JCB 8008 micro digger 0.8 tonne, expanding tracks, extending blade, 3 cylinder Perkins eng only 810hrs, c/w 3 buckets £6750
Bell Agricultural Ltd Support That Lasts a
Tractors
*Used* Deutz 6180,16 reg, FL, front pto
*Used* Deutz 7250,16 reg, FL, front pto, 3500hrs
£55,000
£75,000
*Used* Deutz 62 15TTV 18 reg, 3000hrs, full spec POA
*Used* Deutz 8280, full spec, 60k, front linkage, 710/70/42 80% tyres
*Used* John Deere 6170R 14 reg, 50k, 6,000 hrs
*Used* Ford 7810 series 3 air con H reg, 7600 hrs,
*Used* John Deere 6155R, 1150 hrs, full spec, 21 reg
*Used* John Deere 6920, auto power, TLS, 05 plate, front linkage/PTO
*Used* John Deere 6900 40k, R reg
*Used* John Deere 6330 07 reg, 40k, air con
*Used* John Deere 6330 10 reg, 40k, air con, 6500hrs
£27,500
£16750
*Used* John Deere 6330 10 reg, 40k, loader, air con, 6250hrs
Wheels
4x 580/60/22.5 wheel and tyre assemblies, ex Bateman sprayer
Baling & Tedders
*Used* Claas Variant round baler, nice condition
*Used* John Deere 862 round baler, 2011 (Nice)
*Used* John Deere 854 round baler
Claas 7.7m tedder, 2020, tidy
KV 9443 rake
KV 9439 rake
KV 8452 tedder
£13,300
£15,000
OLIVERS Luton
Tel: 01582 727111
2023 CLAAS TRION 730 MONTANA
£POA
Ex Demo, c/w V930 VARIO Header, 245/116 hrs, 25 kph, P/spreader, SPECIAL CUT, Swath former, CEMOS package CRUISE PILOT, FIELD SCANNER/LASER/AUTO PILOT ready, Dust Extr, ROTO PLUS Standard 4/6, Yield/ QMETER, piv XL unload spout,
OLIVERS Petworth Tel: 01798 343660
2019 CLAAS LEXION 770 TT £242,750 V1230,30 kph,2,705 / 1,070 hrs,RHVknife,C-Bar Brake, Dust Extractor,Yield/Q Meter,Grainmeter,Telematics,Cruise control,Air Compressor,Power Spreader,Straw Chopper,Chaff Spreader,AutoCrop Flow,Belt feeder housingAUTO CONTOUR with cutterbar brake,Trailer hitch auto,Dust extraction for feeder housing,CRUISE PILOT,APS,4D-cleaning system,linseed rotor,3D hillside sieves,GRAINMETER incl.returns volume measurement with CEBI,Grain tank 13,500 litres,Grain tank unloading tube 4XL, Power spreader - SPECIALCUTchopper,S10 GPS steering
2021 CLAAS JAGUAR 950 4WD
Dust extraction for feeder housing MONTANA, Side risers for straw walker, 3D sieves, GRAINMETER incl. returns volume measurement with CEBIS display, Comfort seat air-suspended, Inclination sensor, CCM,
£235,000 PU300, 24 Blade Cylinder, 680/85 R32 Fronts, 540/65 R30 Rears, 1500 / 1200 hrs, 4WD, R/ Crop Press, Auto Shearbar, Auto Lube, Air Con, Corn Cracker, C/W XL spout extension, i36 grass header, Air horn, Rear camera with CEBIS display
OLIVERS Reading Tel: 01189 723741
OLIVERS Tingewick
2010 CLAAS JAGUAR 930 4WD
£95,000 PU300, 20 Blade Cylinder, 650/75R32 Fronts, 540/65R24 Rears, 5194 / 3323 hrs, 4WD, R/ Crop Press, Auto Lube, Air Con, Corn Cracker, Chopping drum Silage additive system with integrated tank, Pick up hitch NOT included
OLIVER
2018 CLAAS ARION 420
£36,850
2020 CLAASARION 650 CIS
£71,300
OLIVERS are a long standing family business with nearly 200 years of experience, we have many employees with over 30 years service with the company. In 1947 the business became the first independent CLAAS dealer in the UK, and has gone from strength to strength since that time. The last 4 years has seen significant growth resulting in an expanded sales territory and the addition of three new branches at Reading, Winchester and Petworth. As a result of this expansion OLIVERS has a number of exciting new career opportunities within the business and are looking to appoint new dedicated staff to fulfil the following roles:
40 kph, 100 HP, 5,550 hrs, 340/85 R24 Fronts, 420/85 R34 Rears, 3 Spools, Eco PTO, Air Con, Air brakes, P.U. Hitch, One owner, full dealer service history, been on a full service and extended warranty plan with OLIVERS since new.
Positions available at Petworth, Winchester, Reading & Luton
since new, excellent condition, full dealer service history
Due to the expansion of OLIVERS, we have exciting new opportunities for Experienced Service Engineers to join our growing team. You will play an important part in the servicing, maintenance and repair of CLAAS equipment to support our customers. A knowledge of combines, tractors and forage harvesters is desirable, however, full product training will be provided at the CLAAS Academy. More importantly, you will have the desire to provide the highest
50 kph, 184 HP, 3,550 hrs, 540/65 R28 Fronts, 650/65 R38 Rears, 3 Spools, Front suspension, Front Linkage, Eco PTO, Air Con, Air brakes, Electric Hyd, Power Beyond, Cab Suspension, CIS+ with colour display, 24/24 gear HEXASHIFT, GPS PILOT READY, Manufacturers warranty until 19/10/2025 or 4000hrs, One owner from new with full OLIVERS dealer service history, Very smart tractor
level of customer satisfaction, an ability to learn new skills and the willingness to succeed. In return, we offer an excellent package including a competitive salary, contributory pension plan, laptop with the latest diagnostic software, mobile wifi connection, mobile phone a dedicated service van and extensive holidays. If you would like to move forward with a highly successful dealer allied to a global brand we would like to talk to you.
All prices plus VAT | Selection of wheels, tyres, buckets, forks and weights. Tractors and Equipment always wanted. This is only a selection of equipment available. Please phone for more details & prices. Tel: 01233 861456 Mobile: 07711 162001
2014 Lemken Rubin 9 3M Good metal c/w rear crumbler and covering discs
2015 John Deere 6190R 50kph Autoquad with Air brakes, just 5735 hours. VG tyres, 3 SCVS
2020 John Deere 6155R Premium Edition, 50kph AutoPower, Front links & PTO, GPS, 3540H
2020 John Deere 6155R 50kph AutoQuad, front weight, 3 SCVS, SF3000 dome, 3475 hours
2012 John Deere 6115R 50kph Autoquad, front linkage, full sus, 3 SCVS, only 4299 hours!
1987 John Deere 2850 A nice original example. PUH, 2
Massey Ferguson 1080 2WD Runs and drives, power steering, multipower, 2 SCVS, great project!
2009 Chieftain Tri axle 20T C/w sprung drawbar, sprung axles and sprung ramps.
Keeble Delta 6M
brakes, rear steer axle, a big trailer!
J.G.F. Machinery Ltd
EXCAVATORS
Hitachi ZX210-6, 2018, 6100 hrs
Hitachi ZX210, 2019, 5980 hrs
Hitachi ZX225-6, 2018, 7000 hrs
Hitachi ZX210-3, 2009, 9400 hrs
Doosan DX225, 2009, 13000 hrs
Hitachi ZX130-6, 2017, 5500 hrs
Doosan DX140LC-5, 2018, 4200 hrs
Doosan DX140LC-5, 2018, 4900 hrs
Kubota KX080-4, 2019, 4300 hrs
Kubota KX080-4, 2017, 6350 hrs
Hitachi ZX85, 2019, 3300 hr
Hitachi ZX48, 2017, 5000 hrs
Hitachi ZX33U, 2018, 5000 hrs
Kubota KX008, 2021, 640 hrs
Kubota KX008, 2019, 1050 hrs (choice of 2)
TRACTORS
£44,000
£46,000
£43,500
£23,000
£21,500
£33,000
£30,950
£30,950
£30,000
£27,000
£30,500
£18,500
£16,500
£8,500
£8,500
John Deere 6150R, 2013, 7000 hrs, Direct Drive £36,000
BEAVERTAIL LORRY
Isuzu N75 190, 2015, 305,000 Ks, MOT Jan 2025, very tidy
2022, 2040hrs, Premium Edition, AutoPowr CommandPro, 50K, AutoTrac Ready with integrated SF600 receiver, Activations, TLS, HCS, air seat, A/C, 5ESCV,
11092301 JOHN DEERE 7R 310
2022, 1350hrs, AutoPowr, 50K, AutoTrac Ready, Activations, front and cab suspension, air seat, A/C, PUH, 4ESCV, front linkage + PTO W2/ESCV, air/hyd £196,750
£196,750
31091166 JOHN DEERE
11092301 JOHN DEERE 7R 310 2022, 1350hrs, AutoPowr, 50K, AutoTrac Ready, Activations, front and cab suspension, air seat, A/C, PUH, 4ESCV, front linkage + PTO W2/ESCV, air/hyd brakes, £196,750
41093537 JOHN DEERE 7R 290
2018, 3255hrs, Ultimate Edition, AutoPowr, 50K, AutoTrac Ready, Activations, Front & cab suspension, leather air seat, A/C, PUH, 5ESCV, front linkage W/1ESCV, 900kg £127,500
Fruit & Vineyard Tractors
NEW UNUSED CASE IH STOCK – 0% FINANCE
Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed,
80L + 36L dual hydraulic pump, 3 x rear remote valves and 2 x mid mount valves with ow diverters, cat 2 drawbar, premium air seat, BlueCab ltration with AC, high mounted road lights, 360/70R26 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders, halogen light pack.
£50,000. 1 + 2 payments of £10,319*
QUANTUM 80N. 91197659 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, 80L + 36L dual hydraulic pump, 4 x rear remote valves and 4 x mid mount valves with ow diverters, electronic draft control, cat 2 drawbar, premium air seat, BlueCab ltration with AC, high mounted road lights, 360/70R26 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders, LED light pack.
£53,500. 1 + 2 payments of £10,957*
QUANTUM 100N. 61197660 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, 80L + 36L dual hydraulic pump, 4 x rear remote valves and 4 x mid mount valves with ow diverters, hydraulic adj stabilisers with sway blocks for vineyard/narrow tractors, electronic draft control, hydraulic top link, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 360/70R28 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, dynamic front fenders. LED light pack.
£59,000. 1 + 2 payments of £12,002
QUANTUM 110F. M1200698 Horizontal exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, front axle suspension, 80L + 36L dual hydraulic pump, power beyond with free ow return, 4 x rear remote valves and 4 x mid mount valves with ow diverters, hydraulic stabilisers, electronic draft control, front linkage and pto, front power socket, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 380/85R28 adjustable rear wheels/tyres, 300/70R20 adjustable front wheels/tyres, guidance and telematics ready, ISOBUS ready, LED light pack.
£70,000. 1 + 2 payments of £14,222*
QUANTUM 120N. M1197661 Vertical exhaust with shield, 32 x 16 ActiveDrive 2 transmission, 3 speed pto with ground speed, hydraulic adj stabiliser and sway block for vineyard/narrow tractors, 80L + 36L dual hydraulic pump, power beyond, 4 x rear remote valves and 4 x mid mount valves with ow diverters, electronic draft control, hydraulic top link, front linkage and pto, front power socket, cat 2 drawbar, premium air seat, BlueCab ltration, high mounted road lights, 420/70R24 adjustable rear wheels/tyres, 280/70R16 adjustable front wheels/tyres, LED light pack. £70,100. 1 + 2 payments of £14,299*
*All gures quoted are subject to availability and VAT. The 0% nance is based on a maximum of 40% of the RRP after trade in or cash deposit. Manufacturers’ warranty. This offer runs until the end of August 2024. These prices are valid and correct at the time of printing but subject to any change in borrowing costs.
CONTACT your local Ernest Doe Power Area Sales Manager or Ernest Doe Power General Sales Manager, Ed Perry, on 07786 027337 or edperry@ernestdoe.com
The new CASE IH 9260
Built with industry-leading Axial-Flow® technology, the 260 Series combine features a more integrated, operator-friendly
spreader
The CASE IH Puma 260 CVX
KRM
It takes more than a powerful machine to drive profitability these days. You need a complete vehicle control and a premium cab with built-in luxury. And, while connectivity and remote management capability help you make better, data-driven decisions, the ability to manage and coordinate your fleet from everywhere takes the Puma 260 CVXDrive to the next level.
MARSHALL bale trailer range
The entire BC range is manufactured using modern techniques and materials for a robust and heavy-duty build. This is combined with a number of small details and standard features to produce trailers that are not only strong, but practical and
1.9
With over twenty five years’ experience E W McTrab provides readers with reviews and tips on the purchase of various pieces of machinery.
STRAIGHTFORWARD DRILLS. EASY TO UNDERSTAND CHOICES
Evesham based Weaving offer two types of mounted tine drill, the coil sprung Tine models and, for lower disturbance drilling, the straight tine Sabre. Both have a straightforward build and a limited specification choice making selecting a used example as simple as the drills. There are, however, a few points to consider, so be prepared to delve a bit deeper to select the best used choice.
To advertise alongside contact the sales team:
WEAVING
6M TINE DRILL 6.0M
Year: 2006
Condition: To be refurbished (awaiting preparation)
Comment: To be renovated to as new condition.
Three-row model with 1,250 litre hopper, pto fan, hydraulic markers, following harrow and manual metering. Prepared early 6.0m drills from £14,800. Entry level private buy from £9,900 but may need work.
WEAVING
6M TINE DRILL 6.0M
Year: 2016
Condition: Refurbished
Comment: Renovated to as new condition.
WEAVING
6M TINE DRILL 6.0M
Year: 2019
Condition: Refurbished
Comment: Renovated to as new condition.
Four-row model with 1,500 litre hopper, hydraulic fan, hydraulic markers, double pre-emergence markers and Artemis Lite electric metering. Manual metering and pto fan equivalent from £21,800.
Starting point: £16,800 with one year warranty (4.0m £14,800, 4.8m £15,800)
No apologies for covering two different drill types in one article. Weaving tine drills are not complex and the differences between the Tine and Sabre drills are easily explained. Further, the company has not made year on year spec changes to these drills, meaning their evolution is easy to summarise. There are a few specification points to consider, but even these are not complex to grasp.
WEAVING MOUNTED TINE DRILLS
First introduced in 2004, the Weaving pneumatic Tine drill is offered in 3.0, 4.0, 4.8, 5.0 and 6.0m working widths with the 6.0m Tine 6M the most likely used find. All are Cat II fully mounted seed only drills, with a choice of pto or, less commonly, hydraulic driven fan with land wheel driven mechanical metering. Later 2009 drills were offered with Artemis Lite GPS electronic metering as an option. Up until 2008, Tine drills all had a three-row toolbar, 2009 models and on switching to a four-row layout. This increases the clearance between the tines and is the spec to seek if trash clearance could be a problem. All models retain the same 125mm row spacing and share the same design of coil sprung tine with Weaving seed boot. The latter drops seed some 90mm back from the reversible
Starting point: £24,800.00 with one year warranty (4.0m £20,800, 4.8m £22,800)
Four-row model with 1,500 litre hopper, hydraulic fan, hydraulic markers, double pre-emergence markers and Artemis Lite electric metering. Manual metering and pto fan equivalent from £24,800. Third party seller from £25,000 is in good order.
Starting point: £28,800.00 with one year warranty
Description
Reversible tip (inc.fastenerers)
Leg
Leg coil spring assembly
Following tine section
Rubber boot
Leg
Rubber leg mount (round)
Following tine section
Seed tube
tine tip with the claim that this ensures seed is placed over soil that has time to settle. Covering is provided by a double row following harrow.
Another key difference between the original models and subsequent 2009 models is hopper capacity, this increasing from 1,250 litres to 1,500litres. A quick spot to determine between variants is to look at the hopper cover. The smaller hopper on three-row drills
£6.00
£48.00
£88.00
£7.80
£5.72
£59.06
£170.00
£17.34
£29.07
has a green folding cover, the larger hopper of four-row drills featuring a body-coloured front hinged lid.
The hopper and metering units are produced for Weaving by Aguirre of Spain, with metering based around the Accord system but with a much higher flow rate. Suitable for all combinable seed types, application rates can be set from 2.2kg/ha and above.
GUIDE RETAIL PARTS PRICES (EX.VAT)
WEAVING TINE DRILLS
WEAVING SABRE DRILLS
WHAT’S USED
WEAVING
6M SABRE TINE DRILL 6.0M
Year: 2016
Condition: Refurbished
Comment: Three-row model with 1,700 litre hopper and Artemis Lite electric metering, full width following harrow, hydraulic fan, hydraulic markers, double pre-emergence markers. Entry level models from £25,000
Starting point: £32,800 with one year warranty
WEAVING MOUNTED SABRE DRILLS
Launched in 2010, the Sabre pneumatic drill has rubber block mounted boron steel rigid tines faced with double tungsten carbide tips. These are mounted on a three-row toolbar on the original models. Seed is dropped behind the leg via an adjustable stainless steel seed tube. The drills fold for transport, with the outer sections pivoting on 30mm pins where they both fold and pivot for lateral contour following.
Five models, the Sabre 3M, 4M, 4.8M, 5M and 6M are available with working widths of 3.0, 4.0, 4.8, 5.0 and 6.0m, with the latter the most popular and suitable for use with tractors of upwards of 180hp. All models have a double Z following harrows as standard with the straight tines fitted to Tine models as an option.
In 2019, the Sabre underwent a complete redesign, but retains the same tines. The range we consider here are the Sabre 3.0, 4.8 and 6.0m*. It is again the 6.0m variant that is the most popular. As with the Tine drills, the toolbar went from three rows to four rows for increased inter-body clearance but the toolbar is of a completely different design to the original. The outer wing sections attach via a four-point linkage that pivots in the centre of the wing. This provides enhanced contour following. The pivot pins
WEAVING
6M SABRE TINE DRILL 6.0M
Year: 2018
Condition: Refurbished
Comment: Three-row model with 1,700 litre hopper and Artemis Lite electric metering, full width following harrow, hydraulic fan, hydraulic markers, double pre-emergence markers.
Starting point: £32,800 with one year warranty
WEAVING
6M SABRE TINE DRILL 6.0M
Year: 2021
Comment: Full ISOCAN electric metering. Four rows of seeding tines, full width following harrow, hydraulic fan, hydraulic markers, double pre-emergence markers. Lightly used and ex-demo models will fetch near new money.
are increased to a meaty 60mm. Depth adjustment is hydraulic, earlier models having mechanical adjustment.
The metering units and hopper of these current Sabre drills are now made in the UK, Weaving using a range of UK suppliers for items to include hoses and wearing metal.
The company does not build to ‘just in time’ principles and will hold key components sufficient to build up to 100 drills. This supply ‘buffer’ may seem of little interest to a used buyer, but it is reflected in the company retaining large stocks of spares for existing drills.
WHAT’S USED
WEAVING TINE DRILL SPECIFICATION (FROM 2009)
Regarding the rest of the drill, 2019 models have a hopper of 2,000 litre capacity, up from 1,700 litre. The metering units on all Sabre models, regardless of age, are electronic and all fans have hydraulic drive (see Sabre development).
*NOTE: The current mounted Weaving Sabre range includes 6.4, 7.2 and 8.0m variants (See tables).
TINE OR SABRE?
A tine drill is well suited to ‘conventional’ drilling practice so will suit working into ploughed, fully cultivated and minimally cultivated lower trash land. In a wet season, Tine drills can work in conditions that will not be possible with disc type drills.
The low disturbance Sabre drill tine is more versatile, with greater adjustment than Tine drills to enable these models to be tailored to suit a wider range of soils and conditions. These drills will also work direct into stubble, with the later four-row models having greater inter tine clearance for greater trash tolerance. They are also a heavier drill, well suited to working at speed behind a powerful tractor.
WHAT TO LOOK FOR
The starting point is to choose between a Tine or Sabre drill and then work out if a three row or four row toolbar suits your needs. As a sweeping generalisation, a four-row drill will offer better trash clearance, but blockages over baled and lightly tilled ground is unlikely to cause a problem with the earlier designs. Laid crop residues and buried clumps of straw may cause stoppages, but this can apply to any tine type drill.
Current Sabre drills are heavier and more robust than their predecessors so perhaps need to be considered slightly differently. They are well-suited to a powerful tractor up front. The best course of action is to seek advice.
A basic Tine model, with pto fan and mechanical drive, can make a great back-up drill. Providing it is protected from rodent damage, these drills have the potential to sit in store waiting until their wet weather abilities make this type of drill the one that will get seed in the ground when other systems let you down.
Launched in 2004, a key Weaving tine drill development was the move from the original three-row toolbar to the still current four-row design for the 2009 model year. The hopper capacity of the drill changed from 1,250 litres to 1,500 litres at the same time, these two points essentially covering development. Other details as per the picture captions.
All Tine models are fitted with a pto driven fan as standard to suit those running a tractor with low hydraulic flow. Hydraulic fan drive and Artemis Lite GPS electronic metering was offered as an option from 2009. On a used buy, the latter will add around £5,500 to the price.
Among the options offered on Tine and Sabre drills are electric half section shut off with automatic tramlining fitted as standard. When looking over a used buy, take time inspecting the inside of the hopper. Rodent damage may be a problem, some drills being stored for extended periods with little in the way of care between bouts of use.
TINE DRILLS.
DETAIL DEVELOPMENT BUT SIMPLICITY RETAINED
A quick way to spot an original Tine drill and later 2009 and on model is to look at the hopper. The original has a soft green cover and holds 1,250 litres, the later and still current design having sloped side-folding lids and a capacity of 1,500 litres.
Tine drills switched from a three row (left) to four row toolbar for 2009, but the coulters are the same with reversible point, coil springs and Weaving seed boot.
Original Sabre drills are fitted with electronic metering as standard, with the same system listing as an option on 2009 and on Tine models. Note calibration chute.
Straight following harrows are fitted to Tine drills, a catch wire through the coils being fitted from about 2009. The harrows on the drills can be adjusted for both pressure and angle.
Weaving Front Tanks can be adapted to work with all drills. Offered in 2,000 litre and 2,400 litre capacities, the tanks weigh in at 910kg and 950kg empty and can be used in place of a rear hopper and metering system.
Automatic tramlining is standard on Tine drill models, a top link triggered finger switch simply setting as the drill is raised and lowered back into work. Note hydraulic fan drive, an increasingly popular choice on more recent tine drills.
The drill serial number plates are on the headstock of Tine and earlier Sabre models and front frame of current Sabre drills (right).
Mechanical metering on Tine models is easy to set up, the land driven metering wheel having a bar bolted into the wheel rim to make it easier to turn the correct number of times when calibrating the drill . The roller behind the wheel stops the wheel rotating as the drill is raised, stopping the flow of seed to the coulters.
WHAT’S USED
The Sabre tine is the same on all Weaving Sabre drills, but otherwise the current models are a complete redesign. Key developments are listed in the pictures and captions.
Original open seed tube design (left) superseded by single hole outlet to offer improved depth control. The latter are a direct retrofit to existing drills. The seed tube height adjustment is also changed to a simple pin lock release to allow the seed tube to be raised or lowered. The earlier type adjusts by undoing two bolts.
The relocated depth wheel (arrowed) on current Sabre drills sees it moved to a position in line with the centre of the seed hopper. The current hopper has 300 litres of added capacity at 2,000 litres/2 tonnes.
SAME TINES, SAME NAME BUT LOTS OF SABRE DIFFERENCE
On the latest Sabre models, coloured aluminium spacers enable the tines working depth to be quickly set to drill cereals, rape, beans etc. Drilling depth on the original Sabre drills is set on the depth wheels and via a pair of turnbuckles on the toolbar frame (arrowed).
The high-capacity metering unit allows the same system to be employed across a range of models and the ability to deliver high volumes of seed at operating speeds of up to 14km/hr
New toolbar (right) features a four-point mount that provides 6° of wing pivot and lateral movement for improved contour following. The duty strength of the whole drill is increased to cope with higher powered tractors. The pivots pins are upped to 60mm diameter, the wing pivots of the original Sabre drill (left) hinging upon 30mm pivots. Although not as robust as the newer design, fatigue problems with any Sabre drill are rare, with pivot wear cured by re-bushing.
Improved access to the calibration chute and hopper emptying flaps should make setting up and swapping between seeds easier on the current Sabre drill, but it is hardly a chore on the existing models.
The move to a new design of high capacity 152mm hydraulic fan was done to improve air flow and to reduce noise levels. Note also anti-slip access step.
Depth control wheels on the original Sabre drill have pin hole settings with lots of adjustment. Although not as easy to adjust as the hydraulic system on current models, this simple system works well and enables the drill to be fine-tuned to suit different soils and conditions.
Triangular shock rubbers on original Sabre drills(left) replaced with round profile types (right). An early Sabre drill refurbished by Weaving will have the later type and these will be supplied when ordering replacements.
Original hopper and metering unit of Sabre drills made by Aguirre, with electronic metering and a hydraulic fan as standard. The two hopper lids open to the sides, unlike the single lid of Tine models that hinges to the front. Capacity is 1,750 litres. LED lights are standard on all Sabre models.
RDS GPS forward speed sensor for the seed rate control.
WHAT’S USED
WEAVING SABRE MOUNTED DRILLS (2019 AND ON)
*Marker arm option £2,300
Weaving sells its used drills with a year’s warranty and on farm set up. All used drills are fully prepared with new wearing parts and will have any necessary repairs carried out prior to sale. Drills sold through a third party will need a check before buying. The simplicity of these drills makes this a relatively easy task but ensure the drill can be opened out so you can look for damage and general wear.
It is not unusual for these drills to be worked fast and hard behind a tractor of higher power than necessary. The factory will know the history of most drills sold in the UK, so a call with the drill’s serial number should enable you to glean a bit more about its past. This may be useful if considering a private and auction buy.
Be careful with prices. These can become inflated for a drill offered for sale ahead of what looks likely to be a difficult autumn. As a guide, compare the prices to a drill fully prepared by Weaving. The company, at the time of writing, offered an entry level 2004
WHAT TO PAY AND WERE TO BUY
6.0m Tine drill at around £14,800. A 2018 example, again with the same spec, retailed for £24,800. A new 2022 model is priced upwards of £35,800. These prices are for drills sold and backed up by the manufacturer.
An early 2004 drill in need of new wearing parts and presented in less than great order should be offered for sale at half the prices above, 2018 drills tending to have residuals that are unlikely to be much below £22,000 from a third party. At a wet autumn auction, Tine drills often sell for more than the same spec drill direct from Weaving.
Sabre drills have an even fiercer grip on residuals, a ‘standard’ spec 2012 6.0m model, prepared for retail sale, commanding £26,800 or pretty much what it cost when new. The last of the three-row 2018 variants sell for £32,800, but this will be for a drill that is in tip-top order. This compares to a current new model at £53,800. The same basic buying rules apply to Sabre and Tine drills. You can
overpay if you leave your buying decisions too late in the year and more so if it is wet.
As is the case with other UK made drills, a safe bet is to try and source a used drill direct from the manufacturer. In the case of a Weaving drill, a used buy will be installed on farm. As with so many items of ‘simple’ kit, attention to set-up is a key to getting the best from the drill.
That said, Tine drills are not difficult to set up, with a few tips on depth settings and checking calibration typically ensuring the drill performs as expected. Sabre drills are more ‘adjustable’, a bit of tweaking, such as adjusting the angle of the legs, having more of an impact upon how well the unit performs and it pulls through the soil. A well set-up drill will reduce the amount of fuel you burn. As a guide, Weaving suggests a 6.0m tine drill, Tine or Sabre, has the potential to sow around 6.0ha an hour on about 17 litres of fuel.
A ‘first’ generation Sabre drill is a more versatile alternative to the Tine models. Standard electronic metering may make it easier to integrate one of these drills into an existing system that includes varied seed rates etc. As always, you need to think just as hard when considering a used buy as when looking at new kit.
SUMMARY
A tine drill is seen by some as just a tool to do the job when other systems fail. Others see a tine drill as delivering the most cost-effective drilling, with low operating costs and ease of operation outweighing any perceived disadvantages. Regardless, choosing a used Weaving Tine or Sabre drill is as straightforward as the drills when it comes to looking one over as a used buy. Just don’t expect one to be available a week or so before you decide you need one.
Original RDS MFDC control is a simple box for manual metering seed drills.
WHAT’S USED
SIMPLE CONTROLS
Weaving drills use RDS electronics and control boxes, tine drills coming with an entry-level Multi-Function Drill Control, with the latest Sabre models offered with a more advanced iSOCAN control box as an option or, if preferred, a direct Isobus cable connection to the tractor.
When considering a used drill, it is worth seeing if the supplied control box works, poor storage and damage possibly leading to problems when you come to use the drill. Full parts support for all systems is readily available.
Sabre drills from 2010 are supplied with RDS Artemis lite controller for seed rated control. This box gives the machine electric metering with GPS forward seed sensor.
Top spec RDS iSOCAN controls, offered with Sabre drills, can be used to also operate a Stocks fertiliser, slug pellet or rape seed applicator plus an Avadex applicator. The metering of the drill can be linked to Isobus and unlock code for variable rate seeding.
SALES SCENE
If you have a story, or an event, please do get in touch: peterlove@madasafish.com, TEL: 01323 833125 Peter Love, the joint creator of Tractor & Machinery and Classic Tractor, gives Farm Machinery his views on
September is here and we have farm and tractor sales, modern and old, right through the autumn featuring all manner of things in them. I bring you just some of what’s going to happen.
As I keep on saying it pays to invest in classic and vintage tractors and that was certainly the case when four classic MFs went on to make £181,300 + VAT and buyers premium on top of that, at the Cheffins
Vintage Collective at Sutton on 19-20 July.
ROBERT FOSTER DISPERSAL SALE
On 11-18 September Clarke & Simpson have the online sale at Badingham, Suffolk of the well known Robert Foster who was the biggest thatching straw grower possibly in England until his passing.
The sale will include his immaculate threshing drum and Ruston and Hornsby trusser and other thatching equipment. All his equipment was kept inside and includes his stunning classic International 953 combine. The Field Marshall Series 1 which he used regularly at shows features hydraulics and Adrolic linkage. The sale
International 953 combine is ready for another harvest
will include six tractors, forklift mostly from the International Harvester Co family. Viewing will be 13-14 September and further details from Clarke & Simpson, tel: 01728 746 323 - 07773 359134.
International 885 two-wheel drive has been well serviced
TONY MCGOVERN COLLECTION
On Saturday 21 September Jonathan Earp of Commercial Vehicle Auctions, Doncaster is to stage the late Tony McGovern Collection Sale at 9.30am near Slough, Buckinghamshire.
Tony supported all the major shows with his stunning tractor and lorry collection, which won the family many awards over the years. He was a regular at Tractor World and other Kelsey Media shows over the years which he supported so well.
The sale features eight Fergusons mostly restored to a high standard and
is made up of four TE-Ds, three TE-Fs and one TET. The Massey Fergusons are made up of one stunning 35X and two 35s all restored. A 65 Mk2, 135 and a well restored 565 two-wheel drive with 4,010 hours on the clock. There are six Ford and Fordsons with a lovely Super Major and Super NP Dexta the same as is the 4600, 7610 SII and 5610 SII, all two-wheel drive. The odd ones out, is a brilliantly restored 1972 David Brown 996 and a Case VAC. As for the classic lorries to be sold they are just unbelievable as well and include AEC, Ford, Guy, Scania, Man, DAF, Foden and
Magirus-Deutz for starters. This is a sale not to be missed. Further details of location www.cva-auctions.co.uk or tel: 07745 716007.
Tony with the fleet of restored Fergusons
FARM DISPERSAL SALE IS ON SALES
It’s all happening just down the road from Ockenden Farm, Chiddingstone, Kent when Brode Ross Thompson sells most of the contents from his farm and forestry operation as he and his lady move to Powys, Wales. H J Pugh has got the job of the dispersal sale which is to take place on Wednesday 18 September. Extra sale entries are very welcome, please speak with Henry Biss, tel: 07935 587155, it's online and live with Howard Pugh conducting it himself.
Timber extraction has been Brode’s ‘bread and butter’ and has done much of it in his farming career and sold tons of pulp wood to papermaker Bowaters at Sittingbourne for decades. Looking around at the tractor equipment here, it’s not new by any means, mostly in the classic era, but it has all been well maintained and all goes well and starts on the button as I witnessed upon my visit. The vendor has lots of ‘this and that’ including excellent band saws, wood chipper and more. The main items that I came across were: 1988 Bedford TM AWD 4 x 4 B760FJS with timber deck running on red diesel, fitted with Bedford 500 6-cylinder diesel engine, 78,906 miles with fully working Hiab 090 5 ton crane no log book runs and drives well. Ford Force
Brode with the Komatsu that’s in the sale on 18 September
The amazing Brode Ross Thompson with his reliable Ford 4000
4000 Lambourn cab suppied by Testers of Edenbridge with BiTake Radaud log splitter on back (to be sold separately). No log book runs well and hydraulics fully working 5,040 hours with rear wheel weights. 1989 Ford 8210 Series III DP 4x4 G356NKK Super Q cab 7214 hours runs very well with Hakki Pilke 1X37 timber machine behind (to be sold separately).
Also here is a Fordson Diesel Major (possibly 1956) with loader, engine very good and rebuilt by well known mechanic Tony Davies, runs superbly and the loader all works with new hoses. 1968 Ford 5000 RPM78G with Boughton HDF 25 winch with anchor (huge!) with Sekura cab frame, engine rebuilt by Tony Davies. Runs and sounds well, very clean, tyres good. The mighty Rotney flexi-forestry foreloader/carrier is in full working order with Ford 7600 engine, rebuilt by Mike Osborne, runs well with hydraulic crane and FMC grab.
I also spotted a Komatsu PC27 digger with various timber attachments. Also to be included is a fully working long wheel base Land Rover Defender, a good Thwaites dumper and another digger plus cherry picker, large generator and so much more. These are just some of the items I came across when carrying out the preview.
Rotney flexi-forestry foreloader/carrier is in ‘mint’ condition and is a classic in itself
The Ford 8210 III is better than it looks
Bedford TM four-wheel drive runs well as it looks with hydraulic loader
The Ford 5000 has a huge winch on the back and mechanically in very good order
4 September
East Devon Collective Machinery Sale. Off A30, Newcott Farm, Yarcombe EX14 9ND. Greenslade Taylor Hunt, tel: 01278 410250.
Online Sale of Tractors, Machinery, Plant & Commercial Vehicles.
Carlisle. Harrison & Hetherington, www.harrisonandhetherington.co.uk
Dispersal Sale. Boundales Farm, Leavening, Malton. Frank Hill & Son, tel: 01964 630531.
Collective Sale of Machinery, Implements & Farmyard Sundries. North Heale, EX18 7PH. Andrew Lane, tel: 01837 810845.
17 September
Onsite Dispersal Sale of Tractors, Grassland Machinery, Livestock Equipment etc. West Dorset. Symonds & Sampson, tel: 01935 382909.
18 September
Onsite Auction of 3no. Claas Lexion 8800 TT Combine Harvesters, 9no. John Deere & New Holland Tractors, Implements & Machinery. Winchester, Hants. Cheffins, tel: 01353 77767.
19 September
Online Timed Machinery Sale to Incorporate Rural & Domestic Bygones. Clitheroe Auction Mart, www.auctionmart.co.uk
COLLECTION AT VDI
I recently visited VDI Auctions in Dourne, Holland and was made welcome by its MD Leon. Their next online sale is 16-23 September with viewing on Saturday 23 September.
This auction is made up of 195 lots and features a superb collection of well together and in most cases original MB-tacs the number one ‘hot’ make all through Western Europe at the moment. The range starts from: 700, 800, 900, 1000, 1500 and 1600. However there is as always a good line of Lanz which features a restored WW2 gas producer example. Also spotted is a fine older restored SEDIAM Field Marshall Series 3A that’s all part of the sale along with a work in progress Series 2. A good number of Scandinavian makes are offered in this sale
VDI MD Leon with the line-up of MB-trac’s that come up in September
along with a rare Fendt vineyard tractor that has been superbly restored to concours standard and was supplied to France new. Bidding is very straight forward with VDI which welcomes UK customers and can arrange transport if needed.
MARSHALL 100 MAKES RECORD MONEY BUMPER MB-TRAC
The Cheffins Peter Gaskins, Chepstow on-line only sale was concluded on 26 July at 2pm and despite the ‘hot’ tractor a 1988 Marshall 100 4WD suffering from a major electrical problem, which entailed eating batteries it made record money at £41,500. E604KOT had 4,786 hours on the clock and the original style tractor had been supplied new by Robin Sharp, Aylesford, Hampshire where well known Marshall ‘guru’ David Aylward worked for as a salesman at one time.
The amazing Fowler Gyrotiller 80 and 4/40 sold for £49,500 together on the day
The previous price for a tractor in this condition was £18,000!
Others to do well were the superbly restored 1958 MP6 no.6740088 that was supplied to SEDIAM, France sold for just £46,500 (down £10,000) and the 1935 18/30 also well restored by David White £41,000. The very rare 1988 Marshall 752 two-wheel drive original £17,000, and perhaps this one has more in the tank.
As for the 1934 Fowler Gyrotiller 80 ex Bomford & Evershed with GM 6-cylinder 2-stroke diesel sold for £21,000 in restored condition, but needing work particularly to
Peter with the very rare Marshall 752 one of five made that sold for £17,000
the clutch and transmission. The amazing 1937 Fowler Gyrotiller 4/40 which runs and works so well, but needing new batteries sold for £28,500, both originally restored by John Clark, Winchester and were seen together at the 1988 Great Dorset Steam Fair. The bargain of the sale was the ex Australian 1949 Turner Yeoman of England MK11 no. 591249 a brilliantly restored tractor with all the extras at £8,000.
Peter Gaskins (87) saw his collection dispersed on Wednesday 26 July for a record £41,500 with electrical problems
HUGE RECORDS AT CHEFFINS SUMMER COLLECTIVE
At the Cheffins Vintage Collective on 19-20 July huge records were set for the 184 tractors that came under the hammer particularly the Massey Ferguson classic stock and other classics crept in as well. Clearly investors are back in the tractor game again and a number of original style classics are gradually becoming out of bounds for the everyman, which is unfortunate to see, but there are still plenty to go for. In fact at this sale Cheffins actually got away a number of tractors that have been hanging around the Cambridge Machinery Sales site for in some cases eight months.
It all started with the 1994 Fiat F140 fourwheel drive in mat Fiat terracotta colours, where it was sold for an amazingly £25,000 + VAT and that set the tone for the day ahead in the fine sunshine.
Things just ‘hotted’ up like no other when the 1996 Massey Ferguson 342 two-wheel drive came on, with LoProfile cab another mint tractor, grade 12 sold after the hammer had come down for a remarkable £35,000 + VAT, yet another record. It was then followed by a
Some £35,000 was paid for the MF 342 a massive record price
Yes you did read this correctly Patrick Edwards is to retire and that means the vintage parts business, run by Derek so well over the years and at shows, goes as well, when the curtain finally comes down. Cheffins have been called in to sell the major stock on 14 September at Langley Farm, Langley Lane, Clanfield, Oxfordshire, OX18 2RZ it’s certainly going to be some sale. It will include just about everything from
MF 690 two-wheel drive with cracked front tyres in grade 3, but the paintwork was so, so in places which raised a record £26,800 + VAT. It didn’t stop there as the MF 675 four-wheel drive with only 971 hours went on to make a staggering £51,500 + VAT. After that we came to the ultimate here on the day in the Massey Ferguson 390T four-wheel drive with just 180 hours, which kept on going up and up and up! When it all stopped someone had paid £68,000 + VAT. All these tractors have gone to UK buyers and the last three mentioned had come from the well known Dessie Heery of Trade Tractors, County Cavan, Republic of Ireland who was in shock on how much they had made, but the key was presentation, low hours and originality.
Another extra lot was a Ford 5000 original, but we have seen far better, yet it was got away at a good £11,000. One of the nicest tractors here was next with the 1974 Roadless 118 with Fritzmeier cab looking the restored bees knees, RPT207M what a stunner it was, but for some reason Roadless are undervalued compared to County and sold here for a good £23,000. Also sold was the 1990 Mercedes MB-trac 1000 that
The Lanz Bulldog is number one in mainland Europe and the 948 45hp Traffic sold for £25,500
carried a HE Taylor dealer sticker again a clean machine original style machine sold for £36,000 without VAT and so the sale carried.
Keeping with the MF theme was the William Fuller of Four-Wheel Traction Ltd fame MF 165 WYM30H with MultiPower which he used on his East Sussex experimenting with developments on his system, which was sold all across the world. The original four-wheel drive style machine went on to sell for £15,000.
Just a few lots on a number of Ian Bell’s collection from Crawley came up, with the made up 1948 Lanz Bulldog 8506 45hp Traffic which unfortunately the serial plate is missing in grade 4 condition sold for £25,500. The gem of an original and genuine Fordson E27N Roadless DG4 half-track with P6 engine from the same collection sold for a good £14,200 and others in his collection did well also.
In all the selling rate was 87% a huge record. This was by far the best Cheffins mid-term Collective ever and bodes well for the finale here of these trio of sales which takes place on 19-20 October.
Three of the record breaking MFs that raised £146,300 between them
PATRICK EDWARDS FINALE SALE
modern to old machinery, horticultural, main line agricultural, plant, trailers, lorries, vans, parts by the bucket load and all. Patrick said it’s time to slow down and enjoy life! However he emphasises the autojumbles and shows will carry on at his fields with the next on 5 October.
is just some of the stock that comes up on the 14 September
WHAT’S NEW
VICON ROUND BALERS GAIN MORE AUTOMATION AND EXTRA TECHNOLOGY
Vicon round balers have been given a host of upgrades for the 2024 season, including Tractor Implement Management (TIM), moisture sensing and the ability to tie the bale using film, in place of net wrap.
TIM is now available on the fixed chamber FixBale 500 model and the RV5200 Plusseries variable chamber balers, as an ISOBUS solution that enables the implement to control certain tractor functions, when used with any TIM-ready tractor.
Through Isobus connectivity, TIM enables the baler to automatically carry out repetitive processes and manage several key tractor functions to improve operational efficiency. These include a pre-programmed rate of tractor deceleration to pause baling and apply net, along with opening and closing the baler’s tailgate after the bale has
been tied. A built-in inclinometer prevents unsafe bale ejection on steeper gradients.
From a further safety standpoint, the TIM process simply needs acknowledgement from the operator, to resume the baling process. This uses a pre-programmed rate of acceleration to automatically reach the desired forward speed for the volume of crop being baled.
By automating many of the repetitive tasks associated with round baling, the combination of TIM technology is able to reduce operator fatigue, while contributing to an overall efficiency gain.
Film binding is now an option for the FixBale 500 model, thanks to a range of modifications applied to the PowerBind net injection mechanism. These include a revised braking system and additional rollers to allow for the different characteristics of film,
compared to net.
Hydraulically operated film groupers gather the material into a tail, to assist with the start and finish of the film binding cycle. Capable of handling a wide range of pre-stretch ratios and roll widths of up to 1,300mm, this brings further operational flexibility to baling.
In addition, the RV5200 Plus-series balers can be equipped with a Techno-Pack, which adds crop humidity measurement to the range.
A sensor plate mounted in the lower part of the main bale chamber is equipped with a pair of electrodes which pass an electric current through the incoming crop. This data is used to calculate the percentage of moisture in the bale, displaying the moisture content in real time, and is able to detect moisture levels up to around 50%.
Hultsteins, UK/Sweden producers of sustainable refrigeration and electric generator systems, have joined forces with a leading vehicle battery pack manufacturer Addvolt to provide sales and support services in the UK and Ireland.
Addvolt designs, develops and manufactures a wide range of Powerpacks and Power Units (ePTO). These solutions provide fridge operators with clean energy, making every vehicle smarter and more sustainable by reducing diesel consumption, CO2 and particulate emissions, noise levels and maintenance costs.
KUBOTA PARTNERS WITH UV BOOSTING TO DRIVE SUSTAINABLE AGRICULTURE A COOL GREEN ENERGY SOLUTION
By combining an Addvolt powerpack with a Hultsteins’ onboard power generator, Ecogen2, cold chain transporters can benefit from 100% electrically-powered refrigeration for urban and long-distance deliveries. This combination, said Hultsteins not only eliminates the fuel costs and pollution associated with diesel-powered refrigeration but also ensures quiet, low maintenance and ULEZ-compatible deliveries.
Fitted to the pto of the tractor unit, Ecogen2 converts any make of diesel fridge into full-electric operation at a fraction of the cost of buying a new electric fridge.
Addvolt’s PIEK-compliant plug-in hybrid powerpack can be conveniently charged at any warehouse (plug-in) and with the addition of a generator, offers hybrid recharging capabilities while the vehicle is in motion, enhancing efficiency.
Kubota Corporation and French start-up technology firm UV Boosting have announced a partnership to jointly promote innovation with sustainable solutions for the viticulture industry.
UV Boosting has developed a patented solution for stimulating a plant’s natural defences, through the use of UV-C light flashes. This allows growers to reduce their reliance on fungicides and minimise damage caused by pathogens and other abiotic stresses such as spring frost or drought. UV Boosting’s UV-C light flash technology is crop agnostic and the existing implement portfolio can be easily extended into other crops.
Kubota plans to tackle global challenges, such as environmental regulations, climate impacts, and labour shortages, by expanding community-focused operations and offering integrated solutions and technological advancements for customers.
Daria Batukhtina, strategic business development manager at Kubota Innovation Center Europe, said: “Increasing regulatory restrictions and environmental concerns are enabling a need for alternatives to minimise chemical inputs in speciality crops. This pilot programme with several growers and dealers is a part of Kubota’s strategy
to create an eco-system which allows innovation to evolve, through partnerships with external businesses such as AgTech start-ups, agricultural producers, research institutes and universities.”
The pilot program is taking place in Brescia, Italy, and Anjou, France. The participating dealers will manage and support UV Boosting’s technology, and collate customer feedback. The distribution network already recognises an increasing demand for new environmentally friendly solutions that enables plants to self-protect, through UV light stimulation.
Herve Gerard-Biard, vice president of business development, Kubota Holding Europe BV said: “With this partnership, Kubota is extending its scope into alternative crop protection solutions and accelerating its innovation strategy with the objective of creating new business opportunities.”
According to experts – backed by scientific evidence – UV light solutions secure the yield for organic, biodynamic or conventional wine growers. Growers will apply four to seven treatments during the season to evaluate the technology impact on yield results, in addition to the overall effectiveness on tree health.
Graham Usher and Addvolt’s UK Sales Manager Sean Griffiths
TO DUAL, OR NOT TO DUAL THAT IS THE QUESTION
4m trailed drill. Axle = 6,000kg (Single fitment)
Tyres to field % contact 4m Drill
Un-trafficked Trafficked
Assumptions: 10ha field – full yield potential i.e., un-trafficked = 10 tonne per ha Yield loss in wheelings @9psi = 10% Un-trafficked
BRIDGESTONE’S STEPHEN LAMB CONTEMPLATES THE QUESTION, IF IT’S BETTER TO DUAL OR NOT TO, ESPECIALLY IF WE WISH TO REDUCE SOIL COMPACTION AND INCREASE YIELDS WITH OUR DRILLING OPERATION.
It is an interesting question, and one that would have not necessarily been asked before the advent of IF and VF technologies came along. But it should now be and it is well worth doing the exercise to establish the answer.
To be clear here, we are only talking about the use of duals to enable you to drill lightly over the land, where compaction and yield are the key focus and not for any stability or consolidation requirements.
So, let’s start with your current dual drilling set-up and look at the following areas:
• Operating pressure
• Total tyre width
• Load applied
• Working width of the implement to gain ‘tyre to field percentage contact’
Once we have these benchmarks, we can look at other potential solution improvements to the reduction in compaction and an increase in yields from the current dual fitment set-up to that of a single fitment set-up, potentially.
As an example of this, please see the table, where the current set-up has four of 650/65 R42 with a 4m trailed drill and an axle load of 6,000kg (single fitment –transport/raised).
If we were to offer, say, two of VF650/65 R42 as one alternative, could two tyres be better than four?
An illustration only 3.25T yield diff
• Operating pressures: With the load of
DUALS – 650/65 R42 VS SINGLE – VF650/65 R42
Stephen Lamb
the axle being 6,000kg – All tyres (load) would operate at the manufacturer's lowest permissible limit of 9psi.
• Total tyre width in inches:
Duals (4x25.5) = 102”
Singles (2x25.5) = 51”
• Load applied to the soil:
Duals 102 x 9 = 918 lbs/inch of forward travel.
Singles 51 x 9 = 459 lbs/inch of forward travel.
So, with both set-ups operating at the lowest pressure setting possible, the singles win here. However, if there was a greater pressure differential between the two setups and/or the duals had smaller widths of tyres, then duals could well be more beneficial.
• Working width of implement: 4m
• Tyre to field percentage contact: Duals = 65% Singles = 32.5%
So here the duals have a much greater contact with the field, and therefore a greater area of topsoil compaction will be
developed than the singles, as both operate at the same pressure.
LOOKING AT YIELD LOSS
Independent studies have shown that by having an operating pressure of some 9psi, a yield reduction of some 10% could be encountered within the wheelings. So, if we were to take a field size of say 10ha with a yield potential in (un-trafficked area) of 10t/ ha the following would be the yield result –
• Duals
(35% Un-Trafficked - 65% Trafficked)
3.5ha x 10t = 35t + 6.5ha x 9t = 58.5t
Total yield = 93.5t
• Singles
(67.5% Un-trafficked - 32.5% Trafficked)
6.75ha x 10t = 67.5t + 3.25ha x 9t = 29.25t
Total yield = 96.75t
So due to the singles having a lower field contact percentage the reduction in yields from the wheelings is lower, and therefore offers a 3.25t yield improvement.
In this one example, where singles benefit from less load applied to the soil, due to less contact with the soil. Therefore, less reduction of yield loss via the wheelings, along with the additional benefits of not having to fit and remove, nor requiring any road transport width considerations as with duals.
While this is one exercise where singles do benefit, you would need to conduct your own individual exercise to see if an alternative tyre solution specification and/or size could help or hinder your current dual set-up.
Indeed, where you have a significant differential of operating pressures and/or the total tyre width between duals and singles, then one could well outperform the other when compaction and yields are your priority.
It’s about getting the balance right between those elements. So, it is a worthwhile exercise to conduct in order to maximise the performance of your current set-ups.
WHAT’S NEW
CLAAS EXPANDS PRODUCT RANGE FOR BALER-WRAPPER COMBINATIONS
The Rollant Uniwrap has been delighting farmers around the world for decades thanks to its reliability and durability. Claas presents the new Rollant 630 RC Uniwrap, marking a further development of the proven series to supplement the current product range. The main focus of development was more power, more operator comfort and lower processing costs combined with an even more rugged design for drive components subject to heavy wear.
The Rollant from Claas has been one of the most popular fixed-chamber round balers on the market for decades, thanks to its simplicity and ruggedness. The Rollant Uniwrap baler-wrapper combination is renowned for its solid, wellformed bales and short processing times. Now the Claas design engineers have made a good, tried and tested product even better: even further reduced wear, even more optimised drives, even better
wrapper and even more operator comfort – united in one machine that combines good ground clearance with a low centre of gravity for transfer. Furthermore, the Rollant 630 RC Uniwrap is the first Uniwrap to feature the pioneering Y-shaped design introduced in the Lexion in 2019 that is the hallmark of the Claas product family.
NEW PICK-UP AND HYDRAULIC KNIFE GROUP ACTIVATION
The latest generation pick-up, the Claas Multiflow with 2.10m working width (1.90m DIN raking width), is designed to further reduce crop losses and ensure more uniform material crop flow. The standard pick-up is equipped with five cam-controlled tine bars. The new cam track reduces the power requirement by 20%. Removable strips made from special plastic guarantee rapid and easy access for maintenance work.
The pick-up transfers the crop to the
heavy-duty Roto Cut cutting rotor with 8mm double tines made from doublehardened boron steel arranged in a helical formation. Four rows of tines feed the crop at up to 13,800 cuts per minute optionally through the 25-knife cutter bar with a 44mm cut length. The knife groups (25/13/12/0) can be activated electrohydraulically from the comfort of the cab. All knives are individually secured and can be hydraulically engaged or retracted centrally.
The Pro cutting floor can be lowered by up to 30mm to adjust the crop flow and prevent blockages in uneven swaths. An optical and acoustic early warning system additionally enables the driver to operate as close to maximum baler capacity and to reduce the ground speed when the forage volume increases significantly. Should a blockage occur, the cutting floor can be lowered hydraulically by pressing a button on the control terminal.
SOLID DRIVE, CHASSIS AND TAILGATE SUSPENSION
The drive chains have been substantially reinforced in the areas subject to the greatest wear. The chain links there are both longer and stronger. Together with larger gears, this reduces wear on the chains. Guides on either side of the chain-tensioning wheels also reduce wear by preventing the chain from slipping or shifting. The lubrication system supplies each individual chain with exactly the amount of oil needed, no oil is wasted. This protects the environment and guarantees efficient operation – for up to 14 hours, without having to be refilled.
To give the chassis more stability, technology from the Quadrant square balers has been used in areas subject to the greatest wear. The thickness of the steel profiles has been increased by 20% to provide the ruggedness and durability to withstand extreme conditions such as a those associated with very wet crops.
FOR HEAVYWEIGHT BALES AND HIGH CORE COMPACTION
The 1.25m x 1.20m bale chamber works with 16 next-generation steel rollers with ribbed profile. The thickness of the drive shafts has been increased to 55mm in areas subject to heavy wear. This enables higher bale densities and weights to be reliably absorbed with sufficient reserves, without compromising durability.
To give the chassis more stability in extreme harvesting conditions and satisfy demands for ever increasing bale weights, the frame has been redesigned, especially in the area of the tipping cradle.
The tipping cradle is not only more stable, but features new end-stop dampening to ensure rapid yet smooth operation which protects the machine. The bale diameter can be adjusted from 1.25m to 1.35m.
The new Rollant 630 RC Uniwrap can be optionally supplied with the Maximum Pressure System Plus, or MPS Plus for
WHAT’S NEW
short. The pivoting three-roller segment in the tailgate delivers extra pressure, guaranteeing rock-hard bales with high core compaction that even extends to the outer shell.
WRAPPING IN RECORD TIME
With the Rollant 630 RC Uniwrap, you can choose to wrap your bales with net or film for maximum versatility. Film provides an optimum seal for silage bales and simplifies disposal as there is no need to separate twine and net wrapping.
One feature adopted from the Uniwrap 400 is the impressive wrapping table, which further reduces film consumption thanks to a new hydraulic brake. With only 12 seconds from opening to closing the tailgate, the speed of bale transfer from the bale chamber to the wrapping table is unmatched.
Compartments containing up to 12 replacement rolls of film wrapping are housed beneath the large maintenance flaps.
NEW MODELS AND RIDER-INSPIRED UPGRADES
Complementing its earlier launches of the full-size Ranger, Sportsman 570 2-up and RZR Pro lineups, Polaris Off Road has also unveiled its 2025 upgrades to the off-road industry’s most expansive lineup, including an impressive range of new colours and quality upgrades introduced across its Sportsman and RZR models.
Highlights to the Sportsman 570 model range –the new Premium LE model in Matte
Highlights include the latest trim added to the Sportsman 570 model range –the new Premium LE model in Matte Copperhead, joined by new colours across the 1-up platform, as well as the new RZR Trail S Ultimate in Sand Dune to give customers an upgrade in style and ride features.
POLARIS SPORTSMAN
Polaris Sportsman, the long-standing automatic 4x4 ATV, builds on rider-inspired innovations and includes smooth, strong and versatile features across the 2025 ATV lineup. Along with the 2025 Sportsman 570 2-Up lineup released earlier this year, Polaris upgrades the bestselling Sportsman 570 1-up ATV lineup to match and has expanded the lineup with an all-new Sportsman 570 EPS Premium LE in Matte Copperhead, the Sportsman 570 EPS in Stealth Grey with new Lime Accents, and new Heavy Metal Gloss colourway with orange accents for the Sportsman 570 SP.
regardless of the terrain type. Giving riders the confidence to go further and do more, the Sportsman 570 features sealed MacPherson Strut suspension on the front with 20.8cm of travel, alongside Dual A-Arm independent rear suspension with 24.1cm of travel. SP models feature sealed highclearance arched Dual A-Arm suspension on the front.
POLARIS RZR
trail ride yet. Building on the features of the Sport spec, the Ultimate trim also offers Ride Command compatibility and Rockford Fosgate® cab audio system to elevate any trail ride, as well as a poly roof fitted as standard, and Walker Evans® Needle Shocks offering 31.1cm front and 33.5cm rear suspension travel.
The 2025 Sportsman 570 1-up platform includes new integrated LED work light with built-in battery charging port, quality upgrades including new wheel-well debris shield and new seats with premium Polaris branding. True On-Demand all-wheel drive, in-line shifting, and single-lever braking allow for simple and effective user control, whilst the engine braking system (EBS) on applicable models delivers a smooth and controlled riding experience
Polaris RZR continues to make a bold statement on the trails with fresh new colours and graphics across its trail and XP lineup.
The 2025 RZR Trail S is now available in Sand Dune on the Ultimate trim, complete with red graphics, springs and colourmatched painted roll cage. At just 60-inches (152.4cm) wide, with powerful LED lights, power steering and 27-inch tyres, the RZR Trail S is optimised for next-level performance, offering riders’ their best
Also new for 2025 is the new Storm Grey colourway for the RZR XP Sport, featuring contrast Lifted Lime RZR graphics, front bumper and springs, plus a colour-matched Lifted Lime roll cage on the two seat model. The RZR XP’s ProStar 1000 Gen 2 engine provides the ultimate in trail agility and responsive acceleration, complemented by stay-out-all-day features like bright LED headlights, full doors, illuminated interior controls and Walker Evans® Velocity shocks for unmatched comfort. The 2025 RZR XP is fitted with 14-inch black alloy wheels and comes fitted with a front bumper as standard.
NEW GRAIN PEDESTAL FAN HELPS OPTIMISE GRAIN STORAGE CONDITIONS
With the fortitude of the UK’s food supply chain being challenged by climate change and the war in Ukraine, Hydor is launching the Grain Pedestal Fan to minimise the risk of grain spoilage or mould growth, reducing waste caused by suboptimal storage conditions.
Grain pedestal fans are essential tools in the storage and preservation of harvested grain, helping maintain the quality and safety of the grain by regulating temperature and moisture levels.
The new Grain Pedestal Fan from Hydor, a leading manufacturer of agricultural ventilation equipment, maintains uniform temperatures throughout the grain mass. It is estimated that around 30% of food waste in the UK occurs before the produce leaves the farm. Improved storage can help combat this issue by extending grain’s storage life while preserving its nutritional value and marketability.
The Grain Pedestal Fan is constructed with a robust 2mm mild steel plate, primed and painted for longevity. Built-in corner
stiffening adds extra strength, allowing the fan to be easily carried and positioned in any setting including those with active machinery.
Available now, the fan is compatible with both 100mm and 200mm pedestals or spears, offering flexibility in its application. Its integral thermal contact ensures motor protection and the aluminium frame motors contribute to its durability while keeping the weight to a minimum. The fan is equipped with efficient IE2/IE3 motors that comply with (EU) 2019/1781 regulations, delivering high performance with reduced sound levels. Additionally, it comes with a one year warranty, providing peace of mind to the users.
Stuart Wilkinson, Technical Sales Engineer at Hydor, said: “We wanted to address the needs of grain storage facilities. Our goal was to create a reliable and efficient fan that enhances grain quality while extending its storage life. The result is a Grain Pedestal Fan that we are confident will exceed our customers' expectations.”
44
With its machines and digital solutions, the arable farming specialist Pöttinger is helping to make crop care work easier and even more precise. The new online application Row Crop Assist gives interactive support to get the optimum configuration of Flexcare row crop cultivators. First, it requests information on the planting process and the tractor that will be used for the crop care work. The application then shows the optimum row crop cultivator configuration in a way that is clear and accessible to everyone.
PROVEN TECHNOLOGY
Pöttinger has already successfully implemented the Tramline Assist application for an optimum tramline system in arable farming. For harvesting grassland, Haytool Assist makes it quick and easy to find the right tedder to match different mowers. Building on this success, Pöttinger is now launching Row Crop Assist to optimise the set-up of mechanical crop care machines.
The objective of all the Pöttinger Assist applications is to optimise farming processes using intuitive on-screen visualisation and outputting notification messages with recommendations. That's how complex knowledge is tailored to
ROW CROP CULTIVATOR CONFIGURATION MADE EASY
specific use cases and displayed in a way that makes it easy to use.
FLEXCARE IS AS FLEXIBLE AS YOUR FARM BUSINESS
Even the basic version of the Flexcare row crop cultivator from Pöttinger is unmatched in its ability to adapt to the needs of all crop types, the crop row widths, and the sitespecific conditions. The hoe elements and weeding tools can be adapted to different processing scenarios in just a few steps. Because climatic, social and political conditions are continuously changing, there is increasing demand to rethink existing arable farming strategies. The Flexcare row crop cultivator optimally prepares farmers and contractors for the future. The unbeatable flexibility of the row crop cultivator allows the farm to try out new crops and new planting systems without cost-intensive new purchases. This significantly lowers the barrier to start hoeing oil seed rape, field beans and cereals. In addition, it can be used for
contract work and by machinery rings to increase machine utilisation.
The Row Crop Assist applications provides support before and after buying a row crop cultivator to configure the machine in the best way possible depending on the seed drill and crop care technology used.
GET THE BEST WORKING RESULTS
The best working results depend on perfectly matched processes that minimise losses and make the best possible use of synergies. As an arable farming specialist, Pöttinger is also an expert in agronomic production systems. Maximum precision during the hoeing process is the key to the highest possible success in mechanical weed control. This can only be achieved by taking into account the previous sowing step.
The new Row Crop Assist is available on the Pöttinger homepage –www.poettinger.at – under the menu item Digital agricultural technology from mid-July 2024.
WHAT’S NEW
FLEXIBLE SWATH-LAYING VIA BELT OR AUGER
Disco large-scale mowers have been setting standards for area output, durability and efficiency for 25 years. With the new Disco 9300 Direct Swather with innovative auger technology, farmers and contractors can now choose between swath grouping or wide deposition even when mowing without conditioning. Alternatively, Claas is introducing the new Disco 9300 C Auto Swather with tine conditioner and cross conveyor belts, designed mainly for multi-farm use.
Disco large-scale mowers from Claas have been making their mark in the professional forage harvesting sector for large farms and contracting work for 25 years. The introduction of Auto Swather swath grouping in 2011 greatly increased the versatility of these machines. Since 2023, the Disco 9700 RC Auto Swather, one of the more powerful biomass mowers on the market, has taken efficiency and reliability
to a new level for customers working in the most challenging conditions with exceptional crop volumes of up to 60t/ha – thanks to the double roller conditioner with new HD drive concept and XXL belts designed specifically for crop flow in the roller conditioner.
Claas has added two models with a 9.10m working width to the product range, and now offers four performance classes for largescale mower-conditioners for power outputs from 180hp to over 400hp.
SPREADING WITHOUT A CONDITIONER
For farms which do not need a conditioner because they require longer wilting processes or have less powerful tractors, Claas has taken the tried and tested auger technology from the Direct Disc front attachment on the Jaguar forage harvester and systematically redeveloped it for grassland use in the new Direct Swather.
Designed for forward-thinking dairy farms,
the Disco 9300 Direct Swather large-scale mower features a host of clever details which for the first time provide four mowing and swath-laying strategies in this segment:
1. Full-width deposition for fast, effective wilting.
2. Mowing with integrated central swathing for fast, effective field clearance without tedding and swathing.
3. 18m mowing width consolidated to 12m swath (combined swath/wide placement) for active control of witing process and optimal forage harvester utilisation.
4. Mowing with one-sided swath laying for clearing the field margin.
FLEXIBLE SWATH-LAYING
By dispensing with the conditioner, the innovative large-scale mower can be operated with tractors from 180hp, and so extremely efficiently. Furthermore, it is suitable for all crops and all conditions – from high-yielding green rye for biomass production to gentle
mowing of alfalfa or late-season cuts of grassland with low growth. When dealing with low volumes of growth, especially in regions with low rainfall and a high number of sunshine hours, the absence of conditioner prevents too rapid wilting of the crop and enables active control of the DM content. The augers can be swung open for targeted control of the drying process and optimal adjustment of swath laying to the volume of growth and downstream harvest chain.
SUPERIOR CROP FLOW
The tapered Claas auger arranged close and parallel to the mowing discs ensures consistent, reliable crop pick-up even when growth is uneven. At the same time, the tapered design increases the feed volume towards the middle, as the increasing diameter of the auger enables more crop to be conveyed. In addition to the tapered design of the auger, the tapered auger housing with integrated ‘pockets’ in the rear is another unique feature. These pockets expand the available space, thereby significantly increasing the feed volume and thus the throughput.
Shear bar and knives at the auger outlet prevent crop build-up and so guarantee blockage-free operations.
Perfect coordination of mower bed, auger and auger housing pockets ensure uniform, blockage-free crop flow with minimum power requirement and maximum fuel efficiency. Early results indicate that the fuel consumption can be up to 40% lower than comparable equipment with conditioner.
Swathing plates mounted on the central console guide the crop flow under the mower frame. Additional hydraulically pivoting and adjustable swath curtains prevent crop being thrown out during one-sided swath laying. This ensures uniform swath formation under all conditions, maximising the efficiency of the downstream harvest chain.
PIVOTING AUGER
When mowing without conditioning, it is important to be able to use the full mowing width as a wilting area. The top-mounted auger drive in the Disco 9300 Direct Swather
enables the augers to be swung open hydraulically at any time, allowing the unprocessed crop to be deposited across the full mowing width. The augers can be conveniently swung open or shut individually or in parallel via Isobus – even while mowing is underway.
The unique design with tapered augers, large-volume conveyor channel and top-mounted drives as well as crop flow behind the augers enables high, blockagefree throughput.
THE CONTROL CONCEPT
The standard Active Float mower suspension can be adjusted to suit the harvest conditions via Isobus while mowing is underway. Working with the lowest ground pressure ensures forage-friendly, crop-friendly and fuel-efficient mowing. The optional Claas automatic slope control function regulates the ground pressure differently depending on whether you are mowing up-hill or downhill to reduce side drag and so minimise misalignment between front and rear mowers. What’s more, this form of electronic operator assistance enables sward-friendly slope work even in wet conditions.
For ultimate operator comfort, mower lifting is integrated directly into the tractor’s headland management system, while the mower’s loadsensing hydraulics are controlled directly via the Isobus on the tractor or the Cemis 700 or Cemis 1200 Claas Isobus terminals.
CONDITIONERS FOR ALL CROPS
The new Disco 9300 C Auto Swather uses the conventional steel tine conditioner to
WHAT’S NEW
pick up the mown crop behind the mowing discs and feed it to the cross conveyor belts. Although this has a higher power requirement, it guarantees reliable crop flow in all crops, even under challenging conditions. In addition, cross conveyor belts featuring speed control produce a particularly airy, uniform swath which results in higher throughput with a lower power requirement in the downstream harvest chain.
The integrated conditioner guarantees to speed up wilting significantly even in dense crops and with short periods of fair weather – making it a firmly established link in the harvest chain on many farms where top forage quality counts.
The new Disco 9300 C Auto Swather is approved for tractors with outputs of over 400hp and offers even greater wear protection while at the same time reducing the weight.
SMART MOWING
The intelligent control concept enables the front mower controls to be integrated into the Isobus of the rear combination, or the whole mower combination to be operated via the tractor’s headland management system –whichever the operator prefers. Furthermore, the Disco 9300 C AS offers unique comfort features such as automatic Belt Boost acceleration to clear the belt units at the headland, automatic belt speed reduction for one-sided lifting and automatic lifting of the mower units when shifting to reverse. The optional Claas automatic slope control regulates the belt speed and ground pressure when working on slopes to ensure optimum swath formation and sward protection while minimising drift.
Tuckwells has provided a 6R 185 to Morrisons
JOHN DEERE TEAMS UP WITH MORRISONS
John Deere tractors were delivered to Morrisons stores and the retailer’s headquarters for the 24 Hours in Farming event, #Farm24.
Machines were set up outside seven Morrisons stores to help engage the public in the initiative which aims to celebrate the hard work and dedication of those involved in the UK agricultural industry.
The tractors were provided by John Deere dealerships Ripon Farm Services, Tuckwells, Ben Burgess, Masons Kings and Charlies Ag and Turf. They were branded and parked up outside stores in Skipton, Boroughbridge, Ipswich, Norwich, Teignmouth, Welshpool and Witham for Morrisons customers to see before they entered the shop.
A tractor also took pride of place outside
the retailer’s headquarters at Hilmore House, near Bradford.
“With a focus on showing consumers what really goes on in the agricultural sector, 24 Hours in Farming is a great initiative that shines a light on farming and everything that goes into producing food for the Great British public,” said John Deere Tactical Marketing Manager Chris Wiltshire.
“All too often we hear about the disconnect between the food we eat and how it’s produced, so teaming up with Morrisons is a simple and effective way of reminding customers that there is a story behind every item of food they buy, just before they buy it.”
It is anticipated that well over 110m people will be reached by the day-long campaign.
Sophie Throup, Technical and Sustainability
Director, Morrisons Manufacturing, said: “We’re incredibly proud of our British food heritage and customers continue to tell us that shopping somewhere that supports British farmers is really important to them."
in Ipswich
Ben Burgess supplied a John Deere 8RX to the Norwich Morrisons
50
DUO DEMONSTRATION DAYS
SPECIALIST FRUIT AND VINE MACHINERY DEALER CELEBRATES 50 YEARS WITH DUO DEMONSTRATION DAYS.
Over 100 top fruit growers and vineyard managers travelled from across the UK to attend NP Seymour’s two-day specialist fruit and vine machinery demonstration event on 18 and 19 July 2024.
Alongside celebrating the Kent-based machinery dealership’s 50th anniversary and 40 years of working with Fendt to supply and service the manufacturer’s specialist 200 V/F/P tractors, growers could see a range of specialist machinery in action.
Hosted with the kind permission of Clive Baxter at JL Baxter and Son’s Amsbury Farm in Hunton, demonstrations were held on Thursday in the orchard, while Friday
focused on viticulture machinery in the vineyard.
Thanks to support from NP Seymour’s suppliers, attendees were able to chat with representatives from manufacturers including Fendt, AirJet, BMV, Braun, ERO, iMETOS by Pessl Instruments and Perfect van Wamel, as well as Nick Seymour, his daughter Claire Seymour, and the rest of the NP Seymour team.
While the weather was scorching, visitors could cool down with delicious refreshments from local producers Kentish Mayde, Biddenden Vineyards and Solley’s Ice Cream.
On the orchard day, owners, managers and
machinery operatives could watch a Perfect van Wamel T180 mower and OCLL QWector sprayer set up for spray-mowing operations. While time is one of the driving motivators, combining operations in the orchard or vineyard is not just about efficiency. By running two machines in a single pass, growers can save on fuel usage, reduce the hours their tractor works in a season (meaning fewer servicing and maintenance costs), and limit compaction in the alleyways. For some growers, there is also the potential benefit of not investing in another tractor or finding, training, and paying another operator.
On the mechanical weeding front, the orchard day also featured a demonstration of the Fischer variable-width swing wing mower, which suppresses weeds by getting right up to the trunks. This was followed by the Braun mechanical weeding cultivator with tillers, with the Braun team on hand to talk through its application and optimal set-up.
Growers could also see a Munckhof VariMAS 3-row sprayer a Fruit-Tec REDpulse orchard defoliator, and compare the different Fendt models and specifications side by side.
One of the most intriguing machines featured on both days was the AirJet ground aerator from Bury Turfcare. Owner and designer of the machine Peter Knight explained to growers how he had originally built the AirJet, which injects compressed air into the ground, for waterlogged golf courses and football pitches, but has since had significant interest from fruit growers looking to relieve compaction in the rows. The double-sided machine targets the air right into the soil near the roots, on both sides of the alleyway, every couple of metres.
On the vineyard day, the team from Braun started the morning by giving a thorough run-through and demonstration of the range of different mechanical weeding solutions available to vine growers. This started with the front-mounted double over-row stem cleaner, also fitted with a rear-mounted Braun Alpha mower equipped with double-sided finger weeders, before moving on to the mid-mounted disc plough and finally the front-mounted UKR universal frame fitted with LUV Perfekt cultivator with rotary tillers.
The next demonstration was led by Ralf Licht from ERO, Germany’s leading manufacturer of specialist viticulture machinery. ERO produces the double-row VITIpulse Combi defoliator and double-sided ELITE vine trimmers that were at the event.
It’s widely well-known that good ventilation in the fruiting zone reduces the risk of Botrytis and other fungal diseases, improves spray targeting and efficacy, and increases the berries’ exposure to sunlight, leading to better colour in red fruit and aromas.
With the VITIpulse Combi, more targeted defoliation results can be achieved as the
roller removes the external leaves, allowing the air blast to penetrate more deeply into the inner part of the canopy.
Later in the day, Stefano Borio from BMV showcased the Italian manufacturer’s E600 single-sided vine trimmer, better suited for small acreages.
From a sprayer point of view, the OCLL APUS5 gave growers an excellent chance to see the effective coverage provided by this simple and economical tractor-mounted air blast directional sprayer.
Finally, covering frost protection and crop monitoring, David Whatoff from iMetos UK was on hand to demonstrate the nMetos Frost for simple wet and dry bulb readings and the advanced iMetos 3.3 for a range of weather data readings. David also showed
the Dualex, a small hand-held device that can provide instant information on vine health, such as nitrogen balance index, chlorophyll, flavonoids, and anthocyanins.
“As the UK wine industry continues to grow and develop, it was not a surprise that the viticulture day was the busier of the two days,” said Claire Seymour, NP Seymour’s Sales and Marketing Director.
“We are deeply thankful to everyone who attended and showed their unwavering support, especially as we celebrate our 50th anniversary in 2024. More growers want to see the results these machines can provide in person and having an opportunity to discuss their capabilities with the manufacturers, our team and fellow growers is an even better bonus.”
WRI GHT SB RO KE RS ER VI
The safe and reliable way to buy and sell machinery and equipment
Wrights Farming Register offers farmers and contractors a uniqueservice through its team of brokers. They are the ‘men in the middle’ who give an impartial opinion on the items of machinery they handle on behalf of their clients. The brokers, who currently cover an area stretching fromthe Scottish borders to the South Coast, can save farmers time and money when it comes to buying or selling anything from acombine harvester to a cattle trough. In these security-consciousdays, they also provide adiscreet alternative to apublic farm dispersal sale and can help farmersavoid the tax pitfallsthese can cause.
Shaun van den Bos
Tel: 01652 618221
Mob: 07850 978188
shaunvandenbos@gmail com
www shaunvandenbos co uk
Robin Sparrow Tel: 07831 886601
robinsparrow@btinternet com
CONDITIONS CATEGORIES
EXCELLENT Full workingorder,bright andundamaged paintwork, low usagefor year
VERY GOOD Mechanically sound, will go straight to work,little wear for year
GOOD Clean and tidy,mechanicallygood, mayrequireservice or minimal repair
AVERAGE Complete unless stated,normal wear andtearfor age, mayneed somerepairs. Thedescriptions areprovided as aguide only and relate to machine condition when inspected by the broker
WRI GHT SB ROK ER SE
AUGERS
S10430 6INCH TRANSMATIC Grain auger appx46feet long with Carriagefitted with castorwheels and 3phase motor Good Condition %$Shaun 07850$978188
BALERS &BALE HANDLING
RS1597 BLACKSMITH BALE
SPIKE Single bale spiketofit Manitou (Located Nr Kenilworth) Good Condition £350 %$Robin 07831$886601
RS1603 2006 MASSEY FERGUSON 139 SB BALER
Central 1.9mt Pick Up.Twin Auger Feed,Bale Chamber 42M X37M, 1000RPM PTO, SedgeHitch. Floating Pick Up with Hydraulic Lift,, Full road Lighting Located Nr Kings Lynn MorePhotos on request Transport canbe arranged Very Good Condition £10550 o.n.o. %$Robin$07831 886601
S10409 TRENONA TWIN BALE Squeezer, 3pole hydraulic grab to pick up 2wrapped bales. FittedEuro8loader brackets. Very Good Condition %$Shaun 07850$978188
S10471 2022 LSMV50F
BUILDINGS/STORES
RS1624 BUILDING EX WORKSHOP
CRAWLERS &EQUIPMENT
S10522 INTERNATIONAL
RS1595 SIMBA6MT DOUBLE PRESS
RS1633 QUIOGNE 4MT
All steel frame metalclad Width 24ft- Length 601ft Hight to Eaves15ft 3/4 Mezzanine Floor,Big 6Roofsheetswithy Zpurlins and corrugated steel sheetcladding,Substantial Steel Stair to 1stfloor Sliding doors
All nowdismantledHas been used as awork shop.Purchaser to Transport, Morephotoson request LocatedNrStafford
Good Condition £6000 o.n.o.
%$Robin$07831 886601
COMBINE HARVESTING EQUIPMENT
RS1583 MATROC Rape Side Knife to Fit John Deere1166 Combine notusedfor twoyears Photoson request LocatedTonbridgeKent
Good Condition £750 %$Robin 07831$886601
RS1591 1992 MASSEY FERGUSON 38
BTD6 Crawler Tractorc\w Hydraulics, PTO, Drawbar & lights.(Nolinkage)Repainted and overhauled by RH Crawford &Sons. Very Good Condition %$Shaun07850$978188
S10541 INTERNATIONAL BTD6
Crawler with 12 inch tracks, very good pins &Sprockets. Drawbar and recently covered seat and armrests.Thistractor has been ashowwinner and still has that quality aboutit. Very Good Condition %$Shaun 07850$978188
CULTIVATION EQUIPMENT
Cast SteelRings,, Hydraulic folding and Transport Wheels, In good working order (one broken ring) LocatedSelborne Hants) Good Condition £4500 o.n.o.
%$Robin$07831 886601
RS1616 SHOTBOLT24F TROLLS
Twenty four inch Rings Hydraulic Folding and Transport wheel Rings almost as new, Working this spring LocatedNear Newmarket Transport canbe arranged at cost,. Morephotoson Request Good Condition £3750
%$Robin$07831 886601
RS1619 DIABLO24MTROLLS
“X”Pattern Disc Harrows with 20inch Discs, Very clean ready to go to work Morephotoson request LocatedNrNewmarket, Manual Folding,Hydraulic Transport Wheels Very Good Condition %$Robin$07831 886601
RS1635 CONCEPT3MT POWER HARROW
Free standing 3point linkage Waste material baler,steel tying, poweredbytractor hydraulics and12v system, Will turn waste plastic, cardboardand tyres into saleable bales. New& unused NewCondition %$Shaun 07850$978188
S10473 2004 ORWAK3800 Free standing waste material baler Poweredby3 phase electrics. Notusedlately butOKwhenlast in use AverageCondition £1750 %$Shaun 07850$978188
S10612 RUSSELL FLAT8 Bale grabsfor conventional balesc\w toprams and loader brackets. Stored inside choiceof2 Good Condition £300 each %$Shaun 07850$978188
BEET HARVESTING EQUIPMENT
RS1391 CT M950 RS
BeetCleaner Loader With Deutz Diesel engine startsonthe button. Hydraulic Fold, Hopper Extension Double Chain Link cleaner web, Twin Brockiemer unloading web, in use this autumn Very Good Condition £6500 %$Robin$07831 886601
combine Harvesterc/w 20ft
PowerFlowHeader(Droningberg)
Valmet240hp Engine,Tyres 85%
good Front 650-75 R32,Rear 50060 22.5 ngood working order used this harvestlocated Nr Grantham Morephotosonrequest
Good Condition £11000 o.n.o.
%$Robin$07831 886601
S10440 1984 JOHN DEERE 1075
RS1458 FARMFORCE FRONT MOUNTED PRESS 3point linkageFurrowPress all rings sound Photosonrequest Good Condition £500 o.n.o. %$Robin 07831$886601
RS1461 GANG ROLLS5MT
18” Half Breaker Rings Hydraulic Folding And Transport wheels. MorePhotosonRequest,Located Nr.Newmarket AverageCondition £3500 %$Robin$07831 886601
RS1628 BOMFORD SUPERFLOW
c/w Packer Roller good Tines HeavyDutySelector speed Gear BoxLocated Nr Bury St Edmunds MorePhotosonrequest Good Condition £2750 %$Robin$07831 886601
S10449 2006 KONKSKILDE DELTA
Trailed Ring rolls £mt Center &2 1mtPupsLocated Nr Spalding MorePicturesonrequest Good Condition £1250 o.n.o.
%$Robin$07831 886601
RS1546 SIMBATOP TILTH 7-2MT
14ftcut Combine Harvesterin
Good working order fittedStraw chopper and SG2 Air concab Plus Bed Trolley. 28.1 -26drive tyres, 18 inctrack grip rears. Recent concaveand feed elevator. Rare Iowner driver combine Very Good Condition %$Shaun 07850$978188
S10491 JT ENGINEERING SIDE
KNIFE Bolt on electric 12v type
C\w Framefor John Deere818 header Good Condition £300 %$Shaun 07850$978188
S10534 ZURN 24 FT rape extension forNew Holland TX headers. Fittedmechanical side Knivesateach end. Storedin barn Good Condition %$Shaun 07850$978188
S10535 CHEVAL 20 FT Rape extension ForNew Holland Combines. FittedZiegler electric rape knives at each end. Good Condition %$Shaun 07850$978188
Seed Bed maker.Front Levelling BoardDouble Row of Pig Tail Spring tinesLargePacker Roller,followedbysingle rowofPig Tails, Followedby Smaller Packer Roller Really Good working order,Only used on Fenland, Dry Stored For sale due to semi retirement LocatedNearPeterborough Very Good Condition £8500 o.n.o. %$Robin$07831 886601
RS1547 SIMBADOUBLE PRESS
3-5M,T Front one Rowoffixed Loosener TinesFollowedbyTwin Pressed SteelPacker Rollers Hydraulic Transport Wheels and End TowDrawBar Very Good Condition £4500 %$Robin 07831$886601
RS1548 GALUCHIO TWIN
PACKER ROLLER 5-5MT front Rigid levelling Tines&Twin Cast steel Packer rollers’Hydraulic Folding &hydraulic transport Wheels Dry Stored, Fenland Farm. LocatedNr. Peterborough Good Condition £5250 o.n.o. %$Robin 07831$886601
12ftWorking Width 13 Tines StraightTines, reversible Points, Metalwork Sound, Paint Poor no BreaksorWelds,. No Depth Wheels Good Condition £1150 %$Robin$07831 886601
RS1630 SIMBA4.2 FURROW PRESS
22 CastSteel rings 36 inch diameter, Hydraulic end tow transport Wheels. Good tyres Chain ScrapersMorePhotoson Request LocatedNrNewmarket Good Condition £3250 o.n.o.
%$Robin$07831 886601
RS1631 SIMBA6.5MT FURROW PRESS
Single Rowof34X36inch Cast steel Rings, Hydraulic End Tow,,, MorePicturesonrequest Located Nr Newmarket Good Condition £3750 %$Robin$07831 886601
3M Stubble Cultivator with 7 Sprung back legs with points and wide wings. Plus 3pairs of angled discs and 3m Kerner crumbler packer.Done little work Very Good Condition %$Shaun 07850$978188
S10552 EDLINGTON CAMBRIDGE Trailed Rolls, Traditional Mother & Pupswith 10ftCentreand 2of6ft 6ins Rolls all fittedwith good 24 Inch Crimp rolls Good Condition %$Shaun 07850$978188
S10595 BLENCH SPRING TINE 2 Bar front or rear mountable 12ft Wide spring tine cultivator all sound with good tinesand points Good Condition £350 %$Shaun 07850$978188
S10597 BOMFORD SUPERFLOW 8ftwide 3barswith 9standard draft legs with good reversible pointsand sound frame Good Condition £300 %$Shaun 07850$978188
DE-STONERS
RS1126 2000 NETAGCO REEKIE BEDFORMER
2Row C/w markers.all new Metal. Front or Rear Mount With tractororbed tiller Readytogo to work. MorePhoto’s on request transportcan be arranged at cost to be agreed Very Good Condition £1000 o.n.o. %$Robin$07831 886601
WRI GHT SB RO KE RS ER VI CE
DISC HARROWS
RS1544 SIMBASERIES 25-4MT
HeavyDutyDiscs Hydraulic Folding Hydraulic transport Wheels, Road Lights,Rear tow hitch Refurbished twoyears agoonly used on the fenSale due tho retirement, Dry Stored, LocatedNear Peterborough Good Condition £5250 %$Robin$07831 886601
Disc harrows hydraulicFold and Transport,. Good tyres.30” disc Rear tow hitchplus Rear hydraulic Service, Full Road Lights dry Stored, of the FenLocated Nr Crowland,, MorePictureson request Good Condition £5550
%$Robin$07831 886601
S10417 GALUCHO 3M Trailed Offset disc harrowswith 21 inch cutawayfrontsand 23 inch cutawayrears.Fitted Rear drawbar and 10/75 -15.3
Tyresontransport wheels
Good Condition %$Shaun 07850$978188
S10575 MF 520 12Ft Trailed X pattern disc harrows, rigid with good 20Inch Scalloped discs on the front and plain inch discs on the back axle.Reardrawbar
Good Condition %$Shaun 07850$978188
DRIERS
RS1586 CONDOR GRAIN STORE EQUIPMENT To included 2x Horizontal Chain type conveyers 1verticalcup type elevator Record Fan,,Laichenbury Cleaner All fittedwith3 phase electric motors All Steelstair wayc/w side railstobesold separately Good Condition £1000 Offers
%$Robin 07831$886601
RS1599 2019 OPICOMAGNA 20 Q5
Batch Drier Diesel Fired 3phase Electric Done less than 250 Tons from NewC/W 20 TonWet Grain Bin, Auto Feed.MorePhotos on Request.Viewing Highly Recommended, LocatedNear Aylesbury BucksDrier
£45,000 Bin £8,000 Excellent Condition
£53000 o.n.o. %$Robin$07831 886601
S10610 TYPHOON PLYWOOD GRAIN TUNNEL
45ftlong 8ftby4ft In 6ft
Sections with 10 inch lateral spigotsfitted.Built in sections with topwalkway giving 2ft moreheightfitted rails. Possibly Available with 30 HP Typhoon
TC4Cyclone Fanifrequired
Very Good Condition %$Shaun 07850$978188
DRILLS
RS1386 KLEIN UNICORN
DirectDrill Fittedwith Twin Alfa
Accord Seed HoppersHarrow Bar &loading table End Tow, Dry StoredLocated Nr Oakham
AverageCondition £2350
%$Robin$07831 886601
RS1566 VOGLE NOOTE MASSTER A300
12 RowBeetDrill Chain Driven, Finger wheel Coverers,Hydraulic BoutMarkers EndTow for Transport Very CleanReady to go to work old butwell looked after Morepictures on request
80% Good Ready to go to work. MorePhotosonrequest LocatedNrStratford on Avon
Very Good Condition £14500
%$Robin$07831 886601
RS1476 2019 KUHN HR 4004
4MtPowerHarrowCombination
Drill c/w TungstenPowerharrow Tines., track Eradicators& LC402 Combi Liner Drill Only Done 600Hectaresitcome with Fraser 4.5mt 8ton LowLoader Transport trailer and Many Spare PartsLocated Near Atherstone Warks, Morepictures on request
Excellent Condition £28000
%$Robin$07831 886601
Combi PowerHarrow/Drill Power harrow ArteraGrip 300 Drill on 15cm RowSpacing Disc Coulters, Packer Roller,Finger Harrow Bar, Tramline Kit, BoutMarkersElectro Controls. Used This autumn. LocatedNr. Coventry More PhotosonRequest Transport at pricetobeagreed Very Good Condition £6500 %$Robin$07831 886601
RS1582 CARRIER 4MT £Point LinkageMounted.Grain only Drill Fittedwith Amerzone Hopper Extension,7” rowspacing Triple Ktype coulters. Reekie Following Harrow Pneumatic LowpressureTyres. Transport Trailer with Hydraulic LiftDry Stored Morepicturesonrequest LocatedNr. TonbridgeKent. Good Condition £2750 o.n.o. %$Robin 07831$886601
RS1610 KR MR406
Three Point Linkagemounted 48 coulter Pneumatic Seed Drill
6.5mt Working width Approx 13.5cm spacing,Land wheel
Metering Track Eradicators, Tram line kit Reekie Type Following Harrow,Weather Canopy, More Photo On RequestLocated Nr
Saffron Walden Good Condition
£2550 o.n.o. %$Robin$07831
886601
S10444 STANHAYRALLYE 590 12
Rowhydraulic folding cell wheel precision drill fittedwith ceramic coulters. Front clod pushers, rubber presswheels front and back of coultersplus narrow rubber presswheel.Long arm hydraulic markers Good Condition £2500 %$Shaun 07850$978188
6M Hydraulic folding Tine drill. FittedAccess step, Hydraulic Fan, Hopper cover&Extension, 4wheel track eradicators, Long arm hydmarkers. 4x23-10.50 -1 Floatation tyres.Straight tidy drill with good points Very Good Condition %$Shaun 07850$978188
S10481 2002 RECO MASCHIO
PE 300 PENTA Combination Drill mounted on 3M Maschio DM3000 Powerharrowwith good QR tines, double wheel eradicator tines and largepacker roller with afew sparescrapers. Drill has Suffolk coultersin2rows, long hydraulic markers, following harrow,access stepand preemergencemakers (4 Tube shutoff valves) Very Good Condition £3500 %$Shaun 07850$978188
S10603 HESTAIR STANHAY12
ROW Rigid Precision drill set up forsugar or fodder beet FittedEnd tow kit, soft rubber wheels, Suffolk couter, narrow presswheels and split conical rear wheels. Sound usable drill Good Condition £950 %$Shaun 07850$978188
ELEVATORS &CONVEYORS
RS1506 CARIER GRAIN ELEVATOR 34fthigh X9”Belt 3 Phase electric Dismantled ready to Transport Location,Maidstone Photosnot yetavaiable transport canbearranged Very Good Condition £650 %$Robin 07831$886601
RS1507 PERRYANGLEVEYOR 34ftHigh X9” Belt 3phase electric Dismantled readyfor transportLocation Nr Maidstone PhotosNot Yetavailable Good Condition £400 o.n.o. %$Robin 07831$886601
RS1508 CARIER GRAIN CONVEYOR 24ftlong x8”wide Dismantled Readyfor transport Photosnot yetavailable Located Nr.Maidstone Good Condition £400 %$Robin 07831$886601
RS1560 RUSSEL 45 SLEW
S10478 HAITH 80CM Cleated elevating conveyer,60cm wide with 4cmcleats. 3phase elevates from 1m to 2m Good Condition %$Shaun 07850$978188
S10504 CARIER 40FT Belt & Bucket Grain ElevatorAppx20 TPH. Each leg 10 x7ins externally Footprint 25 x13. Built in 8ft sections. 3phase motor. Buyer removes Good Condition %$Shaun 07850$978188
S10506 CARIER 40FT Double Leg belt &BucketElevators Each with 17 ins by 8Ins legs and 17 ins by 31 ins Footprint. 3phase motor. Inside Choiceof2 Good Condition %$Shaun 07850$978188
S10507 CARIER BELTCONVEYERS 10Ins beltsappx40M Long, installed in roof to feed bins. AverageCondition %$Shaun 07850$978188
S10510 CARIER OVERHEAD Galvanised Chain &Flight Conveyersappx26m long.2of Each with 6double sided outlets fittedchain to open and change across. Very Good Condition %$Shaun 07850$978188
S10511 CARIER OVERHEAD Galvanised chain &flight Conveyer,estimated to be 40m long presently transferringcorn acrossyardsupported by sturdy support from 20m long about7m up in the air all Galvanised and accessible Very Good Condition %$Shaun 07850$978188
S10512 CARIER CHAIN &FLIGHT 8Inch Galvanised chain &Flight conveyer in 2.4m Sections total 10m installed butquite accessible.Also 2OfTop fill Galvanised 8inch chain &flight with poly tip conveyers appx25ft long Good Condition %$Shaun 07850$978188
S10514 CARIER BELT CONVEYERS In Steel troughs, belts290mm wide,with 3phase drives.2Appx 150 ft long AverageCondition %$Shaun 07850$978188
S10570 SWIF TLIF TINTERSTORE SL - I115T
33ftLong including extension Rubber Belted Potato/Grain Elevatorwith Both Grain and PotatoHoppersRecent Refurbished Electric motorDry Stored Done little Work Located East Sussex Good Condition £2500 %$Robin$07831 886601
S10477 MAGNA POWER MC60/3400 Cleated elevating conveyer, 60cm wide with 4cm cleats. 3phase elevatesfrom 1m to 2m Very Good Condition %$Shaun 07850$978188
35ftRubber belt Elevator, with 2ftHiSpeed throwerattachment, Hydraulic up and down. Standard manual swivel wheels plus oblong hopper with castorwheels under Very Good Condition £3500 %$Shaun 07850$978188
S10571 FYSON33F T AUTOSWINGER Rubber 20 inch belted elevator, with 9ftslewing head.. Full hydraulics inc belt drive, up &Down. Standard swivel legs. Choiceof2 Good Condition £3000 each %$Shaun 07850$978188
S10572 FYSON34F TELEVATOR C\w End chute,3phase motor, largehopper.Basic elevator butsound with 20 inch belt and hydraulicup&down Good Condition £2000 %$Shaun 07850$978188
S10573 WYTRAC26F T Rubber
20inch belted elevatorfitted Single phasemotorand 7ft6ins extension. Fixed wheels on single axle.And castorwheels under base.Small hopper.Working order butold. AverageCondition £750
%$Shaun 07850$978188
FANS
RS1557 NECO 30 HP FAN 3Phase 50 HZ CentrifugalDryer Fan( Unused,) PhotosonRequest, Transport Available New Condition £4000 o.n.o. %$Robin 07831$886601
S10480 ELTA 11 KW Round fans forcorn aeration etc. 5 available 2withauto opening vent sections. Galvanised steel, 3phase 1m diameter0.45 deep Good Condition £300 each
%$Shaun 07850$978188
FEED &FORAGE BOXES
RS1609 JF STOLL BELLAIR 2008
Self Loading StrawSpreader
BlowerBedding MachineIn
Good working order ForSale due to change in Farming policy,MorePhotosonRequest, LocatedSaffron Walden, Essex Good Condition £2500 o.n.o.
%$Robin$07831 886601
FERTILISER SPREADERS
RS1236 KRM 2.5 TonHopper,4 x600 kg Bags,Twin Disc Spreader Stainless Steel discs,Set to 24 mtsbut will do 36 mtr.Constant weighingelectronic Control Box, Fold overHopper cover, Full road Lighting,Morephotoson request,Located Nr Wisbech Very Good Condition £3500 %$Robin 07831$886601
RS1570 2000 AMERZONE N2000 Twin Disc Fertiliser Spreader 24mt Spread Hearland discs Weather CanopyHydraulic On/ OffMud flaps, Dry Stored, not been used for3 yearsPhotoson Request LocatedNrWallingford Oxon Good Condition %$Robin 07831$886601
RS1611 KRM TREND SYSTEM
Twin StainlessSteel Disc up 24mt spread Hydraulic cutof, Manual Calibration Front Mud Flaps, 2ton all SteelHoper Weather CanopyAnd Road lights Photos on request, LocatedNrSaffron Walden Good Condition £550 %$Robin$07831 886601 S10452 2017 SULKYDX30+
Twin discmounted fertiliser spreader with TribordWPB on boardweighing system
S10496 2006 AMAZON ZAM1200 Twin discspreaderc\w 2 hoppersextensions, cover&grids. 18 -24m discs, twin hydraulic shut offs one shuttingoff headland kit via tap. Holds appx 3x12cwt bags Good Condition
Mounted Twin Spinning disc spreader.FittedB910 &B610 hopper extensions to carry 4 half tonbags. Plus Headland kit, Hopper grids and cover. Tidy for age, 24M discs Good Condition
£600 %$Shaun 07850$978188
S10631 HORSTINE FARMERY
CASCADE 20M Mounted pneumatic Fertiliser spreader c\w part alloyhydraulic folding booms with poly tubes. Polythene tank holds appx3bags. PTO driven fan. Only used forone season Good Condition £3000 %$Shaun 07850$978188
FORKLIFTS &HANDLERS
RS1587 2011 JCB 541 LOADAL SUPER
WRI GHT SB ROK ER
GRAIN EQUIPMENT
RS1530 COLLINSON 12 TON
Grain/ Feed Hopper Side DischargePurchaser to Dismantle, Fork liftavailable to help loading MorePhotosonRequest Located Nr nuneaton AverageCondition
£750 %$Robin$07831 886601
RS1567 GRAIN PUSHER Locally Made Fittedwith Matbro Back PlatePhotosonrequest Good Condition £450 %$Robin 07831$886601
S10499 MOBARK 5X10
OSCILLATING
Screen Dresser fitted15Kva 3phase motor. C\w various screens. Mounted on Substantial Iframe beams. Suitable formost Screening jobs. Good Condition
8100 Hrs, Hydraulic Lock Pins on Head Stock Tyres50% good Bosch Suspension Seat, PU Hitch, 3rdlineHydraulic service, Boom lights,Morephoto on request, LocatedNrGrantham Very Good Condition £28000 o.n.o.
%$Robin$07831 886601
RS1590 NC ENGINEERING SHEAR GRAB
%$Shaun 07850$978188
S10598 SINAR GRAIN SPEAR
6300 Moisture analysing spear, will assess temperatureand moisture content of grain. Very Good Condition %$Shaun 07850$978188
S10626 CONCRETE WALLING SECTIONS
5ft6” (or1.70mt) width c/w
JCBBracketsComplete KV Tineslocated Nr Grantham, more photosonrequest Good Condition
£1250 o.n.o. %$Robin$07831 886601
S10578 2022 JCB 542 /70AGRI EXTRA
LShaped one meterwide Heavy concrete walling 2.5m tall with 0.7m feet.7pieces plus one corner section. Also 17 Concrete“ Lego “Blocks1.6m long by 0.8m by 0.8m plus 2of0.8m square. ( Near Grantham) Good Condition
%$Shaun 07850$978188
GRASSLAND EQUIPMENT
Hi Spec telehandler with Torquelock transmission, Air conditioned cab, Pick up hitch, trailerbrakes, Spool connections front &back. Quick fit hydraulic locking carriageand 360 degree LED lighting.3400 hours. 500/70
R24 Industrial pattern tyres. Very Good Condition £77500 %$Shaun 07850$978188
RS1367 2018 MA JOR MJ30 350 Cyclone Finishing Mower TractorMounted PTOdriven, Hydraulic Folding Large DiameterRoller,Mutirotary disc cutters, Galvanised Hood Full Road Lighting,Hardlyused as New. More photosonrequest, Transport canbearranged Excellent Condition £6250 o.n.o.
%$Robin$07831 886601
RS1398 GEOBROWNS 2.3 FLAIL MOWER
C/W Hydraulic Side shiftMulti Point CAT2Linkage. Whale Tail CastSteel Flails, HDRearRoller, Opening Rear Access Door More photosonRequest,OverRun Gearbox Excellent Condition £4850 o.n.o. %$Robin$07831 886601
Self Propelled Forage Harvester,Fully Floating 2.5mt Pick Up reel Header,25m Precision Chop Cutting Drum 180Hp V6MercedesDiesel engine, NewClutchLastyearvarious New beltsin2023 Readytogotowork Good Condition £7750 o.n.o.
%$Robin$07831 886601
RS1622 2004 JOHN DEERE 1145 OUT FRONT MOWER
Rotary Deck 5ft cut, well maintained in good working order,Stars on the button Only 1500hrsNew Gearboxoncutting deck, recent servicelocated nr WinslowBucks,Morephotoson request Very Good Condition £6500 o.n.o. %$Robin$07831 886601
S10424 RITCHIE 6M Mountedset of Hydraulic folding Grassland harrows. FittedReversible Cast harrow mat. Tidy condition. Good Condition £2000 %$Shaun 07850$978188
S10437 RECO FERRI 5ftLeftHand Offset-able Side Flail mowerwill go outoruptocutverges andlow hedges Good Condition £1750 %$Shaun 07850$978188
S10451 2019 KVERNELAND 8555
5.5 M4 Rotor7tine mounted Hydraulic folding tedder with 4 wide tyres.Seen little work and storedinside Excellent Condition £4950 %$Shaun 07850$978188
S10464 2000 RECO MENGELE
SH 40N Trailed Full chop forage harvesterfitted PU 1800 Pitch up header 1.8m wide.Fitted in cabhydraulic spoutswivel and electric chute elevation. Electric blade sharpener &Pick up hitch. Good 11/5 -15.3 tyres Good Condition £5000 %$Shaun 07850$978188
S10594 2004 MUTHING MOL /S200 Mountedhydraulically offset-able 2m wide flail mower with heavydutyflails and roller Good Rams, long PTOshaft. Useful and generalpurpose verge mower Good Condition %$Shaun 07850$978188
HEDGECUTTERS
RS1634 BOMFORD 90 6.59
TELESCOPIC
Tree point LinkageMounted, 4ft Head, Jflails Rear roller,Electric Controls Debris Blower, More photosonRequest LocatedNr Newmarket Good Condition £3750 %$Robin$07831 886601
RH 3Point LinkageMounted Fully IndependentPTO driven hedger 2.7M Reach with 800mm YFlail Head inc roller.Comeswith 1.3m Knifesection cutter baraswell (Unused). Has 4leverincab controls. As newhardly used & Storedinside Excellent Condition £3500 %$Shaun07850$978188
IRRIGATION EQUIPMENT
RS1585 FORD WRIGHT RAIN
2ofIrrigation Pumpsc/w Primers FittedtoFord6 cylinder 100 hp EnginesPrice Ex Farm Located Nr Tonbridge, Kent, Photoson request Good Condition £2400 each %$Robin$07831 886601
S10431 BAUER 5INCH
Irrigation pipesappx6mLong, Appx50available Very Good Condition £80 each %$Shaun 07850$978188
LIVESTOCK EQUIPMENT
RS1626 CALF VERANDER !5ft X 15ft All steel Galvanised Frame Transport Wheels Coated Weather ProofRoofing with 4ftover hang LocatedNrLeicesterMore Picturesonrequest Very Good Condition £2000 o.n.o. %$Robin 07831$886601
S10408 GALVANISED FEED BARRIERS 2ofFreeStanding in boxsection with timber lower panel. 139cm high, 452cm long with 50cm feet Very Good Condition £300 each %$Shaun 07850$978188
S10436 PORTEQUIP CALF CREEP Feeders, 2Ofpainted redintidy order,little used Very Good Condition %$Shaun 07850$978188
S10517 2013 FULLWOOD MERLIN
ndition HPC
Milking Robot, Single Phase plus compressedAir.Fully Stainless steel unit milksone at atime automatically buthas an alarm to ring youinthe event of an issue Also IncludesPlateCooler, Remote switch, Single phase Vacuum pump to milk and HPC Kaeser Sx3Sigma Air centrecombines Compressorand Air drier, also single phase butneeding attention. Good Condition £17500 %$Shaun 07850$978188
Free standing standardpainted crush with timber floor,straight and sound with 3point linkage attachment pointstotransport. Good Condition £425 %$Shaun 07850$978188
LOADERS AGRIC/ INDUSTRIAL
RS1615 FARMHAND F9H
DriveinPowerloader to fit Ford 5000 &Ford66rangeC/W Hydraulic Spool valves,Nearly NewMuck Fork, big bale Spike {Plus 6ftGrain Bucket is available as well)MorePictures on request, LocatedNrStowmarket,More Photosonrequest Good Condition £1250 o.n.o. %$Robin$07831 886601
S10489 TOETIP BUCKET 1.8M
Wide by 1.35m deep C\w loader bracketsonback believedto be Cameron Gardner Average Condition £500 %$Shaun 07850$978188
S10615 MATBROTELERAM
TURBO Articulated Telehandler c\w Solo joystickcontrols, Clarke speed transmission. hydraulic locking Pin &Cone attachment system. 50 %15.5 -80-24 tyres.Sound machine,but has alittle rustaround the edges Good Condition £7500 %$Shaun 07850$978188
MISCELLANEOUS
RS1569 AIR COMPRESSOR
Current test cert..Air line airtank Approx 20” =5CM diameter53” =135 Length Good Working Order Photo on Request Good Condition £550 %$Robin 07831$886601
RS1618 POST HOLEDIGGER 12 INCH AUGER PT ODrive Done Little Work Dry Stored Ready to go to work Photoson request,Located Nr Stowmarket Good Condition £250 %$Robin 07831$886601
RS1625 AG 175 DISPENSER
Side delivery Sand or Feed Dispenser,for CubiclesHydraulic DriveJCB Quick attach Brackets LocatedNrLeicester Morephotos on request Good Condition £1250 o.n.o. %$Robin$07831 886601
RS1632 LEMKEN 4FURROW
Furrow Press90cm Rings More photosonrequest LocatedNr Bury St Edmunds Good Condition £750 %$Robin$07831 886601
C/Wextralong Draw Bar with Ring Hitch,Super Single Wheels TyresGood Air Suspension, Hydraulic Brakes. LocatedNr Bury St Edmonds Transport can be arranged Good Condition £1450 %$Robin$07831 886601
S10265 THOMAS MOUNTED Material layer,3point linkage mounted to lay material over beds forweed prevention. Galvanised frame 2.5m wide overall will take rolls up to 2m wide.Has 2rubber heightwheels, 4angle discs and roller.Been used with Tildent Mulchtex1.5 x 100cm x50. Very Good Condition %$Shaun 07850$978188
S10274 GATE BARRIER Single arm type in 60mm Box5.3m wide.C\w 2posteach1.8m by 100mm. PaintedGreen NewCondition %$Shaun 07850$978188
S10472 CHASE TITAN 7LOADING RAMP Appx10M long and 2.2m wide.Rated at 7Ton. Ideal for loading Flat trailers. Getting rare Good Condition %$Shaun 07850$978188
S10583 WIDE PAILING FENCE
S10617 20 KVA Trailed Generator poweredby4Cylinder BMC diesel engine.OnSingle axle chassis with 10/75 -15.3 Tyres, Under engine fuel tank,Rain cover, 240v 13 amp and 440V 16 amp socket Good Condition %$Shaun 07850$978188
S10624 RAILWAYSLEEPERS 2.5m (8ft 5ins) Long 8inch by 5” creosotedextrack reclaimed sleepersinmixed condition Good Condition £20 each %$Shaun 07850$978188
S10627 BIG BRUTE INDUSTRIAL
Vacuum Cleaner suitable for Grain storesetc.Fitted3 Motors all single phase.Mounted on Galvanised palletised trolleywith wheels and handlessocan be wheeled or movedwith forklift. Quantity of 3Inch suction hose Very Good Condition %$Shaun 07850$978188
S10628 2010 RUSMAIL QD 300/2
INCLINED FLIGHTED Conveyer 2m Long fittedcleated belt with 30mm cleatslifts to 1.5m high. Single phase seen very little use Adjustable legs. SWL75Kgs Max load 25Kgs Very Good Condition
%$Shaun 07850$978188
MUCK &SLURRY EQUIPMENT
RS1542 2004 BUNNING HIGHLANDER 20TON
RS1637 2021 BELMACROTARY SIDE SPREADER
Almost newSaledue to retirement Full road Legallights and Brakes, PTODriven Rota. Hydraulic opening topDoor for easyLoading NeverBeen on the Road Done Less than 50 loads from New, located Nr Brentwood, Essex. MorePhotosonrequest Excellent Condition £6250
%$Robin$07831 886601
S10469 SEPCOM BIO
SEPARATORS Choiceof2c\w
2.2 Kw 3phase motors on galvanised steel stands. Appx 6” centre augers with 0.75 Stainless steel screens. Very Good Condition £5500 each %$Shaun 07850$978188
S10470 2011 DI VERRAALDIVIO
400 Slurry separator., Free standing boxtype unit with 6.5 inch feed. Good Condition£2000
%$Shaun 07850$978188
S10564 2010 CLA AS ZERION 3800 SADDLETRAC
RS1456 DOWDESWELL DELTA 100 S 4furrow14” reversible on SlattedBoards Hydraulic Vari Width Manureskims &depth Wheel, Sorry No Photos, Located nr Bury St edmonds Very Good Condition £2750 o.n.o. %$Robin 07831$886601
RS1457 KV FURROW PRESS 4 FURROW
In Good working order in use this AutumnRings all sound, More PicturesonrequestLocation Bury St Edmonds Good Condition £550 o.n.o %$Robin$07831 886601 RS1501 2013 DOWDESWELL 105MA
In 30ftRolls on Pallets6Rolls per pallet. 3ft6ins high 3.5 ins spacing @30per roll. 50 rolls of Oakand 80 of dipped( decking oil) pine (£10 per roll less New Condition £85 each %$Shaun 07850$978188
S10586 HEAVY DUTY HORIZONTAL LOGSPLIT TER
Trailed Spreader,Air brakes, Sprung Draw Bar,Spinning Disc & Horizontal Beater,Variable Speed Floor,WeightCells, Rear TowBar In working order,ready to go to work (2 Machines available, PriceisPer Machine) Located Nr.Ashford Kent Good Condition £9000 o.n.o. %$Robin$07831 886601
RS1576 BUNNING HIGHLANDER 12TON
ForwardControl Self propelled fittedwith SGT Slurry kit with tank andfront mounted Vogelslang pump and snorkel kit. Joystick operated canfilling 6minutes. Cat 4rearlinkagefor injectortoolbar etc.800/900 /65 R38Floatation tyres.2Speed Hydrostatic transmission and Climatecontrolled cab. Good Condition £87500 %$Shaun 07850$978188
PLOUGHS
RS1434 1999 DOWDESWELL DP120S
5furrowreversible (4+1) on Slated Boards,Manual Variable width, Little ware of theFen, Large Clearance, Manure Skims &Rear Discs, Depth WheelMore PhotosonrequestLocated Nr Spading Very Good Condition £5800 o.n.o. %$Robin$07831 886601
RS1565 2005 RABE 4+! FURROW
Free standing built on Substantial spline frame with side catchers to prevent roll off. Hydraulically driven. Will take Logs up to 3m long.Plus Rocking deck to assist feeding machine Good Condition
£3000 %$Shaun 07850$978188
S10588 RYTEC3PHASEPTO Free standing PTODrivepoweredby3 phase motor. Designed to replace atractor on stationary PTOdriven machine c\w cable.Appx4years old Very Good Condition£4000
%$Shaun 07850$978188
S10589 ECC52.5KVA 3phase
40KwGenerator skid mounted, poweredbyVolvoPentadiesel engine c\w fuel tank radiator etc.Plus control box. Startsand runs well Good Condition£2000
%$Shaun 07850$978188
24 ft Spread 4Spreading Discs (New), 2Horizontal Beeters Varial speed Conveyor,New Bearing This Year,Road Lights,Hydraulic Brakes, Well Maintainedready to go to work, MorePictureson Request LocatedNear Wisbech Very Good Condition £7500 o.n.o. %$Robin$07831 886601
RS1608 CASE MUCK FORK
1.75mt wide 8tinesindustrial H Dtype fork with Weld on Font loader brackets Good Condition £500 %$Robin$07831 886601
9Furrow ReversibleOnLand
Plough Fitted with DD Bodies Skims, Depth Wheels. Plough Metalall good No breaksor welds Cat3LinkageMany more picturesonrequestTransport can be arranged at cost to be agreed
Very Good Condition £5750o.n.o. %$Robin$07831 886601
RS1454 RABE 4FURROW SLATTED
5Furrow Plough on 14” Slatted Boards Variable width any Bolt 12” 14” !6” Depth Wheel, Manure Skims Plough MetalGood +New Sparewearing Parts MorePhotos on requestCan be delivered at pricetobeagreed Good Condition £4250 %$Robin$07831 886601 RS1592 KVERNLAND LM85
14inch 3+ 1AutoReset C/W ManureSkims And depth Wheel Plough metalall good, Location Bury St Edmonds, More photoson request Good Condition £3250 o.n.o %$Robin$07831 886601
5Furrow ReversiblePloughfitted with No.8Bodies. 300 ml under beam clearanceDepth Wheel& manureSkims.Plough Metal75% good. In use this autumn. Located Nr.Grantham. More. Photos on request Good Condition £2250 %$Robin$07831 886601
S10402 LEMKIN 110 VARIOPACK 28 Ring Furrow press c\w 30Degree rings appx9ft wide. Recently refurbishedpress c\w transport headstock suit 5x20 inch furrows Good Condition %$Shaun07850$978188
RS1636 ARTIC DOLLY
S10415 RANSOMES OVERUM 4F
Reversible plough, 36 inch point to point ad 29 under beam. Good Metal, Rear disc and steel depth wheel Good Condition %$Shaun 07850$978188
S10482 DOWDESWELL DP 2 6
Furrow Double Offset reversible upgraded touse with articulated tractors on Duals. This includes link arm extensions anddepth wheels on headstock. SCN bodies, Manureskims and scalloped rear discs. 3extrafurrowsavailable, one less some parts.Good 15/55 -17Depth tyre. Good Condition £2000 %$Shaun 07850$978188
S10515 RANSOMES TSR300
HD 6Furrow Reversible plough, (3 +1 +1+1 )14 ins UCN bodies, 34ins point to point, 27 inch under beam with trash boards. HD model with Rack &pinion turnover. Bracketsfor Discs butonly fittedtothe rear Furrow.Sound plough Good Condition £700 o.n.o. %$Shaun 07850$978188
S10549 RANSOMES TSR110 4
Furrow reversible plough with greased UCN bodies, Sword Landslides, ManureSkims & Depth wheel. Good Frogs. Plus Double coil Flexicoil Furrow pressc\w manual pressarm fitted. Good Condition %$Shaun 07850$978188
S10596 LEMKIN VARIOPACK 110 Double ring presswith8 of 30 degree rings plus 2spares ( 68 inch appx).FittedTransport headstock and rubber cleaning straps Good Condition %$Shaun 07850$978188
S10606 VOGEL AND NOOT6 FURROW Hydraulic variwidth plough with slattedbodies. Was OK butBeamisbrokenafter 2nd furrow.Repairs or spares AverageCondition Offers %$Shaun 07850$978188
S10625 RANSOMES TSR300S 2
Furrow hydraulically reversible plough fittedUCN bodies ( some Ransomes), manure skims and sprung bar points. AverageCondition %$Shaun 07850$978188
Potato HarvesterFully Reconditioned c/w 50mm Webs but35mm and 60 mm also part of the deal Hydraulic Power steering Low leveldischarge elevator, alovely clean machine ready to go to work, Reason for sale changeoffarming Policy, MorePicturesonrequest,Located Nr Bromsgrove,Staffs Very Good Condition £5600 o.n.o.
%$Robin$07831 886601
RS1481 2015 STANDEN STARLET FM2
TwoRow PotatoHulme pulveriser with Side Delivery Dischargein good working order,Located near Kings Lynn Very Good Condition
£2780 o.n.o. %$Robin$07831 886601
RS1517 STANDEN PEARSON 4X 36 POTATO PLANTER
Ridger Hood. Twin Planter Belts Stainless SteelOpenersTrack EradicatorsWideAluminium Loading Walk way, Chemical Applicator PerRow,Very clean Ready to go to Work’Many more picture on request Delivery canbearrangedLocated Nr Newmarket Very Good Condition £4250 o.n.o. %$Robin$07831 886601
S10562 KEYAG GRUSE 2Row cup planter c\w hydraulic tipfilling hopper and ridging bodies. Kept inside,good working order for itsage Good Condition £750 %$Shaun 07850$978188
POTATO /BULB GRADERS &EQUIPMENT
RS1387 RANSOM FAUN 2X 30 “ROWS C/Wexcellent Ridger BodiesNearly,New Tyres, Beautiful Little Planter.Ready to go to work Very Good Condition £650 %$Robin 07831$886601
WRI GHT SB ROK ER
RS1437 SQUIRE 120 TWIN GRADER
RS1580 2003 MASCHIO 3MTR
Potato grader Will Split Grade Bulk up to 20tons PerHr3 Phase electric Many Sparewebs Various Sizes, Sale due to Change of Farming Policy,Located Near Bromsgrove,Dry stored Good Condition £4600 %$Robin$07831 886601
S10432 1994 TONG 4F TCOIL Grading Module with Falt belt Feed conveyer.Mounted on Adjustable legs C\w 3 phase motor&cable Very Good Condition %$Shaun 07850$978188
S10476 HAITH BOXTIPPLER Free standing model, on legs appx 1m up in the air.Hydraulically operated will requirepower pack or tractortowork. Fitted side safetycages,suitable for standardton box1.2m by 0.9m. Good Condition £1700 %$Shaun 07850$978188
S10555 FARM ELECTRONICS DX / 4354 Ambient temperatureStore Chiller unit.. All In one topoutlet Easily installed presently in 75ft by 30ft store.Requires outside air access through 54 inch square vent. UntoBase bloweris8ft by 55 Inches7ft tall. C\w Controls all 3phase Good Condition %$Shaun 07850$978188
S10600 1997 TONG 1TON
BAGGER Fittedone 15 inch and one 4inch belt. Compressed air bag grips, 3phase electrics. Gold livery Good Condition %$Shaun 07850$978188
S10602 TONG BAGCONVEYER 8ftby12Ins wide with 12 Ins plywood sidesSuitable formoving bags or stitching Also 4FTby12ins wide roller conveyer formoving bags or boxes. Good Condition %$Shaun 07850$978188
S10622 NEWLONG NP 7 Hand held bag sewing machine,single phase (13amp) c\w string and tool kit. Shop soiled unused machine Excellent Condition £550 %$Shaun 07850$978188
POWER HARROWS
RS1359 LELYPOWER HARROW 3MTR COMBINATION DRILL Combination C/W rear PiggyBack linkage&RECOSulky Suffolk CoulterSeedDrill. With Reekie Following Harrow,Veryclean Machine Directfromfarm, ready to go to work, Can Be delivered at cost to be agreed. MorePhotos on request Very Good Condition £2750 o.n.o. %$Robin$07831 886601
PowerHarrowc/w Packer Roller, in good working order,Tines 75% good, Dry Stored Located Nr.Tonbridge, Kent,Morephotos on request. Transport canbe arranged Good Condition £4500
o.n.o. %$Robin$07831 886601
S10420 KVERNELAND 3M Power harrow,FittedHeavyduty1000 Rpm Gearboxwith 540 shaft. Good tines, few leaksand no packer or Crumbler.Spares or repairs Poor Condition £450
%$Shaun 07850$978188
S10421 RECO MASCHIO DM4000
4m Harrow C\w good bolt on tines, packer with hydraulic adjustment. 1000 Rpm through shaftgearbox.Faded paint
AverageCondition £850 %$Shaun 07850$978188
S10486 LELYEND TOW KIT Suit 4M Lely Roterra. C\w drawbar,2 Goodyear 10/80 -12tyres and brackets Good Condition Offers
%$Shaun 07850$978188
S10581 KUHN 3M PACKER Roller,Standardtype c\w fittings including scraper bar etc to go on powerharrow. Seen little use Very Good Condition £700
%$Shaun 07850$978188
SILOS &STORAGE
S10334 2010 GSI 500 TON
S10509 CRIT TALNESTOF28 3m panelled Squarebins. Joined in 2 paired runs of 7aside.Total 28 bins. 6Panels each 1m high per bin. One panel per bin has 20 by 22 ins access panel and 6ins hole foraeration tube (One per bin included )AFew Single phase 550 Wfans Good Condition %$Shaun 07850$978188
S10559 SHIPPING 40FT SteelHi Cube Containers, painted dark green, delivery by arrangement locally in Lincs Good Condition £2750 %$Shaun 07850$978188
SPRAYERS
RS1472 2020 AMERZONE UF 1501
Galvanised steel Round Bins 33ft diameter, 2of, 6sheetshigh c\w doorsand very good access steps Galvanise still bright. Should dismantle easily.2Morealittle older Excellent Condition Offers
%$Shaun 07850$978188
S10474 CENTRE DISCHARGE
Free standing open tophopper on legs appx2my1.5m. Fitted powereddischargeslide appx1m high and extension on top. Very Good Condition £5500 %$Shaun 07850$978188
S10475 CENTRE DISCHARGE
Open topped free standing hopper fittedpowered8 inch auger dischargeout of side Mounted on legs. Good Condition %$Shaun 07850$978188
S10479 FREE STANDING Centre dischargehoppersonlegs, galvanised steel one round, one corrugated. Appx5ton each. Kept inside Very Good Condition
%$Shaun07850$978188
S10485 DMC 120 TON Drying Silo appx 18ft Diameter&20 ft to eaves.Includesautomated transfers systemand Bental fan with LPG heater included.Fully reinforcedwith good galvanised panels. Good Condition %$Shaun 07850$978188
Tractorthree Point Mounted Sprayer C/W 20 Ft booms Mixing tank &Handwash, Ambset controls, Current 12 months Cert Reason forsale going Organic Notused lastyear. More pictures on request Excellent Condition £17500 %$Robin$07831 886601
RS1529 CHAVTRACK 24MT SPRAYBOOMS Self Propelled Sprayer,Perkins Engine,4Wheel Drive, 4Wheel Steer Running Gear is JCB Loadall, Flotation & Row Crop Wheels 2000lt Tank, Full Road lighting,Wash tank, Chemical induction unit Variable ratcontrol No Current Certificate LocatedNearOakham Rutland Good Condition £8500 o.n.o. %$Robin$07831 886601
RS1563 1993 FRASER AGRI BUGGY56
24 meterBooms, 5section Control;,RDS, Rowe Crop wheels, ready to go to work, Located Nr Melton Mowbray Very Good Condition £9250 o.n.o. %$Robin$07831 886601
Mounted 1000 litresprayer with hydraulic folding &lifting 12m booms fittedwithtriplexnozzle holderswithgood selection of nozzles. Plus induction bowl, washouttank and self cleaning filter.Handy sound sprayer Good Condition %$Shaun 07850$978188
SUBSOILERS
RS1453 TWB 7LEG
Cat2&3 ILinkage AllGood MetalPressureroller BrakeBack Legs,Location Newmarket,More picturesonrequest, transport canbearranged Good Condition £3750 %$Robin$07831 886601
RS1475 MASTEMBROKE
Single Legtrailed Mole Drain Hydraulic LiftWheels And SSLeg, In good working Order,Location Atherstone,Warks, morephotos on request Good Condition £1750 %$Robin$07831 886601
RS1556 FALMAC 5 LEG 3.5MT
HeavyDutySub Soiler C/W Heavy duty Packer Roller Readytogo to Work LocatedNrCrowland, Peterborough. Transport canbe arranged at cost to be agreed+ Good Condition £4000 o.n.o. %$Robin 07831$886601
RS1588 2014 CHALLENGER PHOENIX 3.00MT
5staggered Sub Soiler Legs onerow of Angling Discs followedBySteel.Road lights side RailsPressureRoller More photosonRequest LocatedNr Grantham Good Condition£7000 %$Robin$07831 886601
S10544 MOLE PLOUGH Beam type 3point linkagemounted to plough up to 1m deep C\w mole &expander on 16 inch by 1inch leg.Includessecondary skids for shallowerwork Good Condition £900 %$Shaun 07850$978188
TANKS
S10608 10,000 LITRES
Stainless SteelexMilktanker bowser,fitted Drawbar,Engine driven pump etc to use as spray bowser.Sound order as kept undercover when notinuse Good Condition £5750 %$Shaun 07850$978188
TRACTORS &EQUIPMENT
S10428 1991 RENAULT103 - 54 TRACTOR
S10629 2000 JOHN DEERE 6210 4wdTractor FittedJohn Deere 640A DriveinPowerloader with Joystick control. Powerquad gearboxwith Left hand reverser. Recent Topend overhaul. 320/85 R28 Fronts and14.9 R38 Rears 60%. Tidy useful Tractor Good Condition £17000 %$Shaun 07850$978188
S10630 1986 JOHN DEERE 2040 XE 2wdTractor around 6500 hoursfitted Lowprofile SG2 cab, 2speed PTO. 60% 16.9 -34Rearsand 10 -16 fronts. 2 Spools and Pick up hitch. Very Good Condition £7500 %$Shaun 07850$978188
TRAILERS
RS1478 BALE TRAILER MULTI FLAT8
S10465 WEST10TON Front loading Silagetrailers, Choiceof2 straight, readytogowith full sets of extensions, Auto rear doors with mesh panel etc.Walking beam axleswith 12.5/80 -15.3 tyres.Brakes& LEDlights Good Condition £4500 each %$Shaun 07850$978188
S10547 DOLLY ForMoving Artic trailersc\w 5th wheel coupling 9-/20 tyres on 8studbraked axle.Good Drawbar,suit yard work AverageCondition £450 h
%$Shaun 07850$978188
S10574 TYE 4TON HI TIP Trailer, Single axle axle trailer with good 12.5/80 -15.3 Tyreson6stud axle. Steel Floor and 4ftPlywood sides. Repaintedawhile back but still tidy Good Condition £1200
%$Shaun 07850$978188
VEHICLES/4x4
RS1524 DISCOVERYTYRES 25555 R20
4ofRoad Tyres50% Good, LocatedNrWinslow, Buck, £7500 Each ONO Good Condition £75 each %$Robin$07831 886601
S10429 LEYLAND 384 75 HP 2wdtractor in largely original condition except fornew radiator, Seat, brakes &steering.Runs well V5 available Good Condition £2800 %$Shaun 07850$978188
S10445 2015 JOHN DEERE LIF TRAMS 80mm Ex John Deere6120, supplied as high capacity butupgraded. Little used Excellent Condition %$Shaun 07850$978188
S10463 2013 WATKINS900 KGS Steel 3point linkageweight block forTractor front linkage mounting Very Good Condition £1500 %$Shaun07850$978188
S10488 INTERNATIONAL WEIGHTS .Setofrear wheel weightsfor IH or Ford tractor, roundtype Good Condition %$Shaun 07850$978188
S10524 ALLIS CHALMERS ROCROP Tractor, 2wdon80% 9 -24 Rearsand 4-15fronts. 3 Speed gearbox, PTO&Drawbar Good Bench seat. Designed with long bell housing for centrally mounted implements Good Condition %$Shaun 07850$978188
S10525 JOHN DEERE MODEL A 3Wheel Rocrop tractorFitted Electric start petrol engine.C\w with Drawbar,PTO and Stubs forlinkage.Long axleswith 11 -42rearsand 7-50-16 fronts Good Condition %$Shaun 07850$978188
S10556 JOHN DEERE 900 KGS Cast Iron Weight block to go on front linkage. Painted Black. Good Condition %$Shaun 07850$978188
Artic type Bale Trailer with stepped frame and Dolly on Super single Wheels, Located near Newmarket.Morephotos on request Very Good Condition £2750 %$Robin$07831 886601
RS1540 WARWICK 10 TON Grain
Trailer Drop Detachable Sides Manual rear door,Grain chute Road Lights &BrakesGoodall round General Ag Trailer Good Condition £4500 o.n.o. %$Robin 07831$886601
Lorry converted Grain Trailer Tandem Axle,Aluminium body, Drop ownsides, Manual Rear Door,grain Shute Road lights, Fold overTarp,Hydraulic Brakes DryStoredlocated Nr Crowland Good Condition £4500 %$Robin 07831$886601
RS1620 LOWLOADER PLANT TRAILER
S10592 SINGLE AXLE General purpose lorry conversion trailer 15ftlong steelbody with 3ft sides. 18 -19.5 Tyres. Average Condition £1250 %$Shaun 07850$978188
S10613 2014 BAILEY 18 TON Monocoque Triaxle trailer with steering second axle,hydraulic back door and Easy sheet. Plus Silagesidesifrequired Good Condition %$Shaun 07850$978188
S10614 2003 RICHARD WESTERN 12 TONROOT
Tandem Axle trailer on Super singlesfitted Sprung drawbar, hydraulic brakes andback door with grain chute.Front ladder Easy sheetand rack Good Condition £7000 %$Shaun 07850$978188
S10616 TEAMPORTTRIAXLE
Commercial 41 FT Flat trailer c\w hydraulic brakes on steel springs with 385/65 R22.5 Tyres. Timber floors, Side bars& Rubber mudguards Good Unbraked dolly if required. Choiceof2 AverageCondition %$Shaun 07850$978188
Hydraulic Rear Rampswith fold outSkids, Full Road Lighting and amber warning lights,Hydraulic Brakes, Twin Axle &Twin Wheels on 10 stud 8.2 XR16 Wheels Viewing,Recommended, More Photosonrequest LocatedNear Wisbech Good Condition £3250 o.n.o. %$Robin$07831 886601
S10462 HI LIF T 4Ton Trailer with double timber sidesappx 4ft.Single axle on 12.5/8015.3 tyres.Sound tidy trailer
Good Condition £1400 %$Shaun 07850$978188
Flat tandem axle 3500 KGstrailer with Galvanised chassis, Good Floor tidy order Good Condition
£1750 %$Shaun 07850$978188
S10623 1988 BAILEY 11 TON
Monocoque trailer on walking beam axlesfitted with 385/65 R22.5 Tyreson8studhubs. Swinging back door with grain chute,Front ladder and small window. AverageCondition %$Shaun 07850$978188
S10635 BAILEY TB 18 Monocoque trailer on Floatation tyres with steering back axle and hydraulic back door plus easy sheet. Only used forgrain Very Good Condition £19000 %$Shaun 07850$978188
TwoHorse Box2.1Ltr Diesel converted by AscotHorseboxes in 2017, Dry Stored, only 3000 milesfromnew Full service history 12 months MOT. Sat Nav,Internal cameraGas ring, Mini Fridge, Sink, Wardrobe, Single bunk over cabin. Twin tack Lockers+ Gas &water Locker Morephotosonrequest LocatedNearBostonLincs Excellent Condition £27000 %$Robin$07831 886601
S10494 2002 ISUZU TROOPER CITATION SWBAutomatic 3.0 D Engine.Green Livery with grey velour haetedfront seatsCurrent MOT. FittedSteel wheels with 245/70 R16tyres 70%. AndTow bar AverageCondition %$Shaun 07850$978188
S10520 MITSUBISHI HARDTOP CANOPY To suit 2006 -2014 L200 Animal pick up body All Glassincluding rear lifting windowand sliding side & front window. Painted Black AverageCondition £250 %$Shaun 07850$978188
S10527 LANDROVER SWB Petrol Series2with Hard& Canvas tops ,Towbar and new7.50 -16 Tyres. Good all round condition. Very Good Condition £17000 %$Shaun 07850$978188
S10611 HONDATRX 300 QUAD BIKE ,4wdwith Electric start. Lightuse by current owner Good Condition %$Shaun 07850$978188
S10632 2015 FORD RANGER LIMITED Limited 6speed manual 2..2 diesel in metallic blue with leather interior,loadcoverand tow bar.Only68047 miles. Cat N. Tidy Truck Good Condition £10500 plus VAT %$Shaun 07850$978188
S10633 2020 JOHN DEERE XUV 865MGAITOR 4wdOff Road buggy with tipping body,full cabwith doorsand bull barsall round.One owner from newonly done 17,219 miles in 1158 hours use Very Good Condition £16500 %$Shaun 07850$978188
• Meet new customers and showcase new products and services
• Manufacturers and the region’s top dealers attending
• Network with potential new clients and suppliers
• Support and promote farming in the South of England to a wider audience
BROUGHT TO YOU BY:
AUCTION SPONSOR: SHOW SPONSORS:
ON THESE PAGES
2017, £52,950. 50kph, air brakes, exhaust brake, front linkage & PTO, front bar axle & cab suspension, leather seat, hydraulic top link, electric mirrors, 650/65R38 rears – 90% good & 540/65R28 fronts – 30% good, LED lights, autosteer ready & tidy with 4,173 hours
TEL: 01769 550500, GS Brown
JOHN DEERE 6130M AUTOQUAD
2018, £52,950. c/w JD 623R loader (multi-dock, Eurohead, 3rd scv), TLS front axle & cab suspension, air brakes, 3 speed PTO, passenger seat, air con, sun roof, Firestone 460/85R38 & 420/85R24 tyres – 40% good, only 2,961 hours & smart
TEL: 01769 550500, GS Brown
FLEMING GENERAL PURPOSE GRAB
£1,895. New in stock, 820mm1,246mm opening, 15 tines, 2 hydraulic cylinders for powerful grip and low horsepower requirements, c/w Euro brackets. Shop soiled so discounted price
TEL: 01233 732439, Kent Tractors
£POA. AV 2.105 L
TEL: 01622 843013 Kirkland UK
NEW FLEMING TR10 TIPPING
TRAILER 10 TON
£12,000. Twin sprung axles, c/w dropsides, hydraulic brakes, high tip, lights, double height extension sides available which are fully detachable so can carry hay. 14ft3” x 7ft2” X 2ft. This can include delivery if you can unload and facilitate an artic.
Options: With low sides £12,000. With double height sides £14,000. Also available mono fixed sides
TEL: 01233 732439, Kent Tractors
KUBOTA B3030 COMPACT TRACTOR
Approx 2013, £12,750. 4x4, 30hp, only 973 hours, pas, c/w air con, hydrostatic gearbox, grassland wheels and tyres, rear and mid mounted pto, very nice example
TEL: 01233 732439, Kent Tractors
NEW HOLLAND T4050N FRUIT TRACTOR
2012, £16,275. 4x4, 95hp, 7907 hours, pas, c/w blue cab, forward/ reverse shuttle, air con, super steer front axle, front linkage and pto, 1 owner, regularly serviced and Maintained by Haynes
TEL: 01233 732439, Kent Tractors
MANITOU MLT 630-115 V
2022, £POA. 3350 hours ,2 speed hydrostatic transmission, full Elite spec, hydraulic locking hydraulic pickup hitch, boom suspension, air conditioning, air seat, camera kit, ECS (easy connect system), reverse fan Manitou headstock, new tyres, pallet forks, immaculate condition, three month warranty
TEL: 01803 863400, R & D Machinery
FENDT 828
2021, £125,000. Profi Plus Transmission, 65Kph, Vario transmission. 280hp, 4 closed centre Spools. Front tyres: 600/70 R30 (30%) Trelleborg. Rear tyres: 710/70 R42 (30%) Trelleborg. Hydraulic rear top link,Front suspension,Cab suspension. Air conditioning, Guidance ready, Telemetry ready, Air brakes. Front linkage, Powerbeyond, Front spool. 540E/1000 Rear PTO speeds. Balance of manufacturer's warranty: upto 6000hrs. Warranty until: 30/06/2025 TEL: 01476 590077, Chandlers Farm Equipment
£10,950. Round Baler TEL: 01622 873331, Morgan Machinery World Tractors JOHN DEERE 6140M
£77,950. 40KPH Autoquad. Suspended axle. Suspended cab. 3 spools. 3 speed rear pto. Air/hydraulic trailer brakes & abs socket. Air conditioned cab with glass hatch roof. Premium air seat. Passenger seat. TEL: 01622 873331, Morgan Machinery World Tractors
CASE PUMA CVX 240
2003, £POA. 750 hours, front linkage & PTO, 4 rear spools, 1 front spool, reverse fan, AC, air seat, air brakes, exhaust brake, heated electric mirrors, LED work lights, high level lights, twin beacons, hydraulic top link, power beyond, ISOBUS, guide ready, 710/70R38 & 600/65R28 Trelleborg
TEL: 01761 490372, H Curtis & Sons
ANTONIO CARRARO A SERIES
HORSCH PRONTO 6 DRILL
VIEW LOTS OF BARGAINS FROM THE TRADE ONLINE NOW AT www.farmmachinerybuyer.com
2018, £POA. 6099 hours, front linkage & PTO, 4 spools, AC, air seat, air brakes, LED work lights, twin beacons, hydraulic top link, power beyond, Autoguide ready, 710/60R42 & 600/60R30 Michelin
2023, £79,000. 738 hours. 165hp/210kw. Range Command
TEL: 01865 880866, CFS
CLAAS ARION 650
£33,000. 6,288 Hours
TEL: 01935 841307, Graham Holland
JCB
TELEHANDLER
FREE FARM ADS
WAYS TO SUBMIT YOUR FREE LISTING
TRACTORS
MASSEY FERGUSON 135
1973, £7,000. In fantastic condition. Recently refurbished to original spec with TLC (re painted along with new decals). Fitted new wiring loom on with new front grill and new headlights. Brand new dials on the dash fitted. Brand new exhaust fitted (old one had seen better days). Always starts on the key ignition and operates faultlessly with no oil leaks. Tyres in almost a new condition. Looking for £7,000, feel free to message me to arrange viewing. Only selling due to premises relocation and therefore not needed. Sad to see the old girl go.
TEL: 07725 003844, Kent 565
LEYLAND 154
£500. With Low Ground Pressure Rear Wheels. Non runner. 3600 hours on clock. Developed a fuel issue 10 years ago, and has been parked in a barn since then. 12 ply 22-20 low ground pressure wheels fitted to rear. Sensible offers only please.
1. ONLINE
ENVELOPE MOUSE-POINTER
If you are already a registered user, please
TEL: 07973 824423, Mayfield, East Sussex 608 2.
ISEKI 2160
£2,500 No VAT. 4x4 compact tractor 21hp cash on collection
TEL: 07989 175121, Buckinghamshire 438
MASSEY FERGUSON 165
1967, £11,500 +VAT. Fully engine rebuild only done 2hrs since Original panels After fit 2 way acting spool valve Road registered. Only selling due to not needed any more
TEL: Charlie 07753 381718, Near
Ashford, Kent 529
FEATURED LISTING
MASSEY FERGUSON 3080 AUTOTRONIC
1991, £4,500 Open to offers. Gearbox and four-wheel-drive not working, has been on our Farm since 2005 and was working up until last week. Good condition for its age, 11,000 hours, new tyre on the back right, back left tyre is 80%, Front tyres are 60%, just had a new clutch at the end of 2023.
TEL: 07950 244459, Surrey 642
1969, £5,000. Restored a few years ago little used since. Very tidy tractor. TEL: 07764 318441, West Midlands
£5,000. In excellent working order. New tyres, clutch, and battery. Complete with David Brown power loader. Owner retiring due to ill health. TEL: 07776 210671, West Midlands 123564
TEL: 07855
07855
FORD 3000
DAVID BROWN 1210
POA. Original demonstrator. Only a couple none left in world running.
399487, South West. 123852
JOHN DEERE D
POA. Running. TEL:
399487, South West. 123844
FERGUSON 165
1965, POA. Mk1 registered Jan 1965 one of the first! Been parked up for many years but runs, drives and hydraulics work. Winsam cab fitted. Hi- lo selector lever partially seized from standing. Early model, V5 present and Original operators Handbook. Not messed with. Restore or oily rag restoration, you choose! Original Massey Operators manual that came with tractor included. Serious offers before it goes to auction. Please call 07900339304, Wales.
MASSEY FERGUSON 35
1961, POA. With loader and bucket and topper in full working order.
TEL: 01380 816253, South West.
1966, £7000. Fully restored, nut and bolt. Very tidy example. Recent service. New tires. Been dry stored.
TEL: 07907 923271, South East.
MASSEY FERGUSON 35
POA. Petrol/tvo, a good working example.
TEL: 07821 184799, South West.
HART 134
POA. Copy of Doe 130 made in NSW by Hart Brother. About 200 made, one other in existence. New pump for turntable otherwise very original.
TEL: 01787 461308, East of England.
123684
MASSEY FERGUSON 148
1975, £12,400. Rarer and much sought after larger version of MF135. Fully overhauled including rebuilt engine. Extensive list of new parts and work done. New tyres all round. Now in show condition. Auto PUH. 8 - speed.
V5C. Delivery possible.
TEL: 07970 918811, South East. 123854
MASSEY FERGUSON 1080
£8,000. Multipower in good original condition.
TEL: 07536 975561, South West.
123774
MASSEY FERGUSON 135
1969, £4,250. Runs, but noisy and ready for restoration. Good brakes.
P.T.O and hydraulics work. Supplied by Browns of Leighton Buzzard.
TEL: 07813 606669, East of England.
124010
1944, £2,500. Starts and runs well. Needs some cosmetic attention. Selling due to change in circumstances.
TEL: 07902 460704, South Oxfordshire 124221
TELEHANDLERS
CLAAS SCORPION 7055
2014, £28,000 +VAT. 7m reach, 5.5 ton lift capacity, 9554 hours. Boom float. LED lights. CLAAS headstock + two new spare tyres. Regularly serviced by dealer. Current LOLER certificate. Clean machine for the amount of hours. Pick up hitch. Trailer tipping couplings. More photos available on request. Sold as seen
TEL: 01843 847307, Kent 516
COMBINES
JOHN DEERE 1177 COMBINE
1992, POA. The combine has not been used for 10 years, but periodically started. Has new parts in it. Ideal for spares. Open to discuss price.
TEL: 07973 387509, Kent 582
MASSEY
CASE DC4
www.farmmachinerybuyer.com
FARM MACHINERY
Kelsey Media, The Granary, Downs Court, Yalding Hill, Yalding, Maidstone, Kent, ME18 6AL 01959 541444
Kelsey Media takes your personal data very seriously. For more information on our privacy policy, please visit www.kelsey.co.uk/privacy-policy/ If at any point you have any queries regarding Kelsey’s data policy you can email our Data Protection Officer at dpo@kelsey.co.uk
FREE FARM ADS
WHEELS & TYRES
2X USED / PART WORN JCB
3CX REAR TYRES
£20 +VAT. Size 480/80-26 (18.4-26) Used but with some tread on them. Buyer to collect
TEL: 07973 493846, Carshalton, Surrey 549
650/65R38 TRACTOR TYRE
POA. 650/65r38 Taurus tractor tyre as new
TEL: 07710 872115, East Kent
LGP WHEELS AND TYRES
£500. 4 LGP wheels and tyres for Bateman sprayer
TEL: 07540112209, Kent 575
GOODYEAR 12.4 R24 TYRES
£50 the lot. Pair, well worn but sound with matching air tight inner tubes
TEL: 07785 330632, East Sussex 646
INTERNATIONAL WHEELS
£150. Pair of International wheels only for tyre 14-28
TEL: 07860 366802, Kent 457
PAIR OF WHEELS
£200. Wheels from Ford 4610 to take 12. 4- 11x 36 Tyres. Buyer to collect TEL: 07860 366802, Kent 568
TYRES
£40 +VAT. 2 Tyres 13.6/65-18
TEL: 07762 713003, North Kent. 496
TYRES
£40 +VAT. 2 Tyres 11.5/80 - 15.3
TEL: 07762 713003, North Kent. 498
WANTED
Tractors, Diggers, Farm Clearances and Agricultural Machinery
35 Years experience. Professional service. Immediate valuation, payment & collection. Tel: Andrew Hooker 01233 732439
£750 No VAT. Full working order, very little used, 12" auger, suit tractor 35Hp upwards. Sale due to retirement.
TEL: 01797 260392, Rye 554
2 TEAK GARDEN BENCHES
£180. Two Teak Garden Benches in good sound condition. One bench has a brass plaque stating 'Made from the Teak of HMS TERRIBLE whose guns relieved Ladysmith'. £180 the pair or £100 for bench with plaque and £90 for the other. Cash on collection in person.
TEL: Keith 01483 275415, near Cranleigh, Surrey 610
£20 each or all 3 for £50. All in working order, used last winter. May be some gas left in cylinders TEL: 07973 824423, Mayfield, East Sussex 629
AVERY WEIGHING SCALES
£30 ovno. Electric weighing scales suitable for weight from a few grams to several kilos. Very accurate with clear LED display. In good working order. Buyer collects.
TEL: 07788 720484, West Kent 533
£180. Viewing welcome TEL: Martin: 07885 306055 please phone (no texts), Ashford, Kent 601
www.kelsey.co.uk
3 GAS FIRED PATIO HEATERS
ANVIL
WAYS TO SUBMIT YOUR FREE LISTING
£15. Various sizes
TEL: 07748 840049, no text messages 367
BATESON 12FT LIVESTOCK TRAILER
2005, £2,200. With internal division
TEL: 07899 892513, Hampshire 548
BLACKSMITHS TOOLS
£8 each. Quantity of blacksmiths tools. Viewing welcome
TEL: Martin 07885 306055, (please phone - NO TEXTS), Ashford, Kent 597
CHESTNUT FENCING STAKES POA. Mixed halves and quarters. 10/12cm tops. National delivery available. TEL: 079852 98221 www.cwpfencing.co.uk. 632
£110. Galvanised double corn bin, very good condition TEL: 07748 840049 no text messages, Maidstone area 586
COUNTRY WINE MAKING EQUIPMENT
£75 No VAT. 13x 1 gallon clear glass demijohns, 3x large plastic fermentation tubs, 1x small plastic fermentation tub, 1x large fermenting bucket, 1x large green glass flagon, box of assorted wine making items - bubblers, corks, hygrometer etc (not pictured).
TEL: 01797 260392, Rye 556
INSTANT
2. EMAIL
Send your listing to fmfreead@kelseyclassifieds.co.uk
Make sure to include your contact details
CHILTON SN 5639 TOPPER
1999, £1,500 ovno. Sat in barn last few years, surplus to requirements
TEL: 01276 858028, Surrey 519
CROWN 'ALWAYS ORCHID' PAINT
£6. Matt 2.5 litres Opened, but now surplus to requirements.. TEL: 07510 139126, East Sussex 589
DEHORNER
£150. Calf dehorner crate, good floor
TEL: 07885 802069, Kent/Surrey border 636
MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
DIESEL TANK
£150. 2500 litre diesel tank, non bonded, good condition TEL: 07785 330632, East Sussex. 553
DOSATRON FERTIGATION SYSTEM
£100. Purchased about 5 years ago and little used, this fertigation system connects to your irrigation system to allow you to deliver nutrients in a controlled way to your crop. ovno.
TEL: 07788 720484, Kent 532
FREE FARM ADS ONLINE
DUTCH BARN
UPGRADE
YOUR LISTING
BRONZE
Your listing will appear in the magazine and online a week after publishing in print.
£6,500 ovno. 60' x 24' ex. Dutch barn of 4 bays of 15' with 3/4 mezzanine, 15' to eaves with concertina full height/ width sliding door and cement/fibre 'big six' roofing sheets with 'Z' purlins. All round box profile and corrugated steel sheets as cladding. Substantial steel stairs to first floor. Large front/rear windows and dressed wall blocks (front only) available. Complete, dismantled and ready for sale. Ideal workshop or machinery store Loading facilities available.
TEL: 07731 894929, Stafford, Staffordshire 543
FANTINI ORCHARD SPRAYER
FEEDING GATES AND TROUGHS
£550 each. 3x 15ft feeding gates and troughs for fitting to barns
TEL: 07802 725876, Deal, Kent 561
FERGUSON MIL LOADER
FORKLIFT TIP SKIP
£180. Viewing welcome TEL: Martin 07885 306055 please phone (no texts), Ashford, Kent. 599
GATES
GRAYS ROLLER
£900 +VAT. Water filled. 8' x 30"
TEL: 07762 713003, North Kent.
503
HOTPOINT 60CM DOUBLE ELECTRIC OVEN GRAPHITE 2019, £200 ovno. Brand new and unused, still in original packaging.
Buyer collects TEL: 07788 720484, East Malling, North West, Kent
£550 No VAT. Came off 1952 Ferguson Ted 20 but would probably fit most Fergies. Been rubbed down and repainted in two coats of red oxide primer and stored under a tarp since. Comes with a bucket, but the bucket does need a new bottom. Cash on collection.
TEL: Oliver 01892 722021, Near Tunbridge Wells or oliver.d.playfoot@gmail.com 537
£475. Pair of gates with posts, 16ft opening, 8ft high. TEL: 07748 840049 no text messages, Maidstone area 584
GATES
520
HAY RACK WITH LEGS
For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly.
SILVER GOLD
For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*.
*Allow up to 3 days for processing.
£500 +VAT. Reliable orchard sprayer. Fantini are known for their good design and reliability. Has not been used in recent years so has plenty of work life left in it. Has been well cared for and kept under cover. This item is missing a PTO shaft. Location West Kent. Buyer collect TEL: 07788 7820484, Kent 536
FARM GATE
£40. Heavy duty farm gate 10ft
TEL: 07912 599750, Kent 456
FLEMING FERTILISER SPREADER
FOOTBATH
£200. Large cow footbath. TEL: 07885 802069, Kent/Surrey border 634
2017, £7,250 +VAT. 17 plate. Auto reset. LED lights. 4 legs. Harden Faced Cutting discs. Soil scrapers. Grass harrow for rear. Adjustable leg depth. In very good condition.
TEL: Charlie 07753 381718, Near Ashford, Kent 523
£400 No VAT. Nearly new; little used; ideal for fertiliser, grass seed and similar. TEL: 01797 260392, Rye 555 MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
£165. 8ft hay rack with height adjustable legs, galvanised, no rust.
TEL: 07387 587387, Surrey
640
HOLLOW BREEZE BLOCKS
£3 each. The Blocks formed part of an internal wall, so have some sandy mix cement on them £3 each
TEL: 07510 139126, East Sussex 594
HONDA GENERATOR
£100 +VAT. TEL: 07762 713003, North Kent. 579
HYSTER P2.0L ELECTRIC PALLET TRUCK
£150. In working order
TEL: 07703 595330, North Kent
550
ANIMALS FOR SALE
CHAROLAIS RAMS
POA. Shearling rams from Weeksland flock, M.V.accredited and performance recorded. All above average, bred for meat production not showing.
Available from farm and local market ram sales.
TEL: 07775 844586, Kent 571
CHAROLLAIS EWE TEGS
POA. Available due to flock reduction, 7 pedigree ewe tegs from Weeksland flock. M.V. accredited and performance recorded. Will be sold at Dolphin Sheep Fair, 19th Sept.
£800. 9 weeks old. Bred for good nose and brains. Parents from our own working lines. Legally docked, de-clawed and chipped. A pup not to be missed! Reduced in price due to time-waster.
TEL: Carl 07495 517602, Ramsgate, Kent
647
POINT OF LAY HYBRID PULLETS
POA. Various breeds and colours including Black Rock, Light Sussex, discount for quantity
TEL: 01795 532848 / 07759 320496, Faversham, Kent 630
PEDIGREE POLLED HEREFORD BULLS
POA. Top quality, quiet, easy calving bulls with good structure, high carcase values and rapid growth rates. From low risk TB area. All bulls scanned, weight recorded and blood tested for IBR, BVD, Lepto and Johnes. BVD vaccinated. HCS Superior carcase sires, all bulls qualify for meat scheme premiums.
TEL: 01243 262252 or 07881 944394, West Sussex. 631
POL HYBRID PULLETS
£18 each. Viewing welcome TEL: Martin 07885 306055 please phone (no texts), Ashford, Kent 598
SHEARLING RAMS
POA. Pure Texel / Pure Charollais / Pure Beltex Texel x Beltex / Charollais x Beltex
All on Heptivac P system Not pushed Working rams from good bloodlines
TEL: 01580 831951 / 07837 744415, East Sussex 552
PUREBRED CHICKSRHODE ISLAND RED
From £8 each. Viewing welcome
TEL: Martin 07885 306055 please phone (no texts), Ashford, Kent.
600
TEESWATER X LLYEN SHEARLING RAM
£150 ono. Good temperament shearling ram ready for work this autumn. Wormed and ectofly.
TEL: 07791 958335, Haywards Heath 564
TURKEYS
£30 each. Kelly Bronze and Plumpy White. 11 weeks old on 1st September Kelly Bronze Turkeys. All outside during the day and In very good health. From 1st September. Over 100 available. Just outside Canterbury, Kent.
TEL: 07999 516664 538
DONKEY WANTED
Wanted. Bugsy needs a companion. If you have a Donkey that needs a friend, we have a home waiting with Bugsy.
TEL: 07530 972607, Kent 181
WYAGO X BULL
£950. Also pure bred bull not registered about 15 months.
TEL: 01233733285 / 07907 694004
567
WELL GROWN SUFFOLK SHEARLING EWES
£185. Suffolk and Suffolk cross shearling ewes for sale. All Heptavac P, wormed regularly and Caro etc treated. Very easy to handle
TEL: 01342 823328 or text
07460 928952, East Sussex 521
HOW TO SPOT A SCAM ADVERT
MOOOVE YOUR ANIMALS TO A NEW HOME WITH FARM MACHINERY
CAUTION
We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.
1. SPEAK TO THE FARMER
Always look into whether an advertiser appears legitimate.
2. VIEW THE ITEM If you can, view the item on the farm first.
3. AVOID ERRORS
Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.
5. NEVER PAY IN ADVANCE
Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.
6. PAYMENT
Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.
Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.
On behalf of Chilton Down Farm Partnership & Moor Court Farms Limited (change of farm policy) Genuine Dispersal of 2 Combines, 8 Tractors, 2 Telehandlers, Land Rover, ATV, Arable Machinery, Workshop Equipment, etc.
Online bidding available through symondsandsampson.co.uk Contact Greg Ridout: 01935
&
PRESTON ON WYE, HEREFORD, HR2 9JU
Dispersal sale of the private collection of the late F J Williams TRACTORS, CRAWLERS, IMPLEMENTS, SPARES WOODWORKING MACHINERY ETC
THURSDAY 29TH AUGUST
HAZLE MEADOWS AUCTION CENTRE, LEDBURY, HR8 2LP
Dispersal sale of private collections of 40 VINTAGE AND CLASSIC TRACTORS, CRAWLERS, IMPLEMENTS, MASSEY FERGUSON AND OTHER LITERATURE.
SATURDAY 31ST AUGUST
CHIDDINGSTONE HOATH, EDENBRIDGE, KENT, TN8 7DE
Dispersal sale for Brodie Ross Thompson Hall CLASSIC TRACTORS, TIMBER WAGON, IMPLEMENTS, DIGGER, TOOLS.
WEDNESDAY 18TH SEPTEMBER
Some
Register for your free account. For existing users, please reset your password
IFOR WILLIAMS 2 HORSE TRAILER HB505R
£2,750 No VAT. Spare tyre and partition. 4 New Tyres. Serviced very clean barn stored
TEL: 07761 490708, Hampshire. 569
£8. With glass partiitons.
TEL: 07510 139126, East Sussex 591
2001, £1,900 No VAT. 7.5 ton box lorry c/w tail lift in working order suitable for export.
TEL: 07540 112209, Kent 574
JPM 20T HALF PIPE
2023, £17,995 +VAT. 23 Plate. Air Brakes. Full LED Lights. Hydraulic rear door. Transcover roll over sheet, fully hydraulic Sprung Drawbar. Like New Flotation tyres Based
TEL: Charlie 07753 381718, Near Ashford, Kent 528
KING SPAN INSULATION CLADDING PANELS
£30 each. Used, 7m long, x 115 thick, x 1,015 wide. 50 available. White underside, grey outside, ideal dividing walls or cold storage room.
£200. Ideal for heating a workshop, but could go inside. Gives out a lot of heat, but very economical. Oil tank available separately.
TEL: . 07973 824423, Mayfield, East Sussex 627
KOMATSU PC40
KILWORTH TRACTOR MOUNTED FORKLIFT
2018, £950. Kilworth 9DCL fruit/vineyard forklift, excellent condition, with sideshif
TEL: 07444 621694, Ashford, Kent 607
KONGSKILDE CULTIVATOR
£100 +VAT. 11' wide Good condition
KUHN FERTILISER SPREADER
£250 +VAT. TEL: 07762 713003, North Kent. 501
KUHN HAYBOB 300
2014, £1,950 +VAT. Fantastic condition, Kuhn Haybob 300. Direct from farm, stored indoors and has been highly valuable helping with my hay making this year but is now surplus to requirements. All tines present & in the correct sequence, original operators handbook included. Can load.
TEL: 07786 117094 540 MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
TEL: 01892 723895 / 07980 585307, Brenchley 614
£5,250. 4 Ton Mini digger complete with 4 Buckets
TEL: 07860 366802, Kent 461
TEL: 07762 713003, North Kent. 504
MISSED THE DEADLINE? INSTANT LISTING AVAILABLE MISSED THE DEADLINE? INSTANT LISTING AVAILABLE
INTERNAL GLASS DOOR
IVECO CARGO
KEROSENE BURNING STOVE
KUHN MOWER
2001, £3,000. Kuhn mower used for haylage last month, needs a tidy on end drum but still works well, collection only TEL: 07989 175121, Buckinghamshire 609
KVERLAND RAKE 9030
2012, £2,350 +VAT. Used this season, just too big for my operation. Will keep if this doesn’t sell. Well maintained, ready to go to work. Can load this end.
TEL: 07786 117094 539
LGP SPRAYER
£1,800 +VAT. Sprayranger sprayer 1500l tank, 12/18m booms. Land Rover 200tdi engine and gearbox. 2 sets of wheels ,4wd 4ws.Indction hopper ,clean water tank. lightweight machine.
TEL: 07889 032695 Maidstone, Kent 557
LAND ROVER DEFENDER 110 TDS PICK UP
2002, £11,000 +VAT. 128,000 miles
TEL: Dave 07913 722085, Kent 603
FEATURED LISTING
SHEPHERD'S HUT
£1,200. Wooden shepherds hut with wheels. 3.8m long, 2m wide. Great project TEL: 07976 597224, Hampshire 518
LAND ROVER DEFENDER TDCI HIGH CAPACITY PICKUP
2011, £21,500 +VAT. One owner, 49900 miles, very good condition
TEL: 01273 890712, East Sussex 541
LEG VICE
£30. Viewing welcome TEL: Martin 07885 306055, (please phone - NO TEXTS), Ashford, Kent 596
LIVESTOCK TRAILER
£735. Ifor Williams P6 trailer, ideal for pigs/sheep/goats
TEL: 07748 840049 no text messages, Maidstone area 585
LIVESTOCK TRAILER
£3,250. 30ft trailer with 28ft body with sheep decks, hydraulic ramp, excellent brakes and lights. In full time use
POA. To rent on small holding 1 bedroom unfurnished but furniture negotiable by out going tenant.
TEL: 01233 733285 or 07907 694004, Ashford, Kent area 566
LOADING RAMP
£100. Loading ramps to fit an Ifor Williams DP120 livestock trailer
TEL: 07798 631567 or 07444 621694, near Ashford, Kent 606
MANHOLE COVERS
£15. Various heavy duty road grade manhole covers
TEL: 07748 840049 no text messages 369
MCCONNEL 4FT TOPPER
£675, sensible offers considered. Brand new PTO shaft. Deck previously repaired and repainted. Reluctantly selling as bought for use with my grey Fergie but discovered it was incompatible (Fergie does not have the required position control). Cash on collection
TEL: 01892 722021 Mon to Sat (no later than 9pm please) 560
MODULA OFFICE BUILDING 20X16FT
£12,000 +VAT. 2 doors and shutters on all windows In good condition .Fully water tight.
TEL: Charlie 07753 381718, Near Ashford, Kent 558
NEW HOLLAND FAN WEIGHTS
£995 +VAT. 18 x 45kg Weights
TEL: Charlie 07753 381718, Near Ashford, Kent 531
NEW KAWASAKI QUAD
2024, £1,500, offers considered.. Only done 5km. Hydraulic brakes front and rear. Racks front and rear. 250cc engine. Forward and reverse gears.
TEL: 07889 685310, Staffordshire 530
OIL TANK
£400. 2,500 Litre oil tank. Excellent condition. Has been removed as replaced with Air Source Heat Pump.
TEL: 07801 454818, Aylesbury 522
PARMITER POST RAMMER
£500 +VAT. GWO
TEL: 07762 713003, North Kent. 577
PEOPLE CARRIER TRAILER
£800 ovno. Ideal beaters trailer seats approx 18 people. Would need minor work to be road legal.
TEL: 07973 824423, Mayfield, East Sussex 628
POLMAC CHEMICAL MIXER WITH STAND
£50 ovno. This induction unit is unused and comes with full instruction booklet. Designed for safe induction of chemicals into a spraying tank. Buyer collects
3. SELECT YOUR PACKAGE Choose Bronze, Silver or Gold and click submit listing now
4. FILL OUT THE FORM FIELDS
5. SUBMIT LISTING
For paid listing, submit payment details to complete the process. For free listing click "SUBMIT LISTING" to complete the process.
6. MY LISTINGS
You will find your listings here once submitted: Scheduled – Your listing has been processed and is waiting to go in the magazine before going live Pending – Your listing is waiting to be processed Expired – Your listing has come to the end of it's month online.
TEL: 07885 802069, Kent/Surrey border 638
PROPANE GAS HEATER
£20 +VAT. Propane Gas heater with 2 burners
TEL: 07762 713003, North Kent 581
RAILWAY SLEEPERS
£40 each. Used grade A sleepers
TEL: 01892 723895 / 07980 585307, Brenchley 616
RHINO POST HOLE BORER
£695. Rhino HPHD PTO Post Hole Borer tractor mounted, heavy duty, viewing welcome, TEL: 07444 621694, Ashford, Kent. 605
SPRINGTINE CULTIVATOR
STEEL ROAD PLATE
£375 each. 8 X 4 steel road plate, 10 available.
TEL: 01892 723895 / 07980 585307, Brenchley
620
SECTIONAL RUN
£220. Sectional poultry run 8’6 x 9’6, complete with roof. Viewing welcome
TEL: Martin 07885 306055, Ashford, Kent please phoneNO TEXTS.
595
SHEEP TROUGHS
£35 each. x2 galvanised 6ft sheep troughs
TEL: 07748 840049 no text messages, Maidstone area 587
SHELBOURNE REYNOLDS 300 CUBICAL BEDDER
2020, £4,000 +VAT. Used twice only
TEL: 07402 031199, Billingshurst. 559
£600 No VAT. New hydraulic pipework and rams recently added
You can edit your listing once it has been processed. Once your listing has expired you can re-list. WANTED 4x4s, Trucks, Vans, Lorries, Diggers, Dumpers, Tractors, Forklifts, Generators, Ifor Williams Trailers Good or bad Call Ken on: 07708 786366 or 01233 720725 Email: kenperkins@hotmail.co.uk
TEAGLE SUPER TED TEDDER
£40. Set of blades for 8ft Teagle Topper TEL: 07860 366802, Kent 458
TIPPING TRAILER
£100. 7ft wide, used condition.
TEL: 01580 850925, East Sussex. 551
2005, £1,500.
TEL: 07402 031199 Billingshurst 510
1950, £200. This was hanging outside the Dick Turpin pub. This would look great at the bottom of a Farm access road. The frame is of wrought-iron and is very heavy buyer to collect. The spade and broom are to show the size, the dimensions are; overall length 253cm; frame 148cm x 113cm; post splay59cm x 19.5cm measurements are +/-.
TEL: 07534 842366, Essex 535
£500 +VAT. 14 cubic yd Suitable for soil or hardcore. TEL: 07762 713003, North Kent 578
SILAGE GRAB
TIP BINS
FREE FARM ADS ONLINE
HOW TO SPOT A SCAM ADVERT
CAUTION
We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.
1. SPEAK TO THE FARMER
Always look into whether an advertiser appears legitimate.
2. VIEW THE ITEM
If you can, view the item on the farm first.
3. AVOID ERRORS
Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.
5. NEVER PAY IN ADVANCE
Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.
6. PAYMENT
Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.
Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.
TOWING DOLLY
£350. c/w 6 wheels and tyres TEL: 07710 872115, Kent 573 USED TELEGRAPH POLES
£25 +VAT. 250 Yellow Bricks TEL: 07762 713003, North Kent 576
CLAAS DISCO MOWER
£2,000 +VAT. 2.5 metre cut Good condition TEL: 07762 713003, North Kent. 502
GRAIN PEDESTAL FAN AND DUCTING
£150 ovno. Evans & Pearce
1.1kw pedestal grain drying fan and plastic perforated 8" and 12" diameter ducting.
TEL: 07740 942905, Kent 653
MF RK421 SINGLE ROTOR
4.2M HAY RAKE
£3,500 +VAT. Selling due retirement TEL: 07709 796147, Surrey 648
GRAIN AUGER
£100 ovno. 4kw 3ph wheeled grain auger, approx 35ft long 6in diameter. Good working order. Can be dismantled for collection.
TEL: Nick Sturcke 07740 942905, Kent 654
MF BOMFORD SUPERFLOW 7-LEG CHISEL PLOUGH
£500 +VAT. Good working order. Sold with some spare parts
TEL: 07709 796147, Surrey
652
KIDD 10FT WATER BALLAST ROLL
£500 +VAT. 10ft water ballast roll. Excellent working condition
TEL: 07709 796147, Surrey 651
3 PIECE CAMBRIDGE GANG ROLL
£400. Used condition
TEL: 07709 796147, Surrey 650
X2 SOLWAY LARGE RECYCLING BINS
£200, offers considered. Excellent working order TEL: 07709 796147, Surrey 649
Your listing will appear in the
and online a week after publishing in print.
For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly. For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*. *Allow up to 3 days for processing.