1
CHIPPO 510 C Tractor-driven drum chipper
2
chippo 510 C
Chippo 510 C The name CHIPPO is synonymous with a new generation of mobile chipping machines from Komptech. Anyone opting for a CHIPPO is opting for the highest level of wood chipping quality at the lowest operating costs. The CHIPPO 510 C is a tractor-driven drum chipper for wood trunks and pruning. The machine is designed for a drive rating of up to 500 HP, meaning the CHIPPO 510 C is currently the most powerful chipper in this class. An active feed system, two different drum speeds and selection of material discharge via blower or conveyor belt make the CHIPPO 510 C a genuine all-rounder. In the base configuration, the CHIPPO 510 C has a sturdy 65 km/h chassis with tandem axle. Numerous options for the tyres, the pulling mechanism and the loading crane simplify the tailoring to customer requirements. Frame and panelling are designed for a high degree of stability and doors and flaps simplify access for servicing.
Throughput Trunk wood hard:
to Ă˜560 mm
Trunk wood soft:
to Ă˜750 mm
Throughput: to 180 m3/h (depending on material)
3
Highlights The best feed system The feed system is comprised of a large feed table with slat conveyor, a transfer roller and two horizontal and optionally two vertical feed rollers. This configuration guarantees reliable grabbing and active forwarding to the drum, and at the same time prevents lateral turning of the residual fraction. Bulky pruning are pre-compressed by the vertical feed rollers, fed into the chipping duct and chipped to precision.
Perfect wood chippings: Large drum and long blade advance The chipping process is extremely efficient with the large, open drum (inlet height 750 mm) and the ideally positioned countercutter. The long advance of the sturdy chipping blade produces uniform shape and size with a minimum of fine fractions. A simple adjustment mechanism on the movable counterblade carrier allows quick and precise cutting gap adjustment after every sharpening process.
Efficient chipping with two speeds The shredding speed is adapted to the material on the CHIPPO. This means higher drum speed and hence higher cut frequency for smallwood and pruning, or reduced rotation speed but higher cutting power for trunk wood. The two speeds are realised with two belt pulleys situated on the drum.
Blockage-free For wet material, the screen basket can be rotated hydraulically without interrupting operation. In the event of discharge overload, feed is interrupted and is not continued until the controller gives the go-ahead.
Discharge selection: Blower or conveyor Either a blower, configurable precisely to requirements with variable speed, or a pivotable rear conveyor belt (more gentle on the material and energy-saving) is used for discharge.
Sturdy design The sturdy design and premium-quality components guarantee high fatigue strength of the machine and ensure long service life. A special blade fastener with contrary protection reduces secondary damage on contact with contraries.
4
5053 mm
5250 mm
Technical specifications
CHIPPO 510 C
47째
12366 mm
6440 mm
chippo 510 c Drive
Drive via PTO Tractor up to 370 kW / 500 HP
Chassis Type: Tyres:
Central axle trailer with rigid drawbar 385/65 R22.5
Chipping unit / drum (C...cross feeding) Lenght: Diameter: Feeder width: Feeder height: Drum rotation speed: Number of blades:
1000 mm 1050 mm 1000 mm / 1610 mm with vertical feed rollers 750 mm 400 and 560 rpm 12
Loading heights
Fill height: Length of feed table: Discharge height of conveyor belt: Blower pipe length: max. hight blower pipe: Discharge range:
1550 mm 2400 mm ~ 4,5 m 1500 or 2500 mm 5250 mm 20 m
Transport dimension
L x W x H: (without conveyor belt and crane)
7168 x 2550 x 3750 mm
Weight with conveyor belt and crane: Throughput
~ 18000 kg
Throughput (depending on material):
Additional equipment
Komptech GmbH K체hau 37 A-8130 Frohnleiten [t] +43 3126 505 - 0 [f] +43 3126 505 - 505 [e] info@komptech.com
to 180 m3/h Two drum speeds, Automatic screen basket discharge, Screen basket 45, 60, 80 mm, Hopper extension, Vertical feed rollers, Automatic regulation of feed speed, Blower discharge pipe 2.5m, Variable blower speed, Preparation conveyor belt discharge, Discharge conveyor belt, Tyres 425/65 R22.5, Tyres 600/50 R22, different towing eyes, Central lubrication, Epsilon wood-loading crane, "Type A" crane support, Wood gripper, Remote control, Wood splitter, Automatic draw bar and further on request
Komptech UK Ltd. Forge End, Lodge Farm Kineton, Warwickshire, CV35 0JH [t] +44 1926 64 29 72 [f] +44 1926 64 29 71 [e] info.uk@komptech.com
www.komptech.com
We reserve the right to make technical changes due to ongoing development.
E_10/2009