Pacific Bench Construction Documents

CALIFORNIA POLYTECHNIC STATE UNIVERSITY SAN LUIS OBISPO

PACIFIC BENCH

INSTRUCTOR OVERSEEING:

1 GRAND AVE. SAN LUIS OBISPO, CA 93407

Professor JONATHAN REICH

STUDENTS INVOLVED: Nathan Jackson Megan Nguyen Kevin Nugent

Legend

Pacific Bench Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

COVER SHEET

G0.1

PROJECT DESCRIPTION

SHEET INDEX

STUDENT INFORMATION

01 GENERAL G0.1 COVER SHEET G0.2 TITLE SHEET

NATHAN JACKSON NJJACKSO@CALPOLY.EDU

02 ARCHITECTURE A1.0 SITE PLAN A2.0 FINISHED PLAN A2.1 FRAMING PLAN A3.0 ELEVATIONS A4.0 SECTIONS A5.0 CONNECTION DETAILS A5.1 SCREW LAYOUT DETAILS

MEGAN NGUYEN

INSTRUCTOR OVERSEEING: MNGUY164@CALPOLY.EDU

Professor JONATHAN REICH

KEVIN NUGENT

03 SHOP DETAILS S1.0 BRACKET FABRICATION DETAILS S2.0 WAVE 1 DETAILS S2.1 WAVE 2 DETAILS 04 MATERIALS M0.1 HARDWARE INVENTORY

STUDENTS INVOLVED:

KDNUGENT@CALPOLY.EDU

Nathan Jackson Megan Nguyen

PROFESSOR INFORMATION

Kevin Nugent

JONATHAN W. REICH JREICH@CALPOLY.EDU (805) 756-1351

GENERAL NOTES

ABBREVIATIONS

1 - ALL WORK SHALL CONFORM TO:

(E) ACC ADJ ARCH BLCG BLDG CD CJ CL CLR CONC CTSK DIM DTL ELEV EQ IN LANDS NTS PERP PVMT REF REIF

(A) THE MINIMUM STNADARDS OF THE CALIFORNIA BUILDING CODE THAT MAY BE APPLICABLE TO THIS INSTALLATION. (C) ANY SPECIAL CONDITIONS REQUIRED BY ALL LOCAL GOVERNING AGENCIES OR CAL POLY. 2 - ALL WORK DESCRIBED IN THE DRAWINGS WILL BE DONE BY STUDENTS AND SUPERVISED BY PROFESSOR JONATHAN REICH. 3- DIMENSIONS SHOWN SHALL TAKE PRECEDENCE OVER DRAWING SCALE OF PROPORTION. LARGER SCALE DRAWINGS SHALL TAKE PRECEDENT OVER SMALL SCALE DRAWINGS. 4 - APPLICANTS ACCEPT RESPONSIBILITY FOR INSTALLING, MAINTAINING, AND REMOVING BENCH AS REQUIRED. 5 - PERFORMANCE BY THE CONSTRUCTION TEAM SHALL BE CONSISTENT WITH THE CONSTRUCTION DRAWINGS AND SPECIFICATIONS AS NECESSARY TO DELIVER THE INDICATED RESULTS OF THE DESIGN INTENT. 6 - DETAILS MARKED 'TYPICAL' SHALL APPLY IN ALL CASES UNLESS SPECIFICALLY NOTED OTHERWISE. 7 - CONSTRUCTION DOCUMENTS DESCRIBE THE PRODUCTS, SYSTEMS, QUANTITIES, CONFIGURATION, AND PERFORMANCE SPECIFICATIONS THAT DELIVER THE OVERALL DESIGN INTENT OF THE PROJECT.

SECT SHT SXB TYP WB

EXISTING ACCESS/ACCESSIBLE ADJACENT/ADJUSTABLE ARCHITECTURAL BLOCKING BUILDING COMPOSITE DECKING CONTROL JOINT CENTER LINE CLEAR CONCRETE COUNTER SUNK DIMENSION DETAIL ELEVATION EQUAL INCH LANDSCAPE NOT TO SCALE PERPENDICULAR PAVEMENT REFERENCE REINFORCE / REINFORCED / REINFORCEMENT SECTION SHEET SEX BOLT TYPICAL WELD BEAD

Legend

VICINITY MAP SITE OF PROPOSED BENCH

Pacific Bench Site Date Drawn by Checked by

DEXTER LAWN

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

TITLE SHEET

BLDG #14

N

G0.2

BLDG. 22

BLDG. 10

INSTRUCTOR OVERSEEING: BLDG. 35

Professor JONATHAN REICH

BLDG. 13

STUDENTS INVOLVED: Nathan Jackson Megan Nguyen BLDG. 180

BLDG. 34

BLDG. 38

Kevin Nugent

Legend

BLDG. 5

1 A2.0

1

1" = 128'-0"

BLDG #

BLDG NAME

2

COTCHETT EDUCATION

5

ARCHITECTURE AND ENVIRONMENTAL DESIGN

10

ALAN A. ERHART AGRICULTURE

13

ENGINEERING

14

FRANK E. PILLING COMPUTER SCIENCE

20

ENGINEERING EAST

20A

BERT & CANDACE FORBES CENTER FOR ENGINEERING EAST

21

ENGINEERING WEST

22

ENGLISH

34

WALTER F. DEXTER BLDG

35

ROBERT E. KENNEDY LIBRARY

38

MATHEMATICS & SCIENCE

52

SCIENCE

180

WARREN J. BAKER CENTER

SITE PLAN

Sim

BLDG. 20

BLDG. 21

BLDG. 52

BLDG. 20A

Pacific Bench

BLDG. 14

Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

SITE PLAN

A1.0

(E) PLANTER

(E) BENCH BRICK PAVED AREA

INSTRUCTOR OVERSEEING: Professor JONATHAN REICH

STUDENTS INVOLVED:

"

A4.0

A3.0

3 1

Si

A SE

9"

1 2"

DESK

Legend

8" 7/

1

Sim

SEAT

12

12 1/2"

A3.0

A4.0

2

Kevin Nugent

" 12

2 A4.0

3 1/2"

Megan Nguyen

1/2

(E) CONC WALL

Nathan Jackson

3

9' - 7 1 3 /32"

(E) CONC WALL

m

T

(E) TREE

DESK SEAT

9'

-2

6" /1 1 1

(E) TREE

17' - 10

Pacific Bench

13/32" PLANTING

Site Date Drawn by Checked by

(E) CONC PAVING

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

(E) CONC PAVING

PLAN BLDG 14

1

1/4" = 1'-0"

FINISHED PLAN

A2.0

10.02

INSTRUCTOR OVERSEEING: Professor JONATHAN REICH 10.03

STUDENTS INVOLVED: Nathan Jackson

10.01

10.06

Megan Nguyen 10.05

10.05

10.01

10.04

Kevin Nugent

3' -

0"

10.05

Legend

9 0"

(E) CONC WALL

3' -

10.01 10.02

8 7

3' - 0"

3' - 0"

1' - 11 1/2"

4' - 0"

KEYNOTES

10.03 10.04 10.05 10.06

TYP BRACKET TYP BRACKET - SHORT BACK POST TYP BRACKET - REVERSED DESK AT BRACKET TYP EXTENDED BRACKET TYP EXTENDED BRACKET SHORT AT DESK

Pacific Bench

4' - 0"

Site Date Drawn by Checked by

1

1

3/8" = 1'-0"

2

3

4

5

FRAMING PLAN OF GALVANIZED STEEL SUPPORT BRACKET "CLAMPS"

6

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

FRAMING PLAN

A2.1

HELLO WORLD

CALI BABMOO APRON TRIM

2 S2.1

ALIGNED TO TOP OF DESK

ELBOW OF (E) WALL

INSTRUCTOR OVERSEEING:

2' - 6"

1' - 4 3/4"

CALI BABMOO CLADDING

Professor JONATHAN REICH

STUDENTS INVOLVED: GALVANIZED STEEL BRACKETS TYP

ELBOW OF (E) WALL

Nathan Jackson 0' - 3"

4' - 0"

4' - 0"

1' - 11 1/2"

3' - 0"

3' - 0"

3' - 1 1/8"

Megan Nguyen Kevin Nugent

Legend

2

RIGHT SIDE ELEVATION

1/2" = 1'-0"

END OF (E) WALL

2' - 3 3/4"

CALI BAMBOO CLADDING

CALI BAMBOO APRON TRIM

Pacific Bench

1' - 7"

ALIGNED TO TOP OF SEATING

Site Date Drawn by Checked by ELBOW OF (E) WALL

7' - 8 1/2"

1

1/2" = 1'-0"

LEFT SIDE ELEVATION

3' - 0"

3' - 0"

2' - 0"

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

ELEVATIONS

A3.0

INSTRUCTOR OVERSEEING: Professor JONATHAN REICH

STUDENTS INVOLVED: Nathan Jackson 2 A5.0

WOOD "SLEEPER"

Megan Nguyen

3 A5.0

CALI BAMBOO DECKING TYP

Kevin Nugent

7 A5.0 Legend 9 A5.0

1 A5.0

10 A5.0

19"

BOLTED AND WELDED GALVANIZED STEEL SUPPORT BRACKETS

4" TYP

25 15/16"

30"

WOOD "SLEEPER"

28" MAX.

Pacific Bench Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

SECTIONS ALIGNED TO GROUND

3

1" = 1'-0"

DESK AT BRACKET

2

1" = 1'-0"

EXTENDED BRACKET

1

1" = 1'-0"

BRACKET

A4.0

NOTE: SEE DTL 8 FOR PLAN VIEW PLACEMENT OF BOLTS AND SCREWS

4 1/2 1 1/2

CALI BAMBOO COMPOSITE DECKING

1" CTSK SEX BOLT

NOTE: SEE DTL 4 ON A5.1 FOR DIMENSIONS

3/16" STEEL STRIP

"

2"

" 1"

2" NO. 10 CTSK SCREW 1-1/4" NO. 10 CTSK SCREW WITH WASHER AND NUT

2" x 2" NAILER

CALI BAMBOO COMPOSITE DECKING

CALI BAMBOO COMPOSITE DECKING

1-1/4" NO. 10 CTSK SCREW WITH WASHER AND NUT

MIG WELD CONNECTION (WB)

2-1/4" NO. 10 SCREW W/ WASHER AND NUT

Professor JONATHAN REICH

2"ANGLE CHANNEL BEAM

2" ANGLE CHANNEL BEAM

9

INSTRUCTOR OVERSEEING:

2" ANGLE CHANNEL BEAM

6

EXTENDED SEAT LIP

3" = 1'-0"

DECKING TO STEEL - BACK

3" = 1'-0"

3

STUDENTS INVOLVED:

BACK REST LIP

Nathan Jackson

3" = 1'-0"

Megan Nguyen NOTE: SEE DTL 1 FOR SECTION VIEW PLACEMENT OF SCREWS

NOTE: SEE DTL 1 ON A5.1 FOR DIMENSIONS

1" EQ

2"

1"

EQ EQ

2 11/16" EQ

1"

EDGE OF (E) WALL

2 1/2"

1" SEX BOLT 2-1/2" NO. 10 SCREW. SEE MATERIAL SPECS

3/16" STEEL STRIP

8

1-1/2" x 1-1/2" NAILER

5

SEAT LIP - PLAN

3-1/4" NO. 10 SCREW W/ WASHER AND NUT BACKING

DECKING TO STEEL - DESK

3" = 1'-0"

CALI BAMBOO COMPOSITE DECKING

1/2"

WELD CONNECTION

1"

2" ANGLE CHANNEL BEAM

1/2"

1/4" GALVANIZED STEEL BRACE

2" x 2" WELD PLATE

2

2" ANGLE CHANNEL STRIP

DESK LIP

3" = 1'-0"

NOTE: SEE DTL 8 FOR PLAN VIEW PLACEMENT OF SCREWS

2" ANGLE CHANNEL STRIP

3/16" STEEL STRIP

Legend

CALI BAMBOO COMPOSITE DECKING

2" NO. 10 SCREW

2" ANGLE CHANNEL BEAM

3" = 1'-0"

(E) CONC. WALL

CALI BAMBOO COMPOSITE DECKING

1-1/4" NO. 10 SCREW WITH NUT AND WASHER

CALI BAMBOO COMPOSITE DECKING

1" CTSK SEX BOLTS

3 1/2"

3" = 1'-0"

EXTENDED REAR SEAT LIP

7

Site Date Drawn by Checked by

2" NO. 10 CTSK SCREW 2" x 2" NAILER (E) CONC. WALL

CALI BAMBOO COMPOSITE DECKING

BENCH TO WELD PLATE

4

3" = 1'-0"

DECKING TO STEEL - SEATING

1

3" = 1'-0"

TYP SEAT LIP

Pacific Bench

3/16" STEEL STRIP

2-1/4" NO. 10 CTSK SCREW W/ WASHER AND NUT

(E) CONC. WALL

3" = 1'-0"

1" CTSK SEX BOLT

3/16" STEEL STRIP

1/4" GALVANIZED STEEL BRACE

10

Kevin Nugent

1-1/4" NO. 10 SCREW W/ WASHER AND NUT BACKING

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

(E) CONC. WALL

CONNECTION DETAILS

A5.0

1/2"

1"

1/2" 1 1/2"

20" NOTE: FLIPPED FOR EACH DESK

6"

6"

3 1/2"

6 1/2"

2 1/4"

8 3/4"

1/2" 1"

1/8" HOLES FOR NO. 8 SCREWS

INSTRUCTOR OVERSEEING: Professor JONATHAN REICH

1 1/2"

1/8" HOLE FOR NO. 8 SCREW

STUDENTS INVOLVED:

3

BACK BAR - DESK TYP

1 1/2" = 1'-0"

2

SIDE PIECE - DESK TYP

Nathan Jackson

3" = 1'-0"

Megan Nguyen Kevin Nugent 2"

1"

1" 1/2" 1" 1/2"

CALI BAMBOO COMPOSITE DECKING

3 1/2"

1"

2" ANGLE CHANNEL BEAM

1"

1/4"

2 1/2"

2"

EDGE OF (E) WALL

5

ATTACHED BAR - DESK TYP

1"

3 1/2"

1-1/4" SCREW W/ NUT AND WASHER BACKING

1" SEX BOLT CALI BAMBOO COMPOSITE DECKING

5 1/2"

5 1/2"

1"

2 1/4" TYP 1 1/2"

3 1/2" TYP

31"

3/16" STEEL STRIP

1 1/2" = 1'-0"

Legend

6" TYP.

1/4" 1/4" 1" 1" 1" 3/4"

2"

4 1/2"

1"

Pacific Bench Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

SCREW LAYOUT DETAILS

4

3" = 1'-0"

TYP SCREW DIM - SEATING

1

3" = 1'-0"

TYP SCREW DIM - DESK

A5.1

7/8"

1" 1"

INSTRUCTOR OVERSEEING:

3/4"

2" ANGLE CHANNEL STRIP

1"

15 7/8"

1"

5"

5/16" BOLT HOLE

Professor JONATHAN REICH 5/16" BOLT HOLE

1"

STUDENTS INVOLVED:

4

3

VERTICAL 2" ANGLE

1 1/2" = 1'-0"

1/2" 1"

HORIZONTAL 2" ANGLE

Megan Nguyen

1/2"

2 1/2" 2"

1/2" 1/2"

2 1/2"

1"

Legend

__" DRILLED HOLE FOR SEX BOLT

2 1/4"

NOTE: FOR DRILLED HOLE DIMENSIONS SEE DTL 2 ON A4.1

FOLD AT 90 DEGREES

18 3/4"

2 1/4"

3/16" STEEL STRIP

Pacific Bench

20 1/4"

3 1/2"

1/4" STEEL STRIP

5/16" HOLE FOR 1/2" BOLT

Site Date Drawn by Checked by

2" ANGLE CHANNEL BEAM

1" 1/2"

5/16" BOLT HOLE

3/4"

1" 11/16"

BACK POST

1"

2

3" = 1'-0"

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

FOLD AT 45 DEGREES

5/16" HOLE FOR 1/2" BOLT

5

Kevin Nugent

3 1/2"

SEE SECT 1 ON A3.0 FOR OPTIONS

1 1/16"

1' - 3 1/2"

3' - 4 1/2" or 3' - 10 1/4"

2"

8 A5.0

3 1/2"

2 1/4"

1/2" 1/2"

1 1/2" = 1'-0"

Nathan Jackson

6" = 1'-0"

3"

TOP BRACKET STRIP

1

3" = 1'-0"

TYP FRONT BRACE

BRACKET FABRICATION DETAILS

S1.0

50 ° P TY

16 3/4"

FOR BELOW: TWO PIECES FLIPPED OF FOUR TOTAL PIECES

1 1/2"

2 1/4" 3 1/2" 2 1/4" 3 1/2" 2 1/4"

1 1/2"

2 5/8"

50° P TY 80 .0 0°

INSTRUCTOR OVERSEEING: 1/8" HOLE FOR NO. 8 SCREWS

Professor JONATHAN REICH

5 13/16"

STUDENTS INVOLVED:

7

4

1" ANGLE BAR - WAVE 1

TYP SUPPORT BEAM - WAVE 1

Nathan Jackson

1 1/2" = 1'-0"

6" = 1'-0"

Megan Nguyen

9 7/8" 26 1/8"

7 21/32"

11 7/8"

6"

1 7/8"

Kevin Nugent

67 .00 °

° .00 67

1/8" HOLE FOR NO. 8 SCREWS

3 7/8"

Legend

5 3/4" 11 3/4"

1/8" HOLE FOR NO. 8 SCREWS

50.

00°

3 29/32"

9 7/8"

3

LEFT REAR BAR - WAVE 1

REAR BAR - WAVE 1

20 1/4"

6

1 1/2" = 1'-0"

3" = 1'-0"

20"

20 1/2" 3 1/8" 6 1/2" 1" 6 1/2"

6"

6 1/2" 1" 1/2"

46.

12 3/4"

00°

43 .

6 1/2"

2 3/4"

1/8" HOLE FOR NO. 8 SCREWS

Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

WAVE 1 DETAILS 1/ 2"

00°

23 1/4"

Pacific Bench

2 3/4"

31 15/16"

50.

00°

5

31 1/8"

5

1 1/2" = 1'-0"

LEFT FRONT BAR - WAVE 1

2

1" = 1'-0"

FRONT BAR - WAVE 1

1

1" = 1'-0"

WAVE 1 FRAMING PLAN

S2.0

4 1/2"

14 9/16"

60 °T YP

INSTRUCTOR OVERSEEING:

12 3/4"

12 1/2"

5

Professor JONATHAN REICH

STUDENTS INVOLVED:

WAVE 2 GROUNDING BAR

Nathan Jackson

1 1/2" = 1'-0"

Megan Nguyen Kevin Nugent

60 .00 °

YP °T 60

20"

Legend

2

WAVE 2 ELEVATION

1 1/2" = 1'-0"

12 11/16"

1 5/32" 3"

2" 5 3/16"

1" ANGLE SIDE - WAVE 2

4

REAR BAR - WAVE 2

3 1/2"

7

1 1/2" = 1'-0"

6" = 1'-0"

2' - 10 11/16"

6"

1/2" 12 11/16"

1/8" HOLE FOR NO. 8 SCREW

20"

Site Date Drawn by Checked by

12 3/4"

1/2" 1" 6 1/2"

1" 6 1/2"

33"

4 9/16"

WELD 1" ANGLE STRIP HERE

34 11/16" 60 °T YP

1" ANGLE TOP - WAVE 2

7 1/8"

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

WAVE 2 DETAILS

° .00 60

6

6" = 1'-0"

Pacific Bench

3

1" = 1'-0"

FRONT BAR - WAVE 2

1

1" = 1'-0"

WAVE 2 FRAMING PLAN

S2.1

INSTRUCTOR OVERSEEING: Professor JONATHAN REICH

STUDENTS INVOLVED: Nathan Jackson Megan Nguyen Kevin Nugent

Legend

Pacific Bench Site Date Drawn by Checked by

Cal Poly San Luis Obispo May 29, 2019 N.J., M.N., K.N.

MATERIAL INVENTORY

M0.1