Adding grouped channels The procedure for creating steps in the Blind Effects display by adding grouped channels from cues or submasters to them is shown below. All channels in a group or focus point are added to the step(s) together but they may be edited individually later. Keystrokes:
Actions:
1. Press [S1], Step, and enter the step number. A new step must always have the next highest number, beginning with step 1.
Specifies next step to be created Prompt reads: Select step number(s) (To clear step(s), select step number(s), then press CLEAR)
2. Press [Group] [Cue] [5] [Thru] [1][0].a
Selects the channels of cues 5 through 10 Prompt reads: Group mode - Select focus point(s) and press ADD CHANNELS to add to step(s), or press AT to edit existing channel level(s)
3. Press [S8], Add Channels, [At] [5][0].
Adds channels to step at level 50 Prompt reads: Group mode - Select focus point(s) and press ADD CHANNELS to add to step(s), or press AT to edit existing channel level(s)
4. Press [Record] [Enter].
Records the channels to the effect step Prompt reads: Select cue number To write effect, press STEP
a.
To add grouped submasters rather than grouped cues, press [Submaster] rather than [Cue] in this step.
Express two scene preset User Manual
203
