SR Phonares II_en

SR

Phonares II ÂŽ

Expressive esthetic denture teeth

Natural-looking tooth moulds for sophisticated needs

NATURAL – LIFELIKE

SR

Phonares II ®

Expressive esthetics Highest expectations Today’s denture users behave differently; their expectations have grown. For instance, natural-looking esthetics has become an essential criterion in denture prosthetics. Implant-supported restorations are today often the preferred treatment option to satisfy the need for esthetics. However, these restorations tend to be exposed to significantly higher chewing forces. Therefore, material strength and tolerance play a particularly ­critical role in implant prosthetics.

Material structure The NHC material used in SR Phonares II is characterized by high strength. Excellent wear resistance and tolerant, resistant ­behavioural characteristics set this material apart.

Lifelike shade effect The refractive indices of the individual fillers are coordinated with each other to enhance the natural shade effect of the material and facilitate shade selection for the restoration.

Ideal range of shades Shade selection to determine the appropriate tooth shade is performed with a SR Phonares II shade guide. Since this guide features the same layer structure and material as the teeth, shade deviations are minimized. ­General shade selection may also be performed by means of an A-D shade guide with Bleach shades.

The SR Phonares II teeth are available in 16 A-D shades and 4 Bleach shades.

UDMA matrix High-density silanized SiO2 Inorganically filled UDMA polymer Silanized SiO2 particles PMMA clusters

USING NATURE AS A GUIDE

On the test bench Several test methods have been employed to simulate the clinical durability of the material.

Shear strength The heightened inherent strength of the material improves its shear strength and is indicative of its toughness.

Compressive strength SR Phonares II demonstrated the highest compressive strength of the materials tested. The SR Phonares II teeth withstood higher loads than the teeth of the comparative group.

EN ISO 10477 performance

EN ISO 9917-1 performance

30 25 20 15 10 5 0

Highly cross-linked PMMA

Composite

R&D Ivoclar Vivadent AG, 08/2011, Schaan, FL

Phonares II

Pin on block With steatite antagonists, after 12,000 cycles

700 600

300

500

250

Wear in Âľm3

Compressive strength in MPa

Shear strength in MPa

35

Wear of denture teeth The NHC material ensures a favourable level of resistance to wear.

400 300

200 150

200

100

100

50

0

Highly cross-linked PMMA

Composite

Phonares II

R&D Ivoclar Vivadent AG, 08/2011, Schaan, FL

0

Highly cross-linked PMMA

Composite

Phonares II

Dr Dipl.-Ing. (FH) Martin Rosentritt, 12/2011, University of Regensburg, Germany

HIGHLIGHTS AT A GLANCE Indication Esthetics Wear resistance Occlusal options

Partial, combination, complete and implant prosthetics

NATURAL ANTERIOR MOULDS

SR

Phonares II ®

The SR Phonares II tooth moulds have been designed for a maximum of pure beauty and vitality in the anterior region. They offer the same expressive characteristics as their ­natural counterparts and give you excellent opportunities to create dental restorations ­inspired by nature.

Carefully honed esthetics • Unparalleled surface characteristics • Harmonious distribution of translucency, opalescence and fluorescence

Impressive functionality • Lifelike “white esthetics” due to specially designed interdental closures • Easy setup of anterior teeth due to proximal “Set&Fit” design

Individually layered tooth The tooth moulds are specifically layered to suit the characteristics of each individual tooth shape. The innovative injection moulding technology used in the manufacturing of the teeth fuses the individual tooth layers seamlessly together. The lifelike esthetic qualities are optimally supported in the process.

A RANGE OF TOOTH MOULDS DESIGNED TO MATCH THE AGE AND CHARACTERISTICS OF THE INDIVIDUAL PATIENT

SOFT

YOUTHFUL

• Unabraded incisal edge • Pronounced facial curvature

BOLD

UNIVERSAL

• Slightly abraded incisal edge • Reduced facial curvature

MATURE

• Heavily abraded incisal edge • Flat facial curvature

Combination prosthetics made easy SR Nexco® – lab composite in a paste delivery form. The shades of this material are precisely coordinated with those of the SR Phonares II teeth, facilitating the restorative procedures in combined prosthetics.

IvoBase® – high-precision, pre-dosed denture base material. This material endows ­removable dental prostheses with a superior quality.

Delivery forms SR Phonares II 18 upper anterior moulds 6 lower anterior moulds ®

Upper jaw: complete denture; lower jaw: combination denture with telescope crowns

UNIVERSAL POSTERIOR MOULDS

SR

Phonares II ®

Typ

The SR Phonares II Typ is suitable for a wide range of applications and is therefore the ­classic denture tooth for partial and complete dentures.

This tooth is easily aligned with the tooth of the opposing jaw – a ­characteristic which makes the SR Phonares II Typ particularly cost-effective.

Classic occlusion

Intercuspation

One-to-two setup

POSTERIOR MOULDS TYP AND LINGUAL Delivery forms SR Phonares II Typ 3 maxillary sets 3 mandibular sets ®

Time-saving ridge-lap design The anatomically shaped tooth base can be ­easily adjusted to the alveolar ridge or ground to fit over the construction component.

Widely dimensioned facial and cervical ­surfaces These dimensions are ideal for covering implant abutments and other construction components.

IMPLANT-SUPPORTED POSTERIOR MOULDS

SR

Phonares II ÂŽ

Lingual

The SR Phonares II Lingual has been especially designed to offer the option of lingualized occlusion. This setup technique is increasingly used in hybrid and implant prosthetics.

The ideal distribution of oral forces, combined with the high wear resistance of the material, create optimal conditions for the longevity of the dentures.

Lingualized occlusion

Intercuspation

One-to-one setup

Delivery forms SR Phonares II Lingual 3 maxillary sets 3 mandibular sets ÂŽ

One-to-two setup

Removable Prosthetics

SR Phonares® II forms a part of the “Removable Prosthetics” product category. The products of this category cover the procedure involved in the fabrication of removable dentures – from treatment planning and impression taking to aftercare. The products are optimally coordinated with each other and enable successful processing and application.

Virtual®

UTS®

Stratos®

Teeth

Denture Base Material

Cervitec®

PREPARE

REGISTER

SET UP

PROCESS

FINISH

MAINTAIN

THESE ARE FURTHER PRODUCTS OF THIS CATEGORY:

Stratos

Denture Base Material Cervitec

Tried-and-tested articulators

Antibakterielle Easy and reliable Mundpflege to use

®

®

Gesundes Zahnfleisch, gesunde Zähne

Convincing quality and precision Simulation of jaw movements to ensure high-quality restorations in removable and fixed denture prosthetics

Die Cervitec-Produkte tragen massgeblich dazu bei, Zähne, Kronen, Brücken und Implantate langfristig zu sichern.

Impressive versatility and precision Predosed or conventional, for more convenient use Materials suitable for the injection, packing and pouring technique • Meets many different needs with regard to strength • •

Would you like to know more about the products of the “Removable Prosthetics” category? Simply get in touch with your contact person at Ivoclar Vivadent or visit www.ivoclarvivadent.com for more information.

Ivoclar Vivadent AG Bendererstr. 2 9494 Schaan Liechtenstein Tel. +423 / 235 35 35 Fax +423 / 235 33 60 www.ivoclarvivadent.com

Descriptions and data constitute no warranty of attributes. © Ivoclar Vivadent AG, Schaan 644130/en/2013-02-14