Commercial Vehicles
Power Take-off Valve Ideally Suited to In-Cab Mounting The 03035103 valve has been specifically designed for use in power take-off systems typically found on commercial vehicles. > Pneumatic reset > Visiwink indicator when power take-off is engaged > Pneumatic or manual disengage > Suitable for single or double acting cylinders
Engineering GREAT Solutions
G1/8 BSP porting
Technical data
Function
3/2 spool valve pull/push with pilot reset
Medium
Compressed air, filtered, lubricated or non-lubricated
Operating Pressure
2 ... 10 bar
Ambient/Media Temperature
-15ºC ... +50ºC
Flow
0,34 Cv
Materials
Die cast zinc alloy body, alloy spool and operating head, nitrile rubber seals
Typical Circuit for Power Take-off Interlock
Dimensions
Dimensions in mm Projection/First angle
Auxiliary air supply
1
53 27
Raise signal Power take-off switch
2
To power take-off pump
Visit www.imi-precision.com
‘12’
‘2’ ‘3’
‘10’ ‘1’
20
Lower signal
1
M16 x 1,5
3
5,4 (17)
Only if power take-off is double acting otherwise plugged
8,5 17
10 24
G1/8
36
4
19
9 25
ø 30
2
~5 stroke
6
22
3,5
21
Raise/lower valve
155 86