How_To_Equip_Bluetooth_RQ_HUNO

How To Equip Bluetooth to

RQ-HUNO

Cable

Bluetooth Board

Bluetooth Chip

1) Prepare “Bluetooth Board, Bluetooth Chip, 2s rivet, Cable”.

2s rivet

2) Take out Battery.

4) Connect one side of Cable to Bluetooth Board.

3) Take out Chest Part.

5) Put through the one side of Cable to the hole of Body part.

6) Make cable as shown above.

8) Insert 2s rivets to Bluetooth Board.

7) Insert cable to “COM� connector of RQ Controller.

9) 2s rivets are inserted as shown above.

10) Put “Bluetooth Board” into “Body Part”.

12) Check Bluetooth Chip Pin connector well.

11) You can see as show above.

13) Insert Bluetooth Chip.

14) Cover “Chest Part” to Body Part.

16) Completed!

15) Insert Battery as shown above.