Sealey leaflet Autumn - Winter 2019/20 by InterCars SA

Autumn-Winter 2019/20 Vertical Transmission Jacks

Model No. SEA 1500TR (Extended)

Model No. SEA 1500TR

Low Entry Trolley Jacks with Rocket Lift

• Features high speed lift to gearbox - just lift piston. • Foot pedal operation keeps hands free. • Spring loaded dead man’s safety release control reduces the risk of inadvertent lowering. • Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. • Extra large castors allow for increased manoeuvrability. • Hydraulic unit larger than the economy models for improved performance and durability.

o. el N Mod 250LE 3 A SE

• Length: 700mm. • Universal joint release mechanism allows safer, more controlled lowering of the jack. • Profiled lifting arm gives low clearance height of just 90mm x 390mm deep making these units suitable for sports and custom cars. • Heavy-duty chassis with strengthening flanges along the side for extra torsional rigidity under load. • Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.

Capacity

Min./Max. Saddle Height

SEA 300TR

300kg

1120/1940mm

SEA 600TR

600kg

1175/1985mm

Model No.

SEA 1000TR

1tonne

1120/1950mm

SEA 1500TR

1.5tonne

1120/1950mm

Model No.

3tonne Super Rocket Lift Trolley Jack

Capacity

Min./Max. Saddle Height

SEA 2750LE

2.75tonne

90/520mm

SEA 3250LE

3.25tonne

90/530mm

3tonne Trolley Jacks Rocket Lift PRO CHOICE TEST 2018 PRODUCT

LRM Product winner logos.indd 156

• • • •

02/02/2018 11:31

Min./Max. Saddle Height: 132/472mm. Chassis Length: 620mm. Single-piece hydraulic unit with heavy base design and large jacking saddle. Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point. • Universal joint release mechanism allows safer, more controlled lowering of the jack. • Fitted with safety overload valve and Model No. pump-through valve to prevent handle SEA 3015CXD locking at maximum ram extension.

• Min./Max. Saddle Height: 100/533mm. • Heavy base design and large jacking saddle for increased load stability. • Universal joint release mechanism allows safer, more controlled lowering of the jack. • Rocket Lift feature brings lifting arm into contact with jacking point with minimal pumps. • Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. • Magnetic wheel nut retention tray. • Protective jack handle sleeve helps prevent accidental damage to car bodywork. • 2 Year Warranty - 2nd year subject to T&Cs and registration on website (www.sealey.co.uk).

Model No.

Colour

SEA 3040AG

Green

SEA 3040AO

Orange

SEA 3040AY

Yellow

Engine Support Beam 300kg Capacity

• Precision valve allows delicate adjustment when taking out gearbox and realigning during replacement. • Includes two chains for safe loading. Model No. • Supplied with pulling hook and four castors for extra manoeuvrability in confined spaces. SEA TJ1000F • Fully adjustable saddle with forward and SEA TJ1500F backward tilt.

Composite Creeper with 4 Wheels

• • • • •

One piece, moulded high impact polymer creeper. Padded headrest. Low profile. Model No. Four Ø50mm swivel castors. SEA SCR80S Size (L x W x H): 915 x 410 x 95mm.

Model

Mod el

No. SE

A TJ1

No. S EA T J100 0

500F

Floor Transmission Jacks

Capacity

Min./Max. Saddle Height

1tonne

185/730mm

1.5tonne

170/810mm

• • • •

Min./Max. Width: 585/1580mm. Supports and accurately positions engine. Ideal for replacing anti-vibration mountings. Aids the removal of gearboxes and transmissions.

Model No. SEA ES300

Deluxe Mechanic’s Creeper/Seat with 6 Wheels

• Heavy-duty steel. • Powder coat paint finish. • Six Ø60mm castors on ball bearing swivels. • Dual application: flat creeper or folded up as mechanic’s seat. • Supplied flat. • Converts to seat mode in seconds. • Creeper Mode (L x W x H): 1010 x 440 x 145mm. • Seat Mode (L x W x H): 560 x 440 x 415mm.

Model No. SEA SCR78

Mechanic’s Mat Set EVA - 28mm • Quality 28mm EVA mats ideal for the busy mechanic. • Set comprises full length and kneeler mats. • For use on workshop floors when working on wheels, brakes, tyres and exhausts. • Also ideal for roadside repairs. • Sizes: Kneeler 450 x 215 x 28mm, Full-length 980 x 380 x 28mm.

Model No. SEA VS8571 Engine Stand 550kg Capacity

• • • •

Accepts wide variety of engines and transmissions. Head swivels through 360°. Swivel castors. Model No. Fully adjustable mounting arms. SEA ES550

Mobile Engine Repair Workbench

• Sturdy steel construction with powder coated finish to prevent corrosion. • Angled worktop to one drain point makes this ideal for working on engines, transmissions, gearboxes or hydraulic systems. • All fluids drain into a removable polyethylene container. • Features a lockable drawer, a bottom shelf ideal for parts and tool storage and four swivel castors, two of which are locking. • Size (W x D x H): Model No. 1205 x 640 x 880mm. • Capacity: 250kg. SEA AP1200MW

Load Sling Adjuster 680kg Capacity

• Handles and levels heavy, off-centre loads quickly and easily. • Ball bearing handle allows for a smooth and easy adjustment. • Three adjustment holes accommodate different sized engines. • If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum. • Supplied with 4 x 275mm chains and 4 x ‘L’ shaped brackets with additional karabiner Model No. styled screw links.

SEA LS501

42 Bit Capacity Magnetic Bit Holder

7 Drawer Push-To-Open Rollcabs

• Storage for 10mm hex drive bits. • Composite holder with strong magnetic base helps maintain a tidy workstation. • Ideal for tool chests or any ferrous surface. • Holds up to 42 bits.

Model No. SEA BH42 Load Slings 1tonne Capacity

• Weight for weight, these straps are 3-5 times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • • • • • • • •

Constructed from heavy gauged steel with steel inner walls for extra strength and durability. Heavy-duty 45mm ball bearing drawer slides provide superior performance and carry heavier loads. Fitted with Ø125mm castors with black chrome hubcaps, two swivel locking castors and two fixed. New and innovative ‘Push-To-Open’ drawer system for easy opening, even when your hands are full. Model No. Colour Rust and solvent resistant powder coat paint finish. All drawers supplied with 2mm EVA drawer liner. APPD7G Green Fitted with cylinder locks and supplied with two keys. APPD7O Orange Overall Size (W x D x H): 702 x 477 x 993mm.

Model No.

Length

SEA LS1001

SEA LS1002

SEA LS1003

2tonne Jacking Beam with 1.6m Extending Arms & Flat Roller Supports

• Fully certified and approved to comply with MOT requirements. • 1.6m Load arm reach. • Beam Lift: 95-300mm. • Two-stage mechanical safety lock and telescopic finger guards. • Spring loaded flat arms with roller bearings. • Optional hook arms supplied. • Supplied with two pairs of aluminium support blocks. • Wide lift configuration meets MOT recommendation for lifting on jacking point.

1tonne Low Profile Folding Engine Crane

• • • • • •

Low entry of 80mm. Fast folding. Heavy-duty nylon castors. Weighs only 79kg. 270° Lift control. Dead man’s control for load release. • Lifts 1000kg at 945mm jib extension. • Fully assembled.

Model No. SEA PH10

Model No. SEA SJBEX200

2tonne Folding Crane

3tonne Fixed Frame Crane

• Lifts 2000kg at 930mm jib extension. • Folds for easy storage. • Side pump access with removable handle. • Delivered in knock-down form. • Some self-assembly required.

• Lifts 3000kg at 1200mm jib extension. • Heavy-duty castors. • Side pump access with removable handle. • Extendable legs for improved stability. • Delivered in knock-down form. • Some self-assembly required.

Model No. SEA PH20

Model No. SEA PH30

Portable Shot Blasting Kit

37L Shot Blaster with Water Trap & Wheels

Portable Soda Blasting Gun

• Compact and portable shot blasting kit. • Large capacity hopper with convenient carry handle and integral hose storage. • Supplied with 4.5m of grit hose and fitted with a heavy-duty shot blasting gun.

• Pressurised tank for maximum power. • Supplied with 2.4m rubber hose, five ceramic nozzles and in-line water trap for moisture-free grit blasting. • Also includes bayonet air line coupling and airflow regulator. • Accepts a variety of grits up to 700microns and is suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.

Model No. SEA SB997

• Suitable for controlled removal of paint, mould, carbon, grease and rust. • After blasting, the remaining surface will inhibit rust for up to six weeks. • Adjustable nozzle allows control from narrow to wider stream.

Model No. SEA SB993

25kg Blasting Soda Bag

25kg Shot Blasting Grit

• Blasting soda for use in conjunction with Model No’s SB99.KIT, PSB10, PSB40 and other brands of soda blasters. • Soda leaves a rust inhibitor behind for up to 6 weeks. • Grade/Size: Extra Coarse/285microns. • Suitable for removing rust, paint, mould, grease, from fibreglass, brick, stone, marble, tiles, glass, rubber and bearings.

• Suitable for workshop, hand-held and recirculating shot blasters. • Complies with COSHH SI-1657-1988. Not suitable for use in shot blasting cabinets.

Model No. SEA SBG25KG

Model No. SEA PSB05

20tonne Floor Type Hydraulic Press

Model No. SEA B/25KG

Bottle Jacks • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle.

Model No.

Capacity

• • • • •

Table Aperture: 105mm. Working Table Width: 550mm. Ram Stroke: 185mm. Overall Height: 1810mm. Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. • Supplied with gauge.

Min./Max. Height

SEA SJ2

2tonne

175/339mm

SEA SJ5

5tonne

210/407mm

SEA SJ10

10tonne

225/450mm

SEA SJ20

20tonne

240/450mm

Model No. SEA YK20F

10tonne Telescopic Low Entry Bottle Jack

Model No. SEA VS2002

Ratchet Type Axle Stands (Pair)

• Ratchet type with cast iron support posts. • Tough steel plate welded bases..

Model No.

Capacity (Each)

Capacity (Pair)

Min./Max. Working Height

SEA VS2002

2tonne

4tonne

261/415mm

SEA VS2003

3tonne

6tonne

280/425mm

SEA VS2006

6tonne

12tonne

385/600mm

• • • •

Min./Max. Height: 128/223mm. Telescopic two-stage ram for higher maximum lift. Compact closed height. Cast base with threaded components. Model No. • 4pc Operating handle. SEA BJ10LE • Carrying handle.

Bottle Jacks

T A LY

• Safety overload valve. • All steel, one piece base, reservoir and pump cylinder. • Telescopic pump handle. • 90° Rotating pump. • Serviceable ram piston with extension screw. • Service kit available.

Model No.

Capacity

Min./Max. Height

SEA PBJ5

5tonne

212/437mm

SEA PBJ10

10tonne

219/444mm

SEA PBJ15

15tonne

229/452mm

SEA PBJ20

20tonne

234/459mm

SEA PBJ30

30tonne

242/467mm

SEA PBJ50

50tonne

260/400mm

Axle Stands (Pair)

4 SMD LED USB Rechargeable Beanie Hat

• Sturdy welded steel construction. • Captive pin load support. • Sold in pairs.

Model No. SEA AS3

Capacity (Each)

Capacity (Pair)

Min./Max Working Height

3tonne

6tonne

293/432mm

SEA AS6

6tonne

12tonne

369/571mm

SEA AS12

12tonne

24tonne

487/752mm

• Warm, comfortable and simple to use. • Removable 4 SMD LED lamp produces up to 120 lumens. • Rechargeable 3.7V 300mAh Polymer battery. Model No. • Operating time 2.5-5hr. SEA LED185 • USB Socket for charging.

360° 7W COB LED Rechargeable Pocket Floodlight with Magnet

12 SMD LED + 1W SMD LED Rechargeable Slim Folding Inspection Lamp

• Heavy-duty aluminium housing with sturdy handle which can rotate through 360°. Also fitted with a strong magnet, making it simple and easy to direct up to 700 lumens of light. • Three light output settings: 100/350/700 lumens. • Features three LED battery level indicator. • Fitted with a high quality 3.7V 2.6Ah Li-ion battery. • Charges via a micro USB lead (Braided micro USB included).

• Slimline foldout inspection lamp for use in confined spaces, with 6mm minimum thickness. • Inspection arm can be rotated 180° and folded back for use as a hands-free inspection lamp. • 12 SMD LED Inspection lamp which produces up to 500 lumens, operated by a rolling dimmer switch. • 1W SMD LED In the end for use as a directional torch. • Suitable for hands-free operation with three magnets and a hanging hook. • Folds away, small and compact, suitable for keeping in your pocket. • Can be charged in a Sealey docking station LED1801K (not supplied). • 3.7V 2.6Ah rechargeable Li-ion battery. • Supplied with USB charging lead. • Operating Time: Inspection Lamp Model No. (500lm); 3hrs, Directional Torch; 8hrs. SEA LED1801 • Charging Time: 4hrs.

Model No. SEA LED700P

Rechargeable Wireless Sound Bar • Stylish and modern sound bar is finished in anthracite grey. • Plays your favourite music easily from your smart phone or tablet either by wireless technology, AUX in via an AUX cable (1m AUX cable supplied) or even takes a micro SD card. (Micro SD not supplied). • Two channel sound bar includes a pair of 2" speakers and one vibrating diaphragm for added sound quality. • Base is mounted on two sturdy feet with high grip foam pads which helps dampen any vibration. Model No. • Charges from a USB cable (USB cable included). SEA SB1 • Dimensions: (W x D x H): 428 x 57 x 64mm.

Composite Wheel Chocks 0.3kg Pair

Car Ramps Low Entry 1.5tonne Capacity per Ramp 3tonne Capacity per Pair

Car Ramps 1.5tonne Capacity per Ramp 3tonne Capacity per Pair

• Two composite wheel chocks with rubberised grip bases. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 15 degrees. • Suitable for cars not exceeding 2tonne gross weight.

• Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions Model No. (L x W x H): SEA CAR3000LR 700 x 200 x 80mm.

• • • •

Model No. SEA WC09

Manufactured from durable polypropylene. Suitable for professional or serious DIY applications. Overall Dimensions (L x W x H): 900 x 300 x 215mm. Maximum Tyre Width: 260mm.

Model No. SEA CAR3000C

Hydraulic Motorcycle Lift 365kg Capacity

• Min./Max. Height: 220/760mm. • Working Platform Size (W x L): 480 x 1350mm. • All steel construction with foot operated, integral hydraulic pump and ram assembly. • Fitted with safety lock device to fix platform at three working heights of 500, 640 and 760mm to prevent accidental lowering. • Suitable only for motorcycles with a centre stand. • Support platform fitted with full width loading ramp. • Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.

Model No. SEA MC365

Hydraulic Motorcycle Lift 450kg Capacity

• Min./Max. Height: 195/660mm. • Working Platform Size (W x L): 660 x 1825mm. • All steel construction with foot operated, integral hydraulic pump and ram assembly. • Fitted with safety lock device to fix platform at three working heights of 405mm, 555mm and 660mm to prevent accidental lowering. • Suitable for use with centre stand motorcycles or with paddock stand. • Support platform fitted with full width loading ramp. • Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.

Model No. SEA MC454

Air/Hydraulic Mini Tractor/Quad/ Motorcycle Lift 680kg Capacity

• • • • • • • • •

Min./Max. Height: 190/790mm. Width (Standard/Maximum): 710/1220mm. Length: 2000mm. All steel construction with heavy-duty hydraulic ram with air pump. Supplied with separate, foot operated, hydraulic pump and reservoir unit. Features two additional side platforms for extra width. Ramp and platform made with chequer plate surface to ease loading and positioning of mini tractor. Overrun guard at front of platform and safety lock to prevent accidental lowering. Suitable for use with centre stand motorcycles or with paddock stand.

Model No. SEA MT680

Universal Light Mounting Bracket Number Plate Fitting

Universal Light Mounting Bracket Including Bar - Number Plate Fitting

Tow Pole 2000kg Rolling Load Capacity

• Simple, lightweight solution for mounting driving lamps or LED light bars to most cars, vans and commercial vehicles. • Enables lights to be fitted above or below the number plate. Model No. • Size (H x W x D): 125 x 365 x 55mm. SEA DLB01

• Simple, lightweight solution for mounting driving lamps or LED light bars to most cars, vans and commercial vehicles. • Enables lights to be fitted above the number plate. Model No. • Size (H x W x D): SEA DLB02 20 x 590 x 90mm.

• Locking tow hook feature ensures secure attachment to vehicle. • Suitable for mixed towing hook configuration. i.e. not Model No. both horizontal/vertical. • Supplied in pouch. SEA TPK252

Tow Pole with Shock Spring 2000kg Rolling Load Capacity

Tow Pole 2500kg Rolling Load Capacity

IT A LY

• Spring loaded damper unit. • Locking tow hook feature ensures secure attachment to vehicle. • Suitable for mixed towing hook configurations, i.e. not Model No. both horizontal or vertical. SEA TPK2522 • Supplied in pouch.

• Hook mechanism allows for mounting pole between vehicles where towing eyes may be mixed. • Maximum Length: 1.8m.

Model No. SEA TPK253

IT A LY

• Hook mechanism allows for mounting pole between vehicles where towing eyes may be mixed. • Maximum Length: 1.6m.

Model No. SEA TPK353

4ft Trailer Board with 5m Cable

4ft 6in Trailer Board with Fog Light & 6m Cable

• Composite board fitted with 5m of 7-core cable and 12V N-type plug. • Includes 2 x e-approved reflective triangles and 2 x 4 function lamp clusters (stop, tail, indicator and number plate illumination light). • Pre-drilled mounting points (905mm centres).

• Composite board fitted with 6m of 7-core cable and 12V N-type plug. • Includes 2 x e-approved reflective triangles, 2 x 4 function lamp cluster (stop, tail, indicator and number plate illumination light) and fog lamp. • Pre-drilled mounting points (905mm centres).

Model No. SEA TB4/5

Model No. SEA TB46/6

Hand Power Puller 1000kg Capacity

Hand Power Puller 1500kg Capacity

• Ready for use with cable already installed. • Side frames are manufactured in one-piece from best quality steel and zinc chrome plated for long term corrosion resistance. • Fitted with ratchet safety device. • Perfect for marine, industrial and automotive applications.

Model No. SEA HP1000

Tow Rope 3000kg Rolling Load Capacity

Model No. SEA HP1500

• Intended for towing passenger cars and van derivatives. • Extensively tested. • Heavy-duty stitched panels provide as much protection Model No. as possible from long term SEA TH3002 wear and tear.

10tonne Body Repair Kit - Snap Type

20tonne Body Repair Kit - Snap Type

• Heavy gauge snap-together pipe-work and cast snap-together attachments. • Compatible with most other leading makes of snap-together equipment. • Supplied with 10tonne Model No. hand-operated pump, hose, SEA RE97/10 hydraulic ram and carry-case.

Air Blow Gun

Gold Series Suction Feed Spray Gun 1.8mm Set-Up

• Heavy gauge snap-together pipe-work and snap-together attachments. • Compatible with most other leading makes of snap-together equipment. • Supplied with 20tonne hand operated pump, hose, hydraulic ram and metal carry case. Model No.

5pc Air Accessory Kit

Gold Series Gravity Feed Spray Gun 1.4mm Set-Up

• Die-cast metal body with moulded handle and hanging point. • Fitted with short type nozzle. • Maximum Operating Pressure: 110psi.

Model No. SEA SA334

• Professional coating gun suitable for automotive and general industrial applications. • Accepts most popular types of 1L coating tin. • Supplied with extended flexible nozzle for wax spraying cavities. • Air Inlet Size: 1/4"BSP. • Air Supply: 90psi(8cfm).

Model No. SEA SG14

Model No. SEA S701

SEA RE9720

• Contains quality components. • Contents: Suction Feed Spray Gun, Blow Gun, Tyre Inflator, Paraffin Gun, Coiled Air Hose with couplings.

Air Operated Underbody Coating Gun

• High quality, professional spray gun ideal for automotive refinishing. • Suitable for a wide range of materials. • Standard Set-Up: 1.8mm. • 1.5mm and 2mm Set-ups available. • Supplied with cam action suction pot.

Model No. SEA SA33/S

• Suitable for applying finishing coats. • Adjustable spray width, fluid flow and air volume. • Standard Set-Up: 1.4mm. • 1.7 and 2mm Set-ups available. • Air Pressure: 30-50psi. • Air Consumption: 6-11cfm.

Air Operated Wax Injector Kit

9pc Panel Beating Set

• Designed for the application of wax rust inhibitor. • Supplied with a selection of lances to enable wax to be sprayed into body cavities through a small hole.

• Drop-forged steel dollies and spoons. • Professional hickory handled hammers. • Contents: Hammers; Bumping, Skinning, Pein/Finish, Pick/Finish, Dollies; Toe, Universal, Heel, Spoons; Dinging, Surfacing.

Model No. SEA SG18

Air Operated Underbody Coating Gun

230mm Caulking Gun for Sausage Packs & Cartridges - Red

• Accepts most, popular types of 1L coating tins. • Air Pressure: 90psi. • Air Consumption: 10cfm. • Air Inlet Size: 1/4"BSP.

• Die-cast body with anodized aluminium tube. • Supplied with plastic plunger and application nozzle. • Suitable for sausage packs and cartridges

Model No. SEA SG139

Model No. SEA CB58

Model No. SEA AK3801R

220mm Skeleton Type Manual Caulking Gun

• Suitable for 310ml cartridges up to 220mm length.

Model No. SEA S701G

220mm Heavy-Duty Caulking Gun

Model No. SEA AK39

• Suitable for 310ml cartridges up to 220mm length. • Includes tip cutter, just insert the nozzle of the cartridge and squeeze the handle. • Tip piercer/cleaner for clearing sealant from dried nozzles. • Hook end suitable for attaching to user’s belt.

Model No. SEA AK4801

Video Borescopes

Brake Fluid Tester Boil Test

• High performance pistol grip borescopes with 85mm colour TFT screen and waterproof probe pod with IP67 rating. • Features video record/playback, still images and stream live video via the AV out connection. • Videos and images are stored on a 4GB micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection. • Also features digital zoom control and rotate/flip control of image. • Powered by Lithium-ion battery pack giving up to four hours continuous use. • AV and USB cables not supplied.

Camera: Optional Probes: Viewing Angle: Pod Length: Camera Probe Length: Adjustable Light Control: Screen Resolution: Mirror Flip/Rotate Function:

SEA VS8230

SEA VS8231

Ø9mm

Ø5.5mm

53°

60°

50mm

30mm

1000mm

320 x 240

• The approved method of testing the water content of brake fluid. • Just 3% of moisture can lower the brake fluid boiling point by over 100°C. • The best way to detect this small water content is to measure the boiling point of the fluid. • The unit incorporates a heater element, LCD display and a power lead for use on 12V DC power supplies. Model No. • Works on DOT 3, 4, 5 and SEA VS0275 5.1 specification fluids.

8pc Brake Bleed Adaptor Set

Dual Wheel Separator

• Brake caliper adaptor set designed to simplify the brake fluid bleeding process. • Each adaptor fitted with common size nipple. • Supplied with a one way valve pipe for a guaranteed air tight fitment and prevents air draw back.

• Designed to remove stubborn steel wheels on commercial vehicles. • Applicable for twin and single wheel set up. • Blackened finish for added corrosion resistance. • Suitable for use with air/electric impact guns.

Model No. SEA VS4513 Ø8-28mm Ratcheting Pipe Cutter

23pc Terminal Tool Kit

Model No. SEA CV500 21pc Brake Piston Wind-Back Tool Kit

• Comprehensive kit, suitable for the removal of terminals on most wiring connectors. • Reduce time spent on, and damage to, vehicle electrical systems. • Features soft grip handles with number identification.

Model No. SEA VS9203 Wiper Arm Removal Tool

• Universal application pipe cutter designed for where access is restricted. • Ratchet mechanism allows cutting without having to rotate the tool completely around the tubing. • Cuts up to 3mm thick and is suitable for the toughest materials including stainless steel pipes. • Tightening screw allows quick and easy jaw adjustment and enables a one handed operation. • Ensures fast and problem free cutting of pipes and limits the risk of Model No. hand fatigue and personal injury. SEA AK16371

• Cast housing with ball-end thrust bolt for the fast and safe removal of taper mounted windscreen wiper arms.

• Suitable for push-back and wind-back brake pistons. • Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and Model No. adaptors and includes the three pin VAG adaptor. SEA VS0282

Model No. SEA VS806

Oil Filter Crushing Unit

Drain Plug Thread Repair Set

8-in-1 Oil Drain Plug Wrench

• The right size drain plug key always in your hand. • 8 Popular sizes covered in one tool. • Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm. • Suitable for drain plugs on engine, gearbox and back axle.

Model No. SEA VS650

• Used in conjunction with a press, this unit crushes filters up to Ø115mm. • Oil and sludge drains into a suitable container (not included). • Crushing filters minimises the cost of disposal of hazardous waste by volume. • Ram extension allows two-stage crushing of large filters without repositioning press table. • Suitable for Ø38mm(1.5") press rams. Optional adaptors enable use with Ø50mm and Ø60mm rams. • Internal Diameter: 130mm, Model No. Effective Internal Height: SEA OFC1 175mm.

Air Operated Oil Dispensing Pump Station

• Superb for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). • Set is suitable for the most popular threads used on cars and light commercial vehicles. • Tap Sizes: M13 x 1.5, Model No. M15 x 1.5, M17 x 1.5, SEA VS660 M20 x 1.5mm.

5L Oil Container with Lid & Flexi-Spout

Sump plug m15 • Tough polyethylene jug resistant to oil and most acids. • Removable flexible spout. • Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.

Model No. SEA VS660.07 Ø160mm Funnel with Flexible Spout & Filter

Model No. SEA JDL5

Heavy Lift Suction Cup with Vacuum Grip Indicator

• Polyethylene funnel resistant to oil, fuel and some acids. • Removable two-step flexible spout. • Ideal for vehicles with smaller diameter unleaded filler necks. Model No. • Fitted with handle and SEA F16F removable brass filter.

10L Oil/Fluid Drain & Recycle Container

• • • • • • •

Heavy lift capacity. Red line indicator warns of any vacuum loss. Release valve lever for quick removal. Easy attachment on smooth, non-porous flat surfaces. Complete corrosion resistant finish. Cup: Ø206mm. Maximum Lift Capacity: Model No. 60kg (Horizontal). SEA AK98945 • Supplied in carry-case.

500ml Oil Suction Syringe Metal Body

• Air operated 3:1 double acting pump for barrels or tanks with 2"BSP fittings. • Pump is supplied with air management system and connected to a 940mm rigid suction probe with non-return valve. • Features hose for attachment to digital oil meter or to optional retractable hose reel. • Suitable for use with engine, hydraulic, synthetic, gear Model No. and transmission oils up to SEA AK4560D SAE150.

• • • • •

Suitable for both the DIY user and professional mechanic. Purpose made for the recovery of oil and antifreeze. Polyethylene with UV stabiliser. Heavy wall construction stays rigid, even with hot oil. Excess capacity helps prevent Model No. overflow or spillage.

SEA DRP07

• Painted cast steel tube with T-Bar type plunger. • Particularly useful for removal of oil from gearboxes and differentials. • Supplied with 300mm flexible Model No. suction hose. SEA AK46

200ml Oil & Brake Fluid Inspection Syringe

• Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, differentials and gearboxes. Model No. • Translucent body allows easy SEA VS404 inspection of oils and fluids.

550ml Fluid Transfer/ Inspection Syringe

3L Transmission Oil Filling System

6.5L Manual Vacuum Oil & Fluid Extractor

• Pump operated oil dispensing unit with a three litre capacity. • Supplied with five multipurpose and three vehicle specific automatic transmission fluid adaptors. Model No. • Features a fluid control and depressurising valve. SEA VS70095

8L Oil/Fluid Drain Pan

• Supplied with Ø4, Ø6 and Ø8mm suction probes and a Ø10mm x 1m extension tube. • Avoids searching for drain plug keys and getting under the vehicle. • Ideal for mobile mechanics.

Model No. SEA S01169 7.6L Oil/Fluid Drain Pan

• Multipurpose syringe with Viton® seals, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. • Translucent body allows easy inspection of contents. • Dual feature allows fluid to be extracted on pull stroke and Model No. expelled on push stroke, for a SEA VS558 fast and fluent transfer of fluid.

1.5L Oil Inspection Syringe

• Made from high density polyethylene with UV stabilisers. • Large enough for single oil change. • Includes oil pouring lip, hanging hole and back-shelf Model No. with protruding stub SEA DRP01 for oil filters.

17L Oil/Fluid Drain Pan

• Made from high density Polyethylene with UV stabilisers. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed Model No. pouring spout aid return of SEA DRP02 oil/fluid to recycling container.

17L Antifreeze/Fluid Drain Pan

Viton®

• Multipurpose syringe with seal, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. Model No. • Translucent body allows SEA VS405 easy inspection of contents.

• Made from high density Polyethylene with UV stabiliser. • Heavy wall construction stays rigid, even with hot oil. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed pouring spout make easy Model No. work of returning oil/fluid to SEA DRP03 recycling container.

• Made from high density Polyethylene with UV stabiliser. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed pouring spout aids return of oil/fluid to recycling container. • Colour-coded to help keep Model No. different fluids isolated and SEA DRP04 reduces cross contamination.

12V Cordless Grease Gun

18V Cordless Grease Gun

• Cordless grease gun, developing 6000psi, to simplify and speed-up manual greasing. • Suitable for 400g cartridges, manual or bulk filling. • Features LCD battery condition indicator. • Supplied with 12V 1.7Ah battery, mains charger and in-car adaptor.

• High power, professional, cordless grease gun, developing 8000psi. • Ideal for in-field lubrication where power and speed are required. • Suitable for screw type and standard 400g cartridges, manual or bulk filling. • Features LCD battery condition indicator, air bleed and heavy-duty aluminium pressure head. • Supplied with 18V 2Ah Lithium-ion battery and mains charger.

Model No. SEA CPG12V

Model No. SEA CPG18V

Low Profile Drip Trays

• Low profile drip trays manufactured from hard-wearing recycled polypropylene. • These have a broad appeal to both the classic car user and general mechanic. • Purpose-made for the recovery of oil and fluids, these drip trays can be left under most vehicles due to the low profile design. • Ideal for use over prolonged periods of time, catching any drips that may occur whilst in storage or in the workshop.

Model No.

Capacity

SEA DRPL09

SEA DRPL15

15L

SEA DRPL25

25L

Metal Drain Pans • Zinc plated pans, ideal for oil changes, cleaning and storing vehicle components. • May also be used as a drip trays under vehicles.

Capacity

Size (W x D x H)

SEA DRPM1

432 x 331 x 89mm

SEA DRPM2

12L

489 x 371 x 91mm

SEA DRPM3

16L

432 x 331 x 143mm

SEA DRPM4

20L

489 x 371 x 153mm

Model No.

Headlight Restoration Kit • Three-stage headlight restoration kit designed to eliminate the worst cases of headlight degradation, yellowing, oxidation and scratches. • Includes everything needed to restore the cloudiest lenses. • Get great results on most plastic lenses, such as tail lights, trailers, boat windows, helmet visors, motorcycle windscreens, snowmobiles and more. • Improves visibility and safety. • One kit is intended to restore two headlight lenses. • Contents: Sanding Discs; P800 (x2), P1200 (x2), P2000 (x2), M10 Male to Female Adaptor, 40g Polishing Paste (x2), 3ml Protection Liquid (x2), 3m x 20mm Masking Tape, Backing Pad M10 Female Thread, Sponge Discs; Orange, White.

Folding Windscreen Stand

Model No. SEA HRK01

14pc Windscreen Removal Tool Kit

• Durable lightweight design delivers on quality and finish. • Complete tool kit for the removal of bonded and rubber seals. • Designed for the professional.

Model No. SEA WK14

• Lightweight tubular steel design with variable height facility. • Large rubber suckers prevent screen from moving during preparation. • Folding frame makes this ideal for both workshop and mobile screen preparation.

Model No. SEA WK4

Windscreen Cutting Wire Square

Windscreen Cutting Wire Braided

• Becoming more popular than braided wire. • Stainless steel square profile has four cutting edges. • Fast and easy cutting of urethane bond even in cold conditions. • Length: 22.5m.

• Braided stainless steel wire suitable for use with wire grips. • Use a sawing action to cut through the urethane bond. • Length: 22.5m.

Model No. SEA WK0514

Model No. SEA WK0513

Windscreen Removal Tool with Quick Release Blade

Wire Grip Handles - Pair

O-Ring & Seal Pick

• Double end tool suitable for use with all types of O-ring and grease seal. • Knurled barrel gives extra grip to greasy hands. • Push-button for fast blade changes and cutting depth adjustment. • Knurled handle with heavy-duty, protected cable. • Supplied with three shaped blades and three flat scraper blades for removing resin residue. • Replacement Blades: WK02001 - WK02006.

Model No. SEA AK522

• Reinforced composite ABS handles with heat treated, chromed steel shafts. • Suitable for use with windscreen cutting wire.

Model No. SEA WK022

Windscreen Repair Kit

6pc Trim & Upholstery Set

Model No. SEA WK0512

12pc Trim & Upholstery Tool Set

• Specialised windscreen applicator and resin, designed to penetrate deep inside chips and cracks giving an almost invisible repair. • Reinforces the damaged area preventing further spread and costly windscreen replacement. • Uses a tough resin formula which can be used for multiple repairs. Model No. • Max. Chip Diameter: 25mm. SEA WK01 • Max. Crack Length: 15mm.

• Comprehensive set, designed to simplify trim and trim stud removal. • Manufactured from resilient nylon to minimise panel damage and marking. • Includes eleven trim and upholstery tools, plus trim Model No. hammer in a heavy-duty SEA RT12KIT storage pouch.

4pc O-Ring Removal Tool Set

3pc Seal Puller Set

5pc Scraper & Hook Set

• Suitable for the safe removal of drive and transmission oil/grease seals and O-rings, without damage to seal or surrounding casting.

• Chrome Vanadium steel shafts with blackened finish. • Suitable for gasket scraping, pin/clip picking, hose removal. Model No. • Sizes range from 170 to 260mm. SEA AK520

Curved Rubber Hook Tool

Long Curved Rubber Hook Tool

4pc Mini Hook Set

• Hardened and tempered Chrome Vanadium steel shaft. • Features textured comfort grip handle. • Curved head for smooth operation in both directions. • Suitable for windscreen replacement applications.

• Hardened and tempered Chrome Vanadium steel shaft. • Features textured comfort grip handle. • Extra-long shaft with curved head for smooth operation in both directions. • Suitable for windscreen replacement applications.

• Set of four angled tools that allow removal of O-rings and seals without damage. • Features contoured and spoon tips. • Lengths: 130, 200mm.

Model No. SEA WK0310

Model No. SEA VS5211

Model No. SEA VS8000

Model No. SEA WK0313

• Manufactured from glass reinforced nylon to minimise panel damage and marking. • Includes five trim and upholstery tools, plus trim clip removal pliers with spring-loaded handles in carry-case.

Model No. SEA RT6K

• Chrome finish shafts with knurling for fingertip precision. • Suitable for removal of bushings, cotter-pins, O-rings and seals. Model No. • Classic style handle. • Overall Length: 125mm. SEA AK521

CVJ Boot Tool - Air

Ø56-116mm Universal Stretch CVJ Boot (Pack of 12 x CV96)

• Innovative tool saves time, money and frustration. • Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft. • Save on labour time by up to 70% and prevent damage to CV joint. • Composite body with simple control valve, works from standard workshop air supply. • While fitting boot the tool can be removed from the air line when pressurized (arms open) and will Model No. maintain pressure until the SEA BSL103 release button is pressed.

18pc Shock Absorber Strut Nut Kit

• Universal CVJ boot made from high quality elastomer material suitable for use with air operated boot installation tools. • Supplied with fitting kit including clips, grease sachet and cutting guide. • Suitable for most car and car derived van applications. • Joint Ø: 56-116mm. • Shaft Ø: 19-28mm. Model No. • Pack Qty: 12 x Model No. CV96.

SEA CV9612

• Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. • The go-through design of the socket and ratchet allows the extension to pass through the middle. • To be used in conjunction with a 1/2"Sq drive ratchet or T-bar (not included). • Go-Through Ratchet: 21mm. • Go-Through 82mm Deep Sockets: 16, 17, 18, 19, 21, 22, 24mm. • Extensions: Female Hex; 7, 8, 9mm, Male Hex; 6, 7, 8mm, Slotted; 5 x 8, 6 x 8, Model No. 7.1 x 9.6mm, TRX-Star*; T50. SEA VS0331

CVJ Boot Tool - Mechanical

Ø56-116mm Universal Stretch CVJ Boot

• Innovative tool saves time, money and frustration. • Install CVJ boot without removing drive shaft from the vehicle or the CV joint from the drive shaft. • No effort and no mess! Save on labour time by up to 70% and prevent damage to CV joint. • Composite body with 8.5mm hex drive. • Used in conjunction with standard chuck type drill. • Fingers are mechanically open/closed by the rotation of the drive. • Maximum Joint Diameter: 110mm. • Suitable for cars and light commercial vans.

• Universal CVJ boot made from high quality neoprene material suitable for use with air operated boot installation tools. • Supplied with fitting kit including clips, grease sachet and cutting guide. • Suitable for most car and car derived van applications.

Model No. SEA BSL104

Model No. SEA CV96

26pc Bearing & Bush Removal/ Installation Kit

8pc Strut Nut Set

• Reduces the possibility of damaging the bearing/suspension housings. • Plates and sleeves can also be used in a standard workshop press when in situ access isn’t possible.

• Castellated Sockets: Drives; 15, 21, 22mm, Sizes (Internal Ø/Tooth Width); 10.5 x 3.5, 12.5 x 3, 12.5 x 3.5, 14 x 2.5, 14 x 5, 14.5 x 5mm. • Ovals: 1/2"Sq Drive, Sizes (Internal Ø/Tooth Width): 7 x 5, 8.2 x 5.5mm. Model No. • Covers a large range of vehicle applications. SEA SX0331

• Steel jaws with PVC coated handles for added comfort. • Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions. Model No. • Suitable for all ear-type SEA VS1639 CVJ boot clips.

CVJ Boot Installation Tool

CVJ Removal Tool

CVJ Boot Band Pliers

• Composite cone. • Enables installation of CVJ boot without splitting drive train. • Suitable for use with all Sealey CVJ stretch boots.

• Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. • Reduces risk of damage to transmission. Model No. • Saves on labour time and SEA VS710 suitable for most vehicles.

• Steel body CVJ Boot band pliers with 3/8"Sq drive, for the assembly of new stainless steel bands on drive shafts where a torque setting is required. • Length: 270mm.

Model No. SEA VS7023A

Model No. SEA VS705

Ear-Type Clip Pliers Extra Heavy-Duty

Model No. SEA VS1640

Hydraulic Coil Spring Compressor 1000kg Capacity

Coil Spring Compressor Restraint System

• Safety restraint system designed for use with Model No’s RE231, RE2311 and RE232 Coil Spring Compressors. • Quickly installed and fast and simple to operate in use. • N.B. Coil Spring Compressor not included. • Equipped with two pairs of spring yokes with plasticized covers to prevent slippage and damage to springs. Model No. • Suitable for springs from SEA VS7011 80mm ID to 165mm OD.

2pc Heavy-Duty Coil Spring Compressor Set 1200kg Capacity/Pair

• Hardened carbon steel lead screws and cast jaws. • Wrap-over coil claws for extra safety. • Suitable for use where space under wheel arch is limited. • Use with 1/2"Sq drive wrench. • Maximum Jaw Opening: 244mm. Model No. • Maximum Capacity Per Pair: SEA AK3841 1000kg.

Model No. SEA RE23RS Hydraulic Coil Spring Compressing Station with Gauge 2000kg Capacity • Foot operated hydraulic unit, with gauge showing force applied to the spring under compression. • Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. • Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer’s warranty. • Suitable for springs from Ø87mm to Ø202mm.

• Features adjustable safety bar for additional security. • Compressors have lower safety jaws for ultimate peace of mind. • Use 19mm hex socket or spanner.

Model No. SEA AK3843

52pc Copper Lug Terminal Assortment

• Copper lug terminal assortment. • Supplied in partitioned box.

Model No. SEA AB016CT

200pc Blue, Red & Yellow Crimp Terminal Assortment

• Crimp terminal assortment. • Supplied in partitioned box.

Model No. SEA AB038MT

2pc Coil Spring Compressor

10-120mm² Copper Lug Terminal Crimping Tool

• • • •

Copper lug terminal tool. Crimp range 10-120mm² BS Standard type terminal. Made from SCM40 hard tool steel.

Model No. SEA AK120B

Crimping Tool - Superseal Series 1.5

• All steel construction with anti-slip handles and hardened and tempered jaws. • For use on Superseal Series 1.5 terminals. Model No. • Parallel jaw movement ensures SEA AK3859 consistent crimp tension.

Model No. SEA RE2311 142pc Adhesive Lined Heat Shrink Terminal Assortment - Blue, Red, Yellow

140pc Yellow Crimp Terminal Assortment

• Transparent heat shrink terminals. • Adhesive lined. • Assortment of ring, butt, male Model No. and female spade and SEA AB037HT push-on terminals.

• Crimp terminals assortment. • Supplied in partitioned box.

280pc Blue Crimp Terminal Assortment

260pc Red Crimp Terminal Assortment

• Crimp terminal assortment. • Supplied in partitioned box.

Model No. SEA AB040BT

• Crimp terminals assortment. • Supplied in partitioned box.

Model No. SEA AB041YT

Model No. SEA AB039RT

Diesel Engine Setting/Locking Kit - VAG 1.2D, 1.6D, 1.9D, 2.0D TDi Common Rail - Belt Drive

• For VAG 1.4D, 1.9D, 2.0D TDi PD (Pumpe Duse) and 1.2D, 1.6D, 1.9D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner. • Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins. Model No. • Use with Associated Tool - Model No. VSE5752 Tensioner Adjuster Set. SEA VSE2358

Diesel Engine Setting/Locking Kit VAG 1.4D, 1.6D, 2.0D Common Rail Belt Drive

• Covers the new generation three- and four-cylinder common rail diesel engines. • Includes the tools required for setting the camshaft drive gears within the cylinder head.

• Allows checking of wear of the timing chain on a range of BMW Mini petrol engines with the minimum amount of dismantling. • This saves a significant amount of time when checking for timing chain stretch and wear.

Model No. SEA VSE2090

Petrol Engine Setting/Locking Kit VAG 1.2, 1.4TFSi, 1.4, 1.6FSi Chain Drive

Petrol Engine Setting/Locking Kit Ford, Mazda, Volvo 1.25, to 2.3 16v Duratec - Belt/Chain Drive

• Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines. • Kit contains essential tools for crank TDC positioning, Model No. camshaft setting and SEA VSE5956A tensioner locking.

• Covers the complete range of Ford Duratec engines 1.25 through to 2.3 16v in both belt and chain drive variants.

Diesel Engine Setting/Locking Kit Renault, Nissan 1.5dCi, Suzuki DDiS, Dacia dCi - Belt Drive

Timing Chain Wear Indicator BMW Mini

Model No. SEA VSE2381

Petrol Engine Setting/Locking Kit Vauxhall/Opel, Suzuki 1.0, 1.2, 1.4 Chain Drive

Model No. SEA VSE5515

Diesel Engine Setting/Locking Tool Kit PSA, Ford, Volvo 1.4D/1.5D/1.6D HDi/TDCi Belt Drive

• Includes locking tools for 1.0, 1.2, 1.4 EcoTec/ecoFLEX (codes X and Z) chain engines. • Also includes the timing disc Model No. position gauge for the timing SEA VSE243 sensor on the inlet camshaft.

Crankshaft Pulley Holder - Honda

• Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt. • Suitable for most Honda vehicles fitted with hydraulic PAS. • Use with 1/2"Sq drive breaker bar.

• Essential Tools for timing belt replacement on Renault/Nissan 1.5D dCi diesels. • Covers engine codes K9K. Model No. • These engines are also fitted in Suzuki and Dacia models. SEA VSE1901A

• Set of locking pins for timing belt replacement on Ford 1.5, PSA 1.4 (DV4) and 1.6 (DV6) diesel engines fitted in Citroen, Peugeot, Ford, Mazda, Suzuki, Toyota and Volvo models. • These timing pins lock and hold the camshaft, Model No. crankshaft, flywheel and HP SEA VSE5846 pump in the timed position.

Petrol Engine Setting/Locking Kit VAG 1.2 3Cyl (6v/12v) Chain Drive

Diesel Engine Setting/Locking Kit Alfa Romeo, Fiat, Ford, Suzuki, GM 1.3D 16v - Chain Drive

Diesel Engine Setting/Locking Kit Vauxhall/Opel, Saab 1.9D CDTi/TiD/TTiD, 2.0D CDTi - Belt Drive

• Contains camshaft setting tools and flywheel locking pin for timing 1.2, 3 cylinder, 6 and 12 valve chain drive engines. • These engines are fitted Model No. in Seat, Skoda and VW SEA VSE5921 vehicles.

• Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines. Model No. • Set also includes a SEA VSE5881A tensioner locking pin.

• Suitable for timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9D CDTi/TiD/TTiD or 2.0D CDTi engines. • Kit contains camshaft setting Model No. tools, crankshaft locking tool SEA VSE5886A and tensioner pin.

Model No. SEA VSE5048

Petrol Engine Setting/Locking Kit Fiat, Ford, Lancia 1.2, 1.4 8v Belt Drive

• Consists of camshaft setting plate, crankshaft locking tool and belt tensioner adjuster for the 1.2 engine. • Additional sprocket locking tool and alignment fixture Model No. for the camshaft sensor SEA VSE5061 on the 1.4 VVT engine.

Auxiliary Stretch Belt Removal/Installation Tool

• Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering. • Prevents damage to the pulley and prolongs the Model No. life of the belt. SEA VS787 • Fits most crankshaft pulleys.

Diesel/Petrol Engine Setting/Locking Combination Kit - Ford, PSA Belt/Chain Drive

• Suitable for a wide range of belt or chain driven petrol and diesel engines. • Contains a camshaft sprocket Model No. puller and flywheel locking SEA VSE5042A tools.

Petrol Engine Setting/Locking Kit GM, Saab - EcoTec 1.4, 1.6, 1.8, 2.0, 2.2 16v Belt Drive • Designed to fit between camshaft sprockets to maintain camshaft timing position. • Essential tools for timing belt replacement applications. • Supplied as a pair. Model No.

SEA VS1700

Petrol Engine Setting/Locking Kit Vauxhall/Opel, Chevrolet 1.0, 1.2, 1.4 & 1.6 - Chain Drive

• Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. • Includes the necessary tools for setting and locking the camshafts and crankshaft Model No. and the pins for locking SEA VSE5007 the timing chain tensioner.

Flywheel Locking Tool

Diesel Engine Setting/Locking Kit - 1.2D, 1.4D & 1.9D TDi Pumpe Duse Belt Drive

• For VAG 1.2D, 1.4D & 1.9D TDi PD (Pumpe Duse) engines with Hydraulic Belt Tensioner. • Kit includes crankshaft locking tool (round gears), plus camshaft and tensioner locking pins. • Use with Associated Tool Model No. Model No. VSE5752 SEA VSE2356 Tensioner Adjuster Set.

Diesel Engine Setting/Locking Kit -VAG, Dodge, Ford, Mitsubishi - 1.2D, 1.4D, 1.6D, 1.9D, 2.0D Belt Drive

• The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. • This locking tool securely locates in the starter ring gear teeth and fixes to the housing using manufacturer’s guidelines. • Applications: Citroen, Fiat, FSO, LDV, Mercedes, Peugeot. Model No. • Suitable for petrol SEA VSE2394 and diesel engines.

• Also covers these engines fitted in Ford, Dodge and Mitsubishi models. • Kit contains crankshaft locking tools for both oval and round crank gears, Model No. camshaft locking pins and SEA VSE5951 tensioner adjustment tools.

Fuel Pump Drive Belt Kit - VAG 2.7D - 3.0D

Petrol Engine Setting/Locking Kit Ford 1.6Ti-VCT - Belt Drive

• Designed to lock the fuel pump into its timed position so that the fuel pump drive belt can be replaced or the fuel pump timing checked.

Model No. SEA VSE3142

• Covers timing belt replacement and timing adjustment on Ford 1.6Ti-VCT petrol engines. • Includes VCT setting plate, flywheel locking tool, camshaft and tensioner pins. • Also includes camshaft Model No. setting plate for timing SEA VSE5041A adjustment applications.

Diesel Engine Setting/Locking Kit Vauxhall/Opel 2.0D • Designed for Vauxhall/Opel/ Chevrolet 2.0D common rail diesel engine. • Locks the engine in the correct position whilst changing the timing belt on the SOHC 16v engine range. • Supplied in storage case with instructions and warning tag.

Model No. SEA VSE5009

Oil Drain Plug Thread Repair Set M15

17pc 3/8"Sq Drive Impact Socket Set Metric

• Ideal for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer. • Tap Size: M15 x 1.5mm.

• Standard depth WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. • Contents: Sockets; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm, Extension Bars; 75, 150mm, 3/8"Sq Drive Universal Joint, Adaptor 3/8"Sq(F) x 1/2"Sq(M).

Model No. SEA VS615

Model No. SEA AK68217

25pc 1/2"Sq Drive Impact TRX-Star*/Hex/Spline Bit Set

5pc Bi-Directional Ratchet Tap & Die Holder Set

• Comprehensive set of TRX-Star*, Hex and Spline bits in Chrome Molybdenum steel, including a 1/2"Sq Drive bit holder with 2mm grub screw. • Phosphate finish for corrosion resistance. • Suitable for use with any impact tool. • Contents: Bits; TRX-Star* - T30, T40, T45, T47, T50, T55, Model No. T60, T70, Hex - 6, 7, 8, 10, 12, 14, 17, 19mm, Spline - M6, M8, SEA AK5612 M9, M10, M12, M14, M16, M18, 1/2"Sq Drive Bit Holder.

• Set consists of long handled 72-tooth reversible ratchet, die holder with three retention screws suitable for dies M3-M12, tap holder, 3mm hex key and T-bar. • Supplied in a heavy-duty storage case with foam inlays.

42pc 3/8" & 1/2"Sq Drive TRX-Star*/Hex/ Spline Bit Set

• Manufactured from Chrome Vanadium steel. • Long and short TRX-Star*, spline and hex bits. • Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors. • Convenient high impact Model No. carry-case presents bits at SEA AK219 an angle for easy selection.

14mm 3/8Sq Drive 12-Point Spark Plug Socket with Universal Joint 150mm

• Designed for use where plug clearance is tight. • Standard depth, thin wall, Chrome Vanadium 12pt 3/8Sq drive 14mm socket with magnetic insert to retain spark plug. • Features a universal joint with a built-in 85mm extension for ease of access.

Model No. SEA AK6570

3/4Sq Drive 12pc Impact Socket Bit & Accessories Set

• Phosphate finish for added corrosion resistance. • Suitable for use with any impact tool. • Contents: Bits; TRX-Star* - T70, T80, T90, T100, Hex - 14, 17, 19, 21, 22mm, Adaptor; 1/2(M) x 3/4(F)Sq Drive, 3/4Sq Drive Extension Bar - 200mm, 3/4Sq Drive Bit Holder. • Overall Bit Length: 65mm Model No. • Supplied in storage case.

SEA AK5617

14mm 12-Point 3/8"Sq Drive Spark Plug Socket with Magnetic Retainer

• Designed for use where plug clearance is tight. • Thin wall 12pt 14mm socket. • Magnetic insert to retain Model No. spark plug. SEA AK6568 • Application: BMW.

Model No. SEA AK3027

3pc Glow Plug Socket Set

• Specialised socket set consisting of 8, 9 and 10mm sockets. Designed to remove and install glow plugs without having to cut the power lead off. • Applications include Model No. Alfa Romeo, Fiat, GM and SEA SX4033 PSA engines.

8pc Impact Socket Adaptor Set

• Manufactured from drop-forged Chrome Vanadium steel with phosphate finish for added corrosion resistance. • Sizes: 1/4"(F) x 3/8"(M), 3/8"(F) x 1/4"(M), 3/8"(F) x 1/2"(M), 1/2"(F) x 3/8"(M), 1/2"(F) x 3/4"(M), 3/4"(F) x 1/2"(M), 3/4"(F) x 1"(M), 1"(F) x 3/4"(M).

Model No. SEA AK5900

ProJump Booster Cables with Electronics Protection

• Surge and spike protection fitted in-line with heavy-duty booster cables. • Clever traffic light LEDs show when protection is in place and it is safe to proceed jump starting.

Model No.

System Voltage

Cable Section

Capacity

Length

12V

20mm2

400A

12/24V

25mm2

450A

SEA PROJ/12 SEA PROJ/12/24

1000W Induction Heater

• • • • • •

590pc 50, 100, 150 & 200mm Heat Shrink Tubing Assortment - Mixed Colours

Mobile induction heater for fast heat delivery. Install appropriate coil and place over or around ferrous metal. Ideal for loosening stubborn and seized fixings. Supplied with induction pad for plastic trim/sticker removal. Induction element delivers high heat fast and effectively. Contents: Direct Coil; Ø20, Ø32mm, Pad Coil; Ø55mm, U-Coil; 430mm, Flex Coil; 830mm.

Airbag Test Resistor Set

• Assists in the diagnosis of airbag units and seat belt pretensioners. • Connect in place of an airbag or seat belt pretensioner unit to test for component failure. • Contains a two ohm resistor and two probe leads. • Always follow manufacturers instructions when testing SRS systems and components.

Model No. SEA ABTR01

Model No. SEA VS240

6pc Noid Light Test lead Set

• Kit provides an easy to use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits. • Bright clear LED lights give a clear indication of switching on low tension circuits and relays. • The 4mm female sockets allow the probes to be used on any multimeter with 4mm male leads. Model No. • Fine probe pins offer SEA NLTS01 universal connectivity.

• • • •

Thin wall heat shrink tubes. RoHS compliant. Shrink Ratio: 2:1. Lengths: 50, 100, 150 & 200mm.

Model No. SEA HST590MC

Auto Electronics Protection Devices

• Fits across battery to protect against voltage surges. • Ideal when welding, cutting and jump starting. • Protects coded radios, Model No. alarms, ECUs, fuel tank senders plus much more. SEA PROSAF/12 • Fitted with heavy-duty, fully SEA PROSAF/24 insulated battery clips.

System Voltage 12V 24V

100A Combined Battery Support Unit & Charger

• Professional combined battery support unit and charger designed to supply power for prolonged use during vehicle software updates or for showroom demonstration. • High frequency power supply utilises a microprocessing CPU controller when charging a battery and providing support during electronic diagnostic checks. • Up to 100A supply at 13.5V/14.5V & 14.8V • Designed for use with lead-acid batteries including WET, GEL and AGM types on 12V systems. • Includes a function to recharge a deeply discharged battery. • Safety circuitry which includes reverse polarity protection, short circuit protection, overload protection and the detection of voltage errors. • Once fully charged, the battery may be left connected to be automatically conditioned and maintained.

Model No. SEA BSCU100

Oil Filter Claw Wrench 63-103mm Capacity 3/8" & 1/2"Sq Drive

Self Adjusting Oil Filter Pliers Angled

Vauxhall/Opel Oil Filter Drain Funnel

• 30° Angled head allows access to previously impossible to reach areas. • Jaws auto-adjust with one hand operation. • Layered steel construction for Model No. added strength. SEA AK6421 • Capacity: Ø60-120mm

• Designed to reduce the amount of time taken to replace the engine oil filter on Vauxhall/Opel vehicles fitted with the B20 diesel engine. • Once the Drain Funnel is located, oil draining from the oil filter can be channelled into a suitable receptacle. • Time saving tool as it eliminates oil spillage onto vehicle chassis and components during filter change.

Oil Filter Cap Wrench Ø84mm x 14 Flutes - Mercedes Bluetec

Oil Filter Cap Wrench Ø90mm x 15 Flutes - Jaguar/Land Rover

Ø50-175mm Triple Leg Glaze Breaker 75mm Medium Stones

• Cap type oil filter wrench. • 3/8"Sq Drive for use with torque wrenches. • Designed for use on Mercedes Sprinter vans with 3L petrol and diesel engines. • Also fits Mercedes C Class V 3.0, R320 CDI, ML320 CDI SUVs. • Not suitable for impact use. • 3/8"Sq Drive Ø84mm x 14 flutes.

• Cap type oil filter wrench. • 3/8"Sq Drive for use with torque wrenches. • Designed for use on Jaguars and Land Rovers. • Applications: Jaguar; XF, XJ (10-17), XFR, XJL, XK, XKR (10-16), Land Rover LR4, Range Rover, Range Rover Sport (10-17). • Not suitable for impact use. • 3/8"Sq Drive Ø89mm x 15 flutes.

• For removal of heat glaze and carbon deposits on cylinder walls. • Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. • Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Model No. • Adjustable spring tension gives finish control. SEA VS162

• Also suitable for use with a 21mm spanner. • Claws grip filter tighter as more torque is applied.

Model No. SEA AK642

Model No. SEA VS7117

Battery Post & Terminal Cleaner

4-Way Battery Post & Terminal Cleaner

• Wire brushes remove corrosion build-up on battery posts and terminals for improved electrical contact. Model No.

SEA AK417

Battery Carrier

• Tubular steel handle with comfort grip. • Enables fast, safe handling of batteries. • Fully adjustable for battery size.

• Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact. • Features clamp reamer and terminal scrapers.

Battery Terminal Puller • Mini puller with spring loaded jaws designed for removal of corroded battery clamps from terminals. • Suitable also for removal of small gears, pulleys and bearings.

Model No. SEA AK418

Model No. SEA AK419

Heavy-Duty Wiper Arm Puller

Hand-Held Brake Pipe Bender

• Heavy-duty construction with locking feature allowing secure fastening to the wiper arm before commencing pull. • With swivel mounted thrust bearing and tommy bar, the tool releases the most stubborn wiper arms. • Also suitable for battery terminal and alternator bearing removal. • Maximum Opening: 28mm. • Maximum Collar Size: 43mm.

• Provides two sizes of bend for accurate and safe shaping of automotive brake pipes without risk of kinking. • Fitted with a 6mm hex slot for ease of holding/turning.

Model No. SEA BT91/9

Model No. SEA VS807

5pc Brake Caliper Slogging Wrench Set

• Used for installing and removing of the brake caliper bolts on commercial vehicles. • Designed with a 3/4"Sq drive for use with a torque wrench. • Formula for calculating the correct effective length lasered on wrench. • Two striking faces for access and aiding in loosening of bolts. • 3/4"Sq Drive TRX-Star*; E18, E20, E24 and Bi-Hex (12pt); 24, 26mm. • TRX-Star* Applications: E18 - Man TGL/TGM, E20 - Man TGL/TGM, E24 - Man TGA/TGS/TGX. • Bi-Hex (12pt) Applications: 24mm - SAF, 26mm DAF XF/XF95/XF105/XF106.

Model No. SEA VS7120

Model No. SEA VS5053

Model No. SEA VS0375 20pc Cleaning & Decarbonising Brush Set

Model No. SEA CV212

• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. • Supplied in sizes from Ø9-19mm in brass, nylon and steel. • Features quick release extension bar for increased reach.

Model No. SEA VS1800

Ethylene Glycol Antifreeze Tester Twin-Rotor

Propylene Glycol Antifreeze Tester Twin-Rotor

Propylene Glycol Antifreeze Tester Disc Type • Tests modern propylene glycol coolant antifreeze, hot or cold. • Protection level is indicated by the number of discs floating in the sample. • Easy-to-read temperature table. • Tough, virtually unbreakable, plastic body.

• Tests ethylene glycol antifreeze mixtures. • Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. • Freeze protection level is indicated on the scale in degrees Celsius.

Model No. SEA VS4120

• Tests propylene glycol antifreeze mixtures. • Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. • Freeze protection level is indicated on the scale in degrees Celsius.

Model No. SEA VS4121

Model No. SEA AK4122

Ethylene Glycol Antifreeze Tester Disc Type

Ethylene Glycol Antifreeze Tester Dial Type

Battery Fluid Tester Dial Type

• Checks condition of coolant antifreeze, hot or cold. • Protection level is indicated by the number of discs floating in the sample.

• Tests ethylene glycol strength with engine hot or cold. • Composite body and rubber bulb for workshop durability.

• Tests 6, 12 and 24V batteries. • Composite body and rubber bulb for workshop durability.

Model No. SEA AK4120

Model No. SEA AK409

Battery Fluid Tester Tube Type

Ethylene Glycol Antifreeze Tester Tube Type

• Professional battery hydrometer. • Float gauge and thermometer built-in.

• Professional antifreeze tester. • Thermometer built-in for calibration.

Model No. SEA AK414 Refractometer Antifreeze/Battery Fluid/ Screenwash/AdBlue®

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue®. • Temperature corrected prism ensures accuracy. Model No. • Eyepiece with adjustable focus. SEA VS0052 • Supplied with pipette and storage case.

Model No. SEA AK413

Refractometer Antifreeze/Battery Fluid/ Screenwash

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology) and G13. • Temperature corrected prism ensures accuracy. Model No. • Eyepiece with adjustable focus. SEA VS005 • Supplied with pipette and storage case.

2L Battery Fluid Filler

• Battery top-up jug with push release spout to minimize spillage.

Model No. SEA AK410

Model No. SEA JBF1

Battery Fluid Filler

• Fluid transfer tool suitable for battery top-up and level adjustment of coolant and screen wash. Model No. • Spout Length: 130mm. SEA AK4124 • Bulb Capacity: 150ml.

Clip-On Ammeter 30-0-30Amp

Clip-On Ammeter 75-0-75Amp

Battery Terminal Crimping Tool

• Moving-coil style meter suitable for testing DC current and direction without breaking circuit. • Ø55mm Dial face with spring loaded induction clip.

• A quick and effective way of crimping battery terminals using either a hammer or vice. • Wide throat and spring controlled punch securely holds terminal in place for added security. • Compatible with battery terminals with a cross sectional area of 6, 10, 16, 25, 35 and 50mm².

Model No. SEA BT98/10

6-24V Circuit Tester

Model No. SEA BT98/11

LED Battery/Alternator Tester 12V

• Suitable for 6-24V DC circuits. • Knurled brass body with test light. • Probe tip is covered with protective brass screw cap. • Tester illuminates when voltage is present. • Supplied with cable and alligator earth clip.

Model No. SEA AK422 12V Digital Battery & Alternator Tester

Model No. SEA AK4008 3-48V Circuit Tester • Tests electrical circuits from 3 to 48V DC. • Integral, spring loaded, pointed probe for testing through insulation. • Twin LEDs indicate live circuit and polarity. • 0.9m Cable with insulated crocodile earth clamp.

• LED Indicators verify condition of battery and alternator. • Suitable for 12V DC systems. • Magnetic backing sticks to metal surfaces for hands-free operation. • Fitted with 900mm of cable, probe and crocodile clips.

Model No. SEA AK4051

Model No. SEA AK400 6-42V Open & Short DC Circuit Detector

60pc Crocodile Clip Assortment Red & Black

• Compact device which accurately tests battery, cranking and alternator. • Just key in the battery rating from the top of the battery and results are displayed on LCD screen. • Includes a facility to print results via PC. • No internal battery and will test batteries with a residual charge of just 8V. • Supplied with PC software Model No. and instruction manual in SEA BT105 storage pouch.

6/12V Battery Drop Tester

• Find short and open circuits fast and easily. • Simply attach the sender unit to the circuit and follow the wires using the detector. • Ideal for automotive repairs. • Suitable for all DC circuits up to 42V. • Supplied in carry-case. • Powered by two Model No. 9V batteries. SEA FF400

• Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8).

Digital Battery & Alternator Tester with Printer

• Diagnosis of battery and alternator faults with the facility to print the results. • Test battery condition with as little as 1.5V of residual charge. • Checks condition of alternator, no complicated connections or interpretation required. • Analyse the vehicle’s charging system at rest and under load to determine condition of the alternator. • Suitable for use on motorcycle, cars (including start/stop) and commercial vehicles. • Test results shown on-screen and also printed out at the end of the test. Model No. • Supplied in carry-case with batteries, two rolls SEA BT2014 of printing paper and instruction manual.

Model No. SEA AB023CA

• Load applied by internal switchgear - no sparking! • Applies load across cells and measures output on meter. • Accurate indication of Model No. battery voltage and faulty or short circuited cell. SEA BT91/7

12V Battery Drop Tester

• Traditionally styled drop tester for all 12V automotive batteries. • Applies load across cells and measures output on meter. • Accurate indication of battery voltage, faulty cell and short circuited cell.

Model No. SEA BT91/3

Wall or Floor Mounting Extending Tyre Rack - 200kg Capacity

Two Level Mobile Tyre Rack 200kg Capacity Per Level

Wheel Storage Trolley 100kg Capacity

• Stores wheels with rims up to 225mm. • Rack has four locking castors for easy manoeuvring. • Eliminates tyre distortion due to loss of tyre pressure. • Easy to assemble. • Supplied with rim protecting supports. • Overall Size (W x D x H): 460 x 460 x 1160mm. • Maximum Weight Capacity: 100kg (25kg per Level).

Model No. SEA STR004 • Wall or floor mounting rack helps keep work area tidy. • Steel construction with a powder coated finish giving corrosion resistance. • Adjustable width to suit space available. • Holds up to 90kg when wall mounted. • Overall Size (W x D x H): 1680 x 740 x 710mm. Model No. • Min./Max. Useable Width: SEA STR001 1215/1570mm.

Tyre Storage/Transport Dolly

• Two level mobile tyre rack helps keep working area clear. • Unit is on wheels for easy manoeuvrability when needing to take the tyres to point of work, ideal for use track side. • Stores up to 12 tyres, 6 per level. • Overall Size (W x D x H): 915 x 455 x 1700mm. Model No. • Maximum Capacity: SEA STR002 400kg (200kg/Level).

19L Bead Seating Tool Lever Trigger

Puncture Repair Rasp Fine

• Used to clean and widen the puncture before repairing a tubeless tyre. • Suitable for car, commercial, agricultural Model and off road vehicle tyres.

No. SEA TST12

• Tyre storage/transport dolly ideal for use with up to eight tyres. • Four Ø75mm swivel TPR castors, one featuring a brake. Overall Size (W x D x H): 640 x 640 x 110mm. Model No. • Maximum Weight Capacity: SEA STR006 136kg.

Tyre Valve Core Tool

• Dumps air into tyre void forcing bead to seat against rim for inflation. • Air release is controlled by a hand lever operating a ball valve. • Fully certified tank with Model No. gauge and safety valve SEA TC900 prevents over pressurising.

500mm Tyre Lever

• Used for removal and installation of the core from a wheel valve. • Features easy grip handle and ideal for the busy workshop. • Suitable for motorcycles, cars and commercial vehicles.

Torque Limited Tyre Valve Tool

• Forged Chrome Vanadium steel. • Hook and taper ends.

• Pocket size tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS. • Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs. • Preset Torque Value: Model No. 0.45Nm(4lb.in). SEA TST18

Model No. SEA VSTL500

Model No. SEA TST/VCT Alloy Rim Tyre Valve Installer

Digital Tyre Pressure & Tread Depth Gauge

• • • •

• Tyre pressure gauge with integral tread depth gauge and work light. • Push-button operation with backlit LED display for tyre pressure. • Read-out available in bar, psi, kg/cm² or kPa. • Integral tread depth gauge reads up to 20mm. • Auto power-off.

Simplifies installation of tyre valves in tubeless wheels. Pulls tyre valve assembly through rim. Shank is notched to accommodate various rim styles. Manufactured from resilient nylon to minimise damage and marking to alloy wheels. • Features a valve core removal tool mounted in the base of the handle. • Length: 270mm.

Model No. SEA TST04

Tyre Tread Depth Gauge Pocket Type

• Chromed steel body with pocket clip. • Scale from 0 to 25mm in 1mm(0-1" in 1/32") graduations.

Model No. SEA TST/DGE

Tyre Inflator with Clip-On

Tyre Inflator 0.5m Hose with Twin Push-on Connector

Digital Tyre Inflator 0.5m Hose with Push-On Connector

• Composite body and dial type gauge with rubber protector. • Range: 0-10bar/0-145psi. • Fitted with 500mm rubber hose and single clip-on connector.

• Manufactured to comply with EN 12645. • Aluminium body with rubber bumper. • Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • Range: 0-9.6bar(0-140psi)

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. • Auto power off after eight seconds and auto power on once pressure is sensed, or air inflation starts. • 0.5m Flexible hose fitted with Model No. 240mm push-on air connector.

Model No. SEA SA9302

Model No. SEA SA371

Tyre Inflator 2.5m Hose with Twin Clip-On Connector

Tyre Inflator 2.7m Hose with Clip-On Connector

• Manufactured to comply with EN 12645. • Aluminium body with rubber bumper. • Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • Fitted with 2.5m hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. Model No. • Range: 0-9.6bar(0-140psi).

• Manufactured to comply with EN 12645. • Aluminium body with rubber bumper. • Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • 2.7m Flexible hose fitted with 240mm clip-on air connector. • Range: 0-9.6bar(0-140psi)

Model No. SEA SA372

SEA SA37/95

SEA SA374

Digital Tyre Inflator 2.7m Hose with Clip-On Connector

• Die cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. • Auto power off after eight seconds and auto power on once pressure is sensed, Model No. or air inflation starts.

SEA SA375

Professional Tyre Inflator with Twin Push-On Connector

Professional Tyre Inflator with 2.7m Hose & Clip-On Connector

• Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • 330mm Flexible hose fitted with 240mm, twin push-on, air connector. Model No. • Range: 0-9.6bar(0-140psi). SEA SA37/93 • Supplied with a serial numbered calibration certificate.

• Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • Fitted with 2.7m hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. • Range: 0-9.6bar(0-140psi). • Supplied with a serial numbered calibration certificate.

Model No. SEA SA37/94

Long Type Tyre Inflator with Twin Push-On Connector

Tyre Inflator with 2.75m Hose & Clip-On Connector

Tyre Inflator with Clip-On Connector

• • • •

• Heavy-duty extruded aluminium body and zinc head. • Linear pressure scale, dual calibrated in psi and bar. • 2.75m Hose for compliance with safety regulations relating to inflation of commercial and Model No. agricultural vehicle tyres. SEA SA396 • Range: 0-9.5bar(0-140psi).

• Heavy-duty extruded aluminium body and zinc head. • Linear pressure scale, dual calibrated in psi and bar. • 350mm Rubber hose with steel protection sleeve. Model No. • Range: 0-9.5bar(0-140psi). SEA SA395 • Fitted with clip-on connector.

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale dual calibrated in psi and bar. Range: 0-9.5bar(0-140psi). 350mm Rubber hose with steel protection sleeve. Model No. • Fitted with twin, push-on SEA SA39 air connector.

Pneumatic Vacuum Brake Bleeder 1L

Brake & Clutch Bleeding System

Brake & Clutch Bleeding System Universal Adaptor

• Universal reservoir cap for Model No’s VS820, VS821 & VS0204A Brake & Clutch Bleeding System. • Supplied with quick connect.

Model No. SEA VS820UA

• The simple way to bleed hydraulic brakes. • One-man operation. • No special reservoir caps required. Model No. • Uses regular 90psi air SEA VS020 supply.

• Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry. • Pressure range makes unit suitable for use with ABS systems. • Fitted with Ø45mm cap with 90° angled connector Model No. which is suitable for SEA VS820 most European models.

Automatic Brake & Clutch Bleeder

Brake & Fuel Pipe Inspection Tool

Gravity Brake Bleeder Kit

• Ingenious patented design maintains the fluid level in the vehicle’s brake or clutch fluid reservoir during the bleeding process. • Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Model No. • Fast, simple to use and features SEA VS0209 on/off flow valve.

Brake Reservoir Cap 45mm Straight Connector • Fast, easy and effective bleeding of brakes and clutch using air from tyre. • Innovative design incorporates valve for control of air pressure, extra long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. • Suitable for use with ABS systems. Model No. • Supplied with range of SEA VS0205 common adaptors.

• Specially designed for the removal of corrosion from brake and fuel pipes for fast and thorough inspection. • Features 12 cleaning edges for different sizes and types of pipes. • Includes curved cleaning edges for hard-to-reach areas. • Applications: 3.5mm (Citroen), 4, Model No. 4.75mm; 3/16" Pipes. SEA VS0210 • MOT Compliant tool.

12V Brake & Clutch Pressure Bleeding Kit

• Powered by the vehicle’s own 12V battery. • Allows single-handed bleeding of the vehicle’s brake or clutch system and unit is fitted with a long, high pressure hose. • Bleed pressure is closely controlled up to 2.5bar - suitable for most vehicles (even those with ABS). • Unit fitted with auto-shut-off device to prevent the system running dry and is supplied with a variety of European, Japanese and US vehicle adaptors, bleed bottle and fluid extractor. Model No. • Tank Capacity: 2L. SEA VS0207 • Cable/Hose Length: 4/5m.

• For use in conjunction with Model No’s VS820, VS821 & VS0204A Brake & Clutch Bleeding System. • Brake reservoir cap Ø45mm with straight connector.

Model No. SEA VS820SA

Pneumatic Brake & Clutch Pressure Bleeder Kit

• Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. • Large reservoir (5L) means reduced risk of running the system dry during bleeding process or complete fluid change. • Suitable for use on ABS systems. • Features a long delivery hose (3.7m) for operation with a low level ramp, and long reach handle for easy mobility. Model No. • Supplied with a range of European, Japanese and SEA VS0204 US vehicle adaptors.

7pc GripMAX® Screwdriver Set

• High quality Chrome Vanadium satin finished shafts with shot blasted and magnetized tips. • Ergonomic polypropylene and TPV rubber soft grip handles maximize power transfer from hand to fixing. • Includes hanging hole. • Contents: Slotted; 3 x 75, 4 x 100, 6 x 150, 8 x 200mm, Phillips; #0 x 75, #1 x 75, #2 x 100mm.

10pc GripMAX® TRX-Star* Screwdriver Set

Model No. SEA AK4321

• High quality Chrome Vanadium satin finished shafts with shot blasted and magnetized tips. • Ergonomic polypropylene and TPV rubber soft grip handles maximize power transfer from hand to fixing. • Includes hanging hole for alternative storage. • Contents: TRX-Star*; T7 x 75, T8 x 75, T9 x 75, T10 x 100, T15 x 100, T20 x 100, T25 x 100, T27 x 100, T30 x 100, T40 x 125mm.

Model No. SEA AK4324

3V Vacuum Drill Dust Extractor

Damaged Glow Plug Removal Set 8 & 10mm

• 3V Vacuum holds unit to the wall for easy drilling. • Suitable for drill bits up to 13mm. • Features a horizontal and vertical spirit level for accurate positioning. • Laser light on the bottom for accurately positioning of holes, for example in a sequence or a square. • Removable dust collection pod for easy emptying. • Powered by 2 x AA Batteries (not included).

Model No. SEA DDE01 Flat Wire Brush Ø100mm with 6mm Shaft • Designed to remove damaged/broken glow plugs from cylinder heads. • Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread. • Set includes all required adaptors for drilling, centring and pulling for the safe removal of glow plug.

Model No. SEA SX0408

• Suitable for use with power drills. Ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power.

Model No. SEA SFB100

5kg Anvil

11kg Anvil

• Bench mounting cast iron anvil, featuring single bick and rectangular working surface. • Rectangular Working Surface (W x D): 115 x 68mm. • Overall Size (W x D x H): 215 x 102 x 112mm.

• Bench mounting cast iron anvil, featuring single bick and rectangular working surface. • Rectangular Working Surface (W x D): 170 x 90mm. • Overall Size (W x D x H): 285 x 120 x 136mm.

Model No. SEA ANV5

Model No. SEA ANV11

150mm 3-Speed Metal Cutting Bandsaw

• Three speed settings. • Heavy-duty cast base and cutting arm. • Oil bath gear box and life lubricated bearings for quiet, smooth operation. • Full guarded blade and magnetic no-load voltage switch. • Complies with CE directive. • Stand is fitted with two transport wheels for added workshop mobility.

Model No. SEA SM5

Ø150mm Heavy-Duty Bench Grinder 450W

Ø150mm Heavy-Duty Bench Grinder with Wire Wheel 450W

• Fitted with induction motor drive, suitable for general workshop grinding and sharpening use. • Two aluminous oxide grinding stones, coarse and fine. • Fitted with stone guards, adjustable eye shields and spark arrestors. • Supplied with BS standard plug.

• Fitted with induction motor drive. • Suitable for general workshop grinding/sharpening and descaling/cleaning use. • One coarse aluminous oxide grinding stone and one wire wheel. • Fitted with stone guards, adjustable eye shields and spark arrestors. • Supplied with BS standard plug.

Ø150mm Bench Grinder 150W

• • • •

150W/230V, 2950rpm. Ready to use. Suitable for general workshop use. Supplied with one coarse and Model No. one fine wheel. • Fitted with eye shields. SEA BG150CX

Model No. SEA BG150XD/99

150mm Heavy-Duty Professional Cast Iron Fixed Base Vice

• • • •

Super quality cast iron construction. Replaceable steel jaws. Features an anvil. 2 Year guarantee against Model No. breakage. SEA CV150XT • Jaw Opening: 150mm.

200mm Heavy-Duty Professional Cast Iron Fixed Base Vice

• • • •

Super quality cast iron construction. Replaceable steel jaws. Features an anvil. 2 Year guarantee against Model No. breakage. SEA CV200XT • Jaw Opening: 200mm.

Bench Mounting Drill Bit Sharpener - 80W

Bench Mounting Multipurpose Sharpener - 65W

• Free Speed: 4200rpm. • Fast, simple and effective way to sharpen your drill bits. • Gives a perfect angle/sharpened head to make drilling with your bit easier. • Suitable for use with HSS Titanium, Cobalt and Carbon Steel bits in range Ø3-13mm.

• Portable electric multipurpose sharpener. • Aimed at the DIY user. • Sharpens all HSS drill bits from 3 to 10mm, straight edged knives and scissors. • Also re-grinds chisels and plane blades up to 50mm wide. • Free Speed: 6700rpm. • Wheel Diameter: Ø48mm.

Ø200mm Sharpener with Honing Wheel

• • • • • • •

180W Induction motor. Adjustable tool rest. Leather Honing Wheel: Ø200 x 30mm. Grinding Wheel: Ø200 x 40mm. No Load Speed: 95rpm. Model No. 220 Grit wheel. SEA SMS2101 Easy carry handle.

Model No. SEA SMS2008

Model No. SEA BG150XW/99

Model No. SEA SMS2004

Ø200mm Bench Grinder Variable Speed

200mm Bench Mounting Buffer Polisher 550W/230V

• Fitted with stone guards, adjustable eye shields and spark arrestors. • Substantial tool rests, one with angled cut-out assisting effective tool sharpening. • Variable speed allows for better control of grinding and sharpening. • Integral coolant tray for Model No. convenient cooling of SEA BG200WVS sharpened/ground item.

• Designed for quick and easy smoothing/ polishing of metal and other materials. • Efficient 550W motor provides sufficient power for most tasks. • Cast iron base reduces vibration. • Supplied with fine and coarse buffing/polishing wheels and fitted ASTA approved plug.

Model No. SEA BB2002

5pc Engineer’s File Set 200mm

40pc Tap & Die Set Split Dies - Metric

0-150mm(0-6") Digital Vernier Caliper

• Popular set of assorted files with comfort grip handles. • Each file is double cut for faster removal of material from workpiece. • Contents: Half-Round, Round, Square, Three-Square, Flat.

• Professional split dies with machined lead-ins for ease of use. • Die holder features self-centring mechanism for straight and accurate thread cutting. • Includes T-handled tap wrench and Metric screw Model No. pitch gauge. SEA AK3040 • Sizes: 3-12mm.

• 11mm LCD display. • Hardened and tempered stainless steel with satin finish. • Metric and Imperial readings with conversion between the two. • Zero setting control for comparative measurement. • Serial port connection for computer interface.

Model No. SEA AK573

Keyless Pillar Drill Chuck 16mm

• High carbon steel chuck suitable for models GDM50B - GDM200F (Except GDM180B). • Hand tightening of chuck collar grips drill bit securely with three high carbon steel jaws.

40-65mm Wood Mortising Attachment with Chisels • Suitable for use with Sealey and other leading makes of drill. • Includes three chisel and bit sets and four mounting rings. • Supplied in carry-case. • Collar Diameters: Ø40, 52, 55, 60, 65mm. • Chisel & Bit Sets: 1/4", 3/8", 1/2". • Not suitable for Model No’s SDM30, GDM50B, GDM150B, GDM180B, GDM200F, GDM200F/VS, PDM240F, PDM260F.

Model No. SEA GDMX/KC

Model No. SEA MA10

230mm Drilling Machine Work Grip

5-Speed Hobby Pillar Drill 580mm Ht 350W • • • • •

13mm(1/2") Capacity chuck. Fitted with no-volt safety switch. Height: 580mm. Chuck to Column: 104mm. Motor Power: 185W, Input Power: 350W. • Column Diameter: 46mm. • Spindle Travel: 50mm. • Weight: 15.6kg. • Based on the locking pliers principle. • Quick and easy to use. • Keeps operator’s hands away from the drilling area whilst keeping the workpiece firmly held.

Model No. SEA AK214

Model No. SEA SDM30

5-Speed Bench Pillar Drill 750mm Ht 370W

12-Speed Bench Pillar Drill 840mm Ht 370W

• Suits light industrial, agricultural and woodworking applications. • Fitted with rack and pinion feed shafts with adjustable preset depth control for repetitive work. • 16mm(5/8") Capacity chuck, MT2. • Height: 750mm. • Spindle Centre to Column: 127mm. • Motor Power: 220W, Input Power: 370W. • Column Diameter: 60mm. • Spindle Travel: 60mm. • Weight: 32kg.

• 16mm(5/8") Capacity chuck, MT2. • Fitted with no-load voltage switch and locking cover to prevent accidental starting. • Height: 840mm. • Spindle Centre to Column: 127mm. • Motor Power: 220W, Input Power: 370W. • Column Diameter: 60mm. • Spindle Travel: 60mm. • Weight: 32kg.

Model No. SEA GDM50B

Model No. SEA AK962EV

Model No. SEA GDM92B

3-Level Heavy-Duty Trolley

2-Level Heavy-Duty Trolley

• Garage or workshop trolley with a 50kg capacity per shelf. • Deep-walled shelves, which may be installed base down or base up to give either tool and component security or unobstructed access. • Four large castors, two fitted with a brake. Model No. • Size (W x D x H): SEA CX103 775 x 410 x 900mm.

• Garage or workshop trolley with a 80kg capacity per shelf. • Deep-walled shelves, which may be installed base down or base up to give either tool and component security or unobstructed access. • Four large castors, two fitted with a brake. Model No. • Size (W x D x H): SEA CX102 760 x 410 x 900mm.

• Sturdy steel construction workbench with a capacity of 300kg. • Two shelves that allow unobstructed access. • Heavy-duty handle. • Fitted with two fixed castors, Model No. two locking castors and a SEA AP1100M heavy-duty handle.

1m Workbench Steel with 1 Drawer

1.5m Steel Workbench with 1 Drawer

2m Steel Workbench with 1 Drawer

• Supplied with a single, lockable drawer. • Manufactured throughout from steel plate for industrial durability. • Size: (W x D x H): Model 1000 x 650 x 860mm.

• Supplied with a single, lockable drawer. • Manufactured throughout from steel plate for industrial durability. • Size (W x D x H): Model 1500 x 650 x 860mm.

• Supplied with a single, lockable drawer. • Manufactured throughout from steel plate for industrial durability. • Size (W x D x H): Model 2000 x 650 x 860mm.

12 Drawer Cabinet Box Red/Black

18 Drawer Cabinet Box Red/Black

39 Drawer Cabinet Box Red/Black

• Tough and durable housing, contains 12 impact resistant composite drawers. • Fitted with four fixing points for wall mounting or can be bench mounted (freestanding). Model No. • Overall size (W x D x H): SEA APDC12R 260 x 160 x 265mm.

• Tough and durable housing, contains 18 impact resistant composite drawers. • Fitted with four fixing points for wall mounting or can be bench mounted (freestanding). Model No. • Overall Size (W x D x H): SEA APDC18R 380 x 160 x 475mm.

• Tough and durable housing, contains 39 impact resistant composite drawers. • Fitted with fixing points for wall mounting or can be bench mounted (freestanding). Model No. • Overall Size (W x D x H): SEA APDC39R 380 x 160 x 475mm.

60 Drawer Cabinet Box Red/Black

34pc Wall Storage Pegboard Set

No. SEA AP1010

• Tough and durable housing, contains 60 impact resistant composite drawers. • Fitted with fixing points for wall mounting or can be bench mounted (freestanding). Model No. • Overall Size (W x D x H): SEA APDC60R 380 x 160 x 475mm.

2-Level Mobile Workbench

No. SEA AP1015

No. SEA AP1020

• Versatile wall storage panels which allow for tools to be positioned as required. • Two slotted panels with wall mounting kit. • Panel Size (x2) (W x H): 460 x 560mm. • Accessory Contents: Short Hook (x15), Long Hook (x5), Double Hook (x2), Pliers Holder (x3), Composite Box (x4), Spanner Holder, Screwdriver Holder, Drill Holder.

Model No. SEA S01102

13pc Body Panel Levering/Separating Tool Set

10pc 4.4kg Heavy-Duty Slide Hammer Set

• Heavy-duty slide hammer with 4.4kg sliding weight. • For use on body panels and vehicle chassis.

• Assortment of bodyshop tooling, designed for levering, separating and reforming of panels. • Maximum Bar Length: 900mm.

Model No. SEA CB50

Model No. SEA DP90

Heavy-Duty Compact Riveter with Collection Bowl

Wheel Dolly Set 680kg Capacity

• • • •

Can handle up to 250mm profiles. Fitted with four Ø75mm metal castors, two lockable. Heavy-duty steel plate with rust resistant finish. Each dolly features a side handle for easy carrying. Model No. • Suitable for use in SEA WS681 bodyshops and workshops.

2lb Ball Pein Hammer with Hickory Shaft

Rivet & Threaded Nut Rivet Kit

• Drop-forged frame with patented folding mechanism for compact storage. • Comfortable cushion grips. • Heavy-duty head suitable for fixing blind rivets and threaded nut rivets to thin sheet material. Model No. • Suitable for aluminium, SEA AK39602 steel and stainless steel.

• Aluminium body and high grade alloy steel jaws, with double handle bearings, provide effortless functionality. • Suitable for aluminium, steel and stainless steel blind rivets. • Includes Chrome Molybdenum Model No. special profile nozzle for SEA AK3982 6.4mm structural rivets.

• • • •

Double Lever Grease Gun

3-Way Fill Side Lever Grease Gun

• For use with screw type grease cartridges, using vacuum suction to ensure full utilization of grease cartridge, as well as eliminating priming issues associated with conventional grease guns. • Features a protective cap for hose storage preventing contamination. • 1/8"BSPT Thread and supplied Model No. with adaptor to fit most screw SEA AK4403 type cartridges on the market.

• Die-cast pump head. • Three-way fill with cartridge, bulk or manual capability. • Air bleed facility. • Accepts standard 400g cartridges. • Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. • Ideal for the busy automotive, agricultural or industrial workshop.

10tonne Straightener Kit with Variable Tilt

• Fully interchangeable parts and hydraulics. • Variable position upright allows six preset angles of pull plus a seventh upright position. • Supplied as standard with SuperSnap® manual hydraulic pump and ram. • Supplied with Pull Clamp (x2), Sill Clamp (x2), Chain (x2), Chain Hook (x2), Carriage Anchorage Tube, Tube Stand (x2).

Drop-forged steel head manufactured and approved to BS 876. High quality hickory shaft. Model No. Well balanced. Weight: 900g(2lb). SEA BPH32

Model No. SEA AK44

Masking Paper Dispenser Trolley 2 x 900mm

Model No. SEA DZRE92/C

• Two roll dispenser accepts rolls up to 900mm and features storage tray underneath dispenser unit. • Automatically applies adhesive tape to edges of masking paper. • Papers and tapes not included.

Model No. SEA MK67

12V Cordless Mini Sander/ Polisher Kit

• • • • •

Ø75mm Mini Air Polisher

Variable speed control up to 3000rpm. Soft grip handle for comfort and control. Locking swivel adjustment from pistol to straight type. Includes battery condition indicator. Supplied in canvas bag with 12V Lithium-ion battery pack, Model No. battery charger and a range of SEA CP2812V polishing and sanding heads.

Ø150mm Dust-Free Air Palm Orbital Sander

• Textured grip and lightweight aluminium alloy housing provide comfort and control. • Powerful air motor provides smooth operation under-load. • Supplied with Ø75mm hook-and-loop pad and spanner. Model No. • Use with Ø79mm buffing SEA GSA722 and polishing heads.

Air Adhesive Pinstripe Removal Tool

4pc Smart Eraser Air Tool Kit

• Ideal for removing pinstripes or double-sided tape from panel prior to refinishing. • Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control. • Air motor with quality bearings for smooth and powerful operation. • Exhaust outlet adjusts 360° keeping Model No. airflow away from operator. SEA SA95 • Suitable for the professional workshop.

• • • • • •

Ø100mm Angled Wire Wheel for SEA SA695

• Angled wire wheel for Model No. SEA SA695 Smart Eraser Kit.

Model No. SEA SA695WA

Complete kit for a variety of body preparation tasks. Includes pinstripe removing pad, abrasive wheel and two wire wheels. Air tool features two handles for maximum control during use. Supplied in storage case. Suitable for the professional workshop. All pads/wheels available separately.

Ø100mm Polycarbide Abrasive Wheel for SEA SA695

• Abrasive wheel for Model No. SEA SA695 Smart Eraser Kit.

Model No. SEA SA695A

Air Knife

• Fitted with dual bearings in eccentric assembly to maximise working life. • Exhaust muffler helps reduce noise emission. • Dust-free outlet for use with centralised dust extraction systems. • Supplied with Ø150mm hook-and-loop pad. • Free Speed: 10000rpm. Model No. • Orbit Size: Ø5mm. SEA SA09 • Weight: 1kg.

Model No. SEA SA695

Straight Wire Wheel Ø100mm for SEA SA695

Stripe Removing Pad

• Straight wire wheel for Model No. SEA SA695 Smart Eraser Kit.

• Suitable for use with SEA SA95, for removing pinstripes or double-sided tape from panel work prior to refinishing.

Model No. SEA SA695WS

Model No. SEA SA95/PX

6L Bazooka Bead Seating Tool • The next generation of bead blaster which produces a huge punch despite its size. • Dumps air into tyre void forcing bead to seat against rim for inflation. • Fully certified tank with gauge and safety valve that prevents over pressurising. • Push button trigger that allows the technician to keep both hands on the tank for more control. • Suitable for use on cars, light commercials and ATV tyres. • Supplied with safety spectacles, ear plugs and wall mounting bracket.

• • • • • •

Quickly and easily cuts windscreen bonding. Safety throttle prevents inadvertent starting. Speed control by integral regulator. Exhaust ducted away from work and operator. Supplied with offset straight blade and hex key. Wide range of optional blades available. Model No. • Air Pressure/Consumption: SEA WK025 90psi(13.2cfm).

Model No. SEA TC903

1/2"Sq Drive Composite Air Impact Wrench - Twin Hammer

• Working/Maximum Torque: 800lb.ft(1088Nm)/950lb.ft(1288Nm). • Ultimate Torque: 1050lb.ft(1428Nm). • Twin hammer design gives the wrench a high torque output making it suitable for jobs that would normally require a 3/4" impact wrench. • Two stage trigger design offers increased control with feather touch trigger for running up to 272Nm and fully depressed for full torque. • Features hammer cage support mechanism to reduce tool vibration while in operation. Model No. • Suitable for heavy-duty use SEA SA6006 in professional garages.

1/2"Sq Drive Composite Air Impact Wrench - Twin Hammer

1/2"Sq Drive Air Impact Wrench Twin Hammer

• Working/Maximum Torque: 800lb.ft(1084Nm)/1000lb.ft(1355Nm). • Ultimate Torque: 1320lb.ft(1789Nm). • Twin hammer design gives the wrench a high torque output making it suitable for jobs that would normally require a 3/4" impact wrench. Model No. • Suitable for heavy-duty use SEA SA6007 in the professional garage.

• Working/Maximum Torque: 400lb.ft(544Nm)/480lb.ft(653Nm). • Ultimate Torque: 500lb.ft(680Nm). • Powerful impact wrench with twin hammer mechanism for increased torque. • Air motor features quality bearings, ductile steel end plates and carefully finished components to ensure smooth running and maximum power. • Combination forward/reverse and speed selector. Model No. • Suitable for heavy tyre SEA SA602 shop use.

1/4"Sq Drive Air Impact Wrench Diesel Glow Plug Kit

1"Sq Drive Air Impact Wrench Straight Long Anvil

• Reduced torque impact wrench suitable for the removal of seized glow plugs. • Four-position air regulator - 10, 20, 30, 40Nm. • One-hand operation for trigger and forward/reverse control. • Includes 8, 9, 10, 11, 12mm deep impact sockets, Model No. 50mm extension bar and SEA SA141 universal joint.

• Working/Maximum Torque: 1170lb.ft(1591Nm)/1460lb.ft(1986Nm). • Ultimate Torque: 1520lb.ft(2067Nm). • Heavy-duty wrench suitable for commercial and agricultural vehicle use. • Long anvil and straight configuration with rocking-dog hammer for applications with restricted access. • Air Consumption: 15cfm. Model No. • Air inlet: 1/2"BSP. SEA SA29/S • Fitted with reverse action.

1/2"Sq Drive Air Impact Wrench

• Working/Maximum Torque: 200lb.ft(271Nm)/230lb.ft(312Nm). • Tough professional air impact gun with fully polished alloy housing and rubber bumper. • 4-Position adjustable air/ Model No. torque selection. SEA SA2 • Air Supply: 90psi - 4cfm.

34pc 1/2"Sq Drive Impact Socket Set - Metric

1/2"Sq Drive 110Nm Torque Stick • Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. • Prevents over-torque of wheel nuts. • Features a twist distortion marking for checking serviceability of tool.

4-Way Wheel Brace

Model No. SEA VS2245 385mm Deluxe Tyre Lever • Quality drop-forged and tempered steel with flat rounded tip. • Moulded handle enables extra grip. • Suitable for use with motorcycle, small agricultural or leisure tyres. • Contents: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm (1 of each Standard & Deep), Model No. 125mm Extension Bar, SEA AK5634M Universal Joint.

• Forged construction with hot forged sockets and baked finish. • Socket Sizes: 17, 19, 21, 22mm.

Model No. SEA VS1818

Model No. SEA AK2090

20m Retractable Air Hose Reel Ø10mm ID

15m Retractable Air Hose Reel Ø12.5mm ID

• Solid brass internal spindle for added strength and durability. • Self layering system provides tangle free operation. • Auto rewind mechanism. • Reinforced braided PVC hose. • Suitable for the professional workshop. • Supplied with heavy-duty swivel mounted wall bracket Model No. and 2m inlet hose. SEA SA93 • Inlet-Outlet: 3/8"BSPT.

• Solid brass internal spindle for added strength and durability. • Self layering system provides tangle free operation. • Auto rewind mechanism. • Reinforced PVC braided hose. • Suitable for professional workshop. • Supplied with heavy-duty swivel mounted wall bracket Model No. and 2m inlet hose. SEA SA94 • Inlet-Outlet: 1/2"BSPT.

15m Retractable Air Hose Metal Reel Ø10mm ID Rubber Hose

20m Retractable Air Hose Metal Reel Ø10mm ID Rubber Hose

8m Retractable Air Hose Metal Reel Ø10mm ID Rubber Hose

• Heavy-duty steel construction with corrosion resistant powder coated finish. • Nine-position guide arm with four non-snag rollers. • Multi-position ratchet lock. • L-Shaped bracket enables Model No. the unit to be wall, floor SEA SA84 or ceiling mounted.

Palm Type Air Blow Gun with Safety Nozzle

• Die-cast metal body with moulded handle and hanging point. • Palm type gun with thumb trigger control. • Supplied with jet and safety nozzle. Model No. • Maximum Operating SEA SA913 Pressure: 110psi.

180mm Palm Type Air Blow Gun

290mm Palm Type Air Blow Gun

Air Blow Gun with 200mm Lance

• Die-cast metal body with moulded handle and hanging point. • Palm type gun with thumb trigger control. • Length of Lance: 180mm. • Air Inlet Size: 1/4"BSP. Model No. • Maximum Operating SEA SA913M Pressure: 110psi.

• Die-cast metal body with moulded handle and hanging point. • Palm type gun with thumb trigger control. • Length of Lance: 290mm. • Air Inlet Size: 1/4"BSP. Model No. • Maximum Operating SEA SA913L Pressure: 110psi.

• Die-cast metal body with moulded handle and hanging point. • Maximum Operating Pressure: 110psi.

Model No. SEA SA919

40Amp Plasma Cutter Inverter

Oxyacetylene Gas Welding/Cutting Set

Oxyacetylene Welding & Brazing Kit • Contains welding torch, mixer nozzle and No’s 2, 5 and 10 nozzles.

Welding Bottle Trolley 1 Bottle

• Features digital Amp display and 2 LEDs on the front panel indicating overload and mains power. • Supplied with a 4.6m plasma torch, 2m earth cable, 2m gas hose and regulator. • Ideal for cutting steel, stainless steel, galvanized steel, aluminium, copper and brass. Model No. • Max. Cutting Thickness: 11mm. SEA PP40E • Weight: 9.4kg.

Model No. SEA SGA2

• Complete set of regulators and torches for oxyacetylene gas welding. • Single stage gas regulators with 2 gauges to show bottle pressure and working pressure. • 4.5m Twin gas hose set with check valves (to torch) and EN 730-compliant pressure activated flash arrestors (to regulators). • Cutting torch attachment with Model No. 3 ANMS cutting nozzles. SEA SGA1 • Spark lighter.

4.5m Twin Rubber Oxyacetylene Hose Set

• Lightweight tubular steel frame with large diameter wheels for easy transportation of heavy cylinders. • Accepts cylinders of up to Ø250mm.

Oxygen Regulator

• Twin hose fitted with check valves and 3/8"BSP swivel unions.

Model No. SEA SGA5

Model No. SEA ST28S

110/230V Generators • Twin gauge regulator to BS EN ISO 2503 with bull nose adaptor and 3/8"BSP hose union. • Displays bottle pressure and working pressure for oxygen.

Model No. SEA SGA3 Gas Welding Goggles

• Shade 5 welding lens with indirect ventilation in goggle frame. • Suitable for gas welding. • Conforms to BS EN 175 & BS EN 169.

Model No. SEA SSP5

• Heavy-duty industrial frame design provides full protection and aids portability. • Suitable for running power tools and lighting units etc. • Fitted with automatic voltage control which protects the unit, provides higher efficiency and a long running time of up to 10 hours on a full tank. • Fitted with 12V battery charging outlet, 230V and 110V sockets. • Powerful and reliable generator fitted with maintenance-free brushless alternator. • Smooth running unit fitted with anti-vibration mountings. • Low oil cut-out feature and fuel gauge.

Max. Power Rating

Motor Power

SEA GG2800

2800W

6.5hp

SEA GG7500

6000W

13hp

Model No.

Stud Welding Kit

Safety Spectacles Clear Lens

• Wraparound, clear polycarbonate lenses with tight fitting nylon arms to prevent glasses from slipping. • Conforms to CE standards BS EN 166/F.

Adjustable Arm Safety Spectacles

• Supply: 230V-13A (13A Plug fitted). • Professional quality stud welder for fast, efficient body repairs. • Removes dents quickly, without holes or the need to remove interior trim. • No burn through means that removal of studs and washers is easy and preparation work before repainting is minimised. • Suitable for use on steel or aluminium and can weld studs, washers and tabs. • Patented quick puller attachment allows Model No. removal of smaller dents without the need SEA SR2000 for studs or washers.

395mm Snow Shovel

• Lightweight and durable shovel with forged metal shaft and YD handle. • Length: 1360mm. • Head Dimensions: 395 x 310mm. • Ideal for use in adverse weather conditions.

Model No. SEA SS05 900mm General Purpose Shovel with Wooden Handle

• Heavy-duty spark-free shovel with hardwood shaft and YD handle. • Large 365 x 470mm composite head ideal for use with snow, wood chips, compost, grain and debris.

Model No. SEA SS02 Alloy Wheel Repair Kit • Permanently repairs curb damage, scratches, slight dents and sanding marks on alloy, composite and steel rims as well as hubcaps. • Kit includes everything required to repair damage simply and quickly.

Model No. SEA SCS903

Model No. SEA SSP65

• BS EN 166/F - Wraparound, clear, anti-scratch, polycarbonate lens. • Adjustable length nylon arms for a snug fit.

545mm Snow Shovel

Model No. SEA SSP44

900mm General Purpose Shovel with Metal Handle

• Lightweight and durable shovel with forged metal shaft and YD handle. • Length: 1440mm. • Head Dimensions: 545 x 380mm. • Ideal for use in adverse weather conditions.

• Heavy-duty spark-free shovel with forged metal shaft and YD handle. • Large 365 x 470mm composite head ideal for use with snow, wood chips, compost, grain and debris.

Model No. SEA SS06

Model No. SEA SS01 340g Pure Yarn Cotton Mop

710mm Shovel with Wooden Handle

• Tough, pressed carbon steel shovel head. • Hardwood ash handle. • Manufactured to BS 3388.

• Highly absorbent, 100% pure yarn cotton head. • Features straight grained wooden handle with Model No. galvanized steel socket. SEA BM05 • Head Weight: 340g.

Model No. SEA SH710 Before

Brassed Steel Wire Brush

After • Brassed steel filaments. • Curved, folded, alloy stock with composite handle.

Model No. SEA WB05/R

Vehicle Traction Tracks Pair

800mm Vehicle Traction Track

590mm Folding Shovel

• Manufactured from heavy-duty composite material with metal hinges for grip on uneven surfaces. • Honeycomb cleats provide maximum grip in hard to get out of places. • Size (L x W): 600 x 180mm. Model No. • Sold in pairs that fold away SEA VTR01 for easy storage.

• Flexible PVC design allows track to sit smooth against uneven surfaces. • Fitted with galvanized steel cable and deep ribbed slatted cleats providing maximum grip. • Each track can support a maximum safe working load of 3.5tonne. • Supplied as singles in Model No. canvas storage pouch. SEA VTR02 • Size (L x W): 800 x 220mm.

• Manufactured with a strong nylon handle and solid carbon steel head, powder coated for resistance to corrosion. • Ideal for use in adverse weather conditions. • Lightweight and durable design featuring twist-and-tighten locking system for easy assembly. Model No. • Supplied in pouch for SEA SS03 easy storage.

130L Grit & Salt Storage Box

110L Grit & Salt Storage Box

• Manufactured from hard-wearing polyethylene. • Ideal for indoor and outdoor storage of grit, sand and salt. • Angled lid forces water to run off, keeping contents dry. Model No. • Dimensions (W x D x H): SEA GB01 650 x 500 x 570mm.

• • • •

Manufactured from hard-wearing polyethylene. Ideal for indoor and outdoor storage of grit, sand and salt. Angled lid forces water to run off, keeping contents dry. Compatible with most pallet trucks. Model No. • Dimensions (W x D x H): SEA GB02 850 x 500 x 750mm.

75L Grit/Salt Mobile Storage Cart

16L Backpack Sprayer

• Manufactured from hard-wearing chemical and weather resistant polyethylene. • Features a 75L capacity storage tank ideal for a variety of materials including grit, salt, sand, logs and oil absorbents. • Fitted with composite wheels and ergonomic handle for easy manoeuvrability. • Large lid opening clips securely open to provide easy access. • Angled lid forces water to run off, keeping contents dry.

• Designed for extensive use around the garden, greenhouse and vegetable plots. • Suitable for use with most garden chemicals including pesticides, herbicides and solvent-free preservatives. • Manufactured from heavy-duty polypropylene. • Supplied with four interchangeable spray nozzles and lockable trigger designed for extended use.

Model No. SEA GB04

13L Galvanized Mop Bucket

200L Grit & Salt Storage Box

• • • • •

Manufactured from hard-wearing polyethylene. Ideal for indoor and outdoor storage of grit, sand and salt. Angled lid forces water to run off, keeping contents dry. Features large opening for easy access. Compatible with most pallet trucks. Model No. • Dimensions (W x D x H): SEA GB03 1005 x 590 x 855mm.

Model No. SEA SS4

500ml Oil Suction Syringe Composite Body

1L Multipurpose Mini Pump

• Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home. • Suitable for all engine oils, transmission fluids, brake fluids and general purpose cleaners.

• Manufactured from heavy-duty galvanized steel with a 13L capacity. • Fitted with mop head wringer and carry handle. Model No. • Ideal for domestic and SEA BM08 industrial applications.

• Single action composite bodied suction tube with T-bar type plunger. • Ideal for use on vehicles and machinery for removing oil from gearboxes and differentials. • Supplied with 300mm Model No. transparent flexible suction SEA AK47 hose with 10mm bore.

Model No. SEA TP6804

Locking Pocket Knife with Quick Change Blade

2pc 15 Function Multi-Tool & Twin Blade Knife Set

• Spring loaded multi-switch releases blade holder from handle when folded and operates quick change mechanism for easy blade removal/fitting - no tools required. • Closed/Open Length: 110/175mm. • Supplied with six Model No. reversible high carbon SEA PK23 steel blades.

15 Function Multi-Tool

• Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, hook remover, ruler, wood saw and single/double file. Model No. • Open/Closed Length: 160mm/105mm. SEA PK28

• Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, hook remover, ruler, wood saw and single/double file. • Multi-Tool Lengths (Open/Closed): 160/105mm. Model No. • Twin Blade Knife Lengths SEA PK27 (Open/Closed): 180/110mm.

90pc Stainless Steel Hose Clip Assortment Ø10-57mm

85pc Zinc Plated Hose Clip Assortment Ø8-57mm

• Multi-tool functions include pliers, wire cutters, scissors, wood saw, leather punch, bottle opener, file with hook remover, can opener, Model No. fine edge blade, slotted SEA PK36 and Phillips screwdrivers.

19mm x 20m PVC Insulating Tape Mixed Colours - Pack of 10

• • • •

RoHS Compliant insulating tape. Thickness: 0.15mm. Elongation: 125%. Tensile Strength: 22N/100mm. • Temperature Rating: -18°C to 150°C. • Self extinguishing.

Model No. SEA ITMIX10

Rotary Oil Drum Pump

• Manufactured with SS301A to DIN3017. • Contents (Approximate Quantity): Band Width 9mm; Ø10-16(M00), Ø12-22(0), Ø13-19(00), Ø16-27mm(0X) (10 of each), Band Width 12mm; Ø22-32(1), Ø25-38(1X), Ø32-44(245), Ø35-51(2A), Ø38-57mm(2) Model No. (10 of each).

• Band Size 9mm: Ø8-14(000), Ø10-16(M00), Ø13-19(00) x 10 of each. • Band Size 12mm: Ø16-22(0), Ø16-25(0X), Ø22-32mm(1) x 10 of each, Ø25-38(1X), Ø30-40(1XB), Ø32-44(245), Ø35-51(2A), Ø38-57mm(2) x 5 of each. Model No. • Manufactured to DIN 3017.

SEA SHCS3

SEA SHCSS90AC

19mm x 20m Black PVC Insulating Tape - Pack of 10

19mm x 20m Red PVC Insulating Tape - Pack of 10

• • • •

RoHS Compliant insulating tape. Thickness: 0.15mm. Elongation: 125%. Tensile Strength: 22N/100mm. • Temperature Rating: -18°C to 150°C. • Self extinguishing.

Model No. SEA ITBLK10

Cable Tie Assortment - Pack of 375

• Cast steel body, suitable for oils, antifreeze, degreasants and other non-corrosive fluids. • Supplied with 2"BSP adaptor and is suitable for use on 205L drums. • Delivers approximately 0.3L/revolution.

RoHS Compliant insulating tape. Thickness: 0.15mm. Elongation: 125%. Tensile Strength: 22N/100mm. • Temperature Rating: -18°C to 150°C. • Self extinguishing.

Model No. SEA ITRED10

5m Repair Tapes

• • • • •

Model No. SEA TP54

• Pack of approximately 375 cable ties. • Five colours of each size. • Sizes: 100 x 2.5, 150 x 3.6, 200 x 4.8mm.

Model No. SEA CT375

Self-fusing silicone. Non-adhesive. Flexible between -50°C to +260°C. Neaten up lines and extension cords in stowage. Wrap hydraulic fittings and other exposed metal connections to help prevent corrosion. • Works even over wet, dirty, or oily surfaces. • Wrap it around anything that you want to secure, Colour and it will never leave Model No. any sticky residue. Clear SEA ST5C • RoHS Compliant. • Not to be used with Red SEA ST5R Petrol, Diesel or Black SEA ST5B Brake Fluid.

Interchangeable Remote Action Hose Clamp Pliers

Remote Action Button Clip Pliers

Remote Action Hose Clip Tool

• Flexible cable and compact head help operation in confined spaces. • One cable for standard hose clamp 670mm long and 3-52mm opening. • One cable for Clic-R® Type clamp 635m long and 0-24mm opening. • One cable for dual-sided clamp for spring type and truck hose clamp, 670mm long and Model No. 0-75mm opening.

• Long reach tool designed for awkwardly positioned button clips found on fuel circuits, power steering, brake fluid, air conditioning and gear boxes. • Flexible cable and compact head help operation in confined spaces. • Length: 650mm.

• Long reach tool designed for awkwardly positioned tag-type hose clips. • Flexible cable and compact head help operation in confined spaces. • Features ratchet action and vinyl dipped handles for comfort and close control.

Heavy-Duty Remote Action Hose Clip Tool

Ear-Type CVJ Boot/Hose Clip Pliers

2pc Hose Clip Pliers Set

• Reinforced long reach tool designed to get to awkwardly positioned tag type hose clips. • Flexible cable and compact head help operation in confined spaces. • Features ratchet action for close control. • Flexible Shaft Length: 500mm.

• Formed steel arms with insulated vinyl handles. • Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. • Also used for securing CVJ boot clips.

• Heavy-duty construction with PVC dipped handles for added comfort and grip. • Special ‘V’ slot and cross-slot jaws for installation and removal of tag and wire type hose clips. • Pliers with ratchet locking mechanism for ease of use on lower radiator hoses. • Swivel jaws allow use where access is confined. • Length: 220mm.

Hose Clip Pliers

Camshaft Positioning Tool

2pc Valve Grinder Set

• Suitable for removal of tag and wire type hose clips. • Features ratchet locking mechanism for easy use on lower radiator hoses. • Swivel jaws allow use where access is confined. Model No. • PVC dipped handles for SEA VS166 improved grip and comfort.

• Adjustable legs allow insertion of pegs into holes in camshaft pulleys. • Suitable for coarse and fine positioning of camshaft for timing on a variety of vehicles including Ford Zeta and Model No. Zetec engines.

• Set of two valve grinders with wooden shafts. • Suitable for grinding most engine valves. • Features four sizes of rubber suction cup.

Combustion Leak Detector

250ml Combustion Leak Detector Fluid

SEA VS1675

Model No. SEA VS551

Model No. SEA VS1663

Model No. SEA VS1653

SEA VS173

Deburring/Chamfer Tools

Model No. SEA DB03

• Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. • Checks for CO2 in cooling system and indicates its presence by test fluid colour change. • Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, Model No. VS0011, VS0033 and VS006.

SEA VS0061

• Detector fluid refill for VS0061 & VS0062.

• Manufactured to remove Model No. damaged metal and burrs. SEA DB04 • Features a 1/4" hex shank for use with a drill or hex driver. • Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more.

Model No. SEA VS0061F

Model No.

Size

Type

SEA DB03

3-18mm

Internal

SEA DB04

3-19mm

External

10pc Diesel Injector Seat Cleaner Set

DSG Clutch Servicing Kit

5pc 1/2"Sq Drive Auxiliary Belt Tensioner Tool Set

• Set of seven diesel injector seat cleaners, ream, centring pilot and T-handle. • Used to clean/decarbonize injector seats when changing injectors. • Helps to avoid blow-back due Model No. to poorly seated injectors.

• Suitable for use on VAG 6/7 speed gearboxes. • Applications: Audi A3 (04-19), VW Golf (04-19), VW Touareg (04-19). • OEM Tool(s): T10323, T10373, T10374, T10376, T10407. • Kit includes clutch support Model No. device, puller, gauge block, SEA VS0122 thrust piece and assembly lever.

• Designed to provide a safe and controlled method of adjusting the belt tensioner when removing/refitting the auxiliary belt. • Contains a selection of adaptors and an extension bar to provide easy access to the tensioner. • Suitable for a wide range of diesel Model No. engines found in Ford, Peugeot, SEA VS5188 Toyota and Volvo vehicles.

Steering Rack Knuckle Tool

Stretch Belt Installation Tool - Ford/Volvo

Brake Pipe Bender

• Suitable for the fast and easy removal of the steering knuckle. • Fits racks with hex drive, two flats and round ends. • Ideal for vehicles with limited access and avoids the need to remove the rack assembly. • Suitable for steering rack Model No. knuckles with a diameter SEA VS4000 of 33 to 41mm.

• Designed for use where universal tools won’t work due to the wider crankshaft pulley which restricts access. • Time saving tool, simple to use. One part of the kit clips over the crankshaft pulley to guide the belt, the other part fits over the water pump pulley and with a 17mm socket it’s simply rotated until the belt Model No. is located correctly on all SEA VS790 the pulleys.

• Compact design for bending automotive brake pipes without crushing the pipe walls. • Rigid construction makes it suitable for steel pipes. • Will bend Ø3mm(1/8"), Ø4.75mm(3/16") and Ø6mm(1/4") pipe up to 90°. Model No.

SEA VS2055

SEA VS5055

Impact Ball Joint Splitter

Mini/BMW Engine Support Bracket

Ball Joint Splitter

• Two piece impact ball joint splitter, with detachable fork for use with Sealey air hammer guns, Model No’s SA12/S, SA11, GSA12 and GSA11. • Long shaft provides reach and stability Model No. when striking with hammer. SEA AK390 • Suitable for most cars and light vans.

• Designed to provide a safe secure method for supporting the engine if the engine mounting has to be removed for cylinder head work. • Prevents the engine from slipping or dropping unexpectedly. • When installed the vehicle can be moved to another location without the need to use a lifting device. • Suitable for N12, N14, N16 Model No. and N18 Engines fitted in BMW Mini models. SEA VS5214

• Forged steel body with steel thrust bolt. • Suitable for most small cars and light vans.

35 Blade Feeler Gauge - Dual Marked

• • • •

Imperial graduated 35 blade feeler gauge. Sizes: 0.0015" to 0.035". Dual marked in Imperial and Metric. Blade dimensions 75 x 13mm.

Model No. SEA VS512

Model No. SEA AK380

5pc Oxygen Sensor & Thread Chaser Set

Vanos Unit Socket 22mm 16pt 1/2"Sq Drive BMW, Mini & Ford

• Suitable for oxygen sensors found on most modern vehicles. • Cut-out and slots enable sockets to be fitted over wiring harness. • Includes two chasers for Model No. cleaning and repairing SEA SX0320 damaged threads.

• Vanos unit socket for BMW, Mini and Ford. • 22mm 16pt Socket. • 1/2"Sq Drive. Model

No. SEA VSE6134

Lead-Free Soldering Wire Dispenser Tube

150m Steering Wheel Protection Film

• Tube of flux cored lead-free wire for general purpose soldering.

• Steering wheel protection film. • 150m x 125mm Film.

Model No. SEA SW20

Model No. SEA SWPH150 Thread Inserts

• • • •

Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Includes drill bit, thread tap, insert installation and lug breaking tool. • Supplied with three different lengths of thread insert.

100pc Automotive MINI Blade Fuse Assortment

• Contents (Approximate Quantity): 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A (10 of each).

Model No. SEA TRM6

Size

SEA TRM6R

M6 x 1mm

SEA TRM8R

M8 x 1.25mm

• Contents (Approximate Quantity): 3A, 5A, 7.5A, 15A, 20A, 30A (15 of each), 10A (x30).

250mm Water Pump Pliers

Chrome Vanadium steel. Drop-forged, heat treated. Groove joint, adjustable head. Length: 250mm.

Model No.

Model No. SEA AK368

Model No. SEA BCF120

Steering Wheel Level

• Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. • Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70. • Self-retaining and centring using a spring loaded mechanism. • Features a level bubble to show horizontal position. • Suitable for steering wheels with an internal diameter of between Model No. 270mm and 340mm.

SEA GA460

10pc Pipe Flaring & Cutting Kit

120pc Automotive Standard Blade Fuse Assortment

Model No. SEA BCF100

• 150m x 125mm Film. • Comfort grip handle for easy and fast application.

Model No. SEA SWPF150

M6 x 1mm Thread Repair Kit

• • • •

150m Steering Wheel Protection Film with Applicator Handle

• Tubing kit suitable for cutting and flaring copper, brass or thin walled aluminium pipe. • Includes screw-type tube cutter with die-cast frame and integral de-burring tool. Model No. • Dies: 3/16", 1/4", 5/16", 3/8", SEA AK506 7/16", 1/2", 5/8".

419pc Rubber O-Ring Assortment - Metric

• Contents: (Approximate Quantity) ID x Thickness; Ø18 x 3.5, 20 x 3.5, 22 x 3.5, 23.5 x 3.5, 25 x 3.5, 26.5 x 3.5, 28 x 3.5, 30 x 3.5, 31 x 3.5, 33 x 3.5, 34.5 x 3.5, 36 x 3.5, 38 x 3.5, 41 x 3.5, 44 x 3.5, 47 x 3.5, 50 x 3.5mm (10 of each), 11 x 2.5, 14 x 2.5, 19 x 2.5, 22 x 2.5mm (13 of each), 10 x 2.5, 13 x 2.5, 16 x 2.5, 18 x 2.5, 21 x 2.5mm (14 of each), Model No. 5 x 2mm (x18), 3 x 1.5, 4.4 x 2mm (20 of each), SEA BOR419 7 x 1.5, 10 x 1.5, 13 x 1.5 (23 of each).

Cable Tie Fastening Tool

• Used for tightening cable ties up to 2.5mm thick and up to 9.5mm wide. Model No. • Spring loaded handle and spring loaded cutter. SEA AK3254

190mm Wire Rope/Spring Cutter

• High carbon steel blades, hardened, tempered and polished. • Cuts up to Ø5mm wire rope and Ø1.5mm spring wire. • Spring loaded handles with vinyl grip and safety lock.

Model No. SEA AK503

AC/DC Clamp Meter & Multimeter

CAT IV 1000V High Voltage Tester Hybrid Vehicles

• Professional two pole voltage tester CAT IV 1000V for checking high voltage on electric/hybrid vehicles. • Suitable for checking AC mains and DC power supplies between 6-1000V DC and 24-1000V AC. • Can also be used for checking voltage and polarity on car batteries and continuity testing of DC circuits. • Includes a self-test function and illumination light. • EN61243-3, IP65, CE certified. • Requires 2 x AAA 1.5V batteries (not supplied).

Model No. SEA PPHY

• Designed for the automotive electrician and conforms to EN61010 CAT III 600V. • Ideal for measuring current draw from vehicle components in situ. • Features 10mm clamp. • Supplied in pouch.

Digital Automotive Analyser/Insulation Tester - Hybrid Vehicles

8 Function Digital Multimeter with Thermocouple

• Can be used as a stand-alone device or linked wirelessly with a USB interface to a PC or laptop enabling results to be graphed, saved or printed. • Supplied with high voltage probes, thermocouple and wireless USB cable. • The unit also has the usual functions expected on a high quality multimeter including Model No. true RMS (Root-Mean-Square) SEA TA320 and IP67 waterproof rating.

• Heavy-duty general purpose multimeter with clear and easy-to-read LCD display. • Features data-hold function, temperature probe and diode test facility. • Housed in rugged rubber boot with integral stand. • Supplied with full set of leads and probes. • Measures: AC and DC Voltage, DC Current, Resistance, Temperature, Audible Model No. Continuity, Diode/Transistor SEA MM20 Verification Mode.

Diagnostic Socket Memory Safe EOBD

• Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. • Features LED to indicate back-up battery power supply status. • Saves valuable time spent re-programming lost codes.

Model No. SEA TA305

Digital Insulation Tester

• • • •

Specially designed for testing insulation on high voltage cables. Suitable for hybrid and electric vehicles. Supplied with test leads, batteries and carry-case. Conforms to EN61010 CAT III (1000V).

Model No. SEA TA319 In-Line Ignition/HT Spark Tester

• Tests HT supply to spark plug. • Quick and simple fault diagnosis.

Model No. SEA VS2072

Model No. SEA VS526

6pc GripMAX® Screwdriver Set VDE Approved

7pc Screwdriver Set VDE Approved

• Chrome Molybdenum shafts with magnetic tip and corrosion resistant precision blade. • Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. • Specially designed impact resistant handle with non-slip comfort grip and hanging hole. • Contents: Slotted; 3 x 100, 5.5 x 125, 6.5 x 150mm, Phillips; #0 x 75, #1 x 100, #2 x 100mm.

• Chrome Vanadium shafts with magnetic and corrosion resistant precision tips. • Insulated and VDE approved for use up to 1000V AC and 1500V DC. • Impact resistant handles with contoured, comfort grip for added torque transfer. • Contents: Slotted; 3 x 75, 4 x 100, 5.5 x 125, 6.5 x 150mm, Phillips; #0 x 75, #1 x 80, Model No. #2 x 100mm.

Model No. SEA AK6122

8pc Screwdriver Set VDE Approved

SEA S0756

• Chrome Vanadium shafts with magnetic and corrosion resistant tips. • Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. • Contents: Slotted; 3.5 x 100, 4 x 100, 5.5 x 125mm, 6.5 x 150mm, Phillips; #1 x 80, Model No. #2 x 100, Pozi; #1 x 80mm, #2 x 100mm. SEA AK6124

9pc Extra-Long VDE TRX-Star* Key Set

6pc Extra-Long Hex Key Set

7pc Screwdriver Set VDE Approved

• Manufactured from heat treated and hardened S2 steel with a chemically blackened finish for resistance to corrosion. • Keys range in length from 135mm to 215mm and in size from T10 to T50. • Fitted with PP/TPR handles, keys are fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Contents: T10, T15, T20, T25, T27, T30, T40, T45, T50. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). • Also suitable for electricians Model No. and carpenters (1000V AC SEA AK7178 safe live working).

• Manufactured from heat treated and hardened S2 steel with a chemically blackened finish for resistance to corrosion. • Keys range in length from 135mm to 215mm and in size from 2.5mm to 8mm. • Fitted with PP/TPR handles, fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Contents: 2.5, 3, 4, 5, 6, 8mm. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). • Also suitable for electricians Model No. and carpenters (1000V AC SEA AK7177 safe live working).

• Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. • Contents: Slotted; 3 x 75, 4 x 100, 5.5 x 125mm, Model No. 6.5 x 150mm, Phillips; #0 x 75, SEA AK6125 #1 x 80, #3 x 100mm.

16pc 3/8"Sq Drive Insulated Socket Set VDE Approved

20pc 1/2"Sq Drive Insulated Socket Set VDE Approved

• Hardened and tempered Chrome Vanadium steel sockets and accessories. • Chrome plated for resistance to corrosion. • Each component is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). • Also suitable for electricians Model No. and carpenters (1000V AC safe live working). SEA AK7940

3pc VDE Approved Pliers Set

• • • •

VDE Approved. Induction-hardened cutting edges. Soft grip handles for comfort and control. Cutting Capacities: Ø1.8, Ø2 & Ø2.3mm.

Model No. SEA AK83452

9pc 3/8"Sq Drive Insulated Socket Set VDE Approved

7pc Insulated Open End Spanner Set VDE Approved

• Each component is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Contents: Sockets; 8, 10, 12, 13, 14, 17, 19mm, Flip Reverse Comfort Grip Ratchet Wrench with Push-Button Quick Release, 100mm Extension Bar. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). • Also suitable for electricians and carpenters (1000V AC safe live working).

• Manufactured from hardened and tempered Chrome Vanadium steel. • Each spanner is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC. • Sizes: 8, 10, 12, 13, 14, 17, 19mm. • Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). • Also suitable for electricians and carpenters (1000V AC safe live working).

Hybrid/Electric Vehicle Keyring Warning Tag

Model No. SEA AK7942

200 x 300mm High Voltage Warning Sign

• Safety warning tag for placing with hybrid or electric vehicle keys whilst service or repair operations are being carried out. • It is essential that the vehicle keys are kept secure and away from the vehicle during service or repair work. • 80 x 110mm 400gsm paper with gloss finish.

Model No. SEA HYBRIDTAG

• Electrical hazard warning sign, suitable for use on an exclusion zone around a hybrid or electric vehicle during repair or service operations. • Rigid 3mm thick plastic warning sign.

Model No. SEA HVSA4

Exclusion Zone Extension Kit

Exclusion Zone Kit

• • • • • •

Package includes: HSC25M - Safety Chain Red/White 25m x 6mm RCC10 - Plastic Chain Connector Pack of 10 RSH10 - Plastic Chain S-Hook Pack of 10 RWPB01 - Red/White Post with Base (x2) Ideal for technicians Model No. working on modern hybrid and electrical vehicles. SEA HP55KECOMBO

1kV Electrician’s Safety Gloves

• High voltage electrician’s gloves suitable for use on hybrid and electric vehicles. • Grade 0 gloves suitable for working on systems up to 1kV AC in accordance with EN 60903.

Model No. SEA HVG1000VL

Model No. SEA AK63171

Hybrid/Electric Vehicle Warning Sign

• Essential safety warning sign for placing on a hybrid or electric vehicle whilst service or repair operations are being carried out. • A4 300gsm paper with gloss finish. • Includes a box for the technician’s name, to clearly identify who is working on the vehicle.

Model No. SEA HYBRIDSIGN Pneumatic Glove Tester

Package includes: RWSBKIT - Red/White Post & Chain Kit 25m HVSA4 - High Voltage Warning Sign 200 x 300mm HYBRIDSIGN - Hybrid/Electric Vehicle Warning Sign (x2) HYBRIDTAG - Hybrid/Electric Vehicle Keyring Warning Tag Ideal for technicians Model No. working on modern hybrid and electrical vehicles. SEA HP55K1COMBO

• Pneumatic glove tester used to carry out a pressure test on electricians high voltage gloves. • Suitable for use with Model No. HVG1000VL gloves.

Model No. SEA GT117

High Voltage Rescue Pole Electrician’s Insulating Rubber Safety Mat

• High voltage rescue pole suitable for use up to 45kV AC in dry conditions, in accordance with EN 50508. • Supplied with wall mounting brackets and instructions for use. • Suitable for hybrid and electric vehicle applications. • Length: 1.79m.

Model No. SEA HRP45

• Class 2 High voltage insulating rubber floor mat. • Essential item required to protect vehicle technicians from the risk of electric shock when working on electric or hybrid vehicles. • Independently tested and certified as offering safe protection up to 17kV AC in accordance with Model No. BS EN 61111. • Size: 1 x 1m. SEA HVM17K02

FEATURES Simple and safe to use with no long term battery storage issues. All units can be fully energised in a matter of minutes. Innovative technology with no internal battery so no need to wait hours for the unit to charge before use. Lightweight and compact for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents.

HYBRID TECHNOLOGY

Integral lithium battery pack for use when battery voltage is below 5V.

Digital display indicates battery voltage, capacitor charge and faults.

Phone not included.

Ref.

Model No.

Output

Output Start Peak (EN)

SEA E/START800

12V

800A(400A)

SEA E/START1100

12V

1100A(550A)

SEA E/START1600

12V

1600A(800A)

SEA E/START1224

12/24V

1000A(500A) / 1600A(800A)

SEA E/START3012

12V

3000A(1500A)

SEA E/START800HY

12V

800A(400A)

*TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX速 and TORX PLUS速 fasteners respectively. TORX速 and TORX PLUS速 are registered trademarks of Acument Intellectual Properties, LLC.

Promotion Valid Until 31.03.2020