Engineering GREAT Solutions
Introducing the New M/50 Switch with IO-Link Capability A magnetically operated solid state switch for all actuator ranges General Features
Standard Mode
IO-Link Mode
> IO-Link advantages
In Standard mode, the new M/50/IOP switch incorporates a green LED to indicate power. A second orange LED is present to ensure the switch is installed at the optimum position relative to the cylinder magnet.
In addition to Standard mode, IOLink standardised technology allows actuators and sensors to become active participants in every process chain.
> Conforming to IEC 61131-9 > Condition monitoring > Available with 5 m cable or M8 connector > Two LEDs providing status information
operative range
> Compatible with all IMI Norgren actuators
optimum position
Q on Q off
LED on LED flashes
The new M/50/IOP switch with the standardised wiring is suitable for end-to-end communication and is the perfect solution for easy configuration and integration into an intelligent automation structure. The IO device description (IODD) contains all information for specific configuration.
Smart functionality Detection counter
One switch fits all
Integration into automation systems
Compatible with IMI Norgren actuators
IO Technology IEC 61131-9 Configuration via IODD
Easy to use
IODD contains functionality Download from internet
UL listed
Permanent diagnostic
Canada and USA
Temperature measurement
Compatible
Visual installation aid
Standard and IO-Link mode Standard wiring based on M8 Properties and Functionality Operating Mode
From flashing to permanent LED
Typical magnetically operated switches Standard
Power LED
New M/50/IOP Switch Standard
•
•
LED sensor signal
•
•
•
Normally open
•
•
•
Normally closed
•
Delay mode
•
Visual Installation Aid
•
•
Temperature measurement
•
Detection counter
•
• - Included
- Manufacturer pre-setting required