Pipe radiators from Brakon

PIPE RADIATORS FROM

WORKS WHERE OTHER HEATING DEVICES ARE USELESS

Smooth pipe radiators are SELF-PROTECTED against overheating In contrast to other heating devices, smooth pipe radiators are self-protected against overheating. Radiators normally switch off if they are covered. An electrician must often be called for a restart.

If a smooth pipe radiator should be covered, overheating does not occur. The radiator is constructed so as to tolerate being covered.

This is a great advantage in apartment building stairways, car washes and public baths.

The smooth pipe radiators have 3 settings (2 elements). If only setting 1 is connected, the radiator is childsafe with a maximum surface temperature of 60oC. This makes the radiators an ideal supplementary heating source in nurseries.

Pipe radiators are DUSTand WATERTIGHT (IP67) Pipe radiators are very practical in more rugged environments. They tolerate impact and may be installed in areas with water sprayed under pressure. Poultry buildings, stables, pigpens, industrial buildings, sewage disposal plants and garages are typical examples of places where pipe radiators are a wise choice.

Pipe radiators are powder coated. In especially rugged environments galvanized radiators are recommended.

The solution where the requirements are great

Our radiators are widely used because they offer architects, electrical contractors, installers and customers several advantages.

More and more people are discovering that pipe radiators are an excellent alternative to other systems.

Backer’s pipe radiators are useful in a variety of environments: office complexes, nursery schools, transit halls and more rugged and even wet environments. Pipe radiators are practical and well-suited to everything from concealed under floor installations and installations in front of full length windows, to wall-mounted installations in livestock and poultry buildings.

More and more customers are realizing that pipe radiators are an excellent alternative to ordinary heating units.

Technical specifications Ribbed Pipe Radiators 230 volts. IP Class: 67 (dust- and watertight).

Ribbed pipe radiator without switch, for wall or floor installation, in convector cabinet with air vents on the top and front, or recessed in floor with rist grating.

The radiators have a built-in overheat protection device which switches the radiator off if it is covered or gets too warm. The overheat protection device must be placed beneath the heating element. The cable inlet on the radiator must therefore always face downward when mounted. The overheat protection device must be reset manually. Delivered ready for 1 piece PG 11 nipple or protectice tubing.

Connector: 3 x 6 mm2 + ground.

Additional connections It is not possible to make additional connections in the radiator. The minimum distance to building parts over, under and from the end of the radiators: 150, 39 , 10 mm.

Standard colours Gray RAL 9006 or heat galvanized (unpainted).

Special colours can be supplied.

(RAL coding must be provided)

Type

Settings (W)

Length (mm)

Distance fasteners (mm)

RR 400 W RR 600 W RR 800 W RR 1000 W RR 1400 W RR 800 W G RRU 250 * RRU 600 *

133 - 267 - 400 200 - 400 - 600 267 - 533 - 800 333 - 667 - 1000 467 - 933 - 1400 267 - 533 - 800 83 - 167 - 250 200 - 400 - 600

733 1010 1284 1560 2112 1284 526 1010

685 962 1236 1512 2064 1236 478 962

Ribbed Pipe Radiators Ribbed Pipe Radiators Max Max

200 200 Min 30 Min 30

110 110

Colour Gray RAL 9006 Gray RAL 9006 Gray RAL 9006 Gray RAL 9006 Gray RAL 9006 Heatgalvanized Gray RAL 9006 Gray RAL 9006

The least sizes in convector The least sizes in convector cabinet with air vents 200 cabinet with air vents 200 Min 10 Min 10

185 40 185 40

Air vents Air vents

L L

A A

Min. cabinet length: Radiator lenght + 20 mm Min. cabinet length: Radiator lenght + 20 mm

Recessed in floor with rist grating Recessed in floor with rist grating VETAL RIST grating 30 x 30 mm VETAL RIST grating 30 x 30 mm Min 40 Min 40

Min 250 Min 250

Min. 64 Min. 64

Min 250 Min 250 122 122

Min. 64 Min. 64

nts

Smooth Pipe Radiators 230 volts. IP Class: 67 (dust- and watertight).

Smooth pipe radiator without switch for installation on wall or floor. Diameter: 76 mm | Height: 150 mm Minimum distance to building parts over, under and from the end of the radiator: 100, 62, 10 mm.

The radiator is heat protected, i.e. the radiator will never get so hot that it will cause a fire, even when covered. (When covered at 25oC room temperature: maximum 175oC). When only setting 1 is connected, the radiator is child safe with a maximum surface temperature of 60oC. Delivered ready for 1 piece PG 11 nipple or protective tubing.

Connector: 3 x 6 mm2 + ground. It is not possible to make additional connections in the radiator.

Standard colours Gray RAL 7035 or heat galvanized (unpainted).

Special colours can be supplied.

(RAL coding must be provided)

Type

Settings (W)

Length (mm)

Distance fasteners (mm)

GR 300 W GR 600 W GR 600 W G

128 - 172 - 300 256 - 344 - 600 256 - 344 - 600

1868 3512 3512

1820 3464 3464

Max

200 Min 30

110

Min 10

L

A

Colour Gray Gray Heatgalvanized

Hat rack- and shoe rack heaters coming soon!

Read more in our other brochure!