2012 FALL CATALOG

2012 - 77th YEAR - ISSUE 33

FALL CATALOG 2012

A FARMER’S HARVESTING GUIDEBOOK PONTIAC

815-844-6197

HERSCHER

815-426-2119

MINONK

309-432-2525

Hundreds of Harvest Items

OTTAWA

815-433-2211

STREATOR

815-673-3363

WELCOME

Although the fig tree shall not blossom, neither shall fruit be in the vines; the labour of the olive shall fail, and the fields shall yield no meat; the flock shall be cut off from the fold, and there shall be no herd in the stalls:Yet I will rejoice in the Lord, I will joy in the God of my salvation.

The Lord God is my strength.. -Habakkuk 3:17-19

Note from Clark & Lynn To our valued customers, Thank you for your support and patronage again in 2012. We appreciate each and every purchase, large and small.

For those of you who have been in the farming industry for fifty plus years, we have seen many challenging seasons and the dry weather summer has caused much concern. Hopefully, we can all continue to look at our agricultural operations through a long-term lens and remind ourselves that each year is different and has unique opportunities. In the Stoller operation we continue to plan for the future and have added a 10,000 square foot addition to the Pontiac shop with our first 60’ wide pivoting door. We added a new 70X120’ storage building at our Minonk store and have invested in new shop lights and roof also this summer. We recently recoated the parking lot at Ottawa and have laid plans for the new outdoor signage at Herscher and have completed a new roof at the streator dealership.

Our machinery line-up from Case IH and our other manufactures is on the cutting edge of technology. This fall we will be delivering our first independent all directional cornhead from Geringhoff. This machine has the potential to revolutionize spacing on corn rows and allow farmers the ability to boost seed population at planting time.

Please enjoy perusing through our fall catalog. Katrina Stoller, Rod Bertsche and Doug Patten take great pride in producing this publication and strive to make each issue more useful than before.

From our family at Stoller’s to your family, we sincerely thank you for the privilege of serving you, the American farmer.

2

Truly, Clark & Lynn

FALL BOOK

PARTS SPECIALS: ............................... 3 COMBINE................................... 3

Welcome to the family.

Stoller International is privileged to be a family-owned farm equipment dealer since 1935. We have been through 77 years of farming alongside our customers.

We have seen many, many harvests, often bountiful, beautiful crops, some however, not always plentiful. We’ve been through years like this one, where our optimism was drained as we waited for those scattered pockets of green on the screen to reach our newly planted fields and faithfully went on praying for the next glimmer of possibility to be on the horizon. Unlike many years in our history, there is still a future when the rains don’t come and the prices fade. We see the world growing and the future expanding, technology increasing, and farm equipment progressing. We are always thankful for the hope of tomorrow and the coming harvest.

Our family is pleased to serve your family on this journey together.

PLATFORM HEADS......................10

ROWCROP HEADS......................14

BATTERIES.................................18 LUBRICANTS............................. 19 FILTERS......................................20

FARM SUPPLY.............................21

TILLAGE PARTS......................... 24

GENERATORS..................................... 26 COMBINE INSPECTIONS.................... 27 WHAT’S NEW....................................... 28 SERVICE INSPECTIONS...................... 30 PRECISION FARMING........................ 32 GERINGHOFF CORN HEADS................ 34 STALK STOMPERS............................... 35 McFARLANE TILLAGE......................... 36 ORDER FORM/SHUTTLE..................... 38

3

COMBINE PARTS

CASE IH 8010

07 CASE IH 2588 RT, FT, CHOP, 2 SPEED HYDRO, PRO 600, Y/M LOG WITH TSD, UNL AUGER 6.4M EXT WEAR, LARGE WIRE CON...$185,000

941 SEP HRS, CHOP PLATFORM EXT 30”, SL CLEANING SHOE, GRAIN TANK EXT, YIELD MAP, HID, FEEDER W/ STONE TRAP...........$210,000

AFX ROTOR 87636594 86992118

80 & 88 Series Rotor 40, 44, 60, 66 Series Rotor

$6,591.25 $5,399.37

$4,999.79 $4,569.89

Why Purchase and AFX Rotor?

• The AFX rotor features graduated pitch inlet flights for a more smooth, relaxed crop flow from the feeder to the rotor discharge. More consistent material flow • Reduces peak rotor HP requirements in tough conditions • Results in quieter operation • Improves rotor thoughput capacity 5-25%, particularly in tough conditions • Depending on crops and conditions the AFX rotor can improve overall productivity and fuel efficiency • The AFX rotor creates a strong vacuum, moving dust away from the feeder house and cab area for excellent header visibility

TRANSITION CONES • Availabel for 40, 60, and 80 series combines • The standard steel transport vanes are extended to full depth of the cone to improve material flow • The standard steel vanes have 3/8” holes to accomodate stronger 3/8” T-bolts

B4265390

B92770

Heavy Duty 40, 44, 60, 66

$1853.53

$1,6269.99

B93199

Heavy Duty 40, 44, 60, 66

$1,729.99

$1,539.95

84265390

Heavy Duty 80 & 88

$1,750.17

$1,549.95

Kris Partner joined us this year at the Minonk Store. We are thankful for his excellent combine expertise and knowledge of machinery.

He is a great addition to the Stoller team of technicians.

4

The original Axial-Flow combines made the first big step in the rotary combine revolution. They set new standards for grain quality and grain savings – benchmarks the rest of the industry has been chasing ever since. But leaders don’t stand still; we’ve been continuously evolving for 35 years.

Every design innovation, each engineering improvement, puts these machines another step ahead. Introducing the Axial-Flow 30 Series combines. Climb up into the cab and take a look around. This is what leadership looks like.

Axial-Flow is still out in front. First with the most comfortable cab for long harvest days and longer nights. Meeting emissions regulations while actually improving performance and fuel efficiency. Of course, the real proof is in the grain tank. The sample tells the story – the original single rotor combine is still ahead of the field.

STOLLERIH.COM

CASE IH 2388 1,533 SEP HRS, ROCK TRAP, CHOPPER, HYD REVERSER .....$107,000

08 CASE IH 7010 835 SEP HRS, RT, LT, CHOP, PRO 600, GPS GRAINTANK, TOUCH SCREEN DISPLAY, ROUND BAR CONCAVE...$199,000

05 CASE IH 2377 AXLE EXTNSN, UNLD AUGER 5.5MM EXT WEAR, COURSE CHAFF ROTARY, RT...$145,000

COMBINE ROTOR IMPELLER KITS For 1400, 1600, 2100, 2300 Series Axial-Flow Combines B93730

Impeller Kit complete - Regular (40, 44, 60, 66 Series)

$759.66

B93731

Impeller Kit complete - Chrome (40, 44, 60, 66 Series) $1,160.69

$899.99

B93732

Impeller Kit compete - Regular (80, 88 Series)

$572.41

$486.49

B93733

Impeller Kit complete - Chrome (80, 88 Series)

$653.79

$555.72

B94524

Wear Bar Kit complete - Regular (40, 44, 60, 66 Series)

$181.52

$154.29

B94525

Wear Bar Kit complete - Chrome (40, 44, 60, 66 Series)

$295.86

$251.49

B94526

Wear Bar Kit complete - Regular (80, 88 Series)

$134.62

$114.49

B94527

Wear Bar Kit complete - Chrome (80, 88 Series)

$225.66

$191.79

RESTORE THRESHING EFFICIENCY Case IH Concaves are not linebored like some “might-fits.”

The unique 3-radius design provides a balanced system for best performance in feeding capacity and crop threshing.

Extension kits for standard concaves sold seperately.

CONCAVES

Impeller Kit

$607.79

Wear Bar Kit

CASE IH RASP BAR KIT

Install a Case IH Rasp Bar Kit & get original equipment quality, plus all new hardware for easy installation

Grain Rotor Rasp Bars/Half Sets B95358 40, 44, 60, 66 Series Specialty

$594.48

$505.29

B95365

$793.10

$673.99

80, 88 Series Specialty

Grain Rotor Rasp Bars/Full Sets B93417 40, 44, 60, 66 Series Standard

$553.10

B93418

$728.28

$599.99

$953.10

$709.99

$1,310.34

$1,099.99

80, 88 Series Standard

B93656A 40, 44, 60, 66 Series Specialty

B96128

2002 & Newer One Piece 40, 44, 60, 66 Series Set

$1,383.13

$1,175.49

B96125

2002 & Newer One Piece 80, 88 Series Set

$1,629.52

$1,384.99

B93572

Standard 40, 44, 60, 66 Series Set

$1,544.83

$1,313.09

B93574

Standard 80, 88 Series Set

$1,819.31

$1,499.99

87298938

Round Bar Concave Kit - Fits 80 size machines

$2,024.22

$1,720.49

B93657A

80, 88 Series Specialty

$470.19

CASE IH RASP BAR PACKS

• Specifically designed for your combine • Performance, strength, wear-resistance, & durability packaged for customer convience • Kit includes rasp bars, Grade 8 flange bolts, & nuts

B95267

60, 66 Series 3 Bar Kit

$59.72

$45.99

B95219

80, 88 Series 4 Bar Kit

$79.45

$67.49

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363

5

COMBINE PARTS

FEEDER CHAINS AND FEED CHAIN KITS Heavy duty, American made #557 chain and chrome pins.

Fully assembled feeder chain with bolted, easily replaceable slats. High-carbon steel slats offer up to 65% greater strength.

47” Smooth Feeder Chain 54” Smooth 2-Strand For 1620, 1640, 1644, 1660, 1666 Series Feeder Chain Part No. 117869A1 Reg Price $547.44 Sale Price $481.79

For 40, 44, 66 Series

54” Smooth 2-Strand Feeder Chain For 80, 88 Series

Part No. 117872A1 Reg Price $683.16 Sale Price $601.19

Part No. 117871A1 Reg Price $587.74 Sale Price $517.29

For 80, 88 Series

54” Serrated 3-Strand Feeder Chain Part No. 84207190 Reg Price $1,313.11 Sale Price $1,155.49

Feeder Chain Sprocket For 40, 44, 60, 66, 80, 88 Series

Part No. 195664A1 Reg Price $1,062.23 Sale Price $934.79

Part No. 1970248C1 Reg Price $129.09 Sale Price $113.59

With Rock Trap (2 used) For 7010, 8010 Series

Part No. 87397925 Reg Price $898.79 Sale Price $807.99

Drum Stop Kit

For 80, 88 Series

54” Smooth 3-Strand Feeder Chain

Feeder Chain

• Includes hardware and stops • Combines w/ stone retarder drums Part No. B95679 Reg Price $35.31 Sale Price $31.49

Feeder Chain

With Rock Trap For 7120, 8120, 9120, 7230, 8230, 9230 Series

Part No. 84179639 Reg Price $1,725.60 Sale Price $1, 549.99

Feeder Shaft Bearing

Part No. 84330027 Reg Price $62.07 Sale Price $54.62

3-Strand Feeder Chain For 80, 88 Series

Part No. B93532 Reg Price $1,873.10 Sale Price $1,648.39

CHAIN ROLLER KITS Install these roller kits and your combine will run quieter than ever

• These kits will reduce the wear on your feeder chain by keeping the chain off the upper and lower wear plates • Improved chain life • Fits all Axial Flow combines • Kit includes shaft, rollers, and required hardware

6

3-Strand Models 2-Strand Models 2-Strand Models Part No. B95753 Reg Price $460.00 Sale Price $413.91

40, 44, 60, 66 Series Part No. B95751 Reg Price $348.28 Sale Price $313.29

88 Series Part No. B95752 Reg Price $348.28 Sale Price $313.29

STOLLERIH.COM

CASE IH ROLLER CHAIN

Top Quality American Made Drive Chain. Pre-cut chains available for combines, platforms, and cornheads.

1321529C95

Feeder reverser with rocktrap (40, 44, 60, 66, 80, and 88 series)

$238.51

$214.59

1321524C94

Feeder reverser without rocktrap (40, 44, 60, 66, 80, and 88 series)

$143.07

$128.69

B192186

Tailings elevator drive (1440, 1460, 1480, 1640, 1660)

$43.04

$38.69

B1302671

Tailing elevator drive (1680-7088 2377 & 2577)

$42.77

$38.49

B1327724

Tailings elevator drive (44 & 66 Series)

$46.11

$41.49

B182774

Clean grain elevator drive (1440, 1460, 1640, 1660)

$70.47

$63.39

Clean grain elevator drive Horizontal Auger (1644, 1666, 1680, before s/n 47413, 2144, 2166, 2344, 2366)

$70.04

$62.99

B1321307

Clean grain elevator drive Incline Auger (1640, 1644, 1660, 1666, 2144, 2166)

$63.11

$56.79

B1327534

Clean grain elevator drive (1680 after s/n47413, 1688, 2188, 2388)

$65.85

$59.29

B192927

Unloader drive, Lower Auger (1440, 1460, 1480, 1640, 1660, 1680)

$40.79

$36.69

B113200A1

Unloader drive, Lower Auger (All 44,66, and 88 series)

$42.29

$38.09

B192928

Unloader drive, Vertical Auger (1440, 1460, 1480, 1640, 1660, 1680)

$37.77

$33.99

B1303207

Unloader drive, Vertical Auger (1644, 1666, 1688, 2144, 2166, 2188, 2388)

$39.12

$35.19

B617107R91

Variable drive, rotor (40, 44, 60, 66, 80, 88 series)

$18.95

$17.09

B94750

Main drive (963, 1063)

$176.43

$158.79

B199870

Main drive (943, 944, 1043, 1044)

$55.19

$49.59

B199869

Main drive ( 983, 1083)

$55.69

$50.09

B1321308

ELEVATOR CHAINS

These heavy-duty roller chains feature a pre-lubed chain that reduces break-in wear & heavy-duty rubber paddles.

1302201C91

Fits 1440, 1460

$330.80

$297.79

1321334C92

Fits 1640, 1644, 1660, 1666, 2144, 2166, 2344, 2366

$339.36

$305.39

Fits 1680, 1688, 2188, 2377 2388, 2577, 2588

$460.69

$414.59

Fits 5088, 6088, 7088, 5130 6130, 7130

$588.05

$529.19

$238.96

$214.99

87313692

87365387

1303114C91

Fits all Belt Driven Axial Flow Combines

Part No.87561634 Reg Price $574.48 Sale Price $499.99

STAINLESS STEEL AUGER TROUGH WEAR LINER KIT • Kit includes two stainless steel grain tank auger liners and 70 stainless steel pop rivets • Restore life to a worn tank bottom or protect new tanks from wear. The liners slip under the grain tank cross augers. Drill holes and pop rivets in place.

• For all mid-range Axial-Flow combines.

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363

7

COMBINE PARTS

2010 CASE IH 7120 PRO 600, 298 SEP HRS, LATERAL TILT, LARGE WIRE MODULE, 52” EXT ON UNLD, CHOP..$250,000

98 CASE IH 2388 3,900 SEP HRS, RT, CHOPPER, FT, BIN EXT, LONG AUGER, AG LEADER, A LOT OF NEW PARTS...$52,000

VERTICAL UNLOADING TUBE

CASE IH HORIZONTAL UNLOADING AUGER KITS

For 40, 44, 60, 66, 80, 88 series

• For most Axial-Flow Combines

Part No.B95650A Reg Price $857.93 Sale Price $759.39

• Now you can conveiniently renew componts or replace your existing horizontal auger with a longer unit. It’s your least hassle, least cost method of keeping your machine operating like new with original equipment parts.

UNLOADING AUGER ASSEMBLY WITH ENCLOSED GEARBOX

• Older machines (mid-production 1640, 1660, 1680) can be updated with Part No. B92949 gear box kit or by ordering the splined vertical auger and upper gear box.

• Horizontal auger kits with plain or perforated tubes include spill-saver and downspout

Auger Kit - Standard Duty B94091

172” two-piece Auger with center coupling

$1,335.86

$1,199.99

B94094

208” two-piece Auger with center coupling

$1,426.21

$1,279.99

B94095

208” two-piece Auger with center coupling and plain tubes

$2,920.00

$2,627.99

CASE IH ELBOW KIT Kit includes new style 20 rivet elbow. Rivet size has been increased from 1/4” to 5/16”.

Grease lines and mounting hardware are included but not shown. Available in standard duty and Extenda-wear versions.

8

Features: • Complete kit includes attaching hardware, chains sprockets, gearbox, lower support, and vertical auger • Fully enclosed gearbox with gears in operating oil Benefits: • Reduced installation time • Same reliable assembly as current production • Quieter operationa and longer life

Wet or heavy crop conditions can cause extreme loads on the grain tank unloading system. Case IH offers a conversion kit to update your Axial-Flow machine to current production with enclosed oil bath gearbox.

B92718

Lower Gearbox Kit

$1,812.41

$1,540.39

B92949 Lower/Upper Gearbox Kit $2,426.21

(Also requires horizontal unloading auger)

$2,061.99

s

Elbow AssemblyStandard Duty Part No.B94090A Reg Price $1,068.83 Sale Price $940.59

STOLLERIH.COM

04 CASE IH 2388 1,670 HRS, ROCK TRAP, CHOP, BIN EXT, OILER, WT BRACKET, CLEAN ...$140,000

CASE IH 2366 2,164 SEP HRS, CHOPPER, BIN EXT, ROCK TRAP, TIRES: 30.5x32, MUDHOG ..........$110,000

JOHN DEERE 8820 CALL STREATOR FOR DETAILS 815-673-3363 ........$12,000

EXTERNAL SIEVE ADJUSTMENT KIT

Part No. 427331A1

1644, 1666, and later machines

• Allows operator to adjust middle section of the chaffer and the shoe sieve from the side of the combine instead of adjusting from the rear of the combine • This kit helps to improve the cleaning capacity of the combine • All 2001 and newer combines are factory ready for this kit

Reg Price $477.93 Sale Price $419.99

Part No. 427332A1

1688 and later machines Also 1680’s with long sieves

Reg Price $487.59 Sale Price $428.99

CURVED SPREADER BAT KITS 40, 44, 60, 66 Series

80 & 88 Series

Part No.413004A1 Reg Price $229.24 Sale Price $201.49

Part No.400505A1 Reg Price $262.07 Sale Price $229.99

With this kit, you’ll be able to spread straw and chaff over a wider area up to 30’! The kit includes 6 bats (3LH & 3 RH) & all necessary mounting hardware

IMPROVED SHAKER DRIVE PIVOT SUPPORT KIT

Part No. B95353

Part No. B95354

• Support made from cast iron for Both Sides One Side greater strength and durability • Replaces prior welded “C” channel Reg Price $269.38 Reg Price $535.86 • Includes support and hardware Sale Price $236.99 Sale Price $471.49 • All models

COMPLETE SPREADER REPAIR KIT

• Seven bearings, fourteen Part No.B95291 flanges, and hardware Reg Price $251.45 • Original equipment parts Sale Price $221.29

Spreader Repair Kit

• For all Axial Flow combines • Handy service repair kit • Includes two bearings, four Idler Sprocket Package flanges and hardware Part No.

Part No.B95292 B95302 Reg Price

Reg Price $64.69 $29.93

Sale Price $57.69 Sale Price $26.29

Bed Auger Mounting Kit Part No. B94626 Reg Price $13.07 Sale Price $11.49

Spring Kit Fan Pulley Part No. B95208 Reg Price $52.55 Sale Price $46.19

Sieve Bushing Kit Fits late 1680-2388 Part No. B94625 Reg Price $61.94 Sale Price $53.17

Chain Guide Wood Block Kit Part No. B95300 Reg Price $14.96 Sale Price $13.09

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363

9

PLATROFM PARTS

CASE MX285 4,000 HRS, DELUXE CAB, BUDDY SEAT, SUSPENDED FRONT AXLE, ELE MIRRORS, RADAR, 4 HYD ............$110,000

2010 CASE MX275 DELX CAB, 10 FRT WGHTS, 500 LBS EA REAR AXLE, BIG HYD PUMP, 4 HYD, 19 SPEED ECO ............$172,000

UPTIME PACK

• Handy uptime pack for shop or toolbox • Double knife kits include knives and hardware • Single knife kits include knife and hardware • Knives are new, taller profile style

CHOPPER KNIFE KITS

External Straw Chopper Kit Providing four adjustment setting outside the combine, these kits allow you to position the fixed bar assembly to the crop residue length you need.

Designed for your convenience and improved management of residue.

80 & 88 Series Part No. B95783 Reg Price $678.62 Sale Price $602.99 40,. 44, 60, 66 Series Part No. B95784 Reg Price $651.72 Sale Price $579.99

10

Two Double Knives with 1/4” carriage bolts Part No. 87298693 Reg Price $16.00 Sale Price $14.39

Two Double Knives with #10 bolts Part No. B95767 Reg Price $20.99 Sale Price $18.59

Single Knife with 1/4” carriage bolts Part No. 87298694 Reg Price $8.19 Sale Price $7.29

Single Knife with #10 bolts Part No. B95906 Reg Price $10.20 Sale Price $8.89

Rotor Blade Kit Part No. B96349 Reg Price $36.00 Sale Price $31.69

DIAMOND SHARP SECTIONS & GUARDS SECTIONS

B93329P B93330P 112074P 191256P 86616691 87728905 84342600

$15.63 $21.13 $12.69 $15.06 $1.41 $1.81 $1.46

$13.91 $18.81 $11.29 $13.40 $1.25 $1.60 $1.29

1989552C1 1.5” cut 1020 series

$19.39 1307299C2 3” cut 1020 series prior to sn JBJ02301

$17.49 Case IH 87442324 3” cut 1020 series Heat Treated (sn CBJ02301 & after, also all 2000 series) $19.28 Sta-Sharp & Super Sta $21.19 Sharp sections have 87702974 3” cut 3000 series special design root 87560324 3” cut Hardened - Draper Heads $17.40 serration to prevent 87421451 3” cut Heat Treated - Draper Heads $18.55 excessive wear across HOLD DOWNS the top. Complete selection available 101001A2 1.5” cut 1020 series

$33.55 1307280C3 3” cut 1020 series

$4.46 86630786 3” cut 2000 & 3000 series $8.05 87407812 3” cut Draper Heads $9.34

$17.25 $15.49 $17.16 $18.79 $15.48 $16.50

GUARDS

1.5” cut-black (10 pack) 1020 series 1.5” cut-chrome (10 pack) 1020 series

3” cut-black (10 pack) 1020 series 3” cut-chrome (10 pack) 1020 series 3” cut 2000 series 3” cut 3000 series 3” cut Draper Heads

STOLLERIH.COM

$29.79 $3.97 $7.16 $8.31

11 CASE 340 MAGNUM 760 HRS, LUX CAB, SUSP AXLE, 19 SPD TRANSMISSION, 4 HYD BIG PUMP, 360 DEGREE HID, CAB SUSP. ELECTRIC MIRRORS, DUAL BEACONS, TIRES: MICH 50”, 3 UNITS IN STOCK............$219,000

CASE IH 305 1,605 HRS, LUX CAB, FRNT SUSP, MEGA FLOW PUMP, 5 HYD, HD DRAWBAR ...$179,000

CROP DIVIDER END ASSEMBLY

• Complete replacement end assembly for long dividers • Fully assembled - ready to install • Poly point B94154 B94155 87298163 87298164

LH 1000 series heads RH 1000 series heads LH 2000 series heads RH 2000 series heads

$442.76 $442.76 $428.97 $428.97

POLY POINT KIT Part No. B95408 Reg Price $46.90 Sale Price $38.95

$389.00 $389.00 $376.00 $376.00

CUTTER BAR REBUILD KITS 1020 SERIES • Kits are complete and include: guards, hold-down clips, wear plates, and hardware.

Kits with Knife Assembly - 3” Cut B95549 B95551 B95552

20’ Cut 25’ Cut 30’ Cut `

$1,388.97 $1,179.00 $1,713.10 $1,456.00 $2,042.76 $1,736.00

3” Split Knives Only 371619A2 20’ Cut 371621A3 25’ Cut 371622A3 30’ Cut

$464.15 $518.26 $611.48

$408.46 $449.79 $529.79

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 11

PLATROFM PARTS

2009 JOHN DEERE 8330 1,244 HRS, 4 HYD, POWER RETURN, BIG PTO, Q HITCH, 12WF .........$189,000

2007 JOHN DEERE 9620 2,579 HRS, GREENSTAR READY, 4 REMOTES, EXTRA WEIGHTS ON WHEELS .......$187,500

REEL TINES

WOBBLE BOXES

For 1000 Series Heads year 2000 & below Part No. B93868 Reg Price $2.99 Sale Price $2.59

1020 Headers (includes pulley) (Prior to 1995 models) Part No. 1316987C91 Reg Price $1,718.45 Sale Price $1,460.59

1020 Headers (oil bath) (1995 models and after) Part No. 398290A2E Reg Price $1,779.31 Sale Price $1,512.00

Part No. 1316987C91R (reman exchanged) Reg Price $910.52 Sale Price $810.00

Part No. 87502685R (reman exchanged) Reg Price $1,458.98 Sale Price $1,199.00

For 1000 Series Heads with Love Reels (front mount) Part No. B93867 Reg Price $2.65 Sale Price $2.09

For 1000 Series Heads with High Visibility Reels year 2001 & up also fits 2000 & 3000 Heads Part No. B95872 Reg Price $3.50 Sale Price $2.89

For 1000 Series Heads with Tear Drop Bats (rear mount) Part No. B93866 Reg Price $2.55 Sale Price $1.99

For Draper Heads Part No. 87561020 Reg Price $6.73 Sale Price $5.99

AUTOMATIC HEADER HEIGHT CONTROL

WOBBLE BOX REPAIR KIT 1020 Headers • Includes bearings, shims, and hardware • Fits Part No. 1330048C91and Part No. 1316987C91 Part No. B95203 Reg Price $202.76 Sale Price $172.35

FOR 1020 GRAIN HEADS

Part No. 434092A4E Reg Price $388.28 Sale Price $315.00

12

STOLLERIH.COM

*

速

SEE US TODAY! OFFER ENDS SEPTEMBER 30, 2012.

STOLLER INTERNATIONAL INC.

15521 E. 1830 North Road Pontiac, IL 61764 815-844-6197 www.StollerIH.com 309-432-2525 815-433-2211

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

815-673-3363 13

ROWCROP PARTS

1000 SERIES CORN HEAD KIT

Gathering Chain • Far greater wear life than imported “look-a-likes • Regular-duty chain for 800, 900, & 1000 series Part No.B176279C91 Reg Price $39.68 Sale Price $32.99

Standard Kit -1 Row Kit Includes: • Corn head knives (8) • Hardware Part No. B94532 900 & 1000 Series Reg Price $205.97 Sale Price $174.99 Stalk Roll Assembly Kit Includes: • LH & RH Roll Assembly • Lower support & hardware • Lower support shims • Spiral augers Part No. B92764A Reg Price $606.90 Sale Price $485.52

Outer Divider - LH Part No. 320084A1E Reg Price $335.53 Sale Price $295.19 Outer Divider - RH Part No. 320085A1E Reg Price $350.57 Sale Price $304.99

14

Drive Sprocket Part No. B94733 800 Series Reg Price $39.03 Sale Price $31.99 Part No. B94734 900-1000 Series Reg Price $36.55 Sale Price $31.49

Bearing & Shield Kit • Includes 2 bearings & 2 shields • Lower stalk roll Part No. B95612 Reg Price $108.28 Sale Price $86.62

Idler Sprocket Kit 800-1000 Series Part No. B94739 Reg Price $22.52 Sale Price $17.95

STOLLERIH.COM

1000 Series Stalk Roll Stripper Plate Kit • Made from high strength material for superior performance • Kit includes plates & hardware • Fits 900 & 1000 heads Part No. B95449 Reg Price $81.52 Sale Price $65.21

1000 Series Corn Head Ear Saver Kit • Reduce ear loss • High-strength rubber • Hardware included Part No. B94550A- Steel Hoods Reg Price $14.79 Sale Price $13.31 Part No. B94838A- Steel Hoods Reg Price $14.79 Sale Price $13.31 Skid Pad Kits Part No.B94736 Inner 30” Rows Reg Price $19.78 Sale Price $17.80 Part No. B94845 Outer all row sizes Reg Price $19.39 Sale Price $17.45 Point Kit Steel- Divider Part No. B94737 Inner - 30” Rows Reg Price $25.06 Sale Price $20.04 Part No. B94738 Outer-all row widths Reg Price $24.28 Sale Price $19.42

Stalk Roll Support Kit Part No. 87298084 (both sides) Reg Price $443.45 Sale Price $369.95 Part No. 87298082 -LH Reg Price $221.52 Sale Price $188.29 Part No. 87298083 -RH Reg Price $221.52 Sale Price $188.29

Grain Quality:

One of the basic fundamentals of an Axial Flow combine is grain quality. No other brand come close ! However, we would like to bring up three points when it comes to evaluatin g kernel damage relating to Corn.

Some operators believe that when they see kernel damage in the grain tank, that it was caused by the rotor. Contrary to belief, that is not true. The axial flow rotor is very gentle on the grain and is not likely the cause kernel damage unless it is so badly set (such as conc aves set too wide/or way to close, or excessive rotor speed). Here are three areas to consider when evaluating corn kernel damage:

1. Cornhead Auger setting should be considered. If the auger is set too low, the flighting can peel or cut the kernels right in half, especially in wetter moisture levels. If you are a fanatic about kernel damage, here is a recommendation about auger heights: With the newer Case IH corn heads, we have the option to adjust the auger flight off the bottom of the auger trough so as to have a layer of ears “still” left in the auger trough after the corn head comes out of the standing corn. This is so as not to allow the auger flight to slice into the ear of corn, causing crown dam age as the ear is transported to the feeder housing. If the corn head is bein g operated in commercial size ears, the auger could be as much as 2.25″ to 2.5″ of the bottom of the auger trough. Whereas, with popcorn, the auge r might be 1.75″ to 2″ off the bottom of the auger trough.

2. Watch excessive tailing levels. As you know, anything that goes through the tailings will get threshed again, and perh aps add to kernel damage. As a rule of thumb, you should not see more than a 1/3 of an auger of tailings. If you have more than this, make a sieve/fan adjustment to keep tailing low.

3. Check the clean grain elevator chain. If the chain beco mes too loose, the rubber paddles will bend over more, and any kernels trapped between the elevator housing and a loose paddle may encounter damage. Watch and control the above items and you will have the best grain quality around!

Exce rpt taken from CaseIHharvesting.com

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 15

ROWCROP PARTS

Geringhoff Northstar 1230 12 row .....$75,000

08 Case IH 3412 30’, excellent head, 4,500 ac FT w/ auto header, pinch knife roll ...........$59,000

2200, 2400, 3200, 3400 SERIES CORN HEAD KIT Low Profile Point Kits Part No. 87017985 30” Rows Reg Price $26.85 Sale Price $21.48 Part No. 87017986 36” & 38” Rows Reg Price $35.59 Sale Price $28.47 Part No. 87017987 20” & 22” Rows Reg Price $27.24 Sale Price $21.79 Ear Saver Kit Part No. B95582 Reg Price $21.24 Sale Price $18.05

Stalk Roll Assembly 1 Row • Stalk Roll tube knife style (2) • Knife (4) • Roint RH (1) • Point LH (1) • Gathering Chain (2) with chrome pins • Idler Sprocket (2) • Drive Sprocket (2) • Special hardware Part No. B95584A Reg Price $975.86 Sale Price $819.99

Outer Row Divider - 30” Rows Part No. 86620218 Reg Price $478.62 Sale Price $397.26

Idler Sprocket Kit Part No. B95573 Reg Price $20.70 Sale Price $16.56

Inner Hood - 30” Rows Part No. 86620224 Reg Price $471.03 Sale Price $390.96

16

Inner Row Divider - 30” Rows Part No. 86620220 Reg Price $525.16 Sale Price $439.99

STOLLERIH.COM

Drive Sprocket Kit Part No. B95574A Reg Price $56.97 Sale Price $45.58 2200 & 2400 Series Extenda-Wear Gathering Chain Part No. 86978515 Reg Price $65.27 Sale Price $57.43 2200 & 2400 Series Standard Gathering Chain Part No. 86979313 Reg Price $40.52 Sale Price $35.65

2200 & 2400 Series Corn Head Kits and Knife Blades • Each stalk roll contains two bolt-on knives with two cutting edges Kit includes: • The blades can be replaced individually without removing the stalk roll from the frame...reducing replacement time • Corn Head • The cutting edge of the knives are coated with a long wearing tungsten • knives (4) carbide and heat-treated making them extremely sharp and durable • Special • hardware • The coating on one side of the knife produces a self-sharpening design that ensures consistant performance throughout the life of the knife Part No. B95583A Reg Price $217.13 • Standard Kit - 1 row Sale Price $191.08

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 17

FARM SUPPLY

Good Old Fashioned

Plow Day. Saturday, June 30th.

Stoller Wheat Field. Gridley, IL

52 Antique Tractors. 75 Acres.

4 Hours. 30 Homemade Pies

Why Choose CNH Premium Batteries?

-CNH Batteries are designed to match the charging system -CNH Batteries are designed to meet rigorous off-road specifications

O UP T

15F% O F

• Built for vibrations up to 5G’s • Recharging capabilities (dormant product) • High cycling

ERIES T T A B Case IH Quality Batteries BMF31GW

12

950

190 post type

Fits most Magnums & combines

$114.70

$ 97.49

BMF31GSW

12

950

190 stud type

Fits most Magnums & combines

$114.70

$ 97.49

B2472W

12

600

115

Fits 86 series

$ 80.61

$ 68.52

BPR3EHW

6

850 280

Fits older IH tractors

$ 95.51

$ 81.19

BPR4EHW

6

930

320

Fits older IH tractors

$121.04

$102.89

BCM5DAW

6

1000

280

Fits older John Deere tractors

$106.88

$ 90.89

BHC30W

12

625

160

Fits older Case & Allis Chalmers

$108.49

$ 92.22

BCM1W

6

625

160

Fits H series Farmall

$ 63.77

$ 54.20

BCH2W

6

820

250

Fits M series Farmall

$ 89.21

$ 75.83

Lawn & Garden Quality

$ 58.66

$ 49.86

Quad-Trac plus 4WD

$167.92

$142.73

BU1W

12

342

42

BCH4DLTW

12

1000

220

Coolants

18

CC2820

Concentrate - 1 gallon

$ 27.89

$ 23.69

CC2825

Premix - 1 gallon

$ 17.25

$ 14.59

CC2848 CC2826 CC36077

Premix - 5 gallon Premix - 55 gallon drum Premix - 1 gallon (red)

$ 79.57 $818.21 $ 18.33

$ 67.59 $694.99 $ 15.59

STOLLERIH.COM

Preserve Your Investment at Stoller International with Quality

Case IH Lubricants

30W No. 1 Engine Oil Hy-tran Ultra 15W 40 No. 1 Engine Oil 30 gallon drum 55 gallon drum 30 gallon drum Part #407360R5 Part #999655R7 Part #253782A1 Reg Price $457.32 Reg Price $829.15 Reg Price $463.12

Lubricants

Sale Price $407.02

Sale Price $737.95

143945A2

Hy-tran Ultra 2.5 gallon

$ 43.82

$37.25

372705R7

Hy-tran Ultra 5 gallon

$ 76.60

$65.11

143947A1 407356R5

30W No. 1 diesel engine oil 2.5 gallon 30W No. 1 diesel engine oil 5 gallon

$ 45.99 $ 81.80

$39.10 $69.53

143949A1 407414R2

15W40 No. 1 diesel engine oil 2.5 gallon 15W40 No. 1 diesel engine oil 5 gallon

$ 45.42 $ 79.38

$38.61 $67.49

B85142

Gear Lube 85-140 weight 1 gallon

$ 21.96

$18.66

B85144 132096A1 B95920

Gear Lube 85-140 weight 5 gallon Grease for guns 14.5 oz. tube Grease for 2200 series corn heads -14.5 tubes

$ 97.65 $ 3.67 $ 6.03

$83.01 $ 3.12 $ 5.13

Sale Price $412.18

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 19

FARM SUPPLY

2011 CASE IH STEIGER 500 348 HRS, LUX CAB, 4 REM, HID, PS, STD PUMP, BEACON, GUIDANCE $249,000

CASE IH ECOLOTIGER 730B 21” BLADES, 4” COVR BOARDS, HDL 16” DISKS, VERY NICE UNIT ....$23,000

Tr alsoactor K ava its ilab le

FILTERS & FARM SUPPLY

20% F OKF ITS

Save more money with our kits versus buying filters individually!

Filters Priced Kit Sale Part No. Description Individually Price 60EKIT 1460 after sn 1501, 1480, 1660 before JJC0038396 with DT466 $189.79 $151.83

1680 before sn JJC0045689 with DT466 1600EKIT 1660 after JJC038346 with Cummins engine before engine 44500129 $282.46 $225.97

1680 after JJC0045689 with Cummins engine before enging 44500129 1600LKIT 1660 after JJC0038346 with Cummins engine after engine 44500129 $295.80 $236.64

1680 after JJC0045689 with Cummins engine after engine 44500129 2100EKIT 1666 after sn 106339, 1688 after engine s/n120957 $303.43 $242.74

2166 before sn 180000, 2188 before sn 191483 2100LKIT

2166 after sn 180000, 2188 after sn 191483

$309.99

$247.99

2300EKIT

2366 before sn 255699, 2388 before sn272999

$352.94

$282.35

2300LKIT

2366 after sn 255700, 2388 after sn 273000

$368.76

$295.01

2500KIT

2377, 2388 after sn HAJ0295001, 2577, 2588, 5088, 6088, 7088

$404.78

$323.82

All kits include oil, fuel, water, hydraulic, and inner & outer air filters.

Filters are boxed and ready to go for your convenience!

20

STOLLERIH.COM

‘12 KUBOTA M135X WITH LOADER & BUCKET ........$69,000

‘11 CASE IH ECOLOTIGER 870 11 SHANK, 22’, SINGLE POINT, DISC LEVELER WITH SPIKE HARROW ..........$69,500

CASE IH STEIGER 450 222 HRS, PTO, DIFF LOCKS, LUXURY CAB, TIRES R42-R .........$249,000

Trash Pump Hose Kit

Part #98128657 Reg Price $99.95

Sale Price $79.99

Rapid Sorb Floor Absorbent 50# bag Part #OILDRY Reg Price $6.35

Trash Pump

2”-7HP Part #WP2070CM Reg Price $199.95

Sale Price $164.59

Sale Price $5.29

Implement Tires 9.5L-15 (8Ply)tubeless Part #95L15-8R-I Reg Price $107.36

Sale Price $85.99

11L-15 (8Ply) tubeless Part #11L15-8R-I Reg Price $123.12

Sale Price $99.99

Fresh Cab Rodent Repellant Also absorbs odors (4 pack) Part #FRESHCAB Reg Price $14.50

Sale Price $12.49

Cam Straps, Rachet Straps, Tie Downs, & Tarp Straps 58510

2” x 30’ Rachet Strap

$24.02 $20.39

58527

2” x 27’ Rachet Strap

$25.07 $21.29

51316

1” x 15’ Rachet Strap

$14.91 $12.59

58504

2”x7’ Tie Down

$17.55 $15.44

06701

10” Tarp Strap

$ 0.69 $ 0.59

06702

15” Tarp Strap

$ 0.83 $ 0.74

06703

21” Tarp Strap

$ 1.29 $ 1.09

06704

31” Tarp Strap

$ 1.73 $ 1.49

06715

41” Tarp Strap

$ 2.55 $ 2.19

59801

4” x 30’ Recovery Strap

$73.80 $62.69

59802

6” x 30’ Recovery Strap

$113.40 $89.99

Portable Heater 170,000 BTU/H Part #MC170DGD Reg Price $383.90

Portable Heater

75,000 BTU/H Heats up to 1750 sq ft 5 Gallon Fuel Tank 9 hours of use Part #MC75DGD Reg Price $244.81

Sale Price $349.95 Heats up to 4000 sq. ft.

13 Gallon Fuel Tank 10 to 13 hours of use

Sale Price $221.95

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 21

FARM SUPPLY

Battery Charger

FARM SUPPLY

300/200/60/30 amp Part #SE8050DS Reg Price $305.06

Battery Charger 200/30/10 amp Part #SE3010DS Reg Price $143.29

Sale Price $121.99

Sale Price $259.99

Battery Charger

200/100/40/ 10/2 amp Part #SE4020DS Reg Price $173.79

Sale Price $147.99

CLEANING SUPPLY

Case IH Chemicals

Shop Towels 3000 Towels per box Part #TOWEL Reg Price $73.25

Sale Price $63.99

Shop Towels 60 Towels on a roll Part #54400 Reg Price $2.24

Sale Price $1.89

22

200 Count Bucket of Towels Part #55208 Reg Price $16.99

Sale Price $14.29

ZRG017BRC B505500

Brake Parts Cleaner Chain & Cable Lube

$4.29 $6.64

$3.49 $5.29

B505502

Penetrating Oil

$4.63

$3.69

B505501

Rust Penetrating Oil

$4.36

$3.49

MCAS11

Fluid Film (11 oz.)

$8.99

$7.69

ZAD3

Starting Fluid (7 oz.)

$4.39

$3.69

ZAD4

Starting Fluid ( 11 oz.)

$4.82

$4.09

The Original Scrubs in a Bucket

• Heavy-duty, pre-moistened disposable towels • Removes grease, sealants, adhesives, oils, and more from hands and tools • Contains glycerine, jojoba, vitamin E, & aloe vera • Each re-sealable, popopen tub contains 90 multi-purpose towels Part #TW-90 Reg Price $16.89

Sale Price $14.69

STOLLERIH.COM

Eease Gun E R r F G

tion r Ac

r 12 o e oef Gun s a h purc Greas wi1th4 volt 1 value .3

Leve

$21

12 Volt Cordless Grease Gun

2 Battery Kit Part #1244 Reg Price $226.50

Sale Price $179.99

14 Volt Cordless Grease Gun

2 Battery Kit Part #1444 Reg Price $298.50

Sale Price $229.99

115 Volt AC Fuel Transfer Pump 20 GPM Part #FR700VA Reg Price $623.05

18 Volt Cordless Grease Gun

115 Volt AC Fuel Transfer Pump 13 GPM Part #SD602 Reg Price $429.74

2 Battery Kit Part #1844 Reg Price $315.00

Sale Price $289.99

Sale Price $548.19 Sale Price $378.17

Fill-rite Products: The following accessories available in stock.

N075UAU10 N100DAU10

Fill-rite Auto shut off nozzle: 3/4” inlet Fill-rite Auto shut off nozzle: 1” inlet

$66.90 $79.95

$56.86 $67.95

FRH07514 FRH07520 FRH10020

Fill-rite Replacement hose: 3/4” dia. x 14’ Fill-rite Replacement hose: 3/4” dia. x 20’ Fill-rite Replacement hose: 1” dia. x 20’

$26.78 $37.05 $51.69

$22.76 $31.49 $43.94

12 Volt DC Heavy Duty Transfer Kit Part #FR1210C Reg Price $438.84

Sale Price $386.17

100 Piece SAE Grease Fitting Assortment

Part #MC5417 Reg Price $37.43

Sale Price $31.99

FREE

P istol G rip Gre ase Gu with pu rcha Greasese of 18 volt Gun

$21.31

n

value

60 Piece Metric Grease Fitting Assortment

Part #MC5418 Reg Price $28.97

Sale Price $24.99

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 23

TILLAGE

CASE IH & DMI CHISEL PARTS

GENUINE BLU-JET REPLACEMENT PARTS AM2438

Shank

$535.00

$479.00

70210154 Summer Point

$51.00

$43.29

70210153 Fall Point

$70.00

$59.95

AP2701

$51.00

$42.95

Coulter

87460075

2” Parabolic Point

$69.00

$59.93

87460069

5” Wing Point

$102.63

$91.29

87460070

7” Wing Point

$118.22

$105.21

87460072

10” Wing Tiger Pint

$142.50

$126.83

87460159

10” Replaceable Tip

$255.97

$227.81

87388006

8” No-Till Wing Point

$157.01

$139.73

33310079

4” Moldboard

$26.51

$23.51

33310080

6” Moldboard

$23.89

$21.43

33310070

8” Moldboard

$30.52

$27.49

87443008

20” Disc Blade

$55.36

$47.05

87443010

22” Disc Blade

$54.08

$47.96

70210153

M&W EARTHMASTER PARTS

AP2701

LANDOLL WEATHERPROOFER PARTS Dorsal Fin Point Part No. RPLAW27HF Reg Price $41.73 Sale Price $37.49

Winged Point Part No. 131085 Reg Price $98.88 Sale Price $84.04

Wear Guard Part No. 167-0047 Reg Price $67.51 Sale Price $53.95

22” Disc Blade Part No. 22X1414SRE Reg Price $60.40 Sale Price $54.37 24” Disc Blade Part No. 24X1414SRE Reg Price $65.95 Sale Price $59.35

RM12

Plain Point (uses pin)

RM12HF Hardface Point (uses pin)

$14.17

$12.75

$23.00

$20.70

77MW

Pin

$6.34

$5.71

88MW

Oversized Pin

$9.78

$8.80

AL2460282 Plain Point (uses bolt)

$56.32

$45.06

AL2460283 Winger Point (uses bolt) $102.22

$81.78

87618075 22” Disc (Case IH Earth Metal)

$52.03

$44.23

998865R3 24” Disc fits M&W

(Case IH Earth Metal)

$59.48

$50.55

RM12HF

AL2460282

RM12

77MW

24

STOLLERIH.COM

Genuine Case IH Disk Parts 87442983

20” x 5mm Disk Blade fits Case IH Disks w/ 1.5” Round Hole

$37.73

87442993

22” x 5mm Disk Blade fits Case IH Disks with 1.5” Round Hole

$44.08 $37.47

87618084

20” x 4mm Disk Blade fits IH Disks with 1-1/8” Square Hole

$35.36 $25.95

87618089 ST491A 123096A2 63881C92

22” x 5mm Disk Blade fits IH Disks with 1-1/8” Square Hole Heavy Duty Gang Disk Bearing for most IH Disks Wheel Bearing Kit for most Case IH Disks Wheel Bearing Kit for most IH Disks

$44.09 $36.99 $46.36 $37.29 $73.61 $59.49 $78.86 $57.39

New Super SharpTM Earth MetalTM disk blades.

Edge stays 5 TIMES SHARPER to cut residue from BT crops.

$28.09

Case IH Maxxi-Point and Maxxi-Width are made with Earth MetalTM steel that wears up to 20% longer than regular steel sweeps.

GLENCOE & OTHER TILLAGE PARTS

CASE IH CHISEL PLOWS & CONSER-TILL PARTS

SL124L 4” Twisted L

$18.86

601986R1

2” Straight Point

$13.95

$11.49

3” Twisted LH Shovel

$18.49

$16.59

$20.96

SL124R

4” Twisted R

$20.96

$18.86

594545R1

SSP22L

4” Twisted Assy - Point L

$12.75

$11.47

594546R1

3” Twisted RH Shovel

$18.49

$16.59

$12.75

$11.47

812384C3

3.5” Twisted LH Shovel

$25.19

$22.68

SSM24L Moldboard L

$19.33

$17.40

812385C3 28597R1

3.5” Twisted RH Shovel Gang Disc-Conser-Till

$25.19 $52.18

$22.68 $44.36

SSP22R

4” Twisted Assy - Point R

SSM24R Moldboard R

$19.33

$17.40

SSF20L

Frog L

$28.65

$25.79

SSF20R

Frog R

$38.86

$27.69

SL124

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 25

STOLLER SERVICES

GENERATORS

See us for any size generator sets from Small Portables to 2 Mega-watt Stationary

Contact Chris Steffen

Generator Tech for over 25 years 815-844-6197 (w) 815-674-3668 (c) csteffen@stollerih.com

PREVENTATIVE MAINTENANCE PROGRAM

26

Stoller International dealerships are distributers for Katolight & Voltmaster America Generators as well as Industrial Kohler generators.

STOLLERIH.COM

$239 COMBINE INSPECTION

160 POINT

CHECKOVER FROM OUR BEST-IN-THE-BUSINESS FACTORY TRAINED CERTIFIED COMBINE TECHNICIANS

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 27

STOLLER SERVICES

ONLY

$7 PER

BLADE

MT-16 GRAIN MOISTURE TESTER

Features: • Direct read-out for 16 grain: Barley, Canola, Corn, Flax, Oats, Rice (2), Rye, Sorghum, Soybeans, Sunflower (2), & Wheat (4) • Each scale can be adjusted to match local elevator • Automatically averages up to 99 test results • Includes sturdy carrying case with strap • 2 year warranty in North America

28

STOLLERIH.COM

Moisture Tester Part #B96650 Reg Price $232.88 Sale Price $204.59

Have us sharpen the

blades on your

330 True-Tandem Turbo Disk Have “like new” blades in minutes

NEW!

ToughCam Digital Wireless Observations System Part #ZAEWVOS5MDCL1B One Camera Wireless System Reg Price $599.99 Sale Price $539.95

1 Camera System Part #ZAEVOS7MDCL1B Reg Price $299.99

Sale Price $269.99

2 Camera System Part #ZAEVOS7MDCL2B Reg Price $399.98

Sale Price $359.99

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 29

PLANTER INSPECTION • Press Wheels • Depth Control • Wear Pad on Center post • Seed Tubes • Seals • Marker/Disc Bearings • Transmission • No Till Coulters • Drive Shaft U-Joints

• Centering Rollers • Lift Cylinder for Leaks • Insecticide Clutch • Disk Openers • Check Solenoids • Electric Point Row Clutches • Scraper • Transport Lock Adjustment • And MORE!

ONLY

$10

OW PER R

30

ONLY

$10

PER ROW Let our qualified service people inspect your Kinze and Case IH planter before you go to the field. Save yourself the costly down time and sign up now!

For only $10.00 per row, you can have your Kinze planter inspected by our factory trained technicians. We inspect and discuss what we find.

Then YOU tell us what YOU want done.

PLANTER INSPECTION • Firming/Press Wheels • Shoe & Deflector • Main Drive Wheel • Covering Disc • Depth Control • Marker Discs • Scraper • Seed Metering System • Transmission

STOLLERIH.COM

• Pivot Transport • Opener Discs • Row Seed Hopper • Granular Chemical • Gauge Wheels • Bulk Fill • Electrical • Firming Point • And MORE!

ONLY

$129 99

TRACTOR SERVICE SPECIALS

102 POIN INSPECTIOTN

102 Point Tractor Inspection Models include STX and 9000 series 4WD Steigers, Magnum, and Maxxum tractors & 88/86/66/90/94 Series tractors......$12999

Help Yo

urself to

Va

luable A Case IH FS Acad c u s to m (Advanc emy Off ers have e a d n erings Farm exte that foc uses on ing Systems) A nsive offering o Case IH cademy, f classes a t precisio Buildin n farminnew, dedicatedhrough the AFS g the ba training g p roducts priority se capa program . for Case for Case IH in bilities for Adv 2 a 0 I helping H North Am 12, says Trevo nced Farmin increasinour customer erica. “Classes r Mecham, AFSg Systems is a t s st op off M g their e fficiencyay on the leadinered through Aarketing Mana ger F a g nd minim SA ed AIR CONDITIONING AFS Aca izing do ge of technologcademy are demy is c la availab wntime y while sses; Convert your tractor or combine’s air ,” he poin instructdealer-based in le to customers ts out. s o t in r r u led train t c conditioning system from R12 coolant to to ing sess tor-led traininghree unique for ions. m ; and inte Web-ba new style R134A coolant. R12 coolant is almost nsive th ats: web-based ree-day Custom sed Training regional 6 times higher in price compared to R134A. you can ers can access t r e a x 99 in p lore the ing thro comple Prices starting at.................................$379 tr ug and mo te web-based coaining catalog, h the AFS Aca re. w d urses, d ownloadatch tutorials a emy web porta 400 SERIES ENGINE OVERHAUL in fo Dealerrmation nd videos, en l. Here, roll al docum A 400 Series Engine Lower Overhaul should be Dealers based Instructo ents and in have the r le d guides, T c raining ustom oppo done around 4,000 hour mark. Includes rod & Contacters on-site. Thertunity to hold main bearings, gaskets, oil, filters, and labor. if a sess your Case IH se classes are s instructor-led ion will c d t 99 be held ealer for more heduled to last raining session Prices starting at............................$799 near you s informa n Regiona tion on o more than fi for . l I n t h s t e ructor-L se sessio ve hours.

Regiona CDC ENGINE TUNE-UP e ns or to will last l training sessiod Training Ses s ee s t io h n r s n e Magnum Tractors and Combines with CDC a s e r days an e planne for: d will co d ver diffe for customers Engines 1,500 hour tune-up. This includes rent cou in Aug. 28 rse mate 2012, too. Ea testing injectors, adjusting valves, checking ch rial. The Sept. 4- -30, Nevada Tr y are sch event 6 a , in R eduled in a cin gC timing, vibration dampner, fan belt, Oct. 31Nov. 2, e Training Cen enter, Nevada , Memph t water pump, belt tensioner, and checking is Train er, Racine, WI IA The AFS ing Cen A c a t er, Mem de coolant condition. both we phis, TN b-basedmy Customer T raining and inst Prices starting at.........................$47999 C r u a c t alog sho tor-led.

“The AF wcases t training S Academy pr he cour o ses avail n v e id c e e ssary to s Case I Mecham able, H m industry . “It is one mo aximize their customers wit cu re ht and help ing our example of howtting-edge prec he knowledge custome C a s e IH is leaision technolo and rs Be Re gy, ding the ady.” equipm ” says ent

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-336 31

PRECISION

FM1000

Autopilot

EZ 250

FM750

!

W NE EZ Steer

EZ Pilot Kit

Call Jim Muhlstadt at 815-791-9795 to

find out how we can enhance your farming operation.

32

STOLLERIH.COM

We are your

sourc g u i d a n ceef o r and applicatio control n solutions

These are photos of actual customers running on the Stoller RTK Network.

If you want sub-inch accuracy with the freedom to roam anywhere without dragging a base station with you, give us a call!

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 33

GERINGHOFF

Geringhoff gave a few of their dealers the opportunity to visit the birthplace of the Geringhoff cornhead in Germany last spring. Clark & Cindy Stoller had the opportunity to visit the factory as well as visit with 3rd generation Geringhoff owners (lower left). Stoller’s see a very bright future for the growth of this company and are looking forward to a continued partnership with Geringhoff.

The Geringhoff Rota-disc fits all makes of combines and leads the industry in with the newest technology and innovation. The Rota-disc offers a reliable, highly efficient, robust and well thought out corn heads and covers even the smallest detail.

34

STOLLERIH.COM

STALK STOMPERS As low as

$572

McFARLANE

Ask about our

NEW McFarlane Quadra-TILL being setup in our shop as you read this!

Give farm equipment expert Fred Gilman a

call at 815-848-1018

Fred Gilman

Stoller’s Tillage Expert

36

STOLLERIH.COM

FALL MFG. CO. INC.

QUADRA-TILL

RELY ON TRUE VERTICAL TILLAGE

SPRING REEL DISK The Real Vertical Tillage System

SEE YOU at With the McFARLANE vertical tillage system a single pass the WPS Farm Show with the QUADRA-TILL in the fall and a single pass with the REEL DISK in the spring will create the perfect seedbed March 27th-29th, 2012 815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363 37 saving time expense, and preparing your fields for spring

PONTIAC HERSCHER MINONK OTTAWA STREATOR

Stoller International

Order Form

We look forward to serving you again this fall. Please fax, phone, or e-mail your fall order to us and we will fill the order and call you for pick-up. As always, your business is appreciated. Questions? Feel free to give us a call. We are here to answer your questions.

Name:__________________________________________________________________ Address_________________________________________________________________ Phone:_________________Fax:_______________E-mail:________________________ Qty. Part No.

Description

Price

Total

* Stoller is not responsible for typographical errors in this book

38

STOLLERIH.COM

Meet our Fearless

Shuttle Drivers Clint Steffen

David Wettstein

Craig Duncan

Stoller

Northeast Shuttle

East Shuttle

Manteno West

St. Anne

Tim McCorkle Farm Building -10:45 am

Wm. Hoekstra 10:30 am

Manteno East

St. Anne

Beecher

Momence

Monee

Morocco

Elwood

Donovan

Minooka

Watseka

Kevin Reardanz Farm 11:15 am Bill Kass Repair 11:45 am New Ag Center 12:30 pm Walts Shop 12:45 am Hintzsche Fertilizer 1:15 pm

Parts Shuttle

Gilman Fast Dist.

1:30 pm

Jim Witvoet 10:45

Piper City

F&R Trailer Sales 1:45 pm

Van Drunen Farms 11:15 am Jack Storey Farmstead 12:05 pm

Orders need to be placed at the Herscher store by 9:00 am on the day of shuttle departure.

Contact Roger, Dennis, Wayne, Doug, Ron or Jim at the Herscher store. Orders need to be placed at the Pontiac store by 8:00 am on the day of the shuttle departure. Contact Dale, Clint, Mike, or Scott at the Pontiac store.

Hooper Elevator 12:25 pm Aduro Graphics 1:10 pm

Morris

Morris Airport 1:50 pm

Runs Monday, Wednesday, Friday. Drop-off times are estimated and not guaranteed depending on size of the orders for that day.

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363 39

STOLLER INTERNATIONAL

PRSRT STD U.S POSTAGE PAID HEYWORTH, IL PERMIT NO. 19

15521 E. 1830 NORTH RD. PONTIAC, IL 61764

USED EQUIPMENT SEARCH

STOLLERIH.COM

NEW FACES AROUND STOLLER INTERNATIONAL

Stoller International

ONLINE PARTS CATALOG

Travis Hodgins Technology Intern

Austin Moore Certified Technician

Kris Partner Certified Technician

Tyler VonNordheim Certified Technician

Garmer Kleen Setup Specialist & Driver

Luke Wilkerson Detail Specialist

Mclane Steidinger Setup Specialist

Bret Sarff Certified Technician

JW Ashton Parts Department

www.STOLLERIH.com

PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197

815-426-2119

309-432-2525

815-433-2211

815-673-3363