Farm Machinery November 2024

Page 1


Bell Agricultural Ltd Support That Lasts a Lifetime

NEW

12.5.80x15.3 6-stud wheel/tyre £165

NEW

Super Single 10-stud wheel/tyre £250

NEW

Super Single 8-stud wheel/tyre £250

Tractors

*Used* Deutz 6180,16 reg, FL, front pto

*Used* Deutz 7250,16 reg, FL, front pto, 3500hrs

£55,000

£75,000

*Used* Deutz 62 15TTV 18 reg, 3000hrs, full spec POA

*Used* Deutz 8280, full spec, 60k, front linkage, 710/70/42 80% tyres

*Used* John Deere 6170R 14 reg, 50k, 6,000 hrs

*Used* John Deere 6155R, 1150 hrs, full spec, 21 reg

*Used* John Deere 6900 40k, R reg

*Used* John Deere 6330 07 reg, 40k, air con

*Used* John Deere 6330 10 reg, 40k, air con, 6500hrs John Deere 6330 10 reg, 40k, loader, air con, 6250hrs

£16750

wheel and tyre assemblies, ex Bateman sprayer

Baling & Tedders

Claas Variant round baler, nice condition

£13,300 John Deere 862 round baler, 2011 (Nice)

£15,000 John Deere 854 round baler

£10,500 tedder, 2020, tidy

Machinery

£7,000

Tel: 01582 727111 OLIVERS Petworth Tel: 01798 343660 OLIVERS

2023 CLAAS TRION 730 MONTANA £POA Ex Demo, c/w

2017 CLAAS LEXION 670 M T4F

£169,000 V770 Header, 30 kph, 1513 / 959 hrs, 500/70R24 Fronts, 680/85R32 Rears, LH laser, C-Bar Brake, Dust Extractor, Yield/Q Meter, Grainmeter, Yield mapping, Air Compressor, Straw Chopper, Chaff Spreader, Reversing Camera, Dust extraction for feeder housing MONTANA, Side risers for straw walker, 3D sieves, GRAINMETER incl. returns volume measurement with CEBIS display, Comfort seat air-suspended, Inclination sensor, CCM,

950 4WD

24 Blade Cylinder, 680/85 R32 Fronts, 540/65 R30 Rears, 1694 / 1131

4WD, R/ Crop

2016 CLAAS LEXION 780 TT £165,500 1230 VARIO Header, 30 kph, 2735 / 1695 hrs, NEW TERRA TRAC 635mm Fronts, NEW 500/85R30 Rear Tyres, LH V & RH V knife, C-Bar Brake, Dust Extractor, Yield/Q Meter, Grainmeter, Yield mapping, Telematics, CEMOS Auto, Air Compressor, Power Spreader, Straw Chopper, Reversing Camera, AUTO CONTOUR with cutterbar brake, CRUISE PILOT, APS threshing system, 4D-cleaning system, linseed rotor, 3D sieves, GRAINMETER incl. returns volume measurement with CEBIS display, Grain tank 13,500 litres, Grain tank unloading tube 4XL, Very nice combine, well maintained and serviced.

OLIVERS Tingewick Tel:

2018 CLAAS LEXION 780 TT

£225,500 1230 VARIO Header, 30 kph, 2222 / 1700 hrs, 635mm Fronts, 500/85 R30 Rears, LH V & RH V knife, C-Bar Brake, Dust Extractor, Yield/Q Meter, Grainmeter, Yield mapping, Telematics, CEMOS Auto, Cruise control, Air Compressor, Power Spreader, Straw Chopper, Chaff Spreader, Auto Slope, AutoCrop Flow, TM6 Sieves, Reversing

2010 CLAAS JAGUAR 930 4WD

Lube,

Corn Cracker, C/W XL spout extension, i36 grass header, Air horn, Rear camera with CEBIS display

£95,000 PU300, 20 Blade Cylinder, 650/75R32 Fronts, 540/65R24 Rears, 5194 / 3323 hrs, 4WD, R/ Crop Press, Auto Lube,

OLIVERS are a long standing family business with nearly 200 years of experience, we have many employees with over 30 years service with the company. In 1947 the business became the first independent CLAAS dealer in the UK, and has gone from strength to strength since that time. The last 4 years has seen significant growth resulting in an expanded sales territory and the addition of three new branches at Reading, Winchester and Petworth. As a result of this expansion OLIVERS has a number of exciting new career opportunities within the business and are looking to appoint new dedicated staff to fulfil the following roles:

Positions available at Petworth, Winchester, Reading & Luton

Due to the expansion of OLIVERS, we have exciting new opportunities for Experienced Service Engineers to join our growing team. You will play an important part in the servicing, maintenance and repair of CLAAS equipment to support our customers. A knowledge of combines, tractors and forage harvesters is desirable, however, full product training will be provided at the CLAAS Academy. More importantly, you will have the desire to provide the highest

Power Spreader, Straw Chopper, Chaff Spreader, Auto Slope, Reversing Camera, LASER PILOT guidance system left, Feeder housing AUTO CONTOUR with cutterbar brake, Dust extraction for feeder housing, CRUISE PILOT, APS threshing system, Hybrid unit for linseed with hydraulic rotor flap adjustment, GRAINMETER 2008 MAJOR 2400 LGP £7,575 MEC 8000l PTO pump, Hyd changeover, drawbar damper, 800/65R32 Tyres-new last year, Side fill port

level of customer satisfaction, an ability to learn new skills and the willingness to succeed. In return, we offer an excellent package including a competitive salary, contributory pension plan, laptop with the latest diagnostic software, mobile wifi connection, mobile phone a dedicated service van and extensive holidays. If you would like to move forward with a highly successful dealer allied to a global brand we would like to talk to you.

2023 HORSCH LEEB 6LT

£129,950 36m, GPS prepared, Induction bowl, CCS Pro auto cleaning system, S/S induction

www.oliveragriculture.co.uk

£1,000 OFF ALL NEW HONDA

WHEN WORKING DAYS ARE

POLARIS SPORTSMAN 570 ATV, non power steering ................. £7650

POLARIS SPORTSMAN 570 ATV, power steering £8099

POLARIS RANGER 1000 petrol, white, full size ........................ £13995

USED ATVs/UTVs

HONDA TRX520 FA6, 2020, Auto, 2/4wd .................................... £6950

HONDA TRX420FM1. 2019/19. Plate, Camo.................................. £5995

KYMCO MXU550, Ex Demo £5995

POLARIS OUTLAW 90, Youth machine, Blue/White. Little used £1599

POLARIS RANGER Diesel 2019/19 plate, Half Cab.................... Due in

POLARIS RANGER Diesel Half Cab 2022 c800 + hours £14995

POLARIS RANGER Diesel, 2022/22 plate. Full Cab ........................ £13995

POLARIS RANGER Diesel, 2021, Full Cab £13995

POLARIS RANGER Diesel 900 Crew Due in

TYM TRACTORS

We are delighted to now have an area dealership for TYM tractors from a25-105hp, together with factory options

Petersfield Galvanised on/off road, stock, low side tipping trailer: EXCELLENT VALUE from £975 +VAT

USED COMPACT TRACTORS

JOHN DEERE 2320HST, 23hp, 1359hours ......................................... £7995 TYM T194, 19HP, c/w Mid Deck, Ex Demo £9995

USED MACHINERY

6’ Three Point Linkage Tined Harrow.................................................. £395 CYCLE country 4’ snow plough assembly £450

KUBOTA wheels & tyres, ag & turf POA LOGIC 6’ Chain Harrow ................................................................ £200

RYETEC BC100H9 Wood chipper c/w Honda engine, virtually

NEW & USED STOCK

MORGAN MACHINERY LTD

Kubota diesel engine 1749 hrs

£5750

JCB 8014, blade, piped, offset, 1.4tonne, 2017, worklights, 1290 hours c/w 3 buckets. GWO

£POA 40 foot container, Very solid,

Benford 3 tonne straight tip dumper, 3 cylinder Deutz air cooled engine, GWO

£POA (dog not included)

Doosan DX27, 2018, blade, piped, offset, 2123 hours, hydraulic quick hitch, 2 speed tracking, c/w 3 buckets, Very Tidy

£15750

Sany SY16, 2022, 1.6 tonne, 303hrs, expanding tracks, quick hitch, c/w 3 buckets

£11750

Massey Ferguson 5711 4wd tractor, 2023, only 1177 hours. Fitted with Massey Ferguson FL3823 loader (Euro8 headstock). Immaculate. Call for more details.

£POA

Thwaites 10 tonne, 2014, 4cyl Deutz engine folding roll bar, 2924 hours GWO

£12500

Salop Marston 12 tonne trailer, hydraulic lower / lift side and hydraulic rear door, LED lights, grain chute. Grain tight

£4750

JCB 1 tonne, hi-tip dumper, 3cyl Kubota diesel, 1297 hours, good working order

£7495

Hitachi ZX19U, 2018, 1.9 tonne, new tracks, 1192hrs, expanding tracks, offset, piped c/w quick hitch and 3 buckets

£10950

Concrete Mixers, a large choice available, 150 litre and upwards, steel or rubber wheels.

From £500

JCB 8025, 2015, blade piped, 2 speed tracking, 3 cylinder Perkins engine, c/w 3 buckets

£14250

Brendon 1000ltr pressure washer bowser Road tow, Yanmar diesel engine, GWO

Choice from: £1750

Large selection of steel framed buildings in varying heights, widths and lengths.

Call for details and price

£POA

Kubota

2016,

and

Kubota 1.5 tonne micro digger, 3 cyl Kubota engine, 2952hrs, blade, offset, piped,2 speed tracking, c/w 3 buckets
KX61-3, 3 tonne
blade, piped, offset, 2960hrs, c/w quick hitch
3 buckets
£15250
AS Marston/ Griffiths 12 tonne silage trailer, 8 stud super singles, sprung drawbar, auto rear door Very tidy £7750
Double Drum Vibrating Rollers, Large Choice of machines in various widths

EXCAVATORS

Hitachi ZX210-6, 2018, 6500 hrs

Hitachi ZX210-6, 2019, 6150 hrs

Hitachi ZX225-6, 2018, 7000 hrs

Hitachi ZX210-3, 2009, 9400 hrs

Hyundai R220, 2014, 8200 hrs

Hitachi ZX130-6, 2017, 5500 hrs

J.G.F. Machinery Ltd

£23,000

£25,950

£29,950

Hitachi ZX130-6, 2018, 6400 hrs £29,950

Hitachi ZX130-6, 2018, 7300 hrs £28,950

Hitachi ZX130-6, 2018, 8200 hrs £27,950

Doosan DX140LC-5 c/w blade, 2017, 5400 hrs

Doosan DX140LC-5, 2018, 5400 hrs

Doosan DX85R-3, 2019, 3400 hrs

Kubota KX080-4, 2019, 4300 hrs

Kubota KX080-4, 2017, 6350 hrs

ZX85, 2019, 3300 hrs

U17, 2019, 1400 hrs

KX008, 2019, 1050 hrs (choice

toplink,
2009 John Deere 6930 50kph
9760 hours. 2010 JCB 526-56 Agri C/w pick up hitch, and fitted on good 460/70R24 tyres all round.
2022 Farmet Fantom 650 Classic - New and unused, strong and well built machine!
2005 Horsch Terrano 6FG 6m
C/w rear harrow and drawbar, good metal
Kverneland LO85-300 Auto reset, hydraulic vari width, very tidy, new metal throughout
2007 John Deere 7830 50kph PowrQuad, front linkage, 8402 hours, Trimble guidance
2005 John Deere 6920 50kph AutoQuad, front and rear suspension, 3 SCVS, 10,492 hours
2003 John Deere 6520 40kph PowrQuad, 1 owners. only 5211 hours! Very tidy.
1995 Ford 5640 Powerstar SL 30kph SynchroShift dual power, 2 SCVS, 2WD, 6913 hours.
2021 Claas Tucano 480 C/w Claas 770 Vario header and 520 trolley, 805 and 545 hours
2018 Farmet Fantom 850 Pro Hydraulic depth adjustment, steel ring packer, ready to work 2020 Horsch Cruiser 7XL
working width, C/w Horsch minidrill, double soil packer
Kverneland LM 85-200
furrow, hydraulic front furrow, No. 8 bodies, maized skimmers
2021 John Deere 6195R Ultimate Edition, front links and PTO, 50kph AutoPower, 3067 hours
2015 John Deere 6190R 50kph AutoQuad with Air brakes, just 5735 hours. VG tyres, 3 SCVS
2020 John Deere 6155R 50kph AutoQuad, front weight, 3 SCVS, SF3000 dome, 3475 hours
2005 John Deere 6820 40kph PowrQuad, front linkage, TLS, 3 SCVS, 6117 hours
2018 John Deere 5090M JD 543R loader, only 3725 hours and in very tidy order
1973 Ford Force 3000 With factory power steering, good runner, 5047 hours
Bailey 14 Ton Flat Trailer C/w sprung drawbar, sprung axles, potato box clamps & walkway
Vaderstad Rapid A400S System disc and in very good order throughout, recording 3985ha
2023 Bailey TB 18 Trailer C/w silage sides and hydraulic roll over sheet
2009 Vaderstad Carrier 650 Crossobard leveling paddles and rubber runner packer
2005 Cousins 12.3m Rolls 24” plain rings, contouring, vertical fold rolls

P.J. Machinery

Main agents for: LANDINI, KIOTI, ALO, BREVI, BOMFORD, BROWNS, HI-SPEC, LSM, McCONNEL (Cultivation), McHALE, MX-UK (Chilton) OPICO, PROTECH, QUANTOCK SIGMA4, SHELBOURNE REYNOLDS, SULKY, TEAGLE, TWOSE, WALTER WATSON, WESSEX, WILLIAM HACKETT New Wharf, Ashurst, Nr. Steyning, West Sussex. BN44 3AL. Phone: 01903 815544 Email: tgiandy@yahoo.com Mobile/WhatsApp ANDREW: 07710 810434

PHIL FORD  MACHINERY

Garthend, Redbrook Street, Woodchurch, Ashford, Kent TN26 3QS

New Teagle toppers

ALL PRICES QUOTED ARE +VAT, EX YARD, P/X OPTION, DELIVERY NATIONWIDE

WANTED: ALL MAKES OF AGRICULTURAL TRACTORS & FARM MACHINERY PJ MACHINERY: FOR ALL YOUR AGRICULTURAL FINANCE NEEDS

British heavy duty harrows

Mounted harrows

8ft flat roll

8ft mounted grass harrows £600

8ft flat roll

8ft ring roll

Ford 4600 Rough

John Deere power loader

Kubota ST 35 tractor

MF single furrow plough

£995

£250

NEW post hole borers 1 yrs warranty £650

2.2 mtr splitter c/w rear roller £2,100

Binderberger WS 700 saw bench and log splitter

Browns post pusher fits digger or tractor

Browns mole plough

2x compact cultivators

2x 10ft flat rolls

8ft Disc Harrows £650

Compact tractor single furrow plough

David Brown 996

Diesel site tow bowser £650

EZGO Golf buggie (electric)

q65 drum mower

Power Major RV 390 hay turner and hay drum mower

Salop 4 ton tipping trailer £950

Sitrex 300 hay turner

Trimax 180 mower £2,250

Vintage cultivators

Vicon 1553 vari spreader

Vicon 400S spreader

Yanmar compact tractor £2,950

Zetor 6911, T reg, very tidy

9ft Votex 6ft flail 3T tipping very tidy

All prices plus VAT | Selection of wheels, tyres, buckets, forks and weights. Tractors and Equipment always wanted. This is only a selection of equipment available. Please phone for more details & prices.

Tel: 01233 861456 Mobile: 07711 162001

www.philfordmachinery.co.uk

Watson 12-36 Roll
6.2 Opico 6.2m grass harrows
Agrimac 14t dump trailer

71081348 John Deere 8RX 410 2021, 2840hrs, Signature Edition, 40K, AutoTrac Ready (no dome), Activations, Cab suspension, Ultimate comfort, visibility & connectivity package, air seat, £199,950

71082420 John Deere 6215R

2021, 3610hrs, Premium Edition, AutoPowr, 50K, AutoTrac Ready, Activations, TLS, HCS, air seat, A/C, 4ESCV, 155L/min hyd pump, PUH, air/hyd brakes, B post, £96,950

81089222 John Deere 6175R

2015, 3747hrs, DirectDrive, 50K, AutoTrac Ready, TLS, air seat, A/C, 3ESCV, PUH, hyd/ air brakes, 540/65R30 650/65R42, Road Registered: 28/05/2015, April 2015 Build. £74,950

£199,950

11089716 John Deere 8370R

2020, 1650hrs, AutoPowr, 50K, Ultimate Edition, ILS, HCS, AutoTrac ready, Activations, A/C, air seat, 9.0L FT4 Engine, 85CC + 35CC hyd system, 5ESCV, 1000/1000E PTO, Cat 4

51088904 John Deere 6195R 2019, 4300hrs, Premium Edition, AutoPowr, 50K, AutoTrac Ready, Activations, TLS, HCS, air seat/ A/C, 4ESCV, 155L/min pump, PUH, air/hyd brakes, £84,750

31083808 John Deere 6155R

2020, 3850hrs, Premium Edition, DirectDrive, 50K, AutoTrac Ready, TLS, HCS, 3ESCV, PUH, front linkage W/1ESCV, air/hyd brakes, NEW BKT 540/65R28 £69,950

11086552 John Deere 7R 330 2020, 1465hrs, AutoPowr CommandPro, 50K, Ultimate Edition, AutoTrac complete, Activations, TLS, HCS, front linkage W/SCV, PUH, air/hyd brakes, 5ESCV, £189,950

51089379 John Deere 6195R 2019, 5520hrs, AutoQuad, 50K, AutoTrac Ready, TLS, HCS, 3ESCV, PUH, front linkage + PTO W/1ESCV, Panorama roof, NEW BKT FRONT 600/65R28, 650/65R42, £79,950

11086390 John Deere 6155R

31080510 John Deere 7R 310

2022, 2040hrs, Premium Edition, AutoPowr CommandPro, 50K, AutoTrac Ready with integrated SF600 receiver, Activations, TLS, HCS, air seat, A/C, 5ESCV, PUH, hyd top link, £179,950

41083738 John Deere 6175R 2017, 5160hrs, Premium Edition, AutoQuad Plus, 50K, ISOBUSand Green Star ready (no Activation), TLS, HCS, air seat, A/C, 3ESV, 114L min hyd pump, £64,950

2019, 4104hrs, Ultimate Edition, AutoPowr CommandPro, 50K, AutoTrac ready, Activations, TLS, HCS, A/C, air seat, 155L/min pump, 3ESCV, PUH, air/hyd

£83,950 £69,950

51083949 John Deere 6155R

2019, 4457hrs, AutoPowr, 50K, AutoTrac Ready, TLS, HCS, air seat, A/C, 4ESCV, front linkage, PUH, air/hyd brakes, 540/65R28 650/65R38, Road Registered: 2/2019,

41080524 Kramer KL25.5T

2023, 50hrs, Hydro, 54HP engine, 30K hydro, 325/70R18 Mitas tyres, orange beacon, front/rear working lights, A/C, radio, diff lock,3rd service depressure £49,950

11090202 John Deere 6155R 2017, 4010hrs, AutoQuad Plus, 50K, ISOBUS/Green star ready (no activation), TLS, HCS, air seat, A/C, 3SCV, PUH, 114L/ min hyd pump, Premium Light package, £67,750

71087671 Kramer KT557

2019, 3110hrs, Hydro Ecospeed, 40K, boom suspension, central lubrication system, LED lights, JCB Q fit headstock (No pallet tines), A/C, air seat, reverse £64,950

11089358 John Deere 6155R 2017, 4770hrs, AutoQuad, 50K, AutoTrac Ready, TLS, HCS, air seat, A/C, 3SCV, PUH, front linkage, air/hyd brakes, NEW 480/70R30 520/85R38, Road £67,950

51082205 Kramer KT407 2021, 3097hrs,, Hydro, 40K, boom suspension, central lubrication system, LED lights, Pin and Cone headstock, 3rd service depressure button, air seat, A/C, £59,950

41086668 John Deere 6155R 2019, 3410hrs, AutoPowr, 50K, TLS, HCS, 540/65R30 650/65R42, 3ESCV, AutoTrac Ready, air/hyd brakes, A/C, air con, front linkage, JDLink, 4600 screen, mid £89,950

11083773 John Deere 6130R 2019, 2892hrs, Premium Edition, AutoPowr, 50K, AutoTrac Ready, TLS, HCS, air seat, A/C, 3ESCV, PUH, air/hyd brakes, 540/65R24 600/65R38 £69,950

• Howard Pullen Machinery Ltd •

H.J. KNIGHT & SON

EST. 1850

Switchback Farm, Woodmancote, Chichester, West Sussex, PO18 8UL

Claas Liner 3000 4 rotor rake, electric controls

Einbock grass harrows in stock 6-12 meter

Fella twin drum mower KM167 VGC

Foster ST5 swipe topper Very heavy duty

Galuchio 6mtr press c/w carrier tine kit

Gyrax HD2800 H/D topper Y18

He-Va sub soiler hyd folding 5 leg V. HD

£7,995

From £1,995

£795

£1,650

£4,950

£2,995

£8,250

Hymari HGN150 rotovator Y09 .......................................................................

£1,500

JCB 412S Shovel 1998 Due in

Knight triple press hyd folding 6 mtr

Krone 6 rotor tedder 200,1 runs ok

Krone Easy cut 320-cv mo/co 2011

KRM M3 Bogbelle spreader 2011

Kubota RTV X900 ’67 reg high hours

Kubota GR2120 ride on diesel mower

Kuhn Axis 30.1 spreader 2007 manual controls

Kuhn Axis 40.1W weigh celled 2010

Kverneland CLD 5 mtr cultivator VGC

Lely Lotus Stabilo 770 6 rotor tedder

Lely Hibiscus 745 vario twin rotor rake 2011

Lely SuperZip 380 combi tedder rake

Low loader trailer twin axle c/w from mounted crane

Malone vertical log splitters in stock

NEW Malone Post Knockers hyd top link and tilt

Massey Ferguson 590 tractor

McConnel PA6070 hedgecutter 2011 .........................................................

McConnel PA6085 hedger ’17 ......................................................................

McConnel PA55 V3 controller straight trimmer

New Holland 648 round baler

Opico Sward lifter immaculate

Opico 6 mtr harrows 2022 immaculate

Pel Job EB406 digger, full cab, twin speed tracking

Range Rover Vogue Y03 Runs & Drives

Sicma King 4 mtr power harrow

Teagle Tomahawk 8100 chopper 2012 giraffe chute

Vaderstad Rexius twin Press fixed legs

Volvo EC15 digger 2798hrs 4 buckets

Wessex transport box

3point linkage post driver

550 flotation tyres to fit 8 stud trailer Vredstein rubber 80%

£6,500

£1,995

£4,995

£2,250

£3,995

£2,995

£2,995

£2,995

£6,995

£4,995

£6,450

£695

£6,995

£CALL

£3,450

£4,995

£14,995

£11,950

£5,995

£3,995

£4,995

£4,450

£6,995

£1,250 No VAT

£2,750

£4,450

£8,450

£5,995

£375

£995

£1,750

Various Malone machines held in stock including post knockers, log splitters, tedders and mowers please call for details

• WANTED Zetor 2&4wd • Mobile Welding • Air con. Repairs & Gas

• All tractor & Machinery repairs • Prices exclude VAT and delivery

Takeuchi TB014 mini digger 2004 3800 hours, Lovely condition
John Deere 6320SE + John Deere 633 loader. Year 06 7332hrs PQ 40K A/Con A/seat
Massey Ferguson 6290
Kawasaki 4010 Trans Mule
Talex Leopard RB 180
offset flail topper
Merlo 32.6L Panoramic Handler
Massey Ferguson 6480
Kubota B2530 cabbed

1.9

KRM fertiliser spreader

KRM Mounted Spreaders have an excellent reputation for their quality and their durability; making them exceptional value for money.

d Drilling Equipment

Crop Protection, Cultivation and Drilling Equipment

Bomford Hedge Cutter LEMKEN

TEAGLE flail mowers

Teagle Flail Mowers and Mulchers have a range of features to ensure ease of operation and straightforward maintenance for a long and trouble-free service life.

KRONE GRASS MACHINERY Mowers, Tedders, Rakes & Balers

ISEKI Compact Tractor and Diesel Mowers collection and mulching

ISEKI Compact Tractors

Diesel Mowers, Collectors or Mulching Decks

With over twenty five years’ experience E W McTrab provides readers with reviews and tips on the purchase of various pieces of machinery.

CAREFUL CHECKS KEY TO SOUND USED FEEDER BEDDER BUY

McHale launched the first of what is now a four-model silage feeder and straw blower range to farmers back in 2010, with the initial trailed C460 having the capacity to process up to two 1.20m round bales or a single 2.40m rectangular bale. Over a decade on, used examples of these and the other models in the range are now on offer, but you need to know what to look for to secure a sound buy.

MCHALE

C430 FEEDER BLOWER

Year: 2018

Condition: Excellent

Comment: Mounted C430 models need a tractor with sufficient lift to cope with heavy bales. Well suited to a tractor with a loader as combination is relatively compact and small yard friendly.

Price point: £8,500 +VAT. Worn units from £5,000 + VAT, ready for work from £6,250 +VAT.

Right from the outset, it is important to make one obvious point clear. A good number of silage feeders/straw blowers are likely to be used hard and given little in the way of maintenance. There will always be a trickle of decent used examples on the market, but you do need to make sure you know what you are buying. McHale dealers could well offer models that they have refreshed or refurbished, but these may carry a premium that reflects that they have been readied for front line service. If you are looking at a private or auction C4 ‘chopper blower’ buy, assume it will need some work doing to it. These are simple items of kit, but this does not mean they do not wear. It is all too easy to not factor in the time it may take to fettle a well-worn machine and the cost of replacement parts.

MODELS

The trailed C460 (two 1.20m round bales) model was joined in 2016 by the tractor mounted C430 (single 1.20m bale), in 2017 a trailed C470 (two 1.50m bales) and a longer C490 (three 1.50m bales)

MCHALE

C470 FEEDER BLOWER

Year: 2016

Condition: Good

Comment: Fully dealer prepared example. Popular size takes two 1.50m bales, but smaller C460 for two 1.20m bales are also popular. Small wheels are fine for yard work loaded but not for high transport speeds.

Price point: £12,000 +VAT. Worn units from £7,500 + VAT, ready for work from £8,500 +VAT.

MCHALE

C470 FEEDER BLOWER

Year: 2021

Condition: Ex-demo

Comment: Ex-demo models not over common, those that do come up typically selling for near new money.

Price point: £18,000 + VAT

model in 2019. All share the same chopper rotor, flywheel blower and chute system. It follows that rectangular bales can also be handled by the machines (see specification table for bale chamber dimensions). The C460 is the most popular model and the

C470 FEEDER BLOWER MCHALE

Year: 2020

Condition: Good

Comment: Dealer prepared examples command strong money, but good looking late examples may have seen a lot of work so check if not dealer sourced.

Price point: £15,500 + VAT

MCHALE

C470 FEEDER BLOWER

Year: 2021

Condition: As new

Comment: Dealer stock. In certain regions, smaller C460 models are more popular. Check with McHale. Prices of steel have pushed up new prices, but still check against buying new.

Price point: £17,250 + VAT

most likely used find. Regarding specifications, there is a choice of tyres for the trailed C460 and C470 and, drawbar options aside, that is about it. Making this element of selecting a used model simple.

Trailed C4 models unlikely to show wear in the drawbar ring but the wide angle pto may have seen some abuse so check carefully and ensure all pto guarding is fitted and working correctly, if not, it should be replaced. Livestock kit like this tends not to be given much attention so be careful if looking at a non-dealer prepared buy.

RETAIL

Complete set of chopper rotor blades - 56 blades (including fasteners)

Flywheel chamber liner

Hydraulic filter

Full set of floor chains, floor slats, U-bolts and nuts

Floor shaft bearings bushings

Drive belt

Blower Knife in Chute

Floor Motor

£400 + vat

£90 + VAT per liner

£65 + VAT

£1,100 + VAT

£90 + VAT

£185 + VAT

£200 + VAT

£780 + VAT

KEY DEVELOPMENTS

McHale got the C460 pretty much right from the outset, with the key developments including:

• 2011: Earliest models had smaller diameter blade bolts

• 2013: Galvanised floor slats and U bolt attaching them to the chain

• 2016: Original six-disc chopping rotor changed to revised design with extra disc on nearside to provide extra ripping of bale to prevent blocking the flywheel

• 2016: Plate fitted under the nearside of rotor to stop material accumulating at the end of the rotor

• 2019: Replaceable bolt in Hardox liner insert added to discharge chute

• 2020: New control console

WHAT’S USED

A lever is used to manually select between high, neutral, and low. Work between these positions and if possible, run the machine up empty to ensure drive engages smoothly. Note flywheel reversing rod in its holder (Arrowed).

Stored above the speed selector lever, the flywheel reversing rod is pushed through an access hole covered with a plate that will only open up when the gearbox is neutral. The flywheel runs separately to the chopper rotor, making it easier to clear a blockage. The simple unblocking procedure is outlined in the operator’s manual.

The original six-disc rotor was not liable to problems with most bales, but users could find longer strands of mainly grass could be caught in the flywheel, leading to a reduction in output. The plate fitted under the end of the rotor cured the problem for most, so this should not deter you from buying an early used model as a bolt on kit is available through your local McHale dealer if needed.

MCHALE C4 SERIES OUTLINE SPECIFICATION (FROM 2019 MODEL YEAR – SEE TEXT FOR DIFFERENCES BETWEEN EARLIER MODELS)

Conveyor Drive Hydraulic

No. of Discs on Rotor

No. of Knifes

Rotor Drive Type

Gearbox

Tractor Hydraulics

7

56

High Torque Belt Drive

Twin Speed

1 x feed, 1 x return

Minimum Oil Flow requirement 35 litres/min @ 160 bar (2,320 psi)

Control

Chute Rotation

Chute Composition

Max. Discharge Distance

Expert control console with joystick chute control

300 degrees

3 stage

18 metres

The two-speed gearbox should have had a first service oil change at 50 hours and clean oil at least once a year using 80W 90 gear oil. The transmission has slip and overrun protection. The lower 280rpm gearbox speed should be selected for feeding forage, the higher 540rpm suiting straw for blowing. The pto incorporates a slip clutch, scorched paint at this end suggesting a history of slipping and the need for further investigation –replace if necessary.

A triangular inspection plate allows the flywheel to be inspected. Job one is to check for excess clearance between the blower blades and the flywheel housing (inset lower) and for the condition if the flat ‘V’ shaped blades at the base of the chute (inset upper). The flywheel housing liner is replaceable, with a bolt-in Hardox steel chute liner being fitted from 2019.

MCHALE C4 MODELS

Tyres (Optional) N/A

*Straw/hay. 1x bale of haylage/silage

Easy to access, the hydraulic filter for all hydraulic services has a replaceable cartridge insert that should be changed at least once a year. Worn paint on the hosing nut suggests this unit has seen attention. It pays to replace the cartridge on a used buy as it is not expensive or difficult.

A shaft from the main two-speed gearbox transmits power to the chopping rotor via a ribbed belt. It is worth removing the black cover to look at the belt, tensioner system that engages drive. Unlike most pto driven equipment, the belts should be engaged when the engine is running at pto speed. This ensures full power is directed to the chopping rotor helping to ensure material already ‘in the system’ is cleared with a much-reduced chance of blockages.

Located at the front of the machine, the floor drive hydraulic motor should be fine even on a machine that has done a lot of work, but dirty oil can cause problems. Hence the need to change the filter. Look for leaks and make sure the motor is bolted tightly to the machine.

The notches cut into the tailgate are serrated to provide a foot hold when climbing into the rear of the machine. The slat floor is likely to be slippery, so take care when inspecting the machine. Obviously do not enter the machine with the tractor running and remove the ignition key.

In 2016, an extra disc was added to the inside left of the rotor. This was done to provide an extra level of ripping to prevent long material getting drawn into the flywheel un-chopped as opposed to curing problems with blocking. The comb and plate above the rotor adjusts to vary the pressure on the bale and help vary the degree of chop. The plates on the comb can be turned 180° to make the machine more aggressive on straw.

The extra disc at the end of the chopping rotor ensures all the bale is chopped. Note the plate fixed to the side of the chamber. This will also be fitted to 6-disc models. The very first models launched in 2011 have smaller diameter blade bolts but this is not a problem area. New bolts must be fitted when the blades are replaced.

Original chopping rotor was fitted with six bladed discs. In 2016, a deflector plate was added to the side and under the left of the rotor to deflect material from the flywheel. Some materials can block at this point, the plate typically resolving any problems.

The serrated knives are reversible. Note they are angled as opposed to flat. This is to help ensure the bale is ripped rather than sliced into sections. For bedding, this will produce a shorter straw and in silage helps improve the palatability of the forage.

<<

The key check points are listed in the pictures and captions, these relatively simple machines rewarding those who take time to study the operator’s manual with a tool that can be used to feed out round bales of silage and then swap to spread and chop a straw bale for bedding with little effort.

SUMMARY

There is not a great deal to report on these machines. If the machine looks in a poor state from a few paces away there is every chance it will not improve upon closer inspection. If you are not prepared to put in some workshop time to fettle a sound but tired used buy your best bet is to seek out a machine from a McHale dealer. These days, dealers are finding it increasingly viable to put some workshop time into machines that they will retail as opposed to sell on to the trade. Let your local McHale dealer know what you are after and, if you are not in a hurry, the chances are they will be able to source a machine for you.

With thanks to: F J Tombs and Sons, Shabbington, Bucks, Oliver Landpower Ltd, Luton and Kieran Hughes, McHale UK.

The 2020 McHale Expert Control has a separate joystick control that can be worked either from its mount next to the main controller or moved to a seat armrest or other position to suit personal preference (inset upper). The previous control had the joystick built into the unit, with switches rather than the buttons of the current design to control various functions.

The floor chain tensioners are easy to adjust. Check they are adjusted to the same distance on both sides and not at the end of their adjustment. The chains have two ‘spare’ links that can be removed to take up the slack in a worn chain, but this can only be done once (see the operator’s manual). Expect a well worked machine to have had its chain shortened. Also note the grease points for the rear chain shaft and the tailgate. These only need a periodic shot of grease, but this can be overlooked.

On the rear of all models there are two switches (C490 has 3 switches due to two floors) that enable the rear tailgate to be raised and lowered and the floor drive to be engaged or reversed. A safety button must be depressed for the switches to work (inset).

Turning through 300 degrees, the chute is turned via a hydraulic motor that acts on a gear ring at the chute base. When checking the machine, run the chute through its full swivel and check the flap lifts and lowers through its full travel. When set to feed out, the chute deflects material onto the feeding tray on the machine to allow it to discharge into a trough or the ground. Wear in the discharge system is a good indicator of how much the machine has done.

The floor slats attach to the drive chain. Look for damage and ensure the floor chains are adjusted evenly. A simple check is to pull a slat up. If you can lift if up easily, the tension may need a check. Also look under the slat, wear in the ‘U’ bolt suggesting the machine has done a lot of work. The chain and slats had a galvanised finish from 2013.

SALES SCENE

If you have a story, or an event, please do get in touch: peterlove@madasafish.com, TEL: 01323 833125

Well the pace of sales is just starting to slow down, but we still have at least four to go. The trend on the second hand market has been stronger than ever as has the preservation scene as we survey all that has been going on here.

DOE MAKES BIG BUCKS

It was all eyes on the Patrick Edwards finale sale on Saturday 14 September at Langley Farm, Clanfield, Bampton, Oxfordshire. I have known Patrick for decades and he has been a true gentleman to deal with as has Derek who ran the parts business and was seen at all of the major shows with the stand, they will be sadly missed.

The sale had elements for all parties in it, held in gorgeous weather. The major highlight was the 1963 Doe-Triple D D283. The tractor had been very well restored by Patrick’s son George and featured a full set of Goodyear tyres. However the price is remarkable and was basket case brought back from Denmark when Cheffins sold it at their 2016 summer collective. For this reason the £70,000 is just a remarkable price and bodes well for this make again,

which has been hitting the headlines all season, but for original examples.

The grade 4 Fordson E27N Major with Perkins P6 and a 1977 log book was got away at a good £9,500. As for the 1963 Fordson Super Dexta 154VYC it was sold at a good £6,200 in grade 5 condition. The best in the Massey line was the cabbed (without doors) restored 1975 Massey Ferguson 148 HFJ564N at £11,500. The working Ford 5610 two-wheel drive was got away to Kent for £5,800. The many second hand Ifor Williams trailers made hot money when for a little bit more you could buy new. There was VAT on a mixture of the lots.

All in all a very good sale for Patrick and in the next field Shed and Buried TV star and local boy Henry Cole who was seen with his production company filming at the Cotswold Oil Preservation Society’s autojumble that was also taking place the same time as the sale.

The big number at the Patrick Edwards sale was the 1963 Doe Triple-D no. 283 at £70,000

Showing the upward trend in 65s, the MF Mk1, 428ZVW was yours at £6,500 +VAT

H J PUGH COMES TO KENT SALES

For the very first time in Kent, Henry Biss staged the H J Pugh Brodie Ross Thompson downsizing sale near Chiddingstone Causeway, Edenbridge. This company use online facilities and are better equipped to get the best for the customer compared to some other auction houses that don’t always use this facility. With the screen in front of the auctioneer on the pick-up you could see exactly what was going on. In this just under 200 lot sale there was much woodworking equipment offered which sold well along with Brodie’s venerable Ford tractors and excavators that were all well maintained.

The Fordson E1A Major with loader was a typical woodman’s workhorse went on to sell for £2,600. His Ford Force 4000 with

Not with the best of cabs the Ford 8210 III sold for £11,000

made an excellent £7,000 and had been well maintained

here all in all an excellent sale

Lambourn cab and 5,540 hours in need of rear wings owing to rust, sold well at £3,400. The 1968 Ford Force 5000 RPM78G with humongous anchor on the back of the Boughton 10 ton winch sold for £6,000 needing the works really, although again well serviced. The Ford 8210 III with its Super Q cab which for some reason was rather rusty sold for a good £11,000 all without VAT.

The Scandinavian Rottne timber loader based on a Ford 7700 again well serviced sold for £4,300 and the Bedford TM FWD certainly a rare beast with hiab on the back raised a very good £7,000. All in all a very good crowd turned up for this relatively small sale and all were impressed as to the way it was efficiently conducted throughout by the Pugh team.

4 November

Auction of Tractors, Quad Bikes, Commercial Vehicles, Implements, Machinery, Small Tools & Equipment. Longtown Mart, Townfoot, Longtown, Carlisle CA6 5LY. Cumberland & Dumfiesshire Farmers Mart, tel: 01278 791215.

6 November

Timed Online Collective Sale of Tractors, Plant, Vehicles, Trailers, Machinery, Tools & Spares. Clarke & Simpson, www.clarkeandsimpson.co.uk

Online Sale of Tractors, Machinery, Plant & Commercial Vehicles. Carlisle. Harrison & Hetherington, www.harrisonandhetherington.co.uk

6-7 November

Online Machinery Sale. Lawrie & Symington, www.lawrieandsymington.com

8 November

Online Plant & Machinery Auction. Brightwells, www.brightwells.com

9 November

Vintage Auction at Newark Vintage Tractor & Heritage Show. Newark, Showground, Lincoln Road, Newark, Nottinghamshire NG24 2NY. Brown & Co, www.brown-co.com

Collective Sale. Hexham Auction Mart, Tyne Green, Hexham, Northumberland NE46 3SG. Hexham & Northern Marts, tel: 01434 605444. 11-12 November

Cambridge Machinery Sale. The Saleground, Sutton, Ely, Cambridge CB6 2QT. Cheffins, tel: 01353 777767.

14 November

Auction of Modern Farm Machinery & Equipment. Soars Lodge Farm, Foston Lane, Foston, Leicestershire LE8 5WP. Brown & Co, tel: 07919015675.

Online Timed Machinery Sale to Incorporate Rural & Domestic Bygones. Clitheroe Auction Mart, www.auctionmart.co.uk

Toy & Transport Auction. Burwash Road, Heathfield, East Sussex. Watsons, tel: 01435 862132.

16 November

Langar Collective Machinery Auction. NG13 9HY. Barry L Hawkins, tel: 01366 387180.

21 November

Sale of Private Collection of Taskers Steam Roller, Early Foden Lorry, Tractors including 13 Field Marshalls, Workshop Tools. Crediton, Devon. H J Pugh & Co, tel: 01531 631122. 21 November - 1 December

Online Timed Auction. Stags, www.stags.co.uk

22 November

Dispersal Sale of Groundwork Plant, Machinery, Vehicles & Workshop Tools. Walkerburn. Harrison & Hetherington, tel: 01228 406200.

23 November

Automobilia Auction. Machinery Saleground, CB6 2QT. Cheffins, tel: 01353 777767.

Daewoo 130LC raised some £7,800
The Rottne skid loader with Ford 7710 mechanicals sold for £4,300
Komatsu PC7R8 which was Brodie’s main workhorse sold for £7,250
Hitachi EX45.2 excavator went on to make £6,900
Bedford TM 4WD

PRICES HOLD AT EURO AUCTIONS

There was a mixed bag of tractors that were offered for sale at the latest Euro Auctions’ sale on Wednesday 11 September where just over 60 machines went under the hammer. As ever, a selection of crawler tractors were the first to be offered for sale, followed by various newer models which always attract some strong bidding.

Here though, the numbers of tractors were down from previous occasions although there were still some quality machines looking for a new home, leaving a good selection of older machines to complete the sale.

So looking at the sale in a bit more detail, when the crawlers were showcased on the selling ramp, a Kubota KM120D grade 10 that was in good condition came out on top when it sold for £14,000, while not far behind was a Yanmar CT95 with blade that made £13,000 grade 9.5.

The newer tractors the went under the hammer, where the top spot was shared between a couple of 2021 John Deere 6195Ms that were in excellent grade 11 condition. They sold for £52,000 each while other John Deeres of note included a 6175R from 2016 with front linkage grade 10 sold for £30,000, while another pto fitted 6190R from 2014 and a 5100M from 2020 each sold for £27,000 grade 10. John Deere prices still hold on to the number

There were a couple of 2021 John Deere 6195M tractors that were both from 2021 and were in equally good condition. They both sold for £52,000 the best price achieved in the sale

one position in the UK.

There were also a couple of Valtra tractors that were in very good condition grade 10. The first was a T174e Versu from 2017 that went on to sell for £36,000, from the same year but somewhat cheaper was a Valtra N134 that sold for £24,500.

Moving on, and there was a good selection of New Holland tractors going under the hammer where a T6.150 from 2012 grade 10 that was fitted with a NH 740TL front loader went on to sell for £26,000 while not that far behind was a T7,200 from 2016 that went on to make £23,500 again grade 10.

Also doing well was a 2016 Case Puma 160 CVX that came with front linkage and pto grade 10.5. In good condition overall, it sold for £29,000, while a 2016 McCormick X7.680 that also was worth a second look sold for £21,500 grade 10.

Then came a JCB Fastrac 3185 that was also in solid working condition that sold for £17,000 grade 9.5, while a 2012 Deutz Fahr Agrotron M620 fitted with front weights that was in similar condition went on to sell for £15,000 grade 9.7.

In great condition was a 2014 Kubota M110GX that was fitted with a LA1954 front loader it made £17,000 grade 10, while the best of the Massey Ferguson tractors on offer was a 6480 that dated from 2006. This example managed to sell for £20,500 in a good grade 10 condition, while a 5465 from

This 2014 New Holland T7.200 was in great condition. Fitted with front linkage it sold for £23,500

2005 wasn’t too far behind when it sold for £16,000 grade 9.8.

Other MFs of note included a 6465 from 2004 Massey Ferguson 6465 that sold for £14,500, as did an undated 4365 that was in equally good condition.

In fact there were several Massey Fergusons on offer which ranged from working tractors in good condition to much older machines that were ready for preservation or had already been restored. Here an undated 6150 that was in good order overall made £8,000, while a 1992 MF 3635 managed to sell for £6,500. Having an older feel were a few 135s, the most expensive of which sold for £6,000 while a Massey Ferguson 185 in original looking condition went for £5,750.

It was a similar story with the Fords that went under the hammer. Here a restored 7610 from 1990 that was in great condition and ready for the rally field sold for £13,000 while another Ford four-wheel drive sold for £11,000.

There were three Countys in the action too, with one certainly needing a lot of restoration work while the other two did look to be in more solid condition. The best was an ex Canadian 764 which had been hawked around other sales first and it sold for £7,750 grade 2.

All in all it was a varied sale, with several older tractors on offer alongside their more modern counterparts, with prices adjusting accordingly.

The most expensive New Holland in the sale turned out to be this 2012 New Holland T6.150 that came with a NH 740TL front loader. It sold for £26,000

In great shape, this 2017 Valtra T174e Versu was a popular lot and went on to sell for £36,000

In very good condition, this 2017 Valtra N134 managed to sell for £24,500

The best of the Case tractors in the sale was this 2016 Puma 160 CVX that was fitted with front linkage & pto. It was sold for £29,000

The only JCB Fastrac in the sale was this 3185 that was in good working order overall, and went on to sell for £17,000

What a line-up of tractors were to be seen at the late Tony McGovern sale, with the ex-West Waste, Ruislip 65 Mk2 nearest the camera

Some £22,000 was paid for the 1987 Ford 7610 II with 4,089 hours and a replacement block

1986 MAN 30.331 was the star in the McGovern sale and sold for £120,000 a massive record again

HUGE RECORDS

On Saturday 21 September it looked like the whole of Ireland had descended on Berry Farm, Stoke Poges, Slough, Berkshire for the well run and promoted Commercial Vehicle Auction’s late Tony McGovern dispersal sale.

Tony came from a farm in County Leitrim, Republic of Ireland to the UK when he was just 17. He started as a labourer and then a lorry driver, where he delivered ‘man huts’ to road repair sites. Together with his brother Peter they started a haulage business in 1967, which with their hard work and contacts just grew and grew. They ended up with their own waste site, which was taken over by HS2. The business was sold in 2018, but by then they had an impressive fleet of preserved lorries and tractors. Thanks to Tony’s manager Danny Lynch, they were taken to many shows in the UK, including Tractor World, where they were prize winners. People like myself also always appreciated their hospitality unit and was always made very welcome.

The place was just packed, and saw the HCVS London to Brighton Run 2024 overall winner, the 1973 Scania 110 super, sell for £100,000 (no VAT) and the 1975 Glenfiddich 1975 Scania 111 raise a little less at £97,000. The 1988 Scania R142M 6x2 with sleeper cab again sold for £100,000. The big number was the 1986 MAN 30.331 8x4 bulk container with new cab and chassis, which Tony never saw completed as he passed away in January,

which sold for £120,000 – yes you did read that right. There were another 17 preservation lorries, which made good money, as did most of the spares.

In the implements section, the well restored Ferguson earth scoop went for £700, and the 3 ton Ferguson tipping trailer, with all new wood and more, grade 5, sold for £2,400. As for the 13 Ferguson and Massey Fergusons, they made great money. The 1965 Massey Ferguson 135 DIY303, with old buff log book, which had been restored by David Marshall from Omagh, sold for a remarkable £19,000 in grade 4.7 condition. As for the 1962 MF 65Mk2 in good condition, again that was yours for £10,500, with no VAT to pay on any of the lots mentioned. Some £13,000 was paid for the 1964 MF 35X with 4,838 hours, which Tony had purchased restored in 2015 with no log book. As for the eight grey Fergusons, the first, in 4.8 condition, was a 1955 Ferguson TE-D, which had previously been ‘Best Ferguson’ at the November Newark Vintage Tractor Show and sold for an excellent £6,500.

All in all it was a hell of a sale, with a David Marshall restored 1972 David Brown 996 selling for an amazing £28,000 near the end of the tractor section.

Congratulations to Jonny Earp and his CVA team and to everyone else for giving Tony a wonderful send off like this.

WHAT’S NEW

NEW 2025 FARMALL C MODELS

The next chapter in the legacy of Case IH's Farmall tractors begins with the 2025 Farmall C models, a bold leap forward that delivers not only a fresh look but also significantly enhanced performance and cutting-edge precision farming technology.

For 2025, Case IH Farmall C tractors deliver customer-driven innovations that improve every aspect of the farming experience. The 24-speed ActiveDrive 2 (Hi-Lo) transmission in all models ensures smoother shifting and exceptional control, while the increased hydraulic pump capacity of 82 l/min translates into faster loader cycle times and more efficient operations. Additionally, the newly introduced ActiveClutch feature allows the tractor to be held on the brake pedal without requiring the clutch, making it ideal for front loader applications.

From the 90C to the 120C, farmers will experience a new level of control, efficiency, and comfort, all while benefitting from precision technologies once reserved for larger, more advanced machines. Farmers can tackle even the most demanding tasks with

confidence, knowing that their equipment is built to perform under pressure.

At the heart of this evolution in technology and design is a commitment to operator comfort. Long days in the field demand tractors that not only work harder but also make the job easier on the operator behind the wheel. A six-post cab offers superior visibility, while the repositioned exhaust

maintains the open, unobstructed view farmers have come to appreciate. While driving models specified with the optional new cab suspension system, the operator will immediately notice the difference in comfort. Further enhancing the operator experience are the newly installed LED lights, which ensure clear vision during early mornings, late nights, or long road journeys between

fields. The increased diesel capacity of 130 litres allows for longer operation times, while the new tank design provides greater ground clearance. The modernized digital instrumentation and adaptive lighting in the cab create an intuitive, high-tech environment that feels as advanced as it performs.

Case IH knows that today’s farmers are more data-driven than ever, and the 2025 Farmall C models meet that need headon. With optional factory-fitted telematics available in standard and advanced packages, farmers can now benefit from real-time geo-location, machine monitoring, and wireless file transfer – technology that puts vital operational data at their fingertips, whether in the cab or remotely on a mobile device. This precision is further enhanced with the availability of hydraulic auto guidance, powered by the Case IH Pro 1200 monitor and Case IH VectorPro receiver. This system ensures centimetre-level accuracy, reducing overlap and improving efficiency, even in the most complex field layouts.

Case IH has engineered a suite of intelligent headland management solutions, streamlining operations so farmers can focus more on their fields and less on machinery adjustments. The Auto pto feature automatically engages and disengages during headland turns, making transitions smoother and less labour-intensive. Paired with the Auto Differential Lock, which disengages the front and rear differentials when the rear lift is raised and re-engages them when lowered, the system provides seamless operation during headland manoeuvres, minimising soil disruption and increasing efficiency. The newly designed front pto, now equipped with a wet clutch, offers quieter and more efficient operation. An increased gross vehicle weight of 7,000kg and an upgraded rear lift capacity of 4.7 tons mean heavier implements can be utilised, providing greater versatility. Larger rear tires (up to 540/65 R38) further improve traction and flotation, helping to minimize soil compaction and enhance yield potential. Further developments across other models in the Farmall C lineup will follow in 2025.

OWNER-INSPIRED UPGRADES

Polaris Off Road has launched a range of owner-inspired upgrades to its class-leading full-size Ranger lineup. Building on the already best-selling side-by-side, the 2025 Ranger lineup features a redesigned front end and new front bumper for added robustness, an upgraded Gen 2 transmission for smooth and consistent shifting, and intuitive accessories for added rider convenience and an immersive ride experience.

In addition to the new upgrades, the 2025 full-size Ranger lineup continues to provide the features riders have come to expect from Polaris, including class-leading 454kg box capacity and 1,136kg towing to carry large loads in fewer trips, maximising overall productivity, as well as on-demand All-Wheel Drive (AWD) that automatically engages four-wheel drive when traction loss is detected for confidence in rough terrain, and reverts back to two-wheel drive when traction is regained.

The latest Ranger lineup is Polaris’ most comfortable UTVs to date with the option of adding a full cab, complete with roof, tip-out windshield and wiper, rear panel, crank doors and in-cab heater. Full cab accessories for Ranger allow riders to seal out the elements and extend their work day.

Setting the bar for owner-inspired upgrades and class-leading capabilities, the 2025 Ranger XP 1000 now features a

restyled front end with new bumper and grille for added durability, along with upgraded transmission for 50% easier shifting, upgraded electric power steering system and longer service intervals. On tractor-homologated models, power has been increased along with rider-selectable throttle control settings. New for 2025, XP 1000 features a number of rider comfort upgrades, including redesigned cab nets for easier entry and exit, and integrated speed limiting features. The 2025 Ranger XP 1000 models come in two colour choices – Blue Slate or Polaris Pursuit Camo – as well as Nordic Pro edition in Black Pearl which features an in-cab heater and Polaris HD winch fitted as standard.

The new and improved 2025 Ranger 1000 models continue to enhance performance and durability, setting a strong foundation for the 2025 full-size Ranger lineup. In addition to the upgraded transmission, longer service intervals and redesigned cab nets, the Ranger 1000 Nordic Pro Edition now comes standard with ultra-bright LED headlights. Available in Granite Gray and Nordic Pro Edition in Black Pearl.

To round out the lineup, Polaris updates its Ranger Diesel model with a new look. Both the standard diesel and diesel deluxe models have a restyled front end design and bumper for even more durability, along with ultra-bright LED headlights.

John Deere and DeLaval have launched the Milk Sustainability Center, an innovative digital ecosystem designed to enhance the efficiency and sustainability of dairy farming operations. With the dairy industry facing evolving sustainability standards and stricter regulations, the Milk Sustainability Center can integrate data on crop and animal performance into one unified platform.

Developed through a joint effort initiated in September 2023, the Milk Sustainability Center data empowers farmers to optimise their operations, reduce their environmental impact, and continue to meet the growing demands for sustainable practices in dairy farming.

Dairy farmers can use the Milk Sustainability Center to monitor nutrient use efficiency and carbon dioxide equivalent across their farm, herd and fields. It collects animal and crop data, providing insights to help farmers manage nutrient utilisation effectively and reduce the need for manual data input. Farmers can also invite their consultants, dealers, vets and other partners to access the platform.

The Milk Sustainability Center is designed to serve dairy farmers regardless of the brand of farm machinery, milking equipment

JOHN DEERE AND DELAVAL LAUNCH GROUNDBREAKING MILK SUSTAINABILITY CENTER

or herd management software. It is now available as a free version to a select number of dairy farmers in the USA, Netherlands, and Germany, with plans to expand to other European countries soon. Users will be added steadily before the full release. Dairy farmers in the UK and Ireland can join the waiting list at www.milksustainabilitycenter.com to be among the first to benefit.

The Milk Sustainability Center is a cloudbased solution accessible on both desktop and mobile devices. It is developed and powered by Dairy Data Warehouse BV (DDW), a Dutch company with 11 years of experience in providing data solutions for sustainable dairy farming.

Alexander Berges, Production System Manager at John Deere said: “The Milk Sustainability Center is designed to help dairy farmers meet their goals and address the growing demands from dairy processors, retailers, government, and consumers. The future addition of the benchmarking and

recommendations functionality will help farmers be more profitable while improving their sustainability.”

Lars Bergmann, Executive Vice President of Digital Service at DeLaval, explained: “Dairy farming involves using multiple, unconnected software solutions. The Milk Sustainability Center links these different systems into one platform. This integration reduces the need for manual data entry and provides farmers with a comprehensive view of their farm’s sustainability. The tool helps identify where farmers can save money and improve their sustainability efforts by highlighting nutrient losses and offering recommendations for reduction.”

The Milk Sustainability Centre welcomes partners to join its mission to provide farmers with the comprehensive data and insights needed for a holistic view of the efficiency and sustainability in their dairy operations. For more information, potential partners can contact inquiries@milksustainabilitycenter.com

FUTURISTIC FARMING

Produced in Kent members were treated to an exclusive demonstration of some of the newest, most innovative tech in the farming world at their most recent members’ event held in August 2024. The event showcased groundbreaking innovations in robotic soft fruit picking technology, for some of the county’s growers and producers.

The event featured live demonstrations of the latest advancements in agricultural robotics designed to revolutionize soft fruit picking. Attendees witnessed a working demonstration of how the strawberry harvesting robots work with the table-top growing systems widely used around the world.

Dr Duncan Robertson from Dogtooth Technologies demonstrated the technology and opened the event with an introduction to the robotic technology and how it has been developed.

"We are thrilled to showcase cutting-edge technologies that promise to transform horticulture," Dr Robertson stated. "By harnessing the power of a combination of low-cost harvesting robots and state-of-the-art AI control systems, we can help to ensure a sustainable future for horticulture, and support our farmers in their efforts to provide consumers with fresh, high-quality produce."

Dogtooth Technologies have been working closely with UK growers and developing commercial robotic harvesting solutions

since 2016. In terms of productive output, their latest generation robots are increasing, comparable with human pickers. The robots use autonomous navigation along crop rows, locate and pick the ripe fruit, and use on-board quality control – grading picked berries, placing them directly into punnets according to supermarket criteria. While robotic fruit pickers are not without challenges, such as high initial costs and the need for technical expertise, their benefits in terms of efficiency, precision, and sustainability make them a valuable asset in modern agriculture. Many agricultural

sectors face seasonal labour shortages, particularly since Brexit, with some farmers reporting crops being left to rot as they did not have enough pickers. Robotics can help fill this gap by providing a reliable workforce that is both efficient and accurate and offer a range of new and exciting roles. Feedback from attendees has been overwhelmingly positive, with many expressing excitement about the potential of these technologies to revolutionise the agricultural sector. The event has sparked new collaborations and discussions about the future of farming in Kent.

NEW RANGE OF XGT CHAINSAWS

Makita has expanded its impressive chainsaw collection with the launch of the UC022G, UC024G, UC025G and UC026G 40VMax XGT Rear-Handle Brushless Chainsaws. As part of Makita’s powerful XGT series, the new chainsaws combine power, efficiency, and convenience for effortlessly tackling cutting tasks both large and small.

All the new models are built on Makita's advanced 40VMax XGT platform to deliver robust performance and extended runtimes and each have been manufactured with the same body and motor design. The key differences between each model sits with the choice of chain bar lengths that are available – the UC022G at 350 mm, the UC024G at 300 mm, the UC025G at 350 mm and the UC026G at 400 mm. Furthermore,

the UC022G doesn’t require any tools for chain tensioning thanks to the easy operable handle for tool-less adjustment, whilst the UC024G, UC025G, and UC026G utilise captive bar nuts.

At the heart of the new chainsaws is a high-powered brushless motor that generates an outstanding 1.6kW of maximum output power that is comparable to 35cc two stroke petrol chainsaw. This impressive speed allows the blade to cut through the thickest branches with chain speeds up to 25.5m/s.

Operators will enjoy the improved trigger response rate that provides acceleration from ‘Trigger On’ to full speed in under one second. Furthermore, should the chain lock due to load, the tool is able to restart immediately upon removing the blade from

the load, without the need to retrigger, making it possible to resume cutting operations straight away.

As users would expect from the leading power tool manufacturer, Makita has included several thoughtful features into the design of these machines. Each has a highly visible felling line as well as an onboard automatic oiler with an adjustable flow rate. For user comfort and optimal handling, the models are equipped with an ergonomic soft grip that reduces vibration and fatigue during prolonged use. Their lightweight design further improves manoeuvrability and control, making them easier to handle in various cutting conditions, and safety features include a chain brake for added protection against kickback as well as a protective hand guard.

A dynamic new web application has been designed to enhance health risk management for beef and sheep farmers and their vets.

Developed by SRUC’s Veterinary Services team and funded by the Scottish Government, HerdPlan empowers farmers and vets to collaboratively create proactive health plans, efficiently and in an organised manner, ultimately enhancing productivity and increasing farm income.

Herdplan revolutionises health planning by moving beyond traditional paper methods. This new online tool allows the entire farm team – including farm staff, vets, nutritionists, and other advisors – to work together efficiently on health planning and conduct regular risk reviews. By ensuring vaccination strategies, infectious disease protocols, biosecurity measures, and other important tasks are prioritised and updated in realtime, HerdPlan enhances overall health risk management.

NEW HEALTH WEB-APP TO IMPROVE FARM PRODUCTIVITY

HerdPlan also simplifies compliance with health plan requirements set by Red Tractor and QMS, ensuring that nothing is overlooked in the approval process. It facilitates vet’s approvals, antibiotic reviews and other health and welfare assessments, making it easy for both farmers and vets to meet necessary standards and that all requirements are met.

Dr Foteini Manolaraki, Animal Health Planning Development Manager at SRUC said: “HerdPlan lets you respond to real-world challenges as they arise. Implementing new health protocols into your plan as they are needed, it ensures that your entire team is always aware of the latest farm health information. By prioritising prevention over cure, HerdPlan ultimately keeps more money on the farm and ensures that essential tasks are completed on time.”

NEW GENERATION OF HORSCH PARTNER FRONT TANK

Farmers can combine the Horsch Partner FT hoppers with its extensive range of mounted drills and implements to create flexible and versatile seeding systems.

The existing Partner FT line-up is joined by new models. A double-tank 1,600 litre option now joins the existing single tank, there are new double-tank models with 1700 litre and 2,100 litre capacities and a triple-tank model with 2,500 litres. These are Partner 1.7 FT, 2.1 FT and 2.5 FT respectively and provide farmers with even greater flexibility when applying one or more components.

COMBINED WITH MOUNTED DRILLS

The Partner FT can be combined with seed drills, used for tillage for deep fertilisation, in hybrid farming with Transformer VF or a Cura ST or in combination with a Finer SL. Combining the drill with a Partner FT front

tank optimises the weight distribution of the tractor and seeding rig.

Farmers can have several mounted drills to create a highly flexible system. The 6m Avatar 6.25 SL and Sprinter 6 SL offer direct and min-till seeding, the multi-talented Taro 6 SL and the Express KR for an intensive seedbed preparation. The single-grain Maestro RV and RX models feature an 8-row mounted unit with one seed tank per row. The Finer SL excels at shallow weed control and adding the seeding kit easily converts it to an excellent wet weather drill.

NEW GENERATION

The Partner FT is now equipped with the new I-Manager operating system, which has impressed the customers in the Pronto, Versa and Avatar lines.

New packer options distribute the weight

on the front of the tractor to reduce tracks and minimise soil compaction.

The Horsch Partner support kit for pneumatic piping is available for the existing front hoppers and is compatible with the new models. The kit consists of an adjustable attachment arm that can be positioned for height and attachment angle depending on the tractor.

The new Horsch quick couplers offer timesaving, tool-free operation when coupling the pneumatic hoses of the mounted implements to the front tank.

In 2024, Horsch started a small pre-series with the new Partners. In 2025, the new lines will be available in addition to the existing front tanks.

THE NEW CLEMENS S-REX DIRECT DRILL

Sowing a cover crop in a vineyard is one of the most talked about solutions, and can bring about significant benefits to the soil structure, improved water filtration and vigour management. Planting a cover crop at the beginning and end of the year comes with its challenges – especially with the volume of rain over the last year. This is where the brand-new Clemens S-Rex drill helps you get those seeds planted at the right time.

The new product from Clemens was conceived and designed in the UK by two vineyard owners who couldn’t find a machine to suit their requirements – namely to sow seeds and apply liquid fertilisers in one pass, in difficult soils. The drill has been built with vineyards in the UK at the forefront of its designers’ minds, so not only is the UK the first market to have access to it – it will prove an ideal solution for the vast majority of them as well.

The S-Rex is 1.4m wide and uses the APV pneumatic seeder unit with electronic fan, the well-known Metcalf direct drill tine to plant the seeds and then a roller to press the soil around the seed to help germination. Each drill is supplied with two seed rollers to suit seeds of all sizes – perfect for those cover

How do you go about improving your soil in your vineyard? asks Matt Pinnington, Haynes Agricultural.

cropping with wildflower mixes. The seed is placed in behind the tungsten tipped tine at 5mm-10mm depth depending on seed type. Each tine can be preceded by a leading disc, to open a slot for the seed in an already established sward or crop without tearing it up. The tine can be used without the disc if the soil conditions allow.

The drill uses 12mm or 100mm tines to create the slot in which the seed is placed, allowing it to overcome the stoniest of soil types and conditions. The tines also produce a small amount of tilth below the top of the slot which gives the seed the best environment in which to germinate. Each tine also features a hardened face and shear bolt stone protection to counter even the biggest ‘Hampshire diamonds’.

The last stage is the full width roller, which is hydraulically adjustable and toothed to effectively ‘pinch’ the slot closed behind the tines and so ensure good seed to soil contact.

A feature not seen on other vineyard direct drills is the optional liquid fertiliser tank – controlled from the tractor cab. This

injects a steady stream of fertiliser down the back of the seeder tine to ensure that the planted seed has the best chance of swift germination. Biochar, compost teas and other biological products can be applied at seeding or subsoiling time if the soil conditions demand it.

Subsoiler legs are also available as an option – they simply bolt on to the existing frame. With the subsoiling option the drill can be used to effectively crack the pan and reduce compaction, aiding drainage and promoting healthy root growth. Liquid fertiliser can be applied at the same time as subsoiling.

A significant benefit of the Clemens S-Rex drill is that a cover crop can be planted in one pass only. There is no need to terminate an existing crop, pre cultivate or power harrow to create a seedbed, the S-Rex can sow the seeds in one pass reducing wear and tear on the tractor, reducing compaction and soil damage at critical times of the year.

The Clemens S-Rex drill is available for demonstration and purchase across the south from Haynes Agricultural.

• NEW for 2025 Outdoor Vintage Autojumble on Sunday

• Large vintage auction of over 100 tractors and 1500+ lots courtesy of HJ Pugh

• Hundreds of vintage and classic tractors, vans, model displays and stationary engines on display

• Classic commercials drive in day on Sunday

• Even more indoor displays in the NEW Kildare Hall

• Over 100 trade stands in attendance plus a huge selection of vintage tractor parts

INNOVATIVE FEATURES

Claas has raised the bar even higher in terms of chopping quality, efficiency, reliability and comfort with the introduction of several new technologies for forage harvesters. Jaguar customers can now take advantage of new options such as the V-Flex chopping cylinder and CSPS analysis via Claas connect, as well as various improvements to the crop flow and drive provided as standard.

The latest Jaguar forage harvesters from Claas embody over 50 years of operational and customer experience with over 46,000 machines now sold worldwide. A legacy that demands systematic foresight, uncompromising customer focus and continuous technological advances. To honour our commitment, Claas has developed a range of market-ready innovations for the Jaguar 900 series to make forage harvesting even more efficient, cost-effective and convenient for our customers. Feedback from

pre-series customers working in particularly challenging conditions confirms that these new solutions provide impressive added value for customers.

Innovative new features for the Jaguar from Claas set new standards for added customer value in terms of productivity, economy and comfort.

The completely redesigned V-Flex cylinder marks a new milestone in chopping cylinder technology. Available as an optional alternative to the V-Max chopping cylinder, it offers unrivalled versatility when it comes to knife configuration. Together with the new V-Flex knives, it sets new standards for smooth running and knife service life. In addition, it enables high throughputs and further enhanced chopping quality.

Until now, Claas Jaguar forage harvesters have operated with the tried and tested V-Classic (Jaguar 800) and V-Max (Jaguar 900/900 Terra Trac) chopping cylinders. With

the launch of the V-Flex, another optional cylinder is now available for the Jaguar 900/900 Terra Trac series. The new design with optimised V-angle and the new V-Flex knives enable this chopping cylinder to achieve higher throughputs while at the same time reducing the noise level and ensuring smoother running. Crop flow is noticeably more consistent, especially for chop lengths over 12mm. High knife stability and the triple bolted connection also means that the distance between the cylinder and the shear bar can be reduced to achieve even better chopping quality. All these improvements also deliver greater efficiency: with further reductions in fuel consumption per tonne of throughput.

The new V-Flex chopping cylinder offers unparalleled versatility for all applications and chop lengths with a full and half set of knives as well as half-knives.

The V-Flex chopping cylinder is available in four versions with 20, 24, 28 and 36 knives

and can be configured with a full set of knives, or half or one third the number of knives to extend the length of cut, or with a half knife set. With the V-Flex 36, for example, this enables a flexible configuration with 36 knives in full-knife mode, 12 knives in the one-thirdknife mode, 18 knives in the half-knife mode or with the new variant with 36 half-knives to double the length of cut for optimum crop flow and outstanding chopping quality. The V-Flex 20, 24, 28 and 36 therefore provide a unique, universal length-of-cut range from 3.5mm to a maximum 53mm. All chopping cylinders can be used for harvesting maize in combination with the MCC Classic and MCC Max as well as the MCC Shreadlage corncrackers.

NEW V-FLEX KNIVES

The newly developed and patented knives on the V-Flex chopping cylinder are angled at 10 degrees to the shear bar for outstanding precision and agility. The extended 2mm thick anti-wear coating makes the knives extremely robust and wear-resistant in all conventional chopped forage crops. This significantly extends the service life of the knives based on throughput, which further optimises process costs in the forage harvesting chain for farmers and contractors.

Riveted accelerator paddles ensure uniform crop intake. Available for grass and maize, the V-Flex knives are fastened to the highly wear-resistant base with three bolts and corresponding clamps (half knives: two bolts and clamps per knife). The predefined position of the knives on the chopping cylinder makes for fast knife changes as there is no need to align the knives with the shear bar.

The newly developed V-Flex knives feature several outstanding improvements in terms of wear protection, throughput and smooth running.

Claas has reconfigured the knife sharpening operation to make it even more user-friendly. In addition to the control options 'knife sharpening' and 'individual shear bar adjustment', operators can now select one that is even more convenient; knife sharpening and shear bar adjustment combined can be completed in just one minute for pre-determined sharpening

cycles – at the touch of a finger in Cebis. The sensor-based shear bar adjustment has also been optimised. A status display showing the process time, status description and visualised process is now available in Cebis for all sequences. This enables operators to better estimate downtimes and make optimal use of waiting times. As before, the sharpening interval can be pre-programmed according to time or throughput based on the Quantimeter throughput readings.

CLAAS CORNCRACKER

For years the Claas Multi Crop Cracker concept (MCC) comprising the MCC Classic, MCC Max and MCC Shredlage has offered the widest choice of corncracker options for highly efficient processing of kernels, leaves and stalks from short cut to long cut and Shredlage®. For more intensive kernel processing, the differential speed has now been increased from 30% to 40% in the MCC Classic with sawtooth profile and the MCC Max with unique ring segments with cutting and shearing effect. Furthermore, the MCC Classic is optionally available with a 190-sawtooth profile for particularly small kernels such as sorghum.

The maintenance compartment now offers more space for fitting and removing the corncracker, making it easier to change the rollers. Less downtime during campaigns means more time for harvesting.

The MCC Classic and MCC Max now work with a speed difference of up to 40%, and the MCC Classic is also available with fine gearing. Thanks to the larger maintenance space, installation and removal of the corncracker module is quicker and less stressful.

DETERMINE PROCESSING INTENSITY IN THE FIELD

The CSPS value (Corn Silage Processing Score) is an important indicator of kernel processor performance. Previously, this could only be determined in the laboratory. Now for the first time, Claas can offer a solution for farmers and contractors in the form of an app in Claas connect which calculates the CSPS in a matter of minutes in the field while harvesting is underway.

To calculate the scores, a litre sample of chopped material is collected and divided into a minimum of five individual samples on a blue plastic A4-sized tray that comes with the test kit. The samples are then photographed with a smartphone and transferred to a server for analysis. The results are sent back to the smartphone a few minutes later –enabling the settings to be adjusted on the corncracker while harvesting is underway. This makes it possible to consistently maintain the desired or required processing quality, and is especially useful for contractors having to meet customer requirements.

What previously required a laboratory can now be done directly in the field during the harvest: determining processing intensity using the app in the new Claas connect.

PICK UP 300

When it comes to the Pick Up 300, the shape of the auger has been optimised in the middle and equipped with four offset paddles. This ensures even more uniform crop flow, which in turn has a positive effect on throughput. The flat or toothed cover or wear plates on the paddles are easy to replace.

The extended dust screen now covers the entire working width of the Pick Up. This reduces soiling in the intake and cylinder housings and on the windscreen, as well as effectively capturing crop fragments and alfalfa leaves, thereby avoiding harvest losses.

CULTIVATE A GENERATION

Kramp has announced that its Cultivate a Generation grant scheme supporting farmers, agricultural engineers, and students will continue into 2025.

There are seven grant categories: engineers, arable farmers, livestock farmers, young farmers, small and large contractors, and family support. Winners will be drawn monthly throughout the year.

Kramp will add £10,000 to last year’s amount, meaning £40,000 is available in 2025. This will be topped up further using the proceeds from Kramp’s LAMMA stand.

“The Kramp shop at LAMMA is there to show farmers the range available to them when they visit a dealer supported by Kramp’s retail offer,” said Des Boyd, sales director at Kramp UK.

“We’re pleased to make our LAMMA shop not-for-profit by donating the proceeds to our Cultivate a Generation grant fund.”

In total, 44 grants will be awarded in 2024 from 400 applications. Reflecting on the success of Cultivate a Generation in its inaugural year, Des has been delighted by its impact on the successful applicants.

Bayley Anderson, an apprentice engineer from Cambridgeshire, secured an agri-engineer grant in April.

“I was really thrilled when I heard I'd won and excited too,” said Bayley. “I’m fairly new to the industry and am currently saving for a decent air compressor for my van. These winnings will go towards that. But more importantly, Kramp has contributed to my future, and I can’t thank them enough.”

Another grant winner in 2024 is Isabel Verey, who won the young farmer category in February. She is 20 years old and is currently in the process of taking over the family farm from her father. The farm comprises 40 suckler cows and their calves, plus a few followers and a livery yard.

Isabel is working hard to diversify their income streams following the decline of BPS and applied for the ‘Young Farmer’ category, hoping some winnings would allow her to implement some of her ideas.

“Initially, I was really surprised when I heard I had won, but it soon sank in and felt great,” said Isabel. “As water is one of our biggest issues on the farm, I have been thinking of ways to alternate the grazing areas of our livestock whilst fixing drainage. The money went towards fencing and water management and helped me show my parents that my ideas work!”

For more information about whether you qualify and to apply for a grant, visit: www.kramp.com/shop-gb/en/l/cultivate-a-generation

Bayley Anderson Isabel Verey

48

WHAT’S NEW

SUCCESSION ‘BITESIZE GUIDE’

Succession planning and overcoming barriers for next generation farmers are tackled in a new, free online publication from Nuffield Farming Scholarships and the Royal Agricultural Society of England (RASE), supported by the Elizabeth Creak Charitable Trust.

The 24-page, easy-to-read booklet – Young people and succession planning – Overcoming barriers for next generation farmers; A Bitesize Guide highlights key findings from seven Nuffield Farming Scholar reports.

Nuffield Scholar and RASE Head of Technical Development Stephen Briggs said: “Succession is a subject which is often thought about, but can be challenging to discuss and difficult to put into practice. The guide tackles different areas as eleven ‘Talking points’, looking at the processes, thoughts and practicalities of succession and bringing in the next generation of farmers.”

Each year, 20 people under 45 are selected as scholars and sponsored by the Nuffield Farming Scholarships Trust to travel, research and report on subjects they are passionate about and which contribute to advancing farming, food, horticulture, and rural industries.

Stephen said: “The Scholars who have contributed to this guide have each spent more than eight weeks travelling across the world looking at this issue, and their reports are thought-provoking, full of great case studies and practical recommendations. This new Bitesize Guide pulls together their key thoughts, and makes it very easy to access their reports for more information.”

Rupert Alers-Hankey, Director of the Nuffield Farming Scholarships Trust said: “Few farmers are aware of the huge knowledge base that can be accessed via the Nuffield Farming library, and for those who are, finding the time to read large reports may be impractical. This Bitesize Guide is a great way to highlight the reports and make them more accessible.”

Stephen added: “We are pleased that AHDB is supporting this new Bitesize Guide by including it as a resource available as part of its upcoming farming succession meetings, and we would be delighted

YOUNG PEOPLE AND SUCCESSION PLANNING

Overcoming barriers for next generation farmers; A Bitesize Guide

to see it being shared and used by any other farming organisation or related business.”

Download Young people and succession planning – Overcoming barriers for next generation farmers; A Bitesize Guide: www.rase.org.uk/reports/

TRIMMER STANDS POLES APART

The new cordless 40VMax XGT UN001G Brushless Pole Hedge Trimmer from Makita provides a lightweight and powerful option for cutting thick branches. Its performance capability comes from its 40Vmax XGT Li-ion battery and thick shear 600mm blade. In addition, professionals will appreciate smart, practical features that include an adjustable blade angle as well as a reverse function to clear jams.

One of the latest additions to Makita’s growing and reliable outdoor range, the XGT UN001G Pole Hedge Trimmer has been specifically designed for heavier load applications. Featuring a sharper three-facet obliquely ground blade (double sided rough cut type), the UN001G provides up to 4,000 cutting strokes per minute. With its 3-speed design, the trimmer offers an impressive maximum cutting diameter of 20mm. The

angle of the head can be adjusted in six steps between 45° upward and 70° downwards. A new lock-off lever mechanism has been added as an additional safety feature and the machine also features an auto power off function to prevent accidental start-up if is left unused for a period of time.

Furthermore, the tool is significantly lighter than other trimmers currently available on the market at just 4.7kg5.9kg, which means cutting thick branches overhead is made easier and more convenient. The inclusion of a grease nipple and the fact that oil can be supplied with a grease gun, without removing the bolt on the oil supply port, makes maintenance hassle free. Finally, when not in use, it can be folded down for easy transport and storage.

“The UN001G Brushless Cordless Pole Trimmer represents everything Makita is known for: performance and quality,”

explained Kevin Brannigan, Marketing Manager at Makita UK. “It is IPX4 compatible and has been designed to help professional landscapers and grounds maintenance teams to tackle thick branches, even at height, with ease from ground level. Efficient and effective, it’s another high-performance addition to our expanding 40VMax XGT range.”

GROWING YEAR ON YEAR

Unveiled by Vineyard magazine in 2021, this celebration of UK vineyards, growers, winemakers and wines has grown year on year, with more stands, more features, more opportunities to do business and, of course, plenty of great wines to sample.

Organisers this year took the brave decision to add a third hall to the show, held at the Kent Event Centre in Maidstone, and were rewarded by an impressive uptake from exhibitors, with the result that visitors will be able to chat to representatives from around 130 different companies at this year’s event.

From viticulturists to label designers and from machinery dealers to specialist equipment manufacturers, the Vineyard and Winery Show will bring together a huge range of suppliers, advisers and potential collaborators.

“We increasingly hear from people who have done real business at the show,” commented Vineyard publisher and show director Jamie McGrorty. “They chat to like-minded people, discuss ways of working together, come up with plans and do deals, all in the friendly and supportive atmosphere the show generates.

Like a fine wine, the Vineyard & Winery Show has developed and matured over the years – and after four years in the cellar, the 2024 event on 20 November promises to be something really special.

“We are also expecting a number of product launches again this year, and the wide range of exhibitors, seminars and professional help on offer under one roof makes this year’s show the place to be for anyone connected with this industry.”

At the heart of the show, of course, is the wine, and there’s no shortage of that as the UK continues to produce wines that rival the best in the world, particularly when it comes to the sparkling variety.

This year’s innovations include a new approach to the ‘wine hubs’ that have proved so popular in past years by giving visitors a chance to sample some of the best vintages produced in the country.

ONE VINE AT A TIME

For 2024, the hubs have been separated into three distinct areas, providing more focused opportunities to sample wines of a similar type. There will be a hub featuring

WineGB’s Golden 50 wines, another featuring world renowned wine writer Matthew Jukes’ favourite 36 wines from the past year, as featured in Vineyard, and another featuring more than 25 Piwi wines.

“Modern Piwi varietals, with their increased disease resistance, are becoming more and more popular with growers and will be given a more prominent role at this year’s Vineyard & Winery Show,” said Jamie. “Last year’s Piwi wines were predominantly grown and bottled overseas, but this year’s selection is of UK-grown wines, so our visitors will know how they perform in our climate and soils.”

Pattingham Vineyard’s Norton Brook 2022 highlights the rise of Piwi wines, with its 85% Solaris and 15% Siegerrebe blend good enough to have earned it a gold medal in this year’s WineGB awards and a place in the show’s Golden 50 hub.

WineGB’s ‘Golden 50’ wines have been selected from 123 UK wines that have won Gold medals across competitions during 2024, including: Decanter World Wine Awards, IWSC, The Champagne and Sparkling Wine World Championships, Sommelier Wine Awards, London Wine Competition, Sommeliers Choice Awards, Wine GB Awards and the Welsh Wine Awards.

Exhibitors, which will include professionals such as lawyers and accountants as well as big-name machinery dealers, packaging experts and winery suppliers, will fill the John Hendry and Maidstone halls at the event centre along with a temporary – but solid –additional hall built specifically for the event.

“We have been overwhelmed by the response from exhibitors, some of whom will be at the show for the first time having realised what a great opportunity it is to meet growers and other potential customers,” said Jamie. “With things getting busy, we decided to add temporary extra space and were delighted when that was quickly snapped up, too. Rest assured that while temporary, it will be warm, dry and well-lit!”

The 3.15pm wine tasting of Piwi varieties will be curated by Defined Wine and sponsored by Kent-based branding agency Oak Creative. It will be held in the tasting marquee.

With Piwi wines very much to the fore, Italian nursery Vivai will be at the show displaying some of the wines they have produced from bespoke vines grown ‘to order’ based on the terroir and climate specified by the grower and the disease resistance required. After creating the specific vine, Vivai produces a small batch of wine that the grower can taste before buying

2024

20 NOVEMBER 2024 –KENT SHOWGROUND, DETLING

and planting the vines.

Other first-time exhibitors that will add to the buzz around this year’s show include Chichester Farm Machinery, which offers an impressive range of tractors, mowers and ground care equipment, and Willis European, which has more than 50 years’ experience in supplying brewing, bottling and process equipment.

Kreston Reeves will be hosting a seminar breakfast at 8.30am, while the full day’s fascinating seminar programme will feature three talks and a keynote address by Patrick McGrath MW.

With four decades of experience in the wine trade, Patrick passed his Master of Wine examination in 1993 and became managing director of wine distributor Hatch Mansfield a year later. He is also the co-founder of Champagne Taittinger’s English estate, Domaine Evremond.

The seminar programme, sponsored by Ferovinum, will continue with the launch of WineGB’s three-year strategy and a presentation of the organisation’s work-plan by chief executive officer Nicola Bates.

A panel discussion entitled Future Climate Impact on Vineyards: Insights and Updates will be led by Professor Steve Dorling of

Weatherquest and Dr. Alistair Nesbitt of Vinescapes, who will deliver an update on climate predictions and the impact on viticulture.

Communications manager Phoebe French will then talk about the Innovate UK-funded frost project, which began earlier this year, with a representative from Plumpton College providing an update on its work focusing on different grape varieties and frost tolerance.

The final session of the day will focus on sales, specifically the importance of restaurant sales.

The ever-popular Matthew Jukes’ wine-tasting masterclass at 1pm will be sponsored by Gullands, while Orchard Cooling and OnePay are jointly sponsoring free coffee for visitors throughout the day. Refreshments will also be available throughout the event, which begins at 9am and closes at 5pm.

Headline sponsors of the event are Core Equipment, Hutchinson’s, Vitifruit, Autajon, NFU Mutual and VineWorks, while Rankin is again providing the popular visitor bags and Agrii is sponsoring the tasting glasses.

GET YOUR FREE TICKET TO THE SHOW

The Vineyard & Winery Show will be an unmissable event for anyone working in viticulture and wine production in the UK. The show takes place on 20 November 2024 at the Kent County Showground, Detling, Kent.

202

202

Organised by Vineyard magazine and supported by WineGB, it will be an invaluable opportunity for all viticulturalists, winemakers, suppliers and the trade to come together. There will be a packed programme including a series of seminars from WineGB, tastings of the UK’s top wines, lots of machinery and equipment to see – as well the opportunity to network with peers.

To register for your free ticket go to ww.vineyardshow.com

THE SEMINARS

by

WineGB is once again hosting the seminar programme which will take place during the Vineyard & Winery Show on 20 November.

This year, the programme will feature three talks on WineGB’s strategy, frost research and restaurant wine sales as well as a keynote address from a leading industry figure.

Mitch Fowler

Founder

and CEO of Ferovinum

09.10 - 09.20

The programme will be kicked off with a welcome from the seminar programme sponsor.

Keynote speaker: Patrick McGrath MW, CEO of Hatch Mansfield and Co-Founder of Domaine Evremond 09.20 - 09.34

We are excited to announce that Patrick McGrath MW will be delivering this year’s keynote address. Patrick has spent over four decades in the wine trade, working for the likes of Champagne Bollinger, Grant’s of St James’s and Victoria Wine. Having passed his Master of Wine examination in 1993, he joined wine distributor Hatch Mansfield as Managing Director a year later. He is the Co-Founder of Champagne Taittinger’s English estate Domaine Evremond alongside his role as CEO of Hatch Mansfield.

Photo: Thomas Alexander Photography
Patrick McGrath MW and Her Royal Highness The Duchess of Edinburgh at the official Domaine Evremond winery opening

SEMINAR 1 10.00 - 10.30 Delivering for members

WineGB’s three-year strategy and action plan

Nicola Bates

WineGB CEO

Patrick’s talk will be followed by the launch of WineGB’s three-year strategy and a presentation of the organisation’s work-plan by WineGB CEO, Nicola Bates. This follows an extensive member consultation and our first Strategy Day, held at Denbies Wine Estate in September.

SEMINAR 2 11.00 - 12.00 Future climate impact on vineyards

Insights and updates from Innovate UK’s groundbreaking frost project

Professor Steve Dorling

Head of Innovation at WeatherQuest and Specialist Meteorology Trainer with Capita and the Ministry of Defence

Phoebe French

Communications Manager at WineGB

This will be followed by a panel discussion entitled: Future Climate Impact on Vineyards: Insights and Updates from Innovate UK’s Groundbreaking Frost Project. The panel will consist of Professor Steve Dorling (WeatherQuest) and Dr Alistair Nesbitt (Vinescapes) who will deliver an update on future climate predictions and the impact on viticulture. WineGB’s Communications Manager Phoebe French will then provide an overview of the Innovate UK funded frost project, which began earlier this year. A representative from

Dr Alistair Nesbitt

CEO of Vinescapes

Representative

Plumpton College

Ian Beecher-Jones

Founder of JoJo’s Vineyard

Plumpton College will provide an update on its work on behalf of this project, focusing on different grape varieties and frost tolerance. The session will conclude with summary of how digitisation and technology can help vineyards react quickly to climatic events by Ian Beecher-Jones (JoJo’s Vineyard).

SEMINAR 3 14.15 - 15.00

Restaurant bottleneck Do listings matter?

Tim Wildman MW

Owner and Winemaker at Lost in a Field

Simon Huntington

Client Manager at Itasca Wines

Al Thorp

Director of Wines Under the Bonnet

Further speakers to be confirmed

The final session of the day will focus on sales, specifically the importance of restaurant sales. Entitled Restaurant Bottleneck: Do listings matter the panel will discuss how to develop relationships with key on-trade partners and how sommeliers can act as brand ambassadors as well as the challenges and barriers that our industry faces. Joining the panel will be Tim Wildman MW (Lost in a Field), Al Thorp (Wines under the Bonnet), and Simon Huntington (Itasca).

WRI GHT SB RO KE RS ER VI

The safe and reliable way to buy and sell machinery and equipment

Wrights Farming Register offers farmers and contractors a uniqueservice through its team of brokers. They are the ‘men in the middle’ who give an impartial opinion on the items of machinery they handle on behalf of their clients. The brokers, who currently cover an area stretching fromthe Scottish borders to the South Coast, can save farmers time and money when it comes to buying or selling anything from acombine harvester to a cattle trough. In these security-consciousdays, they also provide adiscreet alternative to apublic farm dispersal sale and can help farmersavoid the tax pitfallsthese can cause.

Shaun van den Bos

Tel: 01652 618221

Mob: 07850 978188

shaunvandenbos@gmail com

www shaunvandenbos co uk

Robin Sparrow Tel: 07831 886601

robinsparrow@btinternet com

CONDITIONS CATEGORIES

EXCELLENT Full workingorder,bright andundamaged paintwork, low usagefor year

VERY GOOD Mechanically sound, will go straight to work,little wear for year

GOOD Clean and tidy,mechanicallygood, mayrequireservice or minimal repair

AVERAGE Complete unless stated,normal wear andtearfor age, mayneed somerepairs. Thedescriptions areprovided as aguide only and relate to machine condition when inspected by the broker

AUGERS

S10654 RECO STRAIGHT 4.8M Augers one 3.5 Inch C\w Motor fittedand second one 4.5 Inch with 1.5Kwmotorseparate. Both Single phase Good Condition £200 each %$Shaun 07850$978188

BALERS &BALE HANDLING

RS1603 2006 MASSEY FERGUSON 139 SB BALER

Central 1.9mt Pick Up.Twin Auger Feed,Bale Chamber 42M X37M, 1000RPM PTO, SedgeHitch. Floating Pick Up with Hydraulic Lift, Full road Lighting.Located Nr Kings Lynn. MorePhotos on request.Transport canbe arranged Very Good Condition £9550 o.n.o. %$Robin$07831 886601

S8591 BROWNS JUGGLER Flat S10612 RUSSELL FLAT8 Bale grabsfor conventional balesc\w toprams and loader brackets. Stored inside choiceof2 Good Condition £300 each %$Shaun 07850$978188

S10637 RIVERSIDE RVM150 CardboardWaste baler,3 Phase, Little used storedinside Very Good Condition £2000 %$Shaun 07850$978188

S10639 BROWNS BALE SPIKE Single or Double Spikepicker suitable forloadermounting c\w 4loader bracketsand one unmarked 1m tine.56” Wide Very Good Condition £275 %$Shaun 07850$978188

COMBINE HARVESTING EQUIPMENT

RS1591 1992 MASSEY FERGUSON 38

combine Harvesterc/w 20ft PowerFlowHeader(Droningberg)

Valmet240hp Engine,Tyres 85% good Front 650-75 R32, Rear 500-60 22.5, in good working order,used this harvest, located Nr.Grantham. Morephotoson request Good Condition £9500 o.n.o %$Robin$07831 886601

S10534 ZURN 24 FT rape extension forNew Holland TX headers. Fittedmechanicalside Knivesateach end. Stored in barn Good Condition %$Shaun 07850$978188

S10535 CHEVAL 20 FT Rape extension ForNew Holland Combines. FittedZiegler electric rape knives at each end. Good Condition %$Shaun 07850$978188

CRAWLERS &EQUIPMENT

S10522 INTERNATIONAL

BTD6 Crawler Tractorc\w Hydraulics, PTO, Drawbar & lights.(Nolinkage )Repainted and overhauled by RH Crawford &Sons. Very Good Condition %$Shaun07850$978188

S10541 INTERNATIONAL BTD6

Crawler with 12 inch tracks, very good pins &Sprockets. Drawbar and recently covered seat and armrests.Thistractor has been ashowwinnerand stillhas that quality aboutit. Very Good Condition %$Shaun 07850$978188

CULTIVATION EQUIPMENT

RS1458 FARMFORCE FRONT MOUNTED PRESS 3point linkageFurrow Press, all rings sound. Photosonrequest Good Condition £500 o.n.o. %$Robin 07831$886601

RS1546 SIMBATOP TILTH 7-2MT

WRI GHT SB ROK ER SE

RS1616 SHOTBOLT24F TROLLS

Twenty four inch Rings Hydraulic Folding and Transport wheel. Rings almost as new, Working this spring.Located Near Newmarket Transport canbearranged at cost MorephotosonRequest Good Condition £3750 %$Robin$07831 886601

RS1619 DIABLO24MTROLLS

18” Half Breaker Rings Hydraulic Folding And Transport wheels. MorePhotosonRequest,Located Nr.Newmarket AverageCondition £3500 %$Robin$07831 886601

RS1628 BOMFORD SUPERFLOW

RS1645 HOWARD STUBBLE CULTIVATOR

Working Width 4m t9 tLegs. In good Working order.Used this Harvest. MorephotosOnRequest LocatedNearWarwick Good Condition £2250 %$Robin$07831 886601

RS1649 MICHEAL MOORS 5MT FURROW PRESS

DE-STONERS

RS1126 2000 NETAGCO REEKIE BEDFORMER

12ftWorking Width 13 Tines StraightTines, reversible Points, Metalwork Sound, Paint Poor, no BreaksorWelds.NoDepth Wheels Good Condition £1150 %$Robin$07831 886601

RS1630 SIMBA4.2 FURROW PRESS

65mm CastSteel rings 80% good Hydraulic Folding and Transport wheels, Ring hitch Draw Bar.Located Near Warwick Good Condition £2750 o.n.o. %$Robin$07831 886601

RS1653 BOMFORD 10FT SUPER FLOW

2Row C/w markers. all new Metal. Front or Rear Mount With tractororbedtiller.Ready to go to work. MorePhoto’s on request, transportcan be arranged at cost to be agreed Very Good Condition £1000 o.n.o. %$Robin$07831 886601

S10668 REEKIE 350 SA Trailed Stone &Clod separator,Front clod pushers, onto35or30mm webs,incab electric controls. Good Condition %$Shaun 07850$978188

DISC HARROWS

RS1633 QUIOGNE 4MT

Seed Bed maker.Front Levelling Board. Double Row of Pig Tail Spring tines. LargePacker Roller, followedbysingle rowofPig Tails, FollowedbySmaller Packer Roller.Really Good working order, Only used on Fenland, Dry Stored. Forsale due to semi retirement. LocatedNear Peterborough Very Good Condition £8500 o.n.o.

%$Robin$07831 886601

RS1547 SIMBADOUBLE PRESS 3-5MT Front one Rowoffixed Loosener TinesFollowedbyTwin PressedSteel Packer Rollers, Hydraulic Transport Wheels and End TowDrawBar Very Good Condition £4500 %$Robin 07831$886601

RS1548 GALUCHIO TWIN PACKER ROLLER 5-5MT front Rigid levelling Tines&Twin Cast steel Packer rollersHydraulic Folding &hydraulic transport Wheels. Dry Stored, FenLand Farm. LocatedNr. Peterborough Good Condition £5250 o.n.o. %$Robin 07831$886601

RS1595 SIMBA6MT DOUBLE PRESS

Cast Steel Rings, Hydraulic folding and Transport Wheels, In good working order (one broken ring). LocatedSelborne,Hants)

Good Condition £4500 o.n.o.

%$Robin$07831 886601

22 CastSteel rings 36 inch diameter, Hydraulic end tow transport Wheels. Good tyres Chain Scrapers. MorePhotoson Request.Located Nr Newmarket Good Condition £3250 o.n.o. %$Robin$07831 886601

RS1631 SIMBA6.5MT FURROW PRESS

Single Rowof34X36inch Cast steel Rings, Hydraulic End Tow, MorePicturesonrequest.Located Nr Newmarket Good Condition £3750 %$Robin$07831 886601

RS1635 CONCEPT3MT POWER HARROW

c/w Packer Roller good Tines HeavyDutySelecter-speed Gear Box. LocatedNrBury St Edmonds. More Photosonrequest Good Condition £2750 %$Robin$07831 886601

9Legs and Depth wheels. Paint needs attention. All Metal work good. Morephotoson Request.Located Nr Bury St Edmonds Good Condition£1250 %$Robin$07831 886601

S10552 EDLINGTON CAMBRIDGE Trailed Rolls, Traditional Mother & Pupswith 10ftCentreand 2of6ft 6ins Rolls all fittedwith good 24 Inch Crimp rolls Good Condition %$Shaun 07850$978188

S10595 BLENCH SPRINGTINE 2 Bar front or rear mountable 12ft Wide spring tine cultivator all sound with good tinesand points Good Condition £350 %$Shaun 07850$978188

S10662 VADERSTAD12M Hydraulic folding Cambridgerolls, 22” Crimpswith breaker rings. Well used butstill very usable

AverageCondition %$Shaun 07850$978188

S10664 AGRI WELD 4M ASSIST

“X”Pattern Disc Harrows with 20inch Discs, Very clean, ready to go to work. Morephotoson request.Located Nr Newmarket, Manual Folding,Hydraulic Transport Wheels Very Good Condition £3750 %$Robin$07831 886601

RS1646 RANSOMS HD DISC HARROWS Trailed 3mt Working Width 20 Discs Hydraulic Transport Wheels. No Breaks or Welds, ready to go to work. LocatedNear Warwick Good Condition £2500 %$Robin 07831$886601

S10636 2022 DALBO POWERCHAIN 800

LowDisturbancehydraulic folding toolbar fittedrow of Discs and Subsoiling tinestoWork land before cultivator towedbehind. Adjustable heightdrawbar.Done little work. Excellent Condition %$Shaun 07850$978188

S10666 OPICO6.3MVARI-FLEX Hydraulic folding CambridgeRolls c\w 21inch crimpsand Breaker rings Levelling boards and weight baskets Good Condition £5750 %$Shaun 07850$978188

LowerLinkageTrailed diamond format disc stubble cultivator 8m Working width to appx 5cm, folds to 3m. Under 200 HP requirement. 520 /50 -17 tyres.Can deal with plant debris, weeds and potato haul.Discs still appx36cm. Excellent Condition £35000 %$Shaun 07850$978188

DRIERS

potato ectric

RS1586 CONDOR GRAIN STORE EQUIPMENT To include 2x Horizontal Chain type conveyers 1vertical cup type elevator Record Fan, Laichenbury Cleaner All fittedwith 3phase electric motors.All Steel stair way, c/w side rails to be sold separately Good Condition £1000 Offers %$Robin 07831$886601

WRI GHT SB RO KE RS ER VI CE

RS1599 2019 OPICOMAGNA 20 Q5

Batch Drier Diesel Fired 3phase Electric Done less than 250 Tons from NewC/W 20 TonWet Grain Bin, Auto Feed.MorePhotos on Request.Viewing Highly Recommended, LocatedNear Aylesbury,Bucks. Drier £45,000 Bin £8,000 Excellent Condition £53000 o.n.o. %$Robin$07831 886601

S10500 LAW DENIS DRIER

Outdoor 12 -15TPH Drier, Vertical design appx 40ft tall, 3Phase with oilfiredburner %$Shaun 07850$978188

S10610 TYPHOON PLYWOOD GRAIN TUNNEL

45ftlong 8ftby4ft In 6ft Sections with 10 inch lateral spigotsfitted.Built in sections with topwalkway giving 2ft moreheightfitted rails. Possibly Available with 30 HP Typhoon TC4Cyclone Fanifrequired Very Good Condition %$Shaun 07850$978188

S10655 ALLMET FULL FLOW Grain drier c\w Control panel, Split phase with oil burner.Small model 4.5 TPH Good Condition Offers %$Shaun 07850$978188 S10658 WOOLLEY VFR/0/3 CONTINUOUSFLOWDRIER Rated 4/5 TPH @19%.Also known as the DustractGrain drier, canbe fedeitherside at the top. Fitted 20 HP drivemotor and Oil Burner Stillinside buteasytoget out Good Condition Offers %$Shaun 07850$978188

DRILLS

RS1420 2006 KUHN DRILL COMBINATION

3mtr Powerharrow c/wDrill Combination. Dry Stored. Tines 80% Good. Readytogoto work. MorePhotosonrequest. LocatedNrStratford upon Avon Very Good Condition £14500 %$Robin$07831 886601

4MtPowerHarrowCombination Drill c/w TungstenPowerharrow Tines, track Eradicators&LC402 Combi Liner Drill, Only Done 600Hectares, it comeswith Fraser 4.5mt 8ton LowLoader Transport trailer and Many Spare Parts. LocatedNear Atherstone, Warks, Morepictures on request Excellent Condition £28000

%$Robin$07831 886601

RS1528 BET TINSON 4MTDD DRILL

S10673 2010 KUHN VENTA LC 402

S10507 CARIER BELTCONVEYERS

FEED &FORAGE BOXES

4M Combination Drill with hydraulically depth controlled Steel Suffolk coultersin3rows Access Step,Following harrow, preemergenceMarkersand Road lights.Mounted on 2010 Kuhn HR 404D Powerharrowwith hydraulic markersfitted andlarge diameterpacker.1000 PTO60% Blades. Very Good Condition

£8750 %$Shaun 07850$978188

S10679 2019 KVERNELAND

10ins beltsappx40M Long, installed in roof to feed bins. AverageCondition %$Shaun 07850$978188

S10510 CARIER OVERHEAD

Galvanised Chain &Flight Conveyersappx26m long.2of Each with 6double sided outlets fittedchain to open and change across. Very Good Condition %$Shaun 07850$978188

S10511 CARIER OVERHEAD

Galvanised chain &flight Conveyer,estimated to be 40m long presently transferring corn acrossyardsupported by sturdy support frame 20m long about7mupinthe air allGalvanised and accessible Very Good Condition %$Shaun 07850$978188

RS1609 JF STOLL BELLAIR 2008

Self Loading StrawSpreader BlowerBedding Machine.In Good working order.For Sale due to change in Farming policy.MorePhotosonRequest. LocatedSaffron Walden, Essex Good Condition £2500 o.n.o. %$Robin$07831 886601

FERTILISER SPREADERS

Direct DrillFittedwithTwin Alfa Accord Seed HoppersHarrow Bar &loading table End Tow, Dry Stored. LocatedNrOakham AverageCondition £2350

%$Robin$07831 886601

RS1582 CARRIER 4MT 3Point

LinkageMounted. Grain only Drill FittedwithAmerzone Hopper Extension, 7row spacing Triple Ktype coulters. Reckie Following Harrow.Pneumatic Lowpressure Tyres. Transport Trailer with Hydraulic Lift/ Dry Stored/ More picturesonrequest/Located Nr Tonbridge, Kent. Good Condition £1750 o.n.o. %$Robin$07831 886601

RS1651 KUHN SULKY4MT COMBI

TS EVO6M MountedHydraulic folding tine drill. Fittedfront Levelling boards, Sprung tine coultersin4rows, preemergence markers, Half width Shutoff and following harrows. Very Good Condition £21500 %$Shaun 07850$978188

ELEVATORS &CONVEYORS

RS1506 CARIER GRAIN ELEVATOR

34fthigh X9”Belt 3Phase electric, Dismantled ready to Transport. Location,Maidstone Photosnot yetavailable, transport canbearranged Very Good Condition £650 %$Robin 07831$886601

RS1507 PERRYANGLEVEYOR

34ftHigh X9” Belt 3phase electric,Dismantled readyfor transport. Location Nr Maidstone PhotosNot Yetavailable Good Condition £400 o.n.o. %$Robin 07831$886601

RS1508 CARIER GRAIN

CONVEYOR 24ftlong x8”wide Dismantled Readyfor transport. Photosnot yetavailable.Located Nr.Maidstone Good Condition £400 %$Robin 07831$886601

RS1560 RUSSEL 45 SLEW

S10512 CARIER CHAIN &FLIGHT 8Inch Galvanised chain &Flight conveyerin2.4m Sections total10m installed butquite accessible.Also 2OfTop fill Galvanised 8inch chain &flight with poly tip conveyers appx25ft long Good Condition %$Shaun 07850$978188

S10514 CARIER BELTCONVEYERS

In Steel troughs, belts290mm wide,with 3phase drives.2Appx 150 ft long AverageCondition %$Shaun 07850$978188

S10570 SWIF TLIF TINTERSTORE SL - I 115T

RS1236 KR M 2.5 TonHopper,4 x600 kg Bags,Twin Disc Spreader Stainless Steel discs, Setto24mts butwill do 36mtr.Constant weighing electronic Control Box, Fold overHopper cover, Full road Lighting.Morephotoson request.Located Nr Wisbech Very Good Condition £3500 %$Robin 07831$886601

35ftRubber belt Elevator, with 2ftHiSpeed throwerattachment, Hydraulic up and down. Standard manual swivel wheels plus oblong hopper with castorwheels under Very Good Condition £3500 %$Shaun 07850$978188

RS1570 2000 AMERZONE N2000 Twin Disc Fertiliser Spreader 24mt Spread Hearland discs Weather CanopyHydraulic On/ OffMud flaps, Dry Stored, not been used for3years Photoson Request LocatedNrWallingford Oxon Good Condition %$Robin 07831$886601

S10538 VICON 802 Mounted Varispreader c\w hydraulicshut off, Ihopper extension. Stored inside Good Condition £175 %$Shaun 07850$978188

S10566 1998 KUHN MDS1141 MountedTwin Spinning disc spreader.FittedB910 &B610 hopper extensions to carry 4 half tonbags. Plus Headland kit, Hopper grids and cover. Tidy for age, 24M discs Good Condition £600 %$Shaun 07850$978188

PowerharrowseedDrill

Combination HD Gear BoxPacker Roller Accord Drillhitch Sulky 4Mt 32 coulter Drill on 4to 100mm spacing Suffolk type coulters Reekie type Seed Harrow plus calibration Trays. Located Near Warwick. Morephotos on request” AverageCondition £4250 o.n.o. %$Robin$07831 886601

S10603 HESTAIR STANHAY 12

ROW Rigid Precision drill set up forsugar or fodder beet.. FittedEnd towkit,softrubber wheels, Suffolk couter,narrow presswheels and split conical rear wheels. Sound usable drill

Good Condition £950 %$Shaun 07850$978188

33ftLong including extension Rubber Belted Potato/Grain Elevatorwith Both Grain and PotatoHoppers. Recent Refurbished Electric motor. Dry Stored. Done little Work. Located East Sussex Good Condition £1750 %$Robin$07831 886601

S10504 CARIER 40FT Belt & Bucket Grain ElevatorAppx20 TPH. Each leg 10 x7ins externally Footprint 25 x13. Built in 8ft sections. 3phase motor. Buyer removes Good Condition %$Shaun 07850$978188

S10506 CARIER 40FT Double Leg belt &BucketElevators Each with 17 ins by 8Ins legs and 17 ins by 31 ins Footprint. 3phase motor. Inside Choiceof2 Good Condition %$Shaun 07850$978188

S10571 FYSON33F T AUTOSWINGER Rubber 20 inch belted elevator, with 9ftslewing head.. Full hydraulicsinc belt drive, up &Down. Standard swivel legs. Choiceof2 Good Condition £3000 each %$Shaun 07850$978188

S10572 FYSON34F TELEVATOR

C\w End chute,3 phase motor, largehopper.Basic elevator butsound with 20 inch belt and hydraulic up &down Good Condition £2000 %$Shaun 07850$978188

S10573 WYTRAC26F T Rubber 20inch belted elevatorfitted Single phase motorand 7ft6ins extension. Fixed wheels on single axle.And castorwheels under base.Small hopper.Working order butold. AverageCondition £750 %$Shaun 07850$978188

FANS

RS1557 NECO 30 HP FAN 3 Phase 50 HZ Centrifugal Dryer Fan(Unused). PhotosonRequest, Transport Available New Condition £4000 o.n.o. %$Robin 07831$886601

S10631 HORSTINE FARMERY CASCADE 20M Mounted pneumatic Fertiliser spreader c\w part alloyhydraulic folding booms with poly tubes. Polythene tank holds appx3bags. PTO driven fan. Only used forone season Good Condition £3500 %$Shaun 07850$978188

FORKLIFTS &HANDLERS

RS1587 2011 JC B541 LOADALL SUPER

Telescopic Handler,125 hp Engine 8100 Hrs, Hydraulic Lock Pins on Head Stock. Tyres50% good, Bosch Suspension Seat, PU Hitch, 3rdline Hydraulic service, Boom lights,Morephoto on request, LocatedNrGrantham Very Good Condition £28000 o.n.o. %$Robin$07831 886601

RS1476 2019 KUHN HR 4004

RS1590 NC ENGINEERING SHEAR GRAB

GRASSLAND EQUIPMENT

WRI GHT SB ROK ER SE

5ft6”(or 1.70mt) width c/w

JCB BracketsComplete KVTines, located Nr Grantham, more photosonrequest Good Condition

£1250 o.n.o. %$Robin$07831 886601

S10578 2022 JCB 542 /70AGRI EXTRA

Hi Spec telehandler with Torque lock transmission, Air conditioned cab, Pick up hitch, trailer brakes, Spool connections front &back. Quick fit hydrauliclocking carriageand 360 degree LED lighting.3400 hours. 500/70 R24 Industrial pattern tyres Very Good Condition £77500 %$Shaun 07850$978188

S10657 THOMPSON 7F T Grain or re-handling Bucket Fittedstraight wear plateand JCB wide carriage bracketsSturdybucket Painted Black Very Good Condition £900 %$Shaun 07850$978188

GRAIN EQUIPMENT

RS1530 COLLINSON 12 TON

Grain/ Feed Hopper Side Discharge, Purchaser to Dismantle,Fork lift available to help loading.MorePhotoson Request.Located Nr Nuneaton AverageCondition £750

%$Robin$07831 886601

RS1567 GRAIN PUSHER Locally Made FittedwithMatbro Back Plate. Photosonrequest Good Condition £450 %$Robin 07831$886601

S10626 CONCRETE WALLING SECTIONS

LShaped one meterwideHeavy concretewalling 2.5m tall with 0.7m feet.7piecesplus one corner section. Also 17 Concrete “ Lego “Blocks1.6m long by 0.8m by 0.8m plus 2of0.8m square. ( Near Grantham) Good Condition

%$Shaun 07850$978188

RS1367 2018 MA JOR MJ30 350 Cyclone Finishing Mower

TractorMounted PTOdriven, Hydraulic Folding Large DiameterRoller,Mutirotary disc cutters, Galvanised Hood. Full Road Lighting,Hardlyused, as New. Morephotosonrequest, Transport canbearranged Excellent Condition £6250 o.n.o.

%$Robin$07831 886601

RS1398 GEOBROWNS 2.3 FLAIL MOWER

C/WHydraulic SideshiftMulti PointCAT 2Linkage.Whaletail

Cast Steel Flails, HDRear Roller, Opening Rear AccessDoor.More photosonRequest,Overrun

Gearbox Excellent Condition

£4850 o.n.o. %$Robin$07831 886601

RS1621 CLA AS JAGUAR 680

S10594 2004 MUTHING MOL /S200 Mountedhydraulically offset-able 2m wide flail mower with heavydutyflails and roller Good Rams, long PTOshaft. Useful and general purpose verge mower Good Condition %$Shaun 07850$978188

S10645 CHAIN HARROWSET Traditional Sound 60mm Pole 4.7m wide c\w 5Chain harrow sections stored inside on pallet ready to collect Good Condition £250 %$Shaun 07850$978188

S10649 HAYTER HARRIER 56 AUTODRIVE Vari -Speed Code 575A Pedestrian MowerC\w 70 litreGrass bag.22Inchcut Briggs &Stratton850E series Engine Recoil start.Bought in Error as newRRP £1549 Excellent Condition %$Shaun 07850$978188

S10650 2007 STIHL KM 90 COMBI Systemengine C\w detachable strimmer head. Very Good Condition %$Shaun 07850$978188

HEDGECUTTERS

LIVESTOCK EQUIPMENT

RS1626 CALF VERANDER !5ft

X15ftAll steel Galvanised Frame Transport Wheels. Coated Weather ProofRoofing with 4ft over hang.Located Nr Leicester. More Picturesonrequest Very Good Condition £2000 o.n.o. %$Robin 07831$886601

RS1658 IFOR WILLIAMS STOCK TRAILER

3.5 TonTwin axle,5 Stud Wheels

AllAluminium Floor and Body, Loading Gateand Ramps,full road Lights and Brakes.Very good clean Trailer. More Photos on Request, LocatedNrBury St Edmunds Very Good Condition £2650 %$Robin$07831 886601

RS1661 WALTER WATSON CATTLE FEEDER

S10641 HEAVY DUTYBULL GATES Galvanised 2.5 inch tubulargates in straightand solid order.The following sizes.5ft High by 5and 7ftwide.68inch tall by 68Inch wide and 57 Inch wide.Plus one fixed piecewith post 88 Ins wide.All Straightand strong Very Good Condition £60 each %$Shaun 07850$978188

S10643 CUSTOM MADE BULL TRAINER Built to use to slow youngbulls for showing etc 8ftby4ft in 2inch boxsection mostly plated with 3point linkageonone side.Designed by experienced Bull breeder Very Good Condition £300 %$Shaun 07850$978188

S10644 HEAVY DUTYBULL GATES 4of5ft by 44 inch tall Galvanised gatesbuilt outof strong 2.5 Inch tube.Straight& Sound Very Good Condition £70 each %$Shaun 07850$978188

S10665 GALVANISED CATTLE Crush, forinstallation in run or buildings, Side levers operate gates.. Plus well made galvanised HD Gate10ft6“By5ft6”

Good Condition £175 %$Shaun 07850$978188

Self Propelled Forage Harvester, Fully Floating 2.5mt Pick Up reel Header,25m Precision Chop CuttingDrum 180-Hp V 6MercedesDieselengine,New Clutch Last year,various New beltsin2023. Ready to go to work Good Condition £7750 o.n.o. %$Robin$07831 886601

RS1622 2004 JOHN DEERE 1145 OUT FRONT MOWER

Rotary Deck 5ft cut, well maintained in good working order,Startsonthe button Only 1500hrsNew GearBoxoncutting deck, recent service, located Nr Winslow, Bucks. Morephotoson request Very Good Condition £6500 o.n.o. %$Robin$07831 886601

RS1641 CLA AS 2DRUMMOWER 8ftCut Trailed Mower, In working order.Sorry no Pictures Average Condition £1250 o.n.o. %$Robin 07831$886601

RS1659 RITCHIE HD CHAIN HARROWS

Hydraulic Folding,Reversible Mats, All Galvanised frame LocatedNrHuntingdon New Condition £2225 %$Robin$07831 886601

RS1634 BOMFORD 90 6.59 TELESCOPIC

Three point LinkageMounted, 4ftHead, Jflails Rear roller, Electric Controls Debris Blower, More photosonRequest.Located Nr Newmarket Good Condition £3750 %$Robin$07831 886601

S10537 POWERUP A80COMBI RH 3Point LinkageMounted Fully IndependentPTO driven hedger 2.7M Reach with 800mm YFlail Head inc roller.Comeswith 1.3m Knife section cutter bar as well (Unused). Has 4leverincab controls. As newhardly used & Stored inside Excellent Condition £3500 %$Shaun 07850$978188

IRRIGATION EQUIPMENT

RS1585 FORD WRIGHT RAIN

12ftx6ft Tombstone 2bale feeder.PalletTine slots for Transport. Drop down sides forcleaning.Located Nr Huntingdon NewCondition £1650 %$Robin$07831 886601

RS1662 RITCHIE HD CATTLE FENCE 5’6 x10’ all galvanised at £165 each plus VATother sizes on request.Located Nr Huntingdon NewCondition £165 %$Robin 07831$886601

S10517 2013 FULLWOOD MERLIN

LOADERS AGRIC/ INDUSTRIAL

S10615 MATBROTELERAM

TURBO Articulated Telehandler c\w Solo Joystick controls, Clarke speed transmission. hydraulic locking Pin &Cone attachment system. 50 %15.5 -80-24 tyres.Sound machine,but has alittle rustaround the edges Good Condition £7500 %$Shaun 07850$978188

MISCELLANEOUS

£7500 .PhotosonRequest” £550

RS1569 AIR COMPRESSOR

Current test cert Airline air tank Approx 20 5CM diameter 53” 135 Length. Good Working Order.PhotosonRequest” Good Condition £550 %$Robin 07831$886601

RS1625 AG175 DISPENSER

2ofIrrigation Pumpsc/w Primers FittedtoFord6 cylinder 100 hp Engines. PriceExFarm. Located Nr.Tonbridge, Kent.Photoson request Good Condition £2400 each %$Robin$07831 886601

S10678 WRIGHT RAIN WR 83 /350 Turntable reel irrigator, Single axle 10/80 R12 Tyres. Decent pipe KometBTTwin gun on 2wheeled carriage Average Condition £600 o.n.o. %$Shaun 07850$978188

Milking Robot, Single Phase plus compressed Air.Fully Stainless steel unit milksone at atime automatically buthas an alarm to ring youinthe event of an issue. Also IncludesPlateCooler,Remote switch, Single phase Vacuum pump to milk and HPC Kaeser Sx3Sigma Air centre combines Compressor and Air drier, also single phase butneeding attention. Good Condition £17500

%$Shaun 07850$978188

S10542 DOUBLE HORSESHOE PONY TRAP Unused Steel trap suitable forshetland pony finished in redwith black leatherette double seat. Fittedfootbrakes and shafts NewCondition £525 %$Shaun 07850$978188

S10618 TUBAR CATTLE CRUSH Free standing standardpainted crush with timber floor,straight and sound with 3point linkage attachment pointstotransport. Good Condition £425 %$Shaun 07850$978188

Side delivery Sand or Feed Dispenser,for Cubicles Hydraulic DriveJCB Quick attach Brackets. LocatedNrLeicester. More photos on request Good Condition £1250 o.n.o %$Robin$07831 886601 RS1636 ARTIC DOLLY

Hydraulic

C/W extralong Draw Bar with Ring Hitch, Super Single Wheels TyresGood Air Suspension, Hydraulic Brakes.Located Nr Bury St Edmonds. Transport can be arranged Good Condition £1450 %$Robin$07831 886601

WRI GHT SB RO KE RS ER VI CE

RS1660 WALTER WATSON HD TRANSPORTBOX

S10628 2010 RUSMAIL QD 300/2

INCLINED FLIGHTED Conveyer

S10564 2010 CLA AS ZERION 3800 SADDLETRAC

RS1501 2013 DOWDESWELL 105MA

RS1652 GREGOIRE BESON 6 PLUS 1

6ftx4ft rear folding Rear Door,Sheep Gate, 3point Linkagemounted. LocatedNr Huntingdon NewCondition £1450

%$Robin$07831 886601

S10583 WIDE PAILING FENCE

In 30ftRolls on Pallets 6Rolls per pallet. 3ft6ins high 3.5 ins spacing @30per roll. 50 rolls of Oakand 80 of dipped( decking oil) pine (£10 per roll less New Condition £85 each %$Shaun 07850$978188

S10586 HEAVY DUTY HORIZONTAL LOGSPLIT TER

2m Long fittedcleated belt with 30mm cleatslifts to 1.5m high. Single phase seen very little use Adjustable legs. SWL75Kgs Max load 25Kgs Very Good Condition

%$Shaun 07850$978188

S10646 FREEZER RACKING 5ft by 5ft by 2ft wide approximately galvanised steel racking fitted4 largecastorwheels. Suitable for storage racking racking or placing foods in afreezer Very Good Condition £60 each %$Shaun 07850$978188

S10647 CYTRINGHAM BANTAM 180 Amp 3&Singlephase Stick welder C\w cables. Useful potable unit Good Condition £95 %$Shaun 07850$978188

S10656 BELLE MINI MIX Cement Mixer 90 Litremix capacity model C\w Stand &Electric 1 phase motor Good Condition £200 %$Shaun 07850$978188

S10659 APPROVED HYDRAULICS CONE SPLIT TER Model AH800 LS, Hydraulically driven heavyduty screw type splittermounted on Manitou backplate. Used onceas newRRP £3300 plus backplate cost Excellent Condition %$Shaun 07850$978188

ForwardControl Self propelled fittedwith SGT Slurry kit with tank andfront mounted Vogelslang pump and snorkel kit. Joystick operated canfill in 6minutes. Cat 4rearlinkagefor injectortoolbar etc.800/900 /65 R38Floatation tyres.2Speed Hydrostatic transmission and Climatecontrolled cab. Good Condition £87500 %$Shaun 07850$978188

PLOUGHS

RS1434 1999 DOWDESWELL DP120S

5furrowreversible (4+1) on Slated Boards, Manual Variable width, Little wear of the Fen, LargeClearance, Manure Skims &Rear Discs, Depth Wheel. More Photosonrequest.Located Nr Spalding Very Good Condition £5800 o.n.o. %$Robin$07831 886601

RS1565 2005 RABE 4+! FURROW

&furrowreversible semi

Mounted On Land Plough 14inch furrow Width, All good plough Metal, MorePicturesonrequest, locatedNrBury St Edmunds Good Condition £2650 Offers %$Robin$07831 886601

RS1654 DOWDESWELL DP8R

Free standing built on Substantial spline frame with side catchers to prevent roll off. Hydraulically driven. Will take Logs up to 3m long.Plus Rocking deck to assist feedingmachine. Good Condition £3000 %$Shaun 07850$978188

S10588 RYTEC3PHASEPTO Free standing PTODrivepoweredby3 phase motor. Designed to replace atractor on stationary PTOdriven machine c\w cable.Appx4years old Very Good Condition £4000 %$Shaun 07850$978188

S10589 ECC52.5KVA 3phase 40KwGenerator skid mounted, poweredbyVolvoPenta diesel engine c\w fuel tank radiator etc. Plus control box. Startsand runs well Good Condition£2000 %$Shaun 07850$978188

S10617 20 KVA Trailed Generator poweredby4 Cylinder BMC diesel engine.OnSingle axle chassis with 10/75 -15.3 Tyres, Under engine fuel tank, Rain cover, 240v 13 amp and 440V 16 amp socket Good Condition %$Shaun 07850$978188

S10624 RAILWAYSLEEPERS

2.5m (8ft 5ins) Long 8inch by 5” creosotedextrack reclaimed sleepersinmixed condition Good Condition £20 each %$Shaun 07850$978188

S10627 BIG BRUTE INDUSTRIAL

Vacuum Cleaner suitable for Grain storesetc.Fitted3 Motors all single phase.Mounted on Galvanised palletised trolleywith wheels and handlessocan be wheeled or movedwithforklift. Quantity of 3Inch suction hose Very Good Condition %$Shaun 07850$978188

MUCK &SLURRY EQUIPMENT

RS1542 2004 BUNNING HIGHLANDER 20TON

5Furrow Plough on 14 Slatted Boards Variable width any Bolt 12” 14” 16” Depth Wheel, Manure Skims. Plough MetalGood +New Sparewearing Parts.MorePhotos on request. Canbedelivered at pricetobeagreed Good Condition

£4250 %$Robin$07831 886601

RS1592 KVERNLAND LM85

Trailed Spreader,Air brakes, Sprung Draw Bar,Spinning Disc & Horizontal Beater,Variable Speed Floor,WeightCells, Rear TowBar In working order,ready to go to work (2 Machinesavailable, PriceisPer Machine) LocatedNr. Ashford, Kent Good Condition £9000 o.n.o. %$Robin$07831 886601

RS1608 CASE MUCK FORK

9Furrow ReversibleOnLand Plough Fitted with DD Bodies Skims, Depth Wheels. Plough Metalall good, No breaksor welds. Cat3Linkage. Many more picturesonrequest. Transport can be arranged at cost to be agreed Very Good Condition £5750o.n.o. %$Robin$07831 886601

RS1454 RABE 4FURROW SLATTED

5Furrow ReversiblePloughfitted with No.8Bodies. 300ml under beam clearanceDepth Wheel & manureSkims. Plough Metal75% good. In use this autumn. Located Nr.Grantham. MorePhotoson request Good Condition £2250 %$Robin$07831 886601

RS1632 LEMKEN 4FURROW

1.75mt wide 8tines industrial H Dtypefork with Weld on Font loader brackets Good Condition £500 %$Robin$07831 886601

RS1637 2021 BELMACROTARY SIDE SPREADER

14inch 3+ 1AutoReset C/W ManureSkims And depth Wheel. Plough metalall good. Location Bury St Edmonds. Morephotoson request Good Condition £3250 o.n.o. %$Robin$07831 886601

RS1456 DOWDESWEL DELTA 100 S 4furrow14reversible on SlattedBoards Hydraulic Vari Width Manureskims &depth Wheel. Sorry No Photos. Located Nr Bury St Edmonds” Very Good Condition £2750 o.n.o. %$Robin 07831$886601

Furrow Press90cm Rings. More photosonrequest.Located Nr Bury St Edmunds Good Condition £750 %$Robin$07831 886601 RS1642 DOWDESWELL 5 FURROW 14”

Almost new. Sale due to retirement. Full road Legallights and Brakes, PTODriven Rota. Hydraulic opening topDoor for easyLoading.NeverBeenonthe Road. Done Less than 50 loads from New. located Nr Brentwood, Essex. MorePhotosonrequest Excellent Condition £6250 %$Robin$07831 886601

RS1457 KV FURROW PRESS 4 FURROW

In Good working order,inuse this Autumn. Rings all sound. More Picturesonrequest.LocationBury St Edmonds Good Condition £550 o.n.o %$Robin$07831 886601

Manual Vari Width C/W SCN BodiesManureSkims &Trash Boards. Depth and Transport Wheel. All good Plough Metal, In use this Autumn, locatedNr Warwick. MorePhotosOnrequest Good Condition £2800 o.n.o.

%$Robin$07831 886601

4Furrow Spring Auto reseton SCN BodiesSNSkims, rear Discs &Depth wheel, Plough Metalall Good. LocatedNrNewmarket PhotosonRequest Very Good Condition %$Robin$07831 886601

RS1655 RABE RAVEN 5Furrow Hydraulic Vari Width 12 to 16” Furrows on Slated Bodies, ManureSkims,Depth &Transport Wheel. morePhotosonrequest LocatedNrNewmarket.New Photostofollow. Very Good Condition £4750 o.n.o. %$Robin 07831$886601

RS1656 DOWDESWELL DP100S

Hydraulic Vari WidthPlough 12 18 inch Furrows,onDDBodies, SN Skims, Depth Wheel, Good Plough Metal, ready to go to work, LocatedNr. Newmarket Morepicturesonrequest Good Condition £1750o.n.o %$Robin$07831 886601

RS1657 DOWDESWELL DD120S

5Furrow reversible 14inch (4+1) on DD Bodied, SN Skims, Rear Disc, Depth Wheel, in work today, Plough Metalall good. Located Nr Bury St Edmonds, MorePhoto on Request Very Good Condition £2250 o.n.o. %$Robin$07831 886601

S10515 RANSOMES TSR300

HD 6FurrowReversible plough, (3 +1 +1+1 )14 ins UCN bodies, 34ins point to point, 27 inch under beam with trash boards. HD model with Rack &pinion turnover. Bracketsfor Discs butonly fittedtothe rear Furrow.Sound plough Good Condition £700 o.n.o. %$Shaun 07850$978188

S10549 RANSOMES TSR110 4 Furrow reversible plough with greased UCN bodies, Sword Landslides, ManureSkims & Depth wheel. Good Frogs. Plus Double coil Flexicoil Furrow pressc\w manual pressarm fitted. Good Condition %$Shaun 07850$978188

S10596 LEMKIN VARIOPACK

110 Double ring presswith8 of 30 degree rings plus 2spares ( 68 inch appx).FittedTransport headstock and rubber cleaning straps Good Condition %$Shaun 07850$978188

S10606 VOGEL AND NOOT6

FURROW Hydraulic variwidth plough with slattedbodies. Was OK butBeamisbrokenafter 2nd furrow.Repairs or spares AverageCondition Offers %$Shaun 07850$978188

S10625 RANSOMES TSR300S 2

Furrow hydraulically reversible plough fittedUCN bodies ( some Ransomes), manure skims and sprung bar points. AverageCondition %$Shaun 07850$978188

S10660 2018 KVERNELAND EO 85 200

RS1517 STANDEN PEARSON 4X 36 POTATOPLANTER

Ridger Hood. Twin Planter Belts Stainless SteelOpenersTrack EradicatorsWideAluminium Loading Walkway, Chemical Applicator PerRow,Very clean. Ready to go to Work. Many more picture on request.Delivery canbearranged. LocatedNr Newmarket Very Good Condition £4250 o.n.o. %$Robin$07831 886601

WRI GHT SB ROK ER SE

S10602 TONG BAGCONVEYER 8ftby12Ins wide with 12 Ins plywood sidesSuitable formoving bagsorstitching Also 4FTby12ins wide roller conveyer formoving bags or boxes. Good Condition %$Shaun 07850$978188

S10622 NEWLONG NP 7 Hand held bag sewing machine,single phase (13amp) c\w string and tool kit. Shop soiled unused machine Excellent Condition £550 %$Shaun 07850$978188

POWER HARROWS

SPRAYERS

RS1472 2020 AMERZONE UF 1501

Tractorthree Point Mounted Sprayer C?W20Ftbooms Mixing tank &Handwash, Ambset controls, Current12months Cert. Reason forsale going Organic. Notusedlastyear. More pictures on request Excellent Condition £17500 %$Robin$07831 886601

S10672 2019 KVERNELAND VICON IX TRACK T3 Trailed 3200 litresprayer with 24m |Suspended parallelogram hydraulic folding booms fitted single stainless linesthe triple nozzles0.5m spacing.Single axle with 32 degree steering angle gives 3.6m turning circle.420/85 R38 Goodyear tyres.Plug &Play Isomatch IsoBus ready. Alteck P260 Pump and 150litrewashout tank. Control panel on sprayer and in cabwith joystick. Around 5000 acres spraying only.InTest currently Very Good Condition £17500 %$Shaun 07850$978188

SUBSOILERS

RS1453 TWB 7LEG

6Furrow on land or in furrow

Autoresetreversible plough with Variomat hydraulic 12 -20inch furrow width adjustment. No 28 Bodies85cm point to point and 85cm under beam. Largemanure skims, rear discs anddouble Trelleborg twin 421 320/60 12 depth/ transport wheels. Brand newunused plough at 2018 price! NewCondition %$Shaun 07850$978188

POTATO HARVESTERS & PLANTERS

RS1141 RUMPTSTAD ROTARY RIDGER

2, 3speed gear boxrows30 hook tined interow Cultivator c/w Ridging Hood, Depth Wheels, 3 Speed GearBox, Readytogoto work. Morepicturesonrequest. Very Good Condition £1250 o.n.o.

%$Robin$07831 886601

RS1436 GRIMME 2ROW

S10562 KEYAG GRUSE 2Row cup planter c\w hydraulic tipfilling hopper and ridging bodies. Kept inside,good working order for itsage Good Condition £750 %$Shaun 07850$978188

S10667 1999 PEARSON QUALITY MASTER 2Row Trailedpotato harvester, FittedFlotation tyres with discsinlieuofdiablo rollers, Full 25mm Webupand ontostar cleaners. 2Man flat belt picking offthe rear and cart elevator. Steering axle Only weighs 3500 kgs!Plus spare45mm web Very Good Condition %$Shaun 07850$978188

S10669 STRUCTURAL2 ROW

Mounted Belt Planter with largeplatform and ridging bodies Good Condition %$Shaun 07850$978188

POTATO /BULB GRADERS &EQUIPMENT

RS1387 RANSOM FAUN 2X 30

“ROWS C/Wexcellent Ridger Bodies, Nearly NewTyres, Beautiful Little Planter.Ready to go to work Very Good Condition £650 %$Robin 07831$886601

RS1437 SQUIRE 120 TWIN GRADER

RS1359 LELYPOWER HARROW 3MTR COMBINATION DRILL Combination C/W rear PiggyBack linkage&RECOSulky Suffolk CoulterSeedDrill. With Reekie Following Harrow,Veryclean Machine Directfromfarm, ready to go to work. Can Be delivered at cost to be agreed. MorePhotos on request Very Good Condition £2750 o.n.o. %$Robin$07831 886601

RS1580 2003 MASCHIO 3MTR

PowerHarrowc/w Packer Roller, in good working order,Tines 75% good, Dry Stored. Located Nr.TonbridgeKent, Morephotos on request. Transport canbe arranged Good Condition £4500 o.n.o %$Robin$07831 886601

S10581 KUHN 3M PACKER Roller,Standardtype c\w fittings including scraper bar etc to go on powerharrow. Seen little use Very Good Condition £700 %$Shaun 07850$978188

SILOS &STORAGE

S10334 2010 GSI 500 TON

RS1529 CHAVTRACK 24MT

SPRAYBOOMS Self Propelled Sprayer,Perkins Engine,4Wheel Drive, 4Wheel SteerRunning Gear is JCB Loadall, Flotation & Row Crop Wheels 2000lt Tank Full Road lighting,Wash tank, Chemical induction unit Variable ratcontrol. No Current Certificate. LocatedNearOakham Rutland Good Condition £8500 o.n.o.

%$Robin$07831 886601

RS1563 1993 FRASER AGRI BUGGY56

24 metreBooms, 5section Control, RDS,Rowe Crop wheels, ready to go to work. Located Nr Melton Mowbray Very Good Condition £9250 o.n.o.

%$Robin$07831 886601

RS1584 1996 GEM DIAMOND 1000LTRCTT Sprayer c/w 20 mt Booms Mixer tank, wash tank, Variable LevelBooms & BoutMarkers.LastCert 2022

Good Condition £1500 %$Robin 07831$886601

S10619 HARDI LY 1000

Potato HarvesterFully

Reconditioned c/w 50mm Webs but35mm and 60mm also part of the deal. Hydraulic Power steering. Lowleveldischarge elevator,alovelyclean machine, ready to go to work. Reason for sale changeoffarming Policy MorePicturesonrequest. Located Nr BromsgroveStaffs Very Good Condition £5600 o.n.o.

%$Robin$07831 886601

Potato grader Will Split Grade Bulk up to 20tons PerHr, 3 Phase electric. Many Sparewebs Various Sizes. Sale duetoChange of Farming Policy.Located Near Bromsgrove.Dry stored Good Condition £4600 %$Robin$07831 886601

S10555 FARM ELECTRONICS DX / 4354 Ambient temperature Store Chiller unit.. All In one topoutlet Easily installed presently in 75ft by 30ftstore. Requires outside air access through 54 inch square vent. Unit Base bloweris8ft by 55 Inches7ft tall.C\w Controls all 3phase Good Condition %$Shaun 07850$978188

S10600 1997 TONG 1TON BAGGER Fittedone 15 inch and one 4inch belt. Compressedair bag grips, 3phase electrics. Gold livery Good Condition %$Shaun 07850$978188

Galvanised steel Round Bins 33ft diameter, 2of, 6sheetshigh c\w doorsand very good access steps Galvanise still bright. Should dismantle easily.2Morealittle older Excellent Condition Offers %$Shaun 07850$978188

S10509 CRIT TALL NESTOF28 3m panelled Squarebins. Joined in 2 paired runs of 7aside.Total28 bins. 6Panels each 1m high per bin. One panel per bin has 20 by 22 ins access panel and 6ins hole foraeration tube (One per bin included )AFew Single phase 550 Wfans Good Condition %$Shaun 07850$978188

S10559 SHIPPING 40FT Steel Hi Cube Containers, painted dark green, delivery by arrangement locally in Lincs Good Condition £2750 %$Shaun 07850$978188

Mounted 1000 litresprayer with hydraulic folding &lifting 12m booms fittedwith triplexnozzle holderswith good selection of nozzles. Plus induction bowl, washouttank and self cleaning filter.Handy sound sprayer

Good Condition %$Shaun 07850$978188

S10653 HORSTINE FARMERY CHEMSAFE Palletised Portable regulationchemical store. Fitted with shelves and sump.Size1.5m wide by 0.8 mdeepby1.2m tall Good Condition £350 %$Shaun 07850$978188

Cat2&3 ILinkageAll Good MetalPressureroller BrakeBack Legs.Location Newmarket.More picturesonrequest,transport canbearranged Good Condition £3750 %$Robin$07831 886601 RS1475 MASTEMBROKE

Single Legtrailed Mole Drain Hydraulic LiftWheels And SSLeg In good working Order.Location Atherstone,Warks, morephotos on request Good Condition £1750 %$Robin$07831 886601

RS1556 FALMAC 5LEG 3.5MT HeavyDutySub Soiler C/W Heavy duty Packer Roller.Ready to go to Work. LocatedNrCrowland, Peterborough. Transport canbe arranged at cost to be agreed+ Good Condition £4000 o.n.o. %$Robin 07831$886601

RS1588 2014 CHALLENGER PHOENIX 3.00MT

5staggered Sub Soiler Legs. one rowofAngling Discs followedBySteel.Road lights side Rails PressureRoller.More photosonRequest.Located Nr Grantham Good Condition £7000 %$Robin$07831 886601

RS1643 BOMFORD SUPER FLOW 4mtrs11Low Profile Legs All Good wearing metal, ready to go To work, no depth wheels. A really strong Bit of Kit. Located Near Warwick, morePhotoson request Good Condition £1500 o.n.o %$Robin 07831$886601

RS1650 BOMFORD TWIN LEG Subsoiler c/w depth Wheels Old butuseable.Located Near Warwick. PhotosOnrequest AverageCondition £450 %$Robin 07831$886601

WRI GHT SB RO KE RS ER VI CE

S10544 MOLE PLOUGH Beam

type 3point linkagemounted to plough up to 1m deep C\w mole &expander on 16 inch by 1inch leg.Includessecondary skids for shallowerwork Good Condition £900 %$Shaun 07850$978188

TANKS

S10608 10,000 LITRES

StainlessSteel ex Milk tanker bowser,fitted Drawbar,Engine driven pump etctouse as spray bowser.Sound order as kept under cover when notinuse Good Condition £5750 %$Shaun 07850$978188

TRACTORS &EQUIPMENT

S10524 ALLIS CHALMERS

ROCROP Tractor, 2wdon80% 9 -24 Rearsand 4-15fronts. 3 Speed gearbox, PTO&Drawbar Good Bench seat. Designed with long bell housing for centrally mounted implements Good Condition %$Shaun 07850$978188

S10525 JOHN DEERE MODEL A 3Wheel Rocrop tractorFitted Electric start petrol engine.C\w with Drawbar,PTO and Stubs forlinkage.Long axleswith 11 -42rears and7-50-16 fronts Good Condition %$Shaun 07850$978188

S10556 JOHN DEERE 900 KGS Cast Iron Weight block to go on front linkage. Painted Black. Good Condition %$Shaun 07850$978188

S10629 2000 JOHN DEERE6210

4wdTractor FittedJohn Deere 640A DriveinPowerloader with Joystickcontrol. Powerquad gearboxwithLefthand reverser Recent Topend overhaul. 320/85 R28 Frontsand 14.9 R38 Rears 60%. Tidy useful Tractor Good Condition £16500 %$Shaun 07850$978188

S10630 1986 JOHN DEERE 2040 XE

2wdTractor around 6500 hours

fittedLow profile SG2 cab, 2 speed PTO. 60% 16.9 -34Rears and10-16 fronts. 2Spools and Pick up hitch. Very Good Condition £7500 %$Shaun 07850$978188

S10670 1988 FORD 6610 11 4WD

TractorwithAPCab,power steering,Grill Guard2 spools, 70% 13.6 24 Frontsand 60% 13.6 R38 Rears. Recent Clutch& Engine overhaul. Straight simple tractor. Good Condition %$Shaun

07850$978188

S10671 JOHN DEERE 6210 4wd Tractor, Showing 4654 hours, 16.9 R34Rears30% 420/85 R24 Frontswithfenders. 3 Spools. Pick up hitch. Raised dash consul CabwithPowerquad plus 6manual gearsand RH reverser Good Condition %$Shaun 07850$978188

S10674 1976 INTERNATIONAL 674 2wdTractor c\w deluxe trimmed cabwithPowersteering, Pick up hitch and spool valves 60%13.6 R38rearsand 7.50 -16fronts. Straight &Sound mechanically,runswell. Notused lately,paintwork abit flakey Good Condition £2750 %$Shaun 07850$978188

S10676 FIAT40KGS Cast iron front end weights. 12 available in fair order.Plus 3County Front End weights and 3Leyland ones

AverageCondition £250 o.n.o. %$Shaun 07850$978188

S10677 1994 CASE INTERNATIONAL 5130 MAX XUM SYNCHRO

4wdTractor Standard Synchro gearbox, 16.9 R38Michelins 40 %, 14.9 R24 Uniroyals 30%. 2Spools plus electric diverter 2Speed PTOTidycab,Farm ForceFront LinkageGWO for 8835 Hours. Cheap tractor Good Condition £8750 %$Shaun 07850$978188

TRAILERS

RS1478 BALE TRAILERMULTI FLAT8

Artic type Bale Trailer with stepped frame and Dolly on Super single Wheels, Located near Newmarket.Morephotos on request Very Good Condition £2750 %$Robin$07831 886601

RS1553 MERRICK 16TON

Converted Grain trailer Twin Wheeled, Tandem axle Good TyresAluminium Body,Manual Rear Door,Grain chute,Road Lights,Hydraulic Brakes, Fold overTarp.Dry Stored. Good Condition £5750 o.n.o. %$Robin 07831$886601

RS1554 GRAIN TRAILER 14TONS

Lorry converted Grain Trailer Tandem Axle,Aluminium body, Drop ownsides, Manual Rear Door,grain chute,Road lights, Fold overTarp,Hydraulic Brakes DryStored, located Nr Crowland Good Condition £4500 %$Robin 07831$886601

RS1620 LOWLOADER PLANT TRAILER

S10616 TEAMPORTTRIAXLE

Commercial 41 FT Flat trailer c\w hydraulic brakes on steel springs with 385/65 R22.5 Tyres. Timber floors, Side bars& Rubber mudguards Good Unbraked dolly if required. Choiceof2 AverageCondition %$Shaun 07850$978188

S10620 IFOR WILLIAMS 12 BY 6

RS1640 2021 TOYOTA LAND CRUISER AMAZON

RS1540 WARWICK 10 TON Grain Trailer Drop Detachable Sides Manual rear door,Grain chute. Road Lights &Brakes. Good all roundGeneral Ag Trailer Good Condition £4500 o.n.o. %$Robin 07831$886601

Artic Type NO BOGIE 26ft X8ftAll Steel Deck Beaver Tail, Wooden Deck on 8ft X8ft Swan Neck Hydraulic Rear Rampswith fold outSkids, Full Road Lighting and amber warning lights,Hydraulic Brakes, Twin Axle &Twin Wheels on 10 stud 8.2 XR16 Wheels. Viewing Recommended, More Photosonrequest.Located Near Wisbech Good Condition £3250 o.n.o. %$Robin$07831 886601

RS1648 WILCOX12TON GRAIN TRAILER

Flat tandem axle 3500 KGstrailer with Galvanised chassis, Good Floor tidy order Good Condition

£1750 %$Shaun 07850$978188

S10623 1988 BAILEY 11 TON

Monocoque trailer on walking beam axlesfitted with 385/65 R22.5 Tyreson8studhubs. Swinging back door with grain chute,Front ladder and small window. AverageCondition %$Shaun 07850$978188

S10635 2014 BAILEY TB 16

Lorry Conversion All Aluminium Body Manual rear door with Gain chute,twin Axle on Super singles, Hydraulic brakes.Road lights.Dry Stored. Morephotosonrequest LocatedNearWarwick Very Good Condition £3750 %$Robin$07831 886601

S10547 DOLLY ForMoving Artic trailersc\w 5th wheel coupling 9-/20 tyres on 8studbraked axle.Good Drawbar,suit yard work AverageCondition £450 h %$Shaun 07850$978188

S10574 TYE 4TON HI TIP Trailer, Single axle axle trailer with good 12.5/80 -15.3 Tyreson6stud axle. Steel Floor and 4ftPlywood sides. Repaintedawhile back but still tidy Good Condition £1200 %$Shaun 07850$978188

S10592 SINGLE AXLE General purpose lorry conversion trailer 15ftlong steelbody with 3ft sides. 18 -19.5 Tyres. Average Condition £1250 %$Shaun 07850$978188

S10614 2003 RICHARD WESTERN 12 TONROOT

Tandem Axle trailer on Super singlesfitted Sprung drawbar, hydraulic brakes andback door with grain chute.Front ladder Easy sheetand rack

Good Condition £7000 %$Shaun 07850$978188

Monocoque trailer on 560/60 22.5 Floatation tyres with steering back axle,Mudguards Strapbox and hydraulic back door with grain chute Read drawbar,Archedfront window& Ladder plus easysheet. Only used forgrain Very Good Condition £19000 %$Shaun 07850$978188

S10638 2013 IFOR WILLIAMS PLANT TRAILER 8by4Side wheels with Ramp back door ideal forlightplant and garden machinery Good Condition £1000 %$Shaun 07850$978188

S10642 WEEKS 3TON Tipping trailer Fitted9 ft by 88 Inch wide Steel Body with 18 Inch sides. Single axle with good 10/75 -15.3 tyres.Ideal Horse muck trailer Good Condition £500 %$Shaun 07850$978188

S10661 GULL 8TON HI LIF T Double dropside tandem axle trailer,sound timber sidesand floor.Very Straighttrailer Good Condition £3750 %$Shaun 07850$978188

VEHICLES/4x4

RS1524 DISCOVERYTYRES 25555 R20

4ofRoad Tyres50% Good, LocatedNrWinslow, Bucks. £7500 Each ONO Good Condition£75 each %$Robin$07831 886601

4.2ltr 6Cylinder Turbo + intercooler MOT, 2New Batteries recent Newturbo &Timing Belt, NewRear Brakes,7 seatsbut only 5Fitted. Uses No Oil. Full tow bar And electrics. Miles420K. Tyres50% good. Well used and maintained. Best towing Vehicle on the road, many Photoson request.Located Bourne,Lincs AverageCondition £5000 o.n.o. %$Robin$07831 886601

S10494 2002 ISUZU TROOPER CITATION SWBAutomatic 3.0 D Engine.Green Livery with grey velour heated front seatsCurrent MOT. FittedSteel wheels with 245/70 R16tyres 70%. AndTow bar AverageCondition %$Shaun 07850$978188

S10520 MITSUBISHI HARDTOP CANOPY To suit 2006 -2014 L200 Animal pick up body All Glassincluding rear lifting windowand sliding side & front window. Painted Black AverageCondition £250 %$Shaun 07850$978188

S10527 LANDROVER SWB Petrol Series2with Hard& Canvas tops ,Towbar and new7.50 -16 Tyres Good all round condition. Very Good Condition £17000 %$Shaun 07850$978188

S10611 HONDATRX 300 QUAD BIKE 4Wdwith Electric start Lightuse bycurrent owner Good Condition %$Shaun 07850$978188

S10633 2020 JOHN DEERE XUV 865MGAITOR

4wdOff Road buggy with tipping body,full cabwith doorsand bull barsall round.One owner from newonly done 17,219 milesin1158 hoursuse Very Good Condition £16500 %$Shaun 07850$978188

S10640 2021 FORD RANGER MS/RT Bi Turbo Automatic limited edition in GunmetalGrey. Top of the rangewith 20” OZ Racing Alloys PowerLoad cover. Ford Sync 3Audio.Selfparking,USB, 12V &240v Powerpoints. Appx 39000 MilesCat S. Ford Service History Very Good Condition £24500 %$Shaun 07850$978188

CASE IH MAXXUM 150 MULTICONTROLLER

2021, £55,950. 3,713 hours

TEL: 07971 001286, James Pryce Tractors

CASE IH OPTUM CVX300

2022, £107,500. 3,230 hours

TEL: 07971 001286, James Pryce Tractors

NEW HOLLAND T7.225AC

2022, £97,000. Ex Hire T7.225AC 50 Kph AutoCommand Transmission, 540/65R28 & 650/65R38 Michelins, Exhaust Brake, Front Linkage, 160 L/ min Hyd Pump, 4 Elec Rear Remotes, 1MMV, Low Pressure Return, Elec Joystick, EPL, 3 Speed PTO, PLM Ready, IntelliView IV Display, ISOBUS Socket, 8 LED Worklights, Radar, 2 Beacons, A/C, ITC, Baler Bar

TEL: 01245 380311, Ernest Doe

MASSEY FERGUSON 5711

2023, £POA. 4wd tractor c/w Massey FL3823 Loader euro 8/chiltern headstock

TEL: 01342 844721, Bruce Atfield

2024, £162,000. Ex Hire T7.270AC PLM 50 Kph AutoCommand Transmission, Blue Power, 600/70R30 & 650/85R38 Michelins, Exhaust Brake, EPL, Front Linkage w/ Front Couplers, FHM, 170 L/min Hyd Pump, 4 Elec Rear Remotes, 2MMV, Advanced Joystick, ISO Power Beyond Slice, IntelliSteer Level 3, 360 Worklight Pack, Dynamic Comfort Seat

TEL: 01245 380311, Ernest Doe

MASSEY FERGUSON 6S.165 DYNA 6

2024, £POA. Massey Ferguson

6S.165 Dyna 6 is a high-performance and technologically advanced tractor, featuring full suspension, a super luxe Grammer seat, 110 L/min CCLS hydraulic pump, adjustable steering column, and 2 electric spools. It's GPS ready, plus has Datatronic 5, front linkage, hydraulic front coupler, and 16 LED worklights. The tractor is equipped with in-cab PTO controls, PTO and transport boost, air conditioning, and wide-angle mirrors, making it a modern and efficient farming machine.

TEL: 07701 325526, Crawfords

KIOTI NX4510 HST

£11,495. 4WD Compact Tractor

TEL: 01933 272662, Blacktrac Compact Tractors

2021, £198,500. Equipped with Michelin VF 710/65 R38 tyres at 60% and Alliance 480/80R50 tyres at 50%. This machine features a 6000-litre tank and is fitted with a Novatel RTK Receiver for precise guidance. It also includes two 10.4” Vario Terminals, blue LED boom lights, and two rear cameras for superior control and visibility. The 3” High Flow system, stainless steel 5-way valve, and stainless steel centrifugal pump ensure high-performance spraying. Additionally, it comes with an air reeler hose and water reeler hose, making it a powerful and efficient solution for large-scale operations.

TEL: 07701 325526, Crawfords

NEW HOLLAND T7.210 RANGE COMMAND

£POA. Brand New, 50KPH Exhaust Brake 3 Speed PTO Front Axle Suspension 110LPM Pump Front Linkage Only Hi-Vis Headland Turn Sequence 1 5 Year Telematics

560/65R28 & 650/65R38 Tyres TEL: 01409 254040, Andrew Symons NEW HOLLAND CX8070

2013, £POA. Advertising on behalf of a customer. 6 Straw Walker machine. 710 Front Tyres, 500 Rear Tyres. Intelliview 4 Monitor. Yield Monitor. Moisture Meter. 25ft Varifeed 2 Header with Auto Float. Double Axle Trolley. Buddy Seat. Standard Light Package. Chopper Hood off but to go with Rear Camera & Separate Monitor. Used this season. Immaculate machine. 2500 Engine Hours. 1940 Threshing Hours TEL: 01409 254040, Andrew Symons

2024, £POA. Ex-Demonstration. This telehandler is now ready to be sold. Premium Specification. Powershift Transmission. Boom Light. CRC Boom Suspension. Hand Throttle. Semi-Auto Wheel Alignment. 460/70R24 Alliance Tyres. Approx. 100 hours

TEL: 01409 254040, Andrew Symons

FENDT IDEAL 9T

2021, £POA. 1,300 hours

TEL: 01749 812628, Redlynch Agricultural Engineering Ltd

JOHN DEERE 840

£5,950. 24M. 2x Spare Tyres TEL: 01622 873331, Morgan Machinery World Tractors

JCB 532-70 AGRI PRO

£38,500. With Pallet Forks. Pick Up Hitch. 1 Spool. Joy Stick Control. Air Con TEL: 01622 873331, Morgan Machinery World Tractors

NEW HOLLAND T7.270ACPLMI
FENDT RG665 SPRAYER
MANITOU MLT635 TELEHANDLER

VIEW LOTS OF BARGAINS FROM THE TRADE ONLINE NOW AT www.farmmachinerybuyer.com

NEW HOLLAND D1010

1995, £POA. Big Square Baler, 80x90 bales, 600/50R22.5 Alliance

TEL: 01761 490372, H Curtis & Sons

JOHN DEERE 7310R

2019, £112,500. Front Linkage. Front Spool. Cab & Front Suspension. Pick Up Hitch. 6 Spools. Gearbox Power Shift E23. Passenger Seat. Air Con. 2527 Hours Tyres 600/70 R30 – 710/70R42

TEL: 01622 873331, Morgan Machinery World Tractors

JOHN DEERE 6115MC

2018, £35,000. 4WD c/w JD 643 Loader Fr Fenders 2SV PUH Pass Seat Front Tyres: 480/65r24 70% Rear Tyres: 540/65r38 70%

TEL: 01362 692104, Chris Atkin & Son

CASE 4210

1996, £11,500. 4WD c/w MX455 Loader 2SV PUH Front Tyres: 280/85r24 80% Rear Tyres: 13.6x36 70%

TEL: 01362 692104, Chris Atkin & Son

KEENAN KLASSIK 140 DIET FEEDER WAGON

£9,950. Recent re-line plus new blades, fully serviced, tandem fixed axles, fold down unloading tray, magnets, STAD 04 weigher

TEL: 01308 862239, Buglers

£76,950. 165HP (200HP),Stage V, Power Command 50K,Mich 650/65R38 50%,4 mech Valves,2 MMVs & joystick, exh brakes,12 LED lights,A-cond,comf pack,class 4 axle, 2 beacons,HTS1, mech tele mirrors, hi-headlights,BT radio, LP return, telematics, hi-vis, Fr Linkage (to MMVs), wide fenders 1980

HRS

TEL: 01308 862239, Buglers

JOHN DEERE 6130R

2015, £39,995 +VAT. 5358 hours, 40K power quad gearbox, TLS suspension, a very tidy tractor

TEL: 07817716882, S Cheers Agri Engineering

RENAULT 815RZ

2001, £11,990 +VAT. 12600 hours, front linkage and PTO, cab suspension

TEL: 07817716882, S Cheers Agri Engineering

MASSEY FERGUSON 135

£5,000. TEL: 01763 780440, Oakfields

JOHN DEERE 6600

1996, £11,500. 4WD

TEL: 01763 780440, Oakfields

NEW HOLLAND T7.315HD

2022, £POA. Auto Command TEL: 01763 780440, Oakfields

JOHN DEERE 6155R

2018, £65,940. 6594 hours, 155hp

50K Trans. AutoQuad Tyres: 650/65R42 540/65R30

TEL: 0808 164 7700, Farol Ltd

MANITOU MT 625 H

2020, £38,994. 1271 hours, diesel TEL: 0808 164 7700, Farol Ltd

JOHN DEERE 9620RX

2020, £POA. 4740 hours. 620hp. 40K Trans. 18/6 Power Shrift Tyres: 30 Inch Track

TEL: 0808 164 7700, Farol Ltd NEW HOLLAND 85

2000, £17,500. 3,000 hours. Gross Weight 8,430kg. Engine output 63kW Attachments 4 in 1 Bucket, Forks TEL: 07971 952408, Diggers n Dumpers

ISEKI TPC183

£5,850. 349 hours, 18hp, 3 point linkage, pto TEL: 01409 253539, Dave Whitaker & Son Tractors

MCCONNEL PA 93 HEDGECUTTER

£5,750. 3 Pt Linkage, PTO Driven, 4m Reach From Centre of Tractor To Pivot Point, 1m30 Flail Head, Cable Control, Ex Smallholding, Owned from New, Had Little Use

TEL: 01233 732439, Kent Tractors

NEW HOLLAND T7.210 PC CL

FREE FARM ADS

WAYS TO SUBMIT YOUR FREE LISTING

TRACTORS

1967 MF 3303

1967, £1,500. Good solid old machine - Perkins 4203 on the button every time. Rams work OK but traction clutch u/s - hence spares or repair.

TEL: 07706 701647, Cheshire 771

CASE 1494

£6,850. A1 condition. Road registered. 4 almost new tyres, last owner had this tractor 30 years and it’s always been stored inside.

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford Kent 842

MOUSE-POINTER

1. ONLINE

If you are already a registered user, please reset your password.

ENVELOPE

1998, £7,000 ono. Lovely little tractor, missing left bonnet cover, other then that spot on tractor, 3,281 hours on the clock, this tractor is 2WD with 4WD option. Runs like brand new comes with slewtic grass mower

TEL: 07498 570057, Kent 876

£4,500 ono No VAT. Recently purchased from dealer, serviced and with new Winton 1.2m transport box. Grass tyres. Only selling due to change in circumstances.

TEL: 01323 844278 near Hailsham, East Sussex 788

2022, £75,000 +VAT. Selling due to no longer needed. Very well looked after 2,500 hrs serviced and maintained by Haynes. Still under warranty until 2025 50k Box 175hp Comes with 3cubic meter grain bucket and forks

TEL: 07880 358770, West Sussex 872

CASE-IH 1394

1987, £6,750. c/w DB power loader with bucket and pallet forks; just 5500 hours from new in very good working order.

TEL: 07971 547763, Yorkshire and the Humber. 124622

990

£3,500. With loader, a good working example.

TEL: 07821 184799, South West. 124759

2. EMAIL

Send your listing to fmfreead@kelseyclassifieds.co.uk Make sure to include your contact details

CASE-IH 1594

1988, £19,500. Commemorative Edition, 2WD, synchro gearbox with genuine 4300 hours from new; superb original condition; excellent cab interior, newish tyres.

TEL: 07971 547763, Yorkshire and the Humber. 124621

LA 1942

POA. Been in a shed for 30 years plus. Good for restoration. Tin work good with some surface rust. One front tyre flat. We started this on a belt for the first time in 30+ years recently.

TEL: 07423 502317, South East. 124664

FORD 4000

1974, £8,000. Recent new clutch. New brakes. New mudguards. Factory power steering. Pick up hitch. Bomford quick release loader. Tyres 95% good. Later cross block engine. No V5. TEL: 07831 856455, South East. 124695

KUBOTA L4200
JCB TM420S
DAVID BROWN
CASE

FORD 4000

1968, £4,200. Good working order. Battery seat tyres and dynamo with PTO pully.

TEL: 07814 899213, South West. 124506

FORD 8210 SERIES II

£16,000. Good condition, new tyres all round good engine, runs well, 8000 hours, lots of new parts.

TEL: 07935 021103, South West.

124724

FORD 3000

1969, £5,000. Restored a few years ago little used since. Very tidy tractor. TEL: 07764 318441, West Midlands. 124179

JOHN DEERE 2130

1975, £8,000. In good order, 4 W D, a well maintained example, fully restored 6 years ago, all good tyres.

TEL: 07860 536780, East Midlands. 124298

INTERNATIONAL HARVESTER 634

1970, £2,450. Engine runs but needs starter motor. Can load no problem.

TEL: 01395 568514, South West. 124405

INTERNATIONAL 434

£3,600. A genuine ex farm example.

TEL: 07821 184799, South West. 124760

LEYLAND 253

£3,500. 3 cylinder perkins engine 1200 hours straight tractor.

TEL: 07789 770956, South East. 124666

MASSEY FERGUSON 35X

POA. Full nut and bolt restoration, road registered, lovely tractor.

TEL: 07740 876235, South East. 124478

MASSEY FERGUSON 390

POA. A genuine example. TEL: 07821 184799, South West. 124757

MASSEY FERGUSON 35

POA. Pet/tvo, runs well, a good working example.

TEL: 07821 184799, South West. 124761

LEYLAND 270

£2,750. Starts instantly, a good project or for work.

TEL: 07821 184799, South West. 124755

NEW HOLLAND TN75S

£14,995. 4WD tractor, super steer, 3180 hours, shuttle lever, air con, spools, 75HP.

TEL: 07779 986072, South West. 124624

BMB TRACTOR

1955, £2,000. All original. Complete with own plough, harrow and transporter box.

TEL: 07885 884745, West Midlands. 124379

1953, £6,250. Restored 20 years ago. Perkins L4 Engine. Good condition. Plus a Massey Harris corn drill, 2 furrow trailer plough and finger bar mower POA. Please call 07584 055592, South West.. 124299

COMBINES

MASSEY FERGUSON 307

1982, £1,500. 10ft cut, spares or repair, broken shaft, comes with spare shaft.

TEL: 07790 479231, Wales. 124655

MASSEY-HARRIS 745

www.farmmachinerybuyer.com

FARM MACHINERY

Kelsey Media, The Granary, Downs Court, Yalding Hill, Yalding, Maidstone, Kent, ME18 6AL 01959 541444

EDITORIAL

Rebecca Farmer

Email: fm.ed@kelsey.co.uk

ADVERTISING & MARKETING

Jamie McGrorty 01303 233883 jamie.mcgrorty@kelsey.co.uk

GRAPHIC DESIGN

Jo Legg: Flair Creative Design jo.legg@flair-design.co.uk 07306 482166

MANAGEMENT

DIVISIONAL MANAGING

DIRECTOR: Steve Kendall

PUBLISHER: Jamie McGrorty

RETAIL DIRECTOR: Steve Brown

SUBSCRIPTION MARKETING

MANAGER: Claire Aspinall

PRINT PRODUCTION MANAGER: Kelly Orriss

DISTRIBUTION

Distribution in Great Britain: Seymour Distribution Limited 2 East Poultry Avenue, London EC1A 9PT Tel: 020 7429 4000 www.seymour.co.uk

Distribution in Northern Ireland and the Republic Of Ireland: Newspread Tel: +353 23 886 3850

Kelsey Media 2024 © all rights reserved. Kelsey Media is a trading name of Kelsey Publishing Ltd. Reproduction in whole or in part is forbidden except with permission in writing from the publishers. Note to contributors: articles submitted for consideration by the editor must be the original work of the author and not previously published. Where photographs are included, which are not the property of the contributor, permission to reproduce them must have been obtained from the owner of the copyright. The editor cannot guarantee a personal response to all letters and emails received. The views expressed in the magazine are not necessarily those of the Editor or the Publisher. Kelsey Publishing Ltd accepts no liability for products and services offered by third parties.

Kelsey Media takes your personal data very seriously. For more information on our privacy policy, please visit www.kelsey.co.uk/privacy-policy/

If at any point you have any queries regarding Kelsey’s data policy you can email our Data Protection Officer at dpo@kelsey.co.uk

FREE FARM ADS

WHEELS & TYRES

BFG ALL-TERRAIN

£Free. 31x10.5R15 Good Amount of tread left

TEL: 07961 445880, Slinfold, West Sussex 772

OTHER

HONDA MTX 125

1991, £1,200. Good starter runner and overall solid bike. It is over 30 years old so does have some wear and tear but good for age. Ideal bike for someone learning to ride.

TEL: 07709 076413

833

2 PLASTIC WATER TROUGHS

£100. One as a ball valve. The other one does not. Would sell separately Hampshire.

TEL: 07938 953127, Hampshire

850

30,000 LITRE STEEL BUNDED FUEL TANK WITH PUMP

£6,000. Neil Vessey 30000L fuel tank with pump. Electric fuel pump Heavy duty

Please ring for details

TEL: Varian Maude 07399 183506, near Canterbury, Kent 783

WANTED

Tractors, Diggers, Farm Clearances and Agricultural Machinery

35 Years experience. Professional service. Immediate valuation, payment & collection. Tel: Andrew Hooker 01233 732439

2.5M X 5CM CREOSOTE TREATED STAKES

£2.50. Excellent quality pressure treated secondhand 2.5m x 5cm pointed stakes available. Suitable for lots of uses for making fruit cages, for staking newly planted trees, to support bird netting, cut them in half for low fencing, excellent for replacing broken stakes in an orchard Lots of uses round the garden or farm. We have over 1,000 available. Buyer collects.

TEL: 07741 568644, Hawkhurst, Kent 774

ALLMAN SPRAYER

£100. Left boom shorter than right.

TEL: 07944 256630, Kent 828

APICO BIKE STAND

£30 No VAT. Good condition TEL: 07961445880, Slinfold, West Sussex 775

BLACKSMITHS TOOLS

AVERY SCALES

£25 No VAT. Set of Avery Scales including weights TEL: 01732 882534, Kent 794

AVERY SCALES

£400 No VAT. Large set of Avery platform scales comes with trolley on wheels TEL: 01732 882534, Kent 814

BLACKSMITHS FORGE

£350. Viewing welcome TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford Kent 841

£8 each. Viewing welcome TEL: Martin 07885 306055, (please phone - NO TEXTS) Ashford, Kent 848 BOILER

£20. Small electric boiler, ideal for making up milk powder

TEL: 01732 882534, Kent 803 BOTTLE JACK

www.kelsey.co.uk

WAYS TO SUBMIT YOUR FREE LISTING

FEATURED LISTING

KRONE SWADRO HAY RAKE 800/26

2012, £9,900 +VAT. Twin rotor rake. Steering axle. Very good condition and in full working order

TEL: Ian Burrows 07775 641238, Selby 776

£800. 10ft x 5ft, twin wheel with sliding door. Viewing welcome

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford, Kent. Private 839

CITROEN RELAY DROP SIDE TRUCK

£7,500 No VAT. 68 reg, MOT, VGC.

TEL: 01892 723895 / 07980 585307, Brenchley 868

CARRYING CRATE

£15 No VAT. Wire carrying crate with 8 separate sections

TEL: 01732 882534, Kent 801

CASE TRACTOR WEIGHTS

£300 No VAT. Like new, very minimal use. 10X45kg Used on a 956 but should fit other case tractors

TEL: 07944 256630, Kent 830

CHAIN HARROW

£120 No VAT. Set of 3 chain harrows 10' x 10' TEL: 07821 009693, Kent 874

1. ONLINE

Register an account at www.farmmachinerybuyer.com

CATTLE CRUSH

£400 No VAT. Small crush, used for dexters, 8ft long 5ft high , good condition

TEL: 07944 256630, Kent 827

CHESTNUT FENCING STAKES

POA. Mixed halves and quarters. 10/12cm tops. National delivery available. TEL: 079852 98221 www.cwpfencing.co.uk. 632

CHILD'S BIKE

£25 No VAT. Children's small bike with stabilisers TEL: 01732 882534, Kent

2. EMAIL

Send your listing to fmfreead@kelseyclassifieds.co.uk

Make sure to include your contact details

CONVENTIONAL BALE MEADOW HAY

£5. Bale Barron packs (21) per pack Good smell and colour. 18-20kg bales. 100 packs available. Ideally want to sell them in bulk

TEL: 07961445880, Kingsfold, West Sussex 834

DIESEL GENERATOR

£160 No VAT. Petter Abi diesel engine, handle start, we think it is 3kva but not sure, collection TEL: 07938 953127, Hampshire 849

DAF 45/150 HORSE BOX

2003, £5,250. Partitioned for 4. 53 reg. Very easy to drive compact 4 horse lorry. Under 7.5 ton. All good tyres, starts first turn every time. Good condition. No longer required.

TEL: 07850 739699, Berkshire 883

FEED BARRIER

£140. Measures approx 14' 10" 10 spaces.

TEL: 07938 953127, Hampshire 852

ROLLER

£150. 8' concrete filled roller approx 20" diameter.

TEL: 07821009693, Kent 875

FEATURED LISTING

11M KRONE TRAILED TEDDER 2015, £7,200 +VAT. Hydraulic spreading; headland kit. Used condition

TEL: Ian Burrows 07775 641238, Selby 779

Ever heavier, faster and more effective machinery sets new demands for tyres. From rugged and economical all-round tyres to special solutions for winter and other demanding conditions, Nokian Tyres offers a right set of features for today’s farming and machine contracting.

FLAT

FREE FARM ADS ONLINE

FORD RANGER XLT

UPGRADE YOUR LISTING

BRONZE

Your listing will appear in the magazine and online a week after publishing in print.

2016, £6,750 +VAT. Ex farm. Needs someone who knows what to do, it has DPF, turbo, black smoke issues. 115000miles, MOT May25, some dents and scrapes to bodywork, have spent '00's trying to sort issues,given up. North Kent, sensible enquiries only TEL: 07880 717642 873

FORKLIFT TIP SKIP

HYSTER ELECTRIC PALLET HAND TRUCK

2005, £120. Hyster P2.0L Electric Pallet Truck c/w charger In working order

TEL: 07703 595330, North Kent 824

HYSTER LPG FORKLIFT

2007, £3,750 +VAT. Hyster

H1.6 FT Lift Truck - 1500 hours. Excellent Condition 1.6 tonne, 4.45m lift height, 1,000mm forks

FEATURED LISTING

PARMITER MULTILEVEL ELEVATOR

Best offer close to £150. With 3hp Briggs & Stratton engine and operators manual. Stood outside so for spares or repair. TEL: 01621 788239, Essex 856

IAE GALVANISED SHEEP FEED TROUGH

HERITAGE PAVING SLABS

£400 ovno. 140+ Sandstone in colour paving slabs all on pallets ready to load. All used but fair order

TEL: 07850 360586 892

CONCRETE GRAIN WALLING

TEL: 07703 595330, North Kent 785

HARD WOOD BEAMS

SILVER GOLD

£180. Viewing welcome TEL: Martin 07885 306055 please phone (no texts), Ashford, Kent 847

3X GERRY CANS

For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly.

£45 No VAT. 1x with spout price for all three TEL: 01732 882534, Kent

For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*.

*Allow up to 3 days for processing.

£40

£40. 2x Hard Wood Beams suitable for fireplace 5ft long

TEL: 01732 882534, Kent 816

HOWARD ROTOVATOR

£500. 6’ Howard Rotovator in working order.

TEL: 07821 009693, Kent 832

£40. 2,743mm approx 9ft in usable condition, the original label still on the side, have more available TEL: 07593 572682, Hampshire

858

IFOR WILLIAMS FLAT BED TRAILER

£650 No VAT. Approx 12' long 6'6" wide alloy floor, good tyres, two new this year, all lights work, we've owned it for 20 years

TEL: 07938 953127

Hampshire 854

IFOR WILLIAMS TA510G-12 LIVESTOCK TRAILER

£3,500 No VAT. Ifor Williams twin-axle livestock trailer (used). 3.5 ton gross weight, 12x6ft with 6ft high ramped opening. Clean, bodywork in good condition, complete with tow hitch lock. The electrics need some work (not working at present) - the 7-pin plug has been cut off & the usual light covers have been knocked off by branches etc. The electrics box is also missing its cover plate.

TEL: 07973 718095, Surrey

678

£200 each No VAT. 13 freestanding grain walling panels. Height 2m base about 1.5m square. Would consider sell some or all.

TEL: 07850 360586

892

INTERNAL GLASS DOOR

£5. With glass partiitons. TEL: 07510 139126, East Sussex 591

INTERNATIONAL

ANIMALS FOR SALE

BEST QUALITY WEANERS

£60. Peitrain/Large White/ Duroc cross commercial hybrid weaners, bred from prize winning stock, for fast lean growth and a superb carcase. These healthy robust pigs will be wormed and ready to go by second week of November. They are particularly suitable for milk feeding as they can motor to bacon weight without getting too fat.

TEL: Anne 01323 440147 evenings or answerphone.

881

COLLIE PUPPIES

£500. Male collie pups, black and white, some with tan, from working parents on cattle and sheep, ready early November. Will be microchip and wormed.

TEL: 07762 696915 Canterbury, Kent 862

POINT OF LAY HYBRID PULLETS

£POA. Various breeds and colours including Black Rock, Light Sussex, discount for quantity

TEL: 01795 532848 / 07759

320496, Faversham, Kent

893

MUSCOVY DUCKS

POA. For sale or donation to charity

TEL: 01892 654720, Near Tunbridge Wells. 884

DUCKS

£25 each. Viewing welcome

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford, Kent 846

PEDIGREE POLLED HEREFORD BULLS

POA. Top quality, quiet, easy calving bulls with good structure, high carcase values and rapid growth rates. From low risk TB area. All bulls scanned, weight recorded and blood tested for IBR, BVD, Lepto and Johnes. BVD vaccinated. HCS Superior carcase sires, all bulls qualify for meat scheme premiums.

TEL: 01243 262252 / 07881 944394, West Sussex 885

POL HYBRID PULLETS

£15 each. Viewing welcome TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford, Kent 705

POL CHICKENS

£15 each. Viewing welcome TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford, Kent 840

PAIR OF CHINESE GEESE

£100. Viewing welcome

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford Kent 844

PAIR OF TALOUSE GEESE

£120/pair. Viewing welcome

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford Kent 845z

PEDIGREE SUSSEX IN CALF COWS WITH CALVES AT FOOT

4-5 years, £1,850 Offers considered. We have six pedigree Sussex cows with calves at foot available due to lack of winter housing. These are registered with the Soil Association and Pasture for Life. Cows 4-5 years with two steer and four heifer calves at foot currently. Lovely friendly cows .We are a disease free closed herd, yearly TB. Based in East Sussex.

TEL: 07941 885 377, Buxted 836

PUREBRED PULLETS

From £15 each. Rhode Island Red, Brahma, Brown leghorn, cream Legbar Viewing welcome

TEL: Martin 07885 306055 please phone - NO TEXTS, Ashford Kent. 843

JOCKEY WHEEL

£35 No VAT. Jockey Wheel with bracket.

TEL: 01732 882534, Kent 817

KRM BAND SPREADER

2018, £4,500 +VAT. TEL: 07977 279869, Kent

768

KRM L1 BAND SPREADER

2017, £4,000 +VAT. TEL: 07977 279869, Kent 767

KRM SOLA 2311 PLUS TINE DRILL

2015, £16,400 +VAT. 6 meter, following Harrow, pre em markers, spare set of points, original scales and manuals, RDS control box. Little use around 1300 ha, brought as back up drill.

TEL: 07900 995276, Hampshire 823

KIDD FLAIL MOWER

£400 No VAT. Good mower, 9ft cut, could do with some welding where body has rusted through and blue paint gone. Pto inc

TEL: 07944 256630, Kent 829

HOW TO SPOT A SCAM ADVERT

CAUTION

We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.

1. SPEAK TO THE FARMER

Always look into whether an advertiser appears legitimate.

2. VIEW THE ITEM If you can, view the item on the farm first.

3. AVOID ERRORS

Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.

5. NEVER PAY IN ADVANCE

Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.

6. PAYMENT

Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.

Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.

MUSCOVY

for your free account. For existing

2001, £3,000 ono. Kuhn mower good condition, needs tidy on end drum but works well, used to cut haylage this year as in video on website collection only

TEL: 07989 175121, Berkshire

LADIES LINED WELLIE BOOTS SIZE 7 £10 No VAT. Size 7

01732 882534, Kent

£100. Valet D07LB WGW

TEL: Tom 07961 555363

& SMALL DOG CRATES

£25. Large & Small dog

01732 882534,

£25 No VAT. TEL: 01732 882534, Kent

LIVESTOCK TRANSPORT BOX

UP SANTA & SLEIGH £80 No VAT. Large approx. 5' long TEL: 01732 882534, Kent

+VAT. Good working order. Sold with some spare

£900. Fosters livestock transport box, 6‘ x 3‘ steel sided with wooden plank floor only two years old, hardly been used hence reason for sale. Perfect for moving Sheep and lambs, has access gate. Mesh sides fold up and then box is ideal for carrying logs, manure and other farm equipment. It’s a perfect attachment for small holding as many uses. Will tow behind smaller tractor, has threepoint linkage.

TEL: 07753 324463, Hampshire 820

LOW BAY 400W SODIUM LIGHTS

£25 each. Low Bay Lights 400w High pressure sodium bulbs 4 available

£650 No VAT. Mighty Midget diesel welder 200amp Lister diesel engine handle start, works very well TEL: 07938 953127, Hampshire 851 MANUALS

£120. Operator, Parts and Workshop Manuals. TEL: Tom 07961 555363 887

MARSTON GRAIN TRAILER

1997, £4,500 +VAT. Tipping grain trailer, rollover sheet,stored in barn TEL: 07791635676, East Sussex 822 MISSED THE DEADLINE? INSTANT LISTING AVAILABLE

07709 796147, Surrey 835

TEL: 07703 595330, Kent 825 MIGHTY MIDGET WELDER

KUHN MOWER

WANTED

FRUIT TRACTOR

Wanted.

TEL: 07939 997563 810

GARDEN STORAGE BOX

Wanted. Suitable for outside use.

TEL: 07510 139126, East Sussex 719

4630 FORELOADER

1984, Wanted. Ford 4630 foreloader Please contact with what you've got please.

TEL: 07787116827, East Sussex 673

VOTEX TOPPER GEARBOX

Wanted. Or any other parts

TEL: 07939 997563, Maidstone. 821

MEADOW HAY

£3.50. Meadow hay, soft and dust free. Small conventional bales

£3.50, 4 String big bales £30. Can deliver, inspection welcome TEL: 07715 651766, Ashford, Kent 863

FEATURED LISTING

BENFORD 6 TON DUMBER

£3,450 No VAT. Forward tipping, straight skip dumper. Perkins engine. In full working order and runs well.

TEL: 07865 777256, East Sussex 721

METAL SCOOPS

£40 No VAT. 5 Metal Scoops price for all 5

TEL: 01732 882534, Kent 797

METAL SIGN/ADVERTISING

£125. Heavy Sign H - Approx 3ft 2", W - Approx 2ft 9" TEL: Tom 07961 555363 889

METAL SIGN/ADVERTISING

£125. Heavy Sign H - Approx 3ft 6", W - Approx 2ft 9" TEL: Tom 07961 555363 890

MOTOR BIKE STAND

£25. Motor Bike Stand. TEL: 01732882534, Kent 807

NATURAL IVY WOOD From £1 each depending on size. Raw untreated decorative Ivy Wood for upcycling. Sold as seen. TEL: 07510 139126, East Sussex 880

NECK COVERS AND HORSE RUGS

£5 each. Mark Todd Neck Covers full size Two available

£9. Mark Todd T/O Rug 5'

£14. 6' Mark Todd T/O Rug

£19. 6' Jumpers Horse Line T/O Rug

£14. 6' Weatherbeeta Fleece/ Combo 5' 9"

TEL: 07510 139126, East Sussex

718

OLD BUTCHER’S BLOCK

£250. Butcher’s block, solid wood 4ft by 2ft on stainless steel stand. Photos available. TEL: 07583 078354, Haywards Heath, West Sussex 879

OPICO FLATLIFT

£2,950 ono. Three leg Opico flat lift with opening discs and rear leveler. Good condition and used this spring

TEL: 07850 739699, Berkshire 765

ORANGE FLASHING BEACON

£40. Britax New Large Flashing Orange Beacon

TEL: 01732882534, Kent 799

PALLETS 1190 X 760

£1. Like new. Collection only 100s in stock

TEL: Elliot 07825 818570

PET CARRIER

£25 No VAT. Wicker Pet Carry Basket

TEL: 01732 882534, Kent 795

PIG ARK

£300 No VAT. 7ftx10ft great condition - never actually used for pigs only lambs

TEL: 07944 256630, Kent 826

POULTRY DRINKERS

£10. 3 Large Poultry Drinkers

TEL: 01732 882534, Kent 809

POULTRY FEEDERS

£10. 4 large metal poultry feeders

TEL: 01732882534, Kent 811

POULTRY CRATES

£25 each. Viewing welcome

TEL: Martin 07885 306055 (please phone - NO TEXTS), Ashford, Kent 838

RAILWAY SLEEPERS

£40 each. Used grade A sleepers hardwood

TEL: 01892 723895 / 07980 5853077, Brenchley

£30 No

£2.75 each, £2.50 per 100. 2.5m x 5cm treated & pointed used stakes for sale Quality stakes for sale, peeled, pointed and creosoted. Ideal for many uses round the farm and garden. for replacing broken stakes in orchards ideal for making fruit and vegetable cages cut in half for low fencing for bird netting great for rustic rose arbors and trellis ideal for staking newly planted trees Collection from Hawkhurst, Kent please as we aren't able to deliver. TEL: 07741 568644, Kent 778

FEATURED LISTING

WANTED PICKUP

TRUCKS 4X4S CARS & COMMERCIALS

Wanted. Any age any condition wanted, the good the bad and the ugly... whatever the condition we would like to buy it! Runners/ non runners/spares or repairs all considered Toyota, Mitsubishi, Ford, Land Rover, Isuzu, Mazda, Iveco, Mercedes etcCovering all of the South East. Top cash prices paid for all pickup trucks, four wheel drives, vans, flatbed trucks. Instant cash or BACS transfer on the spot with recovery collection

TEL: 07542 420700, Kent 837

FREE FARM ADS ONLINE

RM SPEEDY RAIN 25/50

£795 inc VAT. RM speedy rain 25/50 mini hose reel irrigator. Only used a couple of times comes with instruction manuals. Very expensive new

TEL: 07885 669493, Kent

857

ROLL OF WIRE

For paid listing, submit payment details to complete the process. For free listing click "SUBMIT LISTING" to complete the process.

6. MY LISTINGS

You will find your listings here once submitted: Scheduled – Your listing has been processed and is waiting to go in the magazine before going live Pending – Your listing is waiting to be processed Expired – Your listing has come to the end of it's month online. You can edit your listing once it has been processed. Once your listing has expired you can re-list.

£35 No VAT. Small meshed roll of wire

TEL: 01732 882534, Kent

815

STEEL ROAD PLATE

£375 each. 8 X 4 steel road plate, 10 available.

TEL: 01892 723895 / 07980 585307, BrenchleY

866

SALTER SCALES

£30. Salter scales, ideal for weighing birds or fish

TEL: 01732 882534, Kent

804

SMALL

LIVESTOCK TRAILER

£250 No VAT. Suit atv/quad. TEL: 07944 256630, Kent

784

SOFT STEEL GATES

£4. For possible upcycling.

TEL: 07510 139126, East Sussex 590

SPRAYRANGER LGP

£1,800. 1500l tank,12/18m booms. Land Rover 200 TDI engine & gearbox. 2 sets of wheels, 4wd 4ws. Induction hopper, clean water tank, lightweight machine.

TEL: 07889 032695.

Maidstone Kent 878

STIHL FR450 BACKPACK STRIMMER

£375 inc VAT. Working order, reasonable condition. Very expensive new and hard to find used

TEL: 07885 669493, Kent 865

STIHL FS131 BRUSHCUTTER

£450 inc VAT. Petrol brushcutter with reciprocating blade fitted. Only used a handful of times very good condition. Very expensive new.

TEL: 07885 669493, Kent 864

STUB AXLES

£100 No VAT. A pair of FAD stub axles 70mm square solid, 205mm PCD, 6 stud.

TEL: 07702 2022002, Hampshire 777

TELEHANDLER TIP BINS

£300 each No VAT. 1200 litres, 2000kg. 4 Available.

TEL: 01892 723895 / 07980 585307, Brenchley 871

TRADITIONAL WOODEN SHEEP HURDLES

£15 +VAT each. Traditional wooden hurdles 6' x 3' other sizes available , collection or can deliver

TEL: 07973 426665, Crowborough, East Sussex 855

USED TELEGRAPH POLES

£80 each.

TEL: 01892 723895 / 07980 585307, Brenchley 867

LIGHT GREEN CUPBOARD

£28. 'Whiteleaf Modern Furniture' Two Drawers Two Doors.

TEL: 07510 139126, East Sussex 743

WATER TANKS

£25. Various water tanks and tin bath

TEL: 01732 882534, Kent 798

WELLIES AND BOOTS

£30 No VAT. 2 pairs of wellies size 7 & 8, 1 pair size 8 leather boots all never been worn price for all TEL: 01732 882534, Kent 813

VINTAGE

FREE FARM ADS

HOW TO SPOT A SCAM ADVERT

CAUTION

We are currently aware of a number of fraudulent advertisers attempting to sell items within this section. While we aim to protect our readers by removing these adverts, sometimes they may unfortunately appear. Please be mindful before entering into any deals and PROCEED WITH CAUTION.

1. SPEAK TO THE FARMER

Always look into whether an advertiser appears legitimate.

2. VIEW THE ITEM If you can, view the item on the farm first.

3. AVOID ERRORS

Avoid anything with errors If an ad has odd formatting, strange or poor-quality images, or spelling/grammar mistakes.

5. NEVER PAY IN ADVANCE

Avoid sellers who claim to be unavailable (e.g. they are travelling or have moved overseas) and insist on payment prior to arranging delivery.

6. PAYMENT

Avoid any arrangement that asks for payment via money order, wire transfer, international funds transfer, preloaded card or electronic currency, like Bitcoin. It is rare to recover money sent this way.

Farm Machinery is NOT responsible for any part of the transaction that takes place with the seller and the buyer.

WESSEX DUNG BEETLE

£2,250. One owner, light usage, barn stored. No longer required. Great for picking up leaves and grass mowing as well as Dung!

TEL: 07879 004519 859

WHEELED TROLLY

£80 No VAT. 4 shelved large trolley on wheels

TEL: 01732 882534, Kent 812

WOODEN CRATE

£40. 6'X3' on wheels

TEL: 01732 882534, Kent 819

WOODEN PARTITIONS

£3 each. Part Chipboard and part Plywood on a wooden frame 4 available

TEL: 07510 139126, East Sussex 592

YARD GATES

£700. Site gates 6 metre opening with posts ready to hang

TEL: 01892 723895 / 07980 585307, Brenchley 870

SANDERSON GX525

TELEPORTER

1996, £8,750. Comes registered with V5. Everything works as it should.

TEL: 07721581432, North West. 124260

BAMFORDS CLIPPER CHAFF CUTTER

£125. Complete nut bolt restoration, 38 new hardwood elevators, new wooden shute, 2 new blades, heavy item needs to be winched onto trailer. Two iron wheels fitted. Trailer not included. Collect only.

TEL: 07733 591895, East of England. 124513

4”SCALE RANSOME BALER

£1,600. Completed and assembled from drawings. Painted orange. Full set of drawings also included. Viewing essential. Collection essential.

TEL: 01590 683000, South East. 124172

BAMFORD CLASON LANDLORD

£500. With 12ft header on a trailer.

TEL: 07789 770956, South East. 124162

RANSOME M.G CRAWLER

£750. Plus second one for spare parts.

TEL: 01379 741378, East of England. 124168

TAD LEN MOUNTED FIELD CROP SPRAYER

£750. With 6m field boom, in good condition and shape and in good running order. Be very handy for Farmer or any horses yard. Comes with manual and part catalogue.

TEL: 07854 440159, South East. 124283

KONGSKILDE 3M DRILL/ ITALIAN POWER HARROW COMBINATION

£2,000. Tines good, Suffolk coulters.

TEL: 07847 619757, East of England. 124183

JOHN DEERE RIDE ON MOWER ROBINE 900

£3,200. Excellent condition, everything works as it should. For sale due to loss of contract.

TEL: 07721581432, South East 124288

FLEMING FERTILISER SPINNER

£360. In good condition and shape and in good running order. Be very handy for Farmer or any horses yard. Please call 07854440159, South East. 124282

listing will appear in the

and online a week after publishing in print.

For £29 +VAT your listing will appear in a featured box in the magazine and featured online instantly. For £49 +VAT your listing will appear in a featured box in the magazine plus in Agricultural Trader and featured online instantly*. *Allow up to 3 days for processing.

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.