Bell Agricultural Ltd Support That Lasts a Lifetime
Tractors
*Used* Deutz 6180,16 reg, FL, front pto
ROBUST AND RELIABLE TRAILERS THAT KEEP GOING WHATEVER THE LOAD, TERRAIN OR CONDITIONS
Baling & Tedders
£55,000
*Used* Deutz 7250,16 reg, FL, front pto, 3500hrs £75,000
*Used* Deutz 62 15TTV 18 reg, 3000hrs, full spec POA
*Used* Deutz 8280, full spec, 60k, front linkage, 710/70/42 80% tyres
*Used* John Deere 6170R 14 reg, 50k, 6,000 hrs
*Used* Ford 7810 series 3 air con H reg, 7600 hrs,
*Used* John Deere 6155R, 1150 hrs, full spec, 21 reg
*Used* John Deere 6920, auto power, TLS, 05 plate, front linkage/PTO
*Used* John Deere 6900 40k, R reg
*Used* John Deere 6330 07 reg, 40k, air con
*Used* John Deere 6330 10 reg, 40k, air con, 6500hrs
*Used* John Deere 6330 10 reg, 40k, loader, air con, 6250hrs
Wheels
£27,500
£16750
4x 580/60/22.5 wheel and tyre assemblies, ex Bateman sprayer
*Used* Claas Variant round baler, nice condition
*Used* John Deere 862 round baler, 2011 (Nice)
*Used* John Deere 854 round baler
*Used* Claas 7.7m tedder, 2020, tidy
*Used* KV 9443 rake
*Used* KV 9439 rake
*Used* KV 8452 tedder
*New* 2324M disc mower
*Used* Star mini round baler, ideal hobby farmer
Machinery
£13,300
£15,000
£10,500
£7,000
£6,100
£6,100
£6,850
£5,350
£3,500
*New* Ritchie 6m hydraulic folding grass harrows £2,950
NEW
12.5.80x15.3 6-stud wheel/tyre £165
NEW Super Single 10-stud wheel/tyre £250 NEW Super Single 8-stud wheel/tyre £250 MAIN DEALER
ULTIMATE CONFIGURABILITY. A VAST SELECTION OF CONFIGURATION OPTIONS TO SUIT THE WIDEST RANGING NEEDS
GREENCROP IRRIGATION
2023 CLAAS TRION 730 MONTANA £POA Ex Demo, c/w V930 VARIO Header, 245/116 hrs, 25 kph, P/spreader, SPECIAL CUT, Swath former, CEMOS package CRUISE PILOT, FIELD SCANNER/LASER/AUTO PILOT ready, Dust Extr, ROTO PLUS Standard 4/6, Yield/ QMETER, piv XL unload spout, CB brake, Drive axle tyres 800/70R32, Steering axle tyres 500/85 R24, Premium lights LED & seat, G/METER, rear camera
2019 CLAAS LEXION 770 TT £242,750 V1230,30 kph,2,705 / 1,070 hrs,RHVknife,C-Bar Brake, Dust Extractor,Yield/Q Meter,Grainmeter,Telematics,Cruise control,Air Compressor,Power Spreader,Straw Chopper,Chaff Spreader,AutoCrop Flow,Belt feeder housingAUTO CONTOUR with cutterbar brake,Trailer hitch auto,Dust extraction for feeder housing,CRUISE PILOT,APS,4D-cleaning system,linseed rotor,3D hillside sieves,GRAINMETER incl.returns volume measurement with CEBI,Grain tank 13,500 litres,Grain tank unloading tube 4XL, Power spreader - SPECIALCUTchopper,S10 GPS steering
2017 CLAAS LEXION 670 M T4F
£179,950
V770 Header, 30 kph, 1513 / 959 hrs, 500/70R24 Fronts, 680/85R32 Rears, LH laser, C-Bar Brake, Dust Extractor, Yield/Q Meter, Grainmeter, Yield mapping, Air Compressor, Straw Chopper, Chaff Spreader, Reversing Camera, Dust extraction for feeder housing MONTANA, Side risers for straw walker, 3D sieves, GRAINMETER incl. returns volume measurement with CEBIS display, Comfort seat air-suspended, Inclination sensor, CCM,
We re recruiting
2022 CLAAS QUADRANT 5300FC
£129,950 Fine Cut rotor, 51 knives, Moisture meter, Weigher, 620 tyres, steering axle, Air, LED lights, Auto Lube, 8,878 Bales, excellent
2017 CLAAS LEXION 670 TT
£189,000
V770,1435/1,072 hrs, knife, Side risers, 3D, Dust extr, 3D, air comp, fridge, TM ready, LED, GPS S7,QM
2021 CLAAS JAGUAR 950 4WD
£235,000 PU300, 24 Blade Cylinder,
2023 CLAAS VARIANT 560 RF
£37,500
2012 CLAAS VOLTO 870
2023 CLAAS VOLTO 800
Ex Demo, 2,154 Bales, 2.35m PU, Comfort net wrapping, 500/50-17 tyres, CEMIS 700, Battery cable, Remainder of MAXI CARE Protect 1+2 years 8000 ba/yr (24000 ba)
OLIVERS are a long standing family business with nearly 200 years of experience, we have many employees with over 30 years service with the company. In 1947 the business became the first independent CLAAS dealer in the UK, and has gone from strength to strength since that time. The last 4 years has seen significant growth resulting in an expanded sales territory and the addition of three new branches at Reading, Winchester and Petworth. As a result of this expansion OLIVERS has a number of exciting new career opportunities within the business and are looking to appoint new dedicated staff to fulfil the following roles:
£7,350 Hydraulic folding, Pivoting headstock, CKL suspension, 6 arms per rotor, 8 rotors, 8.7m working width, Good condition
available at Petworth, Winchester, Reading & Luton
Due to the expansion of OLIVERS, we have exciting new opportunities for Experienced Service Engineers to join our growing team. You will play an important part in the servicing, maintenance and repair of CLAAS equipment to support our customers. A knowledge of combines, tractors and forage harvesters is desirable, however, full product training will be provided at the CLAAS Academy. More importantly, you will have the desire to provide the highest
www.oliveragriculture.co.uk
£11,950 6 rotor tedder, 7.7m, Teds 3x 3m mower swaths, Spare wheel and bracket, Headland curtain, Lights and markers, Max spread system, Barn stored, Only 250 acres, Superb condition
2019 HORSCH TERRANO 4.4 GX £37,800 4m working width, 42mm hitch, 400/60-15.5 support wheels,
level of customer satisfaction, an ability to learn new skills and the willingness to succeed. In return, we offer an excellent package including a competitive salary, contributory pension plan, laptop with the latest diagnostic software, mobile wifi connection, mobile phone a dedicated service van and extensive holidays. If you would like to move forward with a highly successful dealer allied to a global brand we would like to talk to you.
Hitachi ZX19U, 2018, 1.9 tonne, new tracks, 1192hrs, expanding tracks, o set, piped c/w quick hitch and 3 buckets
£10950
JCB 8025, 2015, blade piped, 2 speed tracking, 3 cylinder Perkins engine, c/w 3 buckets
£14250
£12500
Browns Flat 8 grab, 2 years old, bolt on Chilton brackets, has done very little work.
£1495
Kuhn Primor 2060M straw chopper, 2018, swivel spout, electric controls, variable speed bed, immaculate £7750
Kubota U10-3 micro digger, 2017, expanding tracks, 1825 hrs,piped, o set, GWO, c/w 3 buckets
£8750
Doosan DX27, 2018, blade, piped, o set, 2123 hours, hydraulic quick hitch, 2 speed tracking, c/w 3 buckets, Very Tidy
£15750
JCB 8008 micro digger 0.8 tonne, expanding tracks, extending blade, 3 cylinder Perkins eng only 810hrs, c/w 3 buckets
£6750
JCB 530-70 Agri, 3ton Li , 7metre reach, pick up hitch, single joystick control ready for work
£POA
AS Marston/ Gri ths 12 tonne silage trailer, 8 stud super singles, sprung drawbar, auto rear door Very tidy
£7750
Kubota 1.5 tonne micro digger, 3 cyl Kubota engine, 2952hrs, blade, o set, piped,2 speed tracking, c/w 3 buckets
£POA
Barford 9 tonne cabbed dumper, swivel skip, Cummins diesel engine, good working order.
£POA
Benford 3 tonne straight tip dumper, 3 cylinder Deutz air cooled engine, GWO
£POA (dog not included)
Double Drum Vibrating Rollers, Large Choice of machines in various widths
JCB 535-125 telehandler 2016, 3.5 tonne li , 12.5 metre reach, stabiliser legs, 3887 hrs, very tidy
£26500
Ingersol Rand 7/71 260cfm@ 7 bars 4 outlets, Daumot DPF exhaust system
Choice From £5000
JCB 926 rough terrain forkli , 2.6tonne li , 3 stage mast. JCB 4 cylinder engine, 2058 hrs, ready for work
£8750
JCB 1 tonne, hi-tip dumper, 3cyl Kubota diesel, 1297 hours, good working order
£7495
Sany SY16, 2022, 1.6 tonne,303hrs, expanding tracks, quick hitch, c/w 3 buckets
£11750
Kubota KX61-3, 3 tonne 2016, blade, piped, o set, 2960hrs, c/w quick hitch and 3 buckets
£15250
Concrete Mixers, a large choice available, 150 litre and upwards, steel or rubber wheels.
From £500
560/60 R22.5 Radial Flotation Tyres, Chrome Tipping Rams, Rear Towing Lugs, Silage Sides, Led Lights, Sprung Drawbar £29,950
EX HIRE - SUBSIDISED FINANCE AVAILABLE
71081790 JOHN DEERE 6R 155
Ex Hire, 2023, 1650hrs, 50K, AutoPowr CommandPro, AutoTrac Ready, A/C, TLS, Activations, air seat, HCS, Mid Mount, 4ESCV, PUH, LED lights, PG Warranty, £119,950
71091334 JOHN DEERE 6R 155 2023, 1952hrs, AutoPowr CommandPro, 50K, TLS, HCS, AutoTrac ready, activations, 155L/min hyd pump, hydraulic IPM, 4ESCV, PUH, air/hyd brakes, PG Warranty, £119,950
71091306 JOHN DEERE 6155R
31081787 JOHN DEERE 6R 155
Ex Hire, 2023, 1455hrs, AutoPowr CommandPro, 50K, AutoTrac Ready, Activations, TLS, HCS, air seat, A/C, 4ESCV, joy stick 155L/min hyd pump, PG Warranty £121,500
71091331 JOHN DEERE 6R155
2023, 1376hrs, AutoPowr CommandPro, 50K, TLS, HCS, AutoTrac ready, activations, 155L/min hyd pump, hydraulic IPM, 4ESCV, PUH, air/hyd brakes, PG Warranty, £119,950
2019, 640hrs, AutoQuad Plus, 50K, Isobus/Green star ready (no activation), TLS, HCS, air seat, A/C, 3SCV, PUH, John Deere 643R loader on euro 8 headstock, £99,950 £96,750
11092993 JOHN DEERE 6155R
2021, 1130hrs, AutoQuad Plus, 50K, AutoTrac Ready (No Activation), TLS, HCS, air seat, A/C, 3SCV, PUH, air/ hyd brakes, 540/65R28 650/65R38.
31093530
11081789 JOHN DEERE 6R 155
Ex Hire, 2023, 1800hrs, 50K, AutoPowr CommandPro, AutoTrac Ready, TLS, HCS, Activations, air seat, A/C, 4ESCV, PUH, front linkage + PTO W1/ESCV, PG Warranty £119,950
31090922 JOHN DEERE 6155R
2021, 1080hrs, Premium Edition, AutoPowr CommandPro, AutoTrac ready, TLS, HCS, Premium air seat, A/C, 4ESCV, Front linkage + PTO, PG Warranty,
31081051 JOHN DEERE 6R155
Ex Hire, 2022, 1250hrs, AutoQuad Plus, AutoTrac Ready, TLS, HCS, standard air seat, A/C, 155L/min hyd pump, 3ESCV, front linkage + PTO, PUH, PG Warranty £104,950 £112,950
41089025 JOHN DEERE 6155R
2020, 2065hrs, AutoPowr, 50K, TLS, HCS, AutoTrac Ready, Activations, Premium edition, A/C, air seat, 3ESCV, additional oil resevoir, powerbeyond prep, PUH, £94,750
JB JOHN DEERE 6R155 2022, 465hrs, AutoQuad Plus, 50K, AutoTrac Ready (no activation), TLS, HCS, 3ESCV, 155L/min hyd pump, hyd oil reservoir, front linkage, PG Warranty, £99,950
31088927 JOHN DEERE 6155R
11094243 JOHN DEERE 6155R 2021, 1035hrs, AutoQuad Plus, 50K, AutoTrac Ready (no activation), TLS, HCS, air seat, A/C, PUH, 155L/min hyd pump, air/hyd brakes, 540/65R30 650/65R42. £89,950
11092455 JOHN DEERE 6155R 2021, Premium Edition, 3510hrs, AutoPowr CommandPro, 50K, AutoTrac Ready, Activations, air seat, A/C, TLS, HCS, 4ESCV, PUH, 155L/min hyd pump,
11092454 JOHN DEERE 6155R
2021, Premium Edition, 3570hrs,
81087548 JOHN DEERE 6155R
2018, 945hrs, AutoQuad, 50K, Isobus/ Green Star ready, TLS, air seat, A/C, 3SCV, PUH, air/hyd brakes, 480/70R28 520/85R38. £89,950
hyd pump, PUH, air/hyd brakes, £84,950
2021, 2235hrs, AutoQuad, 50K, AutoTrac Ready (no activation), TLS, HCS, air seat, A/C, 3SCV, 155L/min hyd pump, PUH, front linkage + PTO, £92,750 £89,950
41086668 JOHN DEERE 6155R
2018, 3410hrs, AutoPowr, 50K, TLS, HCS, 540/65R30 650/65R42, 3ESCV, AutoTrac Ready, air/hyd brakes, A/C, air con, front linkage, JDLink, 4600 screen, £89,950
31083808 JOHN DEERE 6155R
2020, 3825hrs, Premium Edition, 50K, DirectDrive, AutoTrac Ready, TLS, HCS, 3ESCV, PUH, front linkage W/1ESCV, air/hyd brakes, NEW BKT tyres. £74,950
KYMCO 90-700cc
MXU465, 4WD auto model Now £4999
WESSEX Tractor/ATV Attachments
TerraVac Stable and Paddock Cleaners
Peters eld Galvanised on/off road, stock, low side tipping trailer: EXCELLENT VALUE from £975 +VAT
TYM TRACTORS
We are delighted to now have an area dealership for TYM tractors from a25-105hp, together with factory options
LOGIC ATV Attachments
USED ATVs/UTVs
HONDA TRX520 FA6, 2020, Auto, 2/4wd £6950
HONDA TRX500 FA6, Auto, 2019/68 plate, Green £5995
HONDA TRX420 FM2, Manual, Power Steering, 2020, 835 hours £5995
POLARIS OUTLAW 90, Youth machine, Blue/White. Little used £1599
POLARIS SPORTSMAN 90 Youth machine .................................. £1599
POLARIS RANGER Diesel Half Cab 2022 c800 + hours................. £14995
POLARIS RANGER Diesel, 2021, Full Cab ....................................... £13995
POLARIS RANGER Diesel, 2021/21 plate, Full Cab, c1500 hours £13995
POLARIS RANGER XP1000, 2023/72 plate, Half Cab, 240 hours . £15995
POLARIS RANGER XP1000, 2020, Full Cab and Heater £13750
USED COMPACT TRACTORS
JOHN DEERE 2320HST, 23hp, 1359hours
£7995
TYM T194, 19HP, c/w Mid Deck, Ex Demo £9995
USED MACHINERY
6’ Three Point Linkage Tined Harrow..................................................
CYCLE country 4’ snow plough assembly
£395
£450
KUBOTA wheels & tyres, ag & turf ................................................. POA
LOGIC 6’ Chain Harrow ................................................................ £200
LOGIC TRM120, 1.2m Rotary Mower, c/w B&S 12HP engine £1995
RYETEC BC100H9 Wood chipper c/w Honda engine, virtually as new £875
WESSEX LS100 Logsplitter Ex Demo................................................... £799
PHIL FORD MACHINERY
site tow bowser
EZGO Golf buggie (electric)
£650
Ex 10ft mounted grass harrows £950
Ford 4600 Rough
Ifor Williams plant trailer £1,250
John Deere power loader
Kubota ST 35 tractor
MF single furrow plough
MF 24 telehandler £4,500
MF 65
MF 135
£4,500
MF 135 restored £6,250
NH 377 c/w sledge very tidy
NH 377 Baler and sledge
Vintage cultivators
£2,750
Pallet forks £150
Power Major
RV 390 hay turner and hay drum mower
Salop 4 ton tipping trailer £950
Two Teagle 9ft toppers
Vicon 1553 vari spreader
Zetor 6911, T reg, very tidy
9ft Votex 6ft flail
3T tipping very tidy £1,350
All prices plus VAT | Selection of wheels, tyres, buckets, forks and weights. Tractors and Equipment always wanted. This is only a selection of equipment available. Please phone for more details & prices.
Tel: 01233 861456 Mobile: 07711 162001
info@philfordmachinery.co.uk
www.philfordmachinery.co.uk
MORGAN MACHINERY LTD
H.J. KNIGHT & SON
EST. 1850
Switchback Farm, Woodmancote, Chichester, West Sussex, PO18 8UL
TB014 mini digger 2004 3800 hours, Lovely condition
Shelbourne HD60T Hedgecutter 6 metre telescopic reach 2010 machine yoystick control Hydraulic roller 1.2 head good flails Head float and hyd boom breakback Ready to work £9,950
Claas Liner 3000 4 rotor rake, electric controls
Einbock grass harrows in stock 6-12 meter
Fella twin drum mower KM167 VGC
Ford Ranger Wilktrack 3.2ltr ’66 reg our own truck
Foster ST5 swipe topper Very heavy duty
Galuchio 6mtr press c/w carrier tine kit
£7,995
From £1,995
£795
£13,995
£1,650
£4,950
Gyrax HD2800 H/D topper Y18 .......................................................................
He-Va sub soiler hyd folding 5 leg V. HD
Hymari HGN150 rotovator Y09
£2,995
£8,250
£1,500
JCB 412S Shovel 1998 Due in
Knight triple press hyd folding 6 mtr
Kongskilde Delta 3mtr cultivator
Krone 6 rotor tedder 200,1 runs ok
Krone Easy cut 320-cv mo/co 2011
KRM M3 Bogbelle spreader 2011
Kuhn Axis 30.1 spreader 2007 manual controls
Kuhn Axis 40.1W weigh celled 2010
Kverneland CLD 5 mtr cultivator VGC ..........................................................
Lely Lotus Stabilo 770 6 rotor tedder
Lely Hibiscus 745 vario twin rotor rake 2011
Lely SuperZip 380 combi tedder rake
Low loader trailer twin axle c/w from mounted crane
Malone vertical log splitters in stock
NEW Malone Post Knockers hyd top link and tilt
Massey Ferguson 6255 c/w loader ’03
Massey Ferguson 590 tractor
McConnel PA6070 hedgecutter 2011
McConnel PA6085 hedger ’17
£6,500
£4,450
£1,995
£4,995
£2,250
£2,995
£2,995
£6,995
£4,995
£6,450
£695
£6,995
£CALL
£3,450
£15,995
£4,995
£14,995
£11,950
New Holland 648 round baler ..........................................................................
New Holland 644 round baler
Opico Sward lifter immaculate
Opico 6 mtr harrows 2022 immaculate
Palex 43 wood processor 2010 MII tidy
Pel Job EB406 digger, full cab, twin speed tracking
Range Rover Vogue Y03 Runs & Drives
Sicma King 4 mtr power harrow
Simba Double press 4.6 Mtr folding
Spearhead 460 batwing topper yr. 01
Teagle Tomahawk 8100 chopper 2012 giraffe chute
£3,995
£3,450
£4,995
£4,450
£5,450
£6,995
£1,250 No VAT
£2,750
£2,995
£3,995
Vaderstad Rexius twin Press fixed legs .........................................................
3point linkage post driver
550 flotation tyres to fit 8 stud trailer Vredstein rubber 80%
£4,450
£8,450
£995
£1,750 Various Malone machines held in stock including post knockers, log splitters, tedders and mowers please call for details
• WANTED Zetor 2&4wd • Mobile Welding • Air con. Repairs & Gas
• All tractor & Machinery repairs • Prices exclude VAT and delivery
J.G.F. Machinery Ltd
EXCAVATORS
Hitachi ZX210-6, 2018, 6100 hrs
Hitachi ZX210, 2019, 5980 hrs
Hitachi ZX225-6, 2018, 7000 hrs
Hitachi ZX210-3, 2009, 9400 hrs
Doosan DX225, 2009, 13000 hrs
Hitachi ZX130-6, 2017, 5500 hrs
Doosan DX140LC-5, 2018, 4200 hrs
Doosan DX140LC-5, 2018, 4900 hrs
Kubota KX080-4, 2019, 4300 hrs
Kubota KX080-4, 2017, 6350 hrs
Hitachi ZX85, 2019, 3300 hr
Hitachi ZX48, 2017, 5000 hrs
Hitachi ZX33U, 2018, 5000 hrs
Kubota KX008, 2021, 640 hrs
Kubota KX008, 2019, 1050 hrs (choice of 2)
TRACTORS John Deere 6150R, 2013, 7000 hrs, Direct Drive
£44,000
£46,000
£43,500
£23,000
£21,500
£33,000
£30,950
£30,950
£30,000
£27,000
£30,500
£18,500
£16,500
£8,500
£8,500
Isuzu N75 190, 2015, 305,000 Ks, MOT Jan 2025, very tidy
DUMPERS
Bell B25D, 2006
1.9
Fruit & Vineyard Tractors
NEW UNUSED CASE IH STOCK – 0% FINANCE
Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed,
80L + 36L dual hydraulic pump, 3 x rear remote valves and 2 x mid mount valves with ow diverters, cat 2 drawbar, premium air seat, BlueCab ltration with AC, high mounted road lights, 360/70R26 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders, halogen light pack.
£50,000. 1 + 2 payments of £10,319*
QUANTUM 80N. 91197659 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, 80L + 36L dual hydraulic pump, 4 x rear remote valves and 4 x mid mount valves with ow diverters, electronic draft control, cat 2 drawbar, premium air seat, BlueCab ltration with AC, high mounted road lights, 360/70R26 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders, LED light pack.
£53,500. 1 + 2 payments of £10,957*
QUANTUM 100N. 61197660 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, 80L + 36L dual hydraulic pump, 4 x rear remote valves and 4 x mid mount valves with ow diverters, hydraulic adj stabilisers with sway blocks for vineyard/narrow tractors, electronic draft control, hydraulic top link, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 360/70R28 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders. LED light pack.
£59,000. 1 + 2 payments of £12,002
QUANTUM 110F. M1200698 Horizontal exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, front axle suspension, 80L + 36L dual hydraulic pump, power beyond with free ow return, 4 x rear remote valves and 4 x mid mount valves with ow diverters, hydraulic stabilisers, electronic draft control, front linkage and pto, front power socket, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 380/85R28 adjustable rear wheels/tyres, 300/70R20 adjustable front wheels/tyres, guidance and telematics ready, ISOBUS ready, LED light pack.
£70,000. 1 + 2 payments of £14,222*
QUANTUM 120N. M1197661 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, hydraulic adj stabiliser and sway block for vineyard/narrow tractors, 80L + 36L dual hydraulic pump, power beyond, 4 x rear remote valves and 4 x mid mount valves with ow diverters, electronic draft control, hydraulic top link, front linkage and pto, front power socket, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 420/70R24 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, LED light pack. £70,100. 1 + 2 payments of £14,299*
*All gures quoted are subject to availability and VAT. The 0% nance is based on a maximum of 40% of the RRP after trade in or cash deposit. Manufacturers’ warranty. This offer runs until the end of August 2024. These prices are valid and correct at the time of printing but subject to any change in borrowing costs.
CONTACT your local Ernest Doe Power Area Sales Manager or Ernest Doe Power General Sales Manager, Ed Perry, on 07786 027337 or edperry@ernestdoe.com
With over twenty five years’ experience E W McTrab provides readers with reviews and tips on the purchase of various pieces of machinery.
A FINER CUT
Launched in late 2014 for the 2015 model year, John Deere 8000 Series forage harvesters have long proven to be a big step up from previous 7000 Series in terms of performance and ease of maintenance. Increasingly popular, there are now a good number of 8000 series models available used but you need to work hard to secure the right model to suit your specific needs.
To advertise alongside contact the sales team: �� 01303 233883
At launch, John Deere offered five variants of the 8000 series, the nine litre 380hp and 430hp 8100 and 8200 and the 13.5 litre 540hp and 585hp 8400 and 8500. These four models all have a ‘standardbody’ with 680mm crop channel. Topping the range was the 13.5 litre 625hp 8600 with an 850mm ‘wide-body’.
What these basics do not outline is that the 8000 differed in significant ways from previous 7000 series. In no order, the cooling pack of the Stage IV compliant PowerTech PSX engines was re-located to free up space around the chopper. This leaves more room for the corn cracker to be fitted and removed, something users of previous generation machines had long called for.
Moving to the chopper, the driveline feed rolls were enlarged to help smooth crop flow and a move to a dry sump angular gearbox to transfer power to the drive system helped boost efficiency. The hydraulics and the fan are driven directly from the engine, with a reduction in belts and pulleys. These plus other detail tweaks all helped to reduce maintenance and increase overall efficiency. Tolerance of less than perfect grass swaths was also improved.
John Deere progressively promoted its ‘i’ specification on the outgoing 7000 series, with all models in 8000 series having this as an increasingly popular option. FarmSight service and JDLink wireless remote machine monitoring are other features that became increasingly popular, with dealers encouraging ‘real time’ machine monitoring to enable them to offer improved in-field support.
A key spec that has seen a large growth in popularity is the Deere HarvestDoc system linked to HarvestLab sensors. This system, in effect, enables incoming material to be accurately analysed on the forager, recording data to include dry matter, protein, sugars and starch and with it a guide to the feed value of the forge going to the clamp. Now well-proven, a used 8000 series with HarvestLab 3000 installed will carry a premium and one many users suggest is well worth paying.
Although offered with 7000 series foragers,
JOHN DEERE
8600
Year: 2016
Condition: Good
Approx hours: 3,000 engine, 600 harvest
Comment: Corn cracker. 4WD. Entry level, non-i specification. Pick-up hitch. 30km/h transmission
Starting point: From £145,000. Similar but higher spec from £155,000
JOHN DEERE
8600i
Year: 2018
Condition: Good
Approx hours: 1,800 engine, 1,350 harvest
Comment: 56 knife drum, corn cracker, Starfire 6000, Harvest Lab. ProDrive 40km/hr
Starting point: From £175,000 to over £200K
another option you are increasingly likely to find on a used 8000 is ProDrive. This boosts transport speeds from the standard 30km/hr to 40km/hr. As a used buyer, check what is fitted. Higher specification machines may be popular, but this is not the same as suggesting you can expect all models to have all the core features you may want.
JOHN DEERE
8600i
Year: 2017
Condition: Good
Approx hours: 2,150 engine, 1,400 harvest
Comment: 56 knife drum, corn cracker, twin line additive, AutoTrac, Harvest Lab. ProDrive 40km/hr
Starting point: From £165,000, £175,000 plus not uncommon
JOHN DEERE
8600i
Year: 2019
Condition: Good
Approx hours: 1,600 engine, 1,000 harvest
Comment: 64 knife drum, corn cracker, Harvest Lab. ProDrive 40km/hr.
Good 10-row maize header included
Starting point: From £250K with maize header
The 670mm wide DuraDrum cylinders on ‘standard-body’ models were offered with a choice of 40, 48, 56 and 64 knives, these coming in straight for grass and curved for maize types. The ‘wide-body’ 8600 had the same number of knife choices, each unit being larger to accommodate the wider cylinder.
WHAT’S USED
JOHN DEERE 8000 SERIES OUTLINE AND OPTIONAL SPECIFICATIONS
Transmission Three-speed PBST electric shift or optional ProDrive fully automatic
Main hydraulics
Machine management options
Load sensing, 50 litre capacity
HarvestMonitor, HarvestDoc, HarvestLab, AutoLOC, AutoTrac
DuraDrum cutterhead Width: 680mm (SB) 850mm (WB)
Drum diameter: 670mm diameter
Knife choice: 40-48-56-64
Spout rotation
Spout reach from centre line
210 degrees
Standard: 4.73m
Option: 5.87m or 6.71m
Note: IVLOC, infinitely variable length of cut, standard
John Deere made detail design changes to the cutting system when compared to a 7000 series, a point to consider if basing your Deere forager experience on this previous generation of machine. In work, an 8000 series is typically easier to keep chopping effectively with the need for fewer adjustments. AutoLOC automatic length of cut is designed to further help consistency.
A Hardox shearbar is a common spec choice and retrofit on the 8000 series. Particularly beneficial for good performance in maize, it is worth having this type of shearbar installed, if not already fitted, by a dealer prior to having a used buy delivered.
Sticking with maize, the 8000 series moved to a bevelled disc KernelStar2 multi-crop processor that was said by Deere to be more aggressive with improved kernel processing. From a user’s perspective, another plus to the new design was its ease of removal, with a
‘swing out, swing in’ design.
Cab wise, the 8000 series was a further step up from the previous generation, with improvements including automatic air conditioning and a GreenStar 2630 touchscreen display. Daily maintenance is eased by including automatic greasing as standard.
Conventional grass pick-up widths on offer range from a nominal 3.0m to 4.5m, Kemper rotary headers of 6.0m to 9.0m also listing as options. Kemper maize headers, with automatic steering and/or automatic header control, were also offered, with a Zürn ProfiCut 620 for whole crop or grass. Pick-ups and headers are a subject unto themselves, with high specification maize headers often being retained when a forager is moved on. The original grass pick-up will typically be supplied with the machine but again it is wise to check.
For the 2016 model year, John Deere added three new models to the range, the ‘standardbody’ 13.5 litre 490hp 8300 and the ‘widebody’ 761hp 8700 and 845hp 8800, both with a Stage II/Tier 2 19 litre engine. These new models essentially carried over the same design of the existing models.
A new 9 series grass pick-up was also introduced, with stronger tines and with a roller running behind the pick-up reel to improve performance in uneven swaths. These pick-ups are noticeably better at coping with heavy and uneven swaths. The Kemper maize headers also received detail improvements with users suggesting these variants are stronger and offer improved crop flow when compared to the previous designs. A used buy may be offered with a maize header but do not assume a later forager will be offered with the unit it was supplied with when new.
It pays to really check the grass pick-up that will come with most foragers, the original design fitted to pre-2016 models representing an improvement over that fitted to the previous 7000 generation. Subsequent 2.70m 639 Premium header has several improvements, with thicker tines and improved crop flow. It is not liable to problems but check for missing tines, bent stripper plates and a worn drive chain. The tension of the latter will need a periodic check in service. Ensure the anti-scalp roller runs freely.
8100
OUTLINE JOHN DEERE 8000 SERIES MODELS
2015
2016 model year
2019 model year
2023 model year
It is not that easy to appraise the workings of a forage harvester without removing panels and delving depp into the machine. A useful quick pointer is to inspect the intake rolls for obvious damage. A forager that has had a big ‘blow up’ it may have a damaged drum, ultra-fine fractures in the cylinder being almost impossible to detect. Not as rare as you may think. Machine insurance can help dull the pain if there is a problem at some point. Factor insurance into the machine’s running costs.
HarvestLab 3000 module on the chute shows the system is fitted, but a dealer check is important to ensure the system is functioning as it should. Reliable and increasingly seen as a core management tool, this system is an increasingly common find on a used forager but never just assume the system is fitted, particularly to later models.
WHAT’S USED
There is not a great deal of clearance between the front tyres and the pick-up driveline. Look for evidence of damage in this area, and keep an eye out for muck build up when harvesting maize in less than ideal conditions.
<<
Other 2016 changes included a revised spout design, with a maintenance-free rotation mechanism, and Active Fill Control as an option. This automates trailer filling. The stone detection system was improved, with other details including a choice of LED light packages.
John Deere rationalised the 8000 series for 2019, pruning the 8700 and 8800 from the range, the remaining six models all having the ‘standard-body’ to include the 625hp 8600.
Both 9.0 and 13.5 litre power units are solid performers, with decent fuel economy. Engine problems are not common but look for leaks. Note full compliment of OEM fuel and oil filters.
Consider this if looking at a pre-2019 8600 as the latter is a wider machine.
More detail changes were made to the 2020 model year. The cutterhead frame was strengthened, with larger bearings and an improved knife grinding system. Other developments included Active Header Control that automatically locks the pick-up when raised for transport. In the cab, the operating lever has an additional 15 degrees of forward tilt to improve comfort and JDLink Connect
Open design of the chute swivel makes inspecting for wear easy. When looking a machine over, work the chute through its full range of adjustment. A damaged chute should be an easy spot, but still check.
Remote Display Access for all i-specification models included without charge for the first five years.
Bringing things right up to date, 2023 model year developments include styling changes, with the power of the 9 litre 8100 climbing from 380hp to 431hp and the 8200 moving to the larger 13.5litre engine where it develops 465hp, 34hp up on the previous 8200. The 8300 also gets a boost in power, up from 490hp to 505hp.
Deere has also introduced Busa®CLAD coating as an option on the established Dura Line Kernel Processor. The company claim this coating has been developed for highly stressed machine components to reduce wear and is available across all 8000 Series models.
A new Kemper developed 2.70m 30R grass pick-up has also been added, this featuring an 800mm diameter auger with 200mm auger flights, with a six-row tine bar, 6.5mm tines and a chainless drive.
DEVELOPMENTS AND FUTURE THINKING
John Deere made several model changes since the 8000 series launched but from a used buyer’s perspective the first key points to note are changes in engine power and the dropping of ‘wide-body’ 8600. Next are the detail changes, to include the revised
WHAT’S USED
WHAT TO PAY
Once you start to look at used 8000 series prices you will note that early models do not necessarily have a significantly lower sticker price than a later machine. Engine and drum hours help account for some variation in price, but it is condition throughout that counts. Some older or higher hour machines may have had a lot of work done to bring them up to retail standard.
The cost of new equipment continues to spiral and interest rates are going to have a growing impact upon finance packages. It is inevitable that used values will climb, making it worthwhile for dealers to invest more in stock to satisfy a growing demand for wellprepared used equipment.
This combination of factors makes listing prices harder, as specification and the amount of work done to prepare the machine all impact upon what you will pay. Any guide prices will be just that.
Series 9 grass pick-ups from 2016. The latter can have a big impact on these high throughput machines.
The core DNA of the 8000 series has not radically altered, but this is not the same as suggesting this means there has been little in the way of development. Detail improvements year on year have helped to iron out the odd wrinkle, that are to be expected with any machine, but
CAN YOU RETROFIT HARVEST LAB?
Short answer. Yes. How much? That is not easy as a great deal will depend upon the specification of the machine to which it is to be fitted. As a broad rule it will be more cost effective to look for a used model with the system already in place than add it on, but check.
Operators spend a great deal of time in a forager cab, and so should you when looking the machine over. The forage harvester will store a great deal of data within the software, so working through the system with the seller can help you glean a great deal relating the machine’s past use. John Deere cabs clean up well.
early dealer prepared foragers can deliver dependable performance for their second or third owners if well-prepared and serviced. Obviously, future dependability is very much linked into how the machine is operated and maintained.
In terms of actual working performance, later models may benefit from a pro-rata upping in power. A further area to note is the increased move toward crop monitoring. This is something that is growing in demand. When considering a used model, try and think ahead. You may not think investing in a well-specified 8000 series with HarvestLab is right for your business now, but it could be, not that far down the line.
WHAT TO LOOK FOR – GENERAL
Before going to view a potential used buy, clearly establish the machine’s specification, the pick-up with which it is being sold, if a maize header is on offer and if the machine will be covered by anything other than a basic warranty. If the forager can be viewed prior to going through a dealer workshop, then grab the chance to see it as it came in. This can help you gauge how the machine has been cared for. If you are considering a purchase outside the John Deere dealer network, call the original supplying dealer to ask if they know the machine. A business selling up all its kit is very different to an operation seeking to offload a machine as a private sale. Find out why if you can.
WHAT’S USED
When looking the machine over, check the lights, wiper, mirrors and cab glass. Dealers spends a lot of time fettling and preparing used foragers but even the most diligent may miss something.
A John Deere dealer will not retail an 8000 series forager that is in poor mechanical or cosmetic order, with models prepared for retail sale having all key wearing parts assessed and renewed as necessary to meet its anticipated workload. The more you work with a dealer the better your chance of securing a forager prepared to meet your demands. If you see a model that meets your requirements for sale by a dealer miles away
8000 OR 9000?
From 2015 until 2019, John Deere 8000 series forage harvesters included the wide-body 8600, 8700 8800 models. From 2019, the 8000 became standard-body only, with wide-body models re-branded as 9000 series.
from you, call your local dealer and see if they can help source it for you.
WHAT TO LOOK FOR – CONDITION
To do a thorough machine inspection you need to see it almost stripped ready for a major service, from the pick-up to the chopping system and back to the discharge chute. All the drives need to be checked and this is before you look at the engine to include the cooling and exhaust system. Then there is the cab and controls not to mention the transmission and wheels. To do a proper job will take several hours and will pretty much duplicate what a John Deere dealer workshop will do ahead of a comprehensive service.
The key check points of a powerful selfpropelled forage harvester have not changed over the years but the way in which modern used buys are maintained has. It is likely that most 8000 series foragers are likely to be
looked after by a John Deere dealer or forage harvester specialist.
This does not mean that tasks such as changing blades, swapping out worn chains or fitting new bearings are specialist only jobs but more that really getting a machine ready for a season of intensive work, and even swapping between crops, can benefit from some specialist help. Further, a good dealer engineer may spot something even an experienced user can miss, possibly pre-empting downtime.
This is not to suggest you can simply accept a dealer will just deliver a used buy in perfect order. You do need to check it over and ensure anything you are concerned about is investigated. The key is to know what you are buying and to be realistic about what you pay in relation to workload. Expecting a high hour, early model to deliver the same operating costs as a newer machine is optimistic. As a
machine wears it will clearly place greater demands on your maintenance budget. A key early check is to look at the machine’s engine and chopping hours. The amount of work a modern forager can do is huge, with some contractors putting in more work in a year than other operations will over several seasons. This can mean there are relatively ‘young’ high hour models up for grabs at more affordable prices. These typically ex-contractor models can make an excellent used buy, particularly for those with a relatively low annual workload. There is every chance these machines will have been well-maintained and possibly have a high specification. As is always the case, putting out feelers early is the best way to be at the front of the queue when a suitable machine becomes available.
SUMMARY
The lowest sticker price 8000 series forage
harvester on offer will still demand a healthy capital outlay. It has always been important to match your buying and operating budget when investing in any item of equipment but, with a modern self-propelled forage harvester the financial pitfalls associated with making a poor buy can be significant. Regardless of your 8000 series experience it is important to seek advice and talk through your needs typically with a John Deere dealer. They have access to the largest pool of used models and will help if you are perhaps considering a used buy from another source. The best used buy is not the cheapest one you can afford but the one that delivers the lowest operating costs. This is all too easy to overlook when a temptingly priced model is offered for sale. As always, the best advice is to seek advice.
With thanks to Robert and Andrew Moore, Walworth Farm, Warwickshire, and David Gain and Dan Phipps, Farol Ltd.
Maize headers are a substantial investment and will typically be sold separately. If you are after a header to go with a used buy it is worth doing a separate search or enlisting a dealer to help you source a good match for your prospective purchase.
WHAT’S USED
FIND OUT BEFORE YOU VIEW A FORAGER
• Chop length applicable to drum fitted
• Tyre size and actual transport width
• Kernal processor type
• Maize chute extension to match header
• Auto Header height control ready needed for 10-row maize headers and above
• Dual Drive 40km/hr and 4WD popular but not standard
• Dura Line components fitted
• PowerGard warranty. Taken out by the original purchaser. Cover lasts for up to five years /2,500 hours
• If you can patch into JDLink technology
32
EVENT SCENE
If you have a story, or an event, please do get in touch: peterlove@madasafish.com, TEL: 01323 833125 Peter Love,
I write this in mid-July with the weather still very ‘off and on’ as we experienced at the 2024 Kent County Show.
It was a pleasure to provide the commentary for the heritage parades in the new larger parade ring and in the Astor ring on the Friday of the show. Despite the rain showers it all went ahead as
programmed which was good to see. There were 34+ Fordson tractors on show this year, but we have treble that amount entered at the Biddenden Tractorfest. This is when we celebrate the 20th anniversary of the Ford and Fordson Association on 17-18 August. I look forward to seeing you all there at this excellent show.
DUTCH HMT TOUR GROUP VISIT UK
It was a wonderful pleasure to work with the HMT Group leader AnneMarie Koetsruiter’s who came to visit myself and my wife Jayne in October when she asked for our help in creating a tour for the Dutch HMT Group.
The late July HMT Show is in southern Holland and is the largest show of its kind in Europe and is an excellent event to attend, with 2,000 tractors of all ages on show plus stationary engines and some steam. It’s the European equivalent to our much lamented Great Dorset Steam Fair and people come from all countries to attend this fine show which I first attended in 1989.
In late June I met the group near Dover and we visited a large collection that featured all types and makes of tractor, we stayed overnight in Canterbury opposite the famous Marlowe Theatre that many of you, the readers know well.
We were on the road bright and early and after visiting various collections we ended at Portway, Bristol and Keith Sherrill’s superb Oakham Treasures. If you have never been there I thoroughly recommend the museum. It has lots of tractors, stationary engines, cars, commercials, old shops and so much more and is an ideal place to take the lady too.
The following day we headed towards Cheshire via Worcestershire in glorious
The group seen at a private classic Ford collection in the East Midlands
sunshine and visited more private collections finishing our day at a large one devoted to Roadless.
Saturday was the highlight of the tour when I took them to the Kelsall Steam and Vintage Rally not far from Chester. The title does not really convey what this show is all about, which featured 450 lorries made up of 274 ERFs, 60 Fodens and other classic and vintage makes. In fact at least 10 lorries had come from Kent to attend the event. There were also over 150 tractors, tractor pulling, steam, cars, heavy horses and a great autojumble
plus some 27,000 people came through the gates over the two days, yes it was that packed.
I was sad to say goodbye to the party as they headed to Harwich and the ferry to Rotterdam on Monday evening as I headed home via various late trains to East Sussex.
This UK Dutch tour was oversubscribed and I am now to host a second tour in late August and we will take in the Hellingly, Onslow Park and Earls Barton rallies amongst many other things along the way. If you see us about do come and say hello.
For only the third time in the 73 year history of the event, the county of Nottinghamshire will be host to the 2024 British National Ploughing Championships. Thoresby Farming have kindly provided a site on their estate at Perlethorpe, near Ollerton, Nottinghamshire on 12-13 October.
The Championships are a highlight of the farming year and will feature up to 250 top ploughmen and women from all parts of Great Britain. With 15 different ploughing classes over the two days, visitors will be able to see their skills with tractors and modern reversible and conventional ploughing, compared to various vintage classes with trailed, mounted and classic ploughs; club classes for Ford and Fordson on the Sunday.
All the competitors will be striving to win the championship in their section along with the title of Supreme Champion and some will get the chance to to represent their country at next year’s World Ploughing Contest or European Ploughing Championships.
The central grassland area of the site will be taken by a trade stand area with agricultural companies selling everything you could need on the farm, from a tractor to a pair of boots. There will also be a wide variety of shopping stalls with all sorts from country wear to giftware and a craft marquee with an extensive range of items.
Sue Frith, chief executive of the organisers, the Society of Ploughmen, said, “There is
MARSHALL
The lovely genuine Marshall contractors model that every one fell in love with thought to be a 12/20
terrific interest and enthusiasm in the area and we are delighted that Thoresby Farming have provided a most picturesque site this year, surrounded by trees with free roaming deer. We are a registered charity and our volunteers can’t wait to enjoy the Estate and show off the event in Nottinghamshire”.
Trade stands, demonstrations, shopping and crafts can be booked until August and there are also sponsorship opportunities available for both small companies or market leaders. Main sponsors this year are Bridgestone/Firestone. Advanced tickets are on-line with early bird discounts available. Further information can be found on www.ploughmen.co.uk or from the Society of Ploughmen, tel: 01302 852469 and you can follow them on Facebook and Twitter.
It’s good to see more ladies taking part, we see the East Sussex representative on the Saturday of the excellent 2023 Championships in Somerset
2 August
Collective Machinery & Equipment Sale. Ashford Market, Monument Way, Orbital Park, Ashford, Kent TN24 0HB. Hobbs Parker, tel: 01233 502222.
2-7 August
Online Machinery Sale. York Machinery Sales, www.ylc.co.uk
3 August
Monthly Live & Online Machinery Sale. Holsworthy Livestock Market, Holsworthy, Devon EX22 7FA. Kivells, tel: 01409 253253.
5-6 August
Cambridge Machinery Sale. The Saleground, Sutton, Ely, Cambridge CB6 2QT. Cheffins, tel: 01353 777767.
7 August
Online Sale of Tractors, Machinery, Plant & Commercial Vehicles. Carlisle. Harrison & Hetherington, www.harrisonandhetherington.co.uk
7-8 August
Online Machinery Sale. Lawrie & Symington, www.lawrieandsymington.com
8 August
Online Sale of Farm Implements, Plant, Machinery etc. Dingwall & Highland Marts, www.dingwallhighlandmmarts.com
9 August
Online Plant & Machinery Auction. Brightwells, www.brightwells.com
12 August
Auction of Tractors, Quad Bikes, Commercial Vehicles, Implements, Machinery, Small Tools & Equipment. Longtown Mart, Townfoot, Longtown, Carlisle CA6 5LY. Cumberland & Dumfiesshire Farmers Mart, tel: 01278 791215.
15 August
Collective Machinery Sale. Sedgemoor Auction Centre, TA6 6DF. Greenslade Taylor Hunt, tel: 01278 410250.
Toy & Transport Auction. Burwash Road, Heathfield, East Sussex. Watsons, tel: 01435 862132.
16 August
On Saturday 15 June, Barry L Hawkins held a small sale at the Langer North Trading Estate, not far from the John Deere UK HQ.
Most of the stock was not spectacular, the best was a International 100 crawler loader ex military that sold for £4,200. A few lots on was a Marshall 12/20 contractor with heavy duty winch with the registration possibly FOU 934? Hardly anyone really knew about the sale apart from locals even though it was on Bid Spotter, but the tractors price just went up and up and up, finally selling to a Staffordshire dealer for a remarkable £35,000 yes you did read that correctly.
Plant & Machinery Sale. Shrewsbury Auction Centre, Bowmen Way, Battlefield, Shrewsbury SY4 3DR. Halls, tel: 01743 462620.
17 August
Harrogate Vintage Sale. Great Yorkshire Showground, Harrogate, Yorks HG2 8NZ. Cheffins, tel: 01353 777767.
Collective Sale. Hexham Auction Mart, Tyne Green, Hexham, Northumberland NE46 3SG. Hexham & Northern Marts, tel: 01434 605444.
24 August
Collective Sale of Tractors, Machinery, Livestock & Farm Equipment, Household & Agricultural Sundries. Honiton Showground, Stockers Farm, Gittisham, Honiton EX14 3AW. Stags, tel: 07968 122198.
Looking a gem is the MB-trac 1500 ready to be rallied and as a future investment
Massey Ferguson 6150 is another stunning entry in the sale
ALL SET FOR BIGGEST COLLECTIVE IN THE NORTH
Cheffins have a superb collective entry for their annual Harrogate Sale at the Great Yorkshire Showground on Saturday 17 August. As we were going to press entries were still coming in but it’s clear Massey Ferguson is a high priority, especially looking at past results here.
With this in mind there are various restored Fergusons entered including a delightful TE-A, 35s, 135s, and a fine 158F with Duncan cab. In the unrestored category is a 35, 230 and a ‘like new’ 6150 which is absolutely stunning. There is also a lovely restored MB-Trac 1500 and a beautiful John Deere 4955 four-wheel drive, further along I came to a couple of contrasting Field Marshall’s with the original Series Three and a restored Series Two with early air cleaner. Lastly there is a Nuffield 460 in very original order with very clean panels that took my fancy; this then is just for starters.
ROADLESS FORDSON DEXTA HOT
The painted Roadless Super Dexta, said to be ex Roger Haynes (ex Roadless company owner) and thought to be the last one made sold at £23,000
The French made Massey Ferguson 158F has been gone right through clearly
Looking good is the John Deere 4955 it could be just what you are looking for
While Cheffins were staging the biggest Ford and Fordson sale of the year near Evesham, Worcestershire, David James and Partners were staging the third late Harold Johns sale near Chepstow, Monmouthshire on Saturday 18 May.
The 36 tractors made strong money and were better stock than had been offered the last time there was a sale here. It was a day when Fordson Dexta’s did well with the first in off farm condition selling for £2,100 grade 2, followed by a Super Dexta with Lambourn cab grade 3 £3,150. A Super Dexta petrol was yours at £2,950 painted, grade 4 and the big one and the last lot of the day was the Roadless Super Dexta, said to be the last one made, in painted grade 4 condition, selling for a record £23,000, yes you did read that correctly!
However others to do well was a Marshall 804 four-wheel drive grade 3 £16,250, 1974 Massey Ferguson 165 (no cab) restored, grade 4 £16,000, yes you did read that correctly. Other MFs to do well were a 1975 135 restored 5 £9,000 and Massey Ferguson 35X in similar condition £7,000. As for the Massey Ferguson 250 four-wheel drive some £14,250 was paid yet another price record.
CHAILY TRACTOR CLUB VISITS GOURNAY-EN-BRAY
On Thursday 27 June the port of Newhaven witnessed an extraordinary gathering of over 50 vintage and classic tractors, supported by vintage cars and commercial vehicles, including one 94 year Sentinel DG6 steam wagon of Jim Hatfield from Lewes, waiting to board the midnight ferry to Dieppe, France.
These vehicles, plus their drivers and crews, were on their way to a racecourse near the town of Gournay-en-Bray in Normandy where the biennial show celebrating a French farming and rural crafts was to be held.
It was all part of a well organised event by the Chailey Classic & Vintage Tractor Club to visit their French counterparts “Passion Tracteurs Collection’ of Gournay-en-Bray, a town that is twinned with Hailsham in East Sussex.
As the result of a meeting held in Gournay-enBray in 2018, a bond of friendship had grown between CCVTC members and the Normandy towns in the area that still remember, with grateful thanks, their liberation following the D-Day landings in June 1944.
The group was organised into two separate convoys and the route from Dieppe took the vehicles through Neufchatel, thereafter stopping for a formal lunch in the livestock market of Forges-Les-Eaux (twinned with Heathfield, East Sussex) where the group was formally greeted by
It was a pleasure to be at the second David and Peter Ingall preservation downsizing sale on Saturday 29 June, staged by Cheffins at Manor Park Farms, Rand, Market Rasen, Lincolnshire. We have been here before and that was 12 years ago now. Time does fly when you are having fun!
There was an excellent atmosphere to this well conducted sale, held in just about the right weather conditions. The stock featured an eclectic mix of just about everything and the Manor Park Farms team had things laid out well. The tractors flew out the door so well with strong prices throughout, the Roadless DG4 half-track grade 2/4 did well here at £10,000 and the Ford and Fordsons were just hot particularly the Dexta’s which have been very much up and down over the last few years the last two here
Tractors ready to be loaded at Newhaven
the town’s Mayor and dignitaries.
Following speeches and the exchange of gifts, the convoy moved off en mass with Police escort to its final destination. On arrival in Gournay-enBray, the British contingent drove through the town to cheers and flag waving and was received by the town’s Mayor and his dignitaries. The reception was something not to forget. A minibus was sponsored and provided by David Chewter of Parkers of Haywards Heath to ferry members and guests between the racecourse and the town throughout the weekend.
On the Saturday evening, the PTC a French tractor club provided a communal evening meal for all involved and throughout the weekend English and French produce was exchanged in equal measure. CCVTC, thanks to its local sponsors, Harveys and Longman Breweries, Bluebell Vineyard, Southdown Cider and High Weald Dairy, took across fine
£50,000
averaging £10,000 between them.
The best in the line of 10 series was the 1988 7610 Series II four-wheel drive, E478FWC with Super Q cab grade 3 at £31,000 in clean original style. But the top prices went to the grade 11 Massey Fergusons with the 1996 372 four-wheel drive N446TJS with Trima 1090 Pro front loader and 1,934 hours selling for £34,000. As for the similar grade 1995 390T two-wheel drive M652TAJ with 18-speed transmission and 2,692 hours in ‘mint’ condition it sold for £50,000 that’s £22,000 more than the last one in this condition sold. An amazing price when you get down to it. It just shows investing in tractors pays off.
Wow! Have you ever seen a 1971 Bi-Som-Trac before? Well here is the only one left!
English beer, sparkling and still wine, cider and cheese, all of which went down very well with the French.
The weekend was well attended by many from the Normandy farming community, who celebrated its history, featuring demonstrations of some of the oldest methods of farming. Normandy remains a very significant area for agriculture and the British presence contributed to a collection of some 500 vintage and classic tractors and associated machinery.
The British lines had its own marquee and significant area, British machines and living vans were displayed accordingly and to the delight of many, a narrow gauge steam railway was set up and operated by its own dedicated team of steam enthusiasts.
We thank Ian Stevens and Adrian Vaughan for the pictures.
WHAT’S NEW
A host of updates are available across Kverneland’s Siloking feeder range, including a new range of batterypowered eTrucks, a stepless auger gearbox on trailed models and the ability to run self-propelled diesel models on HVO fuel (Hydrotreated Vegetable Oil).
This second generation of Siloking eTruck models now includes capacities from 12-20 cubic metres, and unlike its predecessor, the latest range has been designed from the outset around a robust, high-tech 20 cube model.
The revised design concept is said to make it easier to produce smaller eTruck models, using the same engineering featured in the range-topping 20 cube machine, rather than upscaling a 12 cube model into larger capacity versions.
With a high-tech approach, the eTruck sheds its former lead-acid battery power in favour of advanced battery technology with lithium ion phosphorous cells, creating a 96 volt battery-electric vehicle (BEV). This advanced BEV technology affords low-noise, zero-
MORE SILOKING FEEDING OPTIONS
emission feeding that can deliver from two to four mixings without recharging, and offer a projected battery life of 3,000-5,000 full charge cycles.
The eTruck uses Siloking’s 4.0 SelfLine cab, though centrally mounted at the front of the eTruck chassis. Prices start at £188,000 for the 12 cubic metre capacity eTruck 2012.
High capacity TrailedLine mixers, which offer twin and triple auger designs, are available with Variospeed – a stepless gearbox that is said to require less horsepower to drive and need a lower start-up torque to engage. It is a development that allows larger capacity mixers to be operated without the need for ever more
powerful tractors.
Three pre-defined auger speeds can be selected to suit cutting, mixing and emptying, with push-button control available, along with remote activation from the telehandler used for loading. The benefits of Variospeed can include reduced fuel consumption, easier speed changes for enhanced mixing efficiency, plus lower driveline vibration.
Working with its engine supplier, Siloking has thoroughly tested and approved the use of HVO fuel in its self-propelled feeder wagons. Compared to diesel, HVO has been proven to reduce CO2 emissions by up to 90% and can be used as a direct replacement to fossil diesel.
PREMIUM PERFORMANCE
The Jumbo sees Pöttinger offer a high-performance loader wagon with maximum output, high efficiency, outstanding reliability and the highest level of operating convenience. To meet a wide range of expectations in the field, the high performance Jumbo series has been extended. Introducing the Jumbo 7000 and 8000's younger sibling: a compact loader wagon with proven technology. This loader wagon combines all the key performance features in just one machine and is an all-rounder that covers many application scenarios.
CLEAN AND TIDY CROP COLLECTION
One of the greatest challenges ensured by the JUMBO 5000 is collecting the crop cleanly and tidily in all operating conditions. It is able to do this thanks to the six row all-rounder pick-up with an effective width of 1,890mm and the 7 row Profi pick-up with a DIN width of 2,350mm. Both pick-ups are controlled from both ends by a steel cam track. Their tines are slightly trailing, which prevents them from digging into the ground and damaging the sward. The jockey wheels on each side form a stable support triangle together with the optional jockey wheel chassis. The floating pick-up has a freedom of movement of 170mm at the jockey wheel so that it can compensate for bumps and deliver perfect ground tracking.
The central component of the Jumbo 5000 is the loading rotor with its optimised tine geometry and a tine thickness of 10mm. The loading rotor has a diameter of 800mm and thanks to the helix 8 row tine arrangement, it can actively feed the forage smoothly through the chopping system. With a width of 1,580mm, the rotor on the Jumbo 5000 is particularly effective. The loading rotor transfers the forage from the pick-up smoothly, even when the crop is wet and short. This adds durability and ensures an extended service life.
STAY SHARP
Short-chopped forage is not only beneficial for feeding ruminants, it can also be compacted effectively and efficiently in the clamp. Thanks to the Powercut short-chop chopping system with 45 knives, the forage
is cut to just 34mm in length. The knives are all individually protected against foreign objects, which prevents inefficient downtime. The Easy Move swing-out knife bank makes it easy to change and reverse the knives while maintaining an ergonomic posture.
Only really sharp knives can guarantee optimum chopping quality, lower power consumption and increased output. The optional Autocut knife sharpening system with its electro-hydraulic drive system is a convenient way of automatically sharpening the knives, directly on the loader wagon.
LARGE CHOICE OF MODELS
The Jumbo is a multipurpose loader wagon that combines the tasks of crop collection, chopping, compaction and transport, all in one machine. The Jumbo 5000 is available with DIN load capacities between 32m3 and 54m3. The movable front panel is standard, offers an additional load capacity of 4.3m3 with the same wagon length, and makes the loader wagon more compact. The front panel also improves manoeuvrability in small fields and on narrow farm tracks.
The automatic loading system is fitted as standard to provide a high level of assistance by ensuring optimum compaction and filling the loading chamber right up.
The Jumbo 5000 is also available as a DB (Discharge Beater) model with drive system and two or three beater rotors for loosening the harvested material and unloading it evenly.
PINPOINT ACCURACY FOR CROP TREATMENTS
Timing of crop protection treatments is critical if they are to be safe and effective – and a new addition to the Sencrop weather app can help farmers ensure pinpoint applications.
Clearly, wind speed is critical when applying sprays, but so are humidity, temperature and rainfall. The optimum conditions vary according to the type of product being applied. That’s why the new app module allows users to select from fungicides; insecticides; foliar, root or contact herbicides; and even bio-solutions. It then provides specific recommendations tailored to each type of product, and identifies the most appropriate windows for treatment based on a highly localised four-day forecast.
“We tested the app with farmers throughout 2023 and tailored it to make it as accurate and easy to use as possible,”
said Mark Herriman at Sencrop. “It's difficult for farmers to take into account so many meteorological parameters – but applying products at exactly the right time will improve efficiencies, reduce waste and benefit the crop, ultimately boosting the bottom line.”
So how does it work? Through the Sencrop app, users can view their fields and crops, and select the area of interest. They then choose the type of product they want to apply, and the app will generate hourly weather forecasts for the next four days, allowing easy identification of optimal, suboptimal or unfavourable conditions.
The treatment windows are based on precise application conditions, derived from technical institute trials and product regulations, while the ultra-local weather forecasts rely on Sencrop’s connected weather stations and aggregated data from
existing weather models.
“Weather conditions easily vary from one plot to another, even over short distances,” said Mr Herriman. “Our connected weather stations, of which there are now 2,870 in the UK, transmit temperature, humidity, wind speed, and accumulated rainfall, allowing real-time monitoring of your farm conditions.
“When it comes to forecasts, we compare the data collected by the station with the main existing weather models and then aggregate the most reliable forecasts for the chosen location. These forecasts continuously evolve as the station records local weather data, providing the best predictions at all times,” he adds.
“This new functionality also includes a view for agronomic advisers, allowing them to easily and effectively track their farmers' plots and assist them in decision-making.”
EQUIPPING AGCO’S FUTURE
Trelleborg Tyres, a global tyre industry leader, is excited to announce its collaboration with Moreton Morrel College. This partnership aims to equip AGCO apprentices across the UK with essential tyre knowledge.
AGCO, a key strategic partner of Trelleborg Tyres, is integral to this initiative. The collaboration reinforces AGCO’s innovative approach in agriculture and actively promotes Trelleborg Tyres’ commitment to fostering skilled professionals.
Under the guidance of Trelleborg Tyres' experts, Bruce Lauder, Sales Director, and Jimmy Jones, Technical Manager, AGCO apprentices joined an intensive one-day course spanning from tyre basics, correct tyre choice, soil protection, to tyre inflation systems, track construction and markings, tyre alignment, issue identification and tyre fitting.
The apprentices also had the opportunity to apply their classroom learnings in practical scenarios, which deepened their understanding and expertise.
"This collaboration reflects our unwavering commitment to nurturing future agricultural professionals," added Bruce
Lauder, Sales Director at Yokohama TWS UK. "By providing AGCO apprentices with comprehensive tyre knowledge, we enable them to make informed decisions and contribute significantly to the advancement of the agricultural sector.”
Moreton Morrel College, renowned for its excellence in agricultural education, warmly embraced this collaboration as a valuable addition to its curriculum. Andy Southerton, Lecturer in Land Based Engineering at Moreton Morrell College commented: “Our partnership with Trelleborg Tyres enhances our dedication to delivering practical, industry-relevant training. We are thrilled to offer AGCO apprentices access to Trelleborg Tyres' expertise, preparing them for successful careers in agriculture."
WHAT’S NEW
CLAAS CELEBRATES HALF A MILLION COMBINE HARVESTERS
Claas is celebrating half a million combine harvesters built since 1936and is producing several anniversary machines from Lexion, Trion, Evion and Dominator at three locations on three continents. These will be on display at trade fairs, field days and demonstrations in the coming weeks and months.
EUROPEAN PIONEER OF COMBINE HARVESTER PRODUCTION
Claas has been one of the key pacesetters in combine harvester development for many decades. From 1936 onwards, the Harsewinkel, Germany based family company rationalised grain harvesting in Europe with the mowing-threshing-binder with the cross-flow principle, or M.D.B. for short. The great success finally came in 1946 with the Super series, which from 1953 could also be delivered with add-on engines and from 1958 as the Super Automatic with a hydraulic cutting unit drive. More than 60,000 units of the Super were marketed worldwide and even found buyers in Canada and Uruguay.
In 1953, the family company successfully entered the self-propelled combine harvester segment with the Hercules, which was later renamed SF. In 1961, the Matador Gigant set new standards with a cutting bar width of up to 6.0m. Other industry-defining milestones of the 1960s included well-known
names such as Senator, Comet, Cosmos, Corsar, Mercator, Protector and Compact.
In 1972, the Dominator series opened a new era that has lasted more than 50 years. Claas consolidated its status as the European market leader, particularly with the Dominator 6 and Dominator 8 series, and introduced innovations such as 3D cleaning, the Auto Contour cutting unit guidance and the Mega threshing unit. The Dominator CS with cylinder separation (Commandor CS from 1986) presented in 1981 were among the most powerful combine harvesters in the world at the time, and were first delivered with rubber tracks from 1987 onwards.
At Agritechnica 1995, the Lexion 480 with groundbreaking APS hybrid technology was not only the highlight of the trade fair, but also a game changer in terms of performance, comfort and groundbreaking electronic applications for the emerging precision farming era. Since 1997, the ground-protecting Terra Trac chassis technology on the Lexion – also available for the Trion since 2021 – has been celebrating its worldwide triumph.
A huge step in the area of machine intelligence followed in 2013: With Cemos, Claas has since become a leader in the field of combine harvester automation, which has been underpinned by numerous international awards. Cemos continues to be continuously developed and expanded to include additional processes and units in combine harvesters and attachments.
The latest members of the Claas combine harvester family are the Trion and Evion series presented in 2021 and 2023. Together with the Lexion, they offer a unique range of products and equipment from the 205hp five-walker to the 790hp flagship Lexion 8900 Terra Trac with APS Synflow Hybrid. All three series enable a further increase in threshing efficiency thanks to the Dynamic POWE engine management system and expanded Cemos functions. Depending on the requirements profile, an enormous range of cutting units are available – from the conventional auger cutting unit to ultra-modern, automated Vario cutting units through to the Convio Flex Draper with a flexible knife bar and flip-over reel control.
MORE THAN 500,000 SUCCESS STORIES
With around 100,000 and more than 75,000 units respectively, Dominator and Lexion account for the largest share of the 500,000 Claas combine harvesters built to date. Super and Super Automatic (approx. 65,000 units) as well as Europa and Columbus (together approx. 60,000 combine harvesters) and the Tucano (approx. 35,000 units) also contributed significant numbers to the global success of Claas combine harvesters. But series built in smaller numbers, such as the Commandor Terra Trac, were also drivers of progress and have had a significant impact on the genetics of today's Claas combine harvesters.
WHAT’S NEW
AUTOMATION, ASSISTANCE AND DATA MANAGEMENT
The fact that threshing performance has increased since the first European combine harvester, the M.D.B., is not only due to further developments in hardware and higher engine performance. Over the last 25 years in particular, automation has become an increasingly important part of further optimisation in the areas of efficiency, productivity and work results. With the introduction of the throughput control device in 1974, Claas began integrating electronic operating aids into combine harvesters. The Cemos, which was introduced in 2013 and has since won several awards at international trade fairs such as Agritechnica and SIMA, then proved to be a real game changer: to this day, it has been continuously expanded to include further processes in the combine harvester and on the cutting unit, enabling optimal utilisation of the machine with a full focus on maximum harvesting performance
– supported thanks to the unique multi-crop suitability of all Claas combine harvesters.
CLAAS was also one of the pioneers in combine harvester construction for precision farming applications. From 1991, yield data and GPS position data could be linked with one another - and from 1996, the Lexion even offered yield mapping via Agrocom Map followed in 1998 by telemetry-based fleet management via Combine Online. In 2005, Lexion combine harvesters were the first Claas products to be equipped with the groundbreaking Telematics. From October 2024, the digital networking of Claas combine harvesters with the rest of the fleet, operations management and the Claas service and sales partner will take place in the new Claas connect, opening a new chapter in the area of digital machine and farm management.
To mark the anniversary, a limited number of Evion, Trion and Lexion were built in a special paint finish and with extensive decals.
ANNIVERSARY MACHINES
Several anniversary machines have been and are being built with a special look. The Lexion, Trion, Evion and Dominator will be on display at various national and international trade fairs as well as at field days and in demo use in the coming weeks and months. The design is a homage to the Claas combine harvester product history: The silver metallic colour represents the beginnings of Claas combine harvester production up to 1961, the seed green metallic represents the well-known Claas colour scheme introduced in 1966 with the Senator. Knotting pattern in the Claas letters on both sides of the anniversary machines reference the old Claas shape logo with the Claas knotter hook – the first Claas patent from 1921.
For the 2025 harvest season, customers can order a sales variant with an anniversary silhouette on the side flaps and special feature packages.
Experience precision farming like never before with the introduction of E-Services for TopDown and Opus.
Now these machines can seamlessly utilise prescription maps for automatic, in field machine adjustments.
Alternatively, with a touch of a button the driver can dynamically adjust the working depth or intensity of the discs, tines, levellers or packer while in operation.
INNOVATIVE NEW PRODUCTS
For the new season, grassland specialist Pöttinger once again has a colourful bouquet of interesting and innovative new products at the start.
NEW FRONT MOWERS: NOVACAT F
The Austrian agricultural machinery manufacturer Pöttinger is well-known for its expertise in grassland farming. Careful mowing forms the basis for high quality forage. The new Novacat F front mowers enable smooth and cost effective mowing. The mowers are available with working widths of 2.62m or 3.04m.
FOCUS ON COST EFFECTIVENESS
The Novacat F series combines low weight with maximum strength. Thanks to the compact three-point linkage mounted headstock, the centre of gravity is close to the tractor, making it easy to use even with small tractors. The mower also handles extremely well on steep terrain.
BEST CHOPPING QUALITY
The heart of the Novacat F is the cutter bar, proven over thousands of cuts in
the field. The cutter bar is just 4cm high to guarantee optimum crop flow. And because it is only 28cm deep, it delivers the best ground tracking. Gimbals on the cutter bar guide arms guarantee multidimensional freedom of movement. The arc of movement of +/- 8 degrees allows the mower to float precisely over all undulations in the ground. The weight of the mower is carried either by the tractor hitch, or optionally by two strong suspension springs between the headstock
of the mower and the mounting bracket on the tractor.
CONVENIENT AND SAFE
The side guards are folded upwards for safe road transport, and hydraulic folding is available as an option because the guards fold well away, optimum access is provided to the cutter bar. This makes it possible to clean the machine thoroughly and change blades quickly and easily.
Pöttinger's Novacat F front mowers offer
a combination of cost effectiveness, the best cutting quality and convenience to meet farmers' highest expectations.
NEW: NOVACAT F 3100 OPTICURVE
Now the grassland specialist has launched a new technology featuring automatic curved side shifting on the Novacat F 3100: This side shift system on the front mower guarantees a perfect overlap with the rear mower and ensures the tractor drives along a clear track, free of forage, when cornering and working on steep ground. The curved movement means that the entire working width of the cutter bar can be used and the effective width of the mower combination maximized. Systems with straight-line side shift leave several centimetres uncovered.
CLEAN AND TIDY CUT
Even if the tractor drifts sideways when cornering or on steep terrain, the rear tyre of the tractor does not run over grass that has not been cut yet because the mower shifts towards the inner radius of the curve. What is more, no forage is left behind because the front mower overlaps perfectly with the rear mower.
NOVACAT H: NEW MOWER COMBINATIONS
Agriculture requires efficiency and sustainability more than ever before. To meet this demand, Pöttinger is launching the Novacat H mower combinations that deliver impressively high output while saving on fuel consumption. The Novacat H 9500 with a working width of 9.46m and Novacat H 11200 with a working width of 11.14m set new standards in modern grassland farming.
COST EFFECTIVE AND EFFICIENT
The strong construction of these mower combinations is what makes them stand out. Weighing 2,040kg, the Novacat H 11200 can be powered by a tractor with just 160hp. The smaller Novacat H 9500 only needs 130hp. It is this efficiency that makes Novacat H mower combinations a cost effective workhorse on the farm.
THE BEST CUTTING QUALITY
The centre pivot mounting on the cutter bars provides a travel of +/- 22.5° for perfect ground tracking. Hydraulic weight alleviation ensures uniform pressure to the ground across the whole width of the cutter bar, so that the best cutting quality is always achieved.
RELIABILITY AND ROBUSTNESS
Mowers made by Pöttinger are known for their robustness. All drive elements are oversized and the central T-gearbox, together with the long cardan shafts, ensures reliable power transmission and smooth operation. If the mower collides with any obstacles, the cutter bar can fold back to the rear. It is pivoted back into the working position by activating the spool valve. This increases the service life of the machine and guarantees a high level of reliability.
CONVENIENCE AND OPERATOR FRIENDLINESS
Pöttinger mower combinations offer a high level of convenience and operator friendliness. The mower units can be lifted either together or separately. Lifting separately is done either by a shared spool valve with selection using
the Basic Control terminal, or by two separate spool valves. For transport, the mower combination is folded backward hydraulically while the guards are folded up automatically. This ensures a narrow transport width of just 2.20m, making transport easy while enhancing safety on the road. The length of the folded mower combination is comparable with a 5-share plough.
The large folding guards also ensure optimum accessibility to the cutter bar, so that the machine is easy to clean and the blades can be changed quickly and easily. Novacat H mower combinations ensure the best cutting quality and clean forage. Because they save on fuel consumption, these machines are the ideal partners for every grassland application in terms of cost effectiveness.
EUROCAT F: NEW FRONT DRUM MOWERS
A lot of updates in the extensive range of mowers has been happening with the drum mowers. The Eurocat F front mowers see Pöttinger offer particularly smooth running and cost effective solutions. The working widths on the new models are 2.70m and 3.05m.
John Deere has seen an influx of applications to its Military Hiring Programme after hosting a bespoke event for service leavers involving dealers from across the UK.
Held at the company’s UK headquarters in Langar, Nottinghamshire, the event gave armed forces personnel the chance to have detailed discussions about what the next stage of their career could look like working with one the world’s biggest machinery manufacturers.
The ground-breaking resettlement programme for military service personnel offers new career opportunities working on some of the world’s most advanced agricultural and professional groundscare products.
Members of the armed forces have been identified as ideal candidates to bring their unique skill sets and experience to technician roles within UK and Ireland dealerships as many have already worked with systems and products similar to those used by John Deere.
Those who enrol onto the programme are put into contact with an individual from the John Deere network who have resettled
SHINING A LIGHT ON MACHINERY CAREERS
themselves, who will guide them through the next steps which includes free training courses before finding employment with a John Deere dealer.
The event drew a positive number of applications to the Military Hiring Programme, with 23 ex-servicemen now waiting for the next step to start their new career with John Deere.
The Military Hiring Programme has drawn interest from across the country, with attendees travelling from not just the surrounding Midlands, but also from as far as Cornwall and Scotland.
As well as dealers and staff, attendees also had the opportunity to listen to those who had been through the Military Hiring Programme themselves and were now a part of the dealership network. Ex-servicemen
Martin Frodsham, Will Foster and Mike Rogers spoke about their journey and what their career has been like since leaving the armed forces and becoming technicians.
Attendees also heard from John Deere instructors who showed them the machines that they would be working on should they apply to join John Deere, with a focus on precision agriculture and what the future looks like for agricultural technology.
The event was supported by ten John Deere dealers, including Thomas Sheriff, Cornthwaite Group, Ripon Farm Services, Ben Burgess, Tuckwells, Farol, Tallis Amos Group, Hunt Forest Group, Smallridge Bros, and Masons Kings.
Interested service members and ex-service members can apply to the Military Hiring Programme at any time online by visiting www.deere.com/JDMH.
Disco large-scale mowers from Claas have been making their mark in the professional forage harvesting sector on large farms and for contracting work for 25 years. Today, the Claas product range includes more than 15 triple mower combinations with working widths from 8.30m to 10.70m. The five new models from Claas offer even more performance, greater wear protection and enhanced operator comfort to meet the exacting needs of tomorrow's farms.
DISCO 8500 C / RC TREND
With the launch of the two new entry models – the Disco 8500 C Trend and Disco 8500 RC Trend – Claas has brought tried and tested features of the larger models to the smaller working widths. Tractors in the lower mid-range with a short wheelbase and engine outputs from 160hp are often used in this segment, which places special requirements on the mowing equipment. When developing the new Disco 8500 Trend, the focus therefore lay on a stable lightweight construction with a centre of gravity close to the tractor and a low rotational and tractive power requirement. With this in mind, the basic specification includes the proven, extremely robust telescopic arm concept with optimised centre of gravity, Active Float ground pressure adjustment actuated from the cab and the fast-acting mechanical non-stop collision protection whereby the arm pivots up and over obstacles before automatically resetting. In addition, the low-speed concept on the
NEW DESIGN AND INNOVATIVE FEATURES
MAX CUT mower bed enables the mower to be operated at 850 rpm; the optimal, fuel-efficient torque characteristics for the tractor. On top of that, it features state-ofthe-art drive technology with individual drive protection for each mowing unit and the latest bolted Walterscheid overload clutches.
Working closely with farmers and contractors, Claas design engineers have come up with some impressive features for the two large-scale mowers with tine conditioner (C) or roller conditioner (RC). Hardox-reinforcement of the conditioner plate has made it even more resistant to wear and stone chips while providing an additional weight saving. Doing away with the LS hydraulic blocks and hydraulic collision protection has achieved further weight savings and significantly reduced the purchase costs for this mower class. At the same time, an efficient powertrain with protection on both sides comes as standard.
The new Disco 8500 C Trend was specially developed for tractors in the lower mid-range, and its power and centre of gravity have been optimised accordingly.
Furthermore, as an option, the Disco 8500 RC Trend with roller conditioner can be fitted with the double roller drive with innovative scissor gear unit – first introduced in the Disco 9700 RC Auto Swather in 2023. This feature enables maximum throughput and service life
even under demanding conditions in crops with high to very high growth.
Operation and the individual lift function are controlled conveniently and efficiently via the two tractor spool valves. Operation is even easier when integrated into the tractor's existing headland management system.
DISCO 9300 C COMFORT AND RC COMFORT
From now on, Claas has placed the Disco 9300 C Comfort and 9300 RC Comfort above the Disco 8500 series. Thanks to the frame with optimised centre of gravity, with arms inclined to the rear, and the low-engine speed concept with reduced pto start-up speed of 850rpm, it is now possible to harvest powerfully and efficiently with the added benefit of conditioning using a lighter fourcylinder tractor from 180hp. Furthermore, the V-shaped steel tines on the Disco 9300 C Comfort are designed to ensure even higher throughputs at reduced fuel consumption.
The new Disco 9300 C Comfort also features Hardox-reinforced conditioning plates for maximum durability. Conditioning intensity and deposition width are easy to adjust.
The Disco 9300 RC Comfort has a highefficiency roller conditioner for harvesting alfalfa or other leafy crops like millet, which, like the new Disco 8500 RC Trend, can be optionally equipped with the double roller
drive with innovative scissor gear unit first introduced in 2023. Longer swathing plates are also available to lay the crop in the narrowest possible swath. Markets which produce large quantities of premium-quality alfalfa hay have specifically requested compact swath laying. Apart from ensuring low harvest losses, a key quality criterion here is to retain the green colour of the forage by reducing bleaching.
The new Disco 9300 C/RC Comfort offer exceptional operator comfort, especially in terms of hydraulic functions. The RC version is optionally available with the innovative double roller drive with scissor gear unit. A huge advantage of the Comfort equipment is the optional automatic control of the Active Float system. When working on slopes, the ground pressure – a key factor determining forage quality, sward protection, power requirement and slope safety – can be individually adjusted on each side using the optional automatic slope system. This additional convenience eases the driver's workload and ensures consistently high results at all times. Additional functions controlled by Isobus include individual lifting of the telescopic arms and optional hydraulic protective cover folding.
DISCO 1100 COMFORT
The new Disco 1100 Comfort uniquely combines a large working width with compact transport dimensions. The working width has been extended to 10.80m by increasing the arm's adjustment range by 10cm. The working width can be infinitely reduced hydraulically to 9.60m, and the two arms can be adjusted independently or synchronously. In combination with the Disco 3600 front mower, this ensures optimal overlap at all times on tight bends or when working on slopes.
Despite the two 3.80m wide mower units, the mower folds to a height of less than 4.00m for road transport.
The new Disco 1100 Comfort with a 10.90m working width has been added to the Disco range in some countries.
Operation couldn't be simpler thanks to the familiar Comfort hydraulic controls from
the Disco 9700 and 1010; no separate control unit is needed. Lifting and lowering of the arms and adjustment of the working width are controlled hydraulically, or automatically using the programmable headland management system, while hydraulic protective cover folding and Active Float ground pressure can be conveniently controlled either by the programmable F keys on the CMotion control lever or by Isobus. The automatic slope control function is optionally available for convenient adjustment of Active Float ground pressure and arm position.
MAX CUT
As with all Disco mowers, the proven Max Cut mower bed with quick-knife change and Active Float suspension are responsible for the outstanding cutting performance. Both features have proven their worth over
many years and tens of thousands of Disco mowers, delivering clean forage, maximum sward protection and outstanding capabilities combined with high cutting frequency at reduced pto speed for optimum efficiency.
Flow-optimised wear skids for a 7cm to 9cm cut height reduce crude ash contamination and accelerate regrowth. This feature has the added benefit of further reducing tractive power requirement and diesel consumption.
Max Cut stands for ultimate reliability and durability. So all mowing discs are equipped with four wear protection studs as standard for a double service life. All knife holders have a high-quality tungsten carbide coating on the underside, something normally seen only in tillage implements. The mower bed oil filling is designed for durability – and so reduces maintenance and costs.
48
NEW TWIN ROTOR RAKES DELIVER TOP RESULTS
At Pöttinger, the focus during development is always on the quality of the forage, conservation of the soil, and the durability of the machine. The company is setting new standards in this area with the launch of the new Top VT 6820 S and Top VT 7620 S twin rotor rakes with side swath placement. Despite their low power requirement, the new rakes are designed to rake large swaths and deliver the best results. The Top VT 6820 S achieves a working width of 6.80m, while on the Top VT 7620 it’s an impressive 7.60m.
EFFICIENT AND NEAT WORK
The angled tines lift the crop slightly to ensure it is swept cleanly without dragging the forage across the ground. The standard five wheel chassis in combination with the rotor mounted in gimbals ensures precision guidance of the tines over bumpy ground. As an option, a Multitast jockey wheel can be added to detect bumps ahead of the tines and lift the rotor accordingly. The raking height can be conveniently adjusted electro-hydraulically from the tractor cab, or manually using a hand crank. Likewise, the optional Multitast jockey wheel is
adjusted automatically with the rotor chassis. Optional suspension springs also make sure that the rotors run smoothly in the working position.
VERSATILITY IN ACTION
Thanks to the dual swath function, night swaths can be formed and the machines can be used to rake hay and straw. This flexibility makes it possible to adapt to different harvesting conditions and always achieve the best results.
CONVENIENT OPERATION AND HIGH MANOEUVRABILITY
One double-acting connection to the tractor hydraulics with float setting is all that is needed for lifting the rotors. Both rotors are lifted and lowered one after the other via step sequence control. Thanks to the Basicline preselect system, the
rotor units can also be lifted or lowered individually, which is particularly practical for leftover areas and raking along field boundaries.
The Top rakes also impress with their excellent manoeuvrability: The steered chassis enables a turning angle of 80° so that the rake follows exactly in the tractor's tracks. With a ground clearance of 50cm, there is no problem driving over swaths. For a comfortable and safe ride during transport, the swath curtain folds in automatically, and the transport height remains under 4m, all without having to leave the cab.
Pöttinger, the grassland specialist, attaches great importance to the best ground tracking and gentle forage handling. The new Top VT 6820 S and Top VT 7620 S rakes are the top choice for efficient and successful harvesting.
CELEBRATING HARD WORK AND DEDICATION
This baling season Tama, the world’s largest manufacturer of crop baling products, has launched a new campaign to celebrate the hard work and dedication UK farmers and contractors make every year to help feed our country.
“The idea behind the campaign is simple, we want to give recognition to the country’s hard working farmers and contractors,” said Tama UK Commercial Manager, Warren Tatton. “These guys and girls work tirelessly, year on year, to feed the country and all that hard work, so often, goes unrecognised, rarely is a ‘thankyou’ or ‘good job’ heard. We want them to know people are watching and we appreciate all that they do,
and we think they are doing an amazing job.”
SEARCHING FOR THE BEST BALES
Tama’s experts are always out and about across the country assisting customers to get the most out of their balers. This year, as part of this campaign they will also be keeping an eye out for the very best bales, and when they find a field of amazing bales the entire Tama family will be saying ‘great job, well done’ –simply because not enough people do.
THIS SEASON: CHECK YOUR BALES
With no sales push and no hidden agenda involved, Tama simply want to recognise a job well done and provide a reward of a few
beers for the hard-working farmers and contractors of the UK. Something they can share with friends and family confident in the knowledge they are one of the UK’s Star Balers.
So, this is a call out to all balers in the UK; keep an eye on your bales, look for one of Tama’s ‘Stars’ and simply follow the instructions you’ll find on that star, to receive a reward from Tama for a job well done.
GET THE LATEST CLUES
Follow Tama on Facebook for clues as to where their team have been and where the latest ‘stars’ might have been placed. A nice surprise might be waiting for you in the field.
NEW AIRBAG TECHNOLOGY
Leading manufacturer of protective seat covers, Town & Country Covers, has revealed its latest exciting product, a seat cover with new and innovative air bag compliant technology.
Designed to fit almost any vehicle, Town & Country Covers has a new seat cover that has been meticulously designed over three years to fit single seats in modern cars and vans, while offering unrivalled protection for the seat, as well as the driver.
These new covers incorporate innovative technology and come with an airbag seam that allows the airbag to deploy, on either side of the seat. This solution has been rigorously tested to stringent standards at leading facilities to ensure it meets Town & Country Covers’ extremely high safety standards, so drivers can have peace of mind that their airbag will deploy through the seat cover, without delay.
There are other methods used in seat covers to allow for airbag deployment. The most common is to simply leave an opening for the airbag to deploy, but this can affect the fit and leaves areas of the seat unprotected. Other methods are often untested and are not subject to
the same quality checks that are undertaken by Town & County Covers. They quality check their seams to ensure they are only selling the safest and highest quality products.
Naturally, this new seat cover is designed in house, as are all of the other seat covers in the Town & Country Covers range, and has extra panels on the sides to give it a more natural-looking fit. This 360° protection means every part of the seat is safe from spills, food stains, pet hair, oil, grease, scratches, and general wear and tear.
As would be expected from a company with such pedigree, Town & Country Covers prides itself on sourcing high quality materials for all its products. Its signature polyester blend is the perfect balance of style, comfort, and toughness, which is guaranteed to add years to the life of any seat and this can be expected in this new product.
Designed with the driver in mind, Town & Country Covers ensures its covers are easy to fit, therefore this new seat cover has an elasticated hem and fastenings that secure under the seat to ensure the cover stays in place and can be fitted in a matter of minutes.
WRI GHT SB RO KE RS ER VI CE
The safe and reliable way to buy and sell machinery and equipment
Wrights Farming Register offers farmers and contractors a uniqueservice through its team of brokers. They are the ‘men in the middle’ who give an impartial opinion on the items of machinery they handle on behalf of their clients. The brokers, who currently cover an area stretching fromthe Scottish borders to the South Coast, can save farmers time and money when it comes to buying or selling anything from acombine harvester to a cattle trough. In these security-consciousdays, they also provide adiscreet alternative to apublic farm dispersal sale and can help farmersavoid the tax pitfallsthese can cause.
Shaun van den Bos
Tel: 01652 618221
Mob: 07850 978188
shaunvandenbos@gmail com
www shaunvandenbos co uk
Robin Sparrow Tel: 07831 886601
robinsparrow@btinternet com
CONDITIONS CATEGORIES
EXCELLENT Full workingorder,bright andundamaged paintwork, low usagefor year
VERY GOOD Mechanically sound, will go straight to work,little wear for year
GOOD Clean and tidy,mechanicallygood, mayrequireservice or minimal repair
AVERAGE Complete unless stated,normal wear andtearfor age, mayneed somerepairs. Thedescriptions areprovided as aguide only and relate to machine condition when inspected by the broker
AUGERS
S10394 IDEAL MAYRATH 6INCH
Transmatic Auger, on trolley, single wheel each end. C\w 3 phase motorand bottom guard. Appx28FTlong Good Condition
£450 %$Shaun 07850$978188
S10430 6INCH TRANSMATIC Grain auger appx46feet long with Carriagefitted with castorwheels and 3phase motor Good Condition %$Shaun 07850$978188
S10457 2017 ASTWELL 6 - 35 6Inch 35ftlong grain auger, PTOdriven transmatic type with pristine spoutand bottom cage.2standardwheels. Perfect Excellent Condition £2700 %$Shaun 07850$978188
BALERS &BALE HANDLING
RS1597 BLACKSMITH BALE
SPIKE Single bale spiketofit Manitou (Located Nr Kenilworth) Good Condition £350 %$Robin 07831$886601
RS1603 2006 MASSEY FERGUSON 139 SB BALER
Central 1.9mt Pick Up.Twin Auger
Feed,Bale Chamber 42M X37M, 1000RPM PTO, SedgeHitch. Floating Pick Up with Hydraulic Lift, Full road Lighting,Located Nr Kings Lynn, MorePhotos on request,Transport canbe arranged Very Good Condition £10550 o.n.o. %$Robin$07831 886601
S10409 TRENONA TWIN BALE
Squeezer, 3pole hydraulic grab to pick up 2wrapped bales. FittedEuro8loader brackets. Very Good Condition %$Shaun 07850$978188
S10471 2022 LSMV50F
Free standing 3point linkage Waste material baler,steel tying, poweredbytractor hydraulics and12v system, Will turn waste plastic, cardboardand tyres into saleable bales. New& unused NewCondition %$Shaun 07850$978188
S10473 2004 ORWAK3800 Free standing waste material baler Poweredby3 phase electrics. Notusedlately butOKwhenlast in use AverageCondition £1750 %$Shaun 07850$978188
S10612 RUSSELL FLAT8 Bale grabsfor conventional balesc\w toprams and loader brackets. Stored inside choiceof2 Good Condition £300 each %$Shaun 07850$978188
BEET HARVESTING EQUIPMENT
RS1391 CT M950 RS
WRI GHT SB ROK ER SE
RS1627 1990 MASSEY FERGUSON 38 COMBINE HARVESTER
S10541 INTERNATIONAL BTD6
RS1548 GALUCHIO TWIN PACKER
BeetCleaner Loader With Deutz Diesel engine startsonthe button. Hydraulic Fold, Hopper Extension Double Chain Link cleaner web, Twin Brockeimer unloading web, in usethisautumn Very Good Condition £6500 %$Robin$07831 886601
BUILDINGS/STORES
RS1624 BUILDING EX WORKSHOP
20ftCut Very lowHours’ Valmet Engine,Tyres almost as new, came offaBedfordshiresmall holding,veryLow Hours, Nota scratch on it, It is the Cleanest Combine I’ve seen in years, Runs as sweetasanut,Started on the button after being stood for 5months ExcellentCondition £9500 o.n.o. %$Robin$07831 886601
S10440 1984 JOHN DEERE 1075
All steel frame metalclad
Width 24ft- Length 601ft Hight to Eaves15ft 3/4 Mezzanine Floor,Big 6Roofsheetswithy Zpurlins and corrugated steel sheetcladding,Substantial Steel Stair to 1stfloor Sliding doors, All nowdismantled, Hasbeen used as awork shop.Purchaser to Transport, Morephotoson request,Located Nr Stafford
Good Condition £6000 o.n.o.
%$Robin$07831 886601
S10456 STEEL 72 BY 40 FT I
Section steel building frame with latticeframe roof covered with boxprofile roof sheets on timber and angle iron. (Screwed on with tech screws) 10 inch by 6inch
Stations appx20ft tall.12ftapart
Plus 3Bay lean to on one side 20 ft wide.Buyer to dismantle Good Condition %$Shaun 07850$978188
COMBINE HARVESTING EQUIPMENT
RS1583 MATROC Rape Side Knife to Fit John Deere1166 Combine, notusedfor twoyears,Photoson request,Located TonbridgeKent
Good Condition £750 %$Robin 07831$886601
RS1591 1992 MASSEY FERGUSON 38
14ftcut Combine Harvesterin Good working order fittedStraw chopper and SG2 Air concab Plus Bed Trolley.28.1 -26drive tyres,18inc track grip rears. Recent concaveand feed elevator Rare Iowner driver combine Very Good Condition %$Shaun 07850$978188
S10446 1992 MF 38 20 Ft Cut 6walker high outputcombine only worked 1967 harvest hours(Daniavision monitor still fully operational and showing all systems working OK ) 24.5 -32drivetyres and new 500/60 22.5 rears. StandardD header is very tidy,nostone damageornoticeable wear Very Good Condition %$Shaun 07850$978188
S10491 JT ENGINEERING SIDE
KNIFE Bolt on electric 12v type C\w Framefor John Deere818 header Good Condition £300 %$Shaun 07850$978188
S10534 ZURN 24 FT
Good Condition %$Shaun 07850$978188
combine Harvesterc/w 20ftPowerFlowHeader( Droningberg) Valmet240hp Engine,Tyres 85%good Front 650-75 R32,Rear 500-60 22.5 in good working order used this harvest, locatedNr. Grantham, Morephotosonrequest Good Condition £11000 o.n.o. %$Robin$07831 886601
S10535 CHEVAL 20 FT Rape extension ForNew Holland Combines. FittedZiegler electric rape knives at each end. Good Condition %$Shaun
07850$978188
S10621 1978 NEWHOLLAND
TX66 20ft Cutc\w Air conditioned cab, Nice smart combine only done 2700 hours. Very Good Condition %$Shaun
07850$978188
CRAWLERS &EQUIPMENT
S10522 INTERNATIONAL
BTD6 Crawler Tractorc\w Hydraulics, PTO, Drawbar & lights.(Nolinkage)Repainted and overhauled by RH Crawford &Sons. Very Good Condition %$Shaun07850$978188
Crawler with 12 inch tracks, very good pins &Sprockets. Drawbar and recently covered seat and armrests.Thistractor has been ashowwinner and still has that quality aboutit. Very Good Condition %$Shaun 07850$978188
CULTIVATION EQUIPMENT
RS1458 FARMFORCE FRONT MOUNTED PRESS 3point linkageFurrowPress all rings sound Photosonrequest Good Condition £500 o.n.o. %$Robin 07831$886601
RS1461 GANG ROLLS5MT
Trailed Ring rolls £mt Center &2 1mtPups, LocatedNrSpalding, MorePicturesonrequest
Good Condition £1250 o.n.o.
%$Robin$07831 886601
RS1505 SIMBAXPRESS4.6 MT
Trailed Culti PressFixed Leading tines, 2Rows of Angling Cutaway Discs FollowedbyPressed steel pressureWheels &Hydraulic transport Wheels, In Excellent order,MorePhotosonRequest, LocatedNrLeamingtonSpa Warks, SEEDER UNIT NOT INCLUDED Very Good Condition £12500 o.n.o. %$Robin$07831 886601
RS1546 SIMBATOP TILTH 7-2MT
Seed Bed maker.Front Levelling BoardDouble Row of Pig Tail Spring tinesLargePacker Roller, followedbysingle rowofPig Tails, FollowedbySmaller Packer Roller,Really Good working order, Only used on Fenland, Dry Stored, Forsale due to semi retirement, LocatedNearPeterborough Very Good Condition £8500 o.n.o.
%$Robin$07831 886601
RS1547 SIMBADOUBLE PRESS 3-5MT Front one Rowoffixed Loosener TinesFollowedbyTwin Pressed Steel Packer Rollers Hydraulic Transport Wheels and End TowDrawBar Very Good Condition £4500 %$Robin 07831$886601
ROLLER 5-5MT front Ridged levelling Tines&Twin Cast steel Packer rollersHydraulic Folding &hydraulic transport Wheels, Dry Stored, FenLand Farm. LocatedNr. Peterborough Good Condition £5250 o.n.o. %$Robin 07831$886601
RS1595 SIMBA6MT DOUBLE PRESS
good working order (one broken
Cast Steel Rings, Hydraulic folding and Transport Wheels, In good working order (one broken ring) LocatedSelborneHants) Good Condition £4500 o.n.o. %$Robin$07831 886601
RS1616 SHOTBOLT24F TROLLS
Twenty four inch Rings, Hydraulic Folding and Transport wheel, Rings almost as new, Working this spring,Located Near Newmarket, Transport canbearranged at cost, MorephotosonRequest Good Condition £3750 %$Robin$07831 886601
RS1619 DIABLO24MTROLLS
18” Half Breaker Rings Hydraulic Folding And Transport wheels. MorePhotosonRequest, Located Nr.Newmarket AverageCondition £3500 %$Robin$07831 886601
RS1628 BOMFORD SUPER FLOW
12ftWorking Width 13 Tines StraightTines, reversible Points, Metalwork Sound, Paint Poor, no BreaksorWelds,NoDepth Wheels Good Condition £1150 %$Robin$07831 886601
S10449 2006 KONKSKILDE DELTA
3M Stubble Cultivator with 7 Sprung back legs with points and wide wings. Plus 3pairs of angled discs and 3m Kerner crumbler packer.Done little work Very Good Condition %$Shaun 07850$978188
S10552 EDLINGTON CAMBRIDGE Trailed Rolls, Traditional Mother & Pupswith 10ftCentreand 2of6ft 6ins Rolls all fittedwith good 24 Inch Crimp rolls Good Condition %$Shaun 07850$978188
S10595 BLENCH SPRING TINE 2 Bar front or rear mountable 12ft Wide spring tine cultivator all sound with good tinesand points Good Condition £350 %$Shaun 07850$978188
WRI GHT SB RO KE RS ER VI CE
S10597 BOMFORD SUPERFLOW
8ft wide 3barswith9 standard draft legs with good reversible points and sound frame Good Condition £300 %$Shaun 07850$978188
DE-STONERS
RS1126 2000 NETAGCO REEKIE BEDFORMER
2Row C/wmarkers.all new Metal. Front or Rear Mount With tractororbedtiller,Ready to go to work. MorePhoto’s on request, transportcan be arranged, at cost to be agreed Very Good Condition £1000 o.n.o. %$Robin$07831 886601
DISC HARROWS
RS1544 SIMBASERIES 25-4MT HeavyDutyDiscs Hydraulic Folding Hydraulic transport Wheels, Road Lights,Rear tow hitch, Refurbished twoyears ago, only used on the fen, Sale due to retirement, Dry Stored, LocatedNear Peterborough Good Condition £5250 %$Robin$07831 886601
RS1607 SIMBA 5.5MT SERIES “
Disc harrows hydraulicFold and Transport, Good tyres.30” disc Rear tow hitch plus Rear hydraulic Service, Full Road Lights,dry Stored, offthe FenLocated Nr Crowland, MorePictureson request Good Condition £5550 %$Robin$07831 886601
S10417 GALUCHO 3M Trailed Offset disc harrowswith 21 inch cutawayfrontsand 23 inch cutawayrears.Fitted Rear drawbar and 10/75 -15.3 Tyresontransport wheels
Good Condition %$Shaun 07850$978188
S10575 MF 520 12Ft Trailed X pattern disc harrows, rigid with good 20Inch Scalloped discs on the front and plain inch discs on the back axle.Reardrawbar
Good Condition %$Shaun 07850$978188
DRIERS
RS1586 CONDOR GRAIN STORE EQUIPMENT To include 2x Horizontal Chain type conveyers 1verticalcup type elevator Record Fan, LaichenburyCleaner, All fittedwith3 phase electric motors,All Steel stairwayc/w side railstobesold separately Good Condition Offers %$Robin 07831$886601
RS1599 2019 OPICOMAGNA 20 Q5
Batch Drier Diesel Fired 3phase
Electric Done less than 250 Tons from NewC/W 20 TonWet Grain Bin, Auto Feed.MorePhotos on Request.Viewing Highly Recommended, LocatedNear
Aylesbury Bucks, Drier £45,000m Bin £8,000 Excellent Condition £53000 o.n.o. %$Robin$07831 886601
S10500 LAWDENIS DRIER
RS1420 2006 KUHN DRILL COMBINATION
3mtr Powerharrowc/w Drill
Combination. Dry StoredTines
80% Good Ready to go to work. MorePhotosonrequest
LocatedNrStratford on Avon
Very Good Condition £14500
%$Robin$07831 886601
RS1476 2019 KUHN HR 4004
RS1610 KR MR406
Three Point Linkagemounted 48 coulter Pneumatic Seed Drill
RS1507 PERRYANGLEVEYOR
34ftHigh X9” Belt 3phase electric,Dismantled readyfor transport, Location Nr Maidstone, PhotosNot Yetavailable Good Condition £400 o.n.o. %$Robin 07831$886601
RS1508 CARIER GRAIN
CONVEYOR 24ftlong x8”wide, Dismantled Readyfor transport, Photosnot yetavailable,Located Nr.Maidstone Good Condition £400 %$Robin 07831$886601
RS1560 RUSSEL 45 SLEW
Outdoor 12 -15TPH Drier, Vertical design appx 40ft tall, 3Phase with oilfiredburner
%$Shaun 07850$978188
S10610 TYPHOON PLYWOOD GRAIN TUNNEL
4MtPowerHarrowCombination
Drill c/w TungstenPowerharrow Tines, track Eradicators&LC402
Combi Liner Drill Only Done 600Hectaresitcomeswith Fraser 4.5 mt 8ton LowLoader
Transport trailer and Many Spare Parts, LocatedNearAtherstone Warks, Morepicturesonrequest
Excellent Condition £28000
%$Robin$07831 886601
RS1528 BET TINSON 4MTDD DRILL
6.5mt Working width Approx 13.5cm spacing,Land wheel Metering Track Eradicators, Tram line kit RekieType Following Harrow,Weather Canopy, More Photo On Request, LocatedNr Saffron Walden Good Condition £2550 o.n.o. %$Robin$07831 886601
S10444 STANHAYRALLYE 590 12 Rowhydraulic folding cell wheel precision drill fittedwith ceramic coulters. Front clod pushers, rubber presswheels front and back of coultersplus narrow rubber presswheel.Long arm hydraulic markers Good Condition £2500 %$Shaun 07850$978188
S10467 KVERNELAND ACCORD EVOTS
45ftlong 8ftby4ft In 6ft
Sections with 10 inch lateral spigotsfitted.Built in sections with topwalkway giving 2ft moreheightfitted rails. Possibly Available with 30 HP Typhoon
TC4Cyclone Fanifrequired
Very Good Condition %$Shaun 07850$978188
DRILLS
RS1386 KLEIN UNICORN
DirectDrill Fittedwith Twin Alfa Accord Seed HoppersHarrow Bar &loading table End Tow, Dry StoredLocated Nr Oakham AverageCondition £2350
%$Robin$07831 886601
RS1566 VOGLE NOOTE MASSTER A300
6M Hydraulic folding Tine drill. FittedAccess step, Hydraulic Fan, Hopper cover&Extension, 4wheel track eradicators, Long arm hydmarkers. 4x23-10.50 -1 Floatation tyres.Straight tidy drill with good points Very Good Condition %$Shaun 07850$978188
S10481 2002 RECO MASCHIO PE 300 PENTA Combination Drill mounted on 3M Maschio DM3000 Powerharrow with good QR tines, double wheel eradicator tines and largepacker roller with afew sparescrapers. Drill has Suffolk coultersin2rows, long hydraulic markers, following harrow,access stepand preemergencemakers (4 Tube shutoff valves) Very Good Condition £3500 %$Shaun 07850$978188
S10603 HESTAIR STANHAY12
ROW Rigid Precision drill set up forsugar or fodder beet
12 RowBeetDrill Chain Driven, Finger wheel Coverers,Hydraulic BoutMarkers EndTow for Transport, Very Clean, Ready to go to work, old butwell looked after,Morepictures on request
Good Condition £1550 o.n.o.
%$Robin$07831 886601
Combi PowerHarrow/Drill Power harrow ArteraGrip 300 Drill on 15cm RowSpacing Disc Coulters, Packer Roller,Finger Harrow Bar,Tramline Kit, BoutMarkers ElectroControls. Used This autumn.Located Nr.Coventry MorePhotosonRequest Transport at pricetobeagreed Very Good Condition £6500
%$Robin$07831 886601
RS1582 CARRIER 4MT £Point LinkageMounted.Grain only Drill Fittedwith Amerzone Hopper Extension, 7” rowspacing Triple Ktype coulters. Reckie Following Harrow,Pneumatic LowpressureTyres. Transport Trailer with Hydraulic Lift, Dry Stored, Morepicturesonrequest, LocatedNr. TonbridgeKent. Good Condition £2750 o.n.o. %$Robin 07831$886601
FittedEnd tow kit, soft rubber wheels, Suffolk couter, narrow presswheels and split conical rear wheels. Sound usable drill Good Condition £950 %$Shaun 07850$978188
ELEVATORS &CONVEYORS
RS1506 CARIER GRAIN
ELEVATOR 34fthigh X9”Belt 3 Phase electric, Dismantled ready to Transport, Location Maidstone, Photosnot yetavailable, transport canbearranged Very Good Condition £650 %$Robin 07831$886601
33ftLong including extension Rubber Belted Potato/Grain Elevatorwith Both Grain and PotatoHoppers, Recent Refurbished Electric motor, Dry Stored, Done little Work, Located East Sussex Good Condition £2500 %$Robin$07831 886601
S10477 MAGNA POWER MC60/3400 Cleated elevating conveyer,60cm wide with 4cm cleats. 3phase elevatesfrom 1m to 2m Very Good Condition %$Shaun 07850$978188
S10478 HAITH 80 CM Cleated elevating conveyer,60cm wide with 4cmcleats. 3phase elevates from 1m to 2m Good Condition %$Shaun 07850$978188
S10504 CARIER 40FT Belt & Bucket Grain ElevatorAppx20 TPH. Each leg 10 x7ins externally Footprint 25 x13. Built in 8ft sections. 3phase motor. Buyer removes Good Condition %$Shaun 07850$978188
S10506 CARIER 40FT Double Leg belt &BucketElevators Each with 17 ins by 8Ins legs and 17 ins by 31 ins Footprint. 3phase motor. Inside Choiceof2 Good Condition %$Shaun 07850$978188
S10507 CARIER BELTCONVEYERS 10Ins beltsappx40M Long, installed in roof to feed bins. AverageCondition %$Shaun 07850$978188
S10510 CARIER OVERHEAD Galvanised Chain &Flight Conveyersappx26m long.2of Each with 6double sided outlets fittedchain to open and change across. Very Good Condition %$Shaun 07850$978188
S10511 CARIER OVERHEAD Galvanised chain &flight Conveyer,estimated to be 40m long presently transferringcorn acrossyardsupported by sturdy support from 20m long about7m up in the air all Galvanised and accessible Very Good Condition %$Shaun 07850$978188
S10512 CARIER CHAIN &FLIGHT
8Inch Galvanised chain &Flight conveyer in 2.4m Sections total 10m installed butquite accessible.Also 2OfTop fill Galvanised 8inch chain &flight with poly tip conveyers appx25ft long Good Condition %$Shaun 07850$978188
S10514 CARIER BELTCONVEYERS
In Steeltroughs, belts290mm wide,with3 phase drives.2Appx 150 ft long AverageCondition
%$Shaun 07850$978188
S10570 SWIF TLIF TINTERSTORE SL - I115T
35ftRubber belt Elevator, with 2ftHiSpeed throwerattachment, Hydraulic up and down. Standard manual swivel wheels plus oblong hopper with castorwheels under Very Good Condition £3500
%$Shaun 07850$978188
S10571 FYSON33F TAUTO
SWINGER Rubber 20 inch belted elevator, with 9ftslewing head.. Full hydraulicsinc belt drive, up &Down. Standard swivel legs. Choiceof2 Good Condition £3000 each %$Shaun 07850$978188
S10572 FYSON34F TELEVATOR
C\wEnd chute,3 phase motor, largehopper.Basic elevator butsound with 20 inch belt and hydraulic up &down Good Condition £2000 %$Shaun 07850$978188
S10573 WYTRAC26F T Rubber 20inch belted elevatorfitted Single phasemotorand 7ft6ins extension. Fixed wheels on single axle.And castorwheels under base.Small hopper.Working order butold. AverageCondition £750
%$Shaun 07850$978188
S10628 2010 RUSMAIL QD 300/2
INCLINED FLIGHTED Conveyer 2m Long fittedcleated belt with 30mm cleatsliftsto1.5m high. Single phase seen very little use Adjustable legs. SWL75Kgs Max load 25Kgs Very Good Condition %$Shaun 07850$978188 FANS
RS1557 NECO 30 HP FAN 3Phase 50 HZ CentrifugalDryer Fan( Unused,) PhotosonRequest, Transport Available New Condition £4000 o.n.o. %$Robin 07831$886601
S10480 ELTA 11 KW Round fans forcorn aeration etc. 5 available 2withauto opening vent sections. Galvanised steel, 3phase 1m diameter0.45 deep Good Condition £300 each %$Shaun 07850$978188 FEED &FORAGE BOXES
RS1609 JF STOLL BELLAIR 2008
Self Loading StrawSpreader
BlowerBedding Machine, In Good working order,For Sale due to changeinFarming policy,MorePhotosonRequest, LocatedSaffron Walden Essex
Good Condition £2500 o.n.o.
S9479 ABBEY VF 1450 Trailed
VerticalAuger 14.5 Cubic meter mixer wagon. Single axle on twin wheels. FittedHydraulic openingrear Door,left& right 800mm front discharge. Digi StarEZ3200 on boardweighing Good Condition %$Shaun 07850$978188
FERTILISER SPREADERS
RS1236 KR M 2.5 TonHopper,= 4 x600 kg Bags,Twin Disc Spreader
Stainless Steel discs, Setto24 mtsbut will do 36 mtr.Constant weighing electronic Control Box, Fold overHopper cover, Full road Lighting,Morephotoson request,Located Nr Wisbech Very Good Condition £3500 %$Robin 07831$886601
RS1570 2000 AMERZONE N2000
Twin Disc Fertiliser Spreader 24mt Spread Hearland discs, Weather Canopy,Hydraulic On/ Off, Mud flaps, Dry Stored, not been used for3years, Photoson Request,Located Nr Wallingford Oxon Good Condition %$Robin 07831$886601
RS1611 KR MTREND SYSTEM
Twin Stainless Steel Disc up 24mt spread Hydraulic cutof, Manual Calibration Front Mud Flaps, 2 tonall Steel Hopper,Weather CanopyAnd Road lights,Photos on request,Located Nr Saffron Walden Good Condition £550 %$Robin$07831 886601
S10452 2017 SULKYDX30+
WRI GHT SB ROK ER SE
FORKLIFTS &HANDLERS
RS1587 2011 JC B541 LOADAL SUPER
Telescopic Handler,125 hp Engine 8100 Hrs, Hydraulic Lock Pins on Head Stock, Tyres50% good, Bosch Suspension Seat, PU Hitch, 3rdline Hydraulic service, Boom lights,Morephoto on request, LocatedNrGrantham Very Good Condition £28000 o.n.o. %$Robin$07831 886601
RS1590 NCENGINEERING SHEAR GRAB
S10499 MOBARK 5X10 OSCILLATING
Screen Dresserfitted 15 Kva 3phase motor. C\w various screens. Mounted on Substantial Iframe beams. Suitable formost Screening jobs. Good Condition %$Shaun 07850$978188
S10598 SINAR GRAIN SPEAR 6300 Moisture analysing spear, will assess temperatureand moisture content of grain. Very Good Condition %$Shaun 07850$978188
RS1622 2004 JOHN DEER 1145 OUT FRONT MOWER
%$Robin$07831 886601
Twin discmounted fertiliser spreader with TribordWPB on boardweighing system
ISOBUS ECUFitted, 2hopper extensions, folding hopper cover and road lights.Very Clean Excellent Condition %$Shaun 07850$978188
S10496 2006 AMAZON ZAM1200 Twin discspreaderc\w 2 hoppersextensions, cover&grids. 18 -24m discs, twin hydraulic shutoffs one shuttingoff headland kit via tap. Holds appx 3x12cwt bags Good Condition £1600 %$Shaun 07850$978188
S10538 VICON 802 Mounted Varispreader c\w hydraulicshut off, Ihopper extension. Stored inside Good Condition £175 %$Shaun 07850$978188
S10566 1998 KUHN MDS1141 Mounted Twin Spinning disc spreader.FittedB910 &B610 hopper extensions to carry 4 half tonbags. Plus Headland kit, Hopper grids and cover. Tidy for age, 24M discs Good Condition £600 %$Shaun 07850$978188
5ft6” (or 1.70mt) width c/w JCB
Brackets, Complete KVTines, located Nr Grantham, more photosonrequest Good Condition £1250 o.n.o. %$Robin$07831 886601
S10528 BV WESTERGARD PALLET
TRUCK Hand operated suitable formoving pallets up to2500 kgs, Well made tool in good order Good Condition %$Shaun 07850$978188
S10578 2022 JCB 542 /70AGRI EXTRA
Hi Spec telehandler with Torquelock transmission, Air conditioned cab, Pick up hitch, trailer brakes, Spool connections front &back. Quick fit hydraulic locking carriageand 360 degree LED lighting.3400 hours. 500/70 R24 Industrial pattern tyres. Very Good Condition £77500 %$Shaun
07850$978188
GRAIN EQUIPMENT
RS1530 COLLINSON 12 TON
Grain/ Feed Hopper Side Discharge, Purchaser to Dismantle,Fork lift available to help loading,MorePhotoson Request,Located Nr Nuneaton
AverageCondition £750
%$Robin$07831 886601
RS1567 GRAIN PUSHER Locally Made Fittedwith Matbro Back Plate, Photosonrequest Good Condition £450 %$Robin 07831$886601
S10626 CONCRETE WALLING
SECTIONS LShaped one meter wide Heavyconcrete walling 2.5m tall with 0.7m feet. 7pieces plus onecorner section. Also 17 Concrete“Lego“Blocks1.6m long by 0.8m by 0.8m plus 2of 0.8m square. (NearGrantham) Good Condition %$Shaun 07850$978188
GRASSLAND EQUIPMENT
RS1367 2018 MA JOR MJ30 350 Cyclone Finishing Mower TractorMounted PTOdriven, Hydraulic Folding Large DiameterRoller,Mutirotary disc cutters, Galvanised Hood Full Road Lighting,Hardly used as New. More photosonrequest, Transport canbearranged Excellent Condition £6250 o.n.o. %$Robin$07831 886601
RS1398 GEOBROWNS 2.3 FLAIL MOWER
C/W Hydraulic Side shiftMulti Point CAT2Linkage. Whale Tail CastSteel Flails, HDRearRoller, Opening Rear Access Door,More photosonRequest,OverRun Gearbox Excellent Condition £4850 o.n.o. %$Robin$07831 886601
RS1621 CLASS JAGUAR 680
Self Propelled Forage Harvester,Fully Floating 2.5mt Pick Up reel Header,25m Precision Chop Cutting Drum 180Hp V6MercedesDiesel engine, NewClutchLastyear, various Newbelts in 2023, Readytogo to work Good Condition£7750 o.n.o %$Robin$07831 886601
Rotary Deck 5ft cut, well maintained in good working order,Startsonthe button Only 1500hrsNew Gear Boxoncutting deck, recent service, located nr WinslowBucks,Morephotoson request Very Good Condition £6500 o.n.o. %$Robin$07831 886601
S10424 RITCHIE 6M Mountedset of Hydraulic folding Grassland harrows. FittedReversible Cast harrow mat. Tidy condition. Good Condition £2000 %$Shaun 07850$978188
S10437 RECO FERRI 5ftLeftHand Offset-able Side Flail mowerwill go outoruptocut verges and low hedges Good Condition £1750 %$Shaun 07850$978188
S10451 2019 KVERNELAND 8555 5.5 M4 Rotor7tine mounted Hydraulic folding tedder with 4 wide tyres. Seen little work and storedinside Excellent Condition £4950 %$Shaun 07850$978188
S10464 2000 RECO MENGELE SH 40N Trailed Full chop forage harvesterfitted PU 1800 Pitch up header 1.8m wide.Fitted in cabhydraulic spoutswivel and electric chute elevation. Electric blade sharpener &Pick up hitch. Good 11/5 -15.3 tyres. Good Condition £5000 %$Shaun 07850$978188
S10594 2004 MUTHING MOL /S200 Mountedhydraulically offset-able 2m wide flail mower with heavydutyflails and roller Good Rams, long PTOshaft. Useful and generalpurpose verge mower Good Condition %$Shaun 07850$978188
HEDGECUTTERS
S10537 POWERUP A80COMBI RH 3Point LinkageMounted Fully IndependentPTO driven hedger 2.7M Reach with 800mm YFlail Head inc roller.Comeswith 1.3m Knifesection cutter baraswell (Unused). Has 4leverincab controls. As newhardly used & Storedinside Excellent Condition £3500 %$Shaun07850$978188
IRRIGATION EQUIPMENT
RS1585 FORD WRIGHT RAIN
WRI GHT SB RO KE RS ER VI CE
S10431 BAUER 5INCH
Irrigation pipesappx6mLong, Appx50available Very Good Condition £80 each %$Shaun
07850$978188
LIVESTOCK EQUIPMENT
RS1626 CALF VERANDER !5ft
X15ftAll steel Galvanised Frame Transport Wheels Coated, Weather ProofRoofing with 4ft over hang,Located Nr Leicester, More Picturesonrequest Very Good Condition £2000 o.n.o.
%$Robin 07831$886601
S10408 GALVANISED FEED
BARRIERS 2ofFreeStanding in boxsection with timber lower panel. 139 cm high, 452 cm long with 50cm feet Very Good Condition £300 each %$Shaun
07850$978188
S10436 PORTEQUIP CALF
CREEP Feeders, 2Ofpainted redintidyorder,littleused Very Good Condition %$Shaun
07850$978188
S10517 2013 FULLWOOD MERLIN
Milking Robot, Single Phase plus compressed Air.Fully Stainless steel unit milksone at atime automatically buthas an alarm to ring youinthe event of an issue. Also IncludesPlateCooler,Remote switch, Single phase Vacuum pump to milk and HPC Kaeser
Sx3Sigma Air centre combines Compressor and Air drier, also single phase butneeding attention. Good Condition £17500
%$Shaun 07850$978188
S10542 DOUBLE HORSESHOE
PONY TRAP Unused Steel trap suitable forshetland pony finished in redwith black leatherette double seat. Fittedfootbrakes and shafts. NewCondition £525 %$Shaun 07850$978188
S10618 TUBAR CATTLE CRUSH Free standing standardpainted crush with timber floor,straight and sound with 3point linkage attachment pointstotransport. Good Condition £425 %$Shaun 07850$978188
LOADERS AGRIC/ INDUSTRIAL
RS1615 FARMHAND F9H
S10489 TOETIP BUCKET 1.8M
Wide by 1.35m deep C\w loader bracketsonback believedto be Cameron Gardner Average Condition £500 %$Shaun 07850$978188
S10615 MATBROTELERAM
TURBO Articulated Telehandler c\w Solo Joystickcontrols, Clarke speed transmission. hydraulic locking Pin &Cone attachment system. 50 %15.5 -80-24 tyres. Soundmachine,but has alittle rustaround the edges
Good Condition £7500 %$Shaun 07850$978188
MISCELLANEOUS
RS1368 CHARTERHOUSE VERTI TOP
S10586 HEAVY DUTY HORIZONTAL LOGSPLIT TER
Free standing built on Substantial spline frame with side catchers to prevent roll off. Hydraulically driven. Will take Logs up to 3m long.Plus Rocking deck to assist feeding machine Good Condition £3000 %$Shaun 07850$978188
RS1576 BUNNING HIGHLANDER 12TON
24 ft Spread 4Spreading Discs (New), 2Horizontal Beeters Varial speed Conveyor,New Bearing This Year,Road Lights,Hydraulic Brakes, Well Maintained, ready to go to work, MorePictureson Request,Located Near Wisbech Very Good Condition £7500o.n.o %$Robin$07831 886601
Artificial Surface SportsGround Cleaner,Tractor Mounted PTO driven Sand Vacuum Filter 5ft working width, good working order,MorePicturesonRequest, Location Buckinghamshire Very Good Condition £2500
%$Robin$07831 886601
RS1569 AIR COMPRESSOR
Current test cert Airline air tank Approx 20” =5CM diameter53” =135 Length, Good Working Order,Photo on Request Good Condition %$Robin 07831$886601
RS1618 POST HOLEDIGGER
12 INCH AUGER PT ODrive,
Done Little Work, Dry Stored, Ready to go to work, Photoson request,Located Nr Stowmarket Good Condition £250 %$Robin 07831$886601
RS1625 AG 175 DISPENSER
S10588 RYTEC 3 PHASE PTO Free standing PTODrivepoweredby3 phase motor. Designed to replace atractor on stationary PTOdriven machine c\w cable.Appx4years old Very Good Condition £4000 %$Shaun 07850$978188
S10589 ECC 52.5 KVA 3phase 40KwGenerator skid mounted, poweredbyVolvoPentadiesel engine c\w fuel tank radiator etc. Plus control box. Startsand runs well Good Condition£2000 %$Shaun 07850$978188
S10617 20 KVA Trailed Generator poweredby4 Cylinder BMC diesel engine.OnSingle axle chassis with 10/75 -15.3 Tyres, Under engine fuel tank, Rain cover, 240v 13 amp and 440V 16 amp socket Good Condition %$Shaun 07850$978188
S10624 RAILWAYSLEEPERS
2.5m (8ft 5ins) Long 8inch by 5” creosotedextrack reclaimed sleepersinmixed condition Good Condition £20 each %$Shaun 07850$978188
RS1608 CASE MUCK FORK
1.75 mt wide 8tinesindustrial HD type fork with Weld on Font loader brackets Good Condition £500 %$Robin$07831 886601
S10469 SEPCOM BIO
SEPARATORS Choiceof2c\w 2.2 Kw 3phase motors on galvanised steel stands. Appx 6” centre augers with 0.75 Stainless steel screens. Very Good Condition £5500 each %$Shaun 07850$978188
S10470 2011 DI VERRAALDIVIO 400 Slurry separator., Free standing boxtype unit with 6.5 inch feed. Good Condition£2000 %$Shaun 07850$978188
S10564 2010 CLA AS ZERION 3800 SADDLETRAC
Side delivery Sand or Feed Dispenser,for CubiclesHydraulic DriveJCB Quick attach Brackets, LocatedNrLeicester, Morephotos on request Good Condition £1250
o.n.o %$Robin$07831 886601
S10472 CHASE TITAN 7LOADING
S10627 BIG BRUTE INDUSTRIAL Vacuum Cleaner suitable for Grain storesetc.Fitted3 Motors all single phase.Mounted on Galvanised palletised trolleywith wheels and handlessocan be wheeled or movedwith forklift. Quantity of 3Inch suction hose Very Good Condition %$Shaun 07850$978188
MUCK &SLURRY EQUIPMENT
RS1542 2004 BUNNING HIGHLANDER 20TON
DriveinPowerloader to fit Ford 5000 &Ford66rangeC/W
Hydraulic Spool valves,Nearly NewMuck Fork,, big bale Spike (Plus 6ftGrain Bucket is available as well), LocatedNrStowmarket More Photosonrequest
Good Condition £1250 o.n.o.
%$Robin$07831 886601
RAMP Appx10M long and 2.2m wide.Rated at 7Ton. Ideal for loading Flat trailers. Getting rare Good Condition %$Shaun 07850$978188
S10583 WIDE PAILING FENCE
ForwardControl Self propelled fittedwith SGT Slurry kit with tank andfront mounted Vogelslang pump and snorkel kit. Joystick operated canfill in 6minutes. Cat 4rearlinkagefor injectortoolbar etc.800/900 /65 R38Flotation tyres. 2Speed Hydrostatic transmission and Climatecontrolled cab. Good Condition £87500 %$Shaun 07850$978188
PLOUGHS
RS1434 1999 DOWDESWELL DP120S
In 30ftRolls on Pallets6Rolls per pallet. 3ft6ins high 3.5 ins spacing @30per roll. 50 rolls of Oakand 80 of dipped( decking oil) pine (£10 per roll less New Condition £85 each %$Shaun 07850$978188
Trailed Spreader,Air brakes, Sprung Draw Bar,Spinning Disc & Horizontal Beater,Variable Speed Floor,WeightCells,, Rear Tow Bar.Inworking order readytogo to work (2 Machines available PriceisPer Machine), Located Nr.Ashford Kent Good Condition £9000 o.n.o. %$Robin$07831 886601
9Furrow ReversibleOnLand Plough Fitted with DD Bodies Skims, Depth Wheels. Plough Metalall good No breaksor welds, Cat 3Linkage, Many more picturesonrequest, Transport can be arranged at cost to be agreed Very Good Condition £5750o.n.o %$Robin$07831 886601
RS1454 RABE 4FURROW SLATTED 14inch 3+ 1AutoResetC/W ManureSkims And depth Wheel, Plough metalall good, Location Bury St Edmunds, More photoson request Good Condition £3250 o.n.o. %$Robin$07831 886601
RS1456 DOWDESWELL DELTA 100 S 4furrow14” reversible on SlattedBoards Hydraulic Vari Width Manureskims &depth Wheel, Sorry No Photos, Located nr Bury St Edmunds Very Good Condition £2750 o.n.o. %$Robin 07831$886601
RS1457 KV FURROW PRESS 4 FURROW
In Good working order in use this AutumnRings all sound, More Picturesonrequest,LocationBury St Edmunds Good Condition £550 o.n.o %$Robin$07831 886601
RS1501 2013 DOWDESWELL 105MA
5furrowreversible (4+1) on Slated Boards, Manual Variable width, Little ware of the Fen, LargeClearance, Manure Skims &Rear Discs, Depth Wheel, More Photosonrequest, LocatedNr. Spading Very Good Condition £5800 o.n.o. %$Robin$07831 886601
RS1565 2005 RABE 4+! FURROW
5Furrow Plough on 14” Slatted Boards Variable width by Bolt 12 14” 16” Depth Wheel, Manure Skims Plough MetalGood +New Sparewearing Parts,MorePhotos on request,Can be delivered at pricetobeagreed Good Condition £4250 %$Robin$07831 886601
RS1592 KVERNLAND LM85
5Furrow ReversiblePloughfitted with No.8Bodies. 300 ml under beam clearanceDepth Wheel& manureSkims.Plough Metal75% good. In use this autumn. Located Nr.Grantham. More. Photos on request Good Condition £2250 %$Robin$07831 886601
S10402 LEMKIN 110 VARIOPACK
28 Ring Furrow pressc\w 30Degree rings appx9ft wide
Recently refurbished pressc\w transport headstock suit 5x20 inch furrows. Good Condition %$Shaun 07850$978188
S10415 RANSOMES OVERRUN 4
F Reversible plough, 36 inch point to point ad 29 under beam. Good Metal, Rear discand steel depth wheel Good Condition %$Shaun 07850$978188
S10482 DOWDESWELL DP 2 6
Furrow Double Offsetreversible upgraded to use with articulated tractors on Duals. This includes link arm extensions anddepth wheels on headstock. SCN bodies, Manureskims and scalloped rear discs. 3extrafurrowsavailable, one less some parts.Good 15/55 -17Depth tyre. Good Condition £2000 %$Shaun 07850$978188
S10515 RANSOMES TSR300 HD
6Furrow Reversible plough, (3 +1 +1+1 )14 ins UCN bodies, 34ins point to point, 27 inch under beam with trashboards. HD model with Rack &pinionturnover. Bracketsfor Discs butonly fitted to the rear Furrow.Sound plough Good Condition £700 o.n.o.
%$Shaun 07850$978188
S10549 RANSOMES TSR110 4
Furrow reversible plough with greased UCN bodies, Sword Landslides, ManureSkims & Depth wheel. Good Frogs.Plus Double coil Flexicoil Furrow pressc\w manual pressarm fitted. Good Condition %$Shaun 07850$978188
S10596 LEMKIN VARIOPACK 110 Double ring presswith8 of 30 degree rings plus 2spares ( 68 inch appx).FittedTransport headstock and rubber cleaning straps Good Condition %$Shaun 07850$978188
S10606 VOGEL AND NOOT6 FURROW Hydraulic variwidth plough with slattedbodies. Was OK butBeamisbrokenafter 2nd furrow.Repairs or spares
AverageCondition Offers
%$Shaun 07850$978188
S10625 RANSOMES TSR300S 2 Furrow hydraulically reversible plough fittedUCN bodies ( some Ransomes), manure skims and sprung bar points.
AverageCondition %$Shaun 07850$978188
POTATO HARVESTERS & PLANTERS
RS1141 RUMPTSTAD ROTARY RIDGER
RS1436 GRIMME 2ROW
Potato HarvesterFully Reconditioned/w 50mm Webs but35mm and 60 mm also part of the deal Hydraulic Power steering Lowleveldischarge elevator, alovely clean machine, ready to go to work, Reason for sale changeoffarming Policy, MorePicturesonrequest,Located Nr Bromsgrove Staffs Very Good Condition £5600 o.n.o.
%$Robin$07831 886601
RS1481 2015 STANDEN STARLET FM2
TwoRow PotatoHulme pulveriser with Side Delivery Dischargein good working order,Located near Kings Lynn Very Good Condition £2780 o.n.o. %$Robin$07831 886601
RS1517 STANDEN PEARSON 4X 36 POTATO PLANTER
WRI GHT SB ROK ER SE
S10565 2005 GRIMME GL32T
Trailed tworow potato planter c\w hydraulic tipping hopper and stainlesssteel fertiliser hopper.Covererdiscs and hood. ComesGreen beltsfor normal seed and Blue beltssuitable forseed up to 63mm. Steering axleswith 12.5/80 -18 track grip tyres Good Condition %$Shaun 07850$978188
POTATO /BULB GRADERS &EQUIPMENT
RS1387 RANSOM FAUN 2X 30 “ROWS C/W excellent Ridger BodiesNearly, NewTyres, Beautiful Little Planter.Ready to go to work Very Good Condition £650 %$Robin 07831$886601
RS1437 SQUIRE 120 TWIN GRADER
Potato grader Will Split Grade Bulk up to 20tons PerHr3 Phase electric Many Sparewebs Various Sizes,Sale due to Change of Farming Policy,Located Near Bromsgrove,Dry stored Good Condition £4600 %$Robin$07831 886601
S10432 1994 TONG 4F TCOIL
POWER HARROWS
RS1359 LELYPOWER HARROW 3MTR COMBINATION DRILL Combination C/W rear PiggyBack linkage&RECOSulky Suffolk Coulter Seed Drill. With Rekie Following Harrow,Veryclean Machine Directfromfarm, ready to go to work, Can Be delivered at cost to be agreed. MorePhotos on request Very Good Condition £2750 o.n.o. %$Robin$07831 886601
RS1580 2003 MASCHIO 3MTR
S10509 CRIT TALNESTOF28 3m panelled Squarebins. Joined in 2 paired runs off7aside.Total28 bins. 6Panels each 1m high per bin. One panel per bin has 20 by 22 ins access panel and 6ins hole foraeration tube (One per bin included )AFew Single phase 550 Wfans Good Condition %$Shaun 07850$978188
PowerHarrowc/w Packer Roller, in good working order,Tines 75% good, Dry Stored, Located Nr.TonbridgeKent, Morephotos on request. Transport canbe arranged Good Condition £4500 o.n.o %$Robin$07831 886601
S10420 KVERNELAND 3M Power harrow,FittedHeavyduty1000 Rpm Gearboxwith 540 shaft. Good tines, fewleaksand no packer or Crumbler.Spares or repairs Poor Condition £450 %$Shaun 07850$978188
S10559 SHIPPING 40FT SteelHi Cube Containers, painted dark green, delivery by arrangement locally in Lincs Good Condition £2750 %$Shaun 07850$978188 SPRAYERS
RS1472 2020 AMERZONE UF 1501
Tractorthree Point Mounted Sprayer C?W20Ftbooms Mixing tank &Handwash, Ambset controls, Current12months Cert. Reason forsale going Organic, Notused lastyear. More pictures on request Excellent Condition £17500 %$Robin$07831 886601
Ridger Hood. Twin Planter Belts Stainless SteelOpenersTrack EradicatorsWideAluminium Loading Walk way, Chemical Applicator PerRow,Very clean, Ready to go to Work, Many more picture on request,Delivery canbearranged, LocatedNr Newmarket Very Good Condition £4250 o.n.o. %$Robin$07831 886601
RS1559 STANDEN TWINROW
Grading Module with Falt belt Feed conveyer. Mounted on Adjustable legs C\w 3 phase motor&cable Very Good Condition %$Shaun 07850$978188
S10476 HAITH BOXTIPPLER Free standing model, on legs appx 1m up in the air.Hydraulically operated will requirepower pack or tractortowork. Fitted side safetycages,suitable for standardton box1.2m by 0.9m. Good Condition £1700 %$Shaun 07850$978188
S10421 RECO MASCHIO DM4000 4m Harrow C\w good bolt on tines, packer with hydraulic adjustment. 1000 Rpm through shaftgearbox.Faded paint AverageCondition £850 %$Shaun 07850$978188
S10486 LELYEND TOW KIT Suit 4M Lely Roterra. C\w drawbar,2 Goodyear 10/80 -12tyres and brackets Good Condition Offers %$Shaun 07850$978188
S10581 KUHN 3M PACKER Roller,Standardtype c\w fittings including scraper bar etc to go on powerharrow. Seen little use Very Good Condition £700 %$Shaun 07850$978188
SILOS &STORAGE
S10474 CENTRE DISCHARGE
Potato HarvesterAll Hydraulic driven, LowPressureBalloon
TyresRollersTwo stagelifting
S10555 FARM ELECTRONICS DX / 4354 Ambient temperatureStore Chiller unit.. All In one topoutlet Easily installed presently in 75ft by 30ft store.Requires outside air access through 54 inch square vent. Unit Base bloweris8ft by 55 Inches7ft tall. C\w Controls all 3phase Good Condition %$Shaun 07850$978188
S10600 1997 TONG 1TON BAGGER Fittedone 15 inch and one 4inch belt. Compressed air bag grips, 3phase electrics. Gold livery Good Condition %$Shaun 07850$978188
Free standing open tophopper on legs appx2my1.5m. Fitted powereddischargeslide appx1m high and extension on top. Very Good Condition £5500 %$Shaun 07850$978188
S10475 CENTRE DISCHARGE
Open topped free standing hopper fittedpowered8 inch auger dischargeout of side Mounted on legs. Good Condition %$Shaun 07850$978188
2, 3speed gear boxrows30 hook tined interow Cultivator c/w Ridging Hood, Depth Wheels, 3 Speed Gearbox, Ready to go to work, Morepictures on request
Very Good Condition £1250 o.n.o.
%$Robin$07831 886601
WebbsRear Sorting Table with with Weather Canopy and side curtains &Side delivery Discharge ElevatorHydraulic Driven Wheels and Steering Remote Camera and electronic controls for the Driver,Located Nr Walsall
Excellent Condition £19000 o.n.o.
%$Robin$07831 886601
S10562 KEYAG GRUSE 2Row cup planter c\w hydraulic tipfilling hopper and ridging bodies. Kept inside,good working order for itsage Good Condition £750
%$Shaun 07850$978188
S10602 TONG BAGCONVEYER 8ftby12Ins wide with 12 Ins plywood sidesSuitable formoving bags or stitching Also 4FTby12ins wide roller conveyer formoving bags or boxes. Good Condition %$Shaun 07850$978188
S10622 NEWLONG NP 7 Hand held bag sewing machine,single phase (13amp) c\w string and tool kit. Shop soiled unused machine Excellent Condition £550 %$Shaun 07850$978188
S10479 FREE STANDING Centre dischargehoppersonlegs, galvanised steel one round, one corrugated. Appx5ton each. Kept inside Very Good Condition %$Shaun07850$978188
S10485 DMC 120 TON Drying Silo appx 18ft Diameter&20 ft to eaves.Includesautomated transfers systemand Bental fan with LPG heater included.Fully reinforcedwith good galvanised panels. Good Condition %$Shaun 07850$978188
RS1529 CHAVTRACK 24MT SPRAYBOOMS Self Propelled Sprayer,Perkins Engine,4Wheel Drive, 4Wheel Steer Running Gear is JCBLoadall, Flotation &Row Crop Wheels 2000lt Tank Full Road lighting,Wash tank, Chemical induction unit Variable ratcontrol, No CurrentCertificate, LocatedNear Oakham Rutland Good Condition £8500 o.n.o. %$Robin$07831 886601
RS1563 1993 FRASER AGRI BUGGY56
tank &Handwash, Control, RDS,Rowe wheels,
24 mBooms, 5section Control, RDS,Rowe Crop wheels, ready to go to work, LocatedNrMelton Mowbray Very Good Condition £9250 o.n.o. %$Robin$07831 886601
RS1584 1996 GEM DIAMOND 1000LTRCTT Sprayer c/w 20 mt Booms Mixer tank, wash tank, Variable LevelBooms & BoutMarkers,LastCert2022 Good Condition £1500 %$Robin 07831$886601
S10619 HARDI LY 1000
Mounted 1000 litresprayer with hydraulic folding &lifting 12m booms fittedwith triplexnozzle holderswith good selection of nozzles. Plus induction bowl, washouttank and self cleaning filter.Handy sound sprayer Good Condition %$Shaun 07850$978188
WRI GHT SB RO KE RS ER VI CE
SUBSOILERS
RS1453 TWB 7LEG
Cat2&3 ILinkage AllGood MetalPressureroller BrakeBack Legs,Location Newmarket,More picturesonrequest, transport canbearranged Good Condition £3750 %$Robin$07831 886601 RS1475 MASTEMBROKE
Single Legtrailed Mole Drain Hydraulic LiftWheels And SSLeg, In good working Order,Location Atherstone Warks, morephotos on request Good Condition £1750
%$Robin$07831 886601
RS1556 FALMAC 5LEG 3.5MT HeavyDutySub Soiler C/W Heavy duty Packer Roller,Ready to go to Work, LocatedNrCrowland Peterborough. Transport canbe arranged at cost to be agreed+ Good Condition £4000 o.n.o.
%$Robin 07831$886601
RS1588 2014 CHALLENGER PHOENIX 3.00MT
5staggered Sub Soiler Legs Onerow of Angling Discs followedBySteel.Road lights side RailsPressureRoller,More photosonRequest,Located Nr Grantham Good Condition£7000 %$Robin$07831 886601
S10544 MOLE PLOUGH Beam type 3point linkagemounted to plough up to 1m deep C\w mole &expander on 16 inch by 1inch leg.Includessecondary skids for shallowerwork Good Condition £900 %$Shaun 07850$978188
TANKS
S10498 TITAN FUEL SAFE 2500 litrebunded plastic fuel station, fitted240 vpump with hose,fuel meterand Watchman indicator. Green Good Condition £700
%$Shaun 07850$978188
S10608 10,000 LITRES
StainlessSteel ex Milk tanker bowser,fitted Drawbar,Engine driven pump etctouse as spray bowser.Sound order as kept under cover when notinuse Good Condition £5750 %$Shaun 07850$978188
TRACTORS &EQUIPMENT
S10428 1991 RENAULT103 - 54 TRACTOR
4wdTractor,c\w 4spools, QA arms, trailer brakes, 14.9 R28 fronts60% 16.9 R38 rears. 7415 hours. Tidy tractor Good Condition £12750 %$Shaun 07850$978188
S10429 LEYLAND 384 75 HP 2wdtractor in largely original condition except fornew radiator, Seat, brakes &steering.Runs well V5 available Good Condition £2800 %$Shaun 07850$978188
S10445 2015 JOHN DEERE LIF TRAMS 80mm Ex John Deere6120, supplied as high capacity butupgraded. Little used Excellent Condition %$Shaun 07850$978188
S10463 2013 WATKINS900 KGS Steel 3point linkageweight block forTractor front linkage mounting Very Good Condition £1500 %$Shaun07850$978188
S10488 INTERNATIONAL WEIGHTS Setofrear wheel weightsfor IH or Ford tractor, roundtype Good Condition %$Shaun 07850$978188
S10524 ALLIS CHALMERS ROCROP Tractor, 2wdon80% 9 -24 Rearsand 4-15fronts. 3 Speed gearbox, PTO&Drawbar Good Bench seat. Designed with long bell housing for centrally mounted implements Good Condition %$Shaun 07850$978188
S10525 JOHN DEERE MODEL A 3Wheel Rocrop tractorFitted Electric start petrol engine.C\w with Drawbar,PTO and Stubs forlinkage.Long axleswith 11 -42rearsand 7-50-16 fronts Good Condition %$Shaun 07850$978188
S10532 1985 FORD 6610 4WD
Tractorfitted AP cab, PASand Quicke3360 Powerloader.70% 13.6 -38 Rearsand matching fronts, spools and pick up hitch. Showing 3282 hours Very Good Condition £11950 %$Shaun 07850$978188
S10556 JOHN DEERE 900 KGS Cast Iron Weight block to go on front linkage. Painted Black. Good Condition %$Shaun 07850$978188
S10593 1996 MASSEY FERGUSON 6150
4WdTractor,One owner from newonly 2800 hours. D1 Spec. Goodyear 600/65 R38 rears 60&and Matching Front 480/65 R28s. 100 HP Little used I recent years, Spotless in and out Very Good Condition %$Shaun 07850$978188
S10629 2000 JOHN DEERE 6210 4wdTractor FittedJohn Deere 640A DriveinPowerloader with Joystick control. Powerquad gearboxwith Left hand reverser Recent Topend overhaul. 320/85 R28 Frontsand 14.9 R38 Rears 60%. Tidy useful Tractor Good Condition £17500 %$Shaun 07850$978188
TRAILERS
RS1478 BALE TRAILER MULTI FLAT8
S10462 HI LIF T 4Ton Trailer with double timber sidesappx 4ft.Single axle on 12.5/8015.3 tyres.Sound tidy trailer Good Condition £1400 %$Shaun 07850$978188
S10465 WEST10TON Front loading Silagetrailers, Choiceof2 straight, readytogowith full sets of extensions, Auto rear doors with mesh panel etc.Walking beam axleswith 12.5/80 -15.3 tyres.Brakes& LEDlights Good Condition £4500 each %$Shaun 07850$978188
S10547 DOLLY ForMoving Artic trailersc\w 5th wheel coupling 9-/20 tyres on 8studbraked axle.Good Drawbar,suit yard work AverageCondition £450 h %$Shaun 07850$978188
S10574 TYE 4TON HI TIP Trailer, Single axle axle trailer with good 12.5/80 -15.3 Tyres on 6stud axle. Steel Floor and 4ftPlywood sides. Repaintedawhile back but still tidy Good Condition £1200 %$Shaun 07850$978188
VEHICLES/4x4
RS1524 DISCOVERYTYRES 25555 R20
4ofRoad Tyres50% Good, LocatedNrWinslowBucks£7500 Each ONO Good Condition £75 each %$Robin$07831 886601
RS1598 2012 DAFLF45.160 EVVEURO5
Artic type Bale Trailer with stepped frame and Dolly on Super single Wheels, Located near Newmarket,Morephotos on request Very Good Condition £2750 %$Robin$07831 886601
RS1540 WARWICK 10 TON Grain Trailer Drop Detachable Sides Manual rear door,Grain chute Road Lights &Brakes, Good all round General Ag Trailer Good Condition £4500 o.n.o. %$Robin 07831$886601
RS1553 MERRICK 16TON
Converted Grain trailer Twin Wheeled,Tandem axle Good TyresAluminium Body,Manual Rear Door,Grain chute,Road Lights Hydraulic Brakes,Fold overTarp.Dry Stored. Good Condition £5750 o.n.o. %$Robin 07831$886601
RS1554 GRAIN TRAILER 14TONS Lorry converted Grain Trailer Tandem Axle,Aluminium body, Drop ownsides, Manual Rear Door,grain Shute Road lights, Fold overTarp,Hydraulic Brakes, DryStored, located Nr Crowland Good Condition £4500 %$Robin 07831$886601
RS1620 LOWLOADER PLANT TRAILER
S10592 SINGLE AXLE General purpose lorry conversion trailer 15ftlong steelbody with 3ft sides. 18 -19.5 Tyres. Average Condition £1250 %$Shaun 07850$978188
S10613 2014 BAILEY 18 TON Monocoque Triaxle trailer with steering second axle,hydraulic back door and Easy sheet. Plus Silagesidesifrequired Good Condition %$Shaun 07850$978188
S10614 2003 RICHARD WESTERN 12 TONROOT Tandem Axle trailer on Super singlesfitted Sprung drawbar,hydraulic brakes and back door with grain chute Front ladder Easy sheetand rack Good Condition £7000 %$Shaun 07850$978188
S10616 TEAMPORTTRIAXLE
Commercial 41 FT Flat trailer c\w hydraulic brakes on steel springs with 385/65 R22.5 Tyres. Timber floors, Side bars& Rubber mudguards Good Unbraked dolly if required. Choiceof2 AverageCondition %$Shaun 07850$978188
S10620 IFOR WILLIAMS 12 BY 6
Superb Coach Build 7.5 Tons Horse BoxMOT Aug24257000 miles2-3 Stalls, Professionally Maintained by Daf Mechanics, Manual gearbox, Electric Ramps, Full Air suspension, Exhaust Braking,Adblue Fuel system, Mains Hook up /Gas, Horse Shower, Privacy glassand SS wheel Trims, Saddle Storage, Rug Rack, Anti Slip Floor Matting Full Living accommodation. Remote cameras, Full Spec sheetand Photos on request, Location Shepshed Leics Excellent Condition £25500 o.n.o. %$Robin$07831 886601
RS1612 2016 CITROEN RELAY 3.5 TON
TwoHorse Box2.1Ltr Diesel converted by AscotHorseboxes in 2017, Dry Stored, only 3000 milesfromnew,Full service history,12months MOT. Sat Nav,Internal camera, Gas ring, Mini Fridge, Sink, Wardrobe, Single bunk over cabin. Twin tack Lockers+, Gas &water Locker,Morephotosonrequest. LocatedNearBostonLincs Excellent Condition £29000 %$Robin$07831 886601
S10494 2002 ISUZU TROOPER CITATION SWBAutomatic 3.0 D Engine.Green Livery with grey velour heated front seatsCurrent MOT. FittedSteel wheels with 245/70 R16tyres 70%. AndTow bar AverageCondition %$Shaun 07850$978188
Artic Type NO BOGIE 26ft X8ftAll Steel Deck Beaver Tail, Wooden Deck on 8ft X8ft Swan Neck Hydraulic Rear Rampswith fold outSkids, Full Road Lighting and amber warning lights,Hydraulic Brakes, Twin Axle &Twin Wheels on 10 stud 8.2 XR16 Wheels Viewing,Recommended, More Photosonrequest,Located Near Wisbech Good Condition £3250 o.n.o %$Robin$07831 886601
Flat tandem axle 3500 KGstrailer with Galvanised chassis, Good Floor tidy order Good Condition £1750 %$Shaun 07850$978188
S10623 1988 BAILEY 11 TON Monocoque trailer on walking beam axlesfitted with 385/65 R22.5 Tyreson8studhubs. Swinging back door with grain chute,Front ladder and small window. AverageCondition %$Shaun 07850$978188
S10520 MITSUBISHI HARDTOP CANOPY To suit 2006 -2014 L200 Animal pick up body
All Glassincluding rear lifting windowand sliding side & front window. Painted Black AverageCondition £250 %$Shaun 07850$978188
S10527 LANDROVER SWB Petrol Series2with Hard& Canvas tops Towbar and new7.50 -16 Tyres. Good all round condition. Very Good Condition £17000 %$Shaun 07850$978188
S10611 HONDATRX 300 QUAD BIKE 4wdwith Electric start. Lightuse by current owner Good Condition %$Shaun 07850$978188
• Meet new customers and showcase new products and services
• Manufacturers and the region’s top dealers attending
• Network with potential new clients and suppliers
• Support and promote farming in the South of England to a wider audience
Farm Machinery Buyer is the new website for Farm Machinery and Agricultural Trader where you can buy and sell agricultural machinery online.
Here’s what you will see:
• Find machinery for sale. You can search by category, keyword and location. Plus you can select your price range.
• Sell your farm machinery. Please note: if you have already registered your details with Farm Machinery, you will need to reset your password. Find our handy How To guide on the website.
• Find our list of the best agricultural dealers with our Company Directory.
• Read the latest from the agricultural industry with our news section
• Want a detailed guide on what to look for when buying second-hand machinery? Read our expert Buying Guides Get results with Farm Machinery Buyer.
YOUR ACCOUNT TRANSFERRED
Please note if you already have an account with Farm Machinery it will have been transferred over to the new website but any existing listings will not have been included
RESET YOUR PASSWORD
Please note if you already have an account with Farm Machinery, YOU WILL NEED TO RESET YOUR PASSWORD at www.farmmachinerybuyer.com/profile/reset-password/
RESET YOUR PASSWORD OR CREATE A NEW ACCOUNT
Once you have reset your password or created a new account you can manage your profile page, account details and your listings.
MY LISTINGS
From within your dashboard you see all your listings with the status of each item.
Pending: Awaiting processing by Farm Machinery admin
Scheduled: Your listing has been processed and is set to go live once the magazine has been published
Live: Your listing is on the website
You can edit your listing and resubmit at any time after it has been scheduled or live.
You can review the statistics of each of your listings to see how many views they have had, reveals of your telephone number and enquiries.
ADD LISTING
To add a new listing click Add a Listing
Select a package:
Bronze – Free: One month listing to appear in Farm Machinery and on the website after the magazine is published.
Silver – £29 +VAT: One month listing to appear in Farm Machinery and on the website within 3 working days.
Gold – £49 +VAT: One month listing to appear in Farm Machinery and Agricultural Trader and on the website within 3 working days.
Fill in the fields, compulsory fields are marked with an *
Remember the first image you upload will be the feature image for the listing.
Please note the price instruction (+VAT etc) doesn't appear in the magazine unless you type this within the description.
Once you have finished, check the terms and conditions and click submit.
PROBLEMS?
If you face any issues regarding resetting your password or problems submitting a listing email jo.legg@flair-design.co.uk or call 07306 482166
TEAGLE 808S TOMAHAWK BALE PROCESSOR
£POA. Mounted – electric joystick controls
TEL: Adrian Weaver 07792 292889
RENAULT 75-34 4WD
£7,900 No VAT. a clean tractor for its age, everything works, only done 6796 hours from new, always been locally owned.
TEL: 01288 341326, Cornish Tractors
JOHN DEERE 6R 185
2023, £147,300. 1500 hours. 185hp, 50K, AutoPowr Tyres: NEW 540/65R30 650/65R42
TEL: 0808 164 7700, Farol Ltd
KRAMER KT457
2020, £67,140. 4998hours
TEL: 0808 164 7700, Farol Ltd
CASE RBX462 BALER (ROUND)
2003, £5,000. Serial No. - HBJ0038451
Auto-Lube 46201 Baler Net 6ft
TEL: 01476 590077, Chandlers Farm Equipment
DOOSAN DX 63-3
2017, £23,750. 4,329 hours
Manufacturing / Serial number
6001758 Gross Weight 6,250kg, 36kW Engine, Auto / hydraulic quick coupler Hammer/shear hydraulic circuit, Air conditioning, Slope hydraulic Rubber tracks, 2x Buckets
TEL: 07971952408, Diggers n dumpers
NEW TYRONE 14T DUMP TRAILER
£17,400. TEL: 01726 860332, Vincent Tractors & Plants
KUBOTA B1820 COMPACT TRACTOR
£8,394. TEL: 01726 860332, Vincent Tractors & Plants
HOLLAND T6.155 DC
2021, £62,000. Average condition
TEL: 01380 722381, TH White Machinery
NEW HOLLAND BOOMER 25
2017, £7,995. 4x4, PAS, 25HP. With only 695 Hours, Hydrostatic Gearbox, Folding Roll Bar, Grassland Wheels and Tyres, Rear Spool. One Owner From New.
TEL: 01233 732439, Kent Tractors
SIROMER COMPACT ROUND BALER
£3,995. 25-50HP Makes a 60x70cm round bale Three density settings
Three point linkage mounted & PTO powered (no spool valves required) Complete with PTO shaft Horn to sound the bale is ready Representing a huge saving from new list price The baler rolls the hay inside the chamber until it reaches a specific size. The baler then automatically wraps the bale with twine, before ejecting it out of the rear of the machine.
TEL: 01933 272662, Blacktrac Compact
NEW HOLLAND C337 TRACKED SKID STEER
£POA. Brand New, New Holland C337 Tracked Skid Steer Electronic
Hydraulic Control (2 Speed) Full Cab With Front Door Level 5 High Flow
Hydraulic Control Air Seat Road Lights
450mm Rubber Tracks High Flow AUX
Ride Control Self Level Multi Function
Electronic Control Hydraulic Locking Head Stock 78" Bucket
TEL: 01409 254040, Andrew Symons
JOHN DEERE 6250R
2020, £119,500. IVT Singles AutoPowr / IVT – 50 km/h 4600 CommandCenter AutoTrac Ready 4600 Processor
ComfortView Cab, with CommandPRO, with cab suspension Rear wheels size
710/70R42 Rear & front tyre brand
– Trelleborg 4WD front axle – TLS Plus with brakes Front wheels size
600/70R30
TEL: Stuart Vanstone 07711 440783, Mason King
JCB FASTRAC 4220
2022, £POA. 1610 hours
TEL: 01749 812628, Redlynch Agricultural Engineering Ltd
VIEW LOTS OF BARGAINS FROM THE TRADE ONLINE NOW AT www.farmmachinerybuyer.com
DEUTZ FAHR 5110G
£34,500. Front Weights. 3 Spools. Pick Up Hitch. Loader Ready. Passenger Seat. Air Con.
TEL: 01622 873331, Morgan Machinery World Tractors
NEW HOLLAND T7.210
2023, £85,000. 165/210 Hp/Kw
Serial No: END124284 Registration: HV23 YNP, 1322 hours, Power Command TEL: 01865 880866, CFS
MASSEY FERGUSON 6480
£37,200.
TEL:01580 291271, Mark Hellier
CAT TH407C TELEHANDLER
£26,500.
TEL: 01935 841307, Graham Holland Ltd Agricultural Machinery
JF STOLL 18 DIET FEEDER
£6,750.
TEL: 01935 841307, Graham Holland Ltd Agricultural Machinery
NEW HOLLAND ROLLBELT 150 ROUND BALER
2015, £12,500. TEL: 01935 841307, Graham Holland Ltd Agricultural Machinery CASE PUMA 150
2016, £35,000. 50kph
TEL: 01935 841307, Graham Holland Ltd Agricultural Machinery
JOHN DEERE 6R 215
2023, £179,940. Ex Hire, 1485 hours. 215hp Speed: 50K Trans: AutoPowr CommandPro Tyres: 600/70R28
650/85R38
TEL: 0808 164 7700, Farol Ltd
2022, £POA. 350 hours, 200 Drum hours
TEL: 0808 164 7700, Farol Ltd
JOHN DEERE 6R 195
2023, £203,940. 141 hours. 195hp Speed: 50K Trans: AutoPowr CommandPro Tyres: 710/70R42, 600/70R28
TEL: 0808 164 7700, Farol Ltd
NEW HOLLAND VM18-2SB DIET FEEDER
£POA. 14cube base, extension to 18cube, twin vertical augers, single axle, 435/50R19.5 tyres, hyd. brakes, X conveyor with L & R rise & fall, basic+ with additional hand held, WA pto, RH rear magnet, 2 speed gearbox, electric belt speed, 3 function electric remotes, road lights. 5 YEARS 0% offer.
TEL: 01308 862239, Francis Bugler
£POA. 25hp Yanmar 3cyl diesel – 4WD Sub-Compact, 2 range hydrostatic transmission, 25 litre fuel tank, power steering, 540 rear PTO, 2500 mid-PTO, 450kg lift, ROPS Roll bar, headlights, rear lights & indicators, 26×12.0-12 & 18×8.50-10 turf tyres. Fitted front loader with bucket & mid mower.
TEL: 01297 34319, Francis Bugler
2015 HE-VA 4M DISC ROLLER
2015, £15,750 +VAT. Hydraulic folding, tidy machine
Serial Number: 34788
TEL: 01763 780440, Oakfields
JOHN DEERE 6155M AUTOQUAD
2017, £64,500 +VAT. Only 3065 hours, full suspension! Very tidy and low hour machine. 40kph AutoQuad, 3 double spools, pick up hitch, TLS and mechanical cab suspension. Full set of work lights, swivel front fenders and premium heated air set. On very good Michelin Multibib tyres - 540/65R28 fronts and 650/65R38 rears.
TEL: 01763 780440, Oakfields
FREE FARM ADS
1.
If you are already a registered user, please reset your password.
TRACTORS
GREY FERGUSON
1951, £1,750 No VAT. Good runner, new battery, plugs leads and points. New fuel tap and glass bowl Reg No Gut 978.
TEL: 07887 901369, Kent 481
ISEKI 2160
£2,160 No VAT. 4x4 compact tractor 21hp cash on collection
TEL: 07989 175121, Buckinghamshire 438
KUBOTA L5030 GST
2006, £12,250 +VAT. 5418 hrs, 52hp, 4WD, 12 speed shuttle gearbox plus creeper box. 95% Bridgestone Agric Tyres, A/C, P/U hitch, Cat 1 lift arms, 2 spools, weight frame. 58" wide. Tidy and ready for work. 15mins from Dartford Crossing in Kent.
TEL: 07900 558964 507
MASSEY FERGUSON 575
1981, £4,000 +VAT. Comes with loader and ballast weight. Multipower. Has worked everyday for the 40 years I have owned it. Used working order
TEL: 07709 796147, Surrey 405
FEATURED
CASE DEX
POA. Running. TEL: 07855 399487, South West. 123842
DAVID BROWN 1210
£5,000. In excellent working order. New tyres, clutch, and battery. Complete with David Brown power loader. Owner retiring due to ill health. TEL: 07776 210671, West Midlands. 123564
FORD 8210 SERIES II
£19,995. Very good original condition. Cab and panels very good, 90% BKT tyres, Air Con, V5. Please call 07779986072, South West. 123474
2. EMAIL
Send your listing to fmfreead@kelseyclassifieds.co.uk Make sure to include your contact details
DAVID BROWN 885
£4,500. In good working order, good tyres. Lights all working.
TEL: 07732 790375, West Midlands. 123284
FERGUSON T20
£2,750. Petrol TVO. Original 6 volt system. Tyres 90%. Brand new battery, complete with pick up hitch. Older restoration. In good working order. Cash or bank transfer on sale.
TEL: 07778 860114, South West. 123860
Designed to ensure you get the Power of C-T-R, i.e. Low compaction, High Traction and High Roadability. Aimed to give you an all-round performance and peace of mind. Due to their flexible sidewalls, superior construction, higher tread arc width & higher inner tyre volume, our radial tyres help reduce soil compaction. Their dual lug angle design with more lug overlap gives it superior traction and better roadabilty. The Bias range
The high traction farm & agriculture vehicle front and rear bias tyres are developed for mighty performance over hard and black soil for sturdy crop that leaves behind strong stubbles. Properties of self-cleaning, improved puncture resistance and longer tyre life assures farmers of a tension free usage. Working on fields across the world, our Bias tyres come in 4 ranges to suit different terrains.
FORD 4100 2WD TRACTOR
£3,995. Starts and drives well, power steering, good tin work, needs linkage arms.
TEL: 07779 986072, South West. 123472
COUNTY 1184 LWB
1980, £58,000. New wheels and tyres 600/65R 34. Cab refurbished, full forestry spec.
TEL: 01823 432867, South West. 123298
FORD 7810 SILVER JUBILEE SERIES II
£39,995. A rare variant of this already very rare and sought after tractor. Good order, Analogue Dash, V5. 5378 hours. Import. On farm condition.
TEL: 07779 986072, South West. 123473
MARSHALL 804XL
POA. Excellent condition. No time wasters. No what is your best price. Serious offer will be considered on viewing only. For viewing please contact: rmdengineering@outlook.com
TEL: 07976 686843, South East. 123954
MASSEY FERGUSON 35
1958, £4,200. Runs well it's got V5, used for topping gardens for Oxford Council years ago. Is stored indoors.
TEL: 07896 287436, Wales. 123540
MASSEY FERGUSON 148
1975, £12,400 Rarer and much sought after larger version of MF135. Fully overhauled including rebuilt engine. Extensive list of new parts and work done. New tyres all round. Now in show condition. Auto PUH. 8 - speed.
V5C. Delivery possible.
TEL: 07970 918811, South East. 123854
MASSEY FERGUSON 35
1961, POA. With loader and bucket and topper in full working order.
TEL: 01380 816253, South West. 123693
MASSEY-HARRIS PACE MAKER
POA. Running.
TEL: 07855 399487, South West. 123848
NUFFIELD 425
1969, £4,250. With V5 doc, as new tyres and rear wheel weights fitted, excellent original condition, comes with David Brown 2 furrow plough (used for working days) or can split.
TEL: 07842 594874, Yorkshire and the Humber. 123337
NUFFIELD DM4
1955, £2,350. Rebuilt engine, injectors and injector pump. Fair condition, body work good, rear mudguards have some rust.
TEL: 07449 457709, South East. 123410
COMBINES
NEW HOLLAND 8040
1981, £4,000 +VAT. 12ft header with trailer. Good reliable machine. Barn stored. 2 local owners
TEL: 07709 796147, Surrey 406
TELEHANDLERS
MANITOU 625-75 TELEHANDLER
2014, £24,500 +VAT. 6k hrs, good working order, compact, Kubota engine.
TEL: 07774 112211, Longhope 493
www.farmmachinerybuyer.com
FARM MACHINERY
Kelsey Media, The Granary, Downs Court, Yalding Hill, Yalding, Maidstone, Kent, ME18 6AL 01959 541444
EDITORIAL
Rebecca Farmer
Email: fm.ed@kelsey.co.uk
ADVERTISING & MARKETING
Jamie McGrorty 01303 233883
jamie.mcgrorty@kelsey.co.uk
GRAPHIC DESIGN
Jo Legg: Flair Creative Design jo.legg@flair-design.co.uk 07306 482166
MANAGEMENT
DIVISIONAL MANAGING
DIRECTOR: Steve Kendall
PUBLISHER: Jamie McGrorty
RETAIL DIRECTOR: Steve Brown
SUBSCRIPTION MARKETING
MANAGER: Claire Aspinall
PRINT PRODUCTION MANAGER: Kelly Orriss
DISTRIBUTION
Distribution in Great Britain: Seymour Distribution Limited 2 East Poultry Avenue, London EC1A 9PT Tel: 020 7429 4000 www.seymour.co.uk
Distribution in Northern Ireland and the Republic Of Ireland: Newspread Tel: +353 23 886 3850
Kelsey Media 2024 © all rights reserved.
Kelsey Media is a trading name of Kelsey Publishing Ltd. Reproduction in whole or in part is forbidden except with permission in writing from the publishers. Note to contributors: articles submitted for consideration by the editor must be the original work of the author and not previously published. Where photographs are included, which are not the property of the contributor, permission to reproduce them must have been obtained from the owner of the copyright. The editor cannot guarantee a personal response to all letters and emails received. The views expressed in the magazine are not necessarily those of the Editor or the Publisher. Kelsey Publishing Ltd accepts no liability for products and services offered by third parties.
Kelsey Media takes your personal data very seriously. For more information on our privacy policy, please visit www.kelsey.co.uk/privacy-policy/ If at any point you have any queries regarding Kelsey’s data policy you can email our Data Protection Officer at dpo@kelsey.co.uk
FREE FARM ADS
WHEELS & TYRES
FIRESTONE REAR TYRES
2010, £125. Firestone 420/85r38 good tread. One has a patch repair inside. TEL: 07989 235447 492
INTERNATIONAL WHEELS
£150. Pair of International wheels only for tyre 14-28 TEL: 078366802, Kent 457
PAIR OF WHEELS
£200. Wheels from Ford 4610 to take 12. 4- 11 x 36 Tyres. Buyer to collect TEL: 07836 6802, Kent 447
TYRES
£50 +VAT. 2x 13.6/65-18 £50 TEL: 07762 713003, North Kent 496
TYRES
£50 +VAT. 2x 11.5/80 - 15.3 TEL: 07762 713003, North Kent 498
OTHER
2020 ALUM-LINE 26X8
2020, 21,500 incl VAT. Horse trailer. 26x8. Speciality trailer w/ 11ft animal hauling space with roof vents and tie rails. 15' of space up front with door going to animal area w/ AC, fold-out window, camper style door and screen door, awning. Ramp on near as well as slider inside rear door. 1 owner trailer, well maintained. TEL: 07199 821141, Roanoake 432
3 PIECE CAMBRIDGE GANG ROLL
£400. Used condition. TEL: 07709 796147, Surrey 409
6FT MX SHEAR GRAB
£850 +VAT. 6ft MX Shear Grab for sale. No longer need. In working order. Viewing welcomed.
TEL: 07854109331, Kent 452
8' GATES AND POSTS
£100 +VAT. Pair of 8' gates and posts Good condition TEL: 07762 713003, North Kent. 495
9FT CUTLASS TOPPER PORT AGRIC
WANTED
Tractors, Diggers, Farm Clearances and Agricultural Machinery
35 Years experience. Professional service. Immediate valuation, payment & collection. Tel: Andrew Hooker 01233 732439
£1,000 +VAT. Barn stored
TEL: 07881828083, Surrey 345
9FT MCCONNEL ROTARY TOPPER
2005, £1,200 +VAT. Viewing welcomed.
TEL: 07854 109331, Kent 450
ARC WELDER
£50. Barely used with helmet TEL: 07583 078354, Haywards Heath, West Sussex 443
SPECTRUM CARAVAN
£1,500. Twin axle - length of Caravan 22ft-6ins overall length with tow bar 25ftSleeps 4 to 6 Comes with cooker, fridge, heater, cassette toilet, electric caravan hook up cable, waste master carrier, water roll carrier awning tent pegs and ground sheet, spare wheel, battery. TEL: 07912 291528, Kent
VAN BODY ON CHASSIS
£250 +VAT. TEL: 07798 520938, West Sussex
£15. Various sizes TEL: 07748 840049 –no text messages
£8 each. Quantity of blacksmiths tools. Viewing welcome TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 469
£150. A pair of British bull dog stone statues TEL: 07748 840049, no text messages
www.kelsey.co.uk
WAYS TO SUBMIT YOUR FREE LISTING
BROWNS TURNOVER YARD SCRAPER
£300. Excellent condition with new rubber
TEL: 07709 796147, Surrey 514
CHESTNUT FENCING STAKES
POA. Mixed halves and quarters. 10/12cm tops. National delivery available. TEL: 079852 98221 www.cwpfencing.co.uk.
CASTROL OIL TANK
TEL: 01825 723272, Sussex. Leave number and we will get back to you
CHICKEN HOUSE
£55. Viewing welcome TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 474
CHICKEN HOUSE AND RUN
£55. Viewing welcome TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 476
COLLECTION OF OIL CANS AND PUMPS
£30. Job lot of oil cans and pumps TEL: 07583 078354, Haywards Heath, West Sussex 442
1. ONLINE
Register an account at www.farmmachinerybuyer.com
COMPLETE LISTER PETROL STATIONARY ENGINE
£120. Collection only. Cash on collection.
TEL: 07719 702154, West Sussex 453
COLLINSON 11T FEED STORAGE BIN
£500 +VAT. Good working order. Buyer to remove TEL: 07709 796147, Surrey 408
CROWN 'ALWAYS ORCHID' PAINT
£8. Matt 2.5 litres Opened, but now surplus to requirements.
TEL: 07510 139126, East Sussex 484
2. EMAIL
Send your listing to fmfreead@kelseyclassifieds.co.uk
Make sure to include your contact details
DOWDESWELL 4+1 REVERSIBLE PLOUGH
£900 +VAT. Has been used here on farm over the years but no longer needed. Viewing welcomed TEL: 07854 109331, Kent 448
ENDURA SPRAYER
£90 +VAT. For Quad bike Good condition TEL: 07762 713003, North Kent 500
2.8M ORSI FLAIL TOPPER
2005, £1,850 +VAT. Hydraulic offset, heavy duty hammer flails, ideal for grassland or light scrub. TEL: 07921 101598, Hampshire 440
DIVIDERS AND LOADING RAMP
£180. 1x dividing gate ( to use on the top or bottom decks) and a set of loading ramps to fit an Ifor Williams DP120 livestock trailer
TEL: 077986 31567 or 07444 621694, near Ashford, Kent 477
FARM GATE £40. 10ft TEL: 07912 291528, Kent 456
FREE FARM ADS ONLINE
FORD NEW HOLLAND 655C DIGGER
UPGRADE
YOUR LISTING
BRONZE
Your listing will appear in the magazine and online a week after publishing in print.
SILVER
For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly.
GOLD
For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*.
*Allow up to 3 days for processing.
1989, £2,500 +VAT or offers. Old but still works, been used for small jobs on farm. Four wheel drive. Extendable rear digger V5 and users manual. Collector's tractor?
TEL: 07899 892513, Basingstoke, Hampshire
FORD TRANSIT TIPPER
2010, £2,600. 60 plate. MOT until December.
TEL: 07748 840049, no text messages 363
FORKLIFT TIP SKIP
£180. Viewing welcome TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 463
GATES
£100 +VAT. 2x 12' Gates
Good condition
£50 +VAT 1x 10' Gate
TEL: 07762 713003, North Kent. 497
GENERATORS
£150 for both. 1x Honda and 1x unknown make. Collection only. Cash on collection.
TEL: 07719 702154, West sussex 454
GRAYS ROLLER
£900 +VAT. Water filled. 8' x 30"
TEL: 07762 713003, North Kent. 503
HAY MAKING EQUIPMENT
£3,250 No VAT. Full hay making equipment for sale Vicon mower conditioner, small haybob, John Deere baler 342A and Flat Eight bale grab. Collection only, loading available, West Sussex Hampshire border.
TEL: 07956 925608, Hampshire 402
HOLLOW BREEZE BLOCKS
£3 each. The Blocks formed part of an internal wall, so have some sandy mix cement on them
TEL: 07510 139126, East Sussex 204
HONDA WATER PUMP
£100. Good running order Collection only. Cash on collection.
TEL: 07719 702154, West sussex 455
HOP PICKING BIN & SKUPPETT
£25. Bin £25
£20. Skuppet. Viewing welcome
TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 471
IFOR WILLIAMS TT105G 10FT TIPPING TRAILER
POA. 10ft x 5ft trailer in very good condition. Hardly used and always stored inside. Viewing welcome
TEL: 07765 950944 Cranbrook, Kent 437
IFOR WILLIAMS DP120 LIVESTOCK TRAILER
£1,600. 3.5 tonne livestock trailer, complete with dismountable decks. Tyres all good and brakes and electrics all working. Body can be dismounted to allow usage as a flat bed trailer also, viewing welcome
TEL: Martin 07885 306055 (please phone -NO TEXTS), Ashford, Kent 466
12FT IFOR WILLIAMS TRAILER
£1,900 +VAT. 12ft Ifor Williams Trailer with sheep decks and cattle division gate TEL: 07885 226519, Surrey
INTERNAL GLASS DOOR
£10. With glass partitions. TEL: 07510 139126, East Sussex
FEATURED LISTING
GURNEY REEVE / SUTON SYCLONE HDS7 7FT ROAD/YARD SWEEPER
£1,800 +VAT. Hydraulically powered brush and hydraulic bin empty. Mounted on tractor with 3 point linkage. Very lightly used, dry stored, fully working. This sweeper is still made by Gurney Reeve and a water kit is available from them if required.
TEL: 01364 631069, Devon 267
2023, £24,500 Offers considered. Only 25 hrs, as new, road registered, diesel, massive saving.
TEL: 07774 112211, Longhope 494
KOMATSU PC40
£5,250. 4 Ton Mini digger complete with 4 Buckets
TEL: 07860 366802, Kent 461
MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
KRM SEED OR SLUG PELLET SPREADER
£300 +VAT.
TEL: 07762 713003, North Kent.
KIDD 10FT WATER BALLAST ROLL
£600 +VAT. Excellent working condition
TEL: 07709 796147, Surrey 407
KONGSKILDE CULTIVATOR
£150 +VAT. 11' wide Good condition £150
TEL: 07762 713003, North Kent.
KRONE AM 243S EASY-CUT DISC MOWER
2011, £2,000 +VAT. Has been used each year with no issues. It is now no longer needed. In working order, viewing welcomed.
TEL: 07854 109331, Kent
449
KUHN FERTILISER SPREADER
£300 +VA.
TEL: 07762 713003, North Kent.
501
ANIMALS FOR SALE
DUCKLINGS
From £10 each. Indian Runner and Aylesbury, Viewing welcome TEL: Martin: 07885 306055 please phone (no texts), Ashford, Kent.
465
OXFORD SANDY AND BLACK BOAR
2020, £50 Offers considered. Nearly 4 years old boar. Haven’t got sows for him, looking for a good home TEL: 07989 235447
490
OXFORD SANDY AND BLACK WEANERS
2024, £50. TEL: 07989 235447
491
PEDIGREE POLLED HEREFORD BULLS
POA. Top quality, quiet, easy calving bulls with good structure, high carcase values and rapid growth rates. From low risk TB area. All bulls scanned, weight recorded and blood tested for IBR, BVD, Lepto and Johnes. BVD vaccinated. HCS Superior carcase sires, all bulls qualify for meat scheme premiums. TEL: 01243 262252 or 07881 944394, West Sussex.
275
POL HYBRID PULLETS
£15 each. Viewing welcome TEL: Martin: 07885 306055 please phone (no texts), Ashford, Kent.
464
PEDIGREE ABERDEEN ANGUS BULL
£1,500 Offers considered. Genuine reason for sale. Excellent stock getter. Big boy. Too good for slaughter.
DOB 23/11/18
TEL: 07775 835239, East Sussex 425
PEDIGREE SIMMENTAL BULLS
£3,000 ovno. 2 pedigree homebred simmental bulls. 15 and 17 months old. TEL: 0753 4390320, Fordingbridge 435
POINT OF LAY HYBRID PULLETS
POA. Various breeds and colours including Black Rock, Light Sussex, discount for quantity
TEL: 01795 532848 / 07759 320496, Faversham, Kent. 302
PUREBRED CHICKS
From £8 each. Growers, large fowl and bantams. Viewing welcome
TEL: Martin: 07885 306055 please phone (no texts), Ashford, Kent. 472
SUFFOLK X MULE TEGS - 120
£190. Well grown, on Heptavac P System, Electric Fence Trained. Will consider selling in smaller lots. Local delivery possible.
TEL: 07715 651766, Ashford, Kent
439
YEAR OLD HENS
£3 each.
TEL: 07721 748156, Sevenoaks, Kent 373
DONKEY WANTED
Wanted. Bugsy needs a companion. If you have a Donkey that needs a friend, we have a home waiting with Bugsy.
TEL: 07530 972607, Kent
HOW TO SPOT A SCAM ADVERT
CAUTION
We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.
1. SPEAK TO THE FARMER
Always look into whether an advertiser appears legitimate.
2. VIEW THE ITEM If you can, view the item on the farm first.
3. AVOID ERRORS
Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.
5. NEVER PAY IN ADVANCE
Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.
6. PAYMENT
Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.
Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.
FREE FARM ADS ONLINE
LAND ROVER DEFENDER 110 TDS
2002, £11,750 +VAT. Land Rover Defender 110 TDS pick up 128,000 miles
TEL: Dave 07913722085, Kent
MF 100/200/500 SERIES DUAL CLUTCH
£100. Brand new. TEL: 07709 796147, Surrey
MF 255P MOWER
5. SUBMIT LISTING
For paid listing, submit payment details to complete the process. For free listing click "SUBMIT LISTING" to complete the process.
6. MY LISTINGS
You will find your listings here once submitted: Scheduled – Your listing has been processed and is waiting to go in the magazine before going live Pending – Your listing is waiting to be processed Expired – Your listing has come to the end of it's month online.
You can edit your listing once it has been processed. Once your listing has expired you can re-list.
2016, £3,750 +VAT. 1 owner from new. Perfect working order and well maintained. Excellent machine.
TEL: 07709 796147, Surrey
MF BOMFORD SUPERFLOW 7-LEG CHISEL PLOUGH
£500 +VAT. Good working order. Sold with some spare parts
TEL: 07709 796147, Surrey 404
07956 925608, West Sussex Hampshire
MAMMUT TRACTOR MOUNTED CONCRETE MIXER
£1,850 +VAT. Little used, excellent condition
TEL: 07778 050516.
MANHOLE COVERS
MCCONNEL SHAKERATOR
£2,000. 2 New legs flexicoil roller
TEL: 07798 520938, West Sussex
NEW CORRUGATED SHEETS
£500 job lot. 50x 6ft
Strong gauge metal Curved Corrugated Sheets
TEL: 07719 779597, Near Gravesend, Kent.
OPICO 5M HARROW WITH SEEDER
2006, £4,400. TEL: 07402 031199, Billingshurst. 511
ORIGINAL FARRIERS TOOLBOX
GARFORD CAMERA GUIDED ROBOTIC HOE 2017, £16,000. Camera guided Robotic hoe . 3 rows. For between rows and inter row weeding. Used on small acreage of organic vegetables. Excellent condition. TEL: 01621 779500, Essex
£200 ovno. In working order but needs new PTO shaft, buyer collects TEL: 07788 720484. West
Kent
292
RAILWAY SLEEPERS
£40 each. Used Grade A sleepers
TEL: 01892 723895 / 07980 585307, Brenchley 487
RATCHET STRAPS
£15. Various heavy duty road grade manhole covers TEL: 07748 840049 no text messages
£40. Farriers Elm Tool Box. Viewing welcome
TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 467 PERFECT PULVERISER
£60. Four Heavy duty ratchet straps, all in good condition
TEL: 07583 078354, Haywards Heath, West Sussex 441
Register for your free account. For existing users, please reset your password
£695. Rhino HPHD PTO Post Hole Borer tractor mounted, heavy duty, viewing welcome, TEL: 07444 621694, Ashford, Kent 478
SECTIONAL RUN
£250. Sectional poultry run 8’6 x 9’6, complete with roof. Viewing welcome
TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford, Kent 473
MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
SHELBOURNE REYNOLDS MIXER WAGON
2010, £6,000 +VAT. 13m3 mixer wagon, elevating cross front conveyor, electric controls, magnets, relined, new belt & blades in 2022 done little work since. Some wear holes to tub prior to lining.
TEL: 07765 246400, Hailsham, East Sussex 489
SHEPHERDS HUT
£1,000 Offers considered. Viewing welcome. Great project.
TEL: Rachel 07976 597224, Hook, Hampshire 431
£600 No VAT. New Ram and Hydraulic Pipes. TEL: Jack 07900 651578
SOFT STEEL GATES
£5. For possible upcycling TEL: 07510 139126, East Sussex 483
SPRAYER FOR ATV
£80. Sealey sprayer for use on a quad/ATV, barely used TEL: 07583 078354, Haywards Heath, West Sussex 444
STABLE DOOR
£30. Solid stable door 110cm (3'7") wide, 135cm (4'5") high. Comes with hinges. TEL: 01892 863448, Kent 427
SUMO GLS 4 PASTURE SUBSOILER
£9,500 +VAT. Barely used, like new. Viewing Welcomed. TEL: 07854 109331, Kent 451
TAKEUCHI TB125 2.8 TONNE DIGGER
£10,995 +VAT. 2700hrs excellent condition, low hours, good tracks, strong hydraulics, ideal weight, recently serviced, viewing welcome
TEL: 07444 621694, Ashford, Kent 479
BLADES
£40. Set of blades for 8ft Teagle Topper TEL: 07836 6802, Kent 458
TEAGLE SUPER TED TEDDER
2005, £1,500. TEL: 07402 031199 Billingshurst 510
TIPPING TRAILER
£750 ono. Circa 11ft by x 7ft, kept under cover, good condition.
TEL: 07803 192411, Guildford area 509
FORTHCOMING SALES
FORTHCOMING SALES
Further entries invited
Further entries invited
Saturday 3rd August 2024
Saturday 3rd August 2024
Little Washbrooks Farm, Hurstpierpoint
Little Washbrooks Farm, Hurstpierpoint
Dispersal Sale inc Kubota BX2350 compact tractor excellent condition, Massey Ferguson 120 with foreloader, Nissan 25 forklift, Ornamental garden stone, planters, sundial, water features, benches & timber etc workshop tools, livestock equipment
Dispersal Sale inc Kubota BX2350 compact tractor excellent condition, Massey Ferguson 120 with foreloader, Nissan 25 forklift, Ornamental garden stone, planters, sundial, water features, benches & timber etc workshop tools, livestock equipment
On behalf of Mrs P Kean & others
On behalf of Mrs P Kean & others
Saturday 10th August 2024
Saturday 10th August 2024
Ham Lane Farm, Scaynes Hill
Ham Lane Farm, Scaynes Hill
Dispersal Sale of Modern Power Farm Machinery
Dispersal Sale of Modern Power Farm Machinery
inc ‘12 Claas Arion 620, ‘07 Claas Ares 627, McCormick CX100 with foreloader, JCB loading shovel, Thwaites dumper, Two quad bikes, Ten arctic dump & tipping trailers, Slurry tanker, Hay making tackle viz Claas front & side mowers, Three rakes/tedders, Lely Rotonde 510 DC, Claas Eurolift 90 eight rotor, Lely RP435 baler, Supa-Pac wrapper, Opico tine harrows, Lemkin 12 power harrow virtually as new etc
inc ‘12 Claas Arion 620, ‘07 Claas Ares 627, McCormick CX100 with foreloader, JCB loading shovel, Thwaites dumper, Two quad bikes, Ten arctic dump & tipping trailers, Slurry tanker, Hay making tackle viz Claas front & side mowers, Three rakes/tedders, Lely Rotonde 510 DC, Claas Eurolift 90 eight rotor, Lely RP435 baler, Supa-Pac wrapper, Opico tine harrows, Lemkin 12 power harrow virtually as new etc
On behalf of WM Cleverly retiring from farming
On behalf of WM Cleverly retiring from farming
Saturday 31st August
Saturday 31st August
South of England Showground, Ardingly
South of England Showground, Ardingly
Collective Sale of Machinery, Plant, Livestock & Horticultural Equipment etc
Collective Sale of Machinery, Plant, Livestock & Horticultural Equipment etc
Friday 27th September 2024
Friday 27th September 2024
Woodhouse Farm, Henfield
Woodhouse Farm, Henfield
Reduction Sale of Vintage & Classic Tractors, Land Rover, Arable Kit, Agri Collectables, Engines, Generators & Machinery Spares
Reduction Sale of Vintage & Classic Tractors, Land Rover, Arable Kit, Agri Collectables, Engines, Generators & Machinery Spares
On behalf of Mr & Mrs C Broucke
On behalf of Mr & Mrs C Broucke
Saturday 5th October 2024
Saturday 5th October 2024
Townings Farm, North Chailey
Townings Farm, North Chailey
Dispersal Sale of Machinery, Livestock Equipment & Contents of Farm Shop: Fridges, Display Units & Butchers Equipment etc
Dispersal Sale of Machinery, Livestock Equipment & Contents of Farm Shop: Fridges, Display Units & Butchers Equipment etc
On behalf of RD Uridge Farms retiring from farming
On behalf of RD Uridge Farms retiring from farming
Please contact the Market Office on 01323 844874 for more information
Please contact the Market Office on 01323 844874 for more information
FREE FARM ADS ONLINE
USED TELEGRAPH POLES
£80 each. TEL: 01892 723895 / 07980 585307, Brenchley 486
USED TELEGRAGH POLES
Choose
£50 to £70 each. Various lengths and diams. Ideal for many projects around farm and garden. TEL: 07814 211671, South of Guildford 462
5. SUBMIT LISTING
For paid listing, submit payment details to complete the process. For free listing click "SUBMIT LISTING" to complete the process.
6. MY LISTINGS
You will find your listings here once submitted: Scheduled – Your listing has been processed and is waiting to go in the magazine before going live Pending – Your listing is waiting to be processed Expired – Your listing has come to the end of it's month online.
VAN LOADING RAMP
2003, £1,250 incl VAT. WM Systems ME100 loading ramp 1000kg capacity. Folds up nicely, easy to put down. Very good condition, now removed from van, viewing buy appointment TEL: 07736 156948, Kent
VARIOUS POULTRY CRATES
£20 each. X5 plastic poultry crates £25 each X3 metal poultry crates TEL: 07748 840049 no text messages
VINTAGE LIGHT GREEN CUPBOARD
WESSEX SC18 LAWN PASTURE SWEEPER
£1,000 No VAT. Been barn stored for last two years collection only loading available
TEL: 07956 925608, Hampshire
403
WINDOW FURNITURE
£80. Black iron window furniture. 10 window stays, 8 latches, 4 slide bolts, with selection of black screws. TEL: 01892 863448, Kent
428
WOOD LAYTHE
£240. Woodside 5 speed wood lathe (WL-12037) Viewing welcome
TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 468
WOODEN PARTITIONS
£5 each. Part Chipboard and part Plywood on a wooden frame 4 available TEL: 07510 139126, East Sussex 374
WROUGHT IRON GATE
You can edit your listing once it has been processed. Once your listing has expired you can re-list. WANTED
4x4s, Trucks, Vans, Lorries, Diggers, Dumpers, Tractors, Forklifts, Generators, Ifor Williams Trailers Good or bad Call Ken on: 07708 786366 or 01233 720725 Email: kenperkins@hotmail.co.uk
YARD GATES
£800. Site gates 6 metre opening with posts ready to hang
TEL: 01892 723895 / 07980 585307, Brenchley 488
X2 SOLWAY LARGE RECYCLING BINS
£250. Excellent working order.
TEL: 07709 796147, Surrey
CLAAS DISCO MOWER
£2,500 +VAT. 2.5 metre cut Good condition
TEL: 07762 713003, North Kent.
POA. In good condition and shape and in good running order. Like new, still working, no damage, been very handy to have for farmer or for horses land, it's never let us down.
TEL: 07854 440159, South East. 123678 FEATURED LISTING WANTED PICKUP
803
All makes and models considered any age / any condition, runners/non runners etc good prices given, all paperwork completed too satisfactory, cash or BACS payment, recovery collection most areas covered. Kent based. TEL: 07542 420700,
£40. Light Green Cupboard 'Whiteleaf Modern Furniture' Two Drawers Two Doors . TEL: 07510 139126, East Sussex
£60. Very heavy wrought iron gate. 89" (225cm) tall, 54" (137cm) wide. TEL: 01892 863448, Kent
£12,500. Super 3 to 3 1/2 ton 160 2004. Brought and owned 2 years ago and never used. Still like new, sale due to bereavement. TEL: 07765 445206, East of England. 123560
FORELOADER 1984, Wanted. To fit a Ford 4630 (the one with a deluxe cab) Please contact with what you've got TEL: 07787 116827, East Sussex 424
FREE FARM ADS ONLINE
HOW TO SPOT A SCAM ADVERT
CAUTION
We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.
1. SPEAK TO THE FARMER
Always look into whether an advertiser appears legitimate.
2. VIEW THE ITEM If you can, view the item on the farm first.
3. AVOID ERRORS
Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.
5. NEVER PAY IN ADVANCE
Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.
6. PAYMENT
Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.
Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.
BENFORD TV90 DOUBLE DRUM VIBRATING ROLLER DIESEL
£2,500. Excellent order. Pick up.
TEL: 07765 445206, East of England. 123574
RIGGER AND CULTIVATOR
£140. Rigger and 9 tines cultivator in average to good condition.
TEL: 07900 617630, Wales. 123639
MASSEY FERGUSON 20 BALER
POA. In good clean working condition, baled 470 last year never missed a beat.
TEL: 01686 650344, Wales. 123344
INDUSTRIAL PRESSURE WASHER
Open to offers. KEW 1500 pressure wash, complete with lance, hose, some new nozzles and new water connectors, spares or repair, too good to scrap.
TEL: 01892 750326, South East. 123968
WESTMAC RK1650
£250 No VAT. Two drum mower. Cutting width 1.65m, 5'6"
TEL: 07521569363, Hassocks 515
FEATURED LISTING
UPGRADES NOW AVAILABLE
FLEMING FERTILISER SPINNER
£495. In good condition and shape and in good running order.
TEL: 07854 440159, South East. 123455
RANSOMES FIRST SELF LIFT PLOUGH
1919, £800. Complete and in original condition. Good condition. Has been used but not for some time. Boards in good order.
TEL: 01256 882571, South East. 123626
FORD EPJ PLOUGH
1952, £400. All complete. Good boards - 168s. New skims and landslides.
TEL: 01256 882571, South East. 123627
LAND ROVER SERIES 3
1977, £12,000. LWB Safari 2 1/4 diesel. Two owners from new. F.S.H. New chassis. Rebuilt engine. Genuine reason for sale.
TEL: 07710122434, East of England. 123957
MASSEY FERGUSON 40 LOADER WITH BUCKET AND SIDE MOUNTINGS
£485. Very nice MF 40 loader recently repainted in functional order comes with a bucket. Tidy piece of equipment. Please call 01666838414, South West. 123349
QUAD TRAILER
POA. In good condition and shape and in good running order.
TEL: 07854 440159, South East. 123674
MASSEY FERGUSON SPRING TINE CULTIVATOR
£400. Fully working condition with complete full set of tines and points. All points are in good condition with none bent or damaged. Badge present with serial numbers. Cat 1 and 2 pins with little wear. Older restoration. Complete history. No time wasters.
TEL: 07742115894, South East. 123962
MASSEY FERGUSON INDUSTRIAL FENDERS
£250. Original. Collection only. Telephone between 9am - 6pm.
TEL: 07831665757, West Midlands. 123251
Your listing will appear in the magazine and online a week after publishing in print.
SILVER
For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly.
For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*. *Allow up to 3 days for processing.