Farm Machinery December 2022

Tractors

*Used* John Deere 5085 GN 4wd 17 reg

*Used* Deutz 6165.4, 67 reg, rc shift, low hours £54,000

*Used* Deutz 6180,16 reg, FL, front pto £55,000

*Used* Deutz 7250,16 reg, FL, front pto, 3500hrs................................................................£75,000

*Used* Deutz 6215TTV 18 reg, 3000hrs, full spec POA

*Used* John Deere 7930, ILS, 40k, autopower, air, autotrac ready

*Used* John Deere 6155R 50k, auto quad, very nice tractor, 1500 hours

*Used* John Deere 6170R 14 reg, 50k, 6,000 hrs

*Used* Ford 7810 series 3 air con H reg, 7600 hrs, *Used* John Deere 7920 ILS, 40k, auto power £44,000

Mowers

*Used* McHale R3100 mower conditioner, VGC

*Used* Claas 3050 moco, spares or repairs

Cultivators

*Used* Kverneland CLC, fair condition, rear crumbler

Baling

*Used* John Deere 582 round baler, 06 £8,750

*Used* John Deere 359 square baler

*Used* Mchale V660 round baler

*Used* John Deere 854 round baler £10,000

Machinery

*Used* Maschio Accord Power Harrow Drill Combination

*Used* Kuhn Accord drill power harrow combination

*New* Ritchie 6m hydraulic folding harrows £2,950

*Used* 6 row Optima maize drill £5,000

*Used* Shelbourne Reynolds HD767 hedgecutter, forward reach

*Used* Grimme KS5400 F/Rear mounted potato topper, 6 row, 2019

*Used* Set Simba 2B discs 4m, hydraulic fold

*Used* Grimme bedformer £5,500

GREENCROP IRRIGATION

NC ENGINEERING; NEW – X DEMO - HIRE

MACHINERY

From £750

Joskin TR270 Topper £1,350 Votex, Wessex, Teagle 8’ & 9’ Toppers

From £450

Nicolson PC1800 Paddock Cleaner £4,750

Hardi Sprayer, Mounted. Choice of 3 £Call

Browns Post Banger £1,950

Lucas Castor 30r Square Bale Chopper, Trailed. As New £POA

GRIMME POTATO EQUIPMENT; DESTONER, PLANTER, HARVESTER. Telehandler Attachments

North & West Kent:

Trevor Sacree: 07966 338676

Romney Marsh & East Sussex: Jethro Murdoch: 07971 781285

East Kent: Steve Day: 07885 708177 West Sussex: Vinnie Copper: 07884 010511 Surrey: Alecco Galiotzakis: 07580 121424

Allis Chalmers Model B Bow axle

£775 No VAT

Amazone Centaur 3001 cultivator, Yr. 2006 £4,995

Amazone ZAM2200 SBS ferti-spreaders Y08 choice of 2 £2,000 each

Bomford B54 power plus hedge cutter

Browns 3 leg sub-soiler VGC

£4,950

£2,650

Claas Liner 350S single rotor rake £2,250

Claas Volto 770 6 rotor tedder

Conquip tipping skips choice

£4,450

£200 each

Dowdeswell DP100S 5 furrow plough £1,995

Fella TH540D hydro 4 star tedder, VGC £3,250

Full set of grass wheels and tyres to fit NH T5 VGC ............. £1,750

Galuchio 6mtr press c/w carrier tine kit .............................. £4,950

Gard 5.5 mtr folding discs choice of two £3,995 each

Honda Foreman quad bike ‘64 plate £3,995

Kongskilde Delta 4mtr cultivator 9 leg ................................ £3,750

KRM 4 mtr drill combo ....................................................... £4,500

Krone KWT 10.50/8×7 Tedder trailed yr. 2003 £4,000

Kuhn FC303 trailed mower conditioner £5,750

Kuhn FC283 mower/conditioner Y04 ................................. £4,250

LE mounted bale wrapper ....................................................... £895

Malone vertical log splitters in stock £CALL McHale 998 bale wrapper year 2000 c/w round bale kit. Choice of 2............................................................................. POA

Opico Maschio Aquila 5mtr power harrow 2013 £10,750

Opico Maschio Aquila 5mtr power harrow 2015 £11,750 Perkins 6.354 powered irrigation pumps. Choice of 8 ............... POA

SAM 24mtr self propelled sprayer ........................................ £4,250

Vaderstad Carrier 650 £10,250

Vicon Fanex 523 4 rotor tedder .......................................... £3,400

Vogel & Noot 4mtr hyd fold Terramat .................................... £2750

Warwick 14T trailers, choice of 4 POA Warwick 10T dump trailer, 1997 £2,250

Welgar AP530 rough paintwork but usable .......................... £3,450

FRONT AXLE SUSPENSION, CAB SUSPENSION, AIR SEAT, FRONT LINKAGE, CONTINUOUSLY VARIABLE, MID MOUNT VALVES, PART LEATHER SEAT, GUIDANCE READY, POWER BEYOND, SPOOL VALVE BUTTONS ON FENDER, FRONT TYRES 540/65X28 0%, REAR TYRES 650/65X38 0%. £47,500 2010 NEW HOLLAND T7050, 7198 HOURS, 195 HP, 50 KPH, AIR BRAKES, FRONT AXLE SUSPENSION, CAB SUSPENSION, AIR CONDITIONING, FULL POWER SHIFT, EXHAUST BRAKE, IMMOBILISER, LIGHT KIT, 4 ELECTRIC SPOOLS, NO ADBLUE, FRONT TYRES 540/65X30 60% BKT, REAR TYRES 650/65X42 40% BKT £33,000

2018 NEW HOLLAND T7.190, 8951 HOURS, 50 KPH, AIR BRAKES, FRONT AXLE SUSPENSION, CAB SUSPENSION, AIR SEAT, FRONT LINKAGE AND PTO, AIR CONDITIONING, CONTINUOUSLY VARIABLE, HALF LEATHER SEAT, 3 SPEED PTO, EXHAUST BRAKE, LED LIGHT KIT, ELECTRIC MIRRORS, SUNROOF, POWER BEYOND, FRONT TYRES 540/65X28 10%, REAR TYRES 650/65X38 10% £37,500

MASSEY FERGUSON FOR SALE :

2015 MASSEY FERGUSON 7718 DYNA 6, 6939 HOURS, 180 HP, FRONT AXLE SUSPENSION, CAB SUSPENSION, FRONT LINKAGE, 1 FRONT SERVICE, 4 SPOOL VALVES, FRONT TYRES 14.9X28 30%, REAR TYRES 18.4X38 50% FIRESTONE, VERY TIDY A CREDIT TO THE DRIVER £39,000

2016 MASSEY FERGUSON 7722 DYNA 6, 9301 HOURS, 50 KPH, AIR BRAKES, FRONT AXLE SUSPENSION, CAB SUSPENSION, FRONT LINKAGE, AIR CONDITIONING, FULL POWER SHIFT, FRONT SERVICE, 4 ELECTRIC SPOOLS, POWER BEYOND, CONTROL CENTRE DISPLAY, WORK LIGHTS, ELECTRIC MIRRORS, FRONT TYRES 600/60X30 50% MICHELIN, REAR TYRES 710/60X42 45% MICHELIN £37,000

JCB FOR SALE : 2013 JCB JS130, 9171 HOURS, SERIAL NUMBER JCBJS13EP02133667 WITH QUICKE HITCH, CHECK VALVES, 30% UNDERCARRIAGE £23,000 CLAAS FOR SALE : 2011 CLAAS 630, 5301 HOURS, 145 HP, 40 KPH, CAB SUSPENSION, FRONT LINKAGE, AIR CONDITIONING, FULL POWER SHIFT, FRONT TYRES 420/85X28 70% BKT, REAR TYRES 520/85X38 70% BKT £26,500 WANTED : KUHN MERGERS

With over twenty five years’ experience E W McTrab provides readers with reviews and tips on the purchase of various pieces of machinery.

SCOUTING OUT A LOWLANDER

Back in 1991, G T Bunning and Sons launched the first of its Lowlander vertical rear shredding auger muck spreaders. Some 30 years on, the Lowlander series has evolved to encompass four ‘ranges’; Farmstar, HD mk2, Widebody and the ‘small to medium’ size Mk4 models. It is the latter we take a look at here.

BUNNING

LOWLANDER MK 4 150

COMING UP NEXT MONTH: TOOL ROUND UP

BUNNING

LOWLANDER MK 4 150

Year: 2018

Condition: Good. Ready for work

Comment: Ex-contractor spreader that will have had several thousand tonnes pass through its beaters. Well maintained and ready for work examples make good choice for farm work. Smaller 120 more popular so similar money.

Price point: £31,350

Lowlander vertical shredding auger muck spreaders follow a design format that employs a moving floor that feeds material to the rear augers that shred and spread it. Simple. The ‘problem’ of course is that there is no such thing as ‘typical’ muck, those that use these machines on a contract basis typically spreading everything from hugely variable FYM, semi-solid slurries right through to industrial by-products to include sticky powdery materials such as gypsum. Each of these presents a different spreading challenge, but most expect one machine to spread the lot.

A further demand is consistent spreading accuracy over a wider spread width to help reduce in-field trafficking. Add the ever-growing demand for high rates of productivity and it should come as no surprise that these muck spreaders have evolved. Add the subtle tweaks and developments, to include the option of fitting of load cells, and it follows there is more to securing a pre-owned spreader than just checking it is mechanically sound.

The development of Lowlander muck spreaders reflects the evolution in the approach to dealing with what we generically call muck in terms of both throughput and accuracy. A spreader will obviously need to spread muck as economically as possible and do so within a relatively short time frame but also do this with recordable accuracy.

For many, the best way will still be to get muck spread by a trusted contractor. The right outfit will be able to get the job done quickly, spread accurately and do the job cost effectively. The snag is contractors are increasingly tied up with other work when the spreading window opens up. This is when being able to do the job yourself has its attractions.

Year: 2019

Condition: Above average

Comment: Ex-contractor spreader with load cells and full in-cab controls. Dealer prepared and serviced examples are rare used finds but expect to pay a premium for high spec, ex-demo and late model examples.

Price point: £38,350

BUNNING

LOWLANDER MK 4 150

Year: 2016

Condition: Excellent

Comment: Air brake model with wide angle pto, rear hitch and rear strobe lights. Solid drawbar with bolt-on hitch.

Price point: £16,000 - £20,000

When considering buying a pre-owned muck spreader, do not assume a private or auction buy will be the cheapest option. Check dealer and re-furbished prices first and, as always, look at the cost of a new model built to your specification. Bunning Lowlander models may carry the same name but improved performance and spreading accuracy has come as part of the machine’s evolution. As the true

BUNNING

LOWLANDER MK 4 150

Year: 2011

Condition: Good. Ready for work

Comment: Fitted with spinning deck attachment to spread materials such as chicken muck, biomass etc. Decade old machines like this will retail for between £13,000 and £18,0000.

Price point: £17,850

<< value of what is generically called muck looks to set to increase, in line with the greater emphasis placed upon soil health, it follows that optimising its application will become an increasing priority.

WHAT TO LOOK FOR

What follows is a broad outline. A point to note is that replacement parts remain available for all Bunning Lowlander models, regardless of age. Further, the factory supports specialists, to include SAS Agri in Norfolk and Wardmans of Matlock, who can offer used buyers

BUNNING

LOWLANDER MK 4 150

Year: 2014

Condition: Refurbished

Comment: Refurbished spreaders make a good choice for farm users as key wearing parts will have been renewed. Good choice if new model cannot be justified. Expect to pay between £29,000 for decent a used model to £35,000 for one that has been given specialist TLC.

Price point: £32,500

refurbished models.

It can be difficult to spot areas that may need attention on a used buy, the more so on a machine that has not been really well cleaned. An initial look over the machine will typically provide enough of a clue to see if the spreader is worth a closer look but be wary of a private or auction buy that looks as if it has just finished work and not had the benefit of a bit of pre-sale TLC.

DRAWBAR, PTO AND DRIVELINE

Bunning switched from a weld on hitch tongue to a bolt-on design in around 2014. On older models, factor in the cost of welding on a replacement tongue if the ring is worn. This work must be done properly. Alternative hitch designs may be fitted, but most models are sold to allow attachment via a tractor pick-up hitch. All models are designed to be towed at transport speeds that do not exceed of 30kph/20mph.

A sprung drawbar was offered as an option and will considerably improve working with the machine both in the field and in transport and are the models to go for if your budget allows. These drawbars are robust but look for play in both the front and rear pivot bushes, the grease point at the spring end sometimes getting overlooked.

Pick-up hitch ring and pto can tell you a great deal about the spreader and its past care, although worn items are of course to be expected on a well-used machine. Take time to really take a close look at the pto and see if it can be refurbished or will need replacing. Bolt-on hitch makes replacement easy but a new one will cost £250 plus.

The clamps that secure the spring leaves at the pivot end must be tight and also look for fractured or broken leaf springs, the latter proving more liable to break if these clamps have worn loose. Ensure the U-bolts that attach the spring leaves to the drawbar are tight with no evidence of them having loosened; worn paint is a tell-tale sign that further investigation is needed.

A further option is a Walterscheid wide angle pto to these models, with a choice of 21 or less common six splines for 1,000 and

A row of fresh shear bolts and floor chain spanner will be a rare find on a used buy. When replacing shear bolts, make sure the correct M10x60 size and 6.8 mild steel grade are used. It pays to periodically replace these bolts in service.

540rpm. As an option, a torque limiting shaft can be specified, this incorporating a slip clutch at the spreader end that will need periodic servicing and setting so it will ‘slip’ at the correct torque.

If possible, couple the shaft to a tractor as this can make it easier to check for play in the CV joints. Wide angle journal kits on a 1,000rpm pto cost around £74. If the pto does not slide freely, budget to replace the entire unit at around £835. Similarly ensure the pto is of the correct length for your tractor.

It follows that the pto guards will need to be in good condition, any missing elements needing to be replaced before the spreader is put to work. Again, it is easy to overlook the cost of putting this right. The guard safety chains also need to be in place and fitted when hitched up. Details of how to achieve this are outlined in the spreader operator manual. A pto stowage hook is fitted as standard.

Drive from the pto to the rear gearbox is via a split telescopic shaft with UJs at both ends. Support bearings are fitted at the front and middle. It follows that there can be wear in all these points, so check to include the overrun clutch at the rear gearbox end.

There is just one shear bolt fitted on a Bunning spreader driveline and this is located at the spreader end of the pto shaft. From new, a few spare bolts would have been attached to the holder near the floor speed control, and these should be a M10x60 size and 6.8 mild steel grade. These items are cheap and can save expensive damage to the auger driveline.

FLOOR CHAIN AND GEARBOX

Bunning use a twin chain and slat moving floor, with a pair of front mounted bolts to adjust the chain tension. The chain gap to the body should be even on both sides. Chain wear can be in part worked out by

Front pivot point of the sprung drawbar option needs regular greasing, so check for signs of wear and the need for attention. Note ‘black’ load cell above the pivot. A used buy that is ‘load cell’ ready can have the system retrofitted but check before making assumptions.

taking a look to see how much adjustment remains, removing a single link, and renewing the joiner link, enabling some slack to be taken out. The moving door has changed in various detail ways over the years. Larger profile S355 High Tensile 80mm x 40mm x 4mm box slats fitted from 2010 improve wear and strength plus helping to ensure the feed of more difficult materials, such as gypsum, is improved. The chain and related drive are robust, but check the chain driving Gypsy sprocket wheels for wear and that their related groove scrapers are in good order. The latter needs to be adjusted to prevent material building up in the central wheel channel. These are easily renewed.

Sprung drawbars make a big difference to how the spreaders tow in both transport and work and will improve ride comfort for operators. Inspect this area carefully, checking for loose clamps, broken springs and worn pivots. Rear pivot grease point is sometimes overlooked.

The floor and floor chain and slats should be inspected from above and below, for pretty obvious reasons. From 2010, the floor slats were upgraded from basic channel to S355 High Tensile 80mm x 40mm x 4mm steel box that is much tougher and does a better job in tricky materials. From 2014 the slat tabs linking the slats to the chain

With floor chains, you need to check every slat and link, simply pulling the chain up from the floor telling you little more than its tension. You need to look at the entire chain and slat run. It should be easy enough to spot the difference between worn and really worn items. Before assuming worn chains and sprockets will resolve all your floor worries, check all the related bearings and look also for wear channel where the chains run.

The floor bed ACM bushes are designed to be greased and again their life expectancy is pretty much aligned to how much attention they have received. On a non-prepared used buy, just assume they need to be renewed. If you can ‘see’ wear in the bushes it is worth checking the bush carrier and shaft as well.

BED AND BODY

If the chain floor is worn it follows that the body and particularly the floor will be worn too. As these elements of the spreader are made from flat steel, welding in replacement sheet is possible but seek some advice as the job needs to be done correctly and ‘tub’ repairs do need good welding skills to prevent warping. The slats obviously need to run flush with the bed so ensure any repairs you spot on a used model have been done properly.

A point to note is that an ex-contractor machine may well show pretty high levels of wear, but this is not the same as suggesting

the spreader is worn out. A contractor will typically put more work through a spreader in a season than many farms will do over many years. It is balancing the work to wear ratio that is the key to securing the best used buy, a well-specified ex-contractor spreader that is worn but sound potentially making a better buy than a machine in good condition but not with the spec you want.

SHREDDING AUGERS, GEARBOX AND FLOOR DRIVE

The vertical shredding augers clearly work hard and pretty obviously will need a good looking over for damage. The key checks include a look for bent tooth carriers and worn rotor flights; the latter are heat treated boron steel from 2015 and are more resilient to wear and becoming deformed. The cutter points were upgraded to boron steel from 2013, as are all new replacements. Bolt on wearing parts are sold complete with new fasteners. The only way to really work out how worn the cutters are is to compare old with new, a point to consider if you are not over familiar with these models.

The blade paddles at the bottom of the shredding augers fix to the auger body via bolts. As with the cutter tips these wear items are integral to determining the spread width. Again, the easiest way to determine wear is to compare old with new. The auger flights will

Load cells will either work or not, problems usually relating to the wiring as opposed to the actual cells themselves. Although not over common a few years ago, weighing systems are a great management aid and can help promote spreading accuracy. Well worth having on a used buy. Note the floor speed control is set in the cab when the weighing system is fitted and is offered as an option on other models.

were increased in strength.

The bed floor adjusters are easy to get at and the shaft bushes can be looked over at the same time. It is worth having a look at the threads and nuts on the adjuster, gnarled and damaged items suggesting ham fisted servicing. Look for grease around the bushes.

also wear but damage is the main concern. If the auger flights are worn thin, it may be worth seeking advice; problems here are rare.

The upper shredding augers bearings are pretty easy to get at and not over costly to renew. They must be in good order for pretty obvious reasons. The bottom of the augers run on the gearbox driveshaft via a drive flange and rubber drive block. Budget to replace the latter as they help cushion the drive from shock loads and may have hardened with age. This is not a difficult job, but it can take time so budget for both parts and labour.

The shredding augers gearbox again needs to run with clean oil. A sight glass in the rear centre of the drive will show the oil level and give an idea of its cleanliness. If this part of the spreader has been cared for, the gears and related bearings are long lived. If the various seals, such as in the top of the gearbox, have become damaged or worn they will clearly let dirt, muck and water get in. This will contaminate the complete assembly if left unchecked.

Ideally, it pays to drop the gearbox oil to look at its condition, regular oil changes and good seals preventing expensive wear but sometimes getting overlooked when the previous owner knows they will be getting rid of the spreader. The gearbox casing can also suffer accident damage so look for cracks and

dings. If the paint on the gearbox sump plug still has factory paint on it, you need to ask a few questions!

The floor drive gearbox is well-sealed from muck but again needs to have had its oil changed regularly. It is hard to assess its condition on a used buy. If there is no oil showing in the sight gauge and the top breather in the casing is black and grimy it suggests something is amiss on the maintenance front. Also look for signs of weeping seals or leaks.

The hydraulic floor drive motor speed can be controlled via either a manual lever control mounted at the front of the spreader or electronically. The hydraulics on these spreaders are not known to give trouble, so the key check on a pre-owned buy is to run the floor and ensure the speed can be varied. A look for leaks is typically enough to spot problems but it is only when load is applied to the floor that you will find out if there >>

A grease nipple at the drive side of the floor chain gearbox should show signs of frequent grease gun attention. The hydraulic drive motor tends to be pretty bomb proof but look for signs of oil leaks. The gearbox itself is not a problem area but look for weeping seals and make sure the oil inside is clean.

Retail parts prices – December 2020

Description Price (ex VAT)

Floor slat £23.21

Reversible cutter (125mm) £6.63

Bottom blade £22.45

ACM bush £30.48

Mk 4 Lowlander models benefit from a single piece gearbox that is bolted together. This design is tougher than the three-box system employed on earlier models. Check this area for oil leaks and damage and also take a good look along the entire drive line. The drive support bearings do wear and should be renewed as soon as any play is detected.

WHAT’S USED

G T BUNNING AGRICULTURAL ENGINEERS

LOWLANDER - KEY DEVELOPMENTS

1991: Original Lowlander launched

1996: Lowlander Mk2. Bottom was increased from 92 to 112” and deck lowered.

2003: Lowlander Mk3. Improved access to the 3 individual auger gearboxes

2005: Lowlander Mk 4 launched. New wider body of 1500mm, previous marks all 1435mm. One- piece oil-immersed auger drive gearbox with larger heat-treated gears and shafts in place of three individual gearboxes. A key development in boosting both reliability and longevity. Single drawbar in place of earlier ‘A’ frame to improve turn radius and ease access to awkward gateways.

2010: Floor slats upgraded from channel to S355 High Tensile 80 x 40 x 4 mm Box

2013: Heat treated boron steel used for cutter points and bottom paddles.

Mid 2014: New design slat tab. Increased strength between slat and chain with improved longevity

2015: Heat treated boron steel vertical auger flights. Twice the strength of mild steel to resist deformation and wear.

is a problem. A dealer will do a pressure check to ensure all is well so consider this when buying a machine privately or at auction.

GUILLOTINE SLURRY DOOR

As simple as this element of the spreaders is, it is also critical to the machine’s overall running so check carefully. The door itself needs to be able to seal the spreader to prevent material falling out in transit, and it should move up and down the runners smoothly. Physical damage is possible, so look for repairs. There are two lift rams fitted. On spreaders stored outside with the ram door raised, check the chrome of the rams is not rusted.

BRAKES AND RUNNING GEAR

Lowlander spreaders are not built for high transport speeds and are fitted with hydraulically activated wheel brakes. How the brakes perform, and their condition, will relate to how the spreader has been worked. Crawl under the spreader and take a look, a smear of grease around the lube point suggesting someone has taken a bit of care to ensure the system has not seized up. The brakes are designed to help pin a fully laden spreader down in the field as well as the road, a point to consider if the machine is to be used

on steep, challenging ground.

Wheel bearings can be checked by giving a wheel a good wobble, but it is best to assume the axle hubs will benefit from fettling to check the brake linings and bearings on a non-prepared buy.

SUMMARY

Buying a pre-owned muck spreader can be a frustrating job, with private and auction buys sometimes attracting prices that may not be in line with the machines intended future use. A dealer or specialist supplier will typically offer a spreader that is presented in good order. The trick is to buy a spreader that is up to the work you will put its way. A well-worn ex-contractor machine, serviced and prepared for work, can make a good buy to spread a farm load of muck a season. Expect the same spreader to deliver front line performance in all-out contracting work and you will probably discover why it was sold on.

Prices for older Lowlander Mk4 spreaders – earlier models are now getting a bit long in the tooth so are harder to price – will perhaps hover around £10,000 to £11,000 for sound, dealer prepared Lowlander 75, 85, 90,105 models. These have nominal capacities of 9.5, 10, 11.6 and 12.6 tonnes, regional

It is obviously easier to check a machine that is spotless. Where possible, comparing new and worn teeth and blades will help establish if they will need renewing. It is a false economy to run the boron steel blades and teeth right down as this will impact on the quality of the spread and also lead to more wear on the auger flights. The latter are also made from heat treated boron steel (from 2015), this development further enhancing the life of these already robust spreaders.

popularity suggesting similar prices for each.

Larger Lowlander Mk 4 120 and 150 models with nominal 14t and 16.6 tonne capacities are typically ex-contractor models but do not let this put you off as these machines will typically have been well-cared for, with greater attention paid to routine care. Just look for excessive wear. Sound examples will be priced from around £15,000 but expect to pay near £25,000 for a spreader that is worn but ready for work.

You will pay more in stages for later models, with sound 2010 spreaders in really decent order seldom selling for less than £20,000, 2015 models commanding prices

near £30,000 but again for machines that are in really good shape. A really worn spreader is just that, so be wary if a younger machine is offered at a tempting price.

In-cab floor speed controls will add perhaps £500 to the sticker price of a dealer buy, with load cell machines currently proving a rarer used buy but commanding a premium of perhaps £2,000. If a used buy is ‘load cell ready’ check the cost of fitting it. Well worth having where accuracy, work rate and tonnage spread is a requirement. With thanks to Chris Duce, Bunning Agricultural Engineers and Northamptonshire Agricultural Contractors, Pete and Rich Burbage.

Mounted on the offside front frame, the spreaders serial number plate lists date of manufacture, drawbar weight and other details. It is worth wiping it clean to check the details match what you expect. GT Bunning will be able to identify the spreader from its serial number and supply any parts needed, even on machines made over three decades ago.

Designed to spread material to the sides of the spreader, the bottom blades need to protude to deliver the expected spread pattern. Note the floor sits above the bottom of the augers, this design tweak helping to prevent blockages and improve the feed of difficult materials such as paper waste and gypsum.

Hydraulic brakes do need a little TLC to include routine, but moderate, greasing of the cam drive. Whilst looking under the machine, check for damage to the inner wheel rims and look for cracks in the tyre wall. These spreaders are not designed for fast road work, the more so when fully loaded.

It is hard to check a well-worn spreader, but a look at a new or refurbished example will illustrate how the augers are designed to shred material, the adjustment of the slurry gate impacting upon how it is fed and shred. To get the best spread, subtle adjustments will need to be made in the field and checked

Early Lowlander Mk 4. Offering an even spread, these spreaders enable precultivated stubbles to be treated to substantial amounts of manure without compromising following cultivation. Spreaders used on farm may not work as hard as examples employed by contractors, the latter typically selling their machines on when they will have plenty of farm usage life remaining.

to ensure spread consistency.

WHAT’S NEW

NEW TWIN-AUGER 4-CYLINDER SELF-PROPELLED VARIANT

BvL has extended its series of self-propelled mixer wagons to include a compact four-cylinder version, the V-MIX Drive Maximus Plus 2S, with a larger container volume.

The development of self-propelled mixer wagons at Bernard van Lengerich Maschinenfabrik GmbH & Co. KG (BvL) in Emsbüren goes all the way back to the 1990s. Since then, the appearance and features of the machines have changed substantially. Currently, the V-MIX Drive Maximus Plus, is available in single and double auger variants with 4-cylinder and 6-cylinder engines, respectively.

The new V-MIX Drive Maximus Plus 2S combines the base of the single auger self-propelled machine but with the container of the double auger machine. The result is a robust machine with a large container volume of 19m3 or 21m3, but with a smaller engine compared to the standard double auger self-propelled machine. The 174hp four-cylinder machine is therefore in the middle price range between the two previous BvL self-propelled machines.

The new V-MIX Drive series is ideal for use as a farmyard machine, but can be registered for road use and is suitable for short distances to remote barns or other areas of the farm. Since the machine is equipped with a separate transmission, the mixing process with both augers is no problem despite the smaller engine, and cleaning is also facilitated by very high rpm.

The time proven and long lasting structure roller in this mixer wagon also ensures removal of feed without damage to the physical structure of the mix. Other BvL features, such as automatic remixing or manoeuvring with the crawler gear function, are also

standard equipment.

The machine is also available with new extra options, such as additional storage capacities and loading functions, an additional LED light unit over the cab, or virtually panoramic visibility due to the new Bird View camera system.

This high-performance handler eclipses rivals with its 173hp JCB DieselMAX engine output, 50kph DualTech VT transmission, 22% greater dynamic tractive effort and 14% greater hydraulic flow at 160-litre/min.

All of which adds up to a significant increase in productivity potential for large farming enterprises and contracting businesses.

KUBOTA LAUNCHES ENTRYLEVEL COMPACT TRACTOR

Kubota (UK) Ltd has introduced the EK1 series compact tractor to its line-up. The 24hp, four-wheel drive EK1-261 model sits at the foot of its compact tractor portfolio, representing a costeffective choice for smallholders.

Manufactured by Escorts-Kubota, the EK1 uses a three-cylinder diesel engine that meets EU Stage V emissions without the need for a diesel particulate filter (DPF). Drive is transmitted via dry plate clutch through a nine-forward three-reverse, constant mesh transmission.

The tractor’s rear-mounted three-point linkage offers a 750kg lift capacity, while a rear PTO provides 540 and 540E speeds for powered implements such as a flail mower, pasture topper and finishing mower. One double-acting hydraulic spool valve is fitted,

and operates with an open centre hydraulic system.

Despite the straightforward approach, the small details have not been over-looked, and the EK1 offers a charging socket and mobile phone holder, in addition to a weight-adjustable, mechanical suspension seat and foldable ROPS frame. The ability to temporarily fold the ROPS frame complements the tractor’s physical dimensions, helping access into low-height buildings for the 2670mm long, 1035mm wide, EK1 tractor.

The EK1-261 includes a five-year Kubota Care warranty as standard, and its retail price starts from £11,036+VAT. Those seeking additional versatility can add an optional front-end loader, or choose turf tyres or industrial tyres.

WORKING WITH A COMPACT SIZE

The new Terrain GX4s from Corvus Off-Road Vehicles is the perfect example of UTVs working with a more compact size while maintaining comfort, power and the best equipment. Its powerful 570 EFI petrol engine and its 4×4 differential lock system, provide the Terrain GX4s with unmatched power.

The compact dimensions of the Terrain GX4s greatly increase this UTV’s versatility. With a width of 144.9cm, it’s perfect for service tasks, but it can also be used in woodland areas. A perfect size that goes hand in hand with a maximum total load capacity of 440 kg –a leader in its class.

The Terrain GX4s is a perfect example of a vehicle with unadulterated Off-Road DNA. Its powerful 570 EFI petrol engine and its 4×4 differential lock system, provide the Terrain GX4s with unmatched power. An authentic and ideally sized all-terrain vehicle, the new Terrain GX4s it is an agile and easy-to-drive UTV. With a ground clearance of 242mm, and a turning radius of 2.99m, the GX4s is more than able to negotiate all types of terrain.

One of the strengths of this UTV is the ratio of dimensions of the cabin. In short, its cabin is wide and spacious. In addition, its ergonomic and intuitive driving position offers the worker surprising comfort and a good driving experience that translate into comfort throughout the working day.

As is the case with all the vehicles in the Corvus Off-Road Vehicles family, maintaining the Terrain GX4s is an extremely simple task. To gain access to the engine assembly, the oil filters, air filters, and the

CVT belt, all you need to do is remove the cargo box.

Corvus Off-Road Vehicles’ s new gasoline UTV joins the other models in the Terrain family to make a perfect trio of off-road market-leading work vehicles.

With the new Terrain EX4, an all-electric UTV, Corvus Off-Road Vehicles take UTV efficiency and performance to the next level. Its silent operation allows pleasant driving very useful for the working day, since the vehicle allows you to work at any time of the day without noise.

This UTV is a powerful and robust 4×4 diesel vehicle, with great storage and cargo capacity, which is fully capable of giving its best in all types of terrain and work. The Terrain DX4 model has a naturally aspirated diesel engine YANMAR of 993 cc and three cylinders in line, with which ensures it reaches a power of 24hp.

NEW HIGH CAPACITY COMPACT TANKER

Hi-Spec Engineering will be back at LAMMA in January exhibiting a range of products, including a new addition to their popular and well proven vacuum tanker range.

The new Hi-Spec TS-R tanker is available in a range of capacities from 2,000 up to 4,000 gallons. The tanker body is fully supported and is carried on a commercial tandem-axle, fitted with 710/50R26.5 tyres with semi-recessed mudguards.

The combination of narrower width but lower rolling resistance tyres to keep soil compaction to a minimum and the semi-recessed mudguard design has the benefit that overall width and height are reduced, making the TS-R a more nimble tanker and ideal for use where operating space is restricted.

As standard, the Hi-Spec TS-R is fitted with a sprung drawbar with swivel hitch and the barrel is made from 6mm British steel and incorporates internal baffles and anti-implosion rings. Also standard is a powerful Jurop pump and the TS-R can be specified with a wide range of filling options.

Spreading options for the TS-R include the Hi-Spec Trailing Shoe applicator, which is available in working widths of 7.5, 9.0 and 10.5 metres. Alternatively there is the 7.5 metre wide Hi-Spec Dribble

Bar, which folds down to just 2.55 metres for transport.

In addition, also on display will be a Hi-Spec SA-R (single axle recessed) tanker. Capacities on the 6-model SA-R models are from 1,350 gallons up to 3,000 gallons. All SA-R models are fitted with commercial brakes and the show model is on 750/60 R30.5 Alliance 181D tyres. The tanker body is built from 6mm thick British steel, is fitted with a Jurop vacuum pump and incorporates internal implosion rings. The show model will also be fitted with a Vogelsang Blackbird trailing shoe applicator.

Scott Worsley

Founder of Kirkland UK

SEE & SPRAYTM COMES TO EUROPE

At this year’s SIMA, John Deere presented See & SprayTM for the first time on its European sprayers built in Horst (Netherlands). Following the introduction of See & SprayTM Select and Ultimate in the USA, John Deere is taking the next important step towards precise crop protection.

The See & SprayTM system for Europe is based on the See & SprayTM Select technology already introduced in the USA. It uses camera technology to detect colour differences in the field. The cameras and other hardware components are integrated directly into the boom or chassis of the machine. One camera is mounted per metre of working width, which captures green plants at lightning speed. Processors handle the images and the nozzles are triggered individually for spot treatment. The green detection on the field soil enables a targeted application of pre-emergence herbicides. All weeds that are also visible to the naked eye are detected by the cameras.

See & SprayTM is not only suitable for pre-emergence treatment – it can also be

used in row crops after emergence. The crop rows can be extracted by the sprayer and thus the weeds between the rows can be targeted and treated. This application is possible at all stages and for all row crops before the canopy closes, allowing the customer an additional treatment for See & SprayTM in the growing crop.

TESTED UNDER DIFFERENT CONDITIONS

See & SprayTM has already been tested on about 120,000 hectares worldwide. The success in application is comparable to broadcast spray, but with a saving of up to two thirds of consumption. First tests in Europe showed the same results. In addition, the system could be optimised to adapt See & SprayTM to European conditions.

SEE & SPRAY TM SUPPORTS AGRONOMIC DECISIONS

The See & SprayTM system can document the application of herbicides using the in-cab Gen 4 display. In this context the display creates a coverage map with information on where the herbicide

was applied. The documentation can be transferred via JDLinkTM to the John Deere Operations Center. Among other things, this would allow sub-areas with increased weed pressure to be identified and future measures to be optimised.

AVAILABILITY AND MACHINE

See & SprayTM Select is already sold with the self-propelled sprayers in the USA. These machines will be the first on the market in Central Europe this year. From spring 2023 See & SprayTM will be available on a limited basis for the European R900i series trailed sprayers with 36m and 39m booms and will then be offered as an option for various John Deere sprayers from Horst in the future.

The following components are required for use on the R900i trailed sprayers:

• The PowrSpray System

• Pressure Recircualtion Booms

• TerrainCommandTM Pro

• Individual Nozzle Control

• The agricultural management system solution JDLinkTM

• The Gen 4 Display

• StarFireTM 7000 Receiver

LAUNCH OF THE NEW TELEHANDLER

MLT 850 NEWAG XL

Manitou Group is launching its new NewAg XL telehandler model. The MLT 850-145 V+ telehandler is the fourth model in the NewAg XL range, following the launch of the MLT 841, 1041 and 961.

With a load capacity of five tons and a working height of 7.6 meters, this new model completes the existing range to meet the needs of large farms and cooperatives, but also the food industry and the recycling sector. Designed for very intensive use, in particular the loading of bulk cargo, cereals, wood chips and silage, the MLT 850 is also perfect for handling straw bales and big bags.

With a five ton capacity, high-capacity attachments and a high hydraulic working speed, the MLT 850 offers the best work rate in its class. This model offers more than 600 Nm of torque, with a pull force of more than 9,160 daN (+20% compared to the competition). The high movement speed provided by the 200 l/ min LSU pump is complemented by a bucket breakout force of over 8,670 daN. Combined with a high-capacity tank, the user can

work with the best flow rate all day long without interruption. To optimise efficiency, the HighView camera installed on the boom head makes it possible to monitor the trailer fill level directly from the cab (+10% productivity). The M-Vario Plus continuous variable transmission allows the machine’s behaviour to be adjusted to suit every need, thanks to the comfort and dynamic modes.

Available now, the MLT 850 (Stage V) and MLT-X 850 (Stage IIIA) telehandlers will be delivered to Manitou dealerships from the second quarter of 2023 in Europe and worldwide.

Peter Love, the joint creator of Tractor & Machinery and Classic Tractor, gives Farm Machinery his views on this month’s events.

If you have a story, or an event, please do get in touch: peterlove@madasafish.com, TEL: 01323 833125

Well the season has finally come to a close after a very, very successful sales year for all auctioneering companies throughout the UK and certainly in North America. Prices in mainland Europe have not seen many significant increases.

We have, however, still seen many new records created for classic tractors in the UK, however post Bexit new import and export regulations are affecting our larger tractor sale houses

It is with great sadness, that we announce the passing of Arthur Battelle. Known to many through various stages of his life particularly in the 1960s from his time as a Ford tractor demonstrator. He came to the Kent County Show in 1966 and demonstrated the radio control Ford 2000 and was the ‘everyman’ on the front of the Fordson Super Dexta sales leaflet.

Later he distributed Schindler axles for four-wheel drive conversions and created the little known Clydesdale tractor based on a Ford skid unit and there are one or two survivors of these tractors still about. Later

and this is making life difficult for them. It’s stopping many mainland traders wanting to sell their wares to the UK now even if we need more trade not less. One has to remember before Brexit the UK was the largest trader in secondhand tractors and agricultural machinery in Europe. This is something that the Governments trade and industry secretary needs to be looking at right now as it is not helping our economy whatsoever.

ARTHUR BATTELLE 1925-2022

he created the pioneering The Fordson Magazine.

He then went on to write a raft of books and memoirs which have been very successful and make good reading today, he even tried his hand at a novel. Arthur was also part of the creation of Old 20 Parts Co which today is run by his son Nick and grandson. He always lived his life the way he wished and passed peacefully in his sleep at the age of 97.

His legacy is carried on by Nick who provides excellent Ford tractor film shows thanks to the unique archive Arthur kept together so well.

STOCKING FILLER?

Just released by Steve White’s Primetime Video is this 70 minute DVD called Plant, Grow & Harvest priced at £15.95.

The programme features farming in the Fens around the fields of Lincolnshire, Cambridgeshire and Norfolk. As they grow peas, broccoli, brussel sprouts and root vegetables ready to be sold to customers around the UK.

The programme features a range of tractors in actions from John Deere: 6430, 6820, 6830, 6930, 6140, 7530, 7930 and 8430. New Holland:

T6020 and T7.270. Fendt: 720 and 724. JCB Fastrac 2140 and 2155. They are using a range of equipment from ground preparation, planting, drilling and harvesting. The video also features four PMC 979-CT pea viners and a Tumboba self-propelled four-row sprout harvester and the excellent narration is done by Alan Stennett of course. Our correspondent says it will make an ideal Christmas present. Further details: 01205 750055.

CATERPILLAR COLLECTION ON THE MOVE

A ‘secret’ collection of eight classic Caterpillars with less than 70 hours on any of them has recently changed hands in the south east (in the latter-half of October 2022) having been purchased by the ever affable Kentish Mark Hellier a dealer/collector of some repute world-wide.

These eight 1980s classics were bought to be used in a groundwork pipe laying business but only two of the machines were ever used and they were all eventually mothballed until now!

They all run and look magnificent as they were when new in 1983. They include a brand new not used Caterpillar D8K which carries the later modifications to the engine, turbo, oil coolers etc and is an amazing sight highlighting what this tracklayer was like when new.

The ’baby’ D6D is a treat to behold as is the 977L crawler loader with its 190hp Cat 2236 turbocharged engine which is an eye opener. The 950

NORTHROP 5004

Following our report on the Biddenden Tractorfest in the November issue of Farm Machinery, the owner of the ultra rare Northrop 5004 four-wheel drive I mentioned Ross Douglas has been in touch. The tractor was lurking beside the Ford and Fordson Association tent at the time of the show.

They bought the tractor second hand from Gleesons from possibly Oxfordshire who ran the tractor in a maroon livery hence the paint has faded over time and is now showing through the original blue these days. While working for the Douglas family in Kent on groundwork with a front blade and such like, it was fitted with a rear winch to hoist anything out that got stuck, but they still have all the three-point linkage with the tractor today.

The Northrop came about through the merger of British Northrop and Chaseside in the early 1960s which led to the company diversifying into agricultural products. The under powered Northrop 5004 which was designed by Frank Thornton and Gilbert McIntosh uses the just introduced Ford Pre Force 5000 skid unit. It was offered with that horrible Ford SelectO-Speed (10-speed) transmission or the standard eight-speed unit which

The Caterpillar 235X excavator features the Cat 3306 195hp engine

The mighty Caterpillar D8K which carries all the later modifications which made these excellent tracklayers and known as the last of the conventional D8 line that goes back to the 30s.

loader carries the 3304 157hp engine and can load 2m of material at a time and the bucket has not been used at all! Another gem is the Caterpillar 955L loader which features the D330 130hp turbocharged engine.

The 235X excavator features the Cat 3306 195hp engine and has a boom height of 31ft and a vertical cutting depth of 15.5ft and needed a heavy lowloader to take it all away.

The loading of the equipment ready to move to its new home was undertaken by Mark Hellier’s metallic blue Scania outfit and another immaculate operator was brought in with K Drury & Sons, Etchingham, East Sussex (established in 1985). Their red machines are kept in totally immaculate order and were called on to take the heavier loads to their new destination. We thank Tom Drury for taking the pictures for Farm Machinery and Mark for allowing us to tell some of the story here.

was really a seven-speed unit. The axles were similar to what was used in the Chaseside loader range at the time.

It was found that the 5004 was a hard slog with the 75hp four-cylinder engine and so many were fitted with turbochargers offered by Northrop as an update. In 1966 the company introduced the 5004/6 that carried the 112hp six-cylinder Ford 2704E engine mostly. Northrop’s had a habit of breaking axles and was rather underdeveloped but Ross said their example has been reliable over the years. In fact Ross said he would sell the tractor to a good home of course – call 07860 486444, but no time wasters please.

Sussex Finest the Drury’s Scania is ready to leave the Caterpillar 235X is something else and magnificent machinery never used as such.

Photos: Tom Drury

The Caterpillar D6D features the 3306 140hp engine and is like new!

and can cut to a depth of 15ft.

The hidden away star at Biddenden was certainly the exciting 1966 Northrop 5004 of Ross Douglas.

SCIENCE MUSEUM SELLS TRACTORS!

What are your thoughts on the Science Museum selling off another batch of their heritage tractors, particularly as Frank Smith from Lincolnshire gave the majority of the 58 tractors to the Museum in 1982 for nothing?

The collection is kept at the Science Museum’s reserve Wroughton Airfield site near Swindon, which could be such a wonderful museum for the nation, but the Science Museum has not exactly made much effort to resolve the situation there at all.

There have been so many plans for the site that have come and gone that it has become rather a joke when you get down to it. It is worrying that the museum has decided to sell off yet another batch of tractors, which were all significant types used in the UK in their day - none are preservation imports.

Four of their tractors were consigned here to the recent Cheffins Vintage Collective on Saturday 22 October, they were: 1929 MasseyHarris 12-20 No.105800, a very nice example carrying a PTO and would not take much to get running which sold for £4,800 grade 2/4. The 1942 Lend-Lease Farmall A No. 84748 with PTO and optional belt pulley raised £1,100 in grade 2/4 condition and the big British used 1941

Minneapolis Moline GTS No. 1612365, typical of a Lend-Lease threshing tractor of its time, in very complete order sold for £3,100 in grade 2/4. Nuffield M3 petrol/paraffin that started life as a three-wheeler fitted with the excellent fuel mixing carburettor system which was the best in the world at the time. The tractor went on to sell for £1,800 + VAT.

IMACULATE 25,000 HOUR RENAULT

On Saturday 1 October Bleatsoes held the John North retirement sale at Stratford upon Avon and the much respected farmer saw a huge crowd attend in the glorious sunshine of the day.

The major feature here was a 25,000 hour (yes you did read that correctly) 1990 Renault 65-32 two-wheel drive tractor with Quicke 340 loader. The exceptional condition outfit was of course a one owner machine and had been well looked after – it changed hands for £9,600 + VAT.

The excellent condition and very clean 1983 Renault 651S again looking nearly new sold for £4,400 and the New Holland TX32 combine was yours for £11,000 on the day, again very clean indeed.

Other significant prices were: New Holland TD 5 with loader £31,000, New Holland TS110 £12,600, New Holland T6.145 £46,000

The star of the sale was the 25,000 hour 1990 Renault 65-32 which was a perfect tractor to add to your collection and sold for £9,600

The huge crowd here saw the New Holland TX32 combine sell for £11,000 in immaculate condition

and Valtra T111 £26,500 all four-wheel drive and immaculate grade 10.5. The farm sale certainly showed that if you look after your tackle it pays great dividends in the end.

New Holland T6.145 was the top lot at £46,000 on the day in exceptional condition

This New Holland TD5 sold for £31,000 in stunning condition

The New Holland TS110 was used for hedge cutting and sold for £12,600

Looking immaculate is the £26,500 Valtra III, prices for Valtra’s are holding up very well these days

Nuffield M3 that started out as a threewheeler changed hands at £1,800 + VAT

Selling at £32,000 + VAT is the 1992 MF 3690 four-wheel drive with 5,593 hours

bargain of the sale had to be the Mercedes MB-Trac 1000 at £9,500

COUNTY REPLICA MAKES IT BIG

Despite the current economic climate the Cheffins Vintage Collective on 23-24 October hit the ground running and it was that way right to the end of the two day sale which was a great success all round.

The highlight came after the sale. The bidding on the County 1884 Dutch replica (that had been created some years ago using a Ford TW-35 donor tractor and County 1454 axle) stopped at £95,000 but the deal was done after the sale for well over £100,000. The Super Q cabbed monster looked good with brand new BKT tyres all round and carried much patina about it, particularly the bonnet.

There were some lovely original classic Massey Ferguson here and the 1992 Massey Ferguson 3690 datatronic four-wheel drive with just 5,593 hours was got away for £31,000. The 1996 Massey Ferguson 372 four-wheel drive with Trima loader and 1,933 hours was yours at £30,000 again in stunning condition. The 1981 Massey Ferguson 550 two-wheel drive two-door red cab, radio, PAS and PUH with 5,026 hours that had been featured in Tractor & Machinery earlier in the year was got away at £18,000. Lastly the 1983 Massey Ferguson 290 fourwheel drive GEL699Y looking very clean was yours for £12,000. All these MF lots carried VAT attached to them. The semi-matt paintwise, but very clean 1963 Roadless Super Major SSU337 changed hands for £16,500 over £6,000 more than the vendor paid for it a few years ago.

The immaculate and well known 1964 Fordson Super Dexta with half-track Bombardier track conversion that had featured at many a Ford and Fordson Association event over the years (It had genuinely carried these tracks while working for the Forestry Commission in south Wales) changed hands at £9,000. As for the 1961

Fordson Dexta with road style rear tyres in grade 4.7 condition that needed a bit of a paint tidy up on the nose cone this was yours for £5,500. A later 1963 New Performance Dexta AFW542A in good restored condition was to sell for £6,200.

There were one or two shocks in the ‘blue’ department when a 1964 Fordson New Performance tractor with a Mil Master loader, PAS, Lambourn cab, roll bar, side belt pulley and an older repaint went on to sell for a record £11,500 + VAT, yes you did read that correctly.

Perhaps the bargain of the sale was the 1987 Mercedes-Benz MB-Trac 1000 in very original condition, with only surface rust which went for £9,500.

However the main interest for many was the first six tractors that came up from the Bainbridge family collection which was started by the late Edwin Bainbridge in the 1960s who was one of the pioneers of the movement and a great character in the veteran tractor preservation movement.

First on was the 1918 Alldays GP Mk1 no. 388 which in preservation times had been fitted with a period RAF WW1 Thornycroft of Basingstoke J-type 3 ton M4 lorry engine which came from a Republic of Ireland scrapyard. In full running order and one of only six said to have survived there was much speculation that it would sell for approximately £80,000. In the end it sold for 44,000 to a Suffolk buyer which is possibly more like the correct price remembering that it’s a period hybrid really.

There was also the amazing centre track American made c1916 Bates Steel Mule C type which spent its working life in County Wexford, Ireland before ending up in a Dublin scrapyard in quite a state. Thanks to the influential Robert Kennedy who saved not only tractors, but steam

traction engines, lorries and other things the Bates came to Edwin Bainbridge in Yorkshire who set about restoring it. The original Erd engines were known to be fragile and a Meadows of Wolverhampton four-cylinder ohv engine went in that’s said to have come out of a Moline combine with a replacement transmission. It looked very presentable and was seen at a number of high profile events in the 1980s, but needs re-restoring now and sold online for £32,000.

It was to be followed by the 1919 Overtime Model N no. 17954. This example had the original dark green livery underneath the later ‘Johnny Popper’ green who took the Waterloo Boy Gasoline Engine Co over on January 1 1918. This one carried a non-original Serck radiator which was replaced presumably when restoration was carried out it went on to sell for a good £42,500.

It was followed by a record breaking (price wise) machine for the 1918 Illinois Super-Drive 16-32 no. KU1630, which is unique in Europe today and was sold new to Ireland where it worked in County Tipperary for its working life. The tractor came from the late John Mann Collection in Cambridgeshire in a very rough state and was given an excellent restoration in Yorkshire. It carries a Climax KU engine, but unfortunately its engine blocks are cracked and had metal paste on them which was holding the water in relatively well although some drips were seen. Even so this type of tractor hasn’t made tons of money in the USA before and a new world record was created here when £35,000 was paid online for it.

The

Heading back to East Anglia is the 1918 Alldays & Onions GP with Thornycroft period engine at £44,000

The 1956 Ferguson TE-F in 2/3 condition raised £3,750 on the day

The big one on the day was the County 1884 replica sold after the sale for well over £100,000

The safe and reliable way to buy and sell machinery and equipment

Wrights Farming Register offers farmers and contractors a uniqueservice through its team of brokers. They are the ‘men in the middle’ who give an impartial opinion on the items of machinery they handle on behalf of their clients. The brokers, who currently cover an area stretching fromthe Scottish borders to the South Coast, can save farmers time and money when it comes to buying or selling anything from acombine harvester to a cattle trough. In these security-consciousdays, they also provide adiscreet alternative to apublic farm dispersal sale and can help farmersavoid the tax pitfallsthese can cause.

CONDITIONS CATEGORIES

EXCELLENT Full workingorder,bright andundamaged paintwork, low usagefor year VERY GOOD Mechanically sound, will go straight to work,little wear for year GOOD Clean and tidy,mechanicallygood, mayrequireservice or minimal repair AVERAGE Complete unless stated,normal wear andtearfor age, mayneed somerepairs. Thedescriptions areprovided as aguide only and relate to machine condition when inspected by the broker

S10271 RIPVATORRBS 840

Mounted bale squeezercarries 40 balesonloader or 3point linkage. Appx2.1m wide by 1.8m tall could get48onata push Good Condition %$Shaun 07850$978188

BEET HARVESTING EQUIPMENT

RS1390

S10306 KONGSKILDE 12 ROW

Rear mounted Interow hoe, fitted disc markers, heightwheels, 2spring tinesper unit with Ashares and Pair of cutaway weeding discs. Hydraulic folding fortransport Good Condition £3000 %$Shaun 07850$978188

BUILDINGS/STORES

RS1439 MEZANINE PORTAL FRAME As NewC/W all the Boltsand Brackets24mt Long x4.8mtHigh x9mt wide 4BaysPlans and picturesonrequest Excellent Condition £10000 o.n.o. %$Robin$07831 886601

S10275 CLARKE FLOORTEC 350 Electric pedestrian floor sweeper c\w dustboxand side suction. Appx65cms wide Good Condition %$Shaun 07850$978188

RS1471 MASSEY FERGUSON MF8 PlotCombine Harvester6ft cut tanker fittedwith Bagging System in working order though notbeen used fornumber of years Very Good Condition £1520 o.n.o.

%$Robin 07831$886601

S10105 NEWHOLLAND 13 FT HEADER Quick attach type tosuit Early 8000 seriescombinesc\w mechanical reverser,stone hump, Lifters,Side knifespare knives and bed trolley Good Condition %$Shaun 07850$978188 S10110 MF 38

BeetCleaner

S10276 ETA0.55 KW Roof mounted fanappx60cms by 50Cms Diameter. Single phase Good Condition %$Shaun 07850$978188 S10288 BRICKS AND TILES Large quantity of 3” plain redbricks been in lime mortar nowcleaned on pallets.Plus Quantity of Handmade Traditional clay tiles Good Condition %$Shaun 07850$978188

S10156 CLA AS SIDE KNIFE Hydraulically driven with 1.3m cutterbar,

S10146

RS1458 FARMFORCE FRONT

MOUNTED PRESS 3point linkageFurrow Pressall rings sound Photosonrequest Good Condition £500 o.n.o. %$Robin 07831$886601

RS1460 KONSKILDA GERMINATOR

S10221 2011 KVERNELAND CTSEVO

4mt working width, in very good order,onlyused on the Fen, LocatedNrSpalding,Pictures on request Very Good Condition £1750 %$Robin$07831 886601

RS1461 GANG ROLLS5MT

Choice of 2nicemachineswith 4front 340/65-15 swivelling wheels, Rowofangled discs appx 430mm. 2rows of legs with top leaf springs and wide Ashares or reversible pointswithnarrowerA tips(one end tungstenfinished). 2of550/60 -22.5 transport tyres. Rowofsublift tines and Kernerpacker Very Good Condition £10000 ono %$Shaun 07850$978188

S10222 2005 KVERNELAND CTS4.5M Trailed cultivator,4 10/5 65 -16swivel wheels, Angled discs, 430mm. 13 sprung Ashared legs in 2rows.2x 550/60 -22.5 Tyres. 7Subtiller legs, levelling boards and packers. Good Condition £3950 %$Shaun 07850$978188

S10286 SIMBAX PRESS4.6M

“X”

%$Robin$07831 886601

RS1459 OVERUM XDISC HARROWS

RS1206 KV VICON UNICORN

folding drill. Hopper

enable holding a tonofseed. Access stem, Pre emergencemaker shutsoff 3rows

12 RowBeetDrill,Hydraulic folding,TramLining,Section Control, by Isobus Markers, Hardly used Sale due to change of Farming policy,Many Spares available as well. MorePictures on Request Excellent Condition £13500 %$Robin$07831 886601

RS1305 KRMSOLAR 799

leaves asingle mark. RDS in cabbox with hopper alarm. Very Good Condition £7750 %$Shaun 07850$978188

S10219 STOCKS ICON 8Outlet electric small seed seeder unit. Mounted on long beams to suit Kv CTS.Plus Toolbars and platforms forspreader plates Good Condition %$Shaun 07850$978188

Robin$07831 886601

S10118 FARM FORCEFRONT

MOUNTED 4M Single ring Press9 Rigid model with slightsteerage, Small toolboxframe and 40 degree cast rings. Little used Very Good Condition %$Shaun 07850$978188

S10134 4.8M Manual Folding Springtine harrow.Wellmadein 40mm Box, folds fortransport Good Condition £400 %$Shaun 07850$978188

S10135 JONES HD PIGTAIL

Double coil Tine Cultivator Built of 5inch boxsection in 3 bars. 2.7M centre section with 2of0.5m wings with steel wheels which fold manually Good Condition £500 %$Shaun 07850$978188

S10136 ARMSTRONG AND HOLMES PRESSURE HARROW 5

Section hydraulic folding frame harrow with curved teethfitted reversible points. Appx5.5m working width. Good Condition £600 %$Shaun 07850$978188

S10139 HOWARD E70 Mounted 70 inch rotovator. Part worn blades. Rustytinwork Average Condition £400 %$Shaun 07850$978188

S10220 CULTIVATION SOLUTIONS

6M RAPID LIF T

Trailed cultivation press refurbished with all newrings and bearings. It has plenty of wear left on the discs and has been barn stored. Very Good Condition £16000 %$Shaun 07850$978188

S10301 JOIHN DEERE PIGTAIL Tine cultivator appx9ft working width.14 Double one coil tines on lightweightframe End sections fold in manually AverageCondition £175 %$Shaun 07850$978188

S10303

16ftHydraulic Folding,Hydraulic Transport Wheels, In good working order,inuse this back end. Morepicturesonrequest

Location Kings Lynn Very Good Condition £3850 o.n.o. %$Robin$07831 886601

RS1470 PARMITER UTAH 450

Pneumatic 4mtr

S10243 KUHN HR 4003 4M Powerharrow/drill combination, refurbished by Andrew Guest C\w Eradicator tines,, Heavyduty markersonthe powerharrow and packer roller.Drill has good tipsonSuffolk coultersin3rows, access step,Following harrow, hopper extension and Double disc preemergencemarkers

Very Good Condition %$Shaun 07850$978188

S10266 GARFORD 12 ROW

PreDrill trailed cultivation unit. Used with Vaderstad 600P Selection of shallowsubsoil legs mounted under platform. All the through pipework. 2 transport wheels 205 x8-10. Very Good Condition %$Shaun 07850$978188

DE-STONERS

4.50mt Working Width, In Good Working Order.Inuse this Month. Hydraulic Transport Wheels.

Location Bury St.Edmunds. More Photosonrequest Re-listed due to error WasRS1467 Good Condition £4500 %$Robin$07831 886601

S10052 RANSOMES HR46A/ 34 3.9m Working Width Heavy Offset disc harrows, fold to 3.5m. Discs appx22-24”.RearDrawbar &hyds. Good Condition £2800 %$Shaun 07850$978188

S10122 PARMITER UTAH 250 Trailed Disc harrows 3.9m working width. Ratchetadjuster forcut &width. 23” Cutaway front discs and 25” plain rears. Hydraulically lifting transport wheels with 15/56 -17tyres Good Condition £1850 %$Shaun 07850$978188

S10292 SIMBAMK2 Offset Heavydiscs, Refurb da fewyears back with 26 ins front discs and 27” rears. fittedrear drawbar and 11.5/80 -15.3 transport wheels. 11 Ft working width. Plus Double ring Simba trailed presswith leading tines. Good Condition £2500 %$Shaun 07850$978188

DRILLS

LW0057

KRM R-305 3metertine drill. All in good working order.Good wearing metal. All in good order ready to go Good Condition £2550 %$Luke 07769 665649

Mounted Hydraulic folding precision drill setupfor sugar beetdrilling.(Made by Kleine). Fittedfront clod pushers, wide rubber presswheels, tipped drilling coultersunder sliding lid seed hoppers, largerubber peg presswheels. Folds nicely to 3m. Long arm markers Very Good Condition £2000 %$Shaun 07850$978188

S10280 GOSPARDO MARTA 250 Mounted 6row Maizedrill C\w markersand fertiliser hoppers Very Good Condition %$Shaun 07850$978188

S10305 GARFORD KVERNLAND UNICORN 12 ROW Hydraulic folding Precision drill. Setupfor Sugar beeteach unit having clod pushers, tungstentipped coulters, narrow rubber presswheels and Twin rubber peggedVee press wheels. Folds up horizontally so seed staysinhoppers. Recently upgraded to latestKverneland control boxtotramline etc in sync with latestISO bus tractors Very Good Condition £6750 %$Shaun 07850$978188

ELEVATORS &CONVEYORS

RS1341 FYSONS 28FT YTRACK

ElevatorC/w 10ft Slewing Extension, 3phase electric, Hydraulic DriveWheel. Only been used forgrain, excellent condition, Can be delivered at cost to be agreed. MorePictures on request Very Good Condition £3500 o.n.o. %$Robin$07831 886601

RS1440 FYSONS YTRACK 27ft 3phase elevatorc/w Various Hoppersand extension Side boards. Dry Stored, Notbeen usefor 3yrs, PhotosShortly LocatedNr. LitchfieldStaffs Good Condition £2500 o.n.o. %$Robin 07831$886601

S10169 PALLET TRUCK SHOP PRINTERS MODEL Pedestrian Manual palletmover. Fitted 800mm tinesRated 2500 kgs. Well made and hardly used Very Good Condition %$Shaun 07850$978188

S10232 STRIMECH GRAIN BUCKET Suit MatbroAppx 7ft6ins wide Straightenough and fittedwith extended wear plate Good Condition %$Shaun 07850$978188

S10259 1999 HYSTER 4 TON HeavyDutyindustrial fork lift Lifts 5.5M with triplexmast( Closed Height2.6m )runs on 250/70 -1.5/7.50 t& 7-12 tyres Full Rops and 4cylinder Perkins engine Good Condition %$Shaun 07850$978188

S10277 BV WESTERGARD PALLET TRUCK Pedestrian pallet truck with 1m long tines@0.5m centres Good Condition %$Shaun 07850$978188

GRAIN EQUIPMENT

S10269 RUTTHERFORDSDE AWNER Augerstyle unit appx 1m long 8ins tube with 6Inch squareinletattop of one end and outletunder the 3phase motor. Good Condition %$Shaun 07850$978188

GRASSLAND EQUIPMENT

LW0042 KRONE

RS1188 2019 MC CONNEL 270 MAGNUM

HeavyDutyFlail mower, Very HD whale tail Flails, Front or Rear Mount,, Hydraulic Side Shift, LargeRearRoller,Big High Inertia Rota, ExtraheavyDuty Bearings, This is anew machine neverbeen outofdry store. More picturesonrequest delivery can be arranged at pricetobeagreed NewCondition £6850 o.n.o.

%$Robin$07831 886601

RS1367 2018 MA JOR MJ30

350 Cyclone Finishing Mower TractorMounted PTOdriven, Hydraulic Folding Large DiameterRoller,Muti rotary disc cutters, Galvernised Hood, Full Road Lighting,Hardly used as New. More photosonrequest, Transport canbearranged Excellent Condition £6250 o.n.o.

%$Robin 07831$886601

RS1398 GEOBROWNS 2.3 FLAIL MOWER

Kroneeasycut R320 mounted mower. 2017 manufacture.Non conditioner.Owned from new, good wearing metalstill on the skids. Has notdone amassive amount of work in itslife. Good Condition £4500 o.n.o. %$Luke 07769 665649

LW0043 MASCHIO

C/W Hydraulic SideshiftMulti Point CAT2Linkage. Whale Tail CastSteel Flails, HDRearRoller, Opening Rear Access Door More photosonRequest,OverRun Gearbox Excellent Condition £4850 o.n.o. %$Robin$07831 886601

RS1426 KILWORTHSOVEMA

Maschio 3meterflail topper 2015 manufacture.Has had recent beltsand skids. Front and rear mounted. Runs smoothly. AverageCondition £3550 o.n.o. %$Luke 07769 665649

LW0058

Browns post driver.Good heavydutymachine with low horsepowerrequirement. Has just had afullnew setofhydraulic pipes. Workswell. Hydraulic ram is in good shape.Morephotos on request

AverageCondition %$Luke 07769 665649

RS1368 CHARTERHOUSE VERTI TOP

S10274 GATE BARRIER Single arm type in 60mm Box5.3m wide.C\w 2posteach1.8m by 100mm. Painted Green NewCondition %$Shaun 07850$978188

MUCK &SLURRYEQUIPMENT

Artificial Surface SportsGround Cleaner,Tractor Mounted PTO driven Sand Vacuum Filter 5ft working width good working order,MorePicturesonRequest, Location Buckinghamshire Very Good Condition £2500

%$Robin$07831 886601

RS1421 2017 LISTER NOVA

Dribble

Electric Sheep Clippers3” cutting Combesinworking order,single phase electric Very Good Condition £250 o.n.o. %$Robin$07831 886601

RS1428 ISSIS 1MTR SC ARIFIER SlitterScarifier to fit compact Tractoringood working order, one or twophotosonrequest,Dry Stored AverageCondition £350 %$Robin 07831$886601

RS1429 COMPACTROLL 4F T Ball Hitch towed WaterBallast, Like New, Suit compactTractor Or quad bike ExcellentCondition %$Robin 07831$886601

RS1447 TAYLOR IAE WEIGHER Taylor CattleCrush! With (IAE Weigher Approx 3yearsold) For sale Due to retirement. Location Kenilworth. PhotosonRequest Canbedelivered at cost to be agreed Very Good Condition £1250 %$Robin 07831$886601

RS1464 ARTIC DOLLY Blacksmith converted on Ring hitch, Super Single wheels, NO BRAKES,Photos on request AverageCondition £500 %$Robin 07831$886601

RS1465 STOCKS DUALS Mitas 520/85 R38 Tyres70% Good, Complete with All Clamps, LocatedNrSpalding,Photoson request Very Good Condition £975 %$Robin 07831$886601

RS1466 MICHELIN FLOTATION To Fit John Deere, Rear 8006 65R 70% good, Front 540 65 R28 M108 50% Good, Photos on Request. Location Spalding Good Condition £1975 %$Robin 07831$886601

S10167 IBC 1000 LITRE Polythene containersinside palletised frames. 1.8m by 1.8m. Used forfood products.Also quantity of Largegood quality bait boxes. AverageCondition %$Shaun 07850$978188

S10265 THOMASMOUNTED Material layer,3 point linkage mounted to lay material over beds forweed prevention. Galvanised frame 2.5m wide overall will take rolls up to 2m wide.Has 2rubberheightwheels, 4angle discs and roller.Been used with Tildent Mulchtex1.5 x 100cm x50. Very Good Condition %$Shaun 07850$978188

RS1468

KVERNELAND LB85

5Furrow Reversible Vari Width Plough. C/W 240 type Headstock. No.8Bodies. Furrow Splitters on Shares,ManureSkims,Standard Depth Wheel. Areally good very clean plough in use this autumn, MorephotosonRequest Transport canbearranged Very Good Condition £3750 o.n.o. %$Robin$07831 886601

S10117 DOWDESWELL DAFP

FURROW PRESS Double 30 degree cast ring pressfor 5 Furrow plough,still sharp &sound Good Condition £500 %$Shaun 07850$978188

S10154 DOWDESWELL DP1 5

Plus 1(6)Furrow reversible plough. Mixed 14 inch bodies 34 point topoint. Manureskims Offset headstock and depth wheel. Good Condition £950 %$Shaun 07850$978188

S10172 DOUBLE RING PRESS

C\wtop tray forweights etc, Narrow cast rings %$Shaun 07850$978188

S10200 LEMKIN VARIOPACK

110 Plough press, 2Rowsof40 degree 70cms pressrings about 2.35m wide for5Fplough. C\w Transport headstock and arms Good Condition £750 %$Shaun 07850$978188

S10206 OVERUM BV397F 3+1(4)

Reversible plough, worn 16 inch bodies, Good trashboards &skims included butnot fitted. Very Straight.Includes ahydraulic release pressarm. AverageCondition £800 %$Shaun 07850$978188

S10207 LEMKIN VARIOPACK110

Double ring Furrow pressc\w transportheadstock and 18 of 30 degree rings. Good all round order Very Good Condition £1000 %$Shaun 07850$978188

S10208 GREGOIRE BESSON HYDRAULIC PRESS ARM to fit HRDC 7plough. Folds in hydraulically fortransport and releaseshydraulically Very Good Condition £400 %$Shaun 07850$978188

S10291 2014 DOWDESWELL 145 MA SERIES

5Plus 1(6F) On /Off land manual variable width plough. 3ftpoint to point 30ins under beam, Seen little wear on kind land. Manure skims and rear discs.Verynice plough. Very Good Condition £8750 %$Shaun 07850$978188

S10189 TONG FREE STANDING Line suitable one tonBox rotator c\w itsown 3phase powerpack to rotate it.. AverageCondition %$Shaun 07850$978188

S10279 1TON 1Ton 6Board palletised potato boxes6ft by 47inch deep by38tall. One inch gaps between boards, inside postsrounded off. %$Shaun 07850$978188

POWER HARROWS

RS1359 LELYPOWER HARROW 3MTR COMBINATION DRILL Combination C/W rear Piggy Back linkage&RECOSulky Suffolk Coulter Seed Drill. With Rekie Following Harrow,Veryclean Machine Directfromfarm, ready to go to work, Can Be delivered at cost to be agreed. MorePhotos on request Very Good Condition £2750 o.n.o. %$Robin$07831 886601

RS1363 1990 KUHN HR350

RS1472 2020 AMERZONE UF 1501

S10212 CASE GEM 2600 ES Trailed 24m 2600 litresprayer Tracking linkagewith 6cylinder pump on top. 200 Litrewashout tank. Induction bowl. Single lineswith quad jets.23.1 -26 & 300/95 R46 tyres. Allstraight and undamaged Good Condition %$Shaun07850$978188

S10239 2017 HARDI

Tractorthree Point Mounted Sprayer C?W20Ftbooms Mixing tank &Handwash, Ambset controls, Current 12 months Cert. Reason forsale going Organic Notusedlastyear. More pictures on request Excellent Condition £17500 %$Robin$07831 886601

S10013 BERTHOUD BETA 12M Mounted sprayer c\w 4Section manual controls and electric on/ off. Manual Xfolding booms fittedwith Quad jets and winch to raise &lower.Frammounted pump with PTOshaft. Average Condition £500 %$Shaun 07850$978188

S10040 HARDI COMMANDER MULTITRACK

3.5mt PowerHarrow. Newtines ExtraLow speed Gears, Packer Roller Dry Stored, Instruction Book, Forsale due to change in farming policy.MorePictureson request Good Condition £3500 o.n.o. %$Robin$07831 886601

S10240 2005 RECO MASCHIO DM 4000 4M Powerharrowrecently fittednew tines&Gearbox. Good packer roller with good scrapers. Rear clod board& Bracketsfor eradicators Good Condition £2550 %$Shaun 07850$978188

S10241 LELYROTERRA 3M Powerharrow. Tidy order Good Condition £950 %$Shaun 07850$978188

S10257 RECO MACHIO DM 3000 3M PowerharrowFitted HD Through shaftgearboxand Hydraulically controlled packer with nylon scrapersand clod bar. Done little work ideal for acombination drill Very Good Condition £2850 %$Shaun 07850$978188

S10302 LELY33SERIES 3M Powerharrowwith good club tines, front clod bar,Heavy duty through shaftgearbox and open centrecrumbler.Noleaksquite tidy forage NewPTO guard. Good Condition £750 %$Shaun 07850$978188

SPRAYERS

RS1444 BERTHOUD 3000

Trailed

Trailed Sprayer 24mt, 3000ltrs, on RowCropWheels, Self tracking Draw Bar Induction Bowl, Hand Wash Bowl, Wash down hose Long term CurrentCertificate Very Good Condition £5000 o.n.o. %$Robin$07831 886601

S10007 HOWARD PARAPLOW

LW0054

S10126 2010 VALTRA T202 VERSO 4wdTractor in black livery.Only 3800 hours. 70% 650/65 R42 rears. Nice well speccedtractor Very Good Condition %$Shaun 07850$978188

S10284 2007 CLA AS ATLAS 946 R2

4+2+1 (7) leg paraplowc\w bracketsfor discs butonly one present. Generally good especially wear plates.11.5/80 -15.3 depth wheel Good Condition %$Shaun 07850$978188

S10141 2LEG HeavyDuty Subsoiler 6ftwide5inch box toolbar 230inch legs with good wings and points Good Condition £600 %$Shaun 07850$978188

S10149 TWB 5 LEG Heavyduty Veeform type subsoiler with 5 swivel legs on 3.8m wide toolbar fittedpacker roller on the back Very Good Condition £4500 %$Shaun 07850$978188

S10223 TIMAG 2 LEG Trailed Heavydutymole drainer.Pulls 2reversible 4ftmole legs hardly worn on one end with opener discs. 212.5/ 80 -15.3 Transport tyres.2verygood rams to lift out. Very sturdy unit. Very Good Condition %$Shaun 07850$978188

TANKS

S10152 TUFFA10,000LITRE

Cylindrical plastic tank used for watertosupply sprayer Very Good Condition £900 %$Shaun 07850$978188

S10168 TITAN 5000 LITRE High Grade polythene single skin round tank used forwater.2.01m Diameter, 2m high. Green colour Good Condition £1000 %$Shaun 07850$978188

TRACTORS &EQUIPMENT

MasseyFerguson290 four wheel drivetractor with loader.Has had alot of work done including engine overhaul including lots of newparts. Loader has had all newpipes and fittings along with aEuro8headstock fitted. All the electrics and hydraulics are working.Very clean tractorfor its age. Hashad alot of moneyspent on it. 5644 hours Very Good Condition £12600 %$Luke 07769 665649 LW0056

S10127 2001 MF 8250 POWERCONTROL

4WdTractor,285

Front

14 Ton root trailer,compete kit removed from trailer Very Good Condition £1475 %$Shaun 07850$978188

S10190 IFOR WILLIAMS 12 BY 6 Flat trailer,wheels underneath with alloychequer platefloor. Ex Livestock trailer Good Condition %$Shaun 07850$978188

S10249 PET TIT 8TON Tandem axle drop side trailer.Runs on 12.5/80 -15.3 tyres. Steel frame timber floor &sides. Straight body appx13ft 3long Average Condition £1500 %$Shaun 07850$978188

4wdtractor on 40%650/65 R42 rears, fittedpick up hitch. Approx 8000 hours. Very smart tractor Very Good Condition £21500 %$Shaun 07850$978188

S10128 1987 MF 2685 Tractor, latemodel with electronic hydraulic controls, 70% 16.9 R38 rears. Only 4651 hours, Straight tractor Good Condition£8000 %$Shaun 07850$978188

S10159 YARA NSENSOR ALS ActiveSensor kit, comeswith all the wiring loom &sensorsplus Windows 10 IPad with in cab mounting.Roofmounting unit has itsown lightsource fornighttime operation. Very Good Condition £5750 %$Shaun 07850$978188

S10209 1972 FORD 4000 2wd Tractorbasic model, no caborroll bar.70% 12 -36rears, 10 -16 or 7.50-16 fronts. Recently restored well. Very Good Condition %$Shaun 07850$978188 S10215 ELECTROCARS TUG

S10300 1986 MF 675 2wdTractor fittedMulti powergearboxin working order.8416 hours, 13.6 -36rears40% 7.50 -16fronts 20% 2Spools, pitch up hitch. All glassincab,good roof lining with radio.Runs well buthas usual cabissues. AverageCondition %$Shaun 07850$978188 TRAILERS RS1354

S10261 2016 MARSHALL QM 11400 14 TonMonocoque trailer on 460/60 -22.5 Tyresc\w Air & Hydraulic brakes plus Hydraulic back door,Mudguards, Sprung drawbar,front ladder and window opening Good Condition %$Shaun 07850$978188

S10290 2011 BAILEY TB 14 General purpose monocoque trailersc\w Sprung drawbar, Arched front window, easy sheet, hydraulic back door with grain chutes. Tandem sprung axleswith 10 stud wheels, Nokian 560/60 22.5 floatation tyres andhydraulic brakes ( fittingstherefor air) Choiceof 2 Excellent Condition %$Shaun 07850$978188

VEGETABLE EQUIPMENT

front weight frame Good Condition %$Shaun 07850$978188

FENDT IDEAL 8T COMBINE

JCB 4220

CLAAS ARION 650 CEBIS 50K

2019, £265,000. 1024 hrs, air con, Powerflow, 360 camera system, LED worklights.

Tel: 01476 590077, Grantham.

FENDT IDEAL 8T COMBINE

2015, £149,950. HillMaster, 1735 drum hrs, 2439 engine hrs, 30K ProDrive, 4WD, air seat, A/C, fridge, AutoTrac ready, APC chopper, Zurn 635X header, twin side knifes.

Tel: 01844 278843, Oxfordshire.

JOHN DEERE S690I HM

2017, £82,000. 5,055 hours. Field Pro pack. Front 600/70R30 - 40%. Rear 600/70R30 40%.

Tel: 01233 822205, Ashford.

NEW HOLLAND T7.210

2016, £66,750. Approx 5000 hours, c/w GPS PILOT and S7 Terminal, 540/65 R28 fixed rim, 650/65 R38 fixed rim, CLAAS front linkage 4.0 t, External operation for front linkage and front spool valve, Side rails on transmission and engine for front linkage.

Tel: 07919 887863, Winchester.

CASE IH PUMA 165

2019, £259,500. 941 hrs, air con, Powerflow, 360 camera system. Tel: 01476 590077, Grantham.

JOHN DEERE S790I

2017, £149,950. 1517 drum hrs, 2109 engine hrs, 40K ProDrive, Hillmaster, Premium cab with leather air seat, A/C, fridge, 2630 screen, active terrain adjust, LED beacons, Extending Knife 635X header.

Tel: 01844 278843, Oxfordshire.

CLAAS QUADRANT 5300 FC

2018, £75,000. 1,400 hours, 4WD, cab suspension, front suspension, air brakes, exhaust brake, front linkage, very good condition.

Tel: 01825 841100, East Sussex.

CLAAS ORBIS 900

2017, £63,000. 4,500 hours. Tel: 01825 841100, East Sussex.

CLAAS LEXION 580

2019, £219,950. 569 engines hrs, 1138 drum hrs, 40K ProDrive, Premium cab with leather air seat, A/C, fridge, AutoTrac ready (no dome), Active yield. Tel: 01844 278843, Oxfordshire.

JOHN DEERE S690I HM

2021, £120,000. ine Cut chopper, 120x90 bale size, Air brakes, Full width Power Feed pick up auger, Large 620/50/R22 tyres, K80 ball hitch, Tandem steering axle, Moisture sensor, Weighing tailgate. Tel: 01798 343660, Petworth.

MASSEY FERGUSON 9380AL COMBINE

2018, £74,940. 9.17m, 12 row, AUTO CONTOUR ground-contour following, Wear plates for PREMIUM LINE skids, Forage harvester attachment with transport system, Drive 3-speed. Tel: 07919 887863, Winchester.

CLAAS ARION 630 CIS

2006, £59,000. Air conditioning, straw chopper, chaff-spreader, cutting unit carriage, Self leveling,header extension for rape seed harvesting, rape cutter, Cabin.

Tel: 01403 753403, Billinghurst.

JOHN DEERE 6195 R

2018, £167,450. 1235 engine hrs, 725 drum hrs, 30K ProDrive, Hillmaster, Premium cab with leather air seat, A/C, fridge, 2630 screen, AutoTrac ready, APC chopper, twin side knives, 635X header with shelbourne header trailer.

Tel: 01844 278843, Oxfordshire.

2016, £115,000. 35 Foot Superflow Header,. Autolevel, Front tyres: 900/60/32, Rear tyres: 600/65/26.5. 1351 engine hr, 1085 drum hr, 2002 acres cut, Chaff spreader.

Tel: 01476 590077, Grantham.

2019, £68,950. 2300 hours, Claas Arion 630CIS, 50kph tractor, 24/24 gear HEXASHIFT with HEXACTIV automatic transmission and CREEP box, ELC electronic linkage control, Lower links cat.3 with hook.

Tel: 07739 788296, Tingewick.

2015, £57,750. John Deere 6195 R. 4 Spools. 50K. Air Brakes. Pick Up Hitch. Front Linkage. Front Spool. Cab & Front Suspension. Passenger Seat. Air Con. Tyres 650/65 R42 – 540/65 R30.

Tel: 01622 870087, Maidstone.

JOHN DEERE S690I HM

JCB 416S

FORD 3930

2011, £57,500. New tyres, pallet forks, 50mm front pins on carriage, new bucket and hawkfork available.

Tel: 01403 753403, Billinghurst.

VALTRA N163 VERSU

2015, £55,000. Excellent condition, 115LT/Min hydraulisc, 3-speed PTO, heated air seat, push out pick up hitch, front linkage.

Tel: 01403 753403, Billinghurst.

MASSEY FERGUSON 7278 COMBINE

2014, £25,750. 4x4, PAS, Year 2014 with Only 460 Hours, 45 HP, 4 Cylinder Engine, Cab, Hydrostatic Drive, Shuttle Transmission, Air Con, Grassland Wheels and Tyres, Kubota LA714 Power Loader With Joystick, Kubota L2256 Bucket, Kubota LA854EC QPLFK pallet forks, Road Registered, One Owner From New.

Tel: 01233 732439, Ashford.

JOHN DEERE 6200

1991, £18,750. 4x4, Year 1991 With Only 3594 Hours, 45 HP, PAS, PUH, c/w Forward/Reverse Shuttle, Quicke 2300 E Loader, 3rd Service, Quicke Headstock, 2 Owners, 1 Private, Ardingly Showground the Other, Exceptional Original Condition.

Tel: 01233 732439, Ashford.

MERLO TELEHANDLER

£2,950.

LEYLAND 253

2003, £13,450. On 04 Plate V5 available, Perkins Engine, 3.5T Lift, 12.37mtr Lift, 405/70-20 Tyres 45%, Well Looked After Machine.

Tel: 01243 575333, West Sussex.

MCHALE 998 BALE WRAPPER

1996,

VOGEL & NOOT TERRAMAT

2008, £49.500. Aircon, 2793 engine hours, Powerflow, Autolevel, rape auger, straw chopper.

Tel: 01476 590077, Grantham.

KUHN MERGE MAXX 950

1993, £22,500. 4x4, Year 1993 with 6274 Hours, 89 HP, PAS,c/w Forward/ Reverse Shuttle, Power Quad Gearbox, Air Con, Power Loader With Joystick Control.

Tel: 01233 732439, Ashford.

NEW HOLLAND TN75 S

2002, £6,995. Round Bale Kit, Nice Clean Wrapper, Ready For Coming Season.

Tel: 01243 575333, West Sussex.

SAM SPRAYER

£45,000. In excellent condition, barn stored since new, ready to go to work.

Tel: 01476 590077, Grantham.

NEW HOLLAND T6.160 EC

2015, £40,000. Stock number 3112 3173. Tel: 01825 841100, East Sussex.

2001, £19,750. 4x4, Year 2001 With 6849 Hours, 75HP, PAS, PUH, 40K, c/w Forward/Reverse Shuttle, Air Con, 2013 Trima +2.1 P. Loader With Euro Headstock, Joystick Control, Super Steer Front Axle, Immobiliser.

Tel: 01233 732439, Ashford.

£4,250. 24mtr, Triple Nozzles,

FORDSON POWER MAJOR

£2,750.

KUBOTA L4240 COMPACT TRACTOR AND LOADER

54

www.farmmachinery.co.uk

FARM MACHINERY

Kelsey Media, The Granary, Downs Court, Yalding Hill, Yalding, Maidstone, Kent, ME18 6AL 01959 541444

EDITORIAL

Rebecca Farmer Email: fm.ed@kelsey.co.uk

ADVERTISEMENT SALES

Jamie McGrorty 01303 233883 jamie.mcgrorty@kelsey.co.uk

GRAPHIC DESIGN

Jo Legg

Flair Creative Design jo.legg@flair-design.co.uk 07306 482166

MANAGEMENT

CHIEF EXECUTIVE: Steve Wright

CHIEF OPERATING OFFICER: Phil Weeden

MANAGING DIRECTOR: Kevin McCormick

PUBLISHER: Jamie McGrorty

RETAIL DIRECTOR: Steve Brown

RENEWALS AND PROJECTS MANAGER: Andy Cotton

SENIOR SUBSCRIPTION MARKETING MANAGER: Nick McIntosh

SUBSCRIPTION MARKETING DIRECTOR: Gill Lambert

SUBSCRIPTION MARKETING MANAGER: Kate Chamberlain

PRINT PRODUCTION MANAGER: Georgina Harris

PRINT PRODUCTION CONTROLLER: Kelly Orriss

DISTRIBUTION

Distribution in Great Britain: Marketforce (UK) 3rd Floor, 161 Marsh Wall, London, E14 9AP Tel: 0330 390 6555

Distribution in Northern Ireland and the Republic Of Ireland: Newspread Tel: +353 23 886 3850

PRINTING

Acorn

Kelsey Media 2022 © all rights reserved. Kelsey Media is a trading name of Kelsey Publishing Ltd. Reproduction in whole or in part is forbidden except with permission in writing from the publishers. Note to contributors: articles submitted for consideration by the editor must be the original work of the author and not previously published. Where photographs are included, which are not the property of the contributor, permission to reproduce them must have been obtained from the owner of the copyright. The editor cannot guarantee a personal response to all letters and emails received. The views expressed in the magazine are not necessarily those of the Editor or the Publisher. Kelsey Publishing Ltd accepts no liability for products and services offered by third parties.

Kelsey Media takes your personal data very seriously. For more information of our privacy policy, please visit Kelsey Media takes your personal data very seriously. For more information of our privacy policy, please visit https://www.kelsey.co.uk/privacy-policy/ . If at any point you have any queries regarding Kelsey’s data policy you can email our Data Protection Officer at dpo@kelsey.co.uk.

FREE FARM ADS

good tyres. In good working order.

TEL: 07724 847397, Alton, Hampshire.

KUBOTA B3030

FEATURED LISTING

£13,800. 680 hours. Full mower deck and vacuum collector. Great condition all round

TEL: 07498 060299, Essex

FORD 3000

FEATURED LISTING

FORD 5000 TRACTOR + FLEMING TOPPER

£POA. All good, power steering, missing cab roof, owned by same owner for 40 years. Plus Fleming 6ft Topper

TEL: George 0208 6603907, Surrey

BOLINDER MUNKTELLS BM10

JOHN DEERE 7530

2008, £32,500. Excellent condition. One owner from new and well maintained. With 11500 hours.

TEL: 07836 343262, Sussex

£5,000. 2172 hours. Barn stored including front loader, bucket, stabilizing block for rear, good tyres, runs well bought as seen TEL: 01732 882534, Kent

JCB FASTRAC 4220

POA. Bolinder munktells bm10, hot bulb tractor, has electric start and 3 point linkage, runs good and in very good condition, delivery can be arranged.

TEL: 07388 530078, Ireland. 115987

CASE C

2018, £85,000. 3500hrs, 65k front linkage, 4 electric spools, full leather, LED lights and previously had GPS. Great condition and working order, never been abused. New replacement arrives soon, hence reason for sale.

TEL: 07828 004344, Sussex

£3,000. One of the last built starts runs drives

TEL: Jason daytime 07855 399487, South West. 116841

BROWN 780 NARROW

1970, £2,750. Mechanically spot on, engine instant start with no smoke, oils and filters changed. Hydraulics operational, valve block rebuilt, just needs cosmetic work. Selectamatic with live drive 1970. No V5 but has old tax disc with reg.

TEL: 07714573053, South East. 116255

DAVID

DAVID BROWN 950

FORD 7610 SERIES 3 SUPER Q

MASSEY FERGUSON MF135

NUFFIELD 4/65

£2,500. Including loader and buck rake. History known in same family for 60 years. Very original. Barn stored.

TEL: 07798 517149, South East. 116398

FERGUSON FERGUSON TEF

1992 ‘J’ reg, £14,500. 1 owner. 4wd, Everything works inc radio, 2 spools, new seat, new battery. Front tyres as new, rear sound but treadles. Please call 07407084017, Yorkshire and the Humber. 117137

FORDSON SUPER MAJOR

1971, £7,000. W/cab andkeys. Pick up hitch. External valve. Pedal accelerator. New bonnet, radiator, ex manifold, instruments, brakes, drums, wheels, goodyear diamond tyres. Good oul pressure, first time starter, full tank.

TEL: 07903 448575, Scotland. 117134

MASSEY-HARRIS 33

£1,950.

1947, offers over £1000. Ferguson TEF. 3-cylinder conversion, narrow orchard model. Used for doing vines previously in Cambridgeshire.

TEL: 01695 722219, East of England. 116914

FIELD MARSHALL SERIES ONE

1961, £8,000. Imported from South Africa 2014. South African wheels, original tin work and paint in good condition. New seat, rear lights, wiring loom, tyres fitted, UK registered. Believed unique.

TEL: 07507 795022, South East. 116286

POA. Nnice electric start tractor very original in working order

TEL: Jason daytime 0785 5399487, South West. 116269

MASSEY FERGUSON 1805

£9,000. Barn Find in running order. P

TEL: 07707 834833, Yorkshire and the Humber. 115799

FIELD MARSHALL SERIES 3A

1960, £4,495. This tractor is in very original condition as it has been in the south of France all it’s life. Works as it should and a very sweet engine. All tyres are good. The most resent work it has had is a new duel clutch and steering box parts.

TEL: 07787 882204, North East. 116391

FORDSON MAJOR

POA. Nice tidy tractor runs perfect located in Ireland delivery arranged anywhere in uk.

TEL: 35 3876 899772, Ireland. 116394

£20,500. Refurbished for saving, including twin seats, lights and V5. Starts easy with a cartridge, always kept in dry storage. In full working order. P

TEL: 01295 690254, South East. 116925

1952. Model Rare Petrol/TVO model for restoration. Recent runner and some recent work undertaken. Good tinwork for age. Fitted with Hydraulics and PTO.

TEL: 07808 366095, South West. 116879

FORDSON DEXTA

RAINWATER GUTTERING FITTINGS

MASCHIO PINOCCHIO SUBSOILER WITH DOUBLE SPIKED ROLLERS

SUBSOILER

£15.

2019, £3,000. 3 leg subsoiler with double spiked rollers at the back. This is a superb sub soiler with curved legs as opposed to the traditional straight legs of your common subsoiler. The curved legs more effectively crack and shatter the soil and get rid of hard pans whilst also lifting the profile. The double spiked rollers at the back do a beautiful job of cultivating the surface soil and pressing the soil lightly down. If used correctly with the spiked rollers pressuring down into the soil then they will also incoroprate trash in with a couple of passes. This can be done by adjusting both the rollers themselves and the 3 point hitch on your tractor. If your interested in the implement I also have a video of it in action which I can send you. Implement is currently at Cambridge Machinery Sales in Sutton – this is where collection would have to be arranged from.

TEL: 07585 605411, Cambridgeshire

£350. Old but in working condition

TEL: 07712 108189, Berkshire

ROLLER

AND REAR DRILL

£1,000. Shorter agricultural roller and drill

SMALL TRAILER

RICHARD WESTERN FEED TRAILER

MARTIN MARKHAM TRAILER

LAND ROVER DEFENDER 90

TDI COUNTY HARDTOP

LAND ROVER DISCOVERY 2 TD5

£350. 1520 x 900mm sides, 380mm drop down tailgate, good tyres, dry stored, new lighting system.

TEL: 07951 095003 or 01993 891566, Witney, Oxon

3 TON TIPPING TRAILER

£250. Tips fine but needs floor and sides

TEL: 07904 882474, Sussex

2001, £4,250. 10T Pto driven auger with hydraulic arm and internal slide. Roll Over sheet, barn stored. Ideal for outdoor pigs or poultry for filling feed hoppers.

TEL: 07713 067595, Hampshire

URBAN ARTIC TRAILER

£500. 1971 Trailer. Used by us since new. Unused and surplus to requirements. Hydraulics fully working with new hoses in last few years.

TEL: 07966 299713, Surrey

FARM VEHICLES

VAUXHALL VIVARO VAN

1995, £19,995. 2 Owners. New Mot. Original and well maintained. Hydraulic winch. Safety Devices internal/ external roll cage. SVO Landrover. 1995 ref but on a cherished plate to be included in sale. Too many extras to list. Same owner for last 24 years. Not off roaded. 105000 miles. Regularly serviced. Open to sensible offers.

TEL: 07836 580554, Hampshire

MITSUBISHI SHOGUN DI-D

2003, £2,800. Silver. 155,000 miles. MOT Mar 2023. Runs well. Clutch release bearing a bit grumbly. Lots of paperwork. New front brakes/ callipers. Set of new tyres to go with.

TEL: 07915 393640, Sussex

VW TRANSPORTER

Offers. 28ft. New brakes, Air bags & drum, good tyres

TEL: 07860 366802, Kent

BIGAB HOOK LIFT SYSTEM TRAILER

£4,500. Panel van, 2.7T, MOT March 23, 83000 miles cw/ working fridge unit

TEL: 07973 893035, Kent

TRACTOR MACHINERY TRANSPORT

2009, £16,000 +VAT. New brakes, new mudguards and new lights. Very good condition.

TEL: 07724 847397, Alton, Hampshire

£POA. Transport available for Light tractors/machinery/ cars/vans/4x4s etc. 7.5t lorry Equipped with winch. Non runners/barn finds etc.

TEL: 07857147746, south UK

2003, £950. 5 door auto. Spares or repair. Sun roof, leather interior, air con, cameras and computer etc etc. Good condition but no mot. Brakes need attention. Starts and drives. Very good tyres and tow bar. plus another swb for spares. TEL: 07850739699, Berkshire

£5,750 No VAT. 58 plate, 1 owner from new, double side loading doors, some small dents ideal camper conversion, new MOT TEL: 07973 426665, Sussex

FENCING

CHESTNUT FENCING STAKES

£POA. Mixed halves and quarters. 10/12cm tops. National delivery available. TEL: 079852 98221 www.cwpfencing.co.uk

The Radial Range

The Bias range

The high traction farm & agriculture vehicle front and rear bias tyres are developed for mighty performance over hard and black soil for sturdy crop that leaves behind strong stubbles. Properties of self-cleaning, improved puncture resistance and longer tyre life assures farmers of a tension free usage. Working on fields across the world, our Bias tyres come in 4 ranges to suit different terrains.

HAY, FORAGE & GRASSLAND

TOPPER

MAJOR 8′ SWING ROUND TOPPER

WHEAT

MOWER

£900. Had some welding to make arm much stronger and in good working order

TEL: 07850 739699, Berkshire

PORT AGRIC CUTLET 5FT

TOPPER £700. Suitable for use with Fordson Dexta/MF35/MF135 and similar horse power tractors. Always kept under cover, recently repainted, no welding repairs. Hasn’t been abused in use. Complete with PTO drive shaft.

TEL: 07742 805225, Kent

SHIBAURA ROTARY MOWER

£POA. 2022 season winter wheat for sale in 25 kg bags. Good sample. Second prize local ploughing match. Can be delivered.

TEL: 07780 928915, Sussex

STRAW

£POA. Hesston bale straw. Wheat, barley, oat available 120x70 wheat straw

TEL: 07825 650266, Ashford, Kent

SILAGE

£POA. Silage – 4ft round bales, double wrapped. Help loading, possible delivery.

TEL: 07808 671670, Horsham, West Sussex HAY

£POA. 4ft round bales. Help loading, possible delivery. TEL: 07808 671670, Horsham, West Sussex

2010, £4,450. Shibura 60” out front rotary mower 3400 hours serviced, new back tyre, new battery, gator blades on cutting deck.

TEL: 07860 653638, Essex

£1,500. Blue topper mower, in working condition

TEL: 07712 108189, Berkshire

CHILLTON TOPPER

BOMFORD SABRE 9 FT

TOPPER

TRIPOD AUGER

£250/100.

01892

CHAIN AND FLIGHT CONVEYORS

£175. c/w 3phase motor 33ft

TEL: 01892 722532 evenings and answerphone, Kent

AERATION LATERALS AND FITTINGS

£75. Quantity

TEL: 01892 722532 evenings and answerphone, Kent

£1,500. Has been owned by us from new. Surplus to requirements.

TEL: 07966 299713, Surrey

£1,200. 9ft Bomford topper very good condition new skids

TEL: 07778 525037, Buckinghamshire

PARTS &

ROBOTIC

KOMATSU PC26 MR-3

HOW TO SPOT A SCAM ADVERT

ANIMALS FOR SALE

POINT OF LAY HYBRID PULLETS

FEATURED LISTING

CAUTION

We are currently aware of a number of fraudulent advertisers attempting to sell items within this section.

While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.

1.

SPEAK TO THE

FARMER

Always look into whether an advertiser appears legitimate.

2. VIEW THE ITEM

If you can, view the item on the farm first.

3.

AVOID ERRORS

Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.

5. NEVER PAY IN ADVANCE

Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.

6. PAYMENT

Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.

Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.

POA. Various breeds and colours including Black Rock, Light Sussex, discount for quantity

TEL: 01795 532848 / 07759 320496, Faversham, Kent

PEDIGREE POLLED HEREFORD BULLS

TURKEYS

£32. 23 weeks old Kelly Bronze Turkeys. All outside during the day and In very good health. £28 each From 1st December price will go up by £1 per week. Over 100 available.

TEL: 07999 516664, Just outside Canterbury, Kent

MANGALITZA BOAR

Reasonable priced. Top quality, quiet, easy calving bulls with good structure, high carcase values and rapid growth rates. From low risk TB area. All bulls scanned, weight recorded and blood tested for IBR, BVD, Lepto and Johnes. BVD vaccinated. Some HCS Superior carcase sires, all bulls qualify for meat scheme premiums.

TEL: 01243 262252 or 07881 944394, West Sussex

FISHER POLL HEREFORDS

£60. Lovely 6 year old red Mangalitza boar for sale. Good breeder, lovely temperament and electric fence trained. Losing our land for houses, thus a sad sale.

TEL: 07530 901504, Essex

MANGALITZA SOW

POA. 23 females some with calves. Good ease of calving, high growth rates and exceptional carcass values. Ideal for a starter herd or additional to existing herd. Reasonably priced. 48 month TB area, Biobest High Health scheme.

TEL: 07881 944394 / 01243 262252, West Sussex

PURE BREED WELSUMMER AND CREAM LEGBAR COCKERELS

£175. Beautiful 3 year old mangalitza sow for sale. Blonde with dark red ears. Has produced some lovely coloured litters. Very friendly good Mum. Electric fenced trained. Pure bred but can not be registered. Losing land for housing so a sad sale

TEL: 07530 901504, Essex

LARGE BLACK PIGLETS/ WEANERS

£6. Born June 2022

TEL: 07778 026675, Kent

£40 each. Large black piglets/weaners available, mum and dad can be seen. Pedigree.

TEL: 07885 912444, Kent

SHIRE STALLION

Looking for a new home. Due to a bereavement, this Shire Stallion is looking for a new home. More info available on request. TEL: 07510 139126, Sussex

BEST QUALITY WEANERS

£60. Commersial hybrid weaners, Peitrain/Large White/Duroc cross, ready early January. (Picture taken at 3 weeks) These pigs have exceptional confirmation, are very fast growing and will not get too fat even at bacon weight. They are ideal for milk feeding, and are very robust, happy in a deep litter ex cow pen. Book now, I will re-advertise next month with updated pictures if I have any left unbooked by then.

TEL: Anne 01323 440147 (answerphone), Sussex

AUSTRALORP COCKEREL

£20. A good example of this fine breed. Large, heavy fowl, said to be a study and hardy breed. 18 months old.

TEL: 07720 756330, Kent

MANURE SPREADER

FEATURED LISTING

TYRES 420/85/R24

£360. Pair of part worn Firestone tyres, very good condition

TEL: 01983 821130, Isle of Wight

HOUSEHAM AR2500 SPRAYER

TALL WATER TANK

£850. New Holland rear discharge low sided twin axle manure spreader, ideal for stable yard, in working order TEL: 07778 525037, Buckinghamshire

HAND SPRAYING LANCE FOR QUAD BIKE USE

2003, £19,500. 7680 hours. 12/24m booms, single and triplet nozzle bodies, RDS Delta 34i rate controller, 540/65R28 and 320/85R32 wheels (750/50R26 flotation wheels also available but not included in sale price). In very good condition with MOT till March 2023.

TEL: 07771 657872, Kent

HARDI SPRAYER

£50. TEL: 01732 882534, Kent

WATER TANKS

AMAZONE GREEN DRILL 200

£1,000. Trailed Hardi sprayer, 12m boom, 400lts tank, Honda engine, flotation tyres TEL: 07730 065598, Hampshire

TANKS & BOWSERS

3 EX 1500 LITRE ORANGE JUICE CONTAINERS

Approx £30-£40 each. 4 galvanised water tanks, 1 plastic tank £30 TEL: 01732 882534, Kent

DIESEL TANK SHED

£1,500. Includes mounting brackets and outlets

TEL: 07730 065598, Hampshire

£120 each. Screw on lids

TEL: 01243 787579, Sussex

WATER TANKS

£1,200 +VAT. Built on metal frame 2500LTR diesel tank with battery pump fitted, metal security door with key lock, can deliver at extra cost

TEL: 07973 426665, Sussex

FEATURED LISTING

£30-£40 each. Selection of different sized tanks ideal garden planters

TEL: 01732 882534, Kent

DIESEL TANKS 1300L AND 2500L £250 each or £400 the pair. Two diesel tanks available, 1300l and 2500l bunded tank.

TEL: 07714 150355, Kent

ANVIL

COMPLETE VINTAGE DIY POWER TOOL WORKSHOP

£450. Viewing welcome

TEL: Martin 07885 306055

Please phone (NO TEXTS), Ashford, Kent

BLACK & DECKER 1960’S VINTAGE DRILL ATTACHMENTS

£20. These are very collectible - 1x Jig Saw, & Guide, 1x Sander and Horizontal Bench Stand to fit original metal B&D Drill. Sold as lot only. Cash on collection

TEXT: 07817 801287, West Sussex

LARGE QUANTITY OF BLACKSMITHS TOOLS

£50. A 1960’s Vintage collection of Black & Decker Power Tools consisting of Model 520 two speed drill c/w chuck key, drill press stand, saw attachment and guard, 4 X spare saw blades, jig saw attachment, sander attachment, spare sanding sheets, 12” hedge trimmer attachment, horizontal bench drill stand, circular wire brushes, emery disc attachment & spare discs, circular grindstone, polishing mop. Complete lot only, no separation. Cash on collection TEXT: 07817 801287, West Sussex

TURFING IRON

From £10 each. Viewing welcome

TEL: Martin 07885 306055

Please phone (NO TEXTS), Ashford, Kent WORKSHOP DUST & CHIPPINGS EXTRACTOR

DEXION GUILLOTINE

£60. Unused Wall Mointed Axminster APTC WV1000

c/w 2 X lengths 4” diameter flexible pipe, 1200 watts, 230V, GWO. Parts are still available from Axminster Tools and the sale includes a Workshop Manual. Cash on collection.

TEXT: 07817 801287, Sussex

JETMASTER OPEN FIRE PLACE

DANISH TROLLEYS

DUSTBINS

£50. Sandringham, black, leather side saddle boots size 39, slim leg fitting. These boots are special side saddle ones, they are shorter than normal riding boots used for dressage etc. Used but in good condition, comes with boot bag. Please TEXT with questions.

TEL: 07748 796211, Sussex 7

ITEMS

LADIES CLOTHES –SIZE 8 /SMALL

£50. Size 8 but on the larger side rather than the small and do not fit me.

Boden wrap around top size 8, red and white flowery pattern, worn once.

Hobbs size XS green and white pattern wrap around top, worn once.

The Fold light blue size 8 blouse, used.

Boden size 8 petite beige cargo trousers, not worn still has label attached.

Boden size 8 petite grey cargo trousers same as beige ones, but worn once.

Boden navy blue trousers size 8 regular, not worn but no label.

Boden size 8 navy blue long skirt not worn but no label. For sale all together as one transaction. Please TEXT in first instance.

TEL: 07748 796211, Sussex

£250. Triple rope ladder and separate roof ladder. VGC, hardly used. TEL: 07583 078354, West Sussex