0

29,5

9,5

100290600

M14x1,5

35,5

100310808

M18x1,5

33,5

100290800

M16x1,5

36,5

100311010

M20x1,5

14,5

100291000

M20x1,5

43,5

100311212

M24x1,5

17,5

100291200

M24x1,5

50,5

100311414

M26x1,5

11,5

18,5

100291400

M24x1,5

50,5

Straight stem adaptor, BSP taper 10115

Straight stem adaptor, BSP parallel 10215 C

øS

øA

180

Online at www.imi-precision.com

Model

ØA

ØS

Model

ØA

Ø K1

101150418

R1/8

7,5

2,1

102150418

G1/8

13,5

ØS 2,1

101150428

R1/4

33,5

2,1

102150428

G1/4

7,5

17,5

2,1

101150518

R1/8

7,5

3,2

102150518

G1/8

30,5

13,5

3,3

101150528

R1/4

3,2

102150528

G1/4

7,5

17,5

3,3

101150618

R1/8

7,5

4,1

102150618

G1/8

13,5

101150628

R1/4

4,1

102150628

G1/4

34,5

7,5

17,5

101150818

R1/8

7,5

7,1

102150818

G1/8

32,5

13,5

101150828

R1/4

36,5

5,1

102150828

G1/4

35,5

7,5

17,5

101150838

R3/8

12,5

5,1

102150838

G3/8

21,5

101151028

R1/4

7,7

102151028

G1/4

41,5

7,5

17,5

6,5

101151038

R3/8

12,5

7,7

102151038

G3/8

43,5

21,5

101151048

R1/2

8,1

102151048

G1/2

25,5

101151238

R3/8

12,5

9,1

102151238

G3/8

48,5

21,5

101151248

R1/2

51,5

9,1

102151248

G1/2

52,5

25,5

101151448

R1/2

51,5

11,2

102151438

G3/8

48,5

21,5

102151448

G1/2

52,5

25,5

11,5

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

øK1

øA

øA1

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Bulkhead connector, tube to tube 10029

øA

PNEUFIT

10 Series Push-in fittings

Straight adaptor, BSP taper 10125 C B

øA

øK

øA 1 B

øA

ø K1

ØK

Ø K1

Model

ØA

2,5

–

1,5

101250418

R1/8

20,5

102250405

21,5

3,5

–

2,5

101250428

R1/4

102250418

G1/8

5,5

–

101250518

R1/8

22,5

7,5

102250428

G1/4

–

101250528

R1/4

102250505

3,5

–

2,5

101250618

R1/8

7,5

102250518

G1/8

23,5

5,5

–

101250628

R1/4

102250528

G1/4

22,5

–

101250818

R1/8

26,5

7,5

102250605

3,5

–

2,5

101250828

R1/4

102250618

G1/8

5,5

–

101250838

R3/8

12,5

102250628

G1/4

23,5

–

101250848

R1/2

102250818

G1/8

26,5

5,5

–

101251018

R1/8

31,5

7,5

102250828

G1/4

–

101251028

R1/4

102250838

G3/8

24,5

–

101251038

R3/8

12,5

102250848

G1/2

28,5

–

101251048

R1/2

33,5

102251018

G1/8

5,5

–

101251228

R1/4

102251028

G1/4

33,5

–

101251238

R3/8

12,5

102251038

G3/8

32,5

–

101251248

R1/2

102251048

G1/2

30,5

–

101251438

R3/8

39,5

12,5

102251228

G1/4

36,5

–

101251448

R1/2

102251238

G3/8

37,5

–

102251248

G1/2

34,5

–

102251438

G3/8

37,5

–

102251448

G1/2

38,5

–

Female straight adaptor, female parallel BSP 10226 C B

øA

Model

ØA

102260405

22,5

G 5

102260418

G1/8

24,5

7,5

102260428

G1/4

102260505

23,5

7,5

102260518

G1/8

25,5

7,5

102260528

G1/4

29,5

7,5

102260618

G1/8

102260628

G1/4

30,5

102260818

G1/8

102260828

G1/4

31,5

102261028

G1/4

36,5

102261038

G3/8

11,5

102261238

G3/8

11,5

102261248

G1/2

44,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

ØA 4

181

Model 102250403

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight adaptor, BSP parallel 10225 C

10 Series Push-in fittings

Stem elbow connector 10043 C

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Bulkhead swivel elbow connector 10049 C øA

PNEUFIT

øA ø A1

Model

ØA

Model

ØA

Ø A1

100400400

100430400

9,5

100400500

18,5

100430600

27,5

100400600

19,5

100430800

29,5

100400800

21,5

100430805

19,5

100401000

26,5

100401200

31,5

100401400

Bulkhead swivel elbow connector 10049

Elbow adaptor, BSP taper 10145

øA

øK

øA

182

Online at www.imi-precision.com

øA øB

Model

ØA

ØB

ØK

Model

ØA

100490400

M12x1,0 35,5

20,5

21,5

101450418

R1/8

7,5

100490500

M12x1,0 35,5

21,5

101450428

R1/4

100490600

M14x1,5 40

24,5

101450518

R1/8

15,5

18,5

7,5

100490800

M16x1,5 45

26,5

14,5

101450528

R1/4

100491000

M22x1,5 49

31,5

101450618

R1/8

19,5

7,5

100491200

M24x1,5 54

32,5

20,5

101450628

R1/4

100491400

M26x1,5 57

32,5

22,5

101450818

R1/8

21,5

7,5

101450828

R1/4

21,5

101450838

R3/8

12,5

101450848

R1/2

101451018

R1/8

18,5

26,5

7,5

101451028

R1/4

21,5

26,5

101451038

R3/8

26,5

12,5

101451048

R1/2

28,5

101451228

R1/4

23,5

31,5

101451238

R3/8

31,5

12,5

101451248

R1/2

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT

10 Series Push-in fittings

90o Swivel elbow adaptor, BSP parallel C 10247

øA

øK

øK1

ØK

Model

ØA

Ø K1

R1/8

20,5

7,5

102470403

17,5

3,5

–

101470428

R1/4

102470405

21,5

101470518

R1/8

18,5

7,5

102470418

G1/8

5,5

101470528

R1/4

18,5

24,5

102470428

G1/4

25,5

101470618

R1/8

19,5

21,5

7,5

102470505

18,5

101470628

R1/4

19,5

102470518

G1/8

18,5

22,5

5,5

101470638

R3/8

27,5

12,5

102470528

G1/4

18,5

101470818

R1/8

21,5

7,5

14,5

102470605

19,5

20,5

101470828

R1/4

21,5

14,5

102470618

G1/8

19,5

5,5

101470838

R3/8

30,5

12,5

14,5

102470628

G1/4

19,5

26,5

101470848

R1/2

34,5

14,5

102470818

G1/8

21,5

5,5

101471018

R1/8

26,5

25,5

7,5

102470828

G1/4

21,5

101471028

R1/4

26,5

102470838

G3/8

33,5

101471038

R3/8

26,5

30,5

12,5

102470848

G1/2

39,5

101471048

R1/2

26,5

34,5

102471018

G1/8

26,5

5,5

101471228

R1/4

31,5

20,5

102471028

G1/4

26,5

31,5

101471238

R3/8

31,5

12,5

20,5

102471038

G3/8

26,5

33,5

101471248

R1/2

31,5

20,5

102471048

G1/2

26,5

39,5

101471438

R3/8

30,5

12,5

21,5

102471228

G1/4

31,5

35,5

101471448

R1/2

31,5

21,5

102471238

G3/8

31,5

102471248

G1/2

31,5

102471438

G3/8

30,5

102471448

G1/2

31,5

Extended swivel elbow adaptor, BSP taper 10154

45o Swivel elbow adaptor, BSP parallel 10257

øA

45° B

øK1

Model

ØA

Model

ØA

101540418

R1/8

7,5

102570618

G1/8

17,5

19,5

101540428

R1/4

102570628

G1/4

17,5

7,5

Ø K1

101540618

R1/8

19,5

36,5

7,5

102570818

G1/8

19,5

20,5

101540628

R1/4

19,5

102570828

G1/4

19,5

7,5

101540818

R1/8

21,5

40,5

7,5

101540828

R1/4

21,5

44,5

101540838

R3/8

51,5

12,5

101541038

R3/8

26,5

51,5

12,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

ØA 4

183

Model 101470418

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

90o Swivel elbow adaptor, BSP taper 10147

10 Series Push-in fittings

øA

øS

øK

ØA

ØK

ØS

Model

ØA

18,5

9,5

2,5

10K510405

18,5

4,5

2,5

10A510418

G1/8

20,5

10K510418

G1/8

20,5

10A510505

2,5

10K510505

4,5

2,5

10A510518

G1/8

21,5

11,5

10K510518

G1/8

21,5

10A510618

G1/8

23,5

12,5

10K510605

4,5

2,5

10A510628

G1/4

7,5

8,5

10K510618

G1/8

23,5

10A510818

G1/8

23,5

10K510628

G1/4

36,5

8,5

10A510828

G1/4

24,5

7,5

8,5

10K510818

G1/8

23,5

10A510838

G3/8

26,5

16,5

10K510828

G1/4

24,5

36,5

8,5

10A511028

G1/4

7,5

8,5

10K510838

G3/8

26,5

51,5

10A511038

G3/8

10K511028

G1/4

36,5

8,5

ØS

10K511038

G3/8

51,5

10K511238

G3/8

51,5

10K511248

G1/2

57,5

Online at www.imi-precision.com

Elbow banjo assembly, regulating out BSPT taper 10T00

Elbow banjo assembly, regulating out BSPT taper 10TA0 C

øA

1 1

Model

ØA

E/E1

10T000418

R1/8

42/22,5

9,5

1 14

1 1

øA

184

Model 10A510405

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Elbow banjo assembly, regulating-out BSP parallel 10K51 C

Elbow banjo assembly, non-regulating BSP parallel 10A51

øA

PNEUFIT

Model

ØA

E/E1

10TA00418

R1/8

53/22,5

9,5

10T000618

R1/8

42/22,5

9,5

10TA00618

R1/8

53/22,5

9,5

10T000628

R1/4

25,5

54/29,5

13,5

10TA00628

R1/4

25,5

67/29,5

13,5

10T000818

R1/8

24,5

42/22,5

9,5

10TA00828

R1/4

67/29,5

14,5

10T000828

R1/4

54/29,5

13,5

10TA00838

R3/8

78/33

14,5

10T000838

R3/8

64/33

14,5

10TA01028

R1/4

31,5

67/29,5

13,5

10T001028

R1/4

31,5

54/29,5

13,5

10TA01038

R3/8

32,5

78/33

14,5

10T001038

R3/8

32,5

64/33

14,5

10TA01248

R1/2

90/41,5

10T001248

R1/2

72/41,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT

10 Series Push-in fittings

Tee adaptor, BSP taper 10165 C

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Tee connector, tube x 3 10060

øA

Model

ØA

Model

ØA

100600400

101650418

R1/8

7,5

100600500

18,5

101650518

R1/8

15,5

7,5

100600600

19,5

101650528

R1/4

100600800

42,5

21,5

101650618

R1/8

7,5

100601000

53,5

26,5

101650628

R1/4

100601200

63,5

31,5

101650818

R1/8

42,5

7,5

100601400

66,5

101650828

R1/4

42,5

101650838

R3/8

23,5

12,5

101651028

R1/4

53,5

21,5

101651038

R3/8

53,5

23,5

12,5

101651228

R1/4

63,5

23,5

101651238

R3/8

12,5

185

Swivel tee adaptor, BSP taper 10167

Swivel tee adaptor, BSP parallel 10267 C

øK

øA

B øK1

Model

ØA

ØK

Model

ØA

Ø K1

101670418

R1/8

21,5

7,5

102670403

3,5

–

101670428

R1/4

102670405

19,5

101670518

R1/8

7,5

102670418

G1/8

5,5

101670528

R1/4

24,5

102670505

101670618

R1/8

22,5

7,5

102670518

G1/8

5,5

101670628

R1/4

102670528

G1/4

101670818

R1/8

42,5

7,5

14,5

102670605

20,5

101670828

R1/4

42,5

14,5

102670618

G1/8

5,5

101670838

R3/8

43,5

30,5

12,5

14,5

102670628

G1/4

26,5

101671028

R1/4

53,5

102670818

G1/8

42,5

23,5

5,5

101671038

R3/8

53,5

30,5

12,5

102670828

G1/4

42,5

101671048

R1/2

53,5

34,5

102670838

G3/8

43,5

101671228

R1/4

63,5

20,5

102671028

G1/4

53,5

31,5

101671238

R3/8

63,5

12,5

20,5

102671038

G3/8

53,5

33,5

101671248

R1/2

63,5

20,5

102671228

G1/4

63,5

35,5

101671438

R3/8

61,5

12,5

22,5

102671238

G3/8

63,5

101671448

R1/2

63,5

22,5

102671448

G1/2

63,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

10 Series Push-in fittings

Fixed side tee adaptor, BSP taper 10175 E

C G

øS B

øA

øK

øA

ØA

ØK

ØS

Model

ØA

10A710405

37,5

9,5

2,5

101750418

R1/8

7,5

10A710418

G1/8

101750518

R1/8

15,5

18,5

7,5

10A710505

40,5

2,5

101750528

R1/4

10A710518

G1/8

43,5

11,5

101750618

R1/8

35,5

19,5

7,5

10A710605

41,5

11,5

2,5

101750628

R1/4

10A710618

G1/8

47,5

12,5

101750818

R1/8

21,5

7,5

10A710628

G1/4

48,5

7,5

8,5

101750828

R1/4

41,5

21,5

10A710818

G1/8

47,5

101750838

R3/8

45,5

23,5

12,5

10A710828

G1/4

49,5

7,5

8,5

101751028

R1/4

48,5

21,5

26,5

101751038

R3/8

23,5

26,5

12,5

101751228

R1/4

23,5

31,5

101751238

R3/8

56,5

31,5

12,5

186

Model

Swivel tee adaptor, BSP parallel 10268 E

øA

Online at www.imi-precision.com

Swivel tee adaptor, BSP taper 10168

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Tee banjo assembly, non-regulating parallel thread 10A71

PNEUFIT

B ø K1

Model

ØA

Model

ØA

Ø K1

101680418

R1/8

38,5

20,5

7,5

102680403

3,5

101680428

R1/4

102680405

36,5

19,5

101680518

R1/8

40,5

18,5

7,5

102680418

G1/8

38,5

5,5

101680528

R1/4

24,5

18,5

102680505

18,5

101680618

R1/8

22,5

19,5

7,5

102680518

G1/8

40,5

22,5

18,5

5,5

101680628

R1/4

44,5

19,5

102680528

G1/4

44,5

18,5

101680818

R1/8

21,5

7,5

102680618

G1/8

42,5

19,5

5,5

101680828

R1/4

47,5

21,5

102680628

G1/4

26,5

19,5

101680838

R3/8

52,5

30,5

12,5

102680818

G1/8

21,5

5,5

101681028

R1/4

55,5

26,5

102680828

G1/4

50,5

21,5

101681038

R3/8

30,5

26,5

12,5

102680838

G3/8

21,5

101681228

R1/4

63,5

31,5

102681028

G1/4

58,5

31,5

26,5

101681238

R3/8

31,5

12,5

102681038

G3/8

33,5

26,5

101681248

R1/2

31,5

102681228

G1/4

35,5

31,5

101681438

R3/8

66,5

12,5

102681238

G3/8

68,5

31,5

101681448

R1/2

102681438

G3/8

102681448

G1/2

72,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT

10 Series Push-in fittings

øA L

øK

øA

øA1

øD 1 O

1 For tupe ø 4 ... 8 = ø 3

For tupe ø 10 = ø 4

Model

ØA

Ø A1

ØD

ØK

Model

ØA

100820400

10,5

101880418

R1/8

43,5

7,5

22,5

10,5

100820600

38,5

12,5

101880618

R1/8

7,5

12,5

100820604

12,5

101880818

R1/8

7,5

13,5

100820800

40,5

13,5

101880828

R1/4

54,5

13,5

100820806

40,5

13,5

101881038

R3/8

12,5

42,5

100821000

49,5

20,5

101881048

R1/2

42,5

100821008

49,5

20,5

Parallel Y-Adaptor 10288

187

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Parallel Y-Adaptor 10188

Parallel Y-Connector 10082

øA

Model

ØA

102880405

42,5

22,5

10,5

102880605

12,5

4-way connector, tube x 4 10090

øA

øK

Model

ØA

100900400

ØK 10,5

100900500

45,5

100900600

47,5

100900800

57,5

14,5

100901000

68,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

ø3

10 Series Push-in fittings

C N

E L

øA1

øA

Model

ØD

100D60804

Ø A/Ø A1 08-abr

3,4

12,5

100D60806

08-jun

3,4

12,5

100D61006

10-jun

3,4

10,5

22,5

100D61008

10-ago

3,4

10,5

22,5

Manifold 101D6

C E

N L

øA1

1 For tupe ø 8 = ø 16

For tupe ø 10 = ø 20

2 For tupe ø 8 = ø 14

188

For tupe ø 10 = ø 16

øA N1

ØA

Ø A1

ØD

101D60428

R1/4

3,4

12,5

101D60438

R3/8

3,4

12,5

101D60628

R1/4

3,4

12,5

101D60638

R3/8

3,4

12,5

101D60838

R3/8

100

3,4

12,5

10,5

22,5

101D60848

R1/2

104

3,4

10,5

22,5

Elbow banjo body 10051

Tee banjo body 10071 C

øA

øK

øA

Online at www.imi-precision.com

Model

øK

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Manifold 100D6

PNEUFIT

Model

ØA

B for screw

ØK

Model

ØA

B for screw

ØK

100510405

18,5

12,5

9,5

100710405

37,5

12,5

9,5

100510418

G1/8

20,5

100710418

G1/8

100510505

12,5

100710505

12,5

100510518

G1/8

21,5

11,5

100710518

R1/8

11,5

100510605

12,5

100710605

41,5

12,5

11,5

100510618

G1/8

23,5

12,5

100710618

G1/8

47,5

12,5

100510628

G1/4

100710628

G1/4

48,5

100510818

G1/8

23,5

100710818

G1/8

47,5

100510828

G1/4

24,5

100710828

G1/4

49,5

100510838

G3/8

26,5

20,5

16,5

100511028

G1/4

100511038

G3/8

20,5

100511238

G3/8

20,5

17,5

100511248

G1/2

17,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT

10 Series Push-in fittings

Banjo bolt, non-regulating single stacking with top port BSP parallel 20*00

øS B

Model

ØS

Execution

Model

20A000005

2,5

single

20D000505

25,5

ØS 2,5

20A000018

G1/8

single

20D000528

G1/4

8,5

20A000028

G1/4

8,5

single

20D000538

G3/8

20A000038

G3/8

single

20E001818

G1/8

20A000048

G1/2

11,5

single

20E001828

G1/8

G1/4

35,5

20B000005

34,5

2,5

double

20E001838

G1/8

G3/8

20B000018

G1/8

46,5

double

20F002828

G1/4

8,5

20B000028

G1/4

52,5

8,5

double

20G003838

G3/8

20B000038

G3/8

double

20B000048

G1/2

72,5

11,5

double

G1/8

triple

G1/4

71,5

8,5

triple

20C000038

G3/8

triple

189

20C000018 20C000028

Regulating out banjo bolts, single stacking, (screwdriver adjustable), regulating in 20L00 C

Model

2 B

20K000005

27,5

Operating pressure 10 bar

20K000018

G1/8

10 bar

Model

20L000005

20L000018

G1/8

C 27,5

Operating pressure 10 bar

10 bar

20K000028

G1/4

36,5

10 bar

20L000028

G1/4

36,5

10 bar

20K000038

G3/8

51,5

10 bar

20L000038

G3/8

51,5

10 bar

20K000048

G1/2

10 bar

20L000048

G1/2

10 bar

Regulating out banjo bolts, single stacking (screwdriver adjustable), bi-directional 20M00

Model

20M000005

27,5

Operating pressure 10 bar

20M000018

G1/8

10 bar

8 14

20M000028

G1/4

36,5

10 bar

20M000038

G3/8

51,5

10 bar

20M000048

G1/2

10 bar

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Regulating out banjo bolts single stacking, (screwdriver adjustable), regulating out 20K00

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Banjo bolt, non-regulating stacking 20A00, 20B00, 20C00

10 Series Push-in fittings

Plug (Acetal) 11004 C

øA

øK

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Silencer, plug in 10011

øK

PNEUFIT

Model

ØA

ØK

Model

ØA

ØK

100110400

31,5

16,5

110040400

26,5

9,5

100110600

33,5

18,5

110040500

10,5

100110800

40,5

19,5

110040600

28,5

11,5

100111000

53,5

110040800

29,5

12,5

100111200

27,5

110041000

15,5

110041200

37,5

16,5

110041400

37,5

19,5

190

Online at www.imi-precision.com For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

DOT VEHICLE PUSH-TO-CONNECT FITTINGS Fleetfit Series

Technical Data

Materials

Operating medium: Compressed air Maximum working pressure: 0 to 150 psi (0 to 10 bar)

Body (straights), tube support, collet: Brass BS 2874 CZ 121

• Simple tube connection and disconnection – no tools required

Working temperature: -40°F to 212°F (–40°C to 100°C)

‘O’-Ring: Buna N (Low Nitrile)

• Fewer component parts – Internally machined form in body to secure collet, reduces number of potential leak paths

Ambient/Media temperature: -20°C ... +80°C ( -4 ... 176 °F) “Special” low temperature options contact Norgren Technical service

Thread Sealant: Precoat 5

• Corrosion resistant

Tubing: Tube should be to SAE J844 (Imperial) or DIN 74324 (Metric)

• Reduced assembly and maintenance times provide time/labor savings • Greater reliability and reduced testing • Ease of tube insertion in areas of restricted accessVMQ free ‘O’-rings

Body (elbows, tees): Brass BS 2874 CZ 122

Standards and legislation: Fittings and tubing comply to Department of Transport Federal Motor Vehicle Safety Standard, (DOT FMVSS 106) (Mandatory requirements for Inch tube fittings in U.S.A.) Society for Automotive Engineers (SAE) J2494 (Inch tube and fittings) and meet DIN 74324 and German TÜV requirements (Metric tube and fittings)

O-ring: The O-ring is to ensure adequate interference between the tube and fitting body therefore providing a pneumatic seal at all times. Tube Support: The tube support prevents the tube collapsing during extreme tensile loading conditions. Such conditions are only encountered during performance testing and far exceed those experienced during normal use.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Collet: The purpose of the collet is to grip the tube and ensure it is retained by the fitting at all times.

191

Body: The body has an internally machined form to secure the Collet(s), O-ring(s) and Tube support(s): It also has internal and externally machined thread form(s) for connection to ports where applicable.

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Fittings and tubing comply to Department of Transport Federal Motor Vehicle Safety Standard, (DOT FMVSS 106) (Mandatory requirements for Inch tube fittings in U.S.A.)

DOT VEHICLE PUSH-TO-CONNECT FITTINGS

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Tube Connection/Disconnection

Fleetfit Series

BODY

O RING

TUBE SUPPORT

TUBE STOP

COLLET

90˚

1. Ensure that the end of the tube is cut square and is free from burrs.

2. Push the tube through the collet into the fitting.

3. Continue pushing the tube through the O-ring until it bottoms on the tube stop. Then pull back on the tube to reinforce the collet teeth gripping action.

4. To disconnect: First ensure there is no air present. Push the tube into the fitting until it bottoms on the tube stop. Then hold down the collet and withdraw the tube.

192

90˚

E B

Male Connectors NPT SAE 630102

Female Connectors NPT SAE 630103

Models

A Tube O/D

B NPT

ØC

G A/F

95 4530 04M

1⁄4"

1⁄8"

0.50

1.04

0.43

0.37

1⁄2"

95 4355 04M

1/4''

1/8''

0.51

1.31

0.72

9/16''

95 4530 10M

1⁄4"

0.50

1.17

0.37

0.56

9⁄16"

95 4355 20M

3/8''

0.65

1.78

0.88

7/8''

95 4530 18M

1⁄4"

3⁄8"

0.50

1.20

0.31

0.56

11⁄16"

95 4355 30M

1/2''

0.91

2.11

0.96

11/16''

95 4530 06M

3⁄8"

1⁄8"

0.65

1.32

0.67

0.37

11⁄16"

95 4530 12M

3⁄8"

1⁄4"

0.66

1.48

0.63

0.56

11⁄16"

95 4530 20M

3⁄8"

0.66

1.42

0.54

0.56

11⁄16"

95 4530 29M

3⁄8"

1⁄2"

0.66

1.46

0.36

0.75

7⁄8"

95 4530 13M

1⁄2"

1⁄4"

0.79

1.68

0.75

0.56

7⁄8"

95 4530 21M

1⁄2"

3⁄8"

0.79

1.64

0.71

0.56

7⁄8"

95 4530 30M

1⁄2"

0.79

1.72

0.61

0.75

7⁄8"

95 4530 22M

5⁄8"

3⁄8"

0.98

1.87

0.89

0.56

1-1⁄6"

95 4530 31M

5⁄8"

1⁄2"

0.98

2.12

0.93

0.75

1-1⁄16"

95 4530 49M

3/4"

1/2"

1.00

2.11

0.89

0.75

1-3/16"

95 4530 55M

3/4"

1.16

2.03

0.81

0.75

1-3/16"

Part numbers ending with ‘V’ have Viton seals. *Special short 1/16" PTF-SAE short thread. 5/32" fittings have a Pneufit style body and collet.

Models

A Tube O/D

B NPT

ØC

Online at www.imi-precision.com

Reducing Unions (Inch) SAE 630101 Models

A Tube O/D

B Tube

ØC

94 4504 48M

3⁄8"

1⁄4"

0.67

1.71

94 4504 64M

1⁄2"

3⁄8"

0.81

1.91

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

DOT VEHICLE PUSH-TO-CONNECT FITTINGS

Fleetfit Series

E G

Reducing Unions SAE 630101 Models

Female Bulkhead Connectors NPT Female, UNF

Panel Hole ø 0.61

ØC

F (Max)

94 4507 04M

A Tube B Thread O/D 1⁄4" M15 x 1.0

–

1.41

–

0.87

Models

94 4507 06M

3⁄8"

0.81

0.70

1.75

0.33

0.87

M20 x 1.5

Please call 1.800.514.0129 for availability

C UNF 5⁄8"

ØD

95 4570 06M

A Tube B NPT O/D Female 1⁄4" 1⁄8"

0.28

H A/F 0.87

J A/F 15⁄16"

0.63

1.32

0.69

95 4570 01M

1⁄4"

5⁄8"

0.79

1.59

0.73

95 4570 03M

3⁄8"

1⁄4"

3⁄4"

0.79

2.20

1.30

0.51

0.87

15⁄16"

0.51

0.94

95 4570 04M

3⁄8"

3⁄4"

0.79

2.20

1-1/8"

1.30

0.51

0.94

95 4570 05M

1⁄2"

3⁄8"

7⁄8"

–

1-1/8"

1.89

1.50

–

1.06

95 4570 07M

1⁄2"

7⁄8"

–

1-5⁄16"

2.64

1.50

–

1.06

1-5⁄16"

193

95 4331 03M

A Tube B O/D NPT 3/16" 1/8"

ØC

0.47

0.81

0.75

95 4331 04M

1⁄4"

1⁄8"

0.55

0.81

0.79

95 4331 10M

1⁄4"

0.69

0.87

1.02

Male Swivel Elbows NPT SAE 6302AA

0.37

G A/F 0.47

0.37

0.55

0.56

0.71

Models 95 4114 04M

A Tube B O/D NPT 1⁄4" 1⁄8"

ØC

G A/F 0.43

0.51

0.83

0.91

0.37

95 4114 10M

1⁄4"

0.51

0.83

1.12

0.56

0.55

95 4114 18M

1⁄4"

3⁄8"

0.59

0.85

1.25

0.56

0.75

95 4331 18M

1⁄4"

3⁄8"

0.82

0.94

1.10

0.56

0.87

95 4114 06M

3⁄8"

1⁄8"

0.67

1.07

1.05

0.37

0.55

95 4331 27M

1⁄4"

1⁄2"

0.94

0.96

1.38

0.75

0.94

95 4114 12M

3⁄8"

1⁄4"

0.67

1.07

1.29

0.56

0.75

95 4331 06M

3⁄8"

1⁄8"

0.69

1.08

0.87

0.37

0.71

95 4114 20M

3⁄8"

0.67

1.07

1.24

0.56

0.75

95 4331 12M

3⁄8"

1⁄4"

0.69

1.06

1.02

0.56

0.71

95 4114 29M

3/8"

1/2"

0.67

1.07

1.44

0.75

0.87

95 4331 20M

3⁄8"

0.82

1.14

1.10

0.56

0.87

95 4114 13M

1⁄2"

1⁄4"

0.81

1.27

0.56

0.87

95 4331 29M

3⁄8"

1⁄2"

0.94

1.14

1.38

0.75

0.94

95 4114 21M

1⁄2"

3⁄8"

0.81

1.27

1.42

0.56

0.87

95 4331 13M

1⁄2"

1⁄4"

0.87

1.22

1.14

0.56

0.87

95 4114 30M

1⁄2"

0.81

1.27

1.62

0.75

0.87

95 4331 21M

1⁄2"

3⁄8"

0.87

1.26

1.14

0.56

0.87

95 4114 49M

3/4"

1⁄2"

1.18

1.52

1.77

0.75

0.87

95 4331 30M

1⁄2"

0.94

1.28

1.38

0.75

0.94

95 4331 98M

5⁄8"

3⁄8"

1.06

1.44

1.22

0.56

0.87

95 4331 31M

5⁄8"

1⁄2"

1.15

1.54

1.42

0.75

1.18

95 4331 49M

3/4"

1/2"

1.30

1.52

1.48

0.75

0.94

95 4331 55M

3/4"

1.15

1.59

1.50

0.75

1.18

CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Models

Male Elbows NPT SAE 630202

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Fleetfit Series

A C

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

DOT VEHICLE PUSH-TO-CONNECT FITTINGS

Union Elbows SAE 630201 Models

ØB

45° Male Elbows NPT SAE 630302

94 4511 04

A Tube O/D 1⁄4"

ØC

0.43

0.51

0.83

94 4511 06M

3⁄8"

0.57

0.67

1.07

94 4511 07

1⁄2"

0.71

0.81

1.26

Models 95 4600 04M

A Tube O/D 1⁄4"

B NPT 1⁄8"

0.87

0.81

0.37

95 4600 10M

1⁄4"

0.89

0.98

0.56

–

95 4600 06M

3⁄8"

1⁄8"

1.02

0.93

0.37

0.75

–

194

1⁄4"

1.06

1.10

0.56

0.75

–

3⁄8"

1.10

1.12

0.56

0.75

–

95 4600 29M

3⁄8"

1⁄2"

1.14

1.30

0.75

0.87

–

95 4600 13M

1⁄2"

1⁄4"

1.22

1.10

0.56

0.87

–

95 4600 21M

1⁄2"

3⁄8"

1.26

1.12

0.56

0.87

–

95 4600 30M

1⁄2"

1.30

0.75

0.87

–

95 4600 22M

5/8''

3/8''

1.46

1.02

0.56

–

1.06

95 4600 31M

5⁄8"

1⁄2"

1.46

1.22

0.75

–

1.06

95 4600 49M

3⁄4"

1⁄2"

1.52

1.30

0.75

1.00

–

" - (8 m /16

)

ØB

0.46

1.12

94 0509 06BP 3/8"

0.65

1.34

94 0509 07BP 1/2"

0.65

1.48

* Material: Thermoplastic E

J D

Online at www.imi-precision.com

A O/D Stem

H B C

Male Bulkhead Elbows, NPT Female, UNF SAE 631403 Models

C UNF ØD

H A/F

J A/F

95 4597 04M

A Tube B NPT O/D Female 1⁄4" 1⁄8"

5⁄8"

0.81

1.00

1.18

0.63

15⁄16"

0.87

95 4597 02M

1⁄2"

7⁄8"

1.02

1.33

1.61

0.98

1-5⁄16" 0.67

3⁄8"

G A/F –

3⁄8"

Plug* SAE 630109 Models

F A/F 0.56

3⁄8"

94 0509 04BP 1/4"

95 4600 12M

ØB

95 4600 20M

L ØA

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

DOT VEHICLE PUSH-TO-CONNECT FITTINGS Fleetfit Series

E F

J B

Male Run Tees NPT SAE 630424 Models

A Tube O/D

B Tube O/D

C NPT

ØD

J A/F

95 4586 28M

1⁄4"

1⁄8"

0.55

1.67

0.79

0.37

0.89

0.55

95 4586 13M

1⁄4"

0.69

1.85

0.96

0.56

0.89

0.71

95 4586 17M

1⁄4"

3⁄8"

0.82

2.03

1.10

0.56

0.93

0.87

95 4586 07M

1⁄4"

3⁄8"

0.82

2.03

1.10

0.56

1.14

0.87

95 4586 05M

3⁄8"

1⁄4"

0.69

2.05

0.96

0.56

0.93

0.71

95 4586 27M

3⁄8"

1⁄4"

3⁄8"

0.82

2.24

1.10

0.56

0.93

0.87

95 4586 03M

3⁄8"

1⁄4"

0.69

2.05

0.96

0.56

1.08

0.71

95 4586 10M

3⁄8"

0.82

2.24

1.10

0.56

1.14

0.87

95 4586 04M

3⁄8"

1⁄2"

0.91

2.64

1.42

0.75

1.22

0.94

95 4586 26M

3⁄8"

1⁄2"

3⁄8"

0.87

2.36

1.14

0.56

1.30

0.87

95 4586 20M

1⁄2"

3⁄8"

0.87

2.44

1.14

0.56

1.22

0.87

95 4586 11M

1⁄2"

3⁄8"

0.87

2.44

1.14

0.56

1.30

0.87

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

195

Male Swivel Run Tees NPT SAE 6308AB Models

A Tube O/D

B NPT

ØC

H A/F

95 4112 10M

1⁄4"

0.51

1.95

1.12

0.56

0.83

0.55

95 4112 12M

3⁄8"

1⁄4"

0.67

2.36

1.29

0.56

1.07

0.75

B C

90° Fixed Tee Models

A Tube O/D

B NPT Female

C NPT

ØD

95 4565 03M

3/8"

1/8"

3/8"

0.83

1.12

1.10

0.56

0.87

95 4565 04M

3/8"

1/8"

1/4"

0.83

1.20

1.10

0.56

0.87

95 4565 01M

1⁄2"

1⁄8"

3⁄8"

0.87

1.26

1.14

0.56

0.87

95 4565 02M

1⁄2"

1⁄4"

1⁄2"

0.94

1.28

1.38

0.75

0.94

Note: Ports are threaded on side shown.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

A C

Fleetfit Series

A J C

Male Branch Tees NPT SAE 630425 Models

A Tube O/D

B Tube O/D

C NPT

ØD

95 4590 02M

1⁄4"

1⁄8"

0.55

1.69

0.85

0.79

0.37

0.55

95 4590 12M

1⁄4"

0.69

1.77

0.89

0.96

0.56

0.71

95 4590 16M

3⁄8"

1⁄4"

0.69

1.97

0.89

0.96

0.56

0.71

95 4590 10M

3⁄8"

1⁄4"

0.69

2.17

1.08

0.96

0.56

0.71

95 4590 04M

1⁄2"

0.91

2.68

1.34

1.42

0.75

0.94

D C

B A

D C

H G

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

E F

DOT VEHICLE PUSH-TO-CONNECT FITTINGS

196

Male Swivel Branch Tees NPT SAE 6304AC Online at www.imi-precision.com

Models

Union Tee SAE 630401

ØC

95 4111 04M

A Tube B O/D NPT 1⁄4" 1⁄8"

0.51

1.67

0.83

0.91

0.37

H A/F 0.43

95 4111 12M

3⁄8"

1⁄4"

0.67

2.17

1.08

1.29

0.56

0.75

95 4111 20M

3⁄8"

0.67

2.17

1.08

1.24

0.56

0.75

95 4111 21M

1/2"

3/8"

0.81

2.56

1.28

1.42

0.56

0.87

95 4111 30M

1⁄2"

0.81

2.56

1.28

1.62

0.75

0.87

Models

A Tube O/D

ØB

94 4514 04M

1⁄4"

0.51

1.65

0.83

94 4514 06M

3⁄8"

0.67

2.13

1.07

94 4514 07M

1⁄2"

0.81

2.53

1.26

94 4514 08M

5⁄8"

1.06

3.07

1.54

CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

COMMERCIAL VEHICLE PUSH-IN FITTINGS

97400 Fleetfit Inch Range

• Simple tube connection and disconnection – no tools required • Fewer component parts – internally machined form in body to secure collet reduces number of potential leak paths • Internal tube support as standard for greater safety • Corrosion resistant

Technical Data

Materials

Medium: Compressed air

Body (straights), tube support, collet: Brass BS 2874 CZ 121

Maximum working pressure: 0 to 10 bar (0 ... 145 psi)

Body (elbows, tees): Brass BS 2874 CZ 122

Ambient/Media temperature: -40°C ... +100°C (-40 ... +212°F)

‘O’-ring: Buna N (low NBR)

Tubing: Tube should be to DIN 74324

Thread sealant: Precoat 5

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Tube size: Ø 6 ... 18 mm

Standards & Legislation: Fittings and tubing comply to department of transport Federal motor vehicle safety standard, (DOT FMVSS 106) (Mandatory requirements for Inch tube fittings in U.S.A.) Society for automotive engineers SAE J1131 (inch tube and fittings) German TUV approval and DIN 74324 (metric tube and fittings)

• Easy identification – all collets marked with tube size • Reduced assembly & maintenance times provide time/labour savings • Greater reliability and reduced testing • Ease of tube insertion in areas of restricted access

197

Swivel fittings: The swivel feature should be used for positioning purposes only and should not be used as a rotating joint. Additional ranges: The selection of metric fittings listed in this catalogue form part of a wider range of vehicle push-in fittings for further details consult Norgren Technical service.

Method of assemblyd radi

1. Ensure that the end of the tube is cut square and is free from burrs.

2. Push the tube through the collet into the fitting.

3. Continue pushing the tube through the ‘O’-ring until it bottoms on the tube stop. Then pull back on the tube to reinforce the collet teeth gripping action.

4. To disconnect - first ensure there is no air present. Push the tube into the fitting until it bottoms on the tube stop. Then hold down the collet and withdraw the tube.

Body The body has an internally machined form to secure the collet(s), ‘O’-Ring(s) and Tube support(s). It also has internal & externally machined thread form(s) for connection to ports where applicable.

‘O’-ring The ‘O’-Ring is to ensure adequate interference between the tube & fitting body therefore providing a pneumatic seal at all times.

Component functions 2

4 1 Tube support 2 ‘O’-ring 3 Body 4 Collet 5 Tube stop

Collet The purpose of the collet is to grip the tube and ensure it is retained by the fitting at all times.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Tube support The tube support prevents the tube collapsing during extreme tensile loading conditions. Such conditions are only encountered during performance testing and far exceed those experienced during normal use.

Online at www.imi-precision.com

90°

COMMERCIAL VEHICLE PUSH-IN FITTINGS 97400 Fleetfit Inch Range

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight adaptors and connectors Straight adaptor (metric) 974666

Straight adaptor (BSP taper) 974530

Straight connector (equal) 974503

Reducing straight connector 974504

Elbow adaptors and connector Swivel elbow adaptor (metric) 974521

Universal hobbs elbow adaptor (metric) 974138

Tee connectors

Swivel elbow adaptor (BSP parallel) 974104

Elbow adaptor (BSP taper) 974330

Elbow connector 974511

Tee connector (equal) 974514

Reducing tee connector 974588

Dimensions

198

Straight adaptor BSP taper thread

Straight adaptor metric thread

Model

ØK

Model

28,5

13,5

97466633

30,5

11,5

øA

øK

97466631

O/D B Tube A 6 M10 x 1,0 M12 x 1,5

øA

Online at www.imi-precision.com

øK

Taper B C

97453004

O/D TubeA 6

ØK

R1/8

26,5

9,5

12,5

97453010

R1/4

9,5

11,1

12,5

97466634

M14 x 1,5

31,5

13,5

97453005

R1/8

13,5

9,5

14,5

97466635

M16 x 1,5

27,5

7,5

97453011

R1/4

11,5

11,1

14,5

97466638

M22 x 1,5

30,5

97453012

R1/4

34,5

11,1

16,5

97466641

M10 x 1,0

29,5

12,5

97453020

R3/8

34,5

13,5

12,5

16,5

97453013

R1/4

39,5

11,1

97466643

M12 x 1,5

31,5

12,5

97466644

M14 x 1,5

31,5

13,5

97466645

M16 x 1,5

31,5

11,5

97466648

M22 x 1,5

30,5

97466651

M10 x 1,0

97466653

M12 x 1,5

97466654

M14 x 1,5

97466655

M16 x 1,5

97466658

M22 x 1,5

5,5

97466663

M12 x 1,5

38,5

18,5

20,5

97466664

M14 x 1,5

38,5

18,5

20,5

97466665

M16 x 1,5

20,5

97466668

M22 x 1,5

9,5

20,5

97466670

M22 x 1,5

19,5

97466679

M16 x 1,5

42,5

19,5

97466675

M22 x 1,5

44,5

19,5

97466680

M22 x 1,5

44,5

18,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

COMMERCIAL VEHICLE PUSH-IN FITTINGS

97400 Fleetfit Inch Range

øK G

øA

øK

Universal hobbs elbow adaptor metric thread

Model

O/D Tube A

ØK

97452135

M16 x 1,5 21,5

17,5

97452143

M12 x 1,5 23

17,5

97452145

M16 x 1,5 27

12,5

17,5

97452148

M22 x 1,5 25

35,5

97452153

M12 x 1,5 27,5

18,5

97452155

M16 x 1,5 27,5

18,5

97452158

M22 x 1,5 27,5

35,5

97452165

M16 x 1,5 32,5

97452168

M22 x 1,5 32,5

ØK

M10 x 1,0

23,5

97413833

M12 x 1,5

23,5

97413835

M16 x 1,5

24,5

21,5

17,5

97413838

M22 x 1,5

28,5

41,5

97413843

M12 x 1,5

25,5

31,5

17,5

97413845

M16 x 1,5

25,5

21,5

17,5

97413848

M22 x 1,5

28,5

41,5

97413851

M10 x 1,0

18,5

97413853

M12 x 1,5

18,5

97413854

M14 x 1,5

31,5

19,5

18,5

97413855

M16 x 1,5

33,5

21,5

18,5

97413858

M22 x 1,5

40,5

97413865

M16 x 1,5

35,5

21,5

97413868

M22 x 1,5

34,5

40,5

97413879

M16 x 1,5

38,5

97413875

M22 x 1,5

40,5

21,5

97413880

M22 x 1,5

39,5

Elbow connector

ØK

97410404 97410412

R1/4

27,5

Elbow adaptor BSP taper thread

øA

øK

Model

BSP parallel B R1/8

øA

O/D Tube A

øK

Model

97433004

O/D Tube A 6

BSP Taper B R1/8

20,5

9,5

97433010

R1/4

Model

O/D Tube A

ØK

97451104

97451105

97451113

97451106

97451107

20,5

97451115

38,5

97451108

ØK

97433011

R1/4

97433012

R1/4

17,5

97433013

R1/4

97433030

R1/2

30,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

øA

øK

O/D Tube A

97413831

199

Swivel elbow adaptor BSP parallel thread

Model

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Swivel elbow adaptor metric thread

97400 Fleetfit Inch Range

Reducing tee connector C

øA E

øA

øK

øA

øK

øA

ø A1

Model

O/D Tube A

ØK

97451404

97451405

45,5

97451413

97451406

97451407

20,5

97451415

38,5

97451408

Model 97458801

O/D Tube A 10

97458810

97458822

Tube A 10

Tube Ø A1 6

23,5

25,5

27,5

ØK

øA

ø A1

øK

200

øK

Reducing straight connector

Equal straight connector

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Equal tee connector

øA

COMMERCIAL VEHICLE PUSH-IN FITTINGS

Online at www.imi-precision.com

Model

O/D Tube A

ØK

Model

O/D Tube A

O/D Tube Ø A1

ØK

97450304

35,6

97450447

38,5

97450305

37,6

97450448

43,5

97450313

44,1

97450306

44,1

97450336

46,1

97450307

51,1

20,5

97450392

50,2

97450315

61,5

25,4

97450308

61,5

25,4

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Technical Data

Materials

• Norgren Pneufit® C fittings are ready to use, offering fast assembly with no need for tools providing optimum flow.

Medium: Compressed air

Body: PBT

Operating pressure: 10 bar (145 psi) max.

• Pneufit® C offers a broad range of over 1,000 composite push-in pneumatic fittings to complement our established all brass Pneufit® series.

Vacuum: 750 mm of Hg

Seals: NBR (silicone free) u-packing and O-rings

• Releasable stainless steel grab-ring to grip PA or PUR tube (85 or 95 durometer). • Nickel plated brass components provide corrosion and contamination resistance and an extended life. • Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads provides optimum rapid sealing.

Thread sizes: M5, M6, 1/8, 1/4, 3/8 and 1/2 ISO G, ISO Rc and ISO R

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Port size: Ø 4 ... 16 mm O/D tube, BSP threads

Threaded bodies: Nickel plated brass Release sleeve and backing ring: POM

Ambient/Media temperature: -20°C ... +60°C ( -4 ... 140°F)

Grab-ring: Stainless steel

Tube sizes: 4, 6, 8, 10, 12, 16 mm

Collar: Nickel plated brass

Tubing types: PA 11 or 12 PUR 85, 95 or 98 durometer

Thread sealant: Chemitech G175L

Warning: The Norgren Pneufit® C range must not be used in vehicle air braking or ancillary systems. For push in fittings suitable for these applications, please refer to the Fleetfit range.

201

Method of assembly

2. Push the tube through the collet into the fitting.

3. Continue pushing the tube through the ‘O’-ring until it bottoms on the tube stop then pull back.

4. To disconnect push the tube into the fitting, hold down the collet and withdraw the tube.

Components 2 1 3

5 4

Option selector

1 Impact resistant PBT body in black 2 Release buttons are red for metric, grey for inch 3 Stainless steel grab ring with special design to retain softer tube and provide easy releasability. 4 Silicon free U-packing provides leak tight tube seal under side loading. 5 Stem seal provides leak tight 360° swivel connection. 6 Nickel plated brass threads and notches on hex to signify NPT. 7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads.

C0˙˙˙˙˙˙˙

Thread type

Thread size/tube size

Shape

Thread size/tube size

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

1. Ensure that the end of the tube is cut square and is free from burrs.

PNEUFIT® C SERIES Metric Range

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight adaptors and connectors Straight adaptor, BSPT thread (external + internal hex) C0125

Straight adaptor, BSPP thread (external + internal hex) C0225

Straight adaptor, metric or BSPT thread (internal hex only) C012A/C022A

Female adaptor, metric or BSPP thread C0226

Straight union C0020

Straight union (unequal) C0020

Stem reducer C0023

Stem expander (stem/tube) C0023

Bulkhead union C0029

Straight adaptor, BSPP thread (female bulkhead) C0232

Stem union (equal) C0022

Stem union (unequal) C0022

Plug C0004

Cap (female plug) C0012

Elbow adaptors and connectors Union elbow C0040

90° Swivel elbow adaptor, BSPT thread C0147

90° Swivel elbow adaptor, BSPP thread C0247

Stem elbow C0043

90° Swivel elbow adaptor (extended), metric or BSPT thread CO154/CO254

90° Swivel elbow adaptor (female), metric or BSPT thread C0148/C0248

Bulkhead union elbow C0049

202

Y and quadruple connectors Online at www.imi-precision.com

Union Y (equal + unequal) C0082

Swivel Y adaptor, BSPT thread C0188

Swivel Y adaptor, BSPP thread C0288

Stem Y (equal + unequal) C0084

Quadruple stem reducer C0096

Quadruple Y union, BSPT thread C0195

Quadruple Y union, BSPP thread C0295

Quadruple reducer C0097

Tee connectors and adaptors Union tee (equal) C0060

Union tee (unequal) C006A

Swivel tee adaptor, BSPT thread C0167

Swivel tee adaptor, BSPP thread C0267

Stem tee (unequal) C0063

Stem side tee (equal) C0064

Stem side tee (unequal) C0064

Swivel side tee adaptor, Swivel side tee adaptor, BSPT thread C0168 BSPP thread C0268

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Swivel side tee adaptor (female), metric or BSPT thread C016C/ C026C

Stem tee (equal) C0063

PNEUFITÂ® C SERIES

Metric Range

Banjo flow control (out), BSPT thread C0TA0

Banjo flow control (out), metric or BSPP thread COK51

Banjo flow control (in), BSPT thread COSAO

Banjo flow control (in), metric or BSPP thread COL51

Shrouded banjo (out), BSPT thread COTBO

Shrouded banjo (out), metric or BSPP thread COKBO

Swivel speed control (out), BSPT thread COT56

Swivel speed control (out), metric or BSPP thread COK56

Speed control and pilot check, metric or BSPT thread CO1GN

Speed control and pilot check, metric or BSPT thread CO2GN

In-line flow control COOGE

In-line flow control C00GP

Cross and manifolds Male manifold, BSPT thread C01D3

Stem manifold C00J3

Banjo, metric or BSPP thread C0A51

Banjo (with top port), metric or BSPT thread COD51, COE51, COF51, COG51

2x Swivel elbow adaptor, BSPT thread C0Q51

2x Swivel elbow adaptor, BSPP thread C0B51

3x Swivel elbow adaptor, BSPT thread COH51

3x Swivel elbow adaptor, BSPP thread C0C51

Single universal tee, BSPT thread C0N71

Single universal tee, BSPP thread C0A71

Double universal tee, BSPT thread COQ71

Double universal tee, BSPP thread C0B71

Triple universal tee, BSPT thread C0H71

Triple universal tee, BSPP thread COC71

Branch adaptor, BSPT thread CON70

Branch adaptor, metric or BSPP thread COA70

Female branch adaptor, Female branch adaptor, Double branch adaptor, Double branch adBSPT thread metric or BSPP thread BSPT thread aptor, C0*7K C0*7J C0Q70 BSPP thread C0B70

Triple branch adaptor, BSPT thread COH70

Triple branch adaptor, BSPP thread C0C70

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Manifold union C00D3

203

Union cross C0090

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Banjo flow controler

PNEUFITÂ® C SERIES Metric Range

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

In-line non-return valve In-line non-return valve C00GL

In-line non-return valve (in), BSPT thread C01G2

In-line non-return valve (in), metric or BSPP thread C02G2

In-line non-return valve (out), BSPT thread C01G3

In-line non-return valve (out), metric or BSPP thread C02G3

Straight adaptor, BSPP thread C0224

Straight union C002J

Swivel elbow, BSPT thread CO14J

Swivel elbow, BSPP thread C024J

3/2 Shut-off valves, BSPT thread CO1GH

3/2 Shut-off valves, BSPT thread CO1GJ

3/2 Shut-off valves CO1GF

Self sealing adaptors Straight adaptor, BSPT thread C0124

Hand valves 3/2 Shut-off valves, BSPT thread CO1GG

204

Online at www.imi-precision.com For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFITÂŽ C SERIES

Metric Range

3, 4 and 6 mm M5

C00G*0400

Needle turn

7 8

9 10

Needle turn

7 8

Pressure (bar)

9 10

7 8

Pressure (bar)

9 10

500 400 300 200 100 0

Needle turn

7 8

Pressure (bar)

200

Pressure (bar)

400

06-02, 04-02 0

1 2 3 4 5 6 7 8 9 10 1112

Control flow

Free flow

1000 800 600 400 200 1

Needle turn

7 8

250 150 50 1

9 10

Free flow

1000 800 600 400 200 0

Needle turn

Pressure (bar)

6, 8, 10 and 12 mm 3/8

8 7 5 3 1

350

7 8

Pressure (bar)

C00G*1000

Control flow

1 9

13 15

7 8

8 7 5 3 1

1500 1000 500 3

9 10

7 8

Pressure (bar)

Needle turn

Free flow

Free flow Flow rate (l/m)

Control flow

Free flow 800 600 400 200

C00G*1200

Pressure (bar)

Flow rate (l/m)

8, 10 and 12 mm1/2

100

Pressure (bar)

Needle turn

2000

300

2000 1500 1000 500 0

7 8

Pressure (bar)

1000

Control flow

600 200 0

Needle turn

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

8 7 5 3 1 9 10

Flow rate (l/m)

500

Pressure (bar)

Flow rate (l/m)

200

8 7 5 3 1

Flow rate (l/m)

600

Control flow 700

Pressure (bar)

1000

Flow rate (l/m)

800

Flow rate (l/m)

1000

8 7 5

1400

Pressure (bar)

Flow rate (l/m)

Free flow 1400

1000 750 500 250 0

7 8

Pressure (bar)

Online at www.imi-precision.com

8 7 5 3 1

600

Flow rate (l/m)

C00G*0800

Control flow

800

8 7 5 3

Flow rate (l/m)

Free flow

Control flow 250 200 150 100 50

Flow rate (l/m)

04-01

4, 6, 8, 10 and 12 mm 1/4 Flow rate (l/m)

Free flow

500 400 300 200 100

Needle turn

Pressure (bar)

3 1

Pressure (bar)

200

Flow rate (l/m)

8 7

100 3

205

Flow rate (l/m)

Control flow

300

125 100 75 50 25

C00G*0600

400

Pressure (bar)

4, 6 and 8 mm 1/8

60 20

Pressure (bar)

Free flow 8 7 5 3 1

100

Flow rate (l/m)

100

Control flow 140

Pressure (bar)

150

Flow rate (l/m)

Free flow 8 7 5 3 1

120

Flow rate (l/m)

Control flow

160

Flow rate (l/m)

Speed controllers flowrate for C00GE, C00GP

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Speed controllers flowrate for C0K51, C0TA0, C0L51, C0K56, C0T56 and C0SA0 banjo types

PNEUFIT® C SERIES

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Speed controllers flowrate for C01GN and C02GN banjo types

Metric Range

8, 10 and 12 mm 3/8

9 10

Control flow

Free flow

7 8

800

600 400

200

Pressure (bar)

Needle turn

9 10

Flow rate (l/m)

100

500 400 300 200 100 0

Flow rate (l/m)

5 3 1

200

Flow rate (l/m)

300

Pressure (bar)

Flow rate (l/m)

Control flow 400

Pressure (bar)

6 and 8 mm 1/8

500 400 300 200 100 0

Free flow

Needle turn

7 8

Pressure (bar)

10 and 12 mm 1/2

6 and 8 mm 1/4

9 10

Needle turn

7 8

Control flow

Free flow 5 3 1

1000

8 7 5 3 1

600 200 0

9 10

0 1 2 3 4 5 6 7 8 9 10 11

Flow rate (l/m)

100

1000 800 600 400 200 0

Pressure (bar)

200

500 400 300 200 100 0

Flow rate (l/m)

300

Flow rate (l/m)

Pressure (bar)

Flow rate (l/m)

206

Free flow Control flow

400

500 400 300 200 100 0

Needle turn

Pressure (bar)

7 8

Pressure (bar)

øK

øA

øX

Online at www.imi-precision.com

Technical Data ØA

ØK

T*1)

ØX

ØK

10,5

9,5

12,5

16,5

14,5

18,5

17,5

16,5

20,5

23,5

Thread

Recommended torque 1,5 Nm

Recommended torque -

2,3 Nm

G1/8

10 Nm

R1/8

7 Nm

G1/4

15 Nm

R1/4

12 Nm

G3/8

25 Nm

R3/8

22 Nm

G1/2

40 Nm

R1/2

28 Nm

1) Dimensions here and in the individual tables refer to the collet being in the‘IN’ position.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

C G

øA

Female adaptor C0226

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight adaptor (external + internal hex) C0125

Model

ØA

Model

ØA

C01250418

R1/8

21,5

C02260405

C01250428

R1/4

20,5

C02260418

G1/8

26,5

C01250438

R3/8

C02260428

G1/4

28,5

C01250618

R1/8

C02260438

G3/8

C01250628

R1/4

C02260618

G1/8

27,5

C01250638

R3/8

C02260628

G1/4

29,5

C01250648

R1/2

29,5

C02260638

G3/8

C01250818

R1/8

27,5

C02260818

G1/8

28,5

C01250828

R1/4

25,5

C02260828

G1/4

30,5

C01250838

R3/8

C02260838

G3/8

31,5

C01250848

R1/2

29,5

C02260848

G1/2

34,5

C01251018

R1/8

28,5

C02261018

G1/8

31,5

C01251028

R1/4

30,5

C02261028

G1/4

31,5

C01251038

R3/8

24,5

C02261038

G3/8

32,5

C01251048

R1/2

29,5

C02261048

G1/2

34,5

C01251218

R1/8

31,5

C02261228

G1/4

34,5

R1/4

C02261238

G3/8

34,5

R3/8

C02261248

G1/2

36,5

R1/2

R3/8

37,5

C01251648

R1/2

40,5

øA

Straight adaptor (internal hex only) C012A, C022A G

Model

ØA

C02250405

1 10

Model

ØA

C022A0405

4,5

1 2

C02250406

C022A0406

C02250418

G1/8

21,5

C012A0418

R1/8

20,5

C02250428

G1/4

23,5

C012A0428

R1/4

20,5

C02250438

G3/8

C012A0438

R3/8

20,5

C02250605

23,5

C022A0605

22,5

C02250606

C022A0606

22,5

C02250618

G1/8

26,5

C012A0618

R1/8

C02250628

G1/4

24,5

C012A0628

R1/4

22,5

C02250638

G3/8

25,5

C012A0638

R3/8

22,5

C02250818

G1/8

26,5

C012A0818

R1/8

C02250828

G1/4

26,5

C012A0828

R1/4

C02250838

G3/8

C012A0838

R3/8

C02250848

G1/2

C012A0848

R1/2

C02251018

G1/8

29,5

C012A1018

R1/8

C02251028

G1/4

C012A1028

R1/4

C02251038

G3/8

C012A1038

R3/8

C02251048

G1/2

28,5

C012A1048

R1/2

C02251228

G1/4

C012A1218

R1/8

C02251238

G3/8

31,5

C012A1228

R1/4

32,5

C02251248

G1/2

31,5

C012A1238

R3/8

32,5

C012A1248

R1/2

32,5

C02251638

G3/8

36,5

C02251648

G1/2

36,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Straight adaptor (external + internal hex) C0225

12 16

øA

C01251248 C01251638

207

C01251228 C01251238

PNEUFIT® C SERIES

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Straight union C0020

Metric Range

Straight union (unequal) C0020

øA

øD

ø A1

Model

ØA

ØD

Model

ØA

Ø A1

C00200400

34,5

3,3

4,5

10,5

C00200604

36,5

C00200600

3,3

5,5

12,5

C00200804

38,5

C00200800

39,5

4,3

14,5

C00200806

37,5

C00201000

4,3

17,5

C00201006

C00201200

4,3

9,5

20,5

C00201008

C00201600*

C00201208

C00201210

C00201612

49,5

*No nail hole in 16 mm

Stem union (equal) C0022 øA

øA

ø A1

Stem reducer C0023 F

Ø A1

Model

ØA

21,5

C00220400

C00230804

22,5

C00220600

C00230806

44,5

23,5

C00220800

C00231006

47,5

26,5

C00221000

C00231008

49,5

27,5

C00221200

C00231206

29,5

C00221600

C00231208

52,5

30,5

C00231210

56,5

C00231612

57,5

Straight adaptor (female bulkhead) C0232

Stem expander (stem/tube) C0023

øA

øA1

F C

Model

ØA

Ø A1

C00230406

C00230608

26,5

Bulkhead union C0029

Online at www.imi-precision.com

ØA 6

øA

208

Model C00230604

P O

Model

ØA

C02320418

G1/8

M12x1

26,5

C02320428

G1/4

M12x1

C02320438

G3/8

M12x1

C02320618

G1/8

M14x1

28,5

C02320628

G1/4

M14x1

30,5

C02320638

G3/8

M14x1

31,5

C02320818

G1/8

M16x1

29,5

C02320828

G1/4

M16x1

31,5

C02320838

G3/8

M16x1

32,5

C02321028

G1/4

M20x1

32,5

Model

ØA

C00290400

M12x1

35,5

24,5

C02321038

G3/8

M20x1

33,5

C00290600

M14x1

27,5

C02321048

G1/2

M20x1

C00290800

M16x1

29,5

C02321228

G1/4

M22x1

C00291000

M20x1

31,5

C02321238

G3/8

M22x1

C00291200

M22x1

50,5

C02321248

G1/2

M22x1

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Stem union (unequal) C0022

øA

øA1

ø A1

øA

F C

Model

ØA

Ø A1

Model

ØA

Ø A1

C00220604

C00040400

17,5

C00220806

41,5

20,5

C00040600

18,5

C00221008

43,5

21,5

C00040800

C00221210

46,5

22,5

C00041000

C00221612

C00041200

29,5

C00041600

Union elbow C0040

Cap (female plug) C0012

øD

øA

ø A1

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Plug C0004

ØA

ØD

Model

ØA

Ø A1

3,3

8,5

10,5

C00120400

10,5

C00400600

3,3

7,5

12,5

C00120600

12,5

C00400800

4,3

22,5

14,5

C00120800

14,5

C00401000

4,3

C00121000

17,5

C00401200

4,3

13,5

C00121200

19,5

C00401600

4,3

25,5

C00121600

90° Swivel elbow adaptor C0247 E

øA

Model

ØA

Model

ØA

C01470418

R1/8

24,5

18,5

C02470406

18,5

G 4,5

C01470428

R1/4

26,5

18,5

C02470418

G1/8

22,5

18,5

C01470438

R3/8

27,5

18,5

C02470428

G1/4

24,5

18,5

C01470618

R1/8

26,5

20,5

C02470438

G3/8

24,5

18,5

C01470628

R1/4

29,5

20,5

C02470605

20,5

4,5

C01470638

R3/8

30,5

20,5

C02470606

20,5

4,5

C01470648

R1/2

33,5

20,5

C02470618

G1/8

24,5

20,5

C01470818

R1/8

C02470628

G1/4

26,5

20,5

C01470828

R1/4

C02470638

G3/8

26,5

20,5

C01470838

R3/8

C02470818

G1/8

C01470848

R1/2

C02470828

G1/4

C01471018

R1/8

28,5

23,5

C02470838

G3/8

C01471028

R1/4

31,5

23,5

C02470848

G1/2

C01471038

R3/8

32,5

23,5

C02471018

G1/8

26,5

23,5

C01471048

R1/2

35,5

23,5

C02471028

G1/4

28,5

23,5

C01471218

R1/8

32,5

27,5

C02471038

G3/8

28,5

23,5

C01471228

R1/4

34,5

27,5

C02471048

G1/2

29,5

23,5

C01471238

R3/8

35,5

27,5

C02471228

G1/4

32,5

27,5

C01471248

R1/2

38,5

27,5

C02471238

G3/8

32,5

27,5

C01471638

R3/8

32,5

C02471248

G1/2

32,5

27,5

C01471648

R1/2

32,5

C02471638

G3/8

32,5

C02471648

G1/2

32,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

90° Swivel elbow adaptor C0147

209

Model C00400400

PNEUFIT® C SERIES

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Stem elbow C0043

Metric Range

90° Swivel elbow adaptor (female) C0148/C0248

øA

øA1 B

Model

ØA

Ø A1

Model

ØA

C00430400

28,5

C02480405

21,5

18,5

G 4,5

C00430600

31,5

20,5

C02480406

21,5

18,5

4,5

C00430800

34,5

C01480418

R1/8

22,5

18,5

C00431000

C01480428

R1/4

24,5

18,5

C00431200

C02480605

23,5

20,5

4,5

C00431600

48,5

C02480606

23,5

20,5

4,5

90° Swivel elbow adaptor (extended) C0154/C0254 E

210

R1/8

24,5

20,5

R1/4

26,5

20,5

C01480638

R3/8

27,5

20,5

C01480818

R1/8

C01480828

R1/4

C01480838

R3/8

C01481028

R1/4

28,5

23,5

C01481038

R3/8

29,5

23,5

C01481048

R1/2

31,5

23,5

C01481228

R1/4

31,5

27,5

C01481238

R3/8

32,5

27,5

C01481248

R1/2

34,5

27,5

øA

C01480618 C01480628

33,5

18,5

4,6

C02540406

18,5

4,6

C01540418

R1/8

35,5

18,5

C01540428

R1/4

37,5

18,5

C01540438

R3/8

38,5

18,5

C02540605

20,5

4,5

C02540606

37,5

20,5

4,5

C01540618

R1/8

20,5

C01540628

R1/4

20,5

C01540638

R3/8

20,5

C01540648

R1/2

20,5

C01540818

R1/8

C01540828

R1/4

C01540838

R3/8

C01540848

R1/2

C01541018

R1/8

47,5

23,5

C01541028

R1/4

49,5

23,5

C01541038

R3/8

50,5

23,5

C01541048

R1/2

53,5

23,5

C01541218

R1/8

27,5

C01541228

R1/4

27,5

C01541238

R3/8

27,5

C01541248

R1/2

27,5

C01541638

R3/8

32,5

C01541648

R1/2

32,5

Bulkhead union elbow C0049 E

ØA

C02540405

Model

øA

Online at www.imi-precision.com

øA B

Model

ØA

C00490400

M12x1

32,5

18,5

5,5

C00490600

M14x1

20,5

C00490800

M16x1

40,5

6,5

11,5

C00491000

M20x1

42,5

23,5

C00491200

M22x1

27,5

7,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

ø A1

øA

Swivel Y adaptor C0288 L

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Union Y C0082

C G O

Equal Model

ØA

Ø A1

Model

ØA

C00820400

3,3

14,5

10,5

C02880405

4,5

L 10,5

C00820600

3,3

16,5

12,5

C02880406

4,5

10,5

C00820800

4,3

18,5

14,5

C02880418

G1/8

10,5

C00821000

47,5

4,3

17,5

C02880428

G1/4

10,5

C00821200

4,3

20,5

Unequal Model

ØA

Ø A1

C00820604

3,3

10,5

C00820804

39,5

3,3

10,5

C00820806

4,3

12,5

C00821006

3,3

16,5

17,5

C00821008

4,3

14,5

3,3

17,5

46,5

4,3

18,5

17,5

G3/8

10,5

41,5

4,5

12,5

C02880606

41,5

4,5

12,5

C02880618

G1/8

42,5

12,5

C02880628

G1/4

44,5

12,5

C02880638

G3/8

45,5

12,5

C02880648

G1/2

46,5

12,5

C02880818

G1/8

43,5

14,5

C02880828

G1/4

45,5

14,5

C02880838

G3/8

46,5

14,5

C02880848

G1/2

47,5

14,5

C02881018

G1/8

49,5

17,5

C02881028

G1/4

51,5

17,5

C02881038

G3/8

52,5

17,5

C02881048

G1/2

53,5

17,5

C02881228

G1/4

20,5

G3/8

20,5

G1/2

20,5

G C

R1/8

41,5

L 10,5

C01880428

R1/4

42,5

10,5

C01880438

R3/8

43,5

10,5

øA

ØA

C01880418

Model

Stem Y C0084 ø A1

øA

C02881238 C02881248

F C

Equal

C01880618

R1/8

12,5

C01880628

R1/4

12,5

C01880638

R3/8

12,5

Model

ØA

Ø A1

C00840400

49,5

10,5

C01880648

R1/2

12,5

C01880818

R1/8

45,5

14,5

C00840600

54,5

12,5

C01880828

R1/4

48,5

14,5

C00840800

14,5

C01880838

R3/8

48,5

14,5

C00841000

17,5

C01880848

R1/2

52,5

14,5

C00841200

71,5

20,5

C01881018

R1/8

17,5

C01881028

R1/4

17,5

C01881038

R3/8

17,5

C01881048

R1/2

56,2

17,5

C01881218

R1/8

52,5

20,5

C01881228

R1/4

54,5

20,5

C01881238

R3/8

55,5

20,5

C01881248

R1/2

58,5

20,5

Unequal Model

ØA

Ø A1

C00840604

51,5

10,5

C00840806

56,5

12,5

C00841008

14,5

C00841210

17,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Swivel Y adaptor C0188

4 6

211

C00821208 C00821210

C02880438 C02880605

Metric Range

øA

ø A1

øA

Quadruple Y union C0295

H C

Model

ØA

Ø A1

ØD

Model

ØA

ØD

C00960604

3,3

10,5

C02950418

G1/8

3,3

10,5

C00960806

40,5

3,3

15,5

12,5

25,5

C02950428

G1/4

3,3

6,5

10,5

C02950618

G1/8

3,3

6,5

15,5

12,5

25,5

C02950628

G1/4

3,3

15,5

12,5

25,5

Quadruple Y union C0195

* see drawing C0096 series

Quadruple reducer C0097 D

ø A1

212

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Quadruple stem reducer C0096 L

PNEUFIT® C SERIES

ØA

ØD

C01950418

R1/8

3,3

10,5

Model

ØA

Ø A1

ØD

C01950428

R1/4

3,3

10,5

C00970604

43,5

3,3

12,5

C01950618

R1/8

3,3

15,5

12,5

25,5

C00970806

3,3

15,5

14,5

25,5

C01950628

R1/4

3,3

15,5

12,5

25,5

* see drawing C0096 series

Union T (unequal) C006A

Union T (equal) C0060

øA

øD H

øA

øD

Online at www.imi-precision.com

Model

ø A1 øA

Model

ØA

ØD

Model

ØA

Ø A1

ØD

C00600400

36,5

3,3

12,5

8,5

10,5

C006A0604

41,5

3,3

12,5

C00600600

21,5

3,3

13,5

7,5

12,5

C006A0806

4,3

13,5

9,5

C00600800

23,5

4,3

14,5

C006A1006

4,3

13,5

17,5

C00601000

25,5

4,3

15,5

17,5

C006A1008

4,3

17,5

C00601200

29,5

4,3

16,5

12,5

20,5

C006A1208

25,5

4,3

12,5

20,5

C00601600

34,5

4,3

25,5

C006A1210

27,5

4,3

15,5

12,5

20,5

C006A1610

30,5

4,3

15,5

25,5

C006A1612

63,5

4,3

16,5

25,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Swivel tee adaptor C0267 C

øA

Model

ØA

Model

ØA

C01670418

R1/8

37,5

24,5

C02670405

37,5

G 4,5

C01670428

R1/4

37,5

26,5

C02670406

37,5

4,5

C01670438

R3/8

37,5

27,5

C02670418

G1/8

37,5

C01670618

R1/8

26,5

C02670428

G1/4

37,5

C01670628

R1/4

29,5

C02670438

G3/8

37,5

C01670638

R3/8

30,5

C02670605

4,5

C01670648

R1/2

33,5

C02670606

4,5

C01670818

R1/8

C02670618

G1/8

24,5

C01670828

R1/4

C02670628

G1/4

26,5

C01670838

R3/8

C02670638

G3/8

27,5

C01670848

R1/2

C02670648

G1/2

28,5

C01671018

R1/8

28,5

C02670818

G1/8

44,5

C01671028

R1/4

C02670828

G1/4

44,5

C01671038

R3/8

32,5

C02670838

G3/8

44,5

R1/2

35,5

C02670848

G1/2

44,5

R1/8

32,5

C02671018

G1/8

26,5

C01671228

R1/4

34,5

C02671028

G1/4

28,5

C01671238

R3/8

35,5

C02671038

G3/8

29,5

R1/2

38,5

C02671048

G1/2

30,5

R3/8

64,5

C02671228

G1/4

31,5

C01671648

R1/2

64,5

G3/8

32,5

G1/2

33,5

C02671638

G3/8

64,5

C02671648

G1/2

64,5

Stem tee C0063

øA

Swivel tee adaptor (female) C016C/C026C

C02671238 C02671248

ØA

C026C0405

37,5

G 8

C026C0406

37,5

C016C0418

R1/8

C016C0428

R1/4

øA1

Model

F E

Equal

C026C0605

17,5

C026C0606

17,5

Model

ØA

Ø A1

C016C0618

R1/8

17,5

C00630400

37,5

32,5

C016C0628

R1/4

17,5

C00630600

34,5

C016C0638

R3/8

17,5

C00630800

44,5

C016C0818

R1/8

44,5

18,5

C00631000

37,5

C016C0828

R1/4

44,5

18,5

C00631200

C016C0838

R3/8

44,5

18,5

C016C0848

R1/2

44,5

18,5

C016C1018

R1/8

19,5

Unequal

C016C1028

R1/4

19,5

Model

ØA

Ø A1

C016C1038

R3/8

19,5

C00630604

37,5

33,5

C016C1048

R1/2

19,5

C00630806

35,5

C016C1228

R1/4

C00631008

44,5

38,5

C016C1238

R3/8

C00631210

39,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

C01671248 C01671638

213

C01671048 C01671218

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Swivel tee adaptor C0167

PNEUFIT® C SERIES

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Stem side tee C0064

Metric Range

Swivel side tee adaptor C0268

E øA

øA

øA1

Equal

Model

ØA

Ø A1

Model

ØA

C00640400

20,5

C02680405

G 4,5

C00640600

52,5

21,5

17,5

C02680406

4,5

C00640800

23,5

18,5

C02680418

G1/8

C00641000

25,5

19,5

C02680428

G1/4

C00641200

Unequal Model

ØA

Ø A1

C00640604

C00640806

63,5

21,5

17,5

C00641008

69,5

23,5

18,5

C00641210

25,5

19,5

214

Swivel side tee adaptor C0168

G3/8

21,5

4,5

C02680606

21,5

4,5

C02680618

G1/8

21,5

C02680628

G1/4

21,5

C02680638

G3/8

21,5

C02680818

G1/8

23,5

C02680828

G1/4

23,5

C02680838

G3/8

23,5

C02680848

G1/2

23,5

C02681018

G1/8

25,5

C02681028

G1/4

25,5

C02681038

G3/8

25,5

C02681048

G1/2

25,5

G1/4

G3/8

C02681248

G1/2

C02681228 C02681238

R1/8

C01680428

R1/4

C01680438

R3/8

C01680618

R1/8

48,5

21,5

C01680628

R1/4

21,5

C01680638

R3/8

21,5

C01680648

R1/2

21,5

C01680818

R1/8

23,5

C01680828

R1/4

23,5

C01680838

R3/8

23,5

C01680848

R1/2

23,5

C01681018

R1/8

55,5

25,5

C01681028

R1/4

58,5

25,5

Union cross C0090

E øD

ØA

C01680418

Model

øA

Online at www.imi-precision.com

øA

C02680438 C02680605

C01681038

R3/8

59,5

25,5

Model

ØA

ØD

C01681048

R1/2

62,5

25,5

C00900400

36,5

3,3

6,5

10,5

C01681218

R1/8

C00900600

42,5

4,3

7,5

12,5

C01681228

R1/4

C00900800

4,3

14,5

C01681238

R3/8

C00901000

50,5

4,3

17,5

C01681248

R1/2

C00901200

4,3

20,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Banjo C0A51 C1

øA

L C1 G

ø A1

øA

øD

Model

ØA

Ø A1

Model

ØA

C00D30604

63,5

3,3

7,5

10,5

12,5

C0A510405

3,5

C00D30804

65,5

21,5

4,3

10,5

14,5

C0A510418

G1/8

30,5

14,5

C00D30806

71,5

22,5

4,3

9,5

12,5

14,5

C0A510428

G1/4

34,5

16,5

C00D31006

23,5

4,3

9,5

12,5

17,5

C0A510605

3,5

C00D31008

83,5

4,3

9,5

14,5

17,5

Male manifold C01D3 C

C1 øA

C0A510618

G1/8

14,5

C0A510628

G1/4

16,5

C0A510638

G3/8

38,5

32,5

20,5

C0A510818

G1/8

13,5

C0A510828

G1/4

C0A510838

G3/8

32,5

20,5

C0A510848

G1/2

39,5

C0A511028

G1/4

15,5

C0A511038

G3/8

32,5

19,5

C0A511048

G1/2

47,5

39,5

C0A511238

G3/8

32,5

18,5

C0A511248

G1/2

39,5

21,5

215

øA1

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Manifold union C00D3

L E

Ø A1

R1/8

10,5

C01D30428

R1/8

28,5

10,5

C01D30628

R1/4

82,5

12,5

C01D30838

R3/8

34,5

14,5

Banjo (with top port) C0D51/C0E51/C0F51/C0G51 C B1

øA

ØA

C01D30418

Stem manifold C00J3

ø A2

øA

ø A1

L E

Model

ØA

B & B1 C

C0D510405

3,5

C0E510418

R1/8

30,5

14,5

C0F510428

R1/4

34,5

35,5

C0D510605

3,5

C0E510618

R1/8

14,5

C0F510628

R1/4

35,5

C0G510638

R3/8

38,5

C0E510818

R1/8

15,5

Model

ØA

Ø A1

Ø A2

C0F510828

R1/4

35,5

C00J30604

84,5

10,5

C0G510838

R3/8

C00J30804

89,5

28,5

10,5

C0F511028

R1/4

35,5

C00J30806

95,5

28,5

12,5

C0G511038

R3/8

22,5

C00J31008

109,5

34,5

14,5

C0G511238

R3/8

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Model

Metric Range

3x Swivel elbow adaptor C0H51

C H

øA

ØA

Model

ØA

C0Q510418

R1/8

22,5

C0H510418

R1/8

22,5

C0Q510428

R1/4

27,5

C0H510428

R1/4

27,5

C0Q510438

R3/8

C0H510438

R3/8

C0Q510448

R1/2

C0H510448

R1/2

97,5

C0Q510618

R1/8

22,5

C0H510618

R1/8

22,5

C0Q510628

R1/4

27,5

C0H510628

R1/4

27,5

C0Q510638

R3/8

28,5

C0H510638

R3/8

28,5

C0Q510648

R1/2

C0H510648

R1/2

97,5

C0Q510818

R1/8

22,5

C0H510818

R1/8

22,5

C0Q510828

R1/4

28,5

27,5

C0H510828

R1/4

28,5

27,5

C0Q510838

R3/8

30,5

C0H510838

R3/8

30,5

C0Q510848

R1/2

C0H510848

R1/2

97,5

C0Q511018

R1/8

28,5

22,5

C0H511018

R1/8

28,5

22,5

C0Q511028

R1/4

30,5

27,5

C0H511028

R1/4

30,5

27,5

C0Q511038

R3/8

32,5

C0H511038

R3/8

32,5

C0Q511048

R1/2

34,5

C0H511048

R1/2

97,5

34,5

C0Q511228

R1/4

27,5

C0H511228

R1/4

27,5

C0Q511238

R3/8

C0H511238

R3/8

C0Q511248

R1/2

C0H511248

R1/2

87,5

3x Swivel elbow adaptor C0C51

C J

Online at www.imi-precision.com

2x Swivel elbow adaptor C0B51

216

Model

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

2x Swivel elbow adaptor C0Q51

PNEUFIT® C SERIES

øA

Model

ØA

Model

ØA

C0B510418

G1/8

20,5

C0C510418

G1/8

20,5

C0B510428

G1/4

6,5

25,5

C0C510428

G1/4

6,5

25,5

C0B510438

G3/8

6,5

C0C510438

G3/8

6,5

C0B510448

G1/2

29,5

C0C510448

G1/2

29,5

C0B510618

G1/8

20,5

C0C510618

G1/8

20,5

C0B510628

G1/4

6,5

25,5

C0C510628

G1/4

6,5

25,5

C0B510638

G3/8

28,5

6,5

C0C510638

G3/8

28,5

6,5

C0B510648

G1/2

29,5

C0C510648

G1/2

29,5

C0B510818

G1/8

20,5

C0C510818

G1/8

20,5

C0B510828

G1/4

28,5

6,5

25,5

C0C510828

G1/4

28,5

6,5

25,5

C0B510838

G3/8

30,5

6,5

C0C510838

G3/8

30,5

6,5

C0B510848

G1/2

29,5

C0C510848

G1/2

29,5

C0B511018

G1/8

28,5

20,5

C0C511018

G1/8

28,5

20,5

C0B511028

G1/4

30,5

6,5

25,5

C0C511028

G1/4

30,5

6,5

25,5

C0B511038

G3/8

32,5

6,5

C0C511038

G3/8

32,5

6,5

C0B511048

G1/2

34,5

29,5

C0C511048

G1/2

34,5

29,5

C0B511228

G1/4

6,5

25,5

C0C511228

G1/4

6,5

25,5

C0B511238

G3/8

6,5

C0C511238

G3/8

6,5

C0B511248

G1/2

29,5

C0C511248

G1/2

29,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Single universal tee C0A71

øA

Model

ØA

Model

ØA

C0N710418

R1/8

25,5

C0A710418

G1/8

H 20,5

C0N710428

R1/4

50,5

27,5

C0A710428

G1/4

50,5

6,5

25,5

C0N710438

R3/8

54,5

C0A710438

G3/8

54,5

6,5

C0N710448

R1/2

58,5

C0A710448

G1/2

58,5

45,5

29,5

C0N710618

R1/8

48,5

22,5

C0A710618

G1/8

48,5

20,5

C0N710628

R1/4

27,5

C0A710628

G1/4

6,5

25,5

C0N710638

R3/8

C0A710638

G3/8

6,5

C0N710648

R1/2

58,5

C0A710648

G1/2

58,5

45,5

29,5

C0N710818

R1/8

22,5

C0A710818

G1/8

20,5

C0N710828

R1/4

55,5

27,5

C0A710828

G1/4

55,5

6,5

25,5

C0N710838

R3/8

59,5

C0A710838

G3/8

59,5

6,5

C0N710848

R1/2

63,5

C0A710848

G1/2

62,5

45,5

29,5

C0N711018

R1/8

22,5

C0A711018

G1/8

20,5

C0N711028

R1/4

59,5

27,5

C0A711028

G1/4

59,5

6,5

25,5

R3/8

63,5

C0A711038

G3/8

63,5

6,5

R1/2

C0A711048

G1/2

45,5

29,5

C0N711228

R1/4

27,5

C0A711228

G1/4

6,5

25,5

C0N711238

R3/8

C0A711238

G3/8

6,5

C0N711248

R1/2

74,5

C0A711248

G 1/2

74,5

45,5

29,5

Double universal tee C0B71

C H

øA

Model

ØA

Model

ØA

C0Q710418

R1/8

22,5

C0B710418

G1/8

20,5

C0Q710428

R1/4

50,5

27,5

C0B710428

G1/4

50,5

6,5

25,5

C0Q710438

R3/8

54,5

C0B710438

G3/8

54,5

6,5

C0Q710448

R1/2

58,5

C0B710448

G1/2

69,5

58,5

29,5

C0Q710618

R1/8

48,5

22,5

C0B710618

G1/8

48,5

20,5

C0Q710628

R1/4

27,5

C0B710628

G1/4

6,5

25,5

C0Q710638

R3/8

C0B710638

G3/8

6,5

C0Q710648

R1/2

58,5

C0B710648

G1/2

69,5

58,5

29,5

C0Q710818

R1/8

22,5

C0B710818

G1/8

20,5

C0Q710828

R1/4

55,5

27,5

C0B710828

G1/4

55,5

6,5

25,5

C0Q710838

R3/8

59,5

C0B710838

G3/8

59,5

6,5

C0Q710848

R1/2

62,5

C0B710848

G1/2

69,5

62,5

29,5

C0Q711018

R1/8

22,5

C0B711018

G1/8

20,5

C0Q711028

R1/4

59,5

27,5

C0B711028

G1/4

59,5

6,5

25,5

C0Q711038

R3/8

63,5

C0B711038

G3/8

63,5

6,6

C0Q711048

R1/2

C0B711048

G1/2

69,5

29,5

C0Q711228

R1/4

27,5

C0B711228

G1/4

6,5

25,5

C0Q711238

R3/8

C0B711238

G3/8

6,5

C0Q711248

R1/2

74,5

C0B711248

G 1/2

69,5

74,5

29,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Double universal tee C0Q71

217

C0N711038 C0N711048

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Single universal tee C0N71

Metric Range

Branch adaptor C0A70 E

øA

Model

ØA

Model

ØA

C0N700618

R1/8

14,5

12,5

C0A700405

19,5

3,6

10,5

C0N700828

R1/4

28,5

18,5

C0A700618

G1/8

23,5

4,5

12,5

C0N701028

R1/4

19,5

17,5

C0A700828

G1/4

28,5

17,5

C0N701038

R3/8

32,5

20,5

17,5

C0A701028

G1/4

17,5

C0N701238

R3/8

32,5

20,5

C0A701038

G3/8

32,5

17,5

C0N701248

R1/2

39,5

36,5

25,5

20,5

C0A701238

G3/8

32,5

22,5

20,5

C0A701248

G1/2

36,5

7,5

20,5

Triple universal tee C0H71

Triple universal tee C0C71

218

C H

Online at www.imi-precision.com

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Branch adaptor C0N70

PNEUFIT® C SERIES

øA

Model

ØA

Model

ØA

C0H710418

R1/8

22,5

C0C710418

G1/8

20,5

C0H710428

R1/4

50,5

27,5

C0C710428

G1/4

50,5

6,5

25,5

C0H710438

R3/8

54,5

C0C710438

G3/8

54,5

6,5

C0H710448

R1/2

97,5

58,5

C0C710448

G1/2

58,5

29,5

C0H710618

R1/8

48,5

22,5

C0C710618

G1/8

48,5

20,5

C0H710628

R1/4

27,5

C0C710628

G1/4

6,5

25,5

C0H710638

R3/8

C0C710638

G3/8

6,5

C0H710648

R1/2

97,5

58,5

C0C710648

G1/2

58,5

29,5

C0H710818

R1/8

22,5

C0C710818

G1/8

20,5

C0H710828

R1/4

55,5

27,5

C0C710828

G1/4

55,5

6,5

25,5

C0H710838

R3/8

59,5

C0C710838

G3/8

59,5

6,5

C0H710848

R1/2

97,5

62,5

C0C710848

G1/2

62,5

29,5

C0H711018

R1/8

22,5

C0C711018

G1/8

20,5

C0H711028

R1/4

59,5

27,5

C0C711028

G1/4

59,5

6,5

25,5

C0H711038

R3/8

63,5

C0C711038

G3/8

63,5

6,6

C0H711048

R1/2

97,5

C0C711048

G1/2

29,5

C0H711228

R1/4

27,5

C0C711228

G1/4

6,5

25,5

C0H711238

R3/8

C0C711238

G3/8

6,5

C0C711248

G 1/2

74,5

29,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

øA

G1 G

øA

Model

ØA

G / G1

Model

ØA

G / G1

C0E7J0618

R1/8

14,5

12,5

C0D7K0405

19,5

3,5 / 7

10,5

C0F7J0828

R1/4

35,5

28,5

18,5

C0E7K0618

G1/8

12,5

C0F7J1028

R1/4

35,5

19,5

17,5

C0F7K0828

G1/4

35,5

17,5

14,5

C0G7J1038

R3/8

20,5

17,5

C0F7K1028

G1/4

35,5

17,5

C0G7J1238

R3/8

20,5

C0G7K1038

G3/8

17,5

C0H7J1248

R1/2

36,5

25,5

20,5

C0G7K1238

G3/8

17,5

20,5

C0H7K1248

G1/2

20,5

Double branch adaptor C0B70

219

Double branch adaptor C0Q70

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Branch adaptor (female) C0*7K

Branch adaptor (female) C0*7J

C H

E øA

øA

Model

ØA

Model

ØA

C0Q700418

R1/8

22,5

C0B700418

G1/8

20,5

C0Q700428

R1/4

27,5

C0B700428

G1/4

6,5

25,5

C0Q700438

R3/8

C0B700438

G3/8

6,5

C0Q700448

R1/2

30,5

C0B700448

G1/2

69,5

30,5

29,5

C0Q700618

R1/8

22,5

C0B700618

G1/8

20,5

C0Q700628

R1/4

27,5

C0B700628

G1/4

6,5

25,5

C0Q700638

R3/8

28,5

C0B700638

G3/8

28,5

6,5

C0Q700648

R1/2

C0B700648

G1/2

69,5

29,5

C0Q700818

R1/8

22,5

C0B700818

G1/8

20,5

C0Q700828

R1/4

30,5

27,5

C0B700828

G1/4

30,5

6,5

25,5

C0Q700838

R3/8

30,5

C0B700838

G3/8

30,5

6,5

C0Q700848

R1/2

32,5

C0B700848

G1/2

69,5

32,5

29,5

C0Q701018

R1/8

28,5

22,5

C0B701018

G1/8

28,5

20,5

C0Q701028

R1/4

30,5

27,5

C0B701028

G1/4

30,5

6,5

25,5

C0Q701038

R3/8

32,5

C0B701038

G3/8

32,5

6,5

C0Q701048

R1/2

C0B701048

G1/2

69,5

29,5

C0Q701228

R1/4

27,5

C0B701228

G1/4

6,5

25,5

C0Q701238

R3/8

C0B701238

G3/8

6,5

C0Q701248

R1/2

C0B701248

G 1/2

69,5

29,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Metric Range

øA

> C1

< C1

Model

ØA

> C1

< C1

R1/8

30,5

14,5

C0K510305

21,5

9,5

3,5

C0TA00428

R1/4

34,5

45,5

C0K510405

3,5

C0TA00618

R1/8

14,5

C0K510418

G1/8

30,5

C0TA00628

R1/4

45,5

C0K510428

G1/4

34,5

45,5

C0TA00638

R3/8

38,5

46,5

C0K510605

3,5

C0TA00818

R1/8

15,5

C0K510618

G1/8

C0TA00828

R1/4

45,5

C0K510628

G1/4

45,5

C0TA00838

R3/8

46,5

C0K510638

G3/8

38,5

46,5

C0TA00848

R1/2

C0K510818

G1/8

C0TA01028

R1/4

45,5

C0K510828

G1/4

45,5

C0TA01038

R3/8

46,5

22,5

C0K510838

G3/8

46,5

C0TA01048

R1/2

47,5

C0K510848

G1/2

22,5

C0TA01228

R1/4

45,5

C0K511028

G1/4

45,5

C0TA01238

R3/8

46,5

C0K511038

G3/8

46,5

19,5

C0TA01248

R1/2

C0K511048

G1/2

47,5

22,5

C0K511228

G1/4

45,5

C0K511238

G3/8

46,5

C0K511248

G1/2

Triple branch adaptor C0H70

Triple branch adaptor C0C70

C H

Online at www.imi-precision.com

ØA

C0TA00418

220

Model

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Banjo flow control (out) C0K51

Banjo flow control (out) C0TA0

PNEUFIT® C SERIES

øA øA

Model

ØA

Model

ØA

C0H700418

R1/8

22,5

C0C700418

G1/8

20,5

C0H700428

R1/4

27,5

C0C700428

G1/4

6,5

25,5

C0H700438

R3/8

C0C700438

G3/8

6,5

C0H700448

R1/2

30,5

C0C700448

G1/2

30,5

29,5

C0H700618

R1/8

22,5

C0C700618

G1/8

20,5

C0H700628

R1/4

27,5

C0C700628

G1/4

6,5

25,5

C0H700638

R3/8

28,5

C0C700638

G3/8

28,5

6,5

C0H700648

R1/2

C0C700648

G1/2

29,5

C0H700818

R1/8

22,5

C0C700818

G1/8

20,5

C0H700828

R1/4

30,5

27,5

C0C700828

G1/4

30,5

6,5

25,5

C0H700838

R3/8

30,5

C0C700838

G3/8

30,5

6,5

C0H700848

R1/2

32,5

C0C700848

G1/2

32,5

29,5

C0H701018

R1/8

28,5

22,5

C0C701018

G1/8

28,5

20,5

C0H701028

R1/4

30,5

27,5

C0C701028

G1/4

30,5

6,5

25,5

C0H701038

R3/8

32,5

C0C701038

G3/8

32,5

6,5

C0H701048

R1/2

C0C701048

G1/2

29,5

C0H701228

R1/4

27,5

C0C701228

G1/4

6,5

25,5

C0H701238

R3/8

C0C701238

G3/8

6,5

C0H701248

R1/2

C0C701248

G 1/2

29,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

Shrouded banjo (out) C0TB0

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Banjo flow control (in) C0SA0

øA

2 2

C1 max. 40

R1/8

30,5

14,5

C0SA00428

R1/4

34,5

45,5

C0SA00618

R1/8

14,5

C0SA00628

R1/4

45,5

C0SA00638

R3/8

46,5

C0SA00818

R1/8

15,5

C0SA00828

R1/4

45,5

C0SA00838

R3/8

46,5

C0SA00848

R1/2

C0SA01028

R1/4

45,5

C0SA01038

R3/8

46,5

22,5

C0SA01048

R1/2

47,5

C0SA01228

R1/4

45,5

C0SA01238

R3/8

46,5

C0SA01248

R1/2

ØA

C0TB00418

R1/8

30,5

31,5

C0TB00428

R1/4

34,5

18,5

C0TB00618

R1/8

31,5

C0TB00628

R1/4

18,5

C0TB00638

R3/8

38,5

43,5

C0TB00818

R1/8

31,5

16,5

C0TB00828

R1/4

19,5

C0TB00838

R3/8

43,5

C0TB00848

R1/2

26,5

C0TB01028

R1/4

C0TB01038

R3/8

43,5

23,5

C0TB01048

R1/2

47,5

26,5

C0TB01228

R1/4

22,5

C0TB01238

R3/8

43,5

C0TB01248

R1/2

Shrouded banjo (out) C0KB0

Model

ØA

> C1

< C1

Model

ØA

C0L510305

21,5

9,5

3,5

C0KB00405

10,5

3,5

C0L510405

3,5

C0KB00418

G1/8

30,5

31,5

C0L510418

G1/8

30,5

C0KB00428

G1/4

34,5

17,5

C0L510428

G1/4

34,5

45,5

C0KB00605

11,5

3,5

C0L510605

3,5

C0KB00618

G1/8

31,5

C0L510618

G1/8

C0KB00628

G1/4

17,5

C0L510628

G1/4

45,5

C0KB00638

G3/8

38,5

43,5

C0L510638

G3/8

46,5

C0KB00818

G1/8

31,5

C0L510818

G1/8

C0KB00828

G1/4

C0L510828

G1/4

45,5

C0KB00838

G3/8

43,5

C0L510838

G3/8

46,5

C0KB00848

G1/2

C0L510848

G1/2

22,5

C0KB01028

G1/4

C0L511028

G1/4

45,5

C0KB01038

G3/8

43,5

C0L511038

G3/8

46,5

19,5

C0KB01048

G1/2

47,5

C0L511048

G1/2

47,5

22,5

C0KB01228

G1/4

20,5

C0L511228

G1/4

45,5

C0KB01238

G3/8

43,5

C0L511238

G3/8

46,5

C0KB01248

G1/2

21,5

C0L511248

G1/2

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Banjo flow control (in) C0L51

Model

221

C0SA00418

C1 min. 35

øA

ØA

øA

Model

Metric Range

Swivel speed control (out) C0K56 øA

øA

2 1

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Swivel speed control (out) C0T56

PNEUFIT® C SERIES

1 B 360°

360°

222

Online at www.imi-precision.com

Model

ØA

C*1)

Model

ØA

C*1)

C0T560418

R1/8

35/40

20,5

14,5

C0K560405

27/30

20,5

12,5

3,6

9,5

C0T560428

R1/4

4045,5

20,5

18,5

C0K560418

G1/8

35/40

20,5

14,5

15,5

C0T560618

R1/8

35/40

15,5

C0K560428

G1/4

40/45,5

20,5

17,5

C0T560628

R1/4

40/45,5 26

20,5

18,5

C0K560605

27/30

22,5

13,5

3,6

9,5

C0T560638

R3/8

47/55

23,5

21,5

C0K560618

G1/8

35/40

15,5

C0T560818

R1/8

35/40

25,5

15,5

C0K560628

G1/4

40/45,5

20,5

17,5

C0T560828

R1/4

40/45,5 29

19,5

18,5

C0K560638

G3/8

47/55

23,5

21,5

C0T560838

R3/8

47/55

24,5

C0K560818

G1/8

35/40

25,5

14,5

C0T560848

R1/2

53/60

26,5

C0K560828

G1/4

40/45,5

19,5

17,5

C0T561028

R1/4

40/45,5 31

20,5

18,5

C0K560838

G3/8

47/55

24,5

C0T561038

R3/8

47/55

24,5

C0K560848

G1/2

53/60

26,5

C0T561048

R1/2

53/60

26,5

C0K561028

G1/4

40/45,5

20,5

17,5

C0T561228

R1/4

40/45,5 33,5

18,5

C0K561038

G3/8

47/55

24,5

C0T561238

R3/8

47/55

34,5

24,5

C0K561048

G1/2

53/60

26,5

C0T561248

R1/2

53/60

26,5

C0K561228

G1/4

40/45,5

33,5

17,5

C0K561238

G3/8

47/55

34,5

24,5

C0K561248

G1/2

53/60

26,5

* min/max

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

360°

øK

øA

12 øL

Note: Pilot check is not suitable for extreme high cycling applications.

øE2

B E3

ØA

C2*1)

Ø E2

ØK

ØL

C01GN0618

R1/8

50,6/55,4 12,9

14,2

14,3

24,2

8,5

12,5

C01GN0628

R1/4

R1/8

49,1

25,9

57,1/61,9 15,6

19,3

18,7

18,8

30,1

15,3

C01GN0818

R1/8

24,9

50,6/55,4 12,6

15,4

14,3

24,2

8,5

14,8

C01GN0828

R1/4

R1/8

49,1

28,3

57,1/61,9 15,9

18,3

18,7

18,8

30,1

14,8

15,3

C01GN0838

R3/8

R1/8

56,9

29,3

67,2/72,2 19,1

23,3

22,8

37,1

22,5

20,2

C01GN1038

R3/8

R1/8

56,9

31,7

67,2/72,2 19,1

23,3

22,8

37,1

22,5

17,5

20,2

C01GN1048

R1/2

R1/4

70,8

33,1

81,3/87

25,6

26,3

29,1

28,7

47,4

13,5

17,5

27,2

C01GN1238

R3/8

R1/8

56,9

34,4

67,2/72,2 19,1

23,3

22,8

37,1

22,5

20,5

20,2

C01GN1248

R1/2

R1/4

70,8

35,8

81,3/87

26,3

29,1

28,7

47,4

13,5

20,5

27,2

25,6

360°

øK

Online at www.imi-precision.com

Speed control and pilot check C02GN

øA

øL

øE2

B E3

Note: Pilot check is not suitable for extreme high cycling applications. Model

ØA

C2*1)

C02GN0618

G1/8

C02GN0628

G1/4

G1/8

49,1

C02GN0818

G1/8

C02GN0828

G1/4

G1/8

C02GN0838

G3/8

C02GN1038

C02GN1048

Ø E2

ØK

ØL

50,6/55,4 12,9

14,2

14,3

24,2

8,5

12,5

1 10

25,9

57,1/61,9 15,6

19,3

18,7

18,8

30,1

6,5

9,5

15,3

24,9

50,6/55,4 12,6

15,4

14,3

24,2

8,5

14,8

49,1

28,3

57,1/61,9 15,9

18,3

18,7

18,8

30,1

6,5

9,5

14,8

15,3

G1/8

56,9

29,3

67,2/72,2 19,1

23,3

22,8

37,1

9,5

22,5

20,2

G3/8

G1/8

56,9

31,7

67,2/72,2 19,1

23,3

22,8

37,1

9,5

22,5

17,5

20,2

G1/2

G1/4

70,8

33,1

81,3/78,5 25,6

26,3

29,1

28,7

47,4

8,5

17,5

27,2

C02GN1238

G3/8

G1/8

56,9

34,4

67,2/72,2 19,1

23,3

22,8

37,1

9,5

22,5

20,5

20,2

C02GN1248

G1/2

G1/4

70,8

35,8

81,3/78,5 25,6

26,3

29,1

28,7

47,4

8,5

20,5

27,2

*1) min./max. control flow see page 5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

223

Model

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Speed control and pilot check C01GN

Metric Range

C E D

øK

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

In-line flow control C00GE

PNEUFIT® C SERIES

Model

ØA

> C1

< C1

ØK

C00GE0400

3,3

13,5

C00GE0600

39,5

4,4

20,5

17,5

C00GE0800

55,5

37,5

4,4

C00GE1000

4,4

17,5

C00GE1200

26,5

47,5

53,5

4,4

20,5

25,5

Control flow see page 4

In-line and panel mounting flow control C00GP C

224

øK

øA

Online at www.imi-precision.com

Model

ØA

> C1

< C1

ØK

Panel hole

Panel thickness

C00GP0400

35,5

5,5

3,2

15,5

13,5

C00GP0600

49,5

48,5

4,3

20,5

17,5

C00GP0800

56,5

47,5

8,5

4,3

C00GP1000

53,5

61,5

10,5

4,3

27,5

17,5

C00GP1200

26,5

73,5

57,5

64,5

4,4

32,5

20,5

25,5

Control flow see page 4

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

IIn-line non-return valve (Aluminium) C00GL

øA

Model

ØA

Model

ØA

C00GL0400

C00GL1000

C00GL0600

47,5

C00GL1200

C00GL0800

55,5

In-line non-return valve (in), taper thread C01G2

In-line non-return valve (out), taper thread C01G3 C

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

In-line non-return valve (PBT) C00GL

OUT

225

Model

ØA

C01G20418

R1/8

27,5

Model

C01G20618

R1/8

32,5

C01G20828

R1/4

37,5

Weight (g) 11

C01G30418

R1/8

27,5

C01G30618

R1/8

32,5

C01G30828

R1/4

37,5

In-line non-return valve (out), ISO G thread C02G3 C

øA

OUT

Model

ØA

Model

ØA

C02G20405

31,5

3,5

C02G30405

31,5

G 3,5

C02G20418

G1/8

27,5

C02G30418

G1/8

27,5

C02G20618

G1/8

32,5

C02G30618

G1/8

32,5

C02G20828

G1/4

C02G30828

G1/4

C02G21038

G3/8

C02G31038

G3/8

C02G21248

G1/2

60,5

C02G31248

G1/2

60,5

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

In-line non-return valve (in), ISO G thread C02G2

ØA

Metric Range

No air flow when tubing is removed - air flow is restored when tubing is inserted

Swivel elbow C014J

øA

Straight adaptor C0124 øA

B G

Model

ØA

Model

ØA

C01240418

R1/8

C014J0418

R1/8

27,5

G 5

C01240618

R1/8

C014J0618

R1/8

C01240628

R1/4

C014J0628

R1/4

30,5

6,5

C01240828

R1/4

33,5

C014J0818

R1/8

34,5

41,5

6,5

C01240838

R3/8

33,5

C014J0828

R1/4

6,5

C01241028

R1/4

35,5

C014J1028

R1/4

26,5

6,5

C01241038

R3/8

35,5

C014J1038

R3/8

6,5

C01241048

R1/2

35,5

C014J1048

R1/2

37,5

R1/4

C014J1238

R3/8

53,5

6,5

R3/8

C014J1248

R1/2

41,5

51,5

C01241248

R1/2

Straight adaptor C0224

Swivel elbow C024J

øA

Model

ØA

Model

ØA

C02240418

G1/8

25,5

C024J0405

20,5

29,5

C02240618

G1/8

C024J0418

G1/8

27,5

C02240628

G1/4

6,5

C024J0605

22,5

C02240828

G1/4

6,5

C024J0618

G1/8

C02240838

G3/8

6,5

C024J0628

G1/4

30,5

6,5

C02241028

G1/4

6,5

C024J0828

G1/4

34,5

41,5

6,5

C02241038

G3/8

36,5

6,5

C024J0838

G3/8

6,5

C02241048

G1/2

37,5

C024J1028

G1/4

26,5

6,5

C02241228

G1/4

43,5

6,5

C024J1038

G3/8

6,5

C02241238

G3/8

43,5

6,5

C024J1048

G1/2

37,5

C02241248

G1/2

Straight union C002J

C024J1238

G3/8

53,5

6,5

C024J1248

G1/2

41,5

51,5

øA

Online at www.imi-precision.com

226

C01241228 C01241238

øA

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Self sealing fittings STOP

PNEUFIT® C SERIES

Model

ØA

C002J0400

C002J0600

C002J0800

53,5

C002J1000

C002J1200

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

PNEUFIT® C SERIES

Metric Range

3/2 Shut-off valves C01GJ

C E ø 4,3

C E

Exhaust bore hole

øA

G 1

ø 4,3

Model

ØA

C1 *

C01GJ0618

R1/8

40,5

18,5

C01GJ0628

R1/4

40,5

18,5

Model

C01GG1818

R1/8

40,5

18,5

C01GJ0638

R3/8

40,5

18,5

C01GG2828

R1/4

40,5

18,5

C01GJ0818

R1/8

40,5

27,5

18,5

C01GJ0828

R1/4

40,5

27,5

18,5

C01GJ0838

R3/8

40,5

27,5

18,5

C01GJ1028

R1/4

70,5

21,5

C01GJ1038

R3/8

71,5

21,5

C01GJ1048

R1/2

74,5

21,5

C01GJ1228

R1/4

75,5

21,5

C01GJ1238

R3/8

76,5

21,5

C01GJ1248

R1/2

79,5

21,5

C01GG3838 C01GG4848

R3/8

R1/2

21,5

3/2 Shut-off valves C01GH C

227

* see drawing C01GG series E

øA

ø 4,3

3/2 Shut-off valves C01GF

C E

ØA

C1 *

C01GH0618

R1/8

40,5

18,5

C01GH0628

R1/4

40,5

18,5

C01GH0638

R3/8

40,5

18,5

Model

ØA

C1 *

C01GH0818

R1/8

40,5

27,5

18,5

C00GF0600

52,5

40,5

18,5

C01GH0828

R1/4

40,5

27,5

18,5

C00GF0800

40,5

18,5

C01GH0838

R3/8

40,5

27,5

18,5

C00GF1000

21,5

C01GH1028

R1/4

21,5

C00GF1200

68,5

21,5

C01GH1038

R3/8

71,5

21,5

C01GH1048

R1/2

74,5

21,5

C01GH1228

R1/4

75,5

21,5

C01GH1238

R3/8

76,5

21,5

C01GH1248

R1/2

79,5

21,5

øA

* see drawing C01GG series

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Model

Online at www.imi-precision.com

ø 4,3

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

3/2 Shut-off valves C01GG

EXHAUST GUARD 0613422, 0613423

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Suitable for outdoor use • Protects against contamination and moisture penetration • Compact, efficient, lightweight • Can be screwed directly into exhaust ports • Suitable for BSP or NPT thread

Technical Data

Materials

Medium: Lubricated or non-lubricated compressed air, inert gases

Housing: POM ‘O’-rings: VMQ

Operation: The non-return function protects the spring chamber of pneumatic actuators in particular against aggressive ambient air. Operating pressure: 10 bar max. Ambient/Media temperature: -55°C ... +80°C

Dimensions

Example of use

C B

228 3 2

øD

Online at www.imi-precision.com

Model

Suitable for

ØD

Weight

0613422 0613423

1/4” 1/2”

G1/4, 1/4 NPT G1/2, 1/2 NPT

10 12

26,5 33,5

21 29

5g 11 g

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

LOW PRESSURE ROTOWINKS

Pneumatic Visual Indicators

Technical Data

Materials

• Wide angle of visibility

Medium: Compressed air, filtered, dry or lubricated

Moulded plastic body and internal components, steel spring, synthetic rubber diaphragm

• Contrasting colour combinations for positive identification • Range of colours available

Operation: Visual indicator, diaphragm operated Mounting: Panel, fits standard Æ17 mm knockout hole

• Sealed units

Connection: 10-32 UNF connector for 1⁄16" i.d. tube supplied Operating Pressure: 0,7 … 1 bar Operating Temperature: +2°C* … +66°C *Consult our Technical Service for use below +2°C

Dimensions 10-32 UNF

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Indicate the presence or absence of a pneumatic signal

229

6 max.

Online at www.imi-precision.com

17,5 21

Models Model

Unactuated colour

Actuated colour

Weight (Kg)

Spares kit

5VS-101-000

Black

Red

0,007

Not available

5VS-102-000

Black

Green

0,007

Not available Not available

5VS-103-000

Black

Amber

0,007

5VS-110-000

Red

Black

0,007

Not available

5VS-112-000

Red

Green

0,007

Not available

5VS-120-000

Green

Black

0,007

Not available

5VS-121-000

Green

Red

0,007

Not available

5VS-130-000

Amber

Black

0,007

Not available

The colour in the actuated condition is indicated by a dot on the body.

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Pneumatic Visual Indicators G1/8

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Indicate the presence or absence of a pneumatic signal

Technical Data

Materials

• Wide angle of visibility

Medium: Compressed air, filtered, dry or lubricated

Moulded plastic body and internal components, brass connector, steel spring, synthetic rubber diaphragm.

• Contrasting colour combinations for positive identification • Range of colours available

Operation: Visual indicator, diaphragm operated Mounting: Panel Connection: G1⁄8 Operating Pressure: 0,7 … 8,6 bar full actuation 0 … 0,14 bar full de-actuation Operating Temperature: +2°C* … +66°C *Consult our Technical Service for use below +2°C

Dimensions 16

230

G 1/8

HIGH PRESSURE ROTOWINKS

7 max.

16 31 10

Online at www.imi-precision.com

Model

Unactuated colour

Actuated colour

Weight (Kg)

5VS-401-800

Black

Red

0,035

5VS-402-800

Black

Green

0,035

5VS-403-800

Black

Amber

0,035

5VS-410-800

Red

Black

0,035

5VS-412-800

Red

Green

0,035

5VS-420-800

Green

Black

0,035

5VS-421-800

Green

Red

0,035

5VS-430-800

Amber

Black

0,035

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

AIR PREPARATION ACCESSORIES

Gauges, Auto-drain, Drip leg drain

• Monitor pressures in a compressed air system for optimum efficiency • Choice of pressure ranges • Direct or panel mounted

Standard Steel and plastic Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Centre Back Panel Mounted Panel Mounted Panel Mounted Panel Mounted Panel Mounted Panel Mounted Panel Mounted Panel Mounted Panel Mounted Bottom Bottom Bottom Bottom Bottom Bottom Bottom

R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 G1/8A G1/8A G1/8A G1/8A G1/8A G1/4A G1/4A G1/4A G1/4A R1/8 R1/8 R1/8 R1/8 R1/8 G1/4A G1/4A

DRIP LEG DRAIN • Fully automatic unit that can drain liquid from low points in compressed air systems

Dimensions Bottom

Panel mounting

ø 40

Model

Port size

Bowl

17-816-998 17-816-999

G1/2 G1/2

Metal Transparent

ø 50 & 63

28 (23)

51 61 50 (40)

R 1/8 (G1/8A) 30 59

Centre back

50 (63)

Stainless Steel Model

Pressure range (bar)

Nominal diameter (mm)

Connection type / mounting

Port connection

18-015-844 18-015-913 18-015-909 18-015-905

0 … 10 0…6 0 … 10 0 … 25

40 40 40 40

Centre Back Centre Back Centre Back Centre Back

1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT

AUTO-DRAIN • Spare parts for filters and filter/regulators

Models Models

9,5 max

49 (62)

40 40 40 40 40 40 40 40 50 50 50 50 50 63 63 63 63 63 63 40 40 40 50 50 63 63 63 63 50 50 50 50 50 63 63

R 1/8

0…1 0 … 1,6 0 … 2,5 0…4 0…6 0 … 10 0 … 16 0 … 25 0 … 1,6 0…4 0…6 0 … 10 0 … 25 0…1 0 … 2,5 0…6 0 … 10 0 … 16 0 … 25 0 … 1,6 0…6 0 … 10 0…6 0 … 10 0 … 1,6 0…6 0 … 10 0 … 16 0 … 1,6 0…4 0…6 0 … 10 0 … 25 0 … 10 0 … 25

3,6

18-015-887 18-015-991 18-015-886 18-015-990 18-015-885 18-015-989 18-015-884 18-015-908 18-015-010 18-015-011 18-015-012 18-015-013 18-015-014 18-015-893 18-015-892 18-015-891 18-015-856 18-015-855 18-015-888 18-015-879 18-015-878 18-015-877 18-015-858 18-015-857 18-015-883 18-015-882 18-015-852 18-015-851 18-015-024 18-015-025 18-015-026 18-015-027 18-015-028 18-015-854 18-015-853

70 (56)

Port connection

12,7 (10)

Connection type / mounting

R 1/8

Nominal diameter (mm)

Model

Bowl

4000-50R 4000-51R 3000-97 6000-50

Excelon 72, Excelon Pro Excelon 73 Excelon 74 Olympian 64, 68

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Online at www.imi-precision.com

Pressure range (bar)

231

Model

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

GAUGES

T65 G1/8 & G1/4

Materials

• Can be used to perform an ‘OR’ logic function

Medium: Compressed air, filtered, lubricated or non-lubricated, inert gas

Body: Zinc alloy

• Can be combined to operate from three or more sources

Operation: Shuttle valve (‘OR’ logic function) Operating pressure:

• Valves can be ganged together

Ball: NBR Valve seat: Brass

0,7 … 10 bar

Port size:

G 1/8, G 1/4

Mounting: Line mounted Ambient temperature: -20°C … +80°C max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C

Dimensions G øH

232

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Technical Data

• Allow two independent signal sources to be connected to a common pilot line

SHUTTLE VALVE

Online at www.imi-precision.com

Model

Port size

Flow factor C *1)

Flow at 6 - 1 bar (dm3/min)

T65C1800

G 1/8

1,7

0,42

412

T65C2800

G 1/4

2,6

0,64

631

*1) Measured in dm3/(s.bar).

Models Model

ØH

T65C1800

G1/8

5,25

T65C2800

G1/4

5,25

Not suitable for use directly in Air Brake circuit without necessary circuit protection. Please contact our technical department for more information.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

TUBING & HOSES

Ø 3 … 16 mm O/D

Technical Data

Materials

• In addition to general industrial applications Nylon is suitable for use on air braking systems of commercial vehicles and conforms to DIN 74324. (Applicable sizes; 6, 8, 10, 12, 16 mm O/D)

Medium: Compressed air. Consult our Technical Service for use with other fluids.

Nylon tube: Nylon (polyamide) type PA12 fully plasticised and light stabilised. Conforms to material standard of DIN 74324

Operating pressure: See table below

Polyurethane tube: Is light stabilised and has a hardness of Shore D 52 (98 Shore A)

• 25 metre lengths supplied in cartons providing good protection and easy storage • Polyurethane offers excellent mechanical properties and industry leading flexibility

Maximum operating pressures and bend radi O/D mm

Nylon

Polyurethane

–

Min. bend radius mm

Nylon

Polyurethane

–

Maximum continuous working temperature: nylon +80°C, polyurethane +60°C. * Multiply by factors in table below for use at higher temperatures.

Working temperature

Factor (Nylon)

Factor (Polyurethane)

-40°C … +20°C

+30°C

0,83

0,85

+40°C

0,75

0,7

+50°C

0,64

0,6

+60°C

0,57

0,5

+80°C

0,47

–

Online at www.imi-precision.com

Operating pressure/temperature conversion factors

To calculate working pressures at various temperatures, multipy working pressure at -40°C … +20°C by factor given in table. Maximum continuous working temperature: Nylon +80°C, Polyurethane +60°C.

Tube sizes (metric) O/D mm

Nylon

–

•

Polyurethane

•

–

•

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

233

Max. pressure (bar)* at -40°C … +20°C

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Available in a range of colours for ease of identification

TUBING & HOSES Ø 3 … 16 mm O/D

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Nylon tube

234

Colour

Length (m) O/D I/D tube 4/2,5*

5/3*

6/4

8/6

10/7,5

12/9

14/11*

16/12

Natural

PA2-0004025C

PA2-0005025C

PA2-0006025C

PA2-0008025C

PA2-0010025C

PA2-0012025C

PA2-0014025C

PA2-0016025C

Natural

100

PA2-0004100

–

PA2-0006100

PA2-0008100

PA2-0010100

PA2-0012100

–

Red

PA2-0104025C

PA2-0105025C

PA2-0106025C

PA2-0108025C

PA2-0110025C

PA2-0112025C

PA2-0114025C

PA2-0116025C

Red

100

PA2-0104100

–

PA2-0106100

PA2-0108100

PA2-0110100

PA2-0112100

–

Green

PA2-0204025C

PA2-0205025C

PA2-0206025C

PA2-0208025C

PA2-0210025C

PA2-0212025C

PA2-0214025C

PA2-0216025C

Green

100

PA2-0204100

–

PA2-0206100

PA2-0208100

PA2-0210100

PA2-0212100

–

Yellow

PA2-0304025C

PA2-0305025C

PA2-0306025C

PA2-0308025C

PA2-0310025C

PA2-0312025C

PA2-0314025C

PA2-0316025C

Yellow

100

PA2-0304100

–

PA2-0306100

PA2-0308100

PA2-0310100

PA2-0312100

–

Blue

PA2-0504025C

PA2-0505025C

PA2-0506025C

PA2-0508025C

PA2-0510025C

PA2-0512025C

PA2-0514025C

PA2-0516025C

Blue

100

PA2-0504100

–

PA2-0506100

PA2-0508100

PA2-0510100

PA2-0512100

–

Black

PA2-0704025C

PA2-0705025C

PA2-0706025C

PA2-0708025C

PA2-0710025C

PA2-0712025C

PA2-0714025C

PA2-0716025C

Black

100

PA2-0704100

–

PA2-0706100

PA2-0708100

PA2-0710100

PA2-0712100

–

Silver

PA2-0904025C

PA2-0905025C

PA2-0906025C

PA2-0908025C

PA2-0910025C

PA2-0912025C

PA2-0914025C

PA2-0916025C

Silver

100

PA2-0904100

–

PA2-0906100

PA2-0908100

PA2-0910100

PA2-0912100

–

Note: ‘C’ at last digit in part number indicates packed in a box/carton. *Tube size does not conform to DIN 74324.

Online at www.imi-precision.com

Polyurethane tube Colour

Length (m) O/D I/D tube 3/2

4/2,5

5/3

6/4

8/5,5

10/7

12/8

16/11

Natural

PU2-0003025C

PU2-0004025C

PU2-0005025C

PU2-0006025C

PU2-0008025C

PU2-0010025C

PU2-0012025C

PU2-0016025C

Natural

100

–

PU2-0004100

–

PU2-0006100

PU2-0008100

PU2-0010100

PU2-0012100

–

Red

–

PU2-0104025C

PU2-0105025C

PU2-0106025C

PU2-0108025C

PU2-0110025C

PU2-0112025C

–

Red

100

–

PU2-0104100

–

PU2-0106100

PU2-0108100

PU2-0110100

PU2-0112100

–

Green

–

PU2-0204025C

PU2-0205025C

PU2-0206025C

PU2-0208025C

PU2-0210025C

PU2-0212025C

–

Green

100

–

PU2-0204100

–

PU2-0206100

PU2-0208100

PU2-0210100

PU2-0212100

–

Yellow

–

PU2-0304025C

PU2-0305025C

PU2-0306025C

PU2-0308025C

PU2-0310025C

PU2-0312025C

–

Yellow

100

–

PU2-0304100

–

PU2-0306100

PU2-0308100

PU2-0310100

PU2-0312100

–

Blue

PU2-0503025C

PU2-0504025C

PU2-0505025C

PU2-0506025C

PU2-0508025C

PU2-0510025C

PU2-0512025C

PU2-0516025C

Blue

100

–

PU2-0504100

–

PU2-0506100

PU2-0508100

PU2-0510100

PU2-0512100

–

Black

–

PU2-0704025C

PU2-0705025C

PU2-0706025C

PU2-0708025C

PU2-0710025C

PU2-0712025C

–

Black

100

–

PU2-0704100

–

PU2-0706100

PU2-0708100

PU2-0710100

PU2-0712100

–

Silver

–

PU2-0904025C

–

PU2-0906025C

PU2-0908025C

PU2-0910025C

PU2-0912025C

–

Silver

100

–

PU2-0904100

–

PU2-0906100

PU2-0908100

PU2-0910100

PU2-0912100

–

Note: ‘C’ at last digit in part number indicates packed in a box/carton.

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

SERIE PA2

5 Technical Data

Materials

• In addition to general industrial applications PA is suitable for use on air braking systems of commercial vehicles and conforms to DIN 74324. (Applicable sizes; 6, 8, 10, 12, 16 mm O/D)

Medium: Compressed air. Consult our Technical Service for use with other fluids

PA type 12 fully plasticised and light stabilised. Metric tube meet the requirements of DIN 74324

• 25 metre lengths supplied in cartons providing good protection and easy storage

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Available in a range of colours for ease of identification

Operating pressure: Refer to specific tubing type on the following pages Ambient/Media temperature: Refer to specific tubing type on the following pages

Technical data Colour

Length (m)

O/D I/D tube 4/2,5*

5/3*

6/4

8/6

10/7,5

12/9

14/11*

16/12

Natural

PA2-0004025C

PA2-0005025C

PA2-0006025C

PA2-0008025C

PA2-0010025C

PA2-0012025C

PA2-0014025C

PA2-0016025C

Natural

100

PA2-0004100

—

PA2-0006100

PA2-0008100

PA2-0010100

PA2-0012100

—

Red

PA2-0104025C

PA2-0105025C

PA2-0106025C

PA2-0108025C

PA2-0110025C

PA2-0112025C

PA2-0114025C

PA2-0116025C

Red

100

PA2-0104100

—

PA2-0106100

PA2-0108100

PA2-0110100

PA2-0112100

—

Green

PA2-0204025C

PA2-0205025C

PA2-0206025C

PA2-0208025C

PA2-0210025C

PA2-0212025C

PA2-0214025C

PA2-0216025C

Green

100

PA2-0204100

—

PA2-0206100

PA2-0208100

PA2-0210100

PA2-0212100

—

PA2-0304025C

PA2-0305025C

PA2-0306025C

PA2-0308025C

PA2-0310025C

PA2-0312025C

PA2-0314025C

PA2-0316025C

100

PA2-0304100

—

PA2-0306100

PA2-0308100

PA2-0310100

PA2-0312100

—

Blue

PA2-0504025C

PA2-0505025C

PA2-0506025C

PA2-0508025C

PA2-0510025C

PA2-0512025C

PA2-0514025C

PA2-0516025C

Blue

100

PA2-0504100

—

PA2-0506100

PA2-0508100

PA2-0510100

PA2-0512100

—

Black

PA2-0704025C

PA2-0705025C

PA2-0706025C

PA2-0708025C

PA2-0710025C

PA2-0712025C

PA2-0714025C

PA2-0716025C

Black

100

PA2-0704100

—

PA2-0706100

PA2-0708100

PA2-0710100

PA2-0712100

—

PA2-0904025C

PA2-0905025C

PA2-0906025C

PA2-0908025C

PA2-0910025C

PA2-0912025C

PA2-0914025C

PA2-0916025C

100

PA2-0904100

—

PA2-0906100

PA2-0908100

PA2-0910100

PA2-0912100

—

* Tube size does not conform to DIN 74324 Note: ‘C’ at the last digit in part number indicates packed in a box/carton

Option selector

PA2-0˙˙˙˙˙˙˙

Colour

Substitute

Natural

Packaging 25 m Carton/Box

Red

100 m Plastic bag

Green

Length (m)*

Yellow

Blue

100

Black

Outer diameter

Silver

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Substitute C None Substitute 025 100 Substitute

Online at www.imi-precision.com

Silver Silver

235

Yellow Yellow

Serie PA2 Ø 4 … 16 mm O/D

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

Maximum operating pressures and bend radi Ø4

Ø5

Ø6

Ø8

Ø 10

Ø 12

Ø 14

Ø 16

Max. pressure (bar)* at -40 ... +20°C

Min. bend radius

Maximum continuous working temperature: PA +80°C * Multiply by factors in table below for use at higher temperatures

Operating pressure/temperature conversion factors Working temperature

Factor (PA)

-40 ... +20°C

1,00

+30°C

0,83

+40°C

0,75

+50°C

0,64

+60°C

0,57

+80°C

0,47

To calculate working pressures at various temperatures, multipy working pressure at -40 ... +20°C by factor given in table Maximum continuous working temperature: +80°C

236

Accessories Tubing channels

Tube clips – single sided

Tube cutter

Online at www.imi-precision.com

Model

Tube Ø

No. of channels

Model

Tube Ø

Number of tubes

Model

Description

100HA0600

34021804

M/3314

Cutter

100HA0800

34021904

39012010

Replacement blade (pack of 10)

100H61200

34021805

39012061

Replacement blade (1-off)

34021905

34021806

34021906

34021807

34021907

34021508

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

INLINE PRESSURE PROTECTION VALVES (PPV) 5200-75

• Protects the integrity of the air supply • Inline mounting

Technical Data

Materials

Operating pressure: 0 … 150 psi 0 … 10 psi

Thermosplastic body with Fluorosilicone seals

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES

• Designed to isolate vehicle air systems in case of leakage

Operating temperature: -40°F … 200°F (-20°C … +93°C)

• Integral Push-To-Connect (PTC) fittings

Dimensions 2.38 REF

SPRAY CAP

SUPPLY PORT

237

DOWN

12° REF

DELIVERY PORT

Online at www.imi-precision.com

SUPPLY PORT

0.47 REF

0.31 REF

0.15 REF DATE CODE/PART ID

DELIVERY PORT 0.61 REF

0.99 REF

Models Model

Open Pressure (psi)

Close Pressure (psi)

PTC Connection

5200-75

1/4" OD tube

For further information, visit www.imi-precision.com and use the new improved search function. If you cannot see the option you require please contact us.

Notes

238

239

240

For further information, scan this QR code or visit www.imi-precision.com

1 2 3 4 5

ACTUATORS ROUNDLINE CYLINDERS COMPACT CYLINDERS PROFILE CYLINDERS SERVO MOTOR

FUEL SYSTEMS FUEL TANK CAPS RETURN FLOW SPLITTER FUEL TANK VENT HIGH-FLOW FUEL TANK VENT LINEGARDÂ® BREAKAWAY VALVES

VALVES IN-LINE VALVES AND VALVE ISLANDS SOLENOID POPPET VALVES MANUAL AND MECHANICAL VALVES NATURAL GAS VALVES OTHER VALVES AND ACCESSORIES SEAT AND DASH VALVES TOGGLE SWITCHES FLIPPER CONTROL VALVES

AIR PREPARATION (FRL) COMBINATION FILTER/REGULATOR & LUBRICATOR PRESSURE REGULATORS

SWITCHES, FITTINGS, TUBINGS & ACCESSORIES ELECTRO-MECHANICAL PRESSURE SWITCH PNEUFIT DOT, TUV COMMERCIAL VEHICLE PUSH TO CONNECT FITTINGS EXHAUST GUARD LOW PRESSURE ROTOWINKS HIGH PRESSURE ROTOWINKS AIR PREPARATION ACCESSORIES SHUTTLE VALVE TUBING & HOSES SERIES PA2 INLINE PRESSURE PROTECTION VALVES (PPV)

Norgren, Buschjost, FAS, Herion and Maxseal are registered trademarks of IMI Precision Engineering companies. Due to our policy of continuous development, IMI Precision Engineering reserve the right to change specifications without prior notice. z8198CT en/11/16 Selected Images used under license from Shutterstock.com