Garage Equipment Catalogue 2018 by InterCars SA

DRIVING HIGHER STANDARDS

EVERYTHING FOR CAR WORKSHOPS NO. 1/2018 MARCH 2018

FREE COPY

CATALOGUE GARAGE EQUIPMENT

INTERCARS.EU

NEW PRODUCTS

Diagnostic kit

Air conditioning unit

Remote truck diagnostic

3D geometry

IC index: TEX AXONE5/SET

IC index: S P00 000 125

IC index: TEX D13621

IC index: 1 692 000 020, 1 692 000 022, 1 692 000 024

p. 6

p. 69

p. 101

Diagnostic tester

Air conditioning unit

TPMS tester

Pads for lifts

IC index: PDL5600

IC index: S P00 000 110, S P00 000 112, S P00 000 113

IC index: HAM-D045

IC index: 01103031, 38.31.829

p. 17

p. 71

p. 24

p. 156,157

Tool trolley

Tool box

Tool trolley

Stand for diagnostics of alternators

IC index: 727849

IC index: 708821

IC index: 795808

IC index: 007935063050

p. 269

p. 275

p. 35

AC flushing device

TPMS tester

AC flushing device

Pneumatic driller

IC index: 007936210770

IC index: TEX D13340

IC index: 007935110700

IC index: HAZ 9030 P-1

p. 79

p. 23

p. 79

p. 173

Wheel balancer

ADAS calibration kit

Stationary high-pressure washer

Compressed air reducer

IC index: UNITROL TROLL MONOLITH

IC index: TEX 3907971

IC index: 107340510

IC index: HAZ 9000-080

p. 129

p. 10

p. 20

p. 192

The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

p. 172

NEW PRODUCTS

Monemeters kit

Motorcycle tire changer

Motorcycle wheel balancer

Swivel ratchet

IC index: 007950024725

IC index: EVERTBP806

IC index: EVERTBP63-2

IC index: 7121102

p. 84

p. 117

p. 126

p. 286

Piston compressors

Screw compressors

Protection gloves

IC index: EVERT420/100K EVERT460/200K

IC index: EVERTG7,5/500/D EVERTG11/500/D EVERTG15/500/D

IC index: EVERTD7,5/500/D/IVR EVERTD11/500/D/IVR EVERTD15/500/D/IVR

IC index: 93-852-L

p. 159

p. 162

p. 376

Service order board

Pneumatic hose

Electricity tester

Spraying costume

IC index: E-9019-00588

IC index: 46574-2

IC index; FAZER 777

IC index: 0RS1006-XXL

p. 400

p. 166

p. 328

p. 376

Metal cutter

400V extension cable

Generator

DOCTOR START rectifier

IC index: 0 601 B28 000

IC index: KG.12.1.3G.52.30.52

IC index: KS7000E3

IC index: 829341

p. 334

p. 328

p. 329

p. 239

Cordless mini grinder

Working shoes

Thermal imaging camera

Set of workshop lamps

IC index: 0 601 9F2 000

IC index: T2180

IC index: 0 601 083 101

IC index: SG49.0142

p. 332

p. 371

p. 338

p. 349

TABLE OF CONTENTS

DIAGNOSTICS AND TESTERS

BRAKE SYSTEM

221

FUEL INJECTION SYSTEMS

HEATING, EXHAUST EXTRACTORS

231

AIR CONDITIONING

BATTERIES SERVICING

237

WHEELS GEOMETRY MEASUREMENT

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

247

DIAGNOSTIC LINES

108

SPECIALISED TOOLS

309

TYRE CURING

113

ELECTRIC TOOLS AND MACHINERY

328

LIFTS AND JACKS

143

WORKSHOP LAMPS / ELECTRICITY

346

COMPRESSORS AND PNEUMATIC EQUIPMENT

159

PAINT AND BODY EQUIPMENT

353

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

175

SAFETY AND HYGIENE AT WORK

369

WASHERS, VACUUM CLEANERS, WASHING STATIONS

183

ACCESSORIES AND OTHER ITEMS

382

OIL TECHNIQUES

197

LUBRICANTS AND CHEMICALS

394

WELDING

210

CUSTOMER SERVICE AND WORKSHOP OPERATION

399

DIAGNOSTICS AND TESTERS

AXONE NEMO

AXONE NEMO (Gorilla Glass 12” display) is a versatile and all-in-one visualisation unit intended for IDC5 software, which provides your workshop with maximum support. The most extensive IDC5 PREMIUM software is equipped with a number of unique features, most of which are related to the concept of internet connectivity and communication. AXONE NEMO is intended exclusively to provide wireless communication – via Bluetooth – with the following TEXA diagnostic interfaces: Navigator TXTs and Navigator NANO S. AXONE NEMO is resistant to the harshest and difficult conditions when vehicles are repaired. It works well with all TEXA software: BIKE, CAR, TRUCK, OHW (AGRI/CONSTRUCTION), MARINE.

NAVIGATOR TXTs

(supporting the following software: BIKE, CAR, TRUCK, OHW, MARINE) IC index

NAVIGATOR NANO S

AXONE NEMO

(supporting the following software: BIKE, CAR)

(without software) IC index

TEX D072A1

IC index

TEX D127X0

TEX D08662

Diagnostic software for AXONE NEMO (IDC5 PREMIUM) CAR

TRUCK IC index

BIKE

TEX P13010

IC index

TEX P13020

OHW (AGRI + CONSTRUCTION)

TEX P13030

IC index

TEX P13090

MARINE IC index

TEX P130C0

TEXA NAVIGATOR TXBe MARINE

NEW

(with the IDC4 BASIC MARINE software) Diagnostic tester for boats and water scooters Option: upgradeable with diagnostic features for: BIKE: motorcycles, motor scooters and quads. IC index

IC index

TEX D11790

NEW

TEXA NAVIGATOR TXBe BIKE

(with the IDC4 PLUS BIKE software) Diagnostic tester for motorcycles, motor scooters, quads. Option: upgradeable with diagnostic features for: MARINE: boats and water scooters. IC index

TEX D11730

Special-offer diagnostic kit: AXONE S CAR + Navigator NANO S + TPS key IDC5 PLUS INFO for PC/laptop

SPECIAL OFFER

This is the latest diagnostic kit for passenger cars and TMPS systems equipped with IDC5a CAR software adjusted to work under the Android system. IC index

TEX Z11012

Option: upgradeable with diagnostic features for LIGHT TRUCK: vans, BIKE: motorcycles, motor scooters and quads The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

DIAGNOSTICS AND TESTERS

NEW

TEXT diagnostic kit AXONE 5 + Navigator NANOs Ideal for everyday use, fast and intuitive IC index

TEX AXONE5/SET

AXONE 5 is a new TEXA display unit for the diagnostics of vehicles from

the CAR and BIKE categories. Its simple and intuitive operation and the latest generation of high-performance components will ensure full professionalism of diagnostic services in your workshop. AXONE 5 offers an excellent price/quality ratio, and a combination of reliability and practical experience which is typical for all TEXA products. This device provides intuitive and complete diagnostics which will satisfy even the most experienced and demanding users, but is also suitable for beginner diagnosticians. The quad-core ARM A9 Cortex® processor with a GPU accelerator provides the unit with impressive computing power and resource efficiency. The latest generation 9.7” capacitive touch-screen with its 2048x1536 resolution provides excellent readability and high-precision touch navigation. Thanks to its powerful batteries, the unit can be used during the whole working day without recharging (standard use for 8 hours). The high-performance Bluetooth and Wi-Fi connectivity provides excellent signal reception and connection stability.

IDC5a PLUS: even more features!

Optionally, the AXONE 5 unit can be extended with diagnostic features for: sports cars (SUPERCAR), motorcycles (BIKE)

The IDC5a PLUS unit is an enhanced version of the IDC5 software developed specifically for AXONE 5 to ensure smooth operation, intuitive usage of resources and maximum operational speed. AXONE 5 is based on Android, which is commonly known for its ease of use. The combination of AXONE 5 and IDC5a PLUS ensures the best diagnostic coverage of commercially available vehicle brands and models for the CAR and BIKE environments. Thanks to the continuous development of TEXA APP’s product range, it provides technicians with access to full support of the repair process and to a comprehensive database of technical data and the most advanced diagnostic features.

TEXA NAVIGATOR TXTs

A new line of diagnostic testers (PC/laptop interface) for passenger cars, vans, trucks, buses, trailers / semitrailers, agricultural and construction machinery.

NAVIGATOR TXTs CAR

Diagnostic tester for passenger cars Option: upgradeable with diagnostic features for: trucks, agricultural machinery, construction machinery, motorboat equipment and motorcycles (equipped with IDC5 CAR LIGHT software) IC index

TEX D07213

NAVIGATOR TXTs TRUCK

SPECIAL OFFER

Diagnostic tester for trucks, buses, trailers / semitrailers (equipped with the IDC5 PLUS TRUCK software) Option: upgradeable with diagnostic features for: passenger cars, agricultural machinery, construction machinery, motorboat equipment and motorcycles IC index

TEX D07223

(equipped with the IDC5 CAR PLUS software) IC index

TEX D07213/PLUS

NAVIGATOR TXTs OHW (AGRI + CONSTRUCTION) Diagnostic tester for agricultural and construction machinery (equipped with the IDC5 PLUS software) Option: upgradeable with diagnostic features for: passenger cars, trucks, motorboat equipment and motorcycles IC index

SPECIAL OFFER

TEX D072C2

(*) Limited special offer. Subject to stock availability.

DIAGNOSTICS AND TESTERS

Navigator NANO S (ver.3) â&#x20AC;&#x201C; new successor of NANODIAG tester Navigator NANO S

SPECIAL OFFER

This is a state-of-the-art diagnostic tester (interface to PC/laptop) for wireless diagnostics of passenger cars and vans (BIKE diagnosis as an option) Apart from its revolutionary dimensions and weight, the Navigator NANO S features the compete IDC5 CAR PLUS diagnostic software which enables: reading and deletion of errors, readout of parameters, activation of modules, EOBD scan tool, codes and adjustments. The IDC5 CAR PLUS software provides you with both diagnostic resources and database with interactive electrical diagrams, detailed system cards and modules, mechanical datasheets and technical bulletins. IC index

TEX D08614

(*) This special offer is subject to stock availability

TEXA GASBOX

TEXA OPABOX

This GASBOX Autopower is an analyser of exhaust gases generated by petrol, LPG and CNG engines. It is equipped with a measuring chamber designed by TEXA and a practical trolley allowing the machine to move freely around the workshop or outside of it. The kit includes an exhaust gas analyser, measuring probe + trolley. Measuring communication + trolley. Autonomous Bluetooth wireless connection. Autonomous battery (no need to charge for up to 8 h). MID certificate. IC index

This OPABOX Autopower partial flow opacimeter for diesel engines is equipped with the latest generation measurement chamber, developed in line with international standards. The kit includes an opacimeter, measuring probe + trolley. Bluetooth wireless connection. Autonomous battery (no need to charge for up to 8 h). MID certificate. IC index

TEX Z00813

Extra equipment for exhaust gas analysis: RC3 speedometer and EOBD scanner

RC2 magnetic speedometer

The RC2 unit is an electronic meter for an engineâ&#x20AC;&#x2122;s rotational speed and temperature. It is equipped with a magnetic housing, so it can be attached to a car hood or longitudinal beams in order to conduct tests with the utmost comfort. It can take measurements using a microphone and a residual battery signal or via an induction clamp and a piezoelectric sensor.

RC3 (Revolution Counter 3) is, in fact, an interface which can collect data using three methods: by means of an inductive terminal and piezoelectric sensor, via a microphone and a residual battery signal or directly from an OBD socket (in vehicles equipped with this protocol). IC index

TEX G01250

TEXA OBD LOG

Mobile EOBD standard reader IC index

TEX Z00951

TEX Z05914

IC index

TEX G05150

USB key

for AXONE 4/ MINI /S/ NEMO to operate pressure sensors in tires IC index

TEX D10940

DIAGNOSTICS AND TESTERS

From professionals for professionals... only at INTER CARS NEMO SPECIAL OFFER !!! State-of-the-art diagnostic kit

AXONE NEMO + Navigator TXTs + any 2 TEXA software in the most extensive PREMIUM version

IC index

TEX AXONENEMO/SET

at the incredibly low price CAR (passenger car) OHW (agricultural machinery and construction vehicles)

CAR (passenger cars) TRUCK (trucks)

Which two software will You choose???

BIKE (motorcycles, quads, snow scooters) MARINE (motorboat equipment)

AXONE NEMO

AXONE Nemo was designed to work in the toughest workshop environments, which is an enormous advantage over a conventional PC. This robust, practical and easy-to-use unit comes with an installed operating system completely resistant to viruses and all compatibility issues which are typical to traditional computers. It is extremely durable (the housing is made of magnesium alloy) with 12-inch high-definition capacitive display equipped with Gorilla-type Glass which provides unprecedented clarity and scratch resistance. It provides a maximal level of work efficiency and convenience at your modern workshop. The size and high resolution of its display, which allows for the comfortable reading of precise diagrams and electrical measurements, is ideally suited to play instructional videos, which more and more assist mechanic staff in the diagnostics. Naturally, it can work in portrait and landscape orientation. Technical data: Intel® Quad Core N3160 Resolution 2160x1440 HD 250 GB RAM 8 GB Windows 10 Enterprise Built-in sensors: gyroscope, altimeter, barometer, accelerometer, compass

(*) Limited special offer. Subject to stock availability.

Diagnostic software available in the special offer: CAR – passenger cars and vans SUPERCAR – sports cars (works only with the CAR software) TRUCK – trucks, vans, trailers and semi-trailers. OHW – agricultural vehicles and construction machinery BIKE – motorcycles, quads, snow scooters MARINE – motorboat equipment Moreover, thanks to the application of practical magnetic modules (an innovation in the world of diagnostic testers), it takes just a few seconds to equip the AXONE Nemo unit with an external expansion module with extra features and resources needed to diagnose and repair any type of vehicle, also in the future (module RH+, DoIp, mini, thermal imaging)..

NAVIGATOR TXTs

Navigator TXTs is the most complete and versatile tool from the NAVIGATOR series that is able to perform diagnostics on all types of vehicles: CAR, TRUCK, AGRI, CONSTRUCTION, BIKE and MARINE. The TXTs unit allows you to perform self-diagnostic tests, which include: readout and deletion of errors, readout of system parameters and activation stages, setting adjustments and configurations, deactivation of service controls and airbags, configuration of control panels, keys and remote pilots..

DIAGNOSTICS AND TESTERS

G-SCAN2 – Asian Specialist G-SCAN Co. is the official supplier of factory diagnostic testers for KIA and HYUNDAI car service centres. For years, the G-SCAN unit has been the most popular diagnostic device in Korea and Japan, and has been gaining increasing recognition in Europe and the USA. In 2017, the G-SCAN2 tester was awarded by ”Professional Tool & Equipment News (PTEN)” – the renowned American automotive magazine. The latest G-SCAN2 tester model covers the same range of serviced vehicles as its predecessor – the Gscan unit, which won the title of the best-selling tester in Japan in 2008-2012 and whose share in the Korean tester market is over 70%. G-SCAN2 ensures diagnostics of Japanese vehicles at the highest level available beyond Vehicle Service Centres. In addition, the G-SCAN2 unit is also supported by leading European brands and selected vehicles from the American market. SPECIFICATION 3 processors: ARM11 (600 MHz) and 2 x AMR9 (266 MHz) Internal memory: Main board 1 : NAND 128 MB + SD 256 MB Main board 2 : NAND 32 MB + SD 8 MB Main board 3 : NAND 32 MB + SD 8 MB External memory: SD 16 GB Operational temperature: 0-50°C Matrix: 7” TFT LCD 1024x600 CAN-BUS High/Low/Single full service Rechargeable battery: Li-ion Polymer 2100 mAh Operating voltage: 7–35 DCV Trucks: 24 V Network: WiFi and Bluetooth Protocols: ISO-1898, ISO-11519, SAE-J2411 ISO-9141, ISO-9141-CARB, KWP2000, SAE-J1850, SAE-J1708, RS232C, Melco Pull-Down UART SELECTED FEATURES: – Key programming and code calculator – Adaptations of gearboxes, EGR valves, throttles, dampers, pilot dosage, windows, car boot flaps – Crash Data deleting – Regeneration and resetting of DPF settings – Pump initialisation, injectors compensation

– Coding of injectors – Tests on engine, injection and pressure uniformity – Support of air suspensions and the electric parking brake

Exclusively at INTER CARS

G-SCAN2 tester + reinforced protective case IC index

G-SCAN2 OBD/SET

The set contains: G-SCAN2 unit with an OBD cable SD memory card + card reader PC Utility application protective case

G-SCAN2 tester

- in its standard version, it is equipped with an EOBD diagnostic cable, an SD memory card + a card reader and PC software (PC Utility). The price of the unit includes an annual software upgrade subscription. Moreover, the unit can be additionally equipped with an AZJA (ASIA) cable set and the latest VMI2 measuring module.

VM12 Diagnostics module

– this is a 4-channel oscilloscope + multimeter + simulator. All the features are integrated with the tester in one casing. Right away and at hand. 2- or 4-channel operational mode. Measurements of voltage, resistance, current, frequency levels, etc. Signal simulations. IC index

G-SCAN VMI2

AZJA (ASIA) cable kit

HONDA/ACCURA 3P, MAZDA 17P, MITSUBISHI 12P+16P, NISSAN 14P, SUBARU 9P, TOYOTA 17P R, TOYOTA 17+1PIN, Kia 20P-A, Kia 20P-B, Daewoo 12P, Ssangyong 14P, Ssangyong 20P, Hyundai and Kia for key coding. IC index

G-SCAN ASIA KIT

DIAGNOSTICS AND TESTERS

TEXA eTRUCK Remote truck diagnostics

NEW

The eTRUCK unit is an innovative solution which will bring your truck workshop into a new dimension of repairs. Once installed in the vehicle’s diagnostic socket (EOBD) and after short configuration, this miniature device offers a completely new type of service. Thanks to the eTRUCK unit, at your workshop you will be able to remotely and continuously monitor the vehicle’s technical conditions, conduct periodical maintenance management and control functions restoring its optimum conditions of use – this solution is an absolute novelty. The eTRUCK device is a connecting element between the mechanic and the truck. It strengthens the customers’ loyalty to the workshop which provides them with continuous assistance. This is also an ideal solution for fleet drivers and fleet managers, ensuring continuous data on the condition of vehicles and enabling them to take measures to reduce costs and optimise vehicle use through the application and its dedicated management portal.

IC index

TEX D13621*

(*) Every workshop with the e-TRUCK system must have an active subscription, which - depending on the number of owned e-TRUCKs In order to operate the e-TRUCK system, it is necessary to have a Texa tester in your TRUCK environment.

Diagnostic software AXONE 4/NEMO – additional diagnostic software (IDC5 PREMIUM) CAR

TRUCK IC index

TEX P13010

BIKE IC index

TEX P13020

OHW (AGRI + CONSTRUCTION)

IC index

TEX P13030

IC index

TEX P13090

IC index

TEX P13230

IC index

TEX AGU058

IC index

TEX P1293B

MARINE IC index

TEX P130C0

AXONE 4 MINI – additional diagnostic software (IDC PM)

CAR

AXONE S – additional diagnostic software (IDCa)

CAR

BIKE IC index

TEX P13210 LIGHT TRUCK

(BASIC version)

(vans) IC index

TEX AGP13111

NAVIGATOR TXTs – additional diagnostic software (IDC 5) CAR

TRUCK

BIKE

LIGHT version IC index

IC index

TEX P12919

PLUS version IC index

migration of CAR to PLUS

TEX P1291B

IC index

OHW (AGRI + CONSTRUCTION)

TEX AGP12913

MARINE IC index

Navigator TXBs/TXBe – additional diagnostic software (IDC5) 10

TEX P12926

TEX P129C3

IC index

BIKE

TEX P12995

migration of MARINE to PLUS IC index

TEX AGP12991

MARINE IC index

TEX P12936

IC index

TEX P12990

DIAGNOSTICS AND TESTERS

Connection cables TRUCK connection cables – for trucks, buses, trailers and semitrailers Cable kit for TRUCK (standard)

Cable kit for BUSES

Diagnostic cable – 3 PIN IVECO Diagnostic cable – 30 PIN IVECO Diagnostic cable – 38 PIN IVECO Diagnostic cable – RENAULT Truck Universal diagnostic cable with adapters Diagnostic cable – 16 PIN SCANIA Diagnostic cable – MERCEDES BENZ Diagnostic cable – DAF Diagnostic cable – 8 PIN VOLVO Diagnostic cable – 4+8 PIN MAN Diagnostic cable – 9 PIN DEUTSCH-JOHN DEER, CNH GROUP, LANDINI, MCCORMICK TRUCK Diagnostic cable – ZF TRUCK IC index

Diagnostic cable – 37 PIN MAN Diagnostic cable – VAN HOOL, SOLARIS, BREDAMENARINI, VDL Diagnostic cable – VOITH Diagnostic cable – 9 PIN DEUTZ Diagnostic cable – KAMAZ, SOLARIS, TEMSA Diagnostic cable – BOSCH REXROTH Diagnostic cable – TRUCK-BUS ZF 2nd generation Diagnostic cable -– TRUCK WABCO ABS D/E Diagnostic cable – VOITH gearbox DIWA5 Diagnostic cable – A/C WABCO ATC TEMSA IC index

TEX S04929

IC index

TEX S04926

NOTE: In order to connect cables dedicated for a given car-make, a main cable and power supply lines (lighter/battery) are required.

Cable kit for TRAILER / SEMITRAILERS Diagnostic cable – WABCO-KNORR Diagnostic cable – 4 PIN HALDEX EB+ Diagnostic cable – 4 Haldex Modular Truck (3900334) Diagnostic adapter – TRUCK ISO 7638 ABS/EBS

ACCESSORIES

Main cable and power supply lines (for Navigator TXTs) IC index

TEX 3905031

TEX 3903942

Cable kit for VANS (for Navigator NANO S, Navigator TXTs, Nanodiag) Diagnostic cable – IVECO 38 pin Diagnostic cable – MERCEDES BENZ 14 pin CAR-TRUCK adapter-converter IC index

TEX 3904795

CONSTRUCTION connection cables – for working machines Diagnostic cable – IVECO 30 PIN Universal diagnostic cable Diagnostic cable – MB Diagnostic cable – Volvo Truck Diagnostic cable – MAN 37 PIN Diagnostic cable – BUS ZF Diagnostic cable – BUS VOITH Diagnostic cable – DEUTZ Diagnostic cable – BOSCH REXROTH Diagnostic cable – DEUTSCH 9 PIN Diagnostic cable – VOLVO Conp. Diagnostic cable – CUMMINS Diagnostic cable – HITACHI Diagnostic cable – KUBOTA Diagnostic cable – BOBCAT Diagnostic cable – SCANIA ENGINE IC index

Required main cable and power supply lines – TEX 3905031 for Navigator TXTs

TEX S049C3

INDUSTRIAL ENGINE connection cables – for stationary engines Diagnostic cable – IVECO 30 PIN Universal diagnostic cable Diagnostic cable – DEUTZ Diagnostic cable – DANFOS, SISU S 9 PIN Diagnostic cable – DEUTSCH 9 PIN Diagnostic cable – CUMMINS Diagnostic cable – KUBOTA Adapter – FTP/IVECO IC index

Required main cable and power supply lines – TEX 3905031 for Navigator TXTs

TEX S049C4 The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

DIAGNOSTICS AND TESTERS

Connection cables Connection cables AGRI – for agricultural machinery Cable kit for AGRI

ACCESSORIES

Self-diagnosis diagnostic cable – SAME DEUTZ-CLAAS Self-diagnosis diagnostic cable – FENDT Diagnostic cable – NEW HOLLAND Self-diagnosis diagnostic cable – CNH GROUP Self-diagnosis diagnostic cable SISU, SAUER DANFOSS to CARRARO TRANSMISSION Self-diagnosis diagnostic cable – MASSEY FERGUSON Self-diagnosis diagnostic cable – VALTRA Self-diagnosis diagnostic cable – DEUTZ Self-diagnosis diagnostic cable – CATERPILLAR / PERKINS Diagnostic cable – 30 PIN IVECO Diagnostic cable – NEW HOLLAND TN SERIES Diagnostic cable CLASS/RENAULT Diagnostic cable – BOSCH REXROTH Diagnostic cable – VALTRA 2nd generation Diagnostic cable – LANDINI, McCORMICK Universal diagnostic cable (pin-out kit) Diagnostic cable – CARRARO LIFTER (MF, JD&CLASS) Diagnostic cable – KUBOTA ENGINE IC index

TEX S04974

NOTE: In order to connect cables dedicated for a given car-make, a main cable and power supply lines (lighter/ battery) are required.

Main cable and power supply lines (for Navigator TXTs) IC index

TEX 3905031

Connecting cables – BIKE, MARINE – for motorcycles, quads, water and snow scooters Cable kit for BIKE ASIA Cable kit for BIKE EUROPE Diagnostic cable – HONDA Diagnostic cable – KAWASAKI 2003> * Diagnostic cable – SUZUKI 2003> * Diagnostic cable – HONDA 2004> * Diagnostic cable – KAWASAKI 2007> Diagnostic cable – KAWASAKI Racing Bike Power Diagnostic cable – CAN net KAWASAKI Diagnostic cable – Generic KAWASAKI 2010> Diagnostic cable – YAMAHA/MALAGUTI Diagnostic cable – POLARIS Diagnostic cable – KYMCO IC index

TEX S04937

IC index

TEX S04938

Cable kit for MARINE

Cable kit for BIKE USA

Diagnostic cable – TRIUMPH /VICTORY/OBD Diagnostic cable – HARLEY DAVIDSON Marelli 2000> Diagnostic cable – HARLEY DAVIDSON 2000> Diagnostic cable – BUELL Diagnostic cable – HARLEY DAVIDSON 2012> Diagnostic cable – POLARIS IC index

Diagnostic cable – APRILIA Sagem system* Diagnostic cable – APRILIA D-Tech system * Diagnostic cable – TRIUMPH /VICTORY/OBD Diagnostic cable – PEUGEOT Diagnostic cable – BMW 1999 < Diagnostic cable – DUCATI 2010> Diagnostic cable – BIMOTA Diagnostic cable – MV AUGUSTA 2012> Diagnostic cable – BMW Road and Offroad Diagnostic cable – KTM

TEX S04933

(*) Works in combination with the main diagnostic cable – TEX 3151/AP01 only

The kit contains: AM01 – main cables AM01 CAN main cable AM02 – HONDA, TOHATSU (PGM-FI) AM04 – MERCURY I MARINER group 2 PIN cable AM05 – MERCURY I MARINER group 4 PIN cable AM06 – YAMAHA/SELVAAM07 – VOLVO PENTA 6 PIN cable AM09 – VOLVO PENTA KAD-TAMD AM13 – EVINRUDE AM14 – 10 PIN VOLVO, MERCRUISER, CRUSADER, PCM AM16 – VOLVO, MERCRUISER, CRUSADER, ILMOR, INDMAR, PCM AM18 – 8 PIN VOLVO PENTA EGC-EVC AM22 – 4 PIN SUZUKI AM25 – MERCURY, MARINER, CUMMINS group cable from 2010 IC index

TEX S04990

NOTE: In order to connect cables dedicated for a given car-make, a main cable and power supply lines (lighter/battery) are required.

Main and power supply cables for Bike/Marine (for Navigator NANO/NANO S) IC index

TEX 3903911

Main and power supply cables for Bike/Marine (for Navigator TXTs/TXC) IC index

TEX 3903689

DIAGNOSTICS AND TESTERS

mega macs 66

STAND-ALONE ENGINE DIAGNOSCOPE WITH 12.1” TFT TOUCH-SCREEN DISPLAY Standard equipment: DT66 diagnostics module Internal battery ST2 cable equipped with an OBD II/EOBD socket Wireless module – air macs base One-year software subscription Basic kit: (colour green) IC index

8PD 010 601-131

(colour grey) IC index

8PD 010 601-731 Optional equipment: MT66 diagnostics module (2-channel oscilloscope + multi-meter) Current clamps: blue (0-700 A), green (20 mA-40 A) Low pressure measuring kit – LPD-Kit Connection cables Diagnostic software for BIKE

Mega macs 56

This is the latest diagnostic tester made by Hella Gutmann Solutions. This compact, lightweight and portable diagnostic system is equipped with the latest diagnostic tools which provide (in conjunction with the PLUS licence) real-time solution suggestions based on read-out error codes. The portable universal mega macs 56 system can do everything that you cannot do without in your workshop. Basic equipment: DT VCI diagnostics module Internal battery ST2 cable equipped with an OBD II/EOBD socket Bluetooth adapter for PC communication USB cable One-year software subscription

Optional equipment: MT56 diagnostics module (2-channel multi-meter) Current clamps: blue (0-700 A), green (20 mA-40 A) Docking station Connection cables Diagnostic software for BIKE

Standard kit: (colour green) IC index

8PD 010 601-191

Tester mega macs 56 + multi-meter module IC index

SPECIAL OFFER

8PD 010 601-191/SET

Tester mega macs 56 + docking station IC index

SPECIAL OFFER

8PD 010 601-191/SET1

(*) Limited special offer. Subject to stock availability.

Mega macs 42 SE (3.5” display) Standalone, wireless tester for passenger cars. IC index

8PD 010 601-151

Mega macs PC FullDiag

SPECIAL OFFER

Wireless module for PC/laptop with DATA PLUS software; additionally, upon the purchase of mega macs PC FullDiag you receive: - HGS Data (access to two more stations at the technical database portal) - Upgrade package (diagnostic software upgrades for 12 months) IC index

8PD 010 601-931/SET

(*) Limited special offer. Subject to stock availability.

DIAGNOSTICS AND TESTERS

Engine diagnostics and exhaust gas analysis FSA 740 Edition Diagnostic system with KTS 560 Trolley equipped with a measuring module, TFT monitor, computer, printer, KTS 560, remote control, UNI cable, printer cover, liquid pressure measuring kit, 2 x Y-adapter and universal capacitive probe KV (OBD, ISO, SAE, CAN protocols). Keyboard not included. IC index

0 684 012 742

FSA 740 Edition Diagnostic system without KTS 560 Trolley equipped with a measuring module, TFT monitor, computer, printer, remote control, UNI cable, printer cover, liquid pressure measuring kit, 2 x Y-adapter and universal capacitive probe KV (OBD, ISO, SAE, CAN protocols). Keyboard not included. IC index

FSA 720 Measuring module Measurement probes, power supply charger, UNI cable. IC index

0 684 010 500

Recommended extra equipment

Current clamps 30 A IC index

1 687 224 969

FSA 500 Diagnostic system FSA 500 in the storage case, power charger with cables, USB cable, Multi 1/Multi 2 and B+/B- connecting cable, cable for 1/15 terminal (universal cable II), induction probe, 1000 A current clamp, air pressure measurement kit with elastic cable, universal KV probe, remote control sensor IC index

FSA 050 Hybrid tester

Hybrid drive tester, radio communication with PC-based systems (with a computer, laptop, FSA 7xx, FSA 500). High-voltage and insulation control in electric and hybrid drive systems by means of a high-voltage measuring head and 2 measuring cables. Storage case, Bluetooth-stick IC index

0 684 010 050

Perfectly prepared kit for current and future requirements in the field of exhaust gas testing. This comfortable exhaust analysis system offers quick and cost-effective testing of diesel, petrol and gas-fuelled vehicles. Premium trolley, version BEA 950 Uni S1 with PC, monitor, remote control, A4 colour printer, BEA 055, 4/5-gas analyser module (CO, CO², HC, O², optional NO), BEA 070, opacimeter module, Bluetooth, BEA 030, rotational speed measurement module, Bluetooth (B+/B-, TN/TD, Kl1/15, temperature), measuring probe (vehicles powered by petrol) with 8-m cable, probe (diesel-fuelled vehicles) with 1-m cable, BEA PC Software IC index

0 684 120 360

0 684 010 512

BEA 750 Uni Kombi

The BEA 750 station has been developed in close cooperation with mechanics and optimised for daily work at your station. This compact trolley is equipped with such advanced elements as an SSD and a high-resolution touch-screen display, making it a modern and forward-looking solution. BEA 750 Uni Combi is a basic unit provided with an exhaust gas analysis module (BEA 065), an opacimeter (BEA 070) and a trolley equipped with a touch monitor and a thermal printer, as well as a B+/B- battery or a lighter socket connection cable. It includes: a WLAN card for a DIN A4 printer, exhaust gas probes and hoses for passenger cars, a remote control, and the BEA PC Uni application. IC index

Exhaust gas analysis – BEA 950 – BEA UNI S1 series

0 684 010 740

0 684 750 304

BEA 950 Uni S2

This efficient BEA 950 Uni S2 is particularly suitable for everyday inspection works. Its wireless connection with your current workshop computer makes the unit a cost-effective system for emission control in vehicles powered by petrol, gas and diesel. It is characterised by easy and fast operation. Medium trolley, fully cabled, with A4 colour printer, BEA 055, colour printer, 4/5-gas analyser module (CO, CO², HC, O², optional NO), BEA 070, opacimeter module, Bluetooth, BEA 030, rotational speed measurement module, Bluetooth B+/B-, TN/TD, Kl1/15, temperature), measuring probe (vehicles powered by petrol) with 8-m cable, probe (diesel-fuelled vehicles) with 1-m cable, BEA PC Software IC index

0 684 120 359

DIAGNOSTICS AND TESTERS

BOSCH diagnostic kits KTS 350

KTS 460

(10”) – stand-alone diagnostic tool (without software) IC index

- complete kit for wireless diagnostics - DCU 100 plus (10”) with KTS 560 module (without software)

0 684 400 350

IC index

KTS 960

KTS 980

- complete kit for wireless diagnostics - DCU 220 (11.6”) with KTS 560 module (without software) IC index

0 684 400 460

- complete kit for wireless diagnostics - DCU 220 (11.6”) with KTS 590 module (without software)

0 684 400 912

IC index

0 684 400 922

Diagnostic interfaces – BOSCH (for PC/laptop) KTS 560 Wireless module with 1-channel multi-meter (without software) IC index

0 684 400 560

KTS 590 Wireless module with 2-channel oscilloscope (without software) IC index

0 684 400 590

KTS TRUCK Wireless diagnostic module for TRUCK (without software) IC index

0 684 400 512

DIAGNOSTICS AND TESTERS

PDL 5500 Tester

This is an advanced, stand-alone tester designed for specialised diagnostic works, equipped with a component tester, two-channel oscilloscope and multimeter. The device combines the features held by the PDL4000 diagnostic tester and the VANTAGE PRO components tester. A one-year software subscription is included in the price of this unit.

IC index

PDL5500

PDL5500 FEATURES EASY OPERATION • One keyless adapter for EOBD-compliant vehicles, testing conducted without the need to change adaptors • Navigation via 8” touch-screen display or classic navigation buttons • High-capacity microSD card for storing diagnostic, testing and measurement data • Capability to connect to a PC via a USB port, reading printed, sending and storing diagnostic data via the ShopStream Connect application • Compact design, dimensions: 285x50x150 mm, lightweight: 1.2 kg MEASUREMENTS • Graphical view of current data • 2-channel digital multi-meter • 2-channel high-frequency oscilloscope • Components tester with guide – includes step-by-step tests, automatic configuration, connection information and expected values

PDL 4000 Tester

This is a stand-alone tester with a built-in 7” colour touch-screen display and independent power supply with a lithium-ion battery. The unit is designed to be used in harsh workshop conditions and is shock- and dirt-resistant. The installed software supports 31 European and Asian car-makes as well as 23 American cars. It is simple in operation, its menu is clear, all the features and procedures are described in detail step by step. The PDL 4000 unit holds full diagnostic and service functionality: readout and deletion of errors, readout of current parameters in numerical and graphical form, service features, programming, adaptations, calibrations and control system configurations. The unit also features advanced analysis features on current parameters, which lets testing staff to define own fault criteria, automatic graphic recording of all current parameters, their recovery and analysis directly on the tester or via Shop Stream Connect software (included with the tester). IC index

FUNCTIONALITY • Manufacturer diagnostics for most European, Asian and American car-makes, complete EOBD diagnostics • Operation of a variety of systems, including TPMS pressure monitoring system, active suspension, parking assistant, hybrid drive etc. • Support for specific fault codes per individual manufacturer, current data functional tests, adaptations, programming, coding, service resets • Multi-meter, 2-channel 6 MHz oscilloscope, 3 MHz bandwidth, automatic configuration, automatic triggering, peak detection, cursor activation, signal deviation detection SPEED • High-performance lithium-ion battery charged from a vehicle diagnostic socket • SMX operating system (specially dedicated to operate the diagnostic software) • Super quick start – ready for work in 5 seconds

PDL 3000 Tester

These are advanced stand-alone diagnostic testers designed to conduct quick diagnostic works. Features: Service Interval Reset, readout of faults with descriptions, deletion of codes; unique readout of current PID data simultaneously with descriptions: graphically and numerically, data grouping, creation of user’s lists, data on the screen, printout of codes and data; procedures on calibration, programming, configuration, adaptation, activation of actuators, service procedures (replacement of brake pads, DPF, FAP filters etc.). (with OBD II cable) IC index

PDL3000

A one-year software subscription is included in the price of this unit.

PDL4000

A one-year software subscription is included in the price of this unit.

Range of diagnosis: PDL 3000: European cars PDL 4000: like PDL 3000 + American and Asian cars (on the US and AUSTRALIA market) – the software is in English

JALTEST Diagnostic tester

Specially designed for trucks, buses and working machines. The tester provides a wide range of diagnostic options to perform the most advanced maintenance and repair operations, including: calibration and adjustment of required component settings, readout of errors together with descriptions, deletion, monitoring of current parameters taken from sensors and actuators, performance of their active tests of such actuators. The tester is offered together with a one-year licence for software upgrades, cable kits for semi-trailers, buses and trucks of various car-makes and together with the technical information database. IC index

JALTEST/SET BASIC

DIAGNOSTICS AND TESTERS

PDL5600 – Newest diagnostic tester from SNAP ON / SUN company

only at INTER CARS

PDL5600 is an advanced self-contained diagnostic tester for specialized diagnostic work, equipped with a component tester, two-channel oscilloscope, multimeter and Technical Service Bulletins available on-line.

Functions:

- Resetting the SIR service (Service Interval Reset) - Reading fault codes with description - Code cancellation - Readout of current PID data with description - Graphically and numerically - Data grouping - Creating a user list - Stopping data on the screen - Procedures for calibration, programming, configuration, adaptation, activation of executive elements, service procedures (replacement of brake pads, DPF, FAP filters, etc.). - Diagnostic component tester - Allows parallel diagnosis thanks to built-in two-channel oscilloscope and graphic multimeter. - Over 12,000 tests assigned to specific car models - Tested components (among others): ignition system, injectors, fuel pump, EVAP, EGR, flow meters, Lambda sensors, sensors for: camshaft position, shaft crank, engine temperature, air temperature intake pressure, air pressure, system pressure recharging, speed, acceleration, throttle position etc.

CHARACTERISTICS

- Colourful LCD touch screen - 8” - Intuitive operating system - Lithium-ion battery, charged while the tester is connected to the vehicle - Power indicator - Compatible with CAN - Quick identification of the vehicle - Recall the last 20 vehicles - Saving and storing data on a micro SD card - Programmable „S” button - Data management and printing using Shop Stream Connect ™

NEW

- By choosing the type of test you get: - Information about the tested component, its location, connection and testing method as well as expected results - The step-by-step instructions will allow you to measure correctly and configure the device automatically - You can compare the received result of the signal waveform with expected signals. The device has over 5000 standard signal samples - You can determine if the component is actually damaged before you replace it - Defined advanced tests for dual-channel measurements - Training module - Tutorial - Technical Service Bulletins (TSB) - Technical Service Bulletins issued by vehicle manufacturers containing diagnosed faults and technical problems. Technical Bulletins are available online (required wireless internet connection) for users with active software subscription. IC index

PDL5600

SOFTWARE

- EOBD diagnostics of 67 manufacturers - Diagnostics of 31 manufacturers Europe + Asia (Polish language) - Vehicle diagnostics from the US market (English)

ADVANTAGES

- Two consecutive updates included in the device price - Update twice a year - Update via the Internet - 2 years warranty - Free on-line technical support

DIAGNOSTICS AND TESTERS

WABCO Diagnostic interface for trucks / trailers / semi-trailers / buses WABCO Diagnostic interface WABCO Diagnostic interface together with the cable case for trailer / semi-trailer (without licence) IC index

(without extra cable and licence)*

446 301 030 0

IC index

446 301 023 0

IC index

246 301 900 0

Licence for trailer/semi-trailer IC index

Cable case for TRUCK - for motor vehicles IC index

WABCO Licences and licence packages** FULL package - licence for trailer/semitrailer, motor vehicles, buses

NEW

446 301 025 0

Licence for motor vehicles

246 301 901 0

IC index

Licence for buses

246 301 904 0

IC index

246 301 902 0

* Additional cables required. The offered kit also includes single cables for BUSES. ** One-year licences. The purchase of an individual licence allows for initial diagnostics under this licence. All the regulations and codes are available after receiving appropriate trainings at WABCO. More information on additional accessories, licences and training price-list is available at INTER CARS representatives and consultants.

DELPHI Diagnostic tester DS150E NEW VCI DS150E NEW VCI supports the following software: CAR / TRUCK

This one-year licence provides access to A minimum 3 upgrades for 12 months in the range of vehicle technical data (for the CAR version) via the technical hot-line.

OTC D750 Diagnostic Tester

DS150E NEW VCI (without software) IC index

Licence for CAR MAX IC index

PLHSV10546

PLHSV10516

Licence for TRUCK IC index

DS150E NEW VCI tester with latest CAR MAX software (without subscription)* IC index

PLHSV10546SW

NEW

The OTC D750 unit is a tablet equipped with a 10.1” large touch-screen wirelessly connected to the (VCI) EURO 5/ PASS-THROUGH OTC D750 diagnostic module. It is operated under Windows 7 and contains the HUB diagnostic software with its ready-for-use active ‘D’ diagnostic module. The ease of use and diagnostic capabilities are its key features. It was achieved through the application of automatic VIN detection and – as a result – vehicle selection, comprehensive scanning and customised troubleshooting instructions, integration with built-in service schedules and provision of service shortcuts are based on car manufacturers’ information. Optionally, the standard HUB “D” diagnostic software can be extended with the following additional modules: D + T – Diagnosis and fault finding (the price of one-year subscription is xxx net) D + T + M – Diagnosis + Fault finding / Repairs + Service info. (the price of one-year subscription is xxx net) The cost of one-year HUB ‘D’ (diagnosis) subscription is xxx net. The D750 kit includes • OTC D750 • D650 diagnostic module (Bluetooth connected with the D750 unit) • SD card to boot MS Windows (no DVD drive provided) • Battery • Cable to connect the D750 unit to the cigarette lighter • Power charger • 16-pin OBD cable • Operating manual • Storage case with a removable cover for work at a workshop trolley

PLHSV10821

SPECIAL OFFER

(*) Limited special offer. Subject to stock availability.

SPECIAL OFFER

Replace your “old diagnostic tester” with the latest-generation PDL 4000 or PDL 5500

Now all holders of “old generation” diagnostic testers can already take advantage of the above special offer and purchase the latest-generation PDL 4000 or PDL 5500 testers at a discounted price:

PDL 4000 IC index

PDL4000/W

PDL 5500 IC index

PDL5500/W

OTC D750 (with one-year HUB D subscription) IC index

0 684 400 750

(*) A one-year software subscription is included in the price of the tester. You have to return your old tester at the latest on the hand-over date of the new one. Limited offer. Subject to stock availability.

DIAGNOSTICS AND TESTERS

G-scan TAB

- BlueTooth wireless communication - Works with a PC or tablet* - Coverage of car-makes just like in G-scan 2 - One-year upgrade subscription included in the price IC index

G-SCAN TAB

For more information go to www.gscan.com.pl and visit your INTER CARS representative. (*) the offer does not include the tablet

B-TOUCH ST 9000 Diagnostic tester

Features - Stand-alone diagnostic unit with its software in Polish - Advanced diagnostics of European and Asian car-makes covering more than 84% of the market of vehicles registered in Poland (based on the data from 06.2017) - Adjustments and activation of actuators - Coding and advanced service features with their procedure specifications - Graphical comparison of current and recommended parameter values - Set of typical vehicle-specific defects, including repair instructions

NEW

- Possibility to extend the software with the following additional packages: B-PS Info HaynesPro* technical database, extension of the B-PS Info feature with assistance in the diagnostics of B-PS TUTOR* error codes, readout and coding of PUK* keys, set of service features for the FORD SPECIALIST* group. * These additional packages are not included in the price. IC index

BTOUCHEOBD

CONNEX Multifunction diagnostic tester with technical support

NEW

Features: - Wireless diagnostic tool with its highest operating speed and performance. - Direct access to technical data, drawings and electrical diagrams. - Online chat with technical staff, active diagnostic assistance, access to additional diagnostic data - Constant Internet connectivity provides full technical support Auto vehicle search, search by VIN, automatic detection of selected controllers or all electronics - Loyalty programme â&#x20AC;&#x201C; get points for everyday use and exchange them for free upgrades. - Full diagnostic overview including fault identification, identification and location of any defective item and provision of part number. IC index

BBCONNEX

DIAGNOSTICS AND TESTERS

ADAS sensor and camera calibration system The Advanced Driver Assistance Systems (ADAS) is the universal TEXA kit for camera calibration composed of numerous panels designed for various car-makes. They allow for the proper calibration of sensors in the driver assistance system, such as: a close- or longrange radar or camera. The kit works in combination with TEXA IDC5 diagnostic software and provides complete panel instructions for every car-make and model. It contains information such as: panel details (height), distance from a vehicle, convergence, etc. which guide workshop staff – step by step – through all calibration steps. Moreover, the modular architecture of this solution enables to develop the most optimal combination of panels for every workshop. The system only works in combination with the TEXA diagnostic series.

ADAS kit suggested to calibrate cameras

(the kit includes a mounting bracket and calibration tables for KIA, Mercedes, Renault and VAG) IC index

TEX S12610

KIT ADAS TRUCK – Now Available!

NEW

The Camera Calibration Kit is now also available for the TRUCK environment. The TEXA solution for driver assistance systems, which allows for precise and efficient calibrations, includes: - optical control system (measuring and laser bars) required to ensure the correct convergence and subsequent calibration of radars from such manufacturers as: WABCO, TRW and TRW/Knorr - camera calibration panels for individual car-makes

PREMIUM kit for TRUCK calibration

Basic kit for TRUCK calibration

(this kit includes a calibration rack, calibration tables for MAN / SCANIA / IVECO / IVECO / VOLVO / RENAULT, calibration laser for radars and measuring heads)

(this kit includes a calibration rack, calibration tables for MAN / SCANIA / IVECO / VOLVO / RENAULT and measuring heads)

IC index

TEX 3907971

IC index

TEX 3907861

ACCESSORIES

Exemplary accessories not included in the TEX S12610 kit Calibration table for HONDA Calibration table for VW IC index

TEX 3907338

IC index

TEX 3907349

Calibration table for NISSAN/INFINITI IC index

TEX 3907346

DIAGNOSTICS AND TESTERS

ESI[tronic] 2.0 software The ESI [tronic] 2.0 with the complete vehicle diagnosis: (SD) controller diagnostics: the latest diagnostic software for systems installed in passenger vehicles, vans, trucks, buses and trailers (SIS) service information: troubleshooting instructions, error codes, diagrams and schematics (M) mechanics: all inspection and maintenance details, timing settings, tightening torques (P)electrical diagrams for comfort systems: prompt localisation of faults in electrical installations (TSB) Technical Service Information: quick access to troubleshooting instructions for typical faults ESI[tronic] by Bosch, the world’s leading workshop program, was provided with its revised, more structured operational concepts and principles. The new ESI[tronic] 2.0 interface allows getting to the point faster with just a few mouse-clicks. Once your vehicle is uniquely identified (using the tester it is also possible to automatically read its VIN number), you go through the “System Overview” menu items directly to vehicle diagnostics. In the window with all the identified systems you will see – thematically and clearly arranged – all the names of the controllers and any faults errors assigned to them. You can also quickly navigate through direct links, called shortcuts, between and among different types of information offered by your Bosch software package. For example while moving from the controller diagnostics program to the fault search tab and vice versa. The ESI[tronic] 2.0 can be upgraded regularly over the web, so that your workshop always works with the most up-to-date data. The ESI [tronic] 2.0 software is available in 1-year and 36-month option. Package ESI A, SD ESI A, SD, SIS ESI Mechanic (A, SD, SIS, M, TSB) ESI Electric (A, SD, SIS, P, TSB) ESI Profipack (A, SD, SIS, M, P, TSB) ESI TRUCK

The SD package can be used for the KTS 200 unit only. ESI Truck can only be used with the KTS Truck unit.

CSC-Tool (Camera & Sensor Calibration Tool) by Hella-Gutmann

The CSC-Tool is a complete system used to calibrate driver assistant systems. In combination with the Hella-Gutmann diagnostic unit, you can calibrate: front camera of the lane departure warning system, ACC (Adaptive Cruise Control) radar sensor or adaptive lighting system camera. The optional CSC-Tool can be equipped with, among others: calibration tables for camera systems made by: Renault, Nissan, Kia, Toyota, Mazda, Honda, Hyundai, Lexus and radar sensors: CSC- Radarkit and CSC- Radarkit II for distance and braking control systems in the most popular car-makes. (the CSC-Tool standard kit includes VW and MERCEDES tables). Features: All measurements can be configured and made using the CSC-Tool components on virtually any level ground in a typical mechanical workshop. No special workstation for axle geometry measurement is required. Easy operation High measurement accuracy Reliability and durability Optional individual configuration Compatibility with diagnostic testers from within the mega macs family CSC-Tool Camera & Sensor Calibration Tool (with tables for VW & MERCEDES) IC index

8PD 010 601-911

DIAGNOSTICS AND TESTERS

Software – subscriptions and upgrades for diagnostic testers PROMO package*

– This is an offer for holders of TEXA testers without an active licence for software upgrades for passenger cars and trucks. As part of this package, every holder receives all “outstanding” versions + a one-year subscription for software upgrades.

PROMO CAR package (passenger cars)

PROMO TRUCK package (trucks)

TEX ABO CAR PROMO

IC index

SPECIAL OFFER

TEX ABO TRUCK PROMO

IC index

(*) the offer does not apply to old-type units: AXONE 2000/ Navigator Classic-Wireless/ Navigator Mobile/ AXONE 3 Mobile/Tribox/Axone Direct Limited offer. Subject to stock availability.

Software list of AGRI / CONSTRUCTION

(construction machinery) and BIKE (not covered by the PROMO package): Subscription version (outstanding versions + one-year subscription)

AGRI/CONSTRUCTION/BIKE

Current versions of the TEXA software: CAR – 65, TRUCK – 43, AGRI/CONSTRUCTION – 16, BIKE – 29

licence for CAR/TRUCK

– This is an offer for holders of DELPHI testers without an active licence for software upgrades for passenger cars and trucks. As part of this package, every holder receives all “outstanding” versions + a one-year subscription for software upgrades.

licence for CAR IC index

PLHSV10516

IC index

PDL3000

PDL5500

(for units with an active subscription)

AKT PDL3000 CONT

IC index

(for units with an inactive subscription)

IC index

PLHSV10821

LIST OF UPGRADES AND SUBSCRIPTIONS Subscription version (one-year subscription) PDL4000

(for units with an active subscription)

IC index

licence for TRUCK

(for units with an active subscription)

AKT PDL4000 CONT

IC index

(for units with an inactive subscription)

AKT PDL3000 BEZ CONT

IC index

AKT PDL4000 BEZ CONT

IC index

One-off version (one-off upgrade to the latest version) SOLUS PRO tester IC index

AKT SOLUS PRO CDIF/3 tester

AKT PDL5500 CONT

(for units with an inactive subscription)

IC index

AKT PDL5500 BEZ CONT

VANTAGE PRO

AKT VANTAGE PRO

List of upgrades and subscriptions

Subscription version (half-year subscription + technical support only for an active subscription as an extension)

Subscription version (one-year subscription + technical support)

Break in the subscription for more than 30 days results in charging an activation fee.

TEXA FOR LOYAL HOLDERS List of upgrades and subscriptions

This special offer is addressed to holders of no-longer-supported, old-generation TEXA diagnostic units*. As part of the promotion, a holder of any tester with the CAR or TRUCK software will be entitled to purchase a new Navigator TXTs unit and upgrade it to the latest version of its software on preferential terms.

testers: mega macs 42/56/66/PC

(*) The offer applies to the following units: AXONE 2000, Navigator Classic and Navigator Mobile.

Licences

IC index

8PY 010 600-161

Update licence

8PY 010 600-331

tester: mega macs 66

Navigator TXTs in the TEXA offer for loyal customers:

Licence packages (12 months) The following is applicable for mega macs 66/56: packages just like for 42 + special packages listed below.

Update & Repair Plus Flat

(software upgrade + access to the technical data + repair tips and interactive wiring diagram+ Call Center)

IC index

8PY 010 600-771

SPECIAL OFFER

(software upgrade for a further 12 months)

tester: mega macs 56 Update & Repair Plus Flat

(software upgrade + access to the technical data + repair tips and interactive wiring diagram+ Call Center)

IC index

This special offer is subject to stock availability. In order to be applicable for the promotion, you must upgrade your software to the latest software for CAR or TRUCK or purchase the subscription for TRUCK (for PLUS version holders).

Upgrade for CAR: IC index

IC index

G-SCAN UPDATE

Subscription for TRUCK:

TEX AKT CAR

IC index

TEX ABO TRUCK PROMO

Upgrade for TRUCK:

G-SCAN subscriptions and upgrades

One-year subscription covers software update of outstanding versions and one-year long access to upgrades

TEX D072A1

(for LIGHT version holders):

IC index

TEX ABO TRUCK PROMO +

IC index

TEX AG9700PT

This special offer is subject to stock availability.

For detailed information, contact your IC Sales Representative. 22

DIAGNOSTICS AND TESTERS

TEXA TPS2 – the new TPS2 pressure sensor control device which facilitates performing required works while providing a full range of functionalities.

The TPS2 unit has been designed to provide simple and fast communication with TPMS sensors. Its durability, speed, intuitive graphics and a display which, thanks to its dimensions, shows all the necessary information on a single screen, make the unit a new benchmark of functionality in the world of TPMS. The 5 megapixel HD camera with the AF feature can be used to create photographic IC index

NEW

documentation left in the client register, or to read QR codes. The TPS2 unit has a 4 GB internal memory which can be increased with a micro SD card. This allows to prepare and view reports on any service performed and to effectively manage seasonal wheel replacement at any time.

TEX D13340 Features of the TPS2 unit: – tests of sensors (ID reading, pressure, temperature, battery status, etc.); – cloning of sensors – programming of universal sensors from the central unit – Hamaton EU-Pro, Schrader EZ-Sensor, Alligator Sens.it, Huf IntelliSens – access to the technical database – preparation of reports: the unit provides every service with a QR code, which allows to access the data of any selected vehicle when programming a new set of sensors and to use the same data

* Optionally, the Nano Service module will also be available to communicate with the TPMS control unit of a given vehicle, read and erase errors as well as assign new sensors to the control unit developed for individual vehicles.

TPS (Tyre Pressure Service)

This is a basic tool offered by TEXA for tire service which features an exceptionally wide diagnostic coverage of commercially available car-makes and models as well as traditional quality and robustness of its construction. The TPS unit diagnoses: battery charge status, sensor identification details and all other diagnostic information made available by the manufacturer. IC index

TEX D10840

AXONE S TPS

Together with the TPS KEY module and Navigator Nano S interface, this is a mobile diagnostic kit made by Texa dedicated to support TPMS systems in vehicles. The kit allows for communication not only with TPMS sensors (as in the case of its standard version) but also with vehicle controllers via an OBD socket. In addition, the AXONE S TPS unit is equipped with the FAST-FIT software, which enables to extend its diagnostic capabilities with a number of other features, among others, in the field of suspension electronics, replacement and inspection of brake pad electronics, replacement of batteries, start-stop systems and electric vehicles, regeneration of particle filters, replacement of indicators, lighting and many more. IC index

TEX Z11013

Special-offer kit with a printer IC index

TEX D10840/PROMO

Thermal printer for TPS IC index

TEX 3906533

USB key

for AXONE 4/ MINI /S/ NEMO to operate pressure sensors in tires IC index

TEX D10940 The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

DIAGNOSTICS AND TESTERS

Diagnostic units to support TPMS systems

NEW

UNIT FOR SUPPORT OF PRESSURE SENSORS IN TYRES: VDO TPMS PRO/ PRO PRINTER

This is the latest multifunctional unit made by VDO developed for car service centres (EUROPE, ASIA, USA) equipped with TPMS systems. The TPMS PRO unit features a high-resolution 4.3” colour display with a clear, multilingual menu. Its ergonomic keyboard and icon-based navigation make it easier to operate menus and diagnostic functions implemented in the unit such as: readout and deletion of errors, temperature, pressure and battery status, system activation/deactivation, programming of universal sensors (Alligator, HUF IntelliSens, Schrader EZ-sensor).

VDO TPMS PRO

VDO TPMS PRO PRINTER

Features: Display: TFT 4.3” colour Integrated help function (service instructions) Multilingual menu (D, GB, F, ES, NL, IT, PL, PT, HU, RO, FI, DK, N, S, CZ) One-year subscription included in the price Bar-code scanner Data transfer via USB, Wi-Fi and SD cards Bluetooth (for wireless printing) Dimensions: 200 x 120 x 85 mm Weight: 682 g Protection class IP54

The kit includes: VDO TPMS PRO OBD II + connecting cables mains power charger + UK adapter USB cable operating manual protective case docking station with charging facility and thermal printer (in the VDO TPMS PRO PRINTER version only)

IC index

A2C59506457

IC index

Hamaton TPMS H36

A2C59506643

NEW

Hamaton TPMS H36 diagnostic unit used to service pressure control sensors in wheels (Europe + USA)

IC index

HAM-D030

HAM-D045

HAM-D030/H

TPM-TOOL

It allows for programming and direct read-out of sensor data (ID number, temperature, battery status), activation of sensors, programming of universal sensors including cloning. It supports the following systems: Schrader- EZ-Sensor, Alligator- Sens.It, Huf -IntelliSens, VDORedi. The PC software contains a database of torque details for both original and universal sensors as well as instructions for electronic activation of newly installed sensors.

0 684 400 250

The price includes software upgrades for 3 months.

IC index

The H36 unit, programming of universal sensors only: EU-Pro/T-Pro 1&2, EU-Pro/T-Pro Hybrid with a 5-year subscription for upgrades included in the price. IC index

TPA 200

IC index

NEW Device for full TPMS sensor support (Europe + USA)

This device has all the functionalities of the Hamaton H36 unit, but it additionally features the possibility to adapt sensors via the OBD connector (included in the set). In combination with the TPMS adaption procedures, technical information and a 2.8” colour display, the Hamaton H46 unit is a complete solution for servicing wheel pressure sensors.

Features: - diagnostics of sensors (can read approx. 99% of sensors) - activation of sensors - ID identification, readout of temperature, pressure and battery status - cloning of sensors - programming of universal sensors – Hamaton EU-Pro 1&2/T-Pro 1&2, EU-Pro Hybrid, T-Pro Hybrid, Schrader EZ-Sensor, Alligator Sens.it, Huf IntelliSens, ALCAR The kit includes: - database for EUROPE/USA - last vehicle details kept in memory - user-friendly interface - frequent database upgrades The kit contains: - Hamaton H36 unit - USB cable - upgrade software - use and upgrade instructions

Hamaton H46

It is equipped with a 600 x 310 x 485 mm display and a clear menu. Its ergonomic keyboard with 7 buttons (resistant to dust, water and grease) makes it easier to operate menus and diagnostic features implemented in the unit, among others, such as: readout and deletion of errors, temperature, pressure and battery status, system activation/deactivation, programming of universal sensors (Alligator, HUF IntelliSens, Schrader 1EZ-sensor). The software also has a technical database of operating instructions, torques, sensor parameters, etc. IC index

8PD 010 601-921

DIAGNOSTICS AND TESTERS

Diagnostic units to support TPMS systems

Stand-alone Sensor-AID (without sensors) IC index

CUB ELECPARTS

CUB TESTER

This is a universal kit used for diagnosing and programming TPMS pressure sensors. The kit contains: TPMS SENSOR AID (EUROPE + USA) tester

OBD interface for Sensor-AID tester

The TPMS SENSOR AID Tester is a diagnostic unit which allows diagnosing TPMS pressure sensors (it reads out ID, pressure, temperature and battery status) as well as to clone and program universal sensors (CUB UNI-Sensor only) regardless of their manufacturer and the condition of the original TPMS sensors. It can diagnose and program up to 95% of vehicles present on the market equipped with the TPMS system. All software upgrades are run through the manufacturer’s website and are free of charge for SENSOR AID tester users.

Hamaton Tool Kit

CUB OBD

(adapter 1/4” 11-12 mm, bit adapter 1/4”, bushing 3/8” for 1/4”, torque wrench 3/8”- range: 2-10 Nm, torque wrench for valves – range: 0.45 Nm, rim protection) IC index

0XAT6202

HAM-6-313

Repair kits – valves

Universal service kits - kits dedicated for tire services

Starter Kit 1 contains: - 72 service kits for TPMS sensors - 20 aluminum Clamp-In valves - 4 rubber Snap-In valves - 25 nickel-plated valve inserts - 25 TPMS caps with gasket

exemplary valves: rubber 1 piece IC index

IC index

Toolkit for TPMS sensors

- TPMS sensor and valve replacement kit The kit contains: - Torque wrench - Adapters (7, 11, 12 mm) - Torx Bit (T10, T15, T20) - Torque screwdriver for valves - Torx T6 screwdriver - Tool for removing valve seals IC index

It allows adapting sensors via an OBD socket.

IC index

Starter Kit 2 contains: - 16 service kits for TPMS sensors - 24 rubber Snap-In valves - 32 aluminum Clamp-In valves

HAM-6-329

IC index

HAM-6-335

VL-TPMS-04

PRESSURE SENSORS FOR TPMS SYSTEMS – CUB, Schrader, VDO Universal sensors – intended for cloning / copying original sensors

Schrader EZ-Sensor 2.0 (rubber valve) Universal / programmable latest-generation sensor IC index

SCHR1210

Schrader EZ-Sensor 2.0 (aluminium valve)

This is the latest generation universal / programmable sensor with an adjustable valve angle for aluminium rims. IC index

SCHR2200

CUB Uni-Sensor

HAMATON EU-PRO Hybrid sensor

433 MHz version (Europe)

aluminium valve

Universal / programmable sensor dedicated to work with the CUB Sensor AID programmer.

IC index

CUB SENSOR433

315 MHz version (USA) IC index

CUB SENSOR315

This is the latest generation configurable sensor which uses LOS, WAL, PAL technologies.

IC index

HAM-HTS-A45BB

rubber valve IC index

HAM-HTS-A45BC

NEW

DIAGNOSTICS AND TESTERS

BASIC KIT

This 2-channel oscilloscope with measuring accessories allows measuring a variety of signals and run approx. 50 dedicated oscilloscope tests, among others: injector test throttle position test rotational speed sensor test ... and much more IC index

PICO PP945

STANDARD KIT

This kit with 2- or 4-channel oscilloscope and measuring accessories allows conducting approx. 90 dedicated oscilloscope measurements containing technical descriptions and calibrations. The kit includes, among others: measuring probes, 4 voltage dividers (1:20), current clamps 600 A and 60 A, 4 capacitive sensors for ignition. 4-channel kit: IC index

PICO PP923

2-channel kit: IC index

PICO PP922

PICO 4225/4425 OSCILLOSCOPE

WPS500X pressure transducer

This 2-channel or 4-channel PICO oscilloscope is a high-tech and functional unit which can transform a standard computer into a professional workshop oscilloscope. The kit contains: Picoscope 4225 or 4425 USB oscilloscope software (CD) 1.8 m USB cable

Thanks to its cooperation with the PICO oscilloscope and 3 measuring ranges, it allows checking, among others: compression pressure, vacuum pressure, fuel pressure and others. The kit contains: pressure transducer a set of adapters storage case IC index

2-channel oscilloscope IC index

PICO PP918

Current clamps (5 mA-30 A)

Precision clamps. Their extended measuring jaws enables measurements to be made in places with limited space. For DC measurements, a simple knob on the probe allows for zero adjustment. IC index

PICO PP939

4-channel oscilloscope IC index

PICO PP919

Ignition-test probe

This is an ideal solution for quick testing of standard ignition systems and COPs. IC index

PICO PP357

PICO TA234

CAN Test BOX

This module, when plugged into an OBC socket, allows for easy readout of signals from individual pins. Connectors got illuminated upon signalling. IC index

PICO TA069

ADVANCED 4CH KIT

This is a professional kit with a 4-channel oscilloscope and measuring accessories. The ADVANCED KIT is the most sophisticated vehicle diagnostics kit – it contains the 4CH STANDARD tools supplemented with the most popular accessories such as: additional current clamps 60 A, current clamps 2000 A, universal multipin-type extensions (a variety of sizes), fuse test grommets, ignition measurement probe (CoilOnPLug) and ignition cable extensions. IC index

PICO PQ035

For detailed information, contact your INTER CARS sales consultant / representative.

Find out more and check the functionality of PICO oscilloscopes at our product and technical presentation and in the “Diagnostics of oscilloscopes in 5 steps” Guide. The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

HaynesPro WorkshopData Ultimate

HaynesPro WorkshopData Ultimate WorkshopData Truck WorkshopData Car TECHNICAL AND DIAGNOSTIC DATABASE Inter Cars presents the WorkshopData Ultimate technical and diagnostic database offered by HaynesPro which provides workshops with data to streamline their workflow and increase profitability by saving time searching for the most important technical information in the automotive field. The Ultimate version is the complete and most comprehensive version of the database in the HaynesPro’s offer and includes all the modules specified below. HaynesPro WorkshopData Ultimate stands for: - One-year licence with access for 4 users - Database with mechanical, control details and repair times - Unique electronic data modules - SmartPack repair procedure packages with detailed technical drawings and troubleshooting solutions - Electronic fault identification and error codes assistant – VESA module - Continuous access to the database via supported mobile devices The WorkshopData database is not for passenger cars only. Inter Cars also offers all truck servicing workshops – the WorkshopData Truck version – also based on the HaynesPro’s resources.

HaynesPro Workshop Data Ultimate

HaynesPro divided the WorkshopData™ program into seven main categories: TECHNICAL SUPPORT ENGINE GEAR STEERING AND SUSPENSION SYSTEM BRAKES OUTER/INNER CAR BODY PARTS ELECTRONIC COMPONENTS Under each of these categories, wherever possible, we took into consideration the following data sets: control data, technical drawings, fuses and relays, instructions and procedures, repair time standards, wiring diagrams and diagnostics.

Moreover, the Workshop Data database includes the Smart Pack™ modules which offer verified prompts (SmartCASE™), technical service newsletters (SmartFIX™) and servicing data.

DOWNLOAD THE APPLICATION – BOOST YOUR HAYNESPRO PROGRAM. Follow the steps below to install the HaynesPro AR: 1. Find the HaynesPro AR in your Google Play or Apple Store 2. Install the application (make sure that you have enough free memory on your device) 3. Open the application and select: augmented reality trigger. 4. Point the unit at the photo near where the HaynesPro AR logo is located To discover more features, view this picture using the HaynesPro AR application.

TEST IT ON YOUR DEVICE

WHAT IS AUGMENTED REALITY (AR)? Augmented Reality lets to link the real world to the computer-generated one. Making use of an image from your camera you can see real-time 3D graphics, any prepared video or interactive information.

MORE CONTENT IN AUGMENTED REALITY IN THE HAYNESPRO WORKSHOP DATA

HaynesPro WorkshopData Ultimate VESA™ – your assistant in electronics! This intelligent assistant in vehicle electronics – in short: VESA™ is a unique diagnostic tool for electronic systems. Making use of the data extracted from the vehicle CAN bus system, the VESA module helps you to diagnose the system and component faults. Based on its intelligent step-by-step diagnostic procedure, the module generates local diagrams of components taken from the “network” and automatically shows dependencies between and among sensors, actuators and control panels in the CAN bus view.

HOW DOES IT WORK? - When you select a specific fault or component code, you can immediately start the diagnostics wizard. - It is just one mouse click away.... - Every subsequent step in your diagnosis requires a “yes” or “no” response. - You are provided with a specific solution or moved to the next step in the process. Fault code

Identification

System

Component

Diagnostics 1

Component

Diagnostics 2

Location

THE VESA™ UNIT PRESENTS THE FOLLOWING DETAILS: - Numbers of pins to be read out - Cable colours - Expected values - Oscilloscopic image (if possible)

WHAT MAKES

VESA™ MODULE

UNIQUE

- Components are analysed in an logical order – the most likely cause is shown first. - Intelligent references to diagnostic testing units at the system and fault-code level - Clear instructions on how to measure various values and compare them to default values - Localised diagrams for every component showing its relevant details only - Standard references to the general TecDoc part numbers (to export data to the parts catalogue or ordering system)

HaynesPro Workshop Data Ultimate WorkshopData Truck The HaynesPro WorkshopData™ – Truck Edition is a multilingual database of trucks made by a variety of manufacturers, developed specifically for independent repair and maintenance workshops of major truck makes. To assist truck workshop mechanics, the Workshop Data Truck provides repair instructions for various types of components such as axles, engines, gears and clutches, brakes and electronics. All diagrams make use of standard symbols, available in full-colour vector graphics which can be easily printed. The database contains detailed information on vehicles of all the major truck-makes in Europe (MAN, DAF, Iveco, Isuzu, Mercedes-Benz, Nissan, Mitsubishi, Renault, Scania and Volvo).

COMPONENT DATABASES The HaynesPro WorkshopData™ – Truck Edition module is equipped with a simple search-engine which allows checking any specific component by name. All searched data is sorted by car-make and/or filtered by a component group. Torque details for individual components are searched and printed the same way.

NEW APPROACH TO WIRING DIAGRAMS HaynesPro was the first company in Europe to offer ABS data wiring and engine management diagrams for trucks. Now this information on all major models and types is part of the HaynesPro WorkshopData™ – Truck Edition. In practical terms, we now offer the most complete set of wiring diagrams on the market. All diagrams make use of standard symbols, available in full-colour vector graphics which can be easily printed.

REPAIR TIME STANDARDS The Repair Time Standards module contains detailed descriptions of all repairs and their corresponding performance times. Not only it gives specific repair times, but also calculates their cost. Since the module takes into account both further operations as well as additional works, no work items are overlooked – neither in their cost specification nor on the invoice. It helps to maximise the level of revenues generated by an individual workshop. The WorkshopData Module is available in: Bulgarian, Croatian, Czech, Polish, Slovak, Slovenian, Romanian, Hungarian, Russian.

Now all the above and more at the HaynesPro WorkshopData Ultimate CAR or TRUCK!!!

4-SEAT LICENCE

WorkshopData Truck

WorkshopData Car

4-seat licence

IC index: HAYNESPRO TRUCK U4

IC index: HAYNESPRO CAR U4

Contact your Inter Cars representative or consultant to access the demo version today.

DIAGNOSTICS AND TESTERS

Autodata ON-LINE Service&Maintenance Autodata ON-LINE S&M autodata – dedicated data source for SKP and extensive knowledge base on TPMS.

The info database includes, among others General tips on TPMS

In addition, the application also includes: – tyre pressure levels and tyre sizes – special tools and diagnostic data for TPMS – schemes for the servicing of producers – electronic parking brake (EPB) – support for timing chains / belts – wheel geometry – repair times

TPMS operation and calibration

version for one workstation IC index

IC-AUTODATA-SM

30-day demo versions available

Technical database for ATF automatic gearboxes

Magneti Marelli is the first company in Poland to introduce an extensive database on automatic gearboxes. It includes 34 car brands, 654 models and over 3000 versions of these models, including those made by Asian and American manufacturers. Features of the application: – intuitive vehicle searching – drawings and photographs of actual system elements – information on the amount of oil in a given gearbox together with the serial number – location of connectors for the ATF fluid replacement unit – photographs and numbers of MM adapters matching specific connectors – gearbox rinsing procedure (with photographs and description) – filter replacement procedure (with photographs and OEM numbers) – photographs of oil bowl gaskets with their OEM number, oil level checking procedure – tightening torques of drain, filling, level checking plugs

IC index

009999270000

14-day demo versions available free of charge

DIAGNOSTICS AND TESTERS

Autodata ON-LINE in Inter Cars! AUTODATA BIKE ON-LINE Available now!!! We invite all users who are extending their CAR Diagnostic & Repair licences for special-offer discounts.

Among others, the CAR database contains: Location of components

Chains and timing belts

Interactive electrical diagrams

To meet the need of checking the completeness and quality of Autodata software, we provide our customers with a trial testing of the database prior to purchasing it on any chosen platform (tablet, notebook, smartphone). For more information, please contact INTER CARS sales representatives or visit our website.

Diagnostic & Repair licence (1 workstation) IC index

Diagnostic & Repair licence (2 workstations)

EXP-AUTODATA-DR BIKE ON-LINE licence (1 workstation) IC index

EXP-AUTODATA-BIKE

IC index

EXP-AUTODATA-DR/2

Diagnostic & Repair licence (5 workstations) IC index

BIKE ON-LINE licence (2 workstations) IC index

EXP-AUTODATA-BIKE/2

Service & Maintenance licence (1 workstation)

EXP-AUTODATA-DR/5

IC index

EXP-AUTODATA-SM

BIKE ON-LINE licence (5 workstations) IC index

EXP-AUTODATA-BIKE/5

DIAGNOSTICS AND TESTERS

AUTOLOGIC – DIAGNOSTICS AT THE DEALER LEVEL!!! Assist plus

NEW

This is the latest generation of the Autologic unit. It is a stand-alone diagnostic tester offering its functionality at the level of factory testers, which are available to dealers and vehicle manufacturers. Basic equipment: - diagnostic tester with its software for the following car-makes: BMW, LAND ROVER, JAGUAR, MERCEDES, PEUGEOT CITROËN RENAULT DACIA, VAG, VOLVO MINI - OBD 16-PIN cable - power supply unit - operating manual - storage case Additional adapters (e.g. BMW 20-PIN) are available as an option. Technical data: - 13.3” touch-screen display - Wi-Fi - Ethernet, USB IC index

- audio connector - built-in microphone and speaker - MS WINDOWS

AUTOLOGIC ASSISTPLUS

A one-year subscription for upgrades and technical support is included in the price of the unit.

Professional interfaces for chip-tuning – ALIENTECH K-Tag and KESSv2 The K-Tag and KESSv2 units by Alientech are innovative and state-of-the-art communication interfaces used to chip-tune passenger cars, trucks and agricultural tractors. As a result of using some of the best maps controlling the operation of PBXes by Quantum, chip-tuning is becoming one of the most efficient and affordable forms of tuning.

Alientech KESSv2

This is a professional interface used to read out and program controllers for passenger cars, vans, trucks and agricultural vehicles for their tuning via an OBD socket. Based on its simple procedures (programming via a diagnostic interface) and intuitive software, chip-tuning has never been so easy. The kit includes: - KESSv2 interface (slave) - storage case for the unit - CAR + BIKE protocols IC index

AT-KESSV2

KESSv2 MASTER interface (CAR + BIKE protocols) IC index

TRUCK, AGRI, MARINE protocols are also available for the KESSv2 unit.

AT-KESS/M

Alientech KTAG

This is a professional interface aimed to chip-tune controllers on a testing frame – it is possible to provide programming in passenger cars, vans, trucks and agricultural vehicles. The KTAG unit will be irreplaceable in models where you cannot run programming via an OBD socket. The kit includes: - KTAG interface (slave) - full range of protocols (when you program a controller, it is recommended to use a suitable power supply rectifier) IC index

AT-KTAG

KTAG MASTER interface (full range of protocols) IC index

AT-KTAG/M

The KESSv2 and KTAG units are offered without programming maps. In order to program, it is necessary to purchase credit points, which later you can exchange for maps dedicated to particular vehicles. 1 CREDIT POINT = 1 MAP, IC Index: QUANTUM CREDIT If you want to become an official Quantum Tuning partner and enter the world of chip-tuning, act fast!!! The number of workshops is limited.

Insoric RealPower Premium – BRAKE-STATION 4x4

This is a road brake-station which allows measuring performance values in motor vehicles. It is a mobile and prospective measuring unit. Making use of its innovative measuring procedures, it comprehensibly and precisely records such performance values with no specialised knowledge required. IC index

14IN00PRO

DIAGNOSTICS AND TESTERS

Alt Diag Pro – Magneti Marelli test workstation for testing alternators

The Alt Diag Pro unit is a test bench for testing the properties and performance of a given alternator or starter. This device evaluates measurement results by helping to diagnose faulty system components which may occur on particular components of the alternator or starter being tested. The workstation is used for tests of 12V alternators with a current of up to 300A and 24V alternators with a current of up to 150A, as well as for tests of starters with similar parameters.

NEW

The most important features of the device: – digitally-controlled 300-A load with an incremental control (by 1 A) for the precise control of the most demanding PC-controlled alternators as well as traditional structures – two modes of automatic alternator tests (performance – for testing the maximum performance of an alternator and standard, depicting the nominal operating conditions of an alternator in the car) – support for all digital protocols: COM LIN, BSS, C, RLO, SIG, L (including the latest designs of Toyota, BMW, MERCEDES) – support for 24-V digitally-controlled alternators (CAM BUS/LIN)

SPECIAL OFFER

– built-in oscilloscope used to measure current ripples – detection of damaged diodes and stators – fully automated alternator test – basic starter diagnostics function – integrated computer controlled with an industrial touch screen – autonomous updates (from a pendrive) – smooth rotation control – built-in extensive alternator database – compact size (80 x 70 x 110 cm) – printout of test results, if required

IC index

007935063050

SOME SELECTED PRINT SCREENS

Tested parameters of alternators The workstation allows for the precise diagnosis of alternator operation on the basis of the following parameters: – performance curve and current ripple diagram, – alternator leak current, – maximum alternator current and maximum alternator power, – charging voltage (Voltage Set Point), – excitation rotation (Turn On Speed), – DFM and WINDING values.

BANCHETTO JUNIOR

BANCHETTO PROFI

This is a compact workstation made by SPIN and designed to promptly control the operation of alternators and starters (12-24 V) in passenger cars and vans. IC index

These are professional workstations used to test alternators and starters as well as electric accessories for passenger cars and vans. Banchetto PROFI

SPIN 02.012.01

IC index

SPIN 02.004.05

(optional 400 V with no inverter and no motor speed control) IC index

SPIN 02.012.00

JUNIOR PROFI AltDiag Pro

Power supply

Motor power

Digital/analogue indicators

Max. alternator power

Mechanical brake

220 V 400 V 400 V

2,2 kW (3 Hp) 4 kW (5.5 Hp) 8.5 Hp

NO/YES YES/NO Screen

1200 W 2000 W no data available

NO YES NO

Tests on starter with a brake NO YES NO

Tests on diode plates NO YES YES

Tests on voltage regulator NO YES NO

Tests on capacitors NO YES NO

DIAGNOSTICS AND TESTERS

NEW

TF 5000 is the most modern SPIN device

It is designed to change oil and automatically rinse gearboxes in passenger cars and vans. Based on its well-thought-out dynamic change procedures, it allow to completely change oil in the system (gearbox + oil cooler + hydrocarbon clutch) and replace oil filter without any trouble. Moreover, the system can be rinsed with a special detergent in the automatic operating process.

ATF 5000 S-DRIVE

Features: - fully automatic service process - procedures on replacing an inner oil filter - 2 oil pumps to minimise mixing old oil with new one - 30-l tanks for new / used oil - convenient filling / emptying of oil tanks through their open housing - electronic scales for old / new oil - magnetic oil filter with extended service life - measurements of oil temperature - extended set of connecting adapters - cable compensation (its length) - comfortable, illuminated viewing windows for old / new oil - set of connecting adapters - built-in printer - feature to reach oil operating temperature - built-in vehicle database (quantities, type of ATF oil) - colour 5â&#x20AC;? LCD touch-screen display - capability to edit the database IC index

SPIN 02.023.50

ATF EXTRA

ATF 4000 IC index

ATF 5000 ATF 4000 ATF EXTRA MM TC-200

automatic machine for ATF service

SPIN 02.023.11

Oil pumps 2 2 1 1

Manual/automatic cycle YES/YES YES/YES NO/YES YES/NO

IC index

Electronic scales for old / new oil YES/YES YES/YES YES/YES NO/NO

Tanks capacity for new / old oil 30 lt / 30 lt 30 lt / 30 lt 25 lt / 25 lt 30 lt / 30 lt

ATF TC-200 IC index

007935110000

Bayonet operating Magnetic oil set filter YES YES YES YES NO NO NO NO

Addition of rinsing additive automatic automatic automatic manual

Printer YES YES YES NO

007935016745

Backlight sight-glasses YES YES NO NO

Additional set of connectors YES NO not part of the set none

Built-in database YES NO NO NO

Colour display YES NO NO NO

ACCESSORIES

ATFlush â&#x20AC;&#x201C; rinsing fluid

For automatic gearboxes (500 ml); it can be used for rinsing, among others, the following gearboxes: ZF, CVT, DSG, MULTITRONIC IC index

ER TR1135.M.01

Set of adapters

for American / Japanese cars IC index

SPIN 02.000.62

Set of additional adapters

Popular for ATF 4000 (DSG, AISIN, Volvo V50, Mercedes bayonet kit) IC index

SPIN 02.022.00

The offer also includes individual additional adapters for ATF 4000 for BMW 330, BMW (8-speed gearboxes), Mercedes CLK320, Volvo XC90, Nissan / Renault / Renault < 2003, adapter for Nissan / Jeep / Renault / Mitsubishi and additional kit for ATF 4000/5000 for luxury cars (AUDI A8, Porsche Cayenne, VW Touareg, AUDI Q8).

DIAGNOSTICS AND TESTERS

LAUNCH diagnostic testers X-431 PRO

X-431 PRO3

Technical parameters: Operating system: Android 4.0 8” touch-screen display Processor: 1 GHz Memory card: 512 MB Internal memory: 2 GB Battery 3000 mAh Camera: 2 MP Dimensions: 198x124x10 mm

IC index

Features: X-431 PRO/PRO3 - Wireless communication with its diagnostic connector (DBS Car) up to 25 m - Free upgrades for 12 months - No-forced software upgrades - Set of diagnostic connectors included in the kit - Software for more than 70 car-makes in the Asian, European and US markets - Operation of advanced diagnostic features

Technical parameters: Operating system: Android 4.0 10” touch-screen display Processor: 1.2 GHz Memory card: 1 GB Internal memory: 8 GB Battery 6600 mAh Camera: 3.2 MP Dimensions: 257x175x10 mm

X-431 PRO

IC index

X-431 PRO3

LAUNCH CRP MOT diagnostic tester

SPECIAL OFFER

The CRP MOT unit is the latest diagnostic tester made by LAUNCH with a 7-inch touch-screen display and Android system for prompt service operations for 48 car-makes (Europe + Asia + USA).

NEW

Diagnostic features: Readout of error codes Deletion of error codes Identification of control unit Readout of current parameters Advanced system diagnostics for 48 car-makes Special features for all vehicles: - deletion of oil inspection - operation of the parking brake - resetting of the battery management system - resetting of the steering angle sensor - ventilation of ABS system - support for DPF/FAP - coding of injectors The kit includes: - support for TPMS systems - CRP MOT, protective bag, wireless OBD Module, - adaptation of throttle OBD adapter, power supply unit, Benz-38 connector, BMW-20 connector.

SPIN WS3000 for rinsing cooling systems

It allows rinsing the system and replacing its coolant. Features: - 2 tanks 30 l - 220 V power supply - set of connection adapters included in the kit - 220 V power supply

IC index

SPIN 02.021.03

Fluid for rinsing vehicle cooling systems (1 l)

IC index

ER TR1147.K.P2

ERRECOM URAN

Anti-corrosive lubricant for water pumps in vehicle cooling systems (1 l)

IC index

ER TR1153.K.P2

CRP MOT

Wynn’s FuelSystemSERVE for cleaning PETROL / DIESEL injection systems

It allows for the full cleaning of the whole fuel supply system: its injection pump, valves and injectors. Features: - cleaning without the need to dismantle the fuel system - control of fuel pressure - handy 12 V power supply - a set of adapters for European vehicles (optional - adapters for American vehicles included in the kit - for use in passenger cars and trucks

IC index

ERRECOM ZEUS

IC index

WYNW68432

WYNN’S – INJECTION System Purge For cleaning petrol systems (1 l)

IC index

WYNW76695

WYNN’S Diesel System Purge For cleaning diesel systems (1 l)

IC index

WYNW89195 37

DIAGNOSTICS AND TESTERS

Compression meter for petrol and diesel engines Manometer function. Wireless printer. Adapters in the kit. IC index

HP970 000 00

SPCS-50 SK MASTER

Compression sampler for diesel engines with a set of 15 adapters for the most popular engines. IC index

SPCS-17,5SK MASTER

Compression sampler for petrol engines with a set of adapters for all types of engines. IC index

HP917 300 00

For measuring compression pressure in diesel engines. IC index

HP910 000 00

For measuring compression pressure in petrol engines.

HP908 000 00

It can be used to check the oil pressure sensor. It can be equipped additionally with 914 202 00.

HP914 000 00

HP912 460 00

SPCS-17,5 SK Compression pressure sampler For petrol engines with recording and quick-release couplings.

HP917 000 00

PSC Cylinder tightness sampler For petrol and diesel engines. A basic set of adapters in the kit. IC index

PCO-10c Compression pressure sampler IC index

For the most popular engines – diesel compression – up to 9 spark-plugs, for 6 injectors.

IC index

PCSm-16SK Manometer-based sampler IC index

ADAPTERS – MASTER kit IC index

PCSm-40 Manometer-based sampler

HP912 300 00

HP930 000 00

PCO-10 SK Oil pressure sampler

For engines with quick couplings. 10 adapters, hose (1 m), angle coupling. IC index

HP914 700 00

DIAGNOSTICS AND TESTERS

Oil pressure sampler with a set of connectors Manometer (75 mm) with a cable (1200 mm). Couplings: R1/8”, 1/8”, 1/4”, 3/8”, 1/2”, M10x1, M12x1.5, M14x1.5, M16x1.5, M18x1.5 IC index

0XAT1004

Kit for measuring fuel pressure in injection systems This set of connectors allows diagnosing most injection systems. IC index

For diesel engines: M20, M22, M24 injector adapters included in the kit.

0XAT1317

Pressure tester in the storage case – manometer Multifunctional, professional unit to check the tightness of engine systems. IC index

For popular passenger cars, trucks, tractors and stationary engines. Rubber-shielded manometer. IC index

0XAT2029

0XAT1043

Compression pressure tester

For petrol engines, from 0 to 300 PSI, suitable for 14 mm and 18 mm spark-plugs. IC index

0XAT1049

Compression pressure measuring kit IC index

Oil pressure sampler with a set of connectors

0XAT1097

Complete kit for checking compression pressure Petrol and diesel IC index

0XAT1715

Kit for checking the tightness

of cylinders in diesel engines (passenger cars), with a set of connectors for glow-plugs and injectors. IC index

0XAT1323

SUBJECT TO STOCK AVAILABILITY

Master Alt Alternator Tester Master Alt 2 www.wyposazeniemm.pl

SATISFACTI O

2 YEARS WARRANTY AG

LL NETI MARE

MADE IN ITALY

007935063030

Device for testing new generation alternators. The device can be used to make diagnoses of the charging circuit on vehicles with alternator with charging current supplied by the ECU. The device, by means of specific communication protocols, simulates the command from the system ECU. The device is able perform tests on alternators mounted on the vehicle or on test benches in the workshop. The main manufacturers currently using this type of alternator are: AUDI, BMW, CITROËN, FORD, JAGUAR, LAND-ROVER, MAZDA, MERCEDES, MINI, PEUGEOT, RENAULT, SEAT, SKODA, TOYOTA, VOLVO and VOLKSWAGEN. COMPATIBLE WITH CON TROL STANDA RDS : 1. COM - LIN, BSS(BSD) interface 2. SIG - FORD 3. P-D Mazda 4. L -RVC GM 5. RLO - Toyota 6. Others – programmable PWM generators COMMUNICATION PORTS: RC – COM: PWM output signal connection (green cable). M – DFM: Monitoring input (blue cable). B+: Positive battery in tested circuit, device power supply (red cable). B-: Negative battery in tested circuit, device power supply (black cable).

FUEL INJECTION SYSTEMS

MAGNETI MARELLI TEST TABLES DS1R SERIES Common Rail injector test unit. It is characterised by a very compact construction which will be appreciated by the service staff with their limited-space workshops. Based on the application of the most modern technologies, the technical condition of an individual injector can be checked in a quick and accurate manner. The series is composed of the following versions: DS1R-S/10, DS1R-E/10, DS1R-E/20 and DS1RD/20. The first two basic versions, based on electricity and injector tightness tests, generate results in the form of PASS/FAIL reports and the latter two – detailed reports specifying all measured parameters and their reference to the built-in database. Database for all types of electromagnetic and piezo injectors: Bosch, Delphi, Denso, Siemens / VDO / Continental. Free, automatic software upgrades.

DOSAGE MEASUREMENT

PRESSURE REGULATOR

1000 bar

Manual

1000 bar

yes

Manual

007935101440

2000 bar

yes

Manual

007935101450

2000 bar

yes

Automatic

MODEL

INDEX

MAX. PRESSURE

DS1R-S/10

007935101420

DS1R-E/10

007935101430

DS1R-E/20 DS1R-D/20

DS2R SERIES The unit is able to comprehensively test and clean (thanks to the MACC feature) all types of electromagnetic and piezo injectors: Bosch, Delphi, Denso, Siemens/VDO as well as Common Rail double-cylinder injectors. It can be fitted with SPR and RSP adapters on Common Rail injectors. Moreover, the unit supports EUI (UIPR-A) and HEUI (HUIR-A) attachments, which can be used to test individual pump-injectors and for the use of RSP and BIP adapters. It is manufactured in an automatic (D) or semi-automatic (A) version and makes use of its electronic volumetric measurement module or measuring cylinders to measure the level of fuel injected. The unit – depending on its configuration – is equipped with an injector cleaning facility (MACC) and/or an ultrasonic cleaner. 1850 or 2500 bar is its maximum operating pressure. Operation via its touchscreen, Androidbased software.

DS2R MODEL

MEASURING SYSTEM

MAX. WORKING PRESSURE

INJECTOR CLEANER (MACC)

ULTRASONIC WASHER

IC INDEX

DS2R-A/10

BURETTES

1000 bar

007935100830

DS2R-A/10/F

BURETTES

1000 bar

YES

007935100840

DS2R-A/20

BURETTES

2000 bar

007935100850

DS2R-A/20/F

BURETTES

2000 bar

YES

007935100860

FUEL INJECTION SYSTEMS

CRU SERIES

Encoding of DENSO injectors

The unit can automatically and comprehensively test and clean (via the MACC feature) all types of electromagnetic and piezo injectors: Bosch, Delphi, Denso, Siemens/VDO as well as Common Rail doublecylinder injectors. 1 (CRU2R) or up to 4 injectors (CRU4R) can be operated. The unit – depending on its configuration – is equipped with an injector cleaning facility – MACC (CRU2R only) and/or ultrasonic cleaner. It can be fitted with SPR and RSP adapters on Common Rail injectors. Moreover, the unit supports EUI (UIPR-A) and HEUI (HU-IR-A) attachments, which can be used to test individual pump-injectors and allow for the use of RSP and BIP adapters. The unit makes use of dynamic mass measurement procedures and can be used to specify injector codes (when fitted with an RSP sensor). 1850 or 2450 bar is its maximum operating pressure. Operation via its touchscreen, Androidbased software.

NEW

- extra charge IC index

007935101660

CR MODEL

NUMBER OF SUPPORTED INJECTORS

MAX. WORKING PRESSURE

CRU2R/20

CRU2R/21

CRU2R/30

INJECTOR CLEANER (MACC)

IC INDEX

2000 bar

007935100790

2000 bar

YES

007935100800

2450 bar

007935100810

CRU2R/31

2450 bar

YES

007935100820

CRU4R/20

2000 bar

007935100770

CRU4R/30

2450 bar

007935100780

Accessories for Magneti Marelli tables Adapters for CRIN injectors (truck) IC INDEX

DESCRIPTION

007935095020

Adapter for injectors: Crin-Iveco/Cummins 1/Dodge/Duramax (Bosch 120-184/ 018/ 114/ 032/007/ 161)

007935095030

Adapter for injectors: Crin-Iveco/Cummins 2 (Bosch 120 – 125/070)

007935095035

Adapter for injectors: CRIN MAN (YAMZ); KHD/RENAULT DEUTZ (BOSCH); RENAULT/FENDT DEUTZ (Bosch 120 ‐ 065)

007935095040

Adapter for injectors: Crin-Man Injector No. (0445120044, 0445120053, 0445120045)

007935095045

Adapter for injectors: CRIN-MAN 2 MAN ; IH (INTERNATIONAL HARVESTER); NAV-INTL (MWM) Injector No. 0445120030, 0445120218, 0445120100)

007935095050

Adapter for injectors: Crin Renault (Bosch 120-003)

007935095400

Adapter for injectors: Crin-Cummins (Bosch 120-003)

007935095410

Adapter for injectors: Crin-Duramax( Denso 5730)

007935095420

Adapter for injectors: Crin-John Deere( Denso 0540)

007935095430

Adapter for injectors: Crin-Bosch Mtu (Bosch 920189903(3894783,Y431K05210)

007935095520

Adapter for injectors: Crin-Ford 6.4 Powerstroke(Siemens 8C3Z‐9E527‐A)

007935095530

Adapter for injectors: Crin-Denso (0800 05C0064)

007935095540

Adapter for injectors: Crin-L`Orange(L’Oranz 934759 (Vtog266W48B)

007935095550

Adapter for injectors: Crin-Iveco (Bosch 120-054)

007935095560

Adapter for injectors: Crin-Iveco (Bosch 120-157)

007935095980

Adapter for injectors: Khd/Deutz(Bosch)(Bosch 120‐067)

007935100100

Adapter for injectors: Crin (with 007935095330,007935095340,007935095350)

007935100110

Adapter for injectors: Bosch Crin 4.2 0445120207/194

CONTI/VDO/BOSCH PIEZOELECTRIC FLOW KIT This is a set of pressure throttles for flow fuel to be used for testing Conti/VDO and Bosch piezoelectric injectors. IC index

007935095480

RSP 7-9 MM SWING PIN LIFT DELAY SENSOR This RSP sensor allows precisely measuring the reaction (delay) times of an individual injector needle when an electrical signal is applied to its coil. Thanks to the adapter it is possible to detect the injector's slow operation, an excessive delay of factual injection and low general performance. IC index

007935100670

CONTAINER USED TO STORE INJECTORS IC index

007950010240

FUEL INJECTION SYSTEMS

MARELLI TCCM-R CONTROL MODULE This TCCM-R control module, thanks to its advanced and constantlydeveloping database, enables to control a wide range of units used to test injectors, pump-injectors and high-pressure fuel pumps. The unit can be configured with any conventional test table available on the market, regardless of its advancement or origin. The TCCM-R module can also be used as a basic simulator for petrol or diesel injectors. It can be configured for 1 (TCCMR-1) or 4 injectors (TCCMR-4).

MODEL

DESCRIPTION

IC INDEX

TCCMR-1

CONTROL AND TESTING MODULE injectors (1 injector) complete test database, support for all types and brands of injectors (optional RSP)

007950030815

TCCMR-4

CONTROL AND TESTING MODULE injectors (4 injectors) complete test database, support for all types and brands of injectors (optional RSP)

007935101070

ADDITIONAL OPTIONS / EXTENSIONS .../CRP

Kit for TCCMR – for control of Common Rail pumps

007935101080

.../CB

Kit for TCCMR – for control of CAMBOX (optional RSP, with no CAMBOX)

007935101090

.../SIM

Kit for TCCMR – for control of injectors

007935101100

...4/BK

Kit for TCCMR-4 – for dynamic measurement of injection (RSP required for the coding feature)

007935101120

….1/DF6.5

Kit for TCCMR-1 – for static measurement of injection (no coding feature) – not for ... / CRP

007935101130

…1/DF150

Kit for TCCMR-1 – for static measurement of injection (no coding feature) – not for ... / CRP

007935101140

TBCR KIT

Fuel rail with the basic equipment for testing Common Rail injectors (optional: adapters, mountings, RSP)

007935101150

CAMBOX

Cambox attachment used to operate pump-injectors with Volvo and Iveco adapters (other adapters as an option)

007935100350

DELPHI YDT35B This unit is an excellent solution for workshops which do not specialise in advanced repairs of diesel systems and makes excellent grounds for running diagnostics of injectors. In less than five minutes and through seven simple steps, it detects whether an individual injector can reach its basic mechanical and electrical parameters. Basic features: It is compatible with all Common Rail injectors made by the largest automobile manufacturers of: electromagnetic injectors: Delphi, Denso and Bosch, piezoelectrical injectors: Denso, Bosch and Continental, adapters: Bosch CRIN and Denso Heavy Duty adapters (optional). Testing of electrical parameters of injectors on their resistance, inductance, capacitance. In case of an electrical fault, a given injector is not subject to repair or regeneration. Visual testing of fuel spray. Measurement of return flows. IC index

YDT35B

SPECIAL OFFER

COMMON RAIL INJECTION TESTER + STORAGE CASE WITH SONIC 706001 TOOLS IC index

YDT35B/SONIC

* This special offer is subject to stock availability.

FUEL INJECTION SYSTEMS

EPS 118

This is the latest-version sampler for Common Rail, electromagnetic CRI, CRIN and piezoelectric CRI injectors. The unit is specially designed to be used in independent workshops (not only in specialised Diesel Service Centres) which wish to run a simple check on injectors and their operation in the check&change mode. Thus, it is easy to assess the correct operation and usefulness of any fuel injector. This unit in its basic version is suitable for testing electromagnetic and piezoelectric injectors made by Bosch used in passenger cars, vans and trucks. Key features: – Precise and fully automatic testing of injectors – Simple and quick mounting of injectors – Intuitive user interface (touch screen) – Wide coverage of injectors (including: Bosch, Continental, Siemens, Delphi, Denso) – Database with control values (Bosch and other manufacturers) – Additional information on injectors – Control pressure up to 1800 bar – Adaptation to the WLAN network – Presentation of spray shaping at all pressures – Presentation of test results which are easily understood by the workshop and the customer – Printout of reports, if required – Small-sized table sampler (60 x 60 cm) IC index

0 683 803 119

RETROFITTING EQUIPMENT FOR EPS118

IC INDEX

Additional kit for CR injectors made by other manufacturers, passenger injectors (Denso, Delphi, Siemens, VDO and Conti)

1 687 010 518

Return line for CR injectors, trucks (Bosch)

1 687 016 038

COMPARISON OF EPS 205 WITH EPS 118 Operating system (installed)

EPS 205

EPS 118

Windows XP

Android

Warranty consideration for conventional injectors

YES

Test values, installed

YES

CRI / CRIN test times

~ 7 min

~ 22 min

Spray shaping images

YES

IMA coding

Electrical measurements

YES

Electrical measurements

FUEL INJECTION SYSTEMS

EPS 205

Test stand to test conventional Common Rail injectors Safe and easy testing of Diesel components: Injectors CRI Piezo made by Bosch, Denso, Siemens, Continental Solenoid valves CRI made by Bosch Solenoid valves CRIN made by Bosch Solenoid valves CRI made by most manufacturers Terminals for conventional injectors and pump injectors Conventional injectors Higher efficiency as a result of: Adaptation of injection chamber and mountings for all injectors Simple and easy installation of injector at its holder Simplified operation of injector due to its expanded protective cover CRIN installation by means of special adapters (identical to the ones applied with the CRI/CRIN 848 H unit at the EPS tables) Testing of injectors in operation at a pressure above 1800 bar (reduced measurement steps) Accurate measurement technology Efficient testing of Common Rail injectors Testing based on injection dosage measurement (taking CRI Piezo as an example): Tightness test Dosage start test (no flow pressure), Recognition of ISA codes Full load dosage (VL) Pilot dosage (VE) Idling dosage (LL) Emission dosage (partial load) – Resistance measurement of Piezo elements (EM) Pump-injectors and conventional injectors Internal and external tightness test Socket / spray tightness test Electronic croaking test (analysis of pressure pulsation) Injection opening pressure test Fuel spray shaping In case of pump-injectors, we check their lower part attached to their special adapter. CRI/CRIN upgrades are available on the "TestData" CD. Control data for Bosch components on the "TestData" CD is delivered in the kit. Control data for diesel components made by other manufacturers is provided by Refdat and can be downloaded from www.refdat.net IC index

0 683 803 205

RETROFITTING KIT

INDEX

APPLICATION APPLICATION IN CRI IN CRIN (TRUCK)

CRI-MV Delphi/Denso test retrofitting kit, also (3 Ohm) replaces the 1 687 001 969 retrofitting kit

1 687 010 399

YES

CRI-Piezo Conti (Siemens)/Denso test retrofitting kit

1 687 010 400

YES

CRI Piezo-Bosch testing kit

1 687 010 393

YES

Adapter – A1i (1 pc.)

1 685 720 297

YES

Adapter – A2i (1 pc.)

1 685 720 314

YES

Adapter – A3e (1 pc.)

1 685 720 344

YES

Adapter – A3i (1 pc.)

1 685 720 296

YES

Adapter – A4i (1 pc.)

1 685 720 316

YES

Adapter – A5i (1 pc.)

1 685 720 300

YES

Adapter – A6i (1 pc.)

1 685 720 318

YES

Adapter – A14i (1 pc.)

1 685 720 334

YES

Adapter – A13i (1 pc.)

1 685 720 332

YES

Connecting fitting for single adapters (order 6 pcs.)

1 683 386 166

YES

O-ring for connection fitting (order 6 pcs.)

1 680 210 143

YES

Connecting fitting for single adapters (order 6 pcs.)

1 683 386 166

YES

Bosch, caring for their loyal users of the EPS200/A tester, has developed retrofitting kits which allow adjusting it to the EPS 205 version KITS TO RETROFIT THE EPS 200/A UNIT FOR THE EPS 205 VERSION

PART NO.

TESTED COMPONENTS

Basic set for rebuilding the EPS200/A unit

1 687 010 397

All injectors. Required for Piezo

Bosch CRI Piezo

1 687 010 393

Bosch CRI Piezo

Set for CRIN – New mounting system

1 687 010 398

Bosch CRIN

FUEL INJECTION SYSTEMS

EPS 708 test table: For pumps and injectors (CR) The EPS 708 test table made by Bosch which was designed specifically for high-pressure pumps and Common-Rail injectors, allows testing pressure up to 2200 bar. Its newly-constructed tank (rail) is adapted for 2500 bar pressure, which also guarantees its adaptation for future diesel solutions.

Precision and comfort: Electronic dosage measurement for cost-effective tests on Common Rail components Electronic inlet control for the pump and provision of lubricating oil Easy installation of the pump with no need to slide its clutch cover Environmental friendliness: Integrated cooling system reduces water consumption at the workshop (water cooling available as an option) Safety: When its cover is opened, it immediately leads to engine stoppage The cover protects its operator against any accidentally-loosened parts or fuel under pressure due to cable damage Efficiency: Electronic inspection and scheduling of periodic inspections (e.g. change of testing oil) Self-diagnosis system informs when oil should be changed The kit includes: Table, monitor, mouse, computer, power supply cable, hydraulic hoses, software package, protective cover, pressure reservoir 2500 bar IC index

0 683 708 001

As a result of a wide range of additional equipment and accessories, each and every price is determined individually with the customer. Ask your Inter Cars representative for more details.

MTBR SERIES

This test stand allows for the comprehensive servicing of all injection systems used in modern diesel engines. If required, it is possible to test CRDi injectors, CRp pumps, EUI/EUP and HEUI injectors of all types and manufacturers.

MTBR/S

This compact stand is used to test components of diesel engine injection systems. It supports all types and models of CRp pumps. Its maximum operating pressure may reach up to 2000 bar. Electronic static mass measurement. Extension with HEUI/EUI/ EUP service and measurement features, if required. System with one testing slot. IC index

007935101480

MTBR/E

This compact stand is used to test components of diesel engine injection systems. If required, it can be equipped with facilities to service all types and models of CRp pumps, CRDi injectors as well as EUI/ EUP and HEUI pump injectors (upon being equipped with Cambox). Its maximum operating pressure may reach up to 2800 bar. Electronic dynamic mass measurement and electronic static mass measurement. Injector coding feature (upon being equipped with the RSP sensor). System with four testing slots. IC index

007935101490

FUEL INJECTION SYSTEMS

CRITS/Master Testing unit for injector diagnostics Features: Control of min. injector opening pressure Control of min. injector opening time Measurement of injector output: – pilot dosage (VE) – idling dosage (LL) – emission dosage (EM) – full load dosage (VL) Conduct of tests on BOSCH, DELPHI, SIEMENS-VDO, DENSO injectors, if required Control of injector response timing Monitoring in case there is no injection Coil diagnostics (current diagram) Generation of C2i codes for Delphi injectors (as an option) Generation of Bosch IMA codes (as an option) Complete or partial parameter reporting Guidance on faulty injector components Largest database available on the market

IC index

Technical specification: CRITS EVO version adapted for injectors above 2000 bar (for injectors 0 445 117 XXX, type CRI3-20) Fast mounting (1 min/injector), ergonomics, durability and simplicity Resistance of fuel rail up to 2000 bar Adjustment of working pressure up to 1850 bar Electronic flow meter in mg/injection and mm3/injection Measurement accuracy at 0.1% Simple interactive menu Multilingual menu Selection of measurement mode: automatic / semi-automatic / manual / mixed Printout of labels with Delphi codes (optional) Printout of test reports Filtration accuracy up to 3 μm Standard equipment: – cable bundles: BOSCH/DELPHI/VDO-SIEMENS/DENSO – 12x1.5 mm flexible cable – 14x1.5 mm flexible cable – return cable adapters – PIEZO BOSCH return valve (throttle)

COMPARISON: CRITS VS MASTER

CRITS EVO

CRITS KD 0005060

KD 0005060/EVO

Master IC index

KD 0005064

CRITS

MASTER

Number of injectors

Touch screen

15”

8,4”

Capacity of test fluid

30 l

20 l

Cooling system

thermodynamic (coolant circulation)

cooler + fan

Power supply

380 V, 32A (three-phase current)

High-pressure pump

CP3

Printer for A4 reports

YES

Operating system

Windows 10

Bosch coding (IMA)

Option (IC index: KD 0003438)

Delphi C2i coding + printer

Option (IC index: KD 000506499)

Option (IC index: KD 000506095)

DESCRIPTION – APPLICATION

IC index

OPTIONAL EQUIPMENT – ADAPTERS FOR CRIN INJECTORS FOR CRTIS (4 PCS.)

OPTIONAL EQUIPMENT – ADAPTERS FOR CRIN INJECTORS FOR MASTER (1 PCS.)

IC INDEX

RENAULT MACK 24 mm

KD 000506705

KD 000506450

ACTROS 26 mm

KD 000506710

KD 000506455

MAN 29 mm

KD 000506715

KD 000506460

RENAULT MACK CV 480 27.5 mm

KD 000506720

KD 000506465

RENAULT PREMIUM 420 CV 32 mm

KD 000506725

KD 000506470

FIAT TECTOR 26.5 mm

KD 000506730

KD 000506475

DENSO 27 mm

KD 000506735

KD 000506480

DENSO 23.5 mm

KD 000506740

KD 000506485

MAN 26 mm

KD 000506745

KD 000506490

VOLVO-DEUTZ 28 mm

KD 000506750

KD 000506495

FUEL INJECTION SYSTEMS

DieselCube test table

This table should be attached to your own PC. If required, it can test injectors made by BOSCH, DELPHI, DENSO, SIEMENS. Performance of tests: Pilot (VE) Idling (LL) Emission (EM) Full load (VL) Electric coil test Final or mid-report Corrective guidelines when a given test fails Largest database on the market Fast grip: ergonomic, robust and simple Protective cover made of plexiglass Working pressure adjustable up to 1850 bar Interactive user-friendly menu Multilingual menu Tank capacity 10 l Pressure generated by CP3 pump Printout of reports with reference values Integrated cooling system Immediate engine shutdown when the cover is open 5 kW power IC index

KD 0005088

The kit includes: 000506410 Electric cable – BOSCH 000506411 Electric cable – DELPHI 000506412 Electric cable – DENSO 000506413 Electric cable – SIEMENS/MERCEDES 000506419 Electric cable – BOSCH PIEZO 000508821 Electric cable – HP 12x1.5 mm 000508822 Electric cable – HP 14x1.5 mm 000506052 Flow cable for PIEZO BOSCH, Flow connectors for: BOSCH – DELPHI – DENSO – SIEMENS

PumpMaster table for testing Common Rail pumps

This unit is designed for testing small and medium-sized Common Rail pumps. It allows testing all brands of pumps made by Bosch, Delphi, Denso and Siemens/VDO. Ergonomic fast and simple mounting system Touch screen interface It is equipped with a flow meter and cooling system 12.5 HP engine 9.2Kw with variable speed from 50–3500 rpm Safety shield made of plexiglass Tank (20 l) Power supply system from 0 to 20 bar 3μ filtration system with 4 filters Working pressure up to 1800 bar Fully-automated test cycle on 10 minutes Testing of pump valves: SCV, IMV for PCV'S, DRV'S, ZME'S, EAV'S Return flow measurement Return flow temperature flow within 0–100° Testing of pump at various test points, e.g. under full, partial and low load Quiet operation Testing plan Quiet operation STANDARD ACCESSORIES Pump – Bosch CP1 0445020002 Mounting brackets – 00036105101 + 0008245 Pump – Bosch CP3 0445010699 Mounting brackets – 00036105001 + 0008245 Pump – Denso HP3 22100-0G010 Mounting brackets – 00036105101 + 00036105201 + 0008245 Pump – Delphi R9044Z013A Mounting brackets – 00036105301 + 0008245 Pump – Delphi 9421A000A Mounting brackets – 00036105101 + 0008245 Pump – Siemens PSA 5W540018 Mounting brackets – 00036105401 + 0008015 IC index

KD 0003610

OPTIONS Pump – Bosch CP1 0445010030 Mounting brackets + 00036105101 0008110/0008111/0008112 Pump – Bosch CP4 S1 / S2 0445010507 – 0445010614 Mounting brackets – 00036105501 + 00036105502 Pump – Bosch CP3 0445010075 Mounting brackets – 00036105601 + 0008258 Pump – Continental 04L1307558 – 03L130755AL Mounting brackets – 00036105701 + 0008017 Pump – Delphi 28334239 Mounting brackets – 00036105701 + 0008017 Pump – Delphi 28265176 Mounting brackets – 00036105701 + 0008015

FUEL INJECTION SYSTEMS

Revenol fluid/oil for calibration of test tables It meets the following norms: Bosch VS 15665-OL-CV, ISO 4113-CV-AW, MAN, Volkswagen, anti-corrosion oil used for the internal maintenance of fuel systems: MTU, Lucas CAV, MB DBL 6513 IC index

CALIBRATION FLUID CR 20L

MAGNETI MARELLI CAMBOX

The Cambox unit can be easily and quickly added to all kinds of test tables in order to test all types of injector pumps (EUIs) and pumping units (EUPs). Our device is universal, which means that it can be mounted on any type of test table (Bosch, Hartridge, Rabotti, Magasa, Chinese and other products). Its height from the base to the drive shaft axis is the same as the one made by BOSCH – 125mm. The Cambox unit consists of the following elements: 1) the mechanical part called the Cambox (MM00793535100350) is a mechanical base to be mounted on its guideway. Special adapters are connected to it to suit any type of injector pump. In standard configuration (completed at the factory) the unit allows conducting mechanical tests on Volvo and one version of Iveco. 2) the electronic part, TCCMR controller (MM00795003030815) + */CB extension (MM007935101090) – this an electronic device which allows stimulating any tested injector coils. The unit has an integrated database for pump injectors where you can compare all measurement results. Touch screen control. Software upgrades over the web. Printout of test reports, if required 3) adapters for various types of pump-injectors IC index

KD 007935100350

Cambox for diagnostics of UIS / PLD pump-injectors

DESCRIPTION Adapter for Cambox (007935100350) Scania

007950030515

Adapter for Cambox (007935100350) Detroit

007950030520

Adapter for Cambox (007935100350)-Cummins

007950030525

Adapter for Cambox (007935100350) Actros Mercedes

007950030530

Adapter for Cambox (007935100350) Mb-Atego

007950030535

Adapter for Cambox( 007935100350) Daf

007950030540

Adapter for Cambox (007935100350) Caterpillar L 10

007950030555

Adapter for Cambox (007935100350) Caterpill L 15

007950030560

Adapter for Cambox (007935100350) 500Hp Delphi

007950030565

Adapter for Cambox (007935100350) John Deere Delp

007950030570

Adapter for Cambox (007935100350) Iveco Cursor

007950030575

Adapter for Cambox (007935100350) Land Rover

007950030580

Adapter for Cambox (007935100350) Volkswagen (includes 2 adapters: coil+piezo)

007950030585

Special Pusher for use with 007950030580; 007950030575; 007950030570

007935100410

BIP adapter (3 adapters (VW, EUI Bosch, Delphi) included in the kit)

IC INDEX

It enables diagnosing UIS PLD pump-injectors, it can be used to measure the factual start of pumping (BIP) and is adapted to be mounted on Bosch test tables (and can be adapted for other types of tables). The unit should be supplemented with the appropriate equipment (simulator and adapters). IC index

INDEX 007950030510

KD 0003587

INDEX

DESCRIPTION

KD 000231620

Simulator for UIS-PLD-EUP-EMD including PC SOFTWARE

KD 000231635

Simulator for UIS-PLD-EUP-EMD+BIP+L'ORANGE +HEUI including PC SOFTWARE

KD 000231640

Simulator for UIS-PLD-EUP-EMD+DELPHI E3 (TWO COILS) +BIP excluding SOFTWARE

APPLICATION

KD 0002429

EUP DELPHI

KD 0002361

INJECTOR SIEMENS FOR AUDI/VOLKSWAGEN

KD 0002370

VOLKSWAGEN – AUDI PDE80 UNIT INJECTOR

KD 0002371

LAND ROVER DISCOVERY-DELPHI UNIT INJECTOR BEBE2A00001

KD 0002372

IVECO CURSOR 430 -PDE100 INJECTOR

KD 0002373

CATERPILLAR 3176-3196-C12-C10 UNIT INJECTOR

KD 0002374

VOLVO 420-460 -DELPHI UNIT INJECTOR- BOSCH

KD 0002375

IVECO CURSOR 350 UNIT INJ

KD 0002377

CATERPILLAR C13 UNIT INJECTOR

KD 0002378

MERCEDES ATEGO UNIT PLD100

KD 0002379

MERCEDES ACTROS PDL110 UNIT PUMP

KD 0002380

CUMMINS CELECT IMS-L10-M11-N14 UNIT INJECTOR

KD 0002381

MACK-RENAULT-DAF-KHD PLD100-110 TYPE B UNIT INJECTOR

KD 0002382

DETROIT DIESEL 50-60 UNIT INJECTOR

KD 0002386

SCANIA PDE100S 2006

KD 0002390

INJECTORE AUDI – VOLKSWAGEN PDE 80.2 (new)

KD 0002391

M11 CUMMINS 3411754

KD 0002392

IVECO STRALIS 500 HP EURO 5

KD 0002393

DETROIT DIESEL 60 5235580

KD 0002396

CATERPILLAR MECHANIC SERIES 3500 – 4P9076 UNIT INJECTOR

KD 0002397

CATERPILLAR 3500 ELECTRONIC UNIT INJECTOR

KD 0002405

DETROIT 5234366 UNIT INJECTOR

KD 0003014

DEUTZ-CULLIMAN-SAME 101

KD 0003016

DELPHI KCCOT120A0020 FOR PERKINS

KD 0003017

CATERPILLAR MECHANIC 1.1 – 3126

KD 0003018

NISSAN 440

KD 0003942

DETROIT SERIES DDEC V – 0414703003/5

FUEL INJECTION SYSTEMS

Repair tool kit for BOSCH UIS/EUI, PLD/EUP pump-injectors Features: The toolkit is used to regenerate control valves for pump-injectors for truck engines fitted with Bosch UIS/EUI and PLD/EUP systems. The kit contents: – 2 sanding pads with 600 and 1000 grain thickness – end-mill for honing valve holes – end-mill for honing valve seats – end-mill for polishing valve seats – brush for valve holes – 2 dial sensors for measuring valve strokes and air gap – set of non-standard valves (30 pcs.) – set of non-standard nuts (60 pcs.)

Repair toolkit for passenger vehicle UIP – level 3 IC index

IC index

0 986 610 825

KD 0005150

Marelli Magneti repair toolkit for CR injectors made by: Bosch / Denso / VDO (Siemens) The unit is fitted with a touch-screen computer and allows for the micro-meter control of calibration with an accuracy of 0.001 mm. All measurements conducted with the use of sensors under the repair procedure are automatically sent to the computer which analyses them and adjusts the thickness of adjusting elements (washers). This system is equipped with a comprehensive measurement database for injectors. Depending on the version, the kit conducts measurements for: Bosch (ball strokes, air gap, volume of control chamber, spring tension), – VDO/Siemens (piezoelectric), it is possible to measure all control elements which influence the operation of the injector, both in its upper and lower parts –Denso, it is possible to measure electromagnet coil and its washers. MAGNETI MARELLI SPECIALIST TOOLS

IC INDEX

3-level service and repair kit – Bosch

007950011600

3-level service and repair kit – Bosch + Denso

007941000203

3-level service and repair kit – Denso

007941000204

3-level service and repair kit – VDO/Siemens

007941000205

THE COMPANY, WITH A VIEW TO THE 7950011600 (BOSCH) KIT OWNERS, ALLOWS IT BEING EXPANDED IN THE FOLLOWING WAY: 3-level service and repair kit – extension for Denso

007941000206

3-level service and repair kit – extension for VDO

007941000207

Toolkit for full-range injector repairs

Applicable to Bosch Common-Rail injectors, used in passenger cars (CRI) and trucks (CRIN). INDEX 0 986 610 750 1 687 022 873 0 986 613 650 0 986 611 249 0 986 611 275 1 684 430 065 1 684 430 067 1 684 430 068 0 986 613 600

INDEX

REPAIR TOOLKIT FOR CRI INJECTORS (PERSONAL VEHICLES 0 445 110 XXX) AMOUNT NAME 1 Repair toolkit for CRI injectors – Level 3 (supplementary kit) 1 Power supply unit 1 Storage case and tools for CRI injectors 1 Main rotary vice, special edition: KDEP 2919/1 1 KDEP 2921 adapter, 1/2" bi-directional adapter-converter 2 Oscilloscope measuring cable – red 2 Oscilloscope measuring cable – yellow 2 Oscilloscope measuring cable – black and a clip 1 Vice plate for the electromagnetic unit (called 600)

EXTENSION FOR CRIN INJECTORS (TRUCKS: 0 445 120 XXX) AMOUNT NAME

0 986 610 725 0 986 613 699 0 986 612 930

1 1 1

INDEX F00ZC99170 F00ZC99171 F00ZC99172 F00ZC99173 F00ZC99174 F00ZC99175 F00ZC99176 F00ZC99177 F00ZC99178 F00RJ02759 F00RJ02757 F00RJ02758 F00RJ02755 F00RJ02756 F00RJ03110

APPLICATION CRI / CRIN CRI / CRIN CRI / CRIN CRI CRI CRI CRI CRI CRI CRIN CRIN CRIN CRIN CRIN JAPAN CRIN

Additional set for CRIN (level 3) Toolkit for CRIN – storage case supplement Mounting sleeves for CRIN – MAN o-rings ADJUSTABLE PADS NAME Set of pads – level: A Set of pads – level: B Set of pads – level: C Set of pads – level: D Set of pads – level: E Set of pads – level: F Set of pads – level: G Set of pads – level: H Set of pads – level: J Set of pads – level: K Set of pads – level: L Set of pads – level: M Set of pads – level: N Set of pads – level: P Set of pads – level: Q

FUEL INJECTION SYSTEMS

EMS 7 Robotised injector measurement system (CR EMS 7). This system is suitable for all injectors made by Bosch, Delphi, Denso, Siemens/VDO. Measurement time of all dimensions – approx. 3-4 min. Measurement tolerance – 0.002 mm. It can be operated in automatic or manual mode (joystick control). Its standard equipment – apart from the software – also includes CRI and CRIN (BOSCH) kits. OPTIONS: Complete kit for Delphi injectors – KD 000371582 Complete kit for DENSO injectors – KD 000371584 Complete kit for SIEMENS injectors – KD 000371586 IC index

KD 0003715

EMS 1 Semi-automatic injector system (CR EMS 1). This system is suitable for all injectors made by Bosch, Delphi, Denso, Siemens/VDO. Measurement tolerance – 0.002 mm. Automatic readout. Manual positioning (in line with the instructions in the program). Its standard equipment – apart from the software – also includes CRI and CRIN (BOSCH) kits. OPTIONS: Complete kit for Delphi injectors – KD 000371582 Complete kit for DENSO injectors – KD 000371584 Complete kit for SIEMENS injectors – KD 000371586 IC index

KD 0003712

FUEL INJECTION SYSTEMS

Ball-seat grinder

Valve movement tester (3 level)

This grinder is used to polish ball seats in order to reach tightness; the kit also includes a set of diamond papers.

This unit allows checking the actual stroke of injector valve; it can also be used for CRI 2.1 injectors with no spring under their valve plate. IC index

KD 0005066

IC index

Vice for disassembly / assembly

Valve-body grinder

This vice with its durable construction allows for the proper disassembly and assembly of injectors, not only Bosch injectors. IC index

This grinder is used to remove dirt from the valve body in order to ensure its tightness upon embedding in a Teflon ring; the kit also contains a set of abrasive papers.

KD 0003235

IC index

KD 0005076

Measuring kit

Valve tightness tester

This kit is used to perform control measurements at individual stages of injector reconditioning. When purchasing the complete Bosch injector reconditioning kit, a set of control data is included.

For Bosch injectors, it allows checking their tightness at a pressure of 300 bar. The unit should be completed with a pressure-generating pump, e.g. 30 000 308 made by Monark. IC index

KD 0005075

IC index

KD 0005070

KD 0005065

Ball-seat tightness tester

This tester s checking ball-seats and their tightness. The unit should be supplied with compressed air with a min. pressure at 6 bar. IC index

KD 0005073

Repair toolkit

NEW

For Common Rail – Denso injectors. The kit includes spanners for disassembly / assembly of Denso electromagnetic injectors, three calibration dials and vice jaws. IC index

KD 0003309

For injector nuts: 20 mm

KD 0004056

16 mm

KD 0005083

For CRI injectors. IC index

Single spanners

IC index

Disassembly / assembly toolkit

For CRIN injectors.

IC index

For CRI 2.1 Bosch injector coils.

KD 0005140

Disassembly / assembly toolkit IC index

Mechanical press

Set of 4 spanners for injector nuts (14–15–17–19 mm / 27 mm). These spanners are used to demount and mount injector nozzle nuts.

15 mm IC index

KD 0003236

KD 0004092

IC index

KD 0004047

17.5 mm

KD 0004057

IC index

KD 0004099

FUEL INJECTION SYSTEMS

Instrument for measuring control pins IC index

KD 0005079

Pre-filter change unit for CR DENSO IC index

0005078

(angle + torque + PC connection) IC index

KD 0004067

KD 0003643

2 PWM-signal emulator with the high-pressure measurement feature IC index

Spanner for DENSO injectors IC index

Electronic torque wrench

KD 0002440

Universal press-vice

for injectors and pump-injectors IC index

KD 0003641

PT5 Smart tester

Measurement of inductance, resistance, capacitance, insulation at 300V. Suitable for electromagnetic and piezo injectors as well as for pumps. Positive / negative results. It includes 6 measuring cables. IC index

KD 0002550

FUEL INJECTION SYSTEMS

Special vice used to dismantle Common-Rail injectors

Running-in kit for injector ball-seats IC index

This special vice allows unscrewing spray caps as recommended by the injector manufacturers, it is supplied with a set of angular discs and bushings needed to re-mount an injector. IC index

007950010630

Test socket for vacuum-testing of socket seat surfaces IC index

007950010340

007950010220

Tester for injector activation

007950010210

Complete repair kit for CRI injectors IC index

APPLICATION: – Activation of injector in order to measure ball strokes – Measure of individual injector in terms of its resistance CONTENTS: • tester on the control unit • 1 power cable • 1 basic cable • 4 connection cables (Bosch CRI, Bosch CRIN, Denso, Delphi) IC index

Complete repair kit for CRI + CRIN injectors IC index

Complete repair kit for CRIN injectors IC index

007950010100

007950010230

Tripod to measure ball strokes

The kit contains: injector tripod + 2 bushings for mounting of CR injectors + electronic sensor. IC index

007950010310

007950010740

FUEL INJECTION SYSTEMS

EPS 100 injector sampler

Range: 0â&#x20AC;&#x201C;400 bar Compliant with the ISO standard Suitable for 3- and 4-hoarseness-group injectors IC index

0 684 200 704

BOSCH EPS 738 Fuel vapour absorber for injector sampler

Direct extraction of oil mist when under the injector under testing. Power supply: 230 V / 50 Hz IC index

for CRI teflon o-ring

007950011450

Anti-magnetic forceps IC index

Range: 0â&#x20AC;&#x201C;400 bar. IC index

0 681 200 502

A tool

for venting the amplifier inside CR Bosch Piezo injectors Indeks IC

NEW

007950030980

0 684 200 702

Positioner IC index

EFEP injector sampler 60 H Bosch

007950010150

Universal gripper IC index

007950010750

Tool for CR shackle and casing

Set of tools for disassembling and assembling the ring protecting shackle or casing of CR injector

NEW

1. Tool for disassembling 2. Tool for assembling Indeks IC

Cap

with 3 pins for DENSO internal valves IC index

007950010840

0 986 610 600

Cap

for removing inner nuts IC index

007950010800

FUEL INJECTION SYSTEMS

Injector sampler

PIEZO injector venting unit

Range: 0–600 bar IC index

0XAT1603

Equipment used to repair injectors

It requires applying any test table (e.g. EPS, KDiesel, DS2X, CRU). IC index

For Siemens VDO Common Rail injectors. IC index

0005089

KD 0005160

Dedicated stands for diesel workshops Table top – stainless steel Table top – stainless steel with no lighting (with a lighting frame) IC index

EVDIESEL-N

IC index

Table top – galvanised steel with no lighting (with a lighting frame) IC index

with lighting

EVDIESEL-O

EVDIESEL-N+LIGHT

Table top – galvanised steel with lighting IC index

EVDIESEL-O+LIGHT

Accessories for dedicated stands for diesel workshops: Monitor support

Shelf

secured with ribbed rubber IC index

IC index

EV600654

Computer support

Monitor and keyboard support IC index

IC index

EV600657

EV600656

Universal support IC index

EV600655

Terminal block 2x230V+1x air

EV600659

IC index

EV600630

Check kit for Common Rail injectors on return Couplings for Bosch, Delphi, Denso, Siemens piezo-injectors available as an option

IC index

0 986 612 950

IC index

SEA VS2046

IC index

OXAT1392A

FUEL INJECTION SYSTEMS

Check-kit for Common Rail injectors on return With 24 adapters in the kit

IC index

OXAT1428A

With 24 adapters in the kit

SEA VS2048

IC index

Imitation IMV valve kit

The kit includes imitation control valves for high-pressure fuel pump, so it is possible to replace a dosing valve and stimulate its maximum opening and thus force this pump to generate maximum pressure. If – upon using such an imitation dosing valve the re-measured pressure does not show any increase in – pressure generated by this pump, this may indicate that this pump is defective. However, if the kit shows an increase in pressure in the rail, it will mean that the dosing valve is faulty. IC index

This kit is dedicated to BOSCH, DELPHI, DENSO, VDO / SIEMENS

YDT410

IC index

YDT850 Hydraulic diagnostic kit (CR)

The kit makes it easy and cost-effective to check the parameters of all Common Rail pumps and injectors without having to remove them from the vehicle. The kit consists of an electronic pressure tester and injector flow measuring unit which allows isolating and checking the actual pressure generated by the fuel pump in the Common Rail system and to determine which injector is defective. Features of the unit and benefits of its application: • Identifies any defective component (pump, injector) in the vehicle CR system • The feature to test components installed in the vehicle makes it unnecessary to disassemble and re-assemble them • Measures pressure generated by CR pumps • Measures the level of return flow at each injector • It is compatible with the following systems: Delphi, Bosch, Denso and Continental • Includes adapters required to diagnose vehicles of all makes. IC index

Fuel analyser

YDT850

Bottles for fuel analyser samples

This unit enables workshop staff to determine if engine damage, e.g. at injectors, is caused by improper fuel (inadequate quality) or a too-high level of biocomponents. It is measured with a 1% accuracy within 60 seconds and requires 46 ml of fuel for this analysis. Such a small amount of fuel can be obtained from the fuel pump or filter. This unit replaces traditional fuel testing in the laboratory and can be performed with the customer present – which is its advantage. IC index

0XAT1830

Container for samples (30 pcs.) IC index

YDT705

YDT553

Bosch Diesel Set 3.1 diagnostic tools The kit consists of: – Storage case with foam insert – Digital pressure indicator – Connection cables IC index

0 986 614 301

– Pressure transducer – Pressure measurement module – Measuring rail – Container – Operating manual (CD-ROM)

FUEL INJECTION SYSTEMS

PUMPS AND INJECTORS ZPD-60 pressure tester This unit is for testing pumping pressure in diesel pumps. Manometer 600 bar M12 and M14 coupling IC index

HP919 000 00

DIESEL VE, DPA, DPC HP923 000 00

For setting pump-injectors in VW/AUDI VAG 1.9/2.0 TDi PD (4 cylinders) engines, made of stainless steel

0XWA0005

For injectors in diesel engines, 1/2"; sizes: 12, 14, 16, 17, 18, 19 mm IC index

Measurement of high pressure in Common Rail systems during operation; pump pressure; tightness

0XAT1018

For setting pump-injectors in VW/AUDI VAG 1.4 TDi PD (3 cylinders) engines, made of stainless steel

For injectors in diesel engines, sizes: 25, 27, 29, 30 mm. IC index

0XAT1367

0XWA0007

Set of specialist caps

For injectors in diesel engines, sizes: 90x21 mm, 80x22 mm, 110x22 mm, 80x27 mm, 80x28 mm, 83x28 mm IC index

Set of specialist caps

HP919 610 00

Measuring bar IC index

Set of spanners

HP924 000 00

COMMON RAIL 2500bar IC index

Measuring bar IC index

For TDI PD (0â&#x20AC;&#x201C;16 bar) tandem pump. For measuring internal pressure. In VW/Audi 1.9 and 2.0 TDI PD engines. IC index

It allows measuring pumping pressure and suction vacuum in VE, DPA, DPC pumps IC index

Pressure sampler

0XAT1033

Hand pump

For venting of fuel systems in diesel engines IC index

0XAT1229

FUEL INJECTION SYSTEMS

Inertia hammer

For removing copper injector gaskets (pads), internal diameter 4â&#x20AC;&#x201C;16 mm. IC index

0XAT1240

Unit used to remove copper injector pads Size: 7.5 / 10 mm, length: 240 mm. Connectors for Bosch/Lucas M8, M12, M14 injectors. IC index

Set of end-mills for cleaning of injector sockets 15X19 mm â&#x20AC;&#x201C; universal model, 17X17 mm for Delphi / Bosch (BMW/PSA/Renault/Ford), 17X19 mm for Bosch (Mercedes CRD), 17X21 mm for Fiat / Iveco, T-handle IC index

Used to remove defective Bosch / Delphi injectors

Renault Opel, Nissan, 2.2/2.5 dci/DTI. It can be fitted with 7-ton hydraulic cylinder.

HP918 580 00

Inertia hammer 4kg

With a set of tips to remove injectors IC index

HP918 460 00

Injector extractor

Citroen/Peugeot/1.6 HDI Bosch/Siemens. It can be fitted with 20-ton hydraulic cylinder IC index

Made of steel, brass and nylon. 36 pcs. Used to clean spark-plug sockets and injectors prior to their replacement. IC index

0XAT8115

Injector extractor

Renault Master 2.0 dCi / Opel Vivaro CDTi. Electromagnetic and piezoelectric injectors IC index

HP918 591 00

0XAT1504

Injector extractor IC index

Set of wire brushes

0XAT1571

Disassembly kit for injectors in diesel engines IC index

0XAT1267

HP918 495 00

Injector extractor

Citroen/Peugeot 2.0/2.2HDI HDI 16V with 20-ton hydraulic cylinder IC index

HP918 490 00

Additional kit

For 2.0HDI 8V engines for the 918 490 00 set IC index

HP918 491 00

Injector extractor

MERCEDES CDI with 7-ton hydraulic cylinder. CDI and A-class Mercedes IC index

HP918 551 00

FUEL INJECTION SYSTEMS

Disassembly kit for VW & Audi injectors

Inertia hammer for disassembling and knocking out injectors

VW & Audi, OEM No. T10133

Connectors for Bosch/Lucas M8, M12, M14 injectors IC index

0XAT1237

IC index

End-mill unit to clean diesel injector sockets Universal guiding unit for Bosch, Delphi injections IC index

0XWA0016

Disassembly kit for injectors Application: VW/Audi TDI FSI, VW/Audi, Seat, Skoda IC index

Denoxtronic Diagnostics Set 1

This set is used to test the DeNOX 1 exhaust gas treatment system. It is used for diagnosing the system by testing the operation of its individual components as well as when repairing the power supply module removed from the vehicle. IC index

0 986 610 800

0XAT1730

Denoxtronic Diagnostics Set 2

0XAT1731

This set is used to test the DeNOX 2 exhaust gas treatment system. It allows testing the hydraulic system and its tightness as well as performing dosing measurements on the pumping and dosing module as part of the Denoxtronic diagnostics. IC index

Denoxtronic PC/LD Diagnostics kit

This set is used to test the DeNOx exhaust gas treatment system for passenger cars and vans. It allows for the full diagnostics of the system specified above. IC index

0 986 610 500

0 986 610 450

Removal set for scorched diesel injectors

Provided with a set of adapters (the kit has no impact hammer; CP7111K is the recommended CP hammer). IC index

829003

FUEL INJECTION SYSTEMS

BIP TESTER

POLISH PRODUCT This is a measuring unit designed to conduct accurate BIP time measurements. It is possible to measure the BIP with no need to disassemble your injector from the engine. The provided software verifies BIP values and optimises the whole kit to its best possible operational range. The program is equipped with a database (with edit/supplement features) and generates reports and printouts on all measurements. IC index

DTE/BIP TESTER

IFM-2 Flowmeter

POLISH PRODUCT This unit is designed to test the output and overflow of diesel engine injectors at the testing station. The IFM-2 unit allows measuring the output and transfer of any tested injector simultaneously. This flowmeter is not sensitive to contamination. IC index

DTE/IFM-2

Electronic dampers tester

POLISH PRODUCT

For DTA-1 diesel engine air. The DTA-1 tester can be successfully used both at air damper remanufacturing companies as well as in vehicle workshops offering a wide range of repairs aimed to diagnose any damper failure. IC index

DTE/DTA-1

Injector Expert InEx-2

POLISH PRODUCT This unit is intended for the comprehensive diagnostics of Common Rail injectors. It allows for the electrical and mechanical testing of coil control parts and piezoelectric piles of injectors together with the evaluation of their intermediate system in-between electrical and mechanical circuits. IC index

PFM-2 Flowmeter

This unit is intended to test the output of Common Rail high-pressure pumps at the pump testing stand. The PFM-2 unit enables to measure the output and transfer of any tested pump simultaneously. IC index

Supplied with the power supply unit. This tester is intended for controlling electromagnetic and piezoelectric injectors in Common Rail injection systems. IC index

DTE/ICR-4

It is used to diagnose controllers (electronic valves, actuators) in turbochargers with VNT (Variable Nozzle Turbine) variable geometry. These controllers are designed to change the position of variable geometry blades or exhaust hatch in the same way as in turbochargers (where these components were controlled by a vacuum).

POLISH PRODUCT

This unit is used to diagnose turbocharger controllers (electronic valves, actuators) with variable geometry and program the operating range of electronic turbochargers manufactured by Hella and Siemens. It can also be used for setting the range of variable geometry.

DTE/TP-TACT

ScopeTester 5 oscilloscope tester

POLISH PRODUCT

This unit is a five-channel oscilloscopic tester which works with PCs. IC index

Supplied with the power supply unit. This tester is used for the diagnosis of Common Rail injection systems. It reads values from the high-pressure sensor and steers two control valves at the same time.

DTE/SCOPETESTER5

POLISH PRODUCT

DTE/TCR-4

TurboProg programmer

It is designed for two types of turbocharger controllers (actuators): Hella and Siemens. It allows reading out the controller's operating parameters, saving them in the unit's internal memory, copying and recording them in the controller, programming and checking its operating range. IC index

POLISH PRODUCT

DTE/VNTT-PRO USB

COMMON RAIL TCR-4 tester

IC index

TP-TACT tester & programmer

IC index

POLISH PRODUCT

DTE/PFM-2

VNTT-PRO tester

IC index

COMMON RAIL ICR-4 injector tester

DTE/INEX-2

POLISH PRODUCT

DTE/TURBO-PROG

EDIA-PRO

POLISH PRODUCT This is a professional solution for the quick and efficient diagnosis of Common Rail injection engines. Thanks to its innovative measuring probes, it allows tracking the course of injection signals of four injectors and signals from the high pressure sensor on the rail with no need to remove injectors. The EDIA-PRO analyser offers simple and user-friendly operation. All recorded results can be viewed and compared. It allows specifying the precise injection signal times and precisely monitoring pressure changes caused by injectors. The EDIA-PRO software enables setting up the database on all tests and their results. IC index

DTE/EDIA-PRO

FUEL INJECTION SYSTEMS

SMART Series QST-5 Sensor tester

The QST-5 tester is designed for testing automotive sensors. The tester supplies power to all the tested sensors independently, so it can be used in the vehicle as well as beyond it. The tester is able to automatically specify any tested sensor variant (inductive or Hall) and specify the arrangement of its terminals. Additionally, it is possible to download the programme for Android, which allows remotely reading out measurements and adds sensors together with their parameters and images to the database. IC index

POLISH PRODUCT

SMART series – SIT-12

This tester is used to diagnose electrical parameters of injectors and pump-injectors. It makes it possible to check electromagnetic injectors and their resistance at 0.001Ω, measures their inductance and insulation conditions. In piezoelectric injectors it is possible to check the state of insulation of the stack and its capacity under high voltage. The SIT-12 tester allows quickly diagnosing whether a given fault is electrical or mechanical in its nature, even without dismantling your injector. IC index

The DBT-12 unit allows safely measuring voltage, start-up current, charge status, determine wear on 12V batteries and can be used as a voltmeter. Its system testing provides advanced diagnostics of vehicle charging and start-up system. The included software allows viewing its results and print reports. It is provided with a new feature, i.e. a recording mode, which allows measuring battery voltage for a long period of time.

DTE/SIT-12

DTE/DBT-12

POLISH PRODUCT

SMART series – SET-12

The Smart Electric Tester SET-12 allows checking numerous vehicle components by measuring electrical parameters such as resistance, inductance and capacity. It is indispensable when detecting short-circuits in the system, controlling insulation conditions and moisture-related problems. It allows for the electrical inspection of control and operational elements, e. g. solenoid valves, actuators or coils. Insulation testing over three voltage ranges (100, 250 and 500 V) allows for the testing of alternator rotors. IC index

DTE/SET -12

DPF Flush for cleaning

DPF Rinse for rinsing

Packing 5 l

Non-flammable liquid intended to clean particle filters.

IC index

ER TR1136.P.01

IC index

ER TR1137.K.01

Spray gun with tank

for DPF particulate matter, the kit includes: DPF Flush 5L, DPF Rinse 5L, spray gun with tank IC index

ER TR1137.P.01

Packing 1 l

ER TR1136.K.01

Filter cleaning and flushing kit

Liquid for rinsing particulate filters upon their cleaning.

IC index

Packing 1 l IC index

POLISH PRODUCT

DTE/QST-5

SMART Series DBT-12 Battery tester

IC index

NEW

for cleaning DPF filters by means of compressed air IC index

ER RP1052.01

ER RK1350

POLISH PRODUCT

FUEL INJECTION SYSTEMS

Wynn’s FuelSystemSERVE

The PETROL/DIESEL injection system cleaning unit allows for the full cleaning of the whole fuel supply system: its injection pump, valves and injectors. Features: – cleaning with no need to dismantle the fuel system – control of fuel pressure – handy 12 V power supply – a set of adapters for European vehicles (optional – adapters for American vehicles) included in the kit – for use in passenger cars and trucks

IC index

With the ultrasonic cleaner.

007935095360

Cleaning unit

For Es 3 injectors, engine and fuel system IC index

with the connection kit IC index

OXFY-100

IC index

OXFY-260

WYNW68432

Gs2 Petrol injector tester IC index

system flushing unit Fuel system flushing unit Fuel with the connection kit

007935095380

Gs4 Petrol injector tester With the ultrasonic cleaner. IC index

007935095370

Testing unit

For GR1R petrol injectors IC index

007935101500

AIR CONDITIONING

TEXA KONFORT Limited Edition

KONFORT 715R

Exclusively at INTER CARS

SPECIAL OFFER Technical data: Refrigerant serviced: R134a or R1234yf Conversion to R1234yf: YES Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES (refrigerant R134a) IC index

ADDITIONAL EQUIPMENT (optional): Refrigerant R134a â&#x20AC;&#x201C; R1234yf conversion kit Refrigerant R134a/R1234yf identifier kit Professional flushing kit for air-conditioning systems Service cable extension kit (up to 12 m)

TEX 715R

(refrigerant R1234yf ) IC index

TEX 715R/1234yf

IC index: TEX 715R/RETROFIT IC Index: TEX S0755B IC index: TEX ACKF01 IC index: TEX 74350900

Refrigerant R134a servicing stations Agent servicing stations

KONFORT 705R

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 10 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: NONE LP/HP valve control: manual Main weight meter blockade: NO Printer: YES IC index

TEX Z10410

KONFORT 710R

TEX Z08510

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 10 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valve control: manual Main weight meter blockade: NO Printer: YES IC index

KONFORT 705R OFF ROAD

TEX Z10480

KONFORT 720R

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: YES Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 12 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valves control: manual Main weight meter blockade: NO Printer: YES IC index

TEX Z06610

AIR CONDITIONING

Refrigerant R134a servicing stations

KONFORT 760R

KONFORT 760R BUS

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: YES Operating mode: automatic / manual Pump capacity: 146 l/min Internal tank: 30 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: YES Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

(with the refrigerant identifier) IC index

TEX Z06750

IC index

TEX Z06752

(with the refrigerant identifier) IC index

TEX Z06820

IC index

TEX Z06822

Refrigerant R1234yf servicing stations

KONFORT 707R

KONFORT 720R

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: -Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 10 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR Oil dosage: manual / automatic (temporary) UV dosage: NONE LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: -Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 12 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valve control: manual Main weight meter blockade: NO Printer: YES

IC index

TEX Z12110

IC index

TEX Z06611

KONFORT 760R

KONFORT 760R BUS

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 146 l/min Internal tank: 30 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

(with the refrigerant identifier) IC index

TEX Z06751

IC index

TEX Z06753

(with the refrigerant identifier) IC index

TEX Z06821

IC index

TEX Z06823

AIR CONDITIONING

Refrigerant R1234yf servicing stations

Refrigerant R134a and R1234yf for servicing stations

KONFORT 770S

KONFORT 780R BI-GAS

Technical data: Refrigerant serviced: R134a and R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 2 x 12 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES

(with the refrigerant identifier)

(with the refrigerant identifier) IC index

TEX Z10051

IC index

Refrigerant R744 (CO2) servicing stations

TEX Z06910

IC index

TEX Z06911

KONFORT 744

NEW

The new KONFORT 744 model was developed by TEXA in cooperation with the leading vehicle manufacturers and in accordance with the strict manufacturersâ&#x20AC;&#x2122; maintenance and operation requirements for air-conditioning systems based on the unique CO2 refrigerant. The KONFORT 744 unit was approved and is recommended by Mercedes-Benz.

GENERAL CHARACTERISTICS efrigerant serviced: R744 (CO2) R High-resolution TFT colour display CL1 manometer set Two-stage vacuum pump 2.5 m service cables +/-10 gr feed precision Hermetic oil tanks to prevent moisture (patented) Automatic and precise oil feeding Automatic identification of oil containers (patented) Automatic measurement of recovered refrigerant Automatic control of CO2 concentration in the atmosphere Balance lock system Thermal printer Vehicle maintenance in automatic mode Multi-language software Automatic length compensation of service lines Automatic signalling and supervision over station checks and inspections Operating modes: ADVANCED PROGRAMME MY DATABASE OPTIONS: Leak detection kit based on Trace Gas IC index

TEX Z11650

AIR CONDITIONING

BOSCH air conditioning servicing station – ACS 611 Limited Edition*

NEW SPECIAL OFFER

only in INTER CARS

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 20 kg LP/HP cables length: 5 meters Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: manual Printer: YES IC index

S P00 000 125

*Limited offer. Subject to stock availability

ACM3000

ACM3000yf

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: semi-automatic / manual Pump capacity: 70 l/min Internal tank: 8 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK Oil dosage: manual UV dosage: NONE LP/HP valve control: manual Main weight meter blockade: NO Printer: YES

Technical data: Refrigerant serviced: R1234yf Operating mode: semi-automatic / manual Pump capacity: 70 l/min Internal tank: 8 kg Vehicles serviced: passenger vehicles Database: CAR Oil dosage: manual UV dosage: NONE LP/HP valve control: manual Main weight meter blockade: NO Printer: YES

IC index

S P01 000 038

S P01 000 018

ACS 511

ACS 611

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 70 l/min Internal tank: 8 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: manual Main weight meter blockade: NO Printer: YES IC index

IC index

NEW

S P00 000 001

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: manual Main weight meter blockade: NO Printer: YES IC index

S P00 000 002

AIR CONDITIONING

ACS 752

ACS 810

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: NO Printer: YES

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 283 l/min Internal tank: 35 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, buses Database: CAR/TRUCK/BUS Oil dosage: manual / automatic (temporary) UV dosage: NONE LP/HP valve control: manual Main weight meter blockade: NO Printer: YES

(with the HIGH PRECISION system)

IC index

(Truck & Bus)

S P00 000 069

IC index

S P00 000 003

ACS 561

ACS 661

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 72 l/min Internal tank: 8 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: NONE Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: manual Main weight meter blockade: YES Printer: YES

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 20 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: manual Main weight meter blockade: NO Printer: YES

IC index

S P00 000 100

IC index

S P00 000 071

New generation of automatic air-conditioning systems with refrigerant R1234yf

AC1234-3

AC1234-7/AC1234-8

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 70 l/min Internal tank: 8 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK Oil dosage: manual / automatic (temporary) UV dosage: NONE LP/HP valve control: manual Main weight meter blockade: NO Printer: optional

Technical data: Refrigerant serviced: R1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 9 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: NO Printer: YES

With the printer IC index

S P01 000 001

IC index

S P01 000 001P

Model: AC1234-7 IC index

S P01 000 005

Model: AC1234-8 With the refrigerant identifier IC index

S P01 000 009

AIR CONDITIONING

New generation of automatic air-conditioning systems with refrigerant R134a/R1234yf

ACS 753

NEW

Technical data: Refrigerant serviced: R134a Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 16 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: NO Printer: YES IC index

ACS 763 / 863h

NEW

Technical data: Refrigerant serviced: R1234yf Operating mode: automatic / manual Pump capacity: 170 l/min Internal tank: 16 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK Oil dosage: manual / automatic (by weight) UV dosage: automatic (by weight) LP/HP valve control: automatic Main weight meter blockade: NO Printer: YES

S P00 000 110 ACS 763 IC index

S P00 000 113

ACS 863 (With the refrigerant identifier) IC index

S P00 000 112

New generation of automatic air-conditioning systems with refrigerant R134a/R1234yf

ALASKA START

ALASKA BUS

Technical data: Refrigerant serviced: R134a or R1234yf Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 70 l/min Internal tank: 10 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valve control: manual Main weight meter blockade: NONE Printer: optional

Technical data: Refrigerant serviced: R134a Conversion to R1234yf: NO Operating mode: automatic / manual Pump capacity: 226 l/min Internal tank: 25 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (temporary) UV dosage: automatic (temporary) LP/HP valve control: manual Main weight meter blockade: NONE Printer: optional IC index

ALASKA START R134a IC index

007950015200

ALASKA START R1234yf IC index

ALASKA PREMIUM R134a Technical data: Refrigerant serviced: R134a Conversion to R1234yf: YES Operating mode: automatic / manual Pump capacity: 200 l/min Internal tank: 25 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR/TRUCK/AGRI Oil dosage: manual / automatic (by weight) UV dosage: automatic (temporary) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES IC index

007950015230

007950015220

007950015210

ALASKA PREMIUM R1234yf Technical data: Refrigerant serviced: 1234yf Conversion to R1234yf: --Operating mode: automatic / manual Pump capacity: 100 l/min Internal tank: 10 kg Vehicles serviced: passenger vehicles, trucks, agri-vehicles, hybrids Database: CAR Oil dosage: manual / automatic (by weight) UV dosage: automatic (temporary) LP/HP valve control: automatic Main weight meter blockade: YES Printer: YES IC index

007950015240

AIR CONDITIONING

Accessories and spare parts for air-conditioning stations

ACKF01

Flushing kit

Flushing kit for R134/R1234yf air-conditioning systems The kit contains over 60 adapters for the above air-conditioning elements. IC index

for air-conditioning systems with basic adapters

ACS X11/X52 ( R134a) IC index

S P00 101 174

TEX ACKF01 ACS X61, ACS1234-x ( R1234yf ) IC index

S P00 101 176

Applied in the following models: KONFORT 600, KONFORT 700 series.

Purity identifier

For R134a and R1234yf in air-conditioning stations. Optional kit for KONFORT 707R / 715R / 760R / 780R stations. The identifier recognizes refrigerants R134a and R1234yf and indicates their purity class (%). 760R / 780R station

707R / 715R station IC index

TEX S0755B

IC index

MINI ID R134a Identifier

TEX S07550 NEW

The identifier – in just 2-3 minutes – enables specifying the required purity of refrigerant R134a (proper/ improper). IC index

007935090940

The identifier – in just 2-3 minutes – enables specifying the required purity of refrigerant R1234yf (proper/ improper). IC index

1234-IDV refrigerant identifier Supported refrigerant: R1234yf Working time: approx. 70 s. Presented result: cleanliness in %. IC index

MINI ID R1234YF Identifier

NEW

S P00 101 103

Performance control kit IC index

TEX S07554

007935021060

Ultima ID refrigerant analyser with printer

NEW

Supported refrigerants: R134a / R1234yf Working time: approx. 70 s. Presented result: cleanliness in %. IC index

for air conditioning systems. Optional the KONFORT 760R/780R station kit to test the performance of your air-conditioning system.

NEW

007935020010

VDC TESTER

Diagnostic interface for the control of variable-capacity air-conditioning compressors. IC index

TEX S05350

Applied in the following models: KONFORT 600 series (with SD card reader), KONFORT 700 series.

Diagnostic kit

for NANOSERVICE Clima air-conditioning systems. Optional KONFORT 760R/780R station kit for the complete diagnostics of air-conditioning systems – i.e. error readout/clearance, ECU info, parameters, activation, adjustments and coding. Information from the NanoService Clima – thanks to the convenient Bluetooth feature (range up to 10 meters) – is displayed on the KONFORT station display. IC index

SPECIAL OFFER Limited offer. Subject to stock availability.

TEX D09012 The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

AIR CONDITIONING

Containers for TEXA KONFORT station – 7xx series

Bottle

for PAG oil (for 760R / 770S / 780R stations) IC index

TEX 3902460

Bottle

for POE oil (hybrid) (for 760R / 770S / 780R stations) IC index

TEX 3903341

Bottle

for UV dye (for 760R / 770S / 780R stations) IC index

for used oil (for 760R / 770S / 780R stations)

TEX 3903340

IC index

TEX 3902786

Containers for the TEXA KONFORT station – 7xx series (705/707/710/715/720)

Bottle for UV

Bottle for PAG/POE oil IC index

TEX 3903066

IC index

Bottle for used oil

TEX 3903066

IC index

TEX 3903069

Containers for BOSCH station – ACS 6xx/7xx series

Bottle for UV

Bottle for PAG/POE oil IC index

S P00 100 059

IC index

Bottle for used oil

S P00 100 061

IC index

S P00 100 060

Universal containers for air-conditioning stations

Bottle 250 ml

with a black cap (plug) IC index

ER FLK025

2016/2017 MM Database covering R134a and R1234yf air-conditioning systems (A-4 book version) IC index

007935090895

Bottle 250 ml

with a yellow cap (plug) IC index

ER FLK026

Bottle 250 ml with a black cap (quick-coupler) IC index

ER FLK027

Bottle 250 ml with a yellow cap (quick-coupler) IC index

ER FLK028

Advertising banner

on the TEXA KONFORT airconditioning system (7xx series) Dimension: 200x100 cm IC index

TEX B22

AIR CONDITIONING

Accessories and spare parts for air-conditioning stations

CLIMA LED UV 1W lamp for leak-detection in air conditioning systems IC index

NEW

LENA 334542

contact: via a bayonet

007950024700

IC index

contact: via infrared / bayonet

contact-free version, from -35 °C to + 365 °C (pyrometer)

IC index

SEA VS904

Laser thermometer

(two probes) with their measurement range: from -50 up to +1350°C

SEA VS905

IC index

Electronic leak location detector

IC index

(for refrigerant R134a)

007950013840

(for refrigerant R1234yf )

007950025830

EVERTACTERMO

Electronic leak detector with UV lamp

(for refrigerant R134a)

Electronic leak location detector

007950013830

Digital double thermometer

contact-free from -50°C to + +550°C (pyrometer)

IC index

007950024030

Double thermometer

Laser thermometer

IC index

007950025190

Thermometer

in a storage case

IC index

with the ZOOM feature, charger and glasses IC index

UV 100W lamp IC index

Mastercool UV 50W lamp

IC index

NEW

007950013850

Electronic leak location detector

(for refrigerants R134a, R1234yf, Hydrogen) IC index

007950027000

AIR CONDITIONING

Accessories and spare parts for air-conditioning stations NEW LP/HP quick-couplers (TEXA 6xx, 7xx series) PARKER 14x1,5, (suitable for R134a)

(TEXA 7xx series) PARKER (suitable for R1234yf )

LP IC index

TEX 42044002

LP IC index

TEX 3903288

HP IC index

TEX 42044004

HP IC index

TEX 3903289

LP/HP quick-couplers

M14 x 1.5 (suitable for R134a)

1/4 SAE (suitable for R134a) LP IC index

ER RA1053.01

LP IC index

ER RA1056.01

HP IC index

ER RA1054.01

HP IC index

ER RA1055.01

LP/HP quick-couplers

PARKER 14x1.5 (for refrigerant R134a)

PARKER 1/4 SAE (for refrigerant R1234yf )

LP IC index

007935020080

LP IC index

007935020120

HP IC index

007935020090

HP IC index

007935020130

Adapter

LP/HP quick-couplers

for air-conditioning systems for Volvo, BMW and others (suitable for R134a) IC index

IC index

007950025810

HP/HP Extension adapter (suitable for R134a) IC index

1/4 SAE (suitable for R134a)

007950024560

R1234yf Tank adapter (Honeywell)

ER RA1032.01

NEW

LP/HP quick-couplers

LP IC index

0XAT3031L

HP IC index

0XAT3031H

Set of connectors

for R134a tank – adapters to fill in inner air-conditioning tanks IC index

TEX 74350364

LP/LP extension adapter (suitable for R134a) IC index

ER RA1060.01

Set of connectors

for R1234yf tank – adapters to fill in inner air-conditioning tanks IC index

TEX 3903475

Adapter

for systems without HP connector (Renault) HP-LP adapter-converter (suitable for R134a) IC index

ER RK1208

AIR CONDITIONING

Extension cables (LP/HP)

Set of LP/HP additional cables

2.44 m long (for ACS s11/x52)

3 m long for 6xx and 7xx series air-conditioning stations IC index

HP IC index

TEX 74350900

Air-conditioning cables

S P00 100 075

Air-conditioning cables

LP/HP 3 m 1/4SAE M14 x 1.5

LP/HP 3 m 1/4 SAE x 1/4 SAE

LP IC index

ER TB7655B

LP IC index

ER TB7651B

HP IC index

ER TB7655R

HP IC index

ER TB7651R

Air-conditioning cables

Tank power supply cable with 1/4” ball valve / nitrogen

LP/HP 3m 3/8 SAE x 3/8 SAE LP IC index

ER TB7653B

HP IC index

ER TB7653R

350 cm (cable colour: yellow) IC index

ER TB7763Y

Adapters for service quick-couplers and LP/HP cables 3/8 SAE (male) 1/4 SAE 1/4 SAE (male) M14x1.5 (female) (male) HP IC index

ER RP1008.01

HP IC index

M12x1.5 (male) 1/4 SAE (male)

ER RP1016.01

HP IC index

ER RP1057.01

Adapters for service quick-couplers and LP/HP cables 1/4 SAE (male) x 1/4 SAE 1/4 SAE (male) x 1/4 SAE (male) (female) (knob colour: white) HP IC index

(knob colour: white)

ER RP1119.01

HP IC index

Cover for air-conditioning stations (for ACS x11/x52) HP IC index

S P00 100 076

ER RP1631.01

PVC cover for air-conditioning stations – KONFORT 7xx series HP IC index

TEX 3903241

NEW

AIR CONDITIONING

Disinfection units for air conditioning systems â&#x20AC;&#x201C; ultrasonic equipment

ATOM MACHINE

SPECIAL OFFER

Ultrasonic disinfection unit for vehicle airconditioning systems with a set of disinfectants (48 x 250 ml) 12 V power supply IC index

230 V power supply

ER VP1035.01.12V

IC index

ER VP1030.01

ATOM PURE

SPECIAL OFFER

Disinfectant for ultrasonic disinfection units for air-conditioning systems. Set of 24 disinfectants (24 x 250 ml) IC index

ER VP1030.01 FLUID

Set of 48 disinfectants (48 x 250 ml) IC index

ER VP1030.01 FLUID 48

1 pc. (250 ml) ATOM PURE IC index

ATOM FLUID

SPECIAL OFFER

When purchasing any set of ATOM PURE disinfectants (24x250 ml or 48x250 ml), you get 3 packs (24x250 ml) of ATOM PURE disinfectants at incredibly low price !!! Ask your Inter Cars representative. (this special offer is subject to stock availability)

AIR+ unit

SPECIAL OFFER

For the disinfection of car air-conditioning systems IC index

TEX 3902348

EVIDIS

Ultrasonic disinfection device for car air-conditioning systems with a set of disinfectants (24 pcs) and fragrance sticks (24 pcs). IC index

8PE351 331-801

Supplementary pack for AIR+/MIST, 12 bottles with disinfectant. IC index

12 fragrance sticks CLEAN CAR fragrance IC index

TEX 39022531

590239

Supplementary pack for EVIDIS, 12 disinfectant bottles, 2 x 12 fragrance sticks, 12 mirror hangs-on. IC index

8PE351 331-811

AIR CONDITIONING

Supplementary packs for Aircomatic® III

Aircomatic® III by WYNN’S

Aircomatic® III is an ultrasonic device with ozone generator used for: a) disinfection of car air-conditioning systems b) removal of odours from within vehicle interiors, caravans, boats, etc. The kit includes: Aircomatic III + 12 AIRCO-CLEAN and AIR PURIFIER disinfectants IC index

AIRCO-CLEAN (12 pcs. x 100 ml) (for air-conditioning disinfection) IC index

WYN68480

WYN30205

AIR PURIFIER (12 pcs. x 60 ml) (for odour removal) IC index

WYN31705

PUREZONE

Ultrasonic disinfection device for car air-conditioning systems with a set of ATOM PURE disinfectants (24 x 250 ml). IC index

Technical data: - power supply 220 V - noise level 70 dB - temperatures range 0 ÷ +60 ⁰C - spraying output 500 ml/h - dimensions L285 x W130 x H210 mm - weight 3,1 kg

EVERTACPUREZONE

Disinfectant liquid

KILLER ODOUR (for ultrasonic devices)

for ultrasonic devices

Packaging: 12 pcs. x 120 ml IC index

NEW

Liquid for removing odours in vehicle interiors (cigarette / tobacco smoke, animals, food smells, etc.)

ER AB1051.G.01

Packaging: 120 ml Packaging: 5 l IC index

IC index

ER AB1051.P.01

ER AB1041.G

Packaging: 5 l IC index

SMOKI

NEW

Nanotech spray for removing cigarette / tobacco odours in vehicle interiors (packaging 200 ml) IC index

WOOFI

Nanotech spray for removing animals smells in vehicle interiors (packaging 200 ml) IC index

ER AB1087.J

ER AB1041.P

NEW

ER AB1088.J

SaniBact*

is a specialised fluid disinfectant with bactericidal, fungicidal and virucidal properties, dedicated for general disinfection and cleaning of cooling systems, air conditioning and ventilation in the food industry, restaurants, hotels, industrial plants, car rental companies, etc. (1 liter package) IC index

ER AB1085.K.01.PL (*) effectively disinfects viruses: influenza (flu), hepatitis B / C, HIV, Rota, Nora and Ebola.

NEW

AIR CONDITIONING

Disinfection facilities for air-conditioning systems producing ozone (ozone-makers) SPECIAL OFFER

CAR OZONER B1000

producing ozone for disinfection (with a mechanical timer) (with a capacity of 1 g/h) IC index

OZ-1GB1000PROFI-M

Ozone generator

M-MX 4000

used for disinfection (1g/h) IC index

Disinfection ozone-generating unit (4 g/h)

430104018045

IC index

EASY FLUSH

MM COOL WEATHER

Flushing device for air-conditioning and cooling systems (power supply: 230/240 V â&#x20AC;&#x201C; 50/60 Hz electric pump) IC index

007936210010

Flushing device for air-conditioning systems (powered by compressed air) IC index

EVERTAC EASYFLUSH

SPECIAL OFFER IN THE KIT

007950024620

The unit price includes: Set of flushing device nozzles.

Super Flush

Flushing device for air conditioning systems with pulsating system (without adapters), 4-liter internal tank allows you to flush almost any system with a capacity of 3-4 kg. Power supply: compressed air IC index

007936210770

NEW

AC FLUSH PRO

electric device for flushing air conditioning systems with a printer (without adapters) Power supply: 12V Pump: max flow = 4.5 liters / min; Maximum pressure = 5 bar IC index

NEW

007935110700

AIR CONDITIONING

BUS Evolution

Flushing device for air-conditioning systems dedicated for buses and large vehicles Power supply 230 V Pump capacity 51 l/min â&#x20AC;&#x201C; up to 8 bar

SPIN 01.000.213

IC index

Manual flushing kit for air-conditioning systems IC index

ER RK1088.01

Errecom Kit

Universal adaptor kit

used to flush air-conditioning systems Benefits: - ready to use - high rinsing pressure - constant pressure until its container is completely empty - no additional equipment required

IC index: ER RP1048.01 ER TR1009.U.M0 ER TR1009.U.M1

used to flush air-conditioning systems IC index

Description: Gun (equipped with a valve and hose) Liquid container 600 ml Liquid container 600ml + connector

Professional set of adapters for flushing AC systems

(dedicated to European and American cars) IC index

007936210020

Flushing liquid

ER TR1009.01

NEW

Set of adapters for flushing AC systems (universal set - extended) IC index

for air-conditioning systems (dedicated for manual devices) 1 litre IC index

ER RK1332

007936210730

Flushing liquid

for air-conditioning systems (dedicated for automatic devices) Packing: 5 litres IC index

ER TR1142.P.01

5 litres IC index

ER TR1055.01

NEW

AIR CONDITIONING

Equipment and accessories for the dismantling, repair and rinsing of air-conditioning systems

Nitrogen generator

Leak test kit

used to check the tightness of airconditioning systems. Capacity: 50 dm3/h, output pressure: 8-9 bar. Power supply: compressed air – max. 12.5 bar IC index

Hydrogen (nitrogen/hydrogen) 1-kg cylinder with hydrogen, reducer, 40-bar pressure gauge, electronic hydrogen detector included in the kit. IC index

WCR00003A

Nitrogen bottle reducer RB-AZ

(24.32x1 1/4” DIN 477) Range: 200/50 bar. 1/4 SAE connecting fitting IC index

IC index

NEW

ER RK1312

Spring Lock tools

3/8”, 1/2”, 5/8”, 3/4”; suitable for GM (Vauxhall/Opel) IC index

0XAT3024

0XAT3018

Spring-lock tool kit (9 pcs.)

used to disconnect air-conditioning cables.

0XAT3019

MERCEDES W211 Special spring-lock IC index

used to detect leaks in air-conditioning systems. The kit contains: UV dye (250 ml), dye remover (100 ml), dye dispenser (50 ml) repeated filling, LP 134a adapter, 1/4 S cable, AE 120 mm, UV LED lamp, protective goggles.

ER RK1280

3/8”, 1/2”, 5/8”, 3/4” (Audi, Citroen, Chrysler, Ford, Hyundai, Peugeot, PSA, Renault, Seat, Skoda, Volvo, VW)

IC index

NEW

SPECIAL OFFER

Spring Lock tools

IC index

007950025890

Universal kit

W24.32x1 1/4”, range 200/10 bar 1/8Z-1/4W 1/4W-7/16Z bushings in the kit.

Nitrogen bottle reducer

007950025880

Supplementary pack with hydrogen (cylinder: 1 kg) IC index

IC index

NEW

ER RL1017.01

SMART Special Spring-lock kit IC index

ER RK1205

TOYOTA Special spring-lock IC index

ER RL1021.01

AIR CONDITIONING

Equipment and accessories for the dismantling, repair and rinsing of air-conditioning systems

HNBR O-Rings MAX BOX

(o-ring kit for air-conditioning systems) The kit contains 1 057 o-rings (72 types) IC index

ER RK1141.RS

TOP KIT BOX

(service kit for air-conditioning systems) The kit contains: HNBR o-rings (360 pcs.) special seals for air-conditioning lines (57 pcs.) service valves, service ports and port nuts (84 pcs.) springlock KIT (48 pcs) IC index

Set of universal O-rings

for air-conditioning systems (172 pcs.) IC index

007935090750

for air-conditioning systems (120 pcs.) IC index

007950024080

Valve changeover kit

(69 pcs.)

007950025520

O-ring kit

for air-conditioning systems

0XAT3029

O-ring and ring spring kit for AC air-conditioning systems IC index

0XAT3029A

0XAT3043

Set of HP / LP nuts and service ports IC index

for air-conditioning systems (435 pcs.) 29 types

IC index

for R12a and R134a air-conditioning systems The kit contents: standard valves – 5 pcs. GM valves with enlarged diameter - 10 pcs. R134a Jra low/high – 10 pcs. R134a M10 – 5 pcs. R134a M8 – 5 pcs. 1 pc – R12/R134a valve wrench IC index

Set of universal O-rings IC index

Set of standard O-rings

ER RK1161.RS

007950025260

Safety nut kit HP/LP service ports (60 pcs.) IC index

ER RK1052

AIR CONDITIONING

Clamping press

For air-conditioning line terminals, manual hydraulic pump. The storage case contains the following hose clamps: #6 (5/16), #8 (13/32), #10 (1/2), #12 (5/8).

For air-conditioning line terminals, mechanical. The storage case contains the following hose clamps: #6 (5/16), #8 (13/32), #10 (1/2), #12 (5/8)

0XAT3027

IC index

0XAT3028

Clamping dices

(for hydraulic and mechanical presses) They are available in 7 sizes kit – 1 set of dies (2 pcs)

IC indexes:

Size:

ER RL1025.01

SRB G6 (5/16”) G6

ER RL1026.01

(5/16”),SRB G8 (13/32”)

ER RL1027.01

SRB G10 (1/2”)

ER RL1028.01

SRB G12 (5/8”)

ER RL1029.01

G12 (5/8”)

ER RL1030.01

G10 (1/2”)

ER RL1031.01

G8 (13/32”)

Repair set for metal pipes

in a convenient cabinet. The cabinet contains a crimper and a dozen repair kits and sections of metal tubes that allow the repair of any car air conditioning system. Scope of delivery: set with cabinet and crimper. Assembly elements: 5 x 2 connection tube-tube, 5 x 2 connection tube rubber hose, snap-and-bolted connections for tubes and rubber conduits, 26 x aluminium tubes, sealing agent. IC index

Autonomous vacuum pump

(two-stage) capacity: 70 l/min with a solenoid valve and pressure gauge Power supply: 220 V/50 Hz Manometer: 80 mm Service connector: 1/4”

O-ring disassembly kit IC index

TEX 1003030

ER VP1017.01

IC index

Pliers

for rubber lines, PVC 3–35 mm IC index

8PE 285 100-001

0XCT6035

Cutter

for metallic lines (3–22 mm) IC index

0XCT6026

AIR CONDITIONING

Manometer kit

Used for leak testing and pressure measurement in air conditioning systems (R134A, R12). Line length: 2000 mm (1/4 SAE)

Used for leak testing and pressure measurement in air conditioning systems (R134A, R12). Line length: 1550 mm. IC index

0XAT3030-01

IC index

Manometer kit

Used for leak testing and pressure measurement in R1234yf air conditioning systems. Lines length: 1800 mm. IC index

007950024715

for air-conditioning systems with a ball valve (1/4 SAE connectors)

ER MN1062.01

used to replace valves without opening

0XAT3025

¼ SAE - 63mm

430104017091

Cylinder supply cable with 1/4” ball valve / nitrogen 350 cm (line colour: yellow) IC index

HP/LP hermetic valve

ER TB7763Y

Octagonal wrench

used to dismantle LP R134a service ports IC index

007950014150

Octagonal wrench

used to dismantle HP R134a service ports IC index

NEW

007950014300

Universal manometers IC index

Leak testing gauge

IC index

(suitable for refrigerant R134a) IC index

NEW

for refrigerant R1234yf

IC index

Digital manometers ¼ SAE

007950024725

Manometers IC index

NEW

ER MNK031

007950014160

NEW

AIR CONDITIONING

Equipment and accessories for the dismantling, repair and rinsing of air-conditioning systems

Puller kit For clutches of air-conditioning

compressors. For compressors: HARRISON: A6, R4, DA6, HR6, V5 FORD: FS6; CHRYSLER: C171. IC index

For clutches of air-conditioning compressors.

0XAT3014

Toolkit

For disconnecting air-conditioning and fuel lines, 29 elements. IC index

For clutches of air-conditioning compressors. IC index

0XAT3015

Universal puller kit IC index

Universal puller kit

0XAT3042

0XAT3013

Toolkit

For disconnecting airconditioning and fuel lines, 21 elements. IC index

0XAT3002

â&#x20AC;?Oil Guardâ&#x20AC;? oil tester

For air-conditioning system. It allows visually checking the quality of the oil, the degree of the oil-refrigerant mixing, the presence of contrast agent, contaminants in any air-conditioning system under control. for refrigerant R134a IC index

ER RK1268

for refrigerant R1234yf IC index

Wrench for removing valve inserts IC index

0XAT3026

Heat-shrink seals for LP / HP service ports

(with identification number) (20 pcs.) IC index

Tester for compressors

This device is used to check the correct operation of compressor valves. IC index

007935063040

ER RK1025

0XACSEAL

Valve tester for ACT-2 air-conditioning systems

It allows checking the correct operation of the following air-conditioning compressor types: compressor with an electromagnetic clutch, compressor with clutch-less drive. IC index

DTE/ACT-2

AIR CONDITIONING

LUXEDO â&#x20AC;&#x201C; revitalising liquid for air-conditioning evaporators

Liquid used to clean condensers (5 l)

NEW

It removes dirt, dust, oil, etc. improves condenser efficiency.

It removes impurities and slows down the creation of new impurities. No rinsing required. container: 1 l IC index

ER AB1073.K.01

IC index

ER AB1073.P.01

EVO TABS

NEW

Capsules used to clean air-conditioning evaporators (1 capsule for 5 l of water). It removes impurities and slows down the creation of new impurities. (18 pcs.) IC index

ER AB1089.01

NEW

Biodegradable liquid used to clean airconditioning evaporators. It removes impurities and slows down the creation of new impurities (concentrate 1:6). (spray: 1 litre)

ER AB1071.K.01

NEW

SPECIAL OFFER

IC index

007950024690

ER AB1072.K.01 ER AB1072.P.01

POWER CLEAN (600 ml)

NEW

High-pressure cleaner for cleaning condensers and evaporators. It removes impurities and slows down the creation of new impurities. No rinsing required.

The unit price includes: 18 capsules for cleaning steamers (EVO TAPS) 18 capsules for cleaning condensers (KINO TABS) 1 capsule allows to prepare 5 litres of liquid

used to detect leaks

Biodegradable liquid used to clean airconditioning condensers. It removes impurities and slows down the creation of new impurities (concentrate 1:6).

IC index

ER PM1003.01

Foam

ER AB1090.01

(5 litres)

(tank 10 l) used to spray evaporators and condensers in air-conditioning systems IC index

NEW

ECO RESTORE

IC index

ER AB1071.P.01

Sprayer with pump

Capsules used to clean air-conditioning condensers (1 capsule for 5 l of water). It removes impurities and slows down the creation of new impurities. No rinsing required. (18 pcs.)

(spray: 1 litre)

(5 litres) IC index

KINO TABS

IC index

Biodegradable chemistry ECO JAB

IC index

ER AB1207.P.01

container: 5 l

IC index

Foam

used to detect leaks IC index

ER TR1111.01

ER AB1063.U.01

Foam

fluorescent, used to detect leaks IC index

ER TR1113.01

AIR CONDITIONING

Agents used to clean and disinfect air-conditioning systems

Agents used to professionally clean and disinfect air-conditioning systems. They allow cleaning your car’s air-conditioning system effectively. They eliminate bacteria and fungi, refresh and keep unpleasant smells away.

Volume: 400 ml IC index

Volume: 400 ml

CRC AIRCO CLEANER 400ML

IC index

Volume: 500 ml

CLIM 400ML

IC index

K2 W100

” Grenade” agents used to clean and disinfect air-conditioning systems

”Grenade” agents used to clean and disinfect all types of ”grenade”-type car air-conditioning systems. They quickly remove all kinds of bacteria, fungi, moulds and viruses in car air-conditioning systems which cause unpleasant odours and other allergic reactions. They leave a pleasant and fresh fragrance. These ”grenate” agents are easy to use.

Volume: 100 ml IC index

Volume: 200 ml

CART00225

IC index

CRC AIRCO KLEEN 200ML

Antifungal agent for AC systems

200 ml (so-called ”grenade”) kills bacteria and fungal spores, approved by the Minister of Health IC index

ALD PRO CLIM MINI

IC index

LOC HYGIENE SPRAY 150ML

Antifungal agent for AC systems

400 ml (with an airflow cleaning tube) kills bacteria and fungus spores, approved by the Minister of Health IC index

VALEO CLIM PUR

ALD PRO CLIM

VALEO CLIM SPRAY

Air-conditioning disinfectant 125 ml with anti-bacterial, anti-mould and anti-odour properties. IC index

Volume: 150 ml

Air-conditioning cleaning agent 125ml (so-called ”grenade”) with anti-bacterial and anti-odour properties.

VAL698984

IC index

VAL698899

Agent containing active ingredients against bacteria and fungi

For vehicle air-conditioning units. It provides long-lasting effects because its active ingredients not only eliminate fungi and bacteria, but also prevent their formation for a long time.

Volume: 5 l / 500 ml IC index

LOC TEROSEPT SET

Volume: 5 l IC index

LOC TEROSEPT 5L

Volume: 5 l IC index

LIM4092

AIR CONDITIONING

EXTREME A/C Leak STOP â&#x20AC;&#x201C; sealant for air conditioning systems

EXTREME removes all problems with small refrigerant leaks in the rubber and metal components of air conditioning systems. EXTREME A/C Leak STOP - is a 100% mix of ingredients friendly to greases and all types of refrigerants. Additional advantages: - compatible with all types of refrigerants - does not react with air and moisture

- no inclusion of polymers (no clogging / sticking of the compressor and external devices for the air-conditioning service) - visible in the UV light - ideal for preventive applications

How does EXTREME A/C Leak STOP work? leak

injection of EXTREME (LP port)

EXTREME Cartidge 30 ml (syringe) (with R134a adapter) IC index

ER TR1062.C.J7

mixed with oil and refrigerant, EXTREME is accumulated during leakage causing sealing

(with elastic line and R134a adapter) IC index

ER TR1062.C.K6

EXTREME Push&Fill 30 ml (container under pressure 11 bar) (with R134a adapter) (with elastic line and R134a adapter) IC index

ER PF1062.C.J7

IC index

EXTREME A/C Leak STOP Cartridge Dual PACK (2 x 30 ml) IC index

ER TR1062.C2.J7

EXTREME ULTRA

State-of-the-art and super-efficient sealant for air-conditioning systems. Just one portion (6 ml) of this sealant allows eliminating all leaks up to 0.3 mm. Safe for all air-conditioning systems. Visible in UV light IC index

NO-ACID Acid neutraliser for air-conditioning systems (for refrigerants R134a / R1234yf) â&#x20AC;&#x201C; 30 ml

Pluses: Neutralizes any acid residue caused by any deflated compressor, worn lubricant and moisture. Once introduced into the NO-ACID system, it prevents the formation of acid inside it Ideal for preventive applications Fast in action. IC index

ER PF1062.C.K6

ER TR1163.AL.J7

NEW

EXTREME ULTRA 6 ml

(syringe) Super-effective EXTREME sealant (with R134a and R1234yf adapter) (suggested for small AC systems) IC index

ER TR1163.AL.H2.S2

COMPRESSOR+

Regeneration additive for air-conditioning compressors in the event of replacement with a new compressor or after flushing an air-conditioning system. This product removes residual impurities and acids, protecting the compressor and other airconditioning components. Volume: 6 ml. IC index

ER TR1162.AL.01

ER TR1124.C.J7

NEW

AIR CONDITIONING

COOL-SHOT – chemical agent increasing efficiency of air conditioning systems

COOL-SHOT is a synthetic catalyst that can effectively improve AC systems efficiency by reducing energy consumption

Advantages of COOL-SHOT: - improves thermal exchange up to 73% - provides a lowering of the „leaving” temperature by approx. 2-3 degrees Celsius - improves lubrication of the compressor up to 54% - reduces friction, vibration and noise inside the compressor - especially recommended for „several years” AC systems

How does COOL-SHOT work? internal contaminants limiting heat exchange

injection of COOL-SHOT (LP port)

after approx. 30 min. of AC system operation synthetic catalysts eliminate pollution improving thermal exchange up to 73%

COOL-SHOT Cartidge 30 ml (syringe)

COOL-SHOT Push&Fill 30 ml (container under pressure of 11 bar)

(with R134a adapter)

IC index

ER TR1122.C.K6

COOL-SHOT ULTRA 6 ml

(syringe) Super-effective chemical agent with R134a and R1234yf adapter (suggested for small AC systems) IC index

IC index

ER PF1122.C.K6

NEW

ER TR1170.AL.M4.S2

ERRECOM – specialised chemical products (sealants) STOP UP ENGINE (250 ml) STOP UP POWER STEERING (250 ml) Sealant with a specially developed formula for stopping all leaks from diesel and gasoline engines. The product revitalizes hard, crushed and leaky gaskets. IC index

ER TR1061.Q.P2

STOP UP TRANSMISSION (500 ml) Sealant with a specially developed formula dedicated to car gears. The product revitalizes hard, crushed and leaky gaskets IC index

ER TR1145.M.P2

ERRECOM – specialised chemical products (dyes) UV COOLANT (250 ml) Dye for checking the tightness of cooling systems (water coolers). Visible in the UV light IC index

ER TR1201.Q

NEW

Sealant with a specially developed formula dedicated to power steering systems. The product revitalizes hard, crushed and leaky gaskets IC index

ER TR1144.Q.P2

STOP UP POWER HYDRAULIC (1000 ml) Sealant with a specially developed formula dedicated to hydraulic systems in construction equipment and agricultural machines. The product revitalizes hard, crushed and leaky gaskets. IC index

ER TR1146.K.P2

UV ENGINE (250 ml)

Dye for checking engine components (engine oils, hydraulic oils, power steering, transmissions). Visible in the UV light IC index

ER TR1203.Q

AIR CONDITIONING

EXTERNAL

ERRECOM EXTERNAL is the latest sealant for air-conditioning components for external applications. It seals leaks of up to 5 mm in air-conditioning system components. Resistant to temperature changes. For use on thermoplastic lines. Thermal resistance: -100 °C up to +270 °C IC index

ER TR1166.01

Pressure resistance to leakage: 5 mm – 40 bar 2 mm – 50 bar 1 mm – 57 bar

NEW SEALUP – Sealant for air-conditioning system connection – 50 ml

Benefits: Resistant to vibrations of parts and their combinations Thermally resistant (-90 °C / +200 °C) It seals both ”vacuum” and overpressure (up to 500 bar) IC index

NEW

THOR – Aerosol agent for cleaning/eliminating impurities within air-conditioning system connections – 200 ml IC index

ER TR1157.Y

NEW

ER TR1013.J

Oils for air conditioning systems (without UV dye)

PAG air-conditioning oil

SPECIAL OFFER

IC index

COOLMAX PAG 46 250ML

IC index

PAG-OIL 100 250 ml IC index

ER OL6001.Q.P2

PAG-OIL 100 250 ml

COOLMAX PAG 100 250ML

IC index

PAG-OIL 150 250 ml IC index

PAG air-conditioning oil PAG-OIL 46 250 ml

PAG-OIL 46 250 ml

ER OL6003.Q.P2

PAG-OIL 125 250 ml

COOLMAX PAG 150 250ML

IC index

ER OL6004.Q.P2

PAG-OIL 150 250 ml IC index

PAG air-conditioning oil (1 litre) PAG-OIL 46 1000 ml IC index

ER OL6001.K.P2

IC index

ER OL6003.K.P2

IC index

PAG air-conditioning oil IC index

ER OL6047.Q.P2

PAG 100 250 ml IC index

ER OL6003.P.P2

PAG-OIL 150 5000 ml

ER OL6005.K.P2

for refrigerant R1234yf PAG 46 250 ml

ER OL6001.P.P2

PAG-OIL 100 5000 ml

PAG-OIL 150 1000 ml IC index

PAG air-conditioning oil (5 litres) PAG-OIL 46 5000 ml

PAG-OIL 100 1000 ml IC index

NEW

ER OL6005.Q.P2

ER OL6005.P.P2

PAG PREMIUM air-conditioning oil (for R134a, R1234yf, hybrid and electric vehicles) PAG PREMIUM 250 ml Viscosity: 68 IC index

ER OL6057.Q.P2

ER OL6048.Q.P2

NEW

AIR CONDITIONING

POE 100 HYBRID oil

for hybrid and electric vehicles (250 ml) IC index

COOLMAX POE 100 250ML

PAO air-conditioning oil

PAO-OIL 68 1000 ml IC index

PAO-OIL 68 1000 ml

COOLMAX PAO 68 1L

IC index

POE air-conditioning oil

RENISO TRITON SEZ 55 (1000 ml) (recommended for air-conditioning systems in buses) IC index

ER OL6033.Q.P2

FUCHS/SEZ55

ER OL6035.K.P2

POE air-conditioning oil RENISO TRITON SEZ 80 (1000 ml) IC index

FUCHS/SEZ80

Air-conditioning systems (with UV dye)

PAG + UV air-conditioning oil PAG-OIL 46 UV 250 ml IC index

ER OL6006.Q.P2

PAG-OIL 100 UV 250 ml IC index

ER OL6008.Q.P2

PAG-OIL 125 UV 250 ml IC index

ER OL6045.Q.P2

PAG-OIL 150 UV 250 ml IC index

ER OL6010.Q.P2

PAG + UV air-conditioning oil PAG-OIL 46 UV 1000 ml IC index

ER OL6006.K.P2

PAG-OIL 100 UV 1000 ml IC index

ER OL6008.K.P2

PAG-OIL 150 UV 1000 ml IC index

ER OL6010.K.P2

AIR CONDITIONING

UV dye

(Contrast agent) volume: 1 l used to check the tightness of air-conditioning systems PACKAGING: 1L! (refrigerant R134a) IC index

COOLMAX DYE 1L

UV dye

SPECIAL OFFER

(Contrast agent) volume: 250 ml used to detect leaks in air-conditioning systems (refrigerant R134a) IC index

COOLMAX DYE 250ML

UV dye Fluorescent dye used to detect leaks in air-conditioning systems. Application: refrigerants R12, R134a, R1234yf also in hybrid and electric vehicles.

NEW

Packaging: 250 ml IC index

ER TR1003.01.S1

Packaging: 1000 ml IC index

ER TR1A03.01

UV dye

12 pcs. x 7.5 ml (with an adapter for LP port) (recommended for non-UV-dye dispensing stations) IC index

ER TR1058.K1.P1

Remover for UV dye

(contrast agent) 1000 ml IC index

ER TR1108.K.01

NEW

AIR CONDITIONING

Consumables for air-conditioning stations

Filter for air-conditioning stations EVERT BASIC/PLUS/COUNTRY IC index

EVERTACFILTR

for large stations (filter + oil + foam for leak identification + o-rings) for AIR CHECK/CLIMA TECH/STRAY DELPHI/BOSCH SILVERTRONIC stations

007950024130

ROBINAIR SPX VALEO diameter 76 mm, length 275 mm

007950025050

IC index

S P00 101 192

ClimFill Auto and Advance IC index

VAL699957

KONFORT 6xx/ 7xx series

IC index

Filter for AC stations

Bosch ACS 752 / Robinair AC 1234-7, 1234-8 IC index

Filter for AC stations

Vacuum pump filter

Printer paper

1 set = 10 pcs. per air-conditioning station IC index

TEX 74350208

Filter for AC stations VALEO ClimFill PRO IC index

VAL710218

Filter for AC stations VALEO ClimFill EASY IC index

VAL710219

S P01 100 355

RT57/5

Filter for AC stations

Refrigerant

Price: on request

R134a, 12 kg (the cylinder included in the price)

IC index

ClimFill â&#x20AC;&#x201C; One IC index

TEX 4800032

KONFORT 6xx/7xx and PROFITOOL PRO605E series

S P00 100 001 370

Bosch ACS 511, 661

TEX 430008020

Mechanical filter for AC stations

Bosch ACS 611, 652 and 810

Filter for AC stations

(2 pcs. required)

IC index

Filter for AC stations IC index

TEX 42801002

O-ring for dehumidifier filter IC index

Filter for air-conditioning stations IC index

KONFORT 6xx, 7xx, PROFITOOL PRO605E/ACM3000, ATT, ACS 6xx series (for refrigerant R134a) IC index

Service kit IC index

Filter for air-conditioning stations

R134A/12+BUTLA

R1234yf, 5 kg (the cylinder in the price)

IC index

R1234YF/5+BUTLA

VAL710115

Inner o-ring

Vacuum pump oil

for LP/HP quick-couplers

ROBINAIR (0.6 l) for air-conditioning stations

LP IC index

TEX 430002111

HP IC index

TEX 430002113

IC index

S P00 100 086

Vacuum pump oil (0.5 l)

IC index

007935090600

Vacuum pump oil for air-conditioning stations

IC index

TEX 3900820

AIR CONDITIONING

All periodic checks during the warranty period are conducted solely by the manufacturer’s qualified personnel or INTER CARS only. It applies to the following stations: EVERT, PROFITOOL, TEXA, VALEO. The scope of an individual periodic check includes, among others: - replacement of consumables + deletion of pump meter and counter data - checking seals and line connections - checking / calibration of the main and supplementary weight meters - checking / calibration of pressure sensor(s) - checking / calibration of dosage / recovery of refrigerant, oil and UV - FIRMWARE software upgrades (the main software – for TEXA stations) - database upgrades (as an option – the cost depending on the manufacturer, model and software version)

Air-conditioning station database update:

KONFORT 6xx* / 7xx series (upgraded on-line via the TEXA feature) IC index

TEX AKT KONFORT 1

(for owners with 1 outstanding software version) IC index

TEX AKT KONFORT 2

(for owners with 2 outstanding software versions) IC index

TEX AKT KONFORT X

(for owners with 3 or more outstanding software versions) (*) applies to stations with an SD card only

NOTE: In all 6xx stations with no SD card and in all 6xx stations with an SD card where the FIRMWARE main software is lower than FW 04.07.01, the database update also requires upgrading the FIRMWARE software, which can be solely performed by authorized TEXA staff. To check your FIRMWARE version and database, press and hold the orange INFO button. The following information will appear on the screen: FW XX (XX stands for your FIRMWARE version) DB XX (XX stands for the version number of your database; the current version is 15)

ACS 5xx / 6xx / 8xx series (via the software key) IC index

S P00 101 429

ACS 752 series (the file is loaded from your SD card) IC index

1 987 726 998

ACM3000 (via the software key) IC index

S P00 101 428

ClimFill Advance / Auto / Expert/ Bus series (via the software key) IC index

S P00 101 429

Clima Tech Top 2016 Station Database upgrade (memory card) IC index

007935090890

Clima Tech Plus/Hd Next 2016 Station Database upgrade (memory card) IC index

007935090880

Clima Tech Mobile/Evolution 2016 Station Database upgrade (memory card) IC index

007935090870

AIR CONDITIONING

SCHEDULE OF MAINTENANCE CHECKS AND SERVICE MATERIALS FOR AIR-CONDITIONING STATION Manufacturer

Series / Type

Hours of vacuum pump operation

Amount of recovered refrigerant

90 h TEXA

6xx, 7xx series 150 kg

650 series 651, 751 series 511 series BOSCH 611, 652 series 752 series

810 series

150 kg 60 h 75 kg 50 h 50 kg

Easy

Profi Mobile Plus Next Top

TEX 4800032

Filter dehumidifier

TEX 42801002

Mechanical filter

TEX 74350208

O-ring / filter dehumidifier and mechanical filter

TEX 430008020

Vacuum pump oil

S P00 100 086

Filter dehumidifier with gaskets

F002 DG1 405

Vacuum pump oil

S P00 100 086

Filter dehumidifier (with serial filters)

F002 DG1 534

Vacuum pump oil

S P00 100 086

Filter dehumidifier

S P00 100 001 370

Vacuum pump oil

S P00 100 086

68 kg

Filter dehumidifier

S P01 100 355

Vacuum pump oil

S P00 100 086

150 kg

Filter dehumidifier

S P00 100 001 370

Vacuum pump oil

S P00 100 086

Filter dehumidifier

VAL699957

Vacuum pump oil

S P00 100 086

Filter dehumidifier

VAL710115

Vacuum pump oil

VAL710207

60 h 68 kg 60 h 45 kg 60 h 150 kg

50 kg

130 kg

POLARIS HUSKY

Vacuum pump vapour filter

50 h ATT HELLA

S P00 101 192

100 h EVERT

TEX 3900820

S P00 100 086

45 kg

Basic Plus Country

150 kg

ACM 3000

Vacuum pump oil

50 h BOSCH / Profitool

Vacuum pump oil

30 h

50 h

Index

Filter dehumidifier

10 h

First, One

Qty.

150 kg

10 h

Name

10 h

Auto, Advan.

VALEO

Magneti Marelli

60 h

To be replaced

60 kg

Filter dehumidifier

VAL710219

Vacuum pump oil

VAL710207

Filter dehumidifier

VAL710218

Vacuum pump oil

Filter dehumidifier

Service kit – pump oil and filter dehumidifier 007950024130

Vacuum pump oil

S P00 100 086

Filter dehumidifier

0XPTKM0005

Filter dehumidifier o-ring

TEX 430008020

Vacuum pump oil

Filter dehumidifier

EVERTACFILTR

Filter dehumidifier o-ring

TEX 430008020

Vacuum pump oil 1

Service kit – pump oil and filter dehumidifier 8PS 179 502-481

Filter dehumidifier

LIST OF RECOMMENDED MATERIALS Name

Quantity

Index

LP/HP service lines o-ring (10.3 x 2.4)

TEX 4800045

LP service quick-coupler inner o-ring (R134a)

TEX 430002111

HP service quick-coupler inner o-ring (R134a)

TEX 430002113

Printer paper (1 pack = 10 rolls)

RT57/5

Ozon Maker Ozonator MX-4000

The highest confirmed efficiency of ozone years of experience! www.wyposazeniemm.pl

SATISFACTI O

2 YEARS WARRANTY AG

LL NETI MARE

years of tradition

430104018045

1000 mg/h

Ozon-Maker - ozone generating device The device, by ionizing the air, produces unstable allotropes of oxygen, i.e. ozone O3. Ozone, being a very strong oxidant, and removes all impurities accumulated in the cabin. It effectively removes damp that collects mainly on floor coverings and on air conditioning evaporators. It also eliminates unpleasant odors. Depending on the size of vehicle cabin and the degree of its contamination, the device has the ability to select the operating mode and time (5, 10, 15, 30, 60 minutes). In case of buses, it is recommended to use several Ozone Maker devices. Ozone (O3) is in the atmospheric air, where it is formed from oxygen under the influence of UV radiation. Ozone is a gas heavier than air, it is unstable and decomposes quickly. Decomposition accelerates growth of the temperature, humidity and air pollution. In water, ozone decom - poses more rapidly than in the air. In the form of gas it is colorless, in thicker layers it is blue. In the liquid state it is intensely dark-blue, and in the solid state it is almost black. Ozone is a very strong oxidizing compound, much stronger than oxygen. It breaks down into oxygen molecules and atomic oxygen. Due to its very strong oxidizing properties is widely used in industry. TECHNICAL SPECIFICATIONS AND OPERATING CONDITIONS: • dimensions: 320 x 220 x 95 mm. • supply voltage: 220/240 V- 50 Hz – 0,15 A – 18 W • device capacity: 3 l/min. • ozone production: 1 g/h • thanks to its compact design and long ozone exhaust pipe, removal of contaminants is extremely easy. • placing the pipe tip, ended with a probe, in the desired location in a cabin or in the dust filter’s location, does not pose any problems. • easy to handle • removes all impurities • removes damp • eliminates odors • easy and environment friendly functioning • eliminates costs of use and disposal of chemicals.

007936210010

4000 mg/h

Ozonator MX4000 - ozone generating device M-MX4000 ozone generatorThe M-MX4000 ozone generator is intended for COMMERCIAL AND INDUSTRIAL USE. The machine operates on single-phase AC voltage of Un = 230 V at 50 Hz. This machine generates ozone. Ozone is one of the most effective known disinfectants. Ozone displays bactericidal action at a concentration of 13 μg/dm3. The bactericidal action of ozone is about 50 times better and 3000 faster than of chlorine. Ozone is an irritant gas which damages biological membranes by free radical reactions with the membrane components. Once in living cells, ozone may inhibit the action of cellular enzymes and arrest intracellular respiration. The first symptoms of ozone irritation (observable already at 0.2 μg/ dm3) include: coughing, sore throat, drowsiness and headache. Ozone’s half-life is (practically) short: 30 minutes; hence its primary concentration falls to approx. 6% in two hours. TECHNICAL SPECIFICATIONS AND OPERATING CONDITIONS: • Model: M-MX4000 • Ozone generator output: 4000 mg/h • Internal pump output: 10-15 l/min • Programmable time counter: 1-60 min • Pump pressure output: 17 kPa • Operating conditions: use inside well-ventilated rooms without any corrosive gases in the ambient air • Ambient pressure: 100±4 kPa • Ambient temperature range: 5-40°C • Relative ambient humidity: ≤ 80% • Ozone generation process: coronary discharge • Output line diameter: 8 mm • Power supply: AC, 220-240 V 50 Hz.

WHEEL GEOMETRY MEASUREMENTS

NEW

V2200 geometry measurement device, Pro42 Silver software

High accuracy and reproductivity of measurements Small individual XD passive discs Basic measurement and regulation procedures Various installation options (inspection-pit, jack, mobile version) Professional measurements and high performance: - improved camera / passive disk technology – faster, more accurate and sensitive measurements - new smaller and lighter XD passive discs – ergonomics and convenience - AC100 universal handles – service for 11”–22” wheel rims (optional extension by an extra 4”)

PRO42 measurement software in the SILVER version: Simple and intuitive to use – it provides accurate and quick suspension adjustment and diagnostics - adjustable start-screen set-up - customised set-up of measurement procedures (wizard) - user login – password protection - print-out of individual control reports and inspection forms - diagnosis of vehicle dynamics - rapid measurement and adjustment procedures - measurement of wheel tilting with zero alignment (as required by Mercedes) - EZ-Toe feature to adjust alignment with turned wheels - measurement of basic suspension dimensions - measurement of convergence curves (as required by VW and Audi) - automatic reminder to measure the level of suspension - control programmes for various types of suspension

V2200 geometric measurement device with a manual lift Pro42 Silver software AC100 terminals 22” TFT display Jack or inspection-pit version, equipped with a post and a manual lift IC index

EEWAEU544G1-M

V2200 geometric measurement device Pro42 Silver software AC100 terminals 22” TFT display Inspection-pit version, wall-mounted cameras IC index

EEWAEU544G2

V2200 Lift geometric measurement device with an electric lift Pro42 Silver software AC100 terminals 22” TFT display Jack or inspection-pit version, equipped with a post and an electric lift IC index

EEWAEU544G1

WHEEL GEOMETRY MEASUREMENTS

NEW

V2300 geometry measurement device, Pro42 Gold software

High accuracy and reproductivity of measurements Small individual XD passive discs Basic measurement and regulation procedures Various installation options (inspection-pit, jack, mobile version) Professional measurements and high performance: - improved camera / passive disk technology – faster, more accurate and sensitive measurements - new smaller and lighter XD passive discs – ergonomics and convenience - AC400 quick-mounting handles – support for wheels up to 99 cm in diameter; the handles do not touch the rims! Made of magnesium alloy – lightweight and durable

PRO42 measurement software in the GOLD version: Simple and intuitive to use – it provides accurate and quick suspension adjustment and diagnostics - adjustable start-screen set-up - customised set-up of measurement procedures (wizard) - user login – password protection - print-out of individual control reports and inspection forms - diagnosis of vehicle dynamics - rapid measurement and adjustment procedures - measurement of wheel tilting with zero alignment (as required by Mercedes) - EZ-Toe feature to adjust alignment with turned wheels - measurement of basic suspension dimensions - measurement of convergence curves (as required by VW and Audi) - automatic reminder to measure the level of suspension - control programmes for various types of suspension - OEM measuring procedures (compliant with the manufacturer’s requirements) - co-operation with the Romes inclinometer - measurement of the following suspension dimensions under vehicle roll-over: vehicle diagonals, wheel base, wheel shift in relation to the axle offset, variances if measured under the parameters - measurement of wheel diameters when the vehicle is rolled over - rotational speed calculations for each wheel separately - quick check if whether the right wheels are fitted - measurement and adjustment when wheels are removed

V2300 geometric measurement device with a manual lift

Pro42 Gold software AC100 or AC400 (quick-mounting) terminals 22” TFT display Jack or inspection-pit version, equipped with a post and a manual lift IC index

AC400 terminals

EEWAEU545H2-M

V2300 geometric measurement device Pro42 Gold software AC100 or AC400 (quick-mounting) terminals 22” TFT display Inspection-pit version, wall-mounted cameras IC index

AC400 terminals

EEWAEU545H1

V2300 Lift geometric measurement device with an electric lift

Pro42 Gold software AC100 or AC400 (quick-mounting) terminals 22” TFT display Jack or inspection-pit version, equipped with a post and electric lift IC index

AC400 terminals

EEWAEU545H2

WHEEL GEOMETRY MEASUREMENTS

NEW

Visualiner V2400 geometry measurement device, PRO42 Platinum software High accuracy and reproductivity of measurements Small individual XD passive discs Basic measurement and regulation procedures Various installation options (inspection-pit, jack, mobile version)

Professional measurements and high performance: - improved camera / passive disk technology – faster, more accurate and sensitive measurements - new smaller and lighter XD passive discs – ergonomics and convenience - AC400 quick-mounting handles – support for wheels up to 99 cm in diameter; the handles do not touch the rims! Made of magnesium alloy – lightweight and durable PRO42 measurement software in the PLATINUM version: - simple and intuitive to use – it provides accurate and quick suspension adjustment and diagnostics - adjustable start-screen - customised set-up of measurement procedure (wizard) - user login – password protection - print-out of individual control reports and inspection forms - diagnosis of ”driver’s complaints”

- diagnosis of vehicle dynamics - rapid measurement and adjustment procedures - measurement of wheel tilting with zero alignment (as required by Mercedes) - EZ-Toe feature to adjust alignment with turned wheels - measurement of basic suspension dimensions - measurement of convergence curves (as required by VW and Audi) - automatic measurement of suspension height - control programmes for various types of suspension - OEM measuring procedures (compliant with the manufacturer’s requirements) - co-operation with the Romes inclinometer - advanced measurement of suspension dimensions (including diagonals) - measurement of rolling wheel radii (including rotational speed variances – differential mechanisms in operation) - measurement and adjustment when wheels are removed - import and export of user databases - service management function - automatic height (location) tracking of vehicle passive discs - VSA (Vehicle Sensitive Alignment) – measurement of relevant parameters (while irrelevant ones are omitted) - measurement and diagnostics of steering asymmetry - advanced measurement of suspension height - Pro Ackerman – advanced steering diagnostics - graphical presentation of advance / tilt of steering axle and turning radius

V2400 Lift geometric measurement device with a manual lift

Pro42 Platinum software AC100 or AC400 (quick-mounting) terminals 22” TFT display jack or inspection-pit version equipped with a post and a manual lift IC index

AC400 terminals

EEWAEU546H2-M

V2400 geometric measurement device Pro42 Platinum software AC100 or AC400 (quick-mounting) terminals 22” TFT display inspection-pit version, wall-mounted cameras IC index

AC400 terminals

EEWAEU546H1

V2400 Lift geometric measurement device with an electric lift

Pro42 Platinum software AC100 or AC400 (quick-mounting) terminals 22” TFT display jack or inspection-pit version equipped with a post and an electric lift IC index

AC400 terminals

EEWAEU546H2

WHEEL GEOMETRY MEASUREMENTS

V3D-ELS Visualiner geometry measurement device

Patented, unique solution for measuring suspension geometry in the full 3D technology. The device is equipped with 2 cameras which read out the position of passive heads mounted on wheels – such measurements are conducted by a roll-over for a short distance (approx. 10–15 cm forwards and backwards), then the device determines the virtual plane of wheel rotation axis, so that it does not require rim runout compensation and makes results surface free from faults related to a non-levelling surface where the car stands. Its software (based in MS Windows) guides the operator step-by-step through the measurement procedure, includes adjustment instructions with a selection of tools and parts, along with 3D animations – the database contains vehicles from all over the world since 1980 (over 100,000 specifications).

INSPECTION - PIT VERSION IC index

JACK AND INSPECTION - PIT VERSION

EEWA541D1-K

IC index

EEWA541D1-W

MOBILE JACK AND INSPECTION - PIT VERSION IC index

EEWA541D1-WW

ACCESSORIES

JOHN BEAN Turntables (2 pcs) dimensions: L 47 cm x W 50 cm +/-0.5 cm, H 50 mm IC index

33260

Fillers

for turntable (2 pcs) IC index

4029542

EVERT Turntable

set of cast-iron mechanical turntables; pressure up to 4 tonnes per axle; (400 x 400 mm), H 38 mm (when equipped with a 50-mm disc), 2 pcs. IC index

JOHN BEAN Roller discs (2 pcs) L 1 m, H 50 mm VAG 1943-2 IC index

4027193

PRECYZJA Roller plate

reinforced, long (1000 mm) with run-ins (plate dimensions: 1000 x 387 x 51.5 mm) IC index

GTOA-045-100

PRECYZJA Roller plate

reinforced, long (1000 mm) (plate dimensions 1000 x 387 x 51.5 mm) IC index

PRECYZJA Roller plate

reinforced (500 mm) with run-ins (plate dimensions: 436 x 387 x 51.5 mm) IC index

GTOA-045

reinforced (500 mm) (plate dimensions: 436 x 387 x 51.5 mm) IC index

GTOA-450

PRECYZJA Roller plate

short (380 mm) (plate dimensions 380 x 280 x 51.5 mm) IC index

JB00005

Plate run-ins

IC index

JB00004

IC index

JOHN BEAN Software

updates, the latest version of the vehicle specification – SB SPECS PRO32 >=3.4 and <= 4.7 or <= 5.6.3 for the following devices: Lite, ELS, Prism

100

GTOA-044

PRECYZJA steering wheel levelling device IC index

4031303

GTOA-038

for the column to the John Bean geometry device

with its elevator and trolley for 3D cameras

IC index

GTOA-450-100

Mobile trolley

Post IC index

PRECYZJA Roller plate

EVERTTURNTABLE-400-CI

GTOA-081

JOHN BEAN Software

updates, the latest version of the vehicle specification – USB SPECS PRO42 for the following devices: V2200, V2300, V2400 IC index

4031587

Electronic angle meter inclinometer IC index

913 009 024

WHEEL GEOMETRY MEASUREMENTS

New generation of geometry measurement devices - 3D technology with two cameras FWA 6620 - Good accuracy and repeatability of measurements - Little space in the workshop is required - Adapted to all car sizes, from Smart to Sprinter - Small requirements as to the size of the workplace. Distance from turntables to cameras min. 1,8m - Small measuring boards - space saving and convenient operation - Fast measurement - compensation by rolling-over the car - High accuracy of beam moving up and down - Strong beam resistant to drafts and shocks (10m/s shock / wind level 10.8-13.8 m/s) - Intuitive user interface The scope of delivery includes: - Good relation: price / quality - universal fixing clamps 4 pcs - The printer is optional - locking of the brake and steering pedals - mechanical turntables 2 pcs - wedge under the wheel 2 pcs

Technical data – range of application

WARNING! For FWA 6620 device two items must be ordered:

Rim size

Column with beam for FWA 6620 Cabinet for FWA 6620

WHEEL SPAN

1100 – 1900 mm

Wheelbase

1800 – 4500 mm

Distance from the column to the centre of turntable

1800 – 2400 mm

(manual beam height adjustment) IC index

1 692 000 020

(fastened to the column, PC, 24” monitor, keyboard, mouse) IC index

1 692 000 021

13” – 25”

Distance between left and right camera

2240 mm

Power

0,72 kW

FWA 6720

- Good accuracy and repeatability of measurements - Little space in the workshop is required - Adapted to all car sizes, from Smart to Sprinter - Small requirements as to the size of the workplace. Distance from turntables to cameras min. 1,8m - Small measuring boards - space saving and convenient operation - Fast measurement - compensation by rolling-over the car - High accuracy of beam moving up and down - Strong beam resistant to drafts and shocks (10m/s shock / wind level 10.8-13.8 m/s) - Intuitive user interface - Good relation: price / quality The scope of delivery includes: - The printer is optional - universal fixing clamps 4 pcs - locking of the brake and steering pedals - mechanical turntables 2 pcs - wedge under the wheel 2 pcs Technical data – range of application

WARNING! For FWA 6720 device two items must be ordered:

Rim size

Column with beam for FWA 6720 Cabinet for FWA 6720

WHEEL SPAN

1100 – 1900 mm

Wheelbase

1800 – 4500 mm

Distance from the column to the centre of turntable

1800 – 2400 mm

(automatic electrical beam height adjustment with a button) IC index

1 692 000 022

(mobile, PC, 24” monitor, keyboard, mouse) IC index

1 692 000 023

13” – 25”

Distance between left and right camera

2240 mm

Power

0,72 kW

FWA 6820

- Good accuracy and repeatability of measurements - Little space in the workshop is required - Adapted to all car sizes, from Smart to Sprinter - Small requirements as to the size of the workplace. Distance from turntables to cameras min. 1,8m - Small measuring boards - space saving and convenient operation - Fast measurement - compensation by rolling-over the car - High accuracy of beam moving up and down - Strong beam resistant to drafts and shocks (10m/s shock / wind level 10.8-13.8 m/s) - Intuitive user interface The scope of delivery includes: - Good relation: price / quality - universal fixing clamps 4 pcs - The printer is optional - locking of the brake and steering pedals - mechanical turntables 2 pcs - wedge under the wheel 2 pcs Technical data – range of application

WARNING! For FWA 6820 device two items must be ordered:

Rim size

Column with beam for FWA 6820 Cabinet for FWA 6820

WHEEL SPAN

1100 – 1900 mm

Wheelbase

1800 – 4500 mm

Distance from the column to the centre of turntable

1800 – 2400 mm

(automatic tracking of tables position) IC index

1 692 000 024

(mobile, PC, 24” and 19” monitors, keyboard, mouse) IC index

1 692 000 025

13” – 25”

Distance between left and right camera

2240 mm

Power

0,72 kW

101

WHEEL GEOMETRY MEASUREMENTS

Geometric control devices in 3D technology FWA 46XX

FWA 46xx belongs to the new generation of suspension geometry measurement and control devices. Your workshop will get measurement results (which can be printed and presented to your customer) in just 7 minutes. The database covers about 20,000 vehicles and can be extended by its user to include further vehicle serial data. Regular updates (as an option) provide up-to-date information on vehicle models. Much reduced preparation time Easy installation of lightweight heads and adjustment of the measuring unit saves your precious time. Quick measurement with a high level of accuracy Rim runout compensation under your car roll-over is fast and on all 4 wheels, with no need to lift the vehicle. A high level of result reproductivity ensures the reliable operation and competence of the repair staff.

FWA 4630 S40

Competence and precision A high level of accuracy is guaranteed thanks to the rim runout compensation when your vehicle drives through. Each and every measurement is conducted in 3D technology using two precision measuring units. The integrated reference system, as well as a pendulum transmitter in each measuring unit for determining the tilt of your vehicle wheel and steering pin, provide reliable, reproducible results.

Built to work hard in the workshop Its robust and ergonomic design is – to the smallest detail – adapted for practical use in the everyday operation of your workshop.

Mobility within the entire station All you have to do is to equip jacks provided for wheel geometry with special measuring-unit grips. In this way, the FWA 46xx unit can be used in the workshop – as needed – on several jacks and on an inspectionpit. Such measuring units may be simply placed on the floor next to your vehicle.

ALU turntable

Passive head

Magnetic grips

FWA 4650 S1 FWA 4630 S40

FWA 4650 S1

SPECIAL OFFER 3D version IC index

Wireless connectivity kit for PC, laptop or tablet co-operation – passive 3D technology

1 690 700 007

IC index

The kit includes: - Bosch trolley, computer, TFT display, colour printer, 4 passive heads, 2 measuring camera sets, messbox, brake pedal and steering wheel locks, software package, European vehicle database (DVD) - 4 universal terminals - 4 sets of caps for universal clamps - 2 ALU mechanical turntables - 4 turntable fillers - 4 wall-mounted grips for clamps and heads - 15-m cable set - two short jack adaptors

FWA 4650 S5 IC index

1 690 700 044

1 690 700 045

4 passive heads, 2 measuring camera sets, WLANBox, brake pedal and steering wheel locks, software package, vehicle data - 4 Multi-Fit fastening clips - 4 sets of clamp caps - 2 ALU mechanical turntables - 4 turntable fillers - 15-m cable set - two short jack adaptors The kit does not include: a trolley, display, magnetic handles.

It is just like the FWA 4650 S1 unit, but additionally includes: - trolley with computer and printer - 27” display - magnetic clamps - trolley cover

Suggested extra equipment:

Set of magnetic grips IC index

1 690 701 051

Passive heads

2 pcs. for the back, for wheelbase > 3.4 m IC index

1 690 701 032

All the models are Vehicle Control Station-certified. 102

WHEEL GEOMETRY MEASUREMENTS

FWA 4455 S5

Geometry with 8 CCD cameras with rollover compensation! Standard equipment: - BOSCH trolley & measuring box - PC, mouse, display, DE keyboard, printer - 4 x Multi-Fit adapters - 2 x ALU mechanical turntables - 4 x turntable fillers - 4 x CCD measuring heads - Nominal data â&#x20AC;&#x201C; Dongle & Licence - Software - Steering wheel lock and brake pedal lock - Wireless data transmission: - Shorter preparation time -> efficiency - Radio data transmission from the head to the measuring box (433 MHz GHZ) - Data transmission from the measuring box to your tablet / PC via Bluetooth (alternatively via USB)

SPECIAL OFFER 1 690 320 123

IC index

Recommended item

Cable set for heads 1 690 401 012

IC index

FWA 4455 S1

The following should be purchased separately for the S1 version:

8-sensor version, wireless transmission, rim runout compensation sensor IC index

4 Multi-Fit fastening clips

1 690 320 106

kit

IC index

1 690 311 112

Mechanical turntables 1 piece

FWA 4450 S1

IC index

8-sensor version, wireless transmission IC index

1 690 320 103

1 690 311 002

ALU turntables IC index

1 690 500 000

All the models are Vehicle Control Station-certified Modular kit designed for operation in workshops which are already equipped with a PC, laptop or tablet (applied radio transmission and Bluetooth communication). Suitable for handling suspensions in passenger cars and light trucks. Highest measurement precision (advanced technology with 8 CCD cameras), low station requirements.

Standard equipment: - 4 measuring heads (8 radio sensors) - 4 charging units with cables - Bluetooth adapter - factory database

Equipment for inspection-pit installation (order doubly):

Long sliding plate 1 piece IC index

1 690 401 004

Sliding plate run-ins 2 pieces IC index

1 690 401 008

Turntable run-ins 1 piece IC index

1 690 701 052

103

WHEEL GEOMETRY MEASUREMENTS

DAS 1000 Calibration kit for FWA 46xx (3D) geometry IC index

1 692 000 011

Only in combination with the appropriate geometry device such as 3D Bosch/Beissbarth and KTS z ESI[tronic] 2.0. Application: general chassis maintenance and post-accident repairs. VAS 6430/1: column with a linear unit and calibration beam VAS 6430/2: ACC/ADR laser for the passive control of radar sensors VAS 6430/3: ACC mirror for the active adjustment of radar sensors VAS 6430/4: calibration table for the adjustment of front cameras VAS 6430/8: column frame on wheels

VAS 6767: software package for FWA 3D with regulatory data and procedures from Volkswagen AG. 3D measuring plates to be mounted on VAS 6430 BAT 430 battery charging rectifier socket wrench for the adjustment of radar sensors socket wrench for the adjustment of radar sensors

DAS 1000 Calibration kit for FWA 44xx (CCD) geometry IC index

1 692 000 013

Only in combination with the appropriate geometry device such as CCD Bosch/ Beissbarth (FWA 4435, 4455, ML 8R Tech+) and KTS with ESI[tronic] 2.0. Application: general chassis maintenance and post-accident repairs. Note: the rim runout compensation is required when lifted! VAS 6430/1: column with a linear unit and calibration beam VAS 6430/4: calibration table for the adjustment of front cameras VAS 6430/2: ACC/ADR laser for the passive control of radar sensors VAS 6430/3: ACC mirror for the active adjustment of radar sensors VAS 6430/4: calibration table for the adjustment of front cameras

SCT 1410

Multi-purpose beam for the extension of DAS 800/1000 in order to mount calibration plates for different car-brands. IC index

1 690 380 100

VAS 6430/8: column frame on wheels VAS 1813: software package for FWA CCD with regulatory data and procedures from Volkswagen AG. BAT 430 battery charger, rectifier socket wrench for the adjustment of radar sensors

SCT 415

Autonomous device for mounting plates for dedicated vehicles (beyond the VW Group). Reference alignment (in relation to the longitudinal middle plane of a vehicle or its suspension) is conducted by means of laser beaming. IC index

1 690 380 120 Plates MB Type 1 Pkw MB Type 2 (Sprinter) + InfinityQ30 MAZDA Type 1 Nissan Type 1 Nissan Type 2 Honda Type 1 Honda Type 2 Honda Type 3 Kia / Hyundai Type 1 Kia / Hyundai Type 2 Kia / Hyundai Type 3 Toyota Type 1 Toyota/Lexus Type 2 Universal Type 1 (kit) Renault, Smart, Infinity

Catalogue No. 1.690.382.312 1.690.382.319 1.690.382.318 1.690.381.139 1.690.381.140 1.690.381.143 1.690.382.297 in preparation 1.690.382.288 1.690.382.320 1.690.382.316 1.690.382.287 1.690.382.328 1.690.381.142

Catalogue No. DEVICES FOR ACTIVE ADJUSTMENT OF RADAR SENSORS FRONT RADAR: ACC 200 For the active adjustment of radar sensors (e.g. for BMW, Fiat) The kit includes: 1 adjustable device with a mirror 1 laser projector, 1 multi-quick wheel handle Many features can also be provided with the DAS 1000 unit For ACC 200: a floor rail (3 m long) DEVICES FOR PASSIVE ADJUSTMENT OF RADAR SENSORS FRONT RADAR: RSAD 100 (Mercedes) for radar sensors storage case with the device and a special adjustment spanner RSAD 100 (Fiat) for radar sensors storage case with the device and a special adjustment spanner RSAD 100 (Chrysler) for radar sensors storage case with the device and a special adjustment spanner

104

0 684 300 103 1 682 319 031

1 690 380 004 1 690 380 005 1 690 380 003

WHEEL GEOMETRY MEASUREMENTS

MODERN DEVICE FOR ADJUSTMENT OF MAGNETI MARELLI C 880 GEOMETRY 3D TECHNOLOGY WITH LIVE VIEW CAMERAS

KEY FEATURES AND FUNCTIONS - Up/down camera-moving lift for comfortable operation equipped with a jack (as an option) - Measurement of roll-over wheel compensation by 30° - High-quality 3D camera system that self-adjusts to outdoor lighting conditions - 4-point handles (size: 11” up to 25”) with passive discs made of resistant materials - Column-mounted main unit (PC) (equipped with a keyboard and printer shelf ) - Italian design - PC (Windows 7). Professional geometry adjustment software and international vehicle database - Quick and easy inspection of wheel adjustment parameters TECHNICAL DATA - Can be used with only two screens (front measurements) - overall convergence +/-20°. - Multi-brand database containing more than 15000 vehicles - angle of tilt +/-10° - Feature to introduce new vehicles into the database - angle of pin tilt +/-30° - Wall-mounted bracket and passive screen mount kit - angle of pin advance +/-30° - User-friendly programme guides you through - tilt of driving axle from vehicle axle +/- 22° all step-by-step features - angle of angle shift +/- 22° - Programme operation in quick mode (with 2 keys only) - angle of turn +/- 35° - Two mechanical turntables with adaptors for compensation - supply voltage: 230V/50-60Hz/1Ph - Mobile trolley for handles and passive screens (as an option) - temperature range -5°C to +40°C - Camera-assisted entry assistant (as an option) - humidity 20% to 80%

C 880 Geometry

2 electronic cameras (fixed position, vertically adjustable) 1 column 1 keyboard and printer table 1 PC cabinet 2 front discs + 11”–21” handles (+ adapter-extension up to 25”, with double-profiled claws) 2 rear discs + 11”–21” handles (+ adapter-extension up to 25”, with double-profiled claws) 1 set of wall brackets for hanging discs and clamps 2 wall-mounting kits for wall brackets 1 brake lock 1 steering wheel lock 2 mechanical turntables + plastic washers for easier vehicle rolling-over compensation database and software (CD) 1 operating manual 1 spare parts list 1 spare parts list No computer, display, printer provided IC index

007960009905

C 880 TILT

C880 W

C 880 TILT Geometry with rotating cameras (instead of a lift), complete, suitable for a jack or inspection-pit

C 880W Geometry mounted to the wall (without computer, printer and display)

IC index

007960010020

IC index

C 880 Geometry complete jack version IC index

007960010010

C 880 Geometry complete inspection-pit version

007941000211

IC index

007941000212

ACCESSORIES

System

for the automatic change of camera position for the C880 Geometry (as an option) IC index

007960009910

Computer

adapted to work with C800 and C880 (007960009765) Geometry IC index

007960001230

Monitor

colour display 18.5” LCD IC index

007960001240

Trolley

for geometry adjustments (mobile version) IC index

007936341000

Trolley

for C880 terminals (as an option) IC index

007960009920

Colour printer

adapted for use with MM Geometry IC index

007960001250

105

WHEEL GEOMETRY MEASUREMENTS

GTL TRUCK STANDARD, PROFI (CCD)

Microprocessor-laser or computer-based device for the diagnostics of truck wheel geometry with CCD cameras and ruler kits for Regional Vehicle Inspection Station. ITS CERTIFICATE. (The price includes: clamps, turntables and rulers).

GTL TRUCK STANDARD GTL TRUCK PROFI IC index

GTL-320-000

IC index

PREC GTL-TRUCK-PROFI/SKP

TRUCK ECO

TRUCK ECO STANDARD

(mounted on the wall) IC index

PREC TRUCK ECO STANDARD

Truck ECO COMPACT (mounted on the trolley) IC index

PREC TRUCK ECO COMPACT

ACCESSORIES External display INDEX IC: GTLA-053-000) Compensation plate (INDEX IC: GTLA-100-140) Truck turntable INDEX IC: GTLA-063-000)

106

NEW

ITS CERTIFICATE Laser-mechanical device for the geometry control of truck wheels (The price includes: clamps, turntables and scales)

WHEEL GEOMETRY MEASUREMENTS

PROGEO 3D – STANDARD

NEW

(measuring beam with a floor-mounted column) Equipment: mobile or fixed camera system. Computer set (DELL) – computer, keyboard, 22” display, mouse, MS Windows 7. Printer, 4 passive screens, application software plus factory database (CORGHI) + hardware spanner, 4 mounting terminals 10”–25”, 2 mechanical turntables – expanded, strengthened with a disc diameter of 366 mm, brake spacer, steering wheel lock and DTR. ITS CERTIFICATE

Version with a lift IC index

PROGEO-3D-ST-W

PROGEO 3D – MOBILE

NEW

(measuring beam with a trolley-mounted column, suitable to be operated at several measuring stations) – equipped as specified above

Version with a lift IC index

PROGEO-3D-MO-W

Version without lift IC index

PROGEO-3D-MO

Version without lift IC index

PROGEO-3D-ST

GEOTEST 60 PLUS – RADIO (CCD)

The device is equipped with 8 CCD cameras. Types of compensation: by vehicle roll-over, on lifted car wheel or a single wheel. Measurement of vehicles with spoilers and of post-accident vehicles. The GEOTEST 60 PLUS unit contains the AUTODATA factory database. ITS CERTIFICATE (The price includes 20” clamps, turntables and display) IC index

PREC GEOTEST60PLUS

NEW

ACCESSORIES roller plate (IC index: GTOA-038) mechanical turntable (IC index: GTOA-034) filler (IC index: GTOA-340) extended turntable run-in (IC index: GTOA-080) fastening clamp 12”-24” with double-sided paws (IC index: GTOA-033)

GTO LASER

Laser-mechanical device for the geometry control of wheels ITS CERTIFICATE (4-head version) (The price includes: 20” terminals, turntables).

GTO Laser (base) IC index

GTO2-800

GTO Laser (2 head – hanging version) IC index

GTO2-810

GTO Laser (2 head – on-cabinet version) IC index

GTO2-830

GTO Laser (4 head – hanging version) IC index

GTO4-820

GTO Laser (4 head – on-cabinet version) IC index

GTO4-840

ACCESSORIES short roller plate (IC INDEX: GTOA-038) roller plate base (IC INDEX: GTOA-044) mechanical turntable run-in (IC INDEX: GTOA-052) GTO PC programme (IC INDEX: GTOA-GTO-PC)

107

DIAGNOSTIC LINES

Light adjustment devices Light control and adjustment device

SPECIAL OFFER

Light control and adjustment device

Mirror positioning, analogue lux and candela gauge. IC index

Laser positioning, digital lux and candela gauge, RS232 connector.

0XPT2019/K

IC index

Light control and adjustment device

Mirror positioning, digital lux and candela gauge.

Mirror positioning, digital lux and candela gauge. IC index

0XPT2800

0XPT2029/D/K/L2

IC index

0XPT2066/D

Vehicle light adjustment and intensity measurement device USP-20 type This optical device allows for measuring the luminous intensity of all types of vehicle lights and supports their adjustment. It is equipped with a photometric head, which makes it possible to measure the light intensity (or the light volume) of high and low vehicle beams.

IC index

FUDIM/USP-20PS

IC index

The HTD 615 unit is a fast and reliable light adjustment device based on photodiodes and intended for reliable testing and evaluation of all popular headlamp types. The operator is guided through the entire testing process through visual and acoustic messages and signals. Its adjustment is conducted reliably under laser technology and fast microcontroller control. It supports the following types of lights: Xenon, LED, Halogen IC index

1 692 104 324

HTD 815 NG Light adjustment device

Provided with the MATRIX/LED software, it supports Xenon, LED and Halogen lights.

108

Construction details The device consists of a head (with a photometric system) retrofitted with a slider, columned trolley and a referencing projector (depending on its type): PS – light referencing projector PLA – laser referencing projector PLU – mirror referencing projector

FUDIM/USP-20PLA

HTD 615 Electronic light control and adjustment device

POLISH PRODUCT

IC index

FUDIM/USP-20PLU

HTD 815 Digital light adjustment control: quick and accurate

The HTD 815 unit is a light adjustment device based on a CMOS camera and intended to test all popular headlamp types quickly and precisely with the guarantee to support light systems in the future. The unit has an automaticallypiloted programme and manually-selected features for adjustment operations. It is robust and designed for operation in a car workshop. Its measurement process is fast and accurate thanks to the application of a highquality optical system and laser technologies. It supports the following types of lights: Xenon, LED, Halogen IC index

1 692 104 326

IC index

1 692 104 328

NEW

OFFER SDL 4341 Diagnostic line with a jerker to test vehicles with their gross weight up to 3.5 t

SDL 4341 Diagnostic line

It is intended for the comprehensive testing of vehicle chassis with a gross weight up to 3.5 t. All components in the line are compatible with a Windows-based PC. Data is microprocessorprocessed under the BNET (Beissbarth-Network serial bus system) technology. The SDL 4341 diagnostic line kit for Vehicle Inspection Station includes: control cabinet with PC set, monitor, printer set of rollers for brake tests (BSA 4341) testing kit for 4x4 vehicles (by reversing the direction of right-side rollers to left-side rollers) electro-magnetic brakes to block all four rollers (making it easy to get in and out of them) SDL 430 shock absorber tester SDL 415 pass-through wheel pre-alignment plate foundation frame for wheel pre-alignment plate infrared remote control motorcycle testing add-on brake pedal pressure gauge

Offer 1) SDL 4341 line with its control cabinet within the specified kit range for Vehicle Inspection Station: 2) Extra framed hydraulic jerker. We recommend the following additional equipment: Hinged roller covers (hot-dip galvanized) Foundation frame for rollers and shock absorbers Diagnostic-line bathtub

DIAGNOSTIC LINES

DIAGNOSTIC LINES FOR VEHICLE CONTROL STATIONS

FROM A CONCEPT TO A NEW OPERATIONAL VEHICLE CONTROL STATION

When planning to set up VEHICLE CONTROL STATION, you (the investor) must take into account a variety of requirements which must be fulfilled. Our experience allows us to assess and advise you on how to meet not only the technical but also the formal and legal requirements.

Within the scope of cooperation, depending on your needs, we provide: - equipment for your basic or regional vehicle control station - technological documentation on your vehicle control channel and arrangement of CARTEC Vehicle Control Station in Oława all its required equipment and media - advisory assistance for you (the investor) in the form of the selection of the contractor and the evaluation of submitted offers - consultation and supervision over works during the construction phase - consultation and assistance for acceptance procedures, including obtaining the so-called “attestation of conformity” for official Control Stations

Vehicle Control Station in Olesno

Vehicle Control Station in Ostrołęka

Vehicle Control Station in Rzyki

Our knowledge of the practical application of technologies, technical testing and vehicle services allow us, in cooperation with the investor, to go through the process of erecting vehicle control stations until their completion. Thanks to more than twenty years of experience we may create any offer which is tailored to your individual needs and the parameters of the new facilities. Starting at the design stage, we provide our client with the most suitable equipment required for a Vehicle Control Station, thanks to which we avoid unnecessary costs and prolongation of investment implementation.

NEW DIAGNOSTIC LINE ON SALE NOW! - The Videoline RP stands for a higher level of testing quality which takes into account a diagnostician’s experience and expertise as well as legal technological and commercial requirements. - This new diagnostic line is an extension of the product line applied at basic Vehicle Control Stations, which has enjoyed a good reputation on the Polish market for many years. - It is equipped with a brake testing module which is its key unit while a vehicle suspension vibration damping module and wheel alignment control module are extra units which may be incorporated into the line at a later date. - The RP line has the latest software (Visualization 0.7.4) which at any time allows for the quick and troublefree adaptation of software to changing requirements. - The standard unit includes an automatic module for detection and testing of 4x4 vehicles. - It can be extra equipped with a pneumatic roller lift system for testing sports car brakes, vehicles with low suspension and up to 3.5 t with integrated axles e.g. trailers, tow trucks. - The Videoline RP is an optimal line for Authorised Vehicle Service Centres as well as independent workshops. Its features: vehicle diagnostics and a clear printout that make tests even more transparent. - Thanks to the modular design it is possible to incorporate further line components in the future. - Complete vehicle diagnostics can be conducted through a fully automated series of tests while all testing modules (brake diagnostics, vehicle suspension vibration damping and wheel alignment control) are activated automatically. - A short testing time (two to three minutes) also means its increased performance, thus profitability of your station.

110

DIAGNOSTIC LINES

WORKSHOP DIAGNOSTICS Diagnostic line for workshop [workshop version] This Cartecâ&#x20AC;&#x2122;s new RECEPCJA diagnostic line consists of a roller station for testing vehicle braking systems (204-RP), shock absorbers testing stations (FWT 202-E) and alignment plate (SSP 204) for vehicles with a gross weight up to 3.5 t. Its mechanism is completely galvanised. All unit modules in the line are operated via remote control. The device allows for the automatic detection and testing of 4x4 vehicles as well as automatic assistance at their exit. OPTIONS: soft start module for the smooth start-up of rollers, pneumatic beam for vehicle lifting, motorcycle overlay, brake pedal pressure gauge. The RECEPCJA PLUS diagnostic line consists of a roller station for testing vehicle braking systems (204-RP E) and a station for shock absorbers (FWT 202-E). Both modules are controlled via a wireless remote 1control included in the kit.

IC index: CARTEC RECEPCJA PLUS

IC index: CARTEC RECEPCJA

The unit is also available in the shared version.

Roller station for testing braking systems in vehicles with a gross weight up to 3.5 t - 204-RP [full workshop version] The unit includes two sets of brake rollers made using composite technology, a control and power switchboard with wireless controller, a central control unit for the new RP Visualization 0.7.4. software, cabinet (with PC, monitor and printer) and wireless remote control. OPTIONS: soft start module for the smooth start-up of rollers, pneumatic beam for vehicle lifting, motorcycle overlay, brake pedal pressure gauge.

IC index: 204-RP W

Station for testing shock absorbers in vehicles with a gross weight up to 3.5 t - FWT 202-E [full workshop version, for cooperation with the 204-RP unit] This unit assures the flawless assessment of shock absorber performance with no knowledge about the vehicleâ&#x20AC;&#x2122;s technical specifications. It also allows for assessing the performance of shock absorbers via the included PC software and is equipped with an integrated wheel load measuring module.

IC index: FWT 202-E This device is also available in shared and stand-alone versions.

Roller station for testing braking systems in vehicles with a gross weight up to and over 3.5 t BDE 3504W [workshop version - its completion does not meet the ITS/TDT certification requirements] This device can be used in car workshops and production plants (truck and bus production facilities). It is characterised by high wear-resistance and a very high quality of workmanship. The unit includes: 1. Two sets of CARTEC BDE 3504 brake rollers equipped with: - DMS strain gauge measuring system - moisture- and water-proof engines - non-abrasive rollers (coated with quartzite aggregate) 2. LED display with measuring dials and control lights 3. Control and power-supply cabinet 4. Central control unit (PC/Windows, with CARTEC BDE software in Polish, monitor, printer, mounted in a cabinet) 5. Wireless remote control

IC index: BDE 3504W It is also available with its maximum allowable axle load at 16 t or 20 t.

111

DIAGNOSTIC LINES

JERKERS Hydraulic wheel jerking device for vehicles with a gross weight up to 3.5 t SHC 2300N (for car workshops and vehicle control stations). IC index: SHC 2300N

IC index: SHC 2300N 8-way

Hydraulic wheel jerking device for vehicles with a gross weight up to and over 3.5 t DMC SHC 4500N (for car workshops and vehicle control stations). IC index: SHC 4500N

IC index: SHC 4500N 8-way

IC index: SHC 4500NW

IC index: SHC 4500NW 8-way

(W - reinforced construction)

As a standard, CARTEC jerkers come with a wireless remote control. NOTE: You will receive our special discount when ordering any jerker with the CARTEC diagnostic line. Pneumatic wheel jerking device for vehicles with a gross weight up to 3.5 t S-Cartec 2 (for car workshops). IC index: S-CARTEC 2 It is also available in the jack version.

ANALYSER DGA1500 exhaust gas analyser with SUN opacimeter The DGA 1500 unit, following the development of technology in the automotive industry, is a modern diagnostic tool for both spark and diesel engines. It meets the latest European MID requirements for the highest accuracy class. Available in 4- or 5-gas versions (NOx option). It runs in the official and continuous measurement mode. Warm-up time: <5 minutes at 20 Â°C.

IC index: DGA 1500 COMBI

ACCESSORIES Free-running CARTEC rollers up to 3.5 t Permissible axle load - 4 t For tests on 4x4 vehicles

Free-running CARTEC rollers up to 6.2t Permissible axle load - 6.2 t For tests on 4x4 vehicles

IC index: FREE-RUN ROLLERS 3.5 T

IC index: FREE-RUN ROLLERS 6.2 T

CARTEC Geometry-lockable expansion plate Permissible load - 1t IC index: CARTEC PLATE

CARTEC Roller-lifting station device Permissible axle load - 4 t IC index: ROLLER-LIFTING DEVICE Cena netto: 4 700 â&#x201A;Ź/kpl

Universal set for 3D geometry consisting of turntables, lockable expansion and in-run plates. Ideal to run geometry on your vehicle control channel. It reduces the time required to make adjustments as lifting the vehicle is not necessary in order to place turntables and expansion plates under wheels. IC index: CARTEC 3D KIT

112

TYRE CURING Tyre changers for passenger vehicles:

Power supply

Table rotational speed

Outer rim mounting

TCE 4420 S43

Inner rim mounting

TCE 4420 S43 automatic tyre changer for passenger vehicles with TCE330 auxiliary column and MICHELIN wheel pumping gun.

Wheel diameter and width

Tyre changers for trucks:

Power supply

Rotation speed

No. of arms

Inner rim mounting

Inner rim Max wheel mounting width with adapters applied

IC index

1 694 100 196

3 x 400 V

7 1/min

Max wheel diameter

1000 mm

Balancers: Manual data input Max wheel weight

Max wheel diameter and width

Rim width and diameter

TCE 4550

12”–23”

TCE 4490 with TCE 330 arm and TLL 130 automatic head. Central mounting, 2 lifts, Ergo Control. IC index

1 694 100 491

1200 mm

1 694 100 489

230 V

7–15 1/min

12”–30”

230 V

7–15 1/min

13”–32”

TCE 4495

MS 500 V1

TCE 4495 with an inflator, TCE 330 arm and TLL 130 automatic head. Central mounting, 2 lifts, Ergo Control.

Equipped with extra Tecnoroller arm. With a pneumatically reverse-swivelable column. One operational speed.

1 694 200 922

1 694 100 490

1200 mm

IC index

1000 mm

IC index

7 1/min

10”–20”

12”–23”

3”–11”

230 V

TCE 4400-22

13”–32”

TCE 4400-22 S44

With a pneumatically reverse-swivelable column. One operational speed.

Equipped with extra TCE 330 arm. With a pneumatically reverse-swivelable column. One operational speed.

1 694 100 461

IC index

1 694 100 469

1000 mm

IC index

7–15 1/min

3 x 400 V

7 1/min

10”–20”

12”–25”

3”–11”

1000 mm

3 x 400 V

3”–10”

TCE 4490

This top-of-the-line model made by Bosch is ideal for servicing tyres of all types, both for passenger cars and delivery vans. This unit provides high speed operation as well as simple and precise control. Being the high-speed model, it is equipped with a variety of features: it is designed for the removal and fitting of standard and low-profile tyres, RFT, PAX tyres up to 30” of their rim diameter and 22” of their widths with no need to use a tyre lever. IC index

10”–20”

1200 mm

Rpm

3 x 400 V

7 1/min

10”–22”

12”–25”

3”–11”

113

TYRE CURING

TCE 4470 S44 Ergo Control

TCE 4475 S44 Ergo Control

Automatic tyre changer under the new Fenice concept / 2 speeds / TCE 330 arm / Ergo Control Arm

1 694 100 396

1 694 100 398

7–15 1/min

12”–28”

13”–32”

3–15”

230 V

TCE 4470 S44 Ergo Control

12”–28”

13”–32”

3–15”

TCE 4475 S44 Ergo Control

Automatic tyre changer under the new Fenice concept / 2 speeds / TCE 330 arm / Ergo Control Arm

Automatic tyre changer under the new Fenice concept with an inflator / 2 speeds / TCE 330 arm / Ergo Control Arm

1 694 100 397

IC index

1 694 100 399

1200 mm

IC index

7–15 1/min

12”–28”

13”–32”

3–15”

230 V

TCE 4430-24 S44 Ergo Control

Equipped with extra TCE330 arm. Unique body concept with the G-frame. With a pneumatically reverse-swivelable column. Two working speeds. Equipped with extra TCE 330 auxiliary arm. Ergo Control version.

1 694 100 530

12”–28”

13”–32”

3–15”

TCE 4435-24 S44 Ergo Control

Equipped with extra TCE330 arm. Unique body concept with the G-frame. Integrated unit used for the quick pumping of tyres by means of jaws. Two working speeds. Equipped with extra TCE 330 auxiliary arm. Ergo Control version. IC index

1 694 100 532

1200 mm

IC index

7–15 1/min

1200 mm

3 x 400 V

1200 mm

230 V

1200 mm

IC index

1200 mm

IC index

Automatic tyre changer under the new Fenice concept with an inflator / 2 speeds / TCE 330 arm / Ergo Control Arm

7–15 1/min

10”–24”

12”–28”

3–12.5”

TCE 4430-24 S44 Ergo Control

1 694 100 531

7–15 1/min

10”–24”

12”–28”

3–12.5”

TCE 4435-24 S44 Ergo Control

1 694 100 533

1200 mm

IC index

230 V

3 x 400 V

114

7–15 1/min

10”–24”

12”–28”

3–12.5”

1200 mm

230 V

3 x 400 V

7–15 1/min

10”–24”

12”–28”

3–12.5”

TYRE CURING

TCE 4470 S44

TCE 4475 S44

Automatic tyre changer under the new Fenice concept / 2 speeds / TCE 330 arm

1 694 100 384

1 694 100 386

7–15 1/min

12”–28”

13”–32”

3–15”

230 V

TCE 4470 S44

12”–28”

13”–32”

3–15”

TCE 4475 S44

Automatic tyre changer under the new Fenice concept / 2 speeds / TCE 330 arm

Automatic tyre changer under the new Fenice concept with an inflator / 2 speeds / TCE 330 arm

1 694 100 385

IC index

1 694 100 387

1200 mm

IC index

7–15 1/min

12”–28”

13”–32”

3–15”

3x400 V

TCE 4430-24 S44

Equipped with extra TCE330 arm. Unique body concept with the G frame. With a pneumatically reverseswivelable column. Two working speeds. Equipped with extra TCE 330 auxiliary arm.

1 694 100 504

12”–28”

13”–32”

3–15”

TCE 4435-24 S44

1 694 100 506

1200 mm

IC index

7–15 1/min

10”–24”

12”–28”

3–12.5”

230 V

TCE 4430-24 S44

10”–24”

12”–28”

3–12.5”

TCE 4435-24 S44

Equipped with extra TCE330 arm. Unique body concept with the G-frame. With a pneumatically reverse-swivelable column. Two working speeds. Equipped with extra TCE 330 auxiliary arm.

1 694 100 505

IC index

1 694 100 507

1200 mm

IC index

7–15 1/min

3x400 V

7–15 1/min

10”–24”

12”–28”

3–12.5”

1200 mm

230 V

1200 mm

3x400 V

1200 mm

230 V

1200 mm

IC index

1200 mm

IC index

Automatic tyre changer under the new Fenice concept with an inflator / 2 speeds / TCE 330 arm

3x400 V

7–15 1/min

10”–24”

12”–28”

3–12.5”

115

TYRE CURING

ADDITIONAL EQUIPMENT

Seatable jaws

for motorcycle wheels for TCE 422x, TCE 432x and TCE 442x (4 pcs.) IC index

1 695 105 438

IC index

Seatable jaws

IC index

1 695 105 441

IC index

Special mounting cap

1 695 106 190

1 695 103 252

IC index

1 695 103 210

IC index

1 695 101 608

116

1 695 042 877

1 695 900 002

Cover

WDK certified

1 695 103 905

1 695 106 670

IC index

Mounting tyre lever

for TCE 3xx

IC index

for Eurodainu Michelin, for pumping

IC index

Extra pressure cone

40–125 mm

Inflating gun

with an extra arm for TCE 422x

1 695 105 908

Centring cone

1 695 105 191

TCE 200 auxiliary column

with swivelable 8-hole pins for centrally-holed rims (for TCE 4540)

IC index

1 695 653 449

Flange

1 695 105 442

for rims

(88–132 mm)

1 695 106 262

(stamper) for TCE 446x

Plastic protector

Centring cone

for light trucks (for TCE 4540)

1 695 103 261

Adapter for motorcycle wheels IC index

for head fingers

Wheel mounting kit

IC index

Plastic cap

”plastic” type, for motorcycle wheels

IC index

for extra pressure (flat tyre lever)

(stamper) for TCE 422x, TCE 432x and TCE 442x

1 695 103 216

1 695 105 439

Auxiliary support

Adapter for motorcycle wheels

for extra pressure (high tyre lever)

IC index

1 695 105 440

for TCE 446x

Support auxiliary IC index

for motorcycle wheels for TCE 446x

Roller bed

for scooter wheels for TCE 446x IC index

Seatable jaws

for scooter wheels for TCE 422x, TCE 432x and TCE 442x (4 pcs.)

IC index

1 695 105 190

Plastic cover

for centring cones 40–125 mm IC index

for mounting heads

1 695 106 671

IC index

Cover kit

for TCE 100 mounting heads IC index

1 695 106 589

1 695 102 725

Plastic tyre lever (support for TCE 100) IC index

1 695 107 027

TYRE CURING

Motorcycle tire changer

NEW

type M806, equipped with dedicated demounting head and jaws for service motorcycle wheels diameter 6-24”, width 3-12”.

Semi-automatic with manual sideways arm swivelling and manually lowered and lockable head. IC index

EVERTLC890S

1250 mm

EVERTBP806

960 mm

IC index

LC890S tyre changer

6”-24”

3”-12”

3 x 400 V

LC890S tyre changer

Semi-automatic with manual sideways arm swivelling and manually lowered and lockable head. Equipped with an additional pneumatic arm for low-profile and run-flat tyres.

10”–20”

12”–23”

3–15”

885ITA-2 tyre changer

Automatic unit, 2 rotational table speeds, equipped with pneumatic reverse-swivel arm and pneumatic head-locking features. IC index

EVERT885ITA-2

EVERTLC890S+PL240

1250 mm

IC index

7 1/min

10”20”

12”–23”

3–15”

3 x 400 V 7–13 1/min

885ITA-2 tyre changer

12”–23”

3–12”

BP870N tyre changer

With extra arms for low-profile and run-flat tyres, 2 rotational table speeds, equipped with pneumatic reverse-swivel arm and pneumatic head locking features.

Semi-automatic unit, manual sideways arm swivel, manual head lowering and locking; 12”–23” (mounted externally), 10”–20” (mounted internally), 400V/3PH power supply. IC index

EVERT885ITA-2+390

EVERTBP870N

1040 mm

IC index

10”–20”

12”–24”

3–12”

3 x 400 V 7–13 1/min

BP887ITN tyre changer

Automatic unit, 2 rotational table speeds, pneumatic reverse arm swivel, pneumatic head locking, 12”–23” (mounted externally), 10”–20” (mounted internally), 400V/3PH power supply.

EVERTBP887ITN-2

14”–25”

3–13”

BP887ITNS+390 tyre changer

NEW MODEL. Equipped with an auxiliary frame for run-flat tyres. Automatic tyre disassembly head with no conventional tyre lever required. IC index

EVERTBP887ITNS/390

1100 mm

IC index

12”–22”

3 x 400 V 7–13 1/min

11”–24”

13”–26”

3–14”

1100 mm

3 x 400 V 7–13 1/min

1000 mm

3 x 400 V

1040 mm

400 V

3 x 400 V 7–13 1/min

11”–24”

13”–26”

3–14”

117

TYRE CURING

Tyre changer – UNI-ROB series

Tyre changer – ”Ola” series

This unit is equipped with the lever-free tyre mounting system. The machine is equipped with a pneumatic lift which facilitates working with heavy wheels. It is ideal for use with harsh low-profile and run-flat tyres.

It is designed for the assembly and disassembly of tyres in passenger vehicles and vans. Its simple, robust construction and sideway-swivelled frame save space in your car workshop. Single-speed version. IC index

UNITROL OLA2

IC index

UNITROL UNI-ROB

3 x 400V

7–14 1/min

3 x 400V*

7 1/min

10’’–20”

13’’–23”

1070 mm

* 230-V version may be ordered if required

15”

Tyre changer – ”Janka” series

13’’–26”

15”

Tyre changer – ”Janka” series

The new JANKA tyre changer is equipped with a two-position extended- range table (max rim diameter – 580 mm). Its reinforced frame construction and specially-profiled beadbreaker disc ensure reliable and safe wheel operation. IC index

10–30”

UNITROL JANKA

IC index

3 x 400V*

7 1/min

10’’–23”

13’’–26”

1070 mm

* also available in the 2-speed version

1070 mm

* also available in the 2-speed version

UNITROL JANKA K

15”

3 x 400V*

10’’–23”

13’’–26”

15”

Optional equipment Quick-exchangeable foot system

Tyre changer – ”Janka” series

The new JANKA tyre changer is equipped with a two-position extended- range table (max rim diameter – 580 mm). Its reinforced frame construction and specially-profiled bead-breaker disc ensure reliable and safe wheel operation. IC index

7 1/min

(metal/plastic)

UNITROL JANKA KK

1070 mm

* also available in the 2-speed version

3 x 400 V*

7 1/min

10’’–23”

13’’–26”

Head roller cover

for tyre changer jaws (1 pc) for ALU wheels, for Janka and Ola models

UNITROL 06.05.008

Tyre curing spreader IC index

UNITROL W-R-1

ACCESSORIES

Plastic jaw cover

prevention against scratching of an individual rim by any tyre changer foot IC index

15”

IC index

Overlay

1 per tyre changer jaw mounting for motorcycle wheels IC index

118

UNITROL 06.05.003

UNITROL T-NAK-WM

Foot guard

(prevention against scratching of an individual rim by any tyre changer foot) IC index

UNITROL 0001

Attachment for ”KOLEŚ” K3 low-profile tyres IC index

UNITROL K3

TYRE CURING

ACCESSORIES

Tyre curing compass IC index

Overlay

made of plastic, for bead breaker spoon, prevents scratching of ALU wheels

UNITROL T-CYR-001

IC index

Tyre curing compass IC index

Grip

EVERTZT5508032

HAWEKA quick-mounting model, diameter 40 mm, for EVERT balancers, equipped with a mm roller IC index

Overlays

on jaws, for EVERT personal-vehicle tyre changers (set of 4 pcs.) IC index

TC-20-6200000

Protective overlay

mounted on the head, made of plastic, for EVERT truck tyre changers (Angular)

C-54-8000007

IC index

Adapter

for motorcycles, for EVERT tyre changers: CB6x and BP6x series IC index

TB-M-0900000

C-M-0100000

Grip for rims

with no central hole for EVERT CB66, 67, 68 tyre changes (with 40-mm internal diameter) IC index

C-54-1300014

Adapter

used for handling motorcycle wheels (4 pcs. in the kit), for EVERT tyre changers (EVERTLC890S; EVERT885ITA-2, EVERTBP870N) â&#x20AC;&#x201C; 4 pcs. required for the unit IC index

C-54-8000005

Protective overlay

on the head, made of plastic, for EVERT truck tyre changers (Flat) IC index

TB-K-0200000HWK

Overlays

made of plastic, on jaws, for the EVERTLC590/ EVERTBP590 truck tyre changer IC index

EVERTA5509018

Manual tyre changer for truck wheels IC index

0XTY040

B-W-0700000

Column lift

used to lift wheels, mobile model which can be extended with a door mounting handle IC index

EVERT3473

Tyre spreader

360 rotary handle, adjustable range, 4 adjustable thrust levels. IC index

EVERTBJM275

119

TYRE CURING

TCE 5335

TCE 5330

Remote-controlled. For trucks, buses, construction and agricultural vehicles. Two working speeds. Six-jaw grip. IC index

3 x 400 V

For trucks, buses, construction and agricultural vehicles. Two working speeds. Six-jaw grip.

1 694 100 090

4,5 1/min i 9 1/min

IC index

14”–42”

56”

1300 mm

2300 mm

TCE 5320

3 x 400 V

14”–42”

56”

1300 mm

2300 mm

14”–42”

14”–52”

910 mm

2300 mm

For trucks, buses, construction and agricultural vehicles. Two working speeds. Four-jaw grip.

1 694 100 074

4,5 1/min i 9 1/min

4,5 1/min and 9 1/min

TCE 5310

For trucks, buses, construction and agricultural vehicles. Two working speeds. Four-jaw grip. IC index

3 x 400 V

1 694 100 032

IC index

14”–42”

56”

1300 mm

2300 mm

3 x 400 V

1 694 100 029

4,5 1/min i 9 1/min

TCE 5210

For trucks and buses. One operational speed. Four-jaw grip. IC index

3 x 400 V

1 694 100 026

6 1/min

14”–26”

Extension kit

for 56” claws, for TCE 5310 and TCE5320 IC index

1 695 301 710

Set of adapters

for Caterpillar, for TCE 533x IC index

120

1 695 301 606

800 mm

1640 mm

ADDITIONAL EQUIPMENT

Cover kit

for ALU claws, for TCE 5310 and TCE 5320 IC index

1 695 301 711

Set of adapters

for thick-walled rims, for TCE 5310 and TCE 5320 IC index

1 695 301 782

Aluminium covers for jaws, for TCE 5210 IC index

1 695 400 139

Set of adapters

for a central hole from 80 mm, for TCE 5310 and TCE5320 IC index

1 695 301 781

TYRE CURING

Tyre changer

Nitrogen generator

for truck wheels (LC588), weight: 561 kg, power: 1.8 kW IC index

(red colour), power with 6–10 bar compressed air, content of generated nitrogen: 95–99%, capacity: 58 l/min, max nitrogen pressure: 7 bar, 50-l tank, LED display.

EVERTLC588

EVERTNI36

1500 mm

IC index

3 x 400 V

6 1/min

14”–26”

760 mm

Tyre changer

for truck, agricultural and off-road vehicle wheels (LC590), weight: 987 kg, two rotational speeds. Power: 2.4/3.0 kW. IC index

EVERTLC590

EVERTBP588S tyre changer

for truck vehicle wheels, heavy-duty bi-directional engine and hydraulic drive, self-centring grip, hydraulic run-in for easy tyre centring, single arm for stability, powerful compression spindle, aluminium wheel overlays Technical data: power supply: 400 V, pump power: 1.5 kW, transmission power: 1.8 kW working pressure: 130–150 bar; noise up to 75 dB; weight 585 kg

3 x 400 V 4.2–8.5 1/min 14”–56”

1500 mm

EVERTBP588S

2200 mm

IC index

1100 mm

3 x 400 V

Balancer

for truck and van wheels (CB460), max wheel weight: 200 kg, engine power: 0.55 kW IC index

EVERTCB460

6 1/min

14”–26”

760 mm

EVERTBP590 tyre changer

for truck, agricultural and off-road vehicle wheels, powerful bi-directional engine and hydraulic drive, universal 4-jaw grip, 2 rotational speeds in both directions, portable control unit, pressure hydraulics, operational arms with a quick-rotation system, powerful compressor spindle, tyre lever and clamp, aluminium rim overlays Technical data: power supply: 400 V, pump power: 1.5 kW, transmission power: 2.4 kW working pressure: 130–150 bar; noise up to 75 dB; weight: 987 kg

100/200 1/min

200 kg

500 mm

2200 mm

EVERTBP590

10”–24”

1200mm

IC index

1,5”–20”

3 x 400 V 4.2–8.5 1/min 14”–56”

1100 mm

121

TYRE CURING

Tyre changers – UT-27 series

Designed for the assembly and disassembly of truck, agricultural and construction machinery tyres on steel and aluminium rims. Its self-centring handle is operated by a high-pressure hydraulic system. Two-speed version. IC index

3 x 400 V

UNITROL UT-27

6–12 1/min

14”–27”

–

780 mm

1600 mm

Tyre changers – AT-26 series

3 x 400 V

UNITROL AT-26

6–12 1/min

14”–26”

–

820 mm

1640 mm

Tyre changers – UT-56 series

3 x 400 V

UNITROL UT-56

6–12 1/min

14”–56”

–

1065 mm

2300 mm

AT-56 tyre changer

This unit is designed and constructed for the assembly and disassembly of truck tyres and certain van tyres, as well as heavy machinery wheels up to 56 inches in diameter, such as combine harvesters and road working machines. Two-speed version. IC index

3 x 400 V

122

UNITROL AT-56

6–12 1/min

14”–56”

–

1065 mm

2360 mm

TYRE CURING

WBE 4510

WBE 4515

1 694 100 088

10”–26” 6”–40” 1”–18” 1”–24”

190 1/min 80 kg

WBE 4440 S10

Equipped with a 19” TFT display, light ring with positioning laser, electronic adjuster arm and pneumatic quickrelease grip. Special features: automatic QSP programme selection, EasyFix arm for precise weight positioning and contact-free width measurement.

490 mm

1”–16” 1”–24”

WBE 4240

1”–16” 1”–24”

218–262 1/min

WBE 4400

500 mm

1”–20” 1”–24”

1”–16” 1”–24”

1200 mm

1 694 100 450

10”–26” 6”–40”

1500 mm

IC index

70 kg

490 mm

An electronic balancer designed to be applied at tyre workshops which value simplicity, precision and ease of use. Its new design provides better access to rim interiors and ensures better comfort at work.

1 694 100 283

208–250 1/min

80 kg

WBE 4300

Features an LCD display, electronic adjuster arm and mechanical quick-release handle. IC index

1”–16” 1”–24”

1 694 100 480

12”–30” 6”–40”

1200 mm

IC index

490 mm

Equipped with a digital LED display, electronic adjuster arm and pneumatical quick-release grip. Special features: automatic QSP programme selection, EasyFix arm for precise weight positioning and contact-free width measurement.

1 694 100 479

21–262 1/min 80 kg

80 kg

WBE 4245

Equipped with a digital LED display, electronic adjuster arm and mechanical quick-release grip. Special features: automatic QSP programme selection, EasyFix arm for precise weight positioning and contact-free width measurement. IC index

1200 mm 218–262 1/min

1200 mm

80 kg

1 694 100 482

10”–30” 6”–40”

1200 mm

IC index

10”–30” 6”–40”

1 694 100 481

218–262 1/min

1”–18” 1”–24”

WBE 4445 S10

Features an LCD monitor, mechanical quick-release grip, automatic and contact-free rim width measurement, patented LED light-ring for the optimal illumination of rim interiors. IC index

495 mm

12”–30” 6”–40”

495 mm

208–250 1/min

70 kg

500 mm

10”–26” 6”–40”

190 1/min 80 kg

1 694 100 089

1500 mm

IC index

1500 mm

IC index

Electronic wheel balancer with TFT display, pneumatical quickrelease grip and wheel lift. Laser measuring system.

10”–26” 6”–40”

Electronic wheel balancer with TFT display, mechanical quickmounting grip and wheel lift. Laser measuring system.

1”–20” 1”–24”

123

TYRE CURING

WBE 4200

WBE 4400

1 694 100 000

10”–26” 6”–40” 1”–20” 1”–24”

208–250 1/min

WBE 4120 DT

IC index

1”–20” 2”–20”

208–250 1/min

MT 826 DT balancer

IC index

420 mm

208–250 1/min

1”–20” 2”–20”

MT 857 ADT balancer

The MT857ADT balancer has a TFT display, electronic wheel parameter readout module, 3 ALU special programmes, 3 special programmes, 2 PAX programmes, MATCH programme used to optimise rim and tyre runout, self-diagnosis and calibration, EASY-FIX arm which which enables to choose where to place a weight and remeber its bonding location.

208 U/min 50 Hz 250 U/min 60 Hz

124

65 kg

420 mm

1”–20” 2”–20”

WBE 5210

It is equipped with an LED display. A wheel lift included in the kit. IC index

1 694 100 050

70 kg

500 mm

1”–20” 1”–24”

usable <100 1/min 200 kg 550 mm passenger 167–200 1/min

6”–40”

10”–26” 6”–40”

1200 mm

MT857 ADT

1200 mm

IC index

1 694 201 048

10”–24” 8”–26.5”

820 mm 65 kg

1”–20” 2”–20”

Features an LED display and mechanical quick-release grip.

1 694 201 052

208 U/min 50 Hz 250 U/min 60 Hz

420 mm

MT 826 D

Balancer for passenger vehicle, van and motorcycle tyres with MT 826 DT display. IC index

65 kg

10”–24” 8”–26”

420 mm

1 694 100 557

10”–24” 8”–26

820 mm 65 kg

1”–20” 1”–24”

Features an LED display and mechanical quick-release grip.

1 694 100 561

208–250 1/min

500 mm

WBE 4120 D

Features a 19” TFT display, electronic adjuster arm and mechanical quick-release handle. IC index

70 kg

10”–26” 6”–40”

500 mm

820 mm

70 kg

820 mm

208–250 1/min

1 694 100 285

1500 mm

IC index

1200 mm

IC index

Grey colour, equipped with an LCD monitor, electronic adjuster arm. Mechanical quick-release grip and rim width measuring arm.

10”–26” 6”–40”

Features an LED display, electronic adjuster arm and mechanical quick-release grip.

1”–24”

TYRE CURING

ADDITIONAL EQUIPMENT

Central shaft

(Ø 10 mm) with a nut and 2 spacer sleeves for small motorcycles, extra equipment for motorcycles (standard), length: 177 mm IC index

(Ø 14 mm) with a nut and 2 spacer sleeves for small motorcycles, extra equipment for motorcycles (standard), length: 233 mm

1 695 653 430

IC index

Arm retrofitting kit

Electronic adjuster

used to measure rim parameters – width (WBE 4200/4400 only)

used to automatically record rim parameters – width (WBE 4140/4110 only) IC index

1 695 655 885

Centring cone (Ø 120–174 mm) IC index

1 695 606 300

Universal grip

for passenger cars, steplessly adjustable, with centring rings IC index

1 695 654 043

Centring cone kit

for light vans (Ø 88–174 mm) IC index

1 695 654 849

Large hub cap used for fixing IC index

1 695 653 888

Mounting kit

for motorbike rims with a shaft (Ø 19 mm) IC index

1 695 654 060

1 695 604 700

IC index

1 695 656 721

Centring cone

Distance ring

(Ø 88–132 mm) IC index

(Ø 88–132 mm)

1 695 653 449

IC index

1 695 606 200

Mounting grip

for motorcycle wheels (standard) IC index

1 695 654 039

Three-arm flange for light trucks IC index

1 695 653 420

Rubber ring IC index

1 695 624 800

Centring kit

for Mercedes (66.7/84–85 mm) IC index

1 695 654 919

125

TYRE CURING

Wheel balancer for motorcycle CB900B balancer EVERTCB900B

200 mm

200 1/min

CB66 balancer

Equipped with an LED display, 7 ALU functions and 3 balancing programmes: CAR, MOTO and OFF-ROAD. Manual wheel parameter input. IC index

EVERTCB66

65 kg

500 mm

1,5”–20”

Equipped with an LED display, 7 ALU functions and 3 balancing programmes: CAR, MOTO and OFF-ROAD. Measuring time: 7 sec. Automatic input of wheel diameter and offset data, built-in LED lamp, extra brake.

EVERTCB67

500 mm

1,5”–20”

Equipped with an LED display, 7 ALU functions and 3 balancing programmes: CAR, MOTO and OFF-ROAD. Measuring time: 7 sec. Automatic input of wheel parameters, built-in LED lamp and automatic brake in case of unbalance. IC index

EVERTCB68

500 mm

1,5”–20”

1100 mm 1,5”–20”

1100 mm

EVERTBP68

70 kg

500 mm

1,5”–20”

EVERTBP76 balancer

Memory for 3 operating modes, open software – shutting off any functions, 7 ALU modes, weight concealment, MOTO, SUW modes, SUW cone, usercontrolled calibration and diagnostics, HAWEKA mounting bracket, 40 mm hardened shaft (fi 40 mm), power-saving function, SMD LED lamp, automatic electromagnetic brake, automatic wheel stop at the point of weight handling, 19 inch high-definition LCD monitor. Technical data: rotary speed: 140 rpm, engine power: 90 W, power supply: 230 V/50 Hz

1100 mm

EVERTBP76

28”

1100 mm

126

70 kg

500 mm

7 ALU modes, weight cover-up, MOTO mode, SUW mode, SUW cone, user-made calibration and diagnostics, HAWEKA mounting grip, hardened shaft: fi 40 mm, energy-saving feature – LED SMD lamp for the illumination of wheel interiors, automatic electromagnetic brake, automatic wheel stoppage at the weight attachment point. Technical data: rotary speed: 140 rpm, engine power: 90 W, power supply: 230 V/50 Hz

IC index

140 1/min

70 kg

EVERTBP68 balancer

140 1/min

CB68 balancer

1,5”–20”

EVERTBP67

28”

1100 mm 70 kg

500 mm

7 ALU modes, weight hanger, MOTO mode, SUW mode, SUW cone, user-made calibration and diagnostics, HAWEKA mounting grip, 40 hardened shaft: fi 40 mm; machine shutdown upon 5 minutes of its inactivity, foot brake. Technical data: rotary speed: 140 rpm, engine power: 90 W, power supply: 230 V/50 Hz

IC index

140 1/min

70 kg

EVERTBP67 balancer

140 1/min

CB67 balancer

IC index

140 1/min

28”

1100 mm 70 kg

1100 mm

1,5”–20”

IC index

140 1/min

EVERTBP66

10”–24”

1100 mm

10”-24”

800 mm

IC index

28”

IC index

28”

NEW

EVERTBP63-2

7 ALU modes, weight cover-up, MOTO mode, SUW mode, SUW cone, user-made calibration and diagnostics, HAWEKA mounting grip, hardened shaft: fi 40 mm, energy-saving feature. Technical data: rotary speed: 140 rpm, engine power: 90 W, power supply: 230 V/50 Hz

28”

IC index

EVERTBP66 balancer

LED display, support for aluminium rims (3 ALU functions), autocalibration, self-diagnosis. Engine power: 0.25 kW, weight 110 kg

140 1/min

70 kg

500 mm

28”

wheels equipped with special adapter. Powered by hand. Also balancing personal-car wheels.

1,5”–20”

TYRE CURING

70 kg

700 mm

2”–15”

520 mm –

TROLL 2312 tyre changer

Designed to dynamically balance passenger car and commercial vehicle wheels in one measurement run. Equipped with an automatic adjuster for wheel data input. IC index

UNITROL TROLL-2312

Equipped with a modern laser adjuster, which stores data when entering wheel parameters. After the measurement of unbalances done, it precisely indicates where the weight is placed. Moreover, the unit is equipped with an ultrasonic sonar built-in probe for non-contact wheel width measurements.

180 1/min

Equipped with a modern adjuster, which stores data when entering wheel parameters. After the measurement of unbalances done, it precisely indicates where the weight is placed.

UNITROL TROLL-2351

TROLL 2351P – version with a pneumatic handle

70 kg

940 mm

UNITROL TROLL-2351L

940 mm

UNITROL TROLL-2356LP

150 1/min

70 kg

940 mm

2”–30”

TROLL 3305 LP tyre changer – laser adjuster – minimisation – wheel run-out measurement – printer – speech synthesizer – ALU sub-programmes – ”hidden weight” sub-programme – optimisation – non-contact wheel parameter measurement IC index

UNITROL TROLL-3305LP

10”–24”

520 mm

TROLL – 2351 LP version with a pneumatic grip (+ xxx net)

70 kg

– laser adjuster – speech synthesizer – ALU sub-programmes – ”hidden weight” sub-programme – optimisation – non-contact wheel parameter measurement

520 mm

10”–30”

Equipped with a modern laser adjuster, which keep data when entering wheel parameters and upon unbalances measures it accurately indicates where the weight is located. Moreover, the unit is equipped with an ultrasonic sonar built-in probe for non-contact wheel width measurements.

175 1/min

2”–15”

TROLL 2351 L tyre changer

IC index

940 mm

TROLL 2356 LP tyre changer

IC index

520 mm 160 1/min

70 kg

520 mm

IC index

UNITROL TROLL-2312L

2”–15”

TROLL 2351 tyre changer

2”–15”

520 mm

940 mm

10”–30”

520 mm 70 kg

70 kg

TROLL 2312 L tyre changer

IC index

–

UNITROL TROLL-2312S

10”–30”

IC index

2”–10”

150 1/min

70 kg

940 mm

10”–12”

160 1/min

Designed to dynamically balance passenger car and commercial vehicle wheels in one measurement run. The machine has a modern and ergonomic look. Its user-friendly calibration system facilitates work and improves balance accuracy. Moreover, it is equipped with easy-to-read desktop with an LCD display. Manual entry of parameters.

10”–30”

UNITROL TROLL-MICRO

400 mm

IC index

TROLL 2312 S balancer

10”–30”

Designed to dynamically balance passenger car and commercial vehicle wheels in one measurement run. The machine has a modern and ergonomic look. The easy calibration system facilitates work and improves balance accuracy. The machine is equipped with a clear desktop with LCD display. Mechanical quick-release grip.

10”–12”

TROLL MICRO balancer

2”–30”

127

TYRE CURING

ACCESSORIES

Large cone

Small cone

dimensions: 145–165 mm

dimensions: 40–58 mm

UNITROL W-ST-2

IC index

Cone

dimensions: 110–125 mm

diameter: 125–145 mm

UNITROL W-ST-4

IC index

Cone

dimensions: 88–111 mm

UNITROL W-ST-6

IC index

Counter nut

for blind rims (with no central opening)

UNITROL P-NAK-001

IC index

Pin grip

for motorcycle wheels IC index

UNITROL W-U-2P

TROLL – 2322 tyre changer

Designed to dynamically balance-passenger and truck wheels in one measurement run. It is equipped with a clear LCD display suggesting the methodology of wheel balancing; moreover, it is provided with an automatic brake which locks a given wheel in case of its unbalance for all correction planes. The unit is equipped with a modern wheel guidance system for any unbalances identified. IC index

UNITROL TROLL-2322

Designed to dynamically balancepassenger and truck wheels in one measurement run. Features a speech synthesizer which generates messages confirming all operations performed when using the tyre changer and suggesting the methodology of how to proceed with wheel balancing.

1300 mm

UNITROL TROLL-2162C

2”–20”

520 mm

14”–26”

520 mm

128

200 kg

UNITROL W-U-5-A

TROLL – 2162 tyre changer

IC index

120 1/min

UNITROL W-U-2

Grip for balancers

for blind rims for a pneumatic grip (with no central opening) IC index

UNITROL W-ST-7

Pin grip

for a quick-release grip IC index

UNITROL W-ST-5

Cone

dimensions: 43–80 mm IC index

UNITROL W-ST-3

14”–26”

IC index

120 1/min

200 kg

1300 mm

2”–20”

TYRE CURING

Protection and secure fixing of wheels

Mounting adapter for holdfasts for the grips in HAWEKA standard IC index

with 3 and 6 holes IC index

UNITROL 06.01.125A

with 4 holes

UNITROL DOCISK DO-3P

IC index

UNITROL DOCISK DO-4P

with 5 holes IC index

UNITROL DOCISK DO-5P

“Balloon” jack

pneumatic PP-3 “Marek”, lifting capacity: 3500 kg IC index

UNI PP-3

Pneumatic-hydraulic, lifting capacity: 50t/30t/15t, min. height: 156mm, max. height 327mm/429mm IC index

PO-30 rim straightener

For aluminium and steel rims, diameter from 13 to 30 inches. The rim is repaired using a hydraulic cylinder equipped with appropriately selected shaped adapters. The device has a mounting disk with six holes, which using a properly selected centering ring ensures secure fixing of the repaired rim regardless of the number of holes in the rim. This device is also perfect when working with blind rims, i.e. without a central hole IC index

Telescopic jack

UNI PO-30

UNI HPJ50T3

Wheel balancer

NEW

equipped with a revolutionary system of automatic input of geometrical parameters of the balanced wheel and an ultrasound sensor for measuring the external width. The idea behind the patented UNITROL system is that the entire space around the handle is measured and the user only determines the correction planes. In addition, for a more accurate determination of the correction point, the balancer has a laser indicator, precisely indicating the place of gluing the weight. The MONOLITH balancer can be equipped with a pneumatic handle with the brake at the unbalance position. IC index

UNITROL TROLL MONOLITH

Hydraulic scissor lift PRIMA Technical data: max. height: 2000 mm lifting capacity: 3,2 t mass: 725 kg min. height: 105 mm IC index

UNITROL PRIMA

129

TYRE CURING

PNEUBAD-1 tyre-curing bath

The PNEUBAD-1 tyre-curing bath is used to check the tightness of inner tubes and tubeless wheels in cars and vans. An individual inner tube is dipped in water by means of its pneumatic actuator controlled by a lever valve which enables the piston to be stopped in any position. Compressed air outlets are equipped with silencers. Its lightweight plastic tank is positioned freely on the base and can be easily removed and tilted to clean its interiors. A ball drain valve is installed at the bottom of the tank. Its pressure cylinder is equipped with a basket which makes it easier to put a given wheel into the tub, remove it and dry upon being pulled out of the water. IC index

UNITROL WANNA Supply air pressure Total tank volume Recommended water level from the tank top edge Tank emptying time via the drain valve External dimensions Tank inside diameter Working volume of water in the tank Unit weight in a dry state Range of wheels to be checked

0.6 up to 1.0 MPa 437 l working 200 mm / max 110 mm approx. 35 min. 1265 x 1040 x 2300 mm 980 mm approx. 300 l 80 kg diameter to 890 mm, width to 290 mm

MULTI electric wrench

The Multi wheel wrench is used to unscrew and tighten bolts and nuts in trucks, buses, as well as construction, agricultural and military vehicles. It is intended for service in open spaces and in workshops. Unscrewing and screwing can be conducted in vehicles raised completely or partially and resting on their wheels. The construction is selected by the manufacturer so as to ensure the optimal combination of work efficiency and reliability of this unit with its operator’s safety. IC index

UNITROL MULTI Operating temperature Weight Cap size Dimensions (H / W / L) Rated engine speed Current frequency Rated voltage of engine power supply Rated engine power Impact power

-10 up to +35°C 64 kg 1'' 104/52/150 (cm) 1400/min 50 Hz 400 V 1.1 kW 400–2500 Nm

PA-10K automatic pumping machine

This device is designed for measuring and regulating the pressure in vehicle tyres. It generates verbal instructions for use and communicates emergency situations during tyre pressure control. The device conforms to the applicable regulations on the legalisation of pressure equipment by the Central Office of Measures (pol. Główny Urząd Miar)

IC index

UNI W-PA-10K

Dimensions (W / H / D) Power supply Moisture Temperature Power consumption Pneumatic power supply Measurement accuracy Range of indication Weight of the unit

320 x 280 x 260 230 V; 50 Hz up to 95 % 0 ÷ +45° 30 VA max 10 Bar ± 0.1 Bar 0÷ 9.9 Bar 10 kg

K-1 pumping basket

A tyre inflation shield is a safety measure which protects the operator and the environment against the effects of tyre burst and rim cracks. A tyre may burst when being inflated or deflated.

IC index

UNITROL KOSZ K-1

Internal dimensions External dimensions Weight of the unit Maximum tyre and rim dimensions Operating temperature Storage temperature

130

540/1160/1280 655/1300/1300 180 kg 385/85 R 22.5” -10 up to +35 °C -20 up to +45 °C

TYRE CURING

PO-14S straightener

This device is designed to repair steel and aluminium rims with diameters of up to 24 inches. Rims are repaired by means of a hydraulic piston and selected working overlays included in the kit. Corrective operations are easy to perform and they can take just a few minutes. Working overlays allow repairing a given damaged rim at any point of its curvature. The unit is equipped with a head for positioning a repaired rim and several centring rings with different diameters. IC index

UNITROL PO-14S

Dimensions (H / W / L) Unit volume Unit weight Range of repaired rim diameters Max pressure of hydraulic pump Power supply Engine power of hydraulic pump

164/124/430 (cm) 75 db 165 kg up to 24'' 160 bar 3x400V/50Hz 0.55 kw

PO-DIGITAL straightener

Professional fully-automatic rim straightening machine. IC index

UNI PO-DIGITAL

Range Adjustable turnover Drive engine Pump engine Weight Dimensions

10–26” 5–98 rpm 1.5 kW 1.1 kW 720 kg 1574/937/2100

PO-22 straightener

This device is designed to repair steel and aluminium rims with diameters of up to 24 inches. Rims are repaired by means of a hydraulic cylinder equipped with selected shaped overlays. The unit is equipped with a clamping disc with six holes which – by means of a properly selected centring ring – guarantees that the repaired rim will be securely fastened regardless of the number of holes within. This device is also ideal for use with blind rims, i. e. without a central hole. Corrective operations are easy to perform and take just a few minutes. Working overlays allow repairing a given damaged rim at any point of its curvature. The unit kit includes: – different shapes of overlays allow to repair various deformations – a set of centring rings for mounting rims with different diameters of their central holes – device for locating rim deformations – a turning lathe (equipped with a knife) – pre-straightening rim lever IC index

UNI PO-22

Unit weight Power of drive engine Power supply Power of straightening actuator Range of repaired rim diameters Engine power of hydraulic pump Max pressure of hydraulic pump Unit volume

450 kg 0.55 kW 3x400V/50Hz 45kN from 13 up to 24 inches 0.55 kW 200 Bar <70 dBA

UNI PO-ROLLER

This device is designed to repair steel and aluminium rims with diameters from 10 to 19 inches. Rims are repaired by means of a hydraulic cylinder equipped with selected shaped overlays. The unit is equipped with a clamping disc with six holes which – by means of a properly selected centring ring – guarantees that the repaired rim will be securely fastened regardless of the number of holes within. This device is also ideal for use with blind rims, i. e. without a central hole. IC index

UNI PO-ROLLER

131

TYRE CURING

Drill

for tyre-curing repairs

for tyre-curing repairs IC index

0XTY004

IC index

Milling cutter

for tyre-curing repairs IC index

for tyre-curing repairs

0XTY006

IC index

Drill

for tyre-curing repairs

0XTY008

IC index

Drill

for tyre-curing repairs

0XTY010

IC index

for tyre-curing repairs

0XTY012

IC index

Open awl

for tyre-curing repairs

0XTY014

Tool

IC index

for tyre-curing repairs (4 in 1), milling cutter, awls IC index

0XTY016

0XTY015

Tyre repair kit – awl with a grip – drill with a grip – 5 strings – glue IC index

132

0XTY013

Open awl

for tyre-curing repairs IC index

0XTY011

Cord awl

for tyre-curing repairs IC index

0XTY009

Milling cutter / drill

for tyre-curing repairs IC index

0XTY007

Drill

for tyre-curing repairs IC index

0XTY005

0XTY003

TYRE CURING

Scraper

for removing glued weights IC index

0XTY019

for tyre-curing repairs

0XTY021

Scraper

0XTY023

Pressure roller

for glued weights IC index

0XTY025

double type IC index

0XTY027

for tyre roughening

0XTY051

Brush IC index

0XTY049

IC index

0XTY024

Valve screwdriver double type

0XTY026

Lever

used to insert plastic caps

0XTY030

Brush

for mounting paste, handle length: 390 mm, head: Ø 46 mm IC index

for mounting paste, handle length: 170 mm, head: Ø 43 mm

0XTY022

Patch roller

IC index

Scraper IC index

for tyre-curing repairs

IC index

Valve screwdriver

0XTY020

Knife IC index

for tyre roughening IC index

for tyre-curing repairs IC index

Knife IC index

Knife

0XTY048

Brush

for mounting paste, handle length: 185 mm, head: Ø 69.5 mm IC index

0XTY050

133

TYRE CURING

Meter

Electronic meter

for measuring tread thickness IC index

for measuring tread thickness

0XTY028

IC index

Digital meter

Tester

for measuring tread parameters (thickness), measurement accuracy: 0.01 mm IC index

for measuring tread parameters (thickness), 0â&#x20AC;&#x201C;25 mm

SEA VS0564

IC index

Tyre repair kit

patches, awl with a handle, auger with a handle, strings, roll IC index

Tyre repair kit

patches, awl with a handle, auger with a handle, strings, valve screwdriver, valves, nuts

20 strings (length: 20 cm), awl with a metal T-handle, spiral drill with a metal T-handle, grease, two Allen keys for awl unscrewing, knife

0XTY056

IC index

Tyre repair kit with CO2

white, 12 pcs. in the pack IC index

Spherical grinding wheel

for tyre repairs, 60 pcs., length: 10 cm

for drills, 3x60 mm

134

pumex IC index

0XTY031

Milling cutter IC index

0XTY044

0XTY002

Cord IC index

0XTY001

Tyre marker

awl with a handle, milling cutter with a handle, 3 cartridges, 16 g CO2, CO2 valve, 10 strings, glue, knife IC index

0XTY055

0XTY041

Tyre repair kit IC index

SEA TST/DGE

Tyre repair kit

patches, awl with a handle, auger with a handle, strings, valve screwdriver, valves, nuts, pliers, tyre marker, threader, torch and many more IC index

0XTY029

595-4917

HSS cutter

for drills, 4.5 mm IC index

511-1767

Milling cutter for cutting cords 3x50 IC index

595-4900

0XTY042

Hartmetal cutter Milling cutter 4.5x90 mm IC index

595-5019

for steel cords 6 x 65 mm IC index

595-4924

TYRE CURING

Special attachment (1/2”)

for wheel screws in Mercedes cars: C-class (W204), E-class (W211, W212, W207), SLK (W172), M-class (W164, 166), CL-class (W216), S-class (W221, W222) IC index

for securing wheel bolts in BMW vehicles, 21 pcs. IC index

0XAT6051A

for securing wheel bolts in VAG, 20 pcs.

0XAT6056

Set of adapters

for securing wheel bolts in BMW, 20 pcs. IC index

0XAT6057

Lug wrench

for wheels (17, 19, 21, 23), arms: 400 mm

1474-16

0XAT6051B

thin-walled, for aluminium rims, sizes: 17, 19, 21, in plastic shields

84603MBC

Set of adapters

for securing wheel bolts in AUDI, 20 pcs. IC index

IC index

0XAT6058

AEAL1616

Expendable wrench for wheels, attachments: 17x19 mm; 21x23 mm IC index

Impact attachment kit IC index

IC index

wrench for 1/2” wheels, 17, 19, 21 mm, length: 400 mm

AEAQ2214

Lug wrench IC index

for securing wheel bolts in VAG, 23 pcs.

Lug wrench

folding wrench adjusted to wheel sizes: 17x19x21x22 IC index

Set of adapters

SEA SX0417

Set of adapters IC index

Set of adapters

0XAT6031

Impact attachment kit

thin-walled, for aluminium rims, sizes: 17, 19, 21, 22 in colourful plastic shields IC index

84604MBC

Wheel wrench – 1/2”

manually-operated, for tamping, with a set of attachments: 17, 19, 21, 22 mm (do scorched screws) IC index

0XAT6032

SONIC 1/2” special attachment

SONIC 1/2” special attachment for wheels, hexagonal type, 17 mm, for Mercedes-Benz W221 S-Class, CL-Class and Maybach (OEM: 000 990 5407) IC index

3310417

135

TYRE CURING

Manual tyre changer

for truck wheels, suitably-shaped equipment for the disassembly and assembly of tyres in trucks and buses IC index

IC index

Tyre lever

for trucks (torque amplifier), 65:1; 32 and 33 mm attachments

size: 120x5 cm, facilitates dismantling of tyres, material: steel

0XPTSM0006

IC index

Jaw

SEA TC966

0XAT6218

PSO-15 cutting machine

for the disassembly of agricultural and truck tyres – hydraulic type (bead-breaker) IC index

0XTY040

0XAT6224

Device for twisting off wheels IC index

NEW

for truck wheels

used to re-groove tyre treads IC index

you should extra purchase the pump IC index

UNITROL PSO-15 STD

SEA RE97.10-01

and hose IC index

SEA RE97.10-03

Cutters for PSO-15

Cutter for T-APO-200 cutting machine, 20 pcs. size 3–5 mm, R1, type ”U”

UNITROL C1

Cutter for T-APO-200 cutting machine, 20 pcs. size 5–11 mm, R2, type ”U”

Cutter for T-APO-200 cutting machine, 20 pcs. size 3–15 mm, C1, type ”V” IC index

IC index

Cutter for T-APO-200 cutting machine, 20 pcs. size 6–10 mm, C2, type ”V” IC index

UNITROL C2

IC index

UNITROL C3

IC index

UNITROL C4

UNITROL R4

Cutter for T-APO-200 cutting machine, 20 pcs. size 11–18 mm, R5, type „U”

Cutter for T-APO-200 cutting machine, 20 pcs. size 12–17 mm, C5, type ”V” IC index

UNITROL R3

Cutter for T-APO-200 cutting machine, 20 pcs. size 9–16 mm, R4, type ”U”

Cutter for T-APO-200 cutting machine, 20 pcs. size 10–14 mm, C4, type ”V” IC index

UNITROL R2

Cutter for T-APO-200 cutting machine, 20 pcs. size 7–13 mm, R3, type ”U”

Cutter for T-APO-200 cutting machine, 20 pcs. size 8–12 mm, C3, type ”V” IC index

UNITROL R1

IC index

UNITROL R5

UNITROL C5

Cutter for T-APO-200 cutting machine, 10 pcs. size 20–28 mm, C6, type ”V” IC index

UNITROL C6

Cutting machine

used to re-groove tyre treads, 20 cutters included IC index

0XTY047

Cutters for 0XTY047

20 pcs. in the pack size 2–3 mm, depth 9 mm R1 type ”U” IC index

0XTY047R1

size 2–5 mm, depth 10 mm R2 type ”U” IC index

0XTY047R2

size 5–9 mm, depth 12 mm R3 type ”U” IC index

0XTY047R3

size 7–11 mm, depth 13 mm R4 type ”U” IC index

0XTY047R4

size 9–14 mm, depth 14 mm R5 type ”U” IC index

0XTY047R5

size 2–3 mm, depth 9 mm W1 type ”V” IC index

size 4–6 mm, depth 11 mm W2 type ”V” IC index

0XTY047W2

for trucks, multiplicator, 1–1/2” x 1”, max input torque 400 Nm, max output torque 4000 Nm IC index

ANCE1648

size 6–9 mm, depth 13 mm W3 type ”V” IC index

0XTY047W3

size 8–11 mm, depth 14 mm W4 type V” IC index

0XTY047W4

size 10–14 mm, depth 14 mm W5 type ”V” IC index

136

0XTY047W1

Torque amplifier

0XTY047W5

TYRE CURING

Tyre-curing pliers for weights IC index

0XTY017

for weights, length: 250 mm

JEAA1010

with the base

4474001

Panel container system IC index

with a 20â&#x20AC;? plastic cover

0XTY043

0XTY053

Tyre lever 530 mm IC index

Tyre lever

48212530

Tyre lever

380 mm IC index

for weights, length: 240 mm

for weights, 96 trays included

0XTY054

Tyre lever IC index

0XTY018

Tyre-curing pliers IC index

Tyre-curing spreader IC index

for weights IC index

Tyre-curing pliers IC index

Tyre-curing pliers

525 mm

48212380

IC index

JCAB2821

Tyre lever 300 mm IC index

400 mm

0XAT6208-03

500 mm IC index

IC index

0XAT6208-04

600 mm

0XAT6208-05

IC index

0XAT6208-06

137

TYRE CURING

Screw tap

Safeguard

for valves IC index

0XTY039

IC index

Calliper

BEAH060411

Brush

steel wire

4811254

Inflator 25 l IC index

IC index

0XAT6036

Tyre pressure gauge

0–16 bar, 0–240 psi manometer

for pumping wheels, tyres 25 / D-RB with the primary European legalisation recognised by the Central Office of Measures

IC index

0XTY045

0–16 bar, 0–240 psi manometer with a cable

0XTY032

IC index

0XTY035

0XAT6038

Professional gun IC index

for removing plastic screw covers, in Audi, Seat, Skoda, VW, Vauxhall/Opel wheels

Tyre pressure gauge

for measuring the spacing of bolts in wheels, for rims screwed using 3, 4, 5, 6 bolts IC index

Device

for rim edges when fitting tyres

UNITROL IFL

Gun

for pumping wheels with a manometer IC index

for air-pumping up to 12 bar EURODAIN (large manometer)

0XTY046

IC index

519-9356

Brush

made of steel, for clamps (wire) IC index

SEA WB05/R

Inflator 19 l IC index

EVERTINFLATOR

Used to provide the impact inflation of tubeless tyres in the process of mounting a tyre on the rim. An inflator shot seals the tyre on the rim which makes it possible to inflate the wheel to any specified pressure in a standard manner. This inflator can be used for wheels in passenger cars, vans and trucks.

138

TYRE CURING

Trolley for wheels

Transport trolley

lifting capacity: 1.2 t, trucks, agricultural tractors, etc. dimensions: 1270x990x1340 mm, weight: 157 kg IC index

for tyres, lifting capacity: 1 t, dimensions: 1040x1090x890 mm IC index

0XPTOG0001

Transport trolley for tyres

lifting capacity: 100 kg IC index

lifting capacity: 30 kg IC index

sized: 165–570 mm, lifting capacity: 250 kg

0XPTOG0012

IC index

Transport trolley for tyres 0XPTOG0014

0XPTOG0017

0XPTOG0013

Hanging rack

for tyres / wheels, width: 1219 mm (max 5 wheels), load capacity: 170.5 kg IC index

0XPTOG0002

Trolley for mounting wheels lifting capacity: 100 kg, working height: 1010–910 mm IC index

0XPTOG0015

For home use Tyre stand

height: 1015 mm, base dimensions: 465x462 mm IC index

TORINOG0001

Vehicle lifting unit

Tyre stand IC index

TORINPO0004

on wheels, metal base, height: 1025 mm, base dimensions: 485x472 mm

TORINOG0002

”quick-lift” jack + mat + safety wedges + gloves, lifting capacity: 2 t, lifting height: 130–345 mm IC index

Tyre stand

height: 1015 mm, base dimensions: 465x462 mm, on wheels

IC index

TORINOG0004

Vehicle lifting unit

”quick-lift” jack + supports + safety wedges, lifting capacity: 2 t, lifting height: 140–340 mm IC index

TORINPO0003

A range of products for home use.

139

TYRE CURING

Tyre treatment kit

Case with materials and tools for the repair of tyres in passenger, delivery and 4x4 vehicles – MUST-HAVE KIT It consists of: – SMT 0 (30 pcs.), SMT 1 (30 pcs.), SMT 2 (30 pcs.) patches – PPQ 3 mm (24 pcs.), PPQ 4.5 mm (24 pcs.), PPQ 6 mm (24 pcs.) pins – SP 3 (30 pcs.), SP 4.5 (30 pcs.), SP 6 (30 pcs.) pins – Bufsol cleaning fluid, BRS sealant – Super Solution activator – chalk (2 pcs.) – low-speed grinder – spiral cable – vacuum cleaner – scraper – brush made of coconut fibre – copper brush – steel brush for rubber roughing + 3/8” adapter – roll – 3 mm 4,5 mm 5,8 mm milling cutters IC index

0XVUSKRZYNKA

SMT-0 tyre treatment patch

(44x44 mm, 30 pcs. per pack. price per pack) IC index

0XVU262812

SMT-1 tyre treatment patch

(57x57 mm, 30 pcs. per pack. price per pack) IC index

0XVU262813

PPQ pin

IC index

SUPERSOLUTION activator (glue) for tune and tyre patches IC index

with a bearing

140

IC index

0XVU262821

4.5 mm

0XVU262819

IC index

Scraper

for tyre treatment IC index

0XVUTRT22

0XVU262822

6 mm IC index

0XVU262823

BRS sealant for tyre treatment IC index

0XVU262826

0XVU262825

Pressure roller IC index

IC index

6 mm

0XVU262802

0XVU262814

for tyre treatment / filling (30 pcs. per pack, price per pack) 3 mm

0XVU262818

4.5 mm

IC index

SP pin

for tyre treatment (24 pcs. per pack, price per pack) 3 mm IC index

SMT-2 tyre treatment patch

(66x66 mm, 30 pcs. per pack. price per pack)

0XVUTRT24-383

Bufsol spray

600 ml cleaning liquid IC index

0XVU67073

Chalk

professional type, for marking tyres IC index

4806-55-0406E

TYRE CURING

Brush made of coconut fibre IC index

0XVUA08-114

Low-speed grinder 2800 rpm for tyre curing IC index

0XVUMA 734

Cords

Copper brush

for tyre treatment, dimensions: 100 mm Ø 6 mm IC index

IC index

XVU262833

Vacuum cleaner

Spiral cable

workshop type, for tyre curing IC index

0XVUG06M-JW

for compressed air (3 m) IC index

0XVU0210.3

0XVU0140.7

Tool kit (box-case)

used to repairs tyres in passenger, 4x4, delivery vehicles It consists of: – brush for rubber roughing – Ø 38 mm x 18 mm grinding wheel – Ø 50 mm x 25 mm grinding wheel – 3 mm 4.5 mm 5.8 mm milling cutters IC index

0XVUNARZEDZIA

Grinding wheel

for tyre roughening (Ø 50x25 mm K50) IC index

0XVUETC043

3 mm milling cutter for calibrating damage in a tyre (3 mm x 60 mm) IC index

0XVU11883

Steel brush

rubberised for rubberroughing IC index

for tyre roughening (Ø 38x18 mm K50)

0XVU19545

IC index

0XVUETC042A

4.5 mm milling cutter for calibrating damage in a tyre (4.5 mm x 80 mm) IC index

0XVU11882

5.8 mm milling cutter for calibrating damage in a tyre (5.8 mm x 90 mm) IC index

0XVU11884

Adapter

for 3/8” grinder IC index

0XVU11890

141

TYRE CURING

Storage container

foldable, flat-pack, dimension: 2.25 x 2.2 x 2.2 m IC index

foldable, flat-pack, dimension: 3 x 2.2 x 2.2 m

0XKONTENER2

IC index

Storage container

foldable, flat-pack, dimension: 4 x 2.2 x 2.2 m IC index

0XKONTENER3

foldable, flat-pack, dimension: 5 x 2.2. x 2.2 m

0XKONTENER4

IC index

0XKONTENER5

Storage container foldable, flat-pack, dimension: 6 x 2.2 x 2.2 m IC index

0XKONTENER6 Delivery costs (individually agreed upon) may be added to the price of the container.

Container rack stand foldable, flat-pack IC index

142

0XSTOJAK

Shelf support for a container rack, flat-pack IC index

0XPODPORA

LIFTS AND JACKS

1-column jack

Model: 612E, automatic electromagnetic lock.

Model: 612FE, automatic electromagnetic lock.

MOBILE VERSION

STATIONARY VERSION

IC index

EVERT612E

IC index

EVERT612FE

Advantages of the EVERT single-column jacks: – These 1-column solutions save space in your workshop. – The jack’s 2500 kg lifting capacity means it can be used for most passenger cars. – Fully controlled from the control panel on the column (the 24 V control system). – The aluminium engine housing prevents overheating. – Equipped with an anti-shock valve to prevent the vehicle’s body from rapidly dropping in the event of damage to the hydraulic system. – All four arms can be easily extended and rotated to help find the optimum support point for the vehicle. – Equipped with screw-off adapters for adjusting the support height of the vehicle.

1-column Mini JACK

1-column jack

Grip by wheel or car body, minimum wheel diameter: 500 mm, max lifting height: 700 mm.

Model: 496

IC index

0XPTTL20001

IC index

OMA 496

143

LIFTS AND JACKS

2-column jack

Model: 6253M, asymmetric, equipped with a base, manual mechanical lock, adaptor for buses.

Model: 6253E, asymmetrical, equipped with a base, automatic electromagnetic lock, adapters for buses.

IC index

EVERT6253M

IC index

EVERT6253E

Also available in the 230 V version.

2-column jack

Model: 6254E, asymmetrical, equipped with a base, automatic electromagnetic lock, adapters for buses.

Model: 6255E, symmetrical, equipped with a base, automatic electromagnetic lock.

IC index

EVERT6254E

IC index

EVERT6255E

2-column jack

Model: 6264C, lifting capacity: 4000 kg, asymmetric, baseless, automatic electromagnetic lock, overall height: 3976 mm.

Model: 62B35TE, modular, automatic locking system with APS technology, optional top column combination kit (EVERTZL791110053)

IC index

EVERT6264C

IC index

EVERT62B35TE

From June 2018 new model available: EVERT6214EKZ

144

LIFTS AND JACKS

2-column jack

HL 2.40 NT; INNOVATIVE HYDRAULIC SYSTEM. Hyper Flow technology. IC index

IC index

NEW

HLK246.0000.100D-5001

HLNT240.0000100D

2-column jack POWER LIFT HL 2.30 K, Hyper Flow technology. IC index

HLNT230.0000100D

VLH 2140

Lifting capacity: 4 t 2.2 kW drive engine – Rexroth hydraulics (made by Bosch). Lifting time: 32 sec. Different jack variants depending on their height and the length of their telescopic arms.

With standard (2-piece) arms Front: 570–890 mm Back: 930–1480 mm Height: 4.00 m IC index

1 692 821 411

Height: 4.20 m IC index

1 692 821 412

Height: 4.40 m IC index

1 692 821 413

Height: 4.65 m IC index

1 692 821 414

With standard (3-piece) arms Front: 700–1421 mm Back: 700–1421 mm Height: 4.00 m IC index

1 692 821 511

Height: 4.30 m IC index

VLH 2155

1 692 821 512

Height: 4.60 m

Lifting capacity: 5.5 t 3 kW drive engine – Rexroth hydraulics (made by Bosch). Lifting time: 36 sec. Different jack variants depending on their height and the length of their telescopic arms.

IC index

1 692 821 513

Height: 4.90 m IC index

1 692 821 514

With long arms (3-piece) Front: 726–1447 mm Back: 726–1447 mm Height: 4.00 m IC index

1 692 821 421

Height: 4.20 m IC index

1 692 821 422

Height: 4.40 m IC index

1 692 821 423

Height: 4.65 m IC index

1 692 821 424

With long (3-piece) arms Front: 900–2000 mm Back: 900–2000 mm Height: 4.00 m IC index

1 692 821 521

Height: 4.30 m IC index

1 692 821 522

Height: 4.60 m IC index

1 692 821 523

Height: 4.90 m IC index

1 692 821 524

145

LIFTS AND JACKS

2.40 SLE

VLE 2130EL

Lifting capacity: 4 t Two 2 x 1.5 kW engines Electronic synchronisation, no lower connection Lifting height: 2060 mm Short 2-piece arm: 570–1160 mm Long 2-piece arm: 1130–1840 mm Lifting time: approx. 46 sec. Pneumatic socket and 230 V on the column

Lifting capacity: 3 t Two 2 x 3 kW engines Electronic synchronisation, no floor switch E-Set (two compressed air connections and 230 V socket) Lifting height: 2005 mm Short 2-piece arm – 420/830 mm Long 3-piece arm – 840/1340 mm Lifting time: approx. 45 sec.

IC index

SL240.0000100D

IC index

1 692 822 307

2-column jack

ATT HYMAX S 3000 Colour – grey Automatic electronic synchronisation Top or under-floor connection (option) Electric pneumatic socket built into the column

2-column jack Nussbaum SMART Lift 2.30 SLE Colour – blue Automatic electronic synchronisation Top or under-floor connection (option) Electric pneumatic socket built into the column

IC index

0986400H32A

IC index

SL230.6000100D

REPLACEMENT PARTS FOR HYMAX S AND SMART LIFTS

Main nut IC index

146

Main switch

232SL02019/MON

up/down IC index

994777

Rubber cap

on the jack saddle – 1 pc. IC index

901103031

Drive belt 1 pc.

IC index

970699

LIFTS AND JACKS

2-column jack

Model: 502A ES, 1-engine, chain drive transmission, electric-pneumatic socket on the column.

Model: 503 ES, 1-engine, chain drive transmission, electric-pneumatic socket on the column.

IC index

OMA 502A ES

IC index

OMA 503 ES

2-column jack

Model: 504A ES, electronic synchronisation, electric-pneumatic socket on the column, 2x2.6 kW engines.

Model: 505C ES, electronic synchronisation, electric-pneumatic socket on the column, 2x2.6 kW engines.

IC index

OMA 504A ES

IC index

OMA 505C ES

ACCESSORIES

Adapters

uplifting type, for 2-column jacks, 4 pcs. in the kit, height: 100 mm.

OMA L953

IC index

Drive belt for jacks IC index

B0001

Adapters

uplifting type, for 2-column jacks, 4 pcs. in the kit, height: 170 mm. IC index

OMA L954

Spindle oil (1/2 l)

Universal type. Used to lubricate lifting screws in screw jacks. IC index

D2324

Adapters

uplifting type, for 2-column jacks, 4 pcs. in the kit, height: 250 mm. IC index

OMA L955

We are the only provider of OMA 2- column jacks which include in the standard version adapters uplifting by up to 60 mm and the Energy Set: - pneumatic socket - 230 V socket - pneumatic key grip

147

LIFTS AND JACKS

4-column jack

Axle jack Model: 542BA, lifting capacity: 2000 kg, pneumatic-hydraulic type. IC index

Model; 526B, diagnostic type. IC index

OMA 526B

4-column diagnostic 6435 jack

Lifting capacity: 4000 and 5000 kg, electrohydraulic type, platform length: 4.80 or 5.20 m, auxiliary jack: 2000 kg, expansion plates, turntables, electromagnetic ratchets. Length – 4.8 m IC index

OMA 542BA.04

SUBJECT TO STOCK AVAILABILITY

4-column jack

Length – 5.2 m

EVERT6435B 48

IC index

EVERT6435B 52 – 5,20M

Model 6435S plain, electromagnetic latches. IC index

EVERT6435S 48

Auxiliary jack as option: IC index

EVERTJACKA

IC index

EVERTJACKM

MOBILE COLUMN JACKS FOR AMI TRUCKS (5.5–7.5 T) Lifting capacity per 1 column [t]

IC index: AMI 5.5/4 – Load-carrying capacity: up to 7500 kg – Precise height specification on the control panel screen – Wireless column control for significant acceleration of work – Electric adjustment and synchronisation of the jack and its operation – Highly efficient and economical hydraulic drive system – The system can be extended (by 4 to 12 columns) – High quality of production resulting from the entire manufacturing process being located in the Czech Republic – The kit includes a portable tablet and remote control

Number of columns

IC index: AMI 5.5/6

IC index: AMI 5.5/8

IC index: AMI 5.5/10

IC index: AMI 5.5/12

IC index: AMI 7.5/4

148

IC index: AMI 7.5/6

IC index: AMI 7.5/10

IC index: AMI 7.5/8

IC index: AMI 7.5/12

LIFTS AND JACKS

VLH 4145

Lifting capacity 4.5 t, length 4.40 m, flat type IC index

1 692 841 411

VLH 4145L

Lifting capacity: 4.5 t, length: 4.40 m plus an in-pit jack with a lifting capacity of 2.5 t IC index

1 692 841 441

VLH 4345

Lifting capacity 4.5 t, length 5.07 m, flat type IC index

1 692 841 511

VLH 4345L

Lifting capacity: 4.5 t, length: 5.07 m plus an in-pit jack with a lifting capacity of 2.5 t IC index

VLH 4245

1 692 841 521

VLH 4345A

Lifting capacity 4.5 t, length 5.07 m, for geometry IC index

1 692 841 531

VLH 4345LA

Lifting capacity: 4.5 t, length: 5.07 m, for geometry plus in-pit jack with a lifting capacity of 2.5 t IC index

1 692 841 501

Lifting capacity 4.5 t, length 4.81 m, flat type IC index

1 692 841 451

VLH 4245L

Lifting capacity: 4.5 t, length: 4.81 m plus an in-pit jack with a lifting capacity of 2.5 t IC index

1 692 841 461

VLH 4245A

Lifting capacity 4.5 t, length 4.81 m, for geometry IC index

1 692 841 471

VLH 4245LA

Lifting capacity: 4.5 t, length: 4.81 m, for geometry plus in-pit jack with a lifting capacity of 2.5 t IC index

1 692 841 481

ADDITIONAL EQUIPMENT

Inter-wheel jack 2.0 t

IC index

1 692 872 384

Inter-wheel jack 2.6 t

IC index

1 692 872 385

Jerker

â&#x20AC;&#x201C; in the kit IC index

1 692 872 378

4-column jack

Diagnostic, electro-hydraulic model (6435BWF). Equipped with an auxiliary scissors in-pit jack, expansion plates, turntables and electromagnetic ratchets in the standard version. lifting capacity: 4000 kg; platform length 4.80 m IC index

EVERT6435BWF 48

lifting capacity: 5000 kg; platform length 5.20 m IC index

EVERT6435BWF 52

149

LIFTS AND JACKS

Scissors in-pit jack

Scissors in-pit jack Model: 6501. Min height: 110 mm, max height: 1850 mm, four cylinders in the hydraulic system provide significantly higher strength and reliability. To be mounted on the floor. IC index

Model: 6503. Lifting height: 1800 mm when the in-pit. To be mounted in the pit. IC index

EVERT6503

EVERT6501

Scissors jack

Scissors in-pit jack

Model: VLS 3132H

JUMBO LIFT NT 3200 model Latest technology: Hyper Flow.

IC index

1 692 852 321

IC index

JLB032.0000000D

Scissors in-pit jack Type of car Lifting capacity

Model: 532LP. IC index

OMA 532LP

Electro/hydraulic jack Electric/mechanical jack

Maximum vehicle length measured in-between its axles

Built-in jerker

Flat jack, with a specified overrun length

Jack to be mounted in the floor

Flat jack plus built-in in-pit jack, with a specified run-in length

Jack to be mounted in the pit

Low profile

Used to mount a jack in the floor pit for the 532 LP model. IC index

150

Diagnostic jack, with a specified run-in length

Mobile jack

Diagnostic jack plus built-in in-pit jack and specified run-in length

Auxiliary jack, axle jack Turntables

OMA 532LP FRAME The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

LIFTS AND JACKS

Mobile in-pit scissors jack

– low-lifting model (MR30) – lifting height: 1000 mm – minimum height: 105 mm

– lifting capacity: 3 t – compact scissors jack – ultra flat type, minimum height – 100 mm only – mobile type, for use anywhere in the workshop – no fixing to the floor is required –comfortable for tyre and brake service works in vehicles up to 3 t GVM – lifting height up to 930 mm – model: VLS 3130

IC index

EVERTMR30

IC index

1 692 852 301

Also available in 230-V version.

Mobile in-pit scissors jack

Model: 537.

– low-lifting model (SPRINTER Mobile 2500) with its mobile kit – galvanised platforms, lifting height: 980 mm – min height: 99 mm

IC index

OMA 537

IC index

PPS-5 jack

This jack is designed to lift passenger vehicles and vans in order to dismount or mount all wheels at the same time. With saddles and short runs-in. With saddles: IC index

UNITROL PPS-5-LAP

pneumatic power supply unladen weight lifting height

0,7 ÷1 MPa ( 7÷10 bar) 400 kg 380 mm 2450 mm x 1400 mm (without a run-in) external dimensions 2450 mm x 1950 mm (with a run-in) height at rest 80 mm operating temperature range - 4 °C ÷ + 40 °C working pressure up to 0.7 MPa (7 bar) load capacity 2000 kg

SPB025.0000000D

Mobile in-pit scissors jack Model: EE-TS6600, lifting capacity: 3000 kg, hydraulic type, lifting height: 1200 mm, minimal height: 135 mm, mobile version. IC index

0XPTPF0003-2

Without saddles: IC index

UNITROL PPS-5

151

LIFTS AND JACKS

Diagnostic scissors jack

– mounted in the floor – ideal for checking vehicle convergence and chassis as well as for general repairs of passenger cars and light vans – turntables in the kit – long rear expansion plates – aluminium engine construction prevents overheating – safe control system with 24 V power supply – automatic limit switches – hydraulic platform synchronisation – pneumatic ratchet system – extra in-pit jack at platforms with its lifting capacity of 3500 kg – lifting capacity: 4200 kg, platform length: 4800 mm IC index

EVERT6603B 48L 42T

Diagnostic scissors jack

152

EVERT6603B 51L 50T

LIFTS AND JACKS

ACCESSORIES

Auxiliary jack

Hydraulic type, manual pump, pit size: 825 – 1125 mm, saddle width: min 800 mm – max 1500 mm, lifting capacity: 2 t hydraulic jack IC index

When placed on jack-arm rubber caps, they prevent the car from sliding when on its arms, for the following jack types: EVERT6253, EVERT6254. IC index

EVERTJACKM

For 2-column EVERT jack, 120 mm in diameter. Per piece.

EVERTJACKA

IC index

Oil filter

For EVERT jacks. Suitable for all models. IC index

EVERTZL711004020

Rubber cap

hydraulic-pneumatic jack IC index

Adapters (4 pcs.)

EVERTZL330403001

EVERTZL420040050B

Jerker

Pneumatic-hydraulic type, complete with a control console, LED lamp and built-in remote control, autonomous unit. The unit is available in the RAL7031 colour. IC index

EVERTDETECTOR2

Set of mechanical turntables

380 or 400 mm, permanent engraved markings, 2 pcs. in the package. IC index

EVERTTURNTABLE-380

IC index

EVERTTURNTABLE-400-CI

Hydraulic oil

For lifts. High-quality universal hydraulic oil for use with electrohydraulic driven workshop jacks. Contains additives which increase the service life of hydraulic systems. Packaging: 5 l. IC index

NEW

EVERTOIL/LIFT

Hydraulic oil

For special presses and jacks. High-quality universal hydraulic oil for presses and various types of specialised jacks such as quick-lift jacks, gearbox jacks, cranes and bottle jacks. It contains additives to increase the service life of hydraulic systems. Packaging: 1 l. IC index

Rubber washer

Universal type for workshop jacks. Dimensions: 160x120x38 mm IC index

EVERTZL420190090

Rubber washer

Universal type for workshop jacks. Dimensions: 117x29 mm IC index

NEW

00844043

NEW

EVERTOIL/JACK

Rubber washer

Universal type for workshop jacks. Dimensions: 117x59 mm IC index

NEW

00844042

Rubber washer

Universal type for workshop jacks. Dimensions: 137x23 mm IC index

NEW

00848879

153

LIFTS AND JACKS

Professional motorcycle jack

Hydraulic type: MLH1000; pneumatic ratchets. Lifting capacity: 1000 kg Lifting height: 1200 mm Minimum height: 160 mm Lifting time: 30 s Engine power: 2.2 kW Supply voltage: 230 V Standard platform size: 2200 x 700 mm Pneumatic power supply: 6–8 bar Optional accessories: EVERTMOTO-EXT; EVERTMOTO-KIT; EVERTMOTO-JACK; EVERTMOTO-RAMP IC index

EVERTMOTO

Motorcycle jack

Hydraulic type to serve scooters Max load: 360 kg Min lifting height: 220 mm Max lifting height: 780 mm Total length: 2 215 mm Platform width: 480 mm On 2 rigid wheels and 2 swivel castors IC index

73100

Motorcycle jack

Hydraulic type for scooters and motorcycles, lifting capacity: 453 kg Width: 680 mm Length: 2200 mm Minimum height: 180 mm Maximum height: 750 mm Weight: 135 kg Total platform length (with a run-in): 2850 mm IC index

73200

Motorcycle jack

For quads and garden tractors, hydraulic type (pneumatically controlled), overall length: 2870 mm. It can be used to handle motorcycles, mowers, quads etc. Max lifting capacity: 685 kg Width: 1200 mm Length: 2000 mm Minimum height: 175 mm Maximum height: 820 mm 1/4” air-connection Air pressure: 7.5–8.5 bar IC index

Jack for quads

Motorcycle jack

Platform type Lifting capacity: 600 kg Min lifting height: 200 mm Max lifting height: 1030 mm Run-in platform dimensions: 2790x1300 mm

Hydraulic-pneumatic type, lifting capacity: 454 kg, platform dimensions: 690x2200 mm, lifting height: 190–710 mm IC index

* hydraulic pump in line with additional equipment options

IC index

Lifting capacity: 2000 kg, pit dimension: 780–1075 mm, operating range: 850–1600 mm, lifting height: 95–300 mm

154

SEA MC401A

OMA 2544B

Inspection-pit jack IC index

73250

SEA SJBEX200

Inspection-pit jack

Lifting capacity: 3000 kg, pit dimension: 780–1075 mm, operating range: 850–1600 mm, lifting height: 95–300 mm IC index

SEA SJBEX300

LIFTS AND JACKS

Assembly support

for motorcycles and all-terrain vehicles lifting capacity: 135 kg min lifting height: 240 mm max lifting height: 350 mm IC index

SEA MPSD1

Motorcycle jack

drive-through type lifting capacity: 680 kg min lifting height: 140 mm max lifting height: 410 mm jack dimensions: 864x396x315 mm IC index

0XPTPI0002

Motorcycle jack

platform type lifting capacity: 450 kg min lifting height: 180 mm max lifting height: 780 mm run-in platform dimensions: 2200x680 mm IC index

0XPTPI0023

Motorbike support stand front â&#x20AC;&#x201C; rear, lifting capacity: 300 kg IC index

0XPTPI0012

Motorbike support stand rear, lifting capacity: 250 kg IC index

0XPTPI0010

Motorcycle jack

hydraulic scissors type used to serve off-road motorcycles lifting capacity: 135 kg min lifting height: 355 mm max lifting height: 895 mm IC index

SEA MC135

Motorcycle jack

platform type lifting capacity: 400 kg min lifting height: 180 mm max lifting height: 760 mm run-in platform dimensions: 2200x654 mm IC index

0XPTPI0004

Motorcycle jack

platform type lifting capacity: 600 kg min lifting height: 200 mm max lifting height: 1030 mm run-in platform dimensions: 2700x950 mm hydraulic foot pump included in the kit IC index

OMA 2543C+OMA 2547

Motorbike support stand rear wheel, lifting capacity: 200 kg IC index

0XPTPI0003

Motorbike support stand rear, lifting capacity: 200 kg IC index

0XPTPI0011

155

LIFTS AND JACKS

Rubber pads

IC index

mass

120 mm

110 mm

4 mm

16 mm

0,29 kg

IC index

matches: J.A.B. BECKER / ATH-HEINL / HOFMANN / HERRMANN

17202301MET

01103031

mass

matches:

125 mm

120 mm

90 mm

24 mm

0,30 kg

NUSSBAUM / ATT / AMI

IC index

046405772MET

mass

matches:

mass

matches:

120 mm

113 mm

83 mm

8 mm

22 mm

0,26 kg

MAHA

123 mm

110 mm

10 mm

25 mm

0,30 kg

RAVAGLIOLI / WERTHER

IC index

046405772

IC index

047021850

mass

matches:

mass

matches:

123 mm

110 mm

10 mm

25 mm

0,15 kg

RAVAGLIOLI / WERTHER

100 mm

87 mm

9 mm

21 mm

0,10 kg

RAVAGLIOLI / SIRIO / SPACE

IC index

15.87.410

IC index

15.87.420

mass

matches:

mass

matches:

100 mm

35 mm

17 mm

0,24 kg

ZIPPO

120 mm

44 mm

16 mm

0,30 kg

ZIPPO

matches: STENHOJ / NUSSBAUM / AUTOP / FOG / CAR-O-LINER

IC index

664202

IC index

mass

121 mm

65 mm

9 mm

0,20 kg

IC index

156

169100MET

matches: STENHOJ / AUTOP / FOG / CAR-O-LINER

SK2030-160

664000

mass

122 mm

65 / 88 mm

18 mm

0,18 kg

IC index

LAUNCH120

mass

matches:

mass

160 mm

153 mm

10 mm

28 mm

0,33 kg

KONI / ROMEICO / CAR-O-LINER

120 mm

108 mm

69 mm

32 mm

0,30 kg

matches: LAUNCH / TWIN BUSCH / RP TOOLS / ATH-HEINL / LINCOS / many chinese manufactured lifts

LIFTS AND JACKS

Rubber blocks

IC index

165030

IC index Dimensions

mass

150 x 150 x 70 mm

1,40 kg

matches: J.A.B. BECKER / AUTOP / universal

GK12/8

IC index

165031 Dimensions

mass

150 x 150 x 50 mm

1,10 kg

matches: J.A.B. BECKER / AUTOP / universal

GK12/4

Dimensions

mass

matches:

Dimensions

mass

matches:

120 x 120 x 80 mm

1,10 kg

SLIFT / IME / universal

120 x 120 x 40 mm

1,10 kg

SLIFT / IME / universal

316930

IC index

38.31.829

Dimensions

mass

matches:

Dimensions

mass

matches:

120 x 100 x 50 mm

0,55 kg

MAHA / universal

200 x 100 x 40 mm

0,95 kg

ZIPPO / universal

38.31.830

IC index

PE-900WEISS/KLEIN

Dimensions

mass

matches:

Dimensions

mass

matches:

200 x 100 x 70 mm, with wooden core

1,20 kg

ZIPPO / universal

340 x 132 x 50 mm +/- 5 mm

0,35 kg

universal

Rubber cap

For 2-column EVERT jack, 120 mm in diameter. Per piece. IC index

IC index

EVERTZL420040050B

PE-900WEISS/GROSS Dimensions

mass

matches:

340 x 150 x 100 mm +/- 5 mm

0,75 kg

universal

157

LIFTS AND JACKS

Inspection-pit jacks

Custom-made to match the customerâ&#x20AC;&#x2122;s inspection pit. Available in hydraulic, hydraulic-pneumatic, pneumatic and electric versions, as well as special versions for gearboxes.

Hydraulic jacks Index:

ESK/DKH2,5

ESK/DKH4

ESK/DKH8

ESK/DKH12

ESK/DKH16

ESK/DKH20

Max lifting capacity

2.5 T

12 T

16 T

20 T

Piston stroke

approx. 540 mm

approx. 650 mm

Weight of the jacker kit

60 kg

71 kg

85 kg

113 kg

150 kg

Hydraulic-pneumatic jacks Index:

ESK/DKP-H2,5

ESK/DKP-H6,3

ESK/DKP-H12/600 ESK/DKP-H12/800 ESK/DKP-H14

ESK/DKP-H16

ESK/DKP-H20

Max lifting capacity

2.5 T

6,3 T

12 T

16 T

20T

14 T

Piston stroke

approx. 600 mm

approx. 800 mm

Weight of the jacker kit

75 kg

100 kg

160 kg

175 kg

190 kg

200 kg

227 kg

Jacks moving on the pit bottom

Special gearbox jacks

Index:

ESK/DPHW14

ESK/DPHW16

Max lifting capacity

14 T

16 T

Piston stroke

1500 mm

Index:

ESK/DKH1200S

ESK/DKP-H1200S

Weight of the jacker kit

270 kg

Max lifting capacity

1.2 T

Minimum height

1050 mm

Piston stroke

1200 mm

Weight of the jacker kit

155 kg

Drive type

Hydraulic

Pneumatic hydraulic

Pneumatic pit jacker (DKP 2) Index: Max lifting capacity Piston stroke

158

12 T

ESK/DKP2 2T 500 mm

Axle jack for car lifts Index: Max lifting capacity Piston stroke Weight of the jacker kit

ESK/DKH 2 TM 2T 345 mm 49 kg

Weight of the jacker kit

65 kg

Minimum height

160 mm

Minimum height

80 mm

Slack

130 mm

The support shown in the picture is optional.

COMPRESSORS AND PNEUMATIC EQUIPMENT

PROFESSIONAL PISTON COMPRESSORS

Professional belt-driven piston compressors. Manufactured in the EU. Modern, slow-rotation blocks. CONDOR pressure switches. 2-year warranty. Max pressure: 10 bar. * EVERT 1000/500/15SD model is a 15 bar-version. All KSD models equipped with the star-delta starting module.

We recommend EVERTOIL oil (1-litre packaging) for piston compressors. EVERTOIL oil contains an anti-foaming agent which extends their service life!

Produced

100% in the EU

3 years

full manufacturer’s warranty

New pumps New filters Reduced rotation Up to 20% more efficiency Model EVERT330/100K NEW EVERT420/100K EVERT460/150K NEW EVERT460/200K EVERT530/200K EVERT530/270K EVERT650/200K EVERT690/270K EVERT1000/500K EVERT1500/500K EVERT1000/500/15KSD EVERT2000/500KSD EVERT2000/900KSD EVERT2500/500KSD EVERT2500/900KSD

Power

Tank volume (l)

Suction efficiency (l/min)

2,2 / 3 2,2 / 3 2,2 / 3 2,2 / 3 3/4 3/4 4 / 5,5 4 / 5,5 5,5 / 7,5 7,5 / 10 7,5 / 10 Y∆ 11 / 15 Y∆ 11 / 15 Y∆ 15 / 20 Y∆ 15 / 20 Y∆

100 100 150 200 200 270 200 270 500 500 500 500 900 500 900

332 420 465 465 539 539 650 690 1000 1500 1000 2000 2000 2500 2500

Working / max pressure 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 12 / 14 8 / 10 8 / 10 8 / 10 8 / 10

Number of pistons compression stages 2/1 2/1 2/1 2/1 2/1 2/1 2/2 2/2 2/2 2/2 2/2 4/2 4/2 4/2 4/2

Rev / min

Power supply

1350 1250 1050 1250 1300 1300 1260 1290 1150 1300 1000 1190 1190 1000 1000

230/50Hz/1f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f

PROFESSIONAL PISTON COMPRESSORS ON GALVANISED TANKS The EVERT GK series are professional piston compressors mounted on a galvanised tank. Max pressure: 10 bar. All „SD” models are equipped with the star-delta starting module, which facilitates their start-up and reduces starting starting current. Modern compressor blocks with twostage compression. 10-year warranty for tanks. 10-year warranty for tanks.

3 years

Produced

100% in the EU

full manufacturer’s warranty

New pumps New filters Reduced rotation Up to 20% more efficiency Model EVERTGK530/200K EVERTGK690/270K EVERTGK1000/500K EVERTGK1500/500K EVERTGK1500/500KSD EVERTGK2000/500KSD EVERTGK2500/500KSD

Power

Tank volume (l)

Suction efficiency (l/min)

Working / max pressure

3/4 4 / 5.5 5.5 / 7.5 7.5 / 10 7.5 / 10Y∆ 11 / 15Y∆ 15 / 20Y∆

200 270 500 500 500 500 500

539 692 1000 1500 1500 2000 2500

8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10

Number of pistons compression stages 2/1 2/2 2/2 2/2 2/2 4/2 4/2

Rev / min

Power supply

1300 1290 1150 1150 1150 1190 1000

400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f

159

COMPRESSORS AND PNEUMATIC EQUIPMENT

SLOW-SPEED PISTON COMPRESSORS WITH MAX 15-BAR PRESSURE

15 bar

Produced

100% in the EU

3 years

full manufacturer’s warranty

The EVERT-K series are top-quality piston compressors with slow-rotation operation and a maximum pressure of 15 bar. The slow-rotation mode and topclass components enable these devices to operate in a ratio of 80% working time to 20% resting time in a 24-hour cycle. The ”S” version features the stardelta starting module, which facilitates starting the unit and reduces its starting current. 3-year warranty. 1/2” PREVOST 15-Bar reducer with TR HPM3 pressure gauge is provided with every compressor (K-EVERT series) ordered.

SPECIAL OFFER in the kit

K-EVERT Series compressors – technical data table: Model EVERTK100-450 EVERTK200-450 EVERTK200-600 EVERTK300-600 EVERTK300-700 EVERTK300-700S EVERTK500-700S EVERTK500-1000S EVERTK500-1500S

Power

Tank volume (l)

2.2 / 3 2.2 / 3 3/4 3/4 4 / 5.5 4 / 5.5 Y∆ 4 / 5.5 Y∆ 5.5 / 7.5 Y∆ 7.5 / 10 Y∆

100 200 200 300 300 300 500 500 500

Suction efficiency (l/min) 450 450 600 600 700 700 700 1000 1500

Working / max pressure 12 / 14 12 / 14 12 / 14 12 / 14 12 / 14 12 / 14 12 / 14 12 / 14 12 / 14

Number of pistons compression stage 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2

Rev / min

Power supply

840 840 1170 1170 970 970 970 970 1020

400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f

EVRT piston compressors HD series

POLISH – noise: 80 dB PRODUCT – available versions: 10/15-bar – power supply: 400 V – 2-year warranty for pump and pressure switch – 3-year warranty for electric engine – 10-year warranty for tank (100% galvanised inside and outside). IC index EVERTHD40-200-510 EVERTHD40-270-510 EVERTHD50-270-700 EVERTHD75-270-900 EVERTHD75-500-900 EVERTHD100-500-1200 EVERTHDT50-270-580-15 EVERTHDT100-500-1100-15

Volume (l) 200 270 270 270 500 500 270 500

Suction efficiency (l/min) Max pressure (bar) 510 510 700 900 900 1200 580 1150

10 10 10 10 10 10 15 15

Power (kW) 3 3 4 5.5 5.5 7.5 4 7,5

Rev. (1/min) 1200 1200 1130 1015 1015 970 790 1150

II. cylinder / compression stage 2/1 2/1 3/1 2/1 2/1 2/1 2/2 3/2

Dimensions: LxWxH 145x 58x 96 145x58x96 148x 50x 102 148x 50x 103 190 60x 118 190 60x 119 148x50x103 190x60x119

Weight (kg) 135 165 175 210 245 250 205 304

Piston compressors

– 2 cylinders – 2-year warranty – all compressor models are equipped with pumps with cast-iron cylinders where pistons with a multi-ring seal system are used – compressors: GD49, GD59, GD60, GD70 and higher are equipped with a double compression stage pump IC index 0XGD28-100-320 0XGD28-150-350 0XGD28-150-350/230V 0XGD38-150-395 0XGD38-200-475 0XGD49-200-515 0XGD49-270-515 0XGD59-270-650 0XGD59-270-560-15 0XGD60-270-830 0XGD60-500-830 0XGD70-500-1210 0XGD70-500-1100-15

160

Volume (l) 100 150 150 150 200 200 270 270 270 270 500 500 500

Noise (dB) 78 78 78 79 80 80 80 81 81 82 82 82 82

Suction efficiency (l/min) 320 350 350 394 476 515 515 653 560 830 830 1210 1100

Max pressure (bar) 10 10 8 10 10 10 10 10 15 10 10 10 15

Power (kW) 2.2 2.2 2.2 2.2 3 3 3 4 4 5.5 5.5 7.5 7,5

Rev. (1/min) 1540 1580 1580 1100 1400 1450 1450 1400 1100 1450 1450 1300 1000

Dimensions LxWxH 107x 39x 80 138x 44x 100 138x 44x 100 138x 44x 105 150x 45x 100 150 x 45 x 100 152 x 59 x 126 152 x 59 x 126 152 x 59 x 126 152 x 59 x 130 203 x 68 x 140 203 x 68 x 140 203 x 68 x 140

Power supply (V) 400 400 230 400 400 400 400 400 400 400 400 400 400

Compression stage 1 1 1 1 1 2 2 2 2 2 2 2 2

Weight (kg) 69 85 86 85 125 128 140 160 160 220 280 285 285

COMPRESSORS AND PNEUMATIC EQUIPMENT

PROFESSIONAL PISTON COMPRESSORS ON VERTICAL TANKS Professional piston compressors mounted on vertical tanks. Manufactured in the EU. Max pressure: 10 bar.

Advantages of EVERT compressors: – max pressure: 10 bar – 2-year warranty – high-quality low-speed industrial blocks manufactured in the EU – compressor belt pulley sheathing made of metal for better cooling – efficient compressor pump cooling system, large crankcase – more oil, longer service life Power (kW) 2,2 / 3 2,2 / 3 3/4 4 / 5,5

Model EVERT390/150/P230V EVERT390/150/P EVERT590/200/P EVERT690/270K/P NEW

Tank volume (l)

Suction efficiency (l/min)

150 150 200 270

390 390 590 690

Working / maximal pressure 8 / 10 8 / 10 8 / 10 8 / 10

Number of pistons / compression stages 2/1 2/1 2/2 2/2

Rev / min

Power supply

1050 1050 1400 1420

230/50Hz/1f 400V/50Hz/3f 400V/50Hz/3f 400V/50Hz/3f

Vertical piston compressors – max pressure: 10 bar – 2 cylinders – 2-year warranty! Volume (l) 200 270 270 270

IC index 0XGDV38-200-475 0XGDV49-270-515 0XGDV59-270-650 0XGDV60-270-830

Noise (dB) 80 80 81 82

Effective efficiency (l/min) 476 515 653 830

EVERT rotary screw compressors

Revs. (1/min) 1400 1450 1400 1450

Power (kW) 3 3 4 5,8

No. of compression stages 1 2 2 2

Dimensions LxWxH 55x 55x 150 65x 65x 165 65x 65x 172 65x 65x 175

Weight (kg) 125 134 140 148

POLISH PRODUCT

HD EVERTHDVT series – EVERTHD compressor + dehumidifier + pre-filter + L26S control panel

Available in 8-, 10- and 13-bar versions in various configurations. Contact your Inter Cars representative for more details. Warranty for EVERT HD compressors: 5-year warranty for rotary screw compressor* 10-year warranty for pressure tank - power supply: 400 V IC index EVERTHD4/10-270* EVERTHD5,5/10-270* EVERTHD7,5/10-270* EVERTHD7,5/10-500* EVERTHD11/10-500* EVERTHD15/10-500*

Tank capacity (l) (galvanised) 270 270 270 500 500 500

Noise (dB) 69 68 70 70 70 70

* The HDVT version stands for a rotary screw compressor with an in-built refrigeration dehumidifier.

Effective efficiency (l/min)/ (m3/h) 470/28.2 720/43.0 900/54.0 900/54.0 1450/87.0 1800/108

Max pressure (bar)

Engine power (kW)

10 10 10 10 10 10

4 5.5 7.5 7.5 11 15

Dimensions: LxWxH 152 x 60 x 108 167 x 76 x 125 167 x 76 x 125 194 x 76 x 132 194 x 76 x 132 194 x 76 x 132

Weight (kg) 220 270 285 340 360 378

EVERT HD compressors are equipped with a fully-galvanised inner/outer pressure tank (10-year warranty). EVERT rotary screw compressors (HD series) are unique on the Polish market. They are the only units with a corrosion-protected tank and modern control panel (L26S). In addition to the panel, they are equipped with a pressure transducer. More advantages of the L26S panel and its operation: – the panel is equipped with an alphanumeric LCD display – messages regarding its operation are provided in 8 languages (Polish, English, German, French, Italian, Spanish, Turkish, Portuguese) – its integrated clock provides the option to set 3 operational schedules for one day per week – equipped with an RS232 port which allows to be connected to your computer in order to monitor the unit and its operation – can be linked with the GSM module – the user is texted (SMS) on the unit and its operation – automatic compressor start-up after power failure – can be cascade-linked with L26S The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

161

COMPRESSORS AND PNEUMATIC EQUIPMENT

We recommend EVERTOIL/S oil (5-litre pack) for rotary screw compressors. VDL46 oil contains an antifoaming agent which extends their service life!

EVERT rotary screw compressors PLUS series IC index EVERT2,2/200 EVERT2,2/200/D EVERT3/200 EVERT3/200/D EVERT4/200 EVERT4/200/D EVERT5,5/200 EVERT5,5/200/D EVERT5,5/270 EVERT5,5/270/D EVERT5,5/500/D ES4000 EVERT7,5/500 EVERT7,5/500/D EVERT11/500 EVERT11/500/D EVERT15/500 EVERT15/500/D

Power (kW) / (Hp) 2,2 / 3 2,2 / 3 3/4 3/4 4 / 5,5 4 / 5,5 5,5 / 7,5 5,5 / 7,5 5,5 / 7,5 5,5/7,5 NEW

5,5 / 7,5 7,5 / 10 7,5 / 10 11 / 15 11 / 15 15 /20 15 / 20

Efficiency (l/min) Pressure (bar) Volume level (dB) 240 10 61 240 10 61 320 10 61 320 10 61 470 10 62 470 10 62 600 10 64 600 10 64 600 10 64 600 10 64 COMPRESSORS EQUIPMED WITH CONTROL PANEL ES 4000 BASIC 847/697* 8/10* 64 1140/997/780* 8/10/13* 65 1140/997/780* 8/10/13* 65 1620/1417/1152* 8/10/13* 68 1620/1417/1152* 8/10/13* 68 1860/1680/1332* 8/10/13* 69 1860/1680/1332* 8/10/13* 69

Horizontal tank (l) 200 200 200 200 200 200 200 200 270 270

Refrigeration dehumidifier NO YES NO YES NO YES NO YES NO YES

500 500 500 500 500 500 500

YES NO YES NO YES NO YES

* The order has to be made for determined version of the compressor. Customer choose maximum pressure and efficiency. Higher efficiency means lower maximum pressure.

EVERT Plus series rotary screw compressors are compact units designed for continuous operation. They are equipped with the modern and intuitive ES 4000 Basic control panel with an analogue display. The panel shows pressure settings, current pressure, the operating temperature (oil), inspection alerts, the number of hours worked, error messages and other prompts. Advantages of EVERT Plus rotary screw compressors: – 5-year warranty for screw compressor – the applied industrial technology allows for their constant operation – the screw modules (C40 and C55) with their increased performance enable the compression of up to 95% of sucked-in air – extremely low oil content in compressed air (up to max 5 mg in m3) – EVERT Plus rotary screw compressors are covered with 24h service. Response time – up to max 48 hours.

Screw compressors EVERTG

NEW

EVERTG screw compressors are complete compressed air stations equipped with a 500liters capacity tank, a refrigerant dryer and a set of line filters, so they are particularly recommended for bodyshops. The modern ES3000 control panel allows a variety of compressor settings, combining it in a cascade system with other compressors, or auto-restart in the case of a voltage failure.

IC index EVERTG7,5/500/D EVERTG11/500/D EVERTG15/500/D

Power (kW) / (Hp) 7,5 / 10 11 / 15 15 / 20

Efficiency (l/min) 1153/1000/810* 1665/1435/1210* 2000/1790/1480*

Pressure (bar) 8/10/13* 8/10/13* 8/10/13*

Volume level (dB) 64 63 65

Horizontal tank (l) 500 500 500

Refrigeration dehumidifier YES YES YES

* The order has to be made for determined version of the compressor. Customer choose maximum pressure and efficiency. Higher efficiency means lower maximum pressure.

Screw compressors EVERTD

NEW

EVERTD screw compressors are a modern line of compressors with direct drive and variable speed operating mode. Because of the built-in inverter, the speed and efficiency are automatically adjusted to the current consumption of compressed air, which results in energy savings of up to 40% compared to a fixed-speed compressor. All EVERTD compressors work in the pressure range from 5.5 to 12.5 bar, which allows you to use one compressor for many applications.

IC index EVERTD7,5/500/D/IVR EVERTD11/500/D/IVR EVERTD15/500/D/IVR

162

Power (kW) / (Hp) 7,5/10 11/15 15/20

Efficiency (l/min) 272 - 1260 250 - 1862 260 - 2287

Pressure (bar) 5,5 - 12,5 5,5 - 12,5 5,5 - 12,5

Volume level (dB) 62 64 65

Horizontal tank (l) 500 500 500

Refrigeration dehumidifier YES YES YES

COMPRESSORS AND PNEUMATIC EQUIPMENT

Vertical tanks for compressed air

Tanks for compressed air are equipped with all accessories required for use (a safety valve, manometer, manometric valve, ball valves). Every tank is CE-certified and provided with a set of documents necessary for registration at the Technical Inspection Authority (pol. Urząd Dozoru Technicznego, UDT).

Index

Model

Working pressure

Tank diameter

Height

Weight

36118 36111 36139

vertical tank – 500 l vertical tank – 1000 l vertical tank – 2000 l

11 bar 11 bar 11 bar

620 mm 800 mm 1100 mm

2150 mm 2350 mm 2545 mm

125kg 235 kg 430 kg

Evert-Dry refrigeration dehumidifier

Evert-Dry refrigeration dehumidifiers are state-of-the-art units used to eliminate moisture from compressed air; 3°C is their dew point. This temperature allows for the condensation and elimination of most moisture from the air. Index

Power supply

Working pressure

EVERT-DRY45 EVERT-DRY60 EVERT-DRY85 EVERT-DRY130 EVERT-DRY165

230V / 50Hz / 1F 230V / 50Hz / 1F 230V / 50Hz / 1F 230V / 50Hz / 1F 230V / 50Hz / 1F

13 bar 13 bar 13 bar 13 bar 13 bar

Efficiency (l/min) Dimensions (cm) 750 1000 1420 2200 2750

Cyclone separators and AirPress micro-filters

Airpress cyclone separators are designed for purifying compressed air from condensate that threatens installations, actuators and pneumatic tools. The use of a cyclone separator results in a condensate reduction in the air above 98%. Thanks to this, we will get the 8th class of air in terms of moisture content according to ISO 8573-1. As most of the moisture remains in the separator, the best solution is to install an automatic condensate drain. Cyclone separators are devices for cleaning the air mechanically by introducing it into a whirl movement, therefore they do not require replacement of operating elements. This makes the investment a one-off cost for the user serving many years. Airpress offers many possibilities for cyclone separator configuration with automatic and manual condensate drains. Air connections from 3/8 „to 3”. Efficiency from 120 Nm3 to 2850 Nm3 per hour and maximum pressure up to 16 bar. The separator housings are made of aluminum and the stainless steel inserts protect them against corrosion.

35x50x45 35x50x45 35x50x45 35x50x45 37x50x77

Weight 19kg 20kg 25kg 27kg 44kg

filtration should be graded to ensure that the filters are efficient and the cartridges have an adequate service life. The element that is used in micro-filters are cartridges. Replacement of the cartridge should take place after a maximum of 800 hours worked, but at least every 6 months.

In order to further purify compressed air from solid particles, we offer a whole range of micro filters depending on the degree of purification, air flow or connection, so that each compressor can be selected optimally. Airpress filters purify the air in various stages from 15 μm to 0.005 μm, so that air quality can be adapted to each application. Airpress micro-filters purify compressed air from water, oil and pollen particles. Depending on whether the air is used in a car workshop, paint shop, food industry or the chemical degree of the required air class is different. In the case of purifying compressed air to the level of, for example, 0.01 μm, the

Index

Name

MAX pressure

MAX flow

water/oil filtration degree

oil residues filtration degree down to:

45131 45132 45133

Separator cyklonowy 1/2” Separator cyklonowy 3/4” Separator cyklonowy 1”

16 BAR 16 BAR 16 BAR

2585 l/min 3915 l/min 6085 l/min

0,5-5 g/m3 0,5-5 g/m3 0,5-5 g/m3

Index

Name

MAX pressure

MAX flow

45111 45111/R 45121 45140 45150 45112 45112/R 45122 45141 45151 45113 45113/R 45123 45142 45152

Mikrofiltr 1/2” P Mikrofiltr 1/2” R Mikrofiltr 1/2” M Mikrofiltr 1/2” S Mikrofiltr 1/2” A Mikrofiltr 3/4” P Mikrofiltr 3/4” R Mikrofiltr 3/4” M Mikrofiltr 3/4” S Mikrofiltr 3/4” A Mikrofiltr 1” P Mikrofiltr 1” R Mikrofiltr 1” M Mikrofiltr 1” S Mikrofiltr 1” A

16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR 16 BAR

1300 l/min 1300 l/min 1300 l/min 1300 l/min 1300 l/min 2000 l/min 2000 l/min 2000 l/min 2000 l/min 2000 l/min 3300 l/min 3300 l/min 3300 l/min 3300 l/min 3300 l/min

10 µm 10 µm 10 µm water/oil and solid particles filtration degree 3 µm 1 µm 0,1 µm 0,01 µm 0,01 µm 3 µm 1 µm 0,1 µm 0,01 µm 0,01 µm 3 µm 1 µm 0,1 µm 0,01 µm 0,01 µm

oil residues filtration degree down to: ---0,5 mg/m3 0,1 mg/m3 0,01 mg/m3 0,005 mg/m3 ---0,5 mg/m3 0,1 mg/m3 0,01 mg/m3 0,005 mg/m3 ---0,5 mg/m3 0,1 mg/m3 0,01 mg/m3 0,005 mg/m3

163

COMPRESSORS AND PNEUMATIC EQUIPMENT

164

IC index

Description

4304205

Spiral hose (PU) 8 x 5 mm reinforced 5 m

4304206

Spiral hose (PU) 8 x 5 mm reinforced 10 m

4304207

Spiral hose (PU) 8 x 5 mm reinforced 15 m

4304208

Spiral hose (PU) 12 x 8 mm reinforced 5 m

4304210

Spiral hose (PU) 12 x 8 mm reinforced 10 m

4304211

Spiral hose (PU) 12 x 8 mm reinforced 15 m

4304222

Spiral hose (PU) 16 x 12 mm reinforced 10 m

4304223

Spiral hose (PU) 16 x 12 mm reinforced 15 m

IC index

Description

46840 / 4301507

Hose quick-coupling 6 mm

46801 / 4301509

Hose quick-coupling 9 mm

46827 / 4301508

Hose quick-coupling 13 mm

IC index

Description

46841 / 4301501

Quick-coupling 1/4” inner thread

46849 / 4301502

Quick-coupling 3/8” inner thread

46838 / 4301503

Quick-coupling 1/2” inner thread

IC index

Description

46842 / 4301505

Quick-coupling 1/4” outer thread

46847 / 4301504

Quick-coupling 3/8” outer thread

46848 / 4301506

Quick-coupling 1/2” outer thread

IC index

Description

4300001

Short blow gun

4300011

Long blow gun

4300002

Blast gun with a turbo-nozzle

4300021

Gun for pumping wheels (hobby)

42078

Professional pumping gun (TG-18)

IC index

Description

46845 / 4311532

Tool connect fitting 1/4” outer thread

46821 / 4311533

Tool connect fitting 3/8” outer thread

46815 / 4311535

Tool connect fitting 1/2” outer thread

IC index

Description

46844 / 4311552

Tool connect fitting 1/4” inner thread

46822 / 4311553

Tool connect fitting 3/8” inner thread

46816 / 4311534

Tool connect fitting 1/2” inner thread

IC index

Description

46843 / 4311536

Connect fitting for hose 6 mm

46861 / 4311562

Connect fitting for hose 9 mm

46843 / 4311536

Connect fitting for hose 13 mm

COMPRESSORS AND PNEUMATIC EQUIPMENT

Hose / pipe

for PVC compressed air, maximum pressure: up to 16 bar, length: 25 m, transparent, reinforced, wall thickness: 25 mm IC index

Professional anti-static hose

max pressure: 20 bar, nitrile, diameter: 8 mm, fastened with a quick-coupler and plug, length: 10 m IC index

40400

(filter, reducer, oiler), pressure: 10 bar, flow: 2250 l/min IC index

45214

(filter, reducer, oiler), pressure: 10 bar, flow: 3500 l/min

45234

0XTY037

max pressure: 20 bar, nitrile, diameter: 8 mm, fastened with a quick-coupler and plug, length: 20 m

40402

0XPTMB0001

Drop-feed oiler

screwed directly onto the unit; thread: 1/4”

Professional anti-static hose

nitrile, max pressure: 20 bar, diameter: 10 mm, length: 10 m with quick-couplers IC index

40404

3/8” air preparation kit (filter, reducer, oiler), pressure: 10 bar, flow: 1625 l/min

45224

3/4” air preparation kit (filter, reducer, oiler), pressure: 10 bar, flow: 4500 l/min

IC index

(filter + oiler + reducer); thread size: 1/4”

45481

Professional anti-static hose

max 12000 rpm 0.9 kg

IR4151-HL

45244

Pneumatic hose reel hose length: 15 m IC index

0XTY038

Air preparation kit

(filter + oiler + reducer); thread size: 3/8” IC index

Rotary-oscillatory grinder IC index

with a nozzle (100 mm)

Air preparation kit

IC index

12.5 mm

Blow gun

with a long nozzle (300 mm)

IC index

46568/S25

IC index

Blow gun IC index

10 mm

IC index

1/2” air preparation kit IC index

8 mm

46567/S25

IC index

1/4” air preparation kit

Inner diameter

46566/S25

0XPTMB0002

0XPTJC0067

Air preparation kit

(filter + oiler + reducer); thread size: 1/2” IC index

0XPTMB0003

Filter, dehydrator

screwed directly onto the unit; thread: 1/4” IC index

45207

165

COMPRESSORS AND PNEUMATIC EQUIPMENT

Pneumatic reel

reel with 30-m hose, diameter: 12x8 m, max pressure: 15 bar IC index

hose (PU) 12x8 mm – 15 bar – 9 m

46572

IC index

Pneumatic reel

Polyurethane pneumatic hose

hose (PU) 12x8 mm – 15 bar – 8 m IC index

46579

Pneumatic reel 46599

size 9,5x13 mm, length 15 m, pressure up to 15 bar IC index

Pneumatic reel

9 m, cable diameter: 8 mm, 1/4” connector, working pressure: 10 bar

4822404

IC index

Pneumatic reel 4822403

166

CPZWIJADLO1

Pneumatic reel

14 m + 1 m, cable diameter: 10 mm, 1/4” connector, working pressure: max 15 bar

15 m, cable diameter: 8 mm, 1/4” connector, working pressure: max 15 bar IC index

10 m, cable diameter: 12x8 mm, 1/4” connector, max pressure: 15 bar, composite housing, polyurethane hose IC index

4822402

Pneumatic reel

12 m, cable diameter: 8 mm, 1/4” connector, working pressure: max 15 bar

Pneumatic reel

46578

Pneumatic reel

8 m, cable diameter: 10 mm, 1/4” connector, working pressure: 15 bar

IC index

46574-2

Polyurethane pneumatic hose

HL-TA10 (20 bar, 3/8”)

IC index

NEW

size 8x12 mm, length 12 m, pressure up to 15 bar IC index

IC index

46576

IC index

4822405

4822406

Pneumatic reel

16 m, cable diameter: 14x10 mm, 3/8” connector, max pressure: 15 bar, composite housing, polyurethane hose IC index

CPZWIJADLO2

COMPRESSORS AND PNEUMATIC EQUIPMENT

3/8”DRIVE MINI SUPER DUTY AIR RATCHET WRENCH Max. torque: 41Nmh Overall length: 128mm Weight: 0,45kg IC index

KAAE1202

1/2“ DRIVE SUPER DUTY AIR RATCHET WRENCH Max. torque: 102Nm Overall length: 266mm Weight: 1,2kg IC index

KAAF1605

1/2“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 678Nm Overall length: ONLY 97mm Weight: 1,65kg IC index

KAAQ1650

3/4“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 1016Nm Overall length: 234mm Weight: 4,4kg IC index

KAAA2475

1“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 2440Nm Overall length: 510mm Weight: 12kg IC index

KAAB3218

AIR STRAIGHT DIE GRINDER Collet chuck: 6mm / 1/4” Free speed: 22000RPM Overall length: 167mm Weight: 0,6kg IC index

KAKA0822

3/8”DRIVE SUPER DUTY AIR RATCHET WRENCH Max. torque: 102Nm Overall length: 266mm Weight: 1,2kg IC index

KAAF1205

1/2“ DRIVE SUPER DUTY AIR ANGLE IMPACT WRENCH Max. torque: 244Nm Overall length: 341mm Weight: 1,8kg IC index

KAAH1620

1/2“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 949Nm Overall length: 191mm Weight: 2,3kg IC index

KAAA1660

1“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 2440Nm Overall length: 390mm Weight: 11kg IC index

KAAA3218

1“ DRIVE SUPER DUTY AIR IMPACT WRENCH Max. torque: 2712Nm Overall length: 492mm Weight: 8kg IC index

KAAD3220

HEAVY DUTY AIR IMPACT HAMMER Blow per minute: 3200 Chisel shank opening (HEX): 10mm Overall length: 171mm Weight: 1,6kg IC index

KAHA3217

Flat chisel IC index

Panel cutter IC index

KAJA18D1

IC index

Sheet metal himmer IC index

Taper punch

KAJA18E1

KAJA18A1 KAJA18B1

Spot weld breaker IC index

KAJA18C1

167

PROFESSIONAL IMPACT WRENCHES CP7736P

Impact wrench 1/2”

1/2” IMPACT SOCKET KIT (14 PCS.) FOR FREE DIMENSIONS: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26 AND 27 MM

working torque: 69–770 Nm maximal torque: 900 Nm weight: 2.58 kg

CP7748P

Impact wrench 1/2”

working torque: 72–779 Nm maximal torque: 1250 Nm weight: 2.1 kg

– OUR POWERFUL 1/2” impact wrench working torque: 135–704 Nm maximal torque: 1300 Nm weight: 1.8 kg

Impact wrench 3/4”” NEW

ONLY 159 MM IN LENGTH

working torque: 200–900 Nm maximal torque: 1420 Nm weight: 3 kg

Impact wrench 1”

long spigot working torque: 500–2000 Nm maximal torque: 2600 Nm weight: 11.6 kg

0XCPSET01

CP7748T TOOL BAG FOR FREE

Impact wrench 1/2”

working torque: 72–779 Nm maximal torque: 1250 Nm weight: 2.1 kg

CP7749P

CP7782-6

Impact wrench 1/2”

1/2” IMPACT SOCKET KIT (3 PCS.) FOR ALUMINIUM WHEELS FOR FREE DIMENSIONS: 17, 19, 21 MM

working torque: 69–770 Nm maximal torque: 900 Nm weight: 2.58 kg

1/2” IMPACT SOCKET KIT (3 PCS.) FOR ALUMINIUM WHEELS FOR FREE DIMENSIONS: 17, 19, 21 MM

CP7762

CP7736PR

CP KIT

IMPACT WRENCH [CP7736] (MAX TORQUE: 900 NM) + ANGULAR SCREWDRIVER [CP886H] + STANDARD GRINDER [CP872] + SOCKET KIT [CPSS4114] (14 PCS.) + OIL

CP7732C

MINI 1/2” impact wrench working torque: 138–420 Nm maximal torque: 610 Nm weight: 1.3 kg

CP7769

POWERFUL 3/4” impact wrench

SOCKET KIT (8 PCS.) FOR FREE (3/4”, SIZES: 26, 27, 29, 30, 32, 35, 36, 38)

working torque: 407–1464 Nm maximal torque: 1950 Nm weight: 3.4 kg

CP886H

Angular ratchet wrench 1/2”

working torque: 14–68 Nm maximal torque: 68 Nm weight: 1.1 kg

0XCPSET02

CP KIT

IMPACT WRENCH [CP7749] (MAX TORQUE: 1300 NM) + ANGULAR WRENCH [CP886HP] + SOCKET KIT [CPSS4114] (14 PCS.) + CP GLOVES

THE SIZE DOES MATTER

THE NEW COMPACT CP WRENCHES

CP7711 Handy, powerful, easy-to-use 1/4” impact wrench Working torque: 9–80 Nm Maximal torque: 110 Nm Length: 140 mm Ultra light Weight: 0.53 kg

CP7737 Very powerful 1/2” angular wrench Working torque: 34–224 Nm Maximal torque: 300 Nm Working depth: 88 mm Length: 240 mm Weight: 1.12 kg

BATTERY TOOLS

3-year warranty

CP8848 1/2” impact wrench, 1050 Nm

SPECIAL OFFER – FLASHLIGHT OR PROFESSIONAL GLOVES FOR FREE

POWER AND PERFORMANCE

1/2” spindle with a safety ring maximal torque: 1050 Nm weight: 3.1 kg (battery included) body length: 243 mm 20 V CP20XP Li-Ion 4 h battery

while stocks last, sent free of charge after your sale notification to ic.diagnostyka@intercars.eu

Reduced vibration

CP8818 1/4” impact screwdriver, 115 Nm POWER AND VERSATILITY

1/4” mounting bracket maximal torque: 115 Nm weight: 1.1 kg (the battery included) length: 161 mm 12-V CP12XP Li-ion 1.5 Ah battery 85 ft.Ib 115 Nm

ssssss www.cp-cordless.com

Reduced vibration

The quoted prices are VAT-excluded. Subject to technical changes, colour modifications and printing errors without prior notice. Noise and vibration levels according to the EN60745 standard. All parameters are factual and compliant. More information is available at www.cp-cordless.com * The kit consists of a tool, two batteries and charger.

COMPRESSORS AND PNEUMATIC EQUIPMENT

Pneumatic wrench 1” HD-3400

Pneumatic wrench 1” HD-3400ST

– Square 1” – Max torque: 3390 Nm – Air demand: 560 l/min – Pin length: 8” – Working pressure: 6.4 bar – Weight: 13.5 kg IC index

– Square 1” – Max torque: 3390 Nm – Revolutions: 3400 rpm – Air demand: 200 l/min – Overall length: 302 mm – Working pressure: 6.4 bar – Weight: 11 kg

0XGDNP1062

IC index

Pneumatic wrench 1/2” HD-1356 composite

Pneumatic wrench 1/2” HD-675M

– Square 1/2” – Max torque: 1356 Nm – Air demand: 380 l/min – Working pressure: 6.4 bar – Revolutions: 1000 rpm – Weight: 2.05 kg IC index

– Square 1/2” – Max torque: 675 Nm – Revolutions: 7500 rpm – Air demand: 164 l/min – Working pressure: 6.2 bar – Weight: 1.4 kg – Length: 122 mm – 1/4” connection

0XGDNP1054T

IC index

Angular pneumatic wrench 1/2” HD-81

0XGDNP1082

Angular pneumatic wrench HD-40MZ (set)

– Square 1/2” – Max torque: 81 Nm – Revolutions: 160 rpm – Air demand: 110 l/min – Working pressure: 6.4 bar – Weight: 1.3 kg IC index

0XGDNP1080

– Square 1/2” – Max torque: 40 Nm – Air demand: 110 l/min – Working pressure: 6.4 bar – Weight: 0.6 kg The kit contains: – loop-through sockets: 8/10/12/13/14/15/16/17/18/19/21 mm. – 3 interchangeable pins: 1/4”, 3/8”, 1/2” – adapter for bits and 10 bits

0XGDNP1071

IC index

0XGDNP1072

HDX refrigeration dehumidifiers

HDX compressed air refrigeration dehumidifiers provide clean compressed air for compressed air receivers. HDX dehumidifiers feature the following advantages: – aluminium heat exchanger filled with R134a gas – dew point at 3°C – integrated fine filter (0.1 μm) – integrated final filter (0.01 μm) – automatic condensate ejector – dew point indicator and filter contamination indicator

Code 0XGDOZ6048 0XGDOZ6049 0XGDOZ6050 0XGDOZ6051 0XGDOZ6052 0XGDOZ6054 0XGDOZ6055 0XGDOZ6056 0XGDOZ6057 0XGDOZ6058

174

Type

Efficiency (l/min)

HDX-25 HDX-40 HDX-55 HDX-100 HDX-160 HDX-190 HDX-210 HDX-310 HDX-380 HDX-500

390 640 890 1670 2590 3170 3500 5080 6250 8250

Max pressure (bar) Power consumption (kW) 16 16 16 16 16 16 16 16 16 16

0.23 0.23 0.29 0.29 0.31 0.59 0.59 0.7 1 1

Voltage (V)

Filter type

Connection (inch)

Dimensions (cm)

Weight (kg)

230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50

GO50X/Y GO50X/Y GO50X/Y GO100X/Y GO150X/Y GO200X/Y GO200X/Y GO300X/Y GO500X/Y GO500X/Y

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2"

42x36x56 42x36x56 42x36x56 48x48x84 48x48x84 48x48x84 51x61x87 51x61x87 51x61x87 75x70x117

32 32 32 51 53 55 78 83 86 120

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

Pneumatic single-point jack

Off-road jack

(balloon), 2 t, lifting height: 115–430 mm. IC index

0XPTPH0053

Pneumatic single-point jack 0XPTPH0055

0XPTPH0032

IC index

(balloon), lifting capacity: 3.5 t, min/max height: 150–390 mm, balloon diameter: 340 mm, operational pressure: 6 bar, weight: 23 kg

EVERT PM1

(balloon), lifting capacity: 8 t, min/max height: 150–350 mm, balloon diameter: 406 mm, operational pressure: 8 bar, weight: 35 kg

EVERT PM3

0XPTPH0056

Pneumatic single-point jack

(balloon), lifting capacity: 2 t, min/max height: 15–330 mm, balloon diameter: 190 mm, operational pressure: 6 bar, weight: 12 kg IC index

Pneumatic single-point jack IC index

IC index

(balloon), 2 t, lifting height: 200–560 mm.

Pneumatic single-point jack IC index

0XPTPH0031

Pneumatic single-point jack

(balloon), 2 t, lifting height: 115–430 mm. IC index

IC index

EVERT PM2

Pneumatic „balloon” jack

lifting capacity: 4.5 t, min/max height: 145/380 mm, balloon diameter: 340 mm, operational pressure: 6 bar, weight: 28 kg IC index

EVERT PM4

PPS-5 jack

This jack is designed to lift passenger vehicles and vans in order to dismount or mount all wheels at the same time. With saddles and short ramps. With saddles: IC index

UNITROL PPS-5-LAP

Without saddles: IC index

pneumatic power supply unladen weight lifting height external dimensions

UNITROL PPS-5

height at rest operating temperature range working pressure load capacity

0,7 ÷1 MPa ( 7÷10 bar) 400 kg 380 mm 2450 mm x 1400 mm (no runs-in) 2450 mm x 1950 mm (with runs-in) 80 mm - 4 °C ÷ + 40 °C up to 0.7 MPa (up to 7 bar) 2000 kg

175

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

Run-in platform

1 piece, lifting capacity: 2 t/pair, weight: 5.6 kg, dimensions: 1050x320x838 mm, made of metal IC index

1 piece, lifting capacity: 3 t/pair, weight: 13 kg, dimensions: 1120x415x310 mm, made of metal

0XPTPI0017

IC index

Run-in platform

Anti-slip ramp

1 piece, lifting capacity: 6 t/pair, weight: 8.5 kg, dimensions: 999x296x220 mm, made of plastic IC index

foldable, under vehicle wheels IC index

0XPTPI0019

lifting capacity: 350 kg, 1 piece, weight: 5.6 kg, length: 2025 mm, made of aluminium

made of plastic, dimensions: 560x200x130 mm, 1 piece

0XPTPI0008

IC index

Run-out ramp (Trap)

lifting capacity: 340 kg, 1 piece, weight: 7.2 kg, length: 2260 mm, made of aluminium

0XPTPH0039

Aluminium foldable platform

grooved, two-stage, max load 200 kg

0XPTPI0022

for transport / service, 1 piece, size: 12”, equipped with a foot pump for autonomous vehicle lifting, lifting capacity 680 kg IC index

made of rubber, dimensions: 230x180x140 mm, 1 piece

0XPTOG0005

Wheel lock

made of steel, Truck, dimensions: 326x204x170 mm, 2 pieces in the kit IC index

176

0XPTPI0006

Motorcycle drive-through lift 1-t trapezoidal jack lifting capacity: 680 kg, height: min 140 mm, max 410 mm

0XPTOG0009

IC index

for transport / service, 1 piece, size: 9”, equipped with a foot pump for autonomous vehicle lifting, lifting capacity 680 kg IC index

IC index

Wheel lock

made of rubber, dimensions: 105x75x75 mm, 2 pieces in the kit

0XPTOG0006

Wheel lock

made of steel, Truck, dimensions: 230x220x12 mm, 2 pieces in the kit IC index

0XPTTR0003

Wheel lock

made of rubber, dimensions: 240x190x165 mm, 1 piece

0XPTOG0011

0XPTPH0028

Hydraulic rollers

NEW

Wheel lock

0XPTPH0027

2-t trapezoidal jack

0XPTPI0002

0XPTTR0002

Wheel lock

IC index

Hydraulic rollers

0XPTPI0005

Run-in platform

under vehicle wheels from rough terrain – made of plastic, dimensions: 1200x340x90, 1 piece OFF-ROAD IC index

IC index

0XPTPH0057

Run-in ramp

Run-in ramp IC index

0XPTPI0018

IC index

made of steel, dimensions: 105x85x90 mm, 2 pieces in the kit

0XPTOG0007

IC index

0XPTOG0008

Wheel lock

made of rubber, dimensions: 200x150x100 mm, 1 piece IC index

0XPTOG0004

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

Cranes for engines

OMA 589

OMA 586G

IC index OMA 589 OMA 586G 0XPTPJ0006 0XOM44018 OMA 590 OMA 587G 0XPTPJ0009 0XOM44020 OMA 583

0XPTPJ0006

0XOM44018

Type Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

OMA 590

Lifting capacity 500 kg 500 kg 1000 kg 1000 kg 1000 kg 1000 kg 2000 kg 2000 kg 2000 kg

Crane stabiliser

0XOM44020

Feature foldable foldable, low-profile foldable

Lifting range 2070 mm 2005 mm 25–2000 mm

foldable foldable, low-profile foldable non-foldable foldable

2400 mm 2390 mm 25–2300 mm

OMA 583

Manufacturer OMA OMA PROFITOOL OMEGA OMA OMA PROFITOOL OMEGA OMA

530–3280 mm

lifting capacity: 600 kg

0XOM90150

IC index

Stand for engines

0XPTPJ0007

Stand for engines

foldable, lifting capacity: 680 kg IC index

0XPTPJ0009

Crane stabiliser

lifting capacity: 600 kg IC index

OMA 587G

with stabilisers, lifting capacity: 340 kg

0XPTPJ0008

IC index

0XPTPJ0010

Stand for engines

with stabilisers, lifting capacity: 567 kg IC index

0XPTPJ0011

Gearbox jacks 0XPTPK0006

0XOM46030

OMA 603

IC index 0XOM46030 OMA 603 0XPTPK007E 0XPTPK0008 OMA 604 0XOM46060 0XOM46100 0XPTPK0009 OMA 606 OMA 612 OMA 609 Positioning grip: OMA 606.1 0XPTPK0006

0XPTPK0007 0XPTPK0008

Lifting capacity 300 kg 300 kg 500 kg 500 kg 500 kg 600 kg 1000 kg 1000 kg 1000 kg 4000 kg 10 000 kg

OMA 604

0XOM46060

0XOM46100

Type Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

Operating range 1280–2105 mm 1120–1970 mm 1135–1950 mm 875–1855 mm 1140–1990 mm 1267–2097 mm 1316–2146 mm 880–1915 mm 1140–1990 mm 880–1900 mm 1250–2100 mm

----

0XPTPK0009

OMA 606

OMA 612

Positioning grip ---OMA 606.1 0XPTPK0006 included OMA 606.1 ------included OMA 606.1 -------

OMA 609

OMA 606.1

Manufacturer OMEGA OMA PROFITOOL PROFITOOL OMA OMEGA OMEGA PROFITOOL OMA OMA OMA OMA PROFITOOL

Beam

used to lift/suspend engines, lifting capacity: 500 kg, support adjustment: 1000–1490 mm, two handles IC index

0XOM90165

177

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

48004

48005

48001

48002

48003

Quick-lift jacks IC index 48004 48005 48001 48002 48003

Lifting capacity 1.35 t 2t 2t 2t 3t

0XPTPH0014

0XPTPH0015

0XPTPH0050

Lifting height 80–375 mm 120–375 mm 85–490 mm 85–490 mm 130–490 mm 0XPTPH0051

0XPTPH0052

ADAPTER 0XPTPH0059

0XPTPH0018 0XPTPH0021

0XPTPH0023

0XPTPH0022

Single-point “quick-lift” jack IC index 0XPTPH0012 0XPTPH0014 0XPTPH0015 0XPTPH0018 0XPTPH0021 0XPTPH0022 0XPTPH0023 0XPTPH0024-2 0XPTPH0050 0XPTPH0051 0XPTPH0052

0XPTPH0024-2

Type of jack drive-through –“quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack

Jacks

Lifting capacity 2.25 t 2.5 t 3t 1.5 t 2t 2t 3t 3t 2t 1.5 t 2.5 t

0XOM29035

IC index 0XOM29035 0XOM29037 0XOM29025

0XPTPH0016

Lifting capacity 2t 12 t 32 t 5t 10 t 20 t 50 t

178

0XPTPH0011

4800102

Lifting capacity 2t 4t 6t 8t 12 t 20 t

Dimensions 700x344x180 mm 640x342x174 mm 685x346x180 mm 660x294x170 mm 1006x365x136 mm 1006x365x136 mm 1150x350x180 mm 760x345x170 mm 670x310x163 mm 590x290x175 mm 650x292x170 mm

Minimum height 158 mm 180 mm 197 mm 205 mm 215 mm 244 mm

Extra info low profile pedal aluminium double wheels, ‘O’ handle ‘T’ handle ‘T’ handle low profile, aluminium low profile, aluminium/steel aluminium / steel

0XOM29025

Lifting capacity 3.2 t 3.2 t 2.25 t

Minimum height 181 mm 230 mm 285 mm 216 mm 182 mm 242 mm 300 mm

Bottle jacks IC index 4800102 4800104 4800106 4800108 4800112 4800120

Weight 36 kg 35 kg 38 kg 20 kg 42 kg 42 kg 55 kg 43.3 kg 23 kg 15.6 kg 28.2 kg

0XOM29037

Type of jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack drive-through – “quick-lift”jack

Bottle jacks IC index 0XPTPH0010 0XPTPH0011 0XPTPH0016 0XPTPH0017 0XPTPH0029 0XPTPH0048 0XPTPH0049

Lifting height 145–520 mm 85–455 mm 145–500 mm 85–445 mm 76–510 mm 76–510 mm 140–525 mm 100–428 mm 90–440 mm 90–358 mm 100–460 mm

0XPTPH0010

Lifting height 116 mm 155 mm 180 mm 127 mm 193 mm 150 mm 180 mm

4800104

Lifting height 90 mm 110 mm 125 mm 125 mm 125 mm 145 mm

Lifting height 145–504 mm 140–558 mm 63–437 mm

0XPTPH0017

0XPTPH0029

Extra height adjustment 48 mm 80 mm ---70 mm ---60 mm ----

4800106

4800108

Extra height adjustment 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm

0XPTPH0048

Total height 345 mm 465 mm 465 mm 413 mm 375 mm 452 mm 480 mm

0XPTPH0049

Weight 2.6 kg 7.4 kg 23 kg 4.5 kg 5.5 kg 11.2 kg 33 kg

4800112

4800120

Total height 308 mm 350 mm 382 mm 390 mm 400 mm 449 mm

Weight 2.5 kg 3.5 kg 4.6 kg 5.6 kg 7.5 kg 11.5 kg

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

0XPTPL00010 0XPTPL0007

0XPTPL0006

0XPTPL0008

0XPTPL0009

0XPTPL00011

0XPTPL0023

0XPTPL00012

Assembly supports for passenger cars IC index

Lifting capacity

Lifting height

Weight

Quantity

0XPTPL0006 0XPTPL0007 0XPTPL0008 0XPTPL0009 0XPTPL0010 0XPTPL0011 0XPTPL0012 0XPTPL0023

6t 2t 3t 2t 2t 3t 6t 0.75 t

376–576 mm 277–365 mm 285–400 mm 1250–2128 mm 278–420 mm 288–425 mm 395–605 mm 1360–2030 mm

4 kg 3 kg 4 kg 16.5 kg 5.5 kg 7.5 kg 13.5 kg 15 kg

kit/2 pcs. kit/2 pcs. kit/2 pcs. 1 pc kit/2 pcs. kit/2 pcs. kit/2 pcs. 1 pc

Special lift

Supports

for forklift trucks. Lifting capacity: 4/5 t IC index

0XPTPH0058

IC index

Type

Lifting capacity

Operating height

Quantity in the pack

0XOM32031 0XOM32121 0XOM32061 0XOM32039

low low low high

3t 12 t 6t 3t

290–433 mm 485–700 mm 365–565 mm 1300–2000 mm

2 2 2 1

0XPTPL0013 0XPTPL0014

Assembly supports for trucks

0XPTPL0015

0XPTPL0016

0XPTPL0017

0XPTPL0018

0XPTPL0019

0XPTPL0020

0XPTPL0021

0XPTPL0022

IC index

Lifting capacity

Lifting height

Weight

Quantity

0XPTPL0013 0XPTPL0014 0XPTPL0015 0XPTPL0016 0XPTPL0017 0XPTPL0018 0XPTPL0019 0XPTPL0020 0XPTPL0021 0XPTPL0022

12 t 12 t 10 t 10 t 15 t 15 t 20 t 20 t 25 t 25 t

710–1065 mm 456–710 mm 450–750 mm 650–1100 mm 450–750 mm 650–1100 mm 420–680 mm 665–1170 mm 415–640 mm 675–1050 mm

26.5 kg 19.5 kg 21.5 kg 26.5 kg 24.5 kg 32 kg 29 kg 39.5 kg 25.5 kg 35.5 kg

1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc

0XPTPH0044

0XPTPH0046

0XPTPH0045

0XPTPH0047

0XPTPH0040

0XPTPH0025

0XPTPH0042

Pneumatic-hydraulic jacks IC index

0XPTPH0041

0XPTPH0026

0XPTPH0040

0XPTPH0041

0XPTPH0042

0XPTPH0044

0XPTPH0045

0XPTPH0046

0XPTPH0047

0XPTPH0025

Lifting capacity (t):

25/10

40/20

50/25

40/20/10

60/40/20

60/40/22/11

80/50

20/40

15/30

Compressed air (Mpa):

0.6 ~ 0.8

0.6 ~ 1.0

0.8 ~ 1.2

0.6 ~ 1.0

0.8 ~ 1.0

Min height (mm):

Lifting height (mm):

0XPTPH0026

185

170

235

130

150

255

210

150

25 t: 91

40 t: 70

50 t: 117

40 t: 62.5

60 t: 57

60 t: 55

80 t: 111

40 t: 100

30 t: 74

10 t: 96

20 t: 62

25 t: 105

50 t: 93

20 t: 90

15 t: 68

75 + 45

20 t: 54.5

40 t: 49

40 t: 48

10 t: 58.5

20 t: 56

22 t: 53 11 t: 58

Adapters (mm): Weight (kg): Dimension (mm):

75 + 45

108

1480x350

1480x380

1480x350

1480x350x300

179

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

Presses

0XPTHA00010

0XPTHA0013

79375

79370

79350-1

IC index

Type

Pressure

Piston stroke

Operating range

Weight

Construction

Movable piston

Extra info

Equipment

79375

Hydraulic

20 t

190 mm

0–1000 mm

116 kg

Welded

YES

manual

prisms, manometer

79370

Hydraulic

20 t

190 mm

0–1000 mm

125 kg

Welded

YES

manual/foot

prisms, manometer

79330

Hydraulic-pneumatic

30 t

160 mm

60–940 mm

142 kg

Welded

YES

manual

prisms, manometer

79350-1

Hydraulic

50 t

200 mm

680–920 mm

285 kg

Welded

YES

manual/foot

prisms, manometer

Hydraulic oil

NEW

for special presses and jacks. High-quality universal hydraulic oil for presses and various types of specialised jacks such as quick-lift jacks, gearbox jacks, cranes and bottle jacks. Contains additives to increase the service life of hydraulic systems. IC index

Universal support

for a workshop press with 3 supporting points. Ideal for supporting the steering switch. IC index

for a workshop press. Ideal for supporting the steering switch. Diameters: 78–100 mm

SEA VS7036

IC index

SEA VS7037

EVERTOIL/JACK

Presses

0XOM60123

0XOM60253

OMA 651B

OMA 656B

OMA 658B

Pressure Piston stroke

Operating range

Weight

OMA 665

Construction

Movable piston

OMA 666

Equipment 1

OMA 667

IC index

Type

Equipment 2

Manufacturer

0XOM60123 0XOM60253 On request OMA 651B

Hydraulic

12 t

153.5 mm

0–924 mm

92 kg

Bolted

left-right

OMEGA

Hydraulic

25 t

153.5 mm

0–924 mm

92 kg

Bolted

left-right

OMEGA

Hydraulic

10 t

160 mm

0–1000 mm

100 kg

Welded

left-right

pins – option

pedal control – option

OMA

OMA 656B

Hydraulic

30 t

160 mm

0–1000 mm

230 kg

Welded

left-right

pins – option

pedal control – option

OMA

OMA 658B

Hydraulic

50 t

160 mm

0–1000 mm

350 kg

Welded

left-right

pins – option

pedal control – option

OMA

OMA 665

Electro-hydraulic

50 t

250 mm

65–1050 mm

430 kg

Welded

no / option

pins – option

extra table – option

OMA OMA

OMA 666

Electro-hydraulic

100 t

320 mm

240–1000 mm

980 kg

Welded

no / option

pins – option

extra table – option

OMA 667

Electro-hydraulic

150 t

400 mm

230–1020 mm

1680 kg

Welded

no / option

pins – option

extra table – option

OMA

OMA 654B

Hydraulic

20 t

160 mm

0–1000 mm

140 kg

Welded

left-right

pins – option

pedal control – option

OMA

Airpress jacks IC index

180

Lifting capacity

Max height

Min height

Dimensions L x W x H

Weight

72119

750 mm

195 mm

1050x355x250 mm

110 kg

72118

10 t

650 mm

215 mm

1370x380x233 mm

81 kg

72126

10 t

920 mm

235 mm

1250x380x310 mm

120 kg

72124

16 t

700 mm

205 mm

1492x403x300 mm

160 kg

HYDRAULIC AND HYDRAULIC-PNEUMATIC PRESSES

CP86150

CP86200

CP86500

CP86300

CP86100

CP86750

IC index

Type of press

Service

Pressure

Piston stroke

Operating range

Construction

Movable piston

Weight

CP86150

Hydraulic

Manual

15 t

160 mm

157–457 mm

Welded

None

75 kg

CP86200

Hydraulic

Manual

20 t

186 mm

185–1175 mm

Welded

None

105 kg

CP86300

Hydraulic

Manual

30 t

160 mm

151–1031 mm

Welded

167 kg

CP86500

Hydraulic

Manual/foot-operated

50 t

200 mm

68–1048 mm

Welded

CP86750

Hydraulicpneumatic Hydraulicpneumatic

Manual/foot-operated

75 t

250 mm

170–884 mm

Welded

Manual/foot-operated

100 t

300 mm

114–814 mm

Welded

left-right (range: 200 mm) left-right (range: 245 mm) left-right (range: 260 mm) left-right (range: 223545 mm)

CP86100

298 kg 498 kg 766 kg

HYDRAULIC AND PNEUMATIC LIFTS

CP85030

CP85050

CP85080

CP85100

IC index

Lifting capacity (t)

Min height (mm)

Lifting height (mm)

Adapters

Weight

Dimension

CP85030

15/30

150

15 t: 139 mm, 30 t: 73 mm

45+75 mm

38 kg

1365x326x290 mm

CP85050

15/25/50

160

15 t: 192 mm, 25 t: 123 mm, 50 t: 62 mm

45+75 mm

60 kg

1430x555x282 mm

CP85080

50/80

230

50 t: 213 mm, 80 t: 111 mm

45+75 mm

103 kg

1610x520x340 mm

CP85100

33/60/100

215 mm

33 t: 275 mm, 60 t: 188 mm, 100 t 98 mm

45+75 mm

105 kg

1600x860x341 mm

PRESSES, SUPPORTS, JACKS, HOISTS, SANDBLASTERS, WINCHES

DRAGON WINCH, INDUSTRIAL series dedicated for use in workshops. DRAGON WINCH, INDUSTRIAL series Constructionally robust and durable 230-V winches. Lifting height: 12 m / 6 m Brake: automatic Limit switch IC index

DWI125/250

IC index

Emergency / safety switch Remote control (up / down) Single line pull force: 125 / 300 / 300 / 400 / 500 kg Double line pull force: 250 / 600 / 300 / 800 / 990 kg (sheave in the kit)

DWI300/600

IC index

DWI400/800

IC index

DWI500/990

Hand cart 0.5/1.0 t IC index

Tiltable mast IC index

IC index

DWIWE0,5T

Stationary sanding machine

industrial model, pedal control, adjustable pressure gauge, working space: 860x550x500 mm, dimensions: 960x600x1260 mm, air demand 450 l/min @ 7 bar. IC index

0XPTCD0003

IC index

STANDARD, dimensions: 860x560x1390 mm, air demand: 450 l/min @ 7 bar, operating space: 600x840x630 mm

capacity: 75 l, weight: 21 kg, operating pressure: 4â&#x20AC;&#x201C;6 bar/60~125 Psi, hose length: 2.5 m

0XPTWC0014

2.5

300

330 N

0XPTWC0015

1.5

2.5

360

370 N

0XPTWC0016

2.5

380

330 N

12.4

0XPTWC0017

470

390 N

21.7

0XPTWC0018

600

420 N

0XPTWC0019

730

450 N

Lifting capacity (t)

Lifting height (m)

Body. Hook-to-hook distance â&#x20AC;&#x201C; min 9 (mm)

Load lifting force (max load capacity)

IC index 0XPTWC0023

Lifting capacity 1.5 t

0XPTWC0024 0XPTWC0025

Weight (net/gross) 10.5 / 11.2 kg

1.5 m

10.8 / 11.5 kg

1.5 m

18 / 18.7 kg

Platform trolley

IC index

lifting capacity: 150 kg, height: min 220 mm, max 700 mm. IC index

72178

lifting capacity: 300 kg, height: min 270 mm, max 760 mm

0XPTTP0002

Platform trolley

pallet version, load capacity: 2500 kg, fork length: 1150 mm, polyurethane castors, double castors on forks IC index

182

Weight (kg)

Lifting height 1.5 m

pallet version, load capacity: 2500 kg, fork length: 1150 mm, polyurethane castors, double castors on forks.

Platform trolley

0XPTCD0005

No. of fastening chains 1

IC index

Platform trolley IC index

0XPTCD0009

Mobile sanding machine

0XPTCD0004

IC index

Chain hoists

DWIWR1T

industrial model, pedal control, adjustable jet, dust trapping collector, working space: 1200x600x570; dimensions: 1300x900x1700 mm

DWIWE1,0T

Stationary sanding machine IC index

IC index

Stationary sanding machine

Electric trolley 0.5/1.0 t

DWIMASZT

DWIWR0,5T

0XPTTP0003

0XPTTP0001

Pallet-mast trolley

high euro-pallet lifting, load capacity: 1000 kg, lifting height: 3 m, fork length: 90 cm, fork width: 55 cm IC index

0XPTTP0004

9.4

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Hydro Power

Professional pressure washers made of high-quality stainless steel with a wide range of applications. They are very well-suited for regenerating turbochargers and cleaning heavily soiled parts made of steel, cast-iron, aluminium and other alloys. Washing is conducted in a closed cycle with the use of the MRS Cleaner Ultra Active wash fluid heated to 45 °C. The MRS Cleaner Ultra Active fluid comes out of gun nozzles at a pressure of up to 140 bar, therefore it cleans hard-to-reach areas and very dirty parts, as a result of eliminating carbon deposits, greases or oils. Both temperature and fluid increase cleaning performance. The washers are equipped with two filters. The feet can be adjusted up to 20 cm. Their covers are equipped with pneumatic cylinders which increase the safety and quality of operation. The washer is also equipped with a through brush / gun with compressed air, which is an extra advantage. There are cleaning nozzles on the glass to enable inspection of the washer’s operation. – The thermally insulated tank effectively prevents the heated fluid inside from being cooled down too fast. – Glass-cleaning nozzles – Height adjustment feet

TECHNICAL DATA

HYDRO POWER 800

Overall width: Overall depth: Min/max height (closed position): Min/max height (open position): Working width: Working depth: Working height: Net weight: Min/max working fluid capacity: Temperature control: Lance performance: Pressure: Heater power: Engine power: Supply voltage: Security level:

HYDRO POWER 1200

1010 mm 800 mm 1720/1920 mm 2380/2580 mm 700 mm 700 mm 620 mm 170 kg 75–95 l

1410 mm 800 mm 1720/1920 mm 2380/2580 mm 1100 mm 700 mm 620 mm 200 kg 120–150 l

0–50oC up to 12 l/min 140 Bar 4 kW 3 kW/1450 rev/min 3~400 V IP-54

0–50oC up to 12 l/min 140 Bar 6 kW 3 kW/1450 rev/min 3~400 V IP-54

Manual washing with a through brush:

Up to 5 l/min

Compressed air gun:

max 8 atm

High-pressure pump: Switch: Oil separator: Extra option (not included in standard price): Index

interpump foot-operated disk oil separator top spray lance

EVERT HYDRO POWER 800

EVERT HYDRO POWER 1200

belt oil separator

MRS-WASH Technical data

Mrs–Wash 800

spray arm

Mrs–Wash 1000

Mrs–Wash 1200

Basket diameter Working height Basket load capacity Work time programming

800 mm 500 mm 300 kg 0–99 min

1000 mm 500 mm 300 kg 0–99 min

1200 mm 500 mm 300 kg 0–99 min

Washing temperature Heater power Tank volume (l) Spray performance Spray working pressure Overall width Overall depth Total open/closed height Power supply

60oC 9 kW 200 l 200 l/min 4.5 bar 1300 mm 1300 mm 1200 mm/2500 mm 3~400 V

60oC 9 – 12 kW 300 l 200 l/min 4.5 bar 1500 mm 1500 mm 1200 mm/2500 mm 3~400 V

60oC 12 kW 400 l 200 l/min 4.5 bar 1700 mm 1700 mm 1200 mm/2500 mm 3~400 V

Extra option (not included in standard price):

belt oil separator adjustable spray arm

Index

EVERTMRS-WASH800

EVERTMRS-WASH1000

EVERTMRS-WASH1200

183

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Type

EVERTMSTWAN500

Load capacity:

50 kg

Bath volume Working area:

Load capacity:

500 kg

Barrel volume:

60 l

Barrel volume:

60 and 200 l

490x390 mm

Working area:

780x575 mm

Working area:

1175x775 mm

900 mm

Working height:

500x400x1000 mm

WxTxH

20 kg

Weight

Weight Power supply:

Load capacity:

EVERTMST1200 / EVERTMST1200K (covered)

Type

20 l

Working height: WxTxH

EVERTMST800/ EVERTMST800K 500 kg

Type

230 V/50 Hz

800 mm

Power supply:

Working height:

1200x580x1200 mm

WxTxH

50 kg

Weight

230 V/50 Hz

800 mm 1200x780x1200 mm 80 kg

Power supply:

230 V/50 Hz

CLEANER ULTRA ACTIVE

Concentrate / Fluid for industrial, automatic, basket washers (5 l) IC index

Type

EVERTMST2000

Load capacity:

1000 kg

Washing fluid barrel volume

200 and 60 l

Working top surface

1995x980 mm

Working height:

Type

EVERTMOBIL1200

Load capacity:

300 kg

Washing fluid barrel volume Working top surface Working height:

60 l 500x1150 mm 210 mm

800 mm

Overall width:

1200 mm

Overall width:

2000 mm

Overall depth:

780 mm

Overall depth:

1000 mm

Overall height:

260 mm

Overall height:

1200 mm

Weight:

Weight: Power supply:

150 kg

EVERTCLEANER ULTRA ACTIVE

42 kg

Power supply:

230 V/50 Hz

Industrial odourless demulsifying degreasing solvent-based cleaner, for use in closed circuit hand washers. - Highly effective mixture of hydrocarbons - Versatility of usage - Excellent washing effect - Very low content of aromatic compounds - Subtle smell - Good anticorrosive properties - Low solubility in water - Quick separation in oil and gasoline separators - Does not contain corrosive and caustic substances - Labels and safety data sheets (SDS) are available in 15 20 L Inter Cars languages

IC index

184

60 L IC index

EVERTCLEAN MULTI PRO 60L 205 L

EVERTCLEAN MULTI PRO 20L

IC index

EVERTCLEAN MULTI PRO 205L

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Mobile washer for plastic parts 20 l tank, 230 V supply, dimensions: 750x527x231 mm IC index

0XWS3015

Mobile washer for parts based on a 65-l tank. bath volume: 75 l IC index

0XPTCD0006

Electric, stationary washers for parts weight: 6.5 kg, volume: 16 l dimensions: 470x360x250 mm IC index

0XPTCD0007

Stationary washer for parts weight: 45 kg, volume: 150 l IC index

0XPTCD0008

Washer for parts

with a deep tank, volume: 136 l, 230 V IC index

SEA SM40D

Stationary washer for parts

50 l volume, electric engine for fluid: 230 V, dimensions: 260x540x810 mm IC index

SEA SM19

Washer for parts 50 l. 230 V. washer dimensions (WxDxG): 898 x 810 x 540 mm, weight: 32 kg IC index

SEA SM28

Washing and greasing fluid 25 l (for workshop washers) IC index

SEA AK2501

Washer brush IC index

SEA SM201

Adapter for workshop washers enables using a brush in brush-free washers IC index

SEA SM201/A

185

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Hot-water washer

The MH 3M series takes mid-range hot water high pressure washers to a new level, meeting the latest productivity demands in the market. The MH 3M is equipped with our semi industrial NA4 pump with 3 ceramic coated pistons and a high efficiency 4 pole motor. It offers ideal performance levels for general hot water cleaning and the efficient EcoPower Boiler.

Innovative compact hot water unit with unique vertical design, high performance and great reliability. The MH 2C is ideal for everyday, low frequency cleaning tasks in the automotive segment, for tradesmen or around small farms. MH 2C combines an innovative highly mobile design with great performance levels and ground breaking features from the larger MH lines.

Model: MH 3M-160/770 PA 400/3/50 EU

IC index

107146903

Model: MH 2C-145/600 230/1/50 EU

IC Index

Performance (l/h)

700

Pressure (bar/Mpa)

160/16

107145003

Performance (l/h)

600

Pressure (bar/Mpa)

145/14.5

Hot-water washer

MH 2C ensures low cost of cleaning with reduced running costs, low storage requirements due to the compact design, and yet a high level of reliability thanks to the many safety functions and professional materials used. It is an unbeatable addition to the hot water range. The vertical design of the MH 2C reduces machine footprint considerably, making storage and transport less problematic. The unit will fit easily into the corner of a workshop, a commercial vehicle or can even be hung up on the wall.

The MH 4M series takes mid-range hot water high pressure washers to a new level, meeting the latest productivity demands in the market. The MH 4M is equipped with our industrial NA5 pump with 3 ceramic pistons and a high efficiency 4 pole motor. And the flow activated control system improves user comfort and handling as well as overall machine reliability. The MH 4M is suited for all hot water slightly heavier cleaning applications up to 4-6 hours use per day and due to the improved fuel saving EcoPower boiler system it offers very high efficiency and quick cleaning.

Model: MH 2C-190/780 400/3/50 EU

IC Index

107145013

Model: MH 4M-180/860 L

IC Index

Performance (l/h)

780

Pressure (bar/Mpa)

190/19

107146916

Performance (l/h)

860

Pressure (bar/Mpa)

180/18

Hot-water washer

Cold-water washer

MH 1C is a compact and innovative hot water unit ideal for low intensity and infrequent cleaning applications around small garages or farms, car dealers or by tradesmen and craftsmen. The MH 1C combines a tough and robust design with the optimisation of floorspace. The cleaner offers many of the same features of the larger range products, ensuring high reliability, ease of use and storage and low running costs. The EcoPower boiler offers unmatched efficiency and reduced fuel consumption for a green and cost effective way to clean.

The MC 2C mobile units associates a high level of ergonomics with cleaning power. The MC 2C line comprises models designed for routine semi-professional use mainly by tradesmen, on small construction sites or for rentals. The mobile unit associates a high level of ergonomics with cleaning power. The compact cold water line that combines high performance level for increased cleaning efficiency, ergonomics and durability for superior everyday cleaning.

Model: MH 1C-110/600 230/1/50 EU

IC Index

107145000

Performance (l/h)

600

Pressure (bar/Mpa)

110/11

Model: MC 2C - MC 2C-120/520 T EU

IC Index

128470180

Performance (l/h)

520

Pressure (bar/Mpa)

120/12

Cold-water washer

Model: MC 2C - MC 2C-150/650 EU

IC Index

128470140

Model: MC 2C - MC 2C-140/610 XT EU

IC Index

128470135

Performance (l/h)

650

Performance (l/h)

610

Pressure (bar/Mpa)

150/15

Pressure (bar/Mpa)

140/14

Cold-water washer

Hot-water washer

The versatile MH 5M combines low running costs, high performance, ease of use, best in class mobility and great cleaning efficiency. The innovative design makes it easy to move over all types of surfaces. The flow-activated control system contributes to even more comfortable use of the machine and assures durability and reliability. The EcoPower boiler system offers > 92% efficiency for significantly reduced fuel consumption and lower running costs.

Model: MC 2C-150/650 XT EU

IC Index

186

128470138

Model: MH 5M-210/1100 FA 400/3/50 EU

IC Index

107146955

Performance (l/h)

650

Performance (l/h)

1100

Pressure (bar/Mpa)

150/15

Pressure (bar/Mpa)

210/21

WASHERS, VACUUM CLEANERS, WASHING STATIONS

HD and HDS high-pressure units HDS 7/16-4C Basic

HDS 6/14 C

High-pressure unit with new-generation water heating, compact class, distinguished by its excellent mobility and simplified operation. This device can be operated in the eco-efficiency mode, which effectively reduces fuel consumption. IC index

1.174-904.0

This new generation compact-class HDS is distinguished by its excellent mobility and simplified operation. This device can work in the eco-efficiency mode, which effectively reduces fuel consumption. IC index

Performance (l/h)

270-700

Pressure (bar/Mpa)

30-160

HDS 8/18-4C

1.174-900.0

IC index

Performance (l/h)

300-800

Pressure (bar/Mpa)

30-180

HDS 5/15 U

1.064-912.0

Performance (l/h)

500

Pressure (bar/Mpa)

150

HD 5/15 C

High-pressure unit with no water heating, compact class. Its small size and low weight make it possible to work wherever high mobility and flexibility are required. IC index

1.520-930.0

Performance (l/h)

500

Pressure (bar/Mpa)

150

HD 7/17 M

New HD middle class - universal, strong and durable. Automatic pressure reduction function and easy exploitation are an ideal solution for cleaning in automotive industry, car wash, industry, transportation or construction. IC index

1.151-930.0

Performance (l/h)

700

Pressure (bar/Mpa)

170/17

240-560

Pressure (bar/Mpa)

30-140 / 3-14

The medium class includes high-pressure units designed to eliminate particularly troublesome dirt and work in harsh environments.

High-pressure unit with water heating, upright-class, compact, vertical construction. Thanks to its special design, it is characterised by exceptional mobility. IC index

Performance (l/h)

HDS 8/18 -4M

High-pressure unit with newgeneration water heating, compact class, distinguished by its excellent mobility and simplified operation. This device can be operated in the eco-efficiency mode, which effectively reduces fuel consumption. IC index

1.169-900.0

1.077-908.0

Performance (l/h)

400-800

Pressure (bar/Mpa)

30-180/3-18

HD 5/12 C

High-pressure unit with no water heating, compact class. Its small size and low weight make it possible to work wherever high mobility and flexibility are required. IC index

1.520-900.0

Performance (l/h)

500

Pressure (bar/Mpa)

120

HD 6/15 M

1.150-930.0

Performance (l/h)

560

Pressure (bar/Mpa)

150/15

HD 7/16-4 M

1.524-955.0

Performance (l/h)

700

Pressure (bar/Mpa)

160/16

187

WASHERS, VACUUM CLEANERS, WASHING STATIONS

KĂ¤rcher professional cleaning agents RM 769 Stain-removing agent for any carpet and upholstery. Effectively removes oil, shoe polish, chewing gum, pen stains. IC index

6.295-490.0

RM 31 ASF 2,5 l

Alkaline cleaning agent, suitable for use with high-pressure cleaning equipment, in primary washing. Suitable for workshops and industrial plants. IC index

RM 821 ASF 20 l

Agent which provides your vehicle with long-lasting gloss and pearly effects. It leaves no stains even when blow-drying. IC index

Â 6.295-431.0

for HDS equipment to prevent limescale deposits in heating coils / pumps and avoid their corrosion. It eliminates the effects of giving too hard / too soft water. Packaging: 1 l. IC index

6.295-623.0

Concentrated agent, with a wide range of applications. It dissolves and removes persistent road impurities such as dust, oil, grease, insects, wood resins and mud.

6.295-433.0

The alkaline Foam Cleaner RM 838 is for contactless vehicle washing which effortlessly removes heavy oil and grease stains, insect residues and road dirt and is gentle on paintwork.

6.295-838.0

RM 760

Classic powder to clean textile linings and furniture upholstery in the spray and suction-off mode. IC index

6.291-388.0

Active cleaning concentrate for high-pressure washing, it is gentle on materials, removes heavy oil, grease and mineral stains. Used for washing vehicles, tarpaulins and engines.

6.295-556.0

CP 930

Active cleaning agent. It removes persistent oil and grease stains effortlessly. It accelerates drying and facilitates removing insect residues.

6.295-515.0

CP 940 20 l

Delicately alkaline shampoo with a pleasant lemon scent. It preserves surfaces and is easy to flush. For use in self-service car-wash systems. IC index

6.295-519.0

RM 770

Strong detergent for washing carpets and upholstery with its very powerful formula to remove dirt. It contains no surfactants. It dissolves even the most resistant oil, grease or nicotine stains. Makes cleaned surfaces much more resistant to dirt. IC index

188

6.295-687.0

RM 81 ASF

IC index

RM 838 20 l

IC index

Ready-to-use glass cleaning agent. It dries quickly and leaves no streaks. Also suitable for plastic surfaces (e.g. furniture)

IC index

RM 806 ASF

IC index

CA 40 R

IC index

RM 110 ASF

6.295-584.0

6.295-489.0

WASHERS, VACUUM CLEANERS, WASHING STATIONS

High-pressure cold-water washers High-pressure washer

STAHLMEISTER is intended for medium-intensity cleaning and washing works. The perfect solution for cleaning cars, caravans, garden furniture or terraces. Its vertical construction, pressure hose reel, detergent tank and turbo lance determine its functionality. Max 225 bar, 3000 W, 50 Hz/230 V, max water consumption: 6.8 l/min; detergent tank; turbo lance; brass pump. IC index

STM0054

Pneumatic sprinkler

tank volume: 30 l IC index

tank volume: 65 l

0XPTCD0001

IC index

0XPTCD0002

POLSONIC ultrasound washers

* Selected models with a 1.5 mm stainless-steel welded bath, 1.5 mm thick, with a hinged cover, a digital controller as an option. Fluid for washing parts is available in 2-litre containers (IC Index: SONIC CZYSCIWO). Every washer is equipped with a cover in the standard version and a basket.

Index

Bath, internal dimensions L x W x D (mm)

Volume (l)

Frequency (kHz)

Ultrasonic peak power in the period (W)

Heating (30–80°C)

Timing (1–30 min)

Drain valve

Weight (kg)

External dimensions W x D x H (mm)

Housing made of stainless steel

Sonic 2

150x135x100

1.6

2 x 100

Yes

2.8

175x165x220

Yes

Sonic 3

240x135x100

2.8

2 x160

Yes

3.7

265x165x225

Yes

Sonic 3S

240x135x100

2.8

2 x 160

Yes

3.9

265x165x235

Yes

Sonic 6

295x145x150

5.7

2 x 200

Yes

5.0

325x180x285

Yes

Sonic 10

295x235x150

9.5

2 x 400

Yes

7.7

325 x 265 x 280

Yes

Sonic 14*

320x220x200

2 x 400

Yes

17.1

405x385x300

Yes

Sonic 22*

300x400x250

2 x 700

Yes

26.5

385x575x360

Yes

Sonic 33*

550x300x250

2 x 1000

Yes

32.5

635x465x355

Yes

Sonic 36*

300x400x400

2 x 800

Yes

29.6

385x575x500

Yes

4 MAX UNIVERSAL WASHING AGENT FOR USE IN HIGH-PRESSURE HOSES Specialised, universal concentrated 4MAX cleaning agent for use in all high-pressure cleaning and washing equipment. Thanks to its multi-component formula, it guarantees a wide spectrum of applications – it removes oils, greases and mineral impurities off all waterresistant surfaces such as glaze, terracotta, concrete surfaces, stone and wood terraces, plastic furniture, car paints and varnishes, etc.

Perfect for use in your workshop, car, home, garden, etc. It is biodegradable. It contains no phosphates or other dangerous ingredients. Additionally, it has a pleasant floral fruity aroma. The product is intended for universal use in high-pressure washers, for cleaning vehicles, in the food industry, agriculture, etc.

5L index: 1305-01-0036E

NEW

189

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Vacuum cleaner for dry and wet use

Airflow rate (l/min): 3600 Under-pressure (mbar/kPA): 210/21 Tank capacity (max l): 20

Airflow rate (l/min): 3600 Under-pressure (mbar/kPA): 210/21 Tank capacity (max l): 20 Auto on/off socket for power tools

Model: Aero 21-01 PC

IC index

107406600

Aero 21-21 PC

IC index

107406601

Vacuum cleaner for dry and wet use

Airflow rate (l/min): 3600 Under-pressure (mbar/kPA): 210/21 Tank capacity (max l): 25 Auto on/off socket for power tools

Airflow rate (l/min): 3600 Under-pressure (mbar/kPA): 210/21 Tank capacity (max l): 30 Auto on/off socket for power tools Metal tank

Model: Aero 26–21 PC

IC index

107406606

IC index

Vacuum cleaner for dry and wet use ATTIX 30–21 PC 230V 50HZ EU Airflow rate (l/min): 3700 Under-pressure (mbar/kPA): 250/25 Tank capacity (max l): 30 Anti-static system

IC index

Model: Aero 31–21 PC INOX

107406607

Vacuum cleaner for dry and wet use

Model: ATTIX 33–2L IC 220–240V 50/60HZ EU Airflow rate (l/min): 4500 Under-pressure (mbar/kPA): 250/25 Tank capacity (max l): 30 Filter cleaning system: InfiniClean Approved for the collection of hazardous dusts (L-class)

107407544

IC index

107412103

Vacuum cleaner for dry and wet use

Airflow rate (l/min): 3700 Under-pressure (mbar/kPA): 250/25 Tank capacity (max l): 47 Filter cleaning system: Push&Clean Main filter type: PET

Airflow rate (l/min): 4500 Under-pressure (mbar/kPA): 250/25 Tank capacity (max l): 42 Filter cleaning system: InfiniClean Approved for the collection of hazardous dusts (L-class)

Model: ATTIX 50-01 PC 230V 50HZ EU

IC index

190

302003411

Model: ATTIX 44–2L IC 220–240V 50/60HZ EU

IC index

107412106

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Wet & dry vacuum cleaner

NT 27/1

Model: MAXXI II 35 WD 220-240V/50-60 EU

MAXXI II 35 offers easy and efficient wet & dry use without filter changing. The unique dual filter allows the machine to be used for both wet and dry applications without the need to change filters. Thanks to MulitFit connection the MAXXI II tools are compatible with all ATTIX accessories.

IC index

107405165

IC index

Vacuum cleaner with a water collection module. The unit has a robust and reliable construction. Designed to work efficiently in heavy-duty and harsh conditions. It has a filter cleaning TACT system, electro tools socket and 40L tank.

1.148-201.0

IC index

NT 50/1 Tact Te L

1.148-311.0

NT 65/2 Tact2

Vacuum cleaner with the TACT² system and water collection module. It meets the highest European safety standards. IC index

1.667-286.0

1.148-411.0

Scrubbing-collecting automatic unit

NEW

Model: SCRUBTEC 130 E EU Performance (m2/hour): 630/310 Scrubbing width (mm): 310 Brush speed (rev/min) 2100 Voltage (V): 230/50

IC index

1.428-500.0

NT 40/1 Tact Te L

NT 30/1 Tact L

IC index

Versatile,compact vacuum cleaner with a water collection module and a robust design.Perfectly suitable for small surfaces requiring regular cleaning.

Scrubbing-collecting automatic unit Model: SCRUBTEC 334 C

Performance (m2/hour): 1360/680 Suction nozzle width (mm): 340 Brush speed (rev/min) 1000 Voltage (V): 36

IC index

9087382020

107408150

Scrubbing-collecting automatic unit

Performance (m2/hour): 1480/890 Scrubbing width (mm): 370 Brush speed (rev/min) 120 Voltage (V): 12

The SCRUBTEC 344 is the robust, productive, and easy-to-use walk-behind scrubber dryer you can always count on. Ideal for effective floor cleaning in, e.g. general stores, specialty stores, car dealer showrooms, repair shops and garages, gas station shops, and similar places. Independent, batterypowered unit.

Model: SCRUBTEC 337.2

IC index

9087343020

BR 40/10 C Adv scrubber

Professional heavy-duty handoperated scrubber dryer makes light work of dirty floors. IC index

1.783-311.0

Model: SCRUBBER SCRUBTEC 344 B COMBI

IC index

9087396020

BD 43/25 C Bp scrubber

Battery-powered. It is a perfect solution for workshops and car showrooms, shops and petrol stations. Its steering wheel makes precise manoeuvring much easier. The ready-to-use kit includes: 1 515 400 BD 43/25 C Bp 9 537 084 0 – 2 x battery 9 537 139 0 – rectifier 9 537 182 0 – connector 4 777 407 0 – strip IC index

9.537-699.0

191

WASHERS, VACUUM CLEANERS, WASHING STATIONS The technical specification of the product, its standard equipment, accessories and final price must be agreed upon under individual ordering. All the photos are provided for illustration only. We reserve the right to change our prices. Ask your technical consultant for more details..

1-station self-service car-wash system SH AUTO 5M-100/500 DSS

3-station modular car-wash system Compact M To be built up and possibly extended with extra modules, no assembly and installation.

The SH AUTO 5M is a range of stationary self service wash units equipped with innovative frequency modulated motor technology. Ideal solutions for equipping service stations or car dealerships with a self service wash site with quick payback on investment. IC index

309003027

107370882

2-station modular self-service car-wash system Compact E â&#x20AC;&#x201C; Diesel / LPG no additional structure required, no building permit) IC index

IC index

309002650

The SC UNO range offer models from 5M and 5M L, to 6P and 7P. Industrial stationary cold high pressure water washers with new innovative steps to meet the specific cleaning needs and designed to meet heavy-duty cleaning challenges with convincing performances. IC index

SH SOLAR 8P-180/2000 D 400/3/50 EU

Diesel powered stationary heating for maximum efficiency in the automotive, industrial and shipping sectors where the cleaning is always made at one particular site indoors - or where the machine should be kept in a technical room away from the cleaning site with pressurized water transported by pipeline or long hose. IC index

107340510

SC DELTA 6P 160/4500-3 EU

The SC DELTA is a multi-pump, multipressure system encompassing 3, 4 or 6 pumps - and allowing up to 12 people to work at any time. A stationary cold water unit for the heaviest cleaning applications in industry, slaughter houses, food & beverage industry, ship & off shore industry and large truck wash areas IC index

107342000

107370080

Carport for self-service car-wash system (washing stations: 2+0) We offer carports for every type of car-wash system. Configuration to be provided on individual request IC index

NEW

SC UNO 5M- 200/1050 L 400/3/50 EU

Self-service vacuum cleaner for dry works* SB-STATION and SB-TANDEM, coin-operated SB-TANDEM IC index

301000006

SB-STATION

65482

IC index

65481

* You can order any colour of the vacuum cleaner.

Car-wash system for TIR vehicles, buses, trucks

Portal car-wash system for passenger cars

Simplicity. Performance. Results. These automated systems have minimum maintenance requirements and require no control and supervision. More than 7,000 cars can be serviced by our car-wash systems for trucks every month. Contact us to select a technology which will be most suitable for your investment.

We offer customised solutions which combine the best brush and touchless cleaning technologies. We build our car-wash systems taking into consideration special chemical formulas which guarantee excellent final results.

IC index

192

309200001

IC index

107371002 The final price is determined upon individual configuration.

WASHERS, VACUUM CLEANERS, WASHING STATIONS

1-station self-service car-wash system Oil-fed SB-Wash 5/10

Self-service vacuum cleaner

* optional

High performance and suction power. These vacuum cleaners – equipped with their automatic hose retracting mechanism – guarantee the comfort and safety of use.

with the water softening and osmosis production module* (transport, assembly, training included in the price) Compact, stationary token- or coin-operated unit. Ideal for the commercial washing of a small number of cars or your own vehicle fleet.

SB Sauger – MONO or DUO, coin- or token-operated in a painted or stainless-steel housing.

CB3 automated portal car-wash system for passenger cars

TB 42 portal car-wash system for commercial vehicles

Mobile single-brush car-wash system for cleaning small fleets (RBS) with their washing height at 4.20

Kärcher care equipment

This PREMIUM PLUS series is characterised by flexibility, safety and low operating costs. Ideal solutions for petrol stations, car showrooms and washing centres. Many configuration options.

Professional series – the extremely robust and durable construction of their portal guarantees a long service life as well as the safety of washed vehicles. No lubricants required and guaranteed low operating costs.

This is an excellent solution to extend your offer for customers. Low capital expenditure, extra increased turnover. Quick installation with little space required. Intended to wash rugs / mats. Fragrance tower Compressor Compressor + water

Extremely mobile solution for both outdoor and indoor use. High mobility and low operating costs are just some of the advantages.

Kärcher Yello SB MB/SB MU self-service car-wash systems from 2 to 8 washing stations Characterised by its unique and flexible design, this car-wash system can be optimally adapted to any conditions. Thanks to this, your customers are provided with solutions which meet their expectations. High-quality workmanship, intuitive and simple operation, safety and low operating costs are among the the most significant advantages of this Kärcher self-service car-wash system.

The unit price includes: technical and construction consultancy, transport, assembly, commissioning, training, documentation. At the customer’s request, it is possible to provide these services ”all in one”.

193

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Self-service steam machine dedicated for Self-service car-wash systems For Cars, Petrol Stations and Workshops

These units are intended for the self-cleaning of car upholstery, cleaning and disinfecting of ventilation ducts and all vehicle interiors by means of the steam method. They also work well in removing dirt off rims or car bodies, which are not coped with by water car-wash systems. These units were designed for petrol stations, small workshops and self-service car-wash systems to enable expanding the range of offered services and attract new customers. They are equipped with their payment acceptance system (coins or tokens), are ergonomic and ecological. We offer several models with various features.

POLISH PRODUCT

STEAM SAP 3 230/400 V 8 bar self-service automatic machine – 1 steam hose – 3 programs: Steam + Saturated steam + Steam detergent

STEAM SAP 2 230/400 V 8 bar self-service automatic machine – 1 washing hose – 2 programs: Steam vacuum cleaner + Steam detergent vacuum cleaner IC index

IC index

0XPTMY0021

0XPTMY0023

The photo is provided for illustration only.

R PREMIUM 9 kW steam car-wash system

AGRO TRUCK BOOSTER IC index

2 stations, ball valve, steam + saturated steam, steam pressure control, 9 bar, electric power supply 400 V/9 kW. application: intended to wash vehicles

107370889

IC index

0XPTMY0014

ACCESSORIES

Beater

WAP tokens

50 pcs. in the pack IC index

covered with fire-resistant zinc

309000281

IC index

Basket-beater kit

Self-service Evert Slim Line compressor

(acid-proof steel) IC index

10 l

IC index

194

Stand-alone self-service wheel pumping system in stainless steel housing

31372202

Descaler 309003100

31372201

IC index

Active foam 20 l

IC index

309003200

EVERT89FRP

Hydro wax 20 l

IC index

309003300

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Professional steam unit

POLISH PRODUCT

Model: JMR PREMIUM 9KW

2-station unit for commercial / industrial applications with a pressure level of 9 bar. Made of galvanised-steel powder-coated with a continuous boiler filling and an integral vacuum system. The unit is equipped with a complete set of tools and accessories. High-temperature steam penetrates deep into cleaned surfaces, disinfects them and kills microorganisms in a variety of commercial environments. First steam washing hose + detergent + suction, length: 4.5 m. Second steam washing hose + wet steam, length: 8 m.

IC index

Model: JMR PLUS

IC index

SPECIAL OFFER

Model: R PLUS

This machine is perfect for use as a mobile evaporator for cleaning cars, motorcycles, carpet laundry, upholstery. For commercial / industrial applications with a pressure at 6 bar. Made of galvanised-steel powdercoated with the continuous boiler filling and integral vacuum system.

POLISH PRODUCT

0XPTMY0025

JMR PREMIUM 9KW 7.5 l

Boiler power

9 kW (4.5+4.5 kW)

Water tank Detergent tank Working pressure Steam temperature Detergent application Steam pressure control Wet steam application No. of stations Extra accessories

6l 3v 10 bar 180°C yes yes yes 2 yes

Vacuum cleaner power Air flow Under-pressure Waste tank

1 kW 1869 (l/min) 2020 (mmH2O) 35 l

Power supply Power cable Weight Dimensions (L x W x H) Index:

3 Ph, 400 V 10 m 40+13 kg 60x47x48 cm 0XPTMY0024

IGOL-TEX is a very concentrated product with a pleasant and durable aroma. It can be used in all types of washing and cleaning equipment, including steam car-wash systems. Ideal for manual cleaning and stain removal. It effectively removes all types of dirt, ensuring clean surfaces with natural colouration. Low-foaming agent which requires no rinsing. Volume: 10 l.

For commercial / industrial applications with a pressure at 8–9 bar. Made of stainless-steel with the continuous boiler filling and integral vacuum system. The unit is equipped with a complete set of tools and accessories. High-temperature steam penetrates deep into cleaned surfaces, disinfects and kills microorganisms – for use in a variety of commercial and other environments.

0XPTMY0013

R PLUS 2.5 l 2.5 kW (2.5 kW) 5l no 6 bar 170°C no yes no 1 yes

JMR PERFEKT 5l 3.5 kW or 5 kW (2+1.5k W) or (2.5+2.5 kW) 5l 5l 8–9 bar 180°C yes yes yes 1 yes

1 kW 1869 (l/min) 2020 (mmH2O) l

1 kW 1869 (l/min) 2020 (mmH2O) 35 l

1 Ph, 230 V 50/60 Hz 5m 25 + 13 kg 31x35x36 cm 0XPTMY0025

1 Ph, 230 V 50/60 Hz or 3 Ph, 400 V 10 m 40+13 kg 50x45x60 cm 0XPTMY0013

Washing vacuum cleaner Model: TW 300 CAR

Power supply (V): 230 Air delivery (l/min): 2400 Under-pressure (mbar/kPA): 190/19 Tank capacity (max l): 75 Cleaning width (mm): 80 Water flow (l/min): 2

IC index

303000006

IGOLTEX

Puzzi 10/1

Professional spraying and suction equipment designed for cleaning carpets, rugs and textile upholstery. IC index

POLISH PRODUCT

Model: JMR PERFEKT

STEAM UNIT SPECIFICATION JMR PLUS 4.5 l 3.5 kW (2+1.5 kW) 6l 3l 8–9 bar 170°C yes yes yes 1 yes VACUUM CLEANER SPECIFICATION 1 kW 1869 (l/min) 2020 (mmH2O) 15 l GENERAL SPECIFICATION 1 Ph, 230 V 50/60 Hz 10 m 35+13 kg 60x40,5x48 cm 0XPTMY0019

Extremely concentrated product used to wash and clean vehicle interiors, carpets and upholstery

IC index

0XPTMY0019

Professional steam unit

IC index

Model Boiler volume

POLISH PRODUCT

For commercial / industrial applications with a pressure at 8–9 bar. Made of galvanised steel with the continuous boiler filling and integral vacuum system. The unit is equipped with a complete set of tools and accessories. High-temperature steam penetrates deep into cleaned surfaces, disinfects them and kills microorganisms in a variety of commercial environments.

0XPTMY0024

Professional steam unit

IC index

Professional steam unit

1.100-130.0

Puzzi 8/1 C

Professional spraying and suction equipment designed for cleaning carpets, carpets and textile upholstery. It is equipped with a new ergonomic handle. IC index

RM 760

Classic powder to clean textile linings and furniture upholstery in the spray and suction-off mode. IC index

6.291-388.0

1.100-225.0

195

WASHERS, VACUUM CLEANERS, WASHING STATIONS

Robust GAS 18 V-LI battery vacuum cleaner

Weight with the battery Tank volume (l) Max flow volume (turbine) Max under-pressure (turbine) Battery voltage Weight with no cable

No battery or charger included in the kit IC index

0 601 9C6 200

* Compact size, low weight and good balance * Soft-grip: its ergonomic shape simplifies handling and facilitates work * Two-stage speed control, optimal suction power depending on the application * Nozzles: a floor nozzle, extension tube, grout nozzle, grout nozzle holder for more versatility * Large waste container volume – 700 ml

* LED lighting: provides good visibility in dark and narrow nooks and crannies * Wristband ensures safe operation * Electronic Cell Protection System (ECP): protects the battery against overload, overheating and complete discharge * High efficiency and high suction power (vFiltr HEPA) helps to protect the user’s health * Long working time

Mobile GAS 35 L AFC vacuum cleaner for dry and wet use

Max nominal power (turbine) Weight Gross tank volume Net tank volume, water Vacuum cleaner dust protection class for dry and wet use Main filter dust protection class Max air flow (turbine) under-pressure (turbine)

Protection against electrostatic charging AUTOMATIC FILTER CLEANING SYSTEM IC index

0 601 9C3 200

* Certified ”L” dust protection class certified vacuum cleaner, compliant with the EU standard and providing an adequate level of user protection. * Socket for connecting power tools with its automatic on / off and delay features to improve the comfort of work * Integrated brackets for accessory, cable and hose.

Compact GHP 5-13 C high-pressure washer Copper induction engine with ceramic pistons Auto Stop mode IC index

0 600 910 000

* Efficiency: an optimal ratio of performance to weight allows for effective cleaning * Long service life: durable and reliable brass crankshaft pump with ceramic pistons * For a variety of tasks: pressure control provides optimum flexibility in operation

Extremely durable GHP 8-15 XD high-pressure washer Copper induction engine with ceramic pistons Auto Stop mode IC index

0 600 910 300

* Extremely high efficiency due to the combination of high pump performance and high pressure * For a variety of tasks: adjustable functions ensure optimum pressure for each and every task * Versatile: its self-suction feature allows for pumping water from a bucket or tank. * Long service life: durable and reliable brass crankshaft pump

196

1.4 kg 0.7 l 19.3 l/s 40 mbar 18 V 1.1 kg

1380 W 12.2 kg 35 l 19.2 l 18 V L M 74 l/s 254 mbar

* Convenient transport ensures the robust travel mechanism with non-marking wheels. * Smooth suction power adjustment on the tool adapter * Thanks to the anti-static function, electrostatic charge is prevented by electrically conductive hoses available as accessories * Automatic shut-off upon reaching the maximum volume when fluid is sucked

Nominal power Max pressure Working pressure Max inlet temperature Line length Hose length Material (hose) Fabric Weight (with no equipment) 17 kg Max pump performance Pumping system Pistons Engine type Lance

2.300 W 140 bar 130 bar 50 °C 5m 8m fabric 17 kg 520 l/h crankshaft ceramic (coated) inductive lance with smoothly adjustable spray jet (stainless steel)

* Versatile: its self-suction feature allows for pumping water from a bucket or tank. * Quiet operation: its Auto-Stop stops the pump and engine as soon as the button is released. * Dust extraction system plus cleaning: for more comfort at work * Easy access to the pump for easy maintenance.

Max pressure Nominal power Electricity Working pressure Max inlet temperature Line length Hose length Material (hose) Weight (with no equipment) Max pump performance Pumping system Pistons Engine type Lance

160 bar 4000 W 3 phase, 400 V 150 bar 50 °C 5m 15 m rubber with steel armouring 41 kg 800 l/h angular disc ceramic (coated) inductive lance with smoothly adjustable spray jet (stainless steel)

with ceramic pistons * Quiet operation: its Auto-Stop stops the pump and engine as soon as the button is released. * Tubeless steel construction * Hose reel (15 m) * Extremely robust wheels * Easy access to the pump for easy maintenance.

OIL TECHNIQUES

Pneumatic lubricator

NEW

equipped with a lubrication hose (225 mm), tank capacity: 500 cm3, suitable for 400-g lubricant cartridges IC index

IC index

NEW

with a clamp and cover for filling lubricators with NLGI 3 viscosity grease IC index

NEW

volume: 3 l, length of filling pipe: 240 mm IC index

0XPTJB0040

NEW

0XPTJB0041

Transferring syringe

NEW

volume: 350 cm3, length of suction/drainage pipe: 2 x 4”

0XPTJB0039

Transparent funnel with a lid

Lubricating quick-coupler IC index

volume: 1.7 l, length of filling pipe: 205 mm IC index

0XPTJB0036

max pressure: 8000 PSI (550 bar), 1/8” BSPT thread

0XPTJB0037

Transparent funnel with a lid

NEW

with a transparent housing, tank capacity: 500 cm3, suitable for 400-g lubricant cartridges

0XPTJB0035

Manual lubrication pump

Manual lubricator

IC index

NEW

0XPTJB0038

TOPTUL hand lubricator

NEW

capacity: 400, 300-mm flexible hose included in the kit IC index

JGAE0203

197

OIL TECHNIQUES

Manual pump

NEW

equipped with a transparent casing, for working fluids (coolants, solvents, enriching fluids), universal type for barrels (60–200 l), performance: 300 ml/stroke IC index

IC index

NEW

used to distribute PD, petrol and water, performance: 7 l/min, equipped with a suction pipe (375 mm), drainage hose (600 mm), power supply: 2 x LR20, for operation with containers (20 l)

NEW

0XPTBC0013

Meter for Ad Blue

NEW

capacity: 6–100 l/min, 1” threaded connector IC index

NEW

with a stainless steel nozzle for AD BLUE, flow: 60 l/min, 3/4” connector

198

NEW

0XPTBC0015

0XPTBC0014

Plastic gun IC index

Electric set

IC index

used to pump PD, kerosene and water, performance: 15/min, equipped with a filling hose (3 m), power supply: 12 V, 60-minute operational cycle IC index

0XPTBC0011

used to distribute PD, petrol and water, performance: 9 l/min, equipped with a suction pipe (460 mm), drainage hose (715 mm), power supply: 4 x AA, for operation with containers (20 l)

0XPTBC0012

Electric dip pump

NEW

used to distribute PD, AD BLUE, provided with a manual filler, power supply: 230 V, pump performance: 18.9 l/min, hose (2 m), for operation with barrels (205 l) and IBC containers (1000–1250 l)

0XPTBC0010

Electric pump

IC index

Electric set

0XPTBC0016

Automatic, plastic gun

with a stainless steel nozzle for AD BLUE, flow: 8–50 l/min, 3/4” connector IC index

0XPTBC0017

NEW

OIL TECHNIQUES

Suction unit: 30 l

Drainage unit: 90 l

manual emptying, a set of suction probes

pneumatic emptying IC index

0XPTJA0002

Suction unit

tank volume: 90 l, pneumatic emptying, includes a set of suction probes IC index

IC index

SPECIAL OFFER

0XPTJA0005

Drainage and suction unit, tank volume: 90 l pneumatic emptying, includes a set of suction probes IC index

0XPTJA0009

Drainage and suction unit with an 8-l control tank

Suction unit with 8-l control tank main tank capacity: 90 l, pneumatic emptying, includes a set of suction probes IC index

tank volume: 90 l, bath volume: 65 l, pneumatic emptying, includes a set of suction probes IC index

based on a 65-l tank, with a 14-l bathtub, on a pantograph IC index

RA46065

with a 50-l bath, on a pantograph IC index

RA46215

IC index:

Type

Dimension

0XPTJA0013

adapter

BMW

Length

0XPTJA0015

elastic

5 mm

700 mm

0XPTJA0016

rigid

5 mm

700 mm

0XPTJA0017

elastic

6 mm

700 mm

0XPTJA0018

rigid

6 mm

700 mm

0XPTJA0019

elastic

7 mm

1000 mm

0XPTJA0020

elastic

8 mm

700 mm

Expansion flange for drainage and drainage-suction units used to expand the diameter of a drainage sink up to 606 mm IC index

Drainage and suction unit based on a 115-l tank

0XPTJA0010

Oil suction probes

0XPTJA0011

Drainage and suction unit

0XPTJA0007

Drainage and suction unit with a pantograph

main tank capacity: 90 l, pneumatic emptying, includes a set of suction probes IC index

0XPTJA0003

0XPTJA0012

Drainage and suction unit based on an 80-l tank with an 8-l control tank, pressure emptied IC index

RA44085

199

OIL TECHNIQUES

Low-profile trolley

intended for barrels (200 l), low platform height above the ground (12.5 mm), foldable handle, max barrel diameter: 660 mm, max barrel weight: 545 kg IC index

0XPTJC0073

lifting height: 280 mm, max diameter: 600 mm, max length: 915 mm, lifting capacity: 250 kg, dimensions: 820x780x1250 mm

180–220 l, for lubrication and oil kits, 4 castors (2 swivel + 2 fixed)

0XPTJC0045

IC index

0XPTJC0044

0XPTJA0023

Trolley for barrels

180–220 l, for lubrication and oil kits, 4 castors (2 swivel + 2 with a reel holder)

IC index

volume: 65 l, roller spacing: 750–1200 mm

200

20–60 l, for lubrication and oil kits, 4 castors (2 swivel + 2 fixed)

0XPTJC0046

Drainage unit for barrels (200 l)

0XPTJA0021

Pit bath IC index

Trolley for barrels

IC index

Drainage unit for barrels (50 l) IC index

0XPTJC0072

0XPTOG0016

Trolley for barrels IC index

intended for barrels (200 l), it provides for easy loading, transport and convenient storage of barrels, high-quality finish, max barrel weight: 273 kg IC index

Transport trolley for barrels

IC index

Stand for barrels

0XPTJA0022

Floor bath volume: 65 l IC index

0XPTJA0024

NEW

OIL TECHNIQUES

Capturing pallet for 1 barrel capacity : 55 l, dimensions: 770x770x170 mm, orange colour IC index

SDP00055OR/1D

Capturing pallet for 4 barrels capacity : 240 l, dimensions: 1400x1400x270 mm, orange colour IC index

SDP00240OR/4D

Capturing pallet for 2 barrels capacity : 240 l, dimensions: 1400x760x420 mm, orange colour IC index

SDP00240OR/2D

Oil drainage bowl (bath) 30 l, low profile, dimensions: 850x600x125 mm IC index

0XAT2052

2.5 l

0XAT2053

Syringe-type dispenser

capacity: 200 ml, for filling gearboxes (equipped with a filler, syringe) IC index

capacity : 112 l, dimensions: 1400x760x420 mm, orange colour IC index

SEA VS404

SDW00112OR/2D

Working floor for 4 barrels capacity : 215 l, dimensions: 1410x1410x140 mm, orange colour IC index

SDW00215OR/4D

Capturing pallet

capacity : 1050 l, dimensions: 1890x1330x670 mm, orange colour, max load capacity: 2 t IC index

SDP01050OR

Container for used-up filters TIDYTOP, yellow colour (aesthetic guard for 205-l barrel) IC index

Oil drainage bowl IC index

Capturing pallet for 2 barrels

RTT00205YE

Oil drainage bowl 16 l

IC index

0XAT2058

Syringe-type dispenser

capacity: 1.5 l, for filling gearboxes (equipped with a filler, syringe) IC index

SEA VS405

201

OIL TECHNIQUES

Oil distribution kit

for barrels (50–60 l); pneumatic oil pump (performance at 3:1) gun with a flow meter, oil hose (4 m), trolley for barrel IC index

0XPTJC0001

for barrels (50–60 l); pneumatic oil pump (performance at 5:1) gun with a flow meter, oil hose (4 m), carriage for barrel

0XPTJC0032

for barrels (180–220 l); pneumatic oil pump (performance at 3:1) gun with a flow meter, oil hose (15 m) on the reel, carriage for barrel

0XPTJC0003

equipped with an electric pump: 9 l/min, max pressure: 25 bar, power supply: 230 V, provided with a gun with flow meter, suction hose (2 m), distribution hose (4 m), trolley IC index

0XPTJC0078

0XPTJC0033

Oil distribution kit

for barrels (180–220 l); pneumatic oil pump (performance at 5:1) gun with a flow meter, oil hose (15 m) on the reel, carriage for barrel

0XPTJC0034

Oil distribution kit for barrels (180–220 l)

equipped with an electric pump: 40 l/min, max pressure: 10 bar, power supply: 230 V, provided with a gun with flow meter, suction hose (2 m), distribution hose (4 m), trolley IC index

0XPTJC0079

Oil distribution kit universal type

Oil distribution kit

Pump performance at 1:1

equipped with a pneumatic oil pump, gun with flow meter, oil hose (4 m), adapters for the pump extension.

IC index

0XPTJC0038

Pump performance at 3:1 IC index

0XPTJC0039

Pump performance at 5:1 IC index

202

for barrels (180–220 l); pneumatic oil pump (performance at 5:1) gun with a flow meter, oil hose (4 m), carriage for barrel

IC index

Oil distribution kit for barrels (180–220 l)

0XPTJC0002

Oil distribution kit

IC index

Oil distribution kit

IC index

for barrels (180–220 l); pneumatic oil pump (performance at 3:1) gun with a flow meter, oil hose (4 m), trolley for barrel IC index

Oil distribution kit

IC index

Oil distribution kit

0XPTJC0040

wall-mounted, equipped with a pneumatic oil pump, gun with flow meter, oil hose (4 m)

IC index

0XPTJC0035

Pump performance at 3:1 IC index

0XPTJC0036

Pump performance at 5:1 IC index

0XPTJC0037

Drip bath IC index

0XZ02.0094

OIL TECHNIQUES

Oil gun

Oil distribution kit

engine type, equipped with an electronic flow meter, capacity: 1–60 l/min, 3/4” connector, accuracy: +/- 0.5%, manually-closed tip IC index

gearbox type, manual power-supplied – max pressure: 1.4 bar, tank 3 l with a set of adapters for gearboxes

0XPTJC0083

IC index

Oil gun

reinforced flow-meter housing, flexible automatically-closed tip

reinforced flow-meter housing, fixed manually-closed tip IC index

0XPTJC0065

IC index

Oil hose reel

0XPTJC0066

Lubricating tip kit

hose length: 15 m IC index

SEA VS70095

(7 pcs.)

0XPTJC0068

IC index

SEA AK4481

Pneumatic pump for barrels (180–220 l)

Pneumatic pump for barrels (50–60 l)

1:1 pump

1:1

IC index

0XPTJC0027

3:1 pump

IC index

0XPTJC0005

hose length: 15 m

0XPTJC0076

Pneumatic oil filler tank volume: 30 l IC index

0XPTJB0003

IC index

0XPTJC0026

3:1 pump

5:1 pump

Oil hose reel (1/2”) IC index

IC index

0XPTJC0031

IC index

5:1 pump

0XPTJC0004

IC index

0XPTJC0030

Manual oil filler tank volume: 16 l IC index

0XPTJB0001

Pneumatic oil filler tank volume: 65 l IC index

0XPTJB0004

203

OIL TECHNIQUES

Hand oil suction pump

Gearbox filler (syringe)

capacity: 500 cm3, length of suction/ drainage pipe: 300 mm

volume: 700 cm3, cable length 250 mm, equipped with a steel body, syringe-type oil dispenser for gearbox filling

0XPTJB0012

IC index

type: OR1000 volume: 1000 cm3, cable length 250 mm, equipped with a steel body, syringe-type oil dispenser for gearbox filling

(syringe type), volume: 500 cm3, length of suction/drainage pipe: 300 mm

0XPTJB0007

IC index

with a transparent casing (syringe type), capacity: 500 cm3, length of suction/ drainage pipe: 300 mm

tank: 400 g, lubrication line: 700 mm

SEA CPG18V

IC index

Manual pump IC index

with a transparent casing (syringe type), capacity: 1000 cm3, length of suction/ drainage pipe: 300 mm

0XPTJC0074

IC index

Manual oil pump

type: RPO 60/2000, universal pump used to distribute oil from barrels (60 and 200 l), equipped with a steel body, performance: 17 l/min, telescopic suction pipe: L 400–900 (steel)

0XPTJC0022

IC index

Oil can

provided with a fixed pipe (225 mm) IC index

Volume: 1l

0XPTJB0011

0XPTJB0008

IC index

Volume: 2l

204

0XPTJC0070

Oiler, volume: 500 ml

provided with a graduation scale, closing cap, elastic drainage tip

IC index

0XPTJB0025

Manual oil pump

universal type, for barrels (50–200 l) capacity: 14 l/min

0XPTJB0009

Volume: 5l

IC index

POLISH PRODUCT

NEW

0XPTJB0024

Gearbox filler

for gear-engine and diesel oils, crank-operated, for barrels (50–200 l), rotary type, 24 l/min

POLISH PRODUCT

0XPTJB0017

Gearbox filler

Electric lubricator (18 V) IC index

0XPTJB0016

Hand oil suction pump

Gearbox filler IC index

POLISH PRODUCT

0XPTJB0010

POLISH PRODUCT

NEW

OIL TECHNIQUES

Portable diesel (PD) distribution kit performance: 40 l/min 12V POWER SUPPLY IC index

Diesel (PD) gun

with an electronic flow-meter, capacity: 10–100 l/min, 1” connector, nozzle diameter: 15/16” IC index

0XPTON0001

0XPTON0003

24V POWER 24UPPLY IC index

0XPTON0002

Diesel (PD) distribution kit

SPECIAL OFFER

for barrels (180–220 l), equipped with an electric pump (35/70 l / min), power supply: 12/24 V, equipped with a flow-meter, suction hose (2 m), distribution hose (4 m), gun IC index

0XPTON0004

Diesel (PD) distribution kit

wall-mounted or for ’mauser’ tanks, equipped with an electric pump (120 l / min), power supply: 230 V, equipped with a flow-meter, suction hose (2 m), distribution hose (4 m), gun IC index

0XPTON0006

Diesel (PD) distribution kit

for barrels (180–220 l), equipped with an electric pump (72 l / min), power supply: 230 V, equipped with a flowmeter, suction hose (2 m), distribution hose (4 m), gun IC index

0XPTON0005

Diesel (PD) distribution kit

provided with a plastic case-box, suction hose (2 m) with filter, hose for distribution (4 m) + gun 12V power supply IC index

0XPTBC0007

24V power supply IC index

AD-BLUE oil distribution kit with an electronic flow-meter, 230 V power supply, suction hose (1.5 m), distribution hose (6 m) IC index

0XPTBC0004

0XPTBC0008

AD-BLUE oil distribution kit provided with no flow-meter, suction hose (1.5 m), distribution hose (6 m) 12V power supply IC index

0XPTBC0005

24V power supply IC index

Hand pump for working fluids (refrigerants, solvents, enriching fluids), universal type, for barrels (60–200 l), performance: 300 ml/stroke IC index

0XPTBC0001

Siphon pump for fluid distribution for sprayers IC index

0XPTBC0003

0XPTBC0006

Hand rotary pump

made of composite, intended for: AD Blue, aqueous refrigerants, acids, chemicals, all petrol derivatives, etc. IC index

0XPTBC0002

Membrane pump

manually-operated, flow rate: 16.6 l/min, it can be mounted on the wall or in a barrel, used to distribute water, oil, fuel IC index

0XPTJC0024

205

OIL TECHNIQUES

Grease distribution kit for barrels (20–30 kg)

Grease distribution kit for barrels (50–60 kg)

pneumatic grease pump (performance at 50:1), provided with a grease gun, lubrication hose (4 m), carriage for barrel IC index

0XPTJC0013

Grease distribution kit for barrels (180–220 kg) pneumatic grease pump (performance at 50:1), grease gun, grease hose (4 m), carriage for barrel IC index

0XPTJC0063

0XPTJC0017

IC index

hose length: 15 m

for 20–30 kg barrels

IC index

0XPTJC0015

0XPTJC0016

0XPTJC0069

for 180–220 kg barrels

IC index

0XPTJC0047

IC index

206

0XPTJB0023

Grease hose reel

for grease (performance at 50:1)

for 50–60 kg barrels

0XPTJC0064

tank volume: 20 kg

Pneumatic pump IC index

pneumatic grease pump (performance at 50:1), grease gun, grease hose (15 m) on the reel, barrel carriage

Pneumatic lubricator

with flexible and fixed tips IC index

Grease distribution kit for barrels (180–220 kg)

IC index

Tipped grease gun

0XPTJC0014

Description

0XPTJB0026

Lubricator tip, 4-jaw type, M10x1.0 thread

0XPTJB0027

Lubricator tip, conical type, M10x1.0 thread

0XPTJB0028

Fixed lubricator pipe, L = 250 mm, no tip, 2xM10x1.0 thread

0XPTJB0029

Lubricator line/hose, L = 400 mm, no tip, 2xM10x1.0 thread. max 250 bar

0XPTJB0030

Lubricator line/hose, L = 1000 mm, no tip, 2xM10x1.0 thread. max 250 bar

0XPTJB0031

Lubricator line/hose, L = 1500 mm, no tip, 2xM10x1.0 thread. max 250 bar

0XPTJB0032

Lubricator line/hose, L = 2000 mm, no tip, 2xM10x1.0 thread. max 250 bar

0XPTJB0033

Lubricator line/hose, L = 3000 mm, no tip, 2xM10x1.0 thread. max 250 bar

0XPTJB0034

Lubricator line/hose, L = 4000 mm, no tip, 2xM10x1.0 thread. max 250 bar

RA66740

Lubrication tip, 4-jaw type

RA66741

Lubrication tip, angular (90°) type

RA66742

Hexagonal grease tip, slip-in type

RA66743

Hexagonal grease tip, slip-in type

RA60450

Quick connector for central grease, 1/4" female type

RA60451

Quick connector for central grease, 1/4" male type

01-VZCS

Connector for filling VOGEL central lubrication systems

NEW

OIL TECHNIQUES

PROFITOOL foot-operated grease gun tank volume: 13 kg IC index

0XPTJB0020

Pneumatic lubricator tank volume: 13 kg IC index

0XPTJB0006

Manual lubricator tank volume: 16 kg IC index

0XPTJB0002

Foot-operated grease gun volume: 13 kg IC index

Pneumatic lubricator volume: 13 kg IC index

tank volume: 400 cm3 IC index

0XPTJB0005

intended for filling lubrication systems, suitable for barrels weighing 16/30 kg and diameter from 270 to 300 mm

tank volume: 400 cm3 suitable for 400-g lubricant cartridges IC index

0XPTJB0021

Pneumatic lubricator

tank volume: 400 cm3, suitable for 400-g lubricant cartridges IC index

0XPTJB0022

RA60410

Manual lubricator with an elastic cable

POLISH PRODUCT

type: SR300, performance: 0.8 g/stroke, max pressure: approx. 40 MPa, volume: 600 cm3 IC index

Manual lubricator

RA68213

Manual lubricator IC index

Manual lubricator

RA68113

0XPTJB0015

Manual lubricator for 400-g cartridges only type: SR300WR, equipped with a flexible cable, four-jaw tip, conical tip, rigid cable, pipe (L-250 mm), performance: 0.8 g/stroke IC index

0XPTJB0018

Manual lubricator for 400-g cartridges only, type: SR300W, flexible hose, four-jaw tip, performance: 0.8 g/stroke IC index

POLISH PRODUCT

NEW

0XPTJB0019

207

OIL TECHNIQUES

TANKS FOR DIESEL (PD)

POLISH PRODUCT

Available volumes: SWIMER TANK ECO-Line: 1500 l, 2500 l, 5000 l / SWIMER TANK: 2500 l, 3500 l, 5000 l, 7500 l, 10000 l

SWIMER TANK 2500 ECO-Line

SWIMER TANK 2500

Double-shell tank for storage and distribution of diesel with a volume of 2500 l Provided with a complete distribution system containing: vane pump (230 V max 56 l/min)

water separator

reinforced distribution hose (6 m)

automatic gun

automatic gun diameter: 1708 mm height: 1990 mm

Ask for accessories!

PPC-600 digital meter – the only unit with calibration only after pill dosage – memory for 10 fuelling entries – TOTAL counter – large 6-digit display (width: 140 mm, display height: 26 mm) – clear LED display IC index

SW-ELDPS2500/ON

SWIMER TANK 5000 ECO-Line

NEW

SW-FUDPS2500/ON

SWIMER TANK 5000

Double-shell tank for storage and distribution of diesel with a volume of 5000 l Provided with a complete distribution system containing: vane pump (230 V max 72 l/min)

water separator

reinforced distribution hose (6 m)

reinforced distribution hose (6 m) diameter: 2318 mm height: 2060 mm

automatic gun

Ask for accessories! PPC-600 digital meter – the only unit with calibration only after pill dosage – memory for 10 fuelling entries – TOTAL counter – large 6-digit display (width: 140 mm, display height: 26 mm) – LED display, easily readable when exposed to direct sunlight IC index

208

SW-ELDPS5000/ON

Ask for accessories!

Double-shell tank for storage and distribution of diesel with a volume of 5000 l Provided with a complete distribution system containing: vane pump (230 V max 72 l/min)

width: 1500 mm height: 1800 mm length: 2540 mm

diameter: 2360 mm height: 2100 mm length: 3100 mm

SW-FUDPS5000/ON

OIL TECHNIQUES POLISH

TANKS FOR AdBlue* PRODUCT

Available volumes: SWIMER BLUE TANK ECO-Line: 1500 l, 2500 l, 5000 l / SWIMER BLUE TANK: 2500 l, 3500 l, 5000 l, 7500 l, 10000 l

SWIMER BLUE TANK 2500 ECO-Line Double-shell tank for storage and distribution of AdBlue* with a volume of 2500 l Provided with a complete distribution system containing: dip pump (230 V max 40 l/min)

SWIMER BLUE TANK 5000 ECO-Line Double-shell tank for storage and distribution of AdBlue* with a volume of 5000 l Provided with a complete distribution system containing: dip pump (230 V max 40 l/min)

hand-operated gun

distribution hose (6 m)

IC index

diameter: 1708 mm height: 1990 mm

SW-ELDPS2500/AdBlue

Ask for accessories!

SWIMER BLUE TANK 5000

IC index

SW-ELDPS5000/AdBlue

LIPREMOS

Double-shell tank for storage and distribution of AdBlue* with a volume of 5000 l Provided with a complete distribution system containing: dip pump (230 V max 40 l/min)

Level measurement system for fluids with a dip pressure probe ADVANTAGES large 5-digit LED display power supply control in the pump constant monitoring of actual filling level indication of the maximum level notification of low level/block in the pump

hand-operated gun

NEW

diameter: 2318 mm height: 2060 mm

Ask for accessories!

POLISH PRODUCT

NEW

distribution hose (6 m)

LIPREMOS level measurement system

IC index

SW-FUDPS5000/AdBlue

diameter: 2360 mm height: 2100 mm length: 3100 mm

Ask for accessories!

IC index

SW-PLI-100B

te SYSTEM The most accuragory! in its cate

AdBlue is a registered trademark of the German Automobile Industry Association.

GUARANTEE OF SAFETY:

The first ever CRASH TEST of the filled tank.

Compliance with the PN-EN 13341:2005 +A1:2011 standard

/SWIMER

Golden Medal at the Kielce Trade Fairs in 2015 for the SWIMER TANK ECO-Line tanks in the category of environmentally safe products for small and mediumsized farms

209

WELDING

INDUCTOR 1.5 induction heater

This induction heater is used for the fast flameless heating of metals by means of induction. It heats M16 nuts up to 600˚C in approximately 15 seconds. It facilitates to easily remove any locked bolts and nuts. Recommended for mechanical repairs. Spirals for screw heating and a flexible cable are included in the kit. A wide range of additional straight/side coils is available. Power supply: 230 V. Maximum power: 1.5 kW. IC index

INDUCTOR 3 induction heater

NEW

Induction heater used for the fast flameless heating of metals by means of induction. It heats M12 nuts up to 800˚C in approximately 15 seconds. It facilitates the removal of any locked bolts and nuts. Recommended for mechanical repairs. Liquid-cooled. IC index

INDUCTOR3C

INDUCTOR1.5

SMART INDUCTOR 5000 TWISTER Extra coils for INDUCTOR 1.5

Index

Straight coil/15/220mm/M6

IND1.5-M6-S

Straight coil/19/220mm/M8

IND1.5-M8-S/19

Straight coil/20/220mm/M8

IND1.5-M8-S/20

Straight coil/23/220mm/M10

IND1.5-M10-S

Straight coil/26/220mm/M12

IND1.5-M12-S

Straight coil/32/220mm/M16

IND1.5-M16-S

Straight coil/38/220mm/M20

IND1.5-M20-S

Straight coil/45/220mm/M22

IND1.5-M22-S

Side coil/15/220mm/M6

IND1.5-M6-B

Side coil/19/220mm/M8

IND1.5-M8-B/19

Side coil/20/220mm/M8

IND1.5-M8-B/20

Side coil/23/220mm/M10

IND1.5-M10-B

Side coil/26/220mm/M12

IND1.5-M12-B

Side coil/32/220mm/M16

IND1.5-M16-B

Side coil/38/220mm/M20

IND1.5-M20-B

Side coil/45/220mm/M22

IND1.5-M22-B

Wire to make coils, D=4 mm

IND1.5-075

FLEXI800 elastic cord, L=800 mm

IND1.5-FLEXI800

Coil wrap / insulation (1 m)

IND1.5-INS

INDUCTOR DRAGON induction heaters

This induction heater is used for the fast flameless heating of metals by means of induction. It facilitates the removal of any locked bolts and nuts. Power supply: 230 V. Maximum power: 2.4 kW. Frequency: 35–100 kHz. IC index

835012

SMART INDUCTOR 5000

This induction heater is used for the fast flameless heating of metals by means of induction. It facilitates to easily remove glued windows, decorative strips, emblems etc. Moreover, it makes it easy to remove locked bolts and nuts. DELUXE version: additional accessories for removing dents without damage to varnish/paint, taking off windows with varnish preserved and Metal Releaser for screw heating. Maximum power: 2.4 kW Frequency: 35–100 kHz. IC index

865011

IC index

865012

A professional induction heater for the servicing of passenger vehicles and vans for repairs and geometry wheel adjustments, at tyre service points and workshops (INDUCTOR 5, 8), for the service of passenger vehicles, vans and trucks, for sheet-metal works, mechanical repairs and servicing semi-trailer repairs (INDUCTOR 10, 12), for the service of trucks for mechanical and post-accidental repairs and servicing semi-trailers (INDUCTOR 18,21)

230

Maximum power 3.5 kW

INDUCTOR5

230

INDUCTOR8

IC index INDUCTOR3IT

210

Power supply NEW

Continuous power 3.5 kW

liquid-cooled

4.5 kW

3.7 kW

liquid-cooled

230

8 kW

5.2 kW

liquid-cooled

INDUCTOR10

400

10 kW

8 kW

liquid-cooled

INDUCTOR12

400

12 kW

10 W

liquid-cooled

INDUCTOR18

400

18 kW

16 kW

liquid-cooled

INDUCTOR21

400

21 kW

liquid-cooled

INDUCTOR18TWIN

400

2x18 kW

2x16 kW

liquid-cooled

WELDING

INVERSPOTTER 13500 SMART AQUA

NEW

Microprocessor-controlled device for double-sided sheet welding using the MFDC (Medium Frequency Direct Current) technology. Designed for welding high-strength and elastic metal sheets (Boron, HSS, AHSS, UHSS) in the automotive industry. The ’POWER CLAMP’ technology, unlike conventional welders, enables high welding current performance and mains current reduction. All welder settings are available on the digital control panel equipped with an LCD display. SMART AUTOSET automatically recognises any type and thickness of welded sheets; the machine will adjust its welding current and optimal working cycles even if the type of welded sheets is not known. 128 default programs; over 400 custom settings can be stored. Source-clamps cable (5 m). Wide selection of additional electrodes. Power supply: 3x400 V Maximum welding current: 12000 A Electrode pressing force: 400 daN Maximum thickness of welded sheets: 3+3+3 mm IC index

823079

INVERSPOTTER 14000 SMART AQUA

NEW

Microprocessor-controlled device for double-sided sheet welding using the MFDC (Medium Frequency Direct Current) technology. Designed for welding high-strength and elastic metal sheets (Boron, HSS, AHSS, UHSS) in the automotive industry. The ’POWER CLAMP’ technology, unlike conventional welders, enables high welding current performance and mains current reduction. All welder settings are available on the digital control panel equipped with a LCD display. SMART AUTOSET (mod.823093) automatically recognises the type and thickness of welded sheets; the machine will adjust the welding current and optimal working cycles even if the type of welded sheets is not known. 128 default programs; over 400 default settings can be stored. Source-clamps cable (5 m). Wide selection of additional electrodes. The welder is approved by: Mercedes-Benz, Ford. The device can be provided for presentation. Power supply: 3x400 V Maximum welding current: 15000 A Electrode pressing force: 580 daN Maximum thickness of welded sheets: 3+3+3 mm IC index

823093

211

WELDING

Electrode welder TECNOARC 211-S IGBT MMA/TIG

Electrode welder V-ARC 201 PRO

Power supply: 230 V Welding current: 200 A

This inverter welder is designed for MMA welding with alkaline rutile electrodes, for stainless steel and cast iron. Features: a function for TIG welding with short arc ignition (TriC211S only). Weight: only 4.7 kg. Electrode diameter: 1.6–4.0 mm.

IC index

TARC211S

IC index

Power supply: 230 V Welding current: 200 A IC index

This inverter welder is designed for welding with alkaline rutile electrodes, for stainless steel and cast iron. Lightweight and portable – weighs only 8 kg. Electrode diameter: 1.6–4.0

Power supply: 230 V Welding current: 180 A

TARC211D

IC index

TARC181

V-ARC201

Power supply: 230 V Welding current: 225 A IC index

V-ARC225

ACCESSORIES

Welding electrodes

Welding shield

General-purpose rutile electrodes for welding in all positions. Packaging: 5 kg.

Large welding shield, 50x100 mm glass, made of press-board IC index

TSD 50x100

Diameter: 2.5 mm, l IC index

E6013/2.5

Diameter: 3.2 mm, l IC index

Diameter: 4.0 mm, l

E6013/3.2

IC index

Triangular welding pads For SPOTTER welders pack: 10 pcs. IC index

802296-10

E6013/4.0

WELDOGER welding gloves

cow split leather, colour: honey, length: 35 cm, kevlar-stitched, single-piece gripping part, 100% leather-made (including cuff ), lined inside, in accordance with the EN388 (4143), EN407 (413X4X) and EN12477 TYPE A standards

1 pair IC index

Corrugated welding wire Corrugated welding wire (200 mm), for SPOTTER welders, pack: 10 pcs. IC index

802728-10

For SPOTTER welders, pack: 10 pcs. IC index

212

802943-10

Carbon upsetting electrodes

Carbon upsetting electrodes, length: 150 mm, for SPOTTER welders, pack: 5 pcs. IC index

Straight welding eye

0XREK101/11/P

802608

TELWIN spot ground

Fast ground for SPOTTER welders IC index

802462

WELDING

ACCESSORIES

Accessories for SMART INDUCTOR 5000 METAL RELEASER Foot-operated control for heating up bolts and nuts IC index

801401

IC index

981147

Accessories for INDUCTOR DRAGON Heater tip Heater tip ferrite ferrite STANDARD B1

IC index

VERTICAL B2

CD358

IC index

Heater tip ferrite

IC index

CD358FR

Two-component ferrite glue

STANDARD A1

CD1621

Extra coils

for SMART INDUCTOR

IC index

IND01154

Heater tip ferrite

STANDARD C1 NEW

IC index

STANDARD C1

CD11N

IC index

Silicone ferrite shield

CD11

Silicone ferrite shield

for INDUCTOR 5–6–8

IC index

IC index 801413-1 801414-1 801415-1 801416-1 801417-1 801418-1

Straight coil10V M8/M10 Straight coil14V M12/M14 Straight coil18V M16/M18 Side coil10H M8/M10 Side coil14H M12/M14 Side coil18H M16/M18

for INDUCTOR 12–18

SC358

IC index

SC11N

Teflon ferrite shield

for INDUCTOR 5–6–8

IC index

TC358

Teflon ferrite shield

for INDUCTOR 12–18

IC index

TC11N

ACCESSORIES FOR PLASMA CUTTERS ITEM

PLASMA 45

TECNOPLASMA 75

TECNOPLASMA 115

R4613104

R4613109

R4613114

R4624102

R4624104

R4624106

R4612101

R4612103

R4612107

R4612114

R2623101

R4623112

R4622101

R4622102

R4622103

Cutting nozzle

Electrode

Outer nozzle

Distance – guide wire

Swirl ring – insulator

213

WELDING

TECNOSPOTTER 5800 DIGITAL

NEW

Microprocessor-controlled device for pulling out, one-sided welding, patching and heating metal plates with the use of a carbon electrode. Automatic selection of welding parameters, digital control panel. The kit includes a punch and welding pads. Maximum welding current: 3800 A. Power supply: 400 V. IC index

TSPOT5

TSPOT5P

IC index

Microprocessor-controlled device for pulling out, patching and heating of metal plates with the use of a carbon electrode. Maximum welding current: 3800 A. Digital control panel.

828119

Microprocessor-controlled device for pulling out, patching and heating of metal plates with the use of a carbon electrode. Maximum welding current: 3800 A. Digital control panel. Includes a welding accessories box.

828119P

Hand-operated welder designed for welding steel and galvanised car plates. Automatic welding time and current adjustments. Maximum thickness of welded sheets: 2+2 mm. Option to extend electrodes. Maximum power: 13 kW. Power supply: 230 V IC index

DIGITAL CAR SPOTTER 5500

Microprocessor-controlled device for pulling out, one- and double-sided welding, patching and heating of metal plates by means of a carbon electrode. Maximum welding current: 4200 A. Digital control panel. Equipped with QuickPuller for small dents.

823232P

DIGITAL CAR SPOTTER 5500 PLUS Microprocessor-controlled device for pulling out, one- and double-sided welding, patching and heating metal plates by means of a carbon electrode. Maximum welding current: 3000 A. Equipped with a trolley. IC index

823016

823232

DIGITAL CAR SPOTTER 5500 PULL

IC index

DIGITAL MODULAR 230/400 welder

TSPOT8P

Microprocessor-controlled device for pulling out, one- and doublesided welding, patching and heating metal plates by means of a carbon electrode. Maximum welding current: 4200 A. Digital control panel. IC index

DIGITAL CAR PULLER 5500 PLUS

IC index

TSPOT8

Equipped with QuickPuller for small dents:

DIGITAL PULLER 5500 IC index

Microprocessor-controlled device for pulling out, one-sided welding, patching and heating metal plates with the use of a carbon electrode. Automatic selection of welding parameters, digital control panel. The kit includes a cart and an equipment box. Maximum welding current: 5400 A. Power supply: 400 V. IC index

Equipped with QuickPuller for small dents: IC index

TECNOSPOTTER 8000 DIGITAL

823000

Power supply: 400 V IC index

823017

RZA-1 Welding machine for copper wires

This special welder is intended to combine copper wires (e.g. coming from graphite brushes) with copper, aluminium or steel. Used for repairs of starters. 12 V battery powered. IC index

214

2222

NEW

WELDING

TECNOTIG 220 AC/DC PULSE

Inverter welding rectifier for TIG welding of aluminium, steel and their alloys. Provided with a digital control panel in Polish and a pulse current welding feature. Welding current adjustment range: 5–220 A.

MAX-TIG 232 AC/DC DIGITAL

TIG kit included in the price

IC index

TTIG220AC

PLASMA 45 PRO

Inverter device for plasma cutting. Enables cutting steel, stainless steel, aluminium, copper and brass without any distortion. Maximum cutting thickness: 12 mm. IC index

PLASMA45

the TIG kit included in the price

IC index

MAXTIG232

MAX-TIG 345 AC/DC DIGITAL

IC index

TECNOPLASMA 75 HF

Inverter device for plasma cutting. Enables cutting steel, stainless steel, aluminium, copper and brass without any distortion. Maximum cutting thickness: 25 mm. IC index

PLASMA75

TECHNOLOGY TIG 182 AC/DC HF/LIFT

Inverter welding rectifier for TIG welding of aluminium, steel and their alloys. Provided with a digital control in Polish and a pulse current welding feature. Welding current adjustment range: 5–160 A. TIG kit included in the price

IC index

TECNOPLASMA 115 HF

Inverter device for plasma cutting. Enables cutting steel, stainless steel, aluminium, copper and brass without any distortion. Maximum cutting thickness: 40 mm. IC index

PLASMA115

MAXTIG345

852030

TECHNOLOGY TIG 222 AC/DC HF/LIFT

Inverter welding rectifier for TIG welding of aluminium, steel and their alloys. Provided with a digital control and a pulse current welding feature. Welding current adjustment range: 5–200 A. TIG kit included in the price

IC index

852054

for parts for plasma cutting machines see page 180

215

WELDING

Semi-automatic welders MIG/MAG

IC index 816085 816086 821016S 821054 821055 821069 821060 821061

NEW NEW

Model MAXIMA 160 SYNERGIC MAXIMA 190 SYNERGIC BIMAX 4.195 SPECIAL TELMIG 170/1 TURBO TELMIG 180/2 TURBO TELMIG 195/2 EURO TELMIG 203/2 TURBO TELMIG 250/2 TURBO

Power supply 230 230 230 230 230 230/400 400 400

Welding current 20–150 A 20–170 A 30–160 A 30–160 A 30–170 A 30–200 A 25–200 A 35–260 A

Welding wire diameter 0.6–0.8 mm 0.6–0.8 mm 0.6–0.8 mm 0.6–0.8 mm 0.6–0.8 mm 0.6–1.0 mm 0.6–1.0 mm 0.6–1.0 mm

Wire feeder 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll

Welding current 40–180 A 40–200 A 40–240 A 50–280 A 50–330 A 50–370 A 45–280 A 45–330 A

Welding wire diameter 0.6–0.8 mm 0.6–1.0 mm 0.6–1.0 mm 0.6–1.2 mm 0.6–1.2 mm 0.6–1.2 mm 0.6–1.2 mm 0.6–1.2 mm

Wire feeder 2-roll 2-roll 2-roll 4-roll 4-roll 4-roll 4-roll 4-roll

Semi-automatic welders MIG/MAG

IC index TMIG195 TMIG200 TMIG220 TMIG280 TMIG330 TMIG370 V-MIG280MMA V-MIG330MMA

Model Power supply TECNOMIG 195 PRO 230 TECNOMIG 200/2 PRO 230/400V 230/400 TECNOMIG 220/3 PRO 400 TECNOMIG 280 4x4 DIGITAL 400 TECNOMIG 330 4x4 DIGITAL 400 TECNOMIG 370 4x4 DIGITAL 400 V-MIG 280 4x4 DIGITAL MMA 400 V-MIG 330 4x4 DIGITAL MMA 400

V-MIG 285 PRO MMA

Professional semi-automatic welder for workshop and production applications. MIG-MAG and MMA coated electrode welding. Wire reel up to 15 kg. 4-roll wire feeder. EURO connector. Digital welding current display. Power supply: 400 V. Welding current: 280 A. IC index

V-MIG285MMA

PRAKTIK MIG 200

216

PMIG200

V-MIG 370 PRO MMA

Semi-automatic welder for workshop applications. MIGMAG in gas shielding and FLUX with self-shielding wire welding. Wire reel up to 5 kg. 2-roll wire feeder. Digital welding current display. Power supply: 230 V. Welding current: 200 A. IC index

NEW

V-MIG370MMA

TECNOMIG 215 MMA DIGITAL

Semi-automatic welder for workshop applications. MIG-MAG in gas shielding, FLUX with self-shielding wire and MMA with coated electrode welding. Wire reel up to 5 kg. 2-roll wire feeder. EURO connector. Digital welding current display. Shelf for a gas cylinder. Power supply: 230 V. Welding current: 200 A. IC index

TMIG215MMA

NEW

WELDING

Inverter MIG/MAG semi-automatic welders Welding semi-automatic unit for a variety of applications: from maintenance works to car-body repairs. Thanks to its flexibility, it can weld various types of materials: steel, stainless steel, aluminium or solder galvanised and high-strength steel car-bodies. Fast synergic adjustment of welding parameters, LCD display (in 816052 and 816053 models only).

IC index

Model

Power supply

Welding current

Welding wire diameter

Wire feeder

816051

TECHNOMIG 180 DUAL SYNERGIC

230

30–170 A

0.6–0.8 mm

2-roll

816054

TECHNOMIG 180 DUAL SYNERGIC EURO

230

30–170 A

0.6–0.8 mm

2-roll

816052

TECHNOMIG 210 DUAL SYNERGIC EURO

230

20–200 A

0.6–1.0 mm

2-roll

816053

TECHNOMIG 215 DUAL SYNERGIC MIG/TIG/MMA

230

20–220 A

0.6–1.0 mm

2-roll

TECNOMIG 220 MMA DIGITAL

TECNOMIG 200GD MIG/MMA/TIG

Semi-automatic welder for workshop applications. Welding by means of MIG-MAG in gas shielding, FLUX with selfshielding wire and MMA with coated electrode. Wire reel up to 5 kg. 2-roll wire feeder. EURO connector. Digital welding current display. Power supply: 230 V. Welding current: 200 A. IC index

TMIG220MMA

TECNOMIG 230/1 PRO MMA DIGITAL

Semi-automatic welder for workshop applications. MIGMAG welding in gas shielding and MMA welding with coated electrode. Wire reel up to 15 kg. 2-roll wire feeder. EURO connector. Digital welding current display. Power supply: 230 V. Welding current: 230 A. IC index

TMIG230/1

TECNOMIG 225 PRO CuSi

Semi-automatic device for welding (soldering) steel and galvanised car bodywork. Lightweight and portable – weighs only 9 kg. Welding current adjustment range: 30–200 A. IC index

TMIG225CUSI

NEW

Semi-automatic device for welding by means of the following methods: MIG-MAG with welding wire in gas shielding, FLUX with self-shielding wire, MMA with coated electrode and TIG Lift (DC) for carbon and stainless steels. Welding current display. EURO connector. Fast synergic adjustment of welding parameters. Wire reel up to 5 kg. 2-roll wire feeder. Power supply: 230 V. Welding current: 200 A. IC index

NEW

TMIG200GD

TECNOMIG 250/2 PRO MMA DIGITAL

NEW

TMIG250/2

TECHNOMIG 223 TREO SYNERGIC EURO Inverter semi-automatic device for MIG-MAG/MMA/ TIG welding. Used for welding steel, stainless steel, aluminium or soldering of galvanised car bodies and high-strength HSS steels. 2 welding torches + SPOOL GUN (*model 816120). Power supply: 230 V. Welding current: 20–220 A. IC index

816058

IC index

816120

217

WELDING

12/24 V surge suppressor Protects electronics in vehicles during welding, soldering, heating and plasma cutting. Double protection (fast TRANSIL diodes + PTC thermistor). For operation at 12/24V. IC index

MAXY REDUCTOR (2 manometers) for a gas cylinder for MIG / MAG and TIG units.

265200

Anti-splinter spray for welding torches. Prevents splinters from getting stuck during welding. IC index

SPRAY ANTYSPAW

Anti-splinter paste

Anti-splinter paste for welding torches. Prevents splinters from getting stuck during welding. IC index

S-8 wire reel adapter

For mounting wire on steel cages in semiautomatic welders. Suitable for a 15-kg welding wire reel. IC index

Anti-splinter spray

CP12/24V

Reducer for gas cylinder IC index

ACCESSORIES

ADAPTER S-8

MIG SG2 welding wire

MIG SG2 welding wire, 15-kg reel Diameter: 0.8 mm IC index

MIG SG2 welding wire MIG SG2 welding wire, 5-kg reel

PASTA ANTYSPAW

DRUT 0,8 15KG

Diameter: 1.0 mm IC index

DRUT 1,0 15KG

Diameter: 0.6 mm IC index

DRUT 0,6 5 KG

Diameter: 0.8 mm IC index

Diameter: 1.2 mm

DRUT 0,8 5KG

IC index

Aluminium MIG welding wire Aluminium MIG welding wire (0.8 mm) for SPOOLGUN torches IC index

DRUT AL 0,8 SPOOLGUN

Aluminium MIG welding wire

Aluminium MIG welding wire (0.8 mm), 2-kg reel

218

IC index

DRUT ALMG5 0,8/2

IC index

DRUT ALMG5 1,0/2

DRUT 1,2 15KG

Stainless-steel MIG welding wire Stainless steel MIG welding wire (308LSi 0.8 mm), 5-kg reel IC index

DRUT LSI 0,8 5 KG

TIG welding consumables

This kit includes welding consumables, torch spare parts and TIG electrodes. Intended for: MAX-TIG 232 AC/DC, TECNOTIG 220 AC/DC, MAX-TIG 345 AC/DC.â&#x20AC;&#x192; IC index

TIGZESTAW100AC

IC index

TIGZESTAW200AC

WELDING

Welding helmets

Welding helmets with a variable degree of protection (DIN 5–8/9–13), variable brightening time and sensor sensitivity settings. Power supply: photovoltaic cell, replaceable battery. Designed for MIG/MAG, TIG and TIG PULSE welding and plasma cutting. filter size

adjustment

grinding

adjustable sensitivity and delays

for plasma cutting

TIG minimum current

replaceable battery

sensors

APS-510G

96x39 mm

9–13 DIN

√

>10A

√, 1xCR2032

APS-616G

100x45 mm

9–13 DIN

√

>5A

√, 1xCR2032

APS-718G

100x53 mm

5–8/9–13 DIN

√

>5A

√, 1xCR2032

APS-918I

98x88 mm

5–8/9–13 DIN

√

<5A

√, 1xCR2450

Types of welding filters

IC index table

APS-510G

APS-616G

APS-718G

APS-510G BLACK

APS-616G BLACK

APS-718G BLACK

APS-510G BLUE

APS-616G BLUE

APS-718G BLUE

APS-510G SILVER

APS-616G SILVER

APS-718G SILVER

APS-510G RED

APS-616G RED

APS-718G RED

APS-510G CARBON

APS-616G CARBON

APS-718G CARBON

APS-510G METAL FLAME

APS-616G METAL FLAME

APS-718G METAL FLAME

APS-510G RACER

APS-616G RACER

APS-718G RACER

APS-510G FIRE CAR*

APS-616G FIRE CAR*

APS-718G FIRE CAR*

APS-510G ABSTRACT*

APS-616G ABSTRACT*

APS-718G ABSTRACT*

APS-510G FLOWER SKULL*

APS-616G FLOWER SKULL*

APS-718G FLOWER SKULL*

APS-510G GREEN VINE*

APS-616G GREEN VINE*

APS-718G GREEN VINE*

APS-918I

APS-918I BLUE* * per individual order

219

WELDING

MIG 15 welding torch

Wear parts 1 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 3.1 3.2

R1044102-5 R1034135-10 R1034136-10 R1034138-10 R1034139-10 R1034140-10 R1034141-10 R1034142-10 R1017101 R1019101-5 R1029101-5 T1010150 T1010151 T1010152

MIG 15 conical gas nozzle 12 mm 5 pcs. M6x25 current tip 0.6 mm 10 pcs. M6x25 current tip 0.8 mm 10 pcs. M6x25 current tip 1.0 mm 10 pcs. M6x25 current tip 1.2 mm 10 pcs. M6x25 current tip 0.8 mm AL 10 pcs. M6x25 current tip 1.0 mm AL 10 pcs. M6x25 current tip 1.2 mm AL 10 pcs. MIG 15 torch body (pipe) MIG 15 tip socket (with a spring) 5 pcs. MIG 15 torch spring 5 pcs.

Complete welding torches

MIG 15/3 welding torch MIG 15/4 welding torch MIG 15/5 welding torch

MIG 25 welding torch

Wear parts 1 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 4 4.1

R1044112-5 R1034150-10 R1034151-10 R1034153-10 R1034154-10 R1034156-10 R1034157-10 R1034158-10 R1019105-5 R1017103 R1029103-5 T1010153 T1010142 T1010154

MIG 25 conical gas nozzle 15 mm 5 pcs. M6x28 current tip 0.6 mm 10 pcs. M6x28 current tip 0.8 mm 10 pcs. M6x28 current tip 1.0 mm 10 pcs. M6x28 current tip 1.2 mm 10 pcs. M6x28 current tip 0.8 mm AL 10 pcs. M6x28 current tip 1.0 mm AL 10 pcs. M6x28 current tip 1.2 mm AL 10 pcs. MIG 25 tip socket 5 pcs. MIG 25 torch body (pipe) 5 pcs. MIG 25 torch spring 5 pcs.

Complete welding torches

MIG 25/3 welding torch MIG 25/4 welding torch MIG 25/5 welding torch

MIG 24 welding torch

Wear parts 1 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 4.1 4.2 5

R1044106-5 R1034135-10 R1034136-10 R1034138-10 R1034139-10 R1034140-10 R1034141-10 R1034142-10 R1019120-5 R1019110-10 R1019145-10 R1017102 T1010155 T1010156 T1010157

220

MIG 24 conical gas nozzle 12.5 mm 5 pcs. M6x25 current tip 0.6 mm 10 pcs. M6x25 current tip 0.8 mm 10 pcs. M6x25 current tip 1.0 mm 10 pcs. M6x25 current tip 1.2 mm 10 pcs. M6x25 current tip 0.8 mm AL 10 pcs. M6x25 current tip 1.0 mm AL 10 pcs. M6x25 current tip 1.2 mm AL 10 pcs. MIG 24 tip socket 5 pcs. MIG 24 gas distributor (platis) 10 pcs. MIG 24 gas distributor (ceramic) 10 pcs. MIG 24 torch body (pipe)

Complete welding torches

MIG 24/3 welding torch MIG 24/4 welding torch MIG 24/5 welding torch

BRAKE SYSTEM

ATE tool trolley

IC index

03.9314-4940.4

drawer 1 – LED workshop lamp (03.9314-5972.3) – hand-held terminator for brake lines (03.9310-0016.4) – mini cutter for brake lines (03.9310-0010.3) – smoother for brake line ends (03.9310-0021.3) – bending unit for brake lines (03.9310-0010.1) – mounting sleeves kit (93.9314-3000.3) – hand-held screwdriver kit (03.9314-0050.3) – Allen socket wrench and ring ratchet kit (03.9314-0100.3) drawer 2 – brake hose clamp (03.9310-0060.3) – piston reversing unit (03.9314-4950.3) – pneumatic piston reversing unit (03.9314-4960.3)

drawer 3 – cleaning brush (03.9314-1320.3) – honing brush (ATE 03.9314-1395.1) – honing brush (LUCAS 03.9314-1396.1) – cleaning file (03.9314-1300.3) – wheel hub cleaning kit (2.1 03.9314-1343.4) – wheel hub cleaning kit (4 03.9314-1370.4)

drawer 4 – test card for magnetic rings (03.9301-0200.1) – electronic calliper for brake discs (03.9314-0011.3) – wide-range clock meter (03.9304-0034.2) – flexible magnetic clock-meter joint (03.9314-0019.2) – knife-edge (03.9314-0022.1) – pliers for medium brake springs (03.9324-5750.3) – pliers for the suspension of hand-brake linkage (03.9309-0080.3) – pliers for the assembly and disassembly of springs (03.9309-0090.3) drawer 5 – spring assembly unit (03.9309-0051.3) – line wrench set (03.9310-0050.3) – bleeding wrench kit (03.9314-1500.3) – brake pedal lock (03.9312-0100.4)

221

BRAKE SYSTEM

Brake fluid change equipment FB 30

Brake fluid testers NEW

In order to replace brake fluid in today’s cars equipped with electronic braking systems, it is necessary to use modern servicing equipment. With the innovative ”electronic pressure control” (EDR) technology with variable and defined pressure levels, the new ATE FB 30 unit sets new standards among filling and bleeding equipment. There are three pressure levels available for filling, rinsing and bleeding brake systems, namely: 0.4/1.0/2.2 bar. In addition, a variable pressure feature in the range of 0.4–3.5 bar is also available. The pressure level can be controlled by means of the manometer. IC index

03.9302-3005.4

FB 30 S

NEW

The ATE FB 30S unit can be regulated between suction and filling/bleeding via its centrally-located ergonomic operating field. The indicator lights indicate the selected feature. All the features are arranged within the operating field in a clear way. There are three pressure levels available for filling, rinsing and bleeding brake systems, namely: 0.4/1.0/2.2 bar. In addition, the variable pressure feature in the range of 0.4–3.5 bar is also available. The pressure level can be controlled by means of the manometer. IC index

NEW

03.9311-0085.4

Bleeding pads – kit (Standard)

The ATE tank adapter kit for the vehicle compensation tank contains five main standard adapters as well as an additional bleeding hose in the reverse direction. This pad kit fits most vehicle brands. IC index

03.9302-0800.3

03.9302-3025.4

FB 5e

ATE FB 5e is a brake bleeding device characterised by very easy operation, a robust construction and a low price. It meets all the requirements in the filling, flushing and bleeding of modern electronic brake systems. In addition, there are two pressure levels available, namely: 1.0 and 2.0 bar. Its operating pressure is set by means of a switch. No manometer control is required due to the predefined pressure. Its special pump generates a pulsating fluid flow which allows the brake system to be fully flushed and bled.

222

03.9311-0080.4

BFT 320 P IC index

This special base plate prevents harsh cracks caused by the brake fluid container. It is equipped with practical grips for a filling hose and the mains cable on the side and three grips for bleeding covers on each side. The device is provided with an easy-to-use tray for storing small parts and tools. Its large front wheels and rear castors in combination with the ergonomic handle ensure the convenient and safe positioning of ATE FB 30 SR, also with a full 30-litre container. There are three pressure levels available for filling, rinsing and bleeding brake systems, namely: 0.4/1.0/2.2 bar. In addition, the variable pressure feature in the range of 0.4–3.5 bar is also available.

IC index

BFT 320 IC index

03.9302-3015.4

FB 30 SR

IC index

Brake fluid is hygroscopic: i. e. with the elapse of time its water content increases, which leads to a drop in the boiling temperature and thus to an increased risk of formation of vapour bubbles within it. Therefore, the brake fluid must be checked regularly and replaced if necessary. With the ATE BFT 320/320P tester, it is possible to measure the boiling temperature of glycol-based brake fluids (DOT 3, DOT 4 and DOT 5.1). The 12-V power supply enables its connection to the battery and convenient measurement directly in the vehicle’s compensation tank. Thanks to the provided container and pipette, measurements can also be made beyond the vehicle. The BFT testers heat up the brake fluid until it is boiled, which allows for the precise determination of its boiling temperature. With the BFT 320 P thermal printer, it is possible to record all measurements results as required by the customer and the workshop. It is located in the tester holder and upon testing, it automatically displays the result of the measurement and suggests to replace the brake fluid (in two copies).

Bleeding pads – kit (PLUS)

The ATE adapter kit for the compensation tank contains four most important adapters for Asian vehicles. This pad kit fits most Asian vehicle brands. IC index

03.9302-0802.3

03.9302-1500.4

BRAKE SYSTEM

DEVICES FOR MAKING LINE TERMINALS The hand-held ATE is an economical tool used to quickly and easily make line terminals with 4.75-, 5- and 6-mm cross-sections according to the DIN 74234 / ISO 4038 standard (E and F forms). IC index

03.9310-0016.4

Mini cutter for brake lines IC index

03.9310-0010.3

IC index

Mini cutter for brake lines IC index

Test card for magnetic rings IC index

03.9301-0200.1

This professional brake line terminal maker is also a practical unit for fast and simple line winding (rewinding) in E and F forms (the DIN 74 234 /ISO 4038 standard.). Line diameter: 4.75, 6, 8 and 10 mm.

03.9310-0021.3

Device for bending brake lines IC index

Collecting bottle IC index

03.9310-0001.4

03.9302-1424.2

03.9310-0030.3

IC index

03.9314-0050.3

Assembly sleeve kit IC index

03.9314-3000.3

IC index

03.9310-0040.3

Device for bending brake lines IC index

Hand screwdriver kit

Pliers for bending brake lines

03.9310-0010.1

Chassis control unit IC index

03.9314-5971.3

223

BRAKE SYSTEM

HUB CLEANING KITS No. 1 dia: 160 mm IC index

03.9314-1330.4

IC index

Alternative friction plates: 160 mm IC index

03.9314-1331.1

Digital calliper for brake discs IC index

03.9314-0011.3

No. 3 dia: 200 mm 03.9314-1350.4

Alternative friction plates: 200 mm IC index

03.9314-1351.1

No. 2.1 dia: 40/53 mm No. 4 IC index

03.9314-1334.4

03.9314-1370.4

Alternative friction Friction plates for the kit plates for 2.1 kit: 40 mm no. 4 (coarse graininess) IC index

03.9314-1344.1

Flexible magnetic joint for clock meter IC index

IC index

03.9314-1374.3

Wide-range clock meter

03.9314-0019.2

IC index

03.9304-0034.2

03.9314-4950.3

IC index

03.9314-4999.4

ATR PISTON REVERSING EQUIPMENT IC index

224

03.9314-9660.3

IC index

BRAKE SYSTEM

Repair tool-case for ATE brake clamps

AST 3 sensor tester

This repair tool-case for brake clamps is used to conduct repairs and provide maintenance of ATE brake clamp leading elements. It includes a total of 118 original ATE parts, which is sufficient to repair up to 20 clamps. The tool-case is supplied with two honing brushes (ATE and Lucas) for guide cleaning. Repair parts can be used on all models of vehicles equipped with ATE brake clamps with fist-type seating. Scope of delivery – the original equipment leading pin 8x 11.8171-0067.1 16x 11.8171-0069.1 (it replaces no. -0008.1) 4x 11.8171-0072.1 4x 11.8171-0096.1 2x 11.0103-0001.2 (repair kit) 2x 11.0103-0002.2 (repair kit) protection cover 10x 11.8190-0067.1 10x 11.8190-0157.2 10x 11.8190-0751.1 leading sleeves 8x 11.8171-0015.2 8x 11.8171-0022.1 8x 11.8171-0061.2 4x 11.8171-0065.2 8x 11.8171-0066.1 8x 11.8171-0073.2 8x 11.8171-0092.1 honing brushes 1x 03.9314-1395.1 1x 03.9314-1396.1 IC index

11.0109-9001.3

ATE cylinder paste

IC index

03.9301-0110.4

Control kit for ESP

Tip: The product information placed in the tool-case cover contains the specification of individual parts along with the ATE material numbers. They can be additionally ordered at any time.

This cylinder paste is an indispensable agent for the repair and assembly of brake hydraulics components to provide excellent lubrication and maintenance. Apply in a thin and smooth layer on: cylinders, pistons, gaskets and other seals.

The 3-Generation ATE AST Tester is a handy device which allows for quick and reliable diagnosis of both passive and active ABS sensors and wheel bearing magnetic rings. This device automatically identifies any type of rotation sensor. In addition to sensor signals it also checks the number of bearing magnetic ring teeth. With the ESP kit (03.9301-0113.2 / 760137), ESP sensors (such as rotation, lateral acceleration and pressure) can also be checked. The ATE AST unit can easily check other vehicle system sensors if their nominal values are known. It is extremely easy to operate the ATE AST sensor tester. The user is guided step by step through commands on the display, therefore no operating instructions are needed. To connect it to the sensor or controller plugs, the ATE AST tester has a universal set of cables together with connection adaptors for the vehicle’s cigarette lighter or battery which have been added to provide a 12-V power supply.

IC index

03.9301-0113.2

Stickers for brake fluid System 220 brake fluid changing disposal equipment Full package: 100 pcs. IC index

Waste brake fluid is disposed of more costefficiently only if it is not mixed with other fluids. Therefore, it must be stored in separate, tightly-sealed containers. The 220 ATE system is the perfect solution here. It consists of a 2-litre collecting bottle and a 220-litre collective barrel.

99.5801-0021.0-16

03.9902-0521.2

IC index

03.9302-0504.3

ATE Plastilube

Plastilube paste is an irreplaceable agent to be applied on clamp guides and brake blocks to lubricate and protect them against corrosion. To prevent brake squeaking, Plastilube paste should be smeared on its topside. ATE Plastilube is non-aggressive and metal-free, so it is also ideal for use in aluminium clamps. Advantages: – free from metal file-dust and fatty acids – excellent corrosion protection – increased lubricity and durability leads to a reduced number of repairs – insoluble in water, resistant to leaching – multilateral application – works fine with all metals and gasket materials.

IC index

03.9902-1001.2

IC index

03.9902-1002.2

225

BRAKE SYSTEM

Tool kit for pressing-in and screwing-in brake pistons right and left thread – 30 elements IC index

0XAT2007

The kit includes right-hand and left-hand thread screws to be used for brake systems in Ford, Citroen, and Renault cars.

0XAT2021

plastic container: 1 l

0XAT2028

with the following swivel heads: 4.75 mm, 3/16”, 1/4”, 5/16” IC index

Brake fluid change unit plastic container: 2.5 l

IC index

Pentagon key kit (3 pcs.) for the servicing of braking systems (Girling, Bendix)

226

0XAT2050

Enables to drain the fluid from the drain valve or completely change the fluid in the system.

0XAT2061

0XAT2077

0XAT2031

Brake fluid change unit 5 l

disc diameter: 40 mm

IC index

0XAT2025

Pocket brake fluid tester

IC index

0XAT2045

Hub cleaning kit IC index

The device is equipped with a 1/2” tip for a wrench or rattle to be attached.

IC index

Brake line terminal kit

0XAT2013

Device for reversing, pressing in brake pistons IC index

Brake fluid change device IC index

right and left thread – 40 elements IC index

Tool-kit for screwing-in brake pistons (18 pcs.) IC index

Tool kit for pressing-in and screwing-in brake pistons

0XAT2075

Tool for brake pads

suitable for large and small spring pads, used on brakes (length: 320 mm) IC index

0XAT2129

BRAKE SYSTEM

For brake fluid Brake disc run-out measuring kit

SPECIAL OFFER

03.0503 Electronic calliper (measuring range: 0–60 mm), electronic sensor (scale range: 0–100 mm), mounting tripod IC index

SEA VS027

Pneumatic brake piston pressing-in and screwing-in kit right and left thread (29 pcs.) IC index

SEA VS0286

For brake lines Brake line terminal tool

on the car, with a diameter of 3/16” SAE and 4.75 mm DIN; steel and copper lines IC index

SEA PFT11

Set of tools

for brake pistons pressing-in and screwing-in, 11 elements IC index

analogue sensor (scale range: 0–12.5 mm), mounting tripod + clamping pliers IC index

SEA VS0290

SG03.0503

Electronic diode brake fluid tester IC index

Brake disc run-out measuring kit

CWB-11

”Pocket” brake fluid tester IC index

SEA VS0272

Electronic calliper

for measuring the thickness of brake discs and cylinders; measuring range: 0–150 mm (0–6”), measuring accuracy: 0.01 m IC index

SEA VS0566

Tool for terminating brake lines

on the car, with a diameter of 3/16” SAE and 4.75 mm DIN IC index

SEA PFT08

Tool / Calliper

for checking size of brake drums, diameter: 165-292 mm IC index

SEA VS040

227

BRAKE SYSTEM

Calliper

for measuring the diameter of brake discs without wheel removal; range: 200–400 mm IC index

for the brake fluid tank, for SEA VS820

SEA VS820SA

bent 90 degrees (for brake clamp pistons)

0XPR3016

SEA VS820

Universal stopper

for the brake fluid tank, for SEA VS820

SEA VS820UA

4-clamp flow blocking kit

in disconnected brake and fuel lines, dimensions: 8 mm (5/16”), 9.5 mm (3/8”), 12.9 mm (1/2”) IC index

Flow blocking kit in disconnected fuel lines IC index

IC index

Pliers for safety rings IC index

plastic container: 2.5 l

0XCM1002

Straight stopper 42 mm IC index

Brake fluid change unit

SEA VS0556

”Pocket” brake fluid tester IC index

SEA VS0274

SEA VS0558

Device for straightening brake lines when reel-unwinding IC index

228

SEA VS5056

BRAKE SYSTEM

MAD DA2002 Automatic device for grinding brake discs MAD was the first company to offer solutions for grinding brake discs directly on the vehicle. Instead of replacing brake discs when in vibration due to wear, differences in their thickness, roughness or hub run-out, they can be simply ground. This method saves both time and money spent on disc disassembly and guarantees the best results. Technical data: Processing parameters Disc run-out: <20 μm 0.02 Millimetre [mm] Differences in disc thickness: <20 μm 0.02 Millimeter [mm] Surface roughness: <1 μm 0.001 Millimeter [mm] Maximum disc thickness: 41 mm Maximum cutting depth: 0.8 mm per side Working height: 450–1250 mm

Power unit: DU2010 Rotation speed: 80–160 rpm Power supply: 100–240V 50Hz Power: 0.4 KW Current: 2.4/3 A Torque: 65 Nm Weight: 49 kg Dimensions: 88x76x135 cm

Grinding unit: DL2002 Feed: 6/12 mm/min Power supply (for the grinder): 36V DC Current: 2 A Weight: 7.8 kg Dimensions: 25x21x21cm (without accessories – below selection) IC index

MAD DA2002

The unit + 3 optional accessories IC index

MAD DA2002KPL

The unit + UMA handle IC index

MAD DA2002UMA

MAD DA8700 Automatic device for grinding brake discs MAD was the first company to offer solutions for grinding brake discs directly on the vehicle. Instead of replacing brake discs when in vibration due to wear, differences in their thickness, roughness or hub run-out, they can be simply ground. This method saves both time and money spent on disc disassembly and guarantees the best results. Technical data: Processing parameters Disc run-out: <20 μm 0.02 Millimetre [mm] Differences in disc thickness: <20 μm 0.02 Millimeter [mm] Surface roughness: <1 μm 0.001 Millimeter [mm] Maximum disc thickness: 39 mm Maximum cutting depth: 0.8 mm per side Working height: 1020–1200 mm Grinding unit: DL8704 Feed: 8.5 mm/min Power supply (for the grinder): 100–240V 50Hz Current: 0.02 A (without accessories – below selection) IC index

MAD DA8700

Weight: 6.2 kg Dimensions: 27x21x17cm Power unit: DU8604 Rotation speed: 100 rpm Power supply: 100–240V 50Hz Power: 0.37 KW Current: 6.8 A Torque: 35 Nm Weight: 37 kg Dimensions: 76x79x135cm

The unit + 3 optional accessories IC index

MAD DA8700KPL

IC index

MAD DA8700UMA

ACCESSORIES

MAD extension kit for clamping system (RED) IC index

IC index

MAD USM2002-B3

MAD fastening system (RED) IC index

MAD USM2002-R2

MAD 22000RL

Blades (DA2002/DL8700)

(2 blades + 2 screws) Straight bit/screw (2-pack) IC index

MAD fastening system (BLUE)

MAD TG2201002

Blades (DA2002/DL8700)

(2 blades + 2 screws) Positive bits/screws (2-pack) IC index

MAD TG2201003

Universal fix kit (UMA2015-00) IC index

MAD UMA2015-00

229

BRAKE SYSTEM

Brake fluid change unit

Universal stopper

+ 5 stoppers IC index

IC index

0XPTBB0001

Liquid containers

Bleeding and fluid changing tool

2 pcs.

IC index

0XPTBB0005

in hydraulic brake and clutch systems with a universal set of stoppers and tanks.

0XPTBB0006

IC index

RA10805

stopper, type A, inner diameter 25 mm IC index

0XPTBB0002

stopper, type I, inner diameter 60 mm, included in the standard equipment (0XPTBB0001)

stopper, type B, inner diameter 21.7 mm IC index

IC index

0XPTBB0003 stopper, type E, inner diameter 48 mm, included in the standard equipment (0XPTBB0001)

stopper, type T, inner diameter 44 mm IC index

0XPTBB0004

IC index

stopper, type D, inner diameter 43 mm, included in the standard equipment (0XPTBB0001) IC index

0XPTBB0007

0XPTBB0008

IC index

(made of copper, copper-nickel, steel) with the following diameter: 4.75 mm, 6.00 mm, 6.35 mm

WP-5-FTD-414

stopper, type G, inner diameter 65 mm, included in the standard equipment (0XPTBB0001) IC index

stopper, type F, inner diameter 52.5 mm, included in the standard equipment (0XPTBB0001)

Tool for making brake line terminals IC index

0XPTBB0010

0XPTBB0009

0XPTBB0011

stopper, type M, inner diameter 68.5 mm, included in the standard equipment (0XPTBB0001) IC index

0XPTBB0012

Tool for making brake line terminals with the following diameter: 4.75 mm (3/16’) and 6.35 mm (1/4’) IC index

WP-5-WJ0100

PRO-CUT PFM 9.1 Brake disc grinder

This device is unique on the market due to its: – Innovative method of direct disc grinding on the vehicle’s hub. – Full automation with electronic blade run-out compensation for perfect surface finish with run-out values below 0.025 mm. It takes just 9 minutes to properly grind a single brake disc when both disc surfaces are machined at the same time. – The PRO-CUT 9.1 unit can be used with each and every type of car discs up to 3.5 t (front, rear, solid, ventilated, drilled or cut, apart from ceramic or carbon-ceramic ones). – Complete with a mobile trolley equipped with height adjustment and a set of 4 adapters for the service of most vehicles. IC index

230

PRO-CUT 9.1

TECHNICAL DATA: Disc diameter: 102 mm – 436 mm Disc thickness: 5.1 mm – 44.4 mm Cutting depth: 0.13 mm / side

HEATING, EXHAUST EXTRACTORS

Heaters, fans, dehumidifiers Oil heater 18,5 kW IC index

B65CEL

2 kW

B2PTC

IC index

BF35

Fan

6.600 m3/h IC index

DF20P

B150CED

Electric heater 3,3 kW IC index

Stationary heater 34 kW

44 kW IC index

Electric heater IC index

Oil heater

B3,3EPB

Gas heater 16 kW IC index

BLP17M

Fan

10.200 m3/h IC index

DF30P

Oil heater 20 kW IC index

BV77

Electric heater 15 kW IC index

B15EPB

Gas heater 33 kW IC index

BLP33M

Dehumidifier 20 l/24h IC index

DH732

231

WORKSHOP HEATING SYSTEMS

PROFESSIONAL PERFORMANCE

SMH 33 AIR HEATER BASED ON UNIVERSAL FUEL High-quality heater based on UNIVERSAL OIL intended for the heating of industrial spaces not covered by the central heating system (service centres, car workshops, industrial halls, warehouses).

Types of fuels to be used in the heater: – vegetable oils (BIOFUELS) – waste vegetable oils (gastronomy) – light heating oil – others

MODEL

POWER [kW]

FUEL CONSUMPTION [L]

AIR DELIVERY [m3/h]

TANK VOLUME [L]

CURRENT CHARGE [A]

SMH 33

17–33

1.7–3.3

1 000

0.8

HIT

L CIA E P S FFER

IC index - SMH 33

RECUPERATOR FOR SMH 33 STOVE

IC index - REKUPERATOR

The rise in energy and fuel prices has forced us to use energy more efficiently. Our product range includes a state-of-the-art unit for energy recovery from exhaust gases. A RECUPERATOR is a compact structure consisting of a tubular heat exchanger and casing with an efficient blower fan, forming together one unit.

INCREASED

Efficiency

up to 91%

The RECUPERATOR is installed directly behind the heater on a vertical section of the fuel pipe. RECUPERATORS can provide the transfer of recovered heat through air channels directly to any other room (e.g. office, social facilities, etc.), which is its additional advantage.

ARTEL EASY ECOLOGICAL FREE-STANDING STOVES BASED ON PELLET The Easy series stoves havea modern design and are ideal for contemporary interiors. These units are automated and can be controlled from both the control panel and a remote control. The control system enables automatic heating, temperature control and daily programming.

MODEL

UNIT

EASY S

EASY M

EASY L

HEATING POWER

[kW]

2.84–6.97

2.84–8.87

2.84–10.10

HEATED SURFACE

[m2]

100

VOLCANO WATER HEATERS

equipped with an energy-efficient EC motor, mounting console and an HMI VR 0-10V programmable controller. VOLCANO air heaters are new-generation devices combining innovative technical solutions with a modern industrial design. The precisely-crafted, lightweight body of its casing resembles the beautiful (and at the same time perfect in its simplicity) form of a diamond. The device’s ’character’ is emphasised by the composition of selected materials and dynamically shaped air blades. This series is available in four versions of heaters and in one option of a destratificator, in versions with a single-row (VR 1), double-row (VR Mini, VR2) or a three-row heat exchanger (VR3).

HEATER + CONSOLE + CONTROLLER

ECONOMIC AND RELIABLE

SOLUTIONS FOR YOUR COMPANY

WORKSHOP HEATING SYSTEMS

PROFESSIONAL PERFORMANCE

CHIMNEY KIT* FOR SMH 33 STOVE

MK Chimney Systems is one of the largest manufacturers of stainless-steel exhaust systems in Poland, which is not only a determinant of quality, but also a company which introduces innovative solutions. IC index - SMH 33.21 The kit contains: • Tube (1 running m.) – 5 pcs. • Adjustable elbow – 2 pcs • Roof – 1 pc. • Clasp – 3 pcs. • Adapter – 1pc. * Single-walled, uninsulated pipes

SPARE PARTS FOR SMH 33 AIR HEATER SMH.33.06

SMH.33.18

BOWL / FURNACE (fits SMH-33, HP-125, HP-115, MTM-33)

SMH.33.07

WIRE RING (fits SMH-33, HP-125, HP-115, MTM-33)

SMH.33.05

SMH.33.14

COMBUSTION CHAMBER (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.11

FAN (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.17

SMH.33.01

FLOW-OVER MICROSWITCH (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.04

FINAL FUEL FILTER (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.16

GEARED MOTOR (SMH-33)

SMH.33.19

COMBUSTION CHAMBER SUPPLY SYSTEM (SMH-33, HP-125, HP-115, MTM-33)

FURNACE RING (fits SMH-33, HP-125, HP-115, MTM-33)

OVERHEAT THERMOSTAT (top, SMH-33, HP-115, HP-125)

SMH.33.03

SHOVEL (SMH-33, HP-125, HP-115, MTM-33)

CONTROL BOARD for SMH 33

ECONOMIC AND RELIABLE

SMH.33.08

COMBUSTION CHAMBER COVER (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.13

THRUST CONTROLLER (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.15

BIMETALLY THERMOSTAT (bottom, SMH-33, HP-125, HP-115)

SMH.33.20

DRIVE KIT, SMH 33 kit (upon programming also for HP-115, HP-125)

SOLUTIONS FOR YOUR COMPANY

SMH.33.09

HOT AIR PIPE (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.10

INITIAL FUEL FILTER (SMH-33, HP-125, HP-115, MTM-33)

SMH.33.02

FUEL PUMP for SMH-33

SMH.33.12

FUEL TANK (SMH-33, HP-125, HP-115, MTM-33)

HEATING, EXHAUST EXTRACTORS

Single extractor with balancer

Hose length: 7,5 m Hose diameter: 100 mm

- balancer-type hose suspension - hose temperature resistance up to + 180째C - rubber exhaust nozzle - wall mounting - power supply: 3 x 400 V, 50 Hz

Hose type: NR-B

IC index:

Fan: 0,37 kW

P6-4996-101B

NEW PRODUCT!

36 MONTH WARRANTY

it is possible to change the exhaust nozzle (next page)

Exhaust hose reel

Hose length: 7,5 m

- spring drive - NR-CP exhaust hose - hose temperature resistance up to +180째C - ceiling / wall mounting - power supply: 3 x 400 V, 50 Hz

Hose diameter: 100 mm Fan: 0,37 kW

IC index:

P5-4601-100

IC index:

P5-4601-104

IC index:

P5-4601-154

IC index:

P5-4603-100

IC index:

P5-4611-150

IC index:

T06-14L-N25C

IC index:

T12-14L-N25C

IC index:

T12-24L-N25C

IC index:

T12-16L-N25B

Nozzle type: rubber Hose length: 10 m Hose diameter: 100 mm Fan: 0,75 kW

36 MONTH WARRANTY

Nozzle type: rubber Hose length: 10 m

other configuration available on request

it is possible to change the exhaust nozzle (next page)

Hose diameter: 150 mm Fan: 0,75 kW Nozzle type: rubber

Exhaust hose reel

- electric drive - NR-CP exhaust hose - hose temperature resistance up to +180째C - ceiling/wall mounting - power supply: 3 x 400 V, 50 Hz other configuration available on request

Hose length: 10 m Hose diameter: 100 mm Fan: 0,75 kW Nozzle type: rubber Hose length: 10 m Hose diameter: 150 mm

36 MONTH WARRANTY

it is possible to change the exhaust nozzle (next page)

TECHNORAIL rail exhaust extractor

- manual fan shut-down - line-type hose suspension - NR-B exhaust hose (diameter: 100 mm) - hose temperature resistance up to +180째C - exhaust nozzle type rubber-oval - power supply: 3 x 400 V, 50 Hz

Fan: 0,75 kW Nozzle type: rubber

Rail length: 6 m No. of trolleys: 1 Hose length / diameter: 5 m / 100 mm Fan: 0,37 kW Rail length: 12 m No. of trolleys: 1 Hose length / diameter: 5 m / 100 mm Fan: 0,37 kW

36 MONTH WARRANTY

Rail length: 12 m No. of trolleys / hoses : 2 / 2

it is possible to change the exhaust nozzle (next page) other configuration available on request

234

Hose length / diameter: 5 m / 100 mm Fan: 0,75 kW Rail length: 12 m No. of trolleys: 1 Hose length / diameter: 5 m / 150 mm Fan: 0,75 kW

HEATING, EXHAUST EXTRACTORS

Single extractor

Hose length: 5 m

- line-type hose suspension - S hose temperature resistance up to + 150°C - NR-CP hose temperature resistance up to + 180°C - aluminium exhaust nozzle - rubber exhaust nozzle (P6-4996-101) - wall mounting - power supply: 3 x 400 V, 50 Hz

Hose diameter: 100 mm Hose type: S

IC index:

S6-4996-100

IC index:

P6-4996-101

IC index:

P6-4996-151

IC index: index: IC

S6-4996-076

IC index:

P6-4996-106

Fan: 0,37 kW Hose length: 7,5 m Hose diameter: 100 mm Hose type: NR-CP Fan: 0,37 kW

36 MONTH WARRANTY

Hose length: 7,5 m Hose diameter: 150 mm

it is possible to change the exhaust nozzle (look down)

Hose type: NR-CP Fan: 0,75 kW

Double extractor

- line-type hose suspension - S hose temperature resistance up to + 150°C - NR-CP hose temperature resistance up to + 180°C - fan 0,75 kW - wall-mounted - power supply: 3 x 400 V, 50 Hz

Hose length: 2 x 5 m Hose diameter: 75 mm Hose type: S Nozzle type: aluminum

36 MONTH WARRANTY

Hose length: 2 x 7,5 m Hose diameter: 100 mm Hose type: NR-CP Nozzle type: rubber

it is possible to change the exhaust nozzle (look down)

Exhaust nozzles with mechanical quick release clamping device

it is possible to change the nozzle in the marked products for this purpose, contact the Inter Cars

rubber, oval - temp. resistance up to +180°C

aluminium, round - temp. resistance up to +300°C

rubber, pneumatic - temp. resistance up to +180°C

rubber, round - temp. resistance up to +150°C

Hose connecion: 100 mm

Hose connecion: 100 mm, 45˚

Hose connecion: 100 mm

IC index:

25-4936-100

IC index:

25-4932-100

IC index:

25-4937-100

IC index:

SMG-100/125-G

Exhaust extractor for motorcycles – kit includes a hose, exhaust nozzle and a fan - NR-CP exhaust hose (up to +180°C) - power supply: 3 x 400 V, 50 Hz

Hose length: 5 m Hose diameter: 125 mm Fan: 0,37 kW

IC index:

P6-4996-111

IC index:

P6-4996-112

Nozzle type: oval

Hose length: 5 m Hose diameter: 125 mm Fan: 0,37 kW Nozzle type: rectangle P6-4996-112

P6-4996-111 The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

235

HEATING, EXHAUST EXTRACTORS

Exhaust hose for exhaust gases - NR-B hose, hose length 5 m - hose temperature resistance up to + 180°C - steel spiral in a rubber braid

Extraction arm for exhaust gases

- hose type NR-B - temperature resistance up to +180°C - wall-mounted - power supply: 3 x 400 V, 50 Hz

36 MONTH WARRANTY

NEW PRODUCT ! Arm length: 3 m Hose diameter: 75 mm

Hose diameter: 100 mm

Weight: 3,5 kg

Weight: 5,0 kg

Hose diameter: 160 mm Fan: 0,37 kW Nozzle: with a throttle

IC index:

20-967-076/5M

IC index:

20-967-101/5M

Single exhaust extractor

IC index:

EVERT-1.3

IC index:

EVERT-1.4

IC index:

EVERT-1.5

Hose diameter: 75 mm Fan: 0,37 kW Nozzle: metal-rubber Hose length: 5 m

Other braid colours are available on request.

Hose diameter: 100 mm Fan: 0,37 kW Nozzle: metal-rubber

24MONTH WARRANTY

Hose length: 5 m Hose diameter: 125 mm

it is possible to change the exhaust nozzle (previous page)

Mobile PROFITOOL exhaust extractor for passenger cars - hose length: 3 m, construction length: 1.2 m - pneumatic power supply - air demand: 450 l/min - working pressure: 90 psi

0XAT4075

Fan: 0,55 kW Nozzle: aluminium

Double exhaust extractor

- shelf-type hose suspension - FC-2 hose, diammeter 100 mm - hose temperature resistance up to + 150°C - metal-rubber exhaust nozzle - wall-mounted - with fan 0,55 kW - power supply: 3 x 400 V, 50 Hz

EVERT-2.0

IC index:

Mobile EVERT exhaust extractor for passenger cars - hose length: 6 m (diameter: 121 mm) - working range: 250–750 mm - engine: 0,55 kW, power supply: 230 V IC index:

S18017-001

Hose length: 5 m

- shelf-type hose suspension - FC-2 hose - hose temperature resistance up to + 150°C - wall-mounted - power supply: 3 x 400 V, 50 Hz

IC index:

24MONTH WARRANTY

it is possible to change the exhaust nozzle (previous page)

EVERT5000

Adapter with exhaust nozzles Mobile EVERT exhaust extractor for passenger cars with a dual exhaust system - hose length: 5 m (diameter: 121 mm) - working range: 250–1350 mm - engine: 0.55 kW, power supply: 230 V

IC index:

236

EVERT5025

for double exhaust systems - mechanical nozzles manual clamping device - suction nozzle inlet: 155 x 85 mm - hose length: 2 x 800 mm, diameter: 100 mm - temperature resistance (for a hose and nozzles) up to + 180°C - oval input

IC index:

28-4974-000

BATTERIES SERVICING

Battery service BAT 415 high-frequency charger

Provided with the following functions: microprocessor-controlled charging process, support for all types of lead-acid batteries (no maintenance, standard, gel and non-woven AMG-type batteries). 12-V battery charging mode. Charging with no need to disconnect battery from the system. Support- and buffer-charging mode. Charging support for heavily-discharged (”flat”) batteries. Smoothly adjustable charging current. Rated current: 15 A. IC index

0 687 000 015

BAT 490 high-frequency charger

Powerful charger for 12/24 V batteries of all types (no maintenance, standard, gel and non-woven batteries, AMG type). Charging with smoothly adjustable charging current up to 90 A stabilises the vehicle voltage when under diagnosis – it is suitable for re-programming controllers. Support- and buffer-charging mode. Charging support for deeply-discharged (”flat”) batteries. IC index

0 687 000 049

SUBJECT TO STOCK AVAILABILITY

BML 2415 electronic charger

For charging 12/24 V batteries with no need to unplug them from the system. For continuous and buffer charging. IC index

0 687 000 025

BAT 430 high-frequency charger

Provided with the following functions: microprocessor-controlled charging process, support for all types of lead-acid batteries (no maintenance, standard, gel and non-woven AMG-type batteries). Battery charging mode: 12/24 V with the automatic switch-over mode. Charging with no need to disconnect the battery from the system. Support- and buffer-charging mode. Charging support for heavily-discharged (”flat”) batteries. Smoothly adjustable charging current. Rated current: 30 A in the 12/24 V mode. IC index

0 687 000 016

BAT 645 / BAT 690 – FULLY AUTOMATIC, UNIVERSAL BATTERY CHARGERS

The two new universal battery chargers (BAT 645 and BAT 690) from Bosch are equipped with 45-A or 90-A current outputs. Both chargers can be used for 12-V passenger car batteries and 24-V commercial vehicle batteries. They automatically detect the required nominal voltage. IC index

0 687 000 164

IC index

0 687 000 169

BSL 2470 charger with the start-up feature

Start-up support up to 375 A. Smooth charging current regulation. For vehicles with sensitive electronics. Buffer, continuous and fast charging. IC index

0 687 000 101

Professional ChargeXpress PRO rectifier line

These chargers are portable, safe, fast and easy to use. – very fast charging (max 6 hours) – support for PB, AGM and GEL batteries – battery type selection with just one button – voltage maintenance program – battery replacement without data loss

ChargeXpress PRO 25

ChargeXpress PRO 50

Application:

12-V PB, AGM/Spiral and Gel batteries for automotive, Agro vehicles and boats

12-V PB, AGM/Spiral and Gel batteries for automotive, Agro vehicles and boats - 24 V HGV (2 x 12 V)

Cables:

5 m (replaceable)

2 x 5 m (replaceable)

Index:

CX-PRO25-5MTR

CX-PRO50-2

237

BATTERIES SERVICING

Standard rectifiers and rectifiers with start-up function

index

power supply

charging voltage

charging current

battery capacity

807592

230 V

12/24 V

6/3 A

WET/GEL/AGM

50/1115 A 30/55 A

807593

230 V

12/24 V

9/6 A

WET/GEL/AGM

60/180 A 50/115 A

807545

230 V

12/24 V

9/5 A

14/185 A 6/90 Ah

807546

230 V

12/24 V

12/8 A

30/225 A 20/180 Ah

807547

230 V

12/24 V

20 A

15/400 Ah

807548

230 V

12/24 V

30 A

20/500 Ah

807063

230 V

6/12/24/36/48 V

11 / 30 / 30/ 30 / 27 A

10 / 300 Ah

807562

230 V

12 V

16 A

charging voltage

charging current

automatic

10 / 250 Ah

Standard rectifiers and rectifiers with start-up function

index

power supply

SPRINT 15

230 V

12/24 V

15 A

25/150

SPRINT 20

230 V

12/24 V

20 A

60/200

SPRINT 30

230 V

12/24 V

30 A

92/250

SMART CHARGER 7 (6/12V) rectifier

SMART CHARGER 4 (6/12 V) rectifier

Automatic rectifier used to charge all types of lead-acid, gel and AGM batteries. It is provided with the following functions: microprocessor control system, 7-stage charging process, digital LED display. Splash- and dustproof (IP65). Capacity range: 1.2–30 Ah (6 V), 14–220 Ah (12 V), maintenance up to 300 Ah. Charging current: 3.5 A(6V), 7 A(12V).

Automatic rectifier used to charge all types of lead-acid, gel and AGM batteries. Provided with the following functions: microprocessor control system, 7-stage charging process. Splash- and dust-proof (IP65). Capacity range: 1.2–14 Ah (6 V), 14–120 Ah (12 V), maintenance up to 160 Ah. Charging current: 2A(6V), 4A(12V). IC index

SMART4

IC index

Rectifier PRAKTIK CHARGER 4 LCD

NEW

Intelligent, portable charger for 6 and 12 volt acid, gel, AGM, MF, EFB batteries. LCD display. Winter mode - cold batteries charging function: optimizes charging at very low temperatures. 230V power supply, 6 / 12V charging voltage, charging current 1/4A. IC index

238

battery capacity

PCHARGE4

SMART7

DOCTOR CHARGE 50 (6/12/24V) rectifier

Multifunctional Power-Stream rectifiers are intended to charge leadacid, gel and AGM batteries. Provided with the following functions: 8-stage charging process, cold battery charging, quiet (night-time), desulphurisation and levelling programs. Power supply when programming vehicles. Charging current: max 45 A. Volume range: 10–600 Ah. IC index

807586

BATTERIES SERVICING

Rectifiers with start-up function

index

power supply

charging voltage

charging current

start-up current

battery capacity

807538

230 V

12 V

14 A

80 A

25/250 Ah

807539

230 V

12/24 V

20 A

120 A

30/400 Ah

807551

230 V

12/24 V

30 A

180 A

20/700 Ah

DYNAMIC420

230 V

12/24 V

50 A

300 A

20/1000 Ah

DYNAMIC520

230 V

12/24 V

50 A

300 A

20/1000 Ah

DYNAMIC620

230 V

12/24 V

70 A

360 A

20/1550 Ah

829385

3x400 V

12/24 V

80 A

640 A

20/1200 Ah 20/800 Ah

829008

3x400 V

12/24 V

80 A

640 A

20/1200 Ah 20/800 Ah

829009

3x400 V

12/24 V

130/220 A

1000/1300 A

70/2000 Ah 70/4000 Ah STARTER 420P / STARTER 620P

Rectifiers with start-up function

index

power supply

charging voltage

charging current

starting current

battery capacity

SPRINT 400

230V

12/24V

30A

180A

20/500 Ah

STARTER 440

230V

12/24V

40A

300A

40/700 Ah

STARTER 640

230V

12/24V

60A

500A

40/1000 Ah

STARTER 840

230V

12/24V

80A

700A

20/1200 Ah

STARTER 1500

3x400 V

12/24V

160A

1000A

40/1300 Ah

STARTER 420P

230V

12/24V

40A

300A

40/700 Ah

STARTER 620P

230V

12/24V

60A

500A

40/1000 Ah

Rectifier DOCTOR CHARGE 130 12/24V

Multifunctional Power-Stream rectifiers are intended to charge lead-acid, gel and AGM batteries. They are provided with the following functions: 8-stage charging process, cold battery charging, quiet (nighttime), desulphurisation and levelling programs. Power supply when programming vehicles. Start-up support. Charging current: max 80 A. Volume range: 20â&#x20AC;&#x201C;1200 Ah. Welding current: 180 A IC index

807590

NEW

Rectifier DOCTOR START 330/630 12/24V

NEW

DOCTOR START 330/630 is a multifunctional electronic rectifier for comprehensive service of 12 / 24V WET wet-acid batteries, GEL gel, AGM with fiberglass mat (MF, maintenancefree, spiral, for systems Start-Stop), lithium and support activities in car services and showrooms. Designed for: automatic loading and maintenance with PULSE-TRONIC technology, battery testing, starting current and alternator, vehicles starting assistance, desulphurisation and regeneration of batteries. It is also a source of stable voltage during battery replacement, programming, diagnostics and during work in car showrooms. 30A charging current. Capacity range 10-450Ah. Starting current 180A IC index

829341

70A charging current. Capacity range 10-1050Ah. Starting current 360A IC index

829342

239

FOR CASUAL USERS WWW.CTEK.COM BATTERY CHARGER CT5 POWERSPORT The CTEK CT5 POWERSPORT battery charger is the best friend of PowerSports vehicles i.e. jet-skis, quads and motorcycles which must be ready at all times for quick use. To meet this need, CTEK Co. has invented a charger which also loads BMW motorcycles featuring the CANBUS technology. This is a 12-V device with a capacity of 5–25 Ah. IP65.

Prod. no. 40-136

NEW!

BATTERY CHARGER CT5 TIME TO GO

The CTEK CT5 TIME TO GO battery charger has revolutionised the market – as the first charger in the world, it shows the time left for the battery to be fully charged and ready. This way you know when your vehicle will be ready to start up again. The charger is a 12-V device witha capacity of 20–160 Ah. IP65.

Prod. no. 40-161

NEW!

BATTERY CHARGER CT5 START STOP

The CTEK CT5 START STOP battery charger is the ideal solution for cars featuring the Start Stop technology. And CTEK Co. has designed a device that is specialised in the Start Stop battery charging program. The charger is a 12-V device with a capacity of 14–130 Ah. IP65.

Prod. no. 40-107

NEW!

BATTERY CHARGER MXS 3.8

The MXS 3.8 battery charger is a microprocessor-controlled unit with the patented back-up/ pulse charge maintenance mode. It solves a wide range of battery problems and is ideal for everyday use. The changer checks the battery status before charging to verify if it is able to receive and keep electrical charge. When charging the MXS 3.8 unit also makes use of the automatic desulphurisation process. The Special Snowflake mode ensures optimal charging parameters under frosty weather conditions.

Prod. no. 40-001

BATTERY CHARGER MXS 5.0

BATTERY CHARGER MXS 5.0 TEST & CHARGE

BATTERY CHARGER MXS 7.0

The MXS 5.0 battery charger is a fullyautomated 8-phase unit charging 12-V batteries with a capacity of 1.2–110 Ah with 0.8 A or 5 A which is suitable for the maintenance charging of batteries with a capacity of up to 160 Ah. The charger is IP65classified (splash- and dust-proof) and designed to ensure the protection of the vehicle’s electronics. It is also a sparkfree device secured against reverse polarity and short-circuits. It is covered by a 5-year warranty.

The MXS 5.0 TEST & CHARGE battery charger is a combination of a technologically-advanced charger and microprocessor-controlled batteries equipped with a battery and alternator tester, which is the highest achievement in the field of battery testing, charging and maintenance. The MXS 5.0 TEST & CHARGE unit is easy and safe to use, ensures the protection of the vehicle’s electronic systems, does not cause sparks and is secured against reverse polarity and short circuits. It is covered by a 5-year warranty.

Prod. no. 56-998

Prod. no. 56-308

The MXS 7.0 battery charger is a fully-automated 8-phase unit for charging 12-V batteries with a capacity of 14–150 Ah with 7 A which is suitable for the maintenance charging of batteries with a capacity of up to 225 Ah. The charger is IP65classified (splashand dust-proof) and designed to ensure the protection of the vehicle’s electronics. It is also a spark-free device secured against reverse polarity and short-circuits. It is covered by a 5-year FEATURES warranty. • Power mode • Regeneration

Prod. no. 56-754

FOR PROFESSIONALS WWW.CTEK.COM BATTERY CHARGER MXTS 40

BATTERY CHARGER MXS 10

The MXTS 40 battery charger is an essential device suitable for daily use in workshops servicing 12-V and 24-V vehicles. It is easy to use, safe for vehicle electronics and provided with a fast charging mode. It is also suitable for the support and regeneration of batteries. The MXTS 40 unit automatically supplies constant voltage, so that ECu damage can be avoided due to voltage fluctuations when programmed. It complies with the IP20 standard and is covered by a 2-year warranty.

The MXS battery charger 10 is a fully-automatic 8-stage unit for charging 10-A up to 12-V batteries (from 20–200 Ah) and enables maintenance charging up to 300 Ah. The charger is IP65 rated (water and dust protection) and is designed to ensure the protection of automotive electronic components (including spark and reverse polarity and shortcircuit protection). It is covered by a 2-year warranty.

Prod. no. 56-995

Prod. no. 56-843

BATTERY CHARGER MXS 25 & MXS 25 EXTENDED

Prod. no. 56-732

The MXS 25 battery charger is a fullyautomatic, 8-phase incremental unit which provides 25 A to 12-V batteries with a capacity of 40–500 Ah. The charger is IP44-classified (for outdoor use) and designed to protect the vehicle’s electronics. It is also a spark-free device secured against reverse polarity and short-circuits. It is covered by a 2-year warranty. Extended: Complete with a hanger and a 6-m cable. FEATURES

ACCESSORIES COMFORT INDICATOR - EYELET M8 Prod. no. 56-382

COMFORT INDICATOR - CIG PLUG Prod. no. 56-870

• Power mode • Regeneration

MOUNTING BRACKET

Prod. no. 40-065

Prod. no. 40-006

BATTERY CHARGER MXTS 70/50 The MXTS 70/50 battery charger is a fullyautomated unit which provides 8-stage charging with a choice of 50 A/12 V or 50 A/24 V charging current intended for batteries with a capacity of 20-1500 Ah for both 12 V and 24 V, respectively. The charger is equipped with a robust aluminium housing for use in harsh environments. It is IP20rated and designed to protect the vehicle’s electronics.

Prod. no. 40-016

COMFORT INDICATOR - CIG PLUG Prod. no. 56-263

CTEK BATTERY SENSE Prod. no. 40-149

With the CTEK Battery Sense you can monitor the status of a car, tractor, motorcycle battery etc. with more than 4.5 Ah. Automatic data synchronization via Bluetooth. Compatible with Android (from ver. 4.4) and IOS (from ver. 7.).

BATTERIES SERVICING

MDX-645P Conductive tester

MDX-335P Conductive tester

Equipped with a printer for testing 6-V and 12-V PB, AGM, Gel batteries. Specification: – testing batteries from 100 to 2000 CCA – testing batteries discharged to 1 V – detection of damaged cells – temperature compensation – voltmeter – printer

Equipped with a printer for testing 12-V PB, AGM, Gel batteries. Used to run ignition and alternator tests on passenger cars and commercial vehicles. Specification: – testing batteries from 100 to 900 CCA – testing batteries discharged to 1 V – detection of damaged cells – temperature compensation – ignition and alternator tests – voltmeter – printer IC index

IC index

MDX-335P

MDX-655P Conductive tester

INTECH25C Tester for 12-V PB and AGM batteries

Equipped with a printer for testing 6-V and 12-V batteries, 12-V and 24-V start-up and charging systems as well as PB, AGM and Gel batteries. Used to run ignition and alternator tests on passenger cars and commercial vehicles. – testing batteries from 100 to 2000 CCA – testing batteries discharged to 1 V – detection of damaged cells – temperature compensation – ignition and alternator tests (305-cm cables) – voltmeter – printer IC index

MDX-645P

Used to run ignition and alternator tests. Specification: – measuring range: 200–900 EN/SAE – voltmeter – temperature compensation – ignition and alternator tests IC index

INTECH25C

MDX-655P

INTECH15C Tester SPECIAL OFFER MIDTRONICS EXP-1000 series This is the most advanced diagnostic device for all types of batteries and for 12-V PB and AGM electrical systems. The tester enables the diagnosis of individual electrical components from a battery up to a starter or alternator. batteries Specification: – measuring range: 200–900 EN/SAE – voltmeter – temperature compensation IC index

INTECH15C

Technical parameters: – 6/12 V batteries operated – PB, AGM, GEL batteries supported – measuring range: EN 100–3000 A – 12/24 V starting system test – 12/24 V charging system test – voltmeter (AC 0–24 V) – ohmmeter (10–2 M Om) – amperemeter (AC 0–700 A) – diode test (0–1.5 V) – temperature measurement: from -29 to + 93 IC index

The overview photo shows the complete set.

EXP-1000 EST

IC index

EXP-1000 EST HD*

* the dedicated version for trucks and specialised vehicles, battery pack test

BAT 110 Battery tester

Battery tester for checking unloaded 12 V lead-acid batteries (standard, maintenance-free, non-woven AGM and gel types). Features: – charging status check, – battery diagnosis, – voltage measurement, – starting system test – charging system test IC index

242

0 986 AT0 550

BAT 131 Battery tester

Tester for 6-V and 12-V batteries (lead-acid, gel, non-woven / AGM) with a built-in printer and USB connector. Battery status test and battery failure detection. Optimised algorithm for testing factory new batteries. Extended starter/charging test for 12-V and 24-V batteries. IC index

0 684 400 731

BATTERIES SERVICING

TELWIN T200

6/12 V battery tester, operated under the charging method IC index

6/12 V, operated under the charging method, measuring range: 200–1000 CCA

IC index

LBT100

with a printer for 12 V batteries, start-up and charging efficiency tests, provided with a Polish menu, measurement range: 50–1400 CCA IC index

BDT4000

802665

Battery tester

used to run charging efficiency and voltage drop tests, equipped with a printer IC index

007950006900

Battery tester IC index

0XAT7061

8PD 009 734-041

Terminal (clamp) battery cleaning kit

(aerometer)

IC index

0XPTTIBT901

Voltage support device

to keep ”memory” during 12-V battery replacement, connection to an EOBD or lighter socket, cable length: 1.4 m, internal battery: 12 V, 4 Ah IC index

IC index

BDT4000 Digital tester

Tester for checking electrolyte density IC index

12-V digital battery tester, start-up and charging efficiency tests

802605

Controller for BPC-Tool batteries IC index

TELWIN DTS700

digital 12-V battery tester

802517

LBT100 Battery tester IC index

TELWIN DT400

SEA VS2071

Voltage support device

0XAT7051

to keep ”memory” during 12-V battery replacement, connection to an EOBD socket, cable length: 2.5 m IC index

SEA VS2072

Voltage support device

to keep ”memory” during 12-V battery replacement, connection to a lighter (BOOSTERA) / EOBD socket, cable length: 1.8 m IC index

SEA VS2073

243

BATTERIES SERVICING

Booster 12V/440CA starter start-up current: 440 A, peak current: 1600 A, cable length: 60 cm, weight: 6.5 kg IC index

SONIC MICRO 12V/800CA SPECIAL OFFER professional start-up device for 12-V systems – peak current: 2370 A – starting current: 800 A FOR USE WITH PETROL, DIESEL Diesel engines: up to 250 HP as start-up, up to 250 HP as a power source Petrol engines: up to 350 HP as start-up

48132

IC index

BAT 250 starter

intelligent electronics for 12 V systems start-up current: up to 700 A for engine starting in passenger cars IC index

0 687 000 020

system voltage: 12 V, peak start-up current: 2500 A, start-up current: 850 A, length of start-up cables: 55 cm, weight: 8.7 kg IC index

0XLMP102500

system voltage: 12 V, peak start-up current: 2500 A, start-up current: 850 A, length of start-up cables: 80 cm, weight: 9.8 kg

0XLMP62500

system voltage: 12/24 V, peak start-up current: 2500/5000 A, start-up current: 850/1700 A, length of start-up cables: 150 cm, weight: 32 kg

0XLMP71224V F2

0 687 000 021

P4-2500 Booster

system voltage: 12 V, peak start-up current: 2500 A, start-up current: 850 A, length of start-up cables: 87 cm, weight: 9.5 kg

0XLMP42500

P6-2000 Booster

system voltage: 12 V, peak start-up current: 2000 A, start-up current: 400 A, length of start-up cables: 80 cm, weight: 8.3 kg IC index

P7-1224V F2 Booster

IC index

intelligent electronics for 12 V systems start-up current: up to 1400 A for starting large diesel engines, even at very low temperatures

IC index

P6-2500 Booster

IC index

BAT 251 starter

IC index

P10-2500 Booster

48107

0XLMP62000

SPIN 12/24 JUMP TRUCK Starter

SPECIAL OFFER

start-up current: 300A/12V–400A/24V, peak start-up current: 400A/12V–800A/24V, battery capacity, POWER BANK, weight: 1.5 kg IC index

SPIN 03.020.02

SUBJECT TO STOCK AVAILABILITY

Omega Mechanix Inteligent Jump Starter

for petrol and diesel engines; capacity: 11000 mAh; start-up current: 400 A, peak start-up current: 800 A / 12 V, equipped with a charger for 5V / 2A mobile devices; a set of cables, extra charger IC index

244

STARTER 11000

UltraSTARTER 700 12V

Ultra-condenser battery-free start-up device: lightweight, compact, maintenance-free. Its 700-A peak start-up current ensures fast initiation support for motorcycles, cars, vans and small boats. IC index

USTARTER700

BATTERIES SERVICING

Start-up device

BOOSTER, P23-2000; system voltage: 12 V, peak start-up current: 2000 A, start-up current: 750 A, length of start-up current cables: 80 cm, weight: 8.3 kg IC index

0XLMP232000

Start-up device

BOOSTER, P23-2500; system voltage: 12 V, peak start-up current: 2500 A, start-up current: 850 A, length of start-up current cables: 80 cm, weight: 9.8 kg IC index

0XLMP232500

Start-up device

BOOSTER, P23-3100; system voltage: 12 V, peak start-up current: 3100 A, start-up current: 1170 A, length of start-up current cables: 80 cm, weight: 9.8 kg IC index

0XLMP233100PRO

Start-up device

BOOSTER, P19-3100; system voltage: 12/24 V, peak start-up current: 2500/5000 A, start-up current: 850/1700 A, length of start-up current cables: 50 cm, weight: 22.5 kg IC index

0XLMP193100

Start-up device with no battery provided

BOOSTER, C18-960; system voltage: 12V, peak start-up current: 1500A, Start-up current: 480A, weight: 3.5 kg IC index

0XLMC18960

Start-up device with no battery provided

BOOSTER, C16-1500; system voltage: 12 V, peak start-up current: 4500 A, start-up current: 900 A, weight: 7 kg IC index

0XLMC161500

Start-up device

BOOSTER, P23-2000; system voltage: 12 V, peak start-up current: 2000 A, startup current: 750 A, length of start-up current cables: 80 cm, weight: 8.3 kg, equipped with a P27 docking station IC index

0XLMP232000P27

Start-up device

BOOSTER, P23-2500; system voltage: 12 V, peak start-up current: 2500 A, start-up current: 850 A, length of start-up current cables: 80 cm, weight: 9.8 kg, equipped with a P27 docking station IC index

0XLMP232500P27

Start-up device

BOOSTER, P23-3100; system voltage: 12 V, peak start-up current: 3100 A, start-up current: 1170 A, length of start-up current cables: 80 cm, weight: 9.8 kg, equipped with a P27 docking station IC index

0XLMP233100P27

Start-up device

BOOSTER, P2-1224V; system voltage: 12/24 V, peak start-up current: 5400/2700 A, start-up current: 2400/1200 A, length of start-up current cables: 218 cm, weight: 32.05 kg IC index

0XLMP21224TR

Start-up device with no battery provided

BOOSTER, C10-1800; system voltage: 12V, peak start-up current: 8000A, Start-up current: 1400A, weight: 4.0 kg IC index

0XLMC101800

Start-up device with no battery provided

BOOSTER, C16-3000; system voltage: 12 V, peak start-up current: 9000 A, start-up current: 1800 A, weight: 9.5 kg IC index

0XLMC163000

245

BATTERIES SERVICING

FRONIUS – Intelligent Fronius ACCTIVA battery charging systems

Fronius is the future of protection systems for electronics and power supply in the automotive industry. All products are built using the Active Inverter technology, therefore Fronius supports every type of battery and offers the following options: connection & charging, refreshing, maintenance charging, and a back-up mode. These devices are also equipped with protection systems against reverse wiring, overload and short circuit, ensuring complete safety for the battery as well as for the electronics in the vehicle. The unique Fronius Active Inverter technology combines the advantages of a 50Hz transformer rectifier with modern inverter technology novelties. As a result, Fronius has developed an innovative charging system which can run the analysis itself. The smooth charging process extends battery life by 25%. FRONIUS chargers are authorised by the following brands: BMW, Mini, Rolls Royce, Porsche, Mercedes-Benz, Smart, Audi, VW, Seat, Lamborghini, Bugatti, Skoda, Renault, Hyundai, Vauxhall, MAN, Ducati, KTM.

Acctiva Professional 35A – for the handling of all serviceable batteries

This intelligent battery charging system with an animated user menu on the display is an optimal tool for automotive technicians. Apart from the basic automatic charging feature, this system provides constant voltage during diagnostic works and software updates and ensures that the battery is fully charged upon the completion of service works. IC index

FRO 951

Acctiva Professional Flash 70A – secure programming An electronically safe rectifier with a fast charging function. It provides power also when the vehicle is being diagnosed and reprogrammed. The integrated USB connection guarantees its usefulness in the future: software updates can be carried out quickly and easily. High power: 70 A in the continuous mode. IC index

FRO 4.010.140

Acctiva Seller – power supply in the car showroom

This is a solution for discharged vehicle batteries in car showrooms during the presentation of vehicles. Thanks to the specially designed software, this charger operates without charging and discharging cycles, thus protecting the starter battery. This 30-A device is a reliable power supply for the presentation of models, as well as when providing a new car to the customer. Its compact design and easy handling ensure trouble-free operation. IC index

FRO 950

Acctiva Multicharger

This device enables the simultaneous charging of up to 6 batteries of different types with different charging levels. Each charging circuit can be used for testing and charging. Easy wall mounting. IC index

FRO 4.010.089

It is equipped with two charging circuits and allows for the charging of several batteries of different sizes and voltages. Traction rectifier. An ideal solution for mounting in the vehicle which ensures immediate operational readiness. IC index

Charging current Battery capacity Battery voltage Network voltage Charging characteristics Protection level Dimensions (L x W x H) Weight Emission class of electromagnetic interference (EMC)

246

Acctiva Twin 15A

FRO 953

Acctiva Professional 35

Acctiva Professional Flash 70

Acctiva Seller

Multicharger

35 A at 6 V, 12 V, 24 V 3–350 Ah 6 V / 12 V / 24 V 230 V IUoU / IU IP 40 (horizontally) / IP 44 (vertically) 247 x 162 x 88 mm 2.0 kg B

50 / 70 A 10–250 Ah 12V 230 V (50/60 Hz) no data available no data available no data available no data available A

30 A no data available 12V 230 V (50/60 Hz) UoU phase / IUoU maintenance-mode phase supply IP 40 (horizontally) / IP 44 (vertically) 270 x 168 x 100 mm 2.4 kg B

6A 3–110 Ah 12V 110–230 V (50/60 Hz) IUoU IP 20 584 x 288 x 98 mm 7.75 kg B

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool trolley

5-drawer model equipped with: 157 tool pcs., standard series, dimensions (width/depth/height): 687x459x840mm, central lock, green colour IC index

GCAJ0006 GAAT0802

IC index

GCAJ0005 GBAT0401

GAAT0805

GCAT0701

GCAT1101

GAAT1603

GBAT0402

GCAT2402

GCAT7202

GBAT0303

Tool trolley

7-drawer model equipped with: 261 tool pcs., standard series, dimensions (width/depth/height): 687x459x995mm, central locking, foam pads

GREEN IC index

RED

GE-26105

GVA5004

GVD2803

248

BLACK

IC index

GE-26106

GVC3903

GVC6101

IC index

GE-26109

GVB2503

GVA3002

GVA0807

GVB1202

GVA0405

GVA0406

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

PRO-PLUS tool trolley

STANDARD tool trolley

7-drawer model, equipped with: 227 tools, central locking and drawer locking systems, automatic drawing closure, dimensions (width/depth/ height): 687x459x995 mm

7-drawer model equipped with: 227 tools, central lock, anti-burglar guides, dimensions (width/depth/height): 687x459x995 mm GREEN IC index

GREEN

GCAJ0001

IC index

RED IC index

RED

GCAJ0018

GAAT0702

GAAT1802

GCAT0701

IC index

GAAT1205

GAAT0802

GAAT1603

GBAT0303

GBAT0402

GBAT0401

GAAT1202

GAAT0805

GBAT0501

GAAT0811

GCAT7202

PRO-PLUS tool trolley

7-drawer model, equipped with: 275 tools, central locking and drawer locking systems, self-closing drawers, dimensions (width/depth/height): 687x459x995 mm RED

GCAT1101

STANDARD tool trolley

7-drawer model, equipped with: 275 tools, central locking, anti-burglar guides, dimensions (width/depth/height): 687x459x995 mm RED IC index

GCAJ0033

GCAJ0035

GREEN

GREEN IC index

GCAJ0020

GCAT2402

GCAT0801

IC index

GCAJ0012

IC index

GCAJ0034

GAAT0402

GAAT0802

GAAT0406

GAAT1802

GAAT0407

GCAJ0036

GCAT0801

GCAT2502

GCAT2402

GAAT1603

GAAT0702

GAAT1205

GAAT2302

GCAT0701

GBAT0303

GBAT0402

GBAT0401

GCAT7202

GAAT0805

GBAT0501

GAAT0811

GCAT1101

249

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool trolley

GAAT1301

GAAT0817

GAAT1802

GAAT0802

GAAT6502

GCAT1807

GAAT0805

GAAT0807

GBAT0303

GBAT0402

GBAT0401

GCAT0701

7-drawer model equipped with: 305 tools, PRO-LUS, black colour, chrome finishes, in foam inserts IC index

GCAJ305B

GCAT2001

GCAT2507

GCAT7202

GBAT0501

GAAT0811

GCAT1101

Tool trolley

8-drawer model, equipped with: 322 tools, PRO-PLUS, black colour, chrome finishes, in foam inserts IC index

GED2813

GE-32203

GEA5004

GEB2501

250

GEB2902

GEA0306

GEA1001

GEC3901

GEA0407

GEA0408

GEA0909

GEC6102

GEA1102

GEA0703

GEA3005

GEA0410

GEA0811

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool trolley

8-drawer model equipped with: Jumbo, 360 tools, standard series, dimensions (width/depth/height): 862x498x857, central locking, green colour

GT-36001

IC index

GTA1541 GTA1541 GTA1607

GTB7202

GTA0710 GTA0905 GTA0801

GTB3503

GTB2504

GTB2305

GTA2234 GTA2414 GTA1836

GTA0818 GTC1401

GTA0315 GTA0416 GTA0427

GTA0532 GTA0417 GTA1025

GTA1031 GTA0333

GTC0903 GTC0802

* You can buy an empty Jumbo trolley (index no.: TCBA0801).

Tool trolley with equipment

GVC2604

GVA1017

GVC1202

GVA1103

GVA3002

GVC3903

GVD4602

7 drawers + extension drawer, 367 tools, PRO-PLUS, black-grey colour, width/ depth/height: 746x462x805 mm, foam inserts, central locking IC index

GV-27909+88 GVC6101

GVA5004

GVA0711

GVA0410

GVA0716

GVB2503

GVB1202

GVA0301

GVA0405

GVA0406

GVB0904

GVB0701

251

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool trolley with no equipment, STANDARD 5-drawer model, dimensions (width/depth/height): 687x459x840 mm, central locking GREEN IC index

TCAA0501

RED IC index

TCAA0502

Tool trolley with no equipment, STANDARD 7-drawer model, dimensions (width/depth/height): 687x459x995 mm, central locking GREEN IC index

TCAA0701

RED IC index

TCAA0702

Tool trolley with no equipment, PRO-PLUS

7-drawer model, dimensions (width/depth/height): 687x459x995 mm, central locking GREEN IC index

TCAC0701

RED IC index

TCAC0702

Tool trolley with no equipment, STANDARD 5-drawer model, lockable bottom shelf, (width/depth/height): 687x459x840 mm IC index

252

TCAF0501

SPECIAL OFFER

Tool trolley with no equipment, ECONOMIC 6-drawer model, dimensions (width/depth/height): 681x459x744 mm IC index

TCAJ0601

NEW

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool box

expandable, with accessories, 65 tools. IC index

GCAZ0003

Tool-kit (1/4”)

51 tools in a plastic box IC index

GCAI5102

60 tools, mat finish

GCAI6001

42 tools in a plastic box

GCAI4201

24 pcs.: sockets, 2x extension, sliding wrench, plug socket

GCAI2404

GCAI4601

Tool-kit (1/4”) 24 tools, mat colour, in a plastic box

GCAI2403

Tool-kit (3/8”)

35 tools in a plastic box

GCAI3501

Tool-kit (1/2”)

24 pcs.: ratchet, extensions, reduction adapter, joint, hexagonal sockets IC index

Tool-kit (1/2”) IC index

IC index

Tool-kit (1/2”) IC index

46 tools in a plastic box

IC index

Professional tool-kit (3/8”) IC index

Tool-kit (1/4”)

GCAI2411

Tool-kit (1/4 and 1/2”) 150 pcs. in a plastic box, hexagonal sockets IC index

GCAI150R

253

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit (1/4 and 1/2”) 150 pcs. in a plastic box, dodecagonal sockets IC index

94 pcs. in a plastic box IC index

GCAI150R1

Tool-kit (1/4 and 1/2”) 108 pcs. in a plastic box IC index

Tool-kit (1/4 and 1/2”)

GCAI108R

Tool-kit (1/4 and 1/2”)

96 tools: sockets, flat-ring wrenches, HEX pinned, flat, Philips and Torx types, etc. in a plastic box. IC index

Tool-kit (1/4 and 1/2”)

97 tools: short and long sockets, ratchets, HEX pinned sockets, screwdrivers, Torx screws, pliers, etc. in a plastic box. IC index

80 pcs. in a plastic box

GCAI8002

Tool-kit (1/4”, 3/8”, 1/2”) 130 pcs. in a plastic box IC index

254

GCAI9601

Tool-kit (1/4 and 1/2”) mixed, 82 pcs., hexagonal IC index

GCAI8201

GCAI9701

Tool-kit (1/4 and 1/2”) IC index

GCAI094R

GCAI130B

Tool-kit (1/4 and 1/2”) 106 pcs. in a plastic box IC index

GCAI106B

Tool-kit (3/4”)

17 pcs., in a plastic box: a ratchet, knob, 2 x extensions, hexagonal sockets: 19, 21, 22, 23, 24, 27, 30, 32, 36, 38, 41, 46, 50 mm IC index

GCAI1701

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit (1”)

Flat-ring wrenches

14 pcs, sockets: 36, 41, 46, 50, 55, 60, 65, 70, 75, 80 mm, a ratchet, extension, TRUCK IC index

standard, 16 pcs.: 6–19, 22, 24 mm, in a metal box, tilt: 15 degrees – Hi-Performance

GCAD1403

IC index

Flat-ring wrenches

extra long, 10 pcs.: 10–19 mm, on a hanger, tilt: 15 degrees IC index

extra long, 7 pcs.: 10, 11, 12, 13, 14, 17, 19 mm, on a hanger

GAAF1008

IC index

Ring wrenches

26 pcs., standard, 6–32 mm, in the cover IC index

Flat-ring wrenches

ratchet-type, 10 pcs. 8, 10, 12, 13, 17, 19 mm, 3 adapters for sockets, 1/4” bit holder

with a ratchet, set of 12 pcs.: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, in a metal case

GAAI1004

IC index

Impact sockets

IC index

14 pcs., flat, Philips in a plastic box IC index

58 tools, screwdrivers, bits, knobs, electric probe, in a plastic box

GCAI2701

Screwdriver kit GZC14010

GAAD1205

Screwdriver kit

hexagonal type, 1/2”: 10–19, 21, 22, 23, 24, 27, 30, 32 mm, in a plastic case IC index

GAAA2604

GAAA1204

Flat-ring wrenches IC index

GAAM0706

Flat-ring wrenches

double-sided, 12 pcs.: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 mm, in the cover, tilt: 75 degrees IC index

GAAD1603

Bit kit

GAAI5801

sockets with a pistol knob, 54 pcs.: sockets (1/4”, 4–14 mm), bits (PH0,1,2x2,3, PZ0,1,2,3), flat bits (3, 4, 4.5, 5.5, 6.5, 8 mm), TORX bits (T10, 15, 20, 25, 27, 30, 40), TORX Tamper bits (T10, 15, 20) and ends (SQ1, 2) IC index

Screwdriver kit

replaceable type, 11 pcs. in a plastic box, TORX, PHILIPS, POZIDRIV, HEX IC index

GAAI2101

GAAI5401

255

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Ratchet wrenches 1/2” Index

Range

Length

ANAF1621 ANAF1635 ANAM1610 ANAM1620 ANAM1630

40–210 Nm 70–350 Nm 10–100 Nm 20–200 Nm 60–300 Nm

535 mm 645 mm 405 mm 500 mm 595 mm

Index

Range

Length

ANAC1607 (yellow)

88 Nm

578 mm

ANAC1608 (blue)

108 Nm

578 mm

ANAC1610 (grey)

135 Nm

578 mm

ANAC1612 (white)

163 Nm

578 mm

ANAC1614 (marine)

190 Nm

578 mm

Range

Length

Ratchet wrenches 1/2” (with constant tightening torque)

Ratchet wrenches 3/4” Index ANAF2450 ANAA2470 ANAS2480 ANAA2498

100–500 Nm 140–700 Nm 100–800 Nm 140–980 Nm

865 mm 1092 mm 1000 mm 1230 mm

Ratchet wrenches 1/4” Index

Range

ANAF0803 ANAM0803 ANAS0803

Length

6–30 Nm 1–25 Nm 6–30 Nm

350 mm 290 mm 260 mm

Ratchet wrenches 3/8” Index

Range

ANAF1203 ANAF1211 ANAM1205 ANAS1211

Dynamometric electronic wrenches

256

Length

6–30 Nm 19–110 Nm 5–50 Nm 20–110 Nm

350 mm 385 mm 360 mm 435 mm

SPECIAL OFFER Index

Size

Range

DT-100N DT-200N

3/8” 1/2”

10–100 Nm 20–200 Nm

Length 440 mm 550 mm

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Seven-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 168 professional tools arranged in plastic modules. IC index

9917HQ-GTT168

Seven-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 202 professional tools arranged in plastic modules. IC index

258

9917HQ-GTT202

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Seven-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 297 professional tools arranged in plastic modules. IC index

9917HQ-GTT297

Eight-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 318 professional tools arranged in plastic modules. IC index

9918HQ-GTT318

259

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Eight-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 358 professional tools arranged in plastic modules. IC index

9918HQ-GTT358

Eight-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 450 tools arranged in plastic-foam modules. IC index

260

9918HQ-GTT450

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Eight-drawer tool trolley

with a central locking mechanism and a blockade preventing pulling out more than one drawer. Equipped with a set of 520 tools dedicated for workshops servicing vans and trucks. IC index

9918HQ-GTT520

Ring wrench kit

double-sided type, angled at 45°C, 8 pcs. in a tray IC index

TT-25

1/4” with accessories and pinned wrenches (50 pcs.) in a tray

TT-1

Ring wrench kit

double-sided angled type, 6–22 mm (8 pcs.) in a tray IC index

TT-6

IC index

TT-12

TT-33

Mixed screwdriver kit (8 pcs.) in a tray IC index

TT-10

Ring wrench kit

open-ended type, 8–19 mm (5 pcs.) in a tray IC index

Universal pliers kit (4 pcs.) in a tray

angled type, with a ratchet mechanism (8 pcs.) IC index

Tool-kit IC index

Flat ring wrench kit

TT-8

Knob kit

1/2” with accessories in a tray IC index

TT-3

261

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Flat ring wrench kit 27, 29, 30, 32 mm 4 pcs. in a tray IC index

TT-4B

21–32 mm (4 pcs.), angled type in a tray

TT-11

IC index

Double-sided wrench kit with an articulated socket (6 pcs.) in a tray

TT-9

TT-15F

IC index

with a plastic handle, Torx profile (7 pcs.) in a tray

TT-18

IC index

Angular pinned wrenches with a plastic handle, Allen profile (8 pcs.) in a tray

Screwdriver kit (mixed) 8 pcs. in a tray IC index

262

TT-10U

TT-16

Angular pinned wrenches

Resistant Torx 7 pcs. in a tray

TT-20

TT-15

1/2”, sockets, knobs and accessories (23 pcs.) in a tray

Screwdriver kit

IC index

3/8” sockets plus knobs and accessories (23 pcs.) in a tray

Socket wrench kit

3/8”, sockets plus knobs and accessories (23 pcs.) in a tray

IC index

TT-7

Socket wrench kit IC index

TT-5

Ring wrench kit

for Seger security rings, 4 pcs. in a tray

IC index

6–32 mm (12 pcs.) in a tray IC index

Pliers kit IC index

Flat wrench kit

TT-19

Socket wrench kit

3/8”, sockets, knobs and accessories (38 pcs.) in a tray IC index

TT-38

Tool-kit

tampers, punchers, cutters, hammer, insert for tool trolleys IC index

TT-13

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Screwdriver kit

Torx type, with a hole, 9 pcs. in a box, TH8-TH40 IC index

06450-9TH

Screwdriver kit

9 pcs. flat 3x75, 5.5x100, 6.5x100, 6.5x150, 8x175 Phillips PH0x75, PH1x100, PH2x150, PH3x150. IC index

06301-9MG

Mixed flat screwdriver kit 5.5x100 / 6.5x100 / 6.5x150 / 6.5x38, Phillips PH1x100 / PH2x100 / PH2x150 / PH2x38 and PZ 1x100 IC index

06300-9M

Long impact sockets

1/2” hexagonal 10–24 mm 10 pcs. in a box IC index

84610M

1”, in a box, sizes: 22, 24, 27, 30, 32, 33, 36, 38, 41 mm, TRUCK

for pressing and screwing in brake pistons, 11 pcs. IC index

CWB-11

IC index

06300-9MG

Screwdriver kit

7 pcs. flat 5.5x100, 6.5x100, 6.5x150 Phillips PH1x100, PH2x100, PH2x150, Pozdriv PZ1x100 IC index

06301-7MG

Short impact sockets 1/2” hexagonal 11–22 mm 9 pcs. in a box IC index

84609M

Short impact sockets 1”, for truck wheels, sizes” 27, 30, 32, 23, 36 mm, TRUCK

88605MU

Universal puller for valve springs IC index

88609MU

Tool-kit

Flat 5.5x100, 6.5x100, 6.5x150, 6.5x38 Phillips PH1x100, PH2x100, PH2x150, PH2x38 i PZ1x100

IC index

Short impact sockets IC index

Screwdriver kit (9 pcs.)

UVSC

Puller with a hydraulic cylinder 2–3 arm universal model with a separator IC index

53622

263

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Socket wrench kit

Tool-kit

1/4” 33 pcs. short hexagonal sockets IC index

1/4” 18 pcs. hexagonal sockets IC index

2633MB

Socket wrench kit

40 pcs, 1/4” and 3/8” in metric sizes: 4–19 mm and inch sizes: 3/16”–3/4” IC index

Socket set

hexagonal 3/8”, 40 pcs. and external / internal Torx

5640MA IC index

Socket set

hexagonal 3/8”, 19 pcs. in a metal box

3617M

IC index

Socket wrench kit

1/2” hexagonal 24 pcs. 8–32 mm IC index

4624M

9655M

264

6617-2M

4618M

1/2” dodecagonal 24 pcs. 8–32 mm in a plastic box IC index

3/4” 17pcs., dodecagonal sockets, 19–50mm, TRUCK IC index

1/2” 17 pcs, hexagonal sockets

Socket set

1/4”–3/8”–1/2” 55 pcs.

Tool-kit

3619M

Socket tool-kit IC index

Socket wrench kit IC index

3640T

Socket set

hexagonal 3/8”, 17 pcs. in a metal box IC index

2618M

4624-2MB

Tool-kit

3/4” 17 pcs. hexagonal sockets, 19–50 mm, TRUCK IC index

6617M

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit

89 pcs. 1/4”, 1/2” socket wrenches, flat ring wrenches, socket wrenches in a case IC index

TK-89

Tool-kit

42 pcs. flat wrenches (6–24 mm) and socket wrenches (1/2” 8–32 mm) in a case IC index

TK-42

Socket set

external Torx with a hole (1/4”, 3/8”), 11 pcs. in a box IC index

56025-11C

Pinned wrench attachment kit

1/2” XZN profile 7 pcs. + RIBE 2 pcs. L = 55 mm IC index

46028-9

1/2” RIBE profile, 9 pcs. sized: M5–M14, in a plastic case

46029-9

IC index

1/2” XZN profile 7 pcs. L=100 mm, sizes: M5–M16

TK-124E

Reduction adapter kit 6 pcs. in a box + 2 replaceable tips (1/2”) IC index

9608

Socket set

external Torx (1/4”, 3/8”), 10 pcs. on a slat IC index

56024-10

Pinned wrench attachment kit

1/2” XZN M6–M12 4 pcs. L = 100 mm

46028-4

Pinned wrench attachment kit

1/2” 9 pcs. Allen type, L=100 mm in a plastic box, sizes: M4–M17 IC index

Pinned wrench attachment kit IC index

124 pcs. 1/4”, 1/2” in a case

IC index

Pinned wrench attachment kit IC index

Socket wrench kit

46026-49

HEX bit kit

TORX, XZN, short and long, 40 pcs. + two 1/2” and 3/8” adapters IC index

6040

46028-47

265

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Angular pneumatic wrench 1/2” max. torque: 100 Nm, 160 rpm, weight: 1.3 kg IC index

84120

double-hammer impact mechanism, torque: 542 Nm

84110

max. torque: 2712 Nm, weight: 8.3 kg

88116

max. torque: 814 Nm, weight: 2.5 kg, minimum torque: 40 Nm

angled, with a ratchet mechanism, sizes: 8, 10, 12, 13, 17, 19 IC index

1665F06MB

Flat ring wrench kit

7 pcs. in a retractable case, sizes: 10, 11, 12, 13, 14, 17, 19 mm IC index

16607M

provided in a metal box, sizes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 mm

26 pcs. 6–32 mm IC index

266

16626M

16616MI

Flat ring wrench kit

polished type, 12 pcs. 6–19 mm IC index

166412MB

Flat ring wrench kit

14 pcs. sizes: 10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm IC index

Flat ring wrench kit

84116

Flat ring wrench kit, 16 pcs. IC index

Flat ring wrench kit, 6 pcs.

84117

Angular impact wrench 1/2” IC index

Pneumatic impact wrench 1” IC index

very small size, max. torque: 678 Nm, weight: 1.55 kg IC index

Angular impact wrench 1/2” IC index

Angular impact wrench 1/2”

16614M

Professional hand side riveter for removable rivets, diameters: 2.4–4.8 mm L=255 mm IC index

H1974

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Hand lubricator

CLASSIC model, volume: 400 cc IC index

716

angled blade, size: 0.5x18 mm

5504-18

6 pcs. in the cover: 2x8x115, 3x8x125, 4x9.5x150, 5x9, 5x165, 6x12, 7x180, 8x12, 7x180

punchers and cutters in a handy fabric case

56110-5

Oil filter wrench

three-armed, self-locking type IC index

OFW3-2S

56110-6

Oil filter wrench

universal type, 60â&#x20AC;&#x201C;115 mm, MORS IC index

717

Kit, 5 pcs. IC index

Cylindrical puncher kit IC index

PROFESSIONAL model, volume: 400 cc IC index

Retractable metal cutter IC index

Hand lubricator

1818

Adjustable clamping pliers for oil filters IC index

H1802

Universal puller

max. spacing: 75 mm

two-armed type

IC index

5322-03

IC index

max. spacing: 100 mm IC index

three-armed type

5322-04

5323-03

max. spacing: 100 mm IC index

5323-04

max. spacing: 150 mm IC index

5322-06

Universal puller two-armed type

max. spacing: 80 mm IC index

5312-3

with a glass-fibre handle weight: 300 g weight: 800 g IC index

max. spacing: 120 mm IC index

Fitterâ&#x20AC;&#x2122;s hammer

5312-5

5742F-300

weight: 500 g IC index

5742F-500

IC index

5742F-800

weight: 1000 g IC index

5711F-1000

max. spacing: 200 mm IC index

5312-8 The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

267

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

IC index

Description

2170NM

5–25 Nm 1/4"

3171NM

19–110 Nm 3/8"

4170NM

40–210 Nm 1/2"

4171NM

70–350 Nm 1/2"

6170NM

80–400 Nm 3/4"

IC index

Description

4170GN

40–210 Nm 1/2"

4171GN

70–350 Nm 1/2"

6170GN

100–500 Nm 3/4"

IC index

Description

4170–2GN

40–210 Nm 1/2"

4171–2GN

70–350 Nm 1/2"

IC index

Description

2172G

6–30 Nm 1/4"

3172G

20–100 Nm 3/8"

4172G

40–200 Nm

MODELLING AND CALIBRATION SERVICES FOR DYNAMOMETRIC WRENCHES WITHIN 2–1100 [NM] EVERY WRENCH, JUST LIKE ANY OTHER TOOL, IS SUBJECT TO WEAR AND TEAR. CHECK YOUR WRENCH!

268

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

NEW

LIMITED EDITION

SONIC CORVETTE RACING tool trolley 5 COMPLETE DRAWERS 278 TOOLS IC index

727849

1 109101

2 206601

4 604008

5 602008

3 306102

LIMITED EDITION

4 COMPLETE DRAWERS 88 TOOLS IC index

708821

NEW

1 600930

2 103102

3 203103

4 601708

269

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

S9 trolley in new INTER CARS colours 369 TOOLS

736945

859M

270

LIMITED EDITION

KIT NO. 603003 ZESTAW 603003 FLAT-RING RATCHET WRENCHES PLASKO-OCZKOWE Z GRZECHOTKÄ&#x201E;

1 0 3 5 MM

IC index

532M

1 602407

2 215702

3 309502

4 604002

5 603003

6 602302

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

The latest line of S9 and S12 PERFORMANCE limited trolleys with extra ratchet wrench kit.

Tool trolley

6 COMPLETE DRAWERS, 354 TOOLS THE KIT INCLUDES FLAT-RING RATCHET WRENCHES (6K), 12-PCS IC index

735447

THE KIT (309506) INCLUDES THIN-WALLED IMPACT SOCKETS, 7 TIMES LONGER SERVICE LIFE COMPARED TO THE SERVICE LIFE OF STANDARD SOCKETS

THE KIT (214701) INCLUDES RATCHETS (1/4” and 3/8”) WITH A 360° SWIVEL HANDLE

1 602412

2 214701

3 309506

4 604905

5 601809

6 602107

Tool trolley

6 COMPLETE DRAWERS, 432 TOOLS THE KIT INCLUDES FLAT-RING RATCHET ANGLED WRENCHES (6K), 12-PCS IC index

743248

THE KIT (311601) INCLUDES THIN-WALLED IMPACT SOCKETS, 7 TIMES LONGER SERVICE LIFE COMPARED TO THE SERVICE LIFE OF STANDARD SOCKETS

THE KIT (218503, 311601) INCLUDES RATCHETS (1/4”, 3/8” AND 1/2”) WITH A 360° SWIVEL HANDLE

1 603208

2 218503

3 311601

4 604904

5 602309

6 602711

271

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

7 COMPLETE DRAWERS 485 TOOL PCS. IC index

748529

1 0 3 5 MM

1 603202

1030M

272

532M

2 221201

3 308401

4 605301

5 602204

6 604202

7 604001

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

8 COMPLETE DRAWERS 644 TOOL PCS.

764411

1 0 5 0 MM

IC index

1050M

IC index

635M

764417

1 114602

2 216401

3 311801

4 605301

5 606901

6 602605

7 602803

8 604001

IC index

764418

IC index

764420

273

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

SONIC S12XD The latest S12XD trolley with a set of 714 tools Enlarged S12 trolley with the XD mark. The tool profile tray is 745x575 mm. IC index

771446

1 114101

2 221801

3 314901

4 607201

5 603402

6 604402

7 601806

601807

667 653 324

1026 1014

858 1034.5

181

430

274

602007

740 X 575MM

1/3

190 X 370MM

1/3

190 X 370MM

1/3

190 X 370MM

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

S14 and S15 tool trolleys

NEW

12 complete drawers with set of 958 tools Trolley S15 has deeper drawers. Profiled trays will be supplemented with special filling in order to elevate the drawer.

S14

S15

IC index

795808

IC index

795844

1L 604501

1R 601808

47612*

2L 221801

2R 116901

47612*

3L 314901

3R 306402

47612*

4L 607201

4R 605001

47612*

5R 303902

47612*

6L 603402

5L 604402

602007

7L 601806

601807

Set 221801 includes dynamometric wrench 732210100, 20-100 Nm

Set 607201 includes flat-ring ratchet wrenches

Set 314901 includes impact sockets for car wheels, Â˝â&#x20AC;?, 3 pcs.

Set 314901 includes dynamometric wrench 732380400, 80-400 Nm

275

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

140 TOOL PCS.

NEW

MAIN FEATURES 6 DRAWERS MAIN FEATURES 4 SHALLOW DRAWERS (575 X 385 X 60 MM) 2 DEEP DRAWERS (575 X 385 X 137 MM) POWDER-PAINTED CENTRAL LOCK ADJUSTABLE WRENCH SHELF FOR CANS ABS PLASTIC TOP RUBBER WHEELS (Ø 100–30 MM), 2X ROTATING WHEELS WITH BRAKE AND 2X FIXED WHEELS TOTAL WEIGHT: 48 KG DRAWER LOAD CAPACITY: 40 KG IC index

9 1 1 MM

3 COMPLETE DRAWERS

735M

467M

1 106105

714040

2 206501

Empty trolley IC index

276

4733716

3 601404

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

3 COMPLETE DRAWERS

4 COMPLETE DRAWERS

IC index

720606

887M

575M

IC index

1050MM

285 TOOLS

1050MM

206 TOOLS

728406

887M

575M

1 112102

2 310101 1 602904

3 604002

2 316001

‘EVA’ PLASTIC WORKTOP

CENTRAL LOCK

4 602302

3 601707

SIDE POCKET FOR CANS

8 COMPLETE DRAWERS

HEAVY DUTY

460 TOOLS

IC index

1050MM

BALL BEARINGS

746009

IC index

746015

IC index

887M

575M

746016

112102

310101

603002

604702

307302

403201

403301

602302

277

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

BUILD YOUR OWN UNIQUE TOOL TROLLEY Index numbers of trolleys without tools: IC index

4733716

IC index

4732718

IC index

4730167

IC index

47308113

IC index

4732418

IC index

47307118

IC index

4730918

IC index

47338114

IC index

4731118

IC index

4732210

WYTŁOCZKI DOPASOWANE DO FOAM TRAYS MATCHED TO DRAWERS SZUFLAD W WÓZKACH: S8,S9, S9,S10, IN THE FOLLOWING TROLEYS:S7, S7, S8, S10GLASS, GLASS, S13, S14, S15, MSSMSS S10, S10 S13, S14, S15,

1/3 190 X 370 MM

278

1/3

FOAM TRAYS MATCHED TO DRAWERS WYTŁOCZKI DOPASOWANE DO IN THE FOLLOWING TROLEYS: S7,S8, S8, S9, S9, S10, S7, SZUFLAD W WÓZKACH S10 GLASS, S13, S14, S15, MSS S10, S10 GLASS, S13, S14, S15, MSS

FOAM TRAYS MATCHED TO DRAWERS WYTŁOCZKI DOPASOWANE DO IN THE FOLLOWING S11, S12, S14, S15, MSS S11, S12, SZUFLAD TROLEYS: W WÓZKACH:

S14, S15, MSS

1/3

190 X 370 MM

575 X 370 MM

740 X 435 MM

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit (1/4”) 61 pcs. in an SFS 190x370mm foam tray IC index

106303

in an SFS 190x370mm foam tray

201401

in an SFS 190x370mm foam tray

300908

in an SFS 190x370mm foam tray IC index

302003

in an SFS 190x370mm foam tray

303805

in an SFS 190x370mm IC index

600430

in an SFS 190x370mm foam tray

600614

in an SFS 190x370mm foam tray IC index

in an SFS 190x370mm foam tray

302104

Hammer kit (3 pcs.)

in an SFS 190x370mm foam tray

600319

Pliers kit (4 pcs.)

in an SFS 190x370mm foam tray

600432

TORX wrenches with a handle (7 pcs.) in an SFS 190x370mm foam tray IC index

Pinned socket wrench kit (7 pcs.)

301603

Pinned socket kit (1/2”) 21 pcs.

IC index

Pliers kit with a calliper (6 pcs.) IC index

in an SFS 190x370mm foam tray

IC index

Pliers kit (4 pcs.)

208001SON

Impact socket kit (1/2”) 16 pcs.

IC index

Socket kit (1/2”) 38 pcs. IC index

in an SFS 190x370mm foam tray

IC index

Deep socket kit (1/2”) 20 pcs.

110201

Socket kit (3/8”) 80 pcs. IC index

Tool-kit (1/2”) 9 pcs. IC index

in an SFS 190x370mm foam tray IC index

Tool-kit (3/8”) 14 pcs. IC index

Tool-kit (1/4”) 103 pcs.

600719

HEX socket wrenches with a handle (7 pcs.) in an SFS 190x370mm foam tray IC index

600717

600708

279

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

HEX wrenches with a handle (7 pcs.) in an SFS 190x370mm foam tray IC index

600718

in an SFS 190x370mm foam tray

600823

in an SFS 190x370mm foam tray

600825

in an SFS 190x370mm foam tray IC index

601016

for brake hoses, 10 pcs. in an SFS 190x370mm foam tray

601017

Angled (75Â°) ring wrench kit in an SFS 190x370mm foam tray IC index

601225

with a ratchet, dodecagonal type, 12 pcs. in an SFS 190x370mm foam tray IC index

601228

in an SFS 190x370mm foam tray

280

600709

600826

Wrench kit

for oil drain plugs, universal strap wrench for filters in an SFS 190x370mm foam tray

602205

Piped socket wrenches (11 pcs.) in an SFS 190x370mm foam tray IC index

601103

Puncher and cutter kit (12 pcs.) in an SFS 190x370mm foam tray

601227

Flat ring wrench kit

with an angled ratchet, dodecagonal type, 12 pcs. in an SFS 190x370mm foam tray IC index

Flat ring wrench kit, 7 pcs. IC index

in an SFS 190x370mm foam tray

IC index

Flat ring wrench kit

600824

VDE screwdriver kit (8 pcs.)

IC index

Open wrench kit IC index

in an SFS 190x370mm foam tray

IC index

Flat wrench kit (10 pcs.)

600822

Torx screwdriver kit (8 pcs.) IC index

Pliers kit (8 pcs.) IC index

in an SFS 190x370mm foam tray IC index

Screwdriver kit (8 pcs.) IC index

Lever kit (8 pcs.)

601230

Flat ring wrench kit, 19 pcs. in an SFS 190x370mm foam tray IC index

601903

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit

sockets and pinned sockets with knobs and accessories (3/8”+ 1/2”), 101 pcs. in an SFS 575x370mm foam tray IC index

310101

screwdrivers and accessories 121 pcs. in an SFS 575x370mm foam tray

112102

Tool-kit (1/4” + 3/8”)

157 pcs. in an SFS 575x370mm foam tray IC index

215702

61 pcs. in an SFS 575x370mm foam tray

306101SON

95 pcs. in an SFS 575x370mm foam tray IC index

105 pcs. in an SFS 575x370mm foam tray IC index

310501

142 pcs. in an SFS 575x370mm foam tray

73 pcs. in an SFS 575x370mm foam tray IC index

307302

Tool-kit

in an SFS 575x370mm foam tray

IC index

602103

213901

Wrench kit (41 pcs.) flat, flat-ring, ring angled (75º) and ring cut types, in an SFS 575x370mm foam tray

604101

Impact socket kit (3/4”)

33 pcs. in an SFS 575x370mm foam tray IC index

for tampering with hammers, a crowbar, wedge, 21 pcs. in an SFS 575x370mm foam tray

214201

Tool-kit (1/4” and 3/8”)

IC index

Impact socket kit (3/8” and 1/2”)

309502

Tool-kit (1/4” and 3/8”)

IC index

Tool-kit (1/2”)

316001

Tool-kit (1/2”)

IC index

Tool-kit (1/2”) IC index

sockets, pinned sockets, pins with knobs and pinned wrenches (1/4”, 3/8” and 1/2”), 160 pcs. in an SFS 575x370mm foam tray IC index

Tool-kit (1/4”) IC index

Tool-kit

403301

Metric and SAE tool-kit 32 pcs. 3/4” in an SFS 575x370mm foam tray IC index

403201

281

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Wrench kit

flat, flat-ring and ring angled (75º), 40 pcs. in an SFS 575x370mm foam tray IC index

flat-ring type, 30 pcs. 6–38 mm in an SFS 575x370mm foam tray

604002

IC index

Wrench kit

flat-ring, flat, ring-angled (75º), injection pump wrench (13 mm) and flexible ring-cut wrench 37 pcs. in an SFS 575x370mm foam tray IC index

603701

Wrench kit

socket, E-TORX, socket ratchet, ring cut types, 30 pcs. in an SFS 575x370mm foam tray IC index

603003

flat, PH, PZ, TX type, and HEX TX wrenches, 41 pcs. in an SFS 575x370mm foam tray IC index

604102

Tool-kit

pliers, files, calliper, ruler, cutter with replaceable blades, 18 pcs. in an SFS 575x370mm foam tray IC index

601802

282

Wrench kit

with a handle, 21 pcs., Allen, socket types, in an SFS 575x370mm foam tray

602104

Screwdriver kit

flat, PH, TORX type, 28 pcs. in an SFS 575x370mm foam tray IC index

602407

Tool-kit

pliers, 12 pcs. in an SFS 575x370mm foam tray

IC index

602304

602302SON

604702

601207

for tampering with hammers, files, ruler, 12 pcs. in an SFS 575x370mm foam tray

hammers, pliers, punchers, 23 pcs. in an SFS 575x370mm foam tray IC index

IC index

Tool-kit

for tampering with hammers, pliers, 23 pcs. in an SFS 575x370mm foam tray

Tool-kit

ring cut, socket, ring ratchet, ring flat, ring U-bent, flat-ring types, in an SFS 575x370mm foam tray

IC index

Tool-kit

IC index

Wrench kit

IC index

Screwdriver kit

603002

601707

Cutter and hammer kit

16 pcs. in an SFS 575x370mm foam tray IC index

601601

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit (1/4”) 146 pcs. in an SFS 740x435mm tray IC index

114602

in an SFS 740x435mm tray

221201

in an SFS 740x435mm tray

311801

in an SFS 740x435mm tray IC index

602204

socket T screwdrivers, pinned wrenches, files and hooks in an SFS 740x435mm tray

602803

Tool-kit

impact sockets, hammers and tampers in an SFS 740x435mm tray IC index

604001

socket, flat-ring, dodecagonal ring with a ratchet, ring bent (75°) types, in an SFS 740x435mm tray IC index

315601

Set of pliers and cutting tools 29 pcs. in an SFS 740x435mm tray

602605SON

Tool-kit

screwdrivers, cutters and scrapers, 32 pcs. in an SFS 740x435mm tray IC index

603202

Tool-kit

ring open, flat, ring bent wrenches, 45 pcs. in an SFS 740x435mm tray

604801

HEX wrenches with handle (42 pcs.) in an SFS 740x435mm tray IC index

604202

605301

Wrench kit

ring cut, double-side flat, ring ratchet (4-in-1), ring, U-bent, E-TORX, pinned, extra long HEX and TORX types in an SFS 740x435mm tray IC index

in an SFS 740x435mm tray

IC index

Wrench kit

308401

Tool-kit (1/4”, 3/8”, 1/2”) 156 pcs.

IC index

Tool-kit IC index

in an SFS 740x435mm tray

IC index

Set of cutting tools and pliers 22 pcs.

216401

Tool-kit (1/2”) 84 pcs. IC index

Tool-kit (1/2”) 118 pcs. IC index

in an SFS 740x435mm tray IC index

Tool-kit (1/4” and 3/8”) 212 pcs. IC index

Tool-kit (3/8”) 164 pcs.

606901

Tool-kit

impact sockets, hammers and tampers, 31 pcs. in an SFS 740x435mm tray IC index

603102

283

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kits in the latest BMCS trays and cases

Tool-kit, mixed 1/4”, 3/8”, 1/2”, 99 pcs. in a case and a BMCS tray IC index

309901

Tool-kit, mixed 1/2”, 1/4”, 91 pcs. in a case and a BMCS tray IC index

309101

Tool-kit, mixed 1/2”, 45 pcs.

in a case and a BMCS tray IC index

284

304501

Tool-kit, mixed 1/4”, 1/2” 94 pcs. in a case and a BMCS tray IC index

309402

Tool-kit, mixed 1/2”, 1/4”, 76 pcs. in a case and a BMCS tray IC index

307603

Tool-kit, mixed 1/2”, 24 pcs.

in a case and a BMCS tray IC index

302404

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool-kit (3/8”) 76 pcs. in a case and a BMCS tray IC index

207601

in a case and a BMCS tray

203703

in a case and a BMCS tray

107403

in a case and a BMCS tray IC index

104001

in a case and a BMCS tray

202803

Tool-kit (1/4”) 46 pcs. in a case and a BMCS tray IC index

Tool-kit (1/4”) 40 pcs.

204003

Tool-kit (3/8”) 28 pcs. IC index

Tool-kit (1/4”) 74 pcs. IC index

in a case and a BMCS tray IC index

Tool-kit (3/8”) 37 pcs. IC index

Tool-kit (3/8”) 40 pcs.

104602

Tool-kit (1/4”) 35 pcs. in a case and a BMCS tray IC index

103502

285

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Work efficiently Work with SONIC

Quick-release button

Rotatable handle

Standard 360º rotation

NEW RATCHETS WITH A ROTATABLE HANDLE NEW

Ratchet 1/4”

teeth: 52, length: 165 mm, 360° rotatable handle IC index

7121101

flat-ring wrenches, 6–32 mm IC index

602603SON

flat-ring wrenches, bent type with a ratchet, hexagonal type

601210

IC index

286

402001

Ratchet 1/2” 7121103

Wrench kit, 14 pcs. flat-ring wrenches, 6–22 mm

601401

Wrench kit, 12 pcs.

flat-ring wrenches with a ratchet, dodecagonal type

601218

Flat ring wrench kit in a bag, 6–22 mm IC index

NEW

teeth: 52, length: 277 mm, 360° rotatable handle IC index

IC index

20 pcs. 3/4” socket kit dodecagonal type

7121102

IC index

Wrench kit, 12 pcs. IC index

teeth: 52, length: 232 mm, 360° rotatable handle IC index

Wrench kit, 26 pcs.

NEW

Ratchet 3/8”

601702

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Screwdriver kit

mixed types, 20 pcs. IC index

602006

IC index

Screwdriver kit mixed types, 5 pcs. IC index

600503

pinned TORX XZN impact M14–M16–M18, 3x43mm, 3x78mm sockets

300601

IC index

for operating electrical systems with 7 replaceable heads IC index

3310417

(4 pcs.)

600439

Pinned TORX XZN socket kit 1/2”, 8 pcs. in a case IC index

Tool-kit, 91 pcs.

300805

1/4”, 1/2”, screwdrivers, pliers, hammer, ruler, pinned HEX wrenches IC index

709101

Mobile wheeled case, 132 pcs. 1/4”, 1/2”, screwdrivers, pliers, wire cutters, parting and pointing tools, hammer, ruler, lamp, gripper, pinned HEX and TORX wrenches, flat ring wrenches IC index

for 1/2” wheels, hexagonal type, 17 mm, for Mercedes-Benz W221 S-Class, CL-Class and Maybach (OEM: 000 990 5407)

304201

Set of hooks IC index

813001

713201

Special-purpose socket

IC index

Special-purpose pliers

300401SON

1/4”, 1/2”, screwdrivers, pliers, wire cutters, parting and pointing tools, hammer, ruler, lamp, gripper, pinned HEX and TORX wrenches, flat ring wrenches

in a metal box (42 pcs.)

813003

torque limiting feature, 1/2”, 4 pcs.

Tool-kit, 132 pcs.

Bit kit

for electric wires (0.2–6.0 mm)

Torsional extension kit IC index

600603

Pliers IC index

Socket set IC index

impact type, 6 pcs.

Adapter kit

impact reduction adapters, 6 pcs. 1/4” to 3/8”, 3/8” to 1/4”, 3/8” to 1/2”, 1/2” to 3/8”, 1/2” to 3/4”, 3/4” to 1/2” IC index

300605

713202

Adapter kit

impact reduction adapters, 6 pcs. 1/4” to 3/8”, 3/8” to 1/4”, 3/8” to 1/2”, 1/2” to 3/8”, 1/2” to 3/4”, 3/4” to 1/2” IC index

300603

287

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

STAR-HEAD SCREWDRIVER (PH)

STAR-HEAD SCREWDRIVER (PZ)

DIN NO. ISO 8764-1 + 8764-2 INDEX 1311S 1312S

SIZE PH.1 PH.2

L1(MM) 38 38

L(MM) 104 104

FLAT SCREWDRIVER

SIZE 3 3.5 4 5.5 6.5 8

L1(MM) 75 100 100 125 150 175

L(MM) 167 192 192 228 265 299

INDEX 13605 13606 13607 13608 13609 13610 13615 13620 13625 13627 13630 13640 13645

G 20 24 28 72 104 164

SIZE T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45

STAR-HEAD SCREWDRIVER (PH) SIZE PH.0 PH.1 PH.2 PH.3

L1(MM) 60 80 100 150

L(MM) 152 183 215 274

1/4” 6x SOCKET

SIZE 3 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14

L(MM) 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

288

L (MM) 167 167 167 167 167 203 203 203 215 215 215 215 224

D2(MM) 6.0 6.8 7.2 7.8 8.4 9.3 11.0 12.0 13.0 15.0 16.0 17.0 18.0 19.0

G 10 10 10 10 10 10 12 10 12 12 16 18 18 26

L(MM) 152 183 215 274

G 22 64 96 158

DIN NO. ISO 2380-1 + 2380-2

N.W. (G) 24 24 24 24 26 64 66 68 94 94 94 102 136

ART. NO. 13625015 13625020 13625025 13625030 13625045

G 20 62 94 156

INDEX 133055S 133065S

SIZE 5.5 6.5

L1(MM) 38 38

L(MM) 104 104

G 44 48

ELASTIC HEX SCREWDRIVER INDEX 47536 47537 47538

SIZE 15 20 25 30 45

SIZE 6 7 8

L1(MM) 150 150 150

L(MM) 274 274 274

G 151 151 151

L1(MM) 250 250 250 250 250

L(MM) 353 353 365 365 365

G 94 94 132 132 184

3/8” 6x SOCKET

DIN NO. 3120

3/8” 6x DEEP SOCKET DIN NO. 3120/3124

L1 (MM) 75 75 75 75 75 100 100 100 100 100 100 100 100

L1(MM) 60 80 100 150

FLAT SCREWDRIVER

1/4” 12x DEEP SOCKET

DIN NO. 3120/3124

INDEX 21503 21504 21545 21505 21555 21506 21507 21508 21509 21510 21511 21512 21513 21514

SIZE PZ.0 PZ.1 PZ.2 PZ.3

TORX TX SCREWDRIVER

DIN NO. ISO 8764-1 + 8764-2 INDEX 1310 1311 1312 1313

INDEX 1320 1321 1322 1323

G 44 48

TORX TX SCREWDRIVER

DIN NO. ISO 2380-1 + 2380-2

INDEX 13303 13335 13304 13355 13365 13308

DIN NO. ISO 8764-1 + 8764-2

DIN NO. 3120/3124

INDEX 2185004 21850045 2185005 21850055 2185006 2185007 2185008 2185009 2185010 2185011 2185012 2185013

SIZE 4 4.5 5 5.5 6 7 8 9 10 11 12 13

L(MM) 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

D2(MM) 6.8 7.2 7.8 8.4 9.3 11.0 12.0 13.0 15.0 16.0 17.0 18.0

G 16 16 16 14 18 22 22 28 32 38 42 46

INDEX 22506 22507 22508 22509 22510 22511 22512 22513 22514 22515 22516 22517 22518 22519 22520 22521 22522 22524

SIZE 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

L(MM) 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 30.0 30.0 30.0 30.0 30.0 32.0 32,0

D2(MM) 9.3 10.6 11.8 13.2 14.5 15.7 17.0 18.0 20.0 22.0 22.0 24.0 26.0 26.0 28.0 28.0 30.0 32,0

G 20 22 22 22 22 24 22 24 28 34 32 40 42 46 60 50 60 62

INDEX 2256306 2256307 2256308 2256309 2256310 2256311 2256312 2256313 2256314 2256315

SIZE 6 7 8 9 10 11 12 13 14 15

L(MM) 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0

D2(MM) 9.3 10.6 11.8 13.2 14.5 15.7 18.0 19.0 20.0 22.0

G 34 36 34 44 46 50 62 68 74 96

INDEX 2256316 2256317 2256318 2256319 2256320 2256321 2256322

SIZE 16 17 18 19 20 21 22

L(MM) 63.0 63.0 63.0 63.0 63.0 63.0 63.0

D2(MM) 22.0 24.0 26.0 26.0 28.0 28.0 30.0

G 82 106 130 116 148 126 160

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

1/2” 6x SOCKET

1/2” 6x SOCKET, DEEP

DIN NO. 3120/3124

INDEX

SIZE

23508 23509 23510 23511 23512 23513 23514 23515 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23532

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

L (MM) 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 42.0 42.0 42.0 43.0 43.0 43.0 43.0

D2 (MM) 12.2 13.5 15.0 16.3 17.6 18.8 20.4 21.0 22.0 24.0 26.0 26.0 28.0 28.0 30.0 32.0 32.0 34.0 36.0 36.0 38.0 38.0 40.0 42.0

INDEX

SIZE

46 48 48 50 50 52 54 52 48 60 70 58 70 60 88 98 90 118 142 136 154 134 158 168

2357708 2357709 2357710 2357711 2357712 2357713 2357714 2357715 2357716 2357717 2357718 2357719 2357720 2357721 2357722 2357723 2357724 2357725 2357726 2357727 2357728 2357729 2357730 2357732

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

FLAT OPEN WRENCH

SIZE

L (MM)

4140607 4140809 4141011 4141213 4141415 4141617 4141819 4142022 4142123 4142224 4142427 4142528 4143032 4143436

6X7 8X9 10X11 12X13 14X15 16X17 18X19 20X22 21X23 22X24 24X27 25X28 30X32 34X36

123 140 156 172 190 204 221 237 247 247 263 279 298 350

B1 (MM) 15.5 20.4 23.6 28.2 33.3 36.1 39.2 45.4 45.2 46.8 51.9 53.8 64.4 69.8

B2 (MM) 18.0 22.7 25.7 30.3 35.3 37.9 41.5 49.5 48.5 50.8 58.1 60.3 68.8 76.0

L (MM)

4110810 4111113 4111214 4111618 4111719 4111922 4112427 4113032

8X10 11X13 12X14 16X18 17X19 19X22 24X27 30X32

145 165 178 196 210 233 265 285

B1 (MM) 18.4 22.6 25.0 30.0 30.0 32.5 41.0 48.5

INDEX

SIZE

L (MM)

70 74 66 78 82 96 104 98 100 130 154 142 168 152 204 228 218 254 300 286 320 300 346 364

41506 41507 41508 41509 41510 41511 41512 41513 41514 41515 41516 41517 41518 41519 41520 41521 41522 41523 41524 41525 41526 41527 41528 41529 41530 41532

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

105 115 125 135 145 155 165 175 185 195 205 215 225 235 245 255 265 275 285 295 305 315 325 335 345 365

SIZE

L (MM)

22 32 58 80 98 134 158 212 232 225 314 386 486 600

4170208 4170209 4170210 4170211 4170212 4170213 4170214 4170215 4170216 4170217 4170218 4170219

8 9 10 11 12 13 14 15 16 17 18 19

136 143 159 168 174 180 189 200 216 232 239 247

SIZE

L (MM)

4190607 4190809 4191011 4191213 4191415 4191617 4191819 4192022 4192122 4192123 4192326 4192427 4192528 4193032 4193436

6X7 8X9 10X11 12X13 14X15 16X17 18X19 20X22 21X22 21X23 23X26 24X27 25X28 30X32 34X36

168 183 198 217 239 260 292 318 318 330 345 345 355 370 415

B1 (MM) 10.7 13.6 16.6 19.5 22.4 25.3 26.9 34.0 31.1 34.0 36.9 36.9 40.4 45.5 48.5

B2 (MM) 12.2 15.1 18.0 20.9 23.7 26.7 28.7 31.1 35.9 35.9 41.4 41.4 43.8 48.5 54.5

G 52 56 94 122 164 196 260 320 382 344 490 498 546 632 1000

LONG PLIERS 8”

G 52 90 130 136 188 240 346 482

INDEX 4321200

L(MM) 205

14 20 30 32 38 50 66 70 84 94 108 128 148 160 178 210 250 254 328 314 348 380 430 436 530 570

B2 (MM) 17.6 19.1 20.7 22.7 24.0 26.1 27.8 29.2 31.6 33.5 33.7 35.1

36 44 58 70 84 100 116 140 158 200 202 250

B1 (MM) 16.7 19.4 21.5 23.9 26.0 27.3 31.2 32.5 34.1 37.5 39.0 40.7

UNIVERSAL PLIERS 7”

(made in Germany)

B2 (MM) 20.8 25.0 27.4 27.4 32.5 38.0 45.0 51.0

B2 (MM) 10.1 11.5 12.8 14.2 15.6 16.9 18.3 19.7 21.2 22.5 24.0 25.3 26.8 28.1 29.7 31.3 32.6 34.2 35.5 36.9 38.2 39.6 40.9 42.3 43.7 46.4

RATCHET 12x

INDEX

B1 (MM) 15.5 17.0 19.2 21.2 23.2 25.3 27.2 29.4 31.5 33.2 34.7 36.5 38.7 40.7 43.1 44.8 46.9 48.3 50.4 52.0 53.6 55.7 57.6 58.3 61.8 65.8

FLAT RING WRENCH

DIN NO. 3118

SIZE

D2 (MM) 12.2 13.5 15.0 16.3 17.6 18.8 20.4 21.0 22.0 24.0 26.0 26.0 28.0 28.0 30.0 32.0 32.0 34.0 36.0 36.0 38.0 38.0 40.0 42.0

DIN NO. 838

FLAT OPEN WRENCH

INDEX

L (MM) 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0 77.0

DIN NO. 3113

RING ANGLED (75°) WRENCH

DIN NO. 3110

INDEX

FLAT RING WRENCH

DIN NO. 3120/3124

G 218

UNIVERSAL PLIERS 6”

INDEX 4311175

L(MM) 185

G 302

LONG PLIERS 6”

(made in Germany)

WRENCHES UP TO 85 MM ARE AVAILABLE IN OUR OFFER INDEX 4311165

L(MM) 165

G 190

INDEX 4321170

L(MM) 170

G 156

289

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

SIDE CUTTING PLIERS 8”

ADJUSTABLE PLIERS 10” (made in Germany)

AUTOMATIC PLIERS

(made in Germany)

FOR FOR STRIPPING ISOLATION 0.5–4 MM (made in Germany)

INDEX 4342200

L(MM) 200

G 340

INDEX 4471180

PLIERS FOR RINGS

L(MM) 178

G 150

INDEX 43614

L(MM) 167

G 150

INDEX

SIZE

7120901 7120902 7120903

1/4” 3/8” 1/2”

L (MM) 140 195 255

T (MM) 23 30 37

SIZE

7110101 7110102 711013300 711013440

1/4” 3/8” 1/2” 1/2”

L (MM) 133 265 300 440

T (MM) 23 30 37 37

D (MM) 26 33 43 43

G 142 418 724 932

G 150

INDEX 43611

L(MM) 140 160 170 190 220

G 60 96 116 196 350

L(MM) 140 150 180 200 210 220 220

G 50 54 88 102 182 176 350

PUNCHER INDEX 4532140 4533150 4534180 4535200 4536210 4538220 45124220

SIZE

7120701 7120702 7120703

1/4” 3/8” 1/2”

L (MM) 145 195 248

T (MM) 24 30 38

L(MM) 178

G 150

FLAT RATCHET, 72 TEETH D (MM) 26 33 43

G 122 298 590

INDEX 7110301 7110302

SIZE 1/4” 3/8”

T(MM) 25 28

D(MM) 49 49

G 50 58

RATCHET

WITH A ROTATABLE HEAD, 72 TEETH

D (MM) 26 30 38

INDEX

SIZE

112 212 456

7110201 7110202 7110203

1/4” 3/8” 1/2”

L (MM) 150 235 305

T (MM) 24 34 40

D (MM) 32 44 49

G 130 385 652

TORQUE WRENCH

CUT-OFF TOOL INDEX 45110141 45112160 45116170 45118190 45124220

INDEX

G 145 322 580 1305

(STRAIGHT, OPEN)

ARTICULATED RATCHET, 45 TEETH RATCHET, 72 TEETH

INDEX

L(MM) 180 250 300 400

PLIERS FOR RINGS

RATCHET, 45 TEETH

(BENT, OPENED) (made in Germany)

L(MM) 167

INDEX 4351180 4351250 4351300 4351400

(BENT, CLOSED) (made in Germany)

PLIERS FOR RINGS

INDEX 43613

G 130

PLIERS FOR RINGS

(STRAIGHT, CLOSED) (made in Germany)

INDEX 43612

L(MM) 180

INDEX

SIZE

73210525 73220550 732210100 732310100 732320200 732360300 732380400 73241000 7324550 7324750 73251000 7325750

1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

5–25 5–50 10–100 10–100 20–200 60–300 80–400 200–1000 110–550 150–750 200–1000 150–750

MALLET, 400 G

D (MM) 26 40.5 40.5 40.5 40.5 40.5 40.5 63.0 63.0 63.0 63.0 63.0

T (MM) 22 37 37 40 40 40 40 63 58 58 63 58

L (MM) 290 360 405 405 500 595 680 1250 970 1150 1250 1150

HAMMER, 1000 G

WITH A TPR RUBBER-COVERED HANDLE

HAMMER, 200 G

WITH A TPR RUBBER-COVERED HANDLE

INDEX 4611200

290

L(MM) 287

G 322

INDEX 4620400

L(MM) 290

G 488

INDEX 4631000

L(MM) 278

G 1334

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Steel vice

jaw width: 100 mm, HEAVY-DUTY IC index

Steel vice

IC index

Steel vice IC index

jaw width: 100 mm,

BS-10305

jaw width: 200 mm, HEAVY-DUTY

BS-10306

Cast-iron vice IC index

jaw width: 125 mm, HEAVY-DUTY

BS-10304

jaw width: 150 mm, HEAVY-DUTY IC index

Steel vice

BS-10308

Cast-iron vice jaw width: 100 mm,

BS-10704

IC index

BS-10705

Steel vice IC index

jaw width: 150 mm IC index

Cast-iron vice jaw width: 200 mm

BS-10706

IC index

BS-10708

rotary base, jaw width: 125 mm, HEAVY-DUTY

BS-10324

IC index

Steel vice IC index

rotary base, jaw width: 200 mm, HEAVY-DUTY

BS-10326

IC index

Cast-iron vice

BS-10328

Cast-iron vice

rotary base, jaw width: 100 mm, HEAVY-DUTY

rotary base, jaw width: 125 mm, HEAVY-DUTY

BS-10724

IC index

Cast-iron vice

BS-10725

Cast-iron vice

rotary base, jaw width: 150 mm, HEAVY-DUTY IC index

BS-10325

Steel vice

rotary base, jaw width: 150 mm, HEAVY-DUTY

IC index

Cast-iron vice

Steel vice

rotary base, jaw width: 100 mm, HEAVY-DUTY

rotary base, jaw width: 200 mm, HEAVY-DUTY

BS-10726

IC index

BS-10728

Panel floors See the full offer

Floor tile

Eco Diamond – Recycling, grey colour, high load capacity, tile size: 510 x 510 mm IC index

Ramp

panel floor corner, Diamond structure, black colour, tile size: 510 x 140 mm IC index

FORTELOCK2015 BLACK

FORTELOCK2010 ECOGREY

Ramp

panel floor corner, Diamond structure, grey colour, tile size: 510 x 140 mm IC index

FORTELOCK2015 GREY

Floor tile

Eco Diamond structure, red colour, high load capacity, tile size: 510 x 510 mm IC index

FORTELOCK2010 ROSSO RED

Floor tile

Eco Diamond – Recycling structure, black colour, high load capacity, tile size: 510 x 510 mm IC index

FORTELOCK2010 ECOBLACK

Floor tile

Eco Diamond structure, black colour, high load capacity, tile size: 510 x 510 mm IC index

FORTELOCK2010 BLACK 291

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

WRENCHES

Indexes: TOPTUL, HANS, SONIC Flat wrench

AAEJ, 1151M, 414, 422

Flat-ring wrench

AAEB, 1161M, 415, 426

Flat-ring ratchet wrench

AOAF, 1165M, 41701, 41704

Flat-ring ratchet wrench

ABAF, 1166, 41702

Flat-ring ratchet angled wrench

AOAD, 1165FM, 41703, 41706

Ring, ratchet, double-sided, angled wrench

AOAE, 11055M

Ring bent wrench

AAEI, 1103M, 4191, 4192

Flat-socket articulated wrench

AEEB, 1141M

Socket articulated wrench

AEEC, 1142M, 4120

Ring TORX E wrench

AAEE, 1110, 416

Ring, ratchet, double-sided, TORX E wrench

AOAC, 1115E, 4176

Loop-through socket wrench

AEAE, 1477, 413

Open ring hexagonal wrench

AEEA, 1105M

Dodecagonal open ring wrench

AEEA, 1105M, 411

Bent ring wrench

AAAC, 1108M, 4211

Adjustable wrench

AMAB, 1172, 4230

Adjustable wrench

AMAA, 1170

HAMMERS, CUT-OFF TOOLS

294

Indexes: TOPTUL, HANS, SONIC

Hammer

HAAA, 5742F, 4611, 4621, 4631

Mallet

HAAB, 5700, 46204

Hammer with plastic sides

HAAF, 5702, 4822102

Puncher

HBAA, 5110M, 4532

Puncher

HBAB, 5115M, 45641

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Puncher

HBAC, 5116M

Cut-off tool

HCAB, 5111M, 45110

Cut-off tool kit

GAAV0501, 56110-5, 601227

Puncher kit

GAAV0601, 56110-6, 600624

SOCKETS

Indexes: TOPTUL, HANS, SONIC

Hexagonal socket, short

1/4": BAEA, 2400M, 215 3/8": BAEE, 3400M, 225 1/2": BAEA, 4400M, 235 3/4": BAEB, 6400M

Dodecagonal socket, short

1/4": BAEA, 2402M, 218 3/8": BAEB, 3402M, 228 1/2": BAEB, 4402M, 238 3/4": BAEB, 6402M, 249

Hexagonal socket, long

1/4": BAEE, 2300M, 21550 3/8": BAEE, 3300M, 22563 1/2": BAEE, 4300M, 23577 3/4": BAEE, 6300M

Dodecagonal socket, long

1/4": BAEF, 2302M, 21850 3/8": BAEF, 3302M, 22863 1/2": BAEF, 4302M, 23877

TORX E socket, short

1/4": BAED, 2410, 216 3/8": BAED, 3410, 226 1/2": BAED, 4410, 236

TORX E socket, long

1/4": 21650 3/8": 22663 1/2": BAEH, 4310, 23677

Plug socket Magnetic plug socket

BAAR, 4305M, 71712, 71713, 71722, 71723 71713, 71722, 71723 BAAT, 4335M

Thin-walled hexagonal plug socket Thin-walled dodecagonal plug socket

3335M14 3336M14, 3336MK16

17: KABD1617, 84304M/17, 3310117 19: KABD1619, 84304M/19, 3310119

1/2", thin-walled impact socket for wheels

21: KABD1621, 4304M/21, 3310121 22: 3310122 22: 3310122

PINNED SOCKETS

Indexes: TOPTUL, HANS, SONIC Flat socket

1/4": BCCA, 2021M, 813370 3/8": BCCA 3021M, 823480 1/2": BCCA, 4021M

Philips PH socket

1/4": BCAA,2022, 81137 3/8": BCAA3022, 82148 1/2": BCAA, 4022

Pozidriv PZ socket

1/4": BCBA, 2023, 812370 3/8": BCBA, 3023, 82248

HEX socket

1/4": BCDA, 2026M, 81437 3/8": BCDA,3026M, 82448 1/2": BCDA,4026, 834062

HEX socket, long

3/8": 82490 1/2": BCWA, 4026-4, 834100, 834140

HEX socket, extra long

1/2": BCIA,4026-6, 83424

295

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

296

HEX socket with a ball end

1/4": 81037 1/2": BCPA, 4027, 830100

HEX socket with a ball end, extra long

1/2":BCSA,4027, 830140

TORX socket

1/4": BCFA, 2024, 81637 3/8": BCFA, 3024, 82648 1/2": BCFA, 4024, 836062

TORX socket, long

3/8": 82690 1/2": BCXA, 4024-4, 836100

TORX socket, extra long

1/2":BCGA, 836140 1/2": BCUA/4024-6

TORX TAMPER socket

3/8": 82748 1/2": BCLA, 2025, 837062

TORX TAMPER socket, extra long

1/4": 81037 1/2": BCPA, 4027, 830100

XZN socket

1/2": BCSA, 4027, 830140

XZN socket, long

1/4": BCFA, 2024, 81637 3/8": BCFA, 3024, 82648 1/2": BCFA, 4024, 836062

XZN socket, extra long

3/8": 82690 1/2": BCXA, 4024-4, 836100

TORX pentagonal socket

1/2": BCGA, 836140 1/2": BCUA/4024-6

TORX pentagonal socket, long

3/8": 82748 1/2": BCLA, 2025, 837062

RIBE socket

1/4”: 81937 3/8”: 82948 1/2”: BCQA, 4029, 839062

RIBE socket, long

3/8”: 82990 1/2”: BCRA, 4029-4, 839100

Reduction adapters

1/4”x3/8”: CAEA0812,2804, 71912 3/8”x1/4”: CAEA1208,3805, 71921 3/8”x1/2”:CAEA1216,3804, 71923 1/2”x3/4”: CAEA1624,4805, 71934

Universal joint

1/4”: CAHK0840, 2200, 71516 3/8”: CAHK1254, 4200, 7152 1/2”: CAHK1678, 6200, 71536

Tuning screwdriver for 1/4" sockets

CAIA08158, 2830, 72401

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

SCREWDRIVER BITS

Indexes: TOPTUL, HANS, SONIC Screwdriver bit: 1/4”, 5/16", 10 mm, flat

FSAA, 011-3, 012-4, 013-3, 91325, 92330

Screwdriver bit: 1/4”, 5/16”, 10 mm, Philips PH

FSBA, 21-3,022-4,023-3, 91125, 92130

Screwdriver bit: 1/4”, 5/16”, 10 mm, Pozidriv PZ

FSCA, 031-3,032-3,033-3, 92230

Screwdriver bit: 1/4”, 5/16”, 10 mm, HEX

FSDA, 061-3, 062-4, 063/3, 91425, 92430

Screwdriver bit: 1/4”, 5/16”, 10 mm, TORX

FSEA, 041-3, 042-4,043-3, 93630, 92630

Screwdriver bit: 1/4”, 5/16”, 10 mm, TORX TAMPER

FSGA, 051-3, 052-4, 053-3

Screwdriver bit: 1/4”, 5/16”, 10 mm, square

FSHA, 091-3

Screwdriver bit: 10 mm TORX XZN SPLINE, dodecagonal

FSFA, 083-3, 91825, 9283, 93830

Screwdriver bit: 10 mm HEX, long

FSDB, 063-3, 93475

Screwdriver bit: 10 mm TORX, long

FSEB, 063-7, 93675

Screwdriver bit: 10 mm TORX XZN SPLINE, dodecagonal, long

FSFB, 083-7, 93875

Tuning screwdriver for bits: 1/4”, magnetic

FTBB0824

Tuning screwdriver for bits: 1/4”

FTBA0824

Tuning screwdriver for screwdriver bits: 1/4” with an elastic pin

FTCA0829

Adapter for screwdriver bits

FTAB, 2000, 3000, 3001, 3002, 4000, 4001, 4002, 72011, 72011, 72032, 72033

PINNED WRENCHES

Indexes: TOPTUL, HANS, SONIC Pinned HEX wrench Pinned HEX wrench, long Pinned HEX wrench, extra long

AGAS, 1764M AGAL, 1763M AGAE, 1762M, 184030

Pinned TORX wrench Pinned TORX wrench, long Pinned TORX wrench, extra long

AIAS, 1744 AIAL, 1743 AIAE, 1742, 18603

Pinned HEX wrench, with a ball end, long Pinned HEX wrench, with a ball end, extra long

AGBL, 1773M, 185020 AGBE, 1772M, 185030

Pinned TORX TAMPER wrench, extra long

AIBE, 1752

Pinned HEX wrench, L-handle

AGHD

297

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Pinned HEX wrench, L-handle, ball end

AGCD, 1775, 195010

Pinned TORX wrench, L-handle

AIED, 1755, 19601

SCREWDRIVERS

Indexes: TOPTUL, HANS, SONIC Thick flat screwdriver

FABB, 0311M6-1, 11305, 1136, 133055S, 133065S

Thick star screwdriver, Philips PH

FBBB,0321PH2-1, 1111S, 1112S, 1311S, 1312S

Thick star screwdriver, Pozidriv PZ

FCBB,0331PZ2-1, 1121S, 1122S, 1321S, 1322S

Flat screwdriver

FAAB,0310M, 113, 133

Star screwdriver, Philips PH

FBAB,0320, 111, 131

Flat screwdriver, long

FACB,0410M, 11345065, 11360008

Star screwdriver, Philips PH, long

FBCB,0420M, 1114502

Square screwdriver

FJAB

Star screwdriver, Pozidriv PZ

FCAB, 0330, 1120, 132

TORX TAMPER screwdriver

FEAB, 0350, 117, 137

TORX screwdriver

FFAB, 0340, 116, 136

Tamping screwdriver, flat

FAGB, 0516M, 153

Tamping screwdriver, Philips

FBGB, 0526M, 151

RATCHETS, TUNING WRENCHES

298

Indeksy: TOPTUL, HANS, SONIC

Socket wrench with a rotatable head

1/4": CJMM, 2144PQ, 7110201 3/8": CJMM, 3144PQ, 7110202, 7110402

Socket wrench (ratchet)

1/4": CJDI, 2124P, 7120101 3/8": CJDI, 3124P, 7120102

Socket wrench (ratchet), 36 teeth

1/4": CJBT, 2132GQ 3/8": CJBT, 3132GQ 1/2": CJBT, 4132GQ

Socket wrench (ratchet), 36 teeth, with a retarder

1/4”: CJBG, 2120G 3/8”: CJBG, 3120G 1/2”: CJBG, 4120G

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Socket wrench (ratchet), 45 teeth

1/4": CJPI, 2120GQ, 7120901 3/8": CJPI, 3120GQ, 7120902 1/2": CJPI, 4120GQ, 7120903

Socket wrench (ratchet), 48 teeth

1/4": CJCK, 2140P 3/8": CJCK, 3140P 1/2": CJCK, 4140P

Socket wrench (ratchet), 72 teeth

1/4": CJBM, 2101GQ-72, 7120701 3/8": CJBM, 3101GQ-72, 7120702 1/2": CJBM, 4101GQ-72, 7120703

Socket wrench with a rotatable head

1/4”: 7110501 3/8”: CJEK1225, 7110502 1/2”: CJEK1633, 7110503

Socket wrench with an angled head (short)

1/4”: CJHM, 2144PQ, 7110101 3/8”: CJHM1228, 3144PQ 1/2”: CJHM1631, 4144PQ, 711013300

Socket wrench with a rotatable head

1/4”: CJLN, 2140PQ, 7110201 3/8”: CJLN, 3140PQ, 7110202 1/2”: CJLN, 4140PQ, 7110203

Socket wrench with an angled head (long)

1/4”: CJKN, 2140P 3/8”: CJKN, 3140P 1/2”: CJKN, 4140P, 711013440

Socket wrench

1/4": CHUG, 2100N 3/8": CHUG, 3100N 1/2": CHUG, 4100N

Articulated wrench 1/4”, 1/2”

CFKA, 2700G, 4700G, 727

Articulated wrench 1/4”, 1/2”

CFAE, 2700N, 4700N, 723

Articulated wrench 1/4”, 1/2”

CFAC, 2700P, 4700P, 7233600

Articulated wrench 1/4”, 3,8”, 1/2”

CTCK, 2770 ,4770, 6770, 713

L-type wrench, 3/4”

AFAO, 6770

Extensions: 1/4”, 3/8”, 1/2”

CAAA, 2800, 4800, 7141, 7142, 7143

PLIERS

Indexes: TOPTUL, HANS, SONIC Universal pliers

DBAB, 1820, 43111

Universal straight-line pliers

DFBB, 1830, 4321

Side cutting pliers

DEAC, 1840, 434

Front cutting pliers

DJBA, 1880, 44601280

External pliers for rings, bent

DCAA, 1857, 43603, 43613, 43614

External pliers for rings, straight

DCAB, 1850, 43601, 43611, 43612

Internal pliers for rings, bent

DCAC, 1856, 43604

Internal pliers for rings, straight

DCAD, 1851, 43602

Straight long-nose pliers

DFAB2206B/1864-6, 4323 DFAB2208B/1864-8, 4333

Universal pliers, bent

DFBA, 1831, 43312

299

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Adjustable pliers

DDBA, 1891, 4351

Self-locking pliers, MORS

DAAQ, 1804, 4380

IMPACT SOCKETS

Indexes: TOPTUL, HANS, SONIC

Hexagonal impact socket, short

3/8”: 325 1,2”: KABA, 84400M, 335 3/4”: KABA,86400M, 345 1”: KABA, 88400M, 355

Hexagonal impact socket, long

3/8”: 3256 1/2”: KABE, 84300M, 3358 3/4”: KABE, 86300M, 3459 1”: KABE, 88300M, 3559

TORX E impact socket

3/8” :KABK, 82410 1/2”: KABK, 84410, 3367, 3469

Pinned TORX socket

3/8”: KADA, 83014 1/2: KADA, 84014

Pinned impact HEX socket

3/8”: KADH, 83016 1/2”: KADH, 84016 3/4”: KADH, 86016 1”: KADH, 88016

Impact reduction adapter

1/2”x3/4”: KACA1624, 84805, 73634 3/4”x1/2”: KACA2416, 86804, 73643 3/4”x1”: KACA2432, 86805, 73645 1”x3/4”:KACA3224, 88804

Impact articulation

1/2”:KABG, 84200, 73531, 7150 3/4”: KABG, 86200, 73541 1”: KABG, 88200

Impact extension

3/8”: 7342 1/2”: KACE, 84800, 7343 3/4”: KACE, 86800, 7344 1”: KACE, 88800, 73451

TORQUE WRENCHES

Indexes: TOPTUL, HANS, SONIC 1/4”: ANAF0803, 2107GN, 73110420, 73210525 3/8”: ANAF1203, 3170GN, 7312 3/8”: ANAF1211/3171GN, 7322 1/2”: ANAF1621/4170GN, 7313

Torque wrench

1/2”: ANAF1635/4171GN, 7323 3/4”: ANAF2450/6170GN, 7314, 7324 1”: ANAA, 8170-2GN, 7325

List of the most popular hand tools

1”

3/4”

1/2”

3/8”

1/4”

in the form of a desk pad. IC index

PODKLADKA WW

MODELLING AND CALIBRATION SERVICES FOR DYNAMOMETRIC WRENCHES WITHIN 2–1100 [NM] EVERY WRENCH, JUST LIKE ANY OTHER TOOL, IS SUBJECT TO WEAR AND TEAR. CHECK YOUR WRENCH!

300

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

BOOST YOUR IMAGE, PRODUCTIVITY AND PERFORMANCE IC index

4730670

3 10

6 12

INDEX 4731355

LEFT

INDEX 4732355

RIGHT

PERFECT WORKPLACE, ALL THE NECESSARY TOOLS AND WORKSTATION IN ONE PLACE, INCREASE YOUR EFFICIENCY

1 FIXED AND 6 ADJUSTABLE SHELVES

STRONG AND DURABLE GUIDES ON BALL BEARINGS

TOOL BOARD

CABINET WITH GAS SHOCK ABSORBERS

2x USB CONNECTORS, 2x LAN CONNECTORS, 2x AIR CONNECTORS 10

STEEL WORKING TABLE TOP

COMPATIBLE WITH SONIC SFS TOOLS IN A FOAM TRAY

4 ELECTRICAL SOCKET (220–230 V)

FULL DRAWEROPENING

CENTRAL LOCK

44 DRAWERS WITH 40-KG LOAD CAPACITY

SELF-SUPPORTING CONSTRUCTION – NO WALL REQUIRED

INTERNAL DIMENSIONS OF DRAWERS (LEFT AND RIGHT) IN TOTAL: 44 DRAWERS, 22 LEFT AND 22 RIGHT

1X DEEP DRAWER L: 1390 D: 578 H: 102

2X DRAWERS L: 579 D: 578 H: 146

4X DRAWERS L: 579 D: 578 H: 67

3X DRAWERS L: 750 D: 578 H: 146

12X DRAWERS L: 750 D: 578 H: 67

2100MM

6536M

720M

301

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

GET ORGANISED, BOOST YOUR PERFORMANCE SONIC – NEW, TOP QUALITY OF YOUR WORK AREA

SPECIAL OFFER

SELF-SUPPORTING CONSTRUCTION, NO WALL MOUNTING REQUIRED – MOUNT THE MSS SYSTEM IN ANY LOCATION, WITH NO LIMITS

INDEX 4730281

WOODEN TABLE TOP

INDEKS 4731281 STAINLESS STEEL TABLE TOP DIMENSIONS: 2803 X 530 X 2000 MM

SPECIAL OFFER

INDEX 4731513

WOODEN TABLE TOP

SPECIAL OFFER

INDEX 4731517

INDEX 4731813 STAINLESS STEEL TABLE TOP DIMENSIONS: 2193 X 530 X 2000 MM

WOODEN TABLE TOP

INDEX 4731817 STAINLESS STEEL TABLE TOP DIMENSIONS: 2803 X 530 X 2000 MM

SPECIAL OFFER

INDEX 4730230

WOODEN TABLE TOP

INDEX 4731230 STAINLESS STEEL TABLE TOP DIMENSIONS: 2300 X 530 X 2000 MM

302

SPECIAL OFFER

INDEX 4730196

WOODEN TABLE TOP

INDEX 4731196 STAINLESS STEEL TABLE TOP DIMENSIONS: 1958 X 530 X 2000 MM

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

GET ORGANISED, BOOST YOUR PERFORMANCE SONIC â&#x20AC;&#x201C; THE TOP QUALITY OF YOUR WORK AREA 6

2 5

TOOL BOARD

STEEL WORKING TABLE TOP

FULL DRAWER OPENING

VERY ROBUST GUIDES ON BALL BEARINGS

CENTRAL LOCK

CABINET WITH GAS SHOCK ABSORBERS

COMPATIBLE WITH TOOLS IN FOAM SONIC SFS TRAYS

44 DRAWERS WITH 40-KG LOAD CAPACITY

AVAILABLE WITH A WOODEN TABLE TOP

3 4

SPECIAL OFFER

INDEX 4731520

WOODEN TABLE TOP STAINLESS STEEL TABLE TOP

2000MM

INDEX 4731820 DIMENSIONS: 3099.5 X 2254.5 X 2000 MM

COMPATIBLE WITH SFS 3099,5

MM 2254,5MM

SELF-SUPPORTING CONSTRUCTION, NO WALL MOUNTING REQUIRED MOUNT THE MSS SYSTEM IN ANY LOCATION, WITH NO LIMITS

SPECIAL OFFER

INDEX 4731314

WOODEN TABLE TOP

INDEX 4731614 DIMENSIONS: 3916 X 530 X 2000 MM

STAINLESS STEEL TABLE TOP

303

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

SPECIAL OFFER

EMPTY TOOL FOAM TRAY, 5 DIVISIONS EMPTY TOOLFOAM TRAY, INDEX 4720102 5 DIVISIONS DIMENSIONS: 370 X 145 X 48 MM INDEX 4720101

INDEX 47505

MSS 34” CORNER LOCKER, NO TOP

INDEX 4731414

MSS 34” CORNER LOCKER, WOODEN TOP

INDEX 4731714 MSS 34” CORNER LOCKER, STEEL TOP DIMENSIONS: 877 X 877 X 1002 MM

INDEX 4821519

CONTAINER FOR CLAMP STRIPS (MSS / MWS)

INDEX 4821518

FULL CONTAINER FOR CLAMP STRIPS (MSS / MWS)

INDEX 4821511

2X STRIPS 3.6 X 140 MM 100 PCS.

INDEX 4821512

2X STRIPS 3.6 X 180 MM 100 PCS.

INDEX 4821513

2X STRIPS 3.6 X 220 MM 100 PCS.

INDEX 4821515

2X STRIPS 3.6 X 280 MM 100 PCS.

INDEX 4821517

2X STRIPS 3.6 X 370 MM 100 PCS.

INDEX 47272 24” CABINET WITH FIVE SHELVES DIMENSIONS: 610 X 530 X 2000 MM SPECIAL OFFER

INDEX 4720103 EMPTY TOOL FOAM TRAY, 8 DIVISIONS DIMENSIONS: 370 X 290 X 48 MM

SPECIAL OFFER

INDEX 47450

26“ LOCKER, NO TOP

INDEX 4731312

26” LOCKER, WOODEN TOP

INDEX 4731612 26” LOCKER, STEEL TOP DIMENSIONS: 674 X 500 X 1002 MM

SPECIAL OFFER

INDEX 4720105 EMPTY TOOL FOAM TRAY, 18 DIVISIONS DIMENSIONS: 370 X 290 X 48 MM

INDEX 4720104 EMPTY TOOL FOAM TRAY, 12 DIVISIONS DIMENSIONS: 370 X 290 X 48 MM

INDEX 47433 36” DOUBLE-DOOR CABINET DIMENSIONS: 914 X 530 X 2000 MM

INDEX 47451 26” MOVABLE LOCKER, 7 DRAWERS DIMENSIONS: 674 X 500 X 947 MM

SPECIAL OFFER

INDEX 47280

26“ CABINET, NO TOP

INDEX 47296

34“ CABINET, NO TOP

INDEX 4731308

26” CABINET, WOODEN TOP

INDEX 4731407

34” CABINET, WOODEN TOP

SPECIAL OFFER

INDEX 47276 26” CABINET DIMENSIONS: 674 X 300 X 400 MM INDEX 47292 34” CABINET DIMENSIONS: 845 X 300 X 400 MM

INDEX 4731707 34” CABINET, STEEL TOP DIMENSIONS: 845 X 500 X 1002 MM DRAWER DIMENSIONS: 740 X 435 MM

INDEX 4731608 26” CABINET, STEEL TOP DIMENSIONS: 674 X 500 X 1002 MM DRAWER DIMENSIONS: 575 X 370 MM

INDEX 47376

26” FULL-SIZE BOARD

INDEX 47380

34” FULL-SIZE BOARD

SPECIAL OFFER

INDEX 47288

26“ CABINET, NO TOP

INDEX 47302

34“ CABINET, NO TOP

INDEX 4731309

26” CABINET, WOODEN TOP

INDEX 4731408

34” CABINET, WOODEN TOP

INDEX 4731609 26” CABINET, STEEL TOP DIMENSIONS: 674 X 500 X 1002 MM

INDEX 4731708 34” CABINET, STEEL TOP DIMENSIONS: 845 X 500 X 1002 MM

SPECIAL OFFER

INDEX 47308

26” CABINET, NO TOP

INDEX 47379

34“ CABINET, NO TOP

INDEX 4731310

26” CABINET, WOODEN TOP

INDEX 4731410

34” CABINET, WOODEN TOP

INDEX 4731610 26” CABINET, STEEL TOP DIMENSIONS: 674 X 500 X 1002 MM DRAWER DIMENSIONS: 575 X 370 MM

304

SPECIAL OFFER

INDEX 4731710 34” CABINET, STEEL TOP DIMENSIONS: 845 X 500 X 1002 MM DRAWER DIMENSIONS: 740 X 435 MM

INDEX 47377 STAINLESS STEEL TOP DIMENSIONS: 674 X 500 X 40 MM INDEX 47381 STAINLESS STEEL TOP DIMENSIONS: 845 X 500 X 40 MM INDEX 47383 STAINLESS STEEL TOP DIMENSIONS: 1348 X 500 X 40 MM INDEX 47384 STAINLESS STEEL TOP DIMENSIONS: 1690 X 500 X 40 MM INDEX 47385 STAINLESS STEEL TOP DIMENSIONS: 2193 X 500 X 40 MM

SPECIAL OFFER

INDEX 47283 CONNECTOR DIMENSIONS: 60 X 30 X 2000 MM INDEX 47284 CONNECTOR DIMENSIONS: 30 X 30 X 2000 MM

SPECIAL OFFER

INDEX 47378 WOODEN TOP DIMENSIONS: 674 X 500 X 40 MM INDEX 47382 WOODEN TOP DIMENSIONS: 845 X 500 X 40 MM INDEX 47279 WOODEN TOP DIMENSIONS: 1348 X 500 X 40 MM INDEX 47295 WOODEN TOP DIMENSIONS: 1690 X 500 X 40 MM INDEX 47306 WOODEN TOP DIMENSIONS: 2193 X 500 X 40 MM

INDEX 47415 HOOK 45° DIMENSIONS: 50 MML

INDEX 47416 ROUND HOOK DIMENSIONS: Ø40 MML

INDEX 47419 HOOK 90° DIMENSIONS: 50 MML

INDEX 47290 DIMENSIONS: 90 MML

INDEX 47417 DIMENSIONS: Ø60 MML

INDEX 47420 DIMENSIONS: 90 MML

INDEX 47291 DIMENSIONS: 150 MML

INDEX 47418 DIMENSIONS: Ø80 MML

INDEX 47421 DIMENSIONS: 150 MML

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Mobile tool trolley

3-part foldable type, double drawer, capacity: 75 kg IC index

0XPTWB0050

Workshop tool board

dimensions: 2000x510x30 mm IC index

0XPTWB0057

Workshop table drawer

dimensions: 680x270x130 mm IC index

0XPTWB0060

Foldable metal tool box

4 trays + bottom storage, dimensions: 450x200x208 mm IC index

0XPTWB0105

Standing workshop cabinet

with 5 drawers, dimensions: 680x458x720 mm IC index

0XPTWB0055

Hanging tool board

dimensions: 636x680x30 mm IC index

0XPTWB0059

Metal tool box

2 drawers + upper storage, dimensions: 590x265x335 mm IC index

0XPTWB0103

Set of 3 plastic-metal tool boxes pack dimensions: 595x390x520 mm IC index

0XPTWB0109

305

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Service trolley

1 drawer (non-closable), 2 shelves, ABS table top, dimensions: 690x470x815 mm IC index

TCAD0101

2 drawers (closable), movable ABS table top, dimensions: 705x830x370 mm

0XPTWB0014

2 drawers (closable), dimensions: 712x814x440 mm

0XPTWB0015

3 drawers, black, dimensions: 860x500x1040 mm IC index

4732013

floor-mounted version, dimensions: 840x710x430 mm, weight: 2.8 kg

0XPTCZ0001

wall-mounted version, dimensions: 270x240x360 mm, weight: 1.6 kg IC index

306

0XPTCZ0002

1 drawer (closable), 2 shelves, ABS table top, dimensions: 805x845x382 mm

0XPTWB0012

Service trolley

3 shelves, HEAVY DUTY composite, load capacity â&#x20AC;&#x201C; 83 kg each shelf!

SEA CX203

Service trolley 3 shelves, dimensions: 805x845x382 mm IC index

Metal towel hanger

0XPTWB0010

Service trolley

IC index

Metal towel rack IC index

1 drawer (non-closable), 2 shelves, dimensions: 805x845x382 mm

IC index

Service trolley

0XPTWB0013

Service trolley IC index

1 drawer (closable), movable ABS table top, dimensions: 705x830x370 mm IC index

Service trolley IC index

Service trolley

0XPTWB0011

Universal blue wipe-cleaner 2 rolls; length 180 m, height 22 cm, 500 sheets,

3 layers. Universal cellulosic blue, glued wipe-cleaner. Used in workshops and paint shops. IC index

0XC001

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Tool locker

Locker

wall-mounted version, dimensions: 1560x200x603 mm 1

IC index

TAAD1602

with a black finish, 3 drawers 3

IC index

TBAA0304 2

Workshop table

Tool trolley

size: 1560x710x827 mm, with levelling feet 2

IC index

TAAA1607

Tool closet

IC index

0XPTWB0017S

IC index

a wooden table top, closable, with side shelves, dimensions: 1372x865x508 mm IC index

Workshop cabinet

0XPTWB0029S

Workshop cabinet

a wooden table top, 2 drawers, with side shelves, dimensions: 1372x865x508 mm

a display case, 3-wing type, closable, dimensions: 1200x600x200 mm IC index

0XPTWB0028S

0XPTWB0016S

Dimensions: 140x105x75 mm

IC index

TAAF6118

Workshop cabinet

0XPTWB0027S

Dimensions: 440x39x19.5 mm

SPECIAL OFFER

dimensions: 611x180x981 mm

0XPTWB0025S

a wooden table top, 5 drawers, with side shelves, dimensions: 1372x865x508 mm

IC index

Wall cabinet

for clothing, 3-wing type, closable, dimensions: 915x1980x457 mm (with an extension)

Workshop cabinet IC index

TCAB0501

Workshop cabinet

3-wing displaycase type, closable, dimensions: 1200x600x200 mm IC index

5 drawers, standard green, dimensions: 569x340x661 mm

IC index

0XPTWB0031

Dimensions: 220x140x125 mm IC index

0XPTWB0032

0XPTWB0030 Dimensions: 270x140x125 mm IC index

Dimensions: 56x65x35 mm IC index

0XPTWB0035

Dimensions: 72x76x30 mm IC index

0XPTWB0036

0XPTWB0033

Dimensions: 370x65x39 mm IC index

0XPTWB0034

Dimensions: 56x65x35 mm IC index

0XPTWB0039

Dimensions: 72x76x30 mm IC index

0XPTWB0040

Dimensions: IC index

0XPTLT07-04 307

WORKSHOP TROLLEYS, FURNITURE AND HAND TOOLS

Workshop table

made of metal, with a wooden table top, 2 lockable shelves, table dimensions: 1500x1500x700 mm (with an extension) IC index

made of metal, with a metal table top, a tool board over the table top, table dimensions: 1500x1500x700 mm (with an extension)

0XPTWB0022S

IC index

Workshop table

with a tool board, 2 closable drawers, made of metal, table dimensions: 1500x1550x640 mm IC index

IC index

on wheels, with a drip tray, a closable drawer, compressedair gun, table dimensions: 1300x800x830 mm, max. load capacity: 1000 kg IC index

on wheels, with a drip tray, a closable drawer, table dimensions: 1220x810 mm IC index

0XPTWB0020S

IC index

equipped with 6 wheels, a tool container, weight: 4.8 kg

0XPTWB0003

Tool board

dimensions: 1010x590 mm

0XPTWB0009S

0XPTWB0018S

Workshop fitterâ&#x20AC;&#x2122;s couch dimensions: 901x425x120. IC index

0XPTWB0063

Workshop stool

with a tool container, dimensions: 380x380x440 mm, weight: 5.7 kg IC index

308

0XPTWB0004

2 closable drawers, made of metal, table dimensions: 1500x865x640 mm

Workshop fitterâ&#x20AC;&#x2122;s couch

IC index

Workshop table

3 closable drawers, made of metal, table dimensions; 2000x865x640 mm

IC index

SALE

0XPTWB0021S

0XPTWB0062

Workshop table IC index

with a tool board, 3 closable drawers, made of metal, table dimensions: 2000x1550x640 mm

0XPTWB0019S

Professional workshop table

0XPTWB0023S

0XPTWB0002

SPECIALISED TOOLS

Tool-kit

for the removal of a split tip, filament, glow plug electrode (M10x1) with no need to dismantle the glow-plug head IC index

0XWA0006

Tool-kit

for the removal of a split tip, filament, glow plug electrode (M9x1) with no need to dismantle the glow-plug head IC index

0XWA0034

Tool-kit

used to unscrew glow plugs – M10x1 – in MB CDI, VAG TDi and Ford engines with no need to dismantle the glowplug head IC index

milling cutters used to clean a spark-plug socket – M10x1.25/M10x1/M9x1/M8x1

0XWA0042

Kit

extra long (overall length: 150 mm) wrenches used to take out sparkplugs / glow-plugs (3/8”; 8, 9, 10, 12, 14, 16 mm) with milling cutters (6x10x103 mm, 7.5x12x95 mm) IC index

for the removal of a split tip, filament, glow plug electrode (M8x1) with no need to dismantle the glow-plug head IC index

0XWA0011

Tool-kit

for the removal of a split tip, filament, glowplug electrode (M10x1.25) with no need to dismantle the glow plug head IC index

0XWA0035

Milling cutter

designed for levelling the front face of VW VAG 1.9/2.5 TDi crankshaft (made of high-speed steel) IC index

0XWA0001

0XWA0022

Tool-kit IC index

Tool-kit

Full tool-kit

designed for regenerating spark-plug threads – M14 x 1.25, threaded insert height: 9.4 and 15 mm IC index

0XAT1111

Thread regeneration kit

for spark-plugs / glow-plugs – 31 elements IC index

0XAT1397

0XAT1132

309

SPECIALISED TOOLS

Kit

for the removal of plugs and cleaning their sockets (6x10x103 mm, 7.5x12x95 mm) IC index

0XAT1426

for the removal of plugs, a pneumatic impact wrench for removing glow-plugs, 4-degree torque adjustment, the kit includes 1/4” sockets (8, 9, 10, 11, 12 mm), two extensions and joint

BE960KPC

Strobe lamp

for petrol and Diesel engines; features: measuring the following parameters: rotation speed, ignition advance angle, dynamic initial pumping angle, glow-plug switching time, voltage, interrupter contact angle, current intensity, injector pulse width IC index

intended to replace a clutch in Audi, Seat, Skoda and Volkswagen cars equipped with an automatic gearbox and dry double clutch (”DSG”)

Basic lamp

stroboscopic lamp designed to set ignition in petrol engines IC index

for VW (88–96) wheel tilt

Strobe lamp

used to set an ignition angle in petrol engines, with advance adjustment and operational speed measurements IC index

WTM/XENON-2E

Universal kit

used to provide service to SAC and XTend clutches IC index

INSA EKOTEND

HP902 100 00

GST mobile suspension tester

(mobile suspension clearance tester) The patented mobile suspension tester by FEBI is an ideal solution for the quick and easy diagnosis of steering components on the front and rear car axles. Provides the possibility to detect the wear of joints, even at its initial stage. The device can be used wherever it is no need for a hydraulic lift. IC index

310

WTM/XENON-1

INSA HETMAN

PINDUR Angle adjusting device IC index

0XAT1401

WTM/XENON 310U

Tool kit

IC index

for the montage and removal of ignition wires and coils, VAG group (4 pcs.) IC index

Kit

IC index

Kit

FE80122

SPECIALISED TOOLS

Puller

for valve springs as well as sealers with no need to remove their head; works well with OHC, OHV and CVH engines. IC index

0XAT1179

Bayonet

used to check the oil level in the following engines – Mercedes 1988–1997 with codes: 103, 104, 111, 119, 120, 137, 604, 605, 606, 611, 612, 613, 628, 642, 647, 648 IC index

0XAT1447

Universal puller

for valve springs in 8V, 16V and 24V heads IC index

0XAT1136

Kit

for the assembly of a crankshaft sealer in 1.9, 2.0 Diesel VAG OE T1013 engines IC index

Bayonet

used to check the oil level in the following engines – Mercedes 1996–2005 with codes: 112, 113, 271, 272, 642, 646, 647, 648 IC index

for head components IC index

0XAT1489

Device for running-in valve seats

2 pcs.: small: 5/8 and 16/16”, large 1–1/18 and 1–3/8” IC index

0XAT1137

Pliers

for removing gaskets off valves IC index

0XAT1478

0XAT1448

Device for detecting head gasket leaks

detects CO2 in the cooling system IC index

Stand (organiser)

0XAT1352B

0XAT1175

Compressor for valve springs jaw spacing: 55–175 mm, depth: 165 mm IC index

0XAT1134

Device for removing gaskets off valves fitted with a puncher, suitable for valve shank gaskets, diameter: 10 mm to 19 mm IC index

0XAT1291

Tool-kit

for processing valve sockets (milling cutters), dia. 28–37 mm 30 degrees, dia. 28–37 mm 45 and 75 degrees, dia. 37–44 mm 75 degrees, dia. 37–46 mm 45 and 60 degrees. IC index

0XAT1616B

311

SPECIALISED TOOLS

Camshaft lock kit

for VAG 1.8 / 2.0 4v TFSI with a camshaft chain IC index

MASTER for FORD (diesel and petrol) IC index

0XAT0009

Camshaft lock kit

Universal camshaft lock

for VOLVO, 4, 5 and 6-cylinder petrol engines IC index

for Twin/Quad-type Diesel engines, spacing: 28–92 mm

0XAT1600

IC index

Camshaft control kit

for the blocking of camshaft in petrol and diesel engines, suitable for VAG cars IC index

Camshaft control kit

Mercedes engines: M112, M113

in Chrysler CRD/Mercedes CDi, chaindriven engines; OEM: 111589031500 / 8929, 601589024000 / 8932, 602589004000 / 8933

0XAT1063

IC index

Camshaft lock kit

Ford, Mazda 16 V zetec, petrol engines: Ford 1.6; 1.8 16V with two camshafts

0XWAR0022

Camshaft lock kit

IC index

for engines: OPEL CORSA 1.0 1.2 1.4 DOHC IC index

0XWAR0030

0XWAR0023

Camshaft lock kit

FIAT/IVECO 2.3/3.0JTD, engine types: 2.3 – F1AE0481C, F1AE0481ID, F1AE048IN (2002– 2008), 3.0 – FICE0481A with a chain (2004–) IC index

312

0XAT1334

Camshaft lock kit

for FIAT 1.2 16 V engines IC index

0XAT1539

0XAT1547

Camshaft lock kit IC index

0XAT1734

Universal tool-kit

Fiat / Iveco / Ford 2.2, 2.3, 3.0 l; engine designation: F1AE0481 (A, B, C, F, G, H, D, N); FICE0481 (A,F) – HPI engines; FICE0481 (B, H) – HPT engines IC index

0XAT1376

0XWAR0078

Camshaft lock kit

Ford TDCI, Ford Fiesta, Focus, Transit, Mondeo IC index

0XWAR0028

Universal lock

for the blocking of camshaft gears with eight interchangeable tips IC index

0XWAR0238

SPECIALISED TOOLS

Camshaft lock kit Opel Corsa 1.0 1.2 DOHC IC index

0XWAR0030

Camshaft lock kit Renault16 V petrol/1.5 dCI IC index

0XWAR0011

Camshaft lock

1.3 CDTI/JTD (Fiat Multijet , Opel CDTI) IC index

0XWAR0025

Camshaft lock

Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 Turbo 16 V ; 1.5 dCi IC index

0XWAR0156

Camshaft lock

Audi Vw Skoda 2.4 ; 2.7 ; 2.8 IC index

0XWAR0269

Camshaft lock

Mercedes 2.0 2.1 2.2 CDI set IC index

0XWAR0477

Camshaft lock

BMW M52 M54 M56 M52TU IC index

0XWAR0480

Camshaft lock kit Opel/Fiat 1.9 JTD IC index

0XWAR0034

Camshaft lock kit Renault/Opel/Nissan 1.5 1.9 2.2 2.5 DCI IC index

0XWAR0038

Camshaft lock

Ford /Mazda 16 V Zetec + Volvo V 50 16 V 1.8 / 2.0 with a chain – petrol (war 177 + war 23) IC index

0XWAR0185

Camshaft lock

Citroen / Peugeot 1.8 / 2.0 16 V (6fZ ; RFN ) IC index

0XWAR0346

Camshaft lock

1.4 FSI ; TFSI 1.6 FSI with a camshaft chain IC index

0XWAR0283

Camshaft lock

MERCEDES-BENZ engines: M651 MB (07–) IC index

0XWAR0478

Camshaft lock

Audi 2.8 FSI / 3.2 FSI / 3.0 TFSI IC index

0XWAR0481

313

SPECIALISED TOOLS

Camshaft lock kit

for the following engines: Opel / Vauxhall / Saab V6 2.5/2.6/3.0/3.2 with their codes: X25XW, X30XE, Y26SE, Y32SE/ B258, B308, B308E IC index

FORD: 1.8 D/TD/Di/TDCi and petrol 1.25 up to 2.0 16V Twin Cam (Zetec/Duratec) engines

0XAT1648

Specialised pliers 0XAT1062

0XAT3055

for the removal of clips (10-in-1), universal application

0XAT5023

IC index

0XAT1535

(two joints in the handle) Sockets: 8, 10, 11, 13, 14, 16 mm. Bits: PH1, PH2, PH3, T8, T10, T15, T20, S1, S1, flat – 1/8, 3/16, 1/4 + adapter

0XAT1323

Set of wrenches

for glow-plugs (3/8”; 8, 10, 12 mm), 75-mm extension, milling cutters for glow-plug sockets (6mm x 10mm x 103mm, 7.5mm x 12mm x 95mm)

0XAT1257

Kit

for the removal of injectors for VW & Audi, OEM No. T10133 IC index

Ratchet 3/8” with swirel hand 360o

314

for VW 98, Audi 97 – petrol /Diesel, AFB, AKE, AKN, AYM engines

IC index

Device

IC index

Camshaft lock kit

IC index

used to disconnect fuel- and air-conditioning lines – 8 pcs., 5/16”/8mm, 3/8”/9.5mm, 1/2”/13mm, 5/8”/16mm, 3/4”/19mm, 7/8”/22mm

IC index

0XAT4396

used to check the tightness of cylinders in diesel engines (passenger cars), with a set of glow-plug and injector connectors

Kit

IC index

Kit

7 pcs., clamping pliers with a locking mechanism IC index

(for fitting, widening) diameters: 22-50mm

0XAT1037

Camshaft control kit IC index

Tools for exhaust pipes installation

0XAT1730

Set of impact reducers

6 pcs. (1/4” - 3/8”, 3/8” - 1/4”, 3/8” - 1/2”, 1/2” - 3/8”, 1/2” - 3/4”, 3/4” - 1/2”) IC index

0XAT8105

0XAT4068

NEW

SPECIALISED TOOLS

Set of 4 levers

Dimensions: 6.2x200, 8x300, 11.1x460, 11.1x610 m IC index

0XAT8020

Tool-kit

for the unscrewing and fixing of shock absorbers. Shank locking pads (10 pcs.) Loop-through caps: 16 mm, 17 mm, 18 mm, 19 mm, 21 mm, 22 mm, 24 mm IC index

Telescopic compressor

for shock-absorber springs (internal), 1250 kg. Spring size: O80–135 mm. Jaw spacing: 115–300 mm IC index

0XAT4036

Arm used to separate suspension elements Adjustable support point IC index

0XAT4239

Puller

0XAT4014

Puller

for ball joints (pins). Max. jaw spacing: 30 mm (1–3/16) and 56 mm (2–3/16). Open jaw spacing: 22 mm. IC index

0XAT4030

Puller

for 400-mm long-range ball joints (pins). Jaw spacing: 19 mm. IC index

Nut wrench

for upper shock-absorber mounting in VW/Audi vehicles IC index

0XAT4093

Puller

for ball joints (pins) and steering rod ends, spacing: 19 mm IC index

0XAT4013

Puller

for ball joints (pins) IC index

0XAT4064

0XAT4017

for ball joints (pins) and steering rod ends with height adjustment, 24 mm IC index

0XAT4029

Puller

for ball joints (pins) – 5 pcs. IC index

0XAT4015

Puller

for 300-mm long-range ball joints (pins). Jaw spacing: 24 mm. IC index

0XAT4017-02

315

SPECIALISED TOOLS

Adjuster

for fuel dosage in TDI VW/AUDI IC index

0XWAR0040

for valve springs in engines (8V/12V/16V)

0XWAR0024

for ”curved” arm-rocker bushings in VW GOLF III / PASSAT / VENTO – to be pressed in

0XWAR0010

Puller

for rear-beam bushings in Renault Laguna II IC index

0XWAR0047

for MAX valve springs – additional adapters increase vehicle capabilities IC index

0XWAR0071

for metal-rubber rear arm-rocker bushings, longitudinal type in Honda Civic, CR-V, Concerto, CRX, Rover 200 (no. bushing OE: 52385-SR3-000)

0XWAR0485

Puller / Adapter

used to pull an injector in Renault 2.3, post-2012 models (20 mm) IC index

316

0XWAR0467

0XWAR0005

M12 nut

with a bearing (hardened) for pullers IC index

0XWAR0149

Puller

for bushings in Golf IV / Audi A3 / Skoda Octavia – to be pressed in

0XWAR0006

Water pump wrench

used to tighten a camshaft belt in Opel / Daewoo / Chevrolet 41 mm IC index

Puller / Press

IC index

for plastic bushings in Skoda Fabia / VW Polo / Seat Ibiza – to be pressed in

IC index

Puller

0XWAR0001

Puller IC index

used to replace floating bushings in OPEL VECTRA B/BMW E 36 IC index

Puller IC index

Puller

0XWAR0257

Puller

for the montage and removal of rear beam bushings in AUDI A4, A4 Avant 94-01 IC index

0XWAR0479

Puller

for injection pumps in Jeep Grand Cherokee 3.1 IC index

0XWAR0456

SPECIALISED TOOLS

Pneumatic hammer

included with four adapters. Tool-kit for loosening locked joints, e.g. steering rods ends. IC index

0XAT5143

Bolt cap

(35 mm), Peugeot 405, Citroen IC index

0XAT4121

Puller kit

for ball pins and rod ends – 3 pcs.: small 23 mm, medium 28 mm, large 34 mm IC index

Tool-kit

for the removal of bearings and metal rubber bushings. Sizes: 34, 35, 37, 39, 40, 41, 42, 45, 60, 62, 64, 66, 68, 72, 74, 80, 82, 84 mm IC index

Tool-kit

for the removal and montage of metal-rubber bushings in beams; Opel Vectra IC index

0XAT4007

Device

for the montage and removal of plastic rear bushings at front arm-rocker – VAG. Fits VW Polo III / Skoda Fabia / Seat. IC index

0XAT4044

Tool-kit

for the removal and montage of bearings and metal-rubber bushings (dia.: 50 / 55 / 60 / 64 / 67 / 70 / 72 / 74 / 78 / 82 / 88 mm). Resistant to high loads. IC index

0XAT4081

0XAT4005

Tool-kit

for the removal and montage of bearings and metal-rubber bushings (diameters: 55.5 / 59 / 62 / 65 / 66 / 71.5 / 73 / 78 / 84 / 86 / 91 mm) IC index

0XAT4010

Device

for the montage and removal of metal-rubber bushes at rear beams – VW Golf IV Audi A3. Application: Audi; A3, VW; Bora, Golf IV. IC index

0XAT4054

Tool-kit

for the removal of axial bearing / 3 elements IC index

0XAT4095

0XAT4097

317

SPECIALISED TOOLS

Puller for suspension springs

the kit includes the following jaws: 80–115 mm, 110–150 mm, 140–195 mm IC index

two-armed, max. 370 mm, 2 pcs. IC index

JGAI0801

Compressor for suspension springs – CANVIK PLUS

SPECIAL OFFER

SG49.0025

IC index

Compressor for suspension springs – CANVIK PLUS

SPECIAL OFFER

pressure level: 1800 kg, 2 sets of clamps + LED UNIFORM workshop lamp with a battery indicator IC index

Compressor for suspension springs – CANVIK PLUS

internal 2500 kg, for most Mercedes cars and vehicles with rear axle springs with no shock absorbers in the middle

pressure level: 1800 kg, 2 sets of clamps + LED ” Star MAG” workshop lamp IC index

JEAC0137

SG49.0067

SG13.0001

Puller for suspension springs – CANVIC BASIC pressure level: 1500 kg + 2 sets of clamps IC index

SG12.0001

CANVIK TITAN – SUPER KIT

Stationary spring puller with a pressure level of 2500 kg. Provides full compression in 23 seconds. Thanks to the hydraulic drive, it allows for precise and smooth compression, which makes the removal process much more convenient and safe. The kit includes 6 additional jaws, suitable for all car brands. IC index

SG49.0010

2 pcs. 90.0010 2 pcs. 90.0025 2 pcs. 90.0050 90.0060 90.0070 90.0080

318

Standard jaw spaced: 80–145 mm Special jaw spaced: 145–195 mm Standard jaw spaced: 80–120 mm Standard jaw for conical springs spaced: 80–145 mm Special jaw for BMW E39, E46, Renault Megane II and Toyota Avensis Special jaw for Mercedes C-Class The catalogue is for reference purposes only. It does not constitute an offer under the law. Photos of products may slightly differ from their actual appearance. Contact your INTER CARS representative to obtain prices and more details.

SPECIALISED TOOLS

Kit for removing and replacing bearings

(also in ’blind’ frames) – 16 elements, sizes: 8–11 m, 12–17 mm, 18–23 mm, 24–29 mm, 30–34 mm, 3437 mm, 39–42 mm, 44–47 mm, 49–52 mm, 54–57 mm IC index

for the replacement of bearing support rings and gaskets

0XAT4293

Pliers

for joint cover bands IC index

for the montage and removal of bearings – 26 elements IC index

0XAT4077

Device

used to tighten joint cover bands IC index

Device

used to mount joint covers, length: 320 mm

0XAT4132

Puller for drive joints

without having to dismantle semi-axles (CVJ Puller). Allows for their safe disassembly with no risk of damage IC index

0XAT4189

0XAT4040

Universal puller

for ball joints (pins) in trucks, e.g. DAF, Iveco, MAN, Mercedes, Scania. Fork sizing: 25–32–47 mm. IC index

IC index

0XAT4250

0XAT4153

Tool-kit IC index

Universal kit

0XAT4111

Specialised pliers

used to tighten joint cover bands. L=240 mm, Heavy-Duty feature IC index

0XAT4185

Puller for ball joints (bolts)

hydraulic and manual type – HGV, min. pressure: 12 t, jaw spacing: 35 mm; max. jaw spacing: 100 mm IC index

0XAT4258

319

SPECIALISED TOOLS

Digital car multimeter 8 features IC index

SEA MM20

fully-insulated probes with a spring clip, fit most multimeter systems

SEA TA114

IC index

Device

used to test / activate EGR valves. Supplied with plugs for most valves.

SEA VS926

for Diesel High Pressure Pump IC index

SEA VS216

SPECIAL OFFER

SEA PP100

Voltage probe (6–24 V) (video) IC index

SEA PP1

Thermal imaging camera

Temperature range -20°C to 300°C (±2°C), screen size: 52 mm, memory: Micro 4 GB SD (max. 25,000 photos) IC index

320

SEA TA125

provided with a single-channel oscilloscope function (video)

SEA TA305

Test Kit

in fuse sockets (MINI, STANDARD, MAXI 0 – 80 A)

Voltage probe (0–30 V)

with a multimeter

IC index

SEA TA304

Electronic voltage tester IC index

Current clamp IC index

15 features, with a clamp attachment and a pyrometer IC index

Needled measuring grippers IC index

Car multimeter

SEA VS912

SPECIALISED TOOLS

Sprocket puller

for high-pressure pumps in the following engines: 1.1CRDi, 1.4 CRDi, 1.4CRDi, 1.6 CRDi, 1.7 CRDi IC index

for VAG petrol engines with 1.2 / 1.4 TSi timing belts

Specialised tool

for high-pressure pumps, 2.5 D HYUNDAI; KIA IC index

0XAT0011

Locking and timing set IC index

NEW

0XAT0023

Tool kit

for the control of timing in the following engines: BMW N47 / N57 IC index

0XAT0309

Camshaft control kit Opel / Vauxhall 1.6 CDTi (camshaft timing chain) IC index

for the assembly and disassembly of crankshaft vibration dampers, 1.8 / 2.0 TSI / TFSI, after 2007, T10531

for the control of timing in the following engines: (OM 651) Mercedes 1.8 / 2.1 CDi

for the control of timing in the following petrol engines: 1.6 / 2.0 (M270) Mercedes A / B / C / CLA / E Class

0XAT1904

for the control of timing in the following engines: FORD / VOLVO 2.5T (camshaft timing belt)

NEW

DIESEL, Alfa Romeo 1.6D, 1.9D, 2.0D, 2.4D â&#x20AC;&#x201C; JTD / Multijet (on a belt)

NEW

for the setting of timing in M271 engines (petrol-based with a compressor, Mercedes)

NEW

0XAT1393

Tool kit

for the control of timing in the following engines: M156, Mercedes AMG IC index

NEW

0XAT1499

Tool kit IC index

NEW

0XAT0514

Camshaft control tools IC index

0XAT0404

Tool kit

IC index

NEW

0XAT0031

Tool kit IC index

0XAT0711

Tool kit IC index

NEW

0XAT0015

Specialised tool

IC index

NEW

0XAT1865

321

SPECIALISED TOOLS

Tool kit

for the control of timing in the following engines: VAG 1.2 / 1.4 TFSi 1.4 / 1.6 FSi (timing chain) IC index

NEW

84 mm (tetradecagonal), Mercedes 3.0 CDI

0XAT1833

NEW

wrenches: E18, E20, E24; M24, M26 (dodecagonal)

for petrol engines – Vauxhall/Opel/ Chevrolet 1.0, 1.2, 1.4 (belt drive)

NEW

0XAT1868

Puller for ball joints (bolts)

NEW

Ford: Mondeo ‚ 07- / Mondeo Kombi ‚ 07- / S-Max and Galaxy ‚06- Volvo: XC70 and V70 ‚07- / XC60 ‚08- / S60 and V60 ‚10

NEW

0XAT4018-05

Puller for rear-beam bushings in Fiat Panda, for dismounting and mounting bushings in the vehicle. IC index

Puller for rear arm bushings

322

NEW

0XAT9105

0XAT4398

0XAT1669A

Camshaft lock kit

IC index

for turning the crankshaft in Renault Magnum, TRUCK

IC index

NEW

jaw size: 45 mm

0XAT2170

Special attachment (1/2”) IC index

for Vauxhall/Opel, Chevrolet, Saab, Alfa Romeo, Fiat 1.4, 1.6, 1.8 – Belt drive

IC index

Tamping tool kit IC index

Camshaft lock kit IC index

0XAT1538B

Oil filter wrench IC index

NEW

0XAT4397

Set of 13 specialised sockets IC index

NEW

0XAT4812

NEW

MEASURING AND MOUNTING TOOLS

Belt drive elements in the engine chamber require special care when they are replaced. Moving parts in the system must be properly locked and the belt tension must be correctly adjusted. With the application of measuring instruments and special tools, the belt system will be efficient and, above all, safe. The Conti® TOOL BOX V01 Toolkit has been recognised as the most innovative product for daily workshop operation.

CONTI® BTT HZ BELT TENSION TESTER

CONTI® TOOL BOX

The non-contact CONTI® BTT HZ belt tension tester is primarily designed for manual tensioning systems as well as automatic tensioning units where car manufacturers also require measurements to be made. Thanks to this solution, there is no risk of cords being damaged. This device is easy to use, accurate and works according to the most up-to-date methodology: measuring the vibration frequency of vibrating or V-ribbed belts in Hz.

The professional CONTI® TOOL BOX is specially designed to conduct the proper replacement of timing belts in popular European cars. It contains locking tools and pins for locking crankshaft and camshafts, stethoscope to identify noise sources and universal wrench.

IC index: 6779873000

CONTI® TOOL BOX V01 The professional CONTI® TOOL BOX V01 special tool-kit for changing camshaft belts, predefined for Volkswagen engines with the highest quality and precision. The kit includes tools intended to lock camshaft, crankshaft, injection pump units, etc. In this way, car workshops and service centres have everything they need within easy reach. Advantages of the kit: – top-quality special tools; – favourable price of the kit compared to the purchase cost of individual tools; – the kit’s content is based on ContiTech’s mechanics and specialists’ experience.

IC index: 6503700000

CONTI® TOOL BOX V03 The Citroen and Peugeot bet drive requires special attention, especially in the case of the valve drive – it is necessary to comply with all the instructions provided by the vehicle manufacturer. Thanks to the up-to-date CONTI® TOOL BOX V03 special tool-kit, the replacement of belt elements in camshaft drive and auxiliary systems can be conducted quickly and properly by mechanics. The kit includes locks and locking shanks for crankshaft and camshaft, camshaft support unit, and a crankshaft wheel puller. An instruction manual in many languages has been added with tool specifications, their original numbers and applications in vehicles.

IC index: 6758824000

CONTI® TOOL BOX FOR ASIAN CARS The CONTI® TOOL BOX FOR ASIAN CARS allows mechanics to correctly change timing belts in Asian vehicles; it includes 26 mounting tools, e.g. a camshaft setting template, adjustment/blockage shanks and camshaft locking tools. The scope and application of all the tools are detailed in the appropriate specification in order to easily and quickly identify the necessary tool.

IC index: 6576476000

CONTI® UNI-TOOL ELAST – UNIVERSAL TOOL FOR MOUNTING ELASTIC BELTS The CONTI® UNI-TOOL ELAST is a high-quality universal tool used for assembling and removing elastic V-ribbed belts in single and dual belt systems. This device can be used many times in a wide range of vehicles, including with flat belt pulleys with no groove.

IC index: 6557237000

CONTI® TOOL BOX V02 The CONTI® TOOL BOX V02 is designed to run service for camshaft timing and auxiliary drive systems in popular Renault engines. The kit tools allow for fast and reliable belt replacements. They include: locks and locking shanks for crankshaft and camshaft units as well as a camshaft support wrench. The clear instruction manual in many languages with tool descriptions, their original numbers and applications in vehicles makes it possible to appropriately select tools for a given engine by mechanics. The product is packed in a secure suitcase.

IC index: 6758823000

CONTI® TOOL BOX V04 The new CONTI® TOOL BOX V04 is designed for the correct replacement of belt drive systems in popular Opel and Ford engines. Thanks to the application of appropriate special tools, mechanics can be sure that a given timing system is repaired and adjusted correctly. The kit includes, among others, high-pressure pump blockades, locks and locking shanks for crankshaft and camshaft units, camshaft support wrench, and a camshaft puller. An instruction manual has been added with tool lists in many languages, their descriptions, original numbers and application in vehicles.

IC index: 6758825000

CONTI® TOOL BOX OAP The CONTI® TOOL BOX OAP 12-part tool-box contains a set of socket wrenches for the assembly of one-way OAP / OAD alternator clutches. It is suitable for many popular vehicles and is adapted to our most recent clutches.

IC index: 6503999000

CONTI® ELAST TOOL F01 – TOOL FOR MOUNTING ELASTIC BELTS The CONTI® ELAST TOOL F01 – for the replacement of elastic V-ribbed belts in Ford and Volvo engines – enables elastic V-ribbed belts (especially inner ones) to be replaced without any problems in the following cars, among others: Ford Focus, C-Max and Mondeo with 1.4 l/1.6 l petrol engines as well as Volvo S40, C30 and V50 with 1.6 l petrol engine. The device enables mounting inner belts with a water pump pulley.

IC index: 6757240000

IC index: 6776956000

CONTI® LASER TOOL FOR MEASURING THE ALIGNMENT OF BELT DRIVES UNIT FOR MEASURING THE LENGTH OF V-BELTS AND V-RIBBED BELTS This measuring unit is adapted to the following V-belts: AVP10, AVX10, AVP13, AVX13 and ribbed V-belts. Its measuring range is 360–2520 mm.

IC index: 6779009000

The CONTI® LASER TOOL quickly, reliably and accurately detect discrepancies in V-ribbed belt drives. Misalignment of pulleys commonly results in noises within the belt drive system or leads to the premature wear of the belt itself.

IC index: 6757610000

SPECIALISED TOOLS

Set of two suction cups

used to carry and mount car glass; mounting strap, lifting capacity: 60 kg, suction cup diameter: 115 mm IC index

0XAT5093

IC index

SPECIAL OFFER

intended for the rapid removal of glass, chips and dirt off car window ducts – 320 mm

0XAT5016-02

standard

0XAT5014

Set of hooks IC index

324

0XAT5017

used to keep side windows in a closed position

0XAT5018

Tool-kit

used to remove car glass IC index

(4 pcs) – extra long, length – 380 mm

0XAT5058

Suction cups IC index

Windscreen remover IC index

diameter: 120 mm, max. capacity in a horizontal position: 40 kg

0XAT5013

Scraper

0XAT5057

Double suction cup for car glass

with a quick blade release system

IC index

for car glass, diameter: 120 mm, max. capacity in a horizontal position: 10 kg IC index

Windscreen remover IC index

Suction cup

0XAT5046

Grips

for wire fastening – 2 pcs. IC index

0XAT5050A

SPECIALISED TOOLS

Stainless-steel device

length: 330 mm, used to insert wire when mounting the windscreen IC index

0XAT5020

Stainless-steel device

used to insert wire when mounting the windscreen IC index

0XAT5021

Windscreen remover with a short handle IC index

0XAT5015

Window pane cutter – 250 mm IC index

0XAT5022-01

Flat blades

for removing car windows, 13 mm, 3 pcs. IC index

0XAT5069-01

Flat blades

for removing car windows, 169 mm, 3 pcs. IC index

0XAT5069-03

Scraper

intended for the quick removal of glass, chips and dirt off car window ducts – 250 mm IC index

0XAT5016-01

Blades to remove window panes length: 18 mm, 25 mm, 38 mm IC index

0XAT5067

Window pane cutter

for removing car windows, 3 pcs. IC index

0XAT5068

Window pane cutter – 450 mm IC index

0XAT5022-02

Flat blades

for removing car windows, 16 mm, 3 pcs. IC index

0XAT5069-02

Tool for cutting car windows

20000 cycles/min, noise level: 79.8 db, weight: 0.8 kg IC index

RC6605

325

SPECIALISED TOOLS

1000 V insulated flat wrench

SUBJECT TO STOCK AVAILABILITY

(for hybrid and electric cars) 7 mm IC index

IC index

8 mm IC index

1000 V – 100 mm (for hybrid and electric cars)

12 mm

0XAT7700-07

3/8” insulated extension IC index

0XAT7700-12

0XAT7554A

14 mm

0XAT7700-08

IC index

0XAT7700-14

10 mm IC index

0XAT7700-10

Insulated cable cutter

1000 V (for hybrid and electric cars) IC index

0XAT7751

1000 V (for hybrid and electric cars)

0XAT7750

3/8” 1000 V, length: 201 mm (for hybrid and electric cars)

0XAT7553A

1000 V (for hybrid and electric cars) IC index

326

0XAT7555A

1000 V (for hybrid and electric cars)

0XAT7754

Insulated ratchet wrench 1/2” 1000 V, length: 233 mm (for hybrid and electric cars) IC index

3/8” insulated T knob

0XAT7752

Insulated cable cutter IC index

Insulated ratchet wrench IC index

1000 V (for hybrid and electric cars) IC index

Insulated cable cutter IC index

Insulated cable cutter

0XAT7553B

1/2” insulated T knob

1000 V (for hybrid and electric cars) IC index

0XAT7555B

SPECIALISED TOOLS

Kit – 3/8” insulated mixed tools 1000 V – 26 pcs. ( for hybrid and electric cars) IC index

0XAT7808

Kit – 3/8” insulated mixed tools

9 pcs., the kit contains: T 3/8” T knob, screwdrivers: PH 2x100 mm, 5.5x125 mm, caps: 7, 8, 10, 12, 14 mm (for hybrid and electric cars) IC index

0XAT7810

SPECIAL OFFER

Kit – 1/2” insulated mixed tools

1000 V – 23 pcs. (for hybrid and electric cars) IC index

Kit – insulated mixed tools

1000 V – 8 pcs., cable knife, flat wrenches: 10, 12, 14 mm, combiners with a long nose 150 mm, hexagon socket 150 mm, screwdrivers: PH 2x100 mm, 5.5x125 mm (hybrid and electric cars) IC index

Kit – isolated flat wrenches

1000 V – 5 pcs., sizes: 7, 8, 10, 12, 14 mm (for hybrid and electric cars) IC index

0XAT7700

3/8” 1000 V insulated cap (for hybrid and electric cars) 7 mm IC index

0XAT7550-07

8 mm IC index

0XAT7550-10

1000 V – 11 pcs. ratchet wrench 1/2”, T knob 1/2”, extension: 125 mm, caps: 10, 12, 13, 14, 17, 19, 22, 24 mm (hybrid and electric cars) IC index

0XAT7559

1/2” 1000 V insulated cap (for hybrid and electric cars) 10 mm IC index

0XAT7551-10

IC index

19 mm IC index

0XAT7551-19

22 mm

0XAT7551-12

IC index

0XAT7551-22

24 mm

0XAT7551-13

IC index

0XAT7551-24

14 mm

0XAT7550-12

14 mm IC index

Kit – 1/2” isolated socket wrenches

13 mm

12 mm IC index

0XAT7811

12 mm

0XAT7550-08

10 mm IC index

0XAT7809

IC index

0XAT7551-14

17 mm

0XAT7550-14

IC index

0XAT7551-17

327

ELECTRIC TOOLS AND MACHINERY

NEW

INDEX

NAME

VOLTAGE [V]

EARTHING

PROTECTION LEVEL

IMP.W-1K IMP.W-1 IMP.WR-1 IMP.G-1 IMP.GR-1 FAZER 777

Plug Plug Plug Socket Socket Tester / Probe

230 230 230 230 230 Up to 500V

YES YES YES YES NO

IP-44 IP-44

230V extension cables

INDEX

TYPE

KIND

VOLTAGE [V]

LENGHT [M]

CABLE TYPE

IMP.PS-320/1.5M.B IMP.PS-320/3M.B IMP.PS-320/5M.B IMP.PS-33/42LS.3M IMP.PS-420/1.5M.B IMP.PS-420/3M.B IMP.PS-420/5M.B IMP.PS-530/1.5M.B IMP.PS-530/3M.B IMP.PS-530/5M.B IMP.PS-530LS/3M.B

Home Home Home Home Home Home Home Home Home Home Home

Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket Multi-socket

230 230 230 230 230 230 230 230 230 230 230

1.5 3 5 3 1.5 3 5 1.5 3 5 3

2G 1 2G 1 2G 1 3G 1 2G 1 2G 1 2G 1 3G 1 3G 1 3G 1 3G 1

NO. OF SOCKETS 230V CABLE INSULATION [PCS.] MATERIAL 3 Rubber 3 Rubber 3 Rubber 7 Rubber 4 Rubber 4 Rubber 4 Rubber 5 Rubber 5 Rubber 5 Rubber 5 Rubber

EARTHING

SOCKET TYPE

NO NO NO YES NO NO NO YES YES YES YES

E E E E/J E E E E E E E

230V extension cables

INDEX

TYPE

KIND

VOLTAGE [V]

LENGHT [M]

CABLE TYPE

KG.01.1.3G.32.20.52 KG.01.1.3G.32.30.52 KG.01.1.3G.32.40.52 KG.01.1.3G.32.50.52 LENA 304118 LENA 304156 PZ-4Z/OTMM.3X1.5/15M.P PZ-4Z/OTM.3X1.5/25M.P PZ-4Z/OT.3X1.5/40M.P PZ-4Z/OT.3X1.5/50M.P PS-2PE 20M PS-2PE 30M PS-2PE 40M

Specialised Specialised Specialised Specialised Standard Standard Garden Garden Garden Garden Garden Garden Garden

Drum Drum Drum Drum Drum Drum Drum Drum Drum Drum Cable Cable Cable

230 230 230 230 230 230 230 230 230 230 230 230 230

20 30 40 50 20 40 15 25 40 50 20 30 40

3G 1.5 3G 1.5 3G 1.5 3G 1.5 3G 1 3G 1 3G 1.5 3G 1.5 3G 1.5 3G 1.5 2G 1 2G 1 2G 1

400V 3-phase extension cables

NO. OF SOCKETS 230V [PCS.] 4 4 4 4 4 4 4 4 4 4 2 2 2

PROTECTION LEVEL IP44 IP44 IP44 IP44

IP20 IP20 IP20 IP20

CABLE INSULATION MATERIAL Polyurethane Polyurethane Polyurethane Polyurethane Rubber Rubber PVC PVC PVC PVC PVC PVC PVC

YES YES YES YES YES YES YES YES YES YES

NEW

INDEX

TYPE

VOLTAGE [V]

MAX. CURRENT

KIND

LENGHT [M]

CABLE TYPE

KG.12.1.3G.52.10.52 KG.12.1.3G.52.20.52 KG.12.1.3G.52.30.52 KG.12.1.3G.54.10.52 KG.12.1.3G.54.20.52 KG.12.1.3G.54.30.52

Specialised Specialised Specialised Specialised Specialised Specialised

400 400 400 400 400 400

16 16 16 32 32 32

Only Cable Only Cable Only Cable Only Cable Only Cable Only Cable

10 20 30 10 20 30

5G 1.5 5G 1.5 5G 1.5 5G 2.5 5G 2.5 5G 2.5

NO. OF SOCKETS 400V PROTECTION LEVEL [PCS.] 2 IP44 2 IP44 2 IP44 2 IP44 2 IP44 2 IP44

Nawijak

328

FUSE

INDEX

NAME

VOLTAGE [V]

KIND

CABLE LENGTH [M]

IMP.NAW.D IMP.NAW.M IMP.NAW.RECZNY

Nawijak Nawijak Nawijak

230 230 230

Reel Reel Reel

50 40 50

NUMBER OF SOCKETS 230V [PCS.] 4 4 None

CABLE INSULATION MATERIAL Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane

FUSE YES YES NO

46,1 kg

230 V (AVR)

15 hours

41,5 kg

230 V (AVR)

50 Hz

KS200

Weight

Voltage

Frequency

INDEX

Case

Protection against rain, snow, frost, sun, wind. Resistant to solar rays (UV), acid rain, bird droppings. Protection against dust and dirt, extends the life of the generator set. Fits all models of KS7000, KS 10000 generators

Case

Transportation kit

suitable for KS7000, KS10000

Details

KSCOVER20

50 Hz

230 V (AVR)

45,4 kg

15 hours

0,6 l

15 l

2 х 16 А

KS 210, 4–stroke

PB95/LPG

manual

7 HP

2,6 kW

3 kW

KS3000G

Description

KSCOVER10

50 Hz

15 hours

0,6 l

Oil tank capacity

Working time without refuelling at 50%

2 х 16 А

15 l

2 х 16 А

KS 210, 4–stroke

PB95

manual/electro

7 HP

2,6 kW

3 kW

KS3000E

15 l

Fuel tank capacity

Sockets

KS 210, 4–stroke

PB95

Fuel

Engine model

7 HP

manual

2,6 kW

Rater power

Engine power

3 kW

Max. power

Starting-up

KS3000

INDEX

50 Hz

230 V (AVR)

69,2 kg

17 hours

1,1 l

25 l

1 х 16 А; 1 x 32 А

KS 390, 4–stroke

PB95

manual

13 HP

5 kW

5,5 kW

KS 7000

50 Hz

230 V (AVR)

76,2 kg

17 hours

1,1 l

25 l

1 х 16 А; 1 x 32 А

KS 390, 4–stroke

PB95

manual

13 HP

5 kW

5,5 kW

KS7000E

50 Hz

230 V (AVR)

77,2 kg

17 hours

1,1 l

25 l

1 х 16 А; 1 x 32 А

KS 390, 4–stroke

PB95/LPG

manual/electro

13 HP

5 kW

5,5 kW

KS7000ЕG

50 Hz

230 V (AVR)

76,8 kg

17 hours

1,1 l

25 l

1 х 16 А; 1 x 32 А

KS 390, 4–stroke

PB95

manual/electro/auto

13 HP

5 kW

5,5 kW

KS7000EATS

POSSIBILITY TO CONNECT INVERTOR POSSIBILITY TO CONNECT INVERTOR WELDER WITH MAXIMUM WELDER WITH MAXIMUM CURRENT 200A CURRENT 200A

50 Hz

230 V/400 (AVR)

80,8 kg

17 hours

1,1 l

25 l

50 Hz

230 V/400 (AVR)

81,8 kg

17 hours

1,1 l

25 l

1 x 16A(400V); 1 x 32A(230V)

KS 390, 4–stroke

PB95

manual/electro

13 HP

5 kW

5,5 kW

KS7000E-1/3

50 Hz

230 V (AVR)

85,5 kg

15 hours

1,2 l

25 l

1 х 16 А; 1 x 32 А

KS 440, 4–stroke

PB95

manual/electro

18 HP

7,5 kW

8 kW

KS10000E

„Könner & Söhnen” is a brand specializing in the production of alternating current generators. This is our main product. This approach has resulted in creating from scratch devices of excellent quality. The process of devices assembly, which are delivered to the European market and North American markets, takes place in factories under the constant supervision of German quality controllers. All current-generating units are tested at every stage of production. Our products meet both European and international quality and performance standards. We pay particular attention to the level of pollution and noise emissions.

50 Hz

230 V/400 (AVR)

82,3 kg

17 hours

1,1 l

25 l

KS 390, 4–stroke 1 x 16A(230V); 1 x 16A(400V)

KS 390, 4–stroke

unleaded petrol 95

manual/electro/auto

13 HP

5 kW

5,5 kW

KS7000EATS3

1 x 16A(230V); 1 x 16A(400V)

PB95

manual/electro

13 HP

5 kW

5,5 kW

KS7000E3

MOŻLIWOŚĆ PODŁĄCZENIA SPAWARKI INWERTOROWEJ Z MAKSYMALNYM PRĄDEM 200A

50 Hz

230 V (AVR)

88 kg

15 hours

1,2 l

25 l

50 Hz

230 V (AVR)

89,2 kg

15 hours

1,2 l

25 l

1 x 16A(230V); 1 x 16A(400V)

KS 440, 4–stroke

PB95

manual/electro/auto

18 HP

7,5 kW

8 kW

KS10000EATS3

50 Hz

230 V / 400 V (AVR)

95 kg

15 hours

1,2 l

25 l

1 x 16A(400V); 1 x 32A(230V)

KS 440, 4–stroke

PB95

manual/electro

18 HP

7,5 kW

8 kW

KS10000E-1/3

Our current-generating units are characterized by: - Reinforced steel frame ø 28 mm - Automatic overload protection - Shutdown system with low oil level - Anti-vibration system - Easy start - Automatic voltage regulator (AVR) - OHV gasoline overhead gasoline engine - Large fuel tank capacity with built-in indicator - Low noise - Electric start (optional) - Automatic commissioning system (optional) - Same power for 1 and 3 phases thanks to VTS (optional)

50 Hz

230 V (AVR)

89,2 kg

15 hours

1,2 l

25 l

KS 440, 4–stroke 1 x 16A(230V); 1 x 16A(400V)

KS 440, 4–stroke

PB95

manual/electro

18 HP

7,5 kW

8 kW

KS10000E3

1 x 16A(230V); 1 x 16A(400V)

PB95

manual/electro/auto

18 HP

7,5 kW

8 kW

KS10000EATS

NEW

ELECTRIC TOOLS AND MACHINERY

329

ELECTRIC TOOLS AND MACHINERY

Glue Gun 930

The kit includes: 12 coloured Dremel glue sticks, 7 mm 3 x universal glue sticks for low temperature, 7 mm 3 x universal glue sticks for high temperature, 7 mm IC index

F0130930JA

Voltage Two temperature levels Weight

100–240 V 105 / 165 °C 0.20 kg

Engraver tool-kit

The kit includes: 1 x diamond engraving tip 2 x replaceable carbide engraving bits Creative engraving templates IC index

F0130290JJ

Moto-Saw precision saw

The kit includes: 1 x metal saw blade (MS53) 2 x fine-grained saw blade for fine cuts in wood (MS52) 2 x universal saw blade (MS51) IC index

Voltage Input rated power Weight

230 V 35 W 0.31 kg

220–240 V 70 W 1.10 kg

VersaTip Burner / Soldering gun / Heat gun

The kit includes: Soldering tin Soldering sponge + sponge box Soldering tip Shrinking tip Melting tip for shape forming Paint-removal tip Hot-processing cutter Wood-burning cutter Metal storage box IC index

Voltage Input rated power Weight

F013MS20JA

F0132000KA

Weight

0.135 kg

VersaFlame Burner / Soldering gun / Heat gun Universal set of accessories EZ SpeedClic The kit includes: Soldering tin Deflector Soldering sponge + sponge box Catalyser Soldering tip Flame tube Metal storage box IC index

The universal EZ SpeedClic accessories kit contains 70 high-quality original Dremel accessories, including EZ SpeedClic accessories, which can be exchanged quickly and easily. SpeedClic is a unique Dremel system for quick change of accessories in rotary tools. With this set of accessories you can do a lot of work in many various materials including cutting, abrasion, grinding. Suitcase enables convenient storage of Dremel accessories. INDEX IC

F0132200JA

Weight

0.227 kg

DREMEL® 3000 multifunctional tool

The kit includes: 25 high-quality drilling, grinding and cutting accessories, including the EZ SpeedClic kit Attachment – soft roller (225) Unique handle for easy tool storage Capacious and durable case with a removable accessory tray IC index

F0133000JS

Voltage Input rated power Weight

330

2 615 E72 5JA

230 V 130 W 0.55 kg

DREMEL® 8100 battery-operated multifunctional tool The kit includes: 15 high-quality Dremel accessories Attachment – precision work grip (577) Soft bag IC index

F0138100JC

Battery voltage Battery capacity Charging time Weight

7.2 V 1.5 Ah 1h 0.413 kg

ELECTRIC TOOLS AND MACHINERY

Miniature battery-operated GSR Mx2Drive INDEX IC

0 601 9A2 101

Small impact battery-operated screwdriver / drill GSB-12V INDEX IC

Max. Torque (hard/soft screwdriving)

10 / 5 Nm

RPM at idle (1. / 2. gear)

0 – 150 / 0 – 580 min-1

Battery voltage

3.6 V

Max. Torque (hard/soft screwdriving) RPM at idle (1. / 2. gear) Max. number of impacts Range of drill handle fixing min./max. Drill’s spindle thread Battery voltage Battery capacity

Small battery-operated screwdriver / drill + 15 bits

BS 14.4 INDEX IC

10.8 V 2 x 2,0 Ah 17 Nm 34 Nm

Battery voltage Battery capacity Max. torque at soft screwdriving Max. torque at hard screwdriving

Brushless battery-operated screwdriver / drill GSR 18 V-EC

0 601 9E8 101

Max. Torque (hard/soft screwdriving) RPM at idle (1. / 2. gear) Range of drill handle fixing min./max. Drill’s spindle thread Battery voltage Battery capacity

60 / 31 Nm 0 – 600 / 0 – 1.900 min-1 1,5 / 13 mm 1/2" 18 V 2 x 5,0 Ah

SB 18 L

14,4 V 2 x 2,0 Ah 20 Nm 40 Nm

Brushless battery-operated screwdriver / drill GSB 18 V-EC INDEX IC

Brushless battery-operated screwdriver / drill INDEX IC

6.02 206.51 0

6.00 079.51 0

Battery voltage Battery capacity Max. torque at soft screwdriving Max. torque at hard screwdriving

INDEX IC

30 / 15 Nm 0 – 380 / 0 – 1.300 min-1 19.500 min-1 1 / 10 mm 1/2" 12 V 2 x 1,5 Ah

Battery-operated screwdriver / drill

PowerMaxx BS Basic 10,8V INDEX IC

0 601 9F3 006

0 601 9E9 104

Max. number of impacts Max. torque (hard/soft screwdriving) RPM at idle (1. / 2. gear) Range of drill handle fixing min./max. Drill’s spindle thread Battery voltage Battery capacity

28.500 min-1 60 / 31 Nm 0 – 600 / 0 – 1.900 min-1 1,5 / 13 mm 1/2" 18 V 2 x 5,0 Ah

Small battery-operated impact wrench GDR 18 V-Li MF INDEX IC

0 601 9A1 007

6.02 317.50 0

Battery voltage Battery capacity Max. torque at soft screwdriving Max. torque at hard screwdriving RPM at idle Max. number of impacts

18 V 2 x 2,0 Ah 25 Nm 50 Nm 450 / 1800 /min 27000 /min

Battery capacity RPM at idle (1. / 2. gear) Max. torque Rated number of impacts Battery voltage Tools handle

2 x 5,0 Ah 0 – 750 / 2.800 min-1 160 Nm 0 – 3.200 min-1 18 V Inner hexagonal socket 1/4”

331

ELECTRIC TOOLS AND MACHINERY

Cordless impact wrench GDS 18 V-EC 250 INDEX IC

0 601 9D8 104

Battery capacity RPM at idle Max. torque Rated number of impacts Battery voltage Tools handle

2 x 5,0 Ah 0 – 2.400 obr./min 250 Nm 0 – 3.500 min-1 18 V Outer square pin 1/2”

SSW 18 LTX 600

6.02 198.65 0

Battery voltage Battery capacity RPM at idle Max. number of impacts Max. torque Tools handle

18 V 5.2 Ah 0 - 1600 /min 2200 /min 600 Nm Outer square pin 1/2” (12,7mm)

W 18 LTX 125 QUICK

6.02 174.61 0

0 601 9B1 30A

Battery capacity RPM at idle Max. torque Rated number of impacts Battery voltage Tools handle

2 x 5,0 Ah 0 – 1.900 obr./min 650 Nm 0 – 2.100 min-1 18 V Outer square pin 1/2”

Cordless angular grinder GWS 18-125 V-LI INDEX IC

Cordless angle grinder INDEX IC

GDS 18V-LI HT INDEX IC

Cordless impact wrench INDEX IC

Cordless impact wrench

0 601 93A 30B

Battery capacity RPM at idle Battery voltage Disc diameter

2 x 4,0 Ah 10.000 min-1 18 V 125 mm

Miniature cordless angle grinder GWS 12V-76

NEW

without accessories INDEX IC

0 601 9F2 000

with battery and charger INDEX IC

Battery capacity RPM at idle Battery voltage Disc diameter

2 x 4,0 Ah 8000 /min 18 V 125 mm

Cordless saber saw GSA 18 V-LI INDEX IC

0 601 64J 00B

Blade stroke Battery capacity Battery voltage Stroke frequency (1. / 2. gear)

332

Battery capacity RPM at idle Battery voltage Disc diameter

2 x 3 Ah 19.500 min-1 12 V 76 mm

Cordless squeezer for cartridges and sachets KPA 10.8 600 INDEX IC

28 mm 2 x 5,0 Ah 18 V 2.400 - 2.700 min-1

0 601 9F2 00B

6.02 117.00 0

Battery voltage Battery capacity Extrusion pressure Holder size Speed at idle For models

10.8 V 1 x 2 Ah 4413 N 600 ml 2 - 10 mm/s Cartouches / Foil bags

ELECTRIC TOOLS AND MACHINERY

Cordless vacuum cleaner GAS 18V-Li (set without battery and charger) INDEX IC

0 601 9C6 200

Battery voltage Wieght without battery Container gross capacity Max. volume flow (turbine) Max. negative pressure (turbine)

18 V 1.3 kg 0,70 l 10,0 l/s 60 mbar

LED lamp – 25 hours of constant work GLI 18V-300 INDEX IC

0 601 4A1 100

Wieght without battery Lenght Width Height Battery voltage Lighting technology Light flux Operation time, 1Ah (12V-10,8) Example working time

0.3 kg 116,0 mm 78,0 mm 163,0 mm 14,4–18 V LED 300 lm 300 min/Ah 6Ah,18V = 30H

GDS 18 E

0 601 444 000

Rated power Max. torque at hard screwdriving Max. torque at soft screwdriving Tools handle Rated rpm rpm at idle

500 W 250 Nm 160 Nm Outer square socket 1/2” 500 – 1.300 min-1 800 – 1.900 min-1

0 601 4A1 000

Weight without battery Length Width Height Battery voltage Lighting technology Light flux Operation time, 1Ah (12V-10,8) Example working time

0.15 kg 55,0 mm 51,0 mm 182,0 mm 12 V LED 300 lm 180 min/Ah 15Ah = 15H

Glue gun KE 3000

6.18 121.00 0

Insert diameter Maximum performance Preheating time Processing temperature

11 mm 18 g/min ca. 6 min ca. 200 °C

Glue inserts

11 x 200 mm (kit 0,5kg) INDEX IC

6.30 886.00 0

Impact wrench 230V GDS 24

0 601 434 108

Rated power Max. torque at hard screwdriving Max. torque at soft screwdriving Tools handle Rated rpm

800 W 600 Nm 300 Nm Outer square socket 3/4” 950 min-1

Saber saw

GSA 1100 E

SSE 1100

0 601 64C 800

Rated power Stroke frequency at idle Weight Blade stroke

INDEX IC

Saber saw INDEX IC

GLI 12V-300

INDEX IC

Impact wrench 230V INDEX IC

LED lamp – 9 hours of constant work

INDEX IC

1.100 W 0 – 2.700 min-1 3,6 kg 28 mm

6.06 177.50 0

Rated power Useful power Stroke frequency at idle Blade stroke

1100 W 550 W 0 - 2600 /min 28 mm

333

ELECTRIC TOOLS AND MACHINERY

Lightweight eccentric grinder

Eccentric grinder

FSX 200 INTEC INDEX IC

SXE 3150

6.09 225.50 0

Disc size RPM at idle Rated power Oscillation aplitude

INDEX IC

125 mm 11000 /min 240 W 2.7 mm

Handy brushless eccentric grinder SXE 150 BL

Disc size RPM at idle Rated power Oscillation aplitude

NEW

150 mm 4000 - 12000 /min 310 W 3 mm

Heat gun GHG 600 CE INDEX IC

Oscillation 2,5mm INDEX IC

6.00 444.00 0

0 601 942 103

6.15 025.00 0

Oscillation 5 mm INDEX IC

6.15 050.00 0

Disc size RPM at idle Rated power

Rated power Working temperature Air consumption Continuous temperature regulation Air flow regulation

150 mm 4000 - 10000 /min 350 W

Heat gun

Double table grinder

GSA 1100 E INDEX IC

2.000 W 100 – 600 °C 350 – 550 l/min YES 2-level

NEW

GBG

0 601 944 703

150 mm INDEX IC

0 601 27A 300

200 mm INDEX IC

Rated power Working temperature Air consumption Continuous temperature regulation Cold air supply, 50 ⁰C Air flow regulation

2.300 W 50 – 660 °C 250 – 500 l/min YES YES continuous

Metal cutter 0 601 B28 000

Disc size RPM at idle Disc thickness Disc hole diameter Granulation Rated power RPM rated

NEW

GCD 12 JL INDEX IC

0 601 27A 400

150 mm / 200 mm 3.000 min-1 20 / 25 mm 20 / 32 mm 24 60 350 W / 600W 3.000 / 3.600 min-1

Small angle grinder GWS 7-115

Without regulation INDEX IC

0 601 388 106

6-step regulation INDEX IC Cutting efficiency at angle 0⁰ (rectangle) Cutting efficiency at angle 45⁰ (rectangle) RPM at idle Disc size Disc hole diameter Rated power

334

158 x 80 mm 85 x 85 mm 1.500 min-1 305 mm 25,4 mm 2.000 W

0 601 388 203 Rated power RPM at idle Output power Spindle thread size Disc size Weight

720 W 11.000 min-1 300 W M 14 115 mm 1,9 kg

ELECTRIC TOOLS AND MACHINERY

GWS 7-125 JH angular grinder with an RSP switch lock IC index

0 601 388 108

disc size rated power output power rpm at idle rotation control spindle thread weight

125 mm 720 W 300 W 11.000 rpm NO M14 1.9 kg

GWS 7-115 JH angular grinder with an RSP switch lock IC index

0 601 378 793

disc size rated power output power rpm at idle rotation control spindle thread weight

125 mm 850 W 490 W 2.800–11.000 rpm YES smooth M14 1.9 kg

GWS 11-125 JH angular grinder with an RSP switch lock IC index

0 601 79D 002

disc size rated power output power rpm at idle rotation control spindle thread weight

125 mm 1.100 W 740 W 11.500 rpm NO M14 2.2 kg

GWS 15-125 CIE angular grinder with speed control and an RSP switch lock IC index

0 601 79H 002

W820 angular grinder IC index

disc size rated power output power rpm at idle rotation control spindle thread weight

125 mm 1.700 W 1.010 W 2.800–11.500 rpm YES 6 levels M14 2.4 kg

125 mm 820 W 510 W 11.000 rpm NO M14 2 kg

W1080 angular grinder IC index

6.01 237.00 0

disc size rated power output power rpm at idle rotation control spindle thread weight

125 mm 1080 W 650 W 10.500 rpm NO M14 2.1 kg

WEV 15-125 QUICK angular grinder INDEX IC

6.00 468.00 0

Rated Power RPM at idle Output power Spindle thread Disc size Rotation control Weight

1550 W 2.800 - 11.000 /min 940 W M 14 125 mm YES, smooth 2,5 kg

A powerful multifunctional tool with an accessory kit with the possibility of cutting windows INDEX IC

disc size rated power output power rpm at idle rotation control spindle thread weight

6.01 233.00 0

0 601 231 101

Rated power Output power rpm at idle Left & right oscillation angle Weight

550 W 550 W 8.000 – 20.000 min-1 1,8 ° 1,6 kg

335

ELECTRIC TOOLS AND MACHINERY

GWS 20-230 JH angular grinder

WX 2200 angular grinder

with a RSP switch lock IC index

IC index

0 601 850 M03

disc size rated power output power rpm at idle rotation control spindle thread weight

230 mm 2.000 W 6.600 rpm NO M14 5.1 kg

6.00 397.00 0

disc size rated power output power rpm at idle rotation control spindle thread weight

230 mm 2.200 W 1.500 W 6.600 rpm NO M14 5.8 kg

”Expert for Inox” stainless-steel cutting disc (AS 60 T INOX BF, STRAIGHT) Package: 25 pcs.

size: 115x1 mm IC index

size: 125x1 mm

2 608 600 545

IC index

size: 230x1,9 mm

2 608 600 549

IC index

2 608 600 711

”Expert for Metal” bent grinding disc (A30T BF)

Size: 125 mm Package: 10 pcs. IC index

Size: 230 mm Package: 10 pcs.

2 608 600 223

IC index

2 608 600 228

Leaf grinding disc (X571) Best for Metal 125 mm Package: 10 pcs.

Grain size: 40 IC index

2 608 606 922

Grain size: 60 IC index

2 608 606 923

Grain size: 80 IC index

2 608 606 924

Grain size: 120 IC index

336

2 608 607 320

ELECTRIC TOOLS AND MACHINERY

SBE 760 W impact drill with a toothed handle IC index

6.00 841.50 0

Hammer-drill SDS UHEV 2860-2 Quick INDEX IC

6.00 713.50 0

with Futuro Plus handle INDEX IC

6.00 841.00 0

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

760 W 370 W 0–1.200 / 3.200 rpm 24 Nm 0–58.000 impacts/min 1.5–13 mm 2.3 kg

GSB 21-2 RCT 2-speed impact drill with a self-locking grip IC index

0 601 19C 700

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

1.300 W 695 W 0–900 / 3.000 rpm 43 Nm 0–15.300 / 51.000 impacts/min 1.5–13 mm 2.9 kg

GSB 13 RE impact drill with a toothed handle IC index

0 601 217 100

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

600 W 301 W 0–2.800 rpm 10.8 Nm 0–44.800 rpm 1.5–13 mm 1.8 kg

GSB 16 RE impact drill with a toothed handle IC index

0 601 14E 600

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

750 W 380 W 0–2.800 rpm 23 Nm 0–47.600 impacts/min 1.5–13 mm 2.2 kg

Max energy of single impact (acc. EPTA): Max. number of impacts: Rated power: Chamfer: Tool handle:

3.4 J 4500 /min 1100 W 28 mm SDS-plus

SDS-plus GBH 2-26 DFR rotary-impact hammer-drill IC index

0 611 254 768

nominal power hammering energy number of impacts rotation speed tool grip

800 W 2.7 J 0–4.000 0–900 SDS-plus

SBE 650 W impact drill with a toothed handle IC index

6.00 671.00 0

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

650 W 320 W 0–2.800 rpm 12.2 Nm 0–44.800 impacts/min 1.5–13 mm 1.8 kg

SBE 710 W 2-speed impact drill with the Futuro Plus handle IC index

6.00 862.81 0

rated power output power rpm at idle maximum torque number of impacts at idle mounting range weight

710 W 420 W 0–1.000 / 3.100 rpm 28 Nm 600 / 1.800 impacts/min 1.5–13 mm 2.7 kg

337

ELECTRIC TOOLS AND MACHINERY

86-piece set

30 drills (for: metal, stone, wood) + 40 bits (Philips, Pozidriv, Flat, Inbus, Torx) + 4 depth limiters + 8 socket wrenches + countersink + holder + template + hex wrench. The kit is packed in a specialdesigned, high-quality, durable container. IC index

CYL-9 Multi Construction Robust Line 4 / 5 / 6 / 6 / 8 / 10 / 12 mm

2 607 010 543

1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm

6.27 153.00 0

1 / 1.5 / 2 / 2,5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13 mm

2 607 018 727

125-mm cutting disc for NOVORAPID steel A46-T-BF/41 Package: 25 pcs. IC index

338

6.27 156.00 0

6.16 271.00 0

25-piece HSS-R drill bit set

1 / 1.5 / 2 / 2,5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13 mm

6.27 152.00 0

25-piece HSS-G drill bit set

1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13 mm IC index

25-piece HSS-G drill bit set IC index

IC index

19-piece HSS-G drill bit set IC index

1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm

6.26 708.00 0

Multi-purpose drill set IC index

19-piece HSS-TIN drill set

6.27 154.00 0

19-piece HSS-CO drill set

1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm IC index

6.27 157.00 0

14-piece HSS hole saws for metal, stone, wood and plastics

dimensions: 19.0 / 22.0 / 25.0 / 29.0 / 35.0 / 38.0 / 44.0 / 51.0 / 57.0 / 64.0 / 76.0 mm IC index

2 607 018 390

ELECTRIC TOOLS AND MACHINERY

Steel wire brushes for grinders

POT TYPE, KNOTTED WIRE 100 mm IC index

6.23 711.00 0

POT TYPE, CORRUGATED WIRE 100 mm IC index

BENT CIRCUMFERENTIAL TYPE, KNOTTED WIRE 100 mm

6.23 719.00 0

IC index

6.23 803.00 0

STRAIGHT CIRCUMFERENTIAL TYPE, KNOTTED WIRE 125 mm IC index

6.26 815.00 0

Steel wire brushes for drills and front grinders – 6-mm pin

Straight, circumferential type, corrugated wire (75x0.3 mm) IC index

6.30 550.00 0

Pot corrugated wire (75x0.3 mm) IC index

Brush type, corrugated wire (25x0.3 mm)

6.30 552.00 0

IC index

6.30 554.00 0

HSS-G DIN 338 metal drills index

packaging (pcs.)

diameter (mm)

working length (mm)

overall length (mm)

2 608 595 051

2 608 595 055

2 608 595 058

2 608 595 059

2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 6,5 7 7.5 8 8.5 9 10 10.5 11 11.5 12 12.5 13 14 15 16

2 608 595 053

2 608 585 920

2 608 595 062

2 608 595 064

2 608 595 066

2 608 585 927

2 608 595 068

2 608 595 070

2 608 595 071

2 608 595 072

2 608 595 073

2 608 595 075

2 608 595 077

2 608 595 078

2 608 595 079

2 608 595 080

2 608 595 081

2 608 595 082

2 608 595 083

2 608 585 593

2 608 585 594

2 608 585 595

6.3

101

6.3

101

109

117

125

133

142

101

151

101

151

101

151

108

160

114

169

120

178

339

ELECTRIC TOOLS AND MACHINERY

Professional thermal imaging camera GTC 400 C INDEX IC

Wallscanner detector NEW

0 601 083 101

3,5" -10 °C do +400 °C ±3,0 °C 0.1 °C <50 mK 160x120 px 19200 4 batteries 1,5 V 1 GBA Power source and working time LR6(AA), 12V battery, 1 GBA 10.8V battery Data transmission Micro USB Wi-Fi Protection against dust and water IP 53 MIN/MAX alarm YES Autoscale / Manual scale YES Edition option YES Superimposing YES Function Image in Image YES Integrated digital camera YES Regulated emission degree YES Automatic designating hot YES and cold points

D-tect 120 INDEX IC

0 601 081 300

Screen size Measurement range IR measurement accuracy Resolution Thermal sensitivity (NETD) IR sensor size Number of measurement points

GLM 30 Laser distance meter Simple, compact length measurements for professionals – One button for all features – intuitive and easy measurements – Compact model – fits in every pocket – the AutoSum feature automatically sums up any measurement values – High quality – protection against dust, water splashes and impacts at the construction site ISO-certified laser distance meter – Clear measurement values thanks to the illuminated 3-line display INDEX IC

0 601 072 500

Detected materials Max detection depth Max measurement depth in steel Max measurement depth in copper Max measurement depth in live wires Max measurement depth in wooden structures Accuracy Additional functions

340

635 nm, < 1 mW 0.15–30.00 m 2 ±2 mm 2 LR03 (AAA) 1,5 V batteries IP54 1m 0.09 kg

120 mm 120 mm 120 mm 60 mm 38 mm ± 10 mm Dual Power (10.8 V / 4 1.5 V batteries LR6 AA); automatic Center Finder scale with object center indicator

GIC 120 C battery-operated inspection camera – Convenient inspection and documentation in hard-to-reach locations – The ”Up is Up”™ feature makes orientation easier thanks to automatic image rotation – Photos and videos can be transferred directly from the Micro USB cable or the Micro SD memory card to record critical areas. – The Quick Connector technology makes it quicker and easier to change the camera cable and store the tool – Compact housing – Digital zoom facilitates recognising details – Camera cable with a length of 120 cm with a magnet hook and mirror – Bright LED illuminates dark areas INDEX IC

Laser diode Measurement range Laser class Measuring accuracy Power supply Protection against water and dust Protection against falls Weight

Plastic pipes filled with water, ferrous metals, non-ferrous metals, wooden structures, live wires

0 601 241 201

Battery voltage Display size Display resolution Camera head diameter Camera cable length LED light levels

10.8 V 3.5" 320 x 240 px 8.5 mm 120 cm 3

ELECTRIC TOOLS AND MACHINERY

Self-propelled welding machine

rated power air flow air flow control temperature temperature control weld width speed weight

UNIPLAN E 30mm for the construction of tarpaulins in trucks IC index

114.318

TRIAC AT blower IC index

TRIAC ST blower

141.314

IC index

rated power air flow air flow control temperature temperature control weight

2.300 W 150–300 l/min YES smooth 20–620°C YES smooth 30 mm 1.0–7.5 m/min 11.5 kg

1.600 W 120–240 l/min YES smooth LCD 40–620°C YES smooth LCD 1 kg

141.227

rated power air flow air flow control temperature temperature control weight

1.600 W 240 l/min none 40–650°C YES potentiometer 1 kg

Accessories for the production and repair of tarpaulins (for Triac AT/ST)

Pressure roller 40 mm (silicon) IC index

140.160

IC index

107.133

(silicon) IC index

Slotted nozzle 40 mm

perforated

Pressure roller 80 mm 106.974

Slotted nozzle 30 mm

bent 45° IC index

128.535

Pressure roller made of brass, round model IC index

106.972

Slotted nozzle 20 mm

bent 90°, perpendicularly-slid-on tip IC index

107.124

Slotted nozzle 40 mm IC index

107.132

Slotted nozzle 20 mm bent 60° IC index

Slotted nozzle 20 mm IC index

105.487

Weld tester IC index

138.314

107.125

Nozzles for welding plastics and carpets (for Triac AT/ST)

Pipe nozzle fi5mm IC index

Combining nozzle Welding nozzles IC index

106.996

with a round wire

Welding nozzles with a triangular wire

Welding nozzle with 4x12 strips IC index

100.303 3 mm IC index

5,7 mm

106.989

4 mm IC index

107.139

IC index

106.992

7 mm

106.990

IC index

106.993

5 mm IC index

106.991

341

ELECTRIC TOOLS AND MACHINERY

Double-disc grinder IC index

Double-disc grinder with a polishing disc

PROMA BKL-1500

rated power voltage rotation speed disc size disc opening weight

IC index

375 W 230 V 2.850 rpm 150x25 / 150x40 mm 12.7 mm 11.5 kg

rated power voltage rotation speed disc size disc opening weight

Double-disc grinder IC index

IC index

550 W 230 V 2.850 rpm 200x25 / 200x40 mm 16 mm 20 kg

IC index

550 W 230 V

IC index

PROMA BKS-2500/P

PROMA PPS-170H

NEW

PROMA B-1316F/230

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Spindle cone (Mk)

600 230 180–2740 1590 II

Table-top drill

550 / 900 W 400 V 170 mm 120 mm 70 mm 40/80 m/min 160 kg

Table-top drill IC index

PROMA E-1516B/230

Power demand (W) Voltage (V) Head – handle (mm) Max. drilling diameter (mm) Spindle cone (Mk) Rotation range (min-1) Rotation control levels Spindle travel (mm) Spindle extension (mm) Table dimension (mm) Base dimension (mm)

750 230 1–16 20 II 180–2 740 12 80 195 300 x 300 500 x 285

Column drill

PROMA B-1316B/400

power demand voltage maximum cutting diameter (mm) 90° 45° 60° cutting speed weight

125 mm 90 mm 56 mm 20–29–51 m/min 95 kg

Column drill

342

Stand

PROMA PPK-115UH

power demand voltage maximum cutting diameter (mm) 90° 45° 60° cutting speed weight

IC index

1100 W 400 V 2.950 rpm 250 x 32 mm 32 mm 45 kg

Band saw for metal

550 W; automatic hydraulic pressing force; quick-mounting clamp; arm retreat system

IC index

PROMA BKS-2500

rated power voltage rotation speed disc size disc opening weight

Band saw for metal IC index

375 W 230 V 2.850 rpm 150x20 12.7 mm 10.3kg

Double-disc grinder

PROMA BKL-2000

rated power voltage rotation speed disc size disc opening weight

PROMA MBKL-1500L

600 400 3–16 16 II 180–2 740 12 80 165 310 420 x 245

IC index

PROMA E-1516B/400

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Spindle cone (Mk)

750 400 180–2740 1065 II

ELECTRIC TOOLS AND MACHINERY

Column drill IC index

Table-top drill

PROMA E-2020F/400

1 500 400 5–20 32 IV 120–3 480 12 120 260 425 x 475 580 x 450

Table-top drill

with the threading feature IC index

PROMA BZ-25B/400

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Threading for Spindle auto-travel Spindle cone (Mk)

1 100 400 290–2 150 1 127 M14 no III

Table-top drill IC index

1 100 400 290–2 150 1 127 none no III

Drilling and milling machine IC index

PROMA FP-25

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Threading Spindle auto-travel Spindle cone (Mk)

PROMA E-1516BVL/400

750 400 1–16 20 II 150–2 150 stepless 75 180 290 x 290 450 x 270

Table-top drill IC index

PROMA E-1720F/400

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Spindle cone (Mk)

IC index

750 400 180–2740 1065 II

1 100 400 80–2 180 1 090 none no III

PROMA FP-25/P

PROMA BV-25FB/400

Power demand (W) Voltage (V) Rotation range (min-1) Auto-travel range (mm / rev.) Total height (mm) Table tilt Max. spindle-base distance Spindle cone (Mk)

1100 400 300–1540 0.08/ 0.14/ 0.1/ 0.12 1180 +/-45° 645 mm III

Drilling and milling machine IC index

Drilling and milling machine base PROMA FP-25 IC index

IC index

Table-top drill with Auto-travel

PROMA BV-25B/400

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Threading Spindle auto-travel Spindle cone (Mk)

with a variator and laser pointer

PROMA FP-45P

Power demand (W) Voltage (V) Rotation range (min-1) Total height (mm) Threading Spindle auto-travel Spindle cone (Mk)

1 500 400 80–1 250 1 400 none no IV

Drilling and milling machine base PROMA FP-45P IC index

PROMA FP-45/700

343

ELECTRIC TOOLS AND MACHINERY

Mini-lathe with digital readout IC index

PROMA SM-300D

Power demand (W) Voltage (V) Ø turned piece over bed (mm) Ø turned piece over support (mm) Length of processed element (mm) Spindle clearance (mm) Rotation range (min-1) Weight (kg) Digital readout Base as a standard

PROMA SM-300E

Lathe IC index

300 230 180 110 300 20 100–2 500 40 yes no

Lathe IC index

NEW

PROMA SPB-550/400

300 230 180 110 300 20 100–2 500 40 no no

600 400 250 150 550 20 125–2 000 130 no no

Combi lathe

Power demand (W) Voltage (V) Ø turned piece over bed (mm) Ø turned piece over support (mm) Length of processed piece (mm) Spindle clearance (mm) Rotation range (min-1) Weight (kg) Digital readout Base as a standard Spindle cone (Mk) Sleeve cone (Mk) Optional milling / drilling device Rotation range (min-1) Table dimension (mm) Spindle extension (mm) Spindle travel (mm) Max. spindle-table distance (mm) Max. drilling diameter (mm) Max. milling diameter (mm)

(lathe, milling and drilling machine) IC index

PROMA SKF-800

550 400 420 290 800 28 160–1 360 249 no no IV III 120–3 000 475 x 160 285 110 215 22 28

Lather stand SKF-800 IC index

Lathe IC index

PROMA SPA-700P

550 400 270 145 700 25 116–1 620 150 no yes

Lathe IC index

PROMA SPC-900PA+O

PROMA SKF-800/P

Ask for accessories for your equipment 344

1 100 400 300 178 830 38 65–1 810 450 yes yes

ELECTRIC TOOLS AND MACHINERY

Machine for processing blocks and engine heads. Model: S7M

Machine for processing engine valves. Model: VR10

Specification:

Control: manual Weight: 1637 kg Working table dimension: 1270 x 530 mm Spindle – rotation speed: 350 up to 1200 rpm Milling diameter: 360 mm Cutter travel (horizontal): 1000 mm Cutter travel (vertical): 150 mm Max. insert – machine base distance: 635 mm Spindle adjustment range: 100–1 mm Rapid travel range: 4 mm Machine dimensions: 1143D x 1397W x 1905H mm Space requirements: 1170D x 1900W x mm H Space for transport: 1702D x 1956W x 2083H mm Electrical requirements: 210–240 V, 15 A, 50/60 Hz, 1 Ph Compressed air requirements: 14 l/min; 6 bar Colour: RAL9002 IC index

ROT S7M

NEW

Control: manual Machine weight: 305 kg Base cabinet: option Valve stem diameter range (with a standard holder): 4–14 mm Valve stem length range (with a standard holder): 54–260 mm Valve head diameter: 20–102 mm Total valve length: 89–317 mm Valve plug angular range 15°–50° Friction wheel diameter 178 mm Grinder wheel bottom diameter: 76 mm Grinder wheel speed: 3450 rpm, 60 Hz 2850, 50 Hz Valve rotation speed: 250 rpm Coolant tank capacity (with a cabinet): 20 l Grinding machine engine: 0.375 Kw, AC Oil pump performance: 0.02 KW – 20 LPM Spindle engine: 0.062 Kw, DC Valve stem diameter range (with an optional holder): 3.5–19 mm Stem length range (with an optional holder): 31–260 mm Coolant tank capacity (without cabinet – only – VR7): 5 l Electrical requirements: 230 V 10 A, 50/60 Hz, Compressed air requirements: 6 bar Colour: RAL9002 IC index

ROT VR10

The final price depends on the final configuration of the unit and the selection of accessories by the purchaser.

NEW Machine for processing valve seats and guides. Model: SG7MTS

NEW Machine for testing tightness pressure in engine heads. Model: VLS 1200

Specification:

Control: automatic Weight: 818 kg Spindle travel on the table: 473 mm Spindle – conicality: R1 – Quick exchange with an automatic lock Spindle – diameter: 56 mm Spindle – rotation speed: 40 up to 400 rpm Spindle engine: 0.75 Kw Valve seat diameter range: 14–76 mm Head dimension (with a 360 degree handle): 700L x 230W x 150H mm with regulation up to 800 mm Vertical spindle travel: 184 mm Horizontal head working range: 736 mm Head working range: 54 mm Head tilt (on each side of the horizontal zero): 15 degrees Roller movement with clamp: 121 mm Machine dimensions: 813D x 965W x 1829H mm Electrical requirements: 210–240 V, 50/60 Hz, 15 A, 1 Ph Compressed air requirements: 6 bar Colour: RAL9002 IC index

Length: 1855 mm Width: 1000 mm Height 1520 mm Net machine weight: 508 kg Tank capacity: 320 l Air pressure range: 0–10 bar Temperature range: 5–90°С IC index

TV1200

Movement:

Up / down movement: 400 mm Up / down movement (together): 15/10 s Rotation speed: 10 rpm Test piece dimensions: Length: 1200 mm Width: 400 mm Height 350 mm Weight: up to 250 kg Heater power (three levels): 3–6–9 kW Heating time from 14° to 70° (filled and closed tank): 3 hour Cooling-down time from 70° to 14° (filled and closed tank, heating – off )

ROT SG7MTS

The final price depends on the final configuration of the unit and the selection of accessories by the purchaser.

345

WORKSHOP LAMPS / ELECTRICITY

MINI SLIM

COB LED workshop lamp, two lighting levels: 100/200 lm, SMD LED front light, IP30 IC index

SG03.5610

LED Star MAG workshop lamp (NEW MODEL), 2-in-1, 7+1 SMD LED

SG03.5400

Star MAG3 LED workshop lamp (NEW MODEL), COB LED + SMD

MINIFORM-2

workshop lamp, pocket LED COB, two light levels, powerful magnet IC index

SG03.5060

LED workshop lamp, two light levels: 150/300 lm + UV light for leak detection

SG03.5408

LED workshop lamp

COB LED portable workshop lamp, 2 lighting levels 500/1000 lm, powerful magnet, built-in powerbank, IP65 IC index

SG03.5620

I-ZONE head light

2 lighting levels: 60/100 lm, IP30, wide lighting angle IC index

348

SG03.5426

SG03.5000

MIDIFORM

COB LED workshop lamp, two light sources, powerful magnet

SG03.5421

NEW UNIFORM

NEW UNIFORM workshop lamp, COB LED, 2 lighting levels, dust resistant, waterproof, IP65, with a hook (also belt-attached), magnet, docking station (charger), battery indicator IC index

STAR

SG03.5059

STAR FLEX

IC index

UV-FORM IC index

9 x SMD LG LED 300 lm workshop lamp, 5-m cable, IP40, the most versatile basic lamp

IC index

SG03.5401

SG03.5612

STARLINE IC index

NEW STARMAG 3 IC index

COB LED workshop lamp, two lighting levels: 250/500 lm, SMD LED front light, IP30 IC index

NEW STARMAG IC index

SLIM

SG03.5407

LED COB â&#x20AC;&#x201C; SUPERFORM

LED workshop lamp, 6 W, 230 V, 600 lm, 5-m cable, IP54 IC index

SG03.5406

STARLIGHT

wired workshop lamp, fluorescent lamp IC index

SG03.5005

WORKSHOP LAMPS / ELECTRICITY

MINI MAX

Portable garage lamp MINI MAX COB LED: two lighting degrees 450/900 lumen, built-in powerbank, durable and strong casing, IP54 IC index

SG03.5430

MATCHPEN

Pocket lamp MATCHPEN COLOUR MATCH for sprayers, pen-alike, for detailing and colour matching IC index

Headlamp I-MATCH 2 COLOUR MATCH for sprayers, for detailing and colour matching, two light temperatures: 4500K & 6500K

LED motion-activated front light, 60/120 lm, IP54 + LED 100-lm pocket flash-light, IP54 IC index

SG49.0140

FLASH MINI

LED flash-light, 50 lm, 10-hour lighting, IP54 IC index

SG03.5102

LINE LIGHT

workshop, battery-operated LED lamp, with a bracket under the hood with a telescopic holder, 48 x SMD LED, two lighting levels: 500/1000 lm IC index

NEW

SG03.5240

Garage lamp MINI MAG COB LED: 120 lumens, frontal light 50 lumens, strong magnet, hook, IP20 (without charger; USB cable included)

NEW

Garage lamp SUNMATCH 2 COLOUR MATCH for sprayers for detailing and colour matching, two light temperatures: 4500K & 6500K

SPECIAL OFFER

NEW

SG03.5445

COLOUR MATCH KIT 2 Set of lamps COLOUR MATCH 2 for sprayers, for detailing and colour matching, two light temperatures: 4500K & 6500K IC index

NEW

SG03.5403

SUNMATCH 2

IC index

SG03.5446

SENSOR 2 + FLASHPEN

MINI MAG

IC index

SG03.5117

I-MATCH 2

IC index

NEW

SG49.0142

I-VIEW front flash-light 2 lighting levels: 80/160 lm, IP65, wide lighting angle IC index

SG03.5026

MAG PEN 2

workshop, pocket, battery-operated LED lamp, two light sources IC index

SG03.5108

NOVA 30

LED COB workshop lamp, 30 W, 230 V, shock-resistant, HIGH CRI COB IC index

SG03.5042

349

WORKSHOP LAMPS / ELECTRICITY

LINEA LED

Hermetic fixture, moisture resistant Flux: 4000 lm Power: 36 W, natural light colour Length: 120 cm IC index

LHT052

Power: 5.5 W Flux: 470 lm Handle: E14 Equivalent: 40 W Colour: warm

LL098

Power: 5 W Flux: 470 lm Handle: E27 Colour: warm Equivalent: 40 W

LL085P

LED ILLUMINATOR Power: 10 W Flux: 750 lm Colour: cool Equivalent: 60 W Tightness class: IP65

HFL010C

Power: 30 W Flux: 2250 lm Colour: cool Equivalent: 180 W Tightness class: IP65

HFL020C

IC index

LED Tuba Economy Glass LED T8 120 cm Power: 18 W Light flux: 1700 lm Distribution angle: 270 degrees Thread type: G13 Natural colour: 4100 K Voltage: 220–240 V Applied instead of a 36-W fluorescent lamp IC index

LL032

LED ILLUMINATOR

Power: 20 W Flux: 1500 lm Colour: cool Equivalent: 120 W Tightness class: IP65 IC index

Power: 4 W Flux: 310 lm Handle: GU10 Colour: warm Equivalent: 30 W

IC index

LED ILLUMINATOR

LHT051

LUMAX LED BULB GU10

IC index

LUMAX LED BULB E27

IC index

Hermetic fixture, moisture resistant, ideal for a workshop pit Flux: 1650 lm Power: 18 W Temperature: 4000 K Length: 65 cm IC index

LUMAX LED BULB E14

IC index

LUMAX LED LINEA

HFL030C

LED STRIP

Power: >4.8 W/m Flux: 3–4 lm Tightness class: IP65

LT105 warm white IC index

352

LS001

cold blue IC index

LS002

PAINT AND BODY EQUIPMENT

RSBOX 9000 varnish spray booth, oil 220 kW 6.90 x 3.9 x 2.8

RSBOX 9000 is a spray varnish booth on a mounting base with no need for construction works, intended for water-based and conventional varnishes. The booth complies with the European directives (it is CE-certified). As a standard, booths are available in the following internal sizing: 6.9 m long, 3.9 m wide, 2.8 m high. The external dimensions are as follows: 7 m long, 5.45 m wide and 3.48 m high. Their usable, 3-leaf door usable is 2.75 m high and 3.0 m wide, equipped with a safety lock. Staff service doors (0.8x2 m) with a safety lock to open the door if the pressure in the booth is exceeded. Generator type: 8200/8400. Drive engines: 4-field 3-phase. Air flow: 7.5 kW, turbo fan, direct drive. Air extraction: 7.5 kW, turbo fan, direct drive. Asynchronous electric engine. Insulation class F: IP54. Electricity demand with lighting: 16 kW 3 Ph+N 400 V 50 Hz Airflow/extractor capacity: 25000 Nm3/h Airflow: 25000 Nm3/h (extraction) Heating system: Riello RG5D two-phase oil burner Burner power: 237 kW Varnishing temperature: 20Ë&#x161;C Drying temperature: max. 60Ë&#x161;C (with recirculation). Full cycle system via the booth. Four-way high-performance heat exchanger. Ventilation ducts Airflow: Ventilation duct led out to a height of 5 m from the floor, topped with an elbow. Chute: Ventilation duct led out to a height of 6 m from the floor topped with an elbow or a diffuser. Control: Special control panel. Equipped with a pressure gauge. Power supply: 24 V transformer. Top lighting: 32 LED fluorescent lamps, 16 W each, reinforced type, daylight colour, evenly arranged on both sides of the booth at an angle of 45 degrees, under the supply plenum. Bottom lighting: (8 fixings, 4 per each side), 32 LEDs, 10 W each. Fixings made of IP 54 safety glass. Power: 1100 lux. The application of LED lighting provides savings at a level of 1 kW/h. Construction and insulation: wall panels 50 mm thick, tongue-groove combined, insulated with self-extinguishing mineral wool insulation. Panels painted white. Floor: fully grated. Filtration system (pre-filter): Inlet / pocket-type, fast-extinguishing, F1 class, G3 filtration grade. Ceiling filter: V500 material, selfextinguishing, F1 class, F5 filtration grade. Floor filter (final): Glass Paint Stop, self-extinguishing, F1 class, F3 filtration grade. Final filter: turbine covering, Paint Stop material self-extinguishing , F1 class, F3 filtration grade IC index

RSBOX9000

353

PAINT AND BODY EQUIPMENT

Glass-fibre putty

Universal putty

lightweight, yellow, volume: 1 l IC index

0RS006-1L

IC index

Carbon-fibre putty 0RS011-1L

IC index

black

0RS603-310ML

Colourless varnish

HS Scratch Resistant 2:1 set, 1.5 l

0RS207-1.5L

0RS702-1L

new colour: amber

0RS706-1L

IC index

0RS702-1L

black IC index

354

for securing closed profiles (ML), transparent, volume: 1 l IC index

new colours: white

0RS602-310ML

0RS009-1.8KG

Agent

0RS601-310ML

grey

IC index

with aluminium filling, volume: 1.8 kg IC index

0RS707-1L

0RS002-1.8KG

Filling putty

0RS003-1.8KG

grey, volume: 1 l

white

IC index

UBS car-body protection agent

sealing mass, volume: 310 ml

IC index

0RS001-1.8KG

fine-grained, yellow, volume: 1.8 kg

Polyurethane IC index

anti-corrosion protection feature, volume: 8 kg

Finishing putty

black, volume: 1 l IC index

Filling putty

filling type, yellow, volume: 1.8 kg

0RS708-1L

Acrylic primer

filling feature, 4:1 grey standard set, 1.25 l IC index

0RS101-1.25L

Acrylic primer

Wet-to-Wet feature, 6:1 grey set, 1.05 l IC index

0RS103-1.05L

Diluent

for acrylic products, universal, 5 l IC index

0RS402-5L

PAINT AND BODY EQUIPMENT

Yellow masking tape

pack of 8 pcs., width: 19 mm, length 40 m – up to a temperature of 80°C IC index

0RS-40-19MM

pack of 6 pcs., width: 25 mm, length 40 m – up to a temperature of 80°C IC index

IC index

pack of 3 pcs., width: 50 mm, length 40 m – up to a temperature of 80°C IC index

0RS-40-50MM

Fast wax for extra protection / cleaning in an 500-ml atomiser, with a microfibre cloth included in the kit.

0RS802-500ML

Hand-wash gel for very dirty hands Especially recommended for varnishing. It removes varnish, resin, priming material and filler stains. IC index

0RS905

0RS-20-12MM

IC index

Fast wax

IC index

0RS-20-9MM

width: 12 mm, length: 20 m

0RS-40-30MM

0RS-40-38MM

0RS-20-6MM

IC index

0RS-40-25MM

pack of 4 pcs., width: 38 mm, length 40 m – up to a temperature of 80°C

width: 6 mm, length: 20 m

width: 9 mm, length: 20 m

pack of 5 pcs., width: 30 mm, length 40 m – up to a temperature of 80°C IC index

Acrylic double-sided tape

width: 19 mm, length: 20 m

0RS-20-19MM

IC index

width: 25 mm, length: 20 m IC index

0RS-20-25MM

Universal polishing paste

versatile polishing paste used to remove scratches of any type and derived from any kind of varnish. IC index

0RS803-1KG

Professional hand-wash paste with micro-granules 500 ml

IC index

0RS906

5l IC index

0RS907

10 l IC index

0RS908

355

PAINT AND BODY EQUIPMENT

Varnish primer

Fast-drying primer for covering prepared and unprepared surfaces made of wood, metal, aluminium, glass and stone. It has excellent coating and anti-rust properties. Easy for wet and dry sanding (starting from 400 grit). For use with all varnish systems.

Black, Vol. 500 ml IC index

Varnish primer with rust remover

Fast-drying filling primer with excellent covering properties, for filling minor irregularities on prepared and unprepared surfaces made of wood, metal, aluminium. The filling primer has excellent filling / adhesive properties and prevents rust formation. The MoTip Primer Filler is easy for dry and wet sanding (starting from 400 grit) and suitable for use with all varnish systems. Vol. 500 ml IC index

004052

004062

Grey, Vol. 500 ml IC index

004054

Spray putty

Epoxide grey primer

Vol. 400 ml

Vol. 500 ml

Fast-drying spray putty with excellent filling and covering properties, for filling minor irregularities on prepared and unprepared surfaces made of wood, metal, aluminium. This spray putty is characterised by excellent adhesion and prevents rust formation. The MoTip Spray is easy for dry and wet sanding (starting from 400 grit).

IC index

004064

Universal 1-component epoxide primer, it perfectly adheres to any surface and protects steel, galvanised-steel, aluminium and anodised aluminium surfaces against corrosion. Fastdrying product. It spreads out evenly. Wet-on-wet application, if needed. Good water-proofing against moisture. Only for use by professional varnishers.

IC index

Epoxy primer

This epoxide primer perfectly adheres to any surface and protects steel, galvanised steel, aluminium and anodised aluminium surfaces against corrosion. Fast-drying product. It spreads evenly. Wet-on-wet application, if needed. Good water-proofing against moisture.

004120

Universal varnish

Fast-drying acrylic varnish with excellent coverage and adhesion to coated surfaces. For application on prepared and unprepared surfaces made of wood, metal, glass and plastic. It is resistant to petrol, chemicals and weather conditions as well as fading / UV radiation.

Vol. 500 ml IC index

MDP001

White, mat, Vol. 500 ml IC index

004002

Black, gloss, Vol. 500 ml IC index

WASH Primer

1K Wash Primer is a universal, 1-component primer varnish to be applied directly on metal. It adheres to all metal substrates and surfaces which were partially sanded to core metal. Excellent protection against corrosion. Weldable. After sanding, 1K Filler or 2K Filling Primer can be applied to the surface. Fast-drying product. Ideal for spot repairs. For professional use only. Vol. 500 ml IC index

356

004005

White, gloss, Vol. 500 ml IC index

004004

Black, mat, Vol. 500 ml IC index

004006

Varnish primer for plastics

Quick-drying, transparent primer for plastics. Ideal for use on prepared and unprepared surfaces made of various plastics. The MoTip primer for plastics is characterised by excellent adhesion and is, without the need for sanding, suitable for use with all varnish systems. Vol. 500 ml IC index

004063

004122

PAINT AND BODY EQUIPMENT

Varnish for engine painting

Varnish with good filling properties for covering engine blocks. It is resistant to scratches and shocks, petrol, chemicals and atmospheric conditions. It is elastic and resistant to temperature changes. It prevents corrosion. It is characterised by a lasting gloss. It reduces the risk of dirt settling. Vol. 400 ml

Red IC index

Black

004091

Blue IC index

IC index

Aluminium

004092

IC index

004093

Green

004094

IC index

004095

Heat-resistant varnish

Resistant to high temperatures up to 800°C. The varnish is ideally suited to cover rough surfaces which are exposed to very high temperatures. It is resistant to petrol, chemicals and weather conditions. Vol. 400 ml Dark anthracite IC index

004030

IC index

004034

IC index

004038

Rallye silver wheel rim **

Quick-drying acrylic varnish with a lasting gloss to decorate and repair wheel rims (made of steel, light metals) as well as hubcaps. It is characterised by high coverage, excellent adhesion and good surface hardness. The spray is also resistant to wear and scratches.

IC index

004032

Anthracite

004036

IC index

004037

Red

Grey

Beige IC index

004031

White

Brown IC index

Silver

Black

004039

IC index

004040

Tyre marker

White marker for highlighting letters on tyres. Vol. 12 ml IC index

30000

Vol. 600 ml IC index

604007

Rallye grey primer

Fast-drying primer for covering prepared and unprepared wood, metal, aluminium, glass and stone surfaces. The primer has excellent covering and filling properties and also provides protection against rust. The primer is easy for dry and wet sanding (starting from 400 grit) and suitable for use with all varnish systems. Vol. 500 ml ** The picture shows a limited version, which may change over time.

IC index

604054

** The picture shows a limited version, which may change over time.

357

PAINT AND BODY EQUIPMENT

Wheel rim varnish

White, Vol. 500 ml IC index

Silver, Vol. 500 ml

004004

IC index

004008

Black mat, Vol. 500 ml

Black gloss, Vol. 500 ml IC index

004007

Gold, Vol. 500 ml

004018

IC index

004019

Varnish for brake callipers

This varnish for painting brake blocks has good filling properties and characterised by a lasting gloss. The varnish is resistant to scratches, shocks and petrol, chemicals and weather conditions, prevents rust and dirt settling. The MoTip Tuning Line spray for brake callipers is available in three colours.

Yellow, Vol. 400ml IC index

Blue, Vol. 400 ml

004097

IC index

004099

Red, Vol. 400 ml IC index

004098

Black structural varnish

This 1-component filling primer is a quick-drying universal varnish which adheres perfectly to any surface, provides corrosion protection and has filling properties on all metal surfaces. It can be applied with all standard water-based basecoats and 1- and 2-component topcoats. Depending on the applied layer thickness, it can be used as a primer and filler. This is the most suitable product for spot repairs. Only for use by professional varnishers.

Control varnish

Fast-drying black control varnish, for use as an aid in the sanding process. Vol. 500 ml IC index

004057

Vol. 500 ml IC index

004123

Colourless varnish

Quick-drying acrylic varnish with a permanent gloss to cover prepared and unprepared surfaces made of wood, metal, aluminium, glass, stone and various types of plastics. This colourless varnish is rustresistant and has excellent adhesion. It is resistant to scratches and shocks as well as petrol, chemicals and weather conditions. Vol. 500 ml IC index

358

004009

Transparent high-gloss varnish

1-component, transparent, fast-drying, high-gloss, UV-resistant product for application to all standard (solvent-based) basecoats. The ease of polishing combined with its spraying smoothness makes this paint most suitable for spot repairs. Only for use by professional varnishers. Vol. 500 ml IC index

004124

PAINT AND BODY EQUIPMENT

Glass cleaner

High-performance foam glass cleaner with a slightly alkaline pH. It degreases glass and effectively prevents dirt from sticking. Vol. 400 ml IC index

This product â&#x20AC;&#x201C; in the form of foam â&#x20AC;&#x201C; effectively refreshes and cleans velour upholstery and other fabrics. It has a pleasant subtle fragrance and effectively removes all dirt and stains. Vol. 400 ml

000706

IC index

Leather conditioner and cleaner

The product cleans and protects leather upholstery, gives shine and reduces dirt adhesion. Vol. 400 ml IC index

Upholstery cleaner

000708

000707

Plastic and rubber conditioner and cleaner

The product cleans and protects plastic and rubber car-body parts. It effectively restores the glare of plastic and rubber elements and protects them against weather conditions. Vol. 400 ml IC index

Tyre polishing foam

Silicone-based agent for polishing and refreshing car tyres. It protects them from weather conditions and restores their original colour. Vol. 400 ml IC index

000711

000709

Wheel-rim cleaner

Intensive cleaner for wheel rims. It guarantees quick-cleaning effects with no need for troublesome reaching rim nooks and crannies. Vol. 400 ml IC index

000713

359

PAINT AND BODY EQUIPMENT

Spray for V-belts

A spray with excellent adhesion is ideal to protect V-belts as well as to repair and prevent slippage. It increases viscosity when in motion, is easy to use and provides long-lasting protection. Its use delays wear and keeps V-belts in good condition. It is resistant to weather conditions. The product is equipped with a special nozzle which enables application of the product in various positions. The aerosol is equipped with an extra nozzle for easy application of the product in hard-to-reach places.

Spray against martens

Transparent spray with excellent adhesion which prevents damage to cables and wires by martens. Due to its unique, viscous protective coating, martens avoid sprayed surfaces. Thanks to the special formula, the spray can be applied even on moving parts. It gives long-lasting protection and is odourless. It is resistant to atmospheric conditions, weak acids and alkalis. The aerosol is equipped with an extra nozzle for easy application in hard-to-reach places. Vol. 500 ml IC index

090103

Vol. 500 ml IC index

090102

Impregnating spray

Protective spray for leather and textiles; it protects against moisture and dirt. Thanks to its unique formula, it forms an invisible protective coating which displaces water, allows breathing and at the same time effectively prevents re-adherence of dirt. The MoTip impregnation agent provides long-lasting protection and is easy to use. Vol. 500 ml IC index

Teflon

This spray grease with excellent adhesion and high viscosity is ideally suited for the lubrication of mechanical parts made of metal or plastic. The PTFE oil is characterised by excellent mechanical and thermal stability, is resistant to atmospheric conditions as well as weak acids and alkalis. The PTFE oil is water-proof and pH-neutral. It contains PTFE particles (polytetrafluoroethylene) to prevent wear and sticking. Resistant to temperatures between -30°C and + 160°C. The aerosol is equipped with an extra nozzle for easy application of the product in hard-to-reach places. Vol. 500 ml IC index

090203

090104

Repair zinc

Quick-drying repair spray with zinc content and excellent adhesion. It is used to repair minor damages on the surface of galvanised steel. This repair zinc does not fade, it is resistant to UV radiation, abrasion and scratches. It provides good coverage, has good surface hardness and is resistant to petrol, chemicals and weather conditions. Vol. 500 ml IC index

090105

Screw lubricant

Spray with high copper content which prevents wear and sticking of screws connections exposed to very high temperatures. This copper grease is characterised by high thermal stability and prevents corrosion. It is resistant to temperatures from -40°C to +1100°C. The aerosol is equipped with an extra nozzle for easy application of the product in hard-toreach places. Vol. 500 ml IC index

360

090301

PAINT AND BODY EQUIPMENT

Vaseline spray

Universal, transparent lubricant and preservative with excellent adhesion properties. The vaseline is waterproof, pH-neutral, resistant to weather conditions, acids and alkalis and has excellent anticorrosion properties. It protects surfaces against wear / adhesion and is resistant to temperatures ranging from -300°C to +1600°C. Vol. 500 ml IC index

Spray glue

Gluing agent for permanent and temporary application. It is designed for glueing paper, cardboard, wood, textiles and various types of plastics. The aerosol glue dries quickly and is easy to apply. For permanent bonding, apply the product on two surfaces to be glued together, allow them to dry and then press them tightly together. For temporary bonding, apply glue on one part, let it dry, then put together and squeeze tightly. Vol. 500 ml IC index

090302

090304

Mounting brakes

Metal-free grease with high thermal stability to prevent braking systems from clogging when mounted. The lubricant is resistant to chemicals, atmospheric conditions, water, salts and weak acids and alkalis. It has excellent adhesion and sprayability. It is suitable to mount brake systems; it also facilitates their disassembly in the future. The aerosol is equipped with an extra nozzle for easy application in hard-to-reach places. Vol. 500 ml IC index

Gasket remover spray

For quick and easy removal of dried glues and gaskets, as well as hardened sealing materials from automotive parts and machinery. The product has strong dissolving properties, it does not conduct electricity or cause corrosion. It guarantees optimal effects thanks to its high viscosity. It is easy to use and equipped with a directional nozzle. The product is equipped with a special nozzle which enables application of the product in various positions. Vol. 500 ml IC index

IC index

090405

This product prevents sticking of welding splinters at weld areas as well as their adjacent ranges. It is nonflammable; it does not contain silicone and does not cause corrosion. Thanks to its unique formula based on pure nitrogen, a high level of coverage is reached. It is slightly alkaline and can be removed with water. It is sprayed in the form of a mist and can be used in various locations. The product is equipped with a special nozzle which enables application in various positions.

IC index

Efficient tool to tackle problems with starting internal combustion engines. Fast operation. Based on ether. Inject the agent into the inlet channel of an air filter for a few seconds and restart the engine. Vol. 500 ml

Protection of welded places

Vol. 500 ml

090403

Quick-start

090310

090404

Spray for cleaning diesel particulate filters

Agent for loosening and removing ash deposits in particulate filter systems (diesel engines) without removing the filter. It is characterised by a very fast reaction time. It does not cause corrosion. It is solventfree and non-flammable. The aerosol is equipped with an extra nozzle for easy application of the product in hard-to-reach places and in different positions. Vol. 500 ml IC index

090515

361

PAINT AND BODY EQUIPMENT

Varnish for leather

Leather spray: the spray is suitable for the repair and renovation of leather surfaces in cars. It can also be used for vinyl and artificial leather. Available in several colours. Black, Vol. 200 ml IC index

Grey, Vol. 200 ml

004230

IC index

Beige / Grey, Vol. 200 ml IC index

004232

Beige, Vol. 200 ml IC index

004234

Beige / Brown, Vol. 200 ml

004231

IC index

004233

Car lamp renovation kit IC index

359248PL

Sprayplast

SPRAYPLAST can be used on all smooth, non-absorbent surfaces such as metal, aluminium, plastics, glass. It is resistant to oils, salts, greases and automatic car washes. Damages, i.e. scratches, can also be easily eliminated by painting them with SPRAYPLAST varnish. This varnish can also be used as a protective foil for entrance doors or the boot compartment, as a protective agent against splashes, for styling and beautifying purposes. Suitable for use on cars, trucks, motorcycles, bicycles, scooters, skateboards, roller skates, caravans, trailers and many other applications within the sphere of home and hobby. Vol. 400 ml

Vol. 375 ml

Black mat, Vol. 400 ml

IC index

388033

Black gloss, Vol. 400 ml

IC index

388040

White gloss, Vol. 400 ml

IC index

388057

Anthracite gloss, Vol. 400 ml

IC index

388064

Green gloss, Vol. 400 ml

IC index

388071

Orange gloss Vol. 400 ml

IC index

388088

Colourless gloss, Vol. 400 ml

IC index

388095

Blue gloss, Vol. 400 ml

IC index

412752

Red gloss, Vol. 400 ml

IC index

412776

Yellow mat, Vol. 400 ml

IC index

412783

362

IC index

388231

Black mat, Vol. 2x400 ml

IC index

388101

Black gloss, Vol. 2x400 ml

IC index

388118

White gloss, Vol. 2x400 ml

IC index

388125

Anthracite gloss, Vol. 2x400 ml

IC index

388132

Green gloss, Vol. 2x400 ml

IC index

388149

Orange gloss, Vol. 2x400 ml

IC index

388156

Colourless gloss, Vol. 2x400 ml

IC index

388163

Solvent, Vol. 375 ml

Vol. 2x400 ml

PAINT AND BODY EQUIPMENT

Wash systems for varnish guns dual-purpose wash system for products based on organic and aqueous solvents IC index

500050

RUPES SKORPIO 2 pneumatic vibratory and rotary sander, air consumption: 340 l/min, rotation speed: 0–11000 rpm, stroke: 6.0 mm, 150-mm working plate

3212776

AirPro electric polisher

electric polisher with variable speed control: 800–2200 rpm, power: 1200 W, polishing sponge included. IC index

BP-160

SATA JET 5000 HVLP with a 1.3 nozzle and rotary joint is a low-pressure spray gun designed for water- and diluentbased varnishing.

210450

Varnish spray gun

DDCARS, HVLP L-897, 1.3 nozzle with a 600-ml tank, working pressure: 1.5 bar, air consumption: 170 lt/min IC index

L-897

AirPro manual squeezer IC index

CG321

SA4818C5 with an extraction unit, stroke: 5 mm, rotation speed: 10000 rpm, weight (with a disc): 0.94 kg, TAIWAN SA4818C2.5, stroke: 2.5 mm IC index

SA4086C5

Air Pro car window cutter includes: a pneumatic cutter, 5 blades, 2 suction cups.

SA8604HK

Varnish spray gun

SATA JET 5000 RP with a 1.3 nozzle and rotary joint is designed for varnishing with acrylic and transparent products IC index

209718

Varnish spray gun

DDCARS, RP H827P, 1.4 nozzle with a 600-ml tank, working pressure: 3–4 bar, air consumption: 300 lt/min IC index

for glues and mass cartridges, 310 ml TAIWAN

203200

AirPro pneumatic sander

IC index

Varnish spray gun

IC index

(electric model) BR 65AE, power: 550 W, adjustable rotation speed: 3000–7000 rev/min, stroke: 5 mm, weight: 2 kg IC index

Vibratory and rotary sander

IC index

Vibratory and rotary sander

H-827P RP

AirPro pneumatic squeezer

for CG2033MCR-9 cartridges and sealing masses, 290–320 ml cartridges, 300–400 ml sausages IC index

CG2033MCR-9

363

PAINT AND BODY EQUIPMENT

SKORPIO 3 rotary-oscillatory sander pneumatic sander with a 150-mm disc, stroke: 3 mm IC index

3212783

glue – clamp plate, plate working stroke: 4.8 mm, plate dimensions: 70 x 400 mm, vibration frequency: 3000–7000 rpm, weight: 2.6 kg, power supply: 230 V, power: 550 W

3202200

LH 22 E angular polisher

rotation speed: 950–2000 rpm, max. working disc: 200 mm, weight: 3.3 kg, voltage: 230 V, power: 1020 W IC index

201300

Linear sander

footing: 70–445 mm, 5000 strokes/min, weight: 2.75 kg IC index

CP7268

oscillation: 5 mm, handle: 125-mm disc, rotation speed: 12000 rpm, weight: 0.79 kg, central dust extraction system, Velcro disc

CP3514

Mass extruder IC index

364

CP9885

electric sander with a 150-mm disc, stroke: 3 mm IC index

3203300

SS PF rotary-oscillatory sander

power: 350 W, weight: 3.6 kg, vibration frequency: 6000 1/min, max., working plate with clamps: 115x208 mm IC index

202100

Rotary-oscillatory sander

oscillation: 2.5 mm, handle: 150-mm disc, rotation speed: 12000 rpm, vibrations: <2.5 m/s2, central dust extraction system, Velcro disk

CP7225CVE

Rotary-oscillatory sander

oscillation: 5 mm, handle: 150-mm disc, rotation speed: 12000 rpm, weight: 0.83 kg, central dust extraction system, Velcro disc IC index

cartridges: 210x50 mm, steel tube, weight: 1.04 kg

3212786

ER03TE rotary-oscillatory sander

IC index

Rotary-oscillatory sander IC index

pneumatic sander with a 150-mm disc, stroke: 6 mm IC index

SL42AEV vibrating electric sander IC index

SKORPIO 3 rotary-oscillatory sander

CP7255CVE

Angular disc sander

max. 125 mm, 12000 rpm (max.), power: 0.6 kW, weight: 2.1 kg, light and handy, casing IC index

CP9121AR

PAINT AND BODY EQUIPMENT

3M kit

for sanding weld seams and cleaning hardto-reach bodywork areas; the kit includes a sander and abrasives (cubitron) IC index

battery-powered squeezer for cartridges and sachets (600 ml) + 1.5 Ah 10.8 V + LC 40 charger

6.02 117.00 0

Band file

pneumatic band file, band size: 10x330 mm, 16000 rpm, weight: 0.8 kg, TAIWAN IC index

SA4501A

pneumatic type, disc diameter: 75 mm, 15,000 rpm, weight with a disc: 0.72 kg, TAIWAN

SA4679P

with automatic shut-off feature, suitable for electric and pneumatic units, power: 1100 W, capacity: 18 l

SA-3018CEA

RUPES dust extractor

S145 EPL with automatic electric and pneumatic shut-off feature and 4-m suction hose, suction capacity: 165 m3/h, power: 1200 W, noise level: 67 DB IC index

HR2-T10C

3221110

Eccentric sander

FSX 200 Intec light eccentric sander, 240 W, in a case IC index

6.09 225.50 0

Groover / puncher

max. cut-out hole: 5 mm, weight: 1.15 kg

SA8550

Mini-polisher

pneumatic type, disc diameter: 75 mm, 2100 rpm, weight with a disc: 0.77 kg, TAIWAN IC index

Dust extractor

IC index

Mini-sander IC index

pneumatic metal-sheet spreader, 10 t

3M1642469

KPA 10.8 600 IC index

Sheet-metal spreader

SA4681P

RUPES dust extractor

S130PL with automatic electric and pneumatic shut-off feature and 4-m suction hose, suction capacity: 200 m3/h, power: 1200 W, noise level: 70 DB IC index

3221020

RUPES dust extractor

KS260EPS with automatic electricpneumatic shut-off feature, working station and 4-m suction hose, suction capacity: 260 m3/h, power: 2100 W, noise level: 72 DB IC index

3221300

365

PAINT AND BODY EQUIPMENT

Milling cutters for reaming car welds

Made in three variants. Reamers made of BOHLER S 705 steel (cobalt 5%) is the ’basic’ version. Reamers made of the same material (BOCHLER S 705, cobalt 5%) with an extra TIN Oerikon Balzers coating (providing greater resistance to abrasion and temperature) are the ’middle’ version. Reamers made of BOHLER S 500 steel (cobalt 8%) with an extra BALINIT FUTURA NANO coating are the ’top’ model.

IC index

Description

0XWA0050

Milling cutter, fi 8, for automotive welds, BOHLER S 705 steel, cobalt 5%

0XWA0051

Milling cutter, fi 8, for automotive welds, BOHLER S 705 steel, cobalt 5%, with TIN Oerikon Balzers coating

0XWA0052

Milling cutter, fi 8, for automotive welds, BOHLER S 500 steel, cobalt 8%, with FUTURA Nano coating

0XWA0053

Milling cutter, fi 10, for automotive welds, BOHLER S 705 steel, cobalt 5%

0XWA0054

Milling cutter, fi 10, for automotive welds, BOHLER S 705 steel, cobalt 5%, with TIN Oerikon Balzers coating

0XWA0055

Milling cutter, fi 10, for automotive welds, BOHLER S 500 steel, cobalt 8%, with FUTURA Nano coating

Pneumatic hammer

pneumatic hammer with a set of chisels included in a case IC index

SA7121K

Pneumatic saw

pneumatic saw with a set of blades included in a case IC index

SA8202K

IC index

366

TSHD1 EV

operating speed: 1600 rpm, reamer diameter: 8 mm IC index

SA8120

Pneumatic line sander

with disks for removing stickers and glue, 5 pcs. in the kit IC index

Shears for cutting sheet-metal rotary drill attachment, head

Pneumatic weld reamer

SA8701K

Shears for cutting sheet-metal rotary drill attachment, head IC index

TSMD1 EV

PAINT AND BODY EQUIPMENT

Radiator FDS 1000

has 1 lamp 1000W, max. heating surface 800x500 mm, equipped with a time switch adjustable from 0-60 minutes and temperature regulation IC index

3500279

Radiator FDS 2000 PLUS

has 2 lamps 1000W each on the telescope arm, max. heating surface 800x1000 mm, equipped with a time switch adjustable from 0-60 minutes and temperature control IC index

3500280P

Radiator FDS 3300

has 3 lamps 1000W each on the telescope arm, max. heating surface 1000x1200 mm, equipped with a time switch adjustable from 0-99 minutes and temperature control IC index

3500281

Paper stand

for glueing purposes, four roll types (sized: 30, 60, 90 and 120 cm) can be mounted IC index

3420204

for â&#x20AC;&#x153;Xâ&#x20AC;? elements (handles separately under IC index: 420011)

3420010

Kit

for removing car-body dents without damaging the varnish using the noninvasive method (with the use of a glue puller) IC index

360-degree rotation, dimensions: 1400x760x1100 mm, weight: 26 kg IC index

Varnish stand IC index

Varnish stand

AGT-00112

PR-1500N

Stand

used for mounting car windows IC index

3420100

3M Promotional kit

for polishing and sanding lamps / headlamps plus extra polishing products (milk, paste) free of charge IC index

50663

367

PAINT AND BODY EQUIPMENT

PROFESSIONAL PRODUCTS FOR BODY SHOPS

SATA filter 444TM/ 474TM/ 484TM

Air inlet: G 1/2” internal thread Air outlet: 1/4” external thread Max. inlet pressure: 15.0 bar Max. outlet pressure: 10.0 bar Air flow at 6.0 bar: 3 600 NI/min Max. ambient temperature: 1200°C Max. ambient temperature for an activated carbon filter: 600°C

368

Version

Description

92296

SATA 444 2-stage filter, with a sintered bronze sleeve, fine dust filter, a pressure regulator and double connection module (2 x 1 / 4a)

Version

Description

92833

SATA 444 2-stage filter on the stand, with a sintered bronze sleeve, fine dust filter, a pressure regulator and double connection module (2 x 1 / 4a)

Version

Description

92304

SATA 444 L 2-stage filter, with a sintered bronze sleeve, fine dust filter and pressure regulator, to be directly mounted in the system (g 1/2i)

Version

Description

92312

SATA 474 2-stage, with a fine dust filter and carbon filter, with no pressure regulator, with dual connection module (2 x G 1/4a)

Version

Description

92320

SATA 484 3-stage filter, with a sintered bronze sleeve, fine dust filter, carbon filter and pressure regulator, with dual connection module (2 x G 1/4a)

Version

Description

129619

SATA 484 3-stage filter on the rack, with a bronze sleeve, fine dust filter, carbon filter, pressure regulator and dual connection module (2 x G 1/4a)

Version

Description

173195

SATA 484 3-stage portable filter in the case, with a sintered bronze sleeve, fine dust filter, carbon filter, pressure regulator, connection module (two valves with quick-connectors) and 13-mm air hose

SAFETY AND HYGIENE AT WORK

Safe leather sandals

Perforated, steel toe-cap, highly flexible antipuncture mid-sole, Velcro fastening. EN 20345 S1P SRC certified. IC index

BE7247B

Made of leather, equipped with a protective toecap and a highly flexible, anti-puncture mid-sole. Sole made of polyurethane. Made according to the EN 20345 S1P SRC standard, CE-certified.

BE7241B

Made of leather, equipped with a protective toe-cap and a highly flexible, anti-puncture mid-sole. Sole made of polyurethane. In line with the EN 20345 S3 RS SRC standard. CE-certified.

BE7243B

Made of suede, with mesh inserts. Polyurethane sole, polymer toe-cap, antipuncture mid-sole made of composite fibre. * do not use for heavy works such as agriculture, construction, etc. IC index

BE7213FG

Safe low-cut shoes

Made of highly-breathable mesh, withpolyurethane inserts and suede toe reinforcement, aluminium toe-cap, antipuncture mid-sole made of composite fibre, very light, e.g. size 42 â&#x20AC;&#x201C; approx. 470 g. IC index

BE7340B

Anatomically shaped, with gel inserts.

BE7398GEL

BE7246B

WINTER work shoes

Made of leather, equipped with a protective toe-cap and a highly flexible, anti-puncture mid-sole, additionally insulated with fleece. Sole made of polyurethane. In line with the EN 20345 S3 RS SRC standard. CE-certified.

BE7243PL

Safe work low-cut shoes

Made of suede, perforated, PU-covered toe. Polyurethane sole, polymer toe-cap, antipuncture mid-sole made of composite fibre. * do not use for heavy works such as agriculture, construction, etc. IC index

BE7212FG

Safe low-cut shoes

Made of highly-breathable mesh, with polyurethane inserts and suede toe reinforcement, aluminium toe-cap, antipuncture mid-sole made of composite fibre, very light, e.g. size 42 â&#x20AC;&#x201C; approx. 470 g. IC index

Shoe insoles IC index

Made of perforated, highly air-permeable suede, equipped with a protective toe-cap and a highly flexible, anti-puncture mid-sole. Made according to the EN 20345 S1P SRC standard.

IC index

Safe work low-cut shoes

BE7241FT

Safe work low-cut shoes

IC index

Safe work shoes

IC index

Without toe-cap and without anti-puncture mid-sole, with a polyurethane sole, carbon-type insert. EN 20347 O1 SRC certified. IC index

Safe work low-cut shoes

IC index

Professional leather low-cut shoes

BE7340Y

Shoelaces

10 pairs per pack, length: 100 cm IC index

BE7399A/N/100

369

SAFETY AND HYGIENE AT WORK

FLEX EVO models

– Top quality, comfort and protection – Material: suede / Air Mesh – Sole: rubber (HRO)/EVA SRC – Toe cap: ALcap (aluminium) – Insole: AMF – Stabiliser – Technology: AP ZERO

STREET models

LOTTO work boots

model: FLEX EVO 700, S3 SRC HRO, material: suede, colour: navy blue / grey

– Design, dynamics and lightness – Material: suede – Sole: rubber EVA; SRC – Toe cap: FLYcap (composite) – Metal Free – Double shoelaces – Insole: Ortholite – Technology: AP ZERO

LOTTO work boots

model: STREET, S1P SRC, material: suede, colour: grey/green IC index

S8472

JUMP models

NEW

S1202

LOTTO work boots

model: FLEX EVO 800 MID, S3 SRC HRO, material: suede, colour: navy blue/grey IC index

model: STREET, S1P SRC, material: suede, colour: black/grey

model: FLEX EVO 500, S1P SRC HRO, material: suede, colour: navy blue/grey

NEW

S1198

LOTTO work boots

model: JUMP 750, S3 SRC, material: nubuck, colour: grey IC index

NEW

S1204

LOTTO work boots IC index

– Flexibility, durability and endurance – Material: nubuck – Sole: polyurethane; SRC – Toe cap: ALcap (aluminium) – Stabiliser – Technology: AP ZERO

370

NEW

R6994

LOTTO work boots IC index

IC index

NEW

T2178

NEW

SAFETY AND HYGIENE AT WORK

LOTTO work boots

model: JUMP 750, S3 SRC, material: nubuck, colour: blue IC index

T2180

LOTTO work boots

model: JUMP 500, S1P SRC, material: nubuck, colour: grey IC index

LOTTO work boots

model: JUMP 500, S1P SRC, material: nubuck, colour: blue IC index

NEW

SHOES-TE

IC index

SPRINT models

IC index

Q8361

model: SPRINT II 850 MID, S3 SRC, material: suede, colour: grey

model: SPRINT 101 MID, S3 SRC, material: leather, colour: black IC index

Q8362

IC index

NEW

R6993

LOTTO work boots

model: SPRINT II 550, S1P SRC, material: suede, colour: grey IC index

LOTTO work boots

SHOES-TE

LOTTO work boots

– Version: SPORT/CLASSIC/EASY – Material: suede/nubuck/leather – Sole: polyurethane; SRC – Toe-cap: made of steel – Technology: AP ZERO

model: SPRINT 201, S1P SRC, material: nubuck, colour: grey

R7008

Agent with fungicidal properties used for disinfecting the inside of shoes. It effectively eliminates fungi in footwear and removes unpleasant sweat odour.

Q1997

LOTTO work boots

NEW

R6991

LOTTO work boots

model: SPRINT 101, S3 SRC, material: leather, colour: black IC index

Q8363

371

SAFETY AND HYGIENE AT WORK

Work blouse

Standard work trousers

Made of a material weighing 280 g/ m2. Equipped with plenty of pockets and inserts on reinforced shoulders. Available in the following sizes: M, L, XL, XXL. IC index

With plenty of pockets. Made of a material weighing 280 g/m2. Reinforced and moisture-protection knee inserts with additional pockets for knee pads. Available in the following sizes: M, L, XL, XXL.

0XSK0007

IC index

POLISH PRODUCT

Work trousers with braces

Padded poly-amide vest

â&#x20AC;?Dungareesâ&#x20AC;? type. Made of a material weighing 280 g/m2. A large number of pockets, knee reinforcements with pockets for knee pads. Available in the following sizes: M, L, XL, XXL. IC index

0XSK0008

Navy blue with a red lining. It perfectly protects against wind and cold. Available in the following sizes: M, L, XL, XXL. IC index

0XSK0003

0XSK0009 POLISH PRODUCT

POLISH PRODUCT

One-piece work overalls

Styled like a rally suit. Made of material with weighing 260 g/m2 with the Evert, ProfiRS, Profitool, Hans, Toptul, Sonic logo. Available in the following sizes: M, L, XL, XXL. black and red IC index

0XSK0001-1

black and green IC index

0XSK0001-2

POLISH PRODUCT

372

SAFETY AND HYGIENE AT WORK

Knee-length work trousers

POLISH PRODUCT

Made of fabric weighing 260 g/m2. Available in the following sizes: M, L, XL, XXL. Three colour variants:

Black with red inserts. IC index

Black with green inserts.

0XSK0011CC

IC index

Navy blue with green inserts.

0XSK0011CZ

IC index

Standard work trousers

0XSK0011GZ

POLISH PRODUCT

Made of fabric weighing 260 g/m2. Available in the following sizes: M, L, XL, XXL. Three colour variants:

Black with red inserts. IC index

Black with green inserts.

0XSK0012CC

IC index

Navy blue with green inserts.

0XSK0012CZ

IC index

Dungarees-type work trousers with braces Made of fabric weighing 260 g/m2. Available in the following sizes: M, L, XL, XXL.

0XSK0012GZ

POLISH PRODUCT

Three colour variants:

Black with red inserts. IC index

Navy blue with green inserts.

Black with green inserts.

0XSK0013CC

IC index

0XSK0013CZ

Work blouse

IC index

0XSK0013GZ

POLISH PRODUCT

Made of fabric weighing 260 g/m2. Available in the following sizes: M, L, XL, XXL. Three colour variants:

Black with red inserts. IC index

Navy blue with green inserts.

Black with green inserts.

0XSK0014CC

IC index

0XSK0014CZ

IC index

0XSK0014GZ

Flexible one-piece work overalls

Made of fabric weighing 260 g/m2. Thanks to its special inserts on the back and sleeves (made of elastic fabric), it does not restrict movement like a standard one-piece suit. At the same time, additional inserts ensure that your clothes are airtight. Available in the following sizes: M, L, XL, XXL.

POLISH PRODUCT grey with red inserts IC index

grey with black inserts

0XSK0015/1

IC index

0XSK0015/2

373

SAFETY AND HYGIENE AT WORK

Double-sided warning vest

Outer material: Oxford 300D polyester (100%). Lining: 65% polyester + 35% cotton. Zip fastener, two easily accessible pockets.

yellow IC index

BEVWJK127Y

orange IC index

BEVWJK127O

Fleece warning vest

Outer material: 100% polyester fleece. Lining: 100% polyester mesh. Zip fastener in the front, two zipped pockets, elastic cuffs and waistband drawstring.

yellow IC index

BEVWFC13BY

orange IC index

BEVWFC13BO

Softshell warning vest

Outer material: Softshell fabric laminated with 100% polyester. Water resistance: 8.000 mm water column, 1000 g breathability. Zip fastener in the front, two zipped pockets and one chest pocket, detachable hood.

yellow IC index

BEVWJK135YN

orange IC index

BEVWJK135ON

Warning rain-proof vest

Outer material: Oxford Ripstop 300D polyester (100%). Lining: mesh 100% polyester. Zip fastener in the front, covered with a snap-on strip, glued seams. Two easily accessible pockets, phone pocket, â&#x20AC;?Napoleonâ&#x20AC;? pocket.

yellow IC index

BEVWJK61YN

orange IC index

Warning work trousers

Fabric 65% polyester + 35% cotton. Two side pockets, back pocket fastened with Velcro, large side pocket on the leg. Durable belt loops at the waist.

BEVWJK61ON

yellow IC index

BEVWTC17YN

orange IC index

BEVWTC17ON

Winter cap

Baseball cap

yellow

Highly visible, fluorescent coloured.

IC index

BEVW21503Y

orange IC index

374

Highly visible, fluorescent coloured, with a reflective strip.

IC index

BEVWOT229Y

orange

BEVW21503O

IC index

BEVWOT229O

SAFETY AND HYGIENE AT WORK

Uvex sportstyle safety glasses dimmed glass, UV 400 filter, black-blueblack frame IC index

9193.277

yellow glass, contrast-enhancing, non-HC-AF anti-fog coating, anthraciteyellow frame

9190.220

Uvex i-3 safety glasses colourless glass, HC-AF anti-fog coating, anthracite-blue frame IC index

9190.275

anti-fog CA glass, grey-colourless frame

9301.714

dimmed glass with filter No. 5, HC-AF coating, green-black frame (welding, soldering and acetylene-oxygen cutting) IC index

IC index

9190.286

Uvex pheos safety glasses

yellow glass, contrast-enhancing, HC-AF antifog coating, black-yellow frame

9192.385

Uvex ultravision safety goggles

with a half-faceguard, transparent glass, HC-AF anti-fog coating

9301.555

Uvex 9350 welding goggles

dimmed glass with filter No. 5 (welding, soldering and acetylene-oxygen cutting) IC index

9350.035

Uvex K3 hearing protector Class 3 protection IC index

2600.003

Uvex K200 hearing protector adjustable headband, class 1 protection class IC index

2600.200

Uvex pheos safety glasses

colourless glass, HC-AF anti-fog coating, black-green frame IC index

9192.225

Uvex i-vo 9160 welding glasses

dimmed glass with filter No. 5, infradur-AF coating, green-black frame (welding, soldering and acetylene-oxygen cutting) IC index

9160.045

Carton of 200 pairs of earplugs made by Uvex IC index

2112.001

9302.045

Uvex u-cap spotr

Lightweight, hard-shell safety helmet (hard hat) for impact protection IC index

grey glass, HC-AF anti-fog coating, anthracite-red frame

IC index

Uvex ultrasonic flip-up 9302 welding glasses

9193.216

Uvex i-3 safety glasses

IC index

Uvex ultravision safety goggles IC index

transparent glass, UV 400 filter, black-whiteblack frame IC index

Uvex i-3 safety glasses IC index

Uvex sportstyle safety glasses

Safety overalls

Uvex 5/6-type classic

Carton of 15 dust masks with a valve, Uvex Silv-Air class P2 IC index

9794.401

8732.110

Size: L IC index

Uvex u-cap premium

Lightweight, hard-shell safety helmet (hard hat) with mesh for impact protection IC index

9794.310

98449.11

Size: XL IC index

98449.12

Size: XXL IC index

98449.13

Carton of 15 dust masks with a valve, Uvex Silv-Air class P2 IC index

8732.210

375

SAFETY AND HYGIENE AT WORK

Microgard 1800 Comfort suit

light protective suit made from microporous laminate mixed with breathable SMS material in the back and underarms parts, anti-static and without silicone IC index

NEW

0RS1006-XXL

Available in sizes: 0RS1006-L - size L 0RS1006-XL - size XL 0RS1006-XXL - XXL size

HyFlex - anti-cutting gloves

Cut-resistant glove for working with sheet metal or other sharp elements, resistant to abrasion, which extends the service life IC index

11-727-L

Black nitrile gloves textured over the entire surface for a better grip on a wet surface, strong and flexible IC index

376

93-852-L

Available in sizes: 93-852-M 93-852-L 93-852-XL

Light assembly gloves matched to your hand with a breathable nitrile foam coating in non-marking color, without silicone IC index

Available in sizes: 11-727-M 11-727-L 11-727-XL

Microflex - textured nitrile gloves - 100 pieces

HyFlex - lightweight assembly gloves

NEW

11-801-L

Available in sizes: 11-801-M 11-801-L 11-801-XL

Edge - abrasion resistant gloves

Gloves for light work requiring good grip and resistance to abrasion, in black colour masking dirt IC index

48-126-L

Available in sizes: 48-126-M 48-126-L 48-126-XL

SAFETY AND HYGIENE AT WORK

Pack of 12 pairs of safety gloves

Pack of 12 pairs of RTEPO gloves

DIGGERS, made of cow split leather, reinforced, fullhand, lined internally, used in building, heavy industry and mechanics, size: 10.5 IC index

size 10, polyurethane-coated, made of polyester, wearand tear-resistant, provide manual handling and excellent feeling, durability: 4131

0XREK305/10/K Rozmiar 10

Rozmiar 9 IC index

Pair of RMC-AQUILA safety gloves

0XREK015/10/K

size: 10.5, nitrile-coated, finished with rigid cuffs, resistant to fats, lubricants, oils and hydrocarbons, durability: 4111 IC index

0XREK202/L/P

WELDOGER welding gloves

0XREK010/10/K

YELLOWBEE welding gloves

made of cow split leather, colour: honey, length: 35 cm, kevlar-stitched, single-piece gripping part, 100% leather-made (including cuff ), lined inside, in accordance with the EN388 (4143), EN407 (413X4X) and EN12477 TYPE A standards

made of cow split leather combined with goat grain leather, colour: honey, length: 35 cm, kevlarstitched, single-piece gripping part, 100% leathermade (including cuff ), lined inside, in accordance with the EN388 (3132), EN407 (413X4X) and EN12477 TYPE A standards

12 pcs. per pack IC index

IC index

Pack of 12 pairs of RNITNP oil gloves

ideal for mechanics, made of stretch and neoprene, silicone-coated within a grip part, Velcro fastener, reflective inserts, very durable and wear-resistant, size: L IC index

0XREK015/9/K

12 pcs. per pack

0XREK101/11/K

IC index

0XREK102/11/K

Pack of 12 pairs of RTELA gloves

made of polyester, latex, rough textured, abrasion and tear-resistant, stretchable and durable, perfectly adjust to the hand, do not shrink when in contact with water, excellent manual handling with reduced slippage, resistance: 2121 Size: 9, red IC index

Size: 10, red

0XREK011/9/K

IC index

0XREK011/10/K

Pack of 12 pairs of RNYPO-ULTRA safety gloves

made of nylon, coated with ultra-thin polyurethane, breathable, providing excellent feeling, for general workshop works, in accordance with EN388 (3121)

Size: 9, blue IC index

Size: 10, blue

0XREK012/9/K

IC index

0XREK012/10/K

Pack of 12 pairs of RNIT-VEX gloves

made of nitrile rubber, its rough gripping part ensures very good handling, long cuff, provides elasticity, solvent-resistant, used for cleaning spray guns, according to EN388 (4001), EN374-2 and EN374-3 (KLA), size: 10. IC index

Size: 9

IC index

0XREK003/10/K

Size: 10

0XREK006/9/K

IC index

0XREK006/10/K

Pack of 100 nitrile gloves

Pack of 100 latex gloves

Size: M

blue, powder-free type, widely used in varnishing, at testing tables, excellent feeling and high chemical resistance including, nitro-resistance according to EN374-3 and EN455, sizes: M, L and XL

IC index

Size: XL

0XREK009/M/P

Size: L IC index

IC index

0XREK009/L/P

slightly powdered inside, for general mechanical works, approved for food contact, high detergent resistance according to EN374-1 and EN374-3

IC index

Size: XL

0XREK002/M/K

IC index

0XREK002/XL/K

Size: L

0XREK009/XL/P

IC index

0XREK002/L/K

377

SAFETY AND HYGIENE AT WORK

IGLOTEX Safety gloves / 1 pair made of acrylic yarn, insulated, coated with rough

FOR WINTER

latex, ideal for low-temperature works, tearresistant, fluorescent IC index

0XREK401/U/P

IC index

0XREK402/U/P

Pack of 12 pairs of NITRIFOAM gloves made of nylon, coated with foamed nitrile, provide

silicone-coated within the grip part, Velcro fastener, reflective inserts, very durable and wear-resistant, size: L

excellent feeling, improved resistance to greases and oils while maintaining excellent manual handling, compliant with EN388 (3221)

0XREK201/L/P

Size: 9 IC index

Size: 10

0XREK001/9/K

IC index

Pack of 12 pairs of FLOATEX gloves

Pack of 10 pairs of RU gloves

Red

made of cotton/polyester, coated with mixed PVC and nitrile, ergonomic, with increased resistance to abrasion while maintaining excellent manual handling

IC index

0XREK008/9/K

0XREK001/10/K

cotton (100%) coated with rubber, finished with a drawstring, popular for all mechanical works, colloquially called â&#x20AC;?vampiresâ&#x20AC;?

Blue IC index

FOR WINTER

nitrile-coated, resistant to greases, oils, fats and hydrocarbons, ideal for low temperature works

RMC-AQUARIUS Safety gloves / 1 pair ideal for mechanics, soft leather combined with fabric, IC index

RIGLOTER Safety gloves / 1 pair made of loop acrylic yarn, comfortable, insulated,

0XREK008/10/K

IC index

Blue

0XREK007/C/K

IC index

0XREK007/N/K

Pack of 12 pairs of RNYLA gloves

made of nylon, coated with rough-structured latex, providing excellent grip and resistance to detergents and acids, robust, flexible, dust-free, compliant with EN388 (3131) and EN420

Size: 9, black IC index

Size: 10, black

0XREK004/9/K

IC index

Dust-absorbing cloths made of microfibre ProfiRS 5 pcs. (40x40cm)! IC index

0XREK004/10/K

Size: 9, blue IC index

Size: 10, blue

0XREK005/9/K

IC index

0XREK005/10/K

Pack of 100 latex powder-free gloves for general mechanical works, approved for food contact, high resistance to detergents

0RS902

Size: M IC index

0XREK003/M/K Size: XL

Size: L IC index

Universal cotton towels white cut compressed cube 10 kg IC index

378

0XC14022

0XREK003/L/K

IC index

0XREK003/XL/K

Universal cotton towels colourful cut compressed cube 10 kg IC index

0XC14015

SAFETY AND HYGIENE AT WORK

Universal paper towels â&#x20AC;&#x201C; 2 rolls Recycled 1-layer green, roll dimensions: height 26 cm, length 250 m, commonly used in car workshops IC index

0XFL105001

Universal paper towels â&#x20AC;&#x201C; 2 rolls Cellulosic 2-layer white glued, for all types of application, roll dimensions: height 25 cm, length 200 m IC index

0XFL116019

Universal grey paper towels

2 rolls 200 m, height 25 cm, 800 sheets, 2 layers, grey recycled glued paper towels IC index

0XC006

FAST ORANGE Permatex Paste High-quality emulsion for washing heavily dirtied hands without

the use of water, used in industrial plants, workshops and for various types of mechanical works. It contains no solvents which cause skin dryness and cracking. It quickly, effectively and gently removes persistent dirt derived from resin, oil, grease, ink, tar and many other substances leaving a fresh orange scent. It contains glycerine, lanolin, aloe vera and jojoba oil to leave hands fragrant and moisturised. This is a fully biodegradable product. Paste 440 ml

Universal blue paper towels 2 rolls; length 180 m, height 22 cm, 500 sheets,

3 layers. Universal cellulosic blue, glued paper towels. Application, among others in workshops, paint shops. IC index

floor version

420108

3 layers. Universal white cellulosic glued paper towels. Application, among others in workshops, paint shops. IC index

0XC008

Recycled white paper towels 1 roll; 307 m (height 25 cm x length 37 cm), 830 sheets. Double-layered recycled white paper towels, glued. IC index

0XC004

PER 60-040

Metal towel hanger wall version IC index

Cellulosic white paper towels 2 rolls; length 200 m, height 26 cm, 800 sheets,

PER 60-039

Paste 3.79 l IC index

0XC001

Metal towel rack IC index

IC index

420109

Universal cellulosic paper towels 2 rolls; length 236 m, height 25 cm, 800 sheets, 2 layers. Universal white cellulosic glued all-purpose paper towels. IC index

0XC003

Universal green paper towels 2 rolls; length 300 m, height 30 cm. Universal, single-layered, green recycled paper towels. Used, among others in car workshops. IC index

0XC009

379

4MAX HAND-WASH PASTE – SOLID CONSISTENCY FOR TRADITIONAL USE

BESTSELLER

The 4MAX Professional Hand-wash Paste is an extremely effective hand cleaner composed of skin-friendly ingredients. Thanks to its multi-component formula, the paste can eliminate a wide spectrum of particularly persistent dirt from your hands, such as greases, lubricants, waste oils, dust, rust, varnishes, paints, and adhesives. The paste is intended for use in workshops, industrial plants, printing works and paint shops, etc. It contains natural ingredients to protect your hand skin from dryness and irritation. Its specially prepared synthetic abrasive improves the mechanical effectiveness of cleaning. The 4MAX Paste is lighter than water, it does not clog the sewage system. The product is dermatologically tested. 0.5 l index: 1305-01-0001E 5 l index: 1305-01-0002E 10 l index: 1305-01-0003E

4MAX AGENT FOR WASHING HEAVILY DIRTED SURFACES

Specialised, concentrated 4MAX agent to be applied in industrial purposes to wash heavily dirtied surfaces such as floors, machine bodies, tables, etc. It facilitates solving numerous cleaning problems by using only one product . The agent removes all types of fat and oil contaminants as well as greases. It eliminates impurities derived from natural and mineral fats and paint residues. It is easy to mix with water. The product is intended for manual and machine washing. 5 l index: 1305-01-0022E 20 l index: 1305-01-0030E

BESTSELLER 4 MAX AGENT FOR WASHING ENGINES

Professional, concentrated 4MAX product for cleaning engines, tools, mechanical parts of equipment and removing grease and oil stains. Its multi-component formula guarantees cleaning even the dirtiest surfaces to make the engine look like new. It perfectly eliminates salt deposits and other difficult-to-clean impurities. The agent contains corrosion inhibitors – protects and preserves washed surfaces. It does not damage varnish or rubber gaskets. This is an environmentally-friendly product.

BESTSELLER

5 l index: 1305-01-0018E 1 l index: 1305-01-0019E 4x1 l index 1305-01-0019E 4X1L 20 l index: 1305-01-0031E

ACTIVE FOAM FOR WASHING PASSENGER CARS

Specialised, highly-concentrated 4MAX agent for the mechanical cleaning of passenger vehicles. The product has excellent degreasing properties. This is a top quality detergent for washing passenger cars with the use of active foam. It contains corrosion inhibitors. The agent contains no phosphates and thus saves the environment. Foam-forming product – apply it to any cleaned surface using pressure or foam-forming equipment. 1 kg index: 1305-01-0023E 5 kg index: 1305-01-0024E 20KG indeks: 1305-01-0033E

1305-01-Z1 WASHING KIT

KITS

It contains liquid to wash: engines (1 l), toilets (0.75 kg), dishes (1 l) and wash foam for passenger cars (1 kg).

HIT

1305-01-Z2 WASHING KIT

It contains liquid to wash: engines (1), toilets (0.75 kg), windows (1 l) and heavily dirtied surfaces (1 l).

SEMI-LIQUID 4MAX HAND-WASH PASTE FOR DISPENSERS

Specialised 4MAX paste â&#x20AC;&#x201C; semi-liquid consistency. Semi-liquid handwash paste is suitable for every type of paste dispenser. We offer an easy-to-use and easy-to-mount paste dosing kit.

BESTSELLER

0.5 l index 1305-01-0004E 4 l index 1305-01-0005E 5 l index 1305-01-0006E Handle index: 1305-01-0007E Pump index: 1305-01-0008E

4 MAX UNIVERSAL WASHING AGENT FOR USE IN HIGH-PRESSURE HOSES

Specialised, universal concentrated 4MAX cleaning agent for use in all high-pressure cleaning and washing equipment. Thanks to its multi-component formula, it guarantees a wide spectrum of applications â&#x20AC;&#x201C; it removes oils, greases and mineral impurities off all water-resistant surfaces such as glaze, terracotta, concrete surfaces, stone and wood terraces, plastic furniture, car paints and varnishes, etc. Perfect for use in your workshop, car, home, garden, etc. It is biodegradable. It contains no phosphates or other dangerous ingredients. It has a pleasant floral-fruity aroma. The product is intended for universal use in high-pressure washers, for cleaning vehicles, in the food industry, agriculture, etc.

5 l index: 1305-01-0036E

NEW 4MAX RUST REMOVER 4MAX RUST NEUTRALISER

This professional 4MAX workshop kit consists 2 products which are intended to remove difficult-towash dirt, greases, rust and eliminate fat off slightly and heavily rusted items. It is the highest quality set of products used to remove rust deposits off metal surfaces. The rust remover is used to remove corrosion from parts to be cleaned. The neutraliser is used to protect them against deposits. These products are also offered with an atomiser which for easy application. 0.5 kg Rust remover index: 1305-01-0037E 0.5+0.5 kg Rust remover + Rust neutraliser: 1305-01-0040E 5+5 kg Rust remover + Rust neutraliser: 1305-01-0041E 5 kg Rust remover index: 1305-01-0042E

NEW

ACTIVE FOAM FOR WASHING TRUCKS

Professional, highly-concentrated 4MAX agent for mechanical (touchless) cleaning of trucks, buses, agricultural machinery, alkaline environment resistant construction machinery, etc. This is a top-quality detergent for washing trucks with excellent degreasing properties with the use of active foam. The wide spectrum of applications allows for the removal of persistent road dirt, oils and others from car bodies, chassis, wheels, trailers, tarpaulins, railway wagons, tanks, etc. It contains corrosion inhibitors. It contains no phosphates and saves the environment. This is a foam-forming product and should be applied to any cleaned surface using pressure or foamforming equipment. 5 kg index: 1305-01-0025E 10 kg index: 1305-01-0026E 20 kg index: 1305-01-0027E

HIT

AGENT FOR WASHING PAVING BLOCKS

Concentrated, low-foaming agent with degreasing properties for the removal of persistent dirt such as oils, greases, fats, street dirt, wear marks, leaf marks. Suitable for cleaning paving blocks, paving slabs and other concrete surfaces. 1 kg index: 1305-01-0028E 5 kg index: 1305-01-0029E

HIT SORBENT 4MAX

The 4MAX Sorbent is designed to absorb petroleum substances, paints, emulsions, acids, alkalis and other liquid contaminants. The Sorbent has the form of a light and highly-absorbent solid. It absorbs liquid immediately. This is a ready-touse product. It eliminates and prevents slipping. 30 l index: 1305-01-0039E 60 l index: 1305-01-0045E

NEW

ACCESSORIES AND OTHER ITEMS

Set of washers

Set of copper washers

for an oil pan drain valve (18 types/390 pcs.) IC index

for an oil pan drain valve (18 types/360 pcs.) DIN 7603 A, from 6x10 up to 28x34

4499/000/06 8666

Set of clamping brackets TORRO, 8-chamber type, 150 pcs. from 8–12 up to 32–50 IC index

4499/000/06 8520

Set of fuses

made of glass, for radios in American and Japanese cars, 18-chamber type, 450 pcs. IC index

4499/000/06 8684

Set of rubber o-rings

sizes from 3x2.0 to 24x3.0 (18 types – 700 washers per pack) IC index

4499/000/06 8552

Set of Seeger rings (external) 18 types/180 pcs. IC index

4499/000/06 8547

Set

Set of clamping ties

made of plastic, in a practical hanger, 5 types, 500 pcs., colour black IC index

4499/000/06 8515

Standard, 8-chamber type, 3–30 A, 200 pcs.

Set of clamping ties

made of plastic, perforated strip in a practical hanger, 50 pcs. each: 25–50 and 40–110 mm IC index

4499/000/06 8695

Set of rubber o-rings

sizes from 25x3.0 to 42x3.0 (12 types – 140 washers per pack) IC index

4499/000/06 8553

Set of Seeger rings (internal) 18 types/180 pcs. IC index

4499/000/06 8518

IC index

4499/000/06 8548

4498/000/06 8621

Set of accessories

nuts – DIN934-8 galvanised flat washers – DIN125 galvanised and elastic washers – DIN127 galvanised, 18-chamber, 1425 parts, from M3 to M10 IC index

382

4499/000/06 8615

coated with rubber, for cutting: 4.5x3x10.5; 5.5x3x11.5; 7x3x13; 7,5x3x13.5

Set of car fuses IC index

4499/000/06 8551

Set of fuel pipes

of connectors, extensions, tees for sprinkler systems IC index

IC index

4499/000/06 8543

ACCESSORIES AND OTHER ITEMS

Standard fuses IC index 4638/000/51 5 4638/000/51 7,5 4638/000/51 10 4638/000/51 15 4638/000/51 20

Description Fuses STANDARD (5A) 100 pcs. per pack Fuses STANDARD (7.5A) 100 pcs. per pack Fuses STANDARD (10A) 100 pcs. per pack Fuses STANDARD (15A) 100 pcs. per pack Fuses STANDARD (20A) 100 pcs. per pack

MINI fuses IC index 4639/000/52 5 4639/000/52 7,5 4639/000/52 10 4639/000/52 15 4639/000/52 20

Description Fuses MINI (5A) 50 pcs. per pack Fuses MINI (7.5A) 50 pcs. per pack Fuses MINI (10A) 50 pcs. per pack Fuses MINI (15A) 50 pcs. per pack Fuses MINI (20A) 50 pcs. per pack

MAXI fuses IC index 4640/000/55 20 4640/000/55 30 4640/000/55 40 4640/000/55 50

Description Fuses MAXI (20A) 10 pcs. per pack Fuses MAXI (30A) 10 pcs. per pack Fuses MAXI (40A) 10 pcs. per pack Fuses MAXI (50A) 10 pcs. per pack

USA fuses IC index 4679/000/52 5 4679/000/52 10 4679/000/52 20 4679/000/52 25 4679/000/52 30

Description Glass fuses for American vehicles (5A) 50 pcs. per pack Glass fuses for American vehicles (10A) 50 pcs. per pack Glass fuses for American vehicles (20A) 50 pcs. per pack Glass fuses for American vehicles (25A) 50 pcs. per pack Glass fuses for American vehicles (30A) 50 pcs. per pack

Japan fuses IC index 4690/000/52 5 4690/000/52 10 4690/000/52 15 4690/000/52 20

Description Glass fuses for Japanese vehicles (5A) 50 pcs. per pack Glass fuses for Japanese vehicles (10A) 50 pcs. per pack Glass fuses for Japanese vehicles (15A) 50 pcs. per pack Glass fuses for Japanese vehicles (20A) 50 pcs. per pack

Glass fuses IC index 4649/000/52 1 4649/000/52 2 4649/000/52 5 4649/000/52 10

Cartridge fuses

IC index 4646/000/51 5 4646/000/51 8 4646/000/51 16 4646/000/51 25 4646/000/51 40

Description Glass fuses (1A) for car radios 50 pcs. per pack Glass fuses (2A) for car radios 50 pcs. per pack Glass fuses (5A) for car radios 50 pcs. per pack Glass fuses (10A) for car radios 50 pcs. per pack

Description Cartridge fuses (5A) 100 pcs. per pack Cartridge fuses (8A) 100 pcs. per pack Cartridge fuses (16A) 100 pcs. per pack Cartridge fuses (25A) 100 pcs. per pack Cartridge fuses; colour black (40A) 100 pcs. per pack

383

ACCESSORIES AND OTHER ITEMS

PVC clamping ties

100 pcs. per pack White clamping ties. Other sizes up to 9.0x780 at the following indexes: 4623/700/17... IC index

4623/700/17 2,5X100

Clamping tie

100 pcs. per pack NORMA TORRO 8–12. Other sizes up to 80x100 at the following indexes: 4647/000/7... IC index

4647/000/74 8X12

Clamping brackets

100 pcs. per pack COBRA 7.5/7 white. Other sizes up to 21x8 at the following indexes: 4648/000/51... IC index

4648/000/51 7,5X7

Perforated strip

10 pcs. per pack A2 (25x50) Available size: 40x110 at the following index: 4731/000/17 40x110 IC index

4731/000/17 25X50

Sheet-metal screws

100 pcs. per pack DIN 7981 with a PH head, colour black, galvanised 3.5x19. Screws sizes from 2.9x9.5 to 5.5x38 at the following index: 6040/051/51… IC index

6040/051/51 3,5X19

Sheet-metal screws

100 pcs. per pack, self-drilling type, with a pad PH head DIN 7504 M-H colour black, galvanised 42x13. Other sizes up to 4.8x22 at the following indexes: 6051/051/051/51.... IC index

6051/051/51 4,2X13

Sheet-metal screws

100 pcs. per pack, self-drilling type, DIN 7504 M, galvanised, 3.5x13. Other sizes up to 5.5x38 at the following indexes: 6047/001/51... IC index

384

6047/001/51 3,5X13

PVC clamping ties

100 pcs. per pack, colour black, 2.5x100 (”tie-wraps”). Other sizes up to 9.0x780 at the following indexes: 4623/705/17... IC index

4623/705/17 2,5X100

Single-clamp tie

10 pcs. per pack OETIKER for joints and rubber connectors 5.80x7.00. Other sizes up to 14.5x17 at the following indexes: 4730/000/17... IC index

4730/000/17 5,8X7

Clamping ties

10 pcs. per pack OETIKER Mini; size: 6x11. Available size: 9x19 at the following index: 4732/000/17 9.19 IC index

4732/000/17 6X11

Sheet-metal screws

100 pcs. per pack DIN 7981 with a PH head, galvanised 3.5x19. Screws sizes from 2.2x6.5 to 5.5x13 at the following index: 6040/001/51.... IC index

6040/001/51 3,5X19

Sheet-metal screws

100 pcs. per pack hexagonal type, with a pad, DIN 7976, galvanised, 6.5x20. Screws sizes from 4.8x16 to 8.0x19 at the following index: 6036/001/... IC index

6036/001/51 6,5X20

Sheet-metal screws

100 pcs. per pack, with a pad head, colour black, galvanised 3.5x13. Other sizes up to 4.8x25 at the following indexes: 4621/051/51... IC index

4621/051/51 3,5X13

Screws

100 pcs. per pack, self-drilling type, DIN 7504 M TX, galvanised, 3.5x13. Other sizes up to 4.8x25 at the following indexes: 6054/001/51... IC index

6054/001/51 3,5X13

ACCESSORIES AND OTHER ITEMS

Sheet-metal screws

100 pcs. per pack for registration with a pad head, 3.5x13, colour black. Sizes up to 4.8x25 at the following indexes: 4635/051/51... IC index

4635/051/51 3,5X13

Washer

100 pcs. per pack DIN 125 galvanised M3.2. Other sizes up to M25 at the following indexes: 1510/001... IC index

1510/001/51 3,2

Washer

100 pcs. per pack, flat, DIN 9021, galvanised, 4.3 mm (M4). Other sizes up to 17 mm at the following indexes: 1700/001/… IC index

1700/001/51 4,3

Washer

100 pcs. per pack, elastic, DIN 137 B, galvanised, 4 mm. Other sizes up to 16 mm at the following indexes: 1526/041/51... IC index

1526/041/51 4

Washer

100 pcs. per pack, serrated, DIN 6798 AZ, galvanised, 4 mm. Other sizes up to 16.5 mm at the following indexes: 1668/001/51... IC index

1668/001/51 4,3

Self-locking nut

100 pcs. per pack DIN 934, galvanised, M8x1. Other sizes up to 24x1.5 at the following indexes: 0628/001... IC index

0628/001/51 8X1

Self-locking nut

100 pcs. per pack DIN 985, finely-coiled, galvanised, M8x1. Other sizes up to 24x1.5 at the following indexes: 0682/001... IC index

0682/001/51 8X1

Galvanised nut

100 pcs. per pack, made of 4.2-mm sheet (11369), metal-sheet nut. Various sizes and shapes at the following indexes: 4605/001/51 ... and 4676/001/53 ... IC index

4605/001/51 0536

Washer

100 pcs. per pack, for vehicle bodywork, galvanised, 3.2x10. Other sizes up to 15x40 at the following indexes: 2104/001/51... IC index

2104/001/51 3,2X10

Washer

100 pcs. per pack, elastic, DIN 127, galvanised M3. Other sizes up to M24 at the following indexes: 1516/001/… and 1696/001/51… IC index

1516/001/51 3

Washer

100 pcs. per pack, serrated, DIN 6798 IZ, galvanised, 4 mm. Other sizes up to 16.5 mm at the following indexes: 1667/001/51... IC index

1667/001/51 4,3

Nut

100 pcs. per pack hexagonal type, DIN 934, galvanised, M3. Other sizes up to M24 at the following indexes: 0624/001... IC index

0624/001/51 3

Self-locking nut

100 pcs. per pack DIN 985, galvanised, M3. Other sizes up to 24 at the following indexes: 0680/001/… IC index

0680/001/51 3

M4 self-locking nut

100 pcs. per pack Other sizes up to M16 at the following indexes: 0690/001 ... IC index

0690/001/51 4

385

ACCESSORIES AND OTHER ITEMS

Self-locking nut

100 pcs. per pack M10x1, DIN 980 V, galvanised. Other sizes up to 16x1.5 at the following indexes: 0691/001... IC index

0691/001/51 10X1

Wing nut

100 pcs. per pack, galvanised, size: 3. Other sizes up to 12 at the following indexes: 0920/001/5â&#x20AC;Ś IC index

0920/001/51 3

100 pcs. per pack hexagonal, DIN 14440, made of copper, M8 SW 13. Other sizes up to 12x19 at the following indexes: 4600/080/51...

4600/080/51 8X13

Exhaust nut

100 pcs. per pack, hexagonal, DIN 14440, copper-coated steel, M6 SW 9. Other sizes up to 12x17 at the following indexes: 4601/080/51... IC index

4601/080/51 6X9

Metric screws

100 pcs. per pack, with a cross-type seat (PH) and conical-flat head, DIN 965 4.8, galvanised, size: 3x6. Other sizes up to 8x30 at the following indexes: 0450/001/5... IC index

0450/001/51 3X6

Metric screws

100 pcs. per pack, with a plain notch and conical-flat head, DIN 963 4.8, galvanised, size: 3x10. Other sizes at the following indexes: 0420/001/5â&#x20AC;Ś IC index

0420/001/51 3X10

Steel bolt

50 pcs. per pack, with a hexagonal head, DIN 933 8.8, galvanised, size: M16x60. Other sizes up to 24x80 at the following indexes: 0222/001/01... IC index

386

100 pcs. per pack, capped, DIN 1587, galvanised, M3. Other sizes up to M12 at the following indexes: 0712/001/5... IC index

0222/001/01 16X60

0712/001/51 3

Hexagonal spacer bushings 100 pcs. per pack, galvanised, size: 6x20. Other sizes up to 16x50 at the following indexes: 0913/001/7... IC index

Exhaust nut

IC index

Hexagonal nut

0913/001/74 6X20

Exhaust nut

100 pcs. per pack with a washer (8x12). Other sizes up to 10x15 at the following indexes: 4636/080/51... IC index

4636/080/51 8X12

Metric screws

100 pcs. per pack, with a cross-type seat (PH), DIN 7985 4.8, galvanised, size: 3x6. Other sizes up to 6x100 at the following indexes: 0470/001/5... IC index

0470/001/51 3X6

Fastening bolt

100 pcs. per pack, with a plain notch, DIN 84 galvanised, size: 3x6. Other sizes up to 6x100 at the following indexes: 0400/001/5... IC index

0400/001/51 3X6

Steel bolt

100 pcs. per pack, with a hexagonal head, DIN 933 8.8, galvanised, size: M4x10. Other sizes up to 16x100 at the following indexes: 0222/001/7... IC index

0222/001/74 4X10

Steel bolt

100 pcs. per pack, with a hexagonal head, DIN 931 8.8, galvanised, size: M5x30. Other sizes up to 24x300 at the following indexes: 0202/001 ... IC index

0202/001/74 5X30

ACCESSORIES AND OTHER ITEMS

Bolt with hexagonal head

25 pcs. per pack, partial thread, DIN 933 8.8, raw, size: 20x80. Other sizes up to 24x400 at the following indexes: 0202/000/01... IC index

0202/000/01 20X80

Bolt with hexagonal head

50 pcs. per pack, partial thread, finely-coiled, DIN 960 10.9, galvanised, size: 5x4 Other sizes up to 16x1.5x80 at the following indexes: 0252/002/… IC index

0252/002/75 12X1,5X40

Allen bolt

100 pcs. per pack with a conical head and hexagonal seat, DIN 7991 8.8, galvanised, size: 4x10 Other sizes up to 12x35 at the following indexes: 0306/001/74... IC index

0306/001/74 4X10

Carriage bolt

100 pcs. per pack, with a hexagonal nut and square seat and conical-flat head, DIN 603 4.8, galvanised, size: 5x20. Other sizes up to 12x160 at the following indexes: 0011/001/7... IC index

100 pcs. per pack, solid, DIN 7603 A5x9x1. Other sizes up to 32x38x2 at the following indexes: 4607/000/17...

4607/000/17 5X9X1

Copper washer

100 pcs. per pack, solid, 6x10x1.5. Other sizes up to 30x36x2.5 at the following indexes: 4608/000/17... IC index

4608/000/17 6X10X1,5

O-ring NBR 3x2.0

50 pcs. per pack. Other sizes up to 42x3 at the following indexes: 4630/000/17... IC index

100 pcs. per pack, full thread, finely-coiled, DIN 961 10.9, galvanised, size: 10x1x20 Other sizes up to 16x1.5x50 at the following indexes: 0262/002/… IC index

0262/002/74 10X1X20

Allen bolt

100 pcs. per pack, galvanised, DIN 912 8.8 M4x10. Other sizes up to 12x80 at the following indexes: 0300/001/7... IC index

0300/001/74 4X10

Double-sided bolt

25 pcs. per pack, DIN 939 5.8, raw 6x20 thread pitch 1.25 mm. Other sizes up to 10x50 at the following indexes: 1611/000/17... IC index

1611/000/17 6X20

Oil drain plugs

various types for different brands, 5 pcs. per pack IC index

4494/000/17…

0011/001/74 5X20

Copper washer IC index

Bolt with hexagonal head

4630/000/17 3X2

Aluminium washer

100 pcs. per pack, DIN 7603 6x10. Other sizes up to 26x32 at the following indexes: 4616/000/51... IC index

4616/000/51 6X10

Washer

100 pcs. per pack, DIN7603, fibre, 5x9. Other sizes up to 30x36 at the following indexes: 4617/000/51... IC index

4617/000/51 5X9

DIN 94 cotter pins

100 pcs. per pack, galvanised, size: 1.6x20. Other sizes up to 10x100 at the following indexes: 1507/001 ... IC index

1507/001/51 1,6X20

387

ACCESSORIES AND OTHER ITEMS

Rings

100 pcs. per pack, used to protect shafts, DIN 6799, phosphorescent steel, size: 1.2. Other sizes up to 19 at the following indexes: 1670/000/17... IC index

1670/000/17 1,2

Seeger rings

20 pcs. per pack, external DIN 471 10x1.0. Other sizes up to 60x2 at the following indexes: 1552/000/17... IC index

1552/000/17 10X1

Car-body plug

50 pcs. per pack, size: 6. Other sizes up to 16 at the following indexes: 4622/000/52… IC index

4622/000/52 6

50 pcs. per pack with a threaded nipple (H1 M6x1) (H1 = straight). Other sizes and types available at the following indexes: 4632/001/52...

4632/001/52 6X1X1

Single-hole cotter pin

100 pcs. per pack 2x50. Other sizes up to 8x110 at the following indexes: 2064/001/17... IC index

2064/001/17 2X50

4.5-mm cotter pins

20 pcs. per pack. Sizes up to 11 at the following indexes: 4626/021/60… IC index

4626/021/60 4,5

5-mm shackles

388

4631/001/77 5

IC index

1553/000/17 10X1

Throttle bushing

100 pcs. per pack, double-sided, 4x7x9.5. Other sizes up to 25x32x38 at the following indexes: 4614/000 ... IC index

4614/000/51 4X7X9

Lubricator

50 pcs. per pack with a pin (H1 A6). Available sizes: 8x1 and 10x1 at the following indexes: 4633/001/…

4633/001/52 6X0X1

Elastic pins

100 pcs. per pack DIN 1481, clean, size: 3x16. Other sizes up to 12x80 at the following indexes: 1716/000/5... IC index

1716/000/51 2X20

Double-hole cotter pin

100 pcs. per pack 2x50. Other sizes up to 8x130 at the following indexes: 2068/001/17... IC index

2068/001/17 2X50

Clip hooks

20 pcs. per pack, galvanised, 40x4. Other sizes up to 180x14 at the following indexes: 4235/001/7... IC index

20 pcs. per pack. Other sizes up to 26 at the following indexes: 4631/001/… IC index

20 pcs. per pack, internal DIN 472 10x1. Other sizes up to 80x2.5 at the following indexes: 1553/000/…

IC index

Lubricator IC index

Seeger rings

4235/001/77 40X4

Clasp, buckle, clip hook

10 pcs. per pack, size: 5x48. Other sizes up to 10x89 at the following indexes: 4243/001/78... IC index

4243/001/78 5X48

ACCESSORIES AND OTHER ITEMS

Thimbles

20 pcs. per pack 4 mm up to 3.5 mm ropes. Other sizes up to 12 at the following indexes: 4625/001/… IC index

4625/001/77 4

Cable connector

100 pcs. per pack, 2.5-mm, a lot of different connectors: eyelets, slides, forks, splitters in yellow, red, blue at the following indexes: 4611/776/5… 4611/772/5… 4611/774/5… 4612/000/51… IC index

4611/772/17 11564

Plastic clip

25 pcs. per pack with a cap, rivet, dark grey Mercedes DB (OE-No. 1239900092), various upholstery pins at the following indexes: 4495/000/17… IC index

4495/000/17 02041

Electric cable

(cable) FLY (former FLK) PVC plastic insulation in a plastic bag, 0.75 mm2 white 5 m. Other cables at the following indexes: 4031/7… IC index

50 pcs. per pack 3.0 mm. Other sizes up to 26 at the following indexes: 4636/001/ IC index

10 pcs. per pack, for hose, GS 3-mm type. Other connectors available at the following indexes: 4669/000/17....

Heat-shrinkable connectors

100 pcs. per pack, glued blue 1.5 – 2.5 mm2, heat-shrinkable insulation; various heat-shrinkable electrical connectors in blue, red and yellow at the following indexes: 4637/776/51… 4637/774/52… 4637/772/51… IC index

4637/772/51 115162

Electric cable

(cable) FLY (formerly FLK) PVC plastic insulation on unwinding reels, 1.5 mm2 brown 100 m, cables in different colours and thickness at the following indexes: 4677/7… IC index

4677/702/06 1,5

Speaker cable

1 pcs. per pack, red/black in a plastic bag, 2 x 0.75 mm, 2.5 m long IC index

4032/000/40 1

4669/000/17 10

PVC hose

1 pc. (2m) per pack, for windscreen washing units in a foil bag (4.0x1.0x6.0); the offer also includes: fuel hoses, in braids etc. at the following indexes: 4706/000/.. 4707/000/… 4715/000/… 4716/000/… 4726/000/… 4727/000/… 4498/000/06 9621 IC index

Universal workshop cover

for Stabilo armchair, made of synthetic leather; the offer also includes: textile covers, leather covers, for single seats, double seats, rear seats, mudguards, steering wheel under the following indexes: 4492/000/06… IC index

4634/001/75 3

4031/701/40 0,75

Plastic connector IC index

Rope clamps

4492/000/06 4711

4706/000/17 4X1X6

Heat-shrink sleeves

50 pcs. per pack. 2:1 shrinkage ratio 2.4 – 1.2; length: 10 cm; heat-shrink sleeves and hoses at the following indexes: 4725/000/17… 4728/000/17… 4740/000/17… 4705/000/06… 4664/000/06… 4498/000/06 8620 4498/000/06 8630 IC index

4725/000/17 2,4X1,2

389

ACCESSORIES AND OTHER ITEMS

Cable ties Cable ties are intended to fix electrical wires, cables, hoses, tubes, etc. in

bundles. Easy to mount; they are characterised by high quality and reliability.

CABLE TIE – WHITE

CABLE TIE – BLACK

Index

Length [mm]

Width [mm]

Max Ø [mm]

Index

Length [mm]

Width [mm]

Max Ø [mm]

MMT TKB 100/2.5 MMT TKB 120/2.5 MMT TKB 140/3.6 MMT TKB 160/2.5 MMT TKB 160/4.8 MMT TKB 200/2.5 MMT TKB 200/3.6 MMT TKB 200/4.8 MMT TKB 250/3.6 MMT TKB 250/4.8 MMT TKB 300/3.6 MMT TKB 300/4.8 MMT TKB 300/8.0 MMT TKB 370/3.6 MMT TKB 370/4.8 MMT TKB 370/8.0 MMT TKB 430/4.8 MMT TKB 430/8.0 MMT TKB 450/8.TZ MMT TKB 500/4.8 MMT TKB 530/8 MMT TKB 710/9 MMT TKB 780/9

100 120 140 160 160 200 200 200 250 250 300 300 300 370 370 370 430 430 450 500 530 710 780

2.5 2.5 3.6 2.5 4.8 2.5 3.6 4.8 3.6 4.8 3.6 4.8 8 3.6 4.8 8 4.8 8 8 4.8 8 9 9

25 30 34 40 40 55 55 55 60 60 88 88 88 100 100 100 115 115 130 135 160 190 220

MMT TKC 100/2.5 MMT TKC 120/2.5 MMT TKC 140/3.6 MMT TKC 160/2.5 MMT TKC 160/4.8 MMT TKC 200/2.5 MMT TKC 200/3.6 MMT TKC 200/4.8 MMT TKC 250/3.6 MMT TKC 250/4.8 MMT TKC 300/3.6 MMT TKC 300/4.8 MMT TKC 300/8 MMT TKC 370/3.6 MMT TKC 370/4.8 MMT TKC 370/8 MMT TKC 430/4.8 MMT TKC 430/8 MMT TKC 450/8 MMT TKC 500/4.8 MMT TKC 530/8 MMT TKC 710/9 MMT TKC 780/9

100 120 140 160 160 200 200 200 250 250 300 300 300 370 370 370 430 430 450 500 530 710 780

2.5 2.5 3.6 2.5 4.8 2.5 3.6 4.8 3.6 4.8 3.6 4.8 8 3.6 4.8 8 4.8 8 8 4.8 8 9 9

25 30 34 40 40 55 55 55 60 60 88 88 88 100 100 100 115 115 130 135 160 190 220

CABLE TIE – GREEN

CABLE TIE – BLUE Index

Length [mm]

Width [mm]

Max Ø [mm]

Index

Length [mm]

Width [mm]

Max Ø [mm]

MMT TKBL 100/2.5 MMT TKBL 200/2.5 MMT TKBL 300/3.6 MMT TKBL 300/4.8 MMT TKBL 370/7.6

100 200 300 300 370

2.5 2.5 3.6 4.8 7.6

25 55 88 88 100

MMT TKGR 100/2.5 MMT TKGR 200/2.5 MMT TKGR 300/3.6 MMT TKGR 300/4.8 MMT TKGR 370/7.6

100 200 300 300 370

2.5 2.5 3.6 4.8 7.6

25 55 88 88 100

CABLE TIE – SILVER

CABLE TIE – RED Index

Length [mm]

Width [mm]

Max Ø [mm]

Index

Length [mm]

Width [mm]

Max Ø [mm]

MMT TKRD 100/2.5 MMT TKRD 200/2.5 MMT TKRD 300/3.6 MMT TKRD 300/4.8 MMT TKRD 370/7.6

100 200 300 300 370

2.5 2.5 3.6 4.8 7.6

25 55 88 88 100

MMT TKS 300/3.6

300

3.6

CABLE TIE – YELLOW

390

CABLE TIE – BROWN

Index

Length [mm]

Width [mm]

Max Ø [mm]

Index

Length [mm]

Width [mm]

Max Ø [mm]

MMT TKYL 100/2.5 MMT TKYL 200/2.5 MMT TKYL 300/3.6 MMT TKYL 300/4.8 MMT TKYL 370/7.6

100 200 300 300 370

2.5 2.5 3.6 4.8 7.6

25 55 88 88 100

MMT TKBR 100/2.5 MMT TKBR 200/2.5 MMT TKBR 300/3.6 MMT TKBR 300/4.8 MMT TKBR 370/7.6

100 200 300 300 370

2.5 2.5 3.6 4.8 7.6

25 55 88 88 100

ACCESSORIES AND OTHER ITEMS

MINI clips

ASFA-L clips

MINI-CLIP – WORM-DRIVE HOSE CLIPS 10 pcs. per pack INDEX

ASFA-L WORM-DRIVE HOSE CLIPS, strip width: 9 mm 10 pcs. per pack, W1 steel INDEX

SIZE

OSM 03010510 10SZT

6 mm (strip width: 8.4 mm)

OSM 03010528 10SZT

8 mm (strip width: 9 mm)

OSM 03010536 10SZT

9 mm (strip width: 10 mm)

OSM 03010544 10SZT

9,5–10 mm (strip width: 10 mm)

ASFA-S clips

ASFA-S WORM-DRIVE HOSE CLIPS, strip width: 12 mm 10 pcs. per pack, W1 steel INDEX

SIZE

OSM 03008753 10SZT

8–16 mm

OSM 03009001 10SZT

16–27 mm

OSM 03008761 10SZT

12–22 mm

OSM 03009002 10SZT

20–32 mm

OSM 03008770 10SZT

16–27 mm

OSM 03009003 10SZT

25–40 mm

OSM 03008788 10SZT

20–32 mm

OSM 03009004 10SZT

30–45 mm

OSM 03008796 10SZT

25–40 mm

OSM 03009005 10SZT

32–50 mm

OSM 03008809 10SZT

30–45 mm

OSM 03009006 10SZT

40–60 mm

OSM 03008817 10SZT

32–50 mm

OSM 03009007 10SZT

50–70 mm

OSM 03008825 10SZT

40–60 mm

OSM 03009008 10SZT

60–80 mm

OSM 03008833 10SZT

50–70 mm

OSM 03009009 10SZT

70–90 mm

OSM 03008841 10SZT

60–80 mm

OSM 03009010 10SZT

80–100 mm

OSM 03010552 10SZT

10–11mm (strip width: 10 mm)

OSM 03010560 10SZT

12–13 mm (strip width: 10 mm)

OSM 03010579 10SZT

13–14 mm (strip width: 10 mm)

OSM 03010587 10SZT

14–15 mm (strip width: 10 mm)

OSM 03010595 10SZT

15–17 mm (strip width: 10 mm)

OSM 03010608 10SZT

16–18 mm (strip width: 10 mm)

OSM 03008850 10SZT

70–90 mm

OSM 03009011 10SZT

90–110 mm

OSM 03010616 10SZT

18–20 mm (strip width: 10 mm)

OSM 03008868 10SZT

80–100 mm

OSM 03009013 10SZT

110–130 mm

OSM 03010624 10SZT

19–21 mm (strip width: 10 mm)

OSM 03008876 10SZT

90–110 mm

OSM 03009015 10SZT

130–150 mm

“SUPER” clips

DIN 3021 clips

HIGH-PRESSURE „SUPER” CLIPS INDEX

Size

OGM 03018263 10SZT

17–19 W1 (width: 18 mm)

OGM 03018271 10SZT

20–22 W1 (width: 18 mm)

OGM 03018280 10SZT

WIRE clips

ELASTIC SELF-LOCKING CLIPS (W1. DIN 3021) 10-piece packs INDEX

Nominal / minimum / maximum diameter

OBM 03031501 10SZT

17/15.6/18.5

OBM 03031510 10SZT

19/17.8/20.2

23–25 W1 (width: 18 mm)

OBM 03031528 10SZT

20/18.4/21.6

OGM 03018298 10SZT

26–28 W1 (width: 18 mm)

OBM 03031536 10SZT

21/19.5/22.5

OGM 03018300 10SZT

29–31 W1 (width: 20 mm)

OBM 03031538 10SZT

22/20.5/24.2

OGM 03018319 10SZT

32–35 W1 (width: 20 mm)

OBM 03031544 10SZT

23/21.0/24.7

OBM 03031552 10SZT

24/22.0/26.0

OGM 03018327 10SZT

36–39 W1 (width: 20 mm)

OBM 03031560 10SZT

25/23.5/26.8

OGM 03018335 10SZT

40–43 W1 (width: 20 mm)

OBM 03031579 10SZT

26/24.3/28.0

OGM 03018010 8SZT

44–47 W1 (width: 22 mm)

OBM 03031587 10SZT

27/25.2/29.2

OBM 03031595 10SZT

29/27.0/31.5

OGM 03018028 8SZT

48–51 W1 (width: 22 mm)

OBM 03031616 10SZT

32/29.3/34.5

OGM 03018036 8SZT

52–55 W1 (width: 22 mm)

OBM 03031624 10SZT

35/31.5/38.0

OBM 03031632 10SZT

36/32.5/39.0

OBM 03031640 10SZT

38/34.5/41.5

OGM 03018044 8SZT

56–59 W1 (width: 22 mm)

OGM 03018052 8SZT

60–63 W1 (width: 22 mm)

OBM 03031667 10SZT

40/35.5/42.5

OGM 03018060 8SZT

64–67 W1 (width: 22 mm)

OBM 03031675 10SZT

42/37.2/44.5

OGM 03018079 6SZT

68–73 W1 (width: 24 mm)

OBM 03031691 10SZT

44/38.5/46.5

OBM 03031704 10SZT

46/40.5/48.5

OGM 03018087 6SZT

74–79 W1 (width: 24 mm)

OBM 03031712 10SZT

47/41.4/50.0

OGM 03018095 6SZT

80–85 W1 (width: 24 mm)

OBM 03031720 10SZT

50/43.5/53.0

OGM 03018108 6SZT

86–91 W1 (width: 24 mm)

OBM 03031739 10SZT

51/44.0/54.0

OGM 03018116 6SZT

92–97 W1 (width: 24 mm)

OBM 03031747 10SZT

53/46.0/55.8

OGM 03018124 4SZT

98–103 W1 (width: 24 mm)

OBM 03031755 10SZT

55/46.8/58.0

OBM 03031766 10SZT

13/11.5/15.2

WIRE SELF-LOCKING CLIPS INDEX

Minimum / optimal / maximum size

ODM 02016012 60SZT

7.3/7.6/7.8

ODM 02016020 60SZT

7.8/8.1/8.3

ODM 02016039 60SZT

8.3/8.6/8.8

ODM 02016047 50SZT

8.8/9.1/9.3

ODM 02016055 50SZT

9.3/9.6/9.9

ODM 02016063 40SZT

9.8/10.1/10.4

ODM 02016071 40SZT

10.4/10.7/11.0

ODM 02016080 40SZT

11.0/11.3/11.6

ODM 02016098 40SZT

11.6/11.9/12.3

ODM 02016100 40SZT

12.1/12.8/13.1

ODM 02016119 40SZT

12.9/13.3/13.6

ODM 02016127 40SZT

13.6/14.0/14.4

ODM 02016135 30SZT

14.4/14.8/15.1

ODM 02016143 30SZT

14.8/15.5/15.9

391

ACCESSORIES AND OTHER ITEMS

Set of internal protection rings (9 types/300 pcs.) IC index

4822301

41 pcs.

4822303

IC index

Set of o-rings

seeger 300 pcs.

4822305

IC index

Set of springs

555 pcs.

4822307

IC index

Set of rings

for a drain valve in an oil pan drain valve (15 types/150 pcs.)

4822309

IC index

Set of washers

450 pcs.

4822311

IC index

Electrical connectors heat-shrinking type, 160 pcs.

4822333

contact connectors with heat shrinkable tubes, 60 pcs.

392

4822339

4822312

Electrical connectors contact connectors with heat shrinkable tubes, 60 pcs. IC index

Electrical connectors IC index

4822310

Set of elastic pegs

(6 types/1200 pcs.)

IC index

4822308

Set of washers

seeger 300 pcs.

IC index

4822306

Set of cotter pins

200 pcs.

IC index

4822304

Set of rings

225 pcs.

IC index

4822302

Set of washers

150 pcs.

IC index

(7 types/127 pcs.) IC index

Set of cotter pins IC index

Set of heat-shrink sleeves

4822341

Heat-shrink sleeves 85 pcs. IC index

4822340

ACCESSORIES AND OTHER ITEMS

Set of clamping brackets

Set of nuts

26 pcs. IC index

146 pcs.

4822313

IC index

Set of washers/nuts

Set of crocodile clips

(metal-sheet nuts), 170 pcs. IC index

for metering, 28 pcs.

4822315

IC index

Clamping connectors

400 pcs.

4822318

IC index

Set of lubricators

rubber grommet, 180 pcs.

4822320

IC index

Set of o-rings

419 pcs. IC index

4822323

Plug seals 60 pcs. IC index

720 pcs.

4822322

IC index

Set of o-rings

4822337

4822321

Set of elastic washers

225 pcs. IC index

4822319

Set of washers

(grease fittings), 110 pcs. IC index

4822316

Set of rivets

for cables, 50 pcs. IC index

4822314

4822327

Set of screws and nuts 240 pcs. IC index

4822324

Aluminium washers 300 pcs. IC index

4822330

Set of glass fuses 120 pcs. IC index

4822329

Head-and-hole pins 60 pcs. IC index

4822328

393

LUBRICANTS AND CHEMICALS

Brake cleaner Quick-drying agent for degreasing brake discs, clutch discs and other metal parts. It effectively removes lubricants, oils, brake fluids and other impurities from metal surfaces. It evaporates quickly and leaves no deposits.

Volume: 12 pcs. x 500 ml

Volume: 500 ml IC index

CART00201

IC index

CART00200 K6PCS

IC index

Volume: 12 pcs. x 500 ml IC index

CRC BRAKLEEN PRO K12PCS

CART00202

IC index

Volume: 20 l

CRC BRAKLEEN PRO 5L

IC index

BRAKE CLEAN 500ML

CART00200

Volume: 500 ml

CART00203

Volume: 500 ml

PFC105E

IC index

Volume: 20 l

Volume: 5 l

Volume: 500 ml IC index

CART00201 K12PCS

Volume: 5 l

Volume: 6 pcs. x 750 ml

Volume: 750 ml

CRC BRAKLEEN PRO 500ML

Volume: 20 l + sprayer

CRC BRAKLEEN PRO 20L

IC index

CRC BRAKLEEN 20L SET

12 pcs. x 500 ml IC index

BRAKE CLEAN 500ML X12 PCS

Cleaning of carburettors and injection systems Powerful agents for cleaning throttles, carburettors, injection systems, EGR and turbochargers.

Volume: 400 ml IC index

Volume: 500 ml IC index

CRC CARB & EGR PRO 500ML

Volume: 500 ml IC index

394

MA 20-A22

Volume: 400 ml

CARB CLEAN 500ML

IC index

EGR AND TURBO CLEANER 0,4

Volume: 650 ml IC index

MA 20-A56

LUBRICANTS AND CHEMICALS

Engine-cleaning agent Concentrated agents intended for cleaning engines and removing dirt/stains derived from lubricants, oils and consumable fluids. They perfectly clean salt deposits and other difficult-to-clean impurities. They contain corrosion inhibitors. They do not react with rubber and plastics. Easy to remove even with cold water. They are biodegradable.

Volume: 1 l IC index

Volume: 5 l

MA 20-A32 1L

IC index

Volume: 20 l

MA 20-A33 5L

Rust remover with freezing properties Rust-removing and penetrating agents with cold-shock properties â&#x20AC;&#x201C; aerosol

IC index

MA 20-A39 20L

Penetrating oil with MOS2 Rust-removing and lubricating agents. Penetrating oils with the addition of MoS2 (molybdenum disulphide) â&#x20AC;&#x201C; they dissolve and remove rust, lubricate and stop corrosion.

Volume: 12 x 300 ml IC index

Volume: 400 ml IC index

Volume: 500 ml

CART00205

IC index

CRC ROST FLASH PRO 500ML

Volume: 300 ml IC index

CART00210

CART00210 K12PCS

Volume: 500 ml IC index

CRC RUST OFF PRO 500ML

395

LUBRICANTS AND CHEMICALS

Universal penetrating oil Multi-functional penetrating and lubricating agents. They release corroded screws, lubricate hinges, locks, etc., and eliminate squeaking and creaking.

Volume: 500 ml IC index

Volume: 12 pcs. x 500 ml

CRC 5-56 500ML

IC index

CRC 5-56 K12PCS

Volume: 450 ml IC index

Volume: 500 ml

WD 40 450ML

IC index

RELEASE OIL 500ML

Cleaning of flow-meters

Cleaning agents for air flow-meters. They clean flow-meters with a hot wire and hot plate for the optimal operation of the injection system.

Volume: 12 pcs. x 500 ml IC index

Volume: 250 ml

RELEASE OIL 500ML X12 PCS

IC index

CRC AIR SENSOR CL.P 250ML

Volume: 250 ml IC index

MA 20-A50

Paste used to facilitate the mounting of exhaust system components Resistant to high temperatures (up to 1000°C) and vibrations. It provides connection tightness.

Volume: 150 g IC index

Volume: 150 g

CRC EXHAUST PASTE 150G

IC index

HOLTS FG1PL 150G

General-purpose lubricant White lubricants with added Teflon (PTFE) – aerosol

Volume: 300 ml IC index

HOLTS PRO29A 300ML

Lithium lubricant Multifunctional lithium lubricant,

cartridge, NLGI 2, temp.: -30°C +120°C

Volume: 300 ml IC index

396

CART00206

Volume: 300 ml IC index

CRC WHITE LITHIUM G 300ML

Volume: 400 g IC index

CART00214

LUBRICANTS AND CHEMICALS

Silicone agent Silicone aerosol for gaskets;

Ceramic lubricant White ceramic lubricants, high-temperature (up to 1450 °C) – aerosol

Volume: 300 ml

Volume: 400 ml

it protects rubber parts.

IC index

CART00208

IC index

Volume: 250 ml

CART00211

IC index

Volume: 400 ml

CRC CERAMIC PASTE 250ML

IC index

MA 20-A27

High-grip lubricant

Adhering lubricants – extreme pressure resistance, water washout resistant (also with salt-water); they protect against corrosion. Application: universal lubricants which adhere to drive systems, hinges, door stoppers.

Volume: 400 ml IC index

Volume: 500 ml

CART00212

IC index

CRC CHAIN LUBE PRO 500ML

Volume: 500 ml IC index

CRC MULTILUBE PRO 500ML

Agents used to clean and disinfect air-conditioning systems

Agents used to professionally clean and disinfect air-conditioning systems. They allow to effectively clean the vehicle air-conditioning system. They eliminate bacteria and fungi, refresh and protect against unpleasant odours. Volume: 200 ml IC index

Volume: 400 ml IC index

Volume: 400 ml

CRC AIRCO CLEANER 400ML

IC index

CLIM 400ML

MA 19-535

Volume: 500 ml IC index

K2 W100

”Grenade” agents used to clean and disinfect air-conditioning systems

”Grenade” agents used to clean and disinfect all types of ”grenade” car air-conditioning systems. They quickly remove all kinds of bacteria, fungi, moulds and viruses in vehicle air-conditioning systems which cause unpleasant odours and other allergic reactions. They leave a pleasant and fresh fragrance. ”Grenate” agents are easy to use.

Volume: 100 ml IC index

Volume: 200 ml

CART00225

IC index

CRC AIRCO KLEEN 200ML

Volume: 150 ml IC index

LOC HYGIENE SPRAY 150ML

397

LUBRICANTS AND CHEMICALS

Detergent with active ingredients to combat bacteria and fungi Silicone sealant For vehicle air-conditioning units. It provides long-lasting effects because its active ingredients not only eliminate fungi and bacteria, but also prevent their formation for a long time.

Silicone sealant with its excellent adhesion to all types of surfaces such as metals and plastics. Excellent water/glycol resistance. It does not cause corrosion. ”Selfsqueezing” packaging (aerosol). Application: oil pans, valve covers, camshaft covers, water pumps, thermostat housings. Working temperature range: -55°C to +250°C. Colour: grey

Volume: 5l. 500 ml

Volume: 200 ml

IC index

Volume: 5 l

LOC TEROSEPT SET

IC index

Volume: 5 l

LOC TEROSEPT 5L

IC index

LIM4092

IC index

LOC 5660 200ML

Leak detection agent

Agents for the detection of gas leaks – aerosol

Volume: 400 ml IC index

Volume: 500 ml

CART00213

IC index

CRC ECO LEAK FIND IND 500

Volume: 500 ml IC index

MA 20-A25

Copper lubricant

Copper-based lubricants for protection against baking (-30°C up to 1100°C) – aerosol

Volume: 500 ml IC index

Volume: 250 ml

COPPER EASE 500ML

IC index

CRC COPPER PASTE PRO 250

Volume: 400 ml IC index

MA 20-A10

Agent used to protect and seal threads

Agents used to secure and seal strong and medium-strength threads.

Volume: 50 ml IC index

Volume: 50 ml

CRC SOFT LOCK 50ML

398

LOC 243 50ML

Volume: 50 ml

Volume: 50 ml IC index

IC index

CRC EXTRA LOCK 50ML

IC index

LOC 270 50ML

Volume: 36 ml IC index

PER 60-100

Volume: 50 ml IC index

CRC EASY SEAL 50ML

CUSTOMER SERVICE AND WORKSHOP OPERATION

Check-lists, pendants, service stickers Battery sticker Self-adhesive sticker, to stick on the battery. Having it in our car we always remember battery checks. Package: 100 pcs. IC index

Naklejka akumulator

Battery pendant

Battery pendant. Pendant for placing in a visible place in your vehicle (for example, on the mirror). Any information about the condition of your battery can be clearly and without any problems placed on this pendant. Package: 100 pcs. IC index

Small check-list

List of basic control operations in DL format. Package: 100 pcs. IC index

Lista kontrolna maĹ&#x201A;a

Large check-list

List of control operations. Self-copying blocks, A4. There are 50 sets per block (original + copy). Number of blocks in the order: 5 pcs. IC index

Lista kontrolna duza

Air-conditioning sticker

Self-adhesive sticker, to place in the vehicle. Having it in our car we always remember about control operations in the air conditioning system. Package: 100 pcs. IC index

Naklejka klimatyzacja

Zawieszka akumulator

Check-list pendant

List of basic vehicle service operations. Pendant for placing in a visible place in your vehicle (for example, on the mirror). Package: 100 pcs. IC index

Lista kontrolna zawieszka

Service registration card

Vehicle service registration card. Selfcopying blocks, A4. There are 50 sets per block (original + copy). Number of blocks in the order: 5 pcs. IC index

Karta przyjecia do serwisu

Oil pendant

Oil pendant. With this pendant placed in a visible place in the vehicle, we know immediately what type of oil to use and when to perform the most important service operations. Package: 100 pcs. IC index

Zawieszka olejowa

399

CUSTOMER SERVICE AND WORKSHOP OPERATION

Office equipment – car service centre Service pad – Order Service pad – Order ”Jumbo” Service Board with a side lock and key pocket, DIN A4, colour: grey, quantity: 10 pcs. IC index

E-9015-00560

”Eco” Service Board with a key pocket, DIN A4, colour: grey, quantity: 10 pcs. IC index

Service order board

Service order board, 10 rows, DIN A4, dimensions: 315 x 1.282 mm IC index

E-9019-00106

Service order board, 10 rows, DIN A4, dimensions: 1.575 x 1.285 mm

E-9019-00589

Service order board, 10 rows, DIN A4, dimensions: 554 x 1.282 mm

Set of 5 boards with a mounting rail, colour cards to be marked, width: 170 cm

E-9089-00011

Service order board + white board (for writing) on the back

Aluminium slat for hanging boards, length: 230 cm, with assembly kit, for hanging 7 individual boards

400

E-9019-00125

Service order board

Service order board, 6 rows, DIN A4, dimensions: 575x900 mm IC index

Accessories for order boards E-9089-00015

E-9019-00874

Service order board, mobile type, 9 rows, DIN A4, dimensions: 1.550 x 1.940 mm, white board (for writing) on the back

Service order board

IC index

E-9219-00676-08

Service order board

IC index

Numbered card for a service order pad. Contains: key band, 3 types of labels, colour: blue, quantity: 300 pcs. IC index

IC index

Service order board IC index

E-9015-00385

Vehicle registration card

E-9019-00588

Accessories for order boards

Distance wheel to be used with your board. By using a slat, you can move the board horizontally. IC index

E-9089-00017

NEW

CUSTOMER SERVICE AND WORKSHOP OPERATION

Protective foil covers for car seats, with the Q-SERVICE PREMIUM logo,

Protective foil covers for car seats, with the Q-SERVICE logo

100 pcs. per roll IC index

roll: 100 pcs. IC index

QS173

IC index

Protective foil covers for car seats, with the Perfect Service logo, 100 pcs. per roll

roll: 500 pcs. IC index

QS174

Tyre bags made of foil, white colour, with no imprint. 100x100 mm. Roll: 100 pcs. IC index

roll: 100 pcs.

QS172*

roll: 250 pcs. IC index

QS172 PREMIUM

Protective foil covers for car seats

IC index

QS172PS

90x100 mm. Roll: 100 pcs.

QS408R

IC index

roll: 250 pcs. IC index

Tyre bags made of foil, with the Q-Service logo. QS401

QS172*-B

QS173-B

IC index

QS174-B

Tyre bags made of foil, with the Q-Service PREMIUM logo. 90x100 mm. Roll: 100 pcs. IC index

QS PREMIUM 408

Tyre bags made of foil, with a descriptive

imprint. 90x100 mm. Roll: 100 pcs. IC index

roll: 500 pcs.

imprint. 120x120 mm. Roll: 100 pcs.

QS408

IC index

QS408XL

90x100 mm. 4 pcs. For 1 set of tires. IC index

MMT T014 001

STRETCH-type protective foil (wrapper) for wrapping the steering wheel, 150 m per roll IC index

QS169*

Protective cover for the steering wheel, 250 pcs. per pack IC index

QS168

Rug foil 40x50 mm roll: 250 pcs. IC index

QS404

roll: 250 pcs. IC index

QS405

401

CUSTOMER SERVICE AND WORKSHOP OPERATION

Protective seat cover reusable, black colour, made of PORTO non-woven material IC index

MMT CP10030

Protective seat cover reusable, black colour, made of FORTA eco-leather Index IC

MMT CP10031

Protective fender cover Protective fender cover reusable, black colour, made of non-woven fabric reusable, black colour, made of eco-leather IC index

MMT CP10032

Index IC

MMT CP10033

Protective seat cover reusable, black colour, made of DURABLE waterproof nylon Index IC

MMT CP10034

Protective cover on the front of your car it covers vehicle fenders and its front part, black colour, made of non-woven fabric Index IC

MMT CP10036

CLASSIC tarpaulin PERFECT tarpaulin PERFECT SUV/VAN tarpaulin high-quality cover for the whole car, black colour three-layer, multi-season cover for the whole car, three-layer multi-season plastic cover with UV size: M Index IC

MMT CP10020

size: M

size: L

MMT CP10024

size: L

MMT CP10021

Index IC

size: XL Index IC

coating, waterproof type

Index IC

size: L Index IC

grey colour

Index IC

MMT CP10027

size: XL

MMT CP10025

Index IC

MMT CP10028

size: XL

MMT CP10022

Index IC

MMT CP10026

Protective tarpaulin (half-tarpaulin, grey colour) HALF size: L Index IC

402

size: XL

MMTCP10015

Index IC

MMTCP10016

NOTES

INTERCARS.EU/EN/CONTACT