1
CHIPPO 5010 C direct Mobile drum chipper
2
chippo 5010 C direct
Chippo 5010 C direct The name CHIPPO is synonymous with a new generation of mobile chipping machines from Komptech. Anyone opting for a CHIPPO is opting for the highest level of wood chipping quality at the lowest operating costs. The new CHIPPO 5010 C direct is a mounted variant driven directly from the lorry. The CHIPPO module sits directly above the two rear axles powered, guaranteeing traction in virtually all conditions. If deployment on extreme terrain is intended, a variant with a front axle powered with Hydrodrive can be chosen as an option. The operator sits in the comfortable lorry cab on the converted passenger seat and is able to concentrate fully on working with the powerful machine. The loading crane with integrated crane cab variant offers a perfect view from above. The active feed system, two different drum speeds and selection of material discharge via blower or conveyor belt are further distinguishing features of the CHIPPO 5010 C direct.
Throughput Trunk wood hard:
to Ă˜560 mm
Trunk wood soft:
to Ă˜750 mm
Throughput: to 220 m3/h (depending on material)
3
Highlights The best feed system The feed system is comprised of a large feed table with slat conveyor, a transfer roller and two horizontal and (optionally) two vertical feed rollers. This configuration guarantees reliable grabbing and active forwarding to the drum, and at the same time prevents lateral turning of the residual fraction. Bulky pruning are pre-compressed by the vertical feed rollers, fed into the chipping duct and chipped to precision.
Perfect wood chippings: Large drum and long blade advance The chipping process is extremely efficient with the large, open drum (inlet height 750 mm) and the ideally positioned countercutter. The long advance of the sturdy chipping blade produces uniform shape and size with a minimum of fine fractions. A simple adjustment mechanism on the movable counterblade carrier allows quick and precise cutting gap adjustment after every sharpening process.
Efficient chipping with two speeds The shredding speed is adapted to the material on the CHIPPO. This means higher drum speed and hence higher cut frequency for smallwood and pruning, or reduced rotation speed but higher cutting power for trunk wood. The two speeds are realised with a control gear situated on the drum.
Blockage-free For wet material, the screen basket can be rotated hydraulically without interrupting operation. In the event of discharge overload, feed is interrupted and is not continued until the controller gives the go-ahead.
Discharge selection: Blower or conveyor Either a blower, configurable precisely to requirements with variable speed, or a pivotable rear conveyor belt (more gentle on the material and energy-saving) is used for discharge.
Sturdy design The sturdy design and premium-quality components guarantee high fatigue strength of the machine and ensure long service life. A special blade fastener with contrary protection reduces secondary damage on contact with contraries.
4
5600 mm
5000 mm
Technical specifications
CHIPPO 5010 C direct
44째
7550 mm
13700 mm
chippo 5010 c direct Drive
via lorry diesel engine (MAN) with special power divider 353 kW / 480 HP
Chipping unit / drum (C...cross feeding) Length: Diameter: Feed width: Feed height: Drum rotation speed: Number of blades:
1000 mm 1050 mm 1000 mm / 1610 mm with vertical feed rollers 750 mm 400 and 560 rpm 12
Splitter
Splitting force: Splitting depth:
max. 40 t 1300 mm
Loading heights
Fill height: Length of feed table: Discharge height of conveyor belt: Blower pipe length: max. hight blower pipe: Discharge range:
1910 mm 2515 mm ~5m 1500 or 2500 mm 5600 mm 20 m
Transport dimensions
L x W x H with conveyor belt (without conveyor belt):
8031 (9675) x 2550 x 4000 mm
Weight without conveyor belt:
< 26000 kg
Throughput (depending on material)
to 220 m3/h
Additional equipment
Two drum speeds, Automatic screen basket discharge, Screen basket 45, 60, 80 mm, Hopper extension, Vertical feed rollers, Automatic regulation of feed speed, Blower discharge pipe 2.5 m, Variable blower speed, Preparation conveyor belt discharge, Discharge conveyor belt, Central lubrication, Lorry MAN (3-axle/4-axle, long cabin/short cabin), Epsilon wood-loading crane (with cabin/without cabin), Wood gripper, Remote control, Wood splitter and further on request
Komptech GmbH K체hau 37 A-8130 Frohnleiten [t] +43 3126 505 - 0 [f] +43 3126 505 - 505 [e] info@komptech.com
Komptech UK Ltd. Forge End, Lodge Farm Kineton, Warwickshire, CV35 0JH [t] +44 1926 64 29 72 [f] +44 1926 64 29 71 [e] info.uk@komptech.com
www.komptech.com
We reserve the right to make technical changes due to ongoing development.
E_04/2010