Reciever, $14, http://www.bphobbies.com/view.asp?id=A3067651 Control horns 4ea, $1.25, http://www.rcfoam.com/cart.php?targ...category_id=132 EZ connectors 4ea, http://www.hobbycity.com/hobbycity/...s__1.5mm_(5pack) Prop saver bands from West Michigan Parkflyers.
A
INSTRUCTIONS 1. CUT OUT ALL PARTS AND TRANSFER FUSELAGE ALIGNMENT GUIDES TO BOTH SIDE OF HORIZONTAL SURFACES. 2. HINGE ALL CONTROL SURFACES. 3. ASSEMBLE ALL HORIZONTAL SURFACES FIRST. THEN ADD FUSELAGE VERTICAL UPPER OR LOWER DEPENDING ON SERVO. ESC, AND RX LOCATIONS SELECTED. 4. COMPLETE BY ADDING REMAING FUSELAGE PART, RUDDER, PUSHRODS, AND CONTROL HORNS.
SUGGESTED EQUIPMENT 1) Cheapest, 24 gram motor, $8.95 sometimes less on sale, Blue Wonder 1500 kV 1.5) BW substitute Turnigy 2730-1500 Motor mount for 24 gram motor, $1.20, plastic motor mount 2) Mid $, 2204-14, http://www.justgofly.com/Order%20Form.htm Scroll down the page until you get to the motor and 3) More $, Hacker A10-9L Prop, $1.20, GWS 8x4 available widely Prop adapter if required, $1.99, http://www.hobbycity.com/hobbycity/...apter_&_3_bands 1) ESC for 24 gram motor, $11.95, Hobby King SS
2) ESC for 2204-14, http://www.justgofly.com/Order%20Form.htm Scroll down the pageuntil you get to the motor and 3) ESC for hacker, http://www.hobbycity.com/hobbycity/...ed_Cont roller 1) cheapest Rudder and elevator Servos, $3.49 ea , http://www.hobbycity.com/hobbycity/...sec_Micro_Servo 2) mid $ servos, Eflight S60's, http://stores.homestead.com/fancyfo...ervo/Detail.bok 3) high $ servos, Dymond D47, http://stores.homestead.com/fancyfo...ervo/Detail.bok Aileron servo http://www.hobbycity.com/hobbycity/...sec_Micro_Servo Reciever, $14, http://www.bphobbies.com/view.asp?id=A3067651 Control horns 4ea, $1.25, http://www.rcfoam.com/cart.php?targ...category_id=132 obbycity.com/hobbycity/...s__1.5mm_(5pack)
or and esc.
tor and esc. B
INCH SCALE
0
1
2
3
4
5
6
B
A
Change A - Horizontal nose widened .75" and Rudder extended .25" at top and .50" at the bottom. 03-NOV-2009 Change B - Moved aileron hinge line forward .75" at wingtip and 0" at root. SPECIFICATIONS: WINGSPAN - 32" (813MM) LENGTH - 32" (813MM) HIEGHT - 9.5" (241MM) CENTER OF GRAVITY - 3.5"(89MM) FROM LEADING EDGE OF WING AT ROOT MATERIAL: 9MM EPP 6MM X 0.5MM CARBON FIBER FLAT STOCK 2 AT 14.875" FOR LONGERONS, AND 1 AT 9.75" FOR ELEVATOR JOINER SPAR. 1 - 3MM OR .125" X 24" LONG CARBON FIBER TUBE FOR WING SPAR
6MM X .5MM CARBON FLATS
A
B
EPP Edge 540T Design by Leadfeather CAD Plans by Dz1sfb 12-OCT-2009 Change A - Horizontal nose widened
A
C.G. 3.50in