Adding grouped channels

The procedure for creating steps in the Blind Effects display by adding grouped channels from cues or submasters to them is shown below. All channels in a group or focus point are added to the step(s) together but they may be edited individually later.

Keystrokes: Actions:

1. Press [S1], Step, and enter the step number. A new step must always have the next highest number, beginning with step 1. Specifies next step to be created Prompt reads:

Select step number(s) (To clear step(s), select step number(s), then press CLEAR)

2. Press [Group] [Cue] [5] [Thru] [1][0].a

Selects the channels of cues 5 through 10 Prompt reads:

Group mode - Select focus point(s) and press ADD CHANNELS to add to step(s), or press AT to edit existing channel level(s)

3. Press [S8], Add Adds channels to step at level 50

Channels, [At] [5][0]. Prompt reads:

Group mode - Select focus point(s) and press ADD CHANNELS to add to step(s), or press AT to edit existing channel level(s)

4. Press [Record] [Enter]. Records the channels to the effect step Prompt reads:

Select cue number To write effect, press STEP

a. To add grouped submasters rather than grouped cues, press [Submaster] rather than [Cue] in this step.