Pipetech
Cutting Edge Technology
Unique methods for the removal and unplugging of scale in pipes, heat exchangers and processing equipment
23.03.2011 - Slide 1
Pipetech We keep your flow going! A pipe maintained by Pipetech.
Your pipe?
23.03.2011 - Slide 2
QA / HSE
Pipetech
• ISO 9001-2000 certified by DnV Aug 2008 • HSE, NORSOK S-006 • No injuries or accidents since Pipetech's launch in 2001 • Pipetech’s personnel “in-house” trained in all relevant areas
23.03.2011 - Slide 3
Pipetech
Hâ‚‚O
Pipetech’s only detergent is pure water!
23.03.2011 - Slide 4
Aqua Sonic速
Pipetech
Aqua Sonic速 nozzle is inserted into the pipe The clogged pipe is filled with water.
Soundwaves propagating through the water tears the scale loose.
Loose scale is ejected from the other end of the pipe. 23.03.2011 - Slide 5
Pipetech
Aqua Sonic速
HP 10K HOSE
RAM ASSEMBLY
AQUA SONIC速 VALVE CENTRAL LP 250 PSI HOSE 90-110 PSI SERVICE AIR
SIGNAL CABLE
HYDRAULIC HOSES
HYDRAULIC PUMP
AQUA SONIC速 CONTROL PC 23.03.2011 - Slide 6
Pipetech State of the Art method for the removal of internal scale and debris from pipes using high pressure water as a cutting tool
23.03.2011 - Slide 7
Pipetech
Aqua Milling速 can negotiate up to fifteen 90 bends in 1 operation!
Scale is cut away by a precision guided 15.000psi waterstream
23.03.2011 - Slide 8
Aqua Milling®
Pipetech • 25mm to 10m in diameter • Up to 500m pipe length • Up to 20 directional changes • Horizontal, vertical and submerged • No damage to pipe material: PTFE lined, graphite, steel, concrete, PVC, HDPE, clay or fibreglass • Up to 300FT VERTICAL without cable, crane or scaffolding
23.03.2011 - Slide 9
Our Equipment
Pipetech
• NORSOK Z-015 pumps – 1100bar • Vacuum Units – Sone II • Hose reel – Sone II, 1000bar, 600 meter ¾” • Mobile hot water cleaning unit – 320bar • UHP Units • High pressure lances for ROV
23.03.2011 - Slide 10
Aqua Lancer™
Pipetech
Specialized Heat Exchanger cleaning using the Aqua Milling® technology includes: •Aqua Milling® jets eliminate the use of conventional high pressure. •The wide angle impact jets increases cleaning efficiency more than 500% against most scales. •Air operated rigid lancing system. Controlled cutting track during in/and out travel completely prevents “skipping” of wall areas. •Adjustable stroke length to meet individual bundle requirements. •Aqua Milling® proprietary nozzle-holder technology prevents bending of lances as well as excess forces on the equipment seen with conventional lance systems.
23.03.2011 - Slide 11
Inspection
Pipetech
Heat Exchangers Inspection Turbine Inspection High Temperature Endoscopes Thermographic Imaging Eddy Current RFT CCTV inspection
23.03.2011 - Slide 12
Pipetech
Web Sites
www.pipetech.no www.achilles.no All trademarks and registered trademarks are the property of Pipetech International AS and associated companies.
AquaSonicŽ cleaning software is made by Pipetech International. Copyright Š 2009 Pipetech International. All Rights Reserved.
23.03.2011 - Slide 13