12P Hex The 12P Hex is a versatile LED Par fixture with 12x12-Watt, 6-IN-1 HEX LEDs. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Features: Ultra bright, flat wash fixture with 12 x Red, Green, Blue, Amber, White & UV LED pixels Smoot RGBAW + UV color mixing Cooled by quiet fans Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Intelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss 5 Operational modes: Static Color Mode, RGBAW & UV Dimmer Mode, Program Mode, Sound Active Mode and DMX Controlled 7 Built-In Programs 63 built-in Color Macros Flicker Free operation (No flickering on camera) 5 selectable Dimmer Curves (Standard, Stage, TV, Architectural & Theatre) LED pulse and strobe effect Electronic Dimming: 0 - 100% Includes metal gel frame
Specs: 4 DMX modes: 6, 7, 8, & 12 channel Beam angle: 30-degree 4-button, DMX digital display on rear panel Dual yoke allows fixture to be hung or set on the ground Data linkable via 3-pin XLR cables Power linkable via IEC power cables. (6x 12P Hex’s Max @ 110V, 13x 12P Hex’s Max @ 240V) Light Source: 12x 12-Watt RGBAW + UV LEDs, (Rated at approximately 50,000 hrs.) Light Output: 2770 LUX @ 2M; 733 LUX @ 4M (30-degree beam) UV Wavelength: 395nm Refresh Rate: 3.6KHz Power Draw: 150W total (AII LED’s @ Full On) Multi-voltage operation: AC 110-250V, 50/60Hz (IEC power In/Out) Dimensions (LxWxH): 11.75” x 10” x 5.5:/298 x 249 x 136mm Weight: 9 lbs. / 3.9 kgs ETL Approved Compatible with Dotz Par RF wireless remote control (sold separately) Compatible with the Dotz Par RF, easy-to-use, wireless RF remote (Sold Separately). Alternatively the fixture may be operated via a DMX controller or the units built-in programs.
Boom Box FX 2 Put some “BOOM” into your light show! Create pure lighting excitement for any event with the 4-FX-IN-1 Boom Box FX2. Cover the room in light from the classic Derby effect, paint the walls with GOBO effects, wash the dance floor in colors and mesmerize the crowd with the Galaxian style red and green laser! The Boom Box FX2, part of the Startec Series, creates an event to remember! With 4 different lighting effects in one from 9 built-in light shows and 63 preset color combinations you have hours of fun built into one lighting fixture. Features: Part of the Startec Series, the Boom Box FX2 offers 4-FX-IN-1 lighting fixture: a LED Dome effect, a LED GOBO Moonflower, LED Wash FX & Red/Green Laser. High Output 4 FX in 1: Gobo Effect, Moonflower Effect, Strobe/ Chase and green & red laser effect 2 DMX Channel Modes: 3 Channels & 18 DMX Channels 3 Operation modes: Sound Active, Show Mode or DMX Controllable 8 Gobos 9 Exciting built-in shows Strobing Stand Alone or Master/Slave Set Up Linkable via 3-pin XLR cable 4-button DMX display on rear panel UC IR Remote Control (Sold Separately) & Airstream IR Compatible Safety Loop on rear panel Long life LEDs (Rated at approximately 50,000 hours)
Specs: DMX-512 Protocol IEC AC IN/OUT on rear to daisy chain power (9 Fixtures Max. @ 120V and 17 Fixtures Max. @230V) Power Draw: 62W Max (Full ON) Multi Voltage: 100V~240V, 50/60Hz Light Source: Gobos: 8 x 3W LEDs (2 Red, 2 Green, 2 Blue, & 2 White); Derby Effect: 2 x 10W Quad LEDs (RGBW); Wash: 8 x 1W LEDs (2 Red, 2 Green, 2 blue, & 2 Amber) + Red & Green Lasers Dimensions (L x W x H): 9” x 25” x 12.5” / 232 x 634 x 319mm Weight: 15.5 lbs. / 7kg.
COB Cannon Wash The COB Cannon Wash uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash is a QUAD RGBA 4-In-1). It also doubles as an uplight with its dual yoke that act as legs to set the fixture upright to wash walls and ceilings. The COB Cannon Wash comes in a black casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lens are included so that the beam angle may be changed.
Features: Produces powerful, smooth RGBA color mixing with rich palettes of color Use as Wash/par or Pixel Mapped for a stunning visual effect 64 built-in color macros Flicker Free operation (No flickering on camera) Built-in Color Macros 7 DMX Channel modes (3, 4, 5, 6, 7, 9, 10 Ch.) LED pulse and strobe effect Electronic Dimming: 0 -100% 80-degree beam angle Includes lens kit to change to 40-degrees or 50-degrees beam angle
Specs: COB Technology (Chip On Board) with one Quad (4-IN-1) RGBA COB LED Refresh Rate: 1KHz 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre) 3-pin XLR chassis mount connectors for DMX linking PowerCon AC IN/OUT to daisy chain power (up to 5 fixtures) 4-button digital DMX display on rear panel Dual yoke allows fixture to be mounted on truss or set on the ground Light Source: 1x 150-Watt COB Quad LED (RGBA: 4-IN1, rated at approximately 50,000 hrs) Light Output: 1970 LUX @2M; 474 LUX @4M (40-degree beam), 1472 LUX @2M; 373 LUX @4M (50-degree beam), 998 LUX @2M; 238 LUX @4M (80-degree beam) Auto sensing power supply: AC 100V/60Hz - 240V/50Hz Dimensions (LxWxH): 16.25” x 9.75” x 7.5” / 415 x 245 x 192mm Weight: 9 lbs. / 4.1 kg. cETLus Approved (#4002034) Compatible with wireless remote control (sold separately)
ECO UV Bar Plus IR Add excitement to any light show or lighting installation! This ultraviolet LED fixture is great for performance stages, theatrical productions, special effects installations and mobile light show and it offers users more flexibility and control with included IR remote control. Pro version in new extruded aluminum casing now with IR control. Now even brighter. Black Lights add excitement to any light show or lighting installation. The redesigned ECO UV BAR PLUS IR offers the hassle-free use of LED. This ultraviolet LED fixture is great for performance stages, theatrical productions, special effects installations and mobile light show. This fixture requires very little maintenance because its LEDs are rated at 50,000 hours.
Features: Bright, high output ultraviolet bar with 18 x 3-Watt UV LEDs On/Off switch on rear panel LED Strobe effect Includes mounting Brackets for wall/ceiling mount or to set on the floor for wall washing Long Life LEDs
Specs: Beam Angles: 120-degree Power Draw: 60W Multi-voltage operation: AC 100V-240V 50/60Hz Light Source: 18 x 3-Watt UV LEDs Long Life LEDs (Rated at approximately 50,000 hrs.) Refresh Rate: 1 KHz Wavelength: 395-405nm Dimensions (LxWxH): 39.5” x 2.5” x 4.5” / 1000 x 60 x 110.5mm Weight: 6 lbs. / 2.4 kgs. ETL Approved
Focus Spot 3Z The Focus Spot Three Z is a 100W LED Moving Head with motorized focus and motorized zoom allowing for a variable beam angle from 12 to 18 degrees. In addition, the Focus Spot Three Z has one rotating GOBO wheel, one fixed GOBO wheel and one color wheel, letting users generate unique patterns and effects in a series of vibrant hues. There are two 6-facet prisms (one circular and one linear), enabling spellbinding multi-beam effects capable of filling wide spaces with color and movement. Features: High Output 100W LED Moving Head spot with motorized zoom Motorized Focus and Zoom: 12 to 18 degree zoom angle 3 Operational Modes: Sound Active, Show Mode, & DMX Controlled 4 Built-in lighting shows Electronic Dimming: 0 - 100% Electronic Strobe/Pulse effect; random strobe slow to fast 5 Dimming Curves Pan/Tilt Inverse Mode for contrasting movement when fixtures are linked together Fast Pant Tilt Movement Gobo Shake effect Two 6-facet rotating prism effects (one circular & one linear) 16-Bit Fine Pan/Tilt control Stepper motors with micro stepping 3-pin XLR In/Out Includes Omega bracket for truss mounting Fan cooled
Specs: Light Source: 100W High Output LED LUX : 12 Degrees: 12090 @ 3M /18 Degrees: 6300 @ 3M Variable beam angle: 12 ~ 18-degree beam angle 18 & 21 DMX channel modes 8 Colors + Spot 2 Independent Gobo Wheels: Gobo Wheel 1 has 7 Static Gobo’s + Spot; Gobo Wheel 2 has 6 Rotating Gobo’s + Spot Interchange Gobos on wheel 2: 23.8 mm Gobo Size; 10mm Viewable Pan: 540-degree; Tilt: 270-degree PowerCon AC In/Out on rear to daisy chain power (up to 3 Focus Spot Three Z/s @ 120V and 6 Focus Spot Three Z/s @ 230V) PWM (Pulse Width Modulation): 1.2K Strobe Rate: 0.3-20HZ DB Rating @ 1Meter: Front: 52; Back: 50.4; Left:51.1; Right: 50.7; Top: 52.1 Long Life LED (Rated at approximately 50,000 hrs) Multi-voltage Operations: 100-230V, 50Hz/60Hz Power Consumption: 230W Dimensions (LxWxH): 7.25” x 11.25” x 19.75” / 183 x 284 x 489mm Weight: 26 lbs. / 12 kgs. ETL Approved Includes: Omega bracket to hang on truss & 5-foot powerCON power cord
Focus Spot 2 New Focus Series, high powered 75 watt LED with motorized focus, one rotating gobo wheel, one color wheel, gobo indexing, EZ Gobo replacement, built-in 3 watt UV led, DMX, built-in programs, sound active and UC IR wireless remote compatible. The Focus Spot Two is a 75W LED Moving Head with a 3W UV included for black lighting or additional color hues. In addition, has fitted the FS2 with a GOBO wheel with replaceable, rotating and indexable GOBOs. The GOBOs are easy to replace by removing the top housing with one screw that’s on a hinge. GOBOs easily lock in and out of the GOBO wheel. This mover is also equipped with motorized focus, Gobo Indexing, EZ Gobo replacement and a manual zoom knob near the lens to change the beam angle from 15 to 20 degrees. The Focus Spot Two is extremely versatile and has everything lighting professionals are looking for in a an LED spot Moving Head. Features: High Output LED Moving Head spot Motorized Focus 3 Operational Modes: Sound Active, Show Mode, & DMX Controlled 4 Built-in lighting shows 8 Colors + Spot & Split Colors 6 Rotating, replaceable Gobos + Spot Gobo Indexing EZ Gobo replacement with hinged head cover Electronic Dimimng: 0 - 100% 5 Dimmer Curves Pan/Tilt Inverse Mode for contrasting movement when fixtures are linked together Fast Pan Tilt Movement Fan cooled Strobe/Pulse effect; random strobe slow to fast Long Life LED (Rated at approximately 50,000 hrs)
Specs: Manual Zoom knob on head: 15 ~ 20-degree beam angle 16 & 18 DMZX channel modes Gobo size: Outer: 23.8mm / Inner: 19mm / Thickness: 0.2mm Pan: 540-degree; Tilt: 230-degree Gobo Shake effect 6-facet prism effect 16-Bit Fine Pan/Tilt control 4-Button DMX LED menu Stepper motors with micro stepping Includes Omega bracket for truss mounting 3-pin XLR In/Out Uc IR & Airstream IR Compatible (Sold Separately) PowerCon AC In/Out on rear to daisy chain power (up to 14 Focus Spot Two’s @ 120V and 26 Focus Spot Two’s @ 240V) PWM (Pulse Width Modulation): 4K Strobe Rate: 0.3020HZ DB Rating @ 1 Meter: Front 51.4; Back 50.8; Left 51.2; Right: 51.3; Top 46.5 Light Source: 1 x 75W Cold White LED & 3W UV LED Multi-voltage Operation: 100-240V, 50Hz/60Hz Power Consumption: 108W Dimensions (LxWxH): 6.75” x 9.25” x 15.25 / 173 x 237 x 385mm Weight: 16 lbs / 7.3 kgs.
Fog Fury Jett Pro The Fog Fury Jett Pro is a high velocity vertical Fog Machine that mixes color into the fog from. The Fog Fury Jett Pro produces a dry even blast of fog over 40 feet (12 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. The Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts. The Fog Fury Jett Pro may be used vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down. Control options included 3-pin and 5-pin DMX In/Out connections, WiFLY EXR wireless DMX on-board, plus the FFJWR wireless remote comes included in the box. Features: LED and vertical fog effect combination Operates in multiple positions Wireless remote included High output multi-positional vertical fog machine with built in LED lights and wireless DMX control. Vertical or horizontal fogger effect, 1550 watts, quick heat time, includes wireless remote, dmx on board, fluid level indicator.
Specs: Optical: 28 x 3-Watt LEDs (6 Red, 7 Green, 6 Blue, 3 Amber & 6 UV LEDs) Output: 40,000 Cubic Feet Per minute Heater: 1450 Watts Consumption: 1550 Watts Heat Up Time: 9 min Reheating time between intervals: 80 Seconds Fluid Type: Water Based Fog Fluid Fluid Consumption: 150ml/min On board control or Wireless DMX Connections: Data: 3-pin & 5-pin DMX In/Out DMX Channels: 1, 2, 3, 7, & 9 WiFLY EXR Wireless DMX (2,500 feet line of sight) Remote Control Included: FFJWR AC 120V/60Hz or 240/50Hz (non switching) Physical: Dimensions (LxWxH): 16.5” x 12.5” x 8” / 419 x 315 x 206mm Weight: 21 lbs. / 9.5 kg Tank Size: 2.5 Liter removable tank
Fog Fury Jett The Fog Fury Jett is a high velocity vertical Fog Machine that mixes color into the fog using 12x 3-Watt RGBA LEDs. With new advances in heater technology, the Fog Fury Jett produces a dry even blast of fog over 25 feet (7 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts. The Fog Fury Jett may be use vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down. A wireless remote comes included with the Fog Fury Jett. Features: High performance pump for optimum output Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging Convenient carrying handle Low Fluid Indicator on rear Tank can be mounted to either front or rear so that the effect may be pointed up or down 4-button control panel & LCD display on rear panel ADJ’s Electronic Thermo Sensing (ETS) technology 3 Operational modes: Manual, Remote Control, or DMX Controlled
Specs: 700W professional DMX vertical Fog Machine with 12x 3-Watt LEDs 5 DMX Channels, 1, 2, 3 5 or 7 ch 3-pin DMX XLR In/Out connections Warm-up time: 9 min External fog fluid tank: 3 Liter Fog Output: 20,000 (cu.ft/min) Fluid Consumption: 120 ml/min Power Connection: IEC AC In Light Source: 12x 3-Watt LEDs, (3 Red, 3 Green, 3 Blue & 3 Amber LEDs) Heater: 700W Voltage: AC 120V, 230 or 240 50/60Hz (non switching) Power Consumption: 730W (Full on) Dimensions (LxWxH): 15.5” x 12” x 7.5” / 397 x 302 x 191mm Weight: 16 lbs. / 7.1 kg.
Haze Generator The Haze Generator is a great addition to any production. This professional haze machine creates an even mist of fog for a more subtle fog machine effect. It has no warm-up time and is made to last using quality materials and a rigid steel casing. When coupled with LEDs and laser lights, fog effects add to their visibility making your dance floor all the more dynamic and exciting. You can be sure that you are getting the most for your money with this highly affordable and highly effective unit. You’ll have no trouble integrating this easy-to-use fog machine into your current setup thanks to the inclusion of a 30 ft. cable remote with timer, duration and interval control, allowing you to fully manage it from a distance. Comes with free Shipping. No warm-up time necessary 30 foot remote control with timer, haze duration, and interval control Heater-less Odorless Used with an American DJ brand Premium Fog Juice (L2001) Tank capacity: 1.25 liter Output: 1,000 cubic feet per minute Dimensions: 19’’ x 9.75’’ x 9.25’’ Weight: 27 lbs. Available in 120V or 220V operation Uses Haze/G™ oil base liquid only
Haze Juice Thanks to the Haze/G Fog Fluid from ADJ you can make this happen at your next event. Create the effect of a spooky cave or a misty night with this specially formulated and effective fluid. Your crowd will be more than pleased with the haze this liquid will make. Combining a fog machine with lasers and lights makes the light more visible thus creating a far more exciting and dynamic atmosphere. This fog fluid may make your events a hazy but your choice is clear, get American DJ’s Haze/G Fog Mist Fluid today and take your events to a whole new level! This oil-based fluid is designed for use in the ADJ heater-less Haze Generator to produce a fog mist on your stage, dance floor, or other open areas. This is the only liquid that can be used in the ADJ Haze Generators.
Revo 4 IR One of our most popular effects just got better! With amazing Moonflower effects, the Revo 4 IR now includes wireless control options compatible with the UC-IR and Airsteam IR remotes (sold separately). The Revo 4 IR produces a matrix grid of 256 LEDs that creates dozens of different patterns as the red, green, blue and white LEDs are turned on and off and kick up the excitement for any type of party or event with or without the use of fog. The rear panel features a 4-button LED menu display, 3-pin DMX in/Out to link units together and IEC power In/Out to daisy chain the power from one fixture to another. Features: Runs extremely cool! - NO Duty Cycles! – Run all night! Now compatible with UC-IR and Airstream IR wireless controllers (sold separately). LED DMX-512 Moonflower from the popular REVO Series with 256 razor sharp Red, Green, Blue & White Beams Produces unique and exciting LED patterns that may be projected on a wall, ceiling or dance floor – great with or without fog 4-Button LED DMX Display Linkable via XLR connections Wide beam spread covers a large area Sound active from built-in programs Strobe function
Specs: 256 total 5mm LEDs : 64 Red, 64 Green, 64 blue and 64 White 2 DMX Channel Modes (4 Channel mode or 256 Channel mode) 3 operation modes: DMX, Sound Active & Master/Slave Beam angle: 35 degrees Includes hanging bracket & safety loop Power Consumption: 34W maximum Extreme long lifetime of the LEDs (50,000 hr. rating) Compatible with UC IR Remote and Airstream IR (sold Separately) IEC AC IN/OUT on rear to daisy chain power (up to 12 fixtures @ 120V and 21 fixtures @ 230V ) Multi-voltage Operation: AC 100-240V, 50/60Hz Dimensions (LxWxH): 12.25”x 12” x 13.25” / 312 x 306 x 334 mm Weight: 11 lbs. / 4.9 kgs
Starburst The Starburst is a rotating “futuristic Mirrorball” fixture that sends out incredibly concise beams of colored lighting that create a moving array of super-effective ‘stars’ when projected onto walls, ceilings and floors. This ‘night-sky’ effect is enhanced by the unit’s powerful 50W source, which consists of five 15W six-color (RGBAW + PURPLE) LEDs and generates highly powerful beams of light in a wide pallet of colors. Furthermore, the Starburst’s tight beam angle helps the shafts of light cut through darkness and fog to offer a futuristic, far-reaching effect that will transform any small-medium sized venue. Using Sound Active mode, the Starburst’s effects will bounce and rotate in time with the music, for eye-catching, synchronized results. Or, using DMX-Controlled mode, users can go more in-depth with their programming; controlling color, rotation speed and strobing to mesmerized audiences with a varied and exciting display. Comes with free shipping. Features: Sound activated, rotation & speed control via DMX, strobe effect. Produces 34 crisp, bright beams Stand-alone or master-slave set-up 3 Operational Modes: Auto Run, Sound Active, DMX Controlled
Specs: Center Piece Sphere effect with 5 x 10 watt RGBA LEDs. 5 x 15W 6-in-1 HEX RGBWY+UV LEDs (Red, Green, Blue, White, Yellow & Purple) Beam Angle: 1 Degree 13 DMX Channels Multi-Voltage Operation: AC 100~240V, 50/60Hz Dimensions (LxWxH): 12.5’’ x 12.5’’ x 16.25’’ Power Consumption: 55W
Stinger GOBO Cover the room in Gobos, wash the dance floor in colors and mesmerize the crowd with the Galaxian style red and green laser! The 3-FX-IN-1 from the Stinger Gobo helps you create an event to remember! With 3 different lighting effects in one and 6 built-in light shows (Moonflower Gobo effect, color wash effect and a red/green laser effect) you have hours of fun built into one lighting fixture. Features: 3 Operation modes: Sound Active, Show Mode or DMX Controllable 8 Gobo patterns 6 Exciting built-in shows Produces 15 Present Color Combinations Stand Alone or Master/Slave Set Up Linkable via 3-pin XLR cable Strobing 4-button DMX display on rear panel Safety Loop on rear panel UC IR Remote Control (Sold Separately) & Airstream IR Compatible (Transmitter Included) Long life LEDs (Rated at approximately 50,000 hours)
Specs: High Output 3 FX in 1: Gobo Effect, Strobe/Chase and Laser effect with 8 x 3W RGBW LED’s + 8 x 1W RGBA LED’s + Red & Green Lasers 2 DMX Channel Modes: 2 and 14 DMX Channels DMX-512 Protocol No Duty Cycles! - Run all Night! IEC AC IN/OUT on rear to daisy chain power (8 Fixtures Max. @ 120V and 16 Fixtures Max. @230V) Power Draw: 55W Max (Full On) Multi Voltage: 100V~240V, 50/60Hz Light Source: 8 x 3W RGBW + 8 x 1W RGBA LED’s + Red & Green Laser Dimensions (L x W x H): 16.25” x 8.25” x 6” / 410x210x151mm Weight: 11 lbs. / 5kg.
UV COB Cannon With the UV COB Cannon LED Ultraviolet Wash Light, you can create the perfect atmosphere to have your clientele coming back night after night. Ample and well controlled lighting is key to an easily enjoyed performance; the UV COB Cannon excels in providing you with powerful light effects with built-in features that allow for the greatest ease of operation.
Features: Super high output UV light cannon Great for performance stages, theatrical productions and special effects productions Requires almost no maintenance – low heat, low power consumption Advanced COB Technology (Chip On Board) produces powerful, smooth UV color 3 Operation modes: Sound Active, Manual, & DMX 4-button digital DMX display Flicker Free operation (No flickering on camera) Long Life LEDs (Rated at approximately 25,000 hrs.) 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre) Dual yoke allows fixture to be hung or set on the ground LED pulse and strobe effect
Specs: 3 DMX Channel modes: 1, 2 or 3 channel Refresh Rate: 1KHz Electronic Dimming: 0 - 100% Beam angle: 33 degrees DMX Linkable: 3-pin XLR data connectors Power Linkable: PowerCon connectors (Up to 3 UV COB Cannon’s @ 120V, 5 UV COB Cannon’s @ 220V fixtures).
VF Volcano The Volcano is a compact and affordable vertical Fog Machine that mixes color into the fog. With new advances in heater technology, the VF Volcano produces a dry, even blast up to 15 feet (4.5m) in the air! The special heating element design uses an oil-type transmission throughout the pipeline to prevent clogging. It is equipped with a high performance Italian pump system for optimum output. The Electronic Thermo Sensing technology maintains optimum heating levels with a short warm-up time between blasts. Features: Has 6 x 3 watt RGB color LEDs Compatible with Premium Fog Juice 2 Operational modes: Manual & Remote Control Convenient carrying handle The wireless remote comes included
Specs: 750W professional vertical Fog Machine Warm-up time: 6 min Output time: 8 seconds (max) Re heat interval: 9.3 seconds (Average) External fog fluid tank: 1 Liter Fog Output: 8,000 (cu.ft/min) Fluid consumption: IEC AC In Light source: 6 x 3-Watt LEDs, (2 Red, 2 Green & 2 Blue LEDs) Heater: 750W Voltage: AC 120V or 240 50/60Hz (non switching) Power Consumption: 770W Fluid consumption: 14ml/min Dimensions (LxWxH): 13’’ x 8.25’’ x 7’’ Weight: 7.4 lbs The VF Volcano should only be used in a position so fog is shooting upright.
PUT YOUR LOGO IN LIGHTS!
Customizable GOBO Take your light show to an entirely new level using custom GOBOs! These fully customizable GOBOs can be created to fit in any light. They are high quality steel, at an affordable price.
Fog Fluid Fog Juice is great for special effects, parties, atmosphere, dance floors and more! Composed of filtered water and pharmaceutical grade ingredients, this juice runs through a water-based fog machine and produces thick billows of white fog. Fog is useful for revealing the intensity and color of lights and laser beams in your special effects display and helps create an exciting atmosphere! Features: 4 Liters Creates thick white fog Great for events, special effects, dance floors and more! Pharmaceutical grade ingredients Quality fog juice for nearly all fog machines Water-based High chemical purity Produces white fog 3 year shelf life
Quick Dissipating Fog Fluid Quick-Dissipating fog fluid is a water-based fog juice specially formulated to create thick clouds of fog that dissipate in seconds. When used with the VF Volcano, Fog Fury Jett, or Fog Fury Jett Pro fog machines, it emulates a CO2 effect that allows frequent bursts of eye-catching fog effects for event spaces, dance floors, parties and more! Features: Composition: Water Base, Diethylenglycol-free (DEG-free), Glycerin-free. 4 Liters/ 1 Gallon Non-toxic and FDA approved Water-based fluid leaves no residue
Pro Clamp
O-Clamp
The Pro-Clamp is a 360 degree aluminum clamp that has a max rating of 1,100 lbs. Bring safety and stability to your performance with this clamp. It tightens down securely to ensure you get that locked-in feel. It also includes a wing nut, standard nuts, and washers. Make sure to always make safety the first priority of your show.
Bring safety and stability to your performance with this clamp. The O-Clamp is a 360 degree clamp that wraps around truss tubing. It’s designed to securely mount fixtures to trusses. It tightens down securely to ensure you get the locked-in feel.
Features: Heavy Duty Aluminum Clamp 360º Wrap Around Style Fits 1.5 in. to 2 in. diameter Pipe Standard course 3/8” bolt to hang Standard course 1/2” swing bolt to clamp Wing nut, standard nuts & washers included Max Rating: 1100 lbs Weight: 1.3 lbs
Features: Adjustable size: 1.5 - 2 in. 360 degree clamp that wraps around truss tubing Securely mounts fixtures to trusses Non scuffing - Non scratching - Non scoring - Non denting Specs: Works great for the LTS-1, LTS-2, and the LTS-30 lighting stands Weight limit: 28 lbs. / 13 kg. Fits 1.5-inch Truss when using the supplied adapter Fits 2-inch Truss when the supplied adapter is removed from the O-Clamp
Square Truss This truss is very strong and durable, yet nicely finished to serve any decorative needs. Built to the highest standards of safety and performance, thicker truss ends provide special reinforcement, creating stronger connection points than other brands offer. Connection hardware for one end is included (1 set per section). A wide variety of compatible corners are available. Use conical couplers for easy and quick assembly. Features: 6 feet (2m long) 11-7/16’’ wide 2’’ diameter main tube 3/4’’ diameter brace tube 0.08’’ wall thickness
3’ & 6’ IEC Jumper These black IEC power link cables from AccuCable are compatible with fixtures that include IEC power input and output. It is great for linking LED fixtures together to be powered from one source. Made from the highest quality materials and offers professional design with simple use. Features: Strong, sturdy construction Easy to install and use Professional design with an excellent fit and finish Specs: Color: Black Length: 3 ft and 6 ft. Gauge: 16/3 Connections: IEC Male to IEC Female Amp Rating: 15A
Powercon Cable M-F 5’ These PowerCon cables are built to exceed the highest quality standards through strict manufacturing and testing processes. The cables are rated for 20A/250V AC and color-coded for easy connectivity. Professional grade PowerCon Power-In to PowerCon Power-Out plastic connectors 250V/20A 14 AWG CSA, MSHA & RoHS listed 3-Conductor Seoprene Heavy Duty Power Cord Lockable 3-pole connector with contacts for line, neutral, and premating safety grounds
Safety Flashlight
Desk Lamp
See and be seen! This safety flashlight has LED bulbs that project an intense beam of light up to 600 ft., with a 300 Lumen Max Output.
These energy efficient, touch-controlled lamps are ideal for use as reading lights, desk lamps, craftwork lights, and emergency lights. Natural and non-flickering light with a lifespan of over 50,000 hours.
Features: Size: 3.7 in. x 1.02 in. Battery Required (Not included). Takes types: 1*AA or 1*14500 3.7v Light Modes: High/Low/Strobe Adjustable Focus Range: Zoom in for an intense beam or out for wider illumination
Features: Dimmable: 7 brightness levels (40%-100%) to meet different brightness needs. Flexible to use: 150 degrees vertical rotating lamp head and 180 degrees horizontal rotating lam arm ​Dimensions: L 7.48 in. x W 5.12 in. x H 16.34 in. Touch Control System: Control 7 brightness levels by touch Working Voltage: 12 V DC 6W, Dimmable LED, Daylight White, Max Brightness: 350 LM
Speakers Speaker- Sense 8 All of our Sense speakers were designed to be a multi-functional speaker in a compact and lightweight speaker system that’s able to handle the demand of even the most ambitious sound systems. The Sense Series features parallel four pole twist-lock connectors, heavy-duty powder coated steel grills with acoustic foam lining, and integrated M8 rigging points in all corners. Specs: Woofer: 8” AA PA850, Aluminium basket, 50mm voice coil Dimensions (LxWxH): 9.8 x 17.2 x 9.1 (inches) Weight: 22.1 lbs. High Driver: 1” compression driver with 44mm voice coil mounted on a 90°x 60° CD horn Power Handling: 175W continuous, 350W program, 700W peak Recommended input power: 100-250W @ 8Ohm Sensitivity: 3dB SPL, 121 dB Peak Impedance: 8Ohm X-Over: 2800 Hz 12dB/18dB Connector: 2x Speakon connectors Speaker- Sense 12 The Sense 12 Speakers are flexible enough to meet all your high-end requirements without missing a beat. The Sense Series features parallel four pole twist-lock connectors, heavy-duty powder coated steel grills with acoustic foam lining, and integrated M10 rigging points in all corners. Specs: Woofer: 12” AA PA1575, aluminum basket, 75mm voice coil Dimensions (LxWxH): 14.2 x 25.2 x 12.8 (inches) Weight: 39.7 lbs. High Driver: 1” compression driver with 44mm (1.75”) voice coil mounted on a 75°x 50° CD Horn Power Handling: 350W continuous, 700W program, 1400W peak Recommended input power: 250-500W @ 8Ohm Sensitivity: 98dB SPLmax., 128dB Peak Impedance: 8 Ohm X-Over: 1800 Hz 12dB/18dB Connector: 2x Speakon connectors
Speaker- Sense 15 The Sense Series is a multi-functional, compact, and lightweight speaker system for flexible yet ambitious sound applications, and it won’t break your budget.The asymmetric design allows for use as floor monitors while reducing undesirable internal reflections and resonance. The Sense Series features parallel four pole twist-lock connectors, heavy-duty powder coated steel grills with acoustic foam lining, and integrated M10 rigging points in all corners. Specs: Woofer: 15” AA PA1575, aluminum basket, 75mm voice coil Dimensions (LxWxH): 430x678x370mm Weight: 48.5 lbs. High Driver: 1” compression driver with 44mm (1.75”) voice coil on a 75°x 50° CD horn Power Handling: 400W continuous, 800W program, 1600W peak Recommended input power: 300-600W an 8Ohm Sensitivity: 98dB SPLmax. 129 dB Peak Impedance: 8Ohm X-Over: 1800 Hz 12dB/18dB Connector: 2x Speakon connectors Subwoofer- Sense 18B The Sense 18B Subwoofer is flexible enough to meet all your high-end requirements without missing a beat since it was designed to be a compact and lightweight speaker system to handle the demand of even the most ambitious sound systems. It is ideal for mobile and installed applications. The Sense Series features parallel four pole twist-lock connectors and integrated M8 rigging points in all corners. Specs: Woofer: 18” AA PA18000, aluminum basket, 100mm Voice coil Dimensions (LxWxH): 20.5 x 25.6 x 23.6 (inches) Weight: 72.8 lbs. Power Handling: 600W continuous, 1200W program, 2400W peak Recommended input power: 400-800 W @ 8Ohm Components: 18” Long-excursion woofer Sensitivity (Half Space): 103 dB SPL, 136 dB Peak Impedance: 8 Ohm Connector: 2x Speakon connectors Pole mount: integrated (M20)
Amp- Low Level The American Audio V4002 is a professional power amplifier with power ratings of 1600W Stereo @ 2 Ohms and 3200W Bridged Mono @ 4 Ohms. Features: • Controls Front: Volume control by 21 detent potentiometer for each channel • Controls Rear: Mode Selector Switch (Parallel/Stereo/Bridged Mono) • High Pass Filter (HPF): On/Off switch for each channel • Limiter: On/Off switch for each channel • Connectors Input: Combo jack electronically balanced & XLR Male for input link • Connectors Output: 5-way binding post & Speakon for each channel • Indicators: Signal: -20dB, -10dB, 0dB, Clip, Protect & Active • Protections: output current limiting, thermal protection, DC offset protection & circuit breaker • Two variable speed fans Specs: Dimensions (LxWxH): 19”x17.5”x 3.5 (inches) 700W Stereo @ 8 Ohms (1 kHz, THD 1%) 1100W Stereo @ 4 Ohms (1 kHz, THD 1%) 1600W Stereo @ 2 Ohms (1 kHz, THD 1%) 2200W Bridged Mono @ 8 Ohms (1 kHz, THD 1%) 3200W Bridged Mono @ 4 Ohms (1 kHz, THD 1%) Input Sensitivity (4 Ohms, 1 kHz): 4dB Input Impedance: 30k Ohms Balanced / 15k Ohms Unbalanced Input CMRR (1kHz): >60dB Slew Rate (8 Ohms): 40 V/msec Frequency Response (±0.5dB): 20Hz - 20kHz Amplifier Class: H T.H.D. (1 kHz, rated power): <0.03% Signal to noise ratio: >100dB Damping Factor (8 Ohms, 1kHz): >350 Channel separation: >80dB Power source: AC 100-240V, 50/60Hz Weight: 44 lbs. / 20kg.