STEP-BY-STEP WITH
Jana Ewy
THE TECHNIQUE OF INTERCHANGE
STEP-BY-STEP
1
JANA EWY
Choose a pleasing color combination and apply a Splash of color, using alcohol inks on Mother of Pearl Friendly Plastic.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
2
JANA EWY
Place the plastic sticks onto the baking sheet. Place the baking sheet onto the preheated griddle and allow the plastic to soften.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
3
JANA EWY
Remove the baking sheet from the griddle. While the plastic is still warm, cut the circles by pressing the cutter into the softened plastic. Dip the cutter back into the cold water after each cut. This will help keep it from sticking to the plastic. Allow the plastic to cool. You may place the pan under cold running water to speed the cooling process along.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
4
JANA EWY
Use the needle tool to press under the edges of the cooled plastic and remove it from the pan. Pop out the circles. If needed use a craft knife to cut around each one.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
1
JANA EWY
Place the plastic sticks back onto the baking sheet. INTERCHANGE the colors and replace each of the circles.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
6
JANA EWY
Place the baking sheet back onto the heated griddle and allow the plastic to soften and seal back together. Tip: this is a perfect time to consider the placement of the cutter for your next cuts.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
7
JANA EWY
Remove the baking sheet from the griddle. While the plastic is still warm, position the cutter so that you get an interesting design and cut the ovals by pressing the cutter into the softened plastic. Allow the plastic to cool. You may place the pan under cold running water to speed the cooling process along.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
8
JANA EWY
Use the needle tool to press under the edges of the cooled plastic and remove it from the pan. Pop out the ovals. If needed use a craft knife to cut around each one.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
9
JANA EWY
Mix the Envirotex Lite resin following the manufactures instructions. Apply a thin coat to each of the oval cabochons. Allow to dry. Tip: I like to place my pieces on a non-stick surface. Held in place by doublesided tape. This way if there is any run off, it will be easy to remove later. Pour the Envirotex into a small squeeze bottle. The application will be more precise. Once the resin has been applied, blow softly through a straw over each piece to pop any bubbles that remain. Envirotex cures completely in 24 hours.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
10 All Rights Reserved
JANA EWY
Gather all the tools, jewelry supplies and components and begin the assembly process. Glueing the cabochons into fancy settings helps take your design from fine to fabulous.
Jana Ewy
STEP-BY-STEP
11
JANA EWY
Don’t be afraid to mix things up. The unexpected is always more exciting.
All Rights Reserved
Jana Ewy
STEP-BY-STEP
JANA EWY
FRIENDLY PLASTIC BEADS
TOOLS & MATERIALS Friendly Plastic Designer stick: Mother of Pearl Alcohol inks Blending solution Cutters; round and oval Craft knife Griddle: (set at 200-250 degrees) Jewelry supplies and findings Small bowl of ice-water Needle tool Non-stick baking sheet Paint brush / make-up sponges Scissor Envirotex Lite resin sealer Mixing container, stir stick and straw
For more information and design inspiration, visit:
My Blog & Just Bananas.com
for Friendly Plastic Designer Sticks and related supplies, visit: All Rights Reserved
the
Friendly Plastic
supply store
Jana Ewy