BY DR. HENRIKE WONNEBERGER
Dr. Henrike Wonneberger is COO and co-founder of BASF-owned, Replique.
BRIDGING THE GAP BUILDING A RESILIENT SUPPLY CHAIN Optimizing the supply chain contains huge potential for OEMs to increase profitability. Reducing inventory costs with punctual delivery has been, for many years, the focus of supply chain management. Over the years, supply chains have been optimized to perfection, using algorithms and digital tools, but it is a balance on a knife’s edge. The COVID-19 pandemic and the subsequent closing of borders have revealed the limits of planning and the fragility of supply chains to suppliers, OEMs and end customers. MITIGATING SUPPLY CHAIN RISKS When a part is needed urgently, every hour can cost manufacturers hundreds and thousands of dollars with the cost of the spare part itself often negligible compared to the economic and reputational damage caused by its absence. Increasing the buffer in warehouses could minimize the risk of supply gaps but counteracts previous efforts to reduce inventory. It can also increase tied up capital, warehousing costs and obsolescence. 20 JUNE 2022
SP Jun 22.indd 20
Another option is to source from several suppliers in multiple locations. Should one supplier fail, others can cover the demand. However, interconnected global supply chains are often dependent on a few suppliers of basic materials. Subsequently, for specific parts or components, all worldwide suppliers might be affected by the material shortage. A better solution lies not only in supplier diversification, but also material alternatives. A third way to improve the resilience of the supply chain is to return to localized manufacturing, as witnessed at the beginning of the pandemic. This saw many manufacturers 3D-print critical parts needed to fight COVID-19, such as face shields or valves for respiratory devices. This manufacturing philosophy, also named bridge manufacturing, can be used as a blueprint to improve supply chain resilience. Essentially, bridge manufacturing means having a technically viable alternative to bridge a gap. This gap can be economic if other technologies are too expensive, or an availability gap, if parts pro-
duced by another manufacturing technology are unavailable. Bridge manufacturing requires a manufacturing alternative for the part that allows on-demand, decentralized production. This ensures the part can easily be made available anywhere globally in the event of a sudden unexpected shortage. Consequently, should supply chains be disrupted, the OEM or supplier has alternative options, potentially saving money and reputation. As a concept, bridge manufacturing comprises three different types: provisional solution, equivalent manufacturing solution, and ramp-up-phaseout bridging. PROVISIONAL SOLUTIONS Well known in dentistry, this is where a transitional prosthesis – using a different material and a different technology – is provided as a makeshift solution while the actual prosthesis is manufactured. Requirements for a makeshift solution are often lesser than for the original, making bridge manufacturing a second-best alternative from a technological standpoint.
Whether a part is used as a stopgap until the ‘original’ spare part is delivered, or until it breaks down and is replaced by the ‘original’ spare part, bridge manufacturing of the part takes place in parallel to ordering a standard ‘original’ spare part. Like this, the machine downtime is reduced in the same way, saving the OEM money and reputation. EQUIVALENT MANUFACTURING However, bridge manufacturing can meet all requirements and specifications of the ‘original’ part. In this case, bridge manufacturing might be more expensive in a regular supply chain situation, making it inappropriate for standard production, but it might have certain advantages when other constraints occur. For example, a polymer part could be manufactured at low cost per part in large quantities in a central location. In the event of a global supply chain disruption and the part is needed overseas, this can be bridged by localized 3D printing close to where it’s needed in the required (probably low) quantity. SUPPLY PROFESSIONAL
2022-06-20 2:34 PM
