6
CONTROL
Your JVA Z28 security energizer has been designed for ease of operation. It may be armed and disarmed using any of the following: • Key switch or remote switch connected to the control input (IN1) • Remote control radio receiver connected to IN1 • Z-Series Keypad (LCD or Touch) • Cloud Router via a JVA cellular gateway or wifi gatewat • Windows PC running JVA Perimeter Patrol
NOTE: More than one method may be used in the one installation.
6.1
ARMING THE FENCE USING THE KEYPAD.
Control
• Low level interface (wired to control inputs and relay outputs) from a third party security alarm panel or Physical Security Information System (PSIM)
Enter your User PIN # (Default User PIN is 1234). Make sure the red ARM light comes on. • The keypad will beep twice to confirm that the system is armed. • The fence will power up and if all is well (no faults) the system will be ready to deter and detect. • If there is a fault on the fence and it cannot achieve full voltage, the Fence LED will indicate that there is a fault. • To disarm the system, enter your User PIN and press #.
JVA Z28 Manual
Page 33
