Level 1 SERIES 1 PROJECT GUIDE NO 3
Ribbons ●
●
●
Creating Beautiful Gifts Over and Over Again Birthdays Engagements Weddings Anniversaries Special Occasion Stemware Table Decorations Bomboniere AND SO MUCH MORE ●
●
●
Turning beginners into professionals with instant success 1|©In a Spin Nique’s Way™ 2012
IT’S THE ONLY WAY TO DECORATE GLASS!!!
YOUWILLNEED Nique’s Wheel – Get yours now
www.inaspinniquesway.com.au
Glassware
Your choice of glassware in any combination, excluding square pieces Select from water based non toxic oven baked glass paints. You will need at least 1 colour to work with, get creative and use more. Fill with your choice of paint. Select superfine glitter if adding any writing or finishing touches. Suggested: Silver 1 inch wide brush and a size 6 or 8 long round brush. Prepare and print your choice of writing or select and print from the In a Spin Nique’s Way Word™ File. Pins, dusting brush, large container and a teaspoon Foil and foil Glue Oven tray
Paint
Outlining bottle Glitter
Brushes Writing
Other Embellishments Home oven
Nique’s Wheel Not all toy pottery wheels are suitable for banding glass.
Look for a foot control pedal. Anti clockwise spin for right handed and clockwise spin for left. You will need to add a flat cross of blu - tac www.inaspinniquesway.com.au directing you to the right choice. ( pictured is my most recent purchase)
2|©In a Spin Nique’s Way™ 2012
Imagine: Weddings, personalised toasting flutes for the Bride and Groom and Bridal party but why stop there? Make the perfect personalised thank you gifts that will be treasured forever.
Step 1: Is always, wash glassware thoroughly in warm water and dry with a lint free cloth.
C A
E B
D
C E
B
3|ŠIn a Spin Nique’s Way™ 2012
Step 2: Fill an outlining bottle first and have it ready. Load the 1 inch wide brush and position the first band A about centre and a wide band on any bases. Load the long round brush and band B above leaving a .5cm gap between both. Load the brush again and band on the lower side leaving a .5cm gap again. With the outlining bottle, paint in a fine band C above and in between the first gap and two below the lower band continue on to finish any bases. Allow to dry. Step 3: Have ready glitter, dusting brush, large container and a teaspoon. Working quickly, complete any writing and sprinkle glitter on while paint is still wet. Allow to dry before dusting any excess glitter off. Step 4: Bake at 150C for 30 minutes and allow to cool before removing from the oven. Always ensure good ventilation. Step 5: With the foil glue, band fine lines E over both thin bands. Load the long round brush and band D a thin line centre of the wide band. Position a thin band around the base. Allow the foil glue to dry clear. Step 6: Finish by gently pressing foil over glue.
It’s not just another project it’s a whole new learning experience Creating a Network Uniting Artists and crafters around the world Sign up to our newsletter to be the first for all the latest
Catch a class
Join our network of Instructors creating a strong consistent message Join our Network of Independent Artists all over the world and found right here.
Become a part of In a Spin Nique’s Way™ Network of professionals, to advertise with us or simply join in the fun
www.inaspinniquesway.com.au Studio 2 / 11 West Beach Road, West Beach, South Australia 5024 PO Box 100 West Beach SA 5024
The paints I recommend are dishwasher safe if you have followed the manufacturer’s instructions accurately and your project is completed using only that medium. In a Spin Nique’s Way™ Projects include the use of glitter, diamantes and foil combined with the qualities of the paints and by following the instructions a very durable hand wash finish is achieved. Recommended drying and oven times do vary between manufacturers. Each In a Spin Nique’s Way project offers a common baking instruction suitable for achieving a high level of durability. All information in this project guide is copyright and presented for personal use only and cannot be reproduced in part or in full without prior written permission from In a Spin Nique’s Way™. Instructions in this project guide are published in good faith and no guarantee or warranty is offered towards results expressed or implied and In a Spin Nique’s Way™ disclaims any liability for any results not satisfactory to its creator.
4|©In a Spin Nique’s Way™ 2012