
Contact details
Telephone:.
Mobile/Cell:
e-mail:
e-mail:
e-mail:
Website.
Office:
John Paulding Associates
Unit 8A Hinxton Road, Duxford, Cambridgeshire
CB22 4SD
United Kingdom
Contact details
Telephone:.
Mobile/Cell:
e-mail:
e-mail:
e-mail:
Website.
Office:
John Paulding Associates
Unit 8A Hinxton Road, Duxford, Cambridgeshire
CB22 4SD
United Kingdom
https.johnpaulding.co.uk
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN
Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
Burton Power is offering a limited number of brand new genuine Ford bare cylinder heads for the 2.0/2.3 Duratec HE I4 engines.
These incorporate the preferred hi-port design (RF6S4E casting mark) which has the ability for a greater flow than the low port design.
The Burton High Port Cylinder Heads are for the non-VVT engine type and are supplied bare but are factory fitted with valve guides and valve seats.
Order as part number RF6S4E at £1,020.00 incl. VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
Burton Power can now provide a Powergrip toothed belt conversion for the alternator and water pump on a Ford SOHC Pinto engine.
The alternator pulley in this new Burton kit will fit 15mm alternator shafts although Burton can also provide a similar version for 17mm shafts (use part number: FT1054K/17).
Drive ratios are 1.08:1 for the water pump and 1.86:1 for the alternator.
Order the complete kit comprising crankshaft, water pump and alternator pulleys, and toothed belt as part number FT1054K at £204.95 incl. VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
for classic 1970 on 850cc Minis
In 1970, 850cc Minis with engine number 85H101on had a remote type gearbox case. This was fitted with a ‘magic wand’ type gear lever which was held up by a plate underneath. This type of gear change requires a detent spring, which in time can lose its effectiveness or even break.
Fortunately, Mini Spares has the answer and can offer a detent spring for these pre-rod type gearboxes as part number 2A3647 at just £2.16 incl. VAT
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
for classic Minis and other
No doubt many Minis and other A Series classics will be undergoing engine rebuilds over the winter, so Mini Spares is offering two types of rocker shaft end washers which should always be replaced when performing a top-end overhaul.
Rocker Shaft End Washer - part number 6K555 - is the standard end washer for the rocker shaft. Priced at £0.96 each incl. VAT
Rocker Shaft Spring Washer - part number 2A18 - is a spring washer that goes on both ends of the rocker shaft to keep tension on the #1 & #8 rockers and is priced at £0.64 each incl. VAT.
Mini Spares can also supply rocker shaft spacer shims or a complete kit.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
Mini Spares is constantly introducing its own products to make your classic Mini even better than original and the latest example is a superb extra strong timing chain with very limited stretch. The chain uses modern day materials and technology to keep the timing correct and will fit any A Series engine that uses a single row chain.
This chain saves all the time and effort required in replacing standard chains and is unquestionably worth the slightly extra cost.
This chain and single wheel set up is also suitable for racing engines as it saves weight and resolves problems with timing covers fouling (as often encountered with duplex chain set ups). There is the added bonus of improved longevity - even in a highly tuned engine.
Mini Spares recommends that a new lock tab is fitted whenever a timing chain is replaced and therefore a new lock tab is included in this package.
Order as part code: SIMPLEX-EVO at £84.60 incl. VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Following the success of the Webcon 45DCOE classic power performance kit for the BMW M10 2.0 for road and fast road use, Webcon is now pleased to announce the launch of a twin 48DCO/SP kit to suit highly modified engines and race use.
The kit features a pair of authentic, Spanish Weber 48DCO/SP carburettors, plus a premium quality, UK manufactured Webcon intake manifold with linkage system to ensure peak performance under the most demanding of conditions.
The package even includes a free Weber DCOE Tuning Guide to get you started.
Order as part number PBM201-48. Available from stock priced at £1,940 plus VAT.
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon is pleased to announce the introduction of a direct replacement Weber carburettor kit to suit the 1983-86 Volkswagen LT van fitted with a 2400cc engine and an OEM Pierburg 2B6 carburettor.
Superbly manufactured in the UK by Webcon, the new kit features an authentic Spanish Weber 32/34 DMTL carburettor specifically jetted to suit the LT 2.4 motor. The kit also includes all the adaptors, nuts, bolts, gaskets, etc required to carry out the conversion.
Improved hot and cold starting, enhanced economy and smoother engine operation are just some of the benefits associated with the fitment of a Webcon direct replacement carburettor kit.
At just £504 plus VAT part number 1889080600L is a perfect upgrade for any LT 2.4 van.
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Following the success of the recently relaunched Weber DCOE service manual, Webcon is pleased to announce the reintroduction of the Weber IDA3C and IDS service manual.
Originally created by Weber in the 1960s, the IDA3C service manual is packed with in depth service and repair information direct from Weber. It is a fantastic insight into this family of carburettors written by the people who designed it.
Printed in English and German, this new manual is essential reading for anyone who owns or services 40IDA3C, 40 IDS3C or 46IDA3C carburettors, as well as anyone who enjoys owning and reading period automotive memorabilia.
Part number 9500005600 is in stock now, and is priced at just £9.95 (VAT zero rated in UK)
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk