IS II active Implant by Kei Lim

IS-II active Product Catalog

Contents IS-II active S.L.A. Surface

IS-II active Features

IS-II active Line up

IS-II active Flow Chart

IS Full Kit

IS Full Kit Components

IS-II active Drilling Sequence

IS-II active S.L.A. Surface S.L.A. (Sandblasting with Large grit and Acid etching)

IS-II active Surface

Macropore & Micropore

As making micropore in macropore, increasing contacted area with bone and helping blood mevement.

S.L.A. Surface

S.L.A.

SLA surface is the method that make rough surface by blasting on Machined implant suface with HA(HydroxyApatite) particle smaller than 50ă&#x17D;&#x203A;, and oxidizing with acid. As making micropore in macropore, this makes increasing contacted area with bone(BIC ratio)m promoting cellâ&#x20AC;&#x2122;s activity. Shortening the contact time between bone and implant, reducing treatment period.

S.L.A. Surface Treatment Process Miling

Blasting

Acid Etching HA Powder

Machined

RBM

S.L.A.

IS-II active S.L.A. Surface S.L.A. Surface Roughness Stable and equal roughness / R.A 2.0

1,960 RA(㎛)

2,020 RA(㎛)

‘S’사 SLA Surface

Neobiotech S.L.A. Surface

S.L.A. Surface cell adhesion capability Comparing with Machined Surface and RBM Surface, It is reported that more cells adhered on Titanium Disk in S.L.A surface case.

Machined

RBM

S.L.A.

New bone formation measure of distance New bone formation measure of distance is longer in S.L.A surface cases comparing with RBM surface

RBM

신생골 형성 거리 Left : 1.976㎜ / Right : 2.35㎜

F : Fixture / BM : Bone Marrow

S.L.A.

신생골 형성 거리 Left : 2.460㎜ Right : 2.41㎜

F : Fixture / BM : Bone Marrow

IS-II active Features IS-II active is developed with many researchs and Knowhow from clinical studies for 10years. S.L.A. surface treatment - Fast and strong Osseointegration Bioseal heal on fixture upper part - Preventing of bone loss by increasing soft tissue attachment Magic threa & coronal macro thread - Strong primary stability BioSeal Increase sealing of soft tissue, and Minimize bone loss

Coronal Macro Thread Excellent primary stability at cortical bone.

Straight –Taper Body ＊Easy Drilling and implant insertion ＊Easy self compaction at soft bone

Magic Thread The body is specially designed to endure vertical vertical force and lateral pressure effectively.

Apex Powerful and well-defined threads exist at the peak of the apex. Drilling power is remarkable and initial fixation at the apex is excellent to both immediate placement and immediate loading.

S.L.A. Surface No impurities on implant surface(No residual acid and cell toxic) Optimal Rough Average(similar rough average with straumann SLA R.A)

BioSeal Application of machined surface & Micro groove on 0.5mm of upper part. Bioseal is unique design to minimize bone loss by maximizing sealing effect of soft tissue

Coronal Macro Thread CPowerful and well-defined threads exist at the peak of the apex. Drilling power is remarkable and initial fixation at the apex is excellent to both immediate placement and immediate loading.

Magic Thread Magic thread (Reversed thread type) is designed to resist strongly against occlusive force and lateral force in the long term. So,Operator can experience stable insertion and strong initial stability

IS-II active Features IS -II active Fixture Connection Conical Seal & Internal Hex structure 22â&#x2C6;&#x2DC;

22â&#x2C6;&#x2DC; 0.4mm

- Group A : IS-II active all Narrow, Regular, Wide 7.3mm Fixture - Group B : IS-II active Regular, Wide 8.5, 10, 11.5, 13mm Fixture

Group A(Gray)

Group B(White)

IS-II active Fixture is compatible with all upper prosthetics of IS system When Prosthetics are connect to Group A, Prosthetics will be connected 0.4mm higher than Group B. * In order to increase strength of fixture body, Internal hex of Group A is designed 0.4mm higher than Group B.

Fixture Placement

Take out a package from outbox

Remove internal package

Connect Fixture with Driver

Remove the holder after connecing Fixture with Driver

Remove the back

Take out holder

IS-II active Fixture Line Up Narrow Ø 3.5 Ø 3.5

Actual Size

Length

Length(mm)

Code

8.5

BIS3508A

BIS3510A

11.5

BIS3511A

BIS3513A

Length(mm)

Code

7.3

BIS4007A

8.5

BIS4008A

BIS4010A

11.5

BIS4011A

BIS4013A

Length(mm)

Code

7.3

BIS4507A

8.5

BIS4508A

BIS4510A

11.5

BIS4511A

BIS4513A

Length(mm)

Code

7.3

BIS5007A

8.5

BIS5008A

BIS5010A

11.5

BIS5011A

BIS5013A

Ø 3.5

Regular Ø 4.0 Ø 3.7

Actual Size

Length

Ø 4.0

Regular Ø 4.5 Ø 3.9

Actual Size

Length

Ø 4.5

Wide Ø 5.0 Ø 4.4

Actual Size

Length

Ø 5.0

IS-II active Fixture Line Up S-wide Platform

Diameter(Ø)

Length

5.5

Platform(Ø)

4.5

Diameter

6.0

7.0

4.9

5.8

Length(mm)

Code

7.3

BIS5507A*

8.5

BIS5508A*

BIS5510A*

11.5

BIS5511A*

BIS5513A*

7.3

BIS6007A*

8.5

BIS6008A*

BIS6010A*

11.5

BIS6011A*

BIS6013A*

7.3

BIS7007A*

8.5

BIS7008A*

BIS7010A*

11.5

BIS7011A*

BIS7013A*

Length(mm)

Code

5.0

BIS5005A

6.0

BIS5006A

5.0

BIS5505A*

6.0

BIS5506A*

Short Platform

Length

7.3mm

Diameter(Ø)

Platform(Ø)

5.0

4.4

5.5

4.5

Diameter

S-wide Kit

* Additionally S-Wide Kit is needed to place S-wide Fixture and Ø 5.5 Short Fixture

IS-II active Prosthetic Flow Chart Solid Abutment

Plastic coping

Lab analog

Impression cap

1.2 Hex driver

Healing abutment

Solid abutment

Protective cap

Cover screw

1.2 Hex driver

IS-II active

IS-II active Prosthetic Flow Chart Cement & Screw Abutment

Straight

SCRP multi

Hex

Gold

SCRP multi

Hex

Non-hex Abutment positioner

Angled

Non-hex

CCM

Plastic coping

Hex

Non-hex

Shapable

Lab analog Hex

SCRP multi

Non-hex

Hex

Non-hex

Lab analog

Pick up 1.2 Hex driver

Non-hex

Healing abutment

Plastic

Impression cap

Hex

SCRP multi

Hex

Transfer

Abutment positioner

Cover screw

IS-II active

1.2 Hex driver

Impression coping positioner

IS Full Kit Drill Extension

Surgical Drill

Point Lindemann

Stopper

Connector

Countersink

Profile Tap

Parallel Pin

Direction Pin

Fixture Driver

Hex Driver

Features of IS Full Kit 1. Easy Drill choice by simple Drilling Sequence and guideline on the Kit tray. Use drills sequentially when placing wide fixture.

Ex) When placing Ø4.5 Implant Ø2.5/LD Drill >> Ø2.2 Drill >> Ø2.9 Drill >> Ø3.4 Drill >> Ø3.9 Drill

2. Select Countersink or Profile Tap for IS, IS-II Fixture.

Ex) When placing IS Ø4.5 Implant Ø2.5/LD Drill >> Ø2.2 Drill >> Ø2.9 Drill >> Ø3.4 Drill >> Ø3.9 Drill >> Ø4.5 Counter Sink

Product lists which can be placed with IS Full Kit

IS - II

IS - II active

※ Additionally S-wide Kit is needed when placing IS S-wide or IS-II S-wide Fixture

IS Full Kit Components Direction Pin

Surgical Drill Diameter

Code

Diameter

Code

Point Lindemann

LDS25

Ø5.0

DPI50

Initial Drill Ø2.2

TSD22F

Ø6.0

DPI60

Twist Drill Ø2.9

TSD29F

Twist Drill Ø3.4

TSD34F

Twist Drill Ø3.9

TSD39F

Twist Drill Ø4.4

TSD44F

Stopper

Connector Type

Code

Ratchet (Long)

RC15

Ratchet (Short)

RC10

IS Fixture Driver Length

Code

Type

Code

3.0 mm

DS030F

Ratchet (Short)

ISFDR10F

4.0 mm

DS040F

Ratchet (Long)

ISFDR15F

5.0 mm

DS050F

Contra Angle

ISFDH25SF

6.0 mm

DS060F

7.0 mm

DS070F

8.5 mm

DS085F

10.0 mm

DS100F

11.5 mm

DS115F

13.0 mm

DS130F

Code

PP10F

Code

HD1215

Code

DE01

Code

TW01

Code

MG00

Counter sink

Parallel Pin

Hex Driver Diameter

Code

Ø3.5

ISCS35F

Ø4.0

ISCS40F

Ø4.5

ISCS45F

Ø5.0

ISCS50F

Profile Tap

Drill Extension

Torque Ratchet Diameter

Code

Ø3.5

PTAP35F

Ø4.0

PTAP40F

Ø4.5

PTAP45F

Ø5.0

PTAP50F

Depth Gauge

IS Full Kit Components Surgical Drill

13 11.5 10 8.5 7

0 1.0

Point Lindemann Ø2.5

Initial Drill Ø2.2

Twist Drill Ø2.9

Twist Drill Ø3.4

Twist Drill Ø3.9

Twist Drill Ø4.4

>> * Function of Point Lindemann Drill ① Point Drill - Marking position of drilling(4~5mm Drilling) ② Side Cutting – Possible for Drilling in extraction hole and controlling path in drilling ※ All drills are designed 1.0mm longer than insertion length and Ø2.9 ~ Ø4.4 Twist Drills are desinged to prevent Over Drilling with Round Design on Drill Point(no need Stopper system, but recommended for D3~D4 bone)

Stopper

3.0mm

4.0mm

5.0mm

6.0mm

7.0mm

8.5mm

10.0mm 11.5mm 13.0mm

Length(mm)

4.0mm

5.0mm

6.0mm

7.0mm

8.0mm

9.5mm

11.0mm 12.5mm 14.0mm

Length

※ Length means actual length in drilling. Drilling is deeper 1.0mm than stopper length when stopper connected. Stopper is connected with drill by following signal.

Countersink C (Super Hard Bone) B (Hard Bone)

※ Used for IS Fixture, considering Cortical Bone Density, possible to use for IS-II in some case.

A (Soft Bone)

Ø3.5

Ø4.0

Ø4.5

Ø5.0

he depth controlling of countersink drilling is up to patient’s bone T density. In case that patient’s bone density is hard bone, depth is B line, bone density is soft bone, depth is A line. In case that bone density is super hard bone, C line is recommended.

Profile Tap Used for IS-II, IS-II active Fixture, effective for getting initial stability by tapping cortical bone. >>

>> easy tapping with four blades when using contra angle. 10mm Fixture 식립 시 8.5mm

7mm Ø3.5

Ø4.0

Ø4.5

Ø5.0

※ Tapping on cortical bone for upper part of Fixture. Drilling until Laser Marking Line on the upper part of Tap.<RPM 50, Torque 50>

IS-II active Drilling Sequence IS-II active Fixture Ø3.5 X 10mm (D1/D2 bone) Point Lindemann Ø2.5

Initial Drill Ø2.2

Twist Drill Ø2.9

* 1200 rpm / 30~45N.cm Profile Tap : 50rpm / 50 Torque

Profile Tap Ø3.5

D1 10mm

Tip Length 1 mm

※ If bone is soft, only 10mm drilling with Ø 2.5 Lindemann drill

IS-II active Fixture Ø4.0 X 10mm (D1/D2 bone) Point Lindemann Ø2.5

Initial Drill Ø2.2

Twist Drill Ø2.9

Twist Drill Ø3.4

Profile Tap Ø4.0

D1 10mm

Tip Length 1 mm

※ If bone is soft, only 10mm drilling with Ø2.9 Twist drill

IS-II active Fixture Ø4.5 X 10mm (D1/D2 bone) Point Lindemann Ø2.5

Initial Drill Ø2.2

Twist Drill Ø2.9

Twist Drill Ø3.4

Twist Drill Ø3.9

Profile Tap Ø4.5

D1 10mm

Tip Length 1 mm

※ If bone is soft, only 10mm drilling with Ø3.4 Twist drill

IS-II active Fixture Ø5.0 X 10mm (D1/D2 bone) Point Lindemann Ø2.5

Initial Drill Ø2.2

Twist Drill Ø2.9

Twist Drill Ø3.4

Twist Drill Ø3.9

Twist Drill Ø4.4

Profile Tap Ø5.0

D1 10mm Tip Length 1 mm

※ If bone is soft, only 10mm drilling with Ø3.9 Twist drill

2012.09.20 Ver.1