Retaining Magnet Assemblies
Retaining Magnet Assemblies GN 50.1 Retaining Magnet Assemblies Disc-Shaped, without Thread Metric Size, Steel
X
Page 1
GN 50.25 Retaining Magnet Assemblies with Threaded Bushing Metric Size, Stainless Steel X
Page 7
GN 58 Pot Magnet Assemblies with Thru Hole Metric Size, Steel X
Page 10
GN 51.3 Retaining Magnet Assemblies Disc-Shaped, with Threaded Stud and Rubber Jacket Metric Size, Steel X
Page 13
GN 54.1 Retaining Magnet Assemblies Rod-Shaped, with Smooth Finish Metric Size, Brass X
Page 17
GN 52.4 Retaining Magnet Assemblies Rod-Shaped, with Stud Metric Size, Steel X
Page 22
Types of Retaining Magnet Assemblies
X
2
Page 26
GN 50.3 Retaining Magnet Assemblies Disc-Shaped, with Threaded Stud Metric Size, Steel X
Page 3
GN 50.4 Retaining Magnet Assemblies Disc-Shaped, with Thru Hole Metric Size, Steel X
Page 8
GN 51.2 Retaining Magnet Assemblies Disc-Shaped, with Threaded Bushing and Rubber Jacket Metric Size, Steel X
Page 11
GN 51.4 Retaining Magnet Assemblies Disc-Shaped, with Thru Hole and Rubber Jacket Metric Size, Steel X
Page 14
GN 52.2 Retaining Magnet Assemblies Rod-Shaped, with Internal Thread Metric Size, Steel X
Page 19
GN 60 Button-type Magnets with Thru Hole Metric Size, Steel X
Page 24
Materials Composition of Retaining Magnet Assemblies
X
Page 27
GN 50.2 Retaining Magnet Assemblies Disc-Shaped, with Threaded Bushing Metric Size, Steel X
Page 5
GN 50.45 Retaining Magnet Assemblies Disc-Shaped, with Thru Hole Metric Size, Stainless Steel X
Page 9
GN 51.5 Retaining Magnet Assemblies Disc-Shaped, with Internal Thread and Rubber Jacket Metric Size, Steel X
Page 12
GN 52.1 Retaining Magnet Assemblies Rod-Shaped, with Smooth Finish Metric Size, Steel X
Page 15
GN 52.3 Sandwich Magnet Assemblies Rod-Shaped, with Internal Thread Metric Size, Steel X
Page 21
GN 62 U-Shaped Magnets with Thru Hole Metric Size, Steel X
Page 25
Pulling Force Information for Retaining Magnet Assemblies
X
Page 28
J. W. Winco Retaining Magnet Assemblies
GN 50.1 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWKRXW 7KUHDG š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 50.1 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type), samarium and cobalt combination AlNiCo (SC type), or neodymium, iron and boron version NdFeB (ND type)
Mount in place with glue or with a side-mounted side screw (for example, GN 913.2 grub screw with pointed nose).
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Types HF and SC temperature resistant to 390°F (200°C), Type ND temperature resistant to 175°F (80°C).
HF Type
Dimensions in: millimeters (inches)
Part Number
d Dia.
d tolerance
h Thickness
h tolerance
Nominal Pulling Forces [N]
50.1-HF-10
10 (.39)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
4
50.1-HF-13
13 (.51)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
10
50.1-HF-16
16 (.63)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
18
50.1-HF-20
20 (.79)
±.1 (±.004)
6 (.24)
+.2/-.1 (+.008/-.004)
30
50.1-HF-25
25 (.98)
±.1 (±.004)
7 (.28)
+.3/-.1 (+.012/-.004)
40
50.1-HF-32
32 (1.26)
±.1 (±.004)
7 (.28)
+.3/-.1 (+.012/-.004)
80
50.1-HF-40
40 (1.57)
+.2/-.1 (+.008/-.004)
8 (.31)
+.4/-.1 (+.016/-.004)
125
50.1-HF-50
50 (1.97)
+.2/-.1 (+.008/-.004)
10 (.39)
+.5/-.1 (+.020/-.004)
220
50.1-HF-63
63 (2.48)
+.3/-.1 (+.012/-.004)
14 (.55)
+.5/-.1 (+.020/-.004)
350
50.1-HF-80
80 (3.15)
+.5/-.1 (+.020/-.004)
18 (.71)
+.5/-.1 (+.020/-.004)
600
50.1-HF-100
100 (3.94)
+.5/-.1 (+.020/-.004)
22 (.87)
+.5/-.1 (+.020/-.004)
900
50.1-HF-125
125 (4.92)
+.5/-.1 (+.020/-.004)
26 (1.02)
+.5/-.1 (+.020/-.004)
1300
J. W. Winco Retaining Magnet Assemblies
1
GN 50.1 | Retaining Magnet Assemblies _ 'LVF 6KDSHG š :LWKRXW 7KUHDG š 6WHHO š 0HWULF 6L]H
SC Type
Dimensions in: millimeters (inches)
Part Number
d Dia.
d tolerance
h Thickness
h tolerance
Nominal Pulling Forces [N]
50.1-SC-6
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
5
50.1-SC-8
8 (.31)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
11
50.1-SC-10
10 (.39)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
20
50.1-SC-13
13 (.51)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
40
50.1-SC-16
16 (.63)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
60
50.1-SC-20
20 (.79)
±.1 (±.004)
6 (.24)
±.1 (±.004)
90
50.1-SC-25
25 (.98)
±.1 (±.004)
7 (.28)
±.2 (±.008)
150
50.1-SC-32
32 (1.26)
±.1 (±.004)
7 (.28)
±.2 (±.008)
220
ND Type
2
Dimensions in: millimeters (inches)
Part Number
d Dia.
d tolerance
h Thickness
h tolerance
Nominal Pulling Forces [N]
50.1-ND-6
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
5
50.1-ND-8
8 (.31)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
13
50.1-ND-10
10 (.39)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
25
50.1-ND-13
13 (.51)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
60
50.1-ND-16
16 (.63)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
95
50.1-ND-20
20 (.79)
±.1 (±.004)
6 (.24)
±.1 (±.004)
140
50.1-ND-25
25 (.98)
±.1 (±.004)
7 (.28)
±.2 (±.008)
200
50.1-ND-32
32 (1.26)
±.1 (±.004)
7 (.28)
±.2 (±.008)
350
J. W. Winco Retaining Magnet Assemblies
GN 50.3 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUHDGHG 6WXG š 6WHHO š 0HWULF 6L]H
Housing and threaded stud Steel, zinc plated
GN 50.3 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type),or neodymium, iron and boron version NdFeB (ND type)
Type HF temperature resistant to 390°F (200°C), Type ND temperature resistant to 175°F (80°C).
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
HF Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2 thread
l Length
h Thickness
h tolerance
Nominal Pulling Forces [N]
50.3-HF-10-M3
10 (.39)
±.1 (±.004)
M3 x .5
7 (.28)
4.5 (.18)
+.2/-.1 (+.008/-.004)
4
50.3-HF-13-M3
13 (.51)
±.1 (±.004)
M3 x .5
7 (.28)
4.5 (.18)
+.2/-.1 (+.008/-.004)
10
50.3-HF-16-M3
16 (.63)
±.1 (±.004)
M3 x .5
7 (.28)
4.5 (.18)
+.2/-.1 (+.008/-.004)
18
50.3-HF-20-M3
20 (.79)
±.1 (±.004)
M3 x .5
7 (.28)
6 (.24)
+.2/-.1 (+.008/-.004)
30
50.3-HF-25-M4
25 (.98)
±.1 (±.004)
M4 x .7
8 (.31)
7 (.28)
+.3/-.1 (+.012/-.004)
40
50.3-HF-32-M4
32 (1.26)
±.1 (±.004)
M4 x .7
8 (.31)
7 (.28)
+.3/-.1 (+.012/-.004)
80
50.3-HF-47-M6
47 (1.85)
+.2/-.1 (+.008/-.004)
M6 x 1.0
8 (.31)
9 (.35)
+.5/-.1 (+.020/-.004)
80
50.3-HF-63-M6
63 (2.48)
+.3/-.1 (+.012/-.004)
M6 x 1.0
15 (.59)
14 (.55)
+.5/-.1 (+.020/-.004)
350
J. W. Winco Retaining Magnet Assemblies
3
GN 50.3 | Retaining Magnet Assemblies _ 'LVF 6KDSHG š :LWK 7KUHDGHG 6WXG š 6WHHO š 0HWULF 6L]H
ND Type
4
Dimensions in: millimeters (inches)
Part Number
d Dia.
d tolerance
d2 thread
l Length
h Thickness
h tolerance
Nominal Pulling Forces [N]
50.3-ND-10-M4
10 (.39)
±.1 (±.004)
M4 x .7
8 (.31)
4.5 (.18)
±.1 (±.004)
25
50.3-ND-13-M5
13 (.51)
±.1 (±.004)
M5 x .8
8 (.31)
4.5 (.18)
±.1 (±.004)
60
50.3-ND-16-M6
16 (.63)
±.1 (±.004)
M6 x 1.0
8 (.31)
4.5 (.18)
±.1 (±.004)
95
50.3-ND-20-M6
20 (.79)
±.1 (±.004)
M6 x 1.0
10 (.39)
6 (.24)
±.1 (±.004)
140
50.3-ND-25-M6
25 (.98)
±.1 (±.004)
M6 x 1.0
10 (.39)
7 (.28)
±.2 (±.008)
200
50.3-ND-32-M6
32 (1.26)
±.1 (±.004)
M6 x 1.0
10 (.39)
7 (.28)
±.2 (±.008)
350
J. W. Winco Retaining Magnet Assemblies
GN 50.2 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUHDGHG %XVKLQJ š 6WHHO š 0HWULF 6L]H
Housing and threaded bushing Steel, zinc plated
GN 50.2 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type), samarium and cobalt combination AlNiCo (SC type), or neodymium, iron and boron version NdFeB (ND type)
Types HF and SC temperature resistant to 390°F (200°C), Type ND temperature resistant to 175°F (80°C).
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
HF Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2 thread
d3
d3 tolerance
h Thickness
h tolerance
l
t min.
Nominal Pulling Forces [N]
50.2-HF-10-M3
10 (.39)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
7 (.28)
5 (.20)
4
50.2-HF-13-M3
13 (.51)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
7 (.28)
5 (.20)
10
50.2-HF-16-M3
16 (.63)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
+.2/-.1 (+.008/-.004)
7 (.28)
5 (.20)
18
50.2-HF-20-M3
20 (.79)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
6 (.24)
+.2/-.1 (+.008/-.004)
7 (.28)
5 (.20)
30
50.2-HF-25-M4
25 (.98)
±.1 (±.004)
M4 x .7
8 (.31)
±.1 (±.004)
7 (.28)
+.3/-.1 (+.012/-.004)
8 (.31)
7 (.28)
40
50.2-HF-32-M4
32 (1.26)
±.1 (±.004)
M4 x .7
8 (.31)
±.1 (±.004)
7 (.28)
+.3/-.1 (+.012/-.004)
8 (.31)
7 (.28)
80
50.2-HF-40-M5
40 (1.57)
+.2/-.1 (+.008/-.004)
M5 x .8
10 (.39)
±.1 (±.004)
8 (.31)
+.4/-.1 (+.016/-.004)
10 (.39)
9 (.35)
125
50.2-HF-50-M6
50 (1.97)
+.2/-.1 (+.008/-.004)
M6 x 1.0
12 (.47)
±.1 (±.004)
10 (.39)
+.5/-.1 (+.020/-.004)
12 (.47)
11 (.43)
220
50.2-HF-63-M8
63 (2.48)
+.3/-.1 (+.012/-.004)
M8 x 1.25
15 (.61)
±.1 (±.004)
14 (.55)
+.5/-.1 (+.020/-.004)
16 (.63)
14 (.55)
350
80 (3.15)
+.5/-.1 (+.020/-.004)
M10 x 1.5
20 (.79)
±.1 (±.004)
18 (.71)
+.5/-.1 (+.020/-.004)
16 (.63)
15 (.59)
600
50.2-HF-100-M12
100 (3.94)
+.5/-.1 (+.020/-.004)
M12 x 1.75
22 (.87)
±.1 (±.004)
22 (.87)
+.5/-.1 (+.020/-.004)
21 (.83)
18 (.71)
900
50.2-HF-125-M14
125 (4.92)
+.5/-.1 (+.020/-.004)
M14 x 2.0
25 (.98)
±.1 (±.004)
26 (1.02)
+.5/-.1 (+.020/-.004)
24 (.91)
20 (.79)
1300
50.2-HF-80-M10
J. W. Winco Retaining Magnet Assemblies
5
GN 50.2 | Retaining Magnet Assemblies _ 'LVF 6KDSHG š :LWK 7KUHDGHG %XVKLQJ š 6WHHO š 0HWULF 6L]H
SC Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2 thread
d3
d3 tolerance
h Thickness
h tolerance
l
t min.
Nominal Pulling Forces [N]
50.2-SC-6-M3
6 (.24)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
5
50.2-SC-8-M3
8 (.31)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
11
50.2-SC-10-M3
10 (.39)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
20
50.2-SC-13-M3
13 (.51)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
40
50.2-SC-16-M3
16 (.63)
±.1 (±.004)
M4 x .7
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
60
50.2-SC-20-M3
20 (.79)
±.1 (±.004)
M4 x .7
8 (.31)
±.2 (±.008)
6 (.24)
±.1 (±.004)
7 (.28)
7 (.28)
90
50.2-SC-25-M4
25 (.98)
±.1 (±.004)
M4 x .7
8 (.31)
±.2 (±.008)
7 (.28)
±.2 (±.008)
7 (.28)
7 (.28)
150
50.2-SC-32-M4
32 (1.26)
±.1 (±.004)
M5 x .8
10 (.39)
±.2 (±.008)
7 (.28)
±.2 (±.008)
8.5 (.33)
8 (.31)
220
ND Type
6
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2 thread
d3
d3 tolerance
h Thickness
h tolerance
l
t min.
Nominal Pulling Forces [N]
50.2-ND-6-M3
6 (.24)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
5
50.2-ND-8-M3
8 (.31)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
13
50.2-ND-10-M3
10 (.39)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
25
50.2-ND-13-M3
13 (.51)
±.1 (±.004)
M3 x .5
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
60
50.2-ND-16-M3
16 (.63)
±.1 (±.004)
M4 x .7
6 (.24)
±.1 (±.004)
4.5 (.18)
±.1 (±.004)
7 (.28)
6 (.24)
95
50.2-ND-20-M3
20 (.79)
±.1 (±.004)
M4 x .7
8 (.31)
±.2 (±.008)
6 (.24)
±.1 (±.004)
7 (.28)
7 (.28)
140
50.2-ND-25-M4
25 (.98)
±.1 (±.004)
M4 x .7
8 (.31)
±.2 (±.008)
7 (.28)
±.2 (±.008)
7 (.28)
7 (.28)
200
50.2-ND-32-M4
32 (1.26)
±.1 (±.004)
M5 x .8
10 (.39)
±.2 (±.008)
7 (.28)
±.2 (±.008)
8.5 (.33)
8 (.31)
350
J. W. Winco Retaining Magnet Assemblies
GN 50.25 | Retaining Magnet Assemblies :LWK 7KUHDGHG %XVKLQJ š 6WDLQOHVV 6WHHO š 0HWULF 6L]H
Housing and threaded bushing Stainless steel
GN 50.25 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type)
Due to the lower magnetic conductivity of the stainless steel housing, the magnetic forces are lower than with steel.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Temperature resistant to 390°F (200°C).
HF Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2 thread
d3
h Thickness
h tolerance
l Length
t min.
Nominal Pulling Forces [N]
50.25-HF-25-M5
25 (.98)
±.1 (±.004)
M5 x .8
8 (.31)
7 (.28)
+.3/-.1 (+.012/-.004)
9 (.35)
9 (.35)
32
50.25-HF-32-M5
32 (1.26)
±.1 (±.004)
M5 x .8
8 (.31)
7 (.28)
+.3/-.1 (+.012/-.004)
9 (.35)
9 (.35)
64
50.25-HF-40-M5
40 (1.57)
+.2/-.1 (+.008/-.004)
M5 x .8
8 (.31)
8 (.31)
+.3/-.1 (+.012/-.004)
8.5 (.33)
9 (.35)
100
50.25-HF-50-M5
50 (1.97)
+.2/-.1 (+.008/-.004)
M5 x .8
8 (.31)
10 (.39)
+.4/-.1 (+.016/-.004)
8.5 (.33)
9 (.35)
175
50.25-HF-63-M5
63 (2.48)
+.3/-.1 (+.012/-.004)
M5 x .8
8 (.31)
14 (.55)
+.5/-.1 (+.020/-.004)
8 (.31)
9 (.35)
280
J. W. Winco Retaining Magnet Assemblies
7
GN 50.4 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUX +ROH š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 50.4 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type)
To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type HF temperature resistant to 390°F (200°C),
HF Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2
d3
d4
d5
h Thickness
h tolerance
t
Nominal Pulling Forces [N]
50.4-HF-16
16 (.63)
±.1 (±.004)
3.5 (.14)
–
7.5 (.30)
–
4.5 (.18)
+.2/-.1 (+.008/-.004)
–
14
50.4-HF-20
20 (.79)
±.1 (±.004)
4.1 (.16)
–
10.5 (.41)
–
6 (.24)
+.2/-.1 (+.008/-.004)
–
27
50.4-HF-25
25 (.98)
±.1 (±.004)
5.5 (.22)
–
12 (.47)
–
7 (.28)
+.3/-.1 (+.012/-.004)
–
36
50.4-HF-32
32 (1.26)
±.1 (±.004)
5.5 (.22)
–
12 (.47)
–
7 (.28)
+.3/-.1 (+.012/-.004)
–
72
50.4-HF-40
40 (1.57)
+.2/-.1 (+.008/-.004)
5.5 (.22)
–
13.5 (.53)
–
8 (.31)
+.4/-.1 (+.016/-.004)
–
90
50.4-HF-50
50 (1.97)
+.2/-.1 (+.008/-.004)
–
8.5 (.33)
–
22 (.87)
10 (.39)
+.5/-.1 (+.020/-.004)
8.5 (.33)
180
50.4-HF-63
63 (2.48)
+.3/-.1 (+.012/-.004)
–
8.5 (.33)
–
24 (.94)
14 (.55)
+.5/-.1 (+.020/-.004)
12 (.47)
290
50.4-HF-80
80 (3.15)
+.5/-.1 (+.020/-.004)
–
8.5 (.33)
–
11.5 (.45)
18 (.71)
+.5/-.1 (+.020/-.004)
15 (.59)
540
50.4-HF-100
100 (3.94)
+.5/-.1 (+.020/-.004)
–
10.5 (.41)
–
34 (1.34)
22 (.87)
+.5/-.1 (+.020/-.004)
18 (.71)
680
8
J. W. Winco Retaining Magnet Assemblies
GN 50.45 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUX +ROH š 6WDLQOHVV 6WHHO š 0HWULF 6L]H
Housing Stainless steel
GN 50.45 magnets are a shielded magnetic assembly.
Magnet Hard ferrite SrFe (HF type)
Due to the lower magnetic conductivity of the stainless steel housing, the magnetic forces are lower than with steel.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. Type HF temperature resistant to 390°F (200°C),
HF Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tolerance
d2
d3
d4
d5
h Thickness
h tolerance
t
Nominal Pulling Forces [N]
50.45-HF-20
20 (.79)
±.1 (±.004)
4.1 (.16)
–
10 (.39)
–
6 (.24)
+.2/-.1 (+.008/-.004)
–
22
50.45-HF-25
25 (.98)
±.1 (±.004)
5.5 (.22)
–
11.5 (.45)
–
7 (.28)
+.3/-.1 (+.012/-.004)
–
29
50.45-HF-32
32 (1.26)
±.1 (±.004)
5.5 (.22)
–
11.5 (.45)
–
7 (.28)
+.3/-.1 (+.012/-.004)
–
58
50.45-HF-40
40 (1.57)
+.2/-.1 (+.008/-.004)
5.5 (.22)
–
11.5 (.45)
–
8 (.31)
+.4/-.1 (+.016/-.004)
–
72
50.45-HF-50
50 (1.97)
+.2/-.1 (+.008/-.004)
–
8.5 (.33)
–
22 (.87)
10 (.39)
+.5/-.1 (+.020/-.004)
8.5 (.33)
145
50.45-HF-63
63 (2.48)
+.3/-.1 (+.012/-.004)
–
8.5 (.33)
–
24 (.94)
14 (.55)
+.5/-.1 (+.020/-.004)
12 (.47)
230
J. W. Winco Retaining Magnet Assemblies
9
GN 58 | Pot Magnet Assemblies :LWK 7KUX +ROH š 6WHHO š 0HWULF 6L]H
Housing Steel
GN 58 magnets are a shielded magnetic assembly.
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type)
To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material.
Red lacquered finish
For easier handling and/or to avoid demagnetization, these magnets have an iron plate on their magnetic surface.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type AN temperature resistant to 535°F (280°C), Red lacquer temperature resistant to 355°F (180°C).
AN Type
10
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d2 Bore
d3 Dia.
h Thickness
Nominal Pulling Forces [N]
58-AN-19
19 (.75)
3.7 (.15)
7.5 (.30)
7.5 (.30)
30
58-AN-29
29 (1.14)
4.7 (.19)
10 (.39)
8.5 (.33)
50
58-AN-38
38 (1.50)
4.7 (.19)
11 (.43)
10.5 (.41)
130
J. W. Winco Retaining Magnet Assemblies
GN 51.2 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUHDGHG %XVKLQJ DQG 5XEEHU -DFNHW š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 51.2 magnets are a shielded magnetic assembly with rubber jacket.
Magnet Neodymium, iron and boron version NdFeB (ND type)
They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force.
Rubber jacket Elastomer (TPE), 73 shore, black
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type ND temperature resistant to 175°F (80°C).
ND Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d2 thread
d3 Dia.
h Thickness
l Length
t min.
Nominal Pulling Forces [N]
51.2-ND-12
12 (.47)
M4 x .7
8 (.31)
7 (.28)
8 (.31)
6 (.24)
10
51.2-ND-22
22 (.87)
M4 x .7
8 (.31)
6 (.24)
5.5 (.22)
5 (.20)
50
51.2-ND-31
31 (1.22)
M4 x .7
8 (.31)
6 (.24)
5.5 (.22)
5 (.20)
75
51.2-ND-43
43 (1.69)
M4 x .7
8 (.31)
6 (.24)
4.5 (.18)
5 (.20)
85
51.2-ND-66
66 (2.60)
M5 x .8
10 (.39)
8.5 (.33)
6.5 (.26)
8 (.31)
180
51.2-ND-88
88 (3.46)
M8 x 1.25
12 (.47)
8.5 (.33)
8.5 (.33)
11 (.43)
420
J. W. Winco Retaining Magnet Assemblies
11
GN 51.5 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK ,QWHUQDO 7KUHDG DQG 5XEEHU -DFNHW š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 51.5 magnets are a shielded magnetic assembly with rubber jacket.
Magnet Neodymium, iron and boron version NdFeB (ND type)
They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force.
Rubber jacket Elastomer (TPE), 73 shore, black
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type ND temperature resistant to 175°F (80°C).
ND Type
12
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d2 thread
h Thickness
t1
t2
Nominal Pulling Forces [N]
51.5-ND-22
22 (.87)
M4 x .7
6 (.24)
4.5 (.18)
.8 (.03)
35
51.5-ND-31
31 (1.22)
M5 x .8
6 (.24)
4.5 (.18)
.8 (.03)
75
51.5-ND-43
43 (1.69)
M4 x .7
5.5 (.22)
4 (.16)
.8 (.03)
85
51.5-ND-66
66 (2.60)
M6 x 1.0
8.5 (.33)
6 (.24)
1.8 (.07)
180
51.5-ND-88
88 (3.46)
M6 x 1.0
8.5 (.33)
6 (.24)
1.8 (.07)
420
J. W. Winco Retaining Magnet Assemblies
GN 51.3 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUHDGHG 6WXG DQG 5XEEHU -DFNHW š 6WHHO š 0HWULF 6L]H
Housing and stud Steel, zinc plated
GN 51.3 magnets are a shielded magnetic assembly with rubber jacket.
Magnet Neodymium, iron and boron version NdFeB (ND type)
They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force.
Rubber jacket Elastomer (TPE), 73 shore, black
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type ND temperature resistant to 175°F (80°C).
ND Type
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d2 thread
h Thickness
l Length
Nominal Pulling Forces [N]
51.3-ND-22
22 (.87)
M4 x .7
6 (.24)
6.5 (.26)
50
51.3-ND-43
43 (1.69)
M6 x 1.0
6 (.24)
16 (.59)
85
51.3-ND-66
66 (2.60)
M6 x 1.0
8.5 (.33)
16 (.59)
180
51.3-ND-88
88 (3.46)
M8 x 1.25
8.5 (.33)
16 (.59)
420
J. W. Winco Retaining Magnet Assemblies
13
GN 51.4 | Retaining Magnet Assemblies 'LVF 6KDSHG š :LWK 7KUX +ROH DQG 5XEEHU -DFNHW š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 51.4 magnets are a shielded magnetic assembly with rubber jacket.
Magnet Neodymium, iron and boron version NdFeB (ND type)
They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force.
Rubber jacket Elastomer (TPE), 73 shore, black
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type ND temperature resistant to 175°F (80°C).
ND Type
14
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d2
d3
h Thickness
t1
Nominal Pulling Forces [N]
51.4-ND-22
22 (.87)
4 (.16)
8 (.31)
6 (.24)
3.5 (.14)
35
51.4-ND-31
31 (1.22)
6 (.24)
9 (.35)
6 (.24)
3.5 (.14)
75
51.4-ND-57
57 (2.24)
8 (.31)
25.3 (1.00)
7.5 (.30)
3.5 (.14)
175
51.4-ND-66
66 (2.60)
5.5 (.22)
25 (.98)
8.5 (.33)
3.5 (.14)
210
J. W. Winco Retaining Magnet Assemblies
GN 52.1 | Retaining Magnet Assemblies 5RG 6KDSHG š :LWK 6PRRWK )LQLVK š 6WHHO š 0HWULF 6L]H
Housing Type 1 – Steel, zinc plated Type 2 – Steel, plain finish
GN 52.1 magnets are a shielded magnetic assembly.
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type), or neodymium, iron and boron version NdFeB (ND type)
Mounting options include pressing in, shrinking in, or gluing in.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type AN temperature resistant to 535°F (280°C), Type ND temperature resistant to 175°F (80°C).
Note: AN type has brass lining between housing and magnet; ND type has plastic lining between housing and magnet
AN Type
Dimensions in: millimeters (inches) Type 1 – Zinc Plated Steel
Type 2 – Plain Steel
Nominal Pulling Forces [N]
Part Number
d Dia.
d tol.
h
h tol.
k*
Part Number
d Dia.
d tol.
h
h tol.
k*
52.1-AN-6-1
6 (.24)
±.2 (±.008)
20 (.79)
±.2 (±.008)
12 (.47)
52.1-AN-6-2
6 (.24)
h6
10 (.39)
±.2 (±.008)
2 (.08)
2
52.1-AN-8-1
8 (.31)
±.2 (±.008)
20 (.79)
±.2 (±.008)
11 (.43)
52.1-AN-8-2
8 (.31)
h6
12 (.47)
±.2 (±.008)
3 (.12)
4
52.1-AN-10-1
10 (.39)
±.2 (±.008)
20 (.79)
±.2 (±.008)
10 (.39)
52.1-AN-10-2
10 (.39)
h6
16 (.63)
±.2 (±.008)
6 (.24)
8.5
52.1-AN-13-1
13 (.51)
±.2 (±.008)
20 (.79)
±.2 (±.008)
8 (.31)
52.1-AN-13-2
13 (.51)
h6
18 (.71)
±.2 (±.008)
6 (.24)
12
52.1-AN-16-1
16 (.63)
±.2 (±.008)
20 (.79)
±.2 (±.008)
6 (.24)
52.1-AN-16-2
16 (.63)
h6
20 (.79)
±.2 (±.008)
6 (.24)
20
52.1-AN-20-1
20 (.79)
±.2 (±.008)
25 (.98)
±.2 (±.008)
5 (.20)
52.1-AN-20-2
20 (.79)
h6
25 (.98)
±.2 (±.008)
5 (.20)
40
52.1-AN-25-1
25 (.98)
±.2 (±.008)
35 (1.38)
±.2 (±.008)
13 (.51)
52.1-AN-25-2
25 (.98)
h6
30 (1.18)
±.2 (±.008)
7 (.28)
60
52.1-AN-32-1
32 (1.26)
±.2 (±.008)
40 (1.57)
±.2 (±.008)
9 (.35)
52.1-AN-32-2
32 (1.26)
h6
35 (1.38)
±.2 (±.008)
4 (.16)
160
52.1-AN-40-1
40 (1.57)
±.2 (±.008)
50 (1.97)
±.2 (±.008)
10 (.39)
52.1-AN-40-2
40 (1.57)
h6
45 (1.77)
±.2 (±.008)
5 (.20)
240
52.1-AN-50-1
50 (1.97)
±.2 (±.008)
60 (2.36)
±.2 (±.008)
10 (.39)
52.1-AN-50-2
50 (1.97)
h6
50 (1.97)
±.2 (±.008)
–
400
52.1-AN-63-1
63 (2.48)
±.2 (±.008)
65 (2.56)
±.2 (±.008)
10 (.39)
52.1-AN-63-2
63 (2.48)
h6
60 (2.36)
±.2 (±.008)
5 (.20)
660
*k is the maximum dimension by which the retaining magnet can be shortened without losing its properties.
J. W. Winco Retaining Magnet Assemblies
15
GN 52.1 | Retaining Magnet Assemblies _ 5RG 6KDSHG š :LWK 6PRRWK )LQLVK š 6WHHO š 0HWULF 6L]H
ND Type
Dimensions in: millimeters (inches) Type 1 - Zinc Plated Steel
Type 2 – Plain Steel
Nominal Pulling Forces [N]
Part Number
d Dia.
d tol.
h
h tol.
k*
Part Number
d Dia.
d tol.
h
h tol.
k*
52.1-ND-4-1
4 (.16)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
–
–
–
–
–
–
2.5
52.1-ND-5-1
5 (.20)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
–
–
–
–
–
–
4.5
52.1-ND-6-1
6 (.24)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
52.1-ND-6-2
6 (.24)
h6
10 (.39)
±.2 (±.008)
5 (.20)
6
52.1-ND-8-1
8 (.31)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
52.1-ND-8-2
8 (.31)
h6
12 (.47)
±.2 (±.008)
7 (.28)
12
52.1-ND-10-1
10 (.39)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
52.1-ND-10-2
10 (.39)
h6
16 (.63)
±.2 (±.008)
11 (.43)
24
52.1-ND-13-1
13 (.51)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
52.1-ND-13-2
13 (.51)
h6
18 (.71)
±.2 (±.008)
13 (.51)
60
52.1-ND-16-1
16 (.63)
±.2 (±.008)
20 (.79)
±.2 (±.008)
15 (.59)
52.1-ND-16-2
16 (.63)
h6
20 (.79)
±.2 (±.008)
15 (.59)
90
52.1-ND-20-1
20 (.79)
±.2 (±.008)
25 (.98)
±.2 (±.008)
18 (.71)
52.1-ND-20-2
20 (.79)
h6
25 (.98)
±.2 (±.008)
18 (.71)
135
52.1-ND-25-1
25 (.98)
±.2 (±.008)
35 (1.38)
±.2 (±.008)
27 (1.06)
52.1-ND-25-2
25 (.98)
h6
30 (1.18)
±.2 (±.008)
22 (.87)
190
52.1-ND-32-1
32 (1.26)
±.2 (±.008)
40 (1.57)
±.2 (±.008)
32 (1.26)
52.1-ND-32-2
32 (1.26)
h6
35 (1.38)
±.2 (±.008)
27 (1.06)
340
*k is the maximum dimension by which the retaining magnet can be shortened without losing its properties.
16
J. W. Winco Retaining Magnet Assemblies
GN 54.1 | Retaining Magnet Assemblies 5RG 6KDSHG š :LWK 6PRRWK )LQLVK š %UDVV š 0HWULF 6L]H
Housing Brass
GN 54.1 magnets are a shielded magnetic assembly.
Type SC temperature resistant to 390°F (200°C), Type ND temperature resistant to 175°F (80°C).
Magnet Samarium and cobalt combination AlNiCo (SC type), or neodymium, iron and boron version NdFeB (ND type)
The configuration of magnetic and iron poles is known as a sandwich magnet assembly. These retaining magnets provide superior holding power and work well with smaller workpieces.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Mounting options include pressing in or gluing in.
SC Type
Dimensions in: inches (millimeters)
Part Number
d Dia.
h
h tol.
k1*
k2**
Nominal Pulling Forces [N]
54.1-SC-6
6 (.24)
20 (.79)
±.2 (±.008)
10 (.39)
1.5 (.06)
8
54.1-SC-8
8 (.31)
20 (.79)
±.2 (±.008)
10 (.39)
1.5 (.06)
42
54.1-SC-10
10 (.39)
20 (.79)
±.2 (±.008)
8 (.31)
2 (.08)
40
54.1-SC-13
13 (.51)
20 (.79)
±.2 (±.008)
6 (.24)
2.5 (.10)
60
54.1-SC-16
16 (.63)
20 (.79)
±.2 (±.008)
2 (.08)
3 (.12)
125
54.1-SC-20
20 (.79)
25 (.98)
±.2 (±.008)
5 (.20)
4 (.16)
250
54.1-SC-25
25 (.98)
35 (1.38)
±.3 (±.012)
7 (.28)
5 (.20)
400
54.1-SC-32
32 (1.26)
40 (1.57)
±.3 (±.012)
4.5 (.22)
6 (.24)
600
*k is the maximum dimension by which the retaining magnet can be shortened without losing its properties. **Mounting these retaining magnets directly in steel components will create a magnetic short-circuit which reduces the magnetic power by as much as 15%. To avoid this effect, the k2 distance between the brass housing and the steel component should be observed. These distances should also be maintained if the retaining magnet is shortened. J. W. Winco Retaining Magnet Assemblies
17
GN 54.1 | Retaining Magnet Assemblies _ 5RG 6KDSHG š :LWK 6PRRWK )LQLVK š %UDVV š 0HWULF 6L]H
ND Type
Dimensions in: millimeters (inches)
Part Number
d Dia.
h
h tol.
k1*
k2**
Nominal Pulling Forces [N]
54.1-ND-6
6 (.24)
20 (.79)
±.2 (±.008)
10 (.39)
1.5 (.06)
10
54.1-ND-8
8 (.31)
20 (.79)
±.2 (±.008)
10 (.39)
1.5 (.06)
22
54.1-ND-10
10 (.39)
20 (.79)
±.2 (±.008)
8 (.31)
2 (.08)
45
54.1-ND-13
13 (.51)
20 (.79)
±.2 (±.008)
6 (.24)
2.5 (.10)
70
54.1-ND-16
16 (.63)
20 (.79)
±.2 (±.008)
2 (.08)
3 (.12)
150
54.1-ND-20
20 (.79)
25 (.98)
±.2 (±.008)
5 (.20)
4 (.16)
280
54.1-ND-25
25 (.98)
35 (1.38)
±.3 (±.012)
7 (.28)
5 (.20)
450
54.1-ND-32
32 (1.26)
40 (1.57)
±.3 (±.012)
4.5 (.22)
6 (.24)
700
*k is the maximum dimension by which the retaining magnet can be shortened without losing its properties. **Mounting these retaining magnets directly in steel components will create a magnetic short-circuit which reduces the magnetic power by as much as 15%. To avoid this effect, the k2 distance between the brass housing and the steel component should be observed. These distances should also be maintained if the retaining magnet is shortened.
18
J. W. Winco Retaining Magnet Assemblies
GN 52.2 | Retaining Magnet Assemblies 5RG 6KDSHG š :LWK ,QWHUQDO 7KUHDG š 6WHHO š 0HWULF 6L]H
Housing Steel, zinc plated
GN 52.2 magnets are a shielded magnetic assembly.
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type), or neodymium, iron and boron version NdFeB (ND type)
Mounting options include pressing in, shrinking in, or gluing in.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type AN temperature resistant to 535°F (280°C), Type ND temperature resistant to 175°F (80°C).
AN Type
Dimensions in: inches (millimeters)
Part Number
d1 Dia.
d1 tol.
d2 Thread
h
h tol.
t min.
Nominal Pulling Forces [N]
52.2-AN-6
6 (.24)
±.2 (±.008)
M3 x .5
20 (.79)
±.2 (±.008)
5 (.20)
2
52.2-AN-8
8 (.31)
±.2 (±.008)
M3 x .5
20 (.79)
±.2 (±.008)
5 (.20)
4
52.2-AN-10
10 (.39)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
8.5
52.2-AN-13
13 (.51)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
12
52.2-AN-16
16 (.63)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
20
52.2-AN-20
20 (.79)
±.2 (±.008)
M6 x 1.0
25 (.98)
±.2 (±.008)
7 (.28)
40
52.2-AN-25
25 (.98)
±.2 (±.008)
M6 x 1.0
35 (1.38)
±.2 (±.008)
9 (.35)
60
52.2-AN-32
32 (1.26)
±.2 (±.008)
M8 x 1.25
40 (1.57)
±.2 (±.008)
9 (.35)
160
52.2-AN-40
40 (1.57)
±.2 (±.008)
M8 x 1.25
50 (1.97)
±.2 (±.008)
9 (.35)
240
52.2-AN-50
50 (1.97)
±.2 (±.008)
M10 x 1.5
60 (2.36)
±.2 (±.008)
12 (.47)
400
52.2-AN-63
63 (2.48)
±.2 (±.008)
M12 x 1.75
65 (2.56)
±.2 (±.008)
14 (.55)
660
J. W. Winco Retaining Magnet Assemblies
19
GN 52.2 | Retaining Magnet Assemblies _ 5RG 6KDSHG š :LWK ,QWHUQDO 7KUHDG š 6WHHO š 0HWULF 6L]H
ND Type
20
Dimensions in: millimeters (inches)
Part Number
d1 Dia.
d1 tol.
d2 Thread
h
h tol.
t min.
Nominal Pulling Forces [N]
52.2-ND-6
6 (.24)
±.2 (±.008)
M3 x .5
20 (.79)
±.2 (±.008)
5 (.20)
6
52.2-ND-8
8 (.31)
±.2 (±.008)
M3 x .5
20 (.79)
±.2 (±.008)
5 (.20)
12
52.2-ND-10
10 (.39)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
24
52.2-ND-13
13 (.51)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
60
52.2-ND-16
16 (.63)
±.2 (±.008)
M4 x .7
20 (.79)
±.2 (±.008)
7 (.28)
90
52.2-ND-20
20 (.79)
±.2 (±.008)
M6 x 1.0
25 (.98)
±.2 (±.008)
7 (.28)
135
52.2-ND-25
25 (.98)
±.2 (±.008)
M6 x 1.0
35 (1.38)
±.2 (±.008)
9 (.35)
190
52.2-ND-32
32 (1.26)
±.2 (±.008)
M8 x 1.25
40 (1.57)
±.2 (±.008)
9 (.35)
340
52.2-ND-40
40 (1.57)
±.2 (±.008)
M8 x 1.25
50 (1.97)
±.2 (±.008)
9 (.35)
600
52.2-ND-50
50 (1.97)
±.2 (±.008)
M10 x 1.5
60 (2.36)
±.2 (±.008)
12 (.47)
900
52.2-ND-63
63 (2.48)
±.2 (±.008)
M12 x 1.75
65 (2.56)
±.2 (±.008)
14 (.55)
1300
J. W. Winco Retaining Magnet Assemblies
GN 52.3 | Sandwich Magnet Assemblies 5RG 6KDSHG š :LWK ,QWHUQDO 7KUHDG š 6WHHO š 0HWULF 6L]H
Housing Steel, red lacquered finish
GN 52.3 magnets are a shielded magnetic assembly.
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type)
For easier handling and/or to avoid demagnetization, these magnets have an iron plate on their magnetic surface.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Type AN magnet temperature resistant to 535°F (280°C), Red lacquered finish temperature resistant to 355°F (180°C).
AN Type
Dimensions in: inches (millimeters)
Part Number
d1 Dia.
d2 Thread
h
t min.
Nominal Pulling Forces [N]
52.3-AN-12.5
12.5 (.49)
M4 x .7
16 (.43)
7 (.28)
20
52.3-AN-17
17 (.67)
M6 x 1.0
16 (.43)
5 (.20)
26
52.2-AN-21
21 (.83)
M6 x 1.0
19 (.75)
7 (.28)
40
52.2-AN-27
27 (1.06)
M6 x 1.0
25 (.98)
9 (.35)
65
52.2-AN-35
35 (1.38)
M6 x 1.0
30 (1.18)
9 (.35)
150
J. W. Winco Retaining Magnet Assemblies
21
GN 52.4 | Retaining Magnet Assemblies 5RG 6KDSHG š :LWK 6WXG š 6WHHO š 0HWULF 6L]H
Housing and stud Steel, zinc plated
GN 52.4 magnets are a shielded magnetic assembly.
Type AN temperature resistant to 535°F (280°C), Type ND temperature resistant to 175°F (80°C).
Type D – Unthreaded stud Type E – Threaded stud
Type D with smooth stud is designed for sheet metal applications where the stud can be punched or riveted, to hold the magnet assembly in place.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type), or neodymium, iron and boron version NdFeB (ND type)
The ND version sizes market with an asterisk are available upon request with a minimum quantity order.
AN Type
Dimensions in: inches (millimeters) Type D – Unthreaded Stud
Type E – Threaded Stud
Part Number
d1 Dia.
52.4-AN-6-3-D
6 (.24)
3 (.12)
20 (.79)
8 (.31)
52.4-AN-6-M3-E
6 (.24)
M3 x .5
10 (.39)
20 (.79)
7 (.28)
2
52.4-AN-8-3-D
8 (.31)
3 (.12)
20 (.79)
8 (.31)
52.4-AN-8-M3-E
8 (.31)
M3 x .5
12 (.47)
20 (.79)
7 (.28)
4
52.4-AN-10-4-D
10 (.39)
4 (.16)
20 (.79)
8 (.31)
52.4-AN-10-M4-E
10 (.39)
M4 x .7
16 (.63)
20 (.79)
8 (.31)
8.5
52.4-AN-13-4-D
13 (.51)
4 (.16)
20 (.79)
8 (.31)
52.4-AN-13-M4-E
13 (.51)
M4 x .7
18 (.71)
20 (.79)
8 (.31)
12
52.4-AN-16-5-D
16 (.63)
5 (.20)
20 (.79)
8 (.31)
52.4-AN-16-M4-E
16 (.63)
M4 x .7
20 (.79)
20 (.79)
10 (.39)
20
52.4-AN-20-6-D
20 (.79)
6 (.24)
25 (.98)
8 (.31)
52.4-AN-20-M6-E
20 (.79)
M6 x 1.0
25 (.98)
25 (.98)
12 (.47)
40
52.4-AN-25-8-D
25 (.98)
8 (.31)
35 (1.38)
10 (.39)
52.4-AN-25-M6-E
25 (.98)
M6 x 1.0
30 (1.18)
35 (1.38)
10 (.39)
60
52.4-AN-32-10-D
32 (1.26)
10 (.39)
40 (1.57)
10 (.39)
52.4-AN-32-M8-E
32 (1.26)
M8 x 1.25
35 (1.38)
40 (1.57)
15 (.59)
160
52.4-AN-40-15-D
40 (1.57)
15 (.59)
50 (1.97)
15 (.59)
52.4-AN-40-M8-E
40 (1.57)
M8 x 1.25
45 (1.77)
50 (1.97)
15 (.59)
240
52.4-AN-50-18-D
50 (1.97)
18 (.71)
60 (2.36)
18 (.71)
52.4-AN-50-M10-E
50 (1.97)
M10 x 1.5
50 (1.97)
60 (2.36)
15 (.59)
400
52.4-AN-63-20-D
63 (2.48)
20 (.79)
65 (2.56)
20 (.79)
52.4-AN-63-M12-E
63 (2.48)
M12 x 1.75
60 (2.36)
65 (2.56)
20 (.79)
660
22
h tol. ±.2mm
l length
Part Number
d Dia.
d3 Thread
h
h tol. ±.2mm
l length
Nominal Pulling Forces [N]
d2 Dia.tol. ±.2mm
J. W. Winco Retaining Magnet Assemblies
GN 52.4 | Retaining Magnet Assemblies _ 5RG 6KDSHG š :LWK 6WXG š 6WHHO š 0HWULF 6L]H
ND Type
Dimensions in: inches (millimeters) Type D – Unthreaded Stud
Type E – Threaded Stud
Part Number
d1 Dia.
52.4-ND-6-3-D
6 (.24)
3 (.12)
20 (.79)
8 (.31)
52.4-ND-6-M3-E
6 (.24)
M3 x .5
10 (.39)
20 (.79)
7 (.28)
6
52.4-ND-8-3-D
8 (.31)
3 (.12)
20 (.79)
8 (.31)
52.4-ND-8-M3-E
8 (.31)
M3 x .5
12 (.47)
20 (.79)
7 (.28)
12
52.4-ND-10-4-D
10 (.39)
4 (.16)
20 (.79)
8 (.31)
52.4-ND-10-M4-E
10 (.39)
M4 x .7
16 (.63)
20 (.79)
8 (.31)
24
52.4-ND-13-4-D
13 (.51)
4 (.16)
20 (.79)
8 (.31)
52.4-ND-13-M4-E
13 (.51)
M4 x .7
18 (.71)
20 (.79)
8 (.31)
60
52.4-ND-16-5-D
16 (.63)
5 (.20)
20 (.79)
8 (.31)
52.4-ND-16-M4-E
16 (.63)
M4 x .7
20 (.79)
20 (.79)
10 (.39)
90
52.4-ND-20-6-D
20 (.79)
6 (.24)
25 (.98)
8 (.31)
52.4-ND-20-M6-E
20 (.79)
M6 x 1.0
25 (.98)
25 (.98)
12 (.47)
135
52.4-ND-25-8-D
25 (.98)
8 (.31)
35 (1.38)
10 (.39)
52.4-ND-25-M6-E
25 (.98)
M6 x 1.0
30 (1.18)
35 (1.38)
10 (.39)
190
52.4-ND-32-10-D
32 (1.26)
10 (.39)
40 (1.57)
10 (.39)
52.4-ND-32-M8-E
32 (1.26)
M8 x 1.25
35 (1.38)
40 (1.57)
15 (.59)
340
52.4-ND-40-15-D*
40 (1.57)
15 (.59)
50 (1.97)
15 (.59)
52.4-ND-40-M8-E*
40 (1.57)
M8 x 1.25
45 (1.77)
50 (1.97)
15 (.59)
600
52.4-ND-50-18-D*
50 (1.97)
18 (.71)
60 (2.36)
18 (.71)
52.4-ND-50-M10-E*
50 (1.97)
M10 x 1.5
50 (1.97)
60 (2.36)
15 (.59)
900
52.4-ND-63-20-D*
63 (2.48)
20 (.79)
65 (2.56)
20 (.79)
52.4-ND-63-M12-E*
63 (2.48)
M12 x 1.75
60 (2.36)
65 (2.56)
20 (.79)
1300
J. W. Winco Retaining Magnet Assemblies
h tol. ±.2mm
l length
Part Number
d Dia.
d3 Thread
h
H tol. ±.2mm
l length
Nominal Pulling Forces [N]
d2 Dia.tol. ±.2mm
23
GN 60 | Button-Type Magnets :LWK 7KUX +ROH š 0HWULF 6L]H š 6WHHO
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type)
GN 60 magnets have a split magnetic surface. These are non-shielded magnetic systems produced by casting.
Type AN magnet temperature resistant to 535°F (280°C), Red lacquered finish temperature resistant to 355°F (180°C).
Red lacquered finish
To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
For easier handling and/or to avoid demagnetization, these magnets have an iron plate on their magnetic surface.
AN Type
Dimensions in: inches (millimeters)
Part Number
d1 Dia. Nominal Dimension
d1 Actual Nominal Dimension
d2 Bore
d3 Max. Dia. Screw Head
h Thickness
s
t
Nominal Pulling Forces [N]
60-AN-13
13 (.51)
13 (.51)
4.2 (.17)
7 (.28)
10 (.39)
2 (.08)
4.5 (.18)
7
60-AN-19
19 (.75)
19.1 (.75)
4.8 (.19)
8.7 (.34)
12.7 (.50)
5.7 (.22)
6.5 (.26)
19
60-AN-25
25 (.98)
25.4 (1.00)
4.5 (.18)
8.5 (.33)
20 (.79)
5.6 (.22)
8 (.31)
40
60-AN-32
32 (1.26)
31.8 (1.25)
7.1 (.28)
10 (.39)
25.4 (1.00)
7.9 (.31)
12.7 (.50)
66
24
J. W. Winco Retaining Magnet Assemblies
GN 62 | U-Shaped Magnets :LWK 7KUX +ROH š 6WHHO š 0HWULF 6L]H
Type b1 = 57, 70, 79
d
Type b1 = 22, 30, 39, 45
d
b2
b2
d
b1 m
h
h
b1
s
s
Magnetic surfaces
Magnetic surfaces
Magnet Aluminum, nickel and cobalt combination AlNiCo (AN type)
GN 62 magnets have a split magnetic surface. These are non-shielded magnetic systems produced by casting.
Type AN magnet temperature resistant to 535°F (280°C), Red lacquered finish temperature resistant to 355°F (180°C).
Red lacquered finish
To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material.
See also Types of Retaining Magnet Assemblies, page 26, Materials Composition of Retaining Magnet Assemblies, page 27, and Pulling Force Information for Retaining Magnet Assemblies, page 28.
For easier handling and/or to avoid demagnetization, these magnets have an iron plate on their magnetic surface.
AN Type
Dimensions in: inches (millimeters)
Part Number
b1
b2
d Max. Dia. Screw Head
h Thickness
m
s
Nominal Pulling Forces [N]
62-AN-22
22 (.87)
25 (.98)
7 (.28)
17 (.67)
–
8 (.31)
30
62-AN-30
30 (1.18)
20 (.79)
5 (.20)
20 (.79)
–
15 (.59)
45
62-AN-39
39 (1.54)
25.4 (1.00)
4.7 (.19)
25 (.98)
–
19 (.75)
90
62-AN-45
45 (1.77)
30 (1.18)
4.7 (.19)
30 (1.18)
–
23 (.91)
120
62-AN-57
57 (2.24)
44.5 (1.75)
8 (.31)
35 (1.38)
31.5 (1.24)
27.8 (1.09)
180
62-AN-70
70 (2.76)
57 (2.24)
8 (.31)
41 (1.61)
38 (1.50)
35 (1.38)
320
62-AN-79
79 (3.11)
82 (3.23)
9.5 (.37)
54 (2.13)
43 (1.69)
38.5 (1.51)
470
J. W. Winco Retaining Magnet Assemblies
25
Types of Retaining Magnet Assemblies The use of retaining magnet assemblies is a simple solution for no-wear magnetic holding of an object.
Due to their structure, these magnet assemblies have only one magnetic pulling force level. The full magnetic force is focused directly onto the adhesive surface by means of iron magnetic poles. The spatial effect of the magnetic field is limited by shielded systems, so that surrounding objects are not magnetized.
Flat gripper
Ø d = 6 - 125 mm, h = 4,5 - 26 Housing: Steel, zinc plated, red lacquered finish, or stainless steel.
Ø d = 12 - 88, h = 6 - 8.5 mm Housing: Steel, zinc plated, with rubber jacket.
Rod gripper
Ø d = 4 - 63 mm, h = 10 - 65 mm Housing: Steel, zinc plated, red lacquered finish.
Ø d = 6 - 32 mm, h = 20 - 40 mm Sandwich configuration of the steel poles, housing brass.
Button-type/U-Magnets
Ø d = 13 - 32 mm, h1 = 10 - 25.4 mm, b = 22 - 79 mm, h2 = 17 - 54 mm Cast, unshielded system, red lacquered.
26
J. W. Winco Retaining Magnet Assemblies
Materials Composition of Retaining Magnet Assemblies Hard ferrite (HF) SrFe (Strontium ferrite).
SmCo (SC) Samarium cobalt.
Magnets made of hard ferrite (80% iron oxide) are made by sintering process.
Magnets made of SmCo (main constituents include samarium and cobalt) are made by sintering process.
Like all ceramic materials, these magnets are very hard and brittle and virtually nonmachinable.
The material is very hard and brittle and is virtually non-machinable.
The magnetic adhesive force drops when the magnet is heated.
The magnetic adhesive force drops when the magnet is heated.
AlNiCo (AN) Aluminium nickel cobalt.
NdFeB (ND) Neodymium iron boron.
Magnets made of AlNiCo (main constituents include aluminium, nickel, cobalt and iron) are made by sintering or casting process.
Magnets made of NdFeB (main constituents include neodymium, iron and boron) are made by sintering process.
The material is very hard and tough, but can be redressed.
The material is very hard and brittle and is virtually non-machinable.
These magnets are used in applications in which the magnetic field is to remain as static and stable as possible; also under higher temperature fluctuations.
This material delivers ultimate magnetic holding power. The magnetic adhesive force drops when the magnet is heated.
Comparison of Magnet Materials Description
Hard ferrite (HF)
AlNiCo (AN)
SmCo (SC)
NdFeB (ND)
Pulling force
good
medium
strong
very strong
Max. working temperature*
~ 390°F (200°C)
~ 840°F(450°C)
~ 390°F (200°C)
~ 175°F (80°C)
Corrosion resistance
very good
very good
good
less good
Machineability
not possible
diamond cutting, grinding
not possible
not possible
Demagnetisation capability
moderate
easy
very difficult
difficult
by demagnetizing fields
by demagnetizing fields
only by large demagnetizing fields
only by large demagnetizing fields
very reasonable
high
very high
reasonable
Price
* The maximum temperature used is only a guide value, because it also depends on the dimensions of the magnet.
J. W. Winco Retaining Magnet Assemblies
27
Pulling Force Information for Retaining Magnet Assemblies Other factors aside from the magnet material and the size of the magnet affecting the magnetic pulling force are:
The magnetic pulling force can also be impaired by alternating thermal stress and by chemical factors (aggressive baths, gases, etc.).
- an air gap (magnetically non-conductive materials act like an air gap)
The diagrams and graphs below show guide values relating to the impact on the magnetic pulling force caused by different mechanical specifications.
- the quality of the surface (roughness and shape) - the temperature - the content of ferro-magnetic material in the steel; the components must also be sufficiently thick to be able to absorb the entire magnetic flux.
The nominal magnetic pulling forces shown in the tables of the standard pages are minimum values which are achieved at: - room temperature - perpendicular “tear-off” under full surface contact of the magnet - workpieces made of low-carbon steel with a minimum thickness of 10 mm
Influence of the air gap
Influence of the material (steel grade)
100 %
technically pure iron
86%
C60
95%
St37
84%
42CrMo4
95%
C15
75%
St50
94%
34CrNiMo6
93%
St52-3
65%
X210CrW12
92%
90MnV8
50%
20MnCr5
90%
C45
30%
GG
87%
Ck45
0%
~ 72%
X155CrMo12
non-ferrous metals
Hardened workpieces are bad conductors of the magnetic flux. The magnetic pulling force is therefore lower.
Influence of the workpiece surface on the magnetic pulling force
Displacement force = 20 % – 30 % of the magnetic pulling force
The displacement force is also influenced by the surface roughness and the magentic pulling force.
Force Measure 1 Newton (N) = .225 lbs.
28
J. W. Winco Retaining Magnet Assemblies
Terms and conditions Delivery: J.W. Winco, Inc. (“J.W. Winco”) will make every effort to meet or exceed the time frames shown. However, unforeseen circumstances may cause temporary delays. Normal parcel shipments will be received by a reputable commercial freight carrier within 3 business days of shipment date. If Buyer requires a shorter delivery service, a variety of carrier options are available. Under no circumstances will J.W. Winco be responsible for or incur any liability for damages, costs or expenses of any nature (whether general, consequential, as a penalty or as liquidated damages or otherwise) due to any delays in delivery, or failure to make delivery at an agreed or specified time, which result from circumstances beyond J.W. Winco‘s reasonable control. Acceptance by Buyer of the items when received waives any claim for loss or damage resulting from a delay, regardless of the cause of the delay. If Buyer delays or suspends the shipment, Buyer will pay the invoice price for the items as per the payment terms, together with our handling and storage charges in effect. For shipments requiring LTL Collect, we will not be held responsible for items lost or damaged while under the care of carriers. All other export or overseas shipments will be routed per Buyer‘s request and expense. Same day delivery is available, upon request, depending on the time of the day and the destination. There is a $35.00 service charge for same day delivery, in addition to the regular freight charge. Customers wanting to use their collect number for UPS shipping charges are required to provide said collect number in writing on a purchase order. If a customer provides an incorrect number, said customer accepts liability for reimbursement to J.W. Winco, Inc. for UPS‘s $10.00 correction fee and associated shipping charges. In order to prevent any possible fraudulent claims and losses due to misuse, customers‘ UPS collect numbers will not be stored at J.W. Winco, Inc., and therefore will need to be provided in writing by the customer on each occasion of use. Freight terms: For orders $20.00 and over, all parcel shipments to all 50 states in the U.S.A. and Puerto Rico are FOB-destination and are freight prepaid. For orders less than $20, customers will be required to pay shipping costs. All standard UPS shipping to Canada is free. Services requiring a higher level of service than what is standard in your state, for example next day air, in the United States will be billed collect or at actual cost, plus insurance on merchandise over $100.00 in value. All LTL shipments will be billed collect. The risk of loss to the items (including damage or destruction thereto) passes to Buyer upon shipment. Freight terms are subject to change without notice. International orders: International orders are defined as requiring both a “bill to” and “ship to” address outside the United States, excluding Canada, Mexico and Puerto Rico. Minimum purchase order amount is $25.00. Orders under $350.00 will include a $25.00 international processing fee. Prices are quoted in U.S. Dollars, EX-Works Origin New Berlin, Wisconsin and risk of loss passes to Buyer upon delivery to the shipper. Orders may be shipped collect with customer‘s preferred collect account number and customer‘s carrier. Payments must be made in U.S. Dollars in advance. Buyer is responsible for all brokerage fees, taxes and duties. Customer satisfaction guarantee–returns: J.W. Winco‘s goal is to achieve total Buyer satisfaction. As long as standard catalog items are in good condition, Buyer can return the merchandise, within 60 days, freight prepaid, and J.W. Winco will issue full credit for the item not including freight charges. After 60 days all items will be charged a 25% minimum re-stocking fee. All returns must be approved by a J.W. Winco Sales Associate and have a return authorization number issued before the return of said goods. All returns must be returned via UPS-Ground with the return shipping charges prepaid and with reference to the J.W. Winco return authorization number and invoice number. On the return of merchandise from a foreign country, including Mexico and Canada, J.W. Winco will not be responsible for any brokerage fees and duty fees regardless of reason for return. Modified and special
order items cannot be cancelled or returned. The risk of loss to the items (including damage or destruction thereto) remains with Buyer when returning catalog items until J.W. Winco receives the items. Loss, damage or delay J.W. Winco will not be liable for loss, damage or delay resulting from causes beyond its control or caused by strikes or labor difficulties, blackouts, acts or omissions of any governmental authority or buyer, insurrection or riot, war, fires, floods, acts of God, breakdown of essential machinery, accidents, embargoes, cargo or material shortages or inability to obtain labor, materials or parts from usual sources. In the event of any such delay, performance will be postponed by such length of time as may be reasonably necessary to compensate for the delay. In the event performance by J.W. Winco under this Agreement cannot be accomplished by J.W. Winco due to any action of governmental agencies, or any laws, rules or regulations, J.W. Winco may, at its option, cancel this Agreement without liability. Pricing Information: All prices are subject to change without notice. Prices on scheduled shipments will be based upon the quantity purchased for each shipment, unless a blanket order price is agreed upon. Minimum purchase: There is no minimum purchase requirement for U.S. customers. Payment terms: Visa, MasterCard and American Express accepted. For businesses with approved credit ratings -1%/10 net 30 days. All other U.S. businesses – C.O.D. until proper credit has been established. A $20 fee will be charged for checks returned unpaid for insufficient or uncollected funds. Individuals are welcome to order from J.W. Winco; however, payment must be made by Visa, MasterCard, American Express or C.O.D. All past due accounts will be subject to a 1.5% per month service charge or 18% per annum. Foreign Buyers may pay with Visa, MasterCard, American Express, wire transfer of funds, U.S. Cashier‘s Check or Letter of Credit. Any bank fees under a wire transfer are the sole responsibility of the Buyer. Backorders: Items temporarily out of stock may be backordered. The balance of Buyer‘s order will be shipped within 24 hours from the time J.W. Winco has received Buyer‘s backordered parts. Cancellation policy: All standard stocked components can be cancelled at no charge before shipping, provided total order value is less than $5,000.00, if greater than $5,000 there will be a minimum 25% cancellation fee. Before shipping, all blanket orders on standard components are subject to a minimum 25% cancellation charge. Special order items: Special order items of non-stock or modified parts are subject to a +/- 10% quantity shipping variance unless quoted otherwise. All special order items of non-stock or modified parts cannot be cancelled or returned. Specifications: All specifications are subject to change without notice. General: (a) No modification or waiver of these Terms and Conditions is valid unless expressly agreed to by J.W. Winco in writing. No waiver by J.W. Winco of any default under these Terms and Conditions is a waiver of any other or subsequent default. (b) No agreement is formed hereunder unless Buyer‘s order is accepted by J.W. Winco in writing. (c) The unenforceability or invalidity of one or more of the provisions of these Terms and Conditions will not affect the enforceability or validity of any other provision of these Terms and Conditions. (d) THESE TERMS AND CONDITIONS CONTEMPLATE THE
COMPLETE AGREEMENT BETWEEN J.W. WINCO AND BUYER AND NO ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS STATED BY BUYER SHALL BE BINDING UNLESS AGREED TO BY J.W. WINCO IN WRITING. No course of dealing, usage of trade or course of performance will be relevant to supplement or explain any terms used in these Terms and Conditions. (e) These Terms and Conditions are governed by and shall be construed in accordance with the Uniform Commercial Code as enacted by the State of Wisconsin. Business hours: 8:00 a.m. to 5:00 p.m. Central Standard Time, Monday through Friday. Various Holiday closings are observed.
Limited Warranty Limited Warranty: All products sold, are warranted by J.W. Winco, Inc. only to purchasers for resale or for use in business or original equipment manufacture, against defects in workmanship or materials under normal use for 90 days after date of purchase from J.W. Winco, Inc. Any part which is determined by J.W. Winco to be defective in material or workmanship and returned to J.W. Winco, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced. At J.W Winco‘s option the purchase price may be refunded. All returns must be pre-approved by an authorized J.W. Winco sales associate prior to return. All returns must reference the invoice number and return authorization number marked on the exterior of the package. Any damage or tampering to products resulting from improper packaging or handling will void any warranty or refunds at J.W. Winco‘s option. Limitation of liability: The above limited warranty is in lieu of all other warranties, expressed or implied, and there are no warranties which extend beyond the face hereof. J.W. Winco will not be liable for incidental, consequential or special damages or for any loss, damage or expense arising from the sale, use or installation of the items or from any other cause whatsoever, whether based on warranty (expressed or implied) or otherwise based on contract or in tort. J.W. Winco expressly disclaims any liability for consequential and/or incidental damages for all the following, but not limited to, lost sales, lost profits and injury to person or property. J.W. Winco‘s liability is limited to, and shall not exceed, the purchase price of the product. Warranty disclaimer: J.W. Winco has made diligent effort to illustrate and describe the products in this catalog accurately; however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty that the products are merchantable, or fit for a particular purpose, or that the product will necessarily conform to the illustrations or descriptions. No warranty or affirmation of fact, expressed or implied, other than set forth in the limited warranty statement above is made or authorized by J.W. Winco, Inc. J.W. Winco does not warrant or represent that merchandise sold complies with any Law, including but not limited to, OSHA, the Walsh-Healy Public Contracts Act, and/or regulations promulgated thereunder. No warranties to consumers: J.W. Winco makes no warranties to those defined as consumers in the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act. Advice: J.W. Winco assumes no obligation or liability for advice or assistance given or results obtained in connection with any goods sold. All such advice or assistance is given and accepted at Purchaser‘s risk. Any decisions as to use or installation of goods sold hereunder is that of the Purchaser. Cross reference information: Product crossreference comparisons do not imply that all products compared are available, or in the case of functional equivalency, that performance and other characteristics are perfectly comparable. For critical applications, review specifications prior to purchase.
Visit our web site to view our complete online catalog, shop online and download 3D CAD models of our parts!
www.jwwinco.com
Let us tell you 8 GREAT WAYS J.W. Winco, Inc. can help you reduce your overall costs! 1. Remember the value of standard machine components. They’re your best buy, saving countless hours of research, design and manufacturing time. We have over 18,000 competitively priced standard parts in stock with thousands more available quickly; all exceptional quality and the most modern designs. Why waste money on lesser quality components that result in product failure or equipment downtime headaches? 2. Download 3D CAD models for nearly our entire product line. A brief, one-time registration process allows you to access our free 3D CAD models. The eDrawings online CAD viewer enables you to see models right online, and you can download them in any of 19 different formats. 3. Shop online 24/7 with our eStore. View pricing right online and make your purchase with your credit card. For customers with established accounts, our eStore offers the ability to view pricing, track past purchases, and much more. 4. Receive the technical expertise you need to do it right the first time. Save time and trouble by talking with a technical sales expert who can answer all your questions, tell you the detailed specs you need to know, and offer suggestions for your particular application.
5. Simplify purchasing by going to one source. Save multiple purchase order costs – J.W. Winco offers North America’s largest selection of metal and plastic hand operating components, fastening, fixturing, and access hardware in both metric and inch sizes. 6. Get your required secondary machining and assembly from the same source. Assembly and handling time are added costs for you. Why not let us do the work? Our in-house machining facility can accommodate the special requirements of your application. 7. Satisfy your special labeling and packaging requirements. We can provide bar code and UPC code labeling and meet your other special labeling and packaging needs. Save costs by expediting your receiving and stocking process. 8. See how valuable a free shipping program really is. Not only do we provide free UPS shipping in the USA – (free shipping to the border for our Canada and Mexico customers), but you’ll never have a shipping document to check or to dispute. No shipping or administrative costs to boot!
When you buy from us, you purchase a complete overall cost reduction solution. That’s why we say… We’re more than just quality parts!
J.W. Winco, Inc.* Phone: 262/786-8227 800/877-8351 Fax: 262/786-8524 800/472-0670 E-mail: sales@jwwinco.com P.O. Box 510035 2815 S. Calhoun Rd. New Berlin, WI 53151-0035
J.W. Winco Canada, Inc. Phone: 800/877-8351 Fax: 800/472-0670 E-mail: sales@jwwincocanada.ca 2199 Dunwin Drive Mississauga, ON L5L 1X2 *J.W. Winco, Inc. is ISO 9001:2008 Certified.
1-800-877-8351 | www.jwwinco.com
Catalog # RMA101 Copyright April 2011