ABN 88 612 934 451
PO Box 293 Picton NSW 2571
P 02 46778000 | F 02 4677 3890
E info@intrimgroup.com.au | www.intrimgroup.com.au
Product IntrimIHR10TimberHandrailSystem Project
1. The Intrim IHR10 Vic Intrim Oak Modular Handrail System is manufactured from 316 stainless steel and Kiln Dried Victorian Intrim Oak which is sourced from certified Sustainable Forests.
2. A Microbial Resistant, hard wearing, 3 stage coating is applied to timber rail ensuring maximum resistance to bacteria and fungi. A join will be applied for any wall lengths greater than 3.6m.
3. Accessories including support brackets are 316 grade Stainless Steel. Theminimum clearancefrom wall to back of handrail is 52mm in order to comply with AS1428.1.
4. Unique installation system for attaching handrail to wall. Also, ensures bends/returns can be replaced with ease if required.
5. Standard cleaning procedures can be used to clean the Intrim IHR10 Handrail system. A mixture of detergent and warm water solution is recommended. Disinfectant can also be used. The coating has been tested with 100% bleach solution.
6. Installation process should be followed as per recommended installation instructions.
7. Available as LED Lit Option.
8. Maintenance. Normal care should be taken for timber handrail as is the case for any timber product to ensure longevity. If required and based on volume of usage, timber may be sanded and recoated.
9. Complies with Australian standard AS1428.1-2009.
10.15 Year Warranty. This warranty excludes normal wear and tear which comes with a handrail system in a health situation.
The Intrim IHR10 Handrail System is manufactured in Sydney.
Contact 1800 622 081 or email info@intrimgroup.com.au for further technical support